Buy It Now
Condition: Used Location: Lithia, United States X-Y Axis Linear Position Accuracy: +/- 0.0008". X-Y Axis Position Repeatability: +/- 0.0004". Maximum X-Y Axis Travel Speed: 32Ft/Min. Located in the ... moreTampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer.
Condition: For parts or not working Location: Flanders, United States Traditional vinyl cutting for lettering jobs. Contour cutting of pre-printed stickers. Cut through feature for the creation of individual stickers. Paired ... morewith a Mutoh ValueJet or VE PrismJET printer, you can save hours printing and cutting with our combo over doing it on one of those all-in-one machines.
Buy It Now
Condition: Used Location: Lithia, United States X-Y Axis Linear Position Accuracy: +/- 0.0008". X-Y Axis Position Repeatability: +/- 0.0004". Maximum X-Y Axis Travel Speed: 32Ft/Min. Located in the ... moreTampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer.
Buy It Now
Condition: Used Location: Lithia, United States X-Y Axis Motion System: Ball Screw, Linear Motion Guide. X-Y Axis Motion Drive: AC Servo Motor. Z Axis Motion: AC Motor with Speed Reducer. X-Y Axis Linear ... morePosition Accuracy: +/- 0.0016". X-Y Axis Repeatability: +/- 0.0004".
Buy It Now
Condition: Used Location: Elkhart, United States One(1) Used Continental Model 2A Semi Automatic Wheel. The Model 2A is an air-operated machine for cutting pipe and tube from 3/16" to 2.0 O.D. Electric ... moreDisconnect Mounted on Machine. Type Tube Cut Off Machine.
Buy It Now
Condition: Used Location: Lithia, United States Z - Axis: 6". Located in the Tampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer. Southern Fabricating ... moreMachinery Sales, Inc. Cutting Table Working Area: 157" X 78".
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications Gantry Width: 16'. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. All machine ... moresales are subject to machine availabilty. Rail System Length: 45'.
Buy It Now
Condition: Used Location: Alto, United States Asset # 14745. Power 120 Tons. Flats 24” x 5/8”, 16” x ¾”. Strokes ¾” Travel Full Cycle 28 HP. Length of Blades 24”. Depth of Throat 24”. We are always ... morelooking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Ferris, United States 4' x 0.164" (8 Gauge) Birmingham Hydraulic Plate Roll. SEARCH BIRMINGHAM ROLL. All three rolls driven by hydraulic system. Top roll has 1" ring. The top ... moreroll can be swiveled out for easy removal of the finished workpiece.
Buy It Now
Condition: Used Location: Brookfield, United States KERN DHS Laser System. - Dual Head for optimized production. - 48"x 96" cutting area. - Made in USA.
Buy It Now
Condition: Used Location: Mansfield, United States MODEL. . COMBIREX DZ3000. 3- AXIS GANTRY STYLE. YES. ESAB m3 360 AMP PRECISION PLASMA SYSTEM. PB-MB-1 HS PLASMA STATION. YES. RACK AND PINION DRIVE SYSTEM. ... moreYES.
Buy It Now
Condition: Used Location: Detroit, United States Please Refer To Machine# 944911 American Vertical Pull-Up Broach VP3-10-30 B8096 Broaches- Vertical Surface Single Ram Tonnage 10 Ton. Manufacturer American ... moreVertical Pull-Up Broach. Single Ram. Model No. VP3-10-30. Serial No. 6448. Year Mfg. 1953. Stroke Length 30" Motor HP 15. Condition Good. Comments FOB Point Elk River MN.
Buy It Now
Condition: Used Location: Byron Center, United States 2022 DOOSAN DNM 4000 CNC Vertical Machining Center. Work Probing System. Tool Probing System. 1-945ipm Cutting Feed Rates. 20 Station Tool Changer. The ... moremachine is being sold "as-is, where-is" with no warranty.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Maximum Angle: 8" x 8" x 3/4". Minimum Angle w/ Probe: 1.5" x 1.5" x 0.25". Unless specifically stated in writing by PMS, all freight carriers must use ... moreflat bed truck only. Maximum Channel (Web Punching and Marking Only): 12".
Buy It Now
Condition: Used Location: Toledo, United States All specifications subject to verification, machine in plant and is under power. Machine has under 500 hours on it. Table Size: 165.3” x 80.7”. Spindle ... moreNose to Table: 5.9” - 47.8”. Table Load Capacity: 22,000 lbs.
Buy It Now
Condition: Used Location: Elk Grove Village, United States All machine sales are subject to machine availabilty. X/Y Helical Rack and Pinion Drive System. Z Ball Screw Drive. Unless specifically stated in writing ... moreby PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Houston, United States NO WARRANTY. Production cut speeds are the result of Hypertherm's laboratory testing. PLASMA CUTTER: POWERMAX85 PLASMA CUTTER. Duty cycle @ 40°C (104°F)CSA ... more60% @ 85 A, 230 – 600 V, 3-PH. 60% @ 85 A, 480 V, 1-PH.
Buy It Now
Condition: New Location: Rancho Cucamonga, United States Idler wheel motion detector with blade stalling and breakage shut off. Preset cut counter with shut off. Shuttle type automatic feed. Machine Weight: ... more3215 lbs. Minimum Cut Off Length.4”. Flushing hose for machine cleaning.
Buy It Now
Condition: New Location: Pawleys Island, United States It has a 3 phase motor and transmission to increase spindle speed to 14000 RPM. A spray mist tool cooling system allows machining up to 3mm thin walled ... more(0.12?). aluminum profiles. Machine is typically used to make hardware cut-outs, water slots and holes on aluminum or PVC window and door profiles.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Maximum Channel (Web Punching and Marking Only): 12". Minimum Channel (Web Punching and Marking Only): 3". Maximum Angle: 8" x 8" x 3/4". Minimum Angle ... morew/ Probe: 1.5" x 1.5" x 0.25". Capacity Double Shear Cut: 8" x 8" x 3/4" - 215 Ton.
Buy It Now
Condition: Used Location: Marshfield, United States Number of Hold Downs (Hydraulic): 11. Catalogue Specifications Capacity (Mild Steel): 1/4". Unless specifically stated in writing by PMS, all freight ... morecarriers must use flat bed truck only. Front Operated Programmable Power Back Gauge.
Buy It Now
Condition: Used Location: Casa Grande, United States KASTO BBS 1260/1560 Traveling Column Vertical Plate Saw; • Serial Number 101-001-6313/85074 (1990) • 60" Throat Depth • 50" Max Workpiece Height • 198" ... moreMax. Casa Grande, AZ.
Buy It Now
Condition: Used Location: Paducah, United States ES-5 Panel Saw.Saw is designed for high production& tight cutting.The machine is equipped with a 3hp. Single-phase 220v motor. SPECS. Max Horizontal ... morecut 125" Max Vertical cut 61" Max Depth of cut 2 1/8" Saw blade diameter 10" Motor power 3 Hp Spindle speed 2800RPM Voltage 220 1- Weight 995 lbs FRAME DIMENSIONS. Length 161.5" I can arrange for shipping which is included in the price. This saw retails between 15.000.00 and 19,000.00 Recent sales have been 6500.00 and 7.700.00 on other auction sites Google it If you want and need production this is it Depth with carriage 41.5" Height with carriage 95" All parts are available thru dealers of the saw. I have PDF's and Dealer information that has all Parts Availibilty to keep you in Production for years.
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Condition: Used Location: Holland, United States 13' MODERN LONG BAR COMBINATION LOADER HOPPER TABLE. Type: Tube Machinery, Cut Off. 1/4" - 3-1/4" OD CAPACITY. 41" TARGET STOP. LEFT HAND MACHINE. 1/2 ... moreHP COOLANT PUMP MOTOR. 10 HP 220/3/60 MAIN MOTOR.
Buy It Now
Condition: New Location: Rancho Cucamonga, United States Idler wheel motion detector with blade stalling and breakage shut off. Preset cut counter with shut off. Motors: blade drive 7.5 hp., hydraulic pump 2 ... morehp., coolant pump ¼ hp. Everising S-400HB Fully automatic Band Saw New .
Buy It Now
Condition: Used Location: Alto, United States Asset # 16104. With Special Blades, L at 90 Degrees 5” x 5” x 1/2”. Flat Shear Capacity 12” x 5/8”. Length of Blades 12”. Number of Strokes per Minute ... more25. Angle Station 100 Tons. We are always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications Maximum Swing: 31.7". X-Axis Travel: 22.64". Z-Axis Travel: 118". SMWSLU-4-ZS Powered Steady Rest 1.18" - 9.64" Cap. Spindle ... moreMotor: 50 HP. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Alto, United States Asset # 13978. • Wheel Dresser. Fanuc Power Mate 7.2 inc. LCD Display. Vertical Range Standard 36”. Standard Grinding Horsepower 200 HP. Standard Features ... moreWe are always looking to buy machinery ?.
Buy It Now
Condition: Used Location: Alto, United States Bertsch Plate Roll. Top roll counterbalance action by hydraulic cylinder. Rolling Speed – 14 fpm. Each side roll hydraulic system provides sufficient ... morepower to prebend up to the full rated capacity plate.
Buy It Now
Condition: Used Location: Prospect Heights, United States X Axis 30.0 in 762 mm. Y Axis 20.0 in 508 mm. Z Axis 20.0 in 508 mm. Spindle Nose to Table (~ max) 24.0 in 610 mm. Spindle Nose to Table (~ min) 4.0 in ... more102 mm. Max Speed 15000 rpm 15000 rpm. Max Torque 90.0 ft-lbf @ 2000 rpm 122.0 Nm @ 2000 rpm.
Buy It Now
Condition: Used Location: Ottumwa, United States Rapid Traverse Speed - X Axis: 3150 IPM. Rapid Traverse Speed - Y/Z Axis: 2360 IPM. Robot Interface via Profibus. Linear Drive X-Axis. Spindle Taper: ... moreCAT 50. Preliminary Specifications Subject to Verification.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec#2404. 1) Used 16 Stand BRADBURY Roll ... moreFormer; On(2) 8 Stand Bases-All Gear Driven; Un-Equal Gearing. Specifications: Shaft Diameter.3" Vertical Center Distance.4.5"9" center to center Horizontal Center.20" Pass Line Height.38" existing tooling) Machine Base Height.26" Roll Space.37" Roll Speed.0-95 fpm. Motor.40 HP. Electrical Characteristics.230/460 VAC/ 3 Phase/ 60 Cycle. Equipped With: All Stands Simultaneously Clutched. Entry Guides Vari-Speed Drive. Bradbury Flying Cut-Off Press Model C.0.S; S/N 14974. 16 Right Angle Helical Gear Drives. Overall Dimensions.35' L-R x 6' F-B x 5' Tall(estimated) Weight.42.000 lbs. F.O.B.Casa Grande. AZ. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cr
Buy It Now
Condition: Seller refurbished Location: Byron Center, United States This is a fully functional complete robot setup. Ideal for Material handling, welding or plasma cutting. Easy to program, long lasting robot.
Buy It Now
Condition: Used Location: Alto, United States Asset #1812. Hydraulic pump motor 1-1/2 hp. Height floor to work surface 39". Approximate floor space 87" x 110". Spindle drive motor (1985 rpm) 3 hp. ... moreMachine is equipped with automatic Bijur lubrication system and 8" x 24" electro-magnetic chuck.
Buy It Now
Condition: New Location: Lithia, United States We at Southern Fabricating Machinery Sales are manufacturer's just like you. Number of Plate Hold Downs: 21. Squaring Arm: 40". Back Gage: 40". All Price, ... moreLocation and Specifications Subject to Change without Notice .
Buy It Now
Condition: Used Location: Perrysburg, United States Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. All machine sales are subject to machine availabilty. ... moreTube Wall Thickness: 0.32" (or Max. Tube Cut Length: 24". ).
Buy It Now
Condition: Used Location: Lithia, United States Located in the Tampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer. Southern Fabricating Machinery ... moreSales, Inc. We at Southern Fabricating Machinery Sales are manufacturer's just like you.
Buy It Now
Condition: Used Location: Alto, United States Asset # 15311J. Adjustable Cutting Force. Blade Size 2” x 26’9” x. 063”. Guide Cap Camlocks. Powered Guide Arm. We are always looking to buy machinery ... more1 piece or entire plants. Capacity 25” x 30”. Motor 15 HP.
Buy It Now
Condition: Used Location: Chicago, United States (1) Used 3/4" x 12' CINCINNATI Hydraulic Power Squaring Shear. Cincinnati Heavy-Duty Sheet Stacker (S/N 48968). Automatic Pressure Lubrication System. ... moreF.O.B. Cincinnati, OH. Model 6SE12, S/N 48967, New 1995.
Buy It Now
Condition: New Location: Alto, United States Akyapak includes 1 to 300 tons conventional rotators in its standard lists. However, custom production can be realized up to 600 tons. Asset #15478. Conventional ... morerotators comprise of two units as 1 drive and 1 idle unit.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2512(1) Used 10' x 10 ga. Cincinnati ... moreModel 1010 Mechanical Shear; S/N 31411 Specifications: Maximum Capacity.10 ga. Length of Cut.126" Length Between Housings.123" Shear(Rake) Angle Taper Per Foot.7/16" Gap(Throat)6" Distance Bed to Floor.32" Speed.65 spm(nominal) Size of Four-Edged Knives.1" x 2 7/8" x 126" Length of Knives.1226" Motor.5 HP@ 1610 RPM. Electrical Characteristics.208/220/440 VAC/ 3 Phase/ 60 Cycle. Equipped With: 36' FOPB Oiler/ Lubrication System. Power hold down system. Squaring Arm-6' Complete Electrical Controls. Overall Dimensions.153' L-R x 75' F-B x 70' High(est. Weight.11.000 lbs. est. F.O.B.Casa Grande. Arizona*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan
Buy It Now
Condition: Used Location: Alto, United States Asset #15745. Capacity at 3° Cant: 17.5” horizontal, 22” vertical (Column in forward cant position). Feed Range: 0 – 250 lbs. Marvel patent pending Quick ... moreChange Column is standard on all machines. Allows column to be set either upright or at a 3° forward cant.
Buy It Now
Condition: Used Location: Ottumwa, United States Rapid Traverse Speed - X Axis: 3150 IPM. Rapid Traverse Speed - Y/Z Axis: 2360 IPM. Robot Interface via Profibus. Linear Drive X-Axis. Spindle Taper: ... moreCAT 50. Preliminary Specifications Subject to Verification.
Buy It Now
Condition: Used Location: Prospect Heights, United States 13' X 22' CMS AQUATEC 3400 + 3400 5-AXIS TWIN TABLE CNC WATERJET SYSTEM NEW 2017 - CMS AQUATEC 3400 + 3400. AQUATEC 3400 + 3400. XY Worktable area regular ... moretable 4000 x 2000(157.4 x 78.7) mm(“). XY Worktable area regular table 4000 x 3000(157.4 x 118.1) mm(“).
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2661(1) Used 50 TON DAHLSTROM Model ... more50TP High Speed Cut Off Press; 4 Post Type; Air Clutch/Brake; S/N P769 Specifications: Capacity.50 tons(bottom stroke) Distance Between Posts.19" L-R x_ F-B Distance Between Guide Bushings. Stroke.2" Distance Bed to Floor.44 1/2" Speed.300 spm(est) Motor.10 HP Electrical Characteristics.230/460 VAC/ 3 Phase/ 60 Cycle Equipped With: Complete Electrical Controls Fawick Air Clutch/ Brake Overall Dimensions.75' L-R x 47' F-B x 61' High(est. Weight.4.000 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers)
Buy It Now
Condition: Used Location: Guadalajara, Mexico Bystronic ByLoader 4020 Load / Unload System. Catalogue Specifications Laser Power: 6000 Watts. Unless specifically stated in writing by PMS, all freight ... morecarriers must use flat bed truck only. All machine sales are subject to machine availabilty.
Buy It Now
Condition: Used Location: Denmark Model: Kjellberg FineMarker. The FineMarker was in working condition when it was removed from the SATO Plasma machine(Year2004) in 2012. While it has ... morenot been tested recently, it should be in working condition based on its history and storage conditions.
|