|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States You also have to run a lead to each individual motor driver. without daisy chaining as directly specified by Gecko and all stepper manufacturers.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Compatible motor: stepper motor. Input reverse polarity protection: Yes. It can save and set distance/speed/delay/number of cycles when power off. It ... morecan run independently as a module, or it can be used together with other systems.
Buy It Now
Free Shipping Condition: New Location: United States Usually it costs about 30USD-50USD.
Buy It Now
$3.00 Shipping Condition: New Location: China Usually it cost about 35USD-50USD.
Buy It Now
Free Shipping Condition: New Location: Oakland, United States Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, whats more, the positioning accuracy is also ... morehigher. Prohibition of combustible gases and conductive dust.
Buy It Now
$12.94 Shipping Condition: New Location: HORNCHURCH, United Kingdom L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
Free Shipping Condition: New Location: China On the operation interface, rotate the encoder to adjust the speed, CW key -- forward rotation, CCW key -- reverse rotation, RUN/STOP key -- operation ... morestop exit.
Buy It Now
Free Shipping Condition: Used Location: Malaysia It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. 16 selectable microstep resolutions including ... more400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000,5000, 8000, 10000, 20000, 40000.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM542A · 8 channels output phase current setting.
Buy It Now
Free Shipping Condition: New Location: United States
Buy It Now
Free Shipping Condition: New Location: United States The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. The DRV8825 features adjustable ... morecurrent limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step).
Buy It Now
$9.00 Shipping Condition: New Location: Carpinteria, United States What you see is what you get. OUR GOAL IS TO GIVE YOU A GREAT ITEM AT A GREAT PRICE.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States welcome to our shop! Description DC 10-35V TB6560 3A Stepper motor driver Stepper motor driver board Single-axis controller 10 stalls(C6A1) 1400294 This ... moremodule does not have any protection circuit. When you use must be very careful, Otherwise, the chip can easily burn. Features: 1. Current level-by-adjustable 2. The automatic semi-flow adjustable. 3. The use of high-speed optocoupler 6N137 4. plate printed setup instructions 5. good heat dissipation. Working Voltage：DC 10V-35V(DC24V switching power supply is recommended) 6N137 high-speed optical coupling TB6560AHQ chip(build in low-pressure shut-off. Overheating stopping and overcurrent protection circuit) Rated maximum output: ± 3A. Peak 3.5A. Suitable for 42. 57 stepper， Not suitable for 3A stepper motor. Automatic semi-flow Function. Subdivision: full step. Half step, step 1/8, 1/16-step, up to 16 segments. Volume: 50* length 75 width* height 35(MM) packing including: 1x 3A Stepper motor driver Payment We only accept payments via paypal. All payments must be prepaid. No Cash and COD payment. We will ship the item to the address on your paypal payment notice. Please confirm your shipping address in the PayPal Account. If you have any problem about payment. Please contact us. Delivery details Item will be shipped within 3 working days after full payment is received. We ship worldwide with flat rate shipping by post Air mail. The shipment usually takes 15-45 business days. We can also provide express post by EMS(5-8 days) or UPS(4-5 days) The cost is higher than standard postage. Extra shipping fees is needed. if you need express post please contact us! About us We will leave positive feedback to buyer as soon as buyer pays for the item.Your satisfaction is our first priority. Please leave us positive feedback upon satisfaction of the item. Please email us before leaving negative and neutral feedback. We will try our best to solve the issue. We will leave positive feedback to buyer as soon as buyer pays for the item. Contact us we do try respond
Buy It Now
Free Shipping Condition: New Location: United States 1PC DQ860HA with 7.8A peak current ,24-80VDC ,256 Microstep. It is designed for use with 2-phase hybrid stepper motor of all kinds with. 8.0A phase current. ... moreHording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: China 1PC DRIVER DQ2522MA Stepper Motor Driver 0.5A-5.0A 0.5-7A peal. Stepper Motor Driver Our Stepper Motors are used on small to mid-sized CNC mills or milling ... moremachines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Item Type: Stepper Motor Driver Board. Application: Stepper Motor, DC Motor. Feature: 1. Adjustable Speed Range: 0.1-999 rpm.
Buy It Now
$3.00 Shipping Condition: New Location: China Description Make your own Arduino motor party with a motor shield and a fine assortment of motors! The original L293D Motorshield kit is one of our most ... morebeloved kits. We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Instead of a L293D darlington driver. We now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well. Instead of using a latch and the Arduino's PWM pins. We have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins(SDA& SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project. Tested compatible with Arduino UNO. Leonardo, ADK/Mega R3, Due, Diecimila& Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers. Package Included: 1 x Motor/Stepper/Servo/Robot Shield for Arduino I2C v2 Kit w/ PWM Driver TOP Recommended Products $7.12 Time left: 8d 4h 52m. $2.09 Time left: 27d 5h 23m. $2.91 Time left: 19d 10h 43m. $1.62 Time left: 8d 6h 29m. $1.31 Time left: 18d 8h 51m. $9.13 Time left: 1d 8h 5m. $17.98 Time left: 2d 8h 1m. $1.41 Time left: 8d 8h 31m. $7.61 Time left: 9d 6h 53m. $5.93 Time left: 27d 6h 28m. $3.26 Time left: 19d 12h 27m. $1.37 Time left: 16d 13h 7m. $4.58 Time left: 28d 2h 6m. $10.87 Time left: 21d 7h 5m. $3.64 Time left: 18d 13h 22m. $5.48 Time left: 23d 12h 44m. $4.64 Time left: 18d 7h 30m. $11.16 Time left: 20d 8h 1
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States An actual built in EMI filter covered in the video below for the cleanest possible power output to provide your CNC robot with. That being said most switching ... morepower supplies simply feature a toroid passive noise filter which doesn't provide as efficient EMI mitigation as an actual EMI noise filter.
Buy It Now
Free Shipping Condition: New Location: China Application: Stepper Motor, DC Motor. Feature: 1. Adjustable Speed Range: 0.1~999 rpm.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: United States Usually it costs about 30USD-50USD.
Buy It Now
$4.00 Shipping Condition: New Location: China Usually it cost about 35USD-50USD.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: New Location: United States Application: Stepper Motor, DC Motor. Feature: 1. Adjustable Speed Range: 0.1~999 rpm. If you do not receive our reply within 48 hours, pls. If you are ... moresatisfied with our service, pls.
Buy It Now
Free Shipping Condition: New Location: China Dual Y axis interface, can drive 2A 4 phase 2 wire stepper motor. Support Stepper Motor: Motor within 2A 2-phase 4-wire. 1X USB 2 Axis Stepper Motor Driver ... moreBoard. Fit for DIY desktop laser engraver, dispensing machines printer, plotter.
Buy It Now
$3.20 Shipping Condition: New Location: China The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened. This stepper motor driver lets ... moreyou to operate bipolar stepper motors in full-, half-, quarter-, eighth-.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States The Warp9 Ethernet Smooth Stepper (Turnkey System) - YouTube. 1-10ft Double Shielded CAT7 Ethernet Cable With Gold Plated Connectors For.
Buy It Now
Free Shipping Condition: Used Location: Dorchester Center, United States CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board, Photo: Description: Features: Working voltage DC 10V-35V. Recommended ... moreto use a switching power supply DC24V power supply. 6N137 high-speed optical coupling. Guarantee high speed without losing step. using the Toshiba TB6560AHQ new original chip with low voltage shutdown. Overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A. Peak 3.5A. for two-phase within 42.57 stepping 3A/ four-phase/ of line four/ six-wire stepper motor, and is not suitable for more than 3A stepper motor. automatic half current function. subdivision: whole step. Half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions. Dimensions: width 50* 75* long high-35(MM) Features similar products: 1. Current grade-by-adjustable to meet your demand for a variety of applications. 2. Semi-automatic flow adjustable. 3 6N137 high-speed optical coupling. Guarantee high speed without losing step. 4. Plate printed setup instructions operation without manual also. 5. Thick teeth radiator, good heat dissipation. Absolutely use Toshiba TB6560AHQ. New original chip, a penalty at ten! Package Contents 100% Brand New 1x TB6560 3A driver board, Shipping: We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! Ship by Post Air-mail within 1 working days after full payment is received. The shipment usually takes 12-35 business days to Worldwide. We also provide international Expressed delivery such as EMS. DHL and UPS,extra shipping fees is needed. The shipping time may vary. Depends on receiver's location. Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-22 25 Working Days + Saturday + Sunday 5-9 10-14 15-20 21
Buy It Now
Free Shipping Condition: New Location: United States Model: TB6600. It is an updated version of TB6600 4A stepper motor driver. Feature: 1. Original stepper motor driver chip, the current is selected by ... moreDIP switch. Item Type: Stepper Motor Driver. Powerful anti-high frequency interference ability, and overheating, overcurrent, short circuit protection.
Buy It Now
Free Shipping Condition: Used Location: Malaysia Oriental Motor. 5-phase microstep driver. DEPENDS ON PRODUCT WEIGHT.
Buy It Now
$3.00 Shipping Condition: New Location: China Dual DC Stepper Motor Drive Controller Board Module TB6612FNG Replace L298N Description: Description: The TB6612FNG motor driver can control up to two ... moreDC motors at a constant current of 1.2A(3.2A peak) Two input signals(IN1 and IN2) can be used to control the motor in one of four function modes- CW. CCW, short-brake, and stop. The two motor outputs(A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU. Logic supply voltage(VCC) can be in the range of 2.7-5.5VDC. While the motor supply(VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel(or up to 3.2A for a short. Single pulse) Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Features: Power supply voltage: VM=15V max. VCC=2.7-5.5V•Output current: Iout=1.2A(average) 3.2A(peak) Standby control to save power•CW/CCW/short brake/stop motor control modes•Built-in thermal shutdown circuit and low voltage detecting circuit•All pins of the TB6612FNG broken out to 0.1" spaced pins•Filtering capacitors on both supply lines Feedback: We will leave 5 Star psitive Feedback after receiving the payment.5 Star Feedback is our life. Please help do not leave a neutral or negative feedback and Low score. Please do contact us to get a better solution! Your understanding will be appriciated! We believe all the problems can be solved if buyer works with us I am a honest seller. Please 100% trust! Your sasifation is our final goal! Our best service will let you 100% satisfy! Hope also to receive your 5 star positive feedback! Note: The economy shipping will be no tracking number. Only have the recording number to prove it sent If you need the track
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States 1-3D Printed Ethernet Smooth Stepper Enclosure With Tool Less Mounting Hardware. This system includes the following components.
Buy It Now
Free Shipping Condition: New Location: United States Usually it cost about 35USD-50USD.
Buy It Now
Free Shipping Condition: New Location: Chicago, United States Programmable maximum number of rows: 99;. Program editing functions: You can insert, delete, modify the program. Signal input: 6 (optical isolation);. ... moreSignal output: 3 (optical isolation);. Lifting speed curve: 2 (optimization);.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States They were designed in house to be used with these drives for optimal performance. Gecko's 3 year direct support US warranty. VAMPIRE Pro Grade Digital ... moreStepper drivers (These are the latest REV 7 2019 edition), and custom made aluminum heatsink.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Stepper Motor Driver is a board for DRV8825 microstepping stepper motor driver. 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink ... morefor 3D Printer. - DRV8825 driver board is widely used in 3D printers and small CNC machines.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States welcome to our shop! Description DC 10-35V TB6560 3A Stepper motor driver Stepper motor driver board Single-axis controller 10 stalls(C6A1) 1400294 This ... moremodule does not have any protection circuit. When you use must be very careful, Otherwise, the chip can easily burn. Features: 1. Current level-by-adjustable 2. The automatic semi-flow adjustable. 3. The use of high-speed optocoupler 6N137 4. plate printed setup instructions 5. good heat dissipation. Working Voltage：DC 10V-35V(DC24V switching power supply is recommended) 6N137 high-speed optical coupling TB6560AHQ chip(build in low-pressure shut-off. Overheating stopping and overcurrent protection circuit) Rated maximum output: ± 3A. Peak 3.5A. Suitable for 42. 57 stepper， Not suitable for 3A stepper motor. Automatic semi-flow Function. Subdivision: full step. Half step, step 1/8, 1/16-step, up to 16 segments. Volume: 50* length 75 width* height 35(MM) packing including: 1x 3A Stepper motor driver Payment We only accept payments via paypal. All payments must be prepaid. No Cash and COD payment. We will ship the item to the address on your paypal payment notice. Please confirm your shipping address in the PayPal Account. If you have any problem about payment. Please contact us. Delivery details Item will be shipped within 3 working days after full payment is received. We ship worldwide with flat rate shipping by post Air mail. The shipment usually takes 15-45 business days. We can also provide express post by EMS(5-8 days) or UPS(4-5 days) The cost is higher than standard postage. Extra shipping fees is needed. if you need express post please contact us! About us We will leave positive feedback to buyer as soon as buyer pays for the item.Your satisfaction is our first priority. Please leave us positive feedback upon satisfaction of the item. Please email us before leaving negative and neutral feedback. We will try our best to solve the issue. We will leave positive feedback to buyer as soon as buyer pays for the item. Contact us we do try respond
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: United States Application: Stepper Motor, DC Motor. Feature: 1. Adjustable Speed Range: 0.1~999 rpm.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States UART mode: TMC2209 support UART mode. With UART mode you can set current, microstep easily via software. - Compared with TMC2100, the resistance of TMC2209 ... moreoutput driver (RDSon) is slightly lower, thereby reducing power consumption.
Buy It Now
$37.50 Shipping Condition: Seller refurbished Location: Hawthorne, United States 770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, ... moreOn these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. PARKER COMPUMOTOR ZETA6104 STEPPER MOTOR INDEXER DRIVE CONTROLLER SYSTEM This auction is for one Parker ZETA6104. Compumotor’s ZETA6000 Series products are stand-alone. Single-axis drive/controller systems. The ZETA6000 Series products come in 4 different power versions: ZETA6104, ZETA6104-240, ZETA6108 and ZETA6112. These ZETA6000 products pack all the power and reliability of the 6000 family of controllers and ZETA drives into one convenient package. All of the I/O points, RS-232C/RS485 control, operator interface options, and following capabilities for single-axis applications are included. The following package can perform phase shifts, electronic gearbox, and flying cutoff functionality with ease. The ZETA6000 Series package was made for easy and reliable installation. The connections are on removable screw terminals and a standard 50-pin header allowing simple installation and cable routing without having to cut off and reattach a connector. This unit has the following features: One axis package drive/controller, Damping ratios of up to 0.5, Higher acceleration than conventional step systems, Decrease motor vibration, Increase shaft power, Higher performance, Reduce settling time, Increase slower speed smoothness(reduce velocity ripple) Reduce audible noise, E
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer. - DRV8825 driver board is widely used in 3D printers and small ... moreCNC machines. - Stepper Motor Driver is a board for DRV8825 microstepping bipolar stepper motor driver.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States CNC Breakout Communication Cable. This DB25 Male parallel port cable is. These are the only cables of this kind on the market that provides the end user ... morethe fastest to breakout all communication signals from the industry standard DB25 Male paralllel port cable.
Buy It Now
$3.40 Shipping Condition: New Location: China hkiron-aus Description You can use your old micro usb cable to charger your sony Xperia Z1 L39H Compatible with: Sony Xperia Z Ultra XL39h/ Sony Xperia ... moreZ1 L39H please kindly note that this adaper can not sync data.Please understand Package included: 1 x Micro USB to Magnetic Charger Adapter Note: A. If you need different color or similar items. Please click the following photos to visit my eBay store to find it. Thanks. B. Please note the items only could be shipped to your registered address on EBAY. If you need to change address. Please contact us cancel the transaction and purchase again after you modify your EBAY address, then we can shipped to your updated address. Shipping: We Ship to Worldwide. Except Nigeria. And we do not ship to APO/FPO Items will be shipped within 1 business day on payment received. Items are shipped from Hong Kong using Airmail. Reach most of the countries within 10 to 20 business days. Delivery time depends on destination and other factors. It may takes up to 20 business days. Country Delivery Time Working Days(not including holiday) 5-7 8-11 12-14 15-19 20-22 22 Working Days + Saturday + Sunday 5-9 10-15 16-20 21-25 26-30 31 United States Rate(item arrived) 5.1% 50.1% 29.6% 10.5% 4.7% Refund United Kingdom Rate(item arrived) 9.9% 63.2% 19.1% 3.4% 4.4% Refund Australia Rate(item arrived) 21.4% 50.0% 14.3% 7.2% 7.1% Refund France Rate(item arrived) 10.5% 28.6% 43.8% 10.1% 7.0% Refund Germany Rate(item arrived) 11.1% 22.2% 30.3% 20.9% 15.5% Refund Canada Rate(item arrived) 0.0% 47. 1% 31.4% 17.6% 3.9% Refund Spain Rate(item arrived) 3.5% 25.0% 47.9% 12.9% 10.7% Refund Payment: We accept PayPal only. All major credit cards are accepted through secure payment processor PayPal. Payment must be received within 7 business days of auction closing. We ship to your eBay address. Please make sure your eBay address is correct before you pay. REPLACEMENT POLICY: All the products we are selling include factory warranty. Don't cover items that have been abused, burned and damaged in an
Buy It Now
Free Shipping Condition: New Location: Milner, United States This is a benefit because this is also the version that fits nicely on a breadboard leaving space on the sides. These boards will not fit the V3 boards ... morewhich are wider. Motor Driver Board with built-in L293D chip.
Buy It Now
$5.00 Shipping Condition: New Location: China The drive current is automatically halved.
Buy It Now
Free Shipping Condition: New Location: Hainesport, United States Stepper drive subdivision adjustable. X/Y/Z/A four-axis drive, Y-axis dual drive. Support for rotary axis. Product Specifications:4 Axis. Reserve 24V, ... more12V, 5V power output ports to facilitate the expansion of various functions.
Buy It Now
$3.00 Shipping Condition: New Location: China Product Name: 10pcs DC Stepper Motor Drive Controller Board Module L298N Dual H Bridge Basic Attributes Name Double H Bridge Motor Driver Module Working ... moremode Drived by H bridge(double lines) Control chip L298N（ ST） Logical voltage 5V Driving voltage 5V— 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature（ 20 ℃） +135 ℃） Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure： L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function： Circuit principle diagram： This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the onboard 5V lo
Buy It Now
$5.00 Shipping Condition: New Location: China Positioned in advance. In these operations, we do not. CP pulse signal indicator;. 3 output status indicator;. 6 input status indicator;. Input signal ... moreand output signal interface circuit: "Start", "Stop", "(Limit A)A operation".
Buy It Now
$2.50 Shipping Condition: New Location: China Current: 16A. High-speed PWM isolated input, minimum pulse width 2us, isolation bandwidth 50MHz. 2pcs Stepper Motor Driver Expansion Board DRV8825 A4988 ... morefor UNO R3 3D Printer. 12V-24V Stepper Motor Driver Expansion Board 3DPrinter A4988 DRV8825 for Arduino.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Can produce pulse signal, can also produce PWM signal, can choose the jumper. PUL=PULS=CLK Pulse. EN=ENA=FREE Enable. hope you could understand. DIR+ ... moreconnect DIR. PUL+ connect CLK. EN+ connect EN. EN- PUL- DIR- connect together to com- 。.
Buy It Now
Free Shipping Condition: New Location: United States Holding torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver. 7 8 channels output phase current setting.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This DIY kit includes two G540's however one of the included G540's will only have a single drive installed providing you a total of 5 axis of motion ... morewith 8 total inputs, and 2 outputs available. MythBusted Stepper Motor Accuracy Less Than. 001in!
Buy It Now
$8.70 Shipping Condition: Used Location: Grand Rapids, United States Geckodrive GM215 Integrated Motion Controller Stepper Driver Step Motor Drive.
Buy It Now
$3.74 Shipping Condition: Neu Location: China Nano Sheild. It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. Adaptive motor: ... moreStepper motor. The distance / speed / delay / number of cycles can be saved and set after power down.
Buy It Now
Free Shipping Condition: New Location: Fort Collins, United States Driver chip: L298N dual H-bridge driver. The module includes an onboard 5V regulator. Drive peak current Io: 2A / Bridge. When enabled, the 5V is available ... moreas an output on the power connector.
Buy It Now
Free Shipping Condition: New Location: United States 3PCS Hybrid stepper Motor Driver, 2.1-7.2A, 24~110VDC/24-80VAC. 1PC Nema17 Bürstenlosen Motor Driver DM542. Low heat generation, low motor vibration and ... morestable operation. Smooth operation and low noise.
Buy It Now
Free Shipping Condition: New Location: United States The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip ... morePWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
|
|
|
 |