|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Wichita, United States DESCRIPTION: For sale in good used condition is a Tokimec/Vickers Hydraulic Power Unit. Item weights 1600 pounds on a skid. SPECIFICATIONS: Part# PVQG3C2NFSIS2-CS2-1 ... more20 HP 30 GPM Pump: Pressure Compensated Piston Pump 3000 PSI Rated Tank: 56" L X 18" W X 23" H 100 Gallon Tank Misc: Relief/ Suction/ Return Filters Temp/Level Switch 14 Day Warranty
Buy It Now
Condition: Used Location: Wichita, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Sterling Heights, United States If your vehicle was not originally equipped with the EXACT part(s) listed, it is your responsibility to consult a dealer to see if it will fit your application. ... moreLook at the size and numbers we have listed above.
Buy It Now
Condition: Used Location: Scottsburg, United States Used. We can load onto your truck.
Buy It Now
Condition: Used Location: Brookpark, United States KR WILSON #37MD-4 30TON HYD. Paste link into a browser window:[isdntekvideo]. Video will open in a new window. -- ADJUSTABLE TABLE. we can either use ... moreyour account number or provide a rate quote. We have a loading dock and fork lifts with the ability to load any type of truck.
Buy It Now
Condition: Used Location: Glassboro, United States Model: PEM5025. MPN: PEM5025. Small orders are no problem. Lot# CC223 W2. Condition: Used. Your Best Work Starts Here™. Be sure to add us to yourfavorites ... morelist !
Buy It Now
Condition: Used Location: Pomona, United States Bending Angle: 0-135 Degrees. Bending Length: 48". Net Weight: 2,600 lbs. Motor: 2 HP. Min Reverse Bend: 1/2".
Buy It Now
Condition: Used Location: Watertown, United States Marathon Electric Motor. Make: Great Lakes Hydraulics. Rigging and Hauling Fees are not included in the Asset Sale Price. 3.5 gallon reservoir. Freight ... moremay be booked with any carrier, but usually goes out on the best available.
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Condition: New – Open box Location: Coloma, United States ELECTRICAL AND HYDRAULIC SCHEMATIC INCLUDED.
Buy It Now
$14.95 Shipping Condition: New Location: Beaver Dam, United States
Buy It Now
$53.20 Shipping Condition: Used Location: Bay Shore, United States Good usable Condition.
Buy It Now
$20.10 Shipping Condition: New Location: Chardon, United States This was in a unit with a lot of really unique stuff! That, and storage units…. NEW General Motors Genuine part. More than likely, there is NO WARRRANTY. ... more^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^.
Buy It Now
Condition: Used Location: Coffeyville, United States SHOWA HYDRAULIC POWER UNIT, PVU-55-0405-HX54-R6, PRESSURE 35, MOTOR 1.5, 50/60HZ SHOWA HYDRAULIC POWER UNITPVU-55-0405-HX54-R6PRESSURE 35MOTOR 1.550/60HZMFG ... moreNO. 00838AAPPROX. Approximate weight: 275 lbs.
Buy It Now
$246.00 Shipping Condition: New Location: 朝阳区, China Mold standard: φ6.5, φ9, φ13, φ17, φ20.5. Angle iron: 3-6.3# angle iron. Output: 10T. Model: MHP-20 angle steel. Throat depth: 40mm.
Buy It Now
$288.00 Shipping Condition: New Location: Mercersburg, United States Great for lifting products & materials to feed into CNC and other machines at a specific height, or simply as a lifting work area. Powerful Lift + Work ... moreTable all in one! - Lift height: 9" - 39". - 110v/ 115v/ 120volt Electric Cord powered.
Buy It Now
$650.00 Shipping Condition: For parts or not working Location: Chino Hills, United States Nugier hydraulic press 40 ton, H40-7, air power, am not sure where to hook up the air power supply, i tried 2 different position's where it has pipe plugs ... moreon the 4 way lever switch. When i hooked up air power and i pushed lever switch the ram would decent 2" and nothing else, when i disconnect the air supply it sprayed oil. If you know where the air supply should go let me and I'll try and send video. I just don't want to keep spraying oil all over the place. I think it's in working condition, i just don't know where the air supply should go to. Forklift on site to help load, free pick up or shipping to the lower 48 states. Dimension; 45" wide x 30" deep x 79" tall, weights 555 pounds.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 01240980018. Manufacturer: ENERPAC. Capacity: 10.5 HP. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads ... moreor partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Condition: Used Location: Salem, United States .Heated and Cooled Reservoir w/ 150 Gallon Capacity. Hydraulic Power Unit. Comprised of 3 Driving Motors. Eaton Motors: 57 GPM Capacity. Year: 1998.Vickers ... moreCirculating Pump: 18 GPM Capacity.
Buy It Now
Condition: Used Location: Toledo, United States HYDRAULIC PUMP & TANK UNIT PORTABLE ON WHEELS.
Buy It Now
Condition: Used Location: Oxnard, United States HYDROTECH HYDRAULIC POWER UNIT INCL TANK PUMP MOTOR VALVE ETC. HU00543 JM. REMOVED FROM CINCINNATI MILACRON CNC TURNING CENTER / LATHE MODEL TALON 208.
Buy It Now
Condition: Used Location: Toledo, United States WA WHITNEY WEB PUNCH. W A WHITNEY HYDRAULIC POWER UNIT. CAPACITY. . 70 TON. LOWER DIE TO BOTTOM PUNCH. HOLE CAPACITY. . 1-1/8" IN 5/8" PLATE. OPENING ... moreOF C. 12".
Buy It Now
Condition: Used Location: Lincolnshire, United States SR Evolution Model Variation - Variation 2. Front Off-Center Drilling. - Variation 3. Main/Sub Spidle Rigid Tapping. - Variation 4.Main-Sub Spinlde Simultaneous ... moreDrilling.
Buy It Now
Condition: Used Location: Toledo, United States Hydraulic self-compensating hold-down bar assembly. Hydraulic fluid. Mild Steel Capacity: 10 gauge (3.4mm). Stainless Capacity: 14 gauge (2.0mm). 4 foot ... moresquaring arm with inlaid scale. Light beam gauge (shadow line).
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 12V car pipe press is used to compress and shrink the hose or tubing, which can be placed on the car and is suitable for outdoor workers. The power of ... morethe hydraulic pipe is strong, fast transmission, durable.
Buy It Now
Free Shipping Condition: New Location: Switzerland The surface of the block is complete, dense and beautiful. Hollow Block Making Machine, Paving, Block Making Machine, Interlock Block Making Machine, ... moreCurbstone Block Machine. Pull back small moving brick machine to move the brick.
Buy It Now
$14.00 Shipping Condition: New Location: Detroit, United States HYDRAULIC PUMP, GM - 25745840 - POWER STEERING UNIT
Buy It Now
$70.00 Shipping Condition: Used Location: Sarasota, United States Model Number: HAAS 32-4095C.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Fits Caterpillar Models Need help with a part you found?. EXPERT SERVICE. Qualifying order only. Parts For: Ariens, Briggs & Stratton, Jacobsen, Toro, ... moreTroy Built, Sears & More! Featured Categories.
Buy It Now
$75.00 Shipping Condition: Used Location: Jordan Model: PB1200. Manufacturer: Asem. Type: Box PC. USD 280,00 Sofort Kauf. USD 52,50 Sofort Kauf. USD 65,00 Sofort Kauf. USD 140,00 Sofort Kauf. PEPPERL+FUCHS ... moreNCN15-M1K-E5 INDUCTIVE SENSOR.
Buy It Now
Condition: Used Location: Mesa, United States Its compact and sturdy design boasts 50 tons of pressure at the punch station and 25 tons of pressure at the central workstation. This allows the user ... moreto punch a 1-1/8” round hole through 3/8” mild steel.
Buy It Now
Condition: Used Location: Mukilteo, United States Haeger 824 Hardware Insertion Press. Ability to jog ram up or down. Safe, even application of pressure ensures proper seating of fastener. Stroke length ... more0-8.5” Adjustable. Strokes per minute 40 at 1” stroke.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Dual Pressure Unit with Filter and Cooler Hydraulic Reservoir. ... moreIt may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Condition: Used Location: Toledo, United States POWER. . 110V SINGLE PHASE. CENTER LOAD CAPACITY. 3000 LBS. SIDE-END LOAD CAPACITY. 3000 LBS. AXLE LOAD CAPACITY. VERTICAL TRAVEL. 35".
Buy It Now
$700.00 Shipping Condition: Used Location: Chino Hills, United States SAVAGE 100 TON TRAVELING HEAD HYDRAULIC STRAIGHTENING PRESS Serial Number 1275 Approximate Year Manufactured 1972 Specifications: Rated Capacity 100 Ton ... moreTable Size 68" LR X 24" FB Ram Speeds: Advance 133 IPM Pressing 12 IPM Retract 260 IPM Open Daylight 24" Stroke 20" Bore 10" Equipped With Westinghouse 7 1/2 HP. 230/460 Volt, 3 Phase, 60 Hertz Main Motor This machine has been in storage for the last 30 years. Ready to go back to work for you. Came right from service. Much heavier than a Dake Straightening Press. We will load for free. We are going to sell this Savage 100 Ton Traveling Head Hydraulic Straightening Press for $13.500. USD. We will send the high bidder an email with payment instructions. Payment to be in the form of a cashier's check, money order or wire transfer. International buyers will need to use a customs broker. Buyer to pay freight. Ask one of your local trucking companies for a LTL, Less than load) rate from zip 43614. Our rigging and loading for this machine is FREE. We load weekdays between 8 am and 2 pm onto an open top truck. No van loading. Should you have any questions. Please feel free to contact us at(248) 892-5233 weekdays between 7 am& 4 pm EST. Time is money. Payment to be made within 5 business days of award and shipment within 7 days. MUST SELL. WE REALLY NEED THE ROOM. Beware of fraudulent second chance offers. Please contact us direct with any concerns. We will not offer any second chance offers. If anyone contacts you. Including eBay, it is not us.
Buy It Now
Condition: Used Location: Lancaster, United States 500 TON Hydraulic PRESS. Separate Hydraulic Tank and Pump/Motor Stand. Hydraulic Tank Capacity: TBD. Overall Size Hydraulic Unit: 72" LR x 60" FB x 75" ... moreHigh x 2,700 Lbs. 20 HP Main Motor. Overall Size Press: 87" LR x 54" FB x 121" High x 31,500 Lbs.
Buy It Now
$39.85 Shipping Condition: Used Location: Bucyrus, United States This is a Aerotech PS05 Laser Power Supply Unit And Precision Laser in working condition. Everything here powers up flawlessly and appears to have been ... morewell taken care of.
Buy It Now
$167.00 Shipping Condition: New Location: China 1300W Electric Hydraulic Punching Machine Electric Punching Tool Hydraulic Piercing Press MHP-20. Power; 1300w. Model: MHP-20 Angle Steel Hydraulic punching ... moremachine. Mold standard: Φ6.5, Φ9, Φ13, Φ17, Φ20.5.
Buy It Now
Free Shipping Condition: Used Location: Chula Vista, United States
Buy It Now
$14.00 Shipping Condition: New Location: Detroit, United States HYDRAULIC UNIT, DELPHI, 15117954 - PL032113A4, POWER STEERING UNIT WITH RESERVOIR
Buy It Now
Condition: Used Location: Holland, United States Positioning Speed. 0 to 183 ft/in. No Need To Flip Beam: Can Punch Both Top & Bottom Flange. BFC-530 beam punch line. Beam Width Capacity. Paste link ... moreinto a browser window:[isdntekvideo].
Buy It Now
Condition: New Location: Grand Haven, United States MODEL: 50H. Hand Operated Hydraulic Press. Pressing speed n/a. Capacity 50 tons. Maximum ram to table 40". Air Pressure n/a. Width between table channels ... more7-1/4". Operation Hand.
Buy It Now
Condition: Used Location: Toledo, United States
Buy It Now
Condition: Used Location: Louisville, United States This lathe is loaded with options and ready to go to work. Can be seen under power. Turning Dia 16.14". Air Blow Chuck. Turret Air Blow. Y-Axis Off Center ... moreTurning Function. LNS E Connect. Live Tooling Yes.
Buy It Now
Condition: Used Location: Toledo, United States POWER. . 110V SINGLE PHASE. CENTER LOAD CAPACITY. 4000 LBS. SIDE-END LOAD CAPACITY. 4000 LBS. AXLE LOAD CAPACITY. VERTICAL TRAVEL. 23-3/4".
Buy It Now
Condition: Used Location: Toledo, United States CENTER LOAD CAPACITY. 3000 LBS. VERTICAL TRAVEL. 35". SIDE-END LOAD CAPACITY. 3000 LBS. AXLE LOAD CAPACITY. TABLE SIZE. 24" X 48". POWER. . 110V SINGLE ... morePHASE.
Buy It Now
Condition: Used Location: Cedarburg, United States Spego Inc. TURNAMIC Hydraulic Barfeed. Model #: 123Z65. Hydraulic Power Source. SPEC'S SUBJECT TO FINAL INSPECTION. WE'LL DO OUR VERY BEST TO MAKE IT ... moreSO! Pump Motor. S/N: 602514 &.
Buy It Now
$14.00 Shipping Condition: New Location: Detroit, United States HYDRAULIC PUMP, GM - 26014092 - POWER STEERING UNIT
Buy It Now
Free Shipping Condition: New Location: United States OEM Part Number: XT 5 5QM. It is dyed red for ease of leak detection. Manufacturer: Ford. ambient temperatures, excellent thermal and oxidation resistance ... moreand good low. additives, which provide excellent shifting characteristics at high and low.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Crimp range: 0.55"-2.72"(14mm-69mm). Crimp force: 5390KN(550T). - Widely used in all walks of life, can be used for hydraulic hose, steel pipe, iron pipe ... moreand other crimping processing. - The mold installation is simple and convenient.
Buy It Now
Condition: Used Location: Toledo, United States POWER. . 110V SINGLE PHASE. CENTER LOAD CAPACITY. 4000 LBS. VERTICAL TRAVEL. 23-3/4". SIDE-END LOAD CAPACITY. 4000 LBS. AXLE LOAD CAPACITY. TABLE SIZE. ... more. 36" X 36".
Buy It Now
Condition: Used Location: Muskegon, United States (It is the NACHI Hydraulic Power Unit. Weight: 125 Lbs. 1) Very Poor. This part was pulled from the inventory crib of a large corporation and is being ... moresold in good working condition unless otherwise stated!
Buy It Now
Condition: Used Location: Holland, United States 16 GAUGE @ 10'. 72" @ 10 GAUGE. DIE SPACE. . 7-1/2". DIE CLEARANCE. . We load for free. ELECTRIC FOOT PEDAL. YES. MODEL. 10. SERIAL. . 81436.
Buy It Now
Condition: Used Location: Toledo, United States CAPACITY 35 TON. POWER UNIT YES. ROUND 13/16" THRU 1/2". OPEN HEIGHT 9/16". THROAT 2-3/4".
Buy It Now
$14.00 Shipping Condition: New Location: Detroit, United States HYDRAULIC PUMP, GM - 26079870 - POWER STEERING UNIT WITH RESERVOIR - PA66
Buy It Now
$450.00 Shipping Condition: New – Open box Location: Bryant, United States There are multiple uses for the Horizontal Bending Press PP200 NARGESA. Punching, boring, drilling or punching plates to make perforations on fences, ... moredoors, windows and other parts. As you can see, the uses of Hydraulic Horizontal Bending Press Nargesa PP200 are really limitless.
Buy It Now
Condition: Used Location: Bardstown, United States Matsui JL-5VC Vacuum Jet Loader, 460VAC, 3PH, 60Hz. Horsepower: 2Hp. Max Airflow Rate: 99 CFM. Model: JL-5VC Vacuum Jet Loader. Local Machinery Moving ... moreServices. machinery VIEW ALL. Dust Box Capacity.25 Cu.Ft.
Buy It Now
Free Shipping Condition: Used Location: Chula Vista, United States
|
|
|
|
10' X 1/4" CINCINNATI-INC "2H10" HYDRAULIC POWER SQUARING SHEAR - #26762
Quote# 26762. 10' X 1/4" CINCINNATI-INC HYDRAULIC POWER SQUARING SHEAR New 1980. Serial No 2C087, Model 2H10, Series"CENTURY" EQUIPPED WITH: 36" Front Operated Power Back Gauge 10' Squaring Arm(2) Front Supports Adjustable Stroke Length Extra Knives CATALOGUE SPECIFICATIONS: Shearing Capacity. Mild Steel. 10' X 1/4" Shearing Capacity. Stainless Steel. 10' X 3/16" Shearing Capacity. Aluminum. 10' X 3/8" Cutting Length. Maximum. 120" Main Motor. Horsepower. 15 HP. Electrical System. 230-460/3/60. Weight. Approximately. 13500 LBS. PRICE: F.O.B. OUR WAREHOUSE. $24.500.00. All machine/equipment subject to prior sell.
|
|
|
Manual Custom Riken Porta Power Hydraulic Press with Jigs
Manual Custom Riken Porta Power Hydraulic Press with Jigs- Let me know if you have any questions. You will have to arrange for shipping or pick-up from Flowery Branch GA! May be able to deliver if in NC. SC or GA?
|
|
|
1/2" X 12' Cincinnati Hydraulic Power Squaring Shear
1) Pre Owned 1985 Cincinnati Model 500HS12 Hydraulic Shear GENERAL SPECIFICATIONS Capacity(Mild Steel) ½” Maximum Shearing Length 146 ½” Rake Taper at Max Rake 1/2” Per Foot Back Gage Range 48” 60 I.P.M Number of Hold Downs 15 Distance Under Hold Downs 1” Strokes Per Minute 17-50 Motor Horsepower 40 EQUIPPED WITH 10’ Left Hand Mounted Squaring Arm Light Beam Shearing Gage Electronically Adjustable Rake Angle Power Swing Up Back Gage Variable Stroke Length Automatic Lube System Electric Foot Switch Flush Floor Shear Approximate Overall Weight 28.000 Lbs Approximate Overall Dimensions 197 3/4” LR X 106 1/2” FB X 99 5/8” H Loading onto your truck included Any Questions? 414-264-5848 Alex More pictures at alecomachinery.com
|
|
|
Hydraulic Frame Rail Track Strip Sill Hole Punch Press Vickers 10 HP Power Unit
Hydraulic Frame Rail Track Strip Sill Hole Punch Press Vickers 10 HP Power Unit 3 die sets are adjustable(rack& pinion) along the length of precision machined track table. This unit was used for punching small holes in vinyl extrusion profiles at set spacing. The die set hydraulic cylinder rods anchor in the center at the bottom of each die set(see pic. The punches straddle both sides of cylinder rod so two parts or left and right can be punched at the same time. Foot switch actuated solenoid valve controls cylinders(see pic. from rear of table) Hydraulic Power Unit includes Push Button Motor Starter and Safety Disconnect Switch. Specifics- C· Table Length: 78” Table Width: 8” Table Thickness: 1½” Table Height: 37” Thru Die Set Width: 8” approx. Die Set Sizes“3” 13”W.x 4” 6” 9”D. Pump: Vickers Rotary Vane PVB10 RSY 31 CM 11· ... moreMotor: Lincoln 10 HP. 1745 RPM, 230/460 V, 26/13 A, 3 PH, TEFC, Continuous Duty· Hydraulic Unit: Ralph A. Hiller Co. w/adjustable pump pressure relief back to tank valve. Tank size 35”W.x 24”D.x 14”H. approx. 50 gallons) Net Weight: lbs. May be inspected at our facility PLEASE NOTE WELL: If you don’t have the $$$ to pay for this item within 3 DAYS of purchase– Please DON’T press the“Buy It Now” button. Free Credit and Free“Lay-a-Way” are NOT included. Press will be relisted for sale to a $ buyer if not paid for in 3 days… Free Loading For Buyer Pick Up! END LOAD on DOCK HEIGTH truck or trailer) OR Add $199 to break unit down. Drain tank and palletize on two separate pallets approx. 42”x 42” 42”x 90” for shipping by buyer’s common carrier from zip 44440. We will advise final weight of each pallet. We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. Many Th
|
|
|
POWER TEAM 25 HYDRAULIC C FRAME PRESS WITH HYDRALIC PUMP -- GREAT SHAPE
POWER TEAM 25 TON C FREAME PRESS MODEL SPM256C- CYL. MODEL 251C-PUMP MODEL PE552E. 100000 PSI-REMOTE OPERATOR SWITCH, 110 POWER, CYL IS 1' STROKE, WORKS GREAT, I WILL PALATIZE AND LOAD TRUCK, YOU TAKE CARE OF SHIPPING, QUESTIONS CALL 716-474-7447 THANKS GARY:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e9d104199-0xfe-
|
|
|
Hydraulic Power Unit with 5 HP Motor and Vickers pump
This hydraulic power unit includes motor. Pump, tank, filter and hoses, as shown in the photo. It was removed from a working piece of equipment. We have three identical units. We provide a money back guarentee if you purchase the unit and it does not work as described. Unit can be picked up in Lima, Ohio or shipped on a pallet. We will drain the oil in the tank, strap the unit to a pallet, wrap with stretch wrap and load on an outbound trailer for an additional charge of $50(non-refundable) We can not provide shipping quotes and have no way to weight the unit. Shipping zip is 45804.
|
|
|
Di-Acro Hydro-Power Hydraulic CNC Press Brake 8'-0" 75 Ton
Di-Acro Hydro-Power Hydraulic CNC Press Brake For Sale Model 75-8 Age 1975. Specifications: Model- Di-Acro Hydro-Power Hydraulic CNC Press Brake Serial No. 9-67511883237 Bed Length– 8’6” Stroke– 3” Ram Adjustment– 4” Throat Depth– 8” Tonage– 75 Ton Approx. Floor Space– 46” x 8’6” Approx. Weight– 10.000 lbs. Equipped With: Di-Acro CNC Back gage 5” High Riser 10 HP 240V/3/60 Motor Powered Ram Adjustment. Contact: Roger Rehm. 330-466-3777 This machine is offered as is. Where is. No Warranty or return privilege. This machine is offered subject to prior sale. Buyer is responsible to verify condition and specifications before purchase. Payment in full by US bank wire prior to shipment. This machine is located in Ohio and can be inspected under power.
|
|
|
Vickers 7 1/2 Hp Hydraulic Power Unit
Up for auction is a Vickers 7 1/2 Hp Hydrualic Power Unit model number JO14268. Unit is in great shape and is fully operational. This power unit is also Has a heat exchanger so oil doesnt over heat during use. Specs: Volatage is 230/ 460 60 Hz 3 Phase
|
|
|
OILGEAR PVW 15LSAYCFP 170 Hydraulic Pump Power Unit with Lincoln 15 HP Motor
Listing is for one used OILGEAR Hydraulic Power Unit 1- Lincoln AC MOTOR TEFC 15 HP 1750 RPM 3 Phase 60 Hz 230/460 V 1750 RPM 1- Oilgear Pump Model No. PVW 1LSAYC FR 10 Serial No. 87 015167 By WESTON COMPANY HYDRAULIC MACHINERY MODEL: WET 60 SERIAL: 8819 Overall Dimensions: 54" x 27" x 40" Tank Dimensions: 46 x 27 x 15 Unit Appears in Good Used Condition We have more process related equipment in our inventory so. Call us 207-463-2190 or email@ Visit to see our ever changing inventory of sawmill. Industrial and process related equipment and machinery. Contact Info The Maine Equipment Connection 1098 Crystal Road Island Falls. ME 04747 Cell: 207-694-2041. 207-694-0400. 207-694-1635 www.maineequipmentconnection.com email: equipconn@fairpoint.net SHIPPING DETAILS All items sold are shipped FOB our Island Falls location. Unless ... moreotherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's shipping needs are unique, shipping costs and methods will vary by item and customer. Shipping details will be configured at time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 04747 TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(THE EQUIPMENT CONNECTION and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of ant item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best to describe each item the best that we can. We strive to maintain a high feedback score and we are always willing to work with yo
|
|
|
Thompson Model A Hydraulic Surface Grinder 6" x 18", X, Y Power Feeds, Warranty
Thompson Model A Surface Grinder 6" x 18" Manufacturer: THOMPSON Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Specifications: Grinding Capacity: 6" X 18" Spindle Motor: HP. 1800 RPM Wheel Size: 12” x 5” x 1 1/2” Electrics: 220V/440Sharp Vertical Knee type Mill with Prototrak MX2 and Power Drawbar Table 10.25” x 51” R-8 spindle nose V 3 Ph. EQUIPPED WITH: X& Y Power feeds Front Splash Guard Needs 6” x 18” Perm. Magnetic Chuck PAYMENT: Payments can be made by Bank Wire. Check, Paypal, Money Order or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight cost. Buyer is responsible or assumes ... moreliability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible for all arrangements and costs related to shipping. Any relevant duties. Customs, brokerage fees, taxes, and charges are the buyers responsibility. These charges may be collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Available for pick-up on Monday to Friday during business hours and on Saturday if requested. Feel free to contact us if you have any questions or would like more information. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f9985fcc7-0xfe-
|
|
|
12’ x ½” Wysong Model H-5012 Hydraulic Power Squaring Shear
Item#2479- 12’ x ½” Wysong Model H-5012 Hydraulic Power Squaring Shear Equipped With 48" FRONT OPERATED 3-AXIS PROGRAMMABLE BACK GAUGE.MODEL PC-100 FUJI MODEL FUR-K7S-UX PROGRAMMABLE INVERTER MET-FAB MOTORIZED CONVEYOR STACKER SOLID STATED CONTROLS NSI POWERED 8' FRONT ROLLER LOADING TABLE 12' SUPPORT ARM 70"SUPPORT ARM VARIOUS SUPPORT ARMS EXTRA BLADES AVAILABLE WITH SHEAR(ADDITIONAL COST) Machine Specifications: MODEL H-5012 YEAR 1995 1/2" CAPACITY MILD STEEL 12' CUTTING LENGTH 13'5" OVERALL LENGTH OF BED 48" 3-AXIS PROGRAMMABLE BACK GAUGE 36" PASS HEIGHT MOTOR& CONTROLS 460/3/60 CYCLES OVERALL DIMENSIONS: 170" OVERALL LENGTH 81" TALL 84" FB 34.000 APPROX WEIGHT, NOT INCLUDING TABLES. THIS SHEAR IS A RARE FIND. COMPLETELY LOADED WITH ALL OPTIONS. THE 3 AXIS PROGRAMMABLE ... moreBACK GAUGE IS A SIMPLE YET POWERFUL CONTROL. CAPABLE OF MULTI CUTS PER JOB AS PROGRAMMED OR A SIMPLE ONE CUT OPERATION. THIS MACHINE IS A GOOD ADDITION TO ANY FAB SHOP. Shipping Point: MI Price: $62.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
|
5/8” x 12’ HTC Hydraulic Power Squaring Shear
Item#2480- 5/8” x 12’ HTC Hydraulic Power Squaring Shear Equipped With 36" FRONT OPERATED POWER BACK GAUGE(FOPBG) 12 SHEET HOLD DOWNS 91.5" SQUARING ARM LINCOLN CENTROMATIC POWER AUTOMATIC LUBE SYSTEM STI MINI SAFE SERIES MS-4300 LIGHT SAFETY CURTAINS BALL SUPPORT ON TABLE HYDRAULICS PRESS MOUNTED Machine Specifications: MODEL 625-12SR HYDRAULIC 1977 12'4' OVERALL CUT LENGTH 5/8" CAPACITY(MILD STEEL) 12 HOLD DOWNS 8 SPM COMPLETE CYCLE. 12@1/2 CYCLE MOTOR AND CONTROLS- 50 HP BALDOR(SUPER-E) SUPER EFFICIENT INDUSTRIAL MOTOR 230/460/3/60 CYCLE MOTOR.1760 RPM FOOT CONTROL. FULL ELECTRICAL OVERALL DIMENSION- 172" L-R X 106" F-B X116"OVERALL HEIGHT APPROX 45.000 LBS APPROX WEIGHT 12" PIT REQUIRED VERY GOOD CONDITION.RARE OFFERING OF A HEAVY DUTY HYDRAULIC SHEAR, PLEASE DON'T HESITATE TO CALL YOUR SALESPERSON ... moreTO SET UP A POWERED DEMONSTRATION. Shipping Point: MI Price: $42.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
|
16’ x 3/8” HTC Hydraulic Power Squaring Shear
Item#2557- 16’ x 3/8” HTC Hydraulic Power Squaring Shear Machine Specifications: SERIAL. A871452 MODEL. 375-16A YEAR NEW. 1971 LENGTH OF CUT. 16 4" CAPACITY. 3/8" FRONT OPERATED POWER BACK GAUGE. 36" SQUARING ARM. YES MOTOR. HORSEPOWER. 20 Shipping Point: Price: $42.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
|
NIAGARA 1R-4-10GA HYDRAULIC POWER SQUARING SHEAR
Runs great! Manual back gage. Machine is on and can be tested. Our shop is in Fall River. MA.
|
|
|
10 HP Brook Crompton PORTABLE Electric Hydraulic Power Pump Unit 230/460 & Tank
Brook Crompton Portable Hydraulic Power Pump Unit Perfect working. Guaranteed. Came from a Working Environment. With Oil Cooler. Tank/ Reservoir 10 Horsepower 3 phase Brook Crompton motor 230/460 Use in Medium- to- High Volume Factory/ Mechanical and Production Line Applications. Normal 0 false false false MicrosoftInternetExplorer4 You can click on To go to our eBay store and see more industrial motors. Controls, hydraulic pumps and on and on. Now and over the coming months Local pickup is free. OR Email or call for a quote on shipping. 716-563-7921. Thank you. Stephen and Mike. From BackRightCorner
|
|
|
Enerpac 50 Ton Ram Hydraulic Porta Power Jack RCS502
Enerpac 50 ton hydraulic ram. Part#rcs502, item is a bit dusty and dirty but works great!
|
|
|
REDUCED!! 400 Ton, 4-Post, Hydraulic Press. No reserve. Can demo under power.
Huge 400 Ton(yes 800.000 pounds of force! hydraulic, 4-post press. Two 24" X 24" platens included. One cored for heating or cooling fluid. 3.25" stroke. Set up for maximum daylight of 7.5" without platens. Has timer and limit switch. New cylinder seals last year. Runs on 240/120 VAC. Single phase(needs both with 4-wire plug) Has 2 pumps for fast cycle time. We purchased it used for a development project and used it less than 100 times. Excellent condition. 36" wide and 31" deep at the base. 74" tall(on 3" C"channels that can be removed) Originally designed for pressing laminated plaques. But has many uses. Can be tested under power. Costs over $30K new. Pick-up in Boonton Township. Zip code is 07005 to check the location if you're not familiar with the area. Press is very heavy(I estimate 8000 ... morepounds) In garage with 10' X 10' door for easy rigging. Bidders can inspect press prior to bidding.
|
|
|
Hydraulic Power Unit 15gpm 220volt
Used Hydraulic test bench hydura 15 GPM piston pump driven by a 7.5 hp dayton motor single phase 220volt can flo MD40/10 filter and 2 51553 hydraulic filters wirk bench with drain hose into 5 gallon bucket otc ht-50 flowmeter. All on a rolling cart repair cylinders pumps motors and test it on this bench. Questions are welcome Posted with
|
|
|
Hydraulic Press Station Barnes 7.5HP Power Unit Omron PLC Cylinder Punch Die
Here’s an Automatic Hydraulic Press Station w/Barnes 7.5 HP Power Unit& Omron Sysmac C40K PLC Controller Recently removed from service- Well equipped unit. A complete turnkey automatic hydraulic press station- simply re-tool to suit your application Unit consists of main hydraulic ram cylinder as well as front mounted pneumatic"thumb" cylinder to hold part in place in nesting tooling(see pics. Includes 7.5 HP Hydraulic Power Unit w/Barnes Pump Includes machine control panel w/Omron Sysmac C40K Programmable Control. Electrical prints, software/program disc& Allen Bradley door safety fuse disconnect Double push button safety operator control Includes angle plate"tombstones" w/multiple tapped hole locations for nesting fixture mounting PLEASE NOTE WELL: This unit is currently HALF FULL of good. Clean hydraulic oil. ... moreI can drain it prior to shipping. If you want it you're welcome to take it right along but YOU and only YOU must complete ALL safety and M.S.D.S. documents required by YOUR common carrier. Specifics- Ram Cylinder: Miller. Stroke: 2.5" Bore: 3.25" Rod Dia: 1.375" Hydraulic Power Unit: Barnes Pump. Mod: 3192; Motor: Baldor, 7.5 HP, 1725 RPM, 208-230/460 Volt, 21.5-20/10 Amp, 3 Phase. TEFC, Continuous Duty; Tank Size: 19"D.x 30"W.x 16"H. 39 gal. cap. PLC: Omron Sysmac C40K w/program disc· Power: 480V. 20A, 3PH· Table Size: 36"W.x 32"D.x 1"thk. steel plate· O/A Dimensions: 36”W. x 77”D. x 72"H. Net Weight: 2016 lbs. as pictured)including oil) Compare at $ THOUSANDS& THOUSANDS $ when new… May be momentarily tested under power at our facility or return for refund if not satisfied Free Loading For Buyer Pick Up! OR Add $149 To pack unit on a HD pallet approx. 48”x 84” at approx. 2200 lbs. for pick-up by buyer’s common carrier from zip 44440 We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3
|
|
|
Kidder Hydraulic Power Corner Notcher + Foot Switch and Emergency Stop Button
Kidder Hydraulic Power Corner Notcher + Foot Switch and Emergency Stop Button. Kidder Hydraulic Power Notcher Manufacturer: Kidder Model: 43BMPS S/N: 39251 Specifications: Capacity( Mild Steel) 11 Ga. Shearing Capacity 5" x 5" Throat Depth 7" Table Size 12" x 18" Dimensions(L x W x H) 26" x 18" x 52" Weight 400 Lbs. Equipped With: Electric Foot Pedal Work Guides Emergency Stop Button
|
|
|
Bettenbender Hydraulic Press Brake + Webb Power Roll + Bickford Radial Drill
Bettenbender 12' Hydraulic Press Brake + Webb 42" 9 gauge Power Roll + Bickford Chipmaster/Giddings& Lewis 3HP Radial Drill Bettenbender hydraulic press brake- 12' 70 ton Webb power roll- 42" 9 gauge Bickford Chipmaster/Giddings& Lewis radial drill- 3 horsepower Shipping can be provided for a nominal fee. Alternatively. Buyer arranged and paid shipping or local pickup is acceptable. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Power Team 100 Ton Electric / Hydraulic H- Frame Press
Power Team 100 Ton H-Frame press Loading is included in the price Located: Portsmouth. Virginia Info: 802-558-2773 Dimensions(in. A B C D* E F G H J L M Floor Space 77 1/4, 64, 36, 7-43, 2-42, 8, 50, 5, 10, 3 3/8, 15, 36 x 78 1/4, lateral head movement,
|
|
|
HYDRAULIC POWER SQUARING SHEAR , 10FT X 1/4" , TRUFAB WYSONG . FRONT OPERATED BG
HERE IS A NICE 10FT X 1/4" HYDRAULIC SHEAR WITH A FRONT OPERATED POWER BACK GAUGE. THIS MACHINE IS A TRUFAB IMPORTED BY WYSONG. HAS 4 MATERIAL SUPPORTS. A SQUARING ARM AND OPERATING MANUAL. BLADES ARE SHARP AND READY TO WORK. THANKS FOR LOOKING, WILL LOAD AT NO CHARGE ON AN OPEN FLATBED. WEIGHT APPROX 10,000 LBS. THANKS FOR LOOKING
|
|
|
4' x 3/8" METAL MUNCHER Hydraulic Power Shear Squaring
This Machine in plant! Email us for more pics/ info! OR. You are bidding on a 4' x 3/8" METAL MUNCHER Hydraulic Power Shear! Good condition! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
Pullmax Model US230 Hydraulic Power Squaring Shear 1978
GENERAL SPECIFICATIONS Capacity(Mild Steel) Maximum Cutting Length Rake Angle Strokes Per Minute. Full Length, Full Stroke Number of Hold Downs Back Gauge Range Distance Floor to Table Main Motor Horsepower 5/16” 120” 1.7 Degrees 28- 55 SPM 14 0.5 to 33” 34” 15 220/440 EQUIPPED WITH 126” Squaring Arm Quick Change Blade Gap Adjustment Variable Stroke Remote Electric Foot Switch Flush Floor Approximate Overall Weight 14.500 LBS Approximate Overall Dimensions 139” L X 83” FB X 89” H Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
|
|
|
Urskviken/Pullmax 2406, 1/5" x 10' Hydraulic Shear w/ Front Op Power Backgauge
Used 1978 Urskviken/Pull Max Model 2406 Hydraulic Shear: 1/5" 5mm)x 10' Hydraulic Shear Equipped with: Squaring Arm Front Sheet Supports Front Operated Power Backgauge Machine is Clean and in Good Running Condition(has a small oil leak. Easily fixed) In Plant, Under Power. Demos are Available upon Request Machine will not be Available for Pick up until 2nd week of April 2014 when the New Shear arrives at their facility. Buyer is Responsible for Freight& Rigging*Machine is Sold"As-Is, Where-Is" with No Warranty Expressed or Implied. Customer is Responsible for Machine Inspection Prior to Shipment.
|
|
|
1/4" x 12' Allsteel Model 1/4- 12 Hydraulic Power Shear, S/N Y-S-2597 (1997)
INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: REFERENCE# 6183 Allsteel Hydraulic Power Shear MODEL: 1/4- 12 S/N: Y-S-2597 Year: 1997 Specifications: Capacity(Mild Steel) 1/4" Max. Cutting Length 12' Rake Angle 5/8" Number Of Hold Downs 19 Back Gauge Range 40" Strokes Per Minute: Full Stroke 17 Short Stroke 75 Dimensions(LxWxH) 161" x 96" x 102" Weight 22.000 Lbs. Equipped With: Front Operated Power Back Gauge With Indicator Square Arm Front Material Supports Electric Foot Pedal Horsepower: 25 Location: Holland. OH BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington ... morePark Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which
|
|
|
LVD SHEAR 1/2 in x 13.5 ft Hydraulic machine Power Squaring - FREE LOADING
Please call with any Questions 610-521-5080 Make: LVD Type: MVS4050/13 No: 7822 Max Capacity: 1/2 in x 13.5ft We Will Load For Free This Machine. Is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. We can Deliver this Machine and place it on your shop floor if you are in a 4 hour range from Philadelphia for an additional Fee. We will Load this onto any truck or trailer for FREE. Cross country Transportation: You can get a great rate by calling 1-888-651-0566This is the Trucking company that we use. Please check out our ... moreother forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
10 Ga. x 9.78" Amada, Model CSW-250, Hydraulic Power Notcher, S/N 25001210 (1986
5663- Amada Hydraulic Power Notcher Manufacturer: Amada Model: CSW-250 S/N: 25001210 Year: 1986 Specifications: Capacity(Mild Steel) 10 Ga. Max. Cutting Length 9.84" x 9.84" Tonnage 11 Stroke Length 0.94" Oil Tank Capacity 14.5 Gallons Strokes Per Minute 42 Dimensions(L x W x H) 46" x 44" x 53" Weight 3.000 Lbs. Equipped With: Twin Work Guides With Digital Readouts Coper Notcher Attachment Auto Lube System Electric Foot Pedal Horsepower: 3 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS ... more1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all
|
|
|
1/4" x 10' Adira Hydraulic Power Shear Model: GHR-0630 S/N: 2490-7052 (1994)
4739- Adira Hydraulic Power Shear Manufacturer: Adira Model: GHR-0630 S/N: 2490-7052 Year: 1994 Specifications: Capacity(Mild Steel) 1/4" Max. Cutting Length 10' Rake Angle 1.3 Degrees Blade Gap Adjustment 0.002" 0.0315" Number Of Hold Downs(Hydraulic) 16 Gap 13" Back Gauge Range 39" Strokes Per Minute 15- 22 Dimensions(L x W x H) 150" x 7' x 78" Weight 13.000 Lbs. Equipped With: Front Operated Programmable Back Gauge Square Arm Front Material Supports Power Length Of Cut Control Auto Lube System Electric Foot Pedal Quick Change Rake Angle Swing Up Back Gauge Horsepower: 10 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment ... moreor questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY QUOTE DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified on the front of this invoice, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all
|
|
|
3/8" x 10' Cincinnati Hydraulic CNC Power Shear Model: 3750 x 10 S/N: 44386
800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 4446- Cincinnati Hydraulic CNC Power Shear Manufacturer: Cincinnati Model: 3750 x 10 S/N: 44386 Year: 1985 Specifications: Capacity(Mild Steel) 3/8" Max. Cutting Length 10' Rake Angle 7/16" Number Of Hydraulic Hold Downs 13 Hold Down Force 14.9 Tons Distance Under Hold Downs 5/8" Back Gauge Range 48" Stokes Per Minute: Long Stroke 18 Short Stroke 60 Dimensions(L x D x H) 160" x 96" x 87" Weight 18.500 Lbs. Equipped With: Cincinnati CNC Control. Front& Rear Gauging Swing Up Back Gauge(Hydraulic) Auto Lube System Oil Cooler Front Material Supports Electric Foot pedal Horsepower: 25 Continental Sheet Conveyor MDL: LD-10 S/N: 0566 Bed Size.10' x 6' Dimensions(L x W x H)132" x 90" x 38" Weight.4.000 ... moreLBS Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder
|
|
|
3/8" x 8' Hydraulic Power Shear, Pacific Mfg. Co. Model 375S8 w/ Power Backguage
Used Pacific Model 375S8 Hydraulic Shear: Distance between housings. 8'3" LR Holddowns. 9 Holddown total pressure(tons) 23 Rake. 1/2 IPF Four-Edge knife size(L x Face x W) 8' x 4" x 1" Throat. 18" Distance floor to pass line. 34-3/4" Back Gauge Range. 36" Weight. 26.000 lbs. O.A. Dimensions.lr x fb x high) 7'6" x 10'4" x 9' Equipped with: Back Operated Power Backgauge Squaring Arm(1) Sheet Support(See pics) Hydraulic Holddowns Foot Treadle& Foot Pedal Activation Centro-Matic Auto Lube Motor: Hydraulic- 30 HP Machine is In Good Running Condition. In Plant. Under Power. Demos Available Upon Request. Buyer is Responsible for Freight& Rigging FOB: Madera. CA 93638*Machine Sold"As-Is. Where-Is" with no Warranty Expressed or Implied. Customer is Responsible for Inspection ... morePrior to Shipment.
|
|
|
10' x 1/4" ACCURSHEAR #625010 Hydraulic Power Shear w CNC Front Gauge, New 1992
1/4" x 10' ACCURSHEAR No. 625010 Hydraulic Power Shear, 1992[1273] Call or Email WILL PUTNEY for more info: 215-332-3200 or sales@northamericanmachinery.net* Capacity(Mild Steel) 10' x 1/4" Maximum Cutting Length: 10' Rake Angle: 5/16" Number of Hold Downs: 16, Back Gauge Range: 36" Strokes Per Minute: 23 Full Strokes or 48 Short Strokes, EQUIPPED WITH: 36" Front Operated Power Back Gauge with LED Display, Automec Programmable Front Gauging System, Remote Electric Foot Switch Control, Manual Adjustment of Blade Clearance(Gap) Oil Cooler, Weight. Approx. 17,000 lbs. Dimensions. Approx. 147" x 85" x 85" H. Call or Email WILL PUTNEY for more info: 215-332-3200 or sales@northamericanmachinery.net* 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147f56a1b82-0x10b-
|
|
|
Dake 5-050 Electric Hydraulic 50 Ton Capacity H-Frame Press Elec-Draulic Power
DAKE 905050-02 50 TON ELECTRIC HYDRAULIC H-FRAME PRESS Description: Up for sale is a Dake Model 905050-02 Electric Hydraulic H-Frame Press. This press is in excellent condition with little to no signs of any use or wear. It features a 50 ton capacity. And runs on Elec-Draulic power. This machine was purchased out of an R&D shop in California that was never used for its intended purpose and eventually found its way to us. Included with the machine are two forged steel V-blocks and two forged steel table plates. For more information please call Gary at 510-453-0513. SPECIFICATIONS MANUFACTURER DAKE MODEL 5-050 SERIAL 200254 CAPACITY 50 TON POWER REQ 3 PHASE 22OV MFG PART NO 95050-02 FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. ... moreCALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert with eBay. Gary S. Aragon LLC will hold the
|
|
|
SPX Power Team 10 Ton Hydraulic H Frame Press w/ P55 Pump
SPX Power Team 10 Ton Hydraulic H Frame Press w/ P55 Pump Up for sale we have an SPX Power Team 10 Ton Hydraulic H Frame Press in working condition. Bench press has 15 3/8" x 18" work area. The 10 ton ram extends down 10-1/8" It comes with a gauge and a pump. The pump is an 10.000 psi SPX Power Team model P55. SPX Power Team part no. 222481. Great press on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer pays for shipping. Increased shipping charges to Hawaii. Alaska, Puerto Rico, and International shipments. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, or payment upon pick up. International buyers must ... morepay by PayPal only. Bank wire transfer is also accepted for National and International sales over $1000.00. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now!
|
|
|
12’ X 3/8’’ Hercules Shear Power Squaring Hydraulic mechanical
PLEASE NOTE! MACHINE MUST BE SOLD! Email for more information! CLICK HERE to Email Nu Tek Sales! This listing is for a Hercules 12' x 3/8" Shear! Email for more information or photos by clicking here: Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
10 Ga. x 06' Accurshear Model 61356 Hydraulic Power Shear, S/N 4687 (2003)
6459- Accurshear Hydraulic Power Shear Manufacturer: Accurshear Model: 61356 S/N: 4687 Year: 2003 Specifications: Capacity(Mild Steel) 10 Ga. Max. Cutting Length 6' Rake Angle 3/16" Number Of Hold Downs 10 Back Guage Range 36" Strokes Per Minute: Long Stroke 40 Short Stroke 65 Dimensions(L x W x H) 100" x 82" x 80" Weight 9.000 Lbs. Equipped With: Programmable Front Operated Power Back Gauge Square Arm Front Material Support Power Length Of Stroke Control Mitering Attachment Electric Foot Pedal Note: Purchased From Northrup Gruman Maintenance Shop Horsepower: 10 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial ... moreAssets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not in
|
|
|
1990 Accurshear 875010 Hydraulic Power Squaring Shear (#1232)
DESCRIPTION: 3⁄4” X 10’ 120” HYDRAULIC POWER PLATE SQUARING SHEARING SYSTEM WITH FRONT. OPERATED POWER BACKGAGE. EXTRA SHEAR BLADES, FOOT PEDAL, BALL TRANSFERS IN TABLE, ADJUSTABLE. STROKE AND AVAILABLE BOOKS& MANUALS. GENERAL SPECIFICATIONS. MAXIMUM SHEARING THICKNESS 3⁄4” MS49.0” X 26” X 14”TALL. MAXIMUM SHEARING LENGTH 10’ 120” STROKES PER MINUTE. MAXIMUM 40. BACKGAUGE TYPE: FRONT OP/PROGRAMMABLE. BACKGAUGE RANGE: 0-48” MAIN MOTOR: 50HP. MACHINE WEIGHT 56.000 LBS. MACHINE SIZE 136"X140"X106"H. EQUIPPED WITH. FRONT OPERATED POWER BACK GAUGE. 2] EXTRA SETS OF SHEAR BLADES, FOOT PEDAL, BALL TRANSFERS IN. TABLE. ADJUSTABLE STROKE, AVAILABLE BOOKS& MANUALS. PRICE: $49.500.00. NEED MORE INFO ABOUT THIS MACHINE? CALL Andy AT 813-444-4556. Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable ... moretaxes. De-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyers purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a guide as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items. Descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and with no warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safet
|
|
|
SunSource Fluid Power Systems Hydraulic System, Vickers PVQ32 pump, 90gal Tank
This is a refurbished SunSource Fluid Power Systems Hydraulic System. Remanufactured with new Vickers PVQ32 hydraulic pump, 90 gallon verticle tank, Vickers input and return filters, New 30Hp Weg 286TC frame 3 phase motor, New Thermal transfer Products AOC-19-2 heat exchanger. Never installed after being rebuilt, still crate, sold as pictured. Item is guaranteed not to be DOA for replacement or refund within 14 days of receiving. Item is sold as pictured. Note: the item you receive may not be the exact one pictured when multiple items are listed. Please ask any questions before your bid; be as specific as possible. Shipping We ship items once payment is received. We ship USPS Priority mail with delivery confirmation. USPS First Class mail and UPS Ground. Please note: we combine shipping. The cost of combined shipping depends on weight. Location ... moreof buyer and size of box. Large orders will require UPS shipping. If you purchase multiple auctions please wait to be invoiced before paying. International shipping: we will ship worldwide. Please remember your item must go through customs which can delay receiving your item in a timely manner. We will not mark your item as a gift or pay any customs fees. Any and all extra fees incurred for international shipping are the responsibility of the buyer. All used items are sold as is and are non-returnable. So please be sure before purchasing the item. WE WILL NOT SHIP TO UNCONFIRMED ADDRESSES. WE WILL ONLY SHIP TO THE ADDRESS SPECIFIED ON YOUR PAYPAL ACCOUNT AS THE SHIP TO ADDRESS. THE ONLY EXCEPTION IS IF THE ADDRESS CHANGE IS IN THE SAME COUNTRY AND WE ARE PROVIDED WRITTEN CONFIRMATION OF THE NEW ADDRESS THROUGH EBAY. NO VERBAL CONFIRMATION WILL BE ACCEPTED; THIS MUST BE IN WRITING. Michigan State Sales Tax All Michigan customers are subject to Michigan State Sales tax of(6.0% regardless if the item is shipped or picked up. Return Policy We offer a 14 day money back guarantee if you receive an item that does not match our auction description and you contact us within 7
|
|
|
SPX Power Team PA6M 10,000 psi Air/Hydraulic Pump with Metal Reservoir and ram
This Air Hydraulic Pump and Ram from SPX Power Team is the reinforced metal version and is very tough. Included is a 5 ton ram that has approximately 8" stroke with a spring return. The end of the ram has female threads that are stripped out. This ram works fine and is extremely powerful.
|
|
 |