|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
$10.00 Shipping Condition: New Location: Westfield, United States As titled. No breaks or repairs. You'll receive proper size bearing balls that will provide a much smoother and longer lasting ball race fit than your ... moreused set. Fits 5ft, 6ft, 7ft, 8ft & 10ft part #1584 races.
Buy It Now
$12.00 Shipping Condition: New Location: Westfield, United States As titled. Newly cast. Perfect condition. No breaks or repairs. Part#1584. Call us at 940 597-7735 with your questions about this item. Guarantee All ... moreitems are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$4.90 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Star Windmills model 12 cataloge no. 95 as shown. You are not buying our originals. 17- 8.5" X 11" pages covering the 34 pages in this brochure. Numerous detailed drawings along with the mfg's detailed narrative describing all the key components of this mill. A portion is also dedicated to information regarding F& W towers& windmill related accessories. Call us at 940 597-7735 with your questions about this item. SEE OUR EBAY STORE FOR OTHERS AS WE HAVE THE LARGEST SELECTION OF WINDMILL LITERATURE AT THE MOST REASONABLE PRICES. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with t
Buy It Now
$12.00 Shipping Condition: Used Location: Aubrey, United States As titled. Excellent condition. New babbitt. No breaks or repairs. Part #584A as used on 8ft model 24's. You are buying ONE.
Buy It Now
$14.00 Shipping Condition: Used Location: Westfield, United States As titled. No breaks or repairs. But has wear at center shaft shoulder.
Buy It Now
$11.00 Shipping Condition: Used Location: Westfield, United States As titled. Appear to be in usable condition. No breaks or repairs. Guide rood hole reflects some wear. Cross head pin holes are excellent. Parts#8737. ... moreCall us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$9.90 Shipping Condition: New Location: Westfield, United States As titled. One Bearing Cone & one Bearing Cup for F& W 8ft Star 24 mills. No moon keep notch.
Buy It Now
$4.80 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Original Star Windmill parts list. Parts diagram and factory descriptive narrative as shown. You are not buying our originals. 4- 8.5" X 11" pages from Catalogue No. 42& 35. Two detailed drawings along with the mfg's detailed narrative describing all the key components of this mill accompany a page of parts diagrams and a page of part listings for 10ft, 12ft, 14ft& 16ft versions. Call us at 940 597-7735 with your questions about this item. SEE OUR EBAY STORE FOR OTHERS AS WE HAVE THE LARGEST SELECTION OF WINDMILL LITERATURE AT THE MOST REASONABLE PRICES. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the i
Buy It Now
$9.50 Shipping Condition: New Location: Aubrey, United States As titled. Newly cast. Perfect condition. No breaks or repairs. Part#5484 as used on the 8ft model 24's and 37 Zephyr. Call us at 940 597-7735 with ... moreyour questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$8.00 Shipping Condition: Used Location: Westfield, United States
Buy It Now
$4.75 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. You are bidding on black and white photo copies of the windmill parts list& diagrams for a Star Steel. Both back-geared and direct stroke. You are not buying my originals. 4 pages. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. All of our literature items are watermarked to deter unauthorized reproduction and redistribution. While all in
Buy It Now
$14.00 Shipping Condition: Used Location: Westfield, United States As titled. No breaks or repairs. Good usable condition.
Buy It Now
$4.50 Shipping Condition: New Location: Westfield, United States You are not buying my originals. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information ... morethat may be helpful in their restoration efforts.
Buy It Now
$8.00 Shipping Condition: Used Location: Westfield, United States
Buy It Now
$11.00 Shipping Condition: New Location: Westfield, United States The 8ft Star 24 &37 brake band, new. Part number 3384.
Buy It Now
$12.00 Shipping Condition: New Location: Aubrey, United States As titled. Excellent condition. No breaks or repairs. Part #5684 as used on 8ft model 24's. You are buying ONE.
Buy It Now
Condition: New Location: Westfield, United States TERMS: We offer new hot dipped galvanized wheels for most vintage windmills. These wheels are custom made to order of USA steel. Assembled into sections, ... morethen hot dipped galvanized to insure long life. They are made to original factory specifications so fit is always perfect. Because the glavanizer requires a minimum dipping order we fabricate in groups. We are taking orders now for wheels to be ready to ship in July 2013. It is possible they will be ready sooner. This listing is for a wheel only. no spokes included as those are sold seperately. THE SHIPPING PRICE SHOWN IS ONLY FOR THOSE BUYERS WHO FAIL TO CONTACT US BEFORE THEY BUY TO GET AN ACCURATE SHIPPING QUOTE. WE CAN SHIP IT FOR LESS IF YOU'LL PROVIDE US WITH DETAILS TO GET YOU A PERSONALIZED QUOTE. SHIPPING TO A COMMERCIAL ADDRESS OR TERMINAL IS THE LEAST EXPENSIVE WAY TO GO. TAKE A MOMENT TO SEND US A NOTE AND SAVE! Wheel can be picked up or shipped. Provided you are along our route between our shop and the fabrication point we might even be able to drop one off to you. Weighs approx. 180lb when palletized. We'll ship it via freight carrier. Contact us for a quote. Possible drop off states include IL. KS, MO, NE, IA, SD, MN, OK& IN. This listing is for an 8ft Star 24 wheel. Consists of 5- 3 sail sections. Terms of purchase are as above. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leav
Buy It Now
$11.00 Shipping Condition: New Location: Westfield, United States As titled. Perfect unused condition. This a new reproduction spring created from an original sample of those used on model 24 7ft mills.
Buy It Now
$8.00 Shipping Condition: Used Location: Westfield, United States As titled. Appear to be in good usable condition. No breaks or repairs. Part#4737. Call us at 940 597-7735 with your questions about this item. Guarantee ... moreAll items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$14.00 Shipping Condition: Used Location: Westfield, United States As titled. No breaks or repairs. Usable condition. Part 63747. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed ... moreto be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$17.00 Shipping Condition: New Location: Aubrey, United States As titled. Perfect condition. No breaks or repairs. Part #2384 as used on 8ft model 24's. You are buying ONE.
Buy It Now
$17.00 Shipping Condition: New Location: Aubrey, United States As titled. Perfect condition. No breaks or repairs. Part #5584 as used on the late 8ft model 24's. You are buying ONE.
Buy It Now
$22.00 Shipping Condition: New Location: Aubrey, United States As titled. Excellent condition. No breaks or repairs. Part #3184 & 3284 as used on 8ft model 24's. You are buying ONE SET.
Buy It Now
$28.00 Shipping Condition: New Location: Westfield, United States As titled. Perfect unused condition. These are new reproduction spokes created from an original sample of those used on model 24 8ft mills. Hot dip galvanied. ... moreONE or MORE.
Buy It Now
$25.00 Shipping Condition: New Location: Westfield, United States As titled. New, unused. Fits 5ft, 7ft & 8ft F& W Star 37 & Star 24 mills. Includes tower cap, stay, race with balls. You're buying ONE new recast set. ... moreNow you can finally use that bargain 3 leg tower for almost any mill.
Buy It Now
$11.00 Shipping Condition: New Location: Westfield, United States The early 8ft Star used a different brake band than the klater version. This the early version, new. Part number 3384.
Buy It Now
$13.00 Shipping Condition: New Location: Westfield, United States As titled. Perfect unused condition. This a new reproduction spring created from an original sample of those used on model 37 8ft mills.
Buy It Now
$19.00 Shipping Condition: New Location: Westfield, United States Only fits EARLY version models. This is an 8ft brake lever, new. Part number 3484.
Buy It Now
$24.00 Shipping Condition: New Location: Westfield, United States Only fits EARLY version models. This is an 8ft Star 24 brake band & brake lever set, new. Part number 3384A & 3484.
Buy It Now
$2.00 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of Flint& Walling hand& windmil pump diagrams& parts lists. You are not buying our originals. 42-8 1/2" X 11" pages. Non consecutive. Great pictures of common and heavy hand lift pumps, adjustable base pumps, force pumps, windmill pumps, etc. Covers numerous models. From cataloge#120 of the mid 1920's. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback
Buy It Now
$4.80 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Flint& Walling Star 37 parts list. Covers 5ft to 15ft models. You are not buying our originals. 4- 8 1/2" X 11" pages. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. All
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your restoration as noted above. It includes 2- 24" X 36" sheets as shown for use on both sides of the vane. Each stencil layout ... moreis reproduced from either actual tail vanes or published manufacturer data.
Buy It Now
$4.80 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Flint& Walling Star 37 trade discription used by the factory in their sales catalogs that includes diagrams. You are not buying our originals. 4- 8 1/2" X 11" pages. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leav
Buy It Now
$4.50 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Red Cross Mfg. Co. steel wheel back geared windmill parts list& diagrams from their Cataloge No.22. You are not buying our originals. 2 total 8 1/2" X 11" pages. This mill was considered a copy of the Flint& Walling back geared steel mill. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. Feedback. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your restoration as noted above. It includes 2- 48" X 36" sheets as shown. ACTUAL VANE NOT INCLUDED. Each stencil layout is reproduced ... morefrom either actual tail vanes or published manufacturer data.
Buy It Now
$4.50 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Red Cross Mfg. Co. wood wheel direct stroke windmill parts list& diagrams from their Cataloge No.22. You are not buying our originals. 2 total 8 1/2" X 11" pages. This mill was considered a copy of the Flint& Walling Original Star. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. Feedback. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system.
Buy It Now
$4.50 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Red Cross Mfg. Co. steel wheel direct stroke windmill descriptive guide from their Cataloge No.22. You are not buying our originals. 5 total 8 1/2" X 11" pages. Includes cross section diagram as well as others. This mill was considered a copy of the Flint& Walling Steel mill. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. Feedback. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know v
Buy It Now
$4.50 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of the Red Cross Mfg. Co. steel wheel direct stroke windmill parts list& diagrams from their Cataloge No.22. You are not buying our originals. 2 total 8 1/2" X 11" pages. This mill was considered a copy of the Flint& Walling Steel mill. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. Feedback. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. W
Buy It Now
$2.00 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. You are bidding on black and white photo copies of 1904 Flint& Walling Steel Star Tower Directions for Assembling& Erecting. You are not buying my original. Detailed instructions for raising a tower as they did back then. 2-8 1/2" X 11" pages. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your restoration as noted above. It includes 1- 48" X 36" sheet as shown for use on one side of the vane. Each stencil layout is ... morereproduced from either actual tail vanes or published manufacturer data.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your restoration as noted above. It includes 2- 24" X 36" sheets as shown for use on both sides of the vane. Each stencil layout ... moreis reproduced from either actual tail vanes or published manufacturer data.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your restoration as noted above. It includes 1- 48" X 36" sheet as shown for use on both sides of the vane. Each stencil layout is ... morereproduced from either actual tail vanes or published manufacturer data.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your restoration as noted above. It includes 2- 24" X 36" sheets as shown for use on both sides of the vane. Each stencil layout ... moreis reproduced from either actual tail vanes or published manufacturer data.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$11.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
|
|
7ft & 8ft Flint & Walling Star 37 Zephyr Windmill Pull-Out Tube, Mast Cap, etc
Pull-out tube with swivel and mast cap for 7ft& 8ft Star 37 mills. Solid and usablw but could use a good wire bruch cleaning. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback ... morewhen the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. All of our literature items are watermarked to deter unauthorized reproduction and redistribution. While all information contained in those items remains legible. Those random Windmill-Parts.com logo watermarks likely make the item not suitable for framing.
|
|
8ft Flint & Walling Star 37 Zephyr Windmill Vane Stem
8ft Star 37 Stem. VANE NOT INCLUDED. Straight and funtional. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the ... morebuyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. All of our literature items are watermarked to deter unauthorized reproduction and redistribution. While all information contained in those items remains legible. Those random Windmill-Parts.com logo watermarks likely make the item not suitable for framing.
|
|
10ft Flint & Walling Star 24 Windmill Wheel Spoke, ONE OR MORE
As titled. No breaks or repairs. Good usable condition. Nice galvanize. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We ... moremean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1437e75b7ed-0xd3-
|
|
Flint & Walling Windmill Lot of 6 w/ towers, 5ft Star 37, model 7, 12 ,15, etc
We are moving our collection to a new location and have decided to offer portions of it for sale. This lot includes 6 Flint& Walling Mfg. Co. Windmills currently on display at our park. The mills have been restored. Tower heights vary as noted below. We have many other pictures of these mills to provide since we are limited to posting a max of 12 pic's in this listing. These mills are not available for shipping given the towers are assembled. Our Buy Now price includes us taking the mill& tower down in preparation for being picked up. We will help load everything on your trailer. Pick up would take place at our park near Cloverdale. IN. Some of these mills are displayed inside our 2 indoor facilities. Included are; 10ft Original Star on 9ft 4 post prairie display tower. 10ft Star 7 on a 11ft 4 post tower, 8ft Star 12 w/ 20ft 4 ... morepost tower, 5ft Star 37 with 10ft 4 post tower, rare 10ft Star 15 on 10ft 3 post display tower and complete iron for a 10ft Leader on 4ft Wood stub tower which is a part of our Eclipse copy cat mill display. Please contact us through the ebay message system for additional pictures or other questions you might have. Call us at 940 597-7735 if you have questions about these items. This auction does not include any pictured background items not described as included with this auction. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14ba3c6236c-0x116-
|
|
Flint & Walling Star 24 or 37 Windmill Sheave for 5ft 7ft 8ft & 10ft mills
As titled. Appears to be in good usable condition with slight wear. No breaks or repairs. Parts#2382. Fits 5ft. 7ft, 8ft& 10ft mills. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We ... moreleave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
|
|
8ft Flint & Walling Star 37 Windmill Guide Rod Brace Casting , #7837
As titled. No breaks or repairs. Usable condition. Part 7837. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that ... morethe buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
|
|
7ft Flint & Walling Star 37 Windmill Large Gears, PAIR, #9737 plus #5737
As titled. Appear to be in good usable condition. Crusty but will clean up nicely. No breaks or repairs. Good teeth with minimal wear. Includes crank shaft case& usable bearings. Spins free and smoothly but dry. Parts#9737& 5737. You are buying a matched pair. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with ... morethe item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
|
|
7ft Flint & Walling Star 37 Windmill Crosshead, #8737
As titled. Appear to be in usable condition. No breaks or repairs. Guide rood hole reflects some wear. Cross head pin holes are excellent. Parts#8737. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. ... moreFeedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
|
|
|