Buy It Now
Condition: Used Location: Fort Mill, United States MMK ZA6-8-04 8" HYDRAULIC 3-JAW CHUCK. (Non-Thru Hole). 5000 RPM Max. Champion Machinery, Inc.
Buy It Now
Condition: Used Location: Toledo, United States
Buy It Now
Condition: Used Location: Toledo, United States SWING OVER BED.: 20". DISTANCE BETWEEN CENTERS.: 120". SWING IN GAP..: 28". SPINDLE SPEEDS.: (10) 70-1500. THRU HOLE..: 4".
Buy It Now
Condition: Used Location: Fort Mill, United States Max Swing Over Bed / Carriage. Mfg Date October 2019. Spindle Bore. Turret Index (Single Step / Full). Machine Weight. Samchully STA-3.2DSN Programmable ... moreHydraulic Steady Rest. Slant Bed Box Way Construction.
Buy It Now
Condition: Used Location: Toledo, United States SWING OVER SLIDE.. SWING OVER BED.: 20". DISTANCE BETWEEN CENTERS..: 54". SPINDLE SPEEDS.: (18)60-1580.
Buy It Now
Condition: Used Location: Toledo, United States SWING OVER BED.. THREADS..: (66) 2 TO 120 TPI. SWING OVER CROSS SLIDE.: 15". MOTOR..: 20 HP. SPINDLE SPEEDS..
Buy It Now
Condition: Used Location: Toledo, United States SWING OVER BED.: 20". DISTANCE BETWEEN CENTERS.: 120". SWING IN GAP..: 28". SPINDLE SPEEDS.: (10) 70-1500. 3 JAW CHUCK..
Buy It Now
Condition: Used Location: Fort Mill, United States Manufacture Date January 2019. 12000 RPM Cat 40 Big Plus Spindle. LNS Turbo Chip Conveyor (Hinge Type Right Side Exit). Spindle Speed. Cat 40 Big Plus. ... moreSpindle Chiller Unit. Renishaw TS-27R Tool Presetter.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Bore. Distance Between Centers. Chip Conveyor (Right Rear Exit). 42" / 27" / 55". Yellow Operation Light. 35 / 30 HP. (8) Position Turret. Manual ... more3-Jaw Chuck on Rear of Spindle.
Buy It Now
$6.80 Shipping Condition: New – Open box Location: Charlotte, United States
Buy It Now
Condition: Used Location: Toledo, United States MODEL. .: SU100. SWING OVER BED. BORING BAR TOOL HOLDERS. SPINDLE SPEEDS. : (27) 2.8 TO 450 RPM. ENGLISH THREADING.: 1 TO 28 TPI. CHUCK..: 24" 3 JAW.
Buy It Now
Condition: Used Location: Fort Mill, United States HAAS Servo 300 Short Magazine Barfeed. Max Swing Over Bed / Carriage. C-Axis Live Tooling Capability. C-Axis Index. Auto Parts Catcher. (3) Boring Bar ... moreHolders (0.75" ID). (2) Boring Bar Holders (1" ID).
Buy It Now
Condition: Used Location: Fort Mill, United States Chuck Size. Spindle Nose. Milling Spindle Motor. Milling Spindle Speed. Milling Spindle Torque. Spindle Motor. Spindle Speed. Spindle Taper.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Conveyor (Left Side Exit). 40 - 10,000 RPM. Machine Weight. Spindle Speed. Ethernet Connection. Table Load Capacity. Coolant Wash Down System. Through ... moreSpindle Coolant.
Buy It Now
Condition: Used Location: Toledo, United States 2 AXIS FAGOR DRO.. SWING OVER BED..: 36". DISTANCE BETWEEN CENTERS.: 120". SPINDLE SPEEDS..: (16) 30 - 1400 RPM. CHUCK..: 12" 4 JAW.
Buy It Now
Condition: Used Location: Fort Mill, United States 0.28" Stroke Per Jaw. 5.51" Through Hole. 21 L Air Consumption/Jaw Stroke @ 6 Bar. (2) Air Chucks Included.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Hardened steel jaws have powerful force to curve and angle any mild steel to 18 gauge, aluminum to 1. Great for auto body trim work, and door panel edging.
Buy It Now
Condition: Used Location: Fort Mill, United States Max Swing Over Carriage. C-Axis Index (Main & Sub Spindle). Chuck Size. Spindle Nose. Main Spindle Collet Chuck FB10-32A-SH S-30. Spindle Bore. Spindle ... moreMotor. Spindle Speed.
Buy It Now
$18.23 Shipping Condition: New Location: Canada Brand new Posted with
Buy It Now
Condition: Used Location: Sicklerville, United States Thread Dial.
Buy It Now
Condition: Used Location: Sicklerville, United States Thread Dial. 5-C Lever Type Collet Closer & Collets.
Buy It Now
Condition: Used Location: Medina, United States Before I start the lathe has a coating of cosmoline on it so it looks rusty in pics but it's just the protective covering and is really nice under it. ... moreI'm not going to clean this machine at all,I don't want to remove anymore of the cosmoline off of it but I think this machine is going to clean up really nice.
Buy It Now
Condition: Used Location: Sicklerville, United States 15" 4 Jaw Chuck 2 3/8 X 6 Thread Back & Key.
Buy It Now
Condition: Used Location: Sicklerville, United States Clausing Colchester 13" X 36" Toolroom Lathe. Can Be Inspected Under Power. Nice Condition.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Spindle Mount: A2-20. All machine sales are subject to machine availabilty.
Buy It Now
Condition: Used Location: Casa Grande, United States SWING IN GAP. . 26". SPINDLE SPEED RANGE (15). 19 - 2400 RPM. - POWER RAPID TRAVERSE. - 12" 3-JAW CHUCK. - 10 HP MAIN MOTOR. - STEADY REST. - TRAV-A-DIAL ... moreFOR LONGITUDINAL CARRIAGE TRAVEL.
Buy It Now
Condition: Used Location: Sicklerville, United States LeBlond Regal 15 X 54" Lathe Serial #7C-2115. 12" Face Plate.
Buy It Now
Condition: Used Location: Elk Grove Village, United States 2004 Haas Model SL-10 CNC Turning Center Serial Number: 69013 Specifications: Chuck Size. 6.5" Bar Capacity. 1.75" Between Center. 16.5" ... moreMax Cutting Diameter. 10" Max Cutting Length. 14" Max Spindle Speed. 6000rpm Spindle Power. 15hp Travels. 6.25" x 14" Turret. 12 Station, Bolt On Style Machine Weight. 4000rpm Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or entire plants Please feel free to call or email us any questions at: Phone: 616-868-1111 Email: sales@vanderzielmachinery.com Vander Ziel Machinery Sales. Inc. 6325 Alden Nash, Alto, Michigan, 49302 Powered by The f
Buy It Now
Condition: Used Location: Fremont, United States HwaCheon CUTEX-160 with a 6" chuck. 22" swing, live tooling on all stations, twelve station turret, uses 1" stick tools. In excellent condition. ... moreNew paint, comes with tooling blocks. Looks and runs as good as new holds size excellent. Buyer is responsible for rigging and shipping.
Buy It Now
Condition: Used Location: Sicklerville, United States 15" 4 Jaw Chuck L-1 Back & Key.
Buy It Now
Condition: Used Location: Aurora, United States Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 15" Swg 54" cc LeBlond-Makino Regal ServoShift ENGINE LATHE. Inch/Metric,4 Jaw,S Ref# 153063 iammdna XLATHE 15" x 54" LEBLOND-MAKINO SERVO SHIFT ENGINE LATHE MODEL: 15" REGAL. S/N: 15C-296, NEW: 1989 SPECIFICATIONS: SWING OVER BED. 15-1/2" SWING OVER CROSS SLIDE. 9-1/2" DISTANCE BETWEEN CENTERS. 54" SPINDLE NOSE. D1-6" CAMLOCK. HOLE THRU SPINDLE. 2-17/64" SPINDLE SPEED RANGE(12) 45- 1800 RPM. LONGITUDINAL FEED RANGE(48) 0018" 104" IPR. CROSS FEEDS HALF THE VALUES OF LONGITUDINAL. THREADING RANGE ENGLISH(48) 2- 112 TPI. THREADING RANGE METRIC(40) 0.25- 14 mm. TAILSTOCK SPINDLE TRAVEL. 5" TAILSTOCK SPINDLE TAPER. 4 MT. APPROX WEIGHT. 3.300 LBS. APPROX DIMENSIONS. 104"L x 40"W x 51"H. EQUIPPED WITH: 10" 4-JAW PRATT BURNERD CHUCK. LEVER TYPE 5C-COLLET CLOSER. 7" CAPACITY STEADY REST. DRILL CHUCK& CENTER FOR TAILSTOCK. CENTER SLEEVE FOR HEADSTOCK. INCH/METRIC HANDWHEELS. MICROMETER CARRIAGE STOP. COOLANT SYSTEM WITH REMOVABLE CHIP PAN. HARD& GROUND REPLACEABLE BEDWAYS. MANUALS. WORKLIGHT. 7-1/2 HORSE POWER MAIN MOTOR INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More LeBlond-Makino Machines Click Here For More Toolroom Machines- ENGINE LA
Buy It Now
Condition: Used Location: Elk Grove Village, United States Parts Catcher. B-Axis Rotation: 225°. Catalogue Specifications Swing: 24.8". Preliminary Specifications Subject to Verification. All machine sales are ... moresubject to machine availabilty. Sub Spindle. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Holland, United States Hercules AJAX Mazak 18. Engine Lathe. 2010 Haas ST-30SS CNC Lathe Live Tooling 24 Station Turret 10 in Chuck 3 in Bar. 2006 Hyundai Kia SKT210SY CNC Lathe ... moreSub Spindle Y-Axis Chip Conveyor. 2005 Citizen L20 VIII CNC Swiss Lathe.
Buy It Now
Condition: Used Location: Holland, United States Machine-Tool MT280. Engine Lathe. Swing Over Cross 14". 2006 Hyundai Kia SKT210SY CNC Lathe Sub Spindle Y-Axis Chip Conveyor. 2010 Haas ST-30SS CNC Lathe ... moreLive Tooling 24 Station Turret 10 in Chuck 3 in Bar.
Buy It Now
Condition: Used Location: Holdingford, United States LeBlond Makino 15" x 30" Regal Servo Shift Lathe Model Regal. S# 12C-1563, Date Mfg. 12/81, 15.5" Swing, 9.5" Over carriage, 30" ... moreBetween centers, 7-7/8" Cross slide travel, 3-7/8" Compuond travel, 12 Spindle speeds from 45 to 1,800 rpm, 2" Thru hole, 8.25" 3 Jaw Cushman chuck, Camlock D1-6 series chuck mount, Flip down safety shield, In/mm Threading, Thread dial on carriage, Taper attachment, Electric spindle brake, Spindle control roll lever on right side of apron, In/mm on tailstock w/6" spindle travel, No. 4 morse taper, Cross offset adjustment, Oil cup lube system, Removable bed ways, 12"W x 20"L x 8"H Coolant tank& 1/10hp pump, Rear splash guard, Slide out chip catch pan, 7.5hp 230v 3ph 60cyc, Overall Dim. 6' 4"L x 42"W x 54"H, Est. Wt. 2,800 lbs. Cleaned& painted. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
Buy It Now
Condition: Used Location: Puyallup, United States Specifications: ---Make: Monarch ---Model: EE ---Type: Lathe Capacity: ---Swing: 12.5" ---Distance Between Centers: 20" ---Thru Spindle Hole: 13/32" ---Cross ... moreSlide Travel: 8" ---Spindle Speed: 40-2500 RPM Equipped With: ---Newall DRO ---Tailstock ---3 Jaw Chuck ---4 Jaw Chuck ---Steady Rest ---Faceplate.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Spindle Speed: 3,500 RPM. Spindle Power: 40 hp. Spindle Nose: JIS A2-11. Preliminary Specifications Subject to Verification. All machine sales are subject ... moreto machine availabilty. Inventory #: 44706.
Buy It Now
Condition: Used Location: Philadelphia, United States Reference #30189. Chuck Jaws (4) 11.5" x 4.375" x 6.75". 3" Jaw Travel. Approximate Jaw Travel. . Matched Set. EQUIPPED WITH Key Width. .
Buy It Now
Condition: Used Location: Elk Grove Village, United States Swing Over Gap: 33". Catalogue Specifications Swing Over Bed: 24". Bell Center. Unless specifically stated in writing by PMS, all freight carriers must ... moreuse flat bed truck only. Hole Thru Spindle: 3".
Buy It Now
Condition: Used Location: Elk Grove Village, United States Spindle Speed: 3,500 RPM. Spindle Power: 40 hp. Spindle Nose: JIS A2-11. Preliminary Specifications Subject to Verification. All machine sales are subject ... moreto machine availabilty. Turrets: 8-Position.
Buy It Now
Condition: Used Location: Milwaukee, United States Item#2468- Mazak 18 x 60 Hercules Ajax Gap Bed Lathe Equipped With: Tailstock w/ 4 Morris Taper Taper Attachment Jacobs Flex Collet Chuck w/ Collets Aloris ... moreTool. CXA16& CXA 2 Manuals Hardened& Ground Ways 2 16” Face Plates(2) Independent 4 Jaw Chucks: 12” 16” 3) 3 Jaw Chucks: 8.10,12” Steady Rest Chip pan Machine Specifications: Swing: 18” Swing in Gap: 24” Center Distance: 60” Spindle Hole 2.050 L1 Spindle Mount w/ 6 Morris Taper Cuts Inch. Metric, Module& Diametral threads Will cut 40 different inch threads from 2TPI– 56TPI 7 ½ HP Motor 220/440 3 Phase Currently running 220 Aloris type tool post(name not specified) Shipping Point: PA Price: $7.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
Buy It Now
Condition: Used Location: Warren, United States (2) Deburring Heads 6" 3-Jaw Chuck Worklight 110V Electrics.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications Maximum Swing: 31.7". X-Axis Travel: 22.64". Z-Axis Travel: 118". SMWSLU-4-ZS Powered Steady Rest 1.18" - 9.64" Cap. Spindle ... moreMotor: 50 HP. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Turning Length: 39.8". Catalogue Specifications Swing Over Bed: 25.9". Chuck Air Blow for Sub Spindle. X-Axis Travel X1, X2, X3: 24.21". Z-Axis Travel ... moreZ1, Z2, Z3: 62.4". Y-Axis Travel Y1, Y2, Y3: 9.84".
Buy It Now
Condition: Used Location: Elk Grove Village, United States Turning Length: 39.8". Catalogue Specifications Swing Over Bed: 25.9". Chuck Air Blow for Sub Spindle. X-Axis Travel X1, X2, X3: 24.21". Z-Axis Travel ... moreZ1, Z2, Z3: 62.4". Y-Axis Travel Y1, Y2, Y3: 9.84".
Buy It Now
Condition: Used Location: Wallingford, United States 23 GPM pump. We can load onto an open flatbed truck. 30” stroke. Larger than standard oil tank.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Pneumatic Lift Assist: Counter Rotation Assembly. 35.5" 3-Jaw Chuck w/ 17" Hole & Adapter Plate. 25" 3-Jaw Chuck w/ 11" Hole; Adapter Plate & Sleeve Insert. ... moreUnless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Alto, United States Asset # 15638. Column Tilt Hydraulic, 0-60 degrees Left & Right. Blade Cleaning Brush Standard Friction Drive. Feed Force 0-350 lbs. Machine Tavel Cast ... moreIron, 2 T-Slots. Capacity at 45 Degrees 20” x 17”.
Buy It Now
Condition: Used Location: Aurora, United States ONE USED -48” x 100” cc LeBLOND H.D. Engine Lathe. Spindle Speeds from 4.5 to 500 RPM. 3” Spindle Thru Hole. Model: 40” STANDARD Raised. 40” Swing Over ... moreCross Slide. 40 HP 220/440 Volt Electrics. 49” Swing Over Bedways.
Buy It Now
Condition: Used Location: Milwaukee, United States Marvel Vertical Bandsaw. MAX STROKE, ONE INDEX: 15”. Marvel Series : V10-A. COLUMN TILT (right): 7” x 10” @ 45 Degrees. ELECTRICAL: 460/3PH/ 60 - 3HP. ... moreCAPACITY: 10” x 10”. BLADE LENGTH: 12’. MAX VISE OPENING: 10”.
Buy It Now
Condition: Used Location: United States 50,000 LBS MITCHELL 3-DIE PUSH POINTER. POINT LENGTH - AUTOMATIC BY HYDRAULIC CYLINDER - (4) POSITION SELECTOR SWITCH. MANUFACTURER - MITCHELL. DIE HOLDER ... more- THREE HOLE ROTARY WITH 6.010" ROUND X 4 1/32" DEEP CAVITIES.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record# 2337(1) Used 40 Ton WEAN-UNITED ... moreExtrusion Stretcher Specifications: Capacity: Tension(stretching) Load.40 tons@ 2.000 psi(nominal) Tension(stretching) Distance.60 in. nominal) Return(pushing) Load. Workpiece Length.1 42 ft. max)nominal) Workpiece Diameter or Cross Section.6 1/2 in. max) Pass Line Height.34 1/2 in. Headstock Type.Hydraulic/ Non-Rotating Tension Cylinder Diameter.7 in. nominal) Tension Cylinder Rod Diameter.3 5/8 in. Track Length(total)58 ft. Track Sections(3)1@ 24 ft. 1@ 20 ft 1@ 14 ft. each) Track to Pass Line Height.9 in Track Height(from floor)25 in. Track Width(across top)20 1/8 in. Track Type.Fabricated Steel with Hardened Steel Rails(replaceable) Tailstock Guide System.Flanged Guide Wheels(4) Tailstock Locking System.Over-Riding Drop-Hook. Tailstock positioning increments.24 in(nominal) Tailstock Positioning System.Manual Jaw Width.5 in. Jaw Opening.6 in. max) Jaw Type.Tapered Wedge Jaw Actuation.Pneumatic Equipped With: Complete Electrical Controls with Operator's Control Station Complete Hydraulic System Overall Dim
Buy It Now
Condition: Used Location: Chicago, United States Model QT35N, S/N 97264, New 1992. (1) Used MAZAK “QuickTurn” 2-Axis CNC Lathe. 12-Position Turret. Motor... 40 HP 3/60. Maximum Swing.... 20”.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record# 1756(1) Used 100 Ton LOEWY Extrusion ... moreStretcher with Detwist Headstock Specifications: Capacity.120 Tons@ 6.000 P.S.I. Workpiece Length.110' Maximum) Rail Gage.45" Wheel Base.42" C-C. Dia. of Detwister Head.39" Jaw Opening.11" Max) 3" Min) Jaw Width.12" Jaw Mounting.6" Dovetail. Electrical Characteristics.240/480 VAC/ 3 Phase/ 60 Cycle Equipped With: 25 HP Oilgear Hydraulic System with Controls. Detwister Drive: 3 HP Reliance Gear Reduction with Controls Overall Dimensions.125' Long x 5' Wide x 6' High. Weight.48.000 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, str
Buy It Now
Condition: Used Location: Holland, United States TAPER/RECEDING DIE HEAD. MAXIMUM TAPERED THREAD LENGTH. 5". HARD BED WAYS. . We load for free. S hipping rates available! CHUCKS FRONT & REAR. 3 JAW.
Buy It Now
Condition: Used Location: Toledo, United States 33,000 Lb. MITCHELL Hydra-Push 2-Die Hydraulic Push Pointer (49560). Point Length: Automatic By (3) Position Selector Switch, Adjustable. Die Holder: ... more2-Hole Swing Type Rotary. AGE: 1978, Rebuilt in 1998 by Mitchel, New PLC & Hydraulic Pump 2017.
Buy It Now
Condition: Used Location: Alto, United States Asset #15745. Capacity at 3° Cant: 17.5” horizontal, 22” vertical (Column in forward cant position). Feed Range: 0 – 250 lbs. Marvel patent pending Quick ... moreChange Column is standard on all machines. Allows column to be set either upright or at a 3° forward cant.
Buy It Now
$20.00 Shipping Condition: New Location: Los Angeles, United States Application This metal shrinker stretcher is commonly used for machining additions when shaping or forming sheet metal. It is suitable for restoring cars, ... moremetal roofs, etc. Specification Color: Blue Material: Iron Model: SS-18FD Thickness: 1.2mm/18Ga Throat depth: 2.54cm/1inch Dimensions: 113*48*17cm/44.5*18.9*6.7inch Net weight: 24kg/53lbs Gross weight: 26kg/57lbs Package Included 1* SS-18FD Metal Shrinker Stretcher.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application This metal shrinker stretcher is commonly used for machining additions when shaping or forming sheet metal. It is suitable for restoring cars, ... moremetal roofs, etc. Specification Color: Blue Material: Iron Model: SS-18FD Thickness: 1.2mm/18Ga Throat depth: 2.54cm/1inch Dimensions: 113*48*17cm/44.5*18.9*6.7inch Net weight: 24kg/53lbs Gross weight: 26kg/57lbs Package Included 1* SS-18FD Metal Shrinker Stretcher.
Buy It Now
$20.00 Shipping Condition: New Location: Los Angeles, United States Application This metal shrinker stretcher is commonly used for machining additions when shaping or forming sheet metal. It is suitable for restoring cars, ... moremetal roofs, etc. Specification Color: Blue Material: Iron Model: SS-18FD Thickness: 1.2mm/18Ga Throat depth: 2.54cm/1inch Dimensions: 113*48*17cm/44.5*18.9*6.7inch Net weight: 24kg/53lbs Gross weight: 26kg/57lbs Package Included 1* SS-18FD Metal Shrinker Stretcher.
|