In 
 
Order by: 
Available to: 
Price: 
 - 
$
2150.00
Buy It Now
$55.00 Shipping
Condition: Used
Location: Las Vegas, United States
The test signal is separated from incident signals by a fully integrated test set. The response is displayed in a variety of useful formats. Optional ... morestep attenuator for extended source output power range.
$
98.30
Buy It Now
$10.18 Shipping
Condition: Neu
Location: China
The hardware block diagram of NanoVNA-F is as follows. At 600M-1GHz, the dynamic range of S11 is 40dB (standing wave ratio is less than 1.02). Performance ... morecomparison, E5071C four-port vector network vs NanoVNA-F.
$
103.99
Buy It Now
Free Shipping
Condition: New
Location: China
Latest firmware is V0.2.0 beta. Firmware v0.2.0 beta update instructions Performance comparison, E5071C four-port vector network vs NanoVNA-F. 19.0Wh ... more(about 5000mAh after conversion) large capacity lithium battery.
$
179.82
Buy It Now
Free Shipping
Condition: New
Location: China
Up to 90dB dynamic range (1GHz). 4GHz frequency range. Battery: with 3200mAh lithium battery. 1 x Micro USB Data Cable. 2 x 50cm N male to male RG142-PUR ... moreRF cable. USB interface: USB Type-B. RF port: SMA (not RP-SMA!).
$
7197.30
Buy It Now
Free Shipping
Condition: Used
Location: Malaysia
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used 81110A 330 MHz Pulse/ Pattern Generator 81112A (HP/Agilent). ... moreKeysight Used N4952A Error Detector Remote Head Opt.
$
4.68
Buy It Now
$3.00 Shipping
Condition: New
Location: China
1 x NanoVNA host (with 450mAh battery). NanoVNA Testboard Vector Network. Power: USB 5V 120mA, built-in 400mAh battery, maximum charging current. This ... moretest board contains a DIP test circuit compatible with VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added.
$
770.00
Buy It Now
$40.00 Shipping
Condition: New
Location: MELKSHAM, United Kingdom
As manufacturer of the DG8SAQ Low Cost Vector Network Analyzer, SDR-Kits is committed to supporting Users, providing advice and technical support, regular ... moresoftware updates and facilitating the DG8SAQ VNWA Forum.
$
4250.00
Buy It Now
$49.00 Shipping
Condition: Used
Location: Terrell, United States
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++.
$
10490.00
Buy It Now
$375.00 Shipping
Condition: Used
Location: Israel
Agilent Keysight 8720ES. 50MHz to 20GHz Network Analyzer. Fully tested, all function perfect. options 1D5 010.
$
160000.00
Buy It Now
Free Shipping
Condition: Used
Location: Israel
Keysight N5222B, 26.5GHz, 4-Ports. "PNA" series Vector Network Analyser, incl. Power cord. Rear panel cover. Front panel cover. Unit includes an extended ... morepre-paid warranty until 29-SEP-2023. ============================================.
$
98.60
Buy It Now
Free Shipping
Condition: New
Location: China
It is a portable vector network analyzer up to 3GHz. Customized high-performance SS405 cable provides good amplitude and phase stability. - Battery: 3000mAh ... morelithium ion (with test report). - Battery connector: JST-XH 2.54mm.
$
2350.00
Buy It Now
$44.50 Shipping
Condition: Used
Location: United States
Agilent HP 85036B Mechanical Calibration Kit DC to 3 GHz Type-N 75 Ohm The Agilent 85036B calibration kit contains precision 75 ohm type-N male fixed ... moretermination and a one-piece 75 ohm type-N open/short circuit. These standards are used to calibrate Agilent network analyzers for measurement of devices with 75 ohm type-N connectors. The kit is specified from dc to 3 GHz. Good used condition please see the picture. 85036-60013 N Type Male to N Type Male Adapter 85036-60015 N Type Female to N Type Male Adapter 85036-60014 N Type Female to N Type Female Adapter 909E 00909-60019 Type N Male Termination 909E 00909-60020 Type N Female Termination 85036-60011 N Type Female Short 85036-60012 N Type Male Short 85032-60007 N Type Male Open 85032-20001 N Type Female Open 85036-60010 75 Ohm Female Center Conductor for Open. If your not happy with your item return it an I will refund.
$
21950.00
Buy It Now
$95.00 Shipping
Condition: Used
Location: Newbury Park, United States
N9917A Bandwidth: 30KHz ~ 18 GHz. Analyzer (CAT), Vector Network Analyzer (VNA, optional). Cable and Antenna Analyzer (CAT), Vector Network Analyzer (VNA, ... moreoptional). Spectrum Analyzer (optional). 30 kHz to 18 GHz.
$
69.00
Buy It Now
Free Shipping
Condition: New
Location: China
S-A-A-2 designed by OwOComm, a portable vector network analyzer up to 3GHz. Battery: SAA2 2000mAh lithium ion; SAA2N 3000mAh lithium ion. Battery connector: ... moreJST-XH 2.54mm. SAA-2/NanoVNA V2 uses a similar user interface as NanoVNA, but adopts a different technical architecture.
$
94.89
Buy It Now
Free Shipping
Condition: New
Location: China
1 NanoVNA V2. Sweep rate: 100 points / second. Maximum sweep points (on device): 201. Maximum sweep points (USB): 1024. CNC Aluminium Swivel Arm Mount ... moreBall Joint Stand Adapter for GoPro Hero 8/7/6/5.
$
400.40
Buy It Now
Free Shipping
Condition: New
Location: China
SV4401A Machine 1. - Frequency range: 50kHz~4.4GHz. - 50KHz-4.4GHz handheld vector network analyzer. - Battery: two built-in 18650 lithium batteries (3.6V/3350mAh ... morex 2). - Battery life: 4 hours (50% screen brightness).
$
3464.00
Buy It Now
Free Shipping
Condition: New
Location: Santa Rosa, United States
Keysight Software upgrade. N5230C FREQUENCY OFFSET MODE (OPT 080). Keysight Software Upgrade N5230C 4-Port Capability (Opt 550) (Agilent N5230C). Keysight ... moreSoftware Upgrade N5230A 4-Port Capability (Opt 550) (Agilent N5230A).
$
112696.35
Buy It Now
Free Shipping
Condition: Used
Location: Malaysia
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used N9923A FieldFox RF vector network analyzer 6 GHz - Loaded. Keysight ... moreUsed N5182A MXG vector signal generator 100 kHz to 3 GHz (Agilent).
$
98.60
Buy It Now
Free Shipping
Condition: New
Location: China
It is a portable vector network analyzer up to 3GHz. Customized high-performance SS405 cable provides good amplitude and phase stability. - Battery connector: ... moreJST-XH 2.54mm. - It uses a user interface similar to NanoVNA, but adopts a different technical architecture.
$
62995.00
Buy It Now
$85.86 Shipping
Condition: Seller refurbished
Location: Oceanside, United States
Keysight N5232A /010 /080 /216. Featurs of the Keysight N5232A Network Analyzer include Applications for the N5232A include PNA-L Network Analyzer 300kHz-20GHz. ... moreSignal integrity. 300 kHz to 20 GHz Frequency Range.
$
37500.00
Buy It Now
$195.00 Shipping
Condition: Used
Location: Studio City, United States
Not a problem. Internal RF source step attenuator allows for output power range greater than 80 dB. If you don't see it in the pictures, it is not included.
$
500.00
Buy It Now
$150.00 Shipping
Condition: Used
Location: South Korea
HP 85032-60011 50 Ohm T ype-N(male) Precision Coaxial Combination Open/Short for Network Analyzer Calibration. Originally part of 85032E calibration kit. ... moreIn Excellent Condition. Photos are of this unit. S/N 02666
$
58842.00
Buy It Now
Free Shipping
Condition: Used
Location: United States
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used N4375B Lightwave Component Analyzer(Agilent). Keysight Used N9320B ... moreSpectrum analyzer, 3 GHz. Keysight Used N7768A Optical Attenuator for Multimode Fiber 4Ch Option 062.
$
299.00
Buy It Now
$27.00 Shipping
Condition: New
Location: Kazakhstan
With it, service centers and repair crews can carry out RF analysis cable and antenna when carrying out commissioning or repair work. SPECIFICATIONS ARINST ... moreVR 23-6200 MHz 23-6200 MHz. The frequency resolution.
$
13830.60
Buy It Now
Free Shipping
Condition: Used
Location: Malaysia
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used E5061B Network Analyzer 5 Hz to 3 GHz - 3L5. Keysight Used DSOX3012A ... moreOscilloscope, 2-channel, 100MHz. Precision 2-port microwave ECal module with high accuracy.
$
13500.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Creedmoor, United States
Very good working condition Network Analyzer S/N MY42401437.
$
46.28
Buy It Now
$4.99 Shipping
Condition: New
Location: China
1 x NanoVNA host (with 450mAh battery). Power: USB 5V 120mA, built-in 400mAh battery, maximum charging current. Battery: 1 lithium battery, 3000mAh (included). ... morePortable and compact, easy to use and carry.
$
45000.00
Buy It Now
$475.00 Shipping
Condition: Used
Location: South Korea
240,F20,P04. Included Accessories.
$
2500.00
Buy It Now
$122.05 Shipping
Condition: For parts or not working
Location: Boulder, United States
The family comprises the four Vector Network Analyzers ZVRE and ZVR as well as ZVCE and ZVC which extend the frequency range to 8 GHz. ZVR and ZVC are ... moreuniversal models. ZVR and ZVC are the allrounders of the family and suitable for applications in R+D and production no matter how sophisticated.
$
102.49
Buy It Now
Free Shipping
Condition: New
Location: China
Performance comparison, E5071C four-port vector network vs NanoVNA-F. 19.0Wh (about 5000mAh after conversion) large capacity lithium battery. At 600M-1GHz, ... morethe dynamic range of S11 is 40dB (standing wave ratio is less than 1.02).
$
95.52
Buy It Now
$5.88 Shipping
Condition: Neu
Location: China
The hardware block diagram of NanoVNA-F is as follows. At 600M-1GHz, the dynamic range of S11 is 40dB (standing wave ratio is less than 1.02). Performance ... morecomparison, E5071C four-port vector network vs NanoVNA-F.
$
185.97
Buy It Now
$6.11 Shipping
Condition: Neu
Location: China
4GHz frequency range. Battery: with 3200mAh lithium battery. USB interface: USB Type-B. 1 x Micro USB Data Cable. Scanning rate: 400 points/sec (f >= ... more140 MHz), 200 points/sec (f
$
26403.00
Buy It Now
Free Shipping
Condition: Used
Location: Malaysia
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used N9020A MXA Signal Analyzer 10 Hz - 26.5 GHz - Windows7. Keysight ... moreUsed N2803A Probe Amplifier, InfiniiMax III 30 GHz.
$
185000.00
Buy It Now
$495.00 Shipping
Condition: Used
Location: Culver City, United States
Agilent Keysight E5071C 300 kHz - 14 GHz, 4 Port Network Analyzer w/ Option 4D5. Agilent N5230A 300 kHz - 20 GHz Network Analyzer w/ Opts 010/080/245 ... more- MFG CAL'D. 10 MHz to 26.5 GHz. Low noise floor of -114 dBm at 10 Hz IFBW.
$
9100.00
Buy It Now
$25.24 Shipping
Condition: Used
Location: Vista, United States
The TTR506A covers the 100 kHz to 6 GHz frequency range. Remote programming is done via a SCPI command set compatible with legacy models. Features and ... morespecifications of the Tektronix TTR506A VNA include.
$
116.22
Buy It Now
$4.59 Shipping
Condition: Neu
Location: China
1 x NanoVNA host (with 450mAh battery). NanoVNA Testboard Vector Network. Am 21.12.20 hat der Verkäufer die folgenden Angaben hinzugefügt Power: USB 5V ... more120mA, built-in 400mAh battery, maximum charging current.
$
2200.00
Buy It Now
$23.23 Shipping
Condition: Used
Location: Rocklin, United States
Hours of Operation. Our 30,000 Sq.Ft. Accuracy:
$
5500.00
Buy It Now
$61.87 Shipping
Condition: Used
Location: Burnsville, United States
Part/Model Nbr: 4396B. Network Spectrum Analyzer (# 1). Unit Powers On - No Other Testing. 100 KHZ - 1.8 GHZ, 2 HZ - 1.8 GHZ. The pictures provided are ... moreof the item unless otherwise stated.
$
85.72
Buy It Now
$6.11 Shipping
Condition: Neu
Location: China
Eigenschaften:: Port SWR :
$
12000.00
Buy It Now
Condition: Used
Location: Merced, United States
Model: N11U. — Supports up to 576 25G or 10G ports, 288 50G ports, 144 100G or 40G ports, 48 200G, or 24 400G Ethernet ports per chassis. Chassis design ... more&form factor. Native support for hard drive, and power supplies.
$
110.81
Buy It Now
Free Shipping
Condition: New
Location: China
It uses a user interface similar to NanoVNA, but adopts a different technical architecture. It is a portable vector network analyzer up to 3GHz. Customized ... morehigh-performance SS405 cable provides good amplitude and phase stability.
$
790.88
Buy It Now
Free Shipping
Condition: New
Location: China
1 x VNA6000P Vector Network Analyzer. NA6000P is a 1MHz-6GHz portable dual-port vector network analyzer with built-in display. Usually it cost about 35USD-50USD. ... more- 1 x USB Charging Cable. - N.W.: 0.45kg.
$
64500.00
Buy It Now
$245.00 Shipping
Condition: Seller refurbished
Location: Studio City, United States
The Agilent E8363C Network Analyzer is part of Agilent's PNA series of network analyzers (Performance Network Analyzers) and features the highest levels ... moreof accuracy for your critical needs. The Agilent E8363C has a wide frequency range of 10 MHz to 40 GHz and has 2-Ports (4 with the N4420B Test Set) and 4 Receivers.
$
14221.20
Buy It Now
Free Shipping
Condition: Used
Location: United States
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used DSAX93204A Digital Signal Analyzer - 33 GHz 80/40 GSa/s (Agilent). ... moreKeysight Used N9030A PXA Signal Analyzer, 3 Hz - 8.4 GHz (Agilent) - WinXP.
$
5799.00
Buy It Now
$130.00 Shipping
Condition: Used
Location: China
$
17950.00
Buy It Now
$115.00 Shipping
Condition: Used
Location: Newbury Park, United States
The N4690D is a precision 2-port ECal module that supports 50-ohm type-N connectors up to 18 GHz. Select either female-female, male-male, or female-male ... moreconnectors. The plastic storage case for the N4690D is included for securing your ECal module and accessories.
$
48.79
Buy It Now
$4.59 Shipping
Condition: Neu
Location: China
1 x NanoVNA host (with 450mAh battery). 1 SAA-2N host. 2 500mm N-Type-Male-Male-RG142-PUR-HF-Cable. Am 04.03.21 hat der Verkäufer die folgenden Angaben ... morehinzugefügt Power: USB 5V 120mA, built-in 400mAh battery, maximum charging current.
$
2750.00
Buy It Now
$345.00 Shipping
Condition: Used
Location: Israel
Up for auction today is: HP/ AGILENT 8753ES 30KHz to 3GHz S PARAMETER NETWORK ANALYZER W/ OPTION 011 14 Day Right of Return Auction terms- Please read ... morebefore placing your bid. Normal 0 false false false MicrosoftInternetExplorer4 Disclaimers The pictures include everything that you will get. Unless specifically noted in the description. If you do not see it in the photo or in the description block above. It is not included in the auction. Talented Technologies is not responsible for international customs fees. We do not ship to P.O. Boxes or unverified Paypal addresses. And we reserve the right not to sell to eBay buyers with excessive negative feedback. Product condition definitions and terms“x day money back” not valid if item has been. In any form, tampered with) Item guaranteed to be operational for x days from receipt. Should the item fail to be operational, it may be sent back at the expense of the buyer to be tested by our staff. Refund issued at our discretion based on those tests. Shipping costs cannot be refunded. Return policy applies only to buyers within the United States. x day Warranty" not valid if item has been. In any form, tampered with) Item guaranteed to be operational for x days from receipt. Should the item fail to be operational, it may be sent back at the expense of the buyer to be tested by our staff. Item repair or replacement issued at our discretion based on those tests. If item repair or replacement is not available, a refund will take place. Shipping costs cannot be refunded. Warranty applies only to buyers within the United States. Payment Payment must be made within 4 days of auction close. We reserve the right to cancel the transaction and file an Unpaid Item Claim after 4 days. Buyers in California please add 8.00% sales tax to all purchases. If you are a reseller and want to request a resellers' tax exemption. Please ask us for our BOE form which you will need to fill out, sign and fax it to us. We'll send you a new invoice with the sales tax removed. We accept:
$
5850.00
Buy It Now
$95.00 Shipping
Condition: Used
Location: Newbury Park, United States
Features of Rohde & Schwarz ZVL3-75 R&S ZVL network analyzers are a new addition to the extended family of R&S Vector Network Analyzers. Especially interesting ... moreis the combination of ZVL with the spectrum analysis option as well as the DC/battery option.
$
79500.00
Buy It Now
$375.00 Shipping
Condition: Seller refurbished
Location: Newbury Park, United States
Agilent N5224A 10 MHz - 43.5 GHz PNA Microwave Network Analyzer - Keysight CAL'D. Keysight E5061B 5Hz - 3GHz Network Analyzer OPTS 005/006/010/020/3L5/721/731/1E5. ... moreNot a problem. 140 dB; With direct receiver access: typ.
$
9950.00
Buy It Now
$85.00 Shipping
Condition: Used
Location: Newbury Park, United States
Agilent's FieldFox RF vector network analyzer is the world's most accurate handheld VNA. Standard accessories include AC/DC adapter, battery, and soft ... morecarrying case. Vector network analyzer (VNA) 2 MHz to 4/6 GHz.
$
79900.00
Buy It Now
Free Shipping
Condition: Used
Location: Altamonte Springs, United States
Agilent HP Keysight E8364B PNA Network Analyzer and N4421B. 10MHz - 50GHz. BRL Test is corporate friendly. We understand the traditional acquisition and ... morecapital approval process. View our huge product catalog on our website by googling BRL Test.
$
1899.99
Buy It Now
$220.99 Shipping
Condition: Used
Location: Phoenix, United States
1EC: 75 ohms - Provides 75 ohm system impedance. Both TCP/IP and FTP protocols are supported. Level Accuracy: ±1.0 dB, ±1.5 dB Option 1EC. CRT Formats: ... moreSingle-channel, dual-channel overlay (both traces on one graticule), or dual-channel split (each trace on separate graticules).
$
35444.00
Buy It Now
Free Shipping
Condition: Used
Location: Malaysia
Keysight Used. KeysightCare Assured (includes Keysight Extended Warranty). Keysight Used DSAX91304A Digital Signal Analyzer - 13 GHz 80/40 GSA/S (Agilent). ... moreKeysight Used N4690D 18 GHz 2-port type-N 50 ohm ECal module Opt.
$
3148.80
Buy It Now
Free Shipping
Condition: New
Location: Santa Rosa, United States
Keysight Software upgrade. N5230A SCALAR CONVERTER (OPT 082). Keysight Software Upgrade N5230A Frequency Offset (Opt 080) (Agilent N5230A). Keysight Software ... moreUpgrade N5230A 4-Port Capability (Opt 550) (Agilent N5230A).
$
69995.00
Buy It Now
$84.73 Shipping
Condition: Seller refurbished
Location: Oceanside, United States
Agilent N5230C /010 /080 /082 /420. PNA-L Network Analyzer 10MHz-40GHz. The PNA-L is designed for your general-purpose network analysis needs and priced ... morefor your budget. 420 - 10 MHz to 40 GHz, 2 port, standard test set.
$
6950.00
Buy It Now
$89.90 Shipping
Condition: Used
Location: Newbury Park, United States
Agilent's FieldFox RF vector network analyzer is the world's most accurate handheld VNA. Standard accessories include AC/DC adapter, battery, and soft ... morecarrying case. This allows users to quickly check system performance and identify potentially degraded system components simultaneously, doubling the efficiency compared to traditional testers.
$
178.73
Buy It Now
$3.14 Shipping
Condition: Neu
Location: China
Up to 90dB dynamic range (1GHz). Am 26.05.2022 hat der Verkäufer die folgenden Angaben hinzugefügt 4GHz frequency range. Am 27.05.2022 hat der Verkäufer ... moredie folgenden Angaben hinzugefügt 2 x 50cm N male to male RG142-PUR RF cable.
$
187.60
Buy It Now
Free Shipping
Condition: New
Location: China
Up to 90dB dynamic range (1GHz). 4GHz frequency range. Battery: with 3200mAh lithium battery. 1 x Micro USB Data Cable. 2 x 50cm N male to male RG142-PUR ... moreRF cable. USB interface: USB Type-B. RF port: SMA (not RP-SMA!).
$
2499.00
Buy It Now
Condition: Used
Location: Merced, United States
Model: 8753D, 85046B. 85046B Specfcatons 8753D Specfcatons t was kept n calbrated condton untl 2015 and then mothballed. t ncludes the nterface unt opton. ... moreJust reach out and ask us to schedule.
1 2 3 4 5 6 7 8
 In 

Former Listings  
 
Topcon TP-L4B Pipe Laser System - Professional Calibration Included
SquareTrade © AP6.0 Topcon Red Beam Pipe Laser System model TP-L4B in good working order. Includes the transmitter. RC-200 remote control, leg sets(4 each) for 6- 8- 10- 12 inch pipe, NEW target set with small and large lenses, rechargeable battery pack, NEW charger, NEW charger adapter, manual, 12v cord and the case. Professional calibration& 6-month warranty included. Screen of transmitter is crazed(see pic) but reads fine when on. 11255059 Please view our other items and store inventory for great values in Laser Equipment. Surveying and Machine Control Items from Spectra, Topcon, AGL, Laser Alignment, Leica and others. Take a few minutes to Review our FEEDBACK profile Buyer agrees to contact seller within 48 hours Payment must be received within 10 DAYS or within 2 days on a buy now order Shipping is for US mainland 48 states ... moreonly- ADD 25.00 to AK. HI, PR Confirmed PayPal- Money Orders- Checks Accepted and items ship upon clearance Questions/ Phone orders call 574-551-0026
JVC HR-S3600 VCR HI-FI Super VHS ET Active Video Calibration with Remote VG Cond
Up for sale is a pre-owned JVC HR-3600U 4-Head S-VHS VCR. It is in very good cosmetic condition with only minor scratches/scrapes and a couple of nicks. However. No major damage or dents to cabinet. Tested and functions excellent with good picture quality. Remote is included and also functions fully. Remote has neat glow-in-the-dark main keys. See pics. Remote uses 2"AA" batteries(not included) Buyer will receive VCR with Remote.nothing else. Send me a message if you have any questions about this unit. Thanks for looking. NOTE: Please ask questions before bidding as all SALES ARE FINAL. I will respond the same day. I do not accept returns unless there was an error in my listing or an item is not as described.
Commodore Amiga AMI Alignment System w Calibration Disk Tested RARE Repair Drive
This auction is for the pictured Amiga software. AMI Alignment System, complete with all the paperwork you see in the pics and the highly sought after Calibration disk. The software is tested, but I have no disk drives that need calibration, so I couldn't confirm that the calibration disk works. But out of the 50+ disks I checked in the lot I got this in, all of them worked without issue. This is a very hard to find package, and will allow you to recalibrate your 3.5 Amiga floppy drives. Email any questions. Thanks for looking. And don't forget to check my other auctions.
5 Gal Seraphin test Liquid Measure Can used for Calibration of Fuel pumps
This is a vintage SERAPHIN test measuring can for gas. I don't know much about this. It is in good shape for its age with the exception of a few small dents and scratches as seen in the photos. It is about 22" tall. 4" opening in the top and about 11" across the bottom. It still has a seal attached to the top of the float. The tube is intact. Ask any questions before bidding. Check out my other auctions. PayPal within 24 hours of auction end. Posted with eBay Mobile ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13e12a8b066-0xfc-
Mitutoyo Series 521 Model 521-105 Indicator Gage CALIBRATION TESTER, 0-5mm
Template By Froo! Mitutoyo Series 521 Model 521-105 Indicator Gage CALIBRATION TESTER. 0-5mm· WHAT IS IT? This listing is for(1) used Mitutoyo Series 521 Model 521-105 Indicator Gage CALIBRATION TESTER. 0-5mm. This sale includes shown components ONLY. No other unseen parts or accessories will be included. Normal 0 false false false EN-US X-NONE X-NONE· DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding additional that calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Good. No major cosmetic scuffs or blemishes(see photos) Normal 0 false false false EN-US X-NONE X-NONE· CAN I RETURN IT? No. Returns will not be accepted ... morefor this item. Please as questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! Normal 0 false false false EN-US X-NONE X-NONE About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Ba
LENSALIGN MKII FOCUS CALIBRATION SYSTEM LNIB
Auction Wizard 2000 Listing Template- AW2KLOT#4614 LENSALIGN MKII FOCUS CALIBRATION SYSTEM LNIB I'm offering my lightly used Lensalign MkII Focus Calibration System. Its in its original box. You really can't tell its been used. It works great for checking or calibrating the autofocus system of a DSLR. Note: Your DSLR must support AFMA(Canon) or Fine Tuning(Nikon) to adjust the Autofocus accuracy. You can use it as a tool to check the focus accuracy of any autofocus camera. The photo was taken during the alignment process of my lens. We Combine Shipping on Multiple Item Purchases For 1- 3 items. The ebay calculator normally does a excellent job of adding the weights together when checking out. For more than three items, we can often shave a pound or more off the total weight and save you money on shipping. We will send a email to winners ... moreof multiple items offering to do this. Please do not send emails asking about shipping for combinations of several items. To determine if there is less weight for multiple items. We must first pack them and weigh them. When you purchase multiple items we will charge you the actual shipping cost, no handling or other extra fees. SHIPPING Please see the ebay shipping calculator located near the bottom of the listing for shipping charges. We do our best to enter a actual shipping weight. However, if we make a significant error, we reserve the right to correct it. If we do this, we will offer the buyer an opportunity to cancel the purchase. We are located at Zip code 99003 in North- Eastern Washington State. PAYMENT OPTIONS PayPal is preferred. We ship to comfirmed addresses only. TERMS AND CONDITIONS All sales are final. No returns unless we made a error in the descriotion. Merchandise is guaranteed to match the description. If you have questions, please send us a e-mail prior to bidding.
★Mitutoyo 1" CERAMIC Datum Sphere for CMM probe calibration (Renishaw, Zeiss)★
Superb condition Mitutoyo 1" 99979" diameter) CERAMIC Datum S phere. Model# 050141C. Th is Swiss made. Thermally stable, ceramic datum s phere is mounted on a 7.1" long stem( from top of sphere to stem's mounting face) with a stem body diameter of.94" and a M8 mount ing stud. The sphere. Serial#25.4-00-0352, is backed by our full refund warranty- see below. The datum sphere will be furnished in a foam lined. Hard shell, storage case(not shown) Cert' is not included. Buy it now and save $$$$ WORLDWIDE SHIPPING AVAILABLE_ We're PayPal verified and offer the best. Full refund, warranty on Ebay: 90 days for new items and 60 days for used items(Ebay's listing template has a maximum return policy of 60 days so please disregard as we offer a 90 days warranty for new items) New items are guaranteed to be free of ... moreoperational defects for 90 days and used items for 6 0 days. The warranty does not cover buyer's remorse or product abuse/mis-handling of any kind. Returned items must be received in exactly the same condition as when they were shipped to the buyer and contain all original paperwork/accessories etc. The return shipping cost is the responsibility of the buyer. Please note: All item serial numbers are recorded prior to shipping. We carry an extensive inventory of new and used precision measuring tools from only the top tier manufacturers- all at highly discounted prices- email us for our complete tools inventory list: sales@qc-tools.com Attention International Buyers! Any applicable foreign import duties/taxes are the sole responsibility of the buyer. Need tools? See our! Our Ebay listings are protected under the United States of America Copyright Laws and therefore may NOT be copied! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e12ee868d-0xf3-
MACURCO CM21A-FCK CALIBRATION KIT Used
MACURCO FIELD CALIBRATION KIT MODEL- CM21A-FCK Tank is empty. No Gas in the TANK ALL ITEMS SOLD AS SHOWED OR DESCRIBE ON THE SCREEN. PLEASE MAKE SURE THAT YOU ASK AS MUCH QUESTIONS AS YOU WANT BEFORE BUYING THIS ITEM.
FEDERAL DIMENSIONAIR CALIBRATION KIT D2500 D4000
Scroll down to view full size photos. Checkout our listings for additional high quality measuring tools. Federal Dimensionair magnification calibration test kit. Calibrate models D2500. D4000, D2500M, and D4000M. Complete as shown. Are you are sending multiple Dimensionair gages out for calibration? This kit will save you time and thousands of dollars by allowing you to calibrate your Dimensionair's in-house. You only need to send the kit to Federal for calibration. Photos are of the actual item you will receive. See the many Precision Instruments and Tools that I have listed on eBay this week. to view my current auctions. I specialize in the sale of high end metrology instruments from USA. Germany, Switzerland, and Japan(never ChiCom knock off's) If you require A2LA accredited ISO 17025 certification of any of our items please email ... morefor a quote. Calibration is provided by our friends at Meegan Tool Sales of Glastonbury. CT. May God bless America. Photos and text copyright 2012 Click to View Image Album Click to View Image Album Shipping& Handling If you purchase multiple items Please WAIT for me to send invoice. I will combine shipping to save on cost where possible. $10.55 USPS Priority Mail® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
MSA CALIBRATION TEST SYSTEM MODEL R CHECK KIT WITH FLOW CONTROL 459949 226L4
MAINLAND VALVE& FITTING. INC. INDUSTRIAL WHOLESALE SUPPLY MAINLAND VALVE& FITTING IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS. YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS. Be sure to add me to your favorites list! YOU ARE LOOKING AT ONE(1) OF THE FOLLOWING: Lot Description: YOU ARE LOOKING AT ONE MSA CALIBRATION TEST SYSTEM MODEL R CHECK KIT USING FLOW CONTROL#459949 VIEW THE PICTURES. THE UNIT COULD BE MISSING PARTS USED SURPLUS SHIPPING WEIGHT: 10 LBS( These products are represented as USED SURPLUS) IF YOU HAVE ANY QUESTIONS. PLEASE CONTACT US AT: Customer Service Check out my other items! Be sure to add me to your favorites list! Bid High& Bid Often THANK YOU. COME AGAIN Please note: In some cases we ... morewill use the same picture for multiple listings of the exact same item. Please keep in mind that you will receive the same product of the same or better quality as pictured. Our office hours are M-F. 8-5cst. We will respond to any questions you have on the following business day. INVESTMENT RECOVERY*SURPLUS INDUSTRIAL WHOLESALE SUPPLY* Terms& Conditions: Mainland Valve& Fitting. Inc. is a wholesaler of surplus industrial equipment. All products represented by Mainland Valve& Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture. No manufacture warranty or any warranty is expressed or implied. All products represented by Mainland Valve& Fitting, Inc. that is noted as factory new are factory new and are warranted only by the manufactures warranty. No other warranty is expressed or implied. All Names, Logos, Description& other related information are trademarks of their respected companies. All information listed herein is. To the best of our knowledge, believed to be correct. All material is surplus, and we have no way of testing anything we sell. Please review the pictures carefully. All material noted as new surplus ar
Mydata Calibration Board L-29-220F or L-29-243 Accuracy Test Board
The Chessel Store purchases original factory excess inventory from various companies that have discontinued products that are still currently active in the field. The purpose of our company is to extend the life of your equipment investment at a much lower cost than it would take to purchase more expensive replacements. We encourage you to compare our pricing with all other suppliers. MYDATA Calibration Board. Mydata part number L-029-0220F. This part is from a spare parts crib from an operation that recently shutdown. The Pictures shown in this listing show the actual part that will ship. All of our MYDATA Parts are discounted by 20% to MyDATA's current quoted replacement price. We stand b ehind this item with a 30 money back return policy. For additional information or pictures please email
JVC HR-VP653U VCR Plus+ Hi-Fi VHS Stereo DA 4 HEAD HQ Active Video Calibration
JVC HR-VP653U VCR Plus+ Hi-Fi VHS Stereo DA 4 HEAD HQ Active Video Calibration FOR SALE: JVC HR-VP653U VCR Plus+ Hi-Fi VHS Stereo DA 4 HEAD HQ High Quality Active Video Calibration Plug& Play CONDITION: Excellent Condition- Minor Scratches On Front. Back, Top, Bottom and Sides(See Pictures) Common With Use JVC HR-VP653U VCR Works Well. Great Sound and Video. VCR Plus+, Hi-Fi VHS Stereo, DA 4 HEAD, HQ High Quality, Active Video Calibration, Plug& Play Includes User's Manual Normal 0 false false false EN-US X-NONE X-NONE For faster processing. Use the"Pay with Credit Card" selection during checkout or call us toll-free at 1-877-237-5248 Auctions include only what is pictured. If it is not pictured or listed. It is NOT included. Rebay Reseller is a resale and pawn shop in Boulder. Colorado and we do not claim to be experts ... morein any one field nor do we know an item's history unless noted in the auction. All electronics are fully tested and working properly unless otherwise noted AS-IS. There is no return on AS-IS items. Aesthetic/Physical Condition Definitions: New: Brand New. In perfect condition. Mint: Like New condition. Pre-owned Near Mint: Almost mint. Free from any scratches, scuffs, or blemishes. Excellent: Pre-Owned. Minimal signs of wear from normal usage. Very Good: Pre-Owned and may have noticeable scratches. Scuffs, or blemishes. Good: Pre-Owned and may have major marks. Blemishes or scratches. Payment must be received within 4 days of the close of auction. Or a unpaid item case will open. Local pickup is always available and always FREE! See our store hours below or contact us for details. Colorado addresses are required to pay our current local sales tax of 8.16% at the time of checkout. Our standard US shipping service is UPS Ground(insured) for large items. And USPS Priority Mail/First Class Mail for smaller items. All listed Flat Rate shipping charges are only available to the 48 contiguous states. HI/ AK/ APO addresses: Contact us prior to bidding for shipping quotes. PO BOXE
Pantone Colorvision SPYDER Monitor Calibration Device Digital Image Photography
SPYDER by Pantone Colorvision for Monitor Calibration Please see our other listings at, KML'S CORNER. As we have a great variety of quality Brand Name items at discount prices. This is a device made by Pantone Colorvision that is used to color correct a computer monitior. It is the Spyder for Windows and Mac computers. It calibrates the colors that the monitor displays for great digital images. The device and Photocal software instructions are in the box. The Photocal software is not included. But it can be found online and downloaded to your computer. The device is missing the baffle for the LCD monitors. It does work great on CRT monitors as I downloaded the software and calibrated mine. Shipping and handling is Free for this item in the US only. I accept credit cards with a confirmed US address through Paypal. Thanks for looking. And ... moreenjoy! Click here to see our other items- We Combine Shipping! psgg Like what you see? Click here to add us to your Favorite Stores list on your My Ebay page! International Buyers We Welcome International Buyers. We accept paypal as forms of payment. Please contact us with your shipping address if you are the winning bidder so we can recalculate the shipping costs. We only ship priority airmail which is expensive so please be sure to ask for a quote before bidding. Thanks! Shipping Information Shipping is through UPS which requires a street address for delivery. Other Information Please See My Other Auctions- We Combine Shipping for Reasonable Costs on Multiple Purchases. Return Information We accept returns when our customers are unhappy with their purchase. We will refund the winning bid price only- no shipping costs will be reimbursed. The item must be returned in the same condition it was received in. Please contact us with any questions.
Sony Calibration Mic ECM-AC2 microphone BDV-E570 BDV-E770W BDV-T57 home theater
Sony Calibration Mic ECM-AC2 microphone BDV-E570 BDV-E770W BDV-T57 home theater Calibration Mic for Sony Home Theater BDV-E570 BDV-E770W BDV-T57 This Sony Calibration Mic came with a BDV-E770W home theater system. What you receive will be identical to the one in the picture.
Original AUDYSSEY Sound Calibration Microphone For Onkyo AV Receivers
Original AUDYSSEY Sound Calibration Microphone For Onkyo AV Receivers Never Used- Microphone and cord only- No Packaging Shipping $5.99
Caterpillar 3P2200 CAT Sleeve Metering Fuel Injection Pump Calibration Tools Kit
Caterpillar 3P2200 CAT Sleeve Metering Fuel Injection Pump Calibration Tools Kit Thank you for looking. Please check out my eBay Store: Starfish Unlimited for some great deals. Used Good Condition Genuine Caterpillar Not Aftermarket 3P2200 Sleeve Lever Calibration Tool Group For 3208 3304 3306 1108 1160 3160 Engines with Sleeve Metering Fuel Injection Pumps NOT for use on Forged Body. Compact or New Scroll Pumps With this tool group I have included a 5P4209 calibration tool which CAT sells separately. I included it with this tool group because it is needed along with this 3P2200 tool group to set 3208 cross over levers. This Tool Group has a dial indicator which insures more accuracy and allows you to set the sleeve levers to closer tolerances This tool group was used only a few times.There may be slight scratches from every day use. The ... morebox has slight scuffs and does not have the original label. These scuffs and scratches are cosmetic and do not affect the accuracy of the tools. The 3P1540 Calibration Pump included in this tool group has not been used at all because it is a replacement for the original calibration pump that was lost. In fact. It still has the factory protective wax coating on it. This auction/buy it now is ONLY for the item pictured. If you have any questions please contact me before bidding. I ship to the USA and Puerto Rico Only(No International Shipping) Combined Shipping Available We only accept PayPal. Payment must be made within 3 days of winning an auction/ Buy It Now. If for some reason you have a problem with payment you MUST contact me within three days of winning an auction/ Buy It Now so we can work something out. If Payment Is NOT received or arrangements made within one week of close of auction/ Buy It Now I will open a case on ebay for non payment and/ or relist the item. I ship to the United States Of America ONLY. I ship to all 50 states and Puerto Rico. No International Shipping) All items are shipped using The United States Postal Service. We ship your item or items within
HP/Agilent E2807 Automatic Calibration Unit for 84000 RFIC Test Assembly
Search our eBay Store! HP/Agilent E2807 Automatic Calibration Unit for 84000 RFIC Test Assembly SKU: JV-ZOR-B-HPAUTOCALE287 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 HP/Agilent E2807 Automatic Calibration Unit for 84000 RFIC Test Assembly Model: E2807 Physical Condition: Good- minor scuffs/scratches on the unit’s casing. Top panel handles are in good condition. Connection ports show no noticeable signs of damage. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Dimensions(L" W" H" 13 ½ X 12 7/8 X 9 5/8 PLEASE NOTE. THE ... moreFDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more.
Neumann H480 B Test / Calibration Signal Generator from a Telefunken desk
800x600 You are bidding on a Test/ Calibration Signal Generator NEUMANN H 480 B Mint condition. Like new Versatile. Convenient, reliable. The quality you would expect of a Neumann device. Specifications: Frequency drift: less than 2.5% Level accuracy at different loads: better than 0.2 dB THD at +22 dB output level: less than 0.2% 3 transformer balanced outputs with 3 different levels Calibration trim pot Level pot Switchable between fixed level and variable level Needs 24 Volts This unit was taken from a bigger studio-environment due to conversion to digital about 12 years ago. It has been carefully stored since. A pin-out can be provided. If necessary. Please notice that this item is shipped from Germany. In worst case shipping to the US or Australia may take up to 6 weeks. Usually it takes 3 to 4 weeks. Customs fees may apply according ... moreto the referring national regulations for used goods and have to be payed by the buyer. Please also see my other auctions. Normal 0 21 false false false DE X-NONE X-NONE
BOSE ADAPTIQ CALIBRATION AUDIO SYSTEM For Bose V Class V10 V20 V30 V25 V35 T20
Selling for a BOSE ADAPTIQ CALIBRATION IQ ADAPTiQ AUDIO SYSTEM. Used only once. Works with Bose Lifestyle V10-V20-V30-T20-V25-V35 PAYMENTS Payment required within 4 days after the auction ends. If you will not be able to pay within this time frame given. Please advise me before bidding. And also, inform me when I may expect your payments. PLEASE… SERIOUS BUYERS ONLY! Local pick up Available! Ship to continental states(Paypal confirmed address) only. 3-7 days is usually the amount of time it takes USPS to ship.
Cummins Fuel Pump PT Type G Calibration Instructions Control Parts Manual List
Cummins Fuel Pump PT Type G Calibration Instructions Control Parts Manual List N ew Original 1977 factory issued Cummins Fuel Pump PT Type G Calibration Instructions Control Parts Manual. Bulletin number 3379068-02. This manual is used and shows minor wear as you see in photo's. Please see my other manuals and combine shipping. Thank you
VLSI Zygo Wyko SHS-180QC 180Å Quartz Step Height Calibration Standard 17.8nm
Search our eBay Store! VLSI Zygo Wyko SHS-180QC 180Å Quartz Step Height Calibration Standard 17.8nm SKU: JV-JIM-B-SHS180QC Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge VLSI SHS-180QC 180Å Quartz Step Height Calibration Standard 17.8nm Model: SHS-180 QC Physical Condition: Fair; chromium coating is slightly chipped around edges. Case Dimensions(L" Æ" 1/2* 2 3/8 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to ... moreregulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please contact us before leaving feedback or opening a case. Let us save you time&
Untested Bose AdaptIQ Audio Calibration System
ebay template Description Enjoy pure entertainment. Within your personal space, with the Bose ADAPTiQ speaker system. The unique Bose technology, in these Bose home theater speakers, adjusts the variables for a crisp audio quality. The proprietary software of these Bose speakers delivers optimized performance, for a particular room. Moreover, the Acoustimass module of these Bose home theater speakers assures life-like sound output. The user-friendly set up of these Bose speakers lets the user connect and operate the device with comfort. Rearrange the furniture or re-design the interiors, the Bose ADAPTiQ speaker system has been designed to blend in with all the changes, effectively. Product Identifiers Brand Bose Model ADAPTiQ Key Features Speaker Type Speaker System Our products are part of a large lot of items received from companies upgrading ... moretheir equipment. We are selling an Untested Bose AdaptIQ Audio Calibration System This item is being sold for Parts/Repair. The only item you will receive is the item shown in the listings photos. No other items or accessories are included that are not shown in the listings photos. Specification: Brand: Bose AdaptIQ Condition: Please see photos. This calibration system is in fair physical condition. The box is in below average physical condition. The discs are in fair condition. Testing: Due to lack of equipment. This item has not been tested. Since the item was not tested. It will be placed in the“For Parts or Not Working” eBay item condition category. Items Included: You will receive only the items shown in our photo and stated in the description. 1 Calibration System 1 Setup and Demonstration DVD 1 AdaptIQ DVD Original Box If free shipping is offered in our auction we will ship within the 48 contiguous United States free of charge. We will also ship to other parts of the US and internationally. But buyer will be responsible for all Shipping and Handling charges. Customers from Hawaii. Alaska. Puerto Rico, Guam. And Saipan Northern Mariana Islands, please contact
1980 Cummins PT Fuel Pump Rebuilding and Calibration Instructions
Original 1981- Cummins PT Fuel Pump Rebuilding and Calibration Instructions This item is in great condition(see pics) Additional pictures will be provided upon request. This item may be returned(minus shipping costs) if you are not completely satisfied- so bid with confidence. COMBINED SHIPPING AVAILABLE. No international shipping without prior approval. If you have any questions. Please email me. CHECK OUT ARE OTHER ITEMS AT OUR SONOMATREASURES4U STORE- JUST CLICK THE" RED" DOOR ICON ABOVE. Posted with
Panasert Panasonic Factory Automation MPA III MVII Full complete Calibration kit
This auction is for 1x Panasert and/or Panasonic Factory Automation MPAIII or MVII SMT Line Full and Complete Calibration kit. Including all the"plates" software, and many other calibration items. It shows the full line on the case but if you have the placement units(MPAIII or MVII) it will do you the most good. Please ask any questions you may have as there are no warranties expressed or implied before the close of the auction. Thank you. SD/X Scientific Devices Exchange LLC
Mydata Calibration Boards L-29-220F L-29-243 Accuracy Mydata Test Board
Mydata Automation Calibration Boards(1) of Part Number L-29-220F and(2) of Part Number L-29-243 Accuracy Test Boards All 3 included at this price Let us know if you have any questions or concerns. Contact Bill at 978-790-2774.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13e3dfd61bd-0xfa-
"VERY OLD"Antique Brass Working Marine Thermometer that may need calibration
This Very Old working thermometer is encased in brass with a excellent photo of a large sail ship with all sails flying on the face. the original glass is intact with no scratches. There are foru(4) missing grips which can be replaced if you choose to do so. Underneath is a screw which probably held the base. down. The numbers and photo looks to be on gold leaf or gold painted metal because there is no deterioration of any sort. The outer case also has aslight dent to the top left edge. The writings on the face is: FAHRENNHEIT on top and Dependable Machine Company. Inc Greensboro, N.C. along with a Po Box# and a five digit telephone number along the bottom.Of the Three remaining grips, one is a little loose. The Brass can be cleaned if you wish to do so, but that should be the winners decision. Deminsions of the item. The Face is 3 inches ... moreacross including the grips it is 5 inches across with a 4 X 3 Base
Korg Digital Metronome MA-30 Adjustable Calibration Beats 13 Rhythms Tap Tempo
Korg Digital Metronome MA-30 Adjustable Calibration Beats 13 Rhythms Tap Tempo Pre-Owned Korg Metronome MA-30 Digital Metronom Model MA-30 Rhythms. Pitches, Adjustable Calibration, Volume Tempo Adjusts. Tap Tempo Working Condition See Pictures We accept Paypal or Propay for payments. We use the post office for most of our shipping but also offer UPS or Fed-Ex. We ship daily Monday- Friday within 24 hours of payment. Most packages that are paid by 9am ship the same day. We use delivery confirmation on every package which shows the package was delivered. International customers can choose from first class mail up to 4 pounds and Priority mail for all other shipping. There is a barcode electronically attached to the label for customs. It is not a tracking number because it is not available internationally. If you receive the item damaged please ... morecontact us for refund procedures. Items are insured and we have to have documentation of any damage from you including letters and pictures before we can reimburse you for the item. We need this to file a claim with the insurance company for reimbursement. We list hundreds of items per month and try to be honest about the condition of the item. Flaws and working condition. If we missed something huge or the item doesn't work when received just email us and we will resolve the situation. We find these treasures of old and new from estate sales. Flea markets, yard sales, auctions and wholesale liquidation companies. Ebay only allows communication between us through their message system to prevent sellers from selling outside of Ebay. We respond within 24 hours Monday thru friday and most of the time within 24 hours during the weekends. On Apr-22-13 at 13:54:10 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
Thermo Scientific EPD MK2+ 2.5 Radiation Personal Dosimeter Current Calibration
Thermo Scientific EPD MK2+ Personal Dosimeter Thermo Scientific EPD MK2+ Personal Dosimeter. Used. In good shape(as you can see in the photos) Was calibrated on 2012-08-13 by Uni-Ver Tech Inc. 30 day warranty! $1178 Retail! From the Manufacturer: Advanced radiological performance in a small. Lightweight, handheld unit Ergonomic rugged design with an alligator clip for convenience, Excellent response to gamma. Beta, and X-radiation with immunity to electromagnetic interference, Display and function control via a single button on the front of the unit, Audible and visual alarms for dose. Dose rate, count-down time, read time and failure mode, Rapid infrared communications to reader/PC or stand-alone operation, Easy-to-read display with optional backlighting, Unit retains data up to 10 years without a battery, Single 3.6V lithium battery provides ... moreup to 30 weeks of continuous operation; also operates on"AA" alkaline battery, Available with coin battery cap that opens with twist of a coin. Or security battery cap that requires a special tool to open(sold separately, Shipping Information: $17 Expedited Shipping to anywhere in the US or Canada! YES! We do combine shipping! Please purchase/pay multiple items and we will refund so you only pay actual shipping. Who are we? We are a liquidator from Ontario. Canada. We liquidate stock, assets and seizures. We are not a authorized reseller of the above product, and as a result you will receive a fantastic deal and based on the above description, a money back guarantee. We love reasonable offers and assuming it is reasonable we will promptly accept or counter offer. LiquidateOntario Bidding/Purchasing Terms: Please Note; This item is being shipped from Ontario. Canada. If you are purchasing from US or Internationally, shipping times are very much dependent on Customs as they may hold your package for processing, and may charge you duty(tax) on the purchase price. In the case of US Purchasers, this almost NEVER happens, however you are fully responsible for the charge
WORK READY! Optical Alignment Telescope K&E 71-2022 w/light & Recent Calibration
0 false 18 pt 18 pt 0 0 false false false DESCRIPTION AMSL LLC Reference#323. US Sales and shipment only. 7 Day Sale at this low price! This listing is for a K&E Keuffel& Esser 71-2022 Alignment telescope including a recent calibration report traceable to NIST. Etc. by a magor independent cal lab. Our company sent this instrument for calibration during December 2012. It has not been used since calibration and has been carefully stored. Includes: 71-5511 illuminator for autocollimation; six(6) spare lamps; twist-lock power cord for 120V power; transport case; Calibration report dated 12/12; User manual(not shown) Plug and play- READY TO WORK! Instrument serial number: 408628. 2.2498" diameter barrel is compatible with most AIA specification tooling. This same model alignment telescope is still produced to the same specs by Brunson ... moreInstrument Co of Kansas City. It is our understanding that on the factory new model. It's only the lighting that differs from our K&E produced instrument offered here. The price for a factory new instrument is well over 4 times this! We are expert in packaging precision equipment for safe delivery anywhere in U.S. territory. Free insured shipping! CONDITION: Used. Excellent condition. This instrument has not be used since calibration for our company during December 2012. This equipment has been carefully stored. As with most used tools. There may be old label residue or inventory markings. Photo Note: Mirrored surfaces are tough to photograph. The autoreflection target at the objective lens is in perfect condition. U.S. Sale and Shipment Only. THIS EQUIPMENT IS OFFERED WITH OUR AS-REPRESENTED GUARANTEE. This equipment is guaranteed to be as we represent it in this eBay listing for the first 14 days following delivery to your shipping address within the 48 contiguous United States(the lower 48 states) All sales or shipments to other locations will be as-is and are final. If the item(s) is found to be discrepant. For a refund you must notify us of the problem by e-mail
Trimble DG711 Pipe Laser System - Professional Calibration Included
SquareTrade © AP6.0 Trimble Spectra Precision DG711 Pipe Laser in good working order. Red Beam. Package includes remote. New target base with small and large lenses, manual, alkaline battery pack, rechargeable battery pack, charger, 8" centering plate and the case. 6-month warranty included. Professional calibration performed prior to shipment. Used#12255024 Additional accessories and packages are in stock. MCE Office 574-267-1623 We are an Authorized Trimble Spectra Precision Dealer that specializes in NEW& Used laser equipment. We are NOT a drop ship enterprise. But a full service dealer that provides prompt professional service and sales. From the manufacturer: Built for your toughest jobsite The rugged Spectra Precision® Laser DG711 Pipe Laser is built tough for long lasting performance and reliability. The DG711 pipe ... morelaser is completely waterproof and designed to ensure easy cleanup. Setup is fast with a full range of mounting accessories available. And easy to use with straightforward, no-instructions-required" controls. In addition, through the Service Alert feature, they keep track of their own maintenance needs, indicating at pre-set intervals when it's time for a check-up. Featuring a very rugged design and a variety of unique technological capabilities. These Pipe Lasers stand up to corrosion from acids. Chemicals, salts and other destructive underground elements as well as to the physical abuse typical in the construction industry. Applications installation of gravity flow sanitary and storm sewer pipelines pipe jacking tunnel boring Features Widest automatic self-leveling range available for quick. Easy setups regardless of grade. Line Alert feature alerts when the setup line has been disturbed. Ideal for working in high-vibration or wet conditions. Ability to raise the beam outside of the trench for fast line setup or checking. Eliminating the need to move the excavator off line during setup of the pipe laser. Patented Target Lens transfers the beam up at an angle for eas
Hamar Laser Interferometer Measurement Calibration System - 2 kits!
Hamar Laser Measurement Calibration System- 2 kits! System 1 Hamar L711 Laser head with L110 Head- Unit powers up and laser fires Hamar LS-600B Line Stablizers Qty 2, Hamar Laser Stands 1 complete. 1 missing laser platen, L700 Spindle Laser, L800 Power Supply, L-800 Spindle Laser, T251A Quanity 1, T261A Quanity 2, Hamar RD355C Miscellaneous Cords, System 2, Hamar 711 Laser Head- unit has power but laser does not fire, P402- Quanity 2, T402L, L102, A517 Mag Base, Hamar Accessories, Laser Positioners, R302S Digital Readout, Magnetic Base, Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING ... morePOLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
Laser flat table adjustment/calibration jigs
Laser Flat table leveling jigs. Came with a Medtech red laser in the main jig. The accessory jigs that have three point leveling platform 2 each. right angle prisms in the laser unit. This is for a Laser hobbyist or engineer. Science teacher.
TECHNICS RS-B905 CLASS AA 3 HEAD DUAL CAP BIAS & CALIBRATION CASSETTE DECK VG
A TECHNICS RS-B905 CASSETTE DECK IN EXCELLENT CONDITION CIRCA 1989 PAYMENT MUST BE COMPLETED WITHIN 3 DAYS OF AUCTION END. UNLESS PREVIOUSLY AGREED SPECIFICATION INCLUDES: MADE IN JAPAN CASSETTE DECK AND MAINS LEAD CLASS AA CIRCUITRY 3 HEAD SYSTEM CLOSED LOOP DUAL CAPSTAN ADJUSTABLE BIAS SEPARATE LEFT AND RIGHT ADJUSTABLE RECORD CALIBRATION ADJUSTABLE INPUT AND BALANCE LEVELS TAPE AND SOURCE MONITOR DIGITAL PEAK LEVEL INDICATORS DOLBY B. C AND HX PRO dbx NOISE REDUCTION MPX FILTER RECORD AND PLAY TIMER REPEAT MODE MUSIC SELECTOR MULTI VOLTAGE SELECTOR: 110v. 127v, 220v AND 240v HEADPHONE SOCKET WITH VOLUME CONTROL SERIAL NUMBER: CB7909B007 SUPERB FULL SIZED CASSETTE DECK MADE IN JAPAN BY ROTEL. TESTED AND IN PERFECT WORKING ORDER FLAGSHIP CASSETTE DECK FEATURING 3 HEADS. CLOSED LOOP DUAL CAPSTAN AND CLASS AA CIRCUITRY ALSO FEATURES MONITOR. ... moreADJUSTABLE BIAS AND SEPARATE LEFT AND RIGHT RECORD CALIBRATION THE USER HAS THE CHOICE OF EITHER DOLBY B AND C AND dbx NOISE REDUCTION SYSTEMS WAS TECHNICS' TOP OF THE RANGE CASSETTE DECK IN THE LATE 1980s IN PERFECT WORKING ORDER AND EXCELLENT COSMETIC CONDITION. HAS SOME MARKS TO THE FASCIA AND CASE. INCLUDES CASSETTE DECK AND MAINS LEAD PLEASE CLICK ON THE IMAGES BELOW FOR A CLOSER LOOK: IF YOU REQUIRE ANY MORE INFORMATION OR PHOTO'S. PLEASE ASK POSTAGE COSTS: MOST OF MAINLAND EUROPE: 36GBP USA/CANADA: 48GBP AUSTRALIA: 60GBP SOUTH AMERICA. EUROPEAN UNION AND THE REST OF THE WORLD: PLEASE CONTACT US FOR ACTUAL COST PLEASE TAKE INTO CONSIDERATION THAT POSTAGE INCLUDES MATERIALS AND TIME SPENT PACKING. IF YOU CONSIDER OUR COSTS TO BE TOO HIGH. PLEASE DO NOT BID. ITEMS SELLING FOR 60GBP AND ABOVE WILL INCLUDE INSURANCE AT BUYERS COST PAYMENT IS REQUIRED WITHIN 3 DAYS. UNLESS PREVIOUSLY AGREED. WE TRY OUR BEST TO DESCRIBE ITEMS AS ACCURATELY AS POSSIBLE, IF THERE IS A PROBLEM, PLEASE CONTACT US BEFORE LEAVING FEEDBACK
FEDERAL 136 B-3 CALIBRATOR/COMPARATOR- BOTH ID & OD-INCLUDES CALIBRATION
FEDERAL 136 B-3 CALIBRATOR/COMPARATOR- CALIBRATES BOTH ID& OD- AUCTION PRICE INCLUDES CALIBRATION(RANGE 0.125" 12" READS IN 0.000001" INCREMENTS) GAGE FINGERS NOT INCLUDED IN AUCTION OPERATION MANUAL INCLUDED*NOTE- WE WILL USE A SET OF GAGE FINGERS TO CALIBRATE THAT IS NOT INCLUDED IN AUCTION PAYMENT BY BANK WIRE. BANK OR COMPANY CHECK IS ACCEPTABLE FOR THIS AUCTION WE HAVE A LARGE INVENTORY OF INSPECTION. CALIBRATION, TESTING EQUIPMENT PLEASE CALL 860-242-4953 FOR ASSISTANCE
POSITEST COATING THICKNESS GAUGE WITH CASE LANYARD & CALIBRATION SHIMS 0-80 MILS
POSITEST COATING THICKNESS GAUGE THIS AUCTION IS FOR THE POSITEST THICKNESS GAUGE WITH LANARD. CARRYING CASE, AND PACKAGE OF SHIMS FOR CALIBRATION AND ORIGINAL INSTRUCTION GUIDE. OPERATING INSTRUCTION GUIDE INCLUDED BUT NOT SHOWN IN THE PICTURES MEASURES 0- 80 MILS NON MAGNETIC COATINGS(PAINT. PLASTIC, ENAMEL, PLATING ON STEEL. RUGGED DESIGN FOR FIELD MEASUREMENTS. NON DESTUCTIVE MEASUREMENTS. This is Unit has been tested and is in working condition. Please see the pictures for additional information on the condition. GUARANTEED NO DOA 14 DAY RETURN! I offer combined shipping! WHEN FREE SHIPPING IS OFFERED IT IS FOR THE LOWER 48 USA STATES ONLY. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nikon D90 - Needs Focus Calibration - No Reserve
This D90 is in great shape with about 28.500 shutter clicks, but needs a focus calibration. Pictures are consistently exposed properly and everything works great, but I've not been satisfied with the focus on this. I ran accross a great deal on another DSLR so am selling this one at a loss. Includes charger and two batteries(one Nikon/ one aftermarket) Let me know if you have any questions before bidding. It is being sold as is so please bid accordingly. $5 flat rate shipping within the continental US. International bidders pay actual shipping costs. Thanks for looking and have a great day.
Starrett (84A) 81PC Webber Gage Block Set W/ Calibration Certificate
Starrett(84A) 81PC Webber Gage Block Set W/ Calibration Certificate This is a used set made in 1967 see picture need cleaning but all is there. Blocks Included In This Set Is 9 Blocks.1001 Through.1009(Steps of.0001) 49 Blocks.101 Through.149(Steps of.001) 19 Blocks.050 Through.950(Steps of.050) 4 Blocks 1.000 Through 4.000(Steps of 1" Posted with
Powers Pneumatic Calibration Kit 832-163 Used
Used Powers pneumatic calibration kit and box Used as-is. Will be shipped Priority at 3 lb rate
Veeco SiC mirror used for PSI calibration
Veeco SiC mirror used for PSI calibration that was purchased at a recent solar equipment auction in Phoenix. AZ.
Veeco 10um step height standard for VSI calibration
Veeco 10um stepheight standard used for VSI calibration that was purchased at a recent solar equipment auction in Phoenix. AZ.
Army frequency meter BC-221-N w/ frequency calibration manual
ARMY FREQUENCY METER. IN EXTREMLY GOOD CONDITION FOR IT'S AGE AND USE. COMES WITH ORIGINAL FREQUENCY CALIBRATION MANUAL
Johnson Controls Pneumatic Controls Calibration Kit
The Johnson Controls Model JC 5383 Calibration Kit is a portable. Prepiped test panel designed for field calibration and checkout of T-5800 Reciever Controllers. This versitle kit can also be used for calibration and checkout of the N-9000 Enthalpy Logic Center as well as various other controllers and auxillary devices. The air connections. Pressure regulators, and gages are numbered with lines drawn between them to show the internal circuitry of the panel. The panel ispositioned in the case such that the case can be hung by the handle on the wall next to the control pane for hook up convienence. This kit can be used to check and calibrate controllers and temprature devices quickly and accurately. Once you have used this kit to calibrate a reciever controller. You will never want try to calibrate them any other way. The gages have the temp ... moreand pressure markings of popular Johnson Controls temp and humidity sensors in various ranges as well as actual 0-15 PSI marks on the outer scale. Current prices for the newer JC5383A Calibration Kit online are in the $2000- $3000 range. This kit can be used to calibrate pneumatic controls made by other manufacturers such as Honeywell. Robertshaw, Seimens, Barber Coleman, etc.
VEECO SLOAN DekTak 100 nanometer (1000-Angstrom) Profiler Calibration Standard
VEECO SLOAN DEKTAK Profiler Measurement Standard Catalog# 138-312 1000 Angstrom with Serial Number Case See photos for details(sorry about the dust particles) FYI. Please see our Additional Ebay Listings which includes: VLSI Step Height Standard: 160 Angstrom Class 10 Cleanroom Torque Tools for fine process control PayPal ONLY and Thanks for looking
SONY ECM-AC2 Calibration Microphones set of (2)
For sale I have a used set of Sony ecm-ac2 Audio Calibration microphones They are working properly Selling as pictured. They have scratches and scuffmarks
Johnson Gage Internal Thread Gage Calibration Gage Segments
10-24 UNJC Internal Calibration Segment; Minimum Pitch Diameter: 0.1629" Right Hand Thread; Set=2 Segments(Surplus) For use with Johnson Gage GJ-5 Series Frames; Starrett 1140 or Allen Engineering 1140 Internal Segment-style Frame. I have 66 total sizes of Calibration Segments available up to 2" I have a total of $1.700,000 worth of Johnson Gage components available. Message me for details. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e60acc085-0xfe-
Bose Adapt IQ Calibration System Lifestyle Complete for AV18 AV28 AV38 AV48
Tested 100% Works Great In* Great* condition Actual item pictured. What you see is exactly what you will receive. Check our Feedback! Thanks
OL 455-12U Variable Integrating Sphere Calibration Standard
The OL Series 455 is a high intensity integrating sphere calibrationstandard designed for accurately calibrating very sensitive instrumentation.The OL 455 consists of an optics head and a separate controller. Includes optics head. Controller and cables. Manufactured by Optronic Labs.
PI Tape 100-300mm, Stainless Steel, Outside Diameter, Calibration Report, Used
U sed PI Tape, 10 0- 3 00mm Stainless Steel Out side Diameter Manufacturer: Calibration report- see la st pic. From closed business Item shipped within 1 business day of cleared payment. Paypal. Skrill or pay on pickup. I also accept postal $ orders. Email before buying. No returns. International bidders are responsible for customs. Duty or VAT fees.
PI Tape 300-900mm, Stainless Steel, Outside Diameter, Calibration Report, Used
U sed PI Tape, 3 0 0- 9 00mm Stainless Steel Out side Diameter Manufacturer: Calibration report- see la st pic. From closed business Item shipped within 1 business day of cleared payment. Paypal. Skrill or pay on pickup. I also accept postal $ orders. Email before buying. No returns. International bidders are responsible for customs. Duty or VAT fees. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e62e7262a-0x101-
Roland Jupiter 6 Synthesizer Keyboard Calibration Notes
Be sure to add me to your favorites list Roland Jupiter 6 Synthesizer Keyboard Calibration Notes in.pdf Format. This is a good quality scanned vintage Roland Jupiter 6 JP-6 calibration notes in adobe.pdf format. It's 4 large pages of great information. You will be sent a link from which to download it from my upload site. Thanks for looking! Check out my other items!
DENON DM-A409 OMNIDIRECTIONAL CALIBRATION MICROPHONE
Denon DM-A409 calibration microphone. Never used. With original box. Free domestic shipping. Will ship international for additional fees. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e676d9add-0x102-
LUXMAN K-03 Manual Calibration Cassette Deck Need Ser..
Offered is a rare Luxman K-03 cassette deck. Unit turns on but does not play tape. Cosmetic is good. Shows wear on top. There's a small dent at the back. Please refer to photos for details. Sold as is for service or repair. The sound quality of this deck is well worth repairing. Shipping cost is $59 via FedEx Ground 5-7 business days insured with tracking# PayPal payment accepted. PayPal to confirmed address only. Contact and payment must be made within 7 days. Please feel free to ask questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Lot of 5 Wilson Hardness Test Blocks HR15T HRB HRB HR30N w/ Calibration Certs
Used Lot of 5 Wilson Hardness Test Blocks HR15T. HRA, HRB, HRB, HR30N w/ Calibration Certs Paypal due immediately/ Local Pick-up available 8am-12noon weekdays from 91355/ CA sales tax required. WE SHIP FAST! Location/ supercart 5 XSA bin Box 1
Aminco Magne Gage Coating Thickness Tester w/ Case, Calibration Standards, Instr
Welcome! Up for sale is an Aminco Magne Gage Coating Thickness Tester w/ Case. Calibration Standards, Instructions. For measuring thickness of non-magnetic coating on iron or steel and nickel coatings on iron, steel, or any non-magnetic material. Small crack in the clear plastic shell by one of the bolt holes. Includes photocopied instructions. Made in the USA. Used in good condition. Feel free to email any questions! SCT1802a
TOPCON auto level AT G7N W/Tripod & Curent Calibration sticker till 6-25-2013
TOPCON auto level AT G7N W/Tripod& Current Calibration sticker till 6-25-2013 comes with tripod sorry no case for the level.
NEC KT-LFD-CC Display Color Calibration Kit for M40B-AV
Save Central Refurbished NEC KT-LFD-CC Display Color Calibration Kit for M40B-AV The NEC KT-LFD-CC Display Color Calibration Kit enhances the visual impact of digital content whether in lobbies. On set in studios or in hospitals. Designed specifically for video walls, it measures each display's color and brightness and calibrates them all to identical optimum settings. This capability helps create the look of a seamless, mega-sized display and provides assurance of overall image consistency if one or more of the displays is replaced. Product Condition: Refurbished- Refurbished products have been restored to meet manufacturer quality standards. May show limited signs of use and cosmetic blemishes. They may be missing some accessories that are not needed for the functionality of the product and carry a 90 Day SaveCentral warranty. Manuals ... moreand software might not be included, but can usually be downloaded from the manufacturer. These items can be in the original manufacturer box or repackaged for protection during shipping. Please note. The pictures used are intended to be a representation of the model of product for sale, it is not the actual item. Please be sure to check the condition of the unit that is for sale. Features Model number KT-LFD-CC Product Name NEC KT-LFD-CC Color Calibration Kit Product Type Color Calibration Kit Compatibility NEC M46-2-AV. M46-2-AVT, M46-AVT, M46B-AV, M46B-AVT, M46B-TVX, S401, S401-AVT, S461, S461-AVT, S521, S521-AVT, V651, X461S, X462UN-TMX4D, X551S, X551UN NEC MULTEOS M46, M46-AV, M46-AVT, M46-IT NEC MultiSync LCD4020, LCD4020 with DST Touch, LCD4020 with Protective Glass, LCD4020-2-AVT, LCD4020-2-TVX, LCD4020-BK-AV, LCD4020-BK-AVT, LCD4020-BK-IT, LCD4020-TMX4, LCD4620, LCD4620-2-AV, LCD4620-2-AVT, LCD4620-2-TVX, LCD4620-AV, LCD4620-BK-AV, LCD4620-BK-AVT, LCD4620-BK-IT, LCD4620-TMX4, LCD5220, LCD5220-AV, LCD5220-AVT, LCD5220-IT, LCD5220-TMX4, LCD5220-TVX, LCD6520L, LCD6520L-BK-AV, LCD6520L-BK-AVT, LCD6520L-BK-TVX, LCD6520P, LCD6520P-BK-AV, P401, P401 DST Touch, P401-AVT, P401-
Mitutoyo 17” Outside Micrometer Standard, Calibration Stick 167-157
Mitutoyo 17” Outside Micrometer Standard. Calibration Stick This is a used Mitutoyo Calibration Stick. Or Outside Micrometer Standard. It is Model 167-157 and 17” long. My auctions are mostly used items and sold“as is” My auctions start low with NO RESERVE. Check my other auctions. I will combine multiple auctions for shipping if possible. I will guarantee satisfaction of items per my description. I will give full refund if item is not as I described it. Email me first for permission to return. USPS Shipping Info- I will ship this item USPS Priority Mail with Delivery Confirmation for $5.00 in the 48 states. I accept PayPal only. Or Pay on Pickup for local buyers. International Buyers must pay by PayPal; use the eBay shipping calculator or contact me for shipping method and charges. I usually ship by next business day after receiving payment. ... moreI will guarantee satisfaction of items per my description. I will give full refund but International Buyers must pay for Return Postage. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Powered by The free listing tool. List your items fast and easy and manage your active items.
STANTON 681 TRIPLE E S TYPE THE A&R CALIBRATION STANDARD W STYLUS
STANTON 681 TRIPLE E S TYPE THE A&R CALIBRATION STANDARD W STYLUS. See pics.
SERAPHIN TEST CAN CALIBRATION FIELD STANDARD MEASURE 19 LITERS -5 GALLONS
SERAPHIN TEST CAN CALIBRATION FIELD STANDARD MEASURE 20 Liters/ 5 Gallons The glass measure is intact. Height: 25" Width: 11" If you have any questions. Please write. Check out my! G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e7406244e-0x101-
Ultratech Stepper XY Stage Calibration Microscope XY Alignment Stage Crosshair
Ultratech Stepper XY Stage Calibration Microscope XY Alignment Stage Crosshair Description Ultratech Stepper XY Stage Calibration Microscope Manual Tunable Alignment Crosshair Microscope Vacuum Positioning XR YL YR Alignment Stage Sensor Platform PN 10-20-02834 2 Objectives. 10X and 60X 1 Eyepiece 10X Manufacturer Ultratech Stepper Manufacturer Part Number XY Stage Calibration Microscope Item/Ship Weight 18 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended ... morepart numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping We will professionally package. Using instapak foam-in-place if needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. PID 31147 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the
CUMMINS MAY 2008 INCAL CALIBRATION DVD MANUALS INSITE
CUMMINS INCAL CALIBRATION DVD 2 SIDED DVD MAY 2008 DISK MIDRANGE ON 1 SIDE AND HEAVY DUTY AND HIGH HORSEPOWER ON THE OTHER. ALSO CONTAINS SPECIAL FOLDERS ON THE DVD WITH INFORMATION ON CUMMINS PRODUCTS. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e75dce3ae-0x106-
MOORE & WRIGHT 0-50mm Outside Micrometer Plus Calibration Disc - Original Case
This auction is for the following item: This two-range micrometer is manufactured by MOORE& WRIGHT in Sheffield. England, Great Britain. It is in good mechanical condition with only superficial marks to the black paint finish of the micrometer's body. Two interchangeable anvils are provided- one to give 0-50mm range and the other for 25-50mm. Both are in good condition. Also provided is a 25mm diameter precision calibration disc and a pair of forked tools for removing and refitting the anvils. The original sturdy wood case/ box is lined with green felt and has a slide type lid with thumb notch. Please examine the high-resolution pictures shown below: Box/ case size: 21cm L x 9.5cm D x 3.5cm H- Boxed weight: 545grams. Low Start- Bid with confidence- Good luck!
MRL Magnetic Reference Laboratory 1/4" Calibration Tape AMPEX ATR Otari
MRL calibration tape for 1/4" deck. Please inspect pictures for more information. Check out my!
Trimble 605 Total Station with calibration certificate
Trimble 605 total station in very good condition.Works perfectly with calibration certificate. It includes CU Keyboard with various Programs New BACKUP BATTERIES for the Total Station and the CU Keyboard. This sale includes: Trimble 605 total station in very good condition. Works perfectly with calibration certificate Trimble CU Keyboard with various programs 2 x Batteries 1 like new(just changed the accumulators) the other used but working. New Backup Batteries for the Total Station and the CU Keyboard. Charger Cable Original carrying case Programs in the CU keyboard: P 20- Station Establishment, P 21- Z7IZ, P 22- Angle Measuring, P 23- SetOut, P 24- RefLine, P 25- Area Calculation, P 26- DistOb, P 27- Moving Coordinates Forward, P 28- Obstructed Point, P 29- RoadLine, P 30- Measure Coordinates, P 32- Angle Measurement Plus, P 39- RoadLine ... more3D, P 40 P41 P43 P45 P54 P55 P61 P65.
Renishaw ML10/XL80 Laser Interferometer Calibration Optics Machine Tools & CMMs
Powered by Frooition Pro Shop Search. Click to close full size. Item Description. Renishaw ML10/XL80 Laser Calibration Optics Straightness Accessory Kit These optics facilitate measurements on vertical axes and in other difficult configurations. Each straightness accessory kit contains: 1 fixed turning mirror, 1 large retroreflector, 1 LS350 beam steerer, May require Universal(straightness) shutter or straightness accessory kit. Depending upon application. Renishaw ML10/XL80 Laser System optics are in excellent shape and are fully functional with warranty. Renishaw current retail price for this kit is $3583.00 This is a great price for used Renishaw ML10/XL80 Laser Calibration Optics. Purchase with confidence from a Paypal verified retailer with 90 day Warranty. If what you order is not what you receive you will be refunded the full purchase ... moreprice for this sale. Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw product needs. If you have any questions feel free to contact us. With 24 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support. About Us Payment Shipping Terms Returns Helpful Links. More Items! Frooition www.frooition.com | eBay design. EBay store design, eBay shop design, eBay template design, eBay listing design. This listing is currently undergoing maintenance. We apologise for any inconvenience caused.
TAYLOR HOBSON 112/2062-02 PRECISION CALIBRATION RADIUS BALL 12.4964mm 0.49198"
You are buying a used Taylor Hobson Precision Calibration test ball P/N 112/2062-02 with 12.4964mm(0.49198" radius in a two piece stainless steel protective mount. This item ships free to all 50 states. C2
JVC Pro-cision 19u Head Active Video Calibration Plug & Play VHS HR-VP453U
JVC VCR works great. Comes with a cable for RF out. Posted with,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13e7ec21066-0xf3-
Craftsman ? 2-3" outside mics.Made in U.S.A. w/calibration gauge. .001" w'click
From a retired machinist. Nice used 2-3" ouside mics with calibration tool. Measures in.001" and click end. Also recently calibrated. Not positive of make. Believed to be Craftsman but am not sure. No case or box. Does say Made in U.S.A. Buying as is and warranty or return. Check out my!
Mitutoyo Caliper Case 505-626 Hard Calibrate Calibration Parts Inspection
Here is an old school Mitutoyo case. Spring closure clamps shut crisply. Velvet interior has some black marks from normal wear but can probably be cleaned. 505-626. Buyer to pay $7 shipping/ handling to lower 48.
Geodimeter Survey Total Station 506 Fresh Calibration, New Battery, Warranty
We do business under two eBay user accounts. Please check both! ussurveysupply and us-survey-supply Why Buy From US Survey Supply? EVERY INSTRUMENT WE SELL IS ACTUALLY IN OUR INVENTORY. WE DO NOT DO"CONTRACT SALES" ON INSTRUMENTS THAT HAVE NOT COME INTO OUR SHOP AND GONE THROUGH OUR RIGOROUS QUALITY-CHECK PROCESS. PLEASE MAKE CERTAIN THAT YOU ARE DEALING WITH A DIRECT-CONTACT EQUIPMENT DEALER. OTHER GREAT REASONS: 1. We support our customers. 2. We have the best techs in the business. 3. Our instruments are all professionally cleaned. Calibrated, and fully tested. 4. We stand behind what we sell. 5. Lots of positive feedback on eBay Sales of Total Stations. Data Collectors, and Accessories. Please feel free to call us: 866-US SURVEY[866-877-8783] from North America 1-541-404-6825 from anywhere else About US We have been in business ... moreas a supplier of premium USED and NEW surveying equipment since 2001. We are an authorized dealer for Sokkia. Carlson, SiteComp, Seco, and other manufacturers. If you don't see what you're looking for here. Please email us. We have many items in inventory beyond what's advertised here. TOTAL STATIONS- ROBOTICS- GPS- DATA COLLECTION- SOFTWARE Geodimeter 506 Total Station with 6" Accuracy. Two-Speed Tangents, Re-Celled Battery, New Backup Battery and Fresh Calibration This solid 6" instrument features optical plummet tribrach. Two-speed tangent controls, guide lights to assist stakeout positioning, a good selection of programs including stake out. Good and clean condition. Includes: Geodimeter Geodolite 506 Electronic Total Station Trimble Optical Plummet Tribrach 240-120V Charger Instrument Battery with new cells Leica 62mm Prism and Pole This gun is freshly calibrated for this sale. It turns angles dead on. And distance shots are perfect. Includes a 30-day warranty. This instrument is in good working condition with normal wear. Flaws noted: Hz Tangent Lock knob has been whacked at some point and is slightly skewed. As identified in close-up photo. This d
CMM PROBE CALIBRATION STANDARD REFERENCE DATUM BALL 3/4" DIA X 2" LONG
CMM PROBE CALIBRATION STANDARD REFERENCE DATUM BALL 3/4" DIA X 2" LONG ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3226 THERE IS A $15.00 HANDELING FEE INCLUDED IN ALL INTERNATIONAL SALES
ZB) XRite X Rite Eye One i1 Display 2 Professional Monitor Calibration Device
ZB) +XRite X Rite Eye One i1 Display 2 Professional Monitor Calibration Device Description: X-Rite X Rite Eye-One i1 Display 2 Professional Monitor Calibration Device X-Rite Eye-One i1 Display 2 professional LCD and CRT monitor calibration device. The unit is in excellent used condition. It includes only what is pictured. The software is available from the X-rite web page. We always have a variety of merchandise and unique collectibles on eBay- Please check out my other auctions. I always combine shipping! Thank you! This item comes from my smoke-free home. If you live in Virginia you will be charged 5% Virginia Sales Tax. Payment: Please note that you are guaranteed that the item I am selling is as I describe it. Bid with total confidence. Visit my Store. Be sure to add me to your favorites list! Check out my other items! Normal 0 false ... morefalse false MicrosoftInternetExplorer4 We always have a variety of merchandise and unique collectibles on eBay- Please check out my other auctions. I always combine shipping! Thank you! This item comes from my smoke-free home. Normal 0 false false false MicrosoftInternetExplorer4 Payment must be received within 5 days of the auction close. Items are described as best as possible. Items sold"as is" Please contact me if payment will be delayed. High bidder to pay via PayPal. Virginia residents need to add 5% sales tax. IF YOU HAVE CONCERNS AFTER RECEIVING YOUR ITEM. PLEASE CONTACT ME IMMEDIATELY BEFORE LEAVING FEEDBACK. Shipping: Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Now for the small print- I am a FIVE STAR SELLER but in order for me to keep that position. EBay states that I must educate you on being a Five Star Buyer- Please read eBay's buyer information pages for your requirements( http:pages.ebay.com/buy/resources.html) Please forgive the volume of information below. SHIPPING: I try to be totally transparent in my shipping price
Meyer Gage Pins M-1 Minus .061" / .250" Co COMPLETE WITH CALIBRATION CERTIFICATE
Item: Meyer M-1.061/250 Gage Set Description: This set is in fair condition.There is discoloration of the foam as visible in the photo There are no significant damages to mention but there are marks and scratches from previous use wear. We've taken several pictures for your consideration. Auction Includes: Everything shown in the pictures. INCLUDE CERTIFICATE PLEASE SEE PICTURES FOR MORE DETAILS. Auction form all items listed are As Found and As-Is. This allows you to find multiple items at bargain prices. Some items are new but many items we sell are antique. Vintage, and collectible! Please have reasonable expectations ie: most are older, used and may not be perfect(although some are! and we try to describe things accurately. We provide the needed photos, but, in spite of our best intentions, we may miss something so please ask if you ... moreare unsure before you bid! Sales are FINAL- items are SOLD AS-IS- some cleaning and any repairs are left to the buyer! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13e8c00fe73-0xf8-
Applied Materials 0020-13047 WAFER ALUMINUM CALIBRATION DISC PCB
Applied Materials Aluminum Wafer Calibration Disc model: 0020-13047 condition: Came from a school liquidation. Untested, selling AS-IS for parts or repair We are business liquidators. We are not the original purchasers. Owners, or operators of this equipment. We sell out items AS-IS, no warranties, guarantees expressed or implied(this is exactly how we buy our items) These items are used, do not assume they will be in brand new mint condition, they will show normal use and wear which means minor scratches, scuffs, or blemishes and maybe dusty from storage, etc. Please take this into consideration when placing a bid or best offer. Please ask ALL questions BEFORE bidding or submitting a best offer We try our best to describe our items as accurately as possible with pictures and description ALL REASONABLE OFFERS CONSIDERED! Buyer pays shipping
Mitutoyo Gauge Block size 10mm, No. 935445, wt calibration sticker
For sales is one piece in box like new condition Mitutoyo brand Gauge Block. size: 10mm. No. 935445. Comes with calibration sticker Powered by
Fowler Sylvac D-25 Digital Display Calibration Indicator with PROBE
Fowler Sylvac D-25 Digital Display Calibration Indicator with PROBE 120v 100v 5w With an over a $1000.00 54-618-500 Fowler Sylvac P25 Probe 1"25mm. Includes case Used. Fully tested MINT CONDITION! Note: Listing Picture is the exact GEAR WITH ORIGINAL BOX! Will not last long! Also please specify if you would like original box or items might be shipped without original box. Also, I might have more of the same item then listed; please let me know if you are interested in more or even a similar item not listed and I will check our inventory. On May-02-13 at 21:42:12 PDT. Seller added the following information: No. 54-618-350/355& Specifications No. 54-618-345/346 No. 54-618-360/365 No. 54-618-400/444 No. 54-618-500 No. 54-618-700 Linear measuring range.080" 2mm) 2" 5mm) 4" 10mm) 1" 25mm) 2" 50mm) Measuring force ... more0.60-0.75 N 0.60-1.20 N 0.6-0.8N 0.6-1.0 N 0.5-1.1 N Permissible lateral force 0.7 N 0.7 N 0.6 N 0.3 N 0.25 N Repeatability(±2s) 00001"0002mm.00001"0002mm.00001"0002mm.00001"0002mm.00002"0004mm Coefficient of thermal expansion.01μm/°C.01μm/°C.02μm/°C.01μm/°C.01μm/°C Temperature range 0-50° C 0-50° C 0-50° C 0-50° C 0-50° C Cable length 5' 1.5m) 5' 1.5m) 5' 1.5m) 5' 1.5m) 5' 1.5m) Contact point thread M2.5 M2.5 M2.5 M2.5 M2.
SLS QG-500MIC Calibration Microphone for Denon DM-A405 DM-S305 DM-S205
SLS QG-500MIC Omnidirectional Microphone This calibration microphone was only used a few times and it works great. I purchased it to calibrate a used Denon AVR that came without a setup mic and no longer need it. Features Originally distributed for SLS superior audio loudspeakers Replacement setup microphone for Denon DM-A405 DM-S305 DM-S205 Rugged metal construction adds weight to stabilize mic during setup. Resulting in superior calibration 1/4" thread for mounting on tripod 3.5mm mono plug 18 foot cord
Tesa Calibration Standard Standards 800mm Swiss
Up For Sale: 1 Used Tesa Calibration Standard Standards 800mm Swiss made. Unit has a small number engravings. Accept that it appears to be in good condition. Sold with 14 days Warranty. Thank for looking. Buy with confidence. TERMS& CONDITIONS If you choose to bid on this item. You are agreeing to the terms and conditions below: PAYMENT: Please pay immediately after the auction has ended You will be invoiced for your purchase once the auction has completed. METHODS OF PAYMENT: We accept PayPal only We will wait for payment to be clear before shipping out your item. SHIPPING: All goods are sent in secure packaging. We pack our items professionally. We provide the best quality shipping available. Using professional shipping materials. Your item is usually shipped the next business day at the latest. We ship WORLDWIDE. Accept for a few countries) ... moreWe will gladly combine multiple auction winnings to save on S&H fees. If you have or expect to win multiple items. Please email us as soon as possible and list the item#s you have and/or expect to win and we will send you an invoice after all items have ended. RETURN POLICY: If you have a discrepancy with the item once it has been shipped to you. Please let us know, we will try to help you out. Our winning bidders are our Top priority; we want to make sure that you are more than satisfied. If you have any questions just ask, we are nice and friendly and will be glad to answer all of your questions in a timely manner. Sales Tax: All Buyers from Israel- Must add 15.5% VAT(Ma'am" Customs/Taxes/Duties: If your customs office/government charges additional taxes you are responsible for those. We have no way to know if. When or how much that will be. Please consult your local customs office or government for more information. 100% Satisfaction Guarantee: Your satisfaction is always 100% guaranteed. If you are not satisfied with this product. Please send it back for exchange or refund within 10 days of item's arrival. Like you see we are selling products from d
CMM Calibration Standard 38mm (1-1/2") Ball 78mm (3") Neck 158.75mm Total Height
CMM Calibration Standard 38mm(1-1/2" Ball 78mm(3" Neck 158.75mm(6-1/4" Total Height Including Feet Item is in Good Condition This Listing is for(1) CMM Calibration Standard USED. ShelfG14 02132100GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the ... morevalue of your item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e8fe518b7-0xfe-
Heathkit Thermo Spotter Model MI-104 Assembly & Calibration Instructions 1971
Heathkit Thermo Spotter Model MI-104 Assembly& Calibration Instructions 1971 Description: Heathkit Thermo Spotter Model MI-104 Assembly and Cali b ration Instructions published in 1971. 8.5"x11" unfolding to 17"x22" Includes instructions for assembly. Troubleshooting and parts list. The instructions have some stains and browning from age but are readable and usable. see photo) Shipping: Buyer pays shipping as shown lower 48 states. Multiple purchases will be combined when/extent as possible to save on shipping.your invoice will have the corrected shipping charge for multiple purchases. If you have purchased multiple items. Or are planning on purchasing items, let me know so that I can invoice with combined shipping. Payment: Safety disclaimer: Buyer agrees to use appropriate safety practices when using all items. Buyer ... moreagrees that electronic items will be installed/inspected by qualified technician using proper safety techniques. Our goal is to make sure you are satisfied with every purchase. Click to Enlarge inkfrog terapeak.
CHRISTIAN BECKER- MASTER CALIBRATION WEIGHT - CLASS S 10 KG-EXCELLENT CONDITION
CHRISTIAN BECKER- MASTER CALIBRATION WEIGHT- CLASS S 10 KG EXCELLENT CONDITION WE COMBINE SHIPPING WHENEVER POSSIBLE WE ACCEPT CREDIT CARDS. COMPANY AND PERSONAL CHECKS WE HAVE A LARGE INVENTORY OF INSPECTION. CALIBRATION AND TESTING EQUIPMENT PLEASE CALL 860-242-4953 FOR ASSISTANCE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e919aad63-0xff-
STEC SEC-4400MC-SUC Ar 5LM Mass Flow Controller MFC 1/4" VCR N2-Calibration
Search our eBay Store! STEC SEC-4400MC-SUC Ar 5LM Mass Flow Controller MFC 1/4" VCR N2-Calibration SKU: JV-JIM-B-SEC44MCSUC Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge STEC SEC-4400MC-SUC Ar 5LM Mass Flow Controller MFC 1/4" VCR N2-Calibration Model: SEC-4400MC-SUC Physical Condition: Some scuffs and scratches. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Dimensions(L" x W" x H" 5* 5* 1 1/4 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. ... moreMILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please
Quest Audiometer Calibration Kit155/145 AA175 Test Set
Item is a Quest Audiometer Calibration Kit in very good condition. This kit belonged to an infrequent user and was very well maintained in pristeen condition. Plus 2CC coupler for insert phone calibrations and Pelican carry case not shown. Everything needed to Calibrate Audiometers. I only have the 155/145 all manuals are included. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e92826322-0x104-
Sto-A-Weigh Calibration Set
Sto-A-Weigh Calibration Set Barely used has 1 1 gram 2 2 gram 1 five gram one ten gram teo 20 gram and one 50 gram weight as shown in picture
Honeywell Lumidor MicroMAX Plus Model MPLUS-4ABCD & Calibration Kit New O2
Honeywell Lumidor MicroMAX Plus Model MPLUS-4ABCD& New Calibration Kit. New O2 sensor just installed. Was used very little if at all. Ships in the contiguous United States only.