|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$30.00 Shipping Condition: Used Location: United Arab Emirates Questions? Call us: 1-877-328-9236. Fujikura FSM-40S Arc Fusion Optical Fiber Cable Splicer ADC-07 11184 Total Count. Manufacturer: Fujikura Model: FSM-40S ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Fujikura Condition: Used. Comes in non-original packaging. This splicer is in Good cosmetic condition with a few minor(normal) blemishes from use. There is one very small crack on the'top' electrode cover. But it does not affect operation. There is also a very fine scratch on the screen we almost didn't see. The worst is the right-side hinge on the heater, which is broken but stays in place if you are careful. Notes: This splicer is in Good working condition. We lack a proper fiber cleaver. But even with rough ends on our fibers the machine was able to make a joint, then analyze and tell us how bad the joint was. This unit passes LED. Motor, Dust and Stuff checks. We were able to get it to run an Arc Calibration test but we did not let it complete because we had the wrong fiber type. All the motors and the vision system work. It was able to auto-detect fiber type and measure cleave angles. The sensors give appropriate environmental data. The screen is clear and bright. The heater heats and blows hot air. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Fujikura FSM-40S Arc Fusion Splicer, 1) Top cover with carry handle, 1) Monitor cover, Specifications: Manufacturer: Fujikura, Type: FSM-40S Arc Fusion Splicer, Automatically align& join optical fibers, Aligns cores in 3 axes with video display in real-time, Measures and analyzes joint after splicing. Instant splice quality feedback, Applicable fibers: SM. MM, DS, NZ-DS, CS, and ED, Use programmable presets or auto-detect fiber type, 2 CCD cameras(no up/down mirror) High-resolution LCD monitor, Simultaneous X& Y axes observation, With tube heater for heat-shrinking fiber after splicing, Compact field instrument- 9" x 8&qu
Buy It Now
Free Shipping Condition: New – Open box Location: Charlotte, United States
Buy It Now
$7.83 Shipping Condition: Used Location: Middletown, United States
Buy It Now
$6.90 Shipping Condition: New – Open box Location: Haverhill, United States Fujikura 112-03100+A0.l, 473362-048 5M Optical fiber CABLE 50/125Giga-Link
Buy It Now
$25.00 Shipping Condition: Used Location: Bremerton, United States Fujikura FSM-18S/18R/60S/60R Battery BTR-08 Description Ni-MH Battery. Out put 13.2v-4000mAh The Detachable Battery Pack. BTR-08 is used exclusively for ... moreFujikura Arc Fusion Splicer, FSM-60S, FSM-60R, FSM-18S, and FSM-18R. The battery is rechargeable. And to be charged by ADC-13 AC adaptor and DCC-14 charge cord. Package: Fujikura BTR-08 battery-1pc Warranty* Payment to be returned if Customer is not satisfied with the product and Refund in 3 working days while received the returned product. Service We also have very good offer for: Brand New Furukawa Fitel S178A V2 splicer Kit-Sumitomo Type Z1C splicer-Fujikrua FSM-60S splicer-Fujikrua FSM-60R Ribbon splicer-OTDR JDSU MTS-6000/4000/2000. OTDR EXFO FTB-200V2-OTDR Ando AQ7275, Fiber Tool Kit, Portable Optical Power Meter and Light source. Shipping Shipping to worldwide, Shipping cost around US$40.00 to worldwide from Hong Kong via UPS. FedEx, DHL and take 2~3 working days Payment Only acceptable forms of payment are PayPal. Contact information.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e94bd0349-0xff-
Buy It Now
Free Shipping Condition: New – Open box Location: Adrian, United States
Buy It Now
Free Shipping Condition: New Location: Ortonville, United States AFL Fujikura FP-04T Fusion Protection Sleeves 40MM, 1-8 Fiber Ribbon (Bag Of 25). 40mm fiber protection sleeves for 1-8 fibers.Bag of 25eaThanks,Gabe
Buy It Now
$49.00 Shipping Condition: Used Location: Vietnam
Buy It Now
$6.05 Shipping Condition: New – Open box Location: Hingham, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Eastlake, United States No factory box or literature. Shelf wear, nothing major, see photos. Free shipping via USPS First Class. NOS. Surplus
Buy It Now
Free Shipping Condition: Brand New Location: China Fits Model No: For Fujikura CT-20, CT-30 high precision optical fiber cleavers. Rotating knife surface: 16. Cutting angle: 0.5 degree (single core fiber). ... moreBlade life: 48000 (1000 3 16). We will reply you ASAP.
Buy It Now
$15.00 Shipping Condition: Used Location: Grove City, United States We have available a used Toshiba - ST1500GXH24 Power module. Came out of a IGBT phase power stack. We also have some Fujikura aluminum press pack water ... morecooled heatsinks. We show some pictures in the ad. If you want some we have them for sale. This auction is for (1) power module. Buyer to pay UPS ground shipping. Thank you for looking. Mike Tenney - Tenney Equipment Company
Buy It Now
Free Shipping Condition: Used Location: Montpelier, United States Fujikura 75-Ohm High Frequency Coaxial Cable. Cable Part Number: 5C-FB. Cable Length: 50 ft. This item is for sale locally and may be removed without ... morenotice.
Buy It Now
Free Shipping Condition: New Location: China Fiber holder for Fujikura FSM-60S 80S 12S 21S 22S Fusion Splicer. For Fujikura Fusion Splicer 900um Fiber Pressure Plate Fiber Holder Fiber Optic clamp ... moreFH-60-900. Model : FH-60-900 (Single Core). Great service.
Buy It Now
Free Shipping Condition: New Location: China WE will make sure give you 100% satisfactory answer.
Buy It Now
Free Shipping Condition: New – Open box Location: Rochester, United States Fujikura-S E49075 AWM Style 2532 VW-1SC -F- Cable Assembly. This cable is up for sale! It looks like it has never been used.
Buy It Now
$16.50 Shipping Condition: Used Location: Ormond Beach, United States FUJI ELECTRIC FA AFL S016817 RS03 Fujikura Thermal Stripper for Ribbon Fiber (211207).
Buy It Now
$5.95 Shipping Condition: New Location: Brentwood, United States
Buy It Now
Free Shipping Condition: New Location: Pleasanton, United States These blades or wheels can used for the following fujikura cleaver models: CT-O4B-SB, CT-04B, CT-03HT-06, CT-04, CT-07, CT-80B, CT-103, CT-104, CT-107, ... moreCT-02.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Newport, United States 770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, ... moreOn these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. FUJIKURA ALCOA CT-04B HIGH PRECISION FIBER CLEAVER This auction is for one Fujikura CT-04B. Alcoa Fujikura Ltd. sets the standard for fiber cleavers by offering Fujikura's High precision fiber cleavers which provide precise optical fiber cleaving in a high quality. Economical insrutment. The cleavers are easy to use, and exact in their performance. Cleaving with Fujikura's precision cleavers is a highly repetitive process. Each fiber is quickly scribed and broken, leaving mirror finish end-faces requiring no additional processing before splicing or termination. Splicing time is reduced with Fujikura's precision cleavers because poor scribing, inaccurate breaking, and damaged fibers are virtually eliminated. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. G
Buy It Now
Free Shipping Condition: New Location: Fergus Falls, United States FUSEConnect is compatible with Fujikura fusion splicers and most other fiber holder-based fusion splicing platforms. The FUSEConnect fusion-spliced, field-installable ... moreconnectors are uniquely designed and feature only four to five components.
Buy It Now
$15.45 Shipping Condition: Used Location: Clover, United States FUJIKURA-S - CABLE FOR YASKAWA MOTOMAN ROBOT. AWM STYLE 2464. 4 ft CABLE LENGTH. SP17-09 LISTED ON ONE END OF CABLE. BB03-09 LISTED ON OTHER END OF CABLE. ... moreNEW, in box. USED, but in good working condition.
Buy It Now
Free Shipping Condition: New Location: Hot Springs National Park, United States D/MS3106A18-10S (D190). Straight Cable Plug. unless stated differently in the above ad . (FACTORY SEALED).
Buy It Now
$30.00 Shipping Condition: New Location: Hong Kong SAR China Original Fujikura Ribbon Fiber Heating Thermal Stripper RS03 hot jacket stripper. Model: RS03. Universal Ribbon Stripper for RS03. Battery Capacity for ... moreRS03. The RS series ribbon stripper has an ergonomic design and requires lower stripping force than the previous strippers.
Buy It Now
Free Shipping Condition: New – Open box Location: Rochester, United States Type: Compeed Wire. The item is exactly as pictured.
Buy It Now
$68.00 Shipping Condition: Used Location: Philippines WARRANTY |. We will then arrange the booking and pick-up service.
Buy It Now
$3.79 Shipping Condition: New Location: China Fits Model No: For Fujikura CT-20, CT-30 high precision optical fiber cleavers. Rotating knife surface: 16. Cutting angle: 0.5 degree (single core fiber). ... moreBlade life: 48000 (1000 3 16). We will reply you ASAP.
Buy It Now
$7.96 Shipping Condition: New – Open box Location: Riceville, United States Fujikura Coaxial Cable Assembly. Connector: TNC Male Plug. Connector: Type N Female Jack. (zip 37370). Length: 9 Feet. It's often to late to solve them ... moreif you wait. When you buy an item it will not be listed as a "gift".
Buy It Now
Free Shipping Condition: New Location: China 1PCS New CAB-L60-4XAF Analog Upgrade Cable For Matrox M9120 P690 Plus 4-Display. 1PCS New NI PCIe-6321 X Series DAQ 16AI 24DIO 2AO 781044-01. 1PCS NEW ... moreFOR 871TM-BH8N18-N3 Inductive Proximity Sensor. 1pcs new TT240N34KOF TT240N36KOF TT240N38KOF IGBT module.
Buy It Now
$5.95 Shipping Condition: New Location: Lakeland, United States This lot includes 10 Fujikura 9718-1S circular connectors with solder termination and a wire-compatible mounting type. The connectors feature 10 ports, ... moreeach with 5 or more poles and silver contact material. They are made in Japan and come in a vibrant blue color. This lot is perfect for anyone in need of high-quality wire connectors for their electrical equipment and supplies. With the trusted Fujikura brand and durable construction, these connectors are sure to provide reliable and long-lasting connections.
Buy It Now
Free Shipping Condition: Used Location: Exeter, United States We primary injection test and secondary test all breakers that are listed as tested. We are always buying!
Buy It Now
$8.00 Shipping Condition: Used Location: Mesa, United States YOU ARE BUYING ONE FUJIKURA BF CYLINDER FCD-31.5-35. (MWUPWS5) (SDG).
Buy It Now
Free Shipping Condition: New – Open box Location: China 100% test before sending. The more you buy, the more you save. Any problem we will try our best solve it.
Buy It Now
Free Shipping Condition: New Location: Sherwood, United States Number of compatible connector cores(Core)9. SpecificationsL-shaped 90° Type. Mating screw size#4-40UNC.
Buy It Now
Free Shipping Condition: New Location: Venice, United States Florida Industrial Surplus.
Buy It Now
Free Shipping Condition: New Location: San Jose, United States
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$56.50 Shipping Condition: New – Open box Location: Philippines Item Condition: NOB. WARRANTY |. We will then arrange the booking and pick-up service. A:Hmmmnnnn yes.
Buy It Now
Free Shipping Condition: New Location: China For Fujikura Fusion Splicer FSM-60S FSM-80S FSM-12S FSM-21S FSM-22S Fiber Holder, FH-60-900 Fiber HolderFor Fujikura Fusion Splicer 900um Fiber Pressure ... morePlate Fiber Holder Fiber Optic clamp FH-60-900.
Buy It Now
$5.95 Shipping Condition: New Location: Lakeland, United States This lot consists of 10 Fujikura 9718-4P circular connectors, each with 4 ports and 4 pins, and termination type of solder. The connector style is also ... moresolder, with a contact material of silver and made of plastic and copper materials. This high-quality connector is made in Japan and is compatible with wire mounting types. It comes in an attractive blue color and is perfect for use in electrical equipment and supplies, as well as wire and cable connectors.
Buy It Now
$6.00 Shipping Condition: New – Open box Location: Kawkawlin, United States Fujikura JMSP2524F-D / 25186-10240 Straight Plug, Size 25, 24 Pole, Female, Plastic Hood, Solder Connections. NO VERBAL CONFIRMATION WILL BE GIVEN, THIS ... moreMUST BE IN WRITING. Item is sold as pictured.
Buy It Now
Free Shipping Condition: New Location: Sherwood, United States PN: 17J-15. Quantity: 1.
Buy It Now
$9.83 Shipping Condition: New – Open box Location: Wyandotte, United States New Shelf Worn. If you have any problems with any item let us know, we are here to help as much as we can.
Buy It Now
$11.94 Shipping Condition: New – Open box Location: Clinton Township, United States FUJIKURA DMS3102A20-7P-F, PANEL MOUNT RECEPTACLE. MANUFACTURED BY: FUJIKURA. FUJIKURA DMS3102A20-7P-F. PANEL MOUNT RECEPTACLE. You will need to provide ... morethe label and arrange for pickup. Learn more about what we do.
Buy It Now
$15.46 Shipping Condition: New Location: State College, United States FUSEConnect is compatible with Fujikura fusion splicers and most other fiber holder-based fusion splicing platforms. The factory pre-polished ferrule ... moreeliminates the need for polishing, adhesives, and crimping in the field, which minimizes the potential for operator error and expensive connector scrap.
Buy It Now
$15.46 Shipping Condition: New – Open box Location: State College, United States FUSEConnect is compatible with Fujikura fusion splicers and most other fiber holder-based fusion splicing platforms. The factory pre-polished ferrule ... moreeliminates the need for polishing, adhesives, and crimping in the field, which minimizes the potential for operator error and expensive connector scrap.
Buy It Now
Free Shipping Condition: New Location: China 6 core Fiber holder Chuck for Fujikura FSM-90R FSM-88R FSM-70R Ribbon Fusion Splicer.
Buy It Now
$3.89 Shipping Condition: New Location: China Fits Model No: For Fujikura CT-20, CT-30 high precision optical fiber cleavers. Rotating knife surface: 16. Cutting angle: 0.5 degree (single core fiber). ... moreBlade life: 48000 (1000 3 16). Bike Bicycle Motorcycle Phone Holder Mount Aluminum Motorcycle Bracket Stand.
Buy It Now
$3.00 Shipping Condition: New Location: China 100% new Compatible with: Electrodes Fiber Fusion Splicing Machine Fujikura FSM－40S、FSM－30S FSM-10S What in box: 1 x Electrodes for Fujikura Payment 1. ... morePayment methods accepted: Paypal only. 2. Payment must be received within 7 business days of auction closing. Shipping 1. We ship your orders within 1-2 business days after the payment received. 2. Item shipped via Singapore Post or HongKong Post. It takes about 7-14 business days(USA,CA,AU,UK)others country 10-20 business days(Brzil,India,RU)Exact delivery time depends on postal process. 3. If you do not receive your item(s) by 30 business days.Please feel free to contact us via ebay mail system, we will try our very best to resolve any problems with you Return Policy 1. Return is accepted within 14 days after the buyer's receiving the item. 2. If this item is defective upon receipt. Customer has up to 14 days from date of receipt for exchange of a new one. 3. Unused/unopened merchandise will be fully credited. Other Policies We are not responsible for any custom duty or import tax. If you need we write low price on shipping bill. Pls leave message when you make payment. All emails will be answered within 24 hours. If you do not receive our reply. Please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find.
Buy It Now
Free Shipping Condition: New Location: China We will reply asap.
Buy It Now
Free Shipping Condition: New – Open box Location: Bonita Springs, United States KEEP IN MIND ALL OUR PRODUCTS HAVE NON REMOVABLE TAMPER PROOF HOLOGRAMS AND WE KEEP SERIAL NUMBERS AND DIGITAL PHOTOS OF THE PRODUCT ON FILE!
Buy It Now
Free Shipping Condition: New – Open box Location: Exeter, United States We are always buying! Vital Information We primary injection test and secondary test all breakers that are listed as tested.
Buy It Now
Free Shipping Condition: Used Location: Denver, United States We primary injection test and secondary test all breakers that are listed as tested. We are always buying!
Buy It Now
$5.95 Shipping Condition: New Location: Brentwood, United States
Buy It Now
$3.00 Shipping Condition: New – Open box Location: San Jose, United States This is a new DDK Fujikura Connector -- 28-16SF --.
Buy It Now
Free Shipping Condition: New Location: Hot Springs National Park, United States 28 PIN Female Circular Connector. unless stated differently in the above ad .
Buy It Now
Free Shipping Condition: New Location: Hot Springs National Park, United States Female Circular Connector. unless stated differently in the above ad . L-1 BIN 29.
Buy It Now
$15.45 Shipping Condition: Used Location: Clover, United States AWM STYLE 2464. FUJIKURA-S - CABLE FOR YASKAWA MOTOMAN ROBOT. 7-1/2 ft CABLE LENGTH. 1003-07 & DDK2-2 ON ONE END OF CABLE. BB03-10 & DDK2-2 ON OTHER END ... moreOF CABLE. NEW, in box. USED, but in good working condition.
Buy It Now
Free Shipping Condition: New Location: China For Fujikura FSM-60R FSM-70R FSM-12S FSM-19S FSM-70S fiber splicer. FH-60-900 Fiber holder. 900um fiber pressure plate.
Buy It Now
$12.90 Shipping Condition: Used Location: Willingboro, United States FUJIKURA 9728-10P / 972810P (USED TESTED CLEANED) DISCONTINUED BY MANUFACTURER, CIRCULAR INSERT, 7 PINS, SOLDER CUP, BLUE. The product is used surplus. ... moreRadwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
|
|
|
|
Fujikura FSM-20PM , PM fiber arc fusion splicer for PM, SM and MM optical fibers
Gentlemen. I have studied all parts of the component level in this auction. Believe that if I want to sell this drill at the component level I can eventually realize my asking price plus. It would be ashamed to tear this platform and sales it, because it is really in some bizarre shapes. Auction will run in this price, however, until I'm sure I must part. Thank you for coming. Auction is a yamaha PM3000 40 channel audio console 2 power supplies. Pei treatment with interconnect and tail, a Ramsa WR- S840 40 channel audio console 2 power supply, monitoring, treatment with interconnect and tail. The host is in great shape and has been for many years. Conditions is 8 to 9 to 10. No known issues. There is a broken in channel 40 Ramsa auxiliary knob. This system is perfect, church, or club sound company. The following is included: Pei frame ... more1 juice goose lighting power supply board 1 audio control industry. Etc 1 drill 300 delay. Roland Yamaha 2 standard& poor's 900 index. SPX 2 the TC electronic M2000 4 the DBX 166 1 Klark Teknik DN 716 2 Klark Teknik DN 300 2 valley Gatex 1 teaching Tascam 112 b Monitor aircraft 1 juice goose lighting power supply board 1 audio control industry. Etc 1 yamaha standard& poor's 900 index. SPX 4 the DBX 166 5 Ashly GQX 3102 2 valley Gatex Each has a whirlwind W4 contact star quality connector to connect to each unit. Has a 15 cyclone. Tornado W4 W4 interconnection and whirlwind W4 tail for each console. Hubble 5 pin twist in and out of power, combined with practical Edison stores inside and outside the frame. Rack has been a whirlwind of pei W1 transmission line parallel to the XLR men/women. Transformers" pei has Jensen in the first six drive circuit 90% into new The original packaging and specification Payment: We only accept bank' transfers. Buyers have to contact us prior to purchase. Payment must be made within 3 business days. If no payment is made within this time frame. Your order will be canceled and a case will be opened, unless arrangements are mad
|
|
|
Fujikura Fiber Optic Cleaver CT-07
Fujikura Cleaver In Very Good Condition. Blade Has Just Been Rotated. This Unit Will Provide Solid Cleaves For Years To Come. Heavy Duty.
|
|
|
FUJIKURA HIGH PRECISION FIBER CLEAVER CT-07BS
USED FUJIKURA HIGH PRECISION FIBER CLEAVER. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13eb7f2ef11-0xf8-
|
|
|
Fujikura ARC Fusion Splicer Type FSM-30S Yellow Hard Carrying Case Manual Light
BUY IT NOW Price! Priced to SELL@ $2.275.00& FREE USA SHIPPING! This Ebay item is a used equipment by Fujikura of Japan. IT IS A FUJIKURA ARC FUSION SPLICER type FSM-30S This is used& power up fine. All the connections& knobs are undamaged. As a whole this is in good clean condition. The screen changes to many differant screens when the control buttons are pushed. Sorry we have noway to fully test it before shipping. Local Buyers are welcome to inspect this in our warehouse before purchasing. Please call& make an appointment. 815-838-0134. Buyers may also call us or send us their day time phone# have us try any simple test procedures with their instructions while on the phone. Please see pictures of the actual Ebay item. IT! Everything& ONLY WHATS PICTURED IS INCLUDE. The Ebay item includes the FSM-30S. Power cord, Instruction ... moreManual, Light& hard yellow carrying case as pictured. As with most items we sell here on Ebay. This is Sold As Is, No Warranty& No return. RELIABLE COMPUTER SERVICES. Inc. 28 Years of Buying& Selling computer hardware by DEC or"Digital Equipment Corporation" Since 1985. RCS Inc. has been buying& selling computer hardware by DEC or Digital Equipment Corporation for 28 Years. Buying whole machines/sights& selling the peripherals& parts to Maintenance companies& even back to DEC. When it comes to purchasing or selling computer hardware by DEC. Call the company that delivers what they promise at the fairest market price. We will also be selling many non DEC related items here on Ebay. We will be attending many auctions.Liquidations,surplus& bankruptcies sales here in Chicago& the Midwest area. We will be selling a wide variety of items. From printers& plotters to floor scrubbers& Oscilloscope. Tools, Antique's,Computer hardware, Copiers, motors, generators, Radios, Test& Scientific Equipment. Please check back often, most auction will run-7- days. Payment is due within 10 days of purchase. All International shippi
|
|
|
Fujikura FSM-30R12 SM MM Fiber Fusion Splicer Cleaver Stripper Splice Count 284
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Description Main Heading Goes Here Fujikura FSM-30R12 SM MM Single& Ribbon Fiber Fusion Splicer w/ Cleaver. Hot Stripper, Fiber Holders. Like new. Only 200+ Splice Count Description ALCOA FUJIKURA FSM-30R KIT RIBBON FIBER ARC FUSION SPLICER SM MM DS NZ-DS OPTIC FUJIKURA FSM-30R RIBBON SPLICER Manufacturer Description The new Fujikura FSM-30R12 brings a new level of productivity and capability to mass fusion splicing. The well proven and market leading mass fusion splicing technology of previous Fujikura mass splicers is now provided in an extremely small and light weight mini-splicer. Improved immunity to ambient conditions and slide-in modular powering units(including battery) provide unprecedented mass fusion splicing capability in remote and outdoor splicing locations. ... moreThe FSM-30R12 takes mass fusion splicing productivity to a new plateau with 12 fiber splicing time cut to one third that of previous generation mass splicers. The tube heater for heat shrink splice protection sleeves is twice as fast as the previous generation. The FSM-30R12 is the ideal mass fusion splicer for any application. This system has the following features: Best mass fusion splice loss performance in the industry. Including splicing non-zero dispersion-shifted(NZ-DS) fibers, Maximum productivity with much faster splicing than previous mass fusion splicer: 30 second splicing time, New wind protector design withstands 30mph cross wind, Unprecedented utility in exposed conditions, Splices up to 12 fibers simultaneously, Ultra small and lightweight design; ideal for remote/outdoor splicing scenarios, Built-in programmable tube heater, Slide in power modules include AC adapter. Battery, or camcorder battery adapter, Automatically adjusts fusion arc to compensate for cold temperatures. As well as differences in atmospheric pressure, Simultaneous focus on all 12 fibers and large image magnification on low glare 5Ó color LCD monitor provides great fiber visibility, Great m
|
|
|
Fujikura FSM-20CS II Digital PAS Single/Multi-Mode Arc Fusion Fiber Splicer
Search our eBay Store! Fujikura FSM-20CS II Digital PAS Single/Multi-Mode Arc Fusion Fiber Splicer SKU: JV-NIC-C-FUSPLICE Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Fujikura FSM-20CS II Digital PAS Single/Multi-Mode Arc Fusion Fiber Splicer*FOR PARTS OR REPAIR* Model: FSM-20CS II Physical Condition: Good; Unit has minor scuffs and scratches; There are no visible scratches on the digital display; Unit is missing all of its side panels and circuitry is exposed; This unit was a customer return. Customer stated that unit powers on with working display and buttons but ... moredoes nothing else. Power cable is not included. Dimensions(L"W"H" 10* 8 ¼* 12 3/8 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please
|
|
|
Fujikura FSM-20CS fiber arc fusion splicer for Single/ Multi-Mode optical fibers
Please feel free to make an offer! Even via email. If the option is currently not available. Every offer received is seriously considered! Please view all of the pictures for a full description. The item shown is the item you will receive. If you have any questions please ask them before you purchase the item. FOR SALE 1 x Fujikura FSM-20CS fiber arc fusion splicer for Single/ Multi-Mode optical fibers Unit is used and in good condition. It was taken out from a working. Professional environment. Item is fully functional. Or your money back! Manufacturer's Information(for informational purposes only) Fujikura FSM20CS fusion splicer utilizes a PAS(Profile Alignment System) that aligns the core of single-mode and the cladding of multimode fibers. A built in monitor allows cross-sectional viewing of the prepared fiber ends. And displays cleave ... moreangle and estimated splice loss. the system will splice both single-mode and multi-mode fibers. Alignment, fusion and splice loss estimation are automatically completed by the built-in computer. Fujikura FSM-20CS Fusion Splicer Features Splicing Capabilities: Single–Mode/ Multi–Mode Splice Loss Estimation Function/ Calculation Capability Atmosphere. Humidity and temperature compensation functions provided 3" LCD monitor with excellent view ability in direct sunlight Memory: 100 splice data sets with internal memory High Intensity Halogen Inspection Lamp Product description: This machine is in clean cosmetic condition. Shows little wear& tear. Only the power cord. But no other cables or accessories included. Mfg. Date: 1992.9 IMPORTANT INFORMATION: the item MIGHT have a problem with its display(according to the previous owner. Sometimes the LCD turns itself off. In the repair shop they did not found the source of the error, and even the device did not show any sign of this malfunction. It was classified as: FULLY FUNCTIONAL) I have no tool and knowledge to verify it, and so I sell it as-is. Unit powers on with a working display,
|
|
|
Fujikura FSM20RS-12 ribbon fusion splicer
Good condition.Fully tested!e/w-Qty-4 12 fiber pads,Qty-4 single fiber pads,Carry case,manual,ac cord. Powered by
|
|
|
Fujikura FSM20RSII-12 ribbon fusion splicer
Good condition.Fully tested!e/w-Fujikura cleaver,Hot jacket stripper,single fiber pads,12 fiber pads,ac cord, carry case,manual. Powered by
|
|
|
Fujikura FH-50-12 Fiber Holders for 12-Fiber Ribbon
Description: The FH-50 series of fiber holders is exclusively used for Fujikura FSM-60R. FSM-18R, SpliceMate FSM-11R, and previous Fujikura mass fiber splicers, as well as the FSM-17S-FH and SpliceMate FSM-11S single fiber splicers. These fiber holders also work on the CT-30 fiber cleaver and previous cleaver models. Fujikura Fiber Holder System is developed to provide appropriate splicing work for several kinds of fibers. Single or ribbon. The FH-50 series fiber holders are supplied in pairs for left and right orientations. For sale is a pair of fh-50-12 fiber optic holders Specific Details: Applicable number of fiber 12-fiber ribbon Fiber holding Magnetic clamping Fiber Holder placing into splicer Guide-pin system with two pins per one side of Fiber Holder Dimensions(mm) 39L x 16W x 7H Weight 20g for 1 pair Material Base plate: Heat-hardening ... moreplastic/ Lid: Iron-Nickel alloy Arc Fusion Splicer FSM-60R. FSM-18R, FSM-11R SpliceMate, and previous mass fiber splicers Fiber Cleaver CT-30 and previous model fiber cleavers Jacket Stripper HJS-02. HJS-03. Posted with Posted with
|
|
|
Fujikura CT-03 High Precision Fiber cable Cleaver
used. Very old product, 1993 made, Fujikura CT-03 High Precision Fiber cable Cleaver, looks in good condition; I do not like the 3 steps cleaver. So do not know how to operate it, I like the diamond cleaver, but seems someone like the such cleaver very much, just sold it as is; shipped by China Post(express) to the destination. sorry do not ship to Iran. Russia.
|
|
|
Fujikura CB-12 Fiber Cleaver Blade CT-03 04 20 30 100
Search our eBay Store! Fujikura CB-12 Fiber Cleaver Blade CT-03 04 20 30 100 SKU: JV-DUY-A-CB12 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Fujikura CB-12 Fibre Cleaver Blade for High Precision Fibre Cleaver CT-03/04/07/20/30/100 Model: CB-12 Physical Condition: Used; blade does not show excessive signs of use Blade diameter: 7/8” Please visit the following link for product information(For Informational Purposes Only) PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The ... moresale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please contact us before leaving feedba
|
|
|
FUJIKURA CT-30 HIGH PRECISION FIBER OPTIC CLEAVER-
Fujikura C T-30 High Precision Fiber Cleaver- FREE SHIPPING! Very good condition. Used and maintained by myself. Original owner. See high detail photo s. Mechanically perfect. Produces excellent cleaves, has some tiny and alm o st invisible cosmetic p aint scratches at bottom of base. From normal use in the fie ld and mobile lab. See photo 10) With fiber collector and standard size scrap box. Storage Case handles on right side got cracked. But were re-glued. This is a common injury seen with Fujikura"Tupperware"cases. When improperly opened by newbies. B y pulling the handles open instead of lifting from the center tab to open the case. see last photo)Does not effect performance of case in any way. Comes with hex key. Or iginal instruction booklet and side plate. If you prefer to use without the scrap collector system. I am also ... moreincluding a n additional instr uc tion sheet on changing blade height and position. Which is far better th an the original one that Fujikura provides. This is a great tool that will last a lifetime. At a big savings over buying new, for hundreds of $$ more! SHIPS FAST AND FREE IN THE U.S.A. Satisfaction Guaranteed. Please check my e Bay seller feedback and buy with confidence! Any questions? Please contact me. I will happily answer any questions you may have. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Fujikura Fiber Holders FH-12 FH-250 FH-6 FH-2 FH-900 RHS 12U SM2U *LOT OF 24*
Fujikura Fiber Holders*LOT OF 24* Lot Includes: 5) FH-250. 6) FH-6. 5) FH-12. 2) FH-2. 3) FH-900. 2) RHS 12U. 1) SM2U. You are bidding on a lot of 24 used Fujikura Fiber Holders. I do not know much about these but they look like they are in pretty good condition. Please e-mail me if you have any questions. All items are described to the best of our knowledge. We are equipment resellers. Not professional technicians. Please e-mail us with any questions. USA Bidders Only Winning Bidder is to pay the Bid amount plus $9.99 for packing and shipping for lower 48 States. All buyers located in Georgia will pay 7.0% sales tax. Buyer can Pay with: Paypal. I cannot ship to a P.O. Box. USA Bidders Only. Thanks. You are buying used electronics from a company that has a zero land fill policy. Any old or obsolete equipment should be returned for proper ... moreelectronic recycling. F1) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fujikura HJS 02 HJS02 Hot Jacket Stripper 50R 50S 60R 60S Splicer
Fujikura HJS02 Hot Jacket Stripper is in good working and cosmetic condition. Tested and works. Pulled from a working environment. Includes everything pictured. See pictures. I will ship within one business day. Feel free to ask any questions. Always happy to help.Contact me if you have any issues. Thank you
|
|
|
FUJIKURA CT-04 FIBER OPTIC CLEAVER SPLICER CT04
Available for sale is a fujikura fiber optic cleave in great working and cosmetic condition the items comes as pictured with manual. The CT-04 precision fibre optic cleaver is exceptionally easy to use and offers consistently excellent results. Providing in excess of 24, 000 cleaves per circular blade. The CT-04 is a rugged. Self-contained unit designed to offer consistently reliable and accurate cleaves which cannot be affected by operator skill. The Fujikura CT-04 fiber cleaver is used for cleaving both single-mode and multi-mode fibers. It has two v-grooves. One for 250 micron o. D. Coating over 125 micron bare fiber, and the other is for 900 micron o. D. Coating over 125 micron bare fiber. This cleaver delivers consistent splices of less than 0. 5 dB loss. See Spec Sheet for Additional Information- See more at: http:www.testequipmentconnection.com/6786/Fujikura_CT-04.php#sthash.9YIYKchq.dpuf ... morePosted with
|
|
|
Fujikura 16S Fusion Splicer (Total Arc Count: 11)
Fujikura 16S Fusion Splicer Accessories that are included with unit are pictured Accessories are sold as is Total Arc Count: 11(Like New) Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f3524515a-0x104-
|
|
|
Fujikura FSM-30R Arc Fusion Splicer w/ Extras & Case --NO RESERVE--
Up for sale is a Fujikura FSM 30R ARC Fusion Splicer w/ Accessories. Includes: Fujikura FSM 30R Arc Fusion Splicer*High Precision Fiber Cleaver Model: CT-100B + Extra Blade*2) HJS-02 Fujikura Hot Jacket Strippers + 2 Cables*Magnification Device*Battery Pack BTR-04*Battery Charger ADC-07*Original Fujikura 30R Custom Case w/ Key*Extra Accessories The item is used. But has been stored a a long time. Does not have a recent update! The screen hinge is cracked on the left corner. DOES NOT AFFECT PERFORMANCE OR OPERATION SIMPLY AESTHETIC! I have the tested the Arc Fusion Splicer and therefore it is being sold AS IS! PLEASE LET ME KNOW IF YOU HAVE ANY OTHER QUESTIONS OR CONCERNS! IT WILL BE SECURELY PACKAGED AND SHIPPED ENSURED! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 The pictures in the posting are of the exact ... moreitem being sold and what you will receive! Feedback will be given after feedback has been received! Thank you for checking out my posting. Good luck bidding! NO RESERVE! PLEASE ASK ALL QUESTIONS BEFORE THE END OF AUCTION. PAYMENTS: The payment is expected within 3 days after the end of auction. PayPal Only! CALIFORNIA TAXES WILL APPLY TO ALL CALIFORNIA PURCHASES 8% SHIPPING: The item will be shipped within 1 business day after the payment is received! NO INTERNATIONAL SHIPPING! NO CANADA SHIPPING!
|
|
|
Fujikura FH-025 FH-025-2,FH-025-6,FB-12A,FH-900 Fiber Holder for 20RSII, 30R
$185/pair Fujikura Original Fiber Holder for 20RSII. 30R One pair Fujikura FH-025 Fiber Holder for 20RSII. 30R One pair Fujikura FH-025-2 Fiber Holder for 20RSII. 30R One pair Fujikura FH-025-4 Fiber Holder for 20RSII. 30R One pair Fujikura FH-025-6 Fiber Holder for 20RSII. 30R One pair Fujikura FH-025-8 Fiber Holder for 20RSII. 30R One pair Fujikura FH-025-10 Fiber Holder for 20RSII. 30R One pair Fujikura FB-12A Fiber Holder for 20RSII. 30R One pair Fujikura FH-2* Ribbon fiber holder for 30R 8 pairs Fujikura FH-8* Ribbon fiber holder for 30R 2 pairs Fujikura FH-900 Ribbon fiber holder for 30R Please let me know what the Model you need before you buy it. They are used but in good working condition.
|
|
|
lcd module (Lot of 20 nos) for Fujikura FSM50S
LCD modules(Lot of 20 nos) are of same Make and manufacturer as in new splicers. Fully compatible with Fujikura 50s. These are guaranteed to work as good as in new splicer. Prices are for lot of 20 nos and delivery will be through DHL.
|
|
|
Fujikura Arc Fusion Splicer FSM-30R 30 R With Carrying Case Fiber Optic
Fujikura Arc Fusion Splicer FSM-30R 30 R With Carrying Case Fiber Optic. Prev Stop Play Next Product Info. Fujikura Arc Fusion Splicer FSM-30R12 With Carrying Case*This item powers on. But is untested, as-is, and no returns. Auction comes with everything pictured. Comes with instruction manual. Please let us know if you have any questions! We most likely have items similar to the above for sale. Therefore. Don't forget to check out our other listings! Payment. Paypal and all major credit cards are accepted. Item(s) will only be shipped after completed payment. Sales tax is only applied to buyers in Florida. Shipping. We offer FREE SHIPPING on over 90% of our listings to the continental U.S. An extra charge will be applied to HI. AK, or PR purchasers. Item will be professionally packed and shipped following payment. All orders placed Monday- ... moreThursday will either be shipped the same day or the following day. Expedited shipping services available upon request. Orders will be combined if necessary. Also. Please don't hesitate to ask us any questions. We respond via eBay messaging around the clock.
|
|
|
Fujikura & Martock Design Fiber Fusion Splicer parts
New Fujikura& Martock Design Fiber Fusion Splicer parts
|
|
|
Fujikura FSM-40S Arc Fusion Optical Fiber Cable Splicer ADC-07 13815 Total Count
Questions? Call us: 1-877-328-9236. Fujikura FSM-40S Arc Fusion Optical Fiber Cable Splicer ADC-07 13815 Total Count. Manufacturer: Fujikura Model: FSM-40S Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Fujikura Condition: Used. Comes in non-original packaging. This splicer is in Good cosmetic condition with a few minor(normal) blemishes from use. There is one crack on the'top' electrode cover. But it does not affect operation. There is also a small dig on the screen near some scratches on the plastic by the left side of the screen. The worst is the left-side hinge on the heater, which is broken but stays in place if you are careful. Notes: This splicer is in Good working condition. We lack a proper fiber cleaver. But even with rough ends on our fibers the machine was able to make a ... morejoint, then analyze and tell us how bad the joint was. This unit passes LED. Motor, Dust and Stuff, I/O and Memory checks. We were able to get it to run an Arc Calibration test but we did not let it complete because we had the wrong fiber type(and the fibers were rough) All the motors and the vision system work. It was able to auto-detect fiber type and measure cleave angles. The sensors give appropriate environmental data. The screen is clear and bright. The heater heats and blows hot air. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Fujikura FSM-40S Arc Fusion Splicer, 1) Top cover with carry handle, 1) Monitor cover, Specifications: Manufacturer: Fujikura, Type: FSM-40S Arc Fusion Splicer, Automatically align& join optical fibers, Aligns cores in 3 axes with video display in real-time, Measures and analyzes joint after splicing. Instant splice quality feedback, Applicable fibers: SM. MM, DS, NZ-DS, CS, and ED, Use programmable presets or auto-detect fiber type, 2 CCD cameras(no up/down mirror) High-resolution LCD monitor, Simultaneous X& Y axes observation, With tube heater for heat-shrinki
|
|
|
Alcoa/Fujikura FSM-30R12 Mass Fusion Splicer
Alcoa/Fujikura FSM-30R12 Mass Fusion Splicer Alcoa/Fujikura FSM-30R12 Mass Fusion Splicer On this auction the cleaver could possibly use a new blade but is complete. Now the well-proven and market-leading mass fusion splicing technology of previous Fujikura products is provided in an extremely small and lightweight Mini Mass Fusion Splicer. This compact device brings a new level of productivity and capability to mass fusion splicing. It can splice two. Four, six, eight, 10 or 12 fibers simultaneously in just 30 seconds. Improved immunity to ambient conditions and slide-in modular power units provide unprecedented mass fusion splicing capability in remote and outdoor splicing locations. The Alcoa/Fujikura Model FSM-30R12 takes mass fusion splicing productivity to a new plateau with 12-fiber splicing time cut to one-third that of previous-generation ... moremass splicers. And the tube heater for heat-shrink splice protection sleeves is twice as fast as the previous versions. This mini model is the ideal mass fusion splicer for any application. Features Wind protector design withstands 30 mph cross wind, Built-in programmable tube heater, Slide-in power modules include AC adapter. Battery or camcorder battery adapter, Automatically adjusts fusion arc to compensate for differences in atmospheric pressure or altitude, Large image magnification on low-glare 5" color LCD monitor provides great fiber visibility, With this unit. You can expect the best mass fusion splice loss performance in the industry including splicing non-zero dispersion-shifted(NZ-DS) fibers. You get maximum productivity with a splicing time of 30 seconds which is much faster than previous mass fusion splicers. Its new wind protector design withstands 30-mph cross winds, so it provides unprecedented utility in exposed conditions. This unit splices up to 12 fibers simultaneously and features a built-in programmable tube heater. An ultra small and lightweight design makes it ideal for remote/outdoor splicing applications. Slide-in power modules including
|
|
|
FUJIKURA ALCOA AFL CT-03AT PRECISION FIBER CLEAVER CT03AT HIGH TENSILE CLEAVE
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. FUJIKURA ALCOA AFL CT-03AT PRECISION FIBER CLEAVER CT03AT This auction is for one Fujikura CT-03AT. ... moreIt supports diameters 250-900um and has a cleave length of 12mm. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an additional handling fee for the packing of the item. We will only ship to locations in the U
|
|
|
Fujikura FSM-50R12 SM MM Fiber Ribbon Fusion Splicer w/ Cleaver FSM50R FSM-50R
You're Bidding on a Fujikura FSM-50R12 Arc Fusion Splicer It includes everything in pictures. 100% functional. Arc Count is 4.172 Feel free to ask questions and take a look at the picture(s) before bidding. Shipping only to the U.S and only to the lower 48 states. No Alaska. No Hawaii, and No Puerto Rico.
|
|
|
FUJIKURA CT-03AT HIGH PRECISION FIBER CLEAVER ~~~ L@@KS GREAT! ^
THIS LISTING IS FOR A FUJIKURA CT-03AT HIGH PRECISION FIBER CLEAVER This item looks like it was never put into service and has no noticeable flaws or defects. Only the items shown in the pictures are included in this sale. This item is used. This item has a 14 Day DOA Warranty. Please feel free to make an offer! Every offer received is seriously considered! Please view all of the pictures for a full description. The item shown is the item you will receive. If you have any questions please ask them before you purchase the item. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for browsing ... moreour listing! Please visit our store and other listings for more great deals! Our Warranty(when offered) is only applicable to items that are DEAD ON ARRIVAL(DOA) Warranty is not applicable for unintended purchases or any other such instances. Please direct ALL questions and/or concerns through Ebay’s Contact Seller Module. Customer satisfaction is our highest priority and we strive for FIVE STAR RATINGS in every category! However. We are only human and regrettably mistakes do happen. If you are unsatisfied with your purchase in any way please contact us and allow us the opportunity to resolve ANY issues to your full satisfaction. Thank you! 042613
|
|
|
Fujikura FAT-02 Fiber Arrangement Tool FAT02/ Fusion Splicer
Fujikura FAT-02 Fiber Arrangement Tool Up For Sale is a USED Fujikura FAT-02 Fiber Arrangement Tool. This unit is in 100% working condition. Mino wear is evident(Scuffs and Scratches) Product Description The FAT-02 Fiber Arrangement Tool is an industry standard tool for forming individual 250µm coated fibers into ribbons. The fiber arrangement method uses an arrangement spring. The fibers are placed into the proper position within the spring. Eliminating the need to pre-sort the fibers and place them into the tool in numerical sequence. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13fb18cf51c-0xec-
|
|
|
Fujikura CT-07 CT-07BS Optical Fiber Cleaver
Fujikura CT-07 CT-07BS Optical Fiber Cleaver It is used but in good working condition.We can provide 7days ROR.
|
|
|
High Precision Fiber Cleaver, Fujikura ltd
The cleaver is in great shape no issues. The cover is cracked on one corner but stills works and latches. Email with any questions.
|
|
|
Fujikura FSM-60S Arc fusion fiber optic splicer w/CT-30 cleaver Corning Unicam
Guaranteed good working condition USA model Fujikura FSM-60S fiber optic splicer. CT-30 cleaver and Corning Unicam Kit. 7630 splice count, 2 corning crimp tools, TL-UCO1, corning fiber pen, FBC-001, cases and cables as shown, software for the FSM-60S. If it's not pictured it's not included. flat shipping of 50.00 to the lower 48, SERIOUS OFFERS CONSIDERED.
|
|
|
Fujikura,ARC Fusion Splicer,FSM-20C
Return Policy: No Returns- Item sold AS IS. Shipping Information-For the exact shipping cost. Please contact me via e-mail
|
|
|
Fujikura SH-4 no. 1579 Tube Heater Fusion *Splicing "NO RESERVE"
Heres a clean Fujikura tube heater. Was used for fusion splicing, works fast and good, no issues, comes with power cord, Free Shipping US 48, Thanks for looking!
|
|
|
Fujikura fsm 18s fiber optic fusion splicer
The FSM-18S Fusion Splicer is a low cost. Fixed V- groove, single fiber fusion splicer with the same robust features offered in other high end models. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and withstands a 30€ drop test New features such as automatic tube heater operation, user-selectable clamping method(sheath clamp or fiber holder system) automated monitor with orientation, and battery charge capability during splicer operation provide the end user a reliable productivity tool. Software included with splicer and provides the user with the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the performance, and download video images from the splicer to enhance ... moretechnical support Features Rugged construction providing shock, dust and moisture resistance Dual monitor position with automatic image orientation Automatic arc calibration User-selectable fiber clamping method €“ sheath cl or fiber holders Auto-start tube heater Color LCD display and anti-reflective coating for excellent visibility in bright sunlight Simultaneous battery charge and splicer operation Long life battery(up to 150 splice/heat cycles per charge) charge) Detachable work table incorporated into the transi case case Data and video download software and splicer software included, can do software upgrades through PC as well.
|
|
|
Fujikura SH-7 no.0232 Tube Heater
Unit shows very little sign of use and is in excellent condition. Has been sitting on the shelf in a bag with no charger cord for an unknown time. Since we don't have a cord or Know its history we're selling as is. Sorry it is UN Tested and I don't have a cord or a comparable cord to test it with. So that will be reflected in the bid start price: Thank you and good luck bidding. Posted with
|
|
|
Fujikura 30R (BTR-04) battery, charger cord and screen cover.
Battery is still in good condition. Less than one year old. Good charging cord. Undamaged screen protector. Posted with
|
|
|
FUJIKURA AFL SPLICEMATE FSM-11S FIBER FUSION SPLICER SYSTEM
Please feel free to contact us for more information- sales@senecascientific.com- 303.525.8479 Fujikura FSM-11S Splicemate Fusion Splicer System. This system has hardly been used since new- less than 250 total splices recorded- it is in excellent condition. Pristine. This is a complete system and comes with everything like you would get new- FSM-11S splicer, CT-30 cleaver, fiber microscope, BRAND NEW $400 battery with charger, tools/accessories, and user manual. Has been fully tested and is working great. Also includes very nice carrying case. Buyer will not be disappointed- you won't find a nicer used system anywhere else. Sale includes 30 day return warranty. No gimmicks, bid with confidence. For more information and detailed specifications of this unit. Please visit the Fujikura website: Packaging: We take time to package properly and ... moresafely to ensure that your item arrives safely. We use professional boxes and professional packaging materials. Domestic Shipping: Shipping in the US will be by Fedex Ground. And will have a flat rate charge of $80. This includes full value insurance fees. Expediated shipping is available if requested. International Shipping: We will ship worldwide. International fee will be a standard rate of $250. Shipping service will be Fedex Economy International or USPS Priority International depending on the destination. Please don't hesitate to contact us if you have further questions- we will respond promptly. Thanks for looking! Seneca Scientific LLC- senecascientific.com) 303.525.8479 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13fef5d1ce0-0xfb-
|
|
|
Fujikura FSM-17R Fusion splicer as part or need repair, can power on
Fujikura FSM-17R Fusion splicer as part or need repair. can power on. a. X- camera trouble. B. don't have top cover. c. don't have Display Screen cover. Products Highlight To serve our customers with wider range of products. We are committed to offering various types of excellent quality fiber-optic products to fulfil different demands of the industry. If you are interested in products which are not shown in our online catalog, please let us know! Email: About Free shipping Items Discount* Total prices more than $150. It is will ship it by DHL(free shipping) It takes approximately 3-7 days(USA) Exchange or Refund* About Goods ship it by BRAM. If not receive items after 21 working please feel free contact us, we are will full payment refund. When you find the item is broken. Please email me, we can full refund or exchange, but buyer ... moreshould return to me, Thank you! Shipping* Hongkon Post Mail: 1) About 8-14 shipping days to USA. UK, Australis(2) About 9-20 shipping days to Cabada(3) About 4-6weeks to West Europe. East Asia(4) About 6-8weeks to other countries* DHL(3-7 Working day to US. Other countries 5-10 working day) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fujikura FSM-40S Fusion Spliber Battery Pack BTR-05 (FSM-16R,FSM-30R,FSM-40S)
It's used Battery pack BTR-05 for Fujikura FSM-40S fusion splicer and cable. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14016aa74f4-0x107-
|
|
|
lcd module for Fujikura FSM50S - Guaranteed to work
LCD module is of same Sharp Make and model as in new splicers. Fully compatible with Fujikura 50s. These are guaranteed to work as good as in new splicer. Delivery will be through Fedex. Discounts available for bulk buying.
|
|
|
Fujikura FSM-40S Arc Fusion Splicer Kit w/ Cleaver ***Free Shipping***
Up for auction is a mint-condition Arc Fusion Fiber Splicer Kit by Alcoa Fujikura Ltd. Kit includes: 1 FSM-40S Arc Fusion Fiber Splicer. 3 sets fiber strippers(various sizes) power cord, instruction manual, fusion splice protection sleeves(2 bags pictured) cleaver, case etc. Everything pictured) Splicer was in perfect working condition when it was stored(last calibrated'01) but I haven't spliced with it since. Power tested. Menu and LCD function perfectly.
|
|
|
Fujikura FSM-50R12 SM MM Fiber Ribbon Fusion Splicer w/ CT-30 Cleaver FSM-50R
Fujikura FSM-50R FSM 50R12 SM MM Fiber Fusion Splicer Low Total Arc Count of 3198! Includes CT-30 Fiber Cleaver. And More! This Fujikura FSM-50R is in great condition as you can see from the pictures. Will need new electrodes soon. The screen has some snow on it. Does not affect operation. New lcd screen can be obtained on eBay for about $400. Includes Main Splicer Unit. CT-30 Cleaver, Fiber Holders: FH-50-900, FH-12, FH-50-6, ADC-11 AC Adapter/Charger, BTR-06 Battery Pack, HJS-02 Hot Jacket Stripper, Carry Case, and all other accessories as pictured. If you have any questions or inquiries. Please do not hesitate to contact us.
|
|
|
Fujikura FSM-17S SM MM Fiber Fusion Splicer w/ CT-30 Cleaver FSM 17S Nice
Fujikura FSM-17S SM MM Fiber Fusion Splicer Low Total Arc Count of 2678! Includes CT-30 Fiber Cleaver. And More! This Fujikura FSM-17S is in great condition as you can see from the pictures. Will need new electrodes soon. Includes Main Splicer Unit. CT-30 Cleaver, ADC-11 AC Adapter/Charger, carry case, and all other accessories as pictured. If you have any questions or inquiries. Please do not hesitate to contact us.
|
|
|
Fujikura FSM-60S Complete Fusion Splicer Kit. In perfect working order
Up for sale is a Fujikura FSM-60S splicer in good condition with some signs of normal use. This splicer kit will include the battery and CT-30 Cleaver. The battery isn't included in the standard splicing kit.
|
|
|
Fujikura TJ-03 Optical Fiber Temporary Joining Kit with Customized Testing Case
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Description, Fujikura TJ-03 Optical Fiber Temporary Joining Kit with Customized Testing Case Used TJ-03 provides a temporary fiber splice for fiber and cable connections to test equipment such as OTDRs. Product Type: Type@ Model/Part No:Custom Our Item ID: 252616 Description Specific Details: This Fujikura TJ-03 Optical Fiber Temporary Joining Tool Kit has a customized case for testing fibers. This kit includes: Fujikura TJ-03 Temporary Joining Tool(magnifying glass not included) 1 Pair of Fujikura FH-12 Fiber Holders, 1 Pair of Sumitomo RHS 12U Fiber Holders, Fujikura HJS-02 Thermal Stripper with power supply, Fujikura CT-04B cleaver, Fujikura MOI-01 Index Matching Gel 10ml bottle(partial) Rugged Carrying Case(customized. See image) Condition: Product Type: Used Terms of sales: ... moreContact Us for Warranty Details Physical Condition: Good Working Condition: N/A(Not Applicable) Tested Condition: Not Tested 15.00 | 24.00 x 24.00 x 24.00 | 0. Manufacturer"s Product Information: Description: The TJ-03 provides a temporary fiber splice for fiber and cable connections to test equipment such as OTDRs. The TJ-03 uses a precision ceramic V-groover to align up to 12 fibers simultaneously. The fibers are prepared for joining by using standard mass fusion fiber preparation tools(fiber holders. Jacket thermal stripper, and cleaver. Using the TJ-03 in conjunction with an OTDR equipped with an optical switch provides rapid one button optical tests up to 12 fibers. Specific Details: | | | Contact, Mailing Address: SurplusEQ 329 W. Melinda Ln. Phoenix AZ 85027 U.S.A. Phone: Toll-Free: 623) 581-9777(877) 967-1904. Business Hours: 7:30am- 4:00pm(Arizona time) Monday to Friday Email: surpluseq.com View our other and. Payment, We accept the following forms of payment: Credit/Debit Cards: Accepted for USA and Canadian eBay transactions pursuant to our eBay Sales Policy* Cards accepted: Visa, MasterCard, Discover Card. And American Expre
|
|
|
Fujikura FSM-05SV Arc Fusion Splicer + Siecor FBC-006 Cleaver
This is used Fujikura FSM-05SV semi-automatic arc fusion splicer. Siecor FBC-006 fiber cleaver, fiber striper, oven, 2 battery chargers, case and spare electrodes. Everything is in good working condition. Fiber Splicing Capability- SM. MM fiber Splice Loss- 0.12 for SM fiber. 0.05 for MM fiber Return Loss- 60dB Fiber Cleave length- 10mm Coating Diameter- 250 or 900 Applicable Protection Sleeve Length- 40mm Dimensions- 205x165x165mm Weight- 1.9kg a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1413598f613-0xf3-
|
|
|
Fujikura FSM 40 S fibre optic fusion splicer and cleaver.
Fujikura FSM 40 s fusion splicer and CT-30 cleaver. This spicer works perfectly and is ready to use. It has seen a fair bit of use but is perfectly serviceable. The general condition is good. The casing shows some wear due to long service. It has over 5000 splices since its last service and has always been a very reliable machine. The door to the heater has been removed for ease of use when splicing but the heater works perfectly. The cleaver works well. The cutting wheel is heavily used but is still serviceable. The small sharps collector has been removed for ease of use when splicing. Included is the instruction manual. Power lead, alcohol dispenser and carry case. Price includes free worldwide shipping. Collection welcome. Winner to pay via PayPal within 24 hrs of auction end. Thanks.
|
|
|
Fujikura CT-07BS High Precision Fiber Cleaver - Excellent - Heavy Duty
Fujikura Cleaver In Excellent Condition. This Unit Will Provide Precision Cleaves For Years To Come. Heavy Duty. I found this item among my parents things and was only able to find out limited information about it. If you are reading this. You likely know MUCH more than I do. The Fujikura CT-07BS fiber cleaver is used for cleaving both single-mode and multi-mode fibers. It has two v-grooves. One for 250 micron o.d. coating over 125 micron bare fiber, and the other is for 900 micron o.d. coating over 125 micron bare fiber. This cleaver delivers consistent splices of less than 0.5 dB loss. The CT-07BS is a rugged self-contained unit designed to offer consistently reliable and accurate cleaves which cannot be affected by operator skill. Item will be shipped with Insurance. Happy Bidding and Good Luck! Thanks! Payment must be received within ... more48 hours of auction closing or item will be re-listed. Thank you.
|
|
|
Fujikura FSM-20 CS II Fusion Splicer With Cleaver, Good Condition, Warranty!!!
Thanks for viewing. This is a Fujikura FSM-20 CSII fusion splicer in good, used condition. It powers up and works just like it should. I will warranty it for 14 days. Check my feedback and bid with confidence. If you have any questions, please call 386-344-3185 8-5 EST. Posted with
|
|
|
Fujikura 70S Fusion Splicer w/ Bells and Whistles
FSM-70SFujikura Single Strand Fusion Splicer Kit FujikuraModel 70S Splicer Machine is comes with: TOTALARC COUNTS: Below 75· CT-30A1-Step Fiber Optic Cleaver· S70ASheath Clamp· SpareSet of New Electrodes· CC30Transit Case with Carrying Strap· ADC-18AC Power Adapter· ADC-14AC Power Cord· BTR-09Battery Pack· DCC-18Battery Charging Cable· QuickReference Guide· VideoInstruction Manual· Madein Japan Alittle info about your Fujikura 70S Fusion Splicer: TheFujikura 70S is the world’s fastest and most robust core alignment fusionsplicer. Incorporatingthe proven ruggedized features pioneered by Fujikura. The 70S has addedautomated and enhanced user control features to increase splicing efficiency. Auser programmable. Automated wind protector expedites the splicing process by automaticallyclosing ... moreto initiate the splice process, and opening upon splice completion. Fullyprogrammable“auto open sheath clamps” open one sheath clamp. After the tensiletest, to prepare the fiber for removal. A new automated“clam shell design” tubeheater applies heat to both sides of the splice protection sleeve resulting ina 14-second shrink time. The result is a total splice process time ofapproximately 21 seconds! Ruggednessand durability are greatly enhance by a mirror-less optical system and"severe-impactresistant" monitor. Battery capacity is now 200 splices/shrinks. Aninnovative transit case doubles as a built-in or mobile workstation and makes splicingeasier than ever before. Features: Automatedand programmable wind protector· 14-secondautomated tube heater· Fullyruggedized for shock. Dust and moisture· Li-Ionbattery with 200 splices/shrinks per charge· 5mm cleave length for splice on connector or small package needs· Sheathclamp or fiber holder operation· On-boardtraining and support videos· Internetsoftware upgrades· Multifunctiontransit case with integrated workstation Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
FUJIKURA CT-04 HIGH PRECISION FIBER OPTIC CLEAVER
The Fujikura CT-04 precision fiber optic cleaver is exceptionally easy to use and offers consistently excellent results. Providing in excess of 24,000 cleaves per circular blade. The CT-04 is a rugged. Self-contained unit designed to offer consistently reliable and accurate cleaves which cannot be affected by operator skill. Applicable optical fibers: Conventional silica optical fiber Fiber count: Up to 12 Fiber plate: AD-07 Bare fiber diameter: 125mm Cleave length: 6-20mm(single fiber) 10mm(ribbon fiber) Cleaving angle: 0.5°(single fiber) Minimum blade life: 12.000 fibers Blade position: 1 height. 12 rotational settings Gently used demonstration model. Offered as is.
|
|
|
Fujikura FSM-30S Arc Fusion Splicer w CT-04B Cleaver
This splicer was used in a R&D clean room environment for its entire life. It has never been‘in the field’ or abused. It is used but in‘like new’ condition. It is fully functional and contains all components to immediately perform extremely low-loss fiber optic splices right out of the box. Total arc count is 4092. Included with the splicer: Operations– Instruction manual Fujukura CT-04B fiber cleaver(in excellent conditiion) Two fiber strippers Two packs of heat shrinkable splice protectors The Fujikura FSM-30S fusion splicer is the new generation automatic core alignment splicer. The FSM-30S utilizes the direct core monitoring Profile Alignment System(PAS) to achieve ultra low loss and very accurate splice loss estimation regardless of fiber quality or age. While smaller and lighter than previous models. The FSM-30S has increased capabilities ... moreand more operating modes. The FSM-30S optical system and microprocessor automatically align the fibers and inspect cleave quality. By using the Eccentricity Correction Function(ECF) The splicer determines the fiber core/cladding eccentricity and automatically compensates for in order to assure precise core alignment of the completed splice. The field-proven performance and reliability of Fujikura core alignment PAS splicers are improved with the new FSM-30S. Features: Modes: single-mode fiber(SM) Multi-mode fiber(MM) cutoff shifted fiber(CS) and Erbium doped fiber(ED) Carbon coated fiber and Titan fiber are also applicable. Fully automatic operation once fibers are set in the fixture Observation of both X and Y axis simultaneously Atmosphere. Humidity and temperature compensation functions provided Mechanical proof test provided Automatically stores the last 100 splice losses together with dates. Optional built-in memory card slot for storing additional splices. Mode field diameter mismatch compensation splicing programs. Suitable for splicing two different fibers(such as DS fiber to Er-doped fiber. SM fiber to MM fiber, etc. Splice loss control function
|
|
|
FUJIKURA FSM-20R ARC FUSION SPLICER FSM-20RSII12
You are bidding on a Used Fujikura FSM-20RSII12 ARC Fusion Splicer We received a load of Fiber Optics test equipment so the history of the unit is unknown Unit has been powered on as shown in pictures. All keys work and we are able to navigate the menus No other testing has been done You will receive unit only as shown in picture. We do not have any accessoried Unit requires a regular power cord for power(not included) Unit is SOLD AS-IS No returns of refund allowed Guaranteed not to be DOA Pictures are of the actual unit you are bidding Please email us with any questions you might have PAYMENT Paypal is the only Method of payment we accept No Exceptions! SHIPPING All items are shipped via UPS or USPS Items are usually shipped the same day or the next business day All international orders are shipped via USPS Priority Mail or Express Mail ... moreWe do not ship on Saturdays or Sunday
|
|
|
Fujikura CT-07 High Precision Fiber Cleaver
Up for bid is a'Fujikura CT-07 High Precision Fiber Cleaver' Shows very minimal signs of wear. The CT-07 precision fibre optic cleaver is exceptionally easy to use and offers consistently excellent results. Providing in excess of 24, 000 cleaves per circular blade. The CT-07 is a rugged. Self-contained unit designed to offer consistently reliable and accurate cleaves which cannot be affected by operator skill. The Fujikura CT-07 fiber cleaver is used for cleaving both single-mode and multi-mode fibers. It has two v-grooves. One for 250 micron O. D. Coating over 125 micron bare fiber, and the other is for 900 micron O. D. Coating over 125 micron bare fiber. This cleaver delivers consistent splices of less than 0. 5 dB loss.
|
|
|
Fujikura Fusion Splicer Ribbon Fiber Holders FH-025-6
Fujikura Fusion Splicer Ribbon Fiber Holders FH-025-6 Sold as pictured Posted with eBay Mobile*For all test equipment items; we test to the best of our abilities. We receive mass amounts of test equipment. So we are not experts on every single item, but we are happy to answer questions to the best of our abilities. We do offer a 14-day return policy or replacements(when available) We recommend you test the items within the 14-day window to ensure the items are working properly, but also in case there are issues, you can receive your replacement or refund. Any issues that occur after the 14-day window of receiving the item may not be covered. If items have accessories, we include pictures in the listing(you receive all/only what is pictured) Please feel free to message with any questions you may have prior or after purchase. Thank You!
|
|
|
Fujikura FSM-30R Fiber Fusion Splicer with accessories
You are bidding on a used Fujikura FSM-30R12 Fiber Fusion Splicer with 3029 total lifetime ARCS. This auction is for the FSM-30R12 Splicer. Fujikura HJS-02 Hot Jacket Stripper, Fujikura ADC-07 AC Module/Charger, 2 Fujikura BTR-04 Battery Packs with all necessary cords, Fujikura FH-12 FH-6 and FH-250 fiber sleds, Sumitomo FC-6M Fiber Cleaver, Sumitomo JR-22 Fiber Stripper, Instruction Booklet, Hard Carry Case, Extra set of Electrodes, Extra Cleaver Blade, Fiber Sleeves, Alcohol Wipes, Dry Wipes and Magnify Glass attachment. Please feel free to email me with any questions. This item has been professionally tested and is working perfect. This item is surplus no returns. Manufactured 4/98. Authentic USA model.
|
|
|
Fujikura FSM16S Fiber Optic Fusion Splicer , shipping via DHL
Fujikura FSM16S Fiber Optic Fusion Splicer. Shipping via DHL product information Description Applicable Fibers: SM(Single mode) GI(Graded Index) and DS(Dispersion shifted) complying with ITU-T recommendation G.652, G.651 and G.653 respectively. Number of Fibers to be spliced: Single to Single. 2 to 2, 4 to 4 fibers irrespective of ribbon or bundle configuration. Actual Average Splice Loss: 0.05 dB with SM fiber. 0.03 dB with GI fiber and 0.08 dB with DS fiber. Return Loss: 60 dB. Features Compact and suitable for aerial splicing, High wind shielding, Fully automatic operation and user friendly, AC/DC converter works as both AC/DC converter and battery charger High resolution 5 inch color monitor Automatic altitude compensation Clean NiMH battery Package 1 x Fujikura FSM-30S Arc Fusion Splicer 1 x Power Cord 1x power adapter ADC-07. 1x CT-07 ... moreoptical fiber cleaver. 1 pair reserve electrode 50% NEW Notice To serve our customers with wider range of products. We are committed to offering various types of excellent quality products to fulfil different demands of the industry. If you are interested in products which are not shown in our online catalog. Please let us know! Shipping* Hongkon Post Mail: 1) About 8-14 shipping days to USA. UK. Australis(2) About 9-20 shipping days to Cabada(3) About 4-6weeks to West Europe. East Asia(4) About 6-8weeks to other countries*Singapore Post Mail: 1) About 15-25 shipping days to USA. UK. Australis(2) About 15-30 shipping days to Cabada(3) About 4-6weeks to West Europe. East Asia(4) About 6-8weeks to other countries* DHL(3-7 Working day to US. Other countries 5-10 working day） Ship it via ePacket(USPS) Delivery times it is 10-21 working day. Free shipping and Discount*Total QTY more than 5 items. It is will ship it by DHL or FEDEX(free shipping) It takes approximately 3-7 days(USA) Exchange or Refund* About Goods ship it by BRAM. If not receive items after 21 working please feel free contact us, we are will full payment refund. When you find
|
|
|
Fujikura FSM-15S Fiber Optic Fusion Splicer , shipping via DHL
Fujikura FSM15S Fiber Optic Fusion Splicer. Shipping via DHL product information Fujikura FSM15S Fiber Optic Fusion Splicer The FSM-15S Arc Fusion Splicer is designed to splice Singlemode and Multimode optical fibers. The Fusion Splicer is equipped with an internal 3 inch LCD monitor for viewing the splicing process and a built in tube heater for heating the splice protection sleeves. Automated splicing and loss estimation is achieved by an image processing feature of the microprocessor 50% New Notice To serve our customers with wider range of products. We are committed to offering various types of excellent quality products to fulfil different demands of the industry. If you are interested in products which are not shown in our online catalog. Please let us know! Shipping* Hongkon Post Mail: 1) About 8-14 shipping days to USA. UK. Australis(2) ... moreAbout 9-20 shipping days to Cabada(3) About 4-6weeks to West Europe. East Asia(4) About 6-8weeks to other countries*Singapore Post Mail: 1) About 15-25 shipping days to USA. UK. Australis(2) About 15-30 shipping days to Cabada(3) About 4-6weeks to West Europe. East Asia(4) About 6-8weeks to other countries* DHL(3-7 Working day to US. Other countries 5-10 working day） Ship it via ePacket(USPS) Delivery times it is 10-21 working day. Free shipping and Discount*Total QTY more than 5 items. It is will ship it by DHL or FEDEX(free shipping) It takes approximately 3-7 days(USA) Exchange or Refund* About Goods ship it by BRAM. If not receive items after 21 working please feel free contact us, we are will full payment refund. When you find the item is broken. Please email me, we can full refund or exchange, but buyer should return to me, Thank you! Engineered for professional eBay sellers！ RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1435a3d29a6-0xf5-
|
|
|
Fujikura FSM-30S Fiber Optic Fusion Splicer , shipping via DHL
Fujikura FSM-30S Fiber Optic Fusion Splicer. Shipping via DHL product information Description You are bidding an used Fujikura FSM-30S Fiber Optic Fusion Splicer.it's in good condition. For more detailed information. Pls refer to the pictures or contact me. NOTE: there is a little flaw in the screen. As the picture shown. The Fujikura FSM-30S fusion splicer is the new generation automatic core alignment splicer. The FSM-30S utilizes the direct core monitoring Profile Alignment System(PAS) to achieve ultra low loss and very accurate splice loss estimation regardless of fiber quality or age. While smaller and lighter than previous models. The FSM-30S has increased capabilities and more operating modes. The FSM-30S optical system and microprocessor automatically align the fibers and inspect cleave quality. By using the Eccentricity Correction ... moreFunction(ECF) the splicer determines the fiber core/cladding eccentricity and automatically compensates for in order to assure precise core alignment of the completed splice. The field-proven performance and reliability of Fujikura core alignment PAS splicers are improved with the new FSM-30S. Features Arc power is optimized automatically by special arc power analysis software. Automatic compensation for temperature and humidity variation. As well as for atmospheric pressure/altitude. Operating modes provided to create an in-line attenuator Mode field diameter compensation program(i.e. To splice Erbium doped fiber to DS. Splicing modes added for cutoff-wavelength-shifted(CS) fiber. In addition to SM, and DS fiber. Built-in tube heater is programmable for heating profile and sleeve length Menu driven for all functions including maintenance. Tube heater programmability and other options. Package 1 x Fujikura FSM-30S Arc Fusion Splicer 1 x Power Cord 50% NEW Notice To serve our customers with wider range of products. We are committed to offering various types of excellent quality products to fulfil different demands of the industry. If you are interested in products which
|
|
|
fujikura fsm-11s optical fiber + tools and acessories
Hello. Excellent opportunity to buy a fiber optic fusion machine and some tools and accessories in very good working condition. The yellow box that storage's everything has some scratches only. The price its with all the tools and accessories in the pictures. Charger is the european version. It works on 220v, for US you will need a 110v. This will be sent in registered mail with track number. It will be sent after payment. I do not accept returns. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Any questions send message.
|
|
|
Fujikura FSM-20RSII12 Fusion Splicer for up to 12 Ribbon Fiber Splicing
FUJIKURA Fujikura FSM-20RSII12 Fusion Splicer for up to 12 Ribbon Fiber Splicing only 500 Splice Counts on Unit! The FSM-20RSII12 can splice from 1 to 12 fibers at once depending on the which fiber holders are used. Fiber Holders not included) Package Includes: Fujikura FSM-20RSII12 Fusion Splicer for up to 12 Ribbon Fiber Splicing x 1 More questions. Please email us Terms: Shipping to a California address will add sales tax; International buyers are responsible for any possible customs tax or brokerage fees 14 day no D.O.A. Guaranteed Ship only to" Confirmed address" if paid by credit card through Paypal. Unconfirmed shipping address. Please use check or wire transfer. Local pick up is not offered. r stwflwar
|
|
|
FUJIKURA HJS-01 Hot Jacket Stripper For stripping fiber ribbon up to 12 fibers
FUJIKURA FUJIKURA HJS-01 Hot Jacket Stripper For stripping fiber ribbon up to 12 fibers for Fujikura FSM-20RSII12 Fusion Splicer Package Includes: FUJIKURA HJS-01 Hot Jacket Stripper For stripping fiber ribbon up to 12 fibers x 1 More questions. Please email us Terms: Shipping to a California address will add sales tax; International buyers are responsible for any possible customs tax or brokerage fees 14 day no D.O.A. Guaranteed Local pick up is not offered. r stwflwar
|
|
|
Fujikura FSM-20CS II Arc Fusion Splicer for SM/MM optical fibers/ CT-04 Cleaver
Seldom used Arc Fusion Splicer in excellent condition. Profile Alignment System(PAS) guarantees low loss splices. For splicing SM and MM fibers(10 splicing programs each) Unit has been in climate controlled storage for several years. Recently tested(see photos) and found to be in working order. Unit comes with Fujikura CT-04 Fiber cleaver, which is also in excellent condition.
|
|
|
Fujikura FSM-60S Fusion splicer, Used one, arc count only 4096
Fujikura Fusion Splicer FSM-60S Low arc count: 4096 This instrument is an excellent working condition Fujikura Fiber Fusion Splicer FSM-60S Kit with lower arc(Total only 4096) Very good condition CT-30 fiber cleaver. So the item seems very new. The pictures are of the actual units. Total Arc Count: 4096 Last Maintenance: 2012.12.11 Next Maintenance: 2013.12.11 If you have any questions. Please send an email to: eanchou80@hotmail.com Condition excellent working condition. Like a new Warranty 3 months warranty from us. Shipment Package Includes: Fusion Splicer Main body FSM-60S· carrying case· Fujikura Fiber cleaver CT-30· Charge Battery· Alternating Current wire ACC-04· Alternating Current Charger ADC-07· Wire of Battery Charger DCC-08 Buyer will pay $220.00 for shipping cost(Shipping will be UPS or Fedex. Received ... moreonly for 3-5 business days) Specifications· Fiber Splicing Capability: SM. MM, NZ-DS(non-zero dispersion-shifted) DS, CS(cutoff shifted) and Erbium-doped fiber· Splice Loss: 0.02dB with SM fiber. 0.01dB with MM, and 0.03dB with NZ-DS fiber(typical) 0.04db with DS fiber· Splice Sleeve Compatibility: both 60mm and 40mm sleeves. As well as micro sleeves· Atmospheric Compensation Function: fully automatic up to 3.500 meters(11,500 feet) Automatic temperature and humidity compensation· Operating Temperature: 10 o C to +50 o C· Storage Temperature: 40 o C to +80 o C· Dimensions(W x D x H) 172mm x 186mm x 180mm· Weight: 4.9 kg( 10.8 lbs) Attenuation Capability: Programmable from 0.1dB to 15dB;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144425134e4-0xff-
|
|
|
Used Fujikura FSM-15S-A Fiber optical fusion splicer
Used Fujikura FSM-15S-A Fiber optical Fusion splicer. Can good working. a.mainbody. FSM-15S-A 1pc b.AC adaper. 1pc. In stock: 2pcs. Products Highlight To serve our customers with wider range of products. We are committed to offering various types of excellent quality fiber-optic products to fulfil different demands of the industry. If you are interested in products which are not shown in our online catalog, please let us know! Email: ebaysale201005@gmail.com About Free shipping Items Discount* Total prices more than $150. It is will ship it by DHL or FEDEX(free shipping) It takes approximately 3-7 days(USA) Exchange or Refund* About Goods ship it by BRAM. If not receive items after 21 working please feel free contact us, we are will full payment refund. When you find the item is broken. Please email me, we can full refund or exchange, but ... morebuyer should return to me, Thank you! Shipping* Hongkon Post Mail: 1) About 8-14 shipping days to USA. UK, Australis(2) About 9-20 shipping days to Cabada(3) About 4-6weeks to West Europe. East Asia(4) About 6-8weeks to other countries* FEDEX/DHL(3-7 Working day to US. Other countries 5-10 working day) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fujikura FSM-16S SM MM Fiber Fusion Splicer w/ FC-6S Cleaver FSM 16S
ebay template The Following Items Are Included: Fujikura FSM-16S SM MM Fusion Splicer(BC# 01795) Arc Count: 4.670 USFiberOptic USF-21C High Precision Fiber Optic Cleaver Clauss CFS-2 Fiber Optic Stripper 6 Month Fusion Splicer Care Kit FS6MC: 4oz Flip Jar Of 99% Alcohol(50) Non-Lint Dry Wipes(6) Fiber Optic Wipes w/ 99% Alcohol 2oz Pump Fast Evaporating Mirror Spray(25) Camera Swabs(25) V-Groove Swabs Fujikura ADC-07 AC Adapter/Battery Charger Protective Screen Cover Power Cord User Manual On CD-ROM Hard Carrying Case w/ Strap BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fujikura/ AFL FSM-16S SM& MM Fiber Fusion Splicer with built-in Heat Shrink Oven This Unit Has A Very Low Total Arc Count Of Only 4.670! Includes 6 Month Fusion Splicer Care Kit(FS6MC) 4oz Flip Jar Of 99% Alcohol- 50) Non-Lint ... moreDry Wipes- 6) Fiber Optic Wipes w/ 99% Alcohol- 2oz Pump Fast Evaporating Mirror Spray- 25) Camera Swabs- 25) V-Groove Swabs Includes USFiberOptic USF-21C High Precision Fiber Optic Cleaver. Hard Carrying Case& Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty The technology embodied in the FSM-16S provides unprecedented utility in harsh outdoor splicing environments. Altitude/pressure compensation is provided to ensure proper arc conditions in extreme environments. In addition. The wind protector ensures a stable arc in cross winds in excess of 30 mph. The 5” color anti-refl ective LCD monitor provides excellent visibility during splicing operations. With the small size, light weight and additional docking-bay for power modules, the FSM-16S is reliable for use in a variety of field scenarios. Features: Fully automatic with loss estimation Simultaneous X-Y view with 110X magnifi cation Extremely small and light weight to ensure fi eld portability Ergonomic design for taut-sheath splicing Specifications: Fiber Splicing Capability SM. MM, NZ-DS fibers Splice Loss 0.05dB for SM. 0.02dB
|
|
 |