|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 03241170008. Manufacturer: CARLSON. See details below. Larger pallet sizes cost more. (c) Truckload and Partial Truckload: HGR can assist ... moreyou in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: ALLEN. See details below. Larger pallet sizes cost more. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads ... moreor partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: New Location: Muskegon, United States NEW Ellis Model 1800 mitre cutting bandsaw. Made in the U.S.A. With one year manufacturer's warranty. 1800 Mitre Band Saw. Head of band saw moves left ... moreor right for angle cutting. Removable Chip Tray Standard.
Buy It Now
Condition: Used Location: Cedarburg, United States Universal Automatic Machine CNC Double End Drilling / Milling Machine. Dual Opposed Heads. 8" of Travel Per Drilling Head. WE'LL DO OUR VERY BEST TO MAKE ... moreIT SO! Model #: 5.5. 2 Hp, 208-230/460v, 3ph, 60 Hz.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 03241170009. Manufacturer: CARLSON. See details below. Larger pallet sizes cost more. (c) Truckload and Partial Truckload: HGR can assist ... moreyou in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Toledo, United States TABLE LENGTH.: 320" CONSISTS OF TWO 72" X 160" TABLES. TABLE WIDTH..: 72". RPM LOW..: 27 - 309. NUMBER OF HEADS..
Buy It Now
Free Shipping Condition: Used Location: Boise, United States X and Y axis travel is via round linear bearings. Machined pulley for cable drive slides on keyed shaft to move with carriage. All parts shown are included, ... moreexcept for last 2 pictures. Note the head on this unit adjust for 2 heads and is a very nicely built assembly with lead screws, magnetic clutches and dovetail slides.
Buy It Now
Condition: Used Location: Lincolnshire, United States Plumbed for Speedfam Slurry Tank and Pump Distributor with Manual and. Drive System: The machining plates and work carrier drives are variable speed. ... moreWork Carrier Motor. - Speed - Lower Plate.
Buy It Now
Condition: Used Location: Long Beach, United States Orange, Calif 92865.
Buy It Now
Condition: Used Location: Toledo, United States CAPACITY. 24 GAUGE. MOTOR. 1 HP.
Buy It Now
Condition: Used Location: Cincinnati, United States 6.25" x 51" HEY "3" AUTOMATIC DOUBLE-END FACING. Facing Capability. NOTE: In Addition To Facing & Centering Other Operations. & CENTERING MACHINE. (2) ... moreSelf Centering Air Clamping Vises. Centering Heads: (2) 7.5 HP (each).
Buy It Now
Condition: Used Location: Lincolnshire, United States Tank Heater.1500 watt. Reservoir Tank.3 Cylinder Axial Diaphragm w/Brass Pump Head. 304 Stainless Steel Construction (Spray Chamber & Reservoir Tank). ... moreFlexible Neoprene. Preliminary Specifications Subject to Verification.
Buy It Now
Free Shipping Condition: New Location: Azusa, United States The NEJE A40640 module adjusts the focus to Long focal end by default. This is because the NEJE factory has to ensure the consistency of product testing. ... moreNEJE A40640 12W pulse Dual Beam Zoom laser head module for laser engraver cutter.
Buy It Now
Condition: Used Location: Houston, United States Speedycut Tapping Machine. Model ST-KU-203 Tapper. We have a forklift and a loading dock. With stand and foot switch.
Buy It Now
Free Shipping Condition: New Location: Canada WHAT YOU HAVE HERE IS A Z AXIS LIFTER FOR PLASMA WITH FLOATING AND MAGNETIC BREAKAWAY. ALL PARTS ARE PRECISION CNC MACHINED TO TIGHT TOLERANCES. -MAGNETIC ... moreBREAKAWAY. -Magnetic breakaway will detect the plasma torch.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Condition: Used Location: Lincolnshire, United States Tank Heater.1500 watt. Reservoir Tank.3 Cylinder Axial Diaphragm w/Brass Pump Head. 304 Stainless Steel Construction (Spray Chamber & Reservoir Tank). ... moreFlexible Neoprene. Preliminary Specifications Subject to Verification.
Buy It Now
Condition: Used Location: Lincolnshire, United States Tank Heater.1500 watt. Spencer Vortex Model VB037B-000 Blower. Reservoir Tank. Filter Tray w/100 Micron Felt Filter.3 Cylinder Axial Diaphragm w/Brass ... morePump Head. - Output Pressure - Maximum.
Buy It Now
Condition: Used Location: Toledo, United States HEAD RADIUS, MINIMUM/MAXIMUM. 16.5" TO 43". ARM LENGTH. . 4'. VERTICAL TRAVEL OF ARM. 27.25". AREA OF EACH BASE. 30" X 48". DUAL BASE. .
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Fitting Gage Head cables. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. It may not have the original color ... morecover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
Condition: Used Location: Toledo, United States TABLE LENGTH..: 204". HEIGHT UNDER RAIL.: 72". TABLE WIDTH.: 92". CROSS TRAVEL..: 120" VARIABLE SPEED. 38' L X 23' W X 16' T.
Buy It Now
Condition: Used Location: Imlay City, United States MACHINE SERIAL NUMBER 9403VD-640. Speed of the work-piece driving plate: stepless from 0.4 rpm up to 4 rpm. Machine's weight about 4000 kg. FOB TRUCK, ... moreIMLAY CITY, MI 48444. work-piece height 10 (30) mm.
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL FEEDS. . (24) 3/16 TO 30 IPM. VERTICAL KNEE TRAVEL. VERTICAL HEAD TRAVEL. MOTOR, HORSEPOWER. . 5. TAPER IN SPINDLE. 50 NS. DEPTH OF THROAT. .
Buy It Now
Condition: Used Location: Temecula, United States Jorestech Continuous band Sealer. No need to worry about the dependability of this machine, it’s stainless-steel construction of this continuous band ... moresealer makes it a durable machine. Unit has been tested to specifications.
Buy It Now
Condition: Used Location: Los Angeles, United States Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to ... moreyour computer's browser. Abrasive Hopper Capacity500 Lbs.
Buy It Now
Free Shipping Condition: New Location: Canada CNCZ AXIS LIFTER FOR PLASMA WITH MAGNETIC BREAKAWAY and FLOATING HEAD. Lifter is 6" Travel. - Magnetic breakaway will detect the plasma torch. -Z axis ... morelifter for plasma with double mount floating head and magnetic breakaway THC with 2 torch mounts, 35 mm.
Buy It Now
Condition: Used Location: Temecula, United States Jorestech Continuous band Sealer. No need to worry about the dependability of this machine, it’s stainless-steel construction of this continuous band ... moresealer makes it a durable machine. CONVERTIBLE: Adjustable from a horizontal to vertical bag sealer.
Buy It Now
Condition: Used Location: Toledo, United States MODEL. 205 12 PLAIN CINEL 60. HORIZONTAL TAPER. TOOLMAKERS OVER ARM. VERTICAL HEAD DUAL SWIVEL. VERTICAL TAPER. #50NS. SPINDLE SPEEDS. 33 TO 2,000 LBS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
$40.00 Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1x Sinal Cable for a Axis. 12x Aluminium Fastener. The Spindle Motor Must Connect with the Vfd. Volts，Current，Power： Ac110v-220v/50hz，5a,1.5kw Vfd. 2x ... moreCutter 2 6mm. 2x Cutter 3 6mm. the Machine Can Connect with Computer As Other.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. OVERALL AREA OF CHUCKS. 30" X 72". WHEEL SIZE. . 18" X 6". DUAL ELECTROMAGNETIC CHUCKS. 30" X 36". WHEEL HEAD MOTOR. . 30 HORSEPOWER.
Buy It Now
Condition: Used Location: Guilford, United States Make: Tsugami Model: M08SY-II Condition: Used, Overall in Great Shape, ready for use Very Nice Machine, Dont Sleep on this deal! -Six Programmable Axes ... more(X1, Y1, Z1, A1, Cmain and Cback) -Integral spindle motors on main and subspindles for minimal vibration and fast cutting.
Buy It Now
Condition: Used Location: Temecula, United States Jorestech Continuous band Sealer. No need to worry about the dependability of this machine, it’s stainless-steel construction of this continuous band ... moresealer makes it a durable machine. Unit has been tested to specifications.
Buy It Now
$27.45 Shipping Condition: Used Location: Caledonia, United States 1-E PROCUNIER 11003, No. 3 TAPPING HEAD, 0-1/4" CAP. TAPPING HEAD IS IN VERY GOOD, SEE PIX. COLLETS SHOW VERY LITTLE USE. (3) TAP COLLETS: #6, #8, #10. ... moreHardened, helical gears w/ 2:1 reverse avoids tap jamming and increased production.
Buy It Now
Condition: Used Location: Toledo, United States TABLE TRAVERSING MOTOR. 10 HP. HEAD VERTICAL RAPID TRAVERSE. 80 IPM. HEAD VERTICAL FEEDS. (16) 5/8 TO 20 IPM. SPINDLE FACE TO TABLE CENTER. 9.5" TO 13.5".
Buy It Now
$41.10 Shipping Condition: New – Open box Location: Lewisville, United States 2008 DMG CTX 310 ECOLINE INSTALLED ON 2010 APROX. 4500 POWER ON HOURS MACHINE LOOKS LIKE IT DID THE DAY IT WAS INSTALLED LIVE TOOL 3 HOLDERS.VDI TURRET, ... more8 INCH CHUCK, 2 INCH SPINDLE HOLE,22 HORSE PWER, 5,000 RPM, TAIL STOCK, CHIP CONVEYOR, TOOL EYE, PARTS CATCHER. SIEMANS 810D CONTROL. CAN BE INSPECTED UNDER POWER FOR MORE INFO CALL 727-858-1860. BUYER PAYS LOADING COST.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Condition: Used Location: Louisville, United States T2500 chip collector. CB6001 automatic incline loading table. Square Hollow 90°: 4 3/4”. Blade Size: Max. Second pneumatic vise. OPTIONAL FEATURES.
Buy It Now
Condition: Used Location: Houston, United States S/n 14505 ARC ER Current Monitoring Disintegrator Head Arc•er Portable Head Designed to remove broken tooling from. 079” to 3/4” (2 mm to 19.05 mm). Head ... moreis 12.5” (317.5 mm) long. Operates at any angle.
Buy It Now
Condition: Seller refurbished Location: Van Buren, United States Copies of work done on mill available. Variable Speed Head: 60 – 500,, 500-4200 RPM.
Buy It Now
Condition: Used Location: Hialeah, United States Saw blade mitre 0 to 45 degrees (left or right). Cut capacity--square 5-1/4" x 5-1/4". EQUIPPED WITH Weight, approx 430 lbs.
Buy It Now
Free Shipping Condition: Used Location: Minneapolis, United States Dual Heads – 1 is a 5-Axis and one is a 3-Axis head.
Buy It Now
$285.00 Shipping Condition: New – Open box Location: Maryland Heights, United States Toman Tas-2030 Adjustable Heat Staking Press. Stroke length: 4" (10.16 cm). Adjustable head height. Blanchard ground cast aluminum machine base with 3/8-16 ... morefixture mounting holes.
Buy It Now
Condition: Used Location: Temecula, United States Jorestech Continuous band Sealer. No need to worry about the dependability of this machine, it’s stainless-steel construction of this continuous band ... moresealer makes it a durable machine. Unit has been tested to specifications Unit was able to perform all three aspects of powering on, heating as well as fan operation.
Buy It Now
$15.00 Shipping Condition: New Location: Fullerton, United States Dustproof Halogen Work Light/Lamp 50W. 50W, 24V halogen lamp (12V option). Ergonomically designed handle attached to the head allows for easy positioning. ... moreProvides high intensity light, with a estimated lamp life of over 3,500 hours.
Buy It Now
Condition: Used Location: Cincinnati, United States MILLING DRILLING & CENTERING MACHINE. Milling Heads: (2) 20 HP (each). (2) Milling Spindle Motors, HP/RPM 20 HP/ RPM. Work Length Capacity, Maximum 144". ... moreDrilling Heads: (2) 7.5 HP (each). Hydraulic Self Centering Clamping Vises.
Buy It Now
Condition: Used Location: Lancaster, United States Hydraulic System: 53" x 47" x 74" Hugh x ?. Coolant Tank: 40" x 23" x 17" High.
Buy It Now
$27.99 Shipping Condition: New Location: Fullerton, United States LA-81C Dustproof Halogen Work Light/Lamp 9W Input:100V~240V Output:20~24V. Ergonomically designed handle attached to the head allows for easy positioning. ... moreProvides high intensity light, with a estimated lamp life of over 3,500 hours.
Buy It Now
Condition: Used Location: Temecula, United States These small yet powerful units will seal bags made with thermoplastic materials including Polyethylene (PE), Polypropylene (PP) and heat-sealable laminations. ... moreThis sealer was tested to specifications.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Milwaukee 6-in-1 Combination Pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. The Milwaukee 48-22-3079 ... moreis perfect for the toughest of jobsites.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States · KEYENCE GT2-H12. · Position Sensor Head. Position Sensor Head. Vibration resistance. · New In Box. New In Box. 10 to 55 Hz, Double amplitude 1.5 mm, ... more2 hours in each of the X, Y, and Z directions. -10 to +55 °C (No freezing).
Buy It Now
$32.59 Shipping Condition: Used Location: Guilford, United States Model: BIMBA FO2-701-M. Global Machine Brokers, LLC. Spec Sheet.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Code Word “TACHE". Gleason Parts No 27 Hypoid Grinder Manual. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. ... morePictures of the Machine Says A Thousand Words.
Buy It Now
Condition: Used Location: Cincinnati, United States Provide New Sealtight And Wiring; Draw New Prints. Test, And Build New Nylon Wear Strip Slide Rails. CATALOGUE SPECIFICATIONS Bottom Fold Section, Left ... moreSide.. 4" x 32". Bottom Fold Section, Right Side. 4" x 32".
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 01240740005. See details below. Larger pallet sizes cost more. Model Number: CLASSIC MAGIC 450TU/4. (c) Truckload and Partial Truckload: ... moreHGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Pack List: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm ... more2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual.
|
|
|
|
Chicago Rivet 214 9/64" 14"Throat Dual Double Head Riveter Riveting Machine NICE
Here’s a nice Chicago Rivet. Model 214-1793, Dual/ Double Head Riveting Machine with 14” Throat and tooled for 9/64” rivets. Unit feeds and cycles smoothly Double Push-Button Safety Operator Controls R.H. rivet gate actuator rod is missing. Machine is tooled with ONE anvil with TWO spring loaded set pins and heads are set very close together(see pics. Single Phase Specifics- Chicago Rivet; Bellwood& Naperville. IL· Mod No: 214-1793 Dual/ Double Head· Throat: 14” Size: 9/69” RPM: 175max. 150min. Jaws: 1334. Anvil: 104, Driver: 976· Motor: 1/3HP. 1140RPM, Baldor, Capacitor Start, TEFC, Cont. Duty· Volts: 115/208-230. Amps: 7/ 3.7-3.5, Phase: 1· Net Weight: 800 lbs. May be inspected under power at our facility Free Loading For Buyer Pick Up! OR Add $29 to palletize Rivet Machine on approx. 42”x 42” pallet at approx. ... more850 lbs. for shipping by buyer’s common carrier from zip 44440 We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. Many Thanks, Tom/ Lloyd If you have any questions or want more pictures or information please call us at(330) 652-7535
|
|
|
Flagler Dual Head Rollformer Model DH-2510
Info from Flagler on this machine: Flagler Dual Head Machines. Panel Type Roll Former for Forming 2 edges at the same time. Specifications: Model DH-2510. Capacity: depends upon form, Forming stations: 10 pair-opposed, Spindle size: 875 dia x 1 3/4" long, speed 80 F.P.M, Drive: Double Matched Vee Belts and Roller Chain, Stand: Arc Welded Steel, Dimensions 7.5' wide, 4.5' long, 4.5' high, Feed table height 28.25" Weight: approx. 3400 lbs The pic of the motor info is hard to read. But it is a Baldor, 3phase, 3hp, 1725 rpm WE MAY DELIVER TO YOU. DEPENDING UPON LOCATION. This machine was originally purchased from Flagler in the 80's by R&L Extrusions. Gardena, CA. Their tag is attached to the machine with their own Serial No. to identify it, but I cannot locate the original Flagler serial number on the machine. I ... moredid contact Flagler directly with photos of the machine and they did identify the machine as a Flagler machine. This same machine is still manufactured/sold by Flagler, so parts are available. We have not operated the machine since 2006 and it is sold as/is.
|
|
|
Machinists 10/4 Buy Now (3) Gesswein Dual Head Abrasives Holder
See Pics 1/4 Square By 1/16 Flat ````````````````````````````````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're ... morenot stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cra
|
|
|
MESSER MPC 2022 DUAL HEAD PRECISION PLASMA CUTTING SYSTEM
General Specifications Maximum Cutting Width 22' Maximum Cutting Length 20' Equipped With MG Hypertherm Navigator II CNC Color Controls RS 232 Communications Port Standard Shape Library Fully Funtional Multi Tasking(2) Hypertherm HD 4070 Hydefinition Plasma Power Source 200 Amp Station Outlet Equipment Torch Interface Messer PL1 Automatic Torch Height Control Plasma Noise Attenuation Torch Guard Collision Detection Left Hand Overhead Power Track With Gleason Reels 115 Lb Per Yard Heavy Duty Crane Rail Linear Motion Y Axis Ways Manuals Table In Picture Not Included Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
|
|
|
Michael Deckel 5 Axis CNC Dual Head Tool Grinder
Michael Deckel Super Precision 5 Axis Tool Dual Head Grinder We bought this machine from a plant that shut down. It's Michael Deckel's highest precision machine with the most power. The factory invoice for the machine when new was over $609.000. Appears to have very little use. Model S22P-Turbo, Year 2004, Wheel changer 8 Optional high pressure coolant system Integrated Probe System Optional High Frequency Grinder Head Max work piece diameter approx 250mm(9.84" Max work piece length approx 900mm(35.43" Max work piece length for face grinding 400mm(15.74" Max too weight 50kg(100kg max up to 30 sec) X axis grinding stroke 400mm(15.74" Feed rate 20 m/min(787 in/min) Drive Digital Controlller& AC motor, Measuring system: direct/glass scale, Direct measuring system resolution: Y axis grinding stroke: 310mm(12.205" ... moreFeed rate: 20 m/min(787 in/min) Drive: Digital Controlller& AC motor, Measuring system: direct/glass scale, Direct measuring system resolution: Z axis grinding stroke: 305mm(12.008" Feed rate: 20 m/min(787 in/min) Drive: Digital Controlller& AC motor, Measuring system: direct/glass scale, Direct measuring system resolution: A axis 360 degrees. Feed rate rapids: 850 RPM, Drive: digital controller with torque motor, Torque 40Nm(29.50 ft/lb) Measuring system: encoderResolution: C axis 224 degrees. Feed rate: rapids 40 RPM, Drive: digital controller with torque motor, Torque: 190Nm(140.14 ft/lb) Measuring system: HR, EncoderResolution: Grinding Spindle: 15kW at 100% Peak 27kW(this is the high power Michael Deckel model) Speed: Infinitely variable from 1.000 to 12,000 RPM(12,000RPM is a factory upgrade) Weight approx: 4.000kg(approx. 8,800lbs) Size 1.800x1,800x2,150 mm(71"x71"x85" Includes extra spindle controller. 2) extra servo amplifiers, 47) grinding wheel holders, extra way bellows, extra servo motor and misc parts. If you are looking for a Rollomatic. Walter Helitronic, Anca, Struder, Scheeberger, Schutte, Kanzaki or similar CNC tool grinder.t
|
|
|
Hammond Dual Head Buffing Jack (V2047)
Inventory# V2047 Style: Single Motor/Dual Head Manufacturer: Hammond Volts: 440 Phase: 3 With belt guards. Back stands, and hand brake. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1459c62e497-0x10e-
|
|
|
Hammond Dual Head Buffing Jack (V2046)
Inventory# V2046 Style: Single Motor/Dual Head Manufacturer: Hammond HP: 7.5 Volts: 208-220/440 RPM: 1740 Phase: 3 With belt guard. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hammond 3-RR Dual Head Buffing Jack (V2045)
Inventory# V2045 Style: Dual Motor/Dual Head Manufacturer: Hammond Model# 3-RR HP: 5 Volts: 440 RPM: 2000 Phase: 3 With belt guards. Back stands, and hand brakes. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hammond 5-RR Dual Head Buffing Jack (V2044)
Inventory# V2044 Style: Dual Motor/Dual Head Manufacturer: Hammond Model# 5-RR HP: 5 Volts: 440 RPM: 2000@ Spindle Phase: 3 With belt guards. Back stand, and hand brakes. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hammond Dual Head Buffing Jack (V2043)
Inventory# V2043 Style: Dual Motor/Dual Head Manufacturer: Hammond HP: 5 Volts: 208-220/440 Phase: 3 With belt guards. Hand brakes, and back stands. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hammond Rite Speed Dual Head Buffing Jack (V2042)
Inventory# V2042 Style: Single Motor Manufacturer: Hammond Model# Rite Speed HP: 5 Volts: 240/480 RPM: 2400 Phase: 3 With guards. Two pieces: 1124 lbs. and 346 lbs. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
United States Electric Tools Dual Head Buffing Jack (V2041)
Inventory# V2041 Style: Single Motor Manufacturer: United States Electric Tools Volts: 440 RPM: 2500 Phase: 3 With Beltmaster guard. Two pieces: 1480 lbs. and 336 lbs. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hanso-VanWinke Dual Head Buffiing Jack (V2040)
Inventory# V2040 Style: Single Motor/H-VH-M Manufacturer: Hanso-VanWinke Serial# VH14341 HP: 10 Volts: 230/460 RPM: 1745 Phase: 3 With brake and Beltmaster guards. Two pieces: 1336 and 334 lbs. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Dual Head Buffing Jack (V2039)
Inventory# V2039 Style: Single Motor HP: 5 Volts: 220/440 RPM: 1740 Phase: 3 Call for shipping information. Wired 440 volt. Dual head. With guards. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hammond Dual Head Buffing Jack (V2050)
Inventory# V2050 Style: Single Motor/Dual Head Manufacturer: Hammond HP: 7.5 Volts: 220/440 RPM: 3000 Phase: 3 With guards. Back stands, and hand brake. 1500-300 RPM, variable speed. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Hammond 5-RR Dual Head Buffing Jack (V2049)
Inventory# V2049 Style: Dual Motor/Dual Head Manufacturer: Hammond Model# 5-RR HP: 5 Volts: 440 Phase: 3 With guards. Back stands, and dual hand brakes. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
Arthur H. Losey Comp. Dual Head Buffing Jack (V2048)
Inventory# V2048 Style: Single Motor/Dual Head Manufacturer: Arthur H. Losey Co. HP: 5 Volts: 208-220/440 RPM: 1170 Phase: 3 With guards and back stands. Weight is estimated. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
DUAL HEAD TAPPING PRESS 20''
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05142080029 Manufacturer: Description: DUAL HEAD TAPPING PRESS 20' Capacity: 20' Model Number: Serial Number: Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE YOUR EMAIL ADDRESS WHEN REQUESTING PICTU
|
|
|
1999 Bystronic 3015-2 Dual-Head Water Jet
1) Waterjet Cutting Machine BYJET 3015-2(1) Work Area: 5" x 10' 60" x 120" 1) 1 Dual Intensifier BJD 4000 with Prefilter and Chiller(1) Cabinet Combination- 3 sections- Machine Control/CNC with WOP/Main Power(1) Inlet Water Pressure Intensifier(1) Second Cutting Head(1) Drill Unit. Safety Wall and Fence" STJ/SPS Control" HPP Control" CNC Control with Air Cond. Chiller HCV6000" Intensifier BJD 4000 with pressure stand" Cutting bridge. Tool and Drilling Unit" Sand bunker and Filter station" Basic Machine with sludge conveyor
|
|
|
Bits From Bytes BFB 3D Touch - Dual Head 3D Printer
Reference No. 62807 Please use this number in any correspondence. Bits From Bytes BFB 3D Touch Dual Head 3D Printer Links- Quantity, This auction is for one 3D printer. Description, This is a standalone printer. It only connects to the computer to download new firmware. Usually, you put your 3D file on a USB flash drive formated as FAT32 with no directories on it and select your file from the touch panel. We were able to print a test file that we downloaded from cubify.com. The printer comes with 2 used rolls. One of PLA and the other of ABS plastic. We have no specifications or other data. See pictures for additional information. Tests, Is has been tested and appears to be working. Both extruders work. One has a bit of material stuck on the wrong way. But we're not experts on this machine, so we don't want to touch it. Condition, ... moreIt is in good physical condition with some scratches from normal use. One of the feeding tubes is blocked by material as noted above. Also. One piece of plexiglas that hold a bundle of wire is broken(that does not affect the printer in any way) Shipping, This item weighs 72 lb and is too large and fragile for UPS. So the buyer must pick it up or pay for shipment by truck. If it is shipped, the buyer must pay the actual shipping price plus a packing/palletization charge of $ 35.00 It will weigh an estimated 100 lbs after packaging. The packaged dimensions will be 40 long by 40 wide by 45 high This item is located in San Diego. CA. 92101. We have a forklift on site. All items shipped via freight are covered with plastic wrap. Easily damaged parts are protected, then it is securely strapped to a custom pallet. Please use this information to get freight estimates before agreeing to purchase. If you are unable to make your own freight arrangements. We will be happy to give you a quote from our shipper, but you will likely find a better rate if you shop around. Returns, It is being sold with a 14 day return option. It can be returned for a refund less shipping if we are notified wit
|
|
 |