In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
53.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Westfield, United States
As titled. Usable with any windmill pump set up using a flat bar. K20 version with NEW pin. Operates freely. Wear at outside latch hole as shown, but ... morethis does not effect operation.
$
32.00
Buy It Now
$13.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 8ft Baker Monitor WC or AC mills. No breaks or repairs. Sold asnew in excellent usable condition.
$
20.00
Buy It Now
$5.90 Shipping
Condition: New
Location: Westfield, United States
As titled. New stock unused condition. USA made. Your bid is for one short bushing as shown on left. Part number WB-6 1/2 Short Bushing 7/8" X 1 ... more5/8" Save 25% Don't pay list of $14.50 for these parts or any other when you can buy it for less. See our other auctions for WB& WC items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
15.00
Buy It Now
$13.00 Shipping
Condition: New – Open box
Location: Westfield, United States
As titled. Part 6DW07.
$
49.00
Buy It Now
$21.00 Shipping
Condition: New
Location: Westfield, United States
One or more. Spokes for 6.5ft Monitor B or WB mills.
$
5.99
Buy It Now
$8.50 Shipping
Condition: New
Location: Westfield, United States
Perfect condition.
$
15.50
Buy It Now
$10.00 Shipping
Condition: New
Location: Westfield, United States
As titled. New unused condition. USA made. Part number WC-52 pitman guide pin. Comes with cotter pins. Save! Don't pay list of 15.60 for this part ... moreor any other when you can buy it for less. See our other auctions for Monitor items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
11.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Westfield, United States
As titled. New unused condition. No breaks or repairs. Don't pay list of $7.80 for this part or any other when you can buy it for less. See our other ... moreauctions for WB& WC items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
34.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
4.00
Buy It Now
$7.00 Shipping
Condition: New – Open box
Location: Westfield, United States
As titled. Part 8W13B.
$
36.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
This can be used for your restoration as noted above. It includes 2- 48" X 36" sheets as shown for use on both sides of the vane. Each stencil layout ... moreis reproduced from either actual tail vanes or published manufacturer data.
$
75.00
Buy It Now
$59.90 Shipping
Condition: Used
Location: Westfield, United States
As titled. Fits 10ft Baker Monitor L mills. Nice condition as shown.
$
5.00
Buy It Now
$9.00 Shipping
Condition: New – Open box
Location: Westfield, United States
As titled. Part 7DW57.
$
32.00
Buy It Now
$9.00 Shipping
Condition: New
Location: Westfield, United States
Upper vane hinge for a 6.5ft Baker Monitor WB. No breaks or repairs. WB 11 Don't pay list of $41.85 when you can have them for a fraction of the cost. ... moreCall us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
47.00
Buy It Now
$21.00 Shipping
Condition: Used
Location: Westfield, United States
One or more. Spokes for 6.5ft Monitor B or WB mills.
$
5.00
Buy It Now
$9.00 Shipping
Condition: New – Open box
Location: Westfield, United States
As titled. Part 7DW57.
$
47.00
Buy It Now
$15.00 Shipping
Condition: New
Location: Westfield, United States
$
24.99
Buy It Now
$12.00 Shipping
Condition: Used
Location: Westfield, United States
Baker Monitor model AC's pitman guide in good usable condition. No breaks or repairs. Plenty of life. Parts AC 7.
$
20.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Westfield, United States
It will fit your 6.5ft early long mast WB or Hambone B mill without modifications. No breaks or repairs.
$
50.00
Buy It Now
$13.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 10ft Baker Monitor L mills. No breaks or repairs. Sold asnew in excellent usable condition.
$
150.00
Buy It Now
$59.90 Shipping
Condition: Used
Location: Westfield, United States
As titled. Fits 10ft Baker Monitor L mills. Nice condition as shown.
$
29.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
145.00
Buy It Now
$40.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
25.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Westfield, United States
As titled. New unused condition. USA made. Your bid is for ONE unit.but you can buy as many as you need. Part number AC-6 Long Bushing. Save 30% Don't ... morepay list of 23.50 for this part or any other when you can buy it for less. See our other auctions for Monitor items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13e6352e241-0xf4-
$
155.00
Buy It Now
$50.00 Shipping
Condition: New
Location: Westfield, United States
This listing is for an 8ft WC Vane Stem to fit Upright style vanes. Nice condition as show. Straight and solid w/o castings. VANE NOT INCLUDED but listed ... moreseperately. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
12.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Westfield, United States
As titled. Usable with any windmill pump set up using a flat bar. Pin holes show no wear as pictured.
$
53.00
Buy It Now
$23.00 Shipping
Condition: New
Location: Westfield, United States
One or more. Spokes for 8ft Monitor E, K, C or WC mills.
$
40.00
Buy It Now
$15.00 Shipping
Condition: New
Location: Westfield, United States
As titled. NOS condition. No breaks or repairs. Made in the USA. Part WC-79A shown at left. Don't pay list of $32.30 for this part or any other when ... moreyou can buy it for less. See our other auctions for WB& WC items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e6352e2f2-0x101-
$
40.00
Buy It Now
$40.00 Shipping
Condition: Used
Location: Westfield, United States
As titled. Fits 10ft Baker Monitor L mills. Nice condition as shown. Good galvanize & bolt holes. STEM is the only thing included.
$
15.00
Buy It Now
$29.90 Shipping
Condition: Used
Location: Westfield, United States
As titled. Fits 10ft Baker Monitor L mills. Nice condition as shown. Good threads at both ends.
$
75.00
Buy It Now
$22.00 Shipping
Condition: New
Location: Westfield, United States
As titled. NOS condition. No breaks or repairs. Made in the USA. Part WD-79A asshown.
$
7.99
Buy It Now
$4.50 Shipping
Condition: New
Location: Westfield, United States
The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. You are bidding on black and white photo copies of an early Monitor windmill tower descriptive bulletin published in 1936 for model No. O. No. 1, No. 2& No. 3 towers. These are the most common style Baker tower found afield today as it was produced until the company discontiued windmill production in the 1950's. You are not bidding on my originals. 9-8 1/2" X 11" pages in all. Can be used as an assembly guide as it includes detailed drawings and measurement data for everything from corner post spread to anchor post length& mounting base sizes. A must for those restoring any brand windmill using this style tower. Covers 21' 8" 28' 4" 35' 41' 8" 48' 4" 55' 61' 8" 75' towers. No hole punched binding or laminate to raise the price unreasonably. Not a CD format that won't allow you to print the information and forces you to only read it while on your computer. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling
$
250.00
Buy It Now
$42.00 Shipping
Condition: New
Location: Westfield, United States
It will fit your 6.5ft or 8ft WB, AC or WC long mast model mills. Made to allow you to drill the 4 mounting holes for your storm stay at the location ... moreyou choose. This allow you to vary the angle of incline to fit your existing tower.
$
24.99
Buy It Now
$12.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 6.5ft Baker Monitor WB mills. No breaks or repairs. Sold asnew in excellent usable condition.
$
185.00
Buy It Now
$55.00 Shipping
Condition: New
Location: Westfield, United States
As titled. A stem(only) for an 8ft Hambone model C. Good used condition. Solid with a small repair at the rear girt. Good tail pin holes. Call us at 940 ... more597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
175.00
Buy It Now
$45.00 Shipping
Condition: New
Location: Westfield, United States
Custom made early style WB Vane, new, unlogo'd.
$
10.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Westfield, United States
As titled. Usable with any windmill pump set up using a flat bar. Pin holes show wear as pictured.
$
175.00
Buy It Now
$55.00 Shipping
Condition: New
Location: Westfield, United States
As titled. New unused condition. No breaks or repairs. This part is not interchangable with a hinge pin on a WC. Don't pay list of $15.20 for this ... morepart or any other when you can buy it for less. See our other auctions for WB& WC items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13eb239e49b-0xfa-
$
44.00
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
47.00
Buy It Now
$7.00 Shipping
Condition: Used
Location: Westfield, United States
A new recast with perfect interior bearing groove. Balls included.
$
7.99
Buy It Now
$1.50 Shipping
Condition: New
Location: Westfield, United States
The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD or use an internet download that may contain a computer or phishing virus. See our" About Me" page. This auction is for black and white copies of Monitor& Chandler windmil pump diagrams as shown in the 1937 Baker Mfg Co. trade Price Guide. You are not buying our originals. 11- 8 1/2" X 11" pages. Covers 18 Monitor models including well cylinders& pipe dogs plus 12 models made by Chandler. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer
$
54.00
Buy It Now
$11.00 Shipping
Condition: New
Location: Westfield, United States
A new recast with perfect interior bearing groove.
$
49.00
Buy It Now
$12.00 Shipping
Condition: New
Location: Chicago, United States
Don't be fooled by Justin's claims of knowledge or quality or that he is the leading source of anything windmill related. Justin is only a "factory" in ... morehis own mind. Windmill Pump Quick Disconnect by Baker.
$
48.00
Buy It Now
$24.00 Shipping
Condition: Used
Location: Westfield, United States
As titled. Fits 8ft Baker Monitor model K& L mills. Freshly made in the U.S.A. This is a cast version as used early on model K's& L's. ... moreIt was later replaced by a stamped version. Don't pay dealer list of when you can have it for far less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
31.00
Buy It Now
$9.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 8ft Baker Monitor model K& E mills. Solid in all regards. Perfectly shaped holes. Call us at 940 597-7735 with your questions about ... morethis item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
40.00
Buy It Now
$21.00 Shipping
Condition: Used
Location: Westfield, United States
As titled. Fits 6.5ft Baker Monitor Hambone model B mills. Freshly made in the U.S.A. w/ chain. Don't pay dealer list of when you can have it for ... morefar less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
39.99
Buy It Now
$15.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 6.5ft Baker Monitor model B Hambone mills. Freshly made in the U.S.A. This is a cast version. Don't pay dealer list of when you can ... morehave it for far less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
85.00
Buy It Now
$29.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 6.5ft Baker Monitor Hambone model B mills. Freshly made in the U.S.A. w/ chain. Don't pay dealer list of when you can have it for ... morefar less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
19.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
29.00
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
34.99
Buy It Now
$9.00 Shipping
Condition: New
Location: Westfield, United States
Some Baker Monitor models had a race cup mounted to the tower truing center that countained ball bearings that the bottom of the mills mast pipe road ... moreon to ease its ability to turn with the wind. This listing is for ONE cup B5/WB5 with balls. Used on 6 1/2 Hambones and early long mast WB's Don't pay list price of over $70 for this part or any other when you can buy it for less. See our other auctions for WB& WC items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
52.00
Buy It Now
$24.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 8ft Baker Monitor model C Hambone mills. Freshly made in the U.S.A. This is a cast version as used early on model K's& L's. ... moreIt was later replaced by a stamped version. Don't pay dealer list of when you can have it for far less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
85.00
Buy It Now
$25.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 8ft Baker Monitor Hambone model C, AC or early WC mills. Freshly made in the U.S.A. w/ chain.
$
45.00
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Printing is black & white. Each is easily used by simply ... morecutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape.
$
29.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
85.00
Buy It Now
$29.00 Shipping
Condition: New
Location: Westfield, United States
As titled. Fits 8ft Baker Monitor K mills. Freshly made in the U.S.A. w/ chain.
$
36.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
34.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
34.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
29.99
Buy It Now
$16.00 Shipping
Condition: New
Location: Westfield, United States
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
1 2
 In 

Former Listings  
 
8ft Baker Monitor WC Windmill Vane Stem
This listing is for an 8ft WC Vane Stem to fit Upright style vanes. Nice condition as show. Straight and solid w/o castings. VANE NOT INCLUDED but listed seperately. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct ... morethe issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Baker Monitor Water Well Supplies Catalog
From a retired windmillers personal literature collection. An original catalog. Dated 1976-85. Includes numerous color pages on hand pumps. Tanks, jet pumps, pitless adapters and water supply accessories. A great collectable containing a large amount of information. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied ... moreplease contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. All of our literature items are watermarked to deter unauthorized reproduction and redistribution. While all information contained in those items remains legible. Those random Windmill-Parts.com logo watermarks likely make the item not suitable for framing.
6.5ft Baker Monitor Windmill Vane Hinge, upper, WB11, used
Upper vane hinge for a 6.5ft Baker Monitor WB. No breaks or repairs. WB 11 Don't pay list of $41.85 when you can have them for a fraction of the cost. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the ... moreissue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
8ft Baker Monitor Windmill Inner Wheel Band, 1 or more for 6 section wheel
Inner wheel band for any 8ft Baker Monitor using a 6 section wheel. Includes E. K, AC& Hambone models. No breaks or repairs. Your bid is for one. Don't pay list of $26.60 when you can have them for a fraction of the cost. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your ... moreitem you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Baker Monitor WE Windmill Govenor Spring
As titled and show. Spring for 12ft Monitor WE. Rust but solid and usable. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. ... moreWe mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Baker Monitor WE Windmill Vane Stem
As titled and show. Three piece vane stem for 12ft Monitor WE. Minor imperfections but solid and straight. VANE NOT INCLUDED. Ships as an oversize item given length. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct ... morethe issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Baker Monitor Windmill Pump Disconnet, A20
As titled. Rusty but usable. No breaks or repairs. Don't pay dealer list of when you can have it for far less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon ... morereceipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Baker Monitor Model K Windmill Pull-Out Swivel Slide, K18
As titled. Fits 8ft model K& 10ft Baker Monitor model L mills. Rusty but usable. Don't pay dealer list of when you can have it for far less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there ... moreis an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Baker Monitor Model K Windmill Lower Vane Hinge, K12
As titled. Fits 8ft model K. Rusty but usable. Good tail pin and latch holes. Part K12. Don't pay dealer list of when you can have it for far less. Save 10-50% on many other Monitor items including parts for WB& WC mills. Some even include Free shipping but this one does not. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there ... moreis an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
8ft Baker Monitor AC Windmill Tower Cap, AC1 for long mast AC & WC mills
As titled. PART AC1. Solid and usable. This is the loose fitting tower collar for long mast AC& WC mills. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction ... moreis complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
8ft Baker Monitor AC and WC Windmill Govenor Spring
As titled. This one came off an AC mill. Lots of life left. Use on either AC& WC mills. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. ... moreBy complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
8ft Baker Monitor AC & WC Windmill Storm Stay with Cup
As titled. This one came off an 8ft AC mill but is marked with WC part numbers WC2& WC5. Solid and usable. Includes a new set of balls. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. ... moreWe leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1440c0e7d90-0xfd-
Baker Monitor Windmill Regulator Part, Triangle w/mount bracket T97 & T96
As titled. Good usable condition. No breaks or repairs. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer ... morehas received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.