Buy It Now
Condition: Used Location: Milwaukee, United States Two Gantry Legs 4 Cylinders YES. Capacity: Up to 450 Ton 1. Propane Power Unit. Max Lift Height with Dead Section: YES. Retracted Height.
Buy It Now
Condition: Used Location: Byron Center, United States 1996 Scotchman 12012-24M Hydraulic Ironworker. Standard Motor 5 HP/230/460/60/3. Strokes Per Minute, Heavy Material 25 SPM. The machine is being sold ... more"as-is, where-is" with no warranty. Inspections are highly encouraged.
Buy It Now
Condition: Used Location: Fontana, United States Knife Size: 1 x 4. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. Need to call us?. All machine sales ... moreare subject to machine availabilty. Main Motor: 40 hp.
Buy It Now
Condition: Used Location: Grand Rapids, United States Stroke 36". 12 ipm pressing. Capacity 250 Tons. Ram speeds 32 ipm advance. Motor 15 HP 220 /440V. Weight 18,000 lbs.
Buy It Now
Condition: Used Location: Alto, United States Asset # 15769. Brake, 12, 18, 24” 51 Ton. Punching Capacity 51 Tons, 1 1/32” in 5/8”. We are always looking to buy machinery 1 piece or entire plants. ... moreRectangular Notcher 2.5” x 4” x 3/8”. Purchasing Information.
Buy It Now
Condition: Used Location: Grand Rapids, United States Ram stroke 6". Main motor 2 hp. Reservoir capacity 12 gallons.
Buy It Now
Condition: Used Location: Hephzibah, United States CARVER LABORATORY STANDARD 12-TON BENCH TOP MANUAL PELLET PRESS WITH 4" ROUND PLATEN, TESTED, WORKS. ITEM AND CONDITION AS PICTURED. The international ... morestandard For more than 100 years Carver hydraulic presses have been the standard for laboratories around the world.
Buy It Now
Condition: Used Location: Grand Rapids, United States Stroke: 12". Capacity: 330 Tons. Bed Area: 120" LR x 60" FB. Shut Height: 30" (over bed). All information is to the best of our. Total Weight: 117,500 ... morelbs (approx.). Slide Area: 120" LR x 60" FB.
Buy It Now
Condition: Used Location: Grand Rapids, United States Pines Model 3T Vertical Tube Bender(1986) Specifications Model: 3T- M-64622, Bending Capacity: 1-1/4" O.D. x.065" Wall(Steel Tubing) Tube Size ... moreRange: up to 1-1/4" O.D. Centerline Radius: Permitting Bend to Max angle) 3-1/2" Maximum C.L.R. Minimum Work Diameter: 2" to 3" Maximum Bend Angle: 140 Degrees- w/Normal Tooling, With Special Tooling: 165 Degrees- w/Special Tooling, Operating Pressure: 2.000 PSI, Production Rate: up to 1500 Bends/Hour, Main Motor Drive: 20 HP, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Buy It Now
Condition: Used Location: Alto, United States Asset # 16104. With Special Blades, L at 90 Degrees 5” x 5” x 1/2”. Flat Shear Capacity 12” x 5/8”. Length of Blades 12”. Number of Strokes per Minute ... more25. Angle Station 100 Tons. We are always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Elkhart, United States KeySeater / Broaching Machine Assorted Broaching Bars & Guide Bushings. One(1) Used JTC/France 10 Ton Capacity Vertical. the Machinery Dealers National ... moreAssociation (MDNA). We have over 35,000 Sq Feet of Warehouse Space.
Buy It Now
Condition: Used Location: Solon, United States Catalogue Specifications Capacity: 7.5T. All machine sales are subject to machine availabilty. Need to call us?. 7 Ton Crucible.
Buy It Now
Condition: Used Location: Holland, United States 18″ THROAT DEPTH. 1″ x 4″ x 144″ BLADE SIZE. 32″ PASS LINE HEIGHT. 12′ MAXIMUM CUTTING LENGTH. APPROXIMATE WEIGHT: 17,000 LBS. EQUIPPED WITH 3/16″ MAXIMUM ... moreCAPACITY MILD STEEL. 36″ FRONT OPERATED BACK GAUGE.
Buy It Now
Condition: Used Location: Mansfield, United States 75 Ton MINSTER # PM3-75-42 HIGH SPEED PRESS. STROKE. 1.25". MOTOR. 30 HP, 230-460 VAC, 3 PH, 60 Hz, 1760 RPM. VAMCO TS6 ROLL FEED. TYPE. . HIGH SPEED ... morePRESS. VARI SPEED.
Buy It Now
Condition: Used Location: Brooklyn, United States CALDWELL 3000 LB VERTICL EYE COIL LIFTER. CALDWELL 6000 LB C HOOK 12 WIDE X 21. DIXON 7000 LB C HOOK 24 WIDE X 25 LONG. MODEL NO 82NC-3-20. MODEL NO H-7--24-15. ... moreMODEL NO 83-1.5-20. SERIAL # 06-78115-2.
Buy It Now
Condition: New Location: Cincinnati, United States Maximum Ram Stroke 6". Tonnage Capacity 10 TONS. Made in the USA ! Bed Area 7-1/4" x 22". We will help with trucking by using our nationwide network to ... moreget you the very best trucking rate. From Outside the US & Canada call (5137712111).
Buy It Now
Condition: Used Location: Perrysburg, United States Slug Width, Max.: 3-1/2". Stroke: 1-1/2". MOTOR DATA: 1 HP. Adjustable Base. Shut Height: 4" to 5". EQUIPPED WITH.
Buy It Now
Condition: Used Location: Toledo, United States Shut height 8" to bed. Bed 28 1/2" x 39". Air clutch & brake. Head 24 1/2" x 28 1/2".
Buy It Now
Condition: Used Location: United States Casa Grande, AZ.
Buy It Now
Condition: Used Location: United States 45 TON MINSTER MODEL OBI/SC FLYWHEEL PRESS. FLYWHEEL GEARING. PALM BUTTONS 6" L-R ROLL FEED. BED AREA. (L-R x F-B). 28" x 19". BOLSTER. (L-R x F-B). 28" ... morex 19" x 2" THICK. MOTOR: 5 HP, 208-220/440V, 3PH, 60/50CYC, 1170/970 RPM.
Buy It Now
Condition: Used Location: Alto, United States Asset # 12590. Pressing speed 2 ipm. We are always looking to buy machinery – 1 piece or entire plants. Capacity 75 tons. Width between table channels ... more8-1/4". Minimum ram to table 6". Maximum ram to table 36".
Buy It Now
Condition: Used Location: Holland, United States 36″ x 36″ x 5″ SLIDE BOLSTER. 36″ x 36″ x 5″ BED BOLSTER. 30″ FLOOR TO TOP OF BOLSTER. 500 TON FULL TONNAGE PRESSING. 100 TON LOW TONNAGE PRESSING. 24″ ... moreMAIN SLIDE STROKE (MAXIMUM). PRESSING FORCE MAIN SIDE.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2081(1) Used 60 Ton MINSTER#6 Open ... moreBack Inclinable Press; Single Back Geared; S/N 6-3553 Specifications: Capacity.60 Ton Stroke.4" Shut Height Over Bed(SDAU)14 1/2" Slide Adjustment.3" Bed Area.23 1/2" L-R x 21" F-B Flanged Slide Face Area.15" L-R x 11 1/2" F-B Opening In Bed.10 1/8" L-R x 8" D Throat Depth.8" Opening Through Back.15" W x 22 1/2" H Distance Bed To Floor.33 1/2" Speed.50 S.P.M. est. Motor.GE 5 HP Electrical Characteristics.220/440 VAC/ 3 Phase/ 60 Cycle. EQUIPPED WITH: Complete Electric Controls Minster Full Revolution Mechanical Clutch w/Air Actuating Mechanism. 5 HP AC Main Drive Motor. Approximate Overall Dimensions.52" W x 70" D x 106" H Approximate Weight.13.000 Lbs. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona an
Buy It Now
Condition: Used Location: Elkhart, United States Stroke - Ram Travel.. 0 - 12". Closed Height.. 6" ( Maximum Stroke). Speed - Pressing ( Estimated ).. 240 IPM. Integral Motor Driven Hydraulic Pump - ... moreOil Sight Gauge - Oil Reservoir - Pressure Gauge.
Buy It Now
Condition: Used Location: Vandalia, United States Size Circle: 42". Bodor 6000W Fiber Laser Cutter 5'x10' Enclosed CNC Machine w/Table +FREE Install. 4000W Fiber Laser Cutter 5'x10' Enclosed CNC Machine ... morew/Table + FREE Installation. 6000W Fiber Laser Cutter 5'x10' Enclosed CNC Machine w/Table + FREE Installation.
Buy It Now
Condition: Used Location: United States Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2905(1) Used 75-Ton HPM 4-Post Hydraulic ... morePress; S/N 41-240 Specifications: Capacity.75 Ton Bed Area.48" L-R x 29" F-B Slide Area. Distance Between Posts.29" L-R x 29" F-B Stroke.9" Daylight.25" Distance Floor to Bed. Tie Rod Diameter. Number of Ram Cylinders. Type of Ram Cylinders. Diameter of Ram Cylinders. Ram(Slide) Speeds: Pressing. Advance. Return. Hydraulic System: Manufacturer& Type. Power& Pressure. Fluid Capacity. Line or Gauge Pressure.2.300 lbs. Electrical Characteristics. Equipped With: Complete Electrical Controls Complete Hydraulic System w/ Reservoir/ Tank Overall Dimensions.48" W x 103" L x 44" H. F.O.B.Casa Grande. AZ. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engine
Buy It Now
Condition: Used Location: Alto, United States Asset # 15548. Distance Floor to Bed with Press Erect 35”. Stroke of Slide 4”. We are always looking to buy machinery 1 piece or entire plants. Capacity ... more70 Tons. Motor Required 5 HP. Slide Area Across Bolt Lugs 17” x 12”.
Buy It Now
Condition: Used Location: Elkhart, United States One(1) Used Geo. Open Back for Marking Long Bars or Special Feed Installation. Marking Capacity - 3 Lines: 1/4". Die Slide Stroke: 3/8" - 7". Full Hydraulic ... moreOperation. the Machinery Dealers National Association (MDNA).
Buy It Now
Condition: Used Location: Elkhart, United States One(1) Used LaPointe Model HP5 Horizontal Broaching Machine. Self Contained Hydraulics - Hydraulic Oil Reservoir - Pressure Gauge. New AC Motor & Hydraulic ... morePump Installed about 2010. the Machinery Dealers National Association (MDNA).
Buy It Now
Condition: Used Location: Perrysburg, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 3". Air Clutch & Brake. Lateral Adj of Machine on Base: 4".
Buy It Now
Condition: Used Location: Alto, United States Asset # 16221. Cincinnati 12’ x 230 Ton Auto Shape Hydraulic Press Brake with Auto Crowning, Model 230AS x10. Standard Stroke Length 10”. Tonnage in Low ... moreSpeed 230 Tons. We are always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Mansfield, United States MINSTER PULSAR STAMPING PRESS. CAPACITY. . 60 TON. LENGTH OF STROKE. MOTOR. 30 HP, 90 VOLTS. S.P.M. 1 - 1000. BOLSTER. . 36" X 23". 230/460 VOLT 3 PHASE.
Buy It Now
Condition: Used Location: Alto, United States Asset # 14361. Capacity – Pressing 75 Tons. Stroke 60”. Swing out Bolster 90 Degrees. Swing Down Bolster 10,000 lbs. Ram Speeds – Pressing 30 IPM. We ... moreare always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Elk Grove Village, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 8". Between Housings: 78". Overall Length: 96".
Buy It Now
Condition: Used Location: Marshfield, United States Factory Sample Video DURMA HAP 37200 HYDRAULIC PRESS BRAKE SPECIFICATIONS: MODEL: HAP 37200 YEAR: 2003 SPECIFICATIONS: TONNAGE: 220 Tons MAXIMUM LENGTH ... moreOF BED AND RAM 12’ DISTANCE BETWEEN UPRIGHTS 10’ 2” STROKE OF RAM. 7.28 RAM SPEEDS APPROACH. 3.93 INCH/SEC BEND.28 INCH/SEC RETURN. 2.87 INCH/SEC THROAT DEPTH 15” MAIN MOTOR. 15 KW DIMENSIONS 150 X 94 X 112 WEIGHT. 30.000 EQUIPPED WITH: DURMA LC SERIES 2 AXIS CNC CONTROL 2 AXIS CNC BACKGAUGE MANUAL CROWNING REAR GUARDING FOOTSWITCH AND PALM BUTTON STATION TOOLING: 4-WAY BOTTOM DIE HOLDER& UPPER PUNCH PICTURED INCLUDED FLUSH FLOOR DESIGN For More Information or to Inspect Please Call Maury Cohn 1 800 888 4312 Sample Video Machine doesn't have front supports.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1441ebbd697-0xf7-
Buy It Now
Condition: Used Location: Grand Rapids, United States Capacity: 440 US Tons (400 KN) at 0.25". Stroke: 12". Slide Area: 108.62" x 55". Bed Area: 108.26" x 55". All information is to the best of our. Speed: ... more25 to 60 SPM. Total Weight: 97 Tons. Overall Height: 257.87".
Buy It Now
Condition: Used Location: Milwaukee, United States (1)Pre Owned 115 Ton Gasparini PBS105-3000 CNC Hydraulic Press Brake. Tonnage Capacity: 115 US Tons. Stroke: 7.9". pedestal palm station / Electric Foot ... moreSwitch. Main Motor Horsepower 15 480/3/60. high speed servo hydraulic system.
Buy It Now
Condition: Used Location: Mansfield, United States Stroke of slide. 1". Bed area (l-r) x (f-b).. 26-1/2" x 14-3/4". Ram area (l-r) x (f-b).. Air Clutch. Air Counterbalance. Flywheel Type.
Buy It Now
Condition: Used Location: Toledo, United States 9" H x 2.75" Flange "Zee Purlin" Tooling: 12 Ga. - 16 Ga. 6.5" H x 2.5" Flange "Zee Purlin" Tooling Bradbury RS4-25-5 Powered Straightener. Bradbury 420-36 ... morePowered Uncoiler w/ Coil Car. Catalogue SpecificationsBradbury D3-30-12 Roll Forming Line Specifications.
Buy It Now
Condition: Used Location: Delta, United States 18 Ton Tishken Tilt Type Cut-Off Press. Stroke 1 1/2". Bed 12" x 11".
Buy It Now
Condition: Used Location: Mansfield, United States CAPACITY. . 100 TON. HYDRAULIC PUMP UNIT: 43" L x 24" W x 44" H. MOTOR: 20 HP, 575V, 3PH, 60CYC, 1770 RPM. TABLE HAS SINGLE ROLLS ON EACH END. EQUIPPED ... moreWITH: 6 FOOT LONG TABLE MOUNTED ON BED.
Buy It Now
Condition: Used Location: Holland, United States 90 STROKES PER MINUTE. 15″ SHUT HEIGHT. PALM BUTTONS. 30″ x 15-1/2″ RAM AREA. MODEL: 180 ST. AIR CLUTCH & BRAKE. AIR COUNTERBALANCE. 50″ x 28-1/2″ BED ... moreAREA.
Buy It Now
Condition: Used Location: Grand Rapids, United States Bliss High Speed Press Model HP2-75-60-30 Capacity 75 Tons Stroke 3" Adjustment 3" Bed Area 60" x 30" Shut Height 24" to bed ... moreSpeed 60 to 180 SPM Equipped with: Air Clutch and Brake. Wintress Die Protection and Analyzer, New bolster plate and sub plate, cleaned and painted sold in as is condition. FOB Delton Michigan 49046, machines are being marketed outside of Ebay and subject to prior sale, any Crating/Palletizing will be additional cost to the buyer Posted with
Buy It Now
Condition: Used Location: United States (1) Used 25 Ton x 120"/180" Lapointe Model 50-120 S.R.H.E. Horizontal Surface Broaching Machine; S/N 55065. Record # 3539. Stroke..120"/180" (optional). ... moreWe also specialize in all types of saws – extended height vertical band/plate saws, horizontal band type, power hack, and many types of custom table/feed sawing systems.
Buy It Now
Condition: Used Location: Alto, United States Asset # 13137. Ram Speed Pressing 7 IPM. We are always looking to buy machinery ?. 1 piece or entire plants. End of Table Center Line Ram 11”. Table Height ... more24”. Table Width 30”. Motor 2 HP/1800 RPM.
Buy It Now
Condition: Used Location: Mansfield, United States 75 TON GREENERD MODEL #H-75-42R17 HYDRAULIC PRESS. CAPACITY.. 75 TON. PRESSING.. 44 IPM. 4" DRAW.. PALM BUTTONS AND FOOT PEDAL.
Buy It Now
Condition: New Location: Lithia, United States General Interest. We at Southern Fabricating Machinery Sales are manufacturer's just like you. Coming soon. Lithia, FL 33547. Southern Fabricating Machinery ... moreSales, Inc. Located in the Tampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer.
Buy It Now
Condition: Used Location: Holland, United States 21.6″ SHUT HEIGHT OVER BOLSTER. 11″ STROKE. 82 1/2″ x 27 1/2″ T SLOTTED SLIDE. FLOOR STANDING. 120″ x 36″ BED. 25 HP MOTOR. PRESS MAY BE INSPECTED IN ... morePLANT. REFERENCE NUMBER: 17056C.
Buy It Now
Condition: Used Location: Elk Grove Village, United States 12A Injection Unit. Shot Size: 2.6 oz. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. All machine sales ... moreare subject to machine availabilty. Now you can!
Buy It Now
Condition: Used Location: Casa Grande, United States Type of Ram Cylinders..Double Acting. We also specialize in all types of saws – extended height vertical band/plate saws, horizontal band type, power ... morehack, and many types of custom table/feed sawing systems.
Buy It Now
Condition: New Location: Alto, United States Akyapak includes 1 to 300 tons conventional rotators in its standard lists. However, custom production can be realized up to 600 tons. Asset #15478. Conventional ... morerotators comprise of two units as 1 drive and 1 idle unit.
Buy It Now
Condition: Used Location: Holland, United States All machine sales are subject to machine availabilty. Catalogue Specifications Capacity: 220 Ton. Unless specifically stated in writing by PMS, all freight ... morecarriers must use flat bed truck only. Slide Stroke: 5.51".
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2525- 2538(1) Used 10 Ton WARD Up-Acting ... morePneumatic Lamination Press; All Steel Construction; 4 Post; Mfg. 2000 Specifications: Capacity.10 Ton@ 80 PSI Bed Area.24" F-B x 54" L-R. Ram Area.24" F-B x 54" L-R. Distance Between Post.70" L-R 20" F-B. Stroke of Ram(Slide)2" Daylight Opening.2 1/8" Distance Floor To Ram. Main Ram Diameter(10)5" nominal) Air System.Variable Volume Pressure Compensated. Electrical Characteristics.460 VAC/ 3 Phase/ 60 Cycle Type of Platen Heating.Electric. Platen Temperature.350 degrees Fahrenheit Platen Thickness.1" Equipped With: Complete Air System With Reservoir Complete Electric Controls With Touch Pad Screen Complete Platen Heating System Controls. Loading/Unloading Conveyor System Overall Dimensions.87" F-B x 87" L-R x 65" Height Weight.2.000 lbs(est. F.O.B.Casa Grande. Arizona. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With
Buy It Now
Condition: Used Location: Delta, United States 15 Ton Tishken Tilt Type Cut-Off Press. Bed 8" x 12". Press may be inspected in warehouse storage in Delta, OH.
Buy It Now
Condition: Used Location: Elkhart, United States Stroke - Ram Travel.. 0 - 7". Closed Height.. 6" ( Maximum Stroke). Integral Motor Driven Hydraulic Pump - Oil Sight Gauge - Oil Reservoir - Pressure ... moreGauge.
Buy It Now
Condition: Used Location: Elkhart, United States For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock ... morenumber: 23169 DENISON GAP FRAME HYDRAULIC PRESS MODEL: A SERIAL NUMBER: 3713 GENERAL SPECIFICATIONS Bench Model On Stand Capacity: 2 Ton EQUIPPED WITH 1/2 HP Motor. 220/440/60/3 Touch Probe Finger Operation F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street. Cincinnati. Ohio 45223. 513-542-8400. 800-745-6008. Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157. ICCI: Tyler Rose 1-888-773-6785. Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308. All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item. Any item purchased with a pick up or delivery date more than 10 days from date of sale may be subject to a storage fee. please discuss with seller before purchase. Return Policy We accept returns within 30 days from the sh
Buy It Now
Condition: Used Location: Elk Grove Village, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 5.2". Need to call us?. Serial Number: 10251.
Buy It Now
Condition: Used Location: Perrysburg, United States Stroke: 2". Push Buttons. NOTE: No Base (Stand) Included. Capacity, Approx.: 18 Tons. Bottom Die Rail Length: 16". Top Die Rail Length: 10".
Buy It Now
Condition: Used Location: Toledo, United States 150-Ton Niagara Press, Model SC2-150-60-36 Model: SC2-150-60-36Capacity: 150 TonsMax Above Bottom of Stroke: ¼”Shut Height: 23-1/2”Slide Adjustment: 9”Stroke: ... more10”Bed Size/ Slide Area (L-R F-B): 60” x 36”Strokes Per Minute: 40Rated Air Pressure: 35 - 44 PSIT-Slotted Ram & Bolster
Buy It Now
Condition: Used Location: Mansfield, United States STROKE OF SLIDE. . 8". BED AREA (L-R) x (F-B). . DUAL PALMS. TWIN END DRIVE - GEARS IN OIL. SINGLE BACK GEARED. EQUIPPED WITH: AIR CLUTCH TYPE. AIR COUNTERBALANCE.
|