|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States The Maximum Lap Count Is 99999. This Coil Winding Machine Is Suitable for Motor Winding, Spring Winding, Cotton Winding, Ribbon Winding. Do You Want to ... moreImprove Your Work Performance?. Do You Want a More Precise and Efficient Coil Winding Machine?.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: China Not easy to hit the teeth, long life. Low-speed micro AC 220V/60KTYZ permanent magnet synchronous motor/gear motor/14w 5-turn electric motor.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Role: 3 series 12.6V 40A lithium battery protection board. Note 1: The successful start of electric drill requires three 15C-20C power batteries, or six ... more10C-15C power batteries (ordinary 18650 can not start drill! ).
Buy It Now
Free Shipping Condition: New Location: China Capacity: 680UF. 2.8V 3000F Screw Hole Super Capacitor Automotive Eelectronic Rectifier Capacitor. 10PCS/1Set 27V 12F Double Row Farad Capacitor Super ... moreCapacitor 2.7V120F Capacitor. 6PCS/1Set 2.7V 500F Super Farad Capacitor 16V 83F Large Capacity Farad Capacitor.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$6.00 Shipping Condition: New Location: Chino, United States This Coil Winding Machine Is Suitable for Motor Winding, Spring Winding, Cotton Winding, Ribbon Winding. Do You Want to Improve Your Work Performance?. ... moreDo You Want a More Precise and Efficient Coil Winding Machine?.
Buy It Now
Free Shipping Condition: New Location: China Encoder and external coupling should avoid rigid coupling, but should use flexible coupling, use gear or timing belt coupling transmission. Application ... moreareas.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: Brand New Location: China 1 x DC 12V 8Ch RS232 Relay Board. Communication protocol: UART protocol communication, baud rate 9600kpbs, 8 data bits, one stop bit, no parity. Two-way ... moredata transmission. Output indication : relay output with LED indicators,easy to see working status of the relay;.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States It can be used for manual winding of a variety of small coil and winding various coils tape. Hand Winding Machine NZ-1 131088. #4 Handle and the manual ... morerotation winding. #2 The counter reset, adjust here"#5 " can be wiped clean.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Supports WiFi network. Indicator: With a signal indicator, relay pull the light. Board consumption:
Buy It Now
$3.53 Shipping Condition: Brand New Location: China What is this?Enamel wire is an electromagnetic wire used in electronic circuits, motors and transformers, low-frequency signal transmission, refrigerators, ... morefreezers, air conditioners, washing machines, vacuum cleaner motor windings, power tools, etc.What will I get?Enamel wire, is in size of : 0.15mm dia, 600m/1969ft total length, 100gIn the package of: 1pcs x Enamel wireIs there any advantages of the product?Enamelled wire has direct solderability, good high-frequency resistance, easy coloring, and good moisture resistance. It is widely used in electronic appliances, precision instruments, telecommunications, and instrumentationHow to use it?Steps of installation: 1. Choose the appropriate specification of enameled wire; 2. Cut to the desired length; 3. UseWhat should I notice?Please select the enamelled wire with proper size.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$3.53 Shipping Condition: Brand New Location: China What is this?Enamel wire is an electromagnetic wire used in electronic circuits, motors and transformers, low-frequency signal transmission, refrigerators, ... morefreezers, air conditioners, washing machines, vacuum cleaner motor windings, power tools, etc.What will I get?Enamel wire, is in size of : 1.7mm dia, 8m/26ft total length, 200gIn the package of: 1pcs x Enamel wireIs there any advantages of the product?Enamelled wire has direct solderability, good high-frequency resistance, easy coloring, and good moisture resistance. It is widely used in electronic appliances, precision instruments, telecommunications, and instrumentationHow to use it?Steps of installation: 1. Choose the appropriate specification of enameled wire; 2. Cut to the desired length; 3. UseWhat should I notice?Please select the enamelled wire with proper size.
Buy It Now
$2.99 Shipping Condition: New Location: China Silver-plated twisted copper wire. The copper wire is twisted with high density and is full of cores. Conductor: Silver-plated stranded copper wire. Shield: ... moresilver-plated copper wire. The partial copper core rate is low.
Buy It Now
Free Shipping Condition: New Location: United States 1 x Changeover Switch. Color: Blue.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This usb coupler is made of premium material, which can withstand long-lasting use. This usb coupler will make device connection easier and smoother. ... more- Easy installation: fast connection, no welding, no installation tools, just plug directly into the standard USB head for quick installation.
Buy It Now
$4.00 Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$3.53 Shipping Condition: Brand New Location: China What is this?Enamel wire is an electromagnetic wire used in electronic circuits, motors and transformers, low-frequency signal transmission, refrigerators, ... morefreezers, air conditioners, washing machines, vacuum cleaner motor windings, power tools, etc.What will I get?Enamel wire, is in size of : 1.12mm dia, 11m/36ft total length, 100gIn the package of: 1pcs x Enamel wireIs there any advantages of the product?Enamelled wire has direct solderability, good high-frequency resistance, easy coloring, and good moisture resistance. It is widely used in electronic appliances, precision instruments, telecommunications, and instrumentationHow to use it?Steps of installation: 1. Choose the appropriate specification of enameled wire; 2. Cut to the desired length; 3. UseWhat should I notice?Please select the enamelled wire with proper size.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: China Model CM400HA-24H UPC Does not apply Brand Mitsubishi MPN CM400HA-24H.
Buy It Now
Free Shipping Condition: New Location: Denver, United States 26 AWG Flexible Silicone Wire Electric Wire Hook up Wire Kit 300V Cables with plus 20 Φ3Mm Heat Shrink Tubings and a Mini Wire Stripper(5 Colors 32.81Ft ... moreEach Color, 26AWG). Size 26 AWG silicone wire. Flexible Silicone Stranded Wire Spool, Electrical Hook Up Wires - Five Colors.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Radial Electrolytic Capacitor 220uF 25V. Capacitance: 220uF. Maximum Temperature: 105°C. From Source to Stream, Plumbing Dreams Unleashed. Solar Panel. ... moreBattery Energy Storage. Motor & Power Transmission.
Buy It Now
Free Shipping Condition: New Location: China Description 100% Brand New. Operating voltage: DC12V(27A/12V battery x1) Operating Current: 10mA@ 12V Radiated power: 10mw@ 12V Size: 6.2 x 3.8 x1.4cm(LxWxD) ... moreModulation mode: ASK(Amplitude Modulation) Transmitting frequency: 315MHZ(SAW frequency stabilization) Transmission distance:50-100M(Open field the receiver sensitivity-100dbm) Encoder types: fixed code The frequency of this product is 315 mhz. With decoding receiver board 1.The operating voltage DC5V. Receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: 6*22*41mm There are four buttons on the remote control. And respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package Included: 1 x IC 2262/2272 4 CH Key Wireless Remote Control Kits Receiver module F Arduino(including a Button batteries) Recommended Products $4.60 Time left:9d 7h 58m. $8.60 Time left:23d 10h 55m. $1.95 Time left:23d 10h 44m. $5.33 Time left:9d 3h 17m. $5.66 Time left:10d 21h 26m. $10.96 Time left:2d 22h 53m. $14.07 Time left:1d 2h 35m. $5.43 Time left:25d 2h 23m. $4.74 Time left:8d 2h 42m. $1.07 Time left:3d 1h 27m. $5.98 Time left:28d 0h 16m. $3.90 Time left:23d 10h 49m. $3.43 Time left:3d 21h 40m. $4.31 Time left:27d 0h 47m. $1.33 Time left:9d 8h 15m. $2.25 Time left:3d 22h 25m. $15.36 Time left:1d 2h 35m. $1.11 Time left:3d 1h 51m. $2.46 Time left:16d 11h 11m. $4.34 Time left:3h 25m. $13.96 Time left:15d 2h 34m. $3.42 Time left:9d 8h 24m. $5.37 Time left:3d 22h 25m. $1.36 Time left:16d 11h 7m. $17.11 Time left:28d 0h 16m. $9.96 Time left:12d 23h 44m. $18.60 Time left:13d 0h 23m. $6.20 Time left:7d 1h 14m. $13.32 Time left:1d 2h 35m. $8.99 Time left:28d 9h 0m. $2.96 Time left:3h 12m. $22.56 Time left:18d 18h 59m. $4.52 Time left:12d 10h 34m. $9.69 Time left:3h 12m. $5.85 Time left:12d 1h
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Denver, United States 1000uf 25v capacitor Marking Temperature:0-105 ℃. From Source to Stream, Plumbing Dreams Unleashed. Body Size : 10 x 17mm/ 0.39" x 0.67" (D L);Lead Spacing ... more: 4mm/ 0.16";Lead Length : 26mm/ 1.02", 20mm/ 0.79".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$4.86 Shipping Condition: New Location: China SQ8 HD 1080P. Motion detecting video:720P and 1080P. WIFI Module. Capacity&Resistor SMD SMT. 1 X Mini Camcorder. Lithium battery PCB board. Lithium Battery. ... moreSteam brush.
Buy It Now
$3.20 Shipping Condition: New Location: China JDY-10 Transparent module is based on the Bluetooth 4.0 protocol standard, the working frequency band is 2.4GHZ, the modulation mode is GFSK, the maximum ... moretransmission power is 8db, the maximum transmission distance is 80m, with low power consumption, small size, strong signal, data transmission Stability and other characteristics.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Weight: 2.74kg/6.04lbs Size(Lxwxh): 9.7x9x18cm/3.81x3.54x7.62in Max Width: 28cm/11.02in Material: Cast Iron Frame, Steel Gear Max Diameter: ... more15cm/5.9in Maximum Width: 10cm/3.93in Wrap Wire Diameter: 0.02-2.6mm Count Range: 0-99999 Transmission Ratio: 1:8, 1:1 How to Use 1. You Should Put the Wires on the Axis. 2. Check If All the Gears Are in the Right Place. 3. Add some Oil to the Oil Hole. 4. Turn the Handle. Package Included 1 X Coil Counting and Winding Machine.
Buy It Now
Free Shipping Condition: New Location: Joliet, United States
Buy It Now
$2.99 Shipping Condition: New Location: 天河区, China Communication protocol: UART protocol communication, baud rate 9600kpbs, 8 data bits, one stop bit, no parity. Two-way data transmission. You might need ... moreaccessories :USB to RS232 ;. Relay toggle (Relay status reversal,if COM connect to NO,this commands will Disconnect COM to NO and Reverse COM connect to NC,and vice versa).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Welcome to our store, we have high-quality pre-sales and after-sales service. Before you buy this Item, you can contact us if you have any questions, ... moreand we will answer you in time. I wish you all the best.
Buy It Now
Free Shipping Condition: New Location: Ridgewood, United States Good insulation performance with high temperature resistance. Uses high-quality copper parts having good electrical conductivity.
Buy It Now
Free Shipping Condition: New Location: Bronx, United States BUSBAR is a conductive component commonly used in the fields of power systems, distribution cabinets, switchgear, and others. BUSBAR usually has multiple ... moreconnection points and can be connected to multiple power devices or circuits, allowing for safe and efficient power transmission without affecting circuit performance.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Material: PP, Silver Alloy. Application: Outboard Motor, Cabinet Machine. If you do not receive our reply within 48 hours, pls. If you are ... moresatisfied with our service, pls.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: China Easy installation and long using life. - Hinge Roller Lever Length : 18mm/0.7". on off Red Toggle Waterproof Switch Panel Automotive Rocker. : 2mm / 0.08". ... more2 Pcs Acrylic Decorative Garden Inserts Rooster Yard Stakes.
Buy It Now
Free Shipping Condition: New Location: China 2/5pcs CP2102 USB Serial Adapter Module USB to TTL with DTR Pin STC Downloader Module+6P Dupont Cable for Windows Arduino Description: Use SILABS CP2102 ... morechip company With RXD TXD RST 3.3V 5V DTR DCD RI RTS CTS and other full-featured interfaces With 500mA resettable fuse design With power indicator light Line computer USB interface design, you can not use the computer adapter cable or extended. DuPont line, you can link directly to the customer's target board. Convenient and flexible Transmission speed 115200bps easily qualified, definitely more than PL2303 To borrow a computer USB power supply, 3.3V and 5V power output can be provided directly to the user target board Note: RXD TXD marked some non-standard equipment, even if not directly, please cross-connect.
Buy It Now
$5.35 Shipping Condition: New Location: Rochester, United States 941D621 (3v - 12v) RATIO 62:1. 24 volt versions are available for this range of motor-gearboxes. Performance data is similar to 12 volt versions. This ... moreversion also has an extended 10mm rear shaft to accommodate motor encoders.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The Maximum Lap Count Is 99999. This Coil Winding Machine Is Suitable for Motor Winding, Spring Winding, Cotton Winding, Ribbon Winding. Do You Want to ... moreImprove Your Work Performance?. Do You Want a More Precise and Efficient Coil Winding Machine?.
Buy It Now
$3.73 Shipping Condition: New Location: China 1x12v 10A relay 2CH wireless RF Remote (Without battery). Output data to achieve the trigger flip state. Successfully received the data can have been. ... moreReceiver sensitivity:>-105dB. Maintain the state of the corresponding level.
Buy It Now
Free Shipping Condition: New Location: New York, United States Flexible Silicone Stranded Wire Spool, Electrical Hook Up Wires - Five Colors. Silicone wire is very elastic and not easy to break. 5pcs 22 Gauge Silicone ... moreStranded Wire (red, black, yellow, blue, green).
Buy It Now
$15.12 Shipping Condition: Used Location: Bardstown, United States (Local Machinery Moving Services. machinery VIEW ALL. Complete Robotic Systems. Conditions). What We Do. Industrial Demolition. Our Services. Industrial ... moreParts R Us Inc.
Buy It Now
$5.73 Shipping Condition: New Location: China Image: HD 1080P. Network：WIFI wireless transmission (supports IEEE802.11b/g/n wireless protocol). ✔【2.4GHz Wi-Fi & Maximum Capacity Storage】 The wifi ... moremonitor supports wired & wireless installation with ONLY 2.4GHz Wi-Fi.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Role: 3 series 12.6V 40A lithium battery protection board. Note 1: The successful start of electric drill requires three 15C-20C power batteries, or six ... more10C-15C power batteries (ordinary 18650 can not start drill! ).
Buy It Now
$4.31 Shipping Condition: New Location: China Suitable for overlock sewing machine, overlock sewing machine, sewing machine. Sewing machine motor drive V-belt MB series. Color: as pictured.
Buy It Now
$15.12 Shipping Condition: Used Location: Bardstown, United States ITEM DESCRIPTION 1 NEW NORDSON 270632J PRINTED CIRCUIT BOARD. SEE PHOTOS. T2-1. IMPORTANT* We are unable to test any of our electrical equipment within ... moreour warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any INTERNATIONAL OVERNIGHT SHIPMENTS. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selec
Buy It Now
$3.53 Shipping Condition: Brand New Location: China About the product:The DC converter regulator is a reliable power transformer. It has the characteristics of large input voltage, low power consumption, ... morehigh efficiency, and high reliability. Widely used in industrial, automotive, instrumentation, communication, such as golf carts, forklifts, cars, trucks, motors, communications, ships, yachts, solar energy systems, wind power generation systems, etc.Good choice for you:1. Die-cast aluminum shell, epoxy potting, cooling by free air convection, shock-proof and moisture-proof. Waterproof grade IP68, small size, and lightweight.2. 100% full power stable current output, non-isolated module. Low power consumption, high efficiency, and high reliability.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
$3.59 Shipping Condition: New Location: China Magic Cube. Capacity&Resistor SMD SMT. Lithium battery PCB board. Lithium Battery. Steam brush. Makeup brush. Li-ion Battery. Battery Case.
Buy It Now
Free Shipping Condition: New Location: China ESP32 2.8" TFT Touch Screen Display ESP-32 WIFI BLE Dual Core Development Board Description: Use low-power dual-core 32-bit CPU, which can be used as ... morean application processor. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS Built-in 520 KB SRAM Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces Support OV2640 and OV7670 cameras, built-in flash Support picture WiFI upload Support TF card Support multiple sleep modes. Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click network configuration Support secondary development Package included: 1 X ESP32 2.8" TFT Touch Screen 1 set Other accessories See more in the flyfuntech2022.
Buy It Now
Free Shipping Condition: New Location: China Light Path: Reflective external optical path. -Includes the housing, spindel motor and laser pick up. Speed: low speed. Output Form: NPN type transistor. ... moreOperation mode: Single pulse. Channel: single channel.
Buy It Now
$17.78 Shipping Condition: Used Location: Bardstown, United States Allen Bradley 1492-CB2 G010 Circuito Interruttore, 1 Ampere, 277V AC, 2-Pole. Allen Bradley 140U-H2C3-C40 Ser. A Circuit Breaker, 40 Amp, 3-Pole. Eaton ... moreWMZT1C15 Circuit Breaker 15 Amp, 1 Pole, 277 V.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: Cast iron frame, steel gear Max Diameter: 150 mm Maximum width : 100 mm Wrap wire diameter: 0.02-2.6mm Count range: 0-99999 Transmission ... moreratio: 1:8, 1:1 Size(LxWxH): 9.7x9x18cm Instruction: 1. The machine should be placed on solid work on stage, stage face plate for wood, machine floor has three holes, used for fixed installation between native and workbench. 2. When used with his left hand pull (counter is reset to reset handle request reset handle pull twice,all of the counter gear Us into the reset state (or gear skid count) is not allowed, can start o Package Included: 1 x Coil counting and winding machine.
|
|
|
|
FALK GEAR REDUCER MIXER RAM 2080YBX2 - 21-1
FALK GEAR REDUCER MIXER RAM 2080YBX2- 21-1 $14.500.00 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE. Dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-141add0cc84-0xf8-
|
|
|
LARGE FALK REXNORD SHAFT MT HOLLOW BORE SPZS75B-22-4U 40 HP MOTOR
LARGE FALK REXNORD SHAFT MT HOLLOW BORE SPZS75B-22-4U 40 HP MOTOR $9700.00 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141add0ccfe-0xfd-
|
|
|
LARGE FALK RAM VERTICAL BEVEL MIXERS LBX LOW PROFILE DESIGN RATED 600 HP
LARGE FALK RAM VERTICAL BEVEL MIXERS LBX LOW PROFILE DESIGN RATED 600 HP $19.500 EA QTY 2 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE.
|
|
|
FALK GEAR REDUCERS 2110YB2 - 26-1
FALK GEAR REDUCERS 2110YB2- 26-1(GEARBOX ONLY 150 HP MOTORS EXTRA) $10. 900.00 EA SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE.
|
|
|
150 HP OIL GEAR HYDRAULIC PUMP/DRIVE
150 HP OIL GEAR HYDRAULIC PUMP/DRIVE EXCELLENT $7500.00 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE.
|
|
|
SURPLUS REXNORD PLANETGEAR MARS 6-1 RATIO
SURPLUS REXNORD PLANETGEAR MARS 6-1 RATIO $2500.00 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE.
|
|
|
REXNORD TL 2620B PERFECTION 20:1 143-145TC WORM GEAR REDUCER D263825
Brand: REXNORD Condition: Used Model: TL 2620B Type: Worm Gear Input Diameter: 7/8 IN Output Diameter: 1-1/8 IN Ratio: 20:1 Frame: 143-145TC Weight: 35.20 lbs Dimensions: 9 X 10 X 9.50 SKU: D263825 Category: Power Transmission· Gear Reducers Additional Notes: PERFECTION,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-141bd396e25-0xe8-
|
|
|
GRANT 300 STF 7/8 IN 1-1/4 IN 30:1 143-145TC WORM GEAR REDUCER D263843
Brand: GRANT Condition: Used Model: 300 STF Type: Worm Gear Input Diameter: 7/8 IN Output Diameter: 1-1/4 IN Ratio: 30:1 Frame: 143-145TC Weight: 45.80 lbs Dimensions: 9.50 X 9.50 X 10.50 SKU: D263843 Category: Power Transmission· Gear Reducers Additional Notes:
|
|
|
DRESSER 6E 37134 YG ELECTRA MOTORS 3/4IN 1-1/4IN 40:1 267A GEAR REDUCER D263788
Brand: Dresser Condition: Refurbished Model: 6E 37134 YG Input Diameter: 3/4 IN Output Diameter: 1-1/4 IN Ratio: 40:1 Frame: 267A Weight: 23.10 lbs Dimensions: 10 X 8 X 9.50 SKU: D263788 Category: Power Transmission· Gear Reducers Additional Notes: ELECTRA MOTORS
|
|
|
RELIANCE 56WG16A M333638001NT 10:1 56C WORM GEAR REDUCER D263760
Brand: Reliance Condition: Refurbished Model: 56WG16A M333638001NT Type: Worm Gear Input Diameter: 5/8 IN Output Diameter: 7/8 IN Ratio: 10:1 Frame: 56C Weight: 24 lbs Dimensions: 7 X 7.50 X 8 SKU: D263760 Category: Power Transmission· Gear Reducers Additional Notes: M333638001NT SPLINED INPUT
|
|
|
RBLT Westinghouse S9H 125 HP 105/23 Ratio 276 RPM 1.63 SF Gear Reducer 80R18961
Westinghouse Gear Corporation Gear Reducer Style: 80R18961 Catalog: S9H Service Rating HP: 125 Ratio: 105/ 23 Service Factor: 1.63 Output RPM: 276 Serial: 8102 Figure: 2 G/A: 9641D86G12 This Gear Drive was never put back into service after being fully rebuilt. We try to represent the items we sell as honestly as possible and include plenty of detailed pictures. If you buy from us we will do our utmost to make sure that you are completely satisfied. Anything bought from RCI comes with a 30 day warranty. If you need additional photos. They can be sent to you upon request. If you have any questions, we will do our best to answer them. Unit includes ONLY what is shown in picture(s) above unless otherwise noted. Our business has been in operation for over 2 5 years.
|
|
|
TIGEAR 2 GEAR REDUCER - 2.83 HP 20:1 1800 RPM 86.25 OUTPUT 26Q20R14
TIGEAR 2 GEAR REDUCER- 2.83 HP 20:1 1800 RPM 86.25 OUTPUT 26Q20R14. HP RATING: 2.83. RATIO: 20:1. INPUT RPM: 1725. OUTPUT SPEED: 86.25. APPROX SHIPPING WEIGHT: 105 LBS. ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close ... morefor any reason. We reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing
|
|
|
WINSMITH GEAR REDUCER - 9.14 HP 7.50:1 1800 RPM 240 OUTPUT 7SCTM
WINSMITH GEAR REDUCER- 9.14 HP 7.50:1 1800 RPM 240 OUTPUT 7SCTM. HP RATING: 9.14. RATIO: 7.50:1. INPUT RPM: 1800. OUTPUT SPEED: 240. APPROX SHIPPING WEIGHT: ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for any reason. ... moreWe reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool. List
|
|
|
KamoSeiko BR85US Ball Reducer 1:5 ratio
The item available here is a used KamoSeiko Ball Reducer that appears to be in very good condition. It has not been tested and comes with a 14 day return policy from the date the item was shipped. EXCEPT INTERNATIONAL SHIPPING. Postage is not covered. Here's the Specs: Type- BR85US Ratio 1:5 S# 080503 12 Items will be paid for immediately using PayPal. If you have zero feedback. Please contact before bidding, and if you have negative feedback, please don't bother bidding. Items purchased will be shipped using USPS and there will be a $4 handling fee to professionally package this item and cover insurance. Most items over $200 will require signature confirmation. International shipments are accepted. But NO RETURN policy when shipped outside of the USA and Canada. Send question for shipping rate, but I use USPS to ship. International ... moreand Canadian shipping will have a $8.00 handling charge to cover insurance. NO EXCEPTIONS.
|
|
|
eberhardt-denver speed reducers gearmotors MITERBOXS HELICAL REDUCERS catalog
THIS IS EBERHARDT-DENVER SPEED REDUCERS CATALOG#1015 WAS LOCATED IN SOUTH BEND INDIANA STAMPED ON FRONT OF CATALOG.IT SAYS AUTHORIZED DISTRIBUTOR HYDRA-MECH. INC.OUT OF DENVER COLORADO.FROM 1956.PLEASE SEE ALL PICS. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Kompass KB-101 Right Angle Drive 1: 1 Ratio MFG. NO. 91225003 Looks/Feels New
Item up for sale is a: Kompass KB-101 Right Angle Drive 1: 1 Ratio MFG. NO. 91225003 Looks/Feels New Item is used and is untested other than what is indicated below: Unit is assumed to be used- however may be new*Unit has minor marks on unit casing*Cosmetic imperfections should not affect unit operation*See actual product photos for greater detail If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. 2 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale Payment Options PayPal only or contact us for ... morepayment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check may be available. Contact us for additional information and fees. RETURNS Warranty for Items shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx groun
|
|
|
SUMITOMO DIRECT CURRENT MOTOR .75 KW + CYCLO DRIVE REDUCER
SUMITOMO DIRECT CURRENT MOTOR.75 KW + CYCLO DRIVE REDUCER Click Images to Enlarge SUMITOMO DIRECT CURRENT MOTOR.75 KW + CYCLO DRIVE REDUCER SHANK DIAMETER: 1-1/2" APPROX MEASURES: 23" x 12" x 10" PLEASE CALL FOR WEIGHT WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items ... morethat require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM 6
|
|
|
NORD 9042L IEC112 GEAR REDUCER, RATIO 66.71, RPM 26.00 (USED)
SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION(BELOW) PLEASE CHECK OUT OUR SALE ITEMS IN OUR STORE! NORD GEAR REDUCER 9042L IEC112 RATIO 66.71 MAX TORQUE 21240 IN LBS 26.00 RPM USED APPROXIMATE SHIPPING WEIGHT 300 LBS WITH SKID JP IF YOU HAVE ANY QUESTIONS PLEASE CALL US AT 731-635-3167 Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description ... morefor surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgment on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to misrepresent. We do honor our 7 day return policy. If you should get an item that does not work. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. ALL PAYMENTS ARE TO BE MADE WITHIN 5 DAYS. IF YOU PURCHASED AN ITEM THAT REQUIRES FREIGHT SHIPPING. SHIPPING ARRANGEMENTS ARE TO ALSO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CURTIS MACHINE 903823 3 215 1 IN 1 IN 1:1 GEAR REDUCER D265735
Brand: CURTIS MACHINE Condition: Refurbished Model: 903823 3 215 Input Diameter: 1 IN Output Diameter: 1 IN Ratio: 1:1 Weight: 18.80 lbs Dimensions: 10 X 9 X 4.50 SKU: D265735 Category: Power Transmission· Gear Reducers Additional Notes:
|
|
|
REGAL BELOIT 2225-F-2 ALLING-LANDER 1.40HP 25:1 56C WORM GEAR REDUCER D265250
Brand: REGAL BELOIT Condition: Refurbished Model: 2225-F-2 Type: Worm Gear Input Diameter: 5/8 IN Output Diameter: 1 IN HP: 1.40 HP Ratio: 25:1 Frame: 56C Weight: 25.20 lbs Dimensions: 7.50 X 9 X 8.50 SKU: D265250 Category: Power Transmission· Gear Reducers Additional Notes: ALLING-LANDER
|
|
|
CONE DRIVE MSHV30A556-Y7A TEXTRON 3792-409-A-262 5.06:1 GEAR REDUCER D265099
Brand: CONE DRIVE Condition: Used Model: MSHV30A556-Y7A Input Diameter: 1 IN Output Diameter: 1-1/2 IN Ratio: 5.06:1 Weight: 87.50 lbs Dimensions: 17 X 12 X 8 SKU: D265099 Category: Power Transmission· Gear Reducers Additional Notes: TEXTRON 3792-409-A-262
|
|
|
ITT 3212 034951 MAXIMUM 85PSI ACTUATOR PNEUMATIC MOTOR B263844
Brand: ITT Condition: Used Model: 3212 034951 Weight: 10 lbs Dimensions: 11 X 9 X 8 SKU: B263844 Category: Pneumatics· Pneumatic Motors Additional Notes: MAXIMUM 85PSI ACTUATOR
|
|
|
BOSTON FLANGED GEAR REDUCER 338A50-H1 -3HP-
This gear box(the larger one on bottom of the smaller one) was the bottom section of manual collimator position machine and was operated with hand wheel only. Sort of like a satellite dish positioner. The steel structure and hand wheel was removed and now only the gear box remains. This sale is for the larger unit only, the smaller one may still be available for purchase in the store. I don't think this machine was ever used and definitely never used with a motor drive making it used but never operated condition. Note the flange cast to the case.A special wood create will be built for transport to your location. This will need to be freight shipped because of the weight. 105lbs and you will be required to pay any additional shipping cost. Please inquire prior to purchasing. PLEASE READ BEFORE YOU PURCHASE OR BID) BUYER OR HIGH BIDDER ... moreCAN PURCHASE ITEMS USING PAYPAL AND PAYS ACTUAL SHIPPING COST OR AS NOTED BELOW.IF YOU HAVE NEGATIVE FEEDBACKS. PLEASE MOVE ON. HI,AK,PR AND INTERNATIONAL SHIPPING(IF APPLIES) MAY COST EXTRA.BAR CODE TRACKING OF PACKAGES HAS BEEN A GREAT ASSET TO US ALL BUT LOSSES STILL DO HAPPEN BEYOND MY CONTROL. PLEASE CONSIDER SHIPPING INSURANCE AS I WILL NOT BE RESPONSIBLE WHEN OR IF THIS SHOULD HAPPEN. JUST ASK ME TO INCLUDE IT TO YOUR INVOICE PRIOR TO PAYMENT. PLEASE CLICK-ENLARGE- TO SEE A BIG CLEAR PICTURE. AS ALWAYS I WILL LEAVE A POSITIVE FEEDBACK UPON RECEIVING ONE. DO NOT PURCHASE IF YOU HAVE NO INTENTION OF PAYING FOR THE ITEM. I DO INFORM EBAY OF THESE BUYERS SO PLEASE DON'T. CHECK OUT MY STORE AND FEED BACKS. Check out my!
|
|
|
BOSTON FLANGED GEAR REDUCER 332B20-H1 -4HP-
This gear box(the smaller one on top of the larger one) was the top section of manual collimator position machine and was operated with hand wheel only. Sort of like a satellite dish positioner. The steel structure and hand wheel was removed and now only the gear box remains. This sale is for the smaller unit only, the larger one may still be available for purchase in the store. I don't think this machine was ever used and definitely never used with a motor drive making it used but never operated condition. Note the flange cast to the case. A special wood create will be built for transport to your location. This will need to be freight shipped because of the weight. 77lbs and you will be required to pay any additional shipping cost. Please inquire prior to purchasing. PLEASE READ BEFORE YOU PURCHASE OR BID) BUYER OR HIGH BIDDER CAN PURCHASE ... moreITEMS USING PAYPAL AND PAYS ACTUAL SHIPPING COST OR AS NOTED BELOW.IF YOU HAVE NEGATIVE FEEDBACKS. PLEASE MOVE ON. HI,AK,PR AND INTERNATIONAL SHIPPING(IF APPLIES) MAY COST EXTRA.BAR CODE TRACKING OF PACKAGES HAS BEEN A GREAT ASSET TO US ALL BUT LOSSES STILL DO HAPPEN BEYOND MY CONTROL. PLEASE CONSIDER SHIPPING INSURANCE AS I WILL NOT BE RESPONSIBLE WHEN OR IF THIS SHOULD HAPPEN. JUST ASK ME TO INCLUDE IT TO YOUR INVOICE PRIOR TO PAYMENT. PLEASE CLICK-ENLARGE- TO SEE A BIG CLEAR PICTURE. AS ALWAYS I WILL LEAVE A POSITIVE FEEDBACK UPON RECEIVING ONE. DO NOT PURCHASE IF YOU HAVE NO INTENTION OF PAYING FOR THE ITEM. I DO INFORM EBAY OF THESE BUYERS SO PLEASE DON'T. CHECK OUT MY STORE AND FEED BACKS. Check out my!
|
|
|
Reliance S-2000 3-Ph 3/4-Hp Motor & Dodge Speed Reducer GearBox Tigear 10:1 Dual
Questions? Call us: 1-877-328-9236. Reliance S-2000 3-Ph 3/4-Hp Motor& Dodge Speed Reducer GearBox Tigear 10:1 Dual. Manufacturer: Dodge Model: MR94751LK J PY Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Dodge Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: When power was applied this motor/reducer combination ran very smoothly. It was not tested under a load. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Reliance S-2000 Motor, 1) Dodge 175 Tigear Speed Reducer GearBox, Specifications: Motor: Manufacturer: Reliance Electric, ID: P56H1337W-PY, Duty Master, AC Motor, S-2000, Fra: EC56C, Type: P, Phase: 3, 3/4 Hp, 1725 RPM, V: 208-230/ 460-480, A: 2.9-2.6/ ... more1.3-1.5, 60 Hz, SF: 1.15, Time Rating: Cont, Ins. Cl: F, Code: J, Reducer: Manufacturer: Dodge, Ident: MR94751LK J PY, Dual Shaft, Tigear, Size-Ratio: 56/175-10, Ratio: 10:1, SF: 1.00, Max. Input Hp: 1.70, Input RPM: 1750, Output Torque: 524, Shaft Diameters: 7/8" SKU: N40L003 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territorie
|
|
|
BROOK HANSEN SFN75B20M NEJM 065 2-1/8 IN 3-5/8 IN 20:1 GEAR REDUCER B264792
Brand: BROOK HANSEN Condition: Used Model: SFN75B20M Input Diameter: 2-1/8 IN Output Diameter: 3-5/8 IN Ratio: 20:1 Weight: 749 lbs Dimensions: 37 X 25 X 24 SKU: B264792 Category: Power Transmission· Gear Reducers Additional Notes: NEJM 065
|
|
|
133C1-LR10E 5/8 IN 5/8 IN 0.78HP 10:1 56C GEAR REDUCER D265667
Brand: NA Condition: Refurbished Model: 133C1-LR10E Input Diameter: 5/8 IN Output Diameter: 5/8 IN HP: 0.78 HP Ratio: 10:1 Frame: 56C Weight: 18.00 lbs Dimensions: 9 X 7 X 7 SKU: D265667 Category: Power Transmission· Gear Reducers Additional Notes: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-141c94ab7c5-0x109-
|
|
|
SM-CYCLO GEAR REDUCER - 3 HP 87:1 1800 RPM 20 OUTPUT HM3-216Y
SM-CYCLO GEAR REDUCER- 3 HP 87:1 1800 RPM 20 OUTPUT HM3-216Y. HP RATING: 3. RATIO: 87:1. INPUT RPM: 1750. OUTPUT SPEED: 20. APPROX SHIPPING WEIGHT: ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for any reason. We ... morereserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool. List your item
|
|
|
DODGE TIGEAR MR94763 N AB GEAR REDUCER MR94763NAB MR94763-N-AB
DODGE TIGEAR MR94763 N AB GEAR REDUCER MR94763NAB MR94763-N-AB This unit has not been tested. Flat Rate Domestic Shipping will be UPS Ground. FedEx Ground or US Priority Mail, at our discretion.
|
|
|
HUB CITY SPEED REDUCER GEAR BOX 022062176265 0220 6217 6265 MODEL 265
HUB CITY SPEED REDUCER GEAR BOX 022062176265 0220 6217 6265 MODEL 265 PICTURES ARE REPRESENTATIVE OF THE UNIT THAT YOU WILL RECEIVE. THIS UNIT HAS NOT BEEN TESTED. International Customers are responsible for all Customs fees. Import taxes, VAT, and other fees applied by their respective countries. Flat Rate Domestic Shipping will be UPS Ground. FedEx Ground or US Priority Mail, at our discretion.
|
|
|
Bayside PS115-015 15:1 Ratio In Line Gear Box Reduction Head MT115-015-027
Use in good condition. What you see in picture is what you will get. Bayside PS115-015 15:1 Ratio In Line Gear Box Reduction Head MT115-015-027.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-141c956cee2-0xff-
|
|
|
BROWNING 262Q140R60 0.79HP 60:1 WORM GEAR REDUCER D264970
Brand: Browning Condition: Used Model: 262Q140R60 Type: Worm Gear Input Diameter: 7/8 IN Output Diameter: 1-1/8 IN HP: 0.79 HP Ratio: 60:1 Weight: 41.40 lbs Dimensions: 8.75 X 9 X 8.25 SKU: D264970 Category: Power Transmission· Gear Reducers Additional Notes: MISSING C-FACE FLANGE
|
|
|
Thomson 42-114349-C775 Micron UltraTrue Helical True Planetary UT010-025-0
Thomson 42-114349-C775 Micron UltraTrue Helical True Planetary UT010-025-0. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: Thomson Micron UltraTrue Helical True Planetary Gearhead Model# UT010-025-0. Part# 42-114349-C775 Ratio: 25:1. I accept Paypal. Money Orders or Checks. I ship by UPS or USPS.
|
|
|
ZERO-MAX, DRIVE POWER BLOCK, VARIABLE SPEED TRANSMISSION,12lbsTORQUE,BELT drive
NO RESERVE THIS auction for 1-pc used: ZERO-MAX. DRIVE POWER BLOCK, VARIABLE SPEED TRANSMISSION.12 LBS TORQUE,BELT drive. nice little variable speed unit. With an input RPM of 1800, it has a 0 to 400 RPM output, used condition. Shipping weight 7-lbs. Postal money orders& company checks always welcome! You get What you see! Local pick-ups are always welcome(no charge) May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described!
|
|
|
REXNORD SKZH55C80I SPEED 4-1/8 IN 6 IN 80:1 GEAR REDUCER B266829
Brand: REXNORD Condition: Used Model: SKZH55C80I Input Diameter: 4-1/8 IN Output Diameter: 6 IN Ratio: 80:1 Weight: 232 lbs Dimensions: 26 X 11 X 15 SKU: B266829 Category: Power Transmission· Gear Reducers Additional Notes: SPEED
|
|
|
STOBER DRIVES TD27 10018K143-100 1243/177.7RPM 1.8:1 GEAR REDUCER B266311
Brand: STOBER DRIVES Condition: Used Model: TD27 10018K143-100 Ratio: 1.8:1 Weight: 45 lbs Dimensions: 14 X 10 X 11 SKU: B266311 Category: Power Transmission· Gear Reducers Additional Notes: 1243/177.7 INPUT-RPM 1750 OUTPUT-RPM 41IN/113LB-TORQUE 1243/177.7 INPUT-RPM 1750 OUTPUT-RPM 41IN/113LB-TORQUE
|
|
|
Hub City Gear Box model 150 1/1 ration
Hub City gear box- used. 0220-00802-150. Model 150. Ration 1/1. Style AB. Date code 0804.
|
|
|
REXNORD SFN35C63A 1-7/8 IN 1-1/8 IN 63:1 GEAR REDUCER B266791
Brand: REXNORD Condition: Used Model: SFN35C63A Input Diameter: 1-7/8 IN Output Diameter: 1-1/8 IN Ratio: 63:1 Weight: 90 lbs Dimensions: 19 X 11 X 11 SKU: B266791 Category: Power Transmission· Gear Reducers Additional Notes:
|
|
|
Winsmith 920 Speed Reducer female
Winsmith 920 Speed Reducer. Used once then put into storage. Model#920MDSN Part# 920MDSS51160B7
|
|
|
Boston Gear F621A-5-B5 Gear Speed Reducer 1750 RPM, 1.450HP, 260lb-in Torque Out
Boston Gear F621A-5-B5 Gear Speed Reducer 1750 RPM. 1.450HP, 260lb-in Torque Out From our inventory. We are selling a Boston Gear F621A-5-B5 Gear Speed Reducer 1750 RPM. 1.450HP, 260lb-in Torque Out. Specifications: Model# Boston Gear F621A-5-B5 Gear Speed Reducer 1750 RPM. 1.450HP, 260lb-in Torque Out More Information: 1750RPM 1.45 HP 260lb-in Shaft Size: 1-1/2" x 3/4" ST39-4 26 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping ... moreWeight: 26 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX:
|
|
|
DORR OLIVER N289 2-1/2IN OD 39IN-LENGTH WORM GEAR SHAFT REPLACEMENT PART B267926
Brand: DORR OLIVER Condition: Used Model: N289 Type: Shaft Weight: 157 lbs Dimensions: 42 X 8 X 8 SKU: B267926 Category: Power Transmission· Replacement Parts Additional Notes: 2-1/2IN OD 39IN-LENGTH.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141dd7ae3bb-0xf9-
|
|
|
SEW SANTASALO P3 0056IN 100-010/VT 1200RPM MK2-21000 FS-2 GEAR REDUCER B267906
Brand: SEW SANTASALO Condition: Used Model: P3 0056IN 100-010/VT Output Diameter: 6 IN Weight: 800 lbs Dimensions: 39 X 22 X 25 SKU: B267906 Category: Power Transmission· Gear Reducers Additional Notes: 1200RPM MK2-21000 FS-2 1200RPM MK2-21000 FS-2
|
|
|
ETR 3 Phase Asynchronous Motor KRA1A2 CS-K 71 A4,with Gear Reducer
ETR 3 Phase Asynchronous Motor KRA1A2 CS-K 71 A4.With Gear Reducer Stock#5000
|
|
|
VINTAGE BODINE ELECTRIC CO. CHICAGO GEAR SPEED REDUCER 10:1 RATIO WORKS
UP FOR BIDS IS A VINTAGE BODINE ELECTRIC CHICAGO SPEED REDUCER 10:1 RATIO. PICKED THIS UP AT AN ESTATE SALE VERY COOL ITEM THAT WORKS. PLEASE VIEW ALL PHOTOS AND ASK ANY QUESTIONS YOU MIGHT HAVE BEFORE BIDDING. THANKS FOR STOPPING BY AND HAVE A VERY BLESSED DAY! TYPE: NS1-53R SERIAL# 2065018 VOLTS: 115 AC AMPS: 2.0 R.P.M. 1725 PH: 1 H.P. 1 1/2 TORQUE: 21 IN. LBS RATIO: 10:1
|
|
|
Browning Series 3000 Speed Reducer 1750RPM 6.3 Ratio
758 Four Rod Rd. Berlin. CT 06037 Browning Series 3000 Speed Reducer 1750RPM 6.3 Ratio, For complete specifications. See. Offered with a 48-hour test-and-inspection period from the date of delivery. Please inspect our high-resolution photographs. Please contact us if you are local and would like to pick the item up. Our address is below. Auction it T O DAY of Connecticut 758 Four Rod Rd. Berlin. CT 06037 Phone: 860-828-4400 Payment: All funds must clear before the item is shipped or picked up. We ask that you forward your payment ASAP to avoid any delay in the transaction. Buyers are allotted 4 days from the end of the auction to remit payment. If the buyer has not paid within this time. We reserve the right to re-list. Due to the fact that we are trading assistants, all auctions must be sold"AS IS. Sales tax of 6.35% will be added for ... moreany pick up sales and for items sold anywhere in Connecticut. Shipping: Buyer agrees to pay the amount listed(US Dollars) to cover shipping and handling. We CANNOT ship to P.O. boxes. We generally use UPS for all US domestic shipments and USPS for all international shipments. Auction it TODAY reserves the right to ship with other shipping carriers. We will not mark international shipments as gifts and will declare the proper value. We are not responsible for duties and import taxes that you may be charged upon receiving your item. All international sales are final. We require a valid contact phone number for International shipments. We ship 5 days a week(Mon-Fri) Items will ship within(2) to(3) business days after payment has been received. Once the item leaves our facility. We are no longer responsible for the item. All items are from our warehouse in F.O.B. Berlin, CT and the seller accepts no responsibility for the item after it leaves our dock. Any freight claim is between the carrier and the buyer. Please inspect all packages carefully. If you sign for an item from the freight company in good condition, they will deny any damage claims. Returns: Please carefully in
|
|
|
NEW MOTORCRAFT WM-586 YS4Z-17508-AB WIPER MOTOR !!
NEW MOTORCRAFT WM-586 YS4Z-17508-AB WIPER MOTOR! This is new. Additional pictures are located at the bottom of the ad. We take care to pack your items professionally. Therefore items can take up to 5 days to ship after payment has cleared when we are backed up. Typically it is only a couple of days after but it does very through the seasons. If there is a critical need for immediate shipping(24 hours from time of payment, Monday through Friday) please let us know immediately after payment has been made. We try our hardest to give 5-Star Service by giving Clear. Accurate and Honest descriptions to the best of our abilities. We also clearly state our return policies and shipping terms upfront so you know what to expect.If you are pleased with this transaction, please respond with all 5 Stars! If you are not pleased for any reason, Please contact ... moreus using the Contact Seller link on the auction page, and we'll try and make it a Five Star Sale! No C.O.Ds please.Payment due within 7 days of auction end.
|
|
|
Grove Gear TM0224-2, 20:1 Speed Reducer Flexaline, 1 1/8" Shaft
Grove Gear TM0224-2. 20:1 Speed Reducer Flexaline, 1 1/8" Shaft. Two of the moutning feet on the removable mounting plate are broken. Stock#41140
|
|
|
SHEPARD-NILES? 301242 11-1/2IN HOIST CRANE-LOAD BLOCK 3-1/2IN SHEAVE B269984
Brand: SHEPARD NILES Condition: Used Model: 301242 Number of Grooves: 1 Groove Bore Size: 3-1/2 IN Weight: 23 lbs Dimensions: 13 X 13 X 4 SKU: B269984 Category: Power Transmission· Sheaves Additional Notes: SHEPARD-NILES? 11-1/2IN 0D HOIST&CRANE-LOAD BLOCK
|
|
|
RELIANCE REEVES X-V MOTO DRIVE 288-1 RATIO 208/ 230/460 VAC 1/2 HP
1/2 HP 208/230/460 VOLT 3 PHASE 288-1 RATIO REEVES XV MOTO DRIVE BENCH TESTED IN OUR FACILITY
|
|
|
DODGE TXT925 GEAR REDUCER
DODGE TXT9 GEAR REDUCER TAPER SHAFT RATIO 25-1 GEARING GOOD CONDITION NO SEAL GROOVES BEARINGS INSPECTED AND SHIMED TO MANUFACTURE SPECS NEW SEALS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-141e7d0e289-0xfd-
|
|
|
SEW EURODRIVE MOTOR DRIVE COMBINATION MOTOR 1/2 HP 230/460 V
SEE PICTURES FOR ALL TAG DETAILS- CAME FROM CLOSED PLANT STOREROOM- LOC DY A2-4 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SEW EURODRIVE GEAR REDUCER MODEL # R107A-KS
SEE PICTURES FOR DETAILS- CAME FROM STOREROOM SHELF AT CLOSED PLANT- LOC DY A2-3 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SEW EURODRIVE MOTOR AND DRIVE COMBINATION 7-1/2 HP 230/460V MOTOR DRIVE 141.12/1
DRIVE# RF137DV132S4- SEE PICTURES FOR TAG DETAILS- CAME FROM STOREROOM CLOSED FOOD PLANT LOC DY A2-3 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-141e9962d19-0xfd-
|
|
|
NEW HORTON 912200 5H35PSP-1*1.125 AIR CHAMP 2450LB-FT CLUTCH 1-1/8IN D268335
Brand: HORTON Condition: Used Model: 912200 5H35PSP-1*1.125 BORE. PILOT Type: Clutch Torque: 2450 LB-FT Shaft Size: 1-1/8 IN Weight: 11.00 lbs Dimensions: 5 X 5 X 4 SKU: D268335 Category: Power Transmission· Clutches Additional Notes: PNEUMATIC AIR CHAMP PILOT MOUNT
|
|
|
Speed reducer w/rheostat Right angle 50rpm 100:1 1/25hp Bodine
Speed reducer w/rheostat Right angle 50rpm 100:1 1/25hp Bodine This is a speed reducer made by Bodine. Model NSE-11R. This includes an Ohmite rheostat, spec 39894. This is in good used condition with some minor cosmetic damage. Motor: 115 VAC/VDC 5000 RPM 0.85 amps 1/25 hp Intermittent duty Output: Right angle 50 rpms 100:1 ratio Shaft: Diameter: 0.312(5/16) inch Length: 1 1/8 inches Center of shaft to base height: 1 3/8 inches Alternate P/N: 2080XZ288 NSN: 3010-00-548-1229, Specifications: MFG: Bodine. Ohmite, Model: NSE-11R, Serial: Volts: 115 VAC/VDC, Amps: Phase: 1, Drive: Controls: Manuals: Air: Weight: 7, Length: 0, Width: 0, Height: 0, Condition: Used, Inventory# 4549, For more information call 610-286-1655. Please call or email for shipping rates. When communicating with us please use your own email address or call 610-286-1655. We ... morewant to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items as-is. This does not mean that you are buying a machine with deficiencies. Known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and ope
|
|
|
Speed reducer Gearmotor Right angle 28rpm 60:1 1/15hp 44inlb Bodine
Speed reducer Gearmotor Right angle 28rpm 60:1 1/15hp 44inlb Bodine This is a speed reducing gearmotor made by Bodine. Model NC1-34RHL. This is in good used condition. The paint has some cosmetic damage. Motor: 115 v 3 wire hookup Continuous duty 1/15 hp Use 5 mfd capacitor Output: 60:1 ratio 28 RPM(1650 motor rpm) Right angle 44 in lb Shaft dimensions: Diameter: 5/8 in Length: 1 3/8 in Height to shaft center from mount: 3 3/4 in Mounting: 1 3/8(35mm) x 2 5/32(55mm) inches P/N sometimes miswritten as NCI-34RHL. NCl-34RHL, Specifications: MFG: Bodine, Model: NC1-34RHL, Serial: Volts: 115, Amps: Phase: 1, Drive: Controls: Manuals: Air: Weight: 16, Length: 0, Width: 0, Height: 0, Condition: Used, Inventory# 4548, For more information call 610-286-1655. Please call or email for shipping rates. When communicating with us please use your own email ... moreaddress or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items as-is. This does not mean that you are buying a machine with deficiencies. Known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be
|
|
|
HUB CITY 1:1 ANGLE GEAR REDUCER 3/4" D X 1" L SHAFT MODEL AD3 0220-00402
HUB CITY 1:1 ANGLE GEAR REDUCER 3/4" D X 1" L SHAFT MODEL AD3 ASSEMBLY: 0220-00402 MAY BE NEW BUT CAN'T BE 100% SURE SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS LOCATED IN SV-J D-1 VINCE
|
|
|
Sandex 11FU-31469R-L1A1/X Rotary Indexing Oscillating Drive Parts Handler
Sandex 11FU-31469R-L1A1/X Rotary Indexing Oscillating Drive Parts Handler Description Sandex 11FU-31469R-L1A1/X Rotary Indexing Oscillating Drive Parts Handler This handler uses a large diameter roller gear cam with a groove cam on the face of the cam for additional flexibility with schemes and wider oscillating angles. Specs: http:www.sankyo-seisakusho.co.jp/english/products/sandex20.html This item requires freight shipping. Please contact us for a freight shipping quote prior to purchase Manufacturer Sandex Manufacturer Part Number 11FU-31469R-L1A1/X Item/Ship Weight 135 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please ... moreemail or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping* $ 35.00 SHIPPING IS CRATING FEE ONLY* This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 47172 Feel free to call with any questions prior to placing a bid! IMPORTANT-PLEASE READ BELOW BEFORE BIDDING. Welcome to our eBay listing! To make your purchase as simple and easy as possible. Please refer to the detailed policies listed below. Our e-mails will come from auctions at recycledgoods.com. Your spam filter mi
|
|
|
Bayside Right Angle Gearhead RB180-003-001 #46797
Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Bayside Right Angle Gearhead Model: RB180-003-001 Ratio: 20:1( not sure tag is not legible) lm. Contact Us@ info@idealmachinery.com or feel free to call 248-627-3135 WARRANTY All purchased items include a 30 day warranty(from date of purchase) unless otherwise stated. This warranty does not include items sold"as parts" or"as is" It also does not include manuals or new factory sealed items. Item must be returned in the same condition as purchased. Additionally the security seals must not be tampered with or removed; DOING SO WILL VOID THIS WARRANTY! In the unlikely event that your purchase does not turn out as expected. Please contact us for an ... moreRMA number as well as return instructions. Please email me with any questions and thanks for looking! Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites Payment in full must be made prior to loading. We accept PayPal. Credit cards, bank wire transfers and business checks; NO PERSONAL CHECKS, Please! All local. County, state and federal taxes are the sole responsibility of the buyer and are not included in the purchase price. Items can be picked up at 10230 N. Holly Rd. Holly. Michigan 48442. Please be sure and call our office at 248-627-3135 to schedule a time if you are picking up your item. We will need a 24 hour notice if your items requires a pallet. We ship Monday through Friday. We are in the Eastern Standard Time zone. If a request for overnight shipping is made before 3:00 p.m. We can get it to you the next day. We try our best to get all packages out within 48 hours but most items will ship the next day. Please check our feedback; everyone raves about our quick shipping. We take our feedback very seriously. We offer FREE Same Day Courier Service within 100 miles of our location for ALL items with a BUY IT NOW price of $900 or more and we
|
|
|
Bayside Right Angle Gearhead RS142-020 #46796
Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Bayside Right Angle Gearhead Model: RS142-020 Ratio: 20:1 lm. Contact Us@ info@idealmachinery.com or feel free to call 248-627-3135 WARRANTY All purchased items include a 30 day warranty(from date of purchase) unless otherwise stated. This warranty does not include items sold"as parts" or"as is" It also does not include manuals or new factory sealed items. Item must be returned in the same condition as purchased. Additionally the security seals must not be tampered with or removed; DOING SO WILL VOID THIS WARRANTY! In the unlikely event that your purchase does not turn out as expected. Please contact us for an RMA number as well as return instructions. ... morePlease email me with any questions and thanks for looking! Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites Payment in full must be made prior to loading. We accept PayPal. Credit cards, bank wire transfers and business checks; NO PERSONAL CHECKS, Please! All local. County, state and federal taxes are the sole responsibility of the buyer and are not included in the purchase price. Items can be picked up at 10230 N. Holly Rd. Holly. Michigan 48442. Please be sure and call our office at 248-627-3135 to schedule a time if you are picking up your item. We will need a 24 hour notice if your items requires a pallet. We ship Monday through Friday. We are in the Eastern Standard Time zone. If a request for overnight shipping is made before 3:00 p.m. We can get it to you the next day. We try our best to get all packages out within 48 hours but most items will ship the next day. Please check our feedback; everyone raves about our quick shipping. We take our feedback very seriously. We offer FREE Same Day Courier Service within 100 miles of our location for ALL items with a BUY IT NOW price of $900 or more and weighing less than 100 lbs. This off
|
|
|
ALPHA SP140-MF1-7 GEAR REDUCER
ALPHA GEAR REDUCER Model: SP140-MF1-7 Serial# 178504 Condition: Looks to be in used condition. Shows some shelf wear, we are unable to test, selling AS-IS All reasonable offers considered! Buyer pays shipping We are business liquidators. We are not the original purchasers. Owners, or operators of this equipment. We sell out items AS-IS, no warranties, guarantees expressed or implied(this is exactly how we buy our items) These items are used, do not assume they will be in brand new mint condition, they will show normal use and wear which means minor scratches, scuffs, or blemishes and maybe dusty from storage, etc. Please take this into consideration when placing a bid or best offer. Please ask ALL questions BEFORE bidding or submitting a best offer We try our best to describe our items as accurately as possible with pictures and description
|
|
|
ALPHA SP140-MF1-7-111-000 GEAR REDUCER Ratio 7
ALPHA GEAR REDUCER Ratio 7 Model: SP140-MF1-7-111-000 Serial# 198829 Condition: Looks to be in used condition. Shows some shelf wear, we are unable to test, selling AS-IS All reasonable offers considered! Buyer pays shipping We are business liquidators. We are not the original purchasers. Owners, or operators of this equipment. We sell out items AS-IS, no warranties, guarantees expressed or implied(this is exactly how we buy our items) These items are used, do not assume they will be in brand new mint condition, they will show normal use and wear which means minor scratches, scuffs, or blemishes and maybe dusty from storage, etc. Please take this into consideration when placing a bid or best offer. Please ask ALL questions BEFORE bidding or submitting a best offer We try our best to describe our items as accurately as possible with pictures ... moreand description
|
|
|
Gear Reducer W/ .33 hp, Baldor Electric motor,w/Timing Belts & Pulleys, conveyor
NO RESERVE THIS auction for 1-pc used: 10:1 Right Angle Gear Reducer W/ 33 hp. Baldor Electric motor, w/Timing Belts& Pulleys, conveyor. 33 hp, 1725rpm, 115/230vac(wired with switch@ 115v) come with 2-timing belt pulleys and timing belt, along with a belt guard, works fine. used condition. Shipping weight 38-lbs. Postal money orders& company checks always welcome! You get What you see! Local pick-ups are always welcome(no charge) May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title ... morefor my reference. Returns are welcome if not as described!
|
|
|
ALPHA SP 100-MF1-5-141 GEAR REDUCER Ratio 5:1 #4
ALPHA GEAR REDUCER Ratio 5:1 Model: SP 100-MF1-5-141 Serial# 1161297 Condition: Manufacture refurbished. May have some superficial marks and some surface rust due to storage All reasonable offers considered! Buyer pays shipping We are business liquidators. We are not the original purchasers. Owners, or operators of this equipment. We sell out items AS-IS, no warranties, guarantees expressed or implied(this is exactly how we buy our items) These items are used, do not assume they will be in brand new mint condition, they will show normal use and wear which means minor scratches, scuffs, or blemishes and maybe dusty from storage, etc. Please take this into consideration when placing a bid or best offer. Please ask ALL questions BEFORE bidding or submitting a best offer We try our best to describe our items as accurately as possible with pictures ... moreand description Posted with eBay Mobile Posted with
|
|
|
MARTIN D50B22H 22 TOOTH CHAIN DOUBLE ROW 1IN SPROKET**NNB**
MARTIN D50B22H 22 TOOTH CHAIN DOUBLE ROW 1 IN SPROCKET NEW NO BOX PHOTO IS ACTUAL ITEM D11F2L JTW WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international or freight shipments. Feel free to contact us if you are purchasing multiple items to see if your purchase qualifies for shipping ... morediscounts. PAYMENT Payment can be made with Paypal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any remanufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 17:24:51 PDT. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141eba5e1bb-0x109-
|
|
|
Dodge Tigear Speed Reducer Gear Box MR94766L1 1/2 HP INPUT
~~ Please read the description below the photographs ~~ This listing is for a used Dodge Tigear speed reducer gear box. Model MR94766L1. Please refer to the pictures for specs. This reducer has a minor seal leak. Reducer was in good working condition when removed from service but is being sold as-is. New York State resident buyers: As indicated in the'Shipping and Payments' section. I collect sales tax on items sold to NY residents. Unless you can provide me with a valid NYS sales tax certificate, please be prepared to pay 8% sales tax on your purchase. Welcome to Plattsburgh's Pbay! Located in Plattsburgh. NY, Pbay is a professional eBay selling service. All items listed are on consignment. See my other auctions for a wide variety of items. POLICIES I provide accurate listings. Fair pricing, and fast and safe shipping of new ... moreand used items that are consigned to me by local clients. Payments Payment in full is required within 3 days of auction end. I reserve the right to relist items that have not been paid for in a timely fashion. Shipping Guidelines HANDLING CHARGES: Some auction and buy-it-now items are subject to a nominal handling charge of.50-$2.00. I purchase NEW boxes for secure shipping. So the small handling charge is designed to help offset the cost of packaging supplies like boxes, bubble wrap and tape. NOTE: Any handling charge is included in the total shipping cost that you see when you view the listing. Also. I do not charge handling(beyond the first item) on combined purchases when shipped together. COMBINED SHIPPING: Yes. I am always happy to combine shipping for multiple items. Please email me for a quote. SIGNATURE CONFIRMATION: At my discretion. I will include signature confirmation on orders valued over $50. Signature confirmation ensures that YOUR package reaches YOU, thus protecting your investment. It also protects the consignor's and seller's earnings from the sale, and minimizes the potential for fraudulent claims. Han
|
|
|
Engine Compression Gauge W/ 5 Adaptors With steel case
Engine Compression Gauge with 5 Adapters in steel case Lens has 1 small crack.
|
|
|
Browning Pulley # AL 64 6" V Belt 3/4" Hole 3/16 key way 7/16" width
Browning 6" V-Belt Pulley# AL 64 7/16" Width 3/4" Hole With 3/16" Key Way
|
|
|
Thomson NTR23-020-32-513783-6799 NemaTRUE 90 Right Angle Gearhead, 20:1
Thomson NTR23-020-32-513783-6799 NemaTRUE 90 Right Angle Gearhead. 20:1 From our inventory. We are selling a Thomson NTR23-020-32-513783-6799 NemaTRUE 90 Right Angle Gearhead. 20:1. Specifications: Model# Thomson NTR23-020-32-513783-6799 NemaTRUE 90 Right Angle Gearhead. 20:1 More Information: Ratio: 20:1 Input: 1/4" Output: 375" ST58-5-H 6 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 6 lbs. To calculate shipping. ... morePayment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasona
|
|
|
SUMITOMO TC-FX SM-CYCLO 3 PHASE INDUCTION MOTOR 1HP / 1 HP
SUMITOMO TC-FX SM-CYCLO 3 PHASE INDUCTION MOTOR 1HP/ 1 HP REMOVED FROM FUNTIONING CELL SEE PICTURES FOR DETAILS STOCK ID# MI-79500/ FLOOR BEFORE YOU MAKE A PURCHASE. PLEASE READ ALL TERMS: Items that are listed as USED have not been tested. Condition is unknown; item is being sold“AS IS” unless otherwise specified in the items description. Any conditional notes will be listed in the additional information. This item is located in our warehouse in Troy. Michigan. Our warehouse hours are open by appointment only. In order to receive the quickest response, please message us directly through our eBay listing. Please be sure to include your name and contact information in your message. Turnaround Time. Standard order processing is 2 days regardless of shipping method chosen. Rush and off-hours service is available for an additional fee; please ... moreemail for further information. Storage Policy. Unless prior arrangements have been approved in writing. All items are required to be removed or shipped within 10 days of purchase. Items left beyond the 10 days time period will be subject to storage fees beginning on the 11th day after purchase. The storage fee is $20.00 per day, per item. Items left beyond 30 days will be considered abandoned and the customer forfeits the rights to the item(s) There will be no exceptions. Shipping. At Midwest Industrial Metals Inc.s discretion. Items that are deemed bulky and/or heavier than 75 lbs, we will NOT ship UPS/USPS. We require freight shipping on certain items to reduce the chance of damages. For items marked freight shipping. Please contact us prior to paying for the item to receive a freight price and provide us with the following information: shipping zip code, if the address is a residential or commercial address, and if a forklift/loading dock is available on site. Once we have this information, we will send a complete invoice with the total charges. If desired, buyers can arrange their own freight shipping. If this action is preferred, please let us know upon payment so w
|
|
|
SM-Cyclo CNHX-4085Y-59 Reducer +Dayton 6K233D +Leeson M4P17DC7D Motor Assy #2
Search our eBay Store! SM-Cyclo CNHX-4085Y-59 Reducer +Dayton 6K233D +Leeson M4P17DC7D Motor Assy#2 SKU: JV-MAT-A-DAYTONMAGDB Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge SM-Cyclo CNHX-4085Y-59 Reducer +Dayton 6K233D +Leeson M4P17DC7D Motor Assy#2 Assembly Includes: 1x SM-Cyclo CNHX-4085Y-59 Gear Reducer 1x Dayton 6K233D Magnetic Disc Brake 1x Leeson M4P17DC7D 1/2HP 1625RPM Motor Physical Condition: Good. Minor scuffs/scratches and signs of use. The assembly is attached to a metal base. One of the screws holding a panel to the base has broken off and is stuck inside. Please see photos. Functionality/Degree ... moreof Testing: We do not have the necessary resources to properly test this unit. Power cable is not included. Dimensions(L" x W" x H" 25*10.5*14 THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase
|
|
|
KCi Automation OS524080 024 OS536059 003 Custom Right Angle Reducer Gearbox
Search our eBay Store! KCi Automation OS524080 024 OS536059 003 Custom Right Angle Reducer Gearbox SKU: JV-JIM-B-OS524080 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge KCi Automation OS524080 024 OS536059 003 Custom Right Angle Reducer Gearbox P/N: OS524080 024 Physical Condition: Some scuffs and scratches. Gears turn. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Dimensions(L" x W" x H" 4 1/8* 2 1/2* 4 15/16 THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale ... moreof this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please contact us before leaving feedback or opening a
|
|
|
Sew eurodrive plc controller
Eurodrive Plc controller. Item is used but in very good shape.
|
|
|
Hub City 0220-03519-066 Model 66 1/1 Ratio Style AB Gear Reducer - Excellent !
Hub City 0220-03519-066 Model 66 1/1 Ratio Style AB Gear Reducer- Excellent! You are bidding on a Hub City 0220-03519-066 Model 66 1/1 Ratio Style AB Gear Reducer- just removed fully functional. Bin 2B We are happy to accept Paypal. And we are authorized to take Visa and Mastercard over the phone as well. Our shipping rates are based upon weight and size. And calculated directly by the Ebay shipping calculator. There is no upcharge for materials and time, we charge actual shipping charges only. We promptly ship UPS ground- fully insured in the continental United States. On occasion. If delivery times are shorter and it is practical, we will use USPS Priority Mail. We will be more than happy to quote you for UPS. FedEx or US Postal service for anywhere around the globe- we have successfully shipped to just about every country on every continent. ... moreIf you need it sooner, we recommend UPS overnight or 2nd day service. As is our policy, we will do whatever it takes! WE STRIVE FOR ALL FIVES! After your payment is received. We promptly issue you a positive feedback and pack and ship your purchase. If for any reason. You feel that you cannot extend us the perfect feedback score, please let us know how to remedy the situation. You can bid with confidence based upon our feedback, and our simple policy to make our customers happy! If you are dissatisfied for any reason, we will be happy to refund your money when you send the product back. We are an industrial supply company with"brick and mortar" locations in Green Bay. WI and Waupaca, WI. We specialize in high-end industrial equipment both new surplus and used. All of our auction items are also on sale locally and as such, are subject to prior sale. Our staff is equipped for everyday adventures such as flying, snowmobiling, diving, golfing, fishing, etcetera, On occasion, you will find these types of items as well. Please see our online industrial supply store on Ebay. Please email us for international shipping rates and with any further questions.
|
|
|
Lonex Ultra High Torque Motor
Barely been used. Less than 1000 rounds through it. It's a Lonex ultra high torque. It can pull any aeg spring you got. NOT used for high ROF, more of a dmr type. LONG TYPE. For M4 Posted with
|
|
|
FOR CHARITY: 1972 MORSE Stock Power Transmission Products Manual SP-72 REFERENCE
FOR CHARITY: 1972 MORSE Stock Power Transmission Products Manual SP-72. PLEASE BID GENEROUSLY AND HELP US HELP OTHERS. OUR FUNDRAISING EFFORTS WILL SUPPORT SEVEN FIRES FOUNDATION PROGRAMS THROUGHOUT THE YEAR. WHY JUST BUY SOMETHING ON EBAY WHEN YOU CAN BUY SOMETHING AND HELP OTHERS AT THE SAME TIME! IN THIS AUCTION YOU WILL RECEIVE: What a find! A genuine MORSE manual on"every industrial drive component under the sun" From Basic Drives. Bearings, couplings, clutches, conveyor, chain tools, gears and more. This is a great vintage item for anyone that needs to look up a part, reference a part number or get the specs on a specific part. This is a very large book with thousands of items listed. It is in great shape with tight binding. Clean pages and only minor shelf wear on the cover. Published in 1972. A great book to own and help ... morea good cause in the process! Thank you for bidding generously in support of our Charity Fundraiser! For more great items! We prefer payment via Paypal. We pride ourselves on our prompt shipping. Normally within 1 business day if auction ends before 1pm, else we ship within 2 days. We add the cost of insurance to our handling charge for breakable and costly items. Do we combine shipping- you bet we do. Just email at the end of the auction if you have multiple wins and wait for an invoice before you pay. We prefer not to ship internationally. But can. International buyers will pay all shipping at the US Postal priority mail rates plus a $5 handling fee. International shipping can be expensive so please bid accordingly and email for a shipping quote PRIOR to bidding. We appreciate payment as soon as possible. But within four days of the end of the auction unless contacted for special arrangements. Our refund policy is to issue a refund of the auction amount upon return of the item. Sorry. We do not refund shipping charges. We have a 100% feedback rating and take pride in our sales. We do this soley as a fundraiser for our nonprofit programs at Seven Fires Foundation. Our goal is to
|
|
|
40:1 Right Angle Gear Reduction Drive For 56C Motor W/ Sub Base
SOTTOF SALES Older USA Made drive from an optical comparator table lift in a Gov. Lab. Did not see a lot of use. 5/8" keyed input& output, mounts to a B56C motor, the heavy duty sub base is removable. D3630.22 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are ... moreabandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
Reliance Electric Dodge Tigear MR94653 D RX Reducer
Reliance Electric Dodge Tigear MR94653DRX Size- Ratio: 80/350-20 Service Factor: 1.00 Max Input HP: 3.15 Output Torque lb/in: 1884 Input RPM: 1750 Lube: E-3661 Specify Motor Frame Size/Face Construction: MR94653L1 Made in the USA Reliance Electric Industrial Co. Greenville. SC 29602 Condition: used working 14 Day Money Back Guarantee
|
|
|
Reliance Electric Dodge Tigear M655542001ZX Gearbox Gear Reducer
Reliance Electric Dodge Tigear M655542001ZX Ident: M655542001ZX CASE: 07916763HB Size- Ratio: 210 C350 B010 Service Factor: 1.00 Max Input HP: 11.26 Output Torque in/lbs: 4179 Input RPM: 1750 Made in the USA Reliance Electric Industrial Co. Greenville. SC 29602 Condition: used working 14 Day Money Back Guarantee
|
|
|
Nexen Horton 913022 5H40PSP-E*1.250 Bore Pilot Clutch OPEN BOX
Nexen/Horton Clutch Bore Pilot Model: 913022 Part Number: 5H40PSP-E*1.250 Bore Pilot Condition: Appears to be in good overall condition. We are not sure if it was used or is new open box as we are not the original owners or purchasers. Comes to you exactly as shown. Retail: $999.99 2 available at start of auction Normal 0 MicrosoftInternetExplorer4 We are business liquidators. We are not the original purchasers. Owners, or operators of this equipment. If applicable, we try our best to test items out if we can and it will be noted in the condition section of the description. These items are used, do not assume they will be in brand new mint condition, they will show normal use and wear which means minor scratches, blemishes, maybe dusty from storage, etc. Please ask ALL questions BEFORE bidding or submitting a best offer We try our best to ... moredescribe our items as accurately as possible ALL REASONABLE OFFERS CONSIDERED! Buyer pays shipping Local pick up available with cash payment ONLY
|
|
|
Cone Drive Gears MVO-77350-CUL Gear Box w/ Turning Gear Motor
DESCRIPTION Cone Drive Gears MVO-77350-CUL Gear Box w/ Turning Gear Motor Manufacturer: Cone Drive Gears Model: MVO-77350-CUL Year: Condition: Used Specifications: Model Number MVO-77350-CUL Ratio 500-1 RPM 1750 CL 1 HP 5.14 Westinghouse DC Motor HP 5 RPM 1750 Volts 125 Amps 35.9 Spare Part For Westinghouse 251AA Gas Turbine For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships ... moreworldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnor@essindustrial.com. Mac DB: 4980-1414-BD
|
|
|
Westinghouse 251AA Turbine Accessory Gear Drive 4S-24M
DESCRIPTION Westinghouse Accessory Gear Drive 4S-24M Manufacturer: Westinghouse Model: 4S-24M Year: 1970 Condition: Used Specifications: Ident. Number PH-45900-1 Cat Number 4S-24M Serv. HP 600 Fac INTERM Ratio 1.07 Input RPM 2804 Spare Part for Westinghouse 251AA Gas Turbine For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including ... moreUSPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnor@essindustrial.com. Mac DB: 4979-1414-BD
|
|
|
GAM GEAR Servo Bosch REXROTH CKK 15 110 Adapter NEMA 32 Coupler Linear Actuator
1) LSK- Linear Slide Adapter Kit Allows you to easily attached your Servo or Stepper motor(NEMA 32) to a Rexroth Linear Actuator CKK 15-110(and possibly other models) Can be used with any NEMA 32 Servo or Stepper. Our no-hassle solution for mounting linear slides to motors and gearboxes is the GAMLSK(Linear Slide Kit. A coupling is included– bellows or elastomer. The LSK is readily available and comes complete with mounting hardware. You just need to tighten the bolts. Action is for(1) ONE adapter ONLY* Rexroth Linear slide and flex coupler shown for illustrative purposes only and are NOT included*
|
|
|
6X3B-SD 6IN SD STYLE BUSHING PULLEY V-BELT 3GROOVE 1-5/8IN SHEAVE B273256
Brand: NA Condition: Used Model: 6X3B-SD Type: V-Belt Number of Grooves: 3 Groove Bore Size: 1-5/8 IN Weight: 10 lbs Dimensions: 6 X 6 X 4 SKU: B273256 Category: Power Transmission· Sheaves Additional Notes: SHELF WEAR 6IN SD STYLE BUSHING PULLEY
|
|
|
SKK GEAR REDUCER - 15 HP 7.609:1 1800 RPM 230 OUTPUT N5B0040G003
SKK GEAR REDUCER- 15 HP 7.609:1 1800 RPM 230 OUTPUT N5B0040G003. HP RATING: 15. RATIO: 7.609:1. INPUT RPM: 1760. OUTPUT SPEED: 230. APPROX SHIPPING WEIGHT: ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for any reason. ... moreWe reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool. List y
|
|
|
CONDRIVE GEAR REDUCER - 9.18 HP 20:1 1800 RPM 87.5 OUTPUT HU-7520C-330
CONDRIVE GEAR REDUCER- 9.18 HP 20:1 1800 RPM 87.5 OUTPUT HU-7520C-330. HP RATING: 9.18. RATIO: 20:1. INPUT RPM: 1750. OUTPUT SPEED: 87.5. APPROX SHIPPING WEIGHT: ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for ... moreany reason. We reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool.
|
|
|
SEW-EURODRIVE - 35.08:1 TYPE: R83 SERIAL # 860011057.1.01.86.003
SEW-EURODRIVE- 35.08:1 TYPE: R83 SERIAL# 860011057.1.01.86.003. HP RATING: N/A. RATIO: 35.08:1. RPM: N/A. OUTPUT: N/A. APPROX SHIPPING WEIGHT: ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for any reason. We reserve ... morethe right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool. List your items fas
|
|
|
V-belt Clutch Assembly (2674)
V-belt Clutch Assembly Flat rate shipping in the continental US No international shipping please. We can combine shipping on multiple items. Please see my other auctions
|
|
|
REX GEAR REDUCER - 55.66 11.02:1 1800 RPM 72 OUTPUT PLANETGEAR VENUS W/ SPROCKET
REX GEAR REDUCER- 55.66 HP 11.02:1 1800 RPM 72 OUTPUT PLANETGEAR VENUS W/ SPROCKET. HP RATING: 55.66. RATIO: 11.02:1. RPM: 1750. OUTPUT: 72 APPROX SHIPPING WEIGHT: 800 LBS. ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to ... moreclose for any reason. We reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free lis
|
|
|
Angle Drive Gear Curtis Machine Company 2:1 Ratio
This is an angle drive gear. Curtis Machine Company. It is 2:1 ratio. Both shafts measure about 3/4" It has this stamp on it 002824. Also has 11/28/88. Also has 200 on it and 922989. Not sure what that all means. In as is good used condition. I Ship only in the Untied States. I take only Paypal. Pay within 5 days after auction has ended. Ships out within in 7-10 days of payment. I charge a flat rate for shipping. Sometimes I over charge and sometimes I don't charge enough. I do not refund any money to my buyers if I over charge. It is a flat rate for all buyers. Not responsible for any item that gets lost or damaged in the mail. Items do get damaged in the mail. Shipping insurance is your expense. You will have to add that at payment yourself. or let me know.
|
|
|
SQUARE D A-C AMPERES PN:63090 224 070001
THIS IS A SQUARE D A-C AMPERES PN: 63090 2241070001. IT IS USED AND A LITTLE DUSTY. Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1420840e61e-0xfa-
|
|
|
Falk 2090Y1-LR 300 HP 3.650 Ratio 1150 RPM In 315 RPM Out 1.63 SF Gear Reducer
The Falk Corporation Enclosed Gear Drive Model: 2090Y1-LR M.O. 9-065768 Ratio: 3.650 Input RPM: 1150 Output RPM: 315 Service Rating HP: 300 Service Factor: 1.63 Date: 10/90 Approx. U.S. Gal: 11 This Gear Drive was only in service for a few months(has very little use) until factory shutdown. Turns very easily. We try to represent the items we sell as honestly as possible and include plenty of detailed pictures. If you buy from us we will do our utmost to make sure that you are completely satisfied. Anything bought from RCI comes with a 30 day warranty. If you need additional photos. They can be sent to you upon request. If you have any questions, we will do our best to answer them. Unit includes ONLY what is shown in picture(s) above unless otherwise noted. Our business has been in operation for over 2 5 years.
|
|
|
Gear Motor by Franklin Electric 36 RPM
on/off line switch. weight 26 pounds. Shipping only to lower 48 states. NO RESIDENTIAL DELIVERIES! Buyer has 72 hours to pay. Seller has 72 hours to ship. Hello. This is Bill and I run Solatec Printing. After nearly 50 years in the printing business I am in the process of downsizing. If you have any questions concerning any of the items offered. Do not hesitate to call me at 1-256-539-3111 and if I am not available I will most likely call you back within two hours. When you call. Please leave your name, number, and interest and timezone you are located. Please speak slowly! All merchandise is sold as-is. Without warranty. NO REFUNDS NO RETURNS NO WARRANTIES All shipping costs will be the responsibility of the buyer/purchaser. All items purchased may be picked up by the buyer. Upon request. Forklift truck. Pallet jack and loading dock are ... moreavailable to facilitate loading. Upon request merchandise will be banded onto a pallet to facilitate shipping. Buyer has 72 hours to pay. Seller has 72 hours to ship.
|
|
|
REBUILT Falk 252-8EZ3-06A 25 HP 56.95 Ratio 30 RPM All-Motor Gear Reducer Drive
The Falk Corporation All-Motor Motoreducer Model: 252-8EZ3-06A M.O. 80330-20675 Date: 12/80 R.P.M. 30 Ratio: 56.95 H.P: 25 Class: 2 This Gear Drive was never put back into service after being fully rebuilt. We try to represent the items we sell as honestly as possible and include plenty of detailed pictures. If you buy from us we will do our utmost to make sure that you are completely satisfied. Anything bought from RCI comes with a 30 day warranty. If you need additional photos. They can be sent to you upon request. If you have any questions, we will do our best to answer them. Unit includes ONLY what is shown in picture(s) above unless otherwise noted. Our business has been in operation for over 2 5 years.
|
|
|
Sew Euro drive .5 HP 79rpm gear motor
230/460v.5hp motor with gear reduction to 79rpm output. Sprocket uses#60 chain. 19 teeth. I will address any questions, just ask! Unit works fine. Returns accepted within 14 bus days. Buyer pays return freight. 1/2hp motor 22:1 reduction.
|
|
|
browning pulley, 1/2"id.x3-1/4" adjustable speed pulley.
this a very nice clean pulley. Some slight thread wear. fits belts from 1/4" wide to 7/8" in great shape.
|
|
|
BALL BEARING Atlas grade 3 and other size
2 different sizes. I don't know the exact count. Box says grade 3 1/8" and the other size is unknown to me.
|
|
|
SM-CYCLO GEAR REDUCER - 4.27 HP 35:1 1800 RPM 50 OUTPUT CNHJ-6125Y-35
SM-CYCLO GEAR REDUCER- 4.27 HP 35:1 1800 RPM 50 OUTPUT CNHJ-6125Y-35. HP RATING: 4.27. RATIO: 35:1. INPUT RPM: 1750. OUTPUT SPEED: 50. APPROX SHIPPING WEIGHT: 75 LBS. ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close ... morefor any reason. We reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing t
|
|
|
MASTER GEAR REDUCER - 1.5 HP 75:1 1800 RPM 23 OUTPUT C200B75N056K1
MATER GEAR REDUCER- 1.5 HP 75:1 1800 RPM 23 OUTPUT C200B75N056K1. HP RATING: 1.5. RATIO: 75:1. INPUT RPM: 1750. OUTPUT SPEED: 23. APPROX SHIPPING WEIGHT: 65 LBS. ITEM WILL SHIP ON A SKID. CALL FOR QUOTE 503-489-2392. Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for ... moreany reason. We reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's close. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool.
|
|
|
REBUILT SM-CYCLO CHHJ4185BDY187 GEARBOX SPEED REDUCER 6.06HP INPUT 187:1 RATIO
SM-CYCLO GEARBOX/ SPEED REDUCER MODEL: CHHJ4185DBY187 187:1 RATIO SERVICE FACTOR: 1.0 INPUT: 6.06@ 1750 RPM OUTPUT TORQUE: 34.700 IN-LB APPROX. INPUT SHAFT DIA. 3-1/8" APPROX. INPUT SHAFT LENGTH: 4-3/8" NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. Condition: X, REBUILT. UNUSED SINCE NEW. In box NEW. No box NEW. Old inventory USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. ... moreYou will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL
|
|
 |