Buy It Now
Condition: Used Location: Fort Mill, United States MMK ZA6-8-04 8" HYDRAULIC 3-JAW CHUCK. (Non-Thru Hole). Includes Adaptor Plate. 5000 RPM Max. Champion Machinery, Inc.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Bore. Distance Between Centers. 30 / 25 HP AC. Chip Conveyor (Right Rear Exit). Installed in 2006. Machine Weight. 20" Manual 4-Jaw Chuck. 9" ... moreColor LCD.
Buy It Now
Condition: Used Location: Fort Mill, United States MMK ZA6-8-04 8" HYDRAULIC 3-JAW CHUCK. (Non-Thru Hole). 5000 RPM Max. Champion Machinery, Inc.
Buy It Now
Condition: Used Location: Fort Mill, United States Manufacture Date January 2019. 12000 RPM Cat 40 Big Plus Spindle. LNS Turbo Chip Conveyor (Hinge Type Right Side Exit). Spindle Speed. Cat 40 Big Plus. ... moreSpindle Chiller Unit. Renishaw TS-27R Tool Presetter.
Buy It Now
Condition: Used Location: Fort Mill, United States MMK ZA6-8-0 8" HYDRAULIC 3-JAW CHUCK. (Non-Thru Hole). Includes Adaptor Plate. 5000 RPM Max. Champion Machinery, Inc.
Buy It Now
Condition: Used Location: Fort Mill, United States Tools (Upper / Lower Turret). C-Axis Index (Main & Sub Spindle). Max Swing Over Bed. Spindle Bore. Sub Spindle Chuck. Spindle Motor. Spindle Speed. Sub ... moreSpindle Bore.
Buy It Now
Condition: Used Location: Portland, United States (Inv.37206). Electrically interlocked chip guard. 3/4 HP 220/440 3 Phase drive currently wired 440.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Conveyor (Left Side Exit). 40 - 10,000 RPM. Machine Weight. Spindle Speed. Ethernet Connection. Table Load Capacity. Coolant Wash Down System. Through ... moreSpindle Coolant.
Buy It Now
Condition: Used Location: Portland, United States Not What You Were Looking For?. Portland, CT. Column in. 010 Graduations. Wired 3 Phase, 60 Cycle, 230/460 Volts, 3420 RPM.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Bore. Distance Between Centers. Chip Conveyor (Right Rear Exit). 42" / 27" / 55". Yellow Operation Light. 35 / 30 HP. (8) Position Turret. Manual ... more3-Jaw Chuck on Rear of Spindle.
Buy It Now
Condition: Used Location: Fort Mill, United States (2) 8 Position Turrets. Loader Max Weight. Loader Rapid Traverse (X Y Z). Manufacture Date December 2015. GTH150 Gantry Loader with Dedicated L Hand (OP ... more10/10 or 10/20). Machine Weight. Three Color Tower Light.
Buy It Now
Condition: Used Location: Fort Mill, United States Chuck Size. Royal Quick Grip Collet Chuck for Sub Spindle. Royal Quick Grip 80 Collet Chucks for Main Spindle. Spindle Nose. Lathe Tool Index Function. ... moreSpindle Bore. Spindle Motor. Spindle Speed.
Buy It Now
$16.40 Shipping Condition: New Location: Lyons, United States The NotcHead™ Polishing Grip will grip almost any type of bolt or screw, from sizes #4 through #10 and 1/4" through 3/8". This hand-held NotcHead Polishing ... moreGrip™ is designed to quickly and easily grip almost any type of screw or bolt and provide a secure handle while you polish or grind.
Buy It Now
Condition: Used Location: Fort Mill, United States Tools (Upper Turret / Lower Turret). Turret Index (Single Step / Full). Twin Spindle Twin Turret Design. Y-Axis (Upper Turret). C-Axis Milling (Upper ... moreand Lower Turret). Sub Spindle Parts Ejector. Spindle Bore.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Nose. Chuck Size. Spindle Motor. Spindle Speed. Spindle Torque. Spindle Orientation. 12" Hydraulic Chuck. Machine Weight.
Buy It Now
Condition: Used Location: Fort Mill, United States FANUC LR MATE 200iD Robot. FANUC Robot Automation Cell. Bowl Feeder. Max Swing Over Bed. Robot Stand. Robot Cabling. Max Cutting Length. Max Bar Capacity.
Buy It Now
Condition: Used Location: Fort Mill, United States Speedgrip D-2003-S 4.000 080-13 EXPANDING Expandable COLLET CHUCK Speed Grip
Buy It Now
Condition: Used Location: Fort Mill, United States Speedgrip D-2003-S 4.000 080-13 EXPANDING Expandable COLLET CHUCK Speed Grip
Buy It Now
Condition: Used Location: Fort Mill, United States 8" Hydraulic Chucks on Left and Right Spindles. Spindle Bore (L & R). Spindle Motor (L & R). Spindle Nose (L & R). Y-Axis Live Tooling in Upper Turret. ... moreLive Tooling on Lower Turret. Spindle Speed (L & R).
Buy It Now
Condition: Used Location: Fort Mill, United States Tools (Upper / Lower Turret). C-Axis Index (Main & Sub Spindle). Max Swing Over Bed. Spindle Bore. Sub Spindle Chuck. Spindle Motor. Spindle Speed. Sub ... moreSpindle Bore.
Buy It Now
Condition: Used Location: Fort Mill, United States Chuck Size. Spindle Nose. Milling Spindle Motor. Milling Spindle Speed. Milling Spindle Torque. Spindle Motor. Spindle Speed. Spindle Taper.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Nose. Chuck Size. Spindle Bore. Spindle Motor. Spindle Speed. Spindle Torque. 7 - 2000 RPM. 12" Hydraulic Chuck.
Buy It Now
Condition: Used Location: Portland, United States Newtri Selfeeder Drill on Stand. thrust 150 lbs. (Inv.37598). Not What You Were Looking For?. spindle speed set at 5950 rpm. chucking capacity 1/8, 1/4.
Buy It Now
Condition: Used Location: Wallingford, United States Model #4862. BUCK 8" 6 Jaw Adjust Tru Lathe Chuck.
Buy It Now
Condition: Used Location: Sylvania, United States Emco Maximat Miller.. Emco Maximat V10-P. Emco Maximat Super 11. Emco Maximat V8. Emco Maximat Super 11CD. Emco Maximat FB-2. This is by far the largest ... moregroup of Emco lathe owners in the world.
Buy It Now
Condition: Used Location: Sylvania, United States Emco Maximat Miller.. Emco Maximat V8. Emco Maximat V10-P. Emco Maximat Super 11. Emco Maximat Super 11CD. Emco Maximat FB-2. This is by far the largest ... moregroup of Emco lathe owners in the world.
Buy It Now
Condition: Used Location: Sylvania, United States Includes hardware to attach stand to base. Emco Maximat V8. Emco Maximat V10-P. Emco Maximat Super 11. Emco Maximat Super 11CD. Emco Maximat FB-2. Emco ... moreMaximat Miller.. "Emco FB2 Mill".
Buy It Now
Condition: Used Location: Fremont, United States HwaCheon CUTEX-160 with a 6" chuck. 22" swing, live tooling on all stations, twelve station turret, uses 1" stick tools. In excellent condition. ... moreNew paint, comes with tooling blocks. Looks and runs as good as new holds size excellent. Buyer is responsible for rigging and shipping.
Buy It Now
$14.86 Shipping Condition: Used Location: Bay Shore, United States Minimum Collet Capacity: 0.0790. Maximum Collet Capacity: 0.314.
Buy It Now
Condition: Used Location: Los Angeles, United States 6" x 12" Used Harig Surface Grinder, Mdl. 612, Manual Magnetic Chuck, #P1029. We also carry a wide variety of tooling at competitive prices. It might ... morebe cheaper than you think! LOCAL PICKUP IS FREE, LOADING ONTO A FLATBED OPEN TRUCK OR BOX VAN.
Buy It Now
Condition: Used Location: Los Angeles, United States LOCAL PICKUP IS FREE, LOADING ONTO A FLATBED OPEN TRUCK OR BOX VAN. NO CONTAINERS! We also carry a wide variety of tooling at competitive prices. Table ... moreSize6" X 12". It might be cheaper than you think!
Buy It Now
Condition: Used Location: Ann Arbor, United States "Emco FB2 Mill". Emco Unimat 3. Emco Compact 5 (or Sears Craftsman). Emco Compact 5 Unimill. Emco Compact 8 (or Sears Craftsman). Emco Compact 10. Emco ... moreMaximat V8. Emco Maximat V10-P.
Buy It Now
Condition: Used Location: Sylvania, United States Emco Maximat Miller.. Emco Maximat V10-P. Emco Maximat Super 11. Emco Maximat V8. Emco Maximat Super 11CD. Emco Maximat FB-2. This is by far the largest ... moregroup of Emco lathe owners in the world.
Buy It Now
Condition: Used Location: Byron Center, United States Tool Presetter. 2006 Hyundai-Kia SKT-25 CNC Turning Center. 19.7" Max. Turning Dia. 28.3" Max. Turning Length. 24.4" Swing on the Bed. 12 Station Turret.
Buy It Now
Condition: Used Location: Preston, United States 1 1/4" CITIZEN, No. E-32, MITSUBISHI, 6-AXIS, LIVE TOOLING CAPABILITY, SUB SPINDLE, TOOLING, LNS 6.35 BAR FEEDER, NEW 1990 Our stock number: 1861 ... moreClick on picture below for larger version C& A Machinery. Incorporated 700 PLEASANT STREET. NORWOOD MA 02062 PHONE# 781-440-0983 FAX# 781-769-9486 E-MAIL SPECIFICATION SHEET CITIZEN CNC SWISS TYPE SCREW MACHINE MODEL E-32 S/N W5184 NEW 1990 STOCK# 1861 No. of controlled axes: 6(X1. X2, Z1, Z2, Z3 C1) Simultaneous six axis control: Cincom System II Maximum machining diameter: 1.26" Maximum machining length: 12.6" Maximum drilling/tap& die diameter: 625" 1/2" Spindle speed: 130-6000 rpm Rotary tools: maximum drilling/ threading diameter: 393" 5/16" spindle speed: 225-4460 rpm Back-work: maximum chucking diameter of back-work spindle: 1.26" maximum back-work length: 12.5" maximum drilling/ threading diameter: 5" 1/2" back-work spindle speed: 150-5000 rpm No. of tools installable: 20 No. of turret indexes: 10 x 2 per turret Tool size: 3/4 x 3/4 x 3.5 Rapid traverse rate: x1.X2/z1,z3/c axes: 472"630"167 ipm Main spindle motor drive: 7.5 hp Power supply: 15 kva Dimensions(approx. 61"x 120" x 65"h Weight(approx. 8800 lbs. MACHINE EQUIPPED WITH: MITSUBISHI CONTROL LIVE TOOLING CAPABILITY SUB SPINDLE MIST COLLECTOR MISC. TOOLING HIGH PREASSURE LUBRICATION COOLBLASTER HD HIGH PREASSURE COOLANT LNS 6.35- HS- 5.2 BAR FEED 32 MM CAPACITY FOB NORWOOD. MA*TEMPORARY SPECIFICATION. SUBJECT TO CHANGE* NOTE THERE IS A LOADING CHARGE FOR THIS ITEM PLEASE CALL 781-440-0986" NOTE WE WILL SHIP THIS ITEM"
Buy It Now
Condition: Used Location: Holmesville, United States NewBritain Model 865, 8 Spindle Hydraulic Chucker. -Machine runs well. All of the hydraulics work. Double indexallows for two parts to be machined at ... moreonce. A couple of the chucks may need rebuilt.
Buy It Now
Condition: Used Location: Aurora, United States ONE USED - 8" x 18" CLAUSING Hand Feed Surface Grinder, New 2011.
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Condition: Used Location: Mansfield, United States TABLE WORK SURFACE. 12" X 39". WHEEL SIZE. 12" X 2" X 5" (HUB SIZE). WEIGHT: 5,500#. MAG CHUCK SIZE. 12" X 24" X 3-3/4". OVERALL SIZE: 54" F-B x 94" L-R ... morex 6'6" H. EQUIPPED WITH.
Buy It Now
Condition: Used Location: Mansfield, United States | S/N 1321581 | Mdl# 15-07. DELTA DRILL PRESS.
Buy It Now
Condition: Used Location: Escondido, United States Kondia Powermill vertical knee milling machine. Hardly Used In EXCELLENT SHAPE! I took the whole mill apart to inspect, clean, paint and replace old grease ... morein the head. Located in Escondido, CA. Local pickup only.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Turning Length: 39.8". Catalogue Specifications Swing Over Bed: 25.9". Chuck Air Blow for Sub Spindle. X-Axis Travel X1, X2, X3: 24.21". Z-Axis Travel ... moreZ1, Z2, Z3: 62.4". Y-Axis Travel Y1, Y2, Y3: 9.84".
Buy It Now
Condition: Used Location: Elk Grove Village, United States Mazak Monitoring System B (RMP60). Turning Length: 39.8". Catalogue Specifications Swing Over Bed: 25.9". B-Axis Travel: 240°. X-Axis Travel: 24.21". ... moreZ-Axis Travel: 42.4". Y-Axis Travel: 10.24". W-Axis Travel: 40.4".
Buy It Now
Condition: Used Location: Elk Grove Village, United States Turning Length: 39.8". Catalogue Specifications Swing Over Bed: 25.9". Chuck Air Blow for Sub Spindle. X-Axis Travel X1, X2, X3: 24.21". Z-Axis Travel ... moreZ1, Z2, Z3: 62.4". Y-Axis Travel Y1, Y2, Y3: 9.84".
Buy It Now
Condition: Used Location: Warren, United States Greatest Swing Inside Water Pan: 16". Work Table Tilt, Concave: 12 Degree. WEIGHT: 3,600 Lbs. 230 Volt Magnetic Chuck. 1/4 HP Coolant. MOTOR DATA: 7-1/2 ... moreHP Wheel.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications OKUMA MULTUS B300-W 5-AXIS CNC TURNING CENTER. Preliminary Specifications Subject to Verification. All machine sales are subject ... moreto machine availabilty.
Buy It Now
Condition: Used Location: Holmesville, United States NewBritain Model 865, 8 Spindle Hydraulic Chucker. -Machine runs well. All of the hydraulics work. Double indexallows for two parts to be machined at ... moreonce. A couple of the chucks may need rebuilt.
Buy It Now
Condition: Used Location: Puyallup, United States Specifications: ---Make: Monarch ---Model: EE ---Type: Lathe Capacity: ---Swing: 12.5" ---Distance Between Centers: 20" ---Thru Spindle Hole: 13/32" ---Cross ... moreSlide Travel: 8" ---Spindle Speed: 40-2500 RPM Equipped With: ---Newall DRO ---Tailstock ---3 Jaw Chuck ---4 Jaw Chuck ---Steady Rest ---Faceplate.
Buy It Now
Condition: Used Location: Holdingford, United States LeBlond Makino 15" x 30" Regal Servo Shift Lathe Model Regal. S# 12C-1563, Date Mfg. 12/81, 15.5" Swing, 9.5" Over carriage, 30" ... moreBetween centers, 7-7/8" Cross slide travel, 3-7/8" Compuond travel, 12 Spindle speeds from 45 to 1,800 rpm, 2" Thru hole, 8.25" 3 Jaw Cushman chuck, Camlock D1-6 series chuck mount, Flip down safety shield, In/mm Threading, Thread dial on carriage, Taper attachment, Electric spindle brake, Spindle control roll lever on right side of apron, In/mm on tailstock w/6" spindle travel, No. 4 morse taper, Cross offset adjustment, Oil cup lube system, Removable bed ways, 12"W x 20"L x 8"H Coolant tank& 1/10hp pump, Rear splash guard, Slide out chip catch pan, 7.5hp 230v 3ph 60cyc, Overall Dim. 6' 4"L x 42"W x 54"H, Est. Wt. 2,800 lbs. Cleaned& painted. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
Buy It Now
Condition: Used Location: Alto, United States Asset #7392. Hydraulic Pump motor – HP 3. Hydraulic tank capacity 23.5 Gal. Continuous Cross Speed – maximum per minute 120. Floor Space 195 x 104”. Chuck ... moreSize 12 x 40” Maximum Grinding width 15”. Work surface 14 x 37”.
Buy It Now
Condition: Used Location: Vista, United States Manufacturer: Sterling (1983). Condition: Used.
Buy It Now
Condition: Used Location: Chicago, United States (1) Used 17”/25” x 80” TOS-TRENCHIN Gap-Bed Engine Lathe. Swing Over 9-1/16” Gap... 25-19/32”. Spindle Speeds... (24) 22 – 2000 RPM.
Buy It Now
Condition: Used Location: Lithia, United States Note: Photos shown are for reference use only. CNC Machines. Swing over bed 31.49”. Swing over Carriage 27.55”. Spindle Power 30 HP Direct Drive. General ... moreInterest. All Price, Location and Specifications Subject to Change without Notice .
Buy It Now
Condition: Used Location: Alto, United States Asset #1812. Hydraulic pump motor 1-1/2 hp. Height floor to work surface 39". Approximate floor space 87" x 110". Spindle drive motor (1985 rpm) 3 hp. ... moreMachine is equipped with automatic Bijur lubrication system and 8" x 24" electro-magnetic chuck.
Buy It Now
Condition: Used Location: Fremont, United States WILTON RADIAL ARM DRILL PRESS 25 PR . SPINDLE TO COLUMN 8 1/4 - 30 5/16 IN. HEAD ON THE COLUMN. POWER FEED PER RPM. 002.0032.0047.0067.0098.0138. JACOBS ... moreDRILL CHUCK DIA : 1/8-5/8. TRAVEL OF ARM( VERTICAL) 23 ¼ IN.
Buy It Now
Condition: Used Location: Cincinnati, United States 14-15 BARBER COLMAN HORIZONTAL HEAVY DUTY GEAR HOBBING MACHINE. Model 14-15, S/N 942, New 1963. Max Pitch in Steel 3.5 DP. Main Drive Horsepower 10 HP. ... moreApproximate Machine Height 90". Max Travel of Hob Slide 15".
Buy It Now
Condition: Used Location: Elk Grove Village, United States Spindle Speed: 3,500 RPM. Spindle Power: 40 hp. Spindle Nose: JIS A2-11. Preliminary Specifications Subject to Verification. All machine sales are subject ... moreto machine availabilty. Inventory #: 44706.
Buy It Now
Condition: Used Location: Grand Rapids, United States Machine is equipped with Newall Sapphire 2-Axis DRO, X-Axis Powerfeed, Hardened and Ground Box Type Ways, AC Variable Frequency Drive, 6" Machine Vise, ... moreCollet Set, JAcobs Drill Chucks, Work Light, Lube System.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Spindle Speed: 3,500 RPM. Spindle Power: 40 hp. Spindle Nose: JIS A2-11. Preliminary Specifications Subject to Verification. All machine sales are subject ... moreto machine availabilty. Turrets: 8-Position.
Buy It Now
Condition: Used Location: Clermont, United States Very nice 24" gear head drill, 3 phase 230v 120-2880rpm. chuck and crank handle included fits both the head and table gear racks. ASK for full res photos, ... morevideo of operational testing, etc. photos may have distortion, are for general scale only.
|