|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States OC32 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air OC 32 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 2202260271 NEW Air Oil Filter Compressor Screw IR GD Atlas Capco 220 226 0271 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$1100.00 Shipping Condition: New Location: Minneapolis, United States The GS rotary screw compressor is designed for a continuous duty operation. All units are fully enclosed with a cabinet for a low sound level. Separation ... moreSystem. Easy oil drain excess. Plate fin air cooled aluminum oil cooler which is cooled by a dedicated cooling fan.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 93522720 NEW Air Oil Filter Compressor IR GD Atlas Copco 9352 2720 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 93568236 NEW Air Oil Filter Compressor IR GD Atlas Copco 9356 8236 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 92118678 NEW Air Oil Filter Compressor IR GD Atlas Copco 9211 8678 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1432197aaa1-0xec-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 4006.5104.2 NEW Air Oil Filter Compressor IR GD Atlas Copco 400651042 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 48221000 Fini NEW Air Oil Filter Compressor IR GD Atlas Copco 48221000 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C 16012-215 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 300487 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 300 487 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 43552 NEW Air Oil Filter Compressor IR GD Atlas Copco 43 552 Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States OC16 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air OC 16 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1432197aa43-0xe8-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750558336 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 58 336 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750559016 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 59 016 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750558425 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 58 425 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 413 719 NEW Air Oil Filter Compressor IR GD Atlas Copco 413 719 Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 05500874 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 0550 0874 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 2914-5050 NEW Air Oil Filter 29145050 Compressor Screw IR GD Quincy Atlas Capco GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
|
|
|
|