|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40112 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. Nominal Value: 10 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 5 Ohm; S equential connection 10 7 Ohm; Nominal connection of 1 stage 10 6 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 3 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40112 1 General information about device 1.1. Resistance standards Р40112 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40112 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40112 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40112 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40112( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmospheric pressure 84-106.7 k
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P4023 Unovalued resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Permissible resistance changes of coil P4023 ... moreper year (instability) do not exceed ± 0.005%.
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. P3 22 Coil, Unevalued resistance standard resistor. ... more(It ismax error (accuracy) which is given per manufacturer. ).
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P321 or P331 Coil. Unevalued resistance standard resistor. P321 or P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET ... moreLabs device has the same or better characteristics: Nominal values 0.1 or 1 or 10 or 100 or 1000 or 10000 or 100000 Ohm. For sale is one of coils. You may choose a value for your consideration) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.1 P321 100 15 20 3 20 4 0.1 0.05 3.2 1000 1 P321 100 15 20 3 20 4 0.1 0.05 1 1000 10 P321 100 15 20 3 20 4 0.1 0.05 0.32 1000 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 1000 P331 100 8 20 2 20 10 0.1 0.025 0.032 1000 10000 P331 100 8 20 2 20 10 0.1 0.025 0.01 5000 100000 P331 100 8 20 2 20 10 0.1 0.025 0.0032 50000 Electrical resistance coil Represents an exemplary resist ance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Accuracy class 0.01 Electrical resistance coil represents an exemplary resistance standar
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. NEW. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 000 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10000 P331 100 8 20 2 20 10 0.1 0.025 0.032 50000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 100 000 Ohm; Accuracy class 0.01 Electrical resistance coil P331 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P331 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P331 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P321 Coil. Unevalued resistance standard resistor. NEW. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 1 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 1 P321 100 15 20 3 20 4 0.1 0.05 1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 1 Ohm; Accuracy class 0.01 Electrical resistance coil P321 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P321 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P321 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more than ±
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 10 000 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10000 P331 100 8 20 2 20 10 0.1 0.025 0.01 5000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. No
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P321 Coil. Unevalued resistance standard resistor. USED. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.1 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.1 P321 100 15 20 3 20 4 0.1 0.05 3.2 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal r
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P401 7 Unevalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. Device has the same or better characteristics: ... moreNominal Value: 10 Mohm; High Accuracy class: 0.005% Nominal voltage 100 V; Max voltage 150 V; MTBF 2.500 hours; The average service 10 years; Dimensions 115х125х260 mm; Weight 1.8 kg. Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P4017 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Resistance standard P4017 designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions. Nominal resistance 10 7 Ohm Accuracy class 0.005 Resistance standard P4017 is designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions: ambient air temperature(20 ± 5) °C. Relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa(630-800 mm Hg) Type of climatic modification is YXL 4.1 according to GOST 15150, but at ambient air temperature(20 ± 5) °C. Resistance standard P4017 is nonrecoverable. Single-channel, single-functional device. Technical characteristics Basic parameters and OKP codes of standard P4017 are shown in table 1. Standard P4017 dimensions are not more than 115x125x260 mm.Weight is not more than 1.8 kg. Acceptable deviation of standard P4017 actual resistance value fr
Buy It Now
$150.00 Shipping Condition: Used Location: Ukraine P4067 Multivalued resistance standard transition resistor- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. But has the same or better characteristic: ... moreElectrical resistance transitional standard Р4067 is designed to transfer electrical resistance in dc measuring circuits. Nominal Value: 10 Gohm; High Accuracy class: 0.05% Nominal voltage 3000V: Parallel connection 1000 V; Series connection 3000V; Max voltage: Parallel connection 1000 V; Series connection 3000V; Type of the current: DC; MTBF: not less than 5000 hours; The average service: at least 10 years; Dimensions: 340x280x300mm; Weight: 12 kg; Warranty 12 month. Technical characteristics of electrical resistance transitional standard Р4067: Temperature– from 15 º C to 25 º C; Relative humidity- 65% ± 15% Atmospheric pressure- 100kPa ± 4kPa( 750mm Hg ± 30mm Hg) Accuracy class of electrical resistance transitional standard Р4067- 0.05; Nominal resistance- 10 8 Ohm. 10 10 Ohm; Electrical resistance transitional standards’ Р4067 basic error of electrical resistance transfer- 0.0010% Parallel connection of stages Consistent connection of stages Standard’s voltage Standard’s voltage nominal maximum nominal maximum 1000V 1000V 3000V 3000V Acceptable basic error of standard, in percentage from nominal resistance value does not exceed ± 0.05% Acceptable additional error of electrical resistance transitional standard Р4067 at ambient temperature range from 15 º C to 25 º C for every 5K is less than a half of acceptable basic error; Dimensions– 340x280x300mm; Weight- is not more than 12kg; Mean time between failures of electrical resistance transitional standard Р4067- is not less than 5000 hours. This device was also used in USSR and Russian army. So it has the best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +14
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P321 Coil. Unevalued resistance standard resistor. USED. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 10 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10 P321 100 15 20 3 20 4 0.1 0.05 0.32 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal re
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine P40112 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. Nominal Value: 10 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 5 Ohm; S equential connection 10 7 Ohm; Nominal connection of 1 stage 10 6 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 3 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40112 1 General information about device 1.1. Resistance standards Р40112 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40112 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40112 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40112 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40112( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmospheric pressure 84-106.7 k
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil. Unevalued resistance standard resistor. NEW. P310 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.001 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.001 P310 100 20 20 5 20 5 0.1 0.05 32 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P310 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 0.001 Ohm; Accuracy class 0.01 Electrical resistance coil P310 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P310 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P310 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not mo
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil, Unevalued resistance standard resistor. Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. ... more(It ismax error (accuracy) which is given per manufacturer. ).
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P310 Coil. Unevalued resistance standard resistor. NEW. P310 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.01 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.01 P310 100 20 20 5 20 5 0.1 0.05 10 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P310 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 0.01 Ohm; Accuracy class 0.01 Electrical resistance coil P310 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P310 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P310 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine Standard - imitator P4085 -M1 is designed to reproduce electrical DC resistance in macroclimatic regions with temperate, cold and tropical climates. Nominal ... moreValue :1 Gohm, 10 Gohm, 100 Gohm, 1000Gohm;.
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil. Unevalued resistance standard resistor. P310 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device has ... morethe same or better characteristics: Nominal values 0.001 or 0.01( For sale is one of coils. You may choose a value for your consideration) Accuracy class: 0.01% I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.001 P310 100 20 20 5 20 5 0.1 0.05 32 1000 0.01 P310 100 20 20 5 20 5 0.1 0.05 10 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristics. Condition: USED( lightly used. From an old stock) Item may have some visible scraches or bad paint etc. Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration cer
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine P40114 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics. Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. Nominal Value: 1 Gohm; Total measureg range: 0.01-1GOhm; High Accuracy class: 0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 7 Ohm; S equential connection 10 9 Ohm; Nominal connection of 1 stage 10 8 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years; Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40114 1 General information about device 1.1. Resistance standards Р40114 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40114 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40114 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40114 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40114( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% a
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. NEW. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 10 000 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10000 P331 100 8 20 2 20 10 0.1 0.025 0.01 5000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 10 000 Ohm; Accuracy class 0.01 Electrical resistance coil P331 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P331 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P331 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is n
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P321 Coil, Unevalued resistance standard resistor. Nominal values 1 Ohm. ( For sale is one coil). Nominal Value Ohm. Also we can provide other resistance, ... morecapacitance and inductance standards, decade box and other etalons.
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P4013 Unovalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs.But has the same or better characteristics: ... moreNominal Value: 1Mohm; High Accuracy class: 0.005% Nominal Voltage: 220V; Max Voltage: 700V; MTBF: not less than 30.000 hours; The average service: at least 10 years; Dimensions: 115x125x260mm; Weight: 1.8 kg. Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P4013 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Measurement resistance coil P4013 designed to used as a single-valued electrical resistance standard(OMEC) in DC circuits. Nominal resistance 10 6 Ohm Accuracy class 0.005 General information about the devise Measurement resistance coil P4013 is designed to used as a single-valued electrical resistance standard(OMEC) in DC circuits. Operating conditions: ambient air temperature(20 ± 5) °C; relative humidity from 25 to 80% in operating temperature range; atmospheric pressure 84-106.7 kPa(630-800 mm Hg) Type of climatic modification YXL 4.1 according to GOST 15150-69. Measurement resistance coil P4013 belongs to nonrecoverable. Single-channel and single-function devices. Technical characteristics Basic parameters of coils P4013and OKP codes are shown in table. Permissible deviation of resistance coil P4013 actual value from nominal value at primary testing(at manufacturer releas
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P4033 Unovalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. Device has the same or better characteristics: ... moreNominal Value: 100 Mohm; High Accuracy class: 0.005% U max = 1500V MTBF 30.000 hours The average service 10 years Dimensions: 115x125x260mm; Weight: 1.8 kg; Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P 4033 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Measurement resistance coil P4033 d esigned to used as a single-valued electrical resistance standard( OMEC) in DC circuits. Nominal resistance 10 8 Ohm Accuracy class 0.005 General information about the devise Measurement resistance coil P4033 is designed to used as a single-valued electrical resistance standard( OMEC) in DC circuits. Operating conditions: ambient air temperature(20 ± 5) °C; relative humidity from 25 to 80% in operating temperature range; atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Type of climatic modification YXL 4.1 according to GOST 15150-69. Measurement resistance coil P4033 belongs to nonrecoverable. Single-channel and single-function devices. Technical characteristics Basic parameters of coils P4033and OKP codes are shown in table. Permissible deviation of resistance coil P4033 actual value from nominal value at primary testing(at manufacturer release) does not exceed ± 0.01% if following
Buy It Now
$65.00 Shipping Condition: New – Open box Location: Ukraine P4018 Unevalued resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Resistance standard P4018 designed to work ... morein DC and AC circuits as exemplary and working electrical resistance standards in using conditions.
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P321 Coil. Unevalued resistance standard resistor. NEW. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.1 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.1 P321 100 15 20 3 20 4 0.1 0.05 3.2 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 0.1 Ohm; Accuracy class 0.01 Electrical resistance coil P321 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P321 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P321 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more th
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. NEW. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 1000 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 1000 P331 100 8 20 2 20 10 0.1 0.025 0.032 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 1000 Ohm; Accuracy class 0.01 Electrical resistance coil P331 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P331 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P331 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not m
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P321 Coil. Unevalued resistance standard resistor. NEW. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 10 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10 P321 100 15 20 3 20 4 0.1 0.05 0.32 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 10 Ohm; Accuracy class 0.01 Electrical resistance coil P321 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P321 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P321 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more than
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40114 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics. Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. Nominal Value: 1 Gohm; Total measureg range: 0.01-1GOhm; High Accuracy class: 0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 7 Ohm; S equential connection 10 9 Ohm; Nominal connection of 1 stage 10 8 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years; Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40114 1 General information about device 1.1. Resistance standards Р40114 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40114 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40114 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40114 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40114( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% a
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P310Coil. Unevalued resistance standard resistor. P310 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device has ... morethe same or better characteristics: Nominal values 0.001 or 0.01 Ohm. For sale is one of coils. You may choose a value for your consideration) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.001 P310 100 20 20 5 20 5 0.1 0.05 32 1000 0.01 P310 100 20 20 5 20 5 0.1 0.05 10 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristics. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) Those resistance standards. Resistors are analog devices of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the nee
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Ukraine P4030 or P4030 -M1 resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Technical characteristics ofsingle-valued ... moreelectrical resistance standard Р4030М1 or P4030 .
Buy It Now
$90.00 Shipping Condition: Used Location: Ukraine Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
Buy It Now
$35.00 Shipping Condition: Used Location: Ukraine P4030 or P4030 -M1 resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Technical characteristics ofsingle-valued ... moreelectrical resistance standard Р4030М1 or P4030 .
Buy It Now
Free Shipping Condition: Used Location: Seaman, United States Biddle Instruments 560060 motor& phase rotation tester Model 1 Wood Box Manuals. Everything looks in very good condition. Has the original box with ... morethe tester mounted and all original paperwork. Questions please ask. Model 560060 The Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed. Without having to first energize the motor by a temporary hookup from a power source, if available, to determine motor rotation. Therefore, the test set eliminates the need for temporary connections that can be time consuming, costly and quite hazardous, particularly where many large, high-voltage motors are involved. Also. Certain types of drives should never be rotated in the wrong direction. In such cases, the temporary hookup or trial method, having a fifty-fifty chance of being wrong, can do serious harm. The three motor leads on the left side of the test set are for attachment to the terminals of the motor being tested for rotation determination. Fuses are inserted in the motor A and C test leads as protection in the event the user accidentally touches these leads to an energized circuit. These standard fuses are easily removed and replaced from their panel-mounted holders. The three lines leading to the right of the test set are for direct attachment to energized ac power systems up to 600 volts to determine the system phase sequence. A four-position switch selects the test to be made- system phase sequence. Motor rotation and transformer polarity. The selector switch connects a D-size dry cell into the circuit when the rotation of a motor or the polarity of a transformer is being checked. In the OFF position, both the meter and the battery are disconnected from all circuits. A push switch is connected in series with the battery and opens the circuit during transformer polarity testing.
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil, Unevalued resistance standard resistor. Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. ... more(It ismax error (accuracy) which is given per manufacturer. ).
|
|
|
|
AVO Biddle MBITE 246005 Test Source Leads Fluke Probe carrying bag Free Shipping
AVO Biddle MBITE 246005 Test Source Leads. Fluke Probe& carrying bag Free Shipping Up for auction are these AVO Biddle Miniature Battery Impedance Tester"MBITE" Test source Leads and Fluke AC Current Probe with caring case. These all were in working condition when taken out of service. The caring case has velcro to attach to most Biddle Megger caring bags. Please check out the photos and if you have any questions feel free to e-mail us. All payments are due at end of auction. Paypal is the only method of payment. Please if you can not purchase through paypal. Do not bid! All Auctions must be paid in 5 days or a NON-PAYMENT claim will be filed* All orders will be shipped with in 24 hrs of cleared payment. Any items paid during the week-end will be shipped on Monday. I use Priority Mail shipping to U.S. only. Please allow 2-3 ... moredays for delivery. We do combined shipping. But only with auctions ending within 3 days of each other. Please E-mail if you have a question regarding a longer time frame. For International shipping please e-mail me for shipping quote before auction ends. Please allow a few days for response. New York state residents there will be a 8.5% sales tax added to your order. Due to the age of some items. Some sales are final so please e-mail me questions before bidding. For International shipping please request quote before bidding! We do not end auctions early so please don't ask. We reserve the right to file NON-PAYMENT claim if payment is not received in 5 days. Always feel free to e-mail us with any questions you may have. Feedback will be left within a few days of cleared payment. And feedback is always appreciated. 14 day return policy.Return Authorization Number{RMA} required. Please contact us for more information. 14 day returns require RMA{Return Authorization Number} Please E-mail us with reason for return. At that time we review the issues, then give a RMA if needed. Buyer is responsible for all return shipping cost. Tracking number, insurance& packagi
|
|
|
Biddle Megger 250260 Direct Reading Earth / Insulation Tester Complete Used
You are buying a used Biddle Megger 250260 direct reading earth tester. This sale includes the following components: One Biddle 250260 direct reading earth tester, One Red set of leads, One Yellow set of leads, One Blue set of leads, One Biddle 10245 calibrator accessory, One Biddle instruction manual, One Biddle"getting down to earth" manual, Several unused grown resistance test record sheets, One Biddle carrying case with strap The megger is fully functional and in good usable condition. This item will come as pictured. Shipping will be free to the lower 48 states or $80.00 Worldwide.
|
|
|
Biddle Megger 250200 DET 2/110 Ground Earth Tester
Biddle/ Megger Ground Earth Tester Unit Catalog# 250200 Part# DET 2/110 Serial# K669 This is a completely self-contained instrument designed to give accurate measurements of earth electrode resistance. Soil resistivity, etc. Specifications: Earth resistance ranges: 0.001- 1,999 O 0.01- 19,99 O 0.1- 199,9 O 1- 1999 O Accuracy: +/ of reading +/ 2 digits Temperature effect: +/ per degrees C Working temperature range: 15 to +50 degrees C Storage temperature range: 30 to +7 degrees C Test frequency: 128 Hz reversing DC Interference: Steady interference voltages DC. 50 or 60 Hz will be rejected. The effect of transient noise is minimized by a switched filter Max interference: 2O range low current +/ 5V peak 2O range normal current +/ 10V peak All other ranges and currents +20 V peak Filter time constant: Normal(filter switch"out" 1 second ... moreLong(filter switch"in" 10 seconds Test current: High: 40 mA Normal: 10 mA Low: 5 mA Max current spike resistance: the maximum permissible resistance of the current loop depends on the test current selected: High current: 800O Normal current: 3.5k O Low current: 7.5k O Maximum potential spike resistance: the input impedance between the potential terminals is-2mO. A maximum potential loop resistance of 10kO will give an additional error of 0.5% Output voltage: 50V maximum from the C1. C2 terminals
|
|
|
Biddle Seely Tester 577400 for Energized Winding Resistance Measurements 125V
James Biddle Co. Seely Winding Tester Model 577400, Max Volts- 125, Max load- 15 Amps/ 2.4 HP, For measuring resistance of energized electrical windings, Can be used for checking: Induction motors, Transformers, Induction coils, Heater coils, Solenoids, Looks to be in excellent condition, Unit has not been tested- Sold As Is, Case is approximately 13" x 10" x 7" and weighs about 35 lbs, Please contact us if you have any further questions, We charge 8.25% sales tax for all items shipping within Illinois. Including local pickups. Tax exemption is available if we are provided with a valid Illinois resale certificate.
|
|
|
AVO Biddle Multi-Amp MS-2 High Current Circuit Breaker & Overload Relay Test Set
AVO Biddle Multi-Amp MS-2 High Current Circuit Breaker& Overload Relay Test Set ITEM DESCRIPTION: Used. Very good condition. Unit powers up, has been tested and is operational. Physical appearance is very good, appears to have less than average use. ACCESSORIES: Cables as shown in photos. GENERAL INFORMATION& SPECIFICATIONS: The MS-2 test set is used around the world by several thousand utility companies. Industrial plants and electrical service organizations. Using the latest technology, Model MS-2 is a self-contained test set that incorporates a variable high-current output and appropriate control circuitry and instrumentation for testing thermal, magnetic or solid-state motor overload relays; molded-case circuit breakers; and ground-fault trip devices. Features: Digital memory ammeter: High-accuracy. Directreading instrument has ... moreread-and-hold memory for measurement of short-duration currents. Digital. Multirange timer: Crystal-controlled, highaccuracy instrument with autoranging measures operating time to 1 millisecond. High-current output: Provides instantaneous currents up to 750 amperes through a 125 ampere breaker. Rugged and lightweight: Unit weighs only 33 lb(15 kg) and is tough enough to withstand daily field or plant use. Solid-state output initiate circuit: Solid-state circuit eliminates need for contact maintenance. Input 120 volts OR 240 volts. 50/60 Hertz single-phase, Output Ranges 0 to 120 volts at 5 amperes 0 to 24 volts at 25 amperes 0 to 6 volts at 120 amperes 0 to 3 volts at 240 amperes, Output Capacity The test set is capable of testing the time delay characteristics of devices rated up to 125 amperes using a test current of three times their rating(375 amperes) Additionally. To perform an instantaneous trip test, it will provide 750 amperes through a typical. 125-ampere, molded-case circuit breaker connected with the test leads provided with the test set, Ammeter Display: 3½-digit Ranges(switch-selected) 0 to 1.999/19.99/199.9/750 amperes, Timer Display: 5-digit Ranges(switch-s
|
|
|
AVO Biddle TTR Transformer Turn-Ratio Test Set CAT: 550005
AVO Biddle TTR Transformer Turn-Ratio Test Set CAT: 550005 ITEM DESCRIPTION: Used. Good physical condition- untested. ACCESSORIES: Cables as shown in photos. GENERAL INFORMATION& SPECIFICATIONS: The Biddle Single Phase TTR? Transformer Turns Ratio Test Set measures the turns ratio and exciting current of windings in power. Potential and current transformers. Deviations in turns ratio readings indicate problems in one or both windings or the magnetic core circuit. The TTR test set aids in identifying: Shorted coils. Open circuits. Incorrect connections. Internal faults or tap-changer defects in step regulators as well as in transformers. The single phase model is available in either hand-cranked or line-operated versions and measures highly sensitive turns ratios of up to 129.99:1 with accuracy of ± 0.1% An optional auxilary transformer ... moreextends the ratio range to 329.99:1. The TTR set operates on the principle that the voltage ratio of the transformer at no load is practically equal to the true turns ratio. The major source of error in a transformer is a primary impedance drop due to magnetizing current. Which is kept to a minimum by excitation at a fraction of rated voltage. By employing a design that meets both of these condi tions along with the use of a null balance system. The turns ratio of a transformer can be determined accurately. When measuring the turns ratio of distribution and power transformers. The accuracy is well within 0.1% DATASHEET LINK: Powered by SixBit's eCommerce Solution
|
|
|
Biddle DLRO Digital Resistance Ohmmeter W 2 Test Leads Megger 247001
This was left behind by a renter in a rental house we own. Tried to contact him but no luck in 6 months so we are selling. Plugged it all in and in excellent working condition. See all photos.ohmmeter with plug and 2 test leads. Biddle instruments. Megger. Cat no 247001. Serial no 51528 0606. Make an offer!
|
|
|
Megger Biddle Instrument. Model 2096989
Fully functional. Normal cosmetic wear. As with all electronics. No warrantee is expressed or implied that. Item is to be paid for with in 24 hours.
|
|
|
BIDDLE DIGITAL TACHOMETER 359980 (7831)
SOLD AS IS SHOWN SOME COSMETIC WEAR WE HAVE NOT TESTED ITEM NOR DO WE KNOW HOW TO. WE ARE LIQUIDATORS AND GET ITEMS FROM AUCTIONS/ BANKS CLOSING DOWN DIFFERENT COMPANIES. ETC. IF ITEM FAILS TO WORK WE DO OFFER A 14-DAY RETURN POLICY
|
|
|
MEGGER , BIDDLE, MULTI-AMP , TTR20 SINGLE PHASE TTR TURN RATIO TEST SET
YOU ARE LOOKING AT A TTR MODEL TTR 20 SINGLE PHASE SYSTEM FROM MEGGER COMPANY VERY NICE CONDITION. TEST LEADS AND(PROTECTION) CASE I NCLUDE. THE TTR POWER UP AND PERFORM VERY WELL AS YOU CAN SEE IN PICTURE. NO OTHER TESTS WAS PERFORM ON THIS UNIT. YOU MUST HAVE MORE THAN 10 POSITIVE COMMENTS TO BID ON THIS ITEM. THIS ACTIVE SOURCES WAS SURPLUS AND REMOVE FROM GOVERNMENT ELECTRICAL FACILITIE. NO WARRANTEE. NO RETURN. NO MONEY BACK ITEM SOLD AS-IS BECAUSE WE DO NOT CAN CONDUCT ALL APPROPRIATE TESTS. BUYER IS RESPONSIBLE FOR SHIPPING.INSURANCE, DUTY HANDLING.BROKERAGE FEES AND GOVERNMENT TAXES. THANK YOU FOR LOOKING AND HAPPY BIDDING
|
|
|
Lot Aerospace Electrical Test Tools AVO Biddle Tachometer Fluke Multimeter More
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2431571.4 A: 0013000000CXCfg O: 0065000000TQyVo PA: View Photo Gallery. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Lot Aerospace Precision Test Tools AVO Biddle Tachometer. Multimeter This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Lot includes various tools used by consignor in an aircraft manufacturing environment. ... moreWe are not able to itemize or quantify the entire lot of tools offered. Please view the photos to get a sense of what is included. Overview: Type: Assorted Test Equipment Features/Specifications: 4x) Avo Biddle Digital Hand Tachometer Model: MTL39. 2 Range(3x) Blue-Point Tachometer(3x) Fluke Multimeter(1x) Mitutoyo digimatic indicator Other test tools(Please see photos for more details) Dimensions& Weight: Dimensions: L 22" x W 16" x H 8" Shipping Weight: 28 lbs Condition: Unknown/untested All units will have labels. Engraved asset control numbers and/or position control adhesive Normal to heavy wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition,
|
|
|
EIL AVO Biddle Megger Multi-Amp FTS-300 Frequency Test Set (B12-3022-1)
AVO Biddle Megger Multi-Amp FTS-300 Frequency Test Set For Testing Frequency Relays. Voltage Relays, Excitation Relays etc. Manufacturer Specification/Manual: 30 Day Returns. COMPLETE Asset Liquidation: Major NA OEM Motor Repair Facility. For Questions or Expedited Shipping Please Contact SCIO Industrial LLC at +1 734 644 1793 Mon-Fri 08:00-17:00 US EDT. International Buyers Please Contact Us For a Shipping Quote Prior To Purchase. US Federal Export Law Applies. About Us: We are an Asset Solutions Company Proudly Serving South East Michigan. We Buy and Sell Surplus Assets from Single Machines to Complete Facilities. Turn Your Idle or Surplus Assets Into Cash Quickly and Painlessly. For More Information Please Contact SCIO Industrial LLC at +1 734 644 1793 Mon-Fri 08:00-17:00 US EDT. BUYER AGREES TO THE FOLLOWING TERMS AS A CONDITION OF SALE. ... moreTHE ITEM SOLD IS BEING SOLD ON AN“AS IS– WHERE IS” BASIS. WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SELLER SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS. INCONVENIENCE, EXPENSE FOR SUBSTITUTE PROPERTY OR SERVICE. STORAGE CHARGES, LOSS OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR MISUSE OF. OR INABILITY TO USE THE ITEM SOLD. IN NO EVENT SHALL SELLER’S LIABILITY EXCEED THE AMOUNT BUYER PAID TO SELLER TO PURCHASE THE ITEM SOLD. BUYER ASSUMES ALL RISK AND LIABILITY FOR LOSS. DAMAGE OR INJURY TO BUYER AND BUYER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF. OR INABILITY TO USE THE ITEM SOLD. BUYER HAS COMMERCIAL EXPERIENCE WITH THE CLASS/TYPE OF ITEM LISTED OR FAMILIARITY WITH THE ITEM IN PARTICULAR. AND ITS TYPICAL AND INTENDED USES.
|
|
|
BIDDLE WHEATSTONE BRIDGE SEELY TESTER 600V MODEL 72-431
Biddle Seely Tester Bridge model 72-431. Used condition from estate sale and untested. Sold as-is- not guaranteed to function. Shipping to US addresses only.
|
|
|
Repair Evaluation Biddle-AVO 246005 BITE
Lease& Rental- Asset Recovery- Repair services- Parts sales- Referral Commissions- Trade-Ins- 500 Central Ave. Farmingdale. NJ 07727 Ph: 732-919-3339 Fax: 732-919-3332 Services Offered: Option Upgrades! Lease& Rental Options, Extended Warranties, Service Contracts, Calibration Services, Repair services Parts sale, For any questions regarding our repair and service. Please email us at Express Test to Your My eBay Favorite Sellers List Express Test's other eBay auctions! Alltest Instruments Inc. Express Test 500 Central Ave Farmingdale. NJ 07727 Phone: 732-919-3339 Fax: 732-919-3332 We provide high quality used test equipment manufactured by Agilent. Tektronix, Anritsu, Rohde& Schwarz, Ando, Keithley, Fluke, and Giga-tronics, and more. With over 15 years of experience in the used test equipment field we can help you find the ... moreequipment you are looking for at affordable prices. Vast consignment inventory.
|
|
|
JAMES BIDDLE 57628 6-24000RPM HAND TACHOMETER D370787
Product Specifications. Brand: BIDDLE, Condition: Parts, Model: 57628, Type: Tachometer Shipping Weight: 1.05 lbs, Shipping Dimensions: 5.88 x 4 x 2.75 in, SKU: D370787(MAG) Category: Electrical· Controls, Additional Notes: 6-24000RPM HAND, Product Photos. $20 USD- We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect Shipping ... morevia UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is not responsible for technical specifications or
|
|
|
** PERFECT CONDITION BIDDLE MEGGER HI - POT TESTER AC/DC **
If you have less feedback than 10. You must Email me prior to bidding. Bids will be canceled if I feel are bogus, and reported to Ebay. Non-payment will also be reported to Ebay immediately. Shipping to continental USA and Canada only. Canada shipping charges will be added at Ebay checkout– please wait for my invoice. This is an item that is in terrific condition. It was removed from working service in the Healthcare field and is no longer needed. This unit has a certification/calibration seal on the top of a hinge. Includes all cables, uncracked case, does what I believe is supposed to when plugged in…but I am not a professional on this type of gear. Terrific item at a much lower cost! I found some information below that is specific to this unit should you need: AC and AC/DC High-Pot Testers available from Biddle/Megger are designed for ... moresafety and ease of operation. And readily adapt to development, maintenance or production testing. Three models are available: two ac and one ac/dc. The AC High-Pot Testers feature a front-panel, NEMA 5-15R three-prong output receptacle. Booted, alligator-clip output and return probes are also supplied with all models. Test voltage is continuously adjustable from zero to full output, with a zero-start interlock. Leakage current trip level may be adjusted from 0.3 to 12 mA by a front-panel knob. Pushbuttons are provided to select one-second or continuous testing, to turn off the high voltage and to reset the instrument. All high-voltage connections are recessed to prevent accidental contact with high voltage. Zero start/reset in event of failure Ground continuity check of three-wire devices with high-voltage interlock(AC models only) Front-Panel adjustable leakage current trip 0.3 to 12 mA One second or continuous testing Recessed high-voltage connections. 230415: 0-4 kV AC Payment must be received within TWO days from auction end. There is no reason it should take longer especially when using the electronic payment option. I do accept other forms of payment. But they must c
|
|
|
BIDDLE 210159 MEGGER HAND CRANK DIRECT READING EARTH INSULATION TESTER USED
BIDDLE 210159 MEGGER HAND CRANK DIRECT READING EARTH INSULATION TESTER USED Condition: USED WE WILL GUARANTEE IT TO BE FUNCTIONAL Items are showing signs of noamal usage& storage. This listing is only including items shown in pictures 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO Call us@ 248-521-7777 thank OR SEE US AT FASTEST3.COM Please allow 4-6 days for shipping and handling. Thank you. If you are not satisfied with your auction item. For any reason, please feel free and return it for a full refund of your purchase price. If you are not happy, we are not happy. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14a95f138cf-0x102-
|
|
|
Biddle Meggar Multi Amp Canada Circuit Analyzer 830210 Model D
Biddle Meggar Multi Amp Canada Circuit Analyzer Catalog No: 830210 Model D S/N: 3818 Up for sale is a Biddle Meggar Multi Amp Canada Circuit Analyzer 830210 Model D. It is in used and working condition. This was purchased from a working test equipment company that closed their business. This unit powers on but nothing came up on the display screen. It needs other equipment to function properly. Please look at the pictures for the best physical description. Information and exactly what is included. What you see in the pictures is exactly what you will receive. I sell with confidence and therefore I offer a 30 Day Money Back Guarantee. Thank you for viewing this item and have a great day! 122214C Shipping Shipping for this item will be $24.99 to the continental U.S. via UPS ground or USPS parcel select. All packages will be insured for a minimum ... moreof the purchase price. We do our best to ship out all orders within 48 hours. Payment PAYPAL is our preferred method of payment. We can also accept all major credit cards through our paypal account. Return Policy We guarantee hassle-free returns. If an item arrives to you in damaged condition or not as described. Please contact us so that we can work out a solution. Any items sold AS-IS, will not fall under our normal policy& will be sold with no implied warranty. We always go the extra mile to earn our customer's satisfaction.
|
|
|
Biddle Meggar AVO 550005 TTR Transformer Turn-Ratio Test Set Y550005
Biddle Meggar AVO 550005 TTR Transformer Turn-Ratio Test Set Y550005 S/N: 15671 Included: User Manual; Certificate of Conformance; Certificate of Calibration; Calibration Data Sheet; Calibration Transformer S/N: 4656 Cal Due 1/15/15 Up for sale is a Biddle Meggar AVO TTR Transformer Turn-Ratio Test Set. It is in used and working condition. This was purchased from a working test equipment company that closed their business. Please look at the pictures for the best physical description. Information and exactly what is included. What you see in the pictures is exactly what you will receive. I sell with confidence and therefore I offer a 30 Day Money Back Guarantee. Thank you for viewing this item and have a great day! 122206C Shipping Shipping for this item will be $29.99 to the continental U.S. via UPS ground or USPS parcel select. All packages ... morewill be insured for a minimum of the purchase price. We do our best to ship out all orders within 48 hours. Payment PAYPAL is our preferred method of payment. We can also accept all major credit cards through our paypal account. Return Policy We guarantee hassle-free returns. If an item arrives to you in damaged condition or not as described. Please contact us so that we can work out a solution. Any items sold AS-IS, will not fall under our normal policy& will be sold with no implied warranty. We always go the extra mile to earn our customer's satisfaction.
|
|
|
AVO Multi-Amp STATES/Biddle-Megger PA-2505-69 Phantom Load
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! AVO Multi-Amp STATES/Biddle-Megger PA-2505-69 Phantom Load Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from Multi-Amp and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit is sold fully tested and guaranteed working. The Unit's Serial Number Tag Reads: Model Number: PA-2505-69 Serial Number: 130738-001/1 Link to the Datasheet: Description: This rugged phantom load operates from a single-phase source and is designed for field testing single-phase and polyphase watthour meters at 50% and 100% power factor. The unit utilizes a heavy-duty selector switch in conjunction with a variable autotransformer to provide continuous adjustment of the load current- a valuable ... morefeature which permits close control of the output for different load circuit impedances or in the event of variations in the source voltage. The unit is rated for continuous duty with forced air cooling provided by a built-in fan. Primary and secondary test leads are furnished as standard equipment. Model PA-2505 is housed in a rugged Formica enclosure with carrying handle and removable hinged cover. Specifications: Primary Voltages: 69/120/240/277/480 volts. Single Phase, 50/60 Hz, fused input circuit. Current Ranges(switch-selected) Full Load: 0 to 2.5/5/15/50 amperes at 50% or 100% P.F. Light Load: 0 to 0.25/0.5/1.5/5 amperes at 100% P.F. Current Control: A variable autotransformer provides continuous control of the output load current from zero to the maximum of each range. Ammeter Circuit: A 3.5" ammeter with mirrored scale. Knife-edge pointer and ±2% F.S. accuracy indicates output load current. The appropriate full scale range is simultaneously selected by the current range selector switch. Output Current Connections: Five output terminals are provided to eliminate the need to change lead conncetions between the phantom load and the reference watthour standard. F
|
|
|
Biddle 560400 Motor and Phase Rotation Meter Tester for 25/50/60/400 Hz
This is in excellent condition for what it is. I have another one that only does 50/60hz.That its all I ever use. So I'm going to pass this one on. Battery compartment looks like new and this includes original instruction book. I simply will not accept returns on used electronics I have no control over the use of. Please keep that in mind when bidding.
|
|
|
"JAGABI" HAND TACHOMETER JAMES G BIDDLE CO. No.K-OS USED
This is a used James G. Biddle"Jagabi" Hand Tachometer. This tachometer is made in Switzerland. The Tachometer does spin freely. Shipping is for the Continental U.S.
|
|
|
AVO MEGGER BiDDLE THREE PHASE TTR 550503 TRANSFORMER TURN-RATIO TEST SET
AVO MEGGER BiDDLE THREE PHASE TTR 550503 TRANSFORMER TURN-RATIO TEST SET AVO MEGGER BiDDLE THREE PHASE TTR 550503 TRANSFORMER TURN-RATIO TEST SET Unit as pictured. Power up and pass self test. Unit calibrated last 1/09. Includes unit mounted in field case and cover and misc recording cards. Power cable included. No other cable included. This unit is sold"as-is" with no warranty expressed or implied as to the fitness of this item for any purpose(s) We will offer thirty(30) day return period for like shipped items. If you would like to return items during the thirty(30) day period. Simply request a RMA(Return Material Authorization) and return unit properly packaged with RMA noted on label within thirty(30) days of receipt via traceable carrier at your expense. Upon return receipt and inspection, you will be issued a refund less shipping ... morecharges. Shipping Shipping will be by FEDEX Ground. International customers are responsible for all customs taxes. Duties, and brokerage fees. Please note that correspondence will only be conducted in English. Payment Details Payment Instructions: Please use the eBay checkout tool to submit payment. Invoices are generated by customer request. Payment accepted in the form of Paypal. Policies Your satisfaction is important. Because I sell surplus items that are new and used. My return policy varies by item. Please see item description for return policy. I will do everything in my power to insure your satisfaction. I leave feedback for Buyers and your feedback is important. gsrx_vers_605(GS 6.9.2(605)
|
|
|
Biddle 260100 Isolated Power System Test Set Iso-Analyzer Unit Industrial
Search our eBay Store! Biddle 260100 Isolated Power System Test Set Iso-Analyzer Unit Industrial SKU: JV-MAT-C-BIDDLE260100 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Biddle 260100 Isolated Power System Test Set Iso-Analyzer Unit Industrial Catalog No. 260100· Unit is untested. The lid hinges are broken. Power cable is not included. Dimensions(L”xW”xH” 7.75*8.75*7.5 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the ... moreunit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. DO NOT bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our
|
|
|
HIGH POWER RHEOSTAT BIDDLE LUBRI-TACT JAGABI 42.5 OHMS
This auction is for a vintage Jagabi tube slide rheostat made by J. G. Biddle Co. As shown in the photos. It's rated at 42.5 ohms, 2.3 amperes. This is a heavy-duty laboratory type device for inserting resistance into a circuit. Heavy binding post connections on each end. Not really practical for turning down the volume on the TV, but if you collect vintage laboratory equipment, this is a valuable addition to your collection.
|
|
|
James G. Biddle Mechanical Tach.,35j10 Mod 455, Original Case, All Accessories
James G. Biddle Mechanical Tachometer 3 Ranges. 30-400, 300-4,000, 3,000-40,000 RPM Original Case. With All Accessories and instructions
|
|
|
Biddle Megger 247001 Digital Low Resistance Ohmeter with Test Leads Mint!!!
For sale is a Biddle Megger 247001 Digital Low Resistance Ohmeter(DLRO) also know as a"ductor" The instrument is in mint condition and has been fully tested. The test leads cat. 242011-7 are included with the instrument. he Megger 247001 Digital Low Resistance Ohmmeter Single-Pak 10 A is a highly accurate instrument that provide a simple. Practical and reliable means of making low-resistance tests in the field. It is also are ideal for production quality control. It operates on the four-wire measurement principle, thus eliminating lead and contact resistances. With basic accuracies of ±0.25% and resolution down to 1 μ Ω, the Megger 247001 is nonetheless designed to be rugged and portable for use at the job site Applications: Switch and circuit breaker contacts Transformers and generators Motor windings Busbar and other joints ... moreAircraft. Rail and pipe bonds Cable splices. Welds and fuses Metal alloys Graphite electrodes and other composites Wire and cable This instrument with test leads retails for over $4500. Shipping is $45 in the USA. International bidders please ask for shipping cost before bidding. Insured shipping is $45 in the continental USA. I can accept payments by paypal. Please e-mail me with any questions that you may have. Thank you for looking and good luck.
|
|
|
Bakelite James Biddle Series 4 Megger Insulation & Resistance Tester
Bakelite James Biddle Series 4 Megger Insulation& Resistance Tester Condition: USED WE WILL GUARANTEE IT TO BE FUNCTIONAL Items are showing minimal signs of noamal usage& storage. ACTUAL ITEMS ARE SHOWING IN PICTURES. 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you. If you are not satisfied with your auction item. For any reason, please feel free and return it for a full refund of your purchase price. If you are not happy, we are not happy.
|
|
|
Biddle 5kV Dielectric Test Set 220005 Series
Auction Wizard 2000 Listing Template- AW2KLOT#755 Up for bid is a Biddle 5kV Dielectric Test Set 220005 Series. This is a used test set. It powers on and seems to be in working condition. It item has only been tested to power on. No further testing has been done. This item is in excellent physical condition. Other than light dust and minor scuffs/scratches. This item has very little visual imperfections. The lid of the case comes off because the screws are not completely secured and have a little surface rust on them from prolonged storage. Please feel free to browse our photos. General Description/Specifications: This portable dielectric test set measures the electrical quantities of applied voltage and resultant current in the apparatus to which it is connected. Designed for field or shop use. The test set is housed in a durable, impact ... moreresistant plastic case, with removable lid and carrying strap. For safety in operation, the control panel of this test set is of grounded metal. Voltage(max) 105 to 130 V Current(max) 1.1 A. Continuous Frequency: 60 Hz full rating. 50 Hz reduced rating Dimensions: 13 1/2" x 9 3/8" x 10" 34.3 cm x 24.8 cm x 25.4 cm) Thank you! We truly appreciate your business! 2-1-1 We appreciate your interest in our items. We sell surplus merchandise and our items are thoroughly inspected before listing but because the history of some of these items are not known. Please contact us with any questions or concerns before bidding. We offer a complete refund policy and no restocking fees for items that are returned. If you have any issues after receiving an item please contact us first so that we can resolve the issue and offer a positive buying experience. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14b7981a3a1-0x109-
|
|
|
JAMES G. BIDDLE CO. MOTOR ROTATION TESTER
ITEM IS VINTAGE AND HAS BEEN USED BUT WAS TAKEN CARE OF. DO NOT KNOW HOW TO USE IT MYSELF BUT THE TEST PROCEDURE WORKED PERFECT AS PER THE INSTRUCTIONS. Payment must be made within 3 days of closing auction. US Bid only. No International shipping. SOLD AS IS NO RETURNS. US Bid only. No International shipping Thank you and God Bless!
|
|
|
Biddle # 405 Cat 230405 AC High Pot High-Pot tester Tested Excellent
Biddle# 405 AC high pot tester Tested working perfectly SN 9449 Cat 230405 This is an excellent deal! The only issue is the plexiglass is faded on the instrument. But you can still read it just fine. This one has the lid. Cover and is easy to carry. IT was used in a desktop postition so it did not move very much. Ships via Fed Ex Ground with in 24 to 48 hours upon completion of payment. US 48 States for $ 18.00
|
|
|
BIDDLE MEGGER 212259 INSULATION TESTER PUSH BUTTON WITH LEADS AND CASE 120VOLT
Up for purchase is a BIDDLE MEGGER 212259 INSULATION TESTER HAND PUSH BUTTON WITH LEADS AND CASE that is in great working condition and has minimal signs of wear and tear and includes everything pictured. Will ship as is. Please see pictures for details. ALL OFFERS WILL BE CONSIDERED. Message us with any questions.
|
|
|
Tachometer Vintage James Biddle Tachometer, in Box with Attachments
I bought this on eBay for my garage display but time to sell it. I am not an expert on these tachs but it all appears to be in great condition for its age. Free economy shipping in the US only.
|
|
|
Original BIDDLE Hand Held Tachometer 30-50,000RPM Hit Miss Gas Engine Dynamo WOW
This is a rather hard to find and VERY high quality original Biddle hand held tachometer. It was made in Switzerland and measures rotating speed from 30 to 50.000 revolutions per minute. It is in excellent slightly used condition and is in it's original case with all of the attachments still in their places. The original instruction card is still under the loop in the cover of the case. The case measures about 7 inches long. These tachometers are extremely expensive new and are top of the line instruments. They are great to have at your disposal when determining the speed of gas or steam engines or dynamos or other equipment that are being driven by them. The pictures tell the story on this nice one. It's as close to new as you could hope to find. I can be reached at 262-573-1931 if you'd like to talk about it. Don't miss ... moreit. Good Luck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14bedc1a1f5-0x113-
|
|
|
Antique vintage Evershed's Testing set Megger 400 volts 1000 James g Biddle Co.
As pictured. Number 713637 400 volts 1000 Megohms Patents 639849-26/12/99 810330-16/1/06 812196-13/2/06 858335-25/6/07 Made in England James G Biddle Co. 1211-13 Arch st. Philadelphia. Has ALTN 1 stamped on wood box. Box in nice condition.Feet are good,handle is intact,but leather coming apart.
|
|
 |