|
A.O. Smith direct drive Blower Motor 1/5, 1/8, 1/10 HP 1050 RPM 3SPD 115V
Direct drive blower 1050 rpm 115 volt. Used, not sure if it works
|
|
|
Baldor 3/4-Hp 3-Ph Motor & 10:1 Speed Reducer Worm 428 in-lbs 56C 1725-RPM
Questions? Call us: 1-877-328-9236. Baldor 3/4-Hp 3-Ph Motor& 10:1 Speed Reducer Worm 428 in-lbs 56C 1725-RPM. Manufacturer: Baldor Model: Various Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Baldor Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: When power was applied this motor reducer combination ran very smoothly. They were not tested under a load. No further testing was performed. NOTE: This item does not come equipped with a turn-key. The oil has been drained for shipping. It is the responsibility of the buyer to add the right amount of oil to the reducer for proper operation. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Baldor 3/4-Hp 3-Ph Motor& 10:1 Speed Reducer, Specifications: ... moreMotor: Manufacturer: Baldor, Cat# VM3542, Spec. 34A63-883, 3/4 Hp, SF: 1.25, 60 Hz, 3 Phase, V: 230/ 460, A: 3/ 1.5, Time Rating: Cont, Class: B, Frame: 56C, 1725 RPM, Encl: TEFC, Bearings: DE: 6203 ODE: 6203, Reducer: Manufacturer: Baldor, Cat.Spec# GR0132C100, SN: I0409290161, Rated at 1750 RPM input, Ratio: 10:1, Output Torque: 428 in-lbs, Max. Input Hp: 1.34, Shaft Diameter: 7/8" SKU: O24L011 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. Dou
|
|
|
DAYTON 3M580 HVAC (Shaded Pole) Motor,1/10 HP,1550 rpm,115V
You are viewing a DAYTON 3M580(Shaded Pole) HVAC Motor.1/10 HP,1550 rpm,115V Nice shape. Had been used sparingly.
|
|
|
Magnetek Century AC Motor MOD: 10-186640-20 HP: 3/4 RPM: 3450 Volts: 115/230
Magnetek Century AC Motor Jet Pump Duty MOD: 10-186640-20 SER: BR10-28 HP: 3/4 RPM: 3450 Volts: 115/230. Type: CS HZ: 60 Amps: 7.1/14.2. AMB: 40'C SF: 1.65 Time: CONT. Code: M ENCL: DP FR: U48Y. Form: PJM INS: B PH: 1 Be sure to add me to your! And check out my! By adding my eBay Store to your Favorites.
|
|
|
BODINE ELECTRIC DC GEAR MOTOR SERIES 400 NSH-34RH 115V 1/15HP 173 RPM RATIO 10:1
USED BODINE ELECTRIC DC GEAR MOTOR SERIES 400 NSH-34RH 115V 1/15HP 173 RPM RATIO 10:1 What you see on the picture is what you will get. You will receive the quantity of 1(one) BODINE ELECTRIC NSH-34RH GEARMOTOR. Shipping We ship the item within 1 business day after payment is received. We ship Worldwide. Payment We accept payment via PayPal. Sales tax applies in Wisconsin; taxes will be calculated at checkout. Return Policy We offer a 30 day return policy. Items are only returnable if they have original packaging. Buyer pays return shipping. On free shipping items. You will still be responsible for the outbound shipping charges incurred by Home and Living. There is 20% restocking fee from the purchase price if item is not defective upon our inspection. Or wrong item ordered. Shipping fees are not refundable. Products may be returned without ... morerestocking fees if they have been damaged during shipping and are no longer in flawless condition or if they contain blemishes or defects caused by the manufacturer. All damaged products must be reported to us no longer than 30 days after delivery has been completed. To report a damaged item please email us through your eBay account. We usually respond to all damage-related issues within 1 business day. B-39-B-1-3-ARS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Prab Hydraulic Power Unit W/ Dayton Motor 10 Hp 1755 RPM 60 Hz E5~ 18201LR
Hydraulic Power Unit Used, Prab Hydraulic Power Unit W/ Dayton Motor 10 Hp 1755 RPM 60 Hz, 230/460v, W/ Allen Bradley Pressure Control, 735 LBS, Condition Unknown, As is, Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you Return Policy Within 30 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply ... moreInc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
|
|
|
AC INVERTER DUTY MOTOR, 230/460/3/60, 10 HP, 1755 RPM, 215TC FRAME,
MFG: Category: Parts Part/Model# AC INVERTER DUTY MOTOR. 230/460/3/60, 10 HP, 1755 RPM, 215TC FRAME, Description: 1- WESTINGHOUSE TYPE AEHH-8N. CAT# EP0104C, AC INVERTER DUTY MOTOR, 230/460/3/60, 10 HP, 1755 RPM, 215TC FRAME, TEFC ENCL. USED- GOOD VISUAL CONDITION- E-OK SSTK 11520 C-6-11-2-B 250# JC Payment Policy Payment through PayPal or Call 877-859-3015 for Credit Card approval. Return Policy Returns accepted within 14 days. Items sold as is cannot be returned. Unless description is in error. Buyer pays return freight. Shipping Policy NORTH AMERICAN BUYERS ONLY
|
|
|
Lincoln 10 HP AC Motor 200/400 Volt 1745 RPM 60Hz 215TC TEFC
Lincoln AC Motor Type TEFC Frame 215TC. 200/400 volts. Three Phase. Continuous rating. This motor was going to be used in a variable frequency drive for an electric car. It has zero hours of operation time.
|
|
|
Fasco 1092-002-10 7121-8342 Replacement AC Motor 115V 1/40 Hp 3000 RPM 1/4"Shaft
574-825-4990 SKU: 50146 Fasco 1092-002-10 7121-8342 Replacement AC Motor 115V 1/40 Hp 3000 RPM 1/4"Shaft. Brand: Fasco Condition: Used Model: 1092-002-10 Country of Manufacture: United States Consigner: C Items in Lot: 1 Lister: 4 Weight(lbs. Oz) 4 Motor has a 2" OD pulley mounted to shaft. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. ... moreCredit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with
|
|
|
NORD INVERTER DUTY MOTOR, 2 HP, 1660 RPM, 90L/4 CUS w/Brake 10 NM
NORD INVERTER DUTY MOTOR. 2 HP, 1660 RPM, 90L/4 CUS w/Brake 10 NM Nord Drivesystems. Model Number: MTR: 90L/4 CUS BRE20 FHL RG Rotation: 230/460 PN: 8009449573.00 HZ: 60 Seller notes: This item is Used it was removed from a working environment in working condition. Item has not been tested after removal and is being sold as used. Sold exactly as pictured If you have the winning bid. The item belongs to you and may not be returned. Item will be sold“AS IS” condition is USED, item is USED and all conditional requirements are based on appearance. Buyer to pay all shipping based on an actual estimate from eBay. Buyer to contact me within 48 hours of auction end and payment is due within 3 days of auction end. Thanks for looking and please ask any questions I didn't address in the listing.
|
|
|
Dayton Model 3M103 Gear Motor 10 RPM 1/60 hp 115V
Dayton Electric Motor AC Parallel Shaft Shaded Pole Gear Motor Shaft = 3/8" x 1" Rotation = CW Facing Output Shaft Thermal Protection = None 115 volts. 60hz. 220-240 volts. 50hz. 10 RPM 1/60 hp 1.65 amps. 115V 60hz. Run Torque 65 in. lbs. Over Hung Pounds = 7 Sold"as is" I have no way of testing it.
|
|
|
10,000 RPM Replacement Motor New Hermes Engraver Engraving Machine
10.000 RPM Replacement Motor New Hermes Engraver Engraving Machine in good working condition. No mounting screws. Runs steady, checked the brushes and they have little wear. Very good cord. Thanks for looking.
|
|
|
DC Motor, 10 HP, 1750 RPM, 240 Volts, Frame 528AT, Reliance
Vertical Motor. Mfr: Reliance Electric. Hp: 10. Rpm: 1750. Volts: 240. Frame: 528AT. Amps: 36. Type: TR. Please let me know if you have any questions.
|
|
|
ALLEN organ Gyrophonic Leslie Tremolo ROBBINS MYERS M330 Motor 1/10 HP 1650 RPM
720E ALLEN organ Gyrophonic Leslie Tremolo ROBBINS MYERS M330 Motor 1/10 HP 1650 RPM I've been selling on eBay since January 1999. My feedback speaks for itself with over 14 years of helping buyers fulfill their quest to find just the right item. Bid with total confidence. Product Description: This is the motor which powered the Allen 312 Gyrophonic Projector leslie speaker box. Comes with capacitor and works great. Ready for your project! Shipping: I ship USPS ground and take great care in assuring your item arrives safe and sound. The shipping fee for this item is $10 mainland USA and includes full insurance. Guarantee: This is a used item BUT I want you to be fully satisfied with your purchase. Therefore I offer a full refund if this item does not meet your expectations UPON initial receipt. I guarantee the item to be as described. ... morePlease contact me directly with any questions. Questions? Feel free to call or text with your questions at(three zero three) 717-8758. You can also of course use eBay's message system.
|
|
|
Used 10" Squirrel Cage Ventilation Fan Blower Motor 1/3 HP 1725 Rpm 115v 5.9 Amp
Selling With No Reserve! Hi! I have for Auction here a working 10" Squirrel Cage Blower Fan. It is 115v. 5.9 Amp, 1725 rpm, 1/3 HP. Blows alot of air. Inside of Exhaust measures Approx. 11-1/4" high x 13" wide. The metal frame that is attached to the blower will be taken off for shipping purposes(is not included in listing) Overall diameter of the blower is 16" The motor may need a new adjustable rubber mount. It has some dings/dents, scratches, etc. Selling as is. See Pictures. Get yourself a great deal here. Local pick-up is always welcome. But I require cash payment or there will be a $25 fee or 10% whichever is greater! I will combine shipping if you buy multiple items. But I can't send the combined invoice until Monday afternoon. Do not pay for the items before you recieve the combined invoice. I will not refund ... moreany money after items are paid. For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with yo
|
|
|
Used Quipp PN8 658 Speed Reducer 1.39 HP motor 56 C frame ratio 1:10 1750 RPM
This auction is for(one) Used Quipp Speed Reducer PN8 658. 56 C Frae, Ratio 1:10, 1750 RPM. I think it is new however, I am selling it as used. It has been tested and it is good. What you see in photo is what you get. If you are looking at it, you know what it is and how much they cost new. I also will be listing a lot of other items in the future. So check out my other auctions. BUYER ASSUMES ALL RESPONSIBILITY FOR CERTIFICATIONS AND LIABILITIES IF THEY ARE TO PUT THIS PRODUCT BACK IN TO SERVICE. PLEASE READ ALL DETAILS BEFORE BIDDING ASK QUESTIONS BEFORE BIDDING IF YOU BID ON THE AUCTION YOU ARE AGREEING TO OUR TERMS AND CONDITIONS. IF YOU DO NOT AGREE OR UNDERSTAND OUR TERMS AND CONDITIONS. PLEASE ASK QUESTIONS BEFORE BIDDING. AUCTION MUST BE PAID FOR WITHIN 48 HOURS. DO NOT TRY TO MAKE US PAY FOR SHIPPING AFTER YOU WIN THE AUCTION. IF ... moreYOU HAVE SPECIAL REQUESTS. CLARIFY THEM WITH US BEFORE YOU PLACE A BID. PLEASE CONTINUE READING THE REST OF THE CONDITIONS BELOW(ALL THE WAY TO THE END) BEFORE BIDDING. Check Out My Other Auctions. I have 100% Positive Feedback. Our goal is a smooth transaction for both of us. Item is offered for sale. As is, where is, and make no warranty, guaranty or representation of any kind. The item may have flaws and/or defects if this is a used item. By submitting a bid, the bidder agrees to pay for the item within 48 hours. If you win the auction and you’re not completely satisfied when you receive the item. Email us through eBay within 3 days of receiving the item and ask for a return authorization approval. You can return it for a refund(minus listing& shipping fees) Buyer pays all return shipping costs. You must notify us before returning items. If a problem is not brought to our attention by day three, the item cannot be returned. Returned items must be post marked within 14 days of the day you received the item. Calibration Issues, Software codes, Passwords, Licenses, BIOS Upgrades or any software issues are not covered by our DOA warranty as we are selling hardware only. Re
|
|
|
10 HP STAINLESS STEEL PUMP 1,755 RPM MOTOR SPEED
10 HP STAINLESS STEEL PUMP 1.755 RPM MOTOR SPEED Click Images to Enlarge 10 HP STAINLESS STEEL PUMP 1.755 RPM MOTOR SPEED 230/460 VOLTS 3" TOP FLANGE OVERALL MEASUREMENTS: 32" x 14" x 18" PLEASE CALL FOR WEIGHT LOADING FEE: $25 WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing ... moreon items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodwor
|
|
|
Novatec Dual Cyclone Separator Push Pull Pump Model VH-10 10HP, Motor 1740 RPM
For your consideration. Novatec Push Pull Pump Model VH-10 with Novatec Dual Cyclone Separator 10 HP Motor Marathon 10 HP Motor 1740 RPM. 208-230/460V, 215T Frame 45 URA 1 All items are for sale locally and are subject to prior sale. Please contact us with any questions!
|
|
|
Hurst Synchronous Motor 115Vac @ 60 Hz 7.5W 10 Rpm
PULLED FROM A CLEAN WORKING ENVIRONMENT AND TESTED WORKING. FAST FREE SHIPPING! THANK YOU FOR LOOKING! LOCATION:WIN-3-2A
|
|
|
Bitfenix 120mm Fan Brushless DC Motor CFM 43.5 ± 10% RPM 1000 ± 10%
Item Description: Superb Used Condition Works Flawlessly. Please view all pictures carefully to ensure the item meets your quality standards. Dimensions(mm) 120 x 120 x 25- Current(A) 0.16±10% Speed(RPM) 1000±10% Air Flow(CFM) 43.5±10% Noise(dB-A) Air Pressure(mmH2O) 0.62- None LED Policies: Shipping: Item is Shipped within 24 Hours of payment with tracking info via USPS. Feedback: Positive Feedback will be given within 24 hrs of payment. Returns: eBay's Hassle Free Returns
|
|
|
CENTURY 10 HP 1750 RPM 230/460v compressor motor 6-355805 TYPE SC, S215T
CENTURY 10 HP electric compressor motor. See the picture of the spec sheet for details. This sale is for local pickup only, however if you are able to arrange shipping, I will do what I can to help you. This motor is very heavy, so I cannot offer a quote. My ask price is $295(looks like a new one with close specs is in the $1500 ballpark) If you buy it and it doesn't work, bring it back to me WITHIN 2 DAYS of purchase, and I will refund you $250 cash. Very fair price of poker in my opinion. On day 3, its yours for keeps no matter what. It had a tag on it that said it was working when removed. I have no way to know for certain. Any questions, please call or text me@ 813-453-5723. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-1478e7c2aca-0x10b-
|
|
|
Lincoln Motors 10 HP Hostile Duty 9VA AF2P1061 Electric Motor 3495 RPM 2900 RPM
Lincoln Motors Hostile Duty 10HP Electric Motor. Used Working Condition Model: 9VA AF2P10T61 L 10 Horse Power RPM: 3495/ 2900 VOLTS: 230/460. 208/415 AMPS: 24/12. 26/13 HZ: 60. 50 SF: 1.25. 1.15 SF AMPS: 30/15. 30/15 EFF:NOM/M: 89.5/87.5. 87.5/85.5 Questions? If you have any questions. Please call Brittany(336) 582-0504 between 9am-7pm EST, or e-mail us through Ebay and we will respond promptly. Shipping Costs& Zip Code Info: Buyer is responsible for all shipping costs. We do combine shipping. If you are purchasing more than one item. Please wait for us to send you an invoice with all purchases combined to get the best shipping rate. International Buyers: MUST handle your own Shipping and any forms(like customs forms) that would be required for the shipment, we will only provide a commercial invoice and the weights& measurements for ... morethe shipment. We will not claim that any items are“gifts” Pick-up an Item: We do encourage local pickup of items. We are located in Burlington NC 27217. Please call or email first to make an appointment. Sales Tax: North Carolina residents will be required to pay 6.75% sales tax. Payment: Please notify us of your intentions of paying within 3 days after auction ends. We are flexible and understand that you may need a little more time to pay for your item. But please do not abuse this privilege. Purchased items must be paid for within 14 days of your commitment to buy. If the item is not paid for in this time. An unpaid item case will be filed with Ebay in an attempt to recoup our listing and final value fees. Once the case is closed. The item will be relisted for sale. Non-payment of purchased items will result in negative feedback. Forfeit of Abandoned Items: Maximum storage time is 90 days. The buyer forfeits the item and any payments made when 90 days from the sale date has been reached. No money will be returned for forfeited items. Items are subject to re-listing immediately upon forfeiture. If you think you may have reason for delayed pickup. Contact us in advance to get
|
|
|
SOUTH BEND 10L HEAVY 10 LATHE MOTOR 7/8" SHAFT 1 HP 1725 RPM 1 PH
SOUTH BEND 10L HEAVY 10 LATHE MOTOR 7/8" SHAFT 1 HP 1725 RPM 1 PH Brand Westinghouse Packaging None Condition Very Good Quantity 1 Motor needs to be wired. I ran fine when it was conected to the lathe. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Bodine DC Motor NSE-12. 1/10 HP 10,000 RPM 115V AC WEC Variable contol included
Variable Runs good
|
|
|
Dayton 2M184A Gear Motor W/reverse HP 1/15 115V approx 8 to 10 RPM 1/2" shaft
Runs Good W/wire exchange for revers. low RPM
|
|
|
BALDOR MOTOR 10 HP 1725 RPM 215TC FRAME & RACINE PUMP SV-20 PSV-6925999 UNIT
BALDOR INDUSTRIAL MOTOR 10 HP RPM: 1725 FRAME: 215TC VOLTAGE: 208-230/460 AMPS: 28-26/13 Hz: 60 PHASE: 3 MOUNT: C-FACE AND FOOT MOUNT CAT. No. CM3714T SPEC. 37A02Z50 RACINE PUMP SV-20 PSV-692599 MFG No. 6925999 15 GPM@ 100 PSI& 1800 RPM NOTE: USED- Pulled from working units. In Good condition. Coupling included. Call us for a freight quote. CALL IF YOU NEED EXPEDITED SHIPPING 716-871-7070 11165. 14 day return for DOA. Parts must be in same condition as was sent to qualify for a refund. You must call for an RMA number prior to returning any item. Return item must be insured to value of purchase. Return policy only applies to USA shipments. All claims for shipping damage must be made with the carrier. The winning bidder agrees to contact the seller within 72 hours of purchase and have payment completed within one week if not paid through ... morePaypal or credit card. We will file a non-paying bidder report and issue negative feedback if timetable is not followed. And reserve the right to offer the item to a back bidder, or re-list the item. If you are pickup up the item at our warehouse. Items must be picked up within two weeks of auction unless other arrangements are made. Storage charges will begin to accrue at two weeks, and the item will be forfeited in 60 days if not picked up and the item will be re-listed. All shipping. Handling and rigging costs are the customers responsibility. All bids and purchases are legal and binding. Purchaser acknowledges that purchaser is responsible for using the purchased products safely and hereby agrees to indemnify and hold harmless the seller. This website, its owners, employees, agents and affiliates for any and all legal action arising from the purchase, use or ownership of products and r accessories from this web site, including but not limited to any lawsuit or claim by myself or a third party for bodily injury or, death. By purchasing from this site, I, the purchaser, indicat
|
|
|
dayton gearmotor 115v 60hz Model 3M136 rpm 12 hp 1/10 torque 113 class A motor
Greetings to all my customers. Please keep in mind that everything I sell we have a limited supply of or we MAY HAVE ONLY 1. This means if you see something that is a really good deal and you can stock up you should. Because once it is gone then it is gone. Also. Please keep in mind that if there is a problem with an item contact me. I will resolve it to your liking. I have a 100% Satisfaction policy I intend on keeping strong:
|
|
|
DELCO 10 HP ELECTRIC MOTOR 1165 RPM MODEL B 2492
DELC 10 HP 1165 RPM 3 PH ELECTRIC MOTOR WITH PLUG AND CONTROL BOX MODEL B-2492
|
|
|
Talboys Instrument CORP. Bodine Motor 1/50 HP 10:6:1 5000 RPM
1/50 HP 10:6:1 5000 RPM. Model 106. Volts 115. Amps 4. CY: 50-60. Duty: COntinuous. Temp rise: 40 degrees C. Torque: 15 in lbs. RPM: 500-1000. Ratio: 10:6:1. Ask questions if you have any before bidding. I have a control resistor for this one of the big kind. If you want it, it will be 10 dollars for the resistor and 15 additional for the shipping( its heavy) I have several so I can give you a range of options. I have some other bodine motors if you want additional ones I can break you a deal. Just ask. International buyers ask before bidding.
|
|
|
Marathon Severe Duty Motor 10 Hp,3485 Rpm,230/460Volts Part # 3VM 215TTFS8309BPL
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬. Marathon Electric Severe Duty Motor Serial No. 68442 Part No. 3VM 215TTFS8309BPL Type TFS Frame 215TC Des B Ins. Class F3 Duty Continuous Phase 3 Max. Ambient 40°C Hp 10 Hz 60 Volts 230/460 Service Factor 1.15 Rpm 3485 F.L. Amps 25.2/12.6 Code G Corr. Amps 22.0/11.0 Max Cap Kvar 3.6 Nema Nom. Eff. 84.0 Nom. P.F. 85.7 Secondary Hp 8 Volts 230/460 Hz 50 S.F 1.0 F.L. Amps 27/13.5 Rpm 2850 Shaft End Bearing 309 Opp. End Bearing 206 Severe Duty 161-012-10 Approx. Weight of 275 lbs. Please call customer service for a shipping quote@ 704-827-6449 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬. INTERSTATE SURPLUS We are a very diverse surplus dealer in Belmont. North Carolina. We buy and sell all types of Industrial Surplus& Hardware related items. Interstate Surplus has ... morebeen in business since 1988. Please read the auction carefully and ask questions before buying. The picture will be the product you receive unless there are multiples. We also will combine shipping on multiple items. If you have any question or concern regarding this product or any other product feel free to email us or call our costumer service at(704)827-6449 4-3-4-b lct
|
|
|
STOBER DRIVES K102SF0040D90L4 1.5KW 480V-AC 1725 RPM 1.10:1 GEAR MOTOR B443172
Product Specifications. Brand: STOBER DRIVES, Condition: Used, Model: K102SF0040D90L4, Power: 1.5 KW, Voltage: 220- 240 V-AC. 380- 420 V-AC, 220- 277 V-AC, 280- 480 V-AC, Motor RPM: 1725 RPM. 1400 RPM, Phase: 3 PH, Voltage Type: AC Motor Type: Gear Gear Ratio: 1.10:1 Shipping Weight: 73 lbs, Shipping Dimensions: 20 x 11 x 9 in, SKU: B443172(CTO) Category: Electrical· Electric Motors, Additional Notes: 1-1/8 IN SHAFT Product Photos. $350 USD- We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving ... morecleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and d
|
|
|
DAYTON 2M170D 1 HP MOTOR - 90 V - 1725 RPM - 10.9 AMP - EXCELLENT CONDITION
You are buying a Dayton DC electric motor as described. Take notice that the wire box is not with the motor. See pictures and specifications…EL-1118/B1…NOTE: I give a 60 day warranty that all my motors run properly unless otherwise stated.This motor does not come in its original box and may have some scratches and or marks on the casing. SHAFT- 5/8" x 1 7/8" Keyed… FRONT MOUNT- 4 1/4" Bolt to Bolt… BASE MOUNT- 3" Front to Back x 5" Side to Side on Center Overnight shipping is available for most items. There would be an additional fee for overnight shipping. I do discount shipping if you combine purchases of my inventory. I will refund the difference on multiple purchases upon the completion of a sale. Thanks for looking.
|
|
|
MARATHON 10 HP AC INDUCTION MOTOR 230/460 VAC 3540 RPM 215TC FRAME 3 PHASE
MARATHON 10 HP AC INDUCTION MOTOR W/ MARATHON ENCODER MODEL No. AVF215THTL7726ETR143I 230/460 VOLT AC 3540 RPM 215TC FRAME 3 PHASE- 60 Hz- 4 POLES 27/13.5 AMPS SHAFT: 3" LONG X 1-3/8" DIA SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS LOCATED GREEN Q-3 JD
|
|
|
US Electric Enclosed 3 PH AC Motor 7.5 HP 1800 RPM 220/440 V 10/20A 254U
Enclosed AC Motor For sale is one US Electric Enclosed AC Motor. Item is used. But in good working condition. Unit shows signs of cosmetic wear, including scratches and scrapes, but nothing that will affect the unit’s function. HP: 7.5 Ph: 3 Hz: 60 Frame: 254U Volts: 220/440 RPM: 1800 Type: J Rating: 55 Deg C Cont Hi-Volt Amp: 10 Lo-Volt Amp: 20 Design Code:B Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence or a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves or we can provide a competitive quote to the buyer. Shipping weight is estimated to be 350 lbs. PLEASE NOTE: Due to the way freightquote.com ... morewords their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and businesses. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
US Electric Enclosed 3 PH AC Motor 10 HP 1200 RPM 220/440 V 13.5/27A 284U
AC Motor For sale is one US Electric Enclosed 3 Ph AC Motor. Item is used. But in good working condition. Unit shows signs of cosmetic wear, including scratches and scrapes, but nothing that will affect the unit’s function. Unit has“scrap” written on it by the previous owner, indicating this was surplus, not that the motor was non-functioning. HP: 10 Ph: 3 Hz: 60 Frame: 284U Volts: 220/440 RPM: 1200 Type: J Rating: 55 Deg C Cont Hi-Volt Amp: 13.5 Lo-Volt Amp: 27 Design:B Code:G Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence or a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves or we can provide ... morea competitive quote to the buyer. Shipping weight is estimated to be 450 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and businesses. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
powerful Magnetek 10-186557-01 electric motor 4.5HP (2-speed) 3450 RPM
This is a powerful 2-speed Magnetek 10-186557-01 electric motor. Rated 4.5 HP. 3450 RPM, 12 amps. Spins counter-clockwise. Connected for 230 volts but also works with 120V(single phase) Shaft measures 2" 5cm) by 1/2" 13mm) The motor works perfectly and runs smoothly. Weighs 30 pounds.
|
|
|
Telechron H3 F Clock Motor Rotor Quiet 60 cycle 10 tooth 3.6 RPM
M1313. This just had fresh lube added and is running quietly.
|
|
|
10 HP RELIANCE ELECTRIC MOTOR, 3495 RPM, 230/460 VOLT, 215T FRAME
ITEM# 12359 10 HP RELIANCE ELECTRIC MOTOR. 3495 RPM, 230/460 VOLT, 215T FRAME*WE CAN TEST RUN PRIOR TO SHIPMENT. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the ... morecheck has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
10 HP BALDOR MOTOR, 3500 RPM, 460 VOLT, 215T FRAME
ITEM# 12362 10 HP BALDOR MOTOR. 3500 RPM, 460 VOLT, 215T FRAME TEST RUN VIDEO ON FILE. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank ... morefor payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Fasco 7409P029-60 1550 RPM 1/10 HP Electric Motor Blower
i000000. Fasco 7409P029-60 1550 RPM 1/10 HP Electric Motor Blower. This is in good used shape and works. As Is Please See Pictures Shipping& Handling Time is 4 Days.This means your item will be shipped out within 4 business days after payment is received. I strive to ship within 1 business day of receiving payment. I am a one-man operation and try to serve you the best that I can. Sometimes there are unforeseen events that can slow down the shipping process. If you have any questions please ask NO INTERNATIONAL SHIPPING Terms I do not claim to be expert on any of the items that I sell. Please do your own research and make sure you know what you are buying, You will receive the item as it was describe on my listing. NO INTERNATIONAL SHIPPING! inkfrog terapeak. InkFrog Analytics.
|
|
|
BODINE GEAR MOTOR NSE-34RH CONVEYOR MOTOR 115 VOLT 1/8 HP 500 RPM 10:1 RATIO 01
Sale is for One(1) USED BODINE GEAR MOTOR NSE-34RH 115 VOLT 1/8 HP 500 RPM This has scratches.Paint spatters and a little dirt It has been tested and works The motor in the photos is the one you will receive This runs on 115 volt single phase These Bodine motors are a work of art from the assembly to the gear-head some of the finest craftsmanship in motor building today This comes as shown Specs; Manufacturer- Bodine Type- NSE-34RH Volts- 115 single phase no capacitor needed Amps- 1.7 HP- 1/8 Rpm- 500 Torq- 12 LB-IN Ratio- 10:1 Shaft- 5/8" Weight-12.8 Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 We Combine Shipping Location- A-1-3 Inv#UNI001 Thanks Kurt 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-148240bc20a-0x114-
|
|
|
BODINE GEAR MOTOR NSE-34RH CONVEYOR MOTOR 115 VOLT 1/8 HP 250 RPM 10:1 RATIO 02
This comes as shown Specs; Manufacturer- Bodine Type- NSE-34RH Volts- 115 single phase no capacitor needed Amps- 1.7 HP- 1/8 Rpm- 250 Torq- 22 LB-IN Ratio- 20:1 Shaft- UNKNOWN
|
|
|
Light Rail 3.5 Intelli-Drive 10 rpm (Motor Only) HPS MH Hydroponics Lot
This is a for a used Gualala Robotics Light rail intellidrive 3.5. It is used but works well.
|
|
|
Synchronous motor - lot of 7 - 10 rpm - 110 v
Synchronous motor- lot of 7- 10 rpm- 110 v- Eagle Signal Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Reliance Super RPM DC Motor M27857-T1-XM 10 HP C1812ATZ T18R1302G-356
Used Reliance Super RPM DC Motor Ident. No. M27857-T1-XM 10 HP Frame: C1812ATZ T18R1302G-356 1750/2300 RPM 240 VOLTS 37.00 AMPS Encl. DPG Will Ship Freight from Hamilton. OH 45011 90 Day Guarantee International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. T hese charges are the buyers' responsibility. Please check with your country's customs office to determine what these additional charges will be prior to bidding or buying. Location- PRIMSA B2RA2 GRBG ACR
|
|
|
BALDOR INDUSTRIAL MOTOR 10 HP. CAT# M17 1725 RPM 3PH 208-230/460
BALDOR INDUSTRIAL MOTOR 10 HP CAT# M17 1725 RPM 3PH 208-230/460 NOT ACTUALLY SURE IF THIS HAS BEEN USED OR NOT IT DOES HAVE SOME MINOR SCRATCHES-SCUFFS ON PAINT JOB
|
|
|
VINTAGE ASHLAND HYSTERESIS SYNCHRONOUS MOTOR 35C96-10 600/1200 RPM
Here is a vintage Ashland Electric Products Hysteresis Synchronous motor. Specs are in the pictures Please be courteous and pay promptly within 2-3 days. BE SURE TO CHECK OUT OUR OTHER GREAT VINTAGE ITEMS FOR SALE AT: RIATLA, RIATLA2 and RIATLA3 100% GUARANTEE GOOD ON ARRIVAL! WE GLADLY COMBINE SHIPPING! Please send a message if you have any questions Allow longer delivery time for international shipping. Please contact us prior to opening a dispute or case with Ebay. We can fix the problem faster this way. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
10 units Setco Motor Spindle 1.5 Horse Power 230/460 3 Phase 3600 RPM Air Purge
10 pieces of used Setco Precision Spindle. Setco Precision Spindle used for grinding. These motor spindles are a precision grinding system with Air Purge. Setco# 6101.5.36G 3600 RPM 230/460 3 Phase 1.5 Horsepower Model 250 Some of these motors are working and some need new bearings. These motors will sell on a"as is basis" with no guarantee. For more information: 714-206-2862
|
|
|
US Motors 10 HP Electric Motor Catalog No H21663 1760 RPM
This is a US Motors 10 HP Electric Motor. Catalog/Model No H21663. It is in good used condition and was just removed from a working system. RPM 1760 Frame 215T 3 Phase 208-230/460 Volt 27.2-24.6/12.3 Amp This auction is for one motor. But there are two available and we have included photos of them both. They are available for local pick up in Allentown, PA. If you are interested in freight shipping, please send a message including your zip code and indicate if you need residential or business delivery. Please enlarge and examine photos closely for additional details. Please wait for an invoice before making payment if you require freight shipping. Any questions. Please ask. Thanks for looking. PA residents and local pick ups add 6% sales tax. Should you have any problems after receiving an item. Please contact us prior to leaving feedback ... moreso that we may have an opportunity to resolve any issue you may have. We will palletize. Band and shrink wrap you item. We do our best to ship your item within 3 business days of receiving cleared payment. You are welcome to arrange your own freight shipping. Payment is expected within three days of the sale. We will store your item for 14 days as a courtesy. But thereafter storage fees will apply. We will always attempt to resolve any issue that leaves a customer unsatisfied. And will offer a full refund if the item is dead on arrival or not as described. We are not experts and recommend that you check with the manufacturer regarding your required technical specifications.
|
|
|
DC ELECTRIC MOTOR, 10 HP, 1750 RPM, 256UC9168D FRAME, 240 ARM. VOLTAGE,
BALDOR.30D43-978-DC ELECTRIC MOTOR, 10 HP, 1750 RPM, 256UC9168D FRAME, 240 ARM. VOLTAGE- 300/150 FIELD VOLTAGE, REBUILT- SS86-7154-C-6-10-4-B-FREIGHT-JC Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WEG 10 HP Electric Motor, 208, 3 Phase. 1165 RPM
This is a WEG 10 HP Electric Motor. It was removed from an industrial dough mixer. Has been tested, and works(see video) This kettle sells for almost. Buy here and save! Manufacturer WEG Model BLN-10-12-256T Serial Number Power Requirements 208. 3 phase, 30 amps, 1165 RPM Height/Width/Depth: Used/New Used Tested/Working Tested and works. This item will ship via a Freight Carrier. Stated flat rate shipping price is for a Business Address only. Standard freight shipping is to a business address with no liftgate for delivery. If you need a liftgate to remove the item from the truck or need this delivered to a residence. Please contact us for a freight quote. We combine shipping. Please contact us prior to paying for a combined shipping price if you are bidding on freight sized items. Buyer must be available when the Freight Carrier arrives to ... moredeliver the item. They cannot'drop off' the item like a UPS item. Removal of the item from the truck is the buyers sole responsibility if you do not have a dock. If you need liftgate service please contact us prior to paying for your auctions. For more information on how freight shipping works go. Items can be picked up at our warehouse. And buyers are welcome to arrange their own freight. Please contact us to schedule an appointment for pickup. We ship to the 48 Continental US States only. We accept Paypal or credit cards by phone at 800-213-9807 x1 We can also take Wire Transfer Payments. Please contact us for details. We charge 8% tax for New York State residents or if the item is picked up at our warehouse by the buyer. Our normal business hours are 8:00am- 3:30pm Monday- Friday. Most of our items are Used items. To keep our prices low. We do a cursory cleaning on the item only. Your item may need extra cleaning before use. Due to Paypal restrictions. We cannot accept Paypal payments for customers wishing to pick up their items locally. We accept Credit Cards, Wire Transfers, or Cash, for pick up order payment.
|
|
|
GE 1/10 HP Electric motor 1050 RPM 115V
1/10 hp motor 115 v 1050 rpm. Works fine
|
|
|
Arrow Model 6000 1/10 HP, 6000 RPM Max. Stirrer Motor w Stand
This is a listing for Arrow Model 6000 1/10 HP. 6000 RPM Max. Stirrer Motor w Stand What you will get: 1 Arrow Model 6000 1/10 HP. 6000 RPM Max. Stirrer Motor 1 Stand Description: An Arrow Model 6000 1/10 HP. 6000 RPM Max. Stirrer Motor w Stand in good condition. This is my item 8555 and 8607. No impellers are included with this item. 2 of these are available. A low cost and light duty stirrer ideal for stirring light to medium-light viscosity fluids. This direct drive stirrer delivers 16.8 in-ozs or 1.05 in-lbs of constant torque throughout its speed range of 0 to 6000 RPM Specifically designed with the workplace in mind. All models are State of The Art in Laboratory Stirrers. These variable speed stirrers are electronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid. Depending on ... morethe model. Totally enclosed non-ventilated motor. Keeps corrosive fumes and dust out for a long and trouble free service life. Permanent magnet D.C. motor provides maximum constant torque through entire speed range. An on/off switch for quick stopping if necessary. Overload protection- a manually resetable circuit breaker for total safety. Eye level heavy cast aluminum control box integrated with motor keeps workplace uncluttered of unnecessary gadgetry and away from corrosive spills or splashes and allows for efficient and safe use of stirrer. Eye level control knob electronically regulates speed of application required. Each model comes complete with a 9/16 dia. x 10" long aluminum support rod and 6 ft three wire cord with grounded plug. And these units have stands included. Arrow Model 6000 Features Horse power: 1/10 Batch size water: 20 liter Description: Light Duty Gear ratio: Direct Max. rpm: 6.000 Torque: 1.05 in-lbs Power: 120 VAC 60 Hz or 230 VAC 50 Hz Consumption amp: 0.8(80 watts) Motor shaft dia. 3/8" Motor dimensions: dimensional drawing of stirrers available upon request Weight: 8 lbs(3.6 kg) Documentation: Free shipping in the USA If you receive your it
|
|
|
WEG 10 HP ELECTRIC MOTOR 010180P3E215T 208-230/480 VOLT 1760 RPM 3 PHASE
WEG ELECTRIC MOTOR MODEL 010180P3E215T 10 HP 208-230/480 VOLT 1760 RPM 3 PHASE INDUCTION MOTOR
|
|
|
AC ELECTRIC MOTOR, 10 HP, 3450 RPM, 200V, 3/60, 215T FRAME, TEFC
1-BALDOR-M3711T-8-AC ELECTRIC MOTOR. 10 HP, 3450 RPM, 200V, 3/60, 215T FRAME, TEFC- USED-E-OK SSTK-7140-C-6-7-3-A-119 FREIGHT-JC Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Baldor 10 HP 208-230/460V 3 Phase 1725 RPM 215T Frame Electric Motor
Baldor 10 HP 208-230/460V 3 Phase 1725 RPM 215T Frame Electric Motor. Palo Alto Electric Motor Corporation SINCE 1966 Description: This is a reconditioned motor with factory winding and brand new bearings. This motor has been garage kept and out of the weather. Specifications: Cat#M3714T HP- 10 Volts- 208/230/460 RPM- 1725 Phase- 3 Frame- 215T If you have any questions or concerns please contact our office at 650-493-5585 Fax 650-493-5544 Office Hours 8:00am 4:30pm Monday- Friday Pacific Standard Time More Info at Warranty: By bidding on this item you are agreeing with the following terms: Under no circumstance will the seller be held responsible for improper installation or use by the owner. The labor involved in the installation. Removal, or testing of a part is not warranted.Under no circumstance will the seller be held responsible for ... moredamages occured during shipping. It is the responsibility of the buyer to request insurance for the total sum value of the item when submitting payment. Otherwise the item will be shipped without insurance. If you do decide to ship with insurance it will be included for an additional charge.All items the weigh over 100lbs will be shipped via freight. Items will be secured tightly on a pallet. Tied down and stretch wrapped.For an exact shipping quote please contact us with your address and zip code. We guarantee after the purchase of the item that it will be shipped out within 1-2 business days but please allow 3-4 days for the freight shipment to take place. If the part is found to be defective. No refund or replacement will be issued until the item has been sent back at the buyers expense and received by us. After inspection of the item. If the part has been found to have failed under normal conditions, a replacement will be sent or if a replacement is not available a full refund will be issued. Returns: We do not guarantee that the quality of our product will meet your expectations. Photos of the actual part are provided. Customer is responsible for returning the product a
|
|
|
General Electric Tri Clad 10 HP Induction Motor 208-220/440V 3510 RPM - GE
General Electric 10 HP Tri Clad Induction Motor, Model 5K215AG1213A, 208-220/440 Volts 3 Phase, 28.4 Amps@ 208-220 Volts, 14.2 Amps@ 440 Volts, 215 Frame Size, 1-1/8" Shaft, Motor has been tested and runs well, Please contact us with any questions, Shipping Information Buyer is responsible for arranging shipping and for all costs associated with shipping. We are happy to work with you by providing weights and dimensions for determining your shipping cost. Use 60101 as the"Ship From" zip code. We will skid. Secure and load this item onto buyer arranged truck with our forklift. Local pickup is also available at our Addison. IL location. Motor weight is 237 lbs. add approximately 40 lbs for skid. Which will probably be about 30" x 30" for stability. We charge 8.25% sales tax for all items shipping within Illinois. Including ... morelocal pickups. Tax exemption is available if we are provided with a valid Illinois resale certificate.
|
|
|
DELTA INDUSTRIAL 10" TABLE SAW + FENCE 3 HP MOTOR 3450 RPM
Call Us Today! 626.330.4647| DELTA INDUSTRIAL 10" TABLE SAW + FENCE 3 HP MOTOR 3450 RPM, 45 DEGREE BLADE TILT DELTA FENCE 27" x 41" TABLE TABLE HEIGHT: 35" 115/230 VOLTS 1 PHASE 3.450 RPM 3 HP 24 FLA THERE IS NO MODEL NUMBER ON THIS SAW. BROKEN HAND WHEEL AS SHWON IN PHOTO MEASURES: 61" x 43" x 37" WEIGHT: 241 LBS Copyright 2014 1 Machinery Sales.com | All Rights Reserved, Descriptions Please read descriptions carefully. We list any features, specifications and details we know and/or research. If you don’t see the information you need or notice any discrepancy; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Payments We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying ... moreBidder Notification will be filed if payment has not been received. Item(s) will be relisted after few days and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. Storage We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. Feedback Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experience. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. Return Policy We accept returns for all our items listed as working. Items listed in“AS IS” condition or“For Parts or Repair” have no warranty. Read our descriptions carefully. We give 14 days to Contact Us and return the item. Refund
|
|
|
US 10 HP DC MOTOR 259 AT FRAME ARM 1150 RPM 500/300-150V
US EMERSON 10 HP DC MOTOR 259AT FRAME 500 VOLT ARM 1150 RPM 150/300V FIELD. MODEL 25900650002 MOTOR WEIGHT 420 LBS. MOTOR WAS RECENTLY REBUILT: CLEANED. VARNISHED ARMATURE, TURNDOWN/ UNDERCUT/ BALANCED ARMATURE. VARNISHED STATOR. NEW BEARINGS, NEW BRUSHES, AND TESTED*SET UP FOR BLOWER VENT, NO BLOWER! WILL SHIP FREIGHT TO LOWER 48 STATES ONLY SHIPPING DETAILS(CARRIER& COST) WILL BE DETERMINED AT AUCTIONS END WILL USE WINNING BIDDERS PREFERRED CARRIER THANK YOU FOR LOOKING AND PLEASE EMAIL ANY QUESTIONS
|
|
|
Magnetek AC Motor MOD 10-182759-01 HP 1.5 RPM 1140 V 200-230/460 PH 3
Magnetek Century AC Motor MOD: 10-182759-01 SER: B83-26 CAT: H767 VOLTS: 200-230/460 AMPS: 3.0/5.8-6.0 Hz: 60. TYPE: SC RPM: 1140 AMB: 60'C SF: 1.00 TIME: CONT. CODE: G ENCL: DP FR: M56Y FORM: KXX INSUL: B. PH: 3 DRIPPROOF VERTICAL SHAFT UP ONLY. Be sure to add me to your! And Check out my! By adding my eBay Store to your Favorites. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-148f6a29f5d-0x10b-
|
|
|
Magnetek / Century R315 AC Motor 10 HP 1750 RPM 200/208V - Excellent
I am selling a used Magnetek/ Century R315 AC Motor 10 HP 1750 RPM 200/208V in excellent condition as shown in the 5 pictures and described. NOTE: I give a 60 day warranty that all my motors run properly unless otherwise stated. Overnight shipping is available for most items. There would be an additional fee for overnight shipping. I do discount shipping if you combine purchases of my inventory. I will refund the difference on multiple purchases upon the completion of the sale. Thanks for looking…OC-2676/N1
|
|
|
Baldor Reliance EM3313T Super E Motor, 10 HP, 3Ph, 1770 RPM, Excellent
I am selling a used Baldor/Reliance 10HP Super E Motor as shown in the 4 pictures and described. NOTE: I give a 60 day warranty that all my motors run properly unless otherwise stated. Overnight shipping is available for most items. There would be an additional fee for overnight shipping. I do discount shipping if you combine purchases of my inventory. I will refund the difference on multiple purchases upon the completion of the sale. Thanks for looking.OC-2675/N1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1490d55975b-0x108-
|
|
|
Dayton Motor Model A3N072 HP 10 Frame 215T Class B RPM 1740
Dayton Motor Model A3N072 Hp 10 Frame 215T Please see photos for additional information. Save us as a seller& check out our store for more awesome items! Shipped fast. Tracked, and well protected. Please include postal code on any and all best offers. US Shipping defined as 48 Continental US States. No buyer"terms" will be recognized in any/all best offer listings. No Partial returns. All shipping prices firm unless discussed prior to purchase. All questions to be asked prior to purchase. Any special shipping instructions must be made prior to purchase. Combined shipping when available. No combined shipping on purhases less than $1.00. Shipping days include but not limited to recognized business days only. Any item listed as multiple venue may be cancelled at any time prior to completion. By placing bid or offer you accept these ... moreterms.
|
|
|
1/2 HP Electric Motor from 10" Fisch Midi Lathe Very Lightly Used 120V 1800 RPM
This is a smooth running Electric motor from a lightly used or not used 10" Fisch Midi Lathe. This lathe has a 1 1/4" gap between bed rails. I AM TRYING TO MEASURE AS BEST I CAN. I DON'T HAVE ANYTHING TO ACCURATELY MEASURE METRIC ITEMS. This is a 1/2 Horsepower Motor 120 Volt 6.6 Amp 60 HZ 1800 RPM single phase motor with on/off switch as pictured. The shaft is flat sided for@ 1 3/4"overall it is about 2 11/16" Long. The diameter is slightly less than 9/16" diameter I believe 13 MM. Rotates Clockwise(right Handed) at shaft end. Minor Wear and tear and dust and dirt but in Very Good working condition. Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. I Make Every effort to package each item and safe and secure as possible* ... moreI insure most items depending on method of shipment and fragility of the item. The USPS will occasionally damage or lose an item or.Break a box open and lose all or part of the contents.USPS requires that a buyer complete a damage report and bring the item to their local Post Office. It is faster to file a claim locally but if you prefer I can file it on-line if you send me pictures of the damaged box and items. i will file the claim when approved you can return the item and I will refund your money# Do NOT throw out the original box packing and contents! 14100. 1016
|
|
|
DAYTON 2M037A AC/ DC MOTOR 1/10 HP 115 VOLT 1.5A 8000 RPM
Fox Electronics“Honesty& Integrity = Longevity” Since 1984! Up for sale is the following: DAYTON 2M037A AC/ DC MOTOR 1/10 HP 115 VOLT 1.5A 8000 RPM Description/ Condition: Used in great working condition Additional items included: N/A, Warranty: Guaranteed non DOA and to function as described above Payment Terms: Payment is expected within 48 hours of auction close· Payment is expected immediately on all Buy It Now sales· PayPal only please· CA residents please add 9% sales tax Shipping& Handling Time: Item will be available for pickup asap when payment clears or two days after payment clears for shipping. In the event you require faster service please contact our sales department via email through our e b a y account to arrange this. All email must be sent through our e b a y account Thank you for showing an interest ... morein our items and good luck if you decide to bid. For our previous customers thank you for your continued support! Should you have any questions or concerns please feel free to contact our sales team through our e b a y account email! All emails will be addressed M-F 8:30am– 4:00pm. All emails received after these hours will be addressed the following business day! FOX ELECTRONICS 29150 Simms Ct. Hayward CA 94544 PH: 510.259.1804 FX: 510.259.1807
|
|
|
Magnetek Century 2 HP Electric Motor 1725 RPM Part 10-181257-01
This is a Magnetek Century AC Motor. Part 10-181257-01, 2 HP, 1725 RPM. It is used but was taken from a working system and is in very good condition. Please enlarge and examine photos closely for additional details. Any questions. Please ask. Thanks for looking. PA residents add 6% sales tax. Should you have any problems after receiving an item. Please contact us prior to leaving feedback so that we may have an opportunity to resolve any issue you may have.
|
|
|
Westinghouse 1/10 1/15 1/20 hp 115 Volts 1550 Rpm 3.5 1.7 1.4 Amps 1 Phase Motor
Westinghouse 1/10 1/15 1/20 hp 115 Volts 1550 Rpm 3.5 1.7 1.4 Amps 1 Phase 3 Speed Electric Motor. Palo Alto Electric Motor Corporation SINCE 1966 Description: This motor is used. The motor has some light wear on the casing but has been tested and is in working order. Specifications: Model# E322P116 HP- 1/10-1/15-1/20 Capacitor- 4/370 Volts- 115 RPM- 1550 Phase- 1 AMP- 3.5-1.7-1.4 If you have any questions or concerns please contact our office at 650-493-5585 Fax 650-493-5544 Office Hours 8:00am 4:30pm Monday- Friday Pacific Standard Time More Info at Warranty: By bidding on this item you are agreeing with the following terms: Under no circumstance will the seller be held responsible for improper installation or use by the owner. The labor involved in the installation. Removal, or testing of a part is not warranted. Under no circumstance ... morewill the seller be held responsible for damages occurred during shipping. It is the responsibility of the buyer to request insurance for the total sum value of the item when submitting payment. Otherwise the item will be shipped without insurance. If you do decide to ship with insurance it will be included for an additional charge. All items that weigh over 100lbs will be shipped via freight. Items will be secured tightly on a pallet. Tied down and stretch wrapped. For an exact shipping quote please contact us with your address and zip code. We guarantee after the purchase of the item that it will be shipped out within 1-2 business days but please allow 3-4 days for the freight shipment to take place. If the part is found to be defective. No refund or replacement will be issued until the item has been sent back at the buyers expense and received by us. After inspection of the item. If the part has been found to have failed under normal conditions, a replacement will be sent or if a replacement is not available a full refund will be issued. Returns: We do not guarantee that the quality of our product will meet your expectations. Photos of the actual part are provided. Customer
|
|
|
LINCOLN TEFC AC MOTOR 215T 10HP 10 HP 230/460V 3PH 3500 RPM 1 3/8" SHAFT
LINCOLN AC MOTOR CAT. NO. 215T 10 HP 3500 RPM TEFC 3 PHASE 230/460V 1 3/8" APPROXIMATE SHAFT DIAMETER FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE THE ABOVE PHOTOS FOR ADDITIONAL INFORMATION ON ITEM. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next ... morehighest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept P
|
|
|
A.O. Smith 1/10.1/12.1/15 hp 1625 Rpm 115 Volts 1.5/1.1/0.8 Amps Electric Motor
A.O. Smith 1/10.1/12.1/15 hp 1625 Rpm 115 Volts 1.5/1.1/0.8 Amps Electric Motor. Palo Alto Electric Motor Corporation SINCE 1966 Description: This motor is used. The motor has some light wear on the casing but has been tested and is in working order. Specifications: Model# 322P497 HP-1/10.1/12.1/15 Volts- 115 RPM- 1625 Phase- 1 AMP- 1.5/1.1/0.8 Capacitor- 5/370 Frame- BT-42 If you have any questions or concerns please contact our office at 650-493-5585 Fax 650-493-5544 Office Hours 8:00am 4:30pm Monday- Friday Pacific Standard Time More Info at Warranty: By bidding on this item you are agreeing with the following terms: Under no circumstance will the seller be held responsible for improper installation or use by the owner. The labor involved in the installation. Removal, or testing of a part is not warranted. Under no circumstance will the ... moreseller be held responsible for damages occurred during shipping. It is the responsibility of the buyer to request insurance for the total sum value of the item when submitting payment. Otherwise the item will be shipped without insurance. If you do decide to ship with insurance it will be included for an additional charge. All items that weigh over 100lbs will be shipped via freight. Items will be secured tightly on a pallet. Tied down and stretch wrapped. For an exact shipping quote please contact us with your address and zip code. We guarantee after the purchase of the item that it will be shipped out within 1-2 business days but please allow 3-4 days for the freight shipment to take place. If the part is found to be defective. No refund or replacement will be issued until the item has been sent back at the buyers expense and received by us. After inspection of the item. If the part has been found to have failed under normal conditions, a replacement will be sent or if a replacement is not available a full refund will be issued. Returns: We do not guarantee that the quality of our product will meet your expectations. Photos of the actual part are provided. Customer is res
|
|
|
RELIANCE 10 HP RPM III DC MOTOR, FRAME: MC2113ATZ, RPM 1750, 240V, USED
RELIANCE RPM III DC MOTOR. 10 HP. FRAME: MC2113ATZ. RPM 1750. 240 VOLTS. USED. APPROX SHIPPING WEIGHT: 409 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RELIANCE 1KA592635-PW RPM III D-C MOTOR, 10 HP, RPM 1750, 240V, USED
RELIANCE RPM III D-C MOTOR. ID# 1KA592635-PW 10 HP. RPM 1750. 240 VOLTS. FRAME: MC2113ATZ. USED. APPROX SHIPPING WEIGHT: 428 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-149770af3e8-0x112-
|
|
|
RELIANCE RPM III D-C MOTOR, FR: MC2113ATZ, 10 HP, 1750 RPM, 240 VOLTS, USED
RELIANCE RPM III D-C MOTOR. FRAME: MC2113ATZ. 10 HP. 1750 RPM. 240 VOLTS. USED. APPROX SHIPPING WEIGHT: 420 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RELIANCE RPM III DC MOTOR, VOLTS 240, 10 HP, RPM 1750, FR MC2113ATZ, USED
RELIANCE RPM III DC MOTOR. VOLTS 240. 10 HP. RPM 1750. FRAME: MC2113ATZ. USED. APPROX SHIPPING WEIGHT: 406 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LEESON DC Permanent Magnet Motor 1750 RPM; 1 HP; 10 AMP; C4D17FK5F
GOOD USED LEESON DC MOTOR Motor was used for outbuilding potable water system. Stainless Pump and Press relief Valve being sold in separate auctions! DC MOTOR PLACARD READS. Manufacturer- Lesson Model- C42D17FK5F RPM- 1750 HP- 1 Volts- 90 volt dc Amp- 10 Duty- Cont. Frame- ZS56C Tork 36.0 in. LBS. Encl. TEFC
|
|
|
Baldor 37B05X58G1 3450 rpm AC Motor 10 HP 3PH 3450 RPM 208-230/460V
baldor_37b05x58g1_3450_rpm_ac_motor Baldor 37B05X58G1 3450 rpm AC Motor Specifications: Spec: 37B05X58G1 Enclosure: ODTF. Open Drip Proof Tandem Fan HP: 10 Volts: 208-230/460 Amps: 27-25/12.5 RPM: 3450 Frame: 213TC Hz: 60 PH: 3 Rating: 40C AMB-CONT Specifications: Spec: 35L307-180 Enclosure: TEFC. Totally enclosed HP: 1 Volts: 115/230 Amps: 11/5.5 RPM: 3450 Frame: 56CZ Hz: 60 PH: 1 Rating: 40C AMB-15 Min NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 365676, Manufacturer: Baldor, Model Number: 37B05X58G1, Description: 3450 rpm AC Motor, Made in: United States, Weight: 98Lbs, Condition: In use when removed, Cosmetic: Very Good, 208-230/460 Volts 27-25/12.5 Amps 1 Phases 60 Hz Have questions regarding this product? Contact us: ebay@megawavz.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise ... moretheir bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless discussed with the billing party. In the case that payment has not been received within 7 working days. Groupe Interconnexion reserves the right to open an unpaid auction request.Unless otherwise notified) All Items are subject to a Packing and Handling Fee of 3% 15$ Minimum) Canadian residents should expect Provincial/Federal taxes to be applied. IMPORTANT: Read our shipping instructions allocated to your region; Canada. USA or International. Alternative buyer's shipping account are also welcome CANADA: A Minimum Shipping Charge of $20.00usd will be applied to all auctions. Higher rates will apply in northern Canada) Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight.
|
|
|
HOWARD IND. UNIVERSAL MOTOR, 1/2 HP, 115 V, 10,500 RPM, FR BF33B0N, USED
HOWARD IND. UNIVERSAL MOTOR. 1/2 HP. 115 VOLTS. 10.500 RPM. FR BF33B0N. 5.5 AMPS. CYC. DC/60. 7841385001. USED. APPROX SHIPPING WEIGHT: 22 LBS. Z-4-4. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
General Electric 10 HP Electric Motor, 1175 RPM, 265T Frame
WE SHIP WORLDWIDE* ITEM NAME MODEL# DESCRIPTION CONDITION: STOCK# General Electric 10 HP 1175rpm. 3 phase, 60hz, 460v, 12.9amps, 1.15 service factor, 256T frame, KS type, TEFC Good Used 51042 THIS SALE IS FOR ONE GOOD USED ELECTRIC MOTOR. ELECTRICALLY E-O.K. GUARANTEED. For More Information Please Call Drew at 719-754-1981 Power Zone Equipment. Inc. Specializes In: Pumps- Mud Pumps. Water Injection, Salt Water Disposal, Pipeline, Water Transfer Pumps- Piston. Plunger, Centrifugal, Rotary Positive. New, Used, Reconditioned Pump Packages- Diesel. Natural Gas, Electric Drive. New or Reconditioned Engines- Ajax. Arrow, Fairbanks-Morse, Witte, Caterpillar, Waukesha, Superior, Detroit, Cummins, Deutz Compressors. Blowers, Fans, Electric Motors, Gear Reducers Pipe- Line Pipe. Casing, Production Tubing Responsive Service. Prompt Deliveries WE SHIP ... moreWORLDWIDE We are always looking to purchase new or used surplus equipment.
|
|
|
Induction Motor, Reliance, 10 Hp, 1475/2950 Rpm, 460 Volts, Frame L215S
Induction Motor. Mfr: Reliance Electric. Hp: 10. Rpm: 1475/2950. Volts: 460. Amps: 13.9/12.6. Frame: L215S. Enclosure: TEAO-BC. Cont. Duty. Hz: 50/100. Phase: 3. Service Factor: 1.15. Item#41010. Weight is approx. I will provide an exact weight upon shipping `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-149b6e1d041-0x112-
|
|
|
Light Rail 3.5 Intelli-Drive 10 rpm (Motor Only) Mover HPS MH Hydroponics
You are bidding on used and tested Light Rail 3.5 Intelli-Drive 10RPM Motor Grow Light Mover. What you see in the picture(s) is exactly what you will receive unless other wise stated. This item(s) is or/are used. But are in perfectly good working condition. It may have signs of wear and are/is sold in as is condition. You responsible for checking the exact fitment for/to your specific application. Please make sure you read through our listing before purchasing and that you fully understand what you are bidding on. Please leave your 5 star feedback rating as well. As it is needed because we are a newer company trying to start up and we strive to have a good reputation for quality. All while trying to provide the highest quality service and products at fair prices for all our customers. Also, we cannot stress this enough, but if you do have ... moreany issues, problems,questions, or concerns please contact us first rather than communicating through feedback…We can't help you if you don't contact us, and we pride ourselves on being easy to work with. We are here to help! We sometimes use boxes that were for other products, so be aware that your item might arrive in a box you were not expecting. PurchasingTerms: Please only serious buyers and bidders. Payments needs to be made within 3 business days or item will be re-listed. Great care will go into packaging your item and will insure at no extra cost to you for orders over $100. No return's on electrical items. Notes Parts are items"as-is" All parts are inspected and only sold if in good working condition. We work hard to make sure only quality items leave our warehouse. We are a new company and need your feedback! We aim for satisfaction in every transaction. So please contact us if there is a problem before leaving feedback and we'll make it right. For more detailed images or any questions please message or call us@1-321-961-3812. Shipping is for lower 48 states only…All others must contact us first for a quote before purchasing. The item will sh
|
|
|
LEESON MOTOR 10 HP 3600 RPM 215TC FRAME 208-230/460 VOLTAGE TEFC WITH FEET
LEESON MOTOR 10 HP 3600 RPM 215TC FRAME 208-230/460 VOLTAGE TEFC WITH FEET BUYER PAYS FREIGHT/SHIPPING. SUBJECT TO PRIOR SALE. RECORD NO. 82283
|
|
|
RELIANCE MOTOR 10 HP 3600 RPM 215T FRAME 230/460 VOLTAGE TEFC
RELIANCE MOTOR 10 HP 3600 RPM 215T FRAME 230/460 VOLTAGE TEFC BUYER PAYS FREIGHT/SHIPPING. SUBJECT TO PRIOR SALE. RECORD NO. 81135
|
|
|
US MOTORS MOTOR 10 HP 3600 RPM 215TC FRAME 208-230/460 VOLTAGE TEFC WITH FEET
US MOTORS MOTOR 10 HP 3600 RPM MOTOR 215TC FRAME 208-230/460 VOLTAGE TEFC WITH FEET Description US MOTORS MOTOR TEFC 10 HP 3600 RPM VOLTAGE 208-230/460 215TC FRAME WITH FEET BUYER PAYS FREIGHT/SHIPPING. SUBJECT TO PRIOR SALE. VEC REFERENCE NUMBER: 82284 Contact Information Valley Equipment Company. Inc. 3903 West Market Street Johnson City. TN 37604 Hours: Phone: Fax: Mon-Fri 8am- 5pm EST(423) 753-3541 or(800) 832-3541(423) 753-3589 Seller warrants that it is the true and lawful owner of the equipment. That the same is free from all encumberances, and that seller has a lawful right to sell same. SELLER MAKES NO REPRESENTATION OR WARRANTY THAT THE EQUIPMENT IS MERCHANTABLE OR THAT IT IS FIT FOR A PARTICULAR PURPOSE. Except as here stated all warranties, express or implied, are excluded. Seller shall not be liable to purchaser, or any other ... moreperson, for an indirect or inconsequential damage arising out of sale or use of the equipment. Buyer has inspected the equipment, or waived such inspection, and is satisfied with the condition thereof. Buyer assumes all risk and agrees to indemnify and hold harmless the seller against all claims and liability arising out of any condition, property or use of the equipment whether or not the claims and liability are for negligence of seller.
|
|
|
1/10 HP Electric Motor delco 1725 Rpm 115 Single Phase 5/16" shaft Vintage Used
this vintage delco appliance division 1/10 th hp motor runs very smooth and quiet the mount is included and the measurements are 5 1/2 high 5 wide and 8 deep this motor is 60 cycles and is 2.1 amps 115 volt 1725 rpm the cord will need replaced any questions please feel free to ask thanks.
|
|
|
Light Rail 3.5 Intelli-Drive 10 rpm (Motor Only) Mover - Free Shipping!
Light Rail 3.5 Intelli-Drive 10 rpm(Motor Only) Mover Has Adjustable Reverse Delay Knob Good Condition and Works Great! Free Shipping! Thanks for Looking& Bidding! We have been an eBayer for over 15 years with a 100% rating. We always do our best to describe our items accurately and that they work as described. Your complete satisfaction is our number one goal- just check our feedback.
|
|
|
KOEHLER FE-10 Centrifugal Blower & Single Phase 1 HP 3450 RPM MOTOR 115 230 VAC
This auction is for a KOEHLER model FE-10 centrifugal blower with a 1 HP General Electric industrial motor. Both fan and motor have been reconditioned and are in excellent condition. Both the fan and motor were completely dissembled. Bead blasted, inspected, new bearings installed, repainted, resembled and tested. The fan is 10-1/2" Intake 6" Exhaust 4-1/2" GE single phase 1 hp 3450 rpm 115/230 vac 60 Hz 13.4- 6.7 amp Email me with any questions before bidding or send your zip code for a more accurate shipping quote because the ebay shipping calculator is often wrong. Check out my!
|
|
|
WESTINGHOUSE 10 HP MOTOR, RPM 1755, V 230/460, CAT# EP0104, USED
WESTINGHOUSE 10 HP MOTOR. RPM 1755. VOLTS 230/460. 3 PHASE. CAT# EP0104. SHAFT# 3" X 1 3/8" USED. APPROX SHIPPING WEIGHT: 270 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WESTINGHOUSE 10 HP MOTOR, 460 VOLTS, RPM 1800, USED
WESTINGHOUSE 10 HP MOTOR. 460 VOLTS. RPM 1800. USED. APPROX SHIPPING WEIGHT: 275 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MAGNETEK ENERGY EFFICIENT 10 HP MOTOR, RPM 3455, FR F215, CAT# N343, USED
MAGNETEK ENERGY EFFICIENT MOTOR. 10 HP. RPM 3455. FRAME F215. CAT# N343. 2VZ 132M2. 3 PHASE. USED. APPROX SHIPPING WEIGHT: 241 LBS ON SKID. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Reliance Electric 10 HP AC Motor, # P21S3027 KK, 1755 RPM, Fr: 215T, 230/460V
Title: Reliance Electric 10 HP AC Motor. P21S3027 KK, 1755 RPM, Fr: 215T, 230/460V Description: Our Internal Stock# 5-C2-3(12-1-14 dale) You are about to purchase the following item: 1- Reliance Electric 10 HP AC Motor. P21S3027 KK, 1755 RPM, Fr: 215T, 230/460V Ident No. P21S3027 KK 10 HP 1755 RPM 208-230/460 V 27.9-25.2/12.6 Amp 60 Hz 3 Phase Code H Frame- 215T Type P Shaft Dia: 1-3/8" Weight: 155 Lbs. W/ Skid 180 Lbs. Made in USA This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ ... more$ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and c
|
|
|
BALDOR Motor 10 hp frame 215T 1760 rpm 230/460 volts 3 ph
Office: 830-775-2580 Our Asset# KSCU/ 44 Qty available: 1 BALDOR Motor 10 hp frame 215T 1760 rpm 230/460 volts 3 ph Gallery Photo Appraised Value FOB our location: $495.00 Price With Free Shipping to lower 48 States: $595.00 Note: All free shipping is quoted to BUSINESSES WITH DOCKS. FORKLIFTS OR FOR PICKUP OR AT LOCAL TERMINAL If there is no price above please contact us for shipping quote as shipping prices vary greatly on freight items. NEW REPLACEMENT COST OR WHEN NEW: Click here to view our profile: Manufactures Tag: CAT N3714T Manufacturer: BALDOR Model: N/A Serial# N/A Year: HP/Amp/KW/KVA: Voltage: Phase: Other Info: General Photos: Background Our attempt to answer buyer questions in advance or to give a little history as represented to us. We are not making any representations simply passing along 3rd party info. Inspections are our ... morefindings only and not representation of fitness for a purpose 3. Refurbished: See ad for details Inspection 1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H. We do not refund for freight damage items but will assist buyers with documents for freight claims. Factory Information* King Surplus is not making any representations. Warranty of merchantability or any implied warranty of fitness for a particular purpose. For reference only: We offer Assistance Shipping& Packaging Worldwide as follows: 1. All shipping is quoted to BUSINESSES WITH DOCKS. FORKLIFTS OR FOR PICKUP OR AT LOCAL TERMINAL. 2. All PayPal payments require us to ship to address shown on PayPal and not on your account. Please make sure you add the correct delivery address to your PayPal account. 3. RESIDENTIAL& LIGHT COMMERCIAL ITEMS: Residential delivery for items under 70 lbs that can be shipped via USPS. UPS or FedEx will require additional services averaging about 10 dollars to deliver. Palletized freight items, bulky items or items that weigh more than USPS, UPS or FedEx will take, must go freight. 4. ACCESSORIAL FEES: Delivery to non-commercial areas. I.e. farms, business&#
|
|
|
10 inch direct drive table saw motor 1.5 HP 4800 RPM tilt and height adjustable
What is up for bid is a used table saw motor and mounting assembly. The motor works good and the spec says it is 1.5 HP and 4800 RPM. If you look at the one pic of the base it says Collins company made the saw. You also will be getting the mount. That will allow the blade to move up and down. Also motor will angle. Pivot to cut at an angle. I will also give you the clamps for the rod that allows it to pivot for the angle cut. The blade up and down adjustment knob is missing. May have to get another. What you are buying is in the first few pics. The last two are there for your information as to what it come off of. What had happened to the saw is something dropped on the top and broke the aluminum top. This would be a great motor to repair your worn out one or top make a project out of it. All items sold as is no warranty. Buyer pays shipping. ... moreHappy Bidding!
|
|
|
Magnetek Century E-Plus AC Motor Cat No. E301 ~10 HP ~ 1750 RPM ~ 230/460V
Magnetek Century E-Plus AC Motor Cat No. E301 Part: 7-355804-01-OJ 10 HP Frame: S215T Duty: CONT 1750 RPM 230/460V 60 Hz ~ 3 Phase Amps: 24.4 Shipping Weight is 115 pounds Standard Skid Other Forms of Payment Accepted: Money Order Bank Checks Wire Transfer Business/Personal Checks*Payment for item and shipping costs must clear prior to shipping item. This item can be picked up in Plainville. CT 06062 or we can arrange for a freight quote. We will also ship with your preferred shipper. We will load the item free of charge. TRIPS INDUSTRIAL SURPLUS makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any ... moreinjuries or damages. Whether incidental or consequential, associated in any way with the item(s) The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer. 3405Kon#4.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14a3621a138-0x110-
|
|
|
MAGNETEK 10 HP ENERGY EFFICIENT MOTOR, FR F215JM, RPM 3455, V 230/460, USED
MAGNETEK 10 HP ENERGY EFFICIENT MOTOR FRAME F215JM RPM 3455 VOLTS 230/460 PART# 9-391192-60 3 PHASE 2VZ 132M2 USED APPROX SHIP WEIGHT: 245 LBS ON SKID SKID TK/JH THIS ITEM IS GUARENTEED TO WORK. IF ITEM DOES NOT WORK WE HONOR THE 14 DAY RETURN POLICY. INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCES FOR ITEMS PURCHASED IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BALDOR GEAR REDUCTION VM3534 230/725 RPM 1/3 HP CONVEYOR MOTOR 10:1 GEARBOX
BALDOR VM3534 230/460 V 1725 RPM 1/3 HP CONVEYOR MOTOR& BOSTON 10:1 RATIO GEARBOX GOOD USED CONDITION PLEASE READ VERY IMPORTANT! I DO COMBINE SHIPPING FOR MULTIPLE PURCHASES. Greyhound is always an option to lower shipping costs on larger items! Contact me with city& zip code. PLEASE DO NOT LEAVE NEGATIVE FEEDBACK. RATINGS, OR OPEN A DISPUTE WITHOUT CONTACTING ME FOR A RESOLUTION! Customer satisfaction and feedback is very important! We strive to receive five star ratings in all categories! If for any reason you are not 100% satisfied with your purchase PLEASE contact us for a resolution! I describe items to the best of my knowledge! Errors can be made or something overlooked! Things can get destroyed during shipping! Insurance is not normally included in shipping prices! If you wish to have shipping insurance please contact me before ... morethe purchase! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14a371672d9-0x111-
|
|
|
10 Hp 215T Baldor Electric Motor 3500 RPM
This motor is in great condition and ready to be put to use. What this motor has to offer can all be seen on the metal plate in the picture.
|
|
|
Brook Crompton 10 HP AC Motor Part No. 2424111C-04 ~ 3485 RPM ~ 460 V ~ TEFC
Brook Crompton 10 HP AC Motor Part No. 2424111C-04 ~ 3485 RPM ~ 460 V ~ TEFC 213 TD Frame Shipping Weight is 150 pounds Standard Skid Other Forms of Payment Accepted: Money Order Bank Checks Wire Transfer Business/Personal Checks*Payment for item and shipping costs must clear prior to shipping item. This item can be picked up in Plainville. CT 06062 or we can arrange for a freight quote. We will also ship with your preferred shipper. We will load the item free of charge. TRIPS INDUSTRIAL SURPLUS makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, ... moreassociated in any way with the item(s) The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer. 3407Kon#4
|
|
|
Used Reliance DC Motor B2510ATZ 10 H.P, 1750 RPM, 500 V Arm, 300 Fld V
Used Reliance DC Motor B2510ATZ 10 H.P. 1750 RPM, 500 V Arm, 300 Fld V Used Reliance Electric DC Motor B2510ATZ 10 H.P. 1750/2300 RPM 500 Volt Armature 300 Field Volts 16.80 Amps Amb. 40°C 90 Day Guarantee FOB Hamilton. Ohio 45011 International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. T hese charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional charges will be prior to bidding or buying. Location- PRIMSA KLL Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and normal parcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote ... moreplease contact us at the number above. All products are professionally packaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is not received within 7 Days we must begin an Unpaid Item Dispute. All return policies details are covered in each listing. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates
|
|
|
US ELECTRIC 10 HP MOTOR, 460V, 1725 RPM, W/ DINGS DYNAMICS R72035 BRAKE, USED
US ELECTRIC MOTOR 10 HP 460 VOLTS 1725 RPM 3 PHASE FRAME 215T SHAFT: 3 1/4" X 1 3/8" WITH DINGS DYNAMICS BRAKE MODEL# R72035 USED APPROX SHIPPING WEIGHT: 307 LBS ON SKID SKID TK INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|