|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China 2 Phase Stepper Motor Driver Leadshine DM556 2.1A-5.6A 200KHz Microstep Driver. Impulse Response Frequency: 200KHz. Can drive four lines, 8 lines of two-phase ... morestepper motor. Subdivision range: 200 ~ 51200ppr.
Buy It Now
$1.63 Shipping Condition: New Location: China Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line). the maximum output current of 4.0A eight optional;. standard common ... moreanode single pulse interface;. Color: See pictures.
Buy It Now
Free Shipping Condition: New Location: 宝安区, China LeadShine DM2282 2/4 Phase Digital Stepper Motor Driver 80-220VAC 0.5-8.2A Feature: The DM2282 is a high voltage. Fully digital stepper drive developed ... morewith advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives. DM2282 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM2282 an ideal choice for high requirement applications. The DM2282 is Suitable for a wide range of stepper motors. From NEMA size 34 to 51. It can be used in various applications such as laser cutters. Laser markers, high precision X-Y tables, labeling machines, CNC router, etc. Its unique features make the DM2282 an ideal choice for applications that require both low-speed smoothness and high speed performances. Anti-Resonance. Provides optimum torque and nulls mid-range instability• Motor self-test and parameter auto-configuration technology.Offers optimum responses with different motors• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance• Microstep resolutions programmable. From 200 steps/rev to 102,400 steps/rev• Soft-start with no“jump” when powered on• Supply voltage up to +220 VAC• Output current programmable. From 0.5A to 8.2A• Pulse input frequency up to 200 KHz• TTL compatible and optically isolated input• Automatic idle-current reduction• Suitable for 2-phase and 4-phase motors• Support PUL/DIR and CW/CCW modes• Over-voltage. Under-voltage, over-current, phase-error protections Specification: Model No.DM2282 Motor Phase:2. 4 Matched Motor:NEMA 34- 51 Supply Voltage:0- 220 VAC. 115-305 VDC Output Current:0.5– 8.2 A Logic Signal Current:7- 20 mA Pulse Input Frequency:0- 200 kHz Microstep Resolu
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This package is for the person wanting to hit the ground running. It features the Gecko G540 motion controller This controller is the new revision 8 model ... morewith 2013 QC date code. This package is the most complete available at his price featuring: 6 Omron Limit Switches(Click the picture to review the details) 1 miniature E-stop Switch(Click the picture to review the details) 3 Nema 23 300oz in 2.4mh inductance motors(Click the picture to review the details) 48v 12.5a S-600 220v power supply Click the picture to review the details) Included is sealed DB9 connectors 4 total for up to four motors. Add 3 solderless connectors for $20(Click the picture to review the details) Also included is a fully licensed copy of Artsoft's Mach3 CNC software(No 500 line G-code limit) from Artsoft. I purchase my software from an authorized distributor. All software is Genuine. And registered to you or your business after purchasing. I will require you to provide me your information to have the software registered to you, or your business. If your looking at this package you realize the value it has. Due to such high turnover on these. If they are on order they will ship within 3 days. There's a reason these don't last long with this package. Please check my other auctions. If you are going to purchase more than one item please message me to combine shipping. My prices are worth taking the time to message me about. USPS shipping is FREE Intenational shipping welcome with adjusted shipping price. Gecko G540 Specs Four 10-Microstep motor drives. 0 to 3.5A rated phase current. 18VDC to 50VDC supply voltage. Mid-band resonance compensation. Auto standby current(70% current) Short-circuit protected. Optoisolation on all LPT signal pins. Two 1A at 0 to 50VDC rated outputs. Four SPST to GND inputs(TTL) FAULT indicator LED.Signal to PC. POWER indicator LED. I-SET resistor on motor connector. TRIM adjust for motor smoothness. Panel mount(5.7” by2.4” hole dim. Anodized aluminum package. No heatsink needed below 40C ambient. E
Buy It Now
Free Shipping Condition: New Location: Bronx, United States It has excellent performance, high speed and high torque output, low noise, low vibration, and low heat. 【Product Introduction ②】The DMA860S driver can ... moreselect the current and subdivision through the DIP switch.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 3DM2283 LeadshineDigital Microstep drive 3 phase 11.7A AC180-240V fit 86 110 130 motor Features: Extra-low motor noise offers excellent quietness Anti-Resonance, ... moreprovides optimum torque and nulls mid-range instability Self-test and Auto-configuration technology, offers optimum responses with different motors Microstep resolutions programmable, from full-step to 102,400 steps/rev Supply voltage up to +240 VAC Output current programmable, up to11.7A Pulse input frequency up to 200 KHz Automatic idle-current reduction Supports PUL/DIR and CW/CCW modes Suitable for 3/6 leads 3-phase motors.
Buy It Now
$5.99 Shipping Condition: New Location: China QUALITY-GADGETS eBay Item! Upgraded 5 Axis Cnc Breakout Board For Microstep Controller + Cables + Software 5 Axis USB Breakout Board For CNC Single Stepper ... moreMotor Driver Controller Descriptions: The latest upgraded salable 5 axis breakout board is speacilly designed for the CNC single axis stepper driver controller. Such as M542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A) DM860(A) etc single axis stepper driver controller series. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. Key Features: Upgraded circuit. Work more peacefully and steady than the previous version Maximum support 5-axis stepper motor driver controllers Two ways to get power. 5V DC power supply or USB port to get power from PC directly Two-stage signal processing. Smooth signal transmission, powerful anti-jamming 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller Wiring Diagram: Electrical properties(ambient temperature Tj = 25 ℃ pm) Input Power 5V DC power supply or USB port to directly get power from PC Compatible Stepper Motor Driver Max 5 single axis stepper motor driver controller Drive type Pulse + Direction + Enable Signal Control Net/Total Weight Approx 80g/300g Dimensions 90* 82* 15mm(L*W*H) 1 x 5 Axis Breakout Board 1 x DB25 Parallel Cable 1 x USB Power Cable 1 x CD Click here for the Mach3 software USD 193.69(Free P&P* USD 185.84(Free P&P* USD 276.69(Free P&P* USD 58.05(Free P&P* USD 60.99(Free P&P* USD 83.80(Free P&P* USD 86.99(Free P&P* USD 72.19(Free P&P* GBP 83.49(Free P&P* GBP 205.99(Free P&P* USD 64.40(Free P&P* USD 77.69(Free P&P* GBP 89.29(Free P&P* USD 63.79(Free P&P* USD 36.66(Free P&P* USD 31.59(Free P&P* USD 66.49(Free P&
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 PCS Nema 34 stepper motor with Single shaft, 1600oz. in, biloar. 3 PCS Stepper motor driver, peak 7.8A 24-80VDC. Nema 34 stepper motor Hording torque ... morewhen DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$5.00 Shipping Condition: New – Open box Location: Sylmar, United States FOR CLOUDRAY. READ… READ. READ… READ ! After it has been checked that the item has not been tampered or neglected in any form. Keep this in mind. It will ... moresave us both the trouble. I am not here to cheat any one or take any one’s hard earned money.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 4 pcs Nema 34 stepper motor with SINGLE shaft, 1600oz. in, biloar. Nema 34 stepper motor 4 pcs Stepper motor driver, peak 7.8A 24-80VDC. Hording torque ... morewhen DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$10.40 Shipping Condition: New Location: Ridgefield, United States The 2DM442 is a two phase digital stepper driver based on ARM. Its Micro step resolutions and output current are programmable. Its unique features make ... morethe 2DM442 to be an ideal solution for applications.Features.
Buy It Now
Free Shipping Condition: Used Location: Malaysia SERVO DRIVE.
Buy It Now
Free Shipping Condition: New Location: China Power: 160W. This Stepper Motor Driver provides over heat, over current and short circuit protection. Large area heat sink can effectively dissipate heat. ... more1 x Stepper Motor Driver. Quantity: 1pc. Over heat, over current and short circuit protection.
Buy It Now
Free Shipping Condition: New Location: United States QUALITY-GADGETS eBay Item! Latest 3rd Generation Breakout Board. Gcode Recoded, Manual Programming Function Descriptions I. About the 3rd Generation Breakout ... moreBoard Set This breakout board has been upgraded to an intelligent and industrial-level interface board set. The redesigned PCB board enables smoother control of microstep drivers and stepper motors with lower noise. It has high compatibility with all the 2-phase. 3-phase and 4-phase microstep drivers and stepper motors. The equipped manual control tools bring more user friendly experience. It has standard version and professional version to meet different user needs. II. Standard Version VS Professional Version. Functions, Standard Version, Professional Version, Intelligent motor control via PC, Manual motor control via control panel, Intelligent switch between PC and control panel, Synchronous coordinates display on PC and display panel, Real-time tracking of motor moving path, Automatic G-code recording, Manual G-code programming, III. Two Unique Functions of Professional Version. Automatic G-code recording function With the embedded intelligent memory chip. This breakout board can easily record MAXIMUM 4 axis' X.Y,Z,A axis) G-code running on the CNC software(e.g. Mach3. EMC2, KCAM4. Etc. of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer. Manual G-code programing function. The upgraded built-in manual control tools(display panel and control panel) not only can be used for manual motor control. But also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip. After which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. This package is 5 Axis Professional Version(BCD-P) If you need the standard version. Please refer to our related item or simply contact us. PCB Instructions Features High performance.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States 10x A4988 Stepper motor driver module. Thermal shutdown circuitry. Load short-circuit protection. Ground fault protection. Microstep resolutions: Full, ... more1/2, 1/4, 1/8 and 1/16. Maximum current per phase: 2A (with cooling).
Buy It Now
$1.99 Shipping Condition: New Location: China In the user expects low cost, high current operation. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor. Output current: 0.5A-4.0A. Small ... moresize, easy to install. Signal input: single ended, pulse / direction.
Buy It Now
$18.00 Shipping Condition: Used Location: Rochester, United States Used. Removed from working equipment. USPS PRIORITY SHIPPING. As pictured.
Buy It Now
$30.00 Shipping Condition: New Location: United States 4 x TB6560 MD430 single axis driver. TB6560 MD430 Low noise of stepper motor driver. MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping ... moredriver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth--S3/S4), torque (100%, 75%, 50%, 20%--S5/S6) ,work current (0-3A--SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%).
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 4 pcs Nema 23 stepper motor 425 oz.in bipolar 23HS9430B Dual shaft. Nema 23 stepper motor Stepper motor driver DM542A Hording torque when DM542A run under ... morehigh speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$15.76 Shipping Condition: New Location: Ridgefield, United States The 2DM556 is a two phase digital stepper driver based on DSP. Its Micro step resolutions and output current are programmable. Its unique features make ... morethe 2DM556 to be an ideal solution for applications.Features.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 pcs Nema 23 stepper motor 270oz. in bipolar 23HS9430 Single shaft. Nema 23 stepper motor Stepper motor driver DM542A Hording torque when DM542A run ... moreunder high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$1.99 Shipping Condition: New Location: Los Angeles, United States Applicable stepper motor: 42,57,86 type 2. 3, eight output current optional, the maximum output. 9, provide energy-efficient semiautomatic current lock ... morefunction;. 1x Microstep Driver. phase 4-phase (4-wire 6 wire line 8).
Buy It Now
Free Shipping Condition: Used Location: Malaysia BT# 13165 M09C1-090.1V You are looking for: ORIENTAL MOTOR VEXTA SPD5520 5-PHASE DRIVER BOARD NEW ITEM. WITH ORIGINAL BOX! 30 DAYS WARRANTY! Manufactured ... moreby: ORIENTAL MOTOR. Additional info: DRIVER BOARD Model: SPD5520 5-PHASE Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
Buy It Now
Free Shipping Condition: Used Location: Bedford, United States You are buying a used item in good working condition. No other accessories included. Item pictured only.
Buy It Now
Free Shipping Condition: New Location: Mandeville, United States 128 Microstep Stepper Motor Driver-LC2054DA.
Buy It Now
Free Shipping Condition: New Location: United States TBR_DOMAIN_NAME} eBay Item CNC 4 Axis TB6560 Stepper Driver Board Controller +CD SAVEBASE is a customer satisfaction oriented online business company ... moresupplying you with the best valued and affordable accessories and parallel devices for your personal digital equipments. Enjoy peace of mind shopping experience with us. © SAVEBASE.com All Rights Reserved, Only USD 77.69 +P&P USD* Product Info, Jump to: NEW* 4 Axis TB6560AHQ Stepper Motor Driver Controller Product Features: Toshiba TB6560AHQ chip- High power. Maximum 3.5A drive current chipset. 1-1/16 microstep setting- Higher accuracy and smoother operation than standard 1. 1/2 step. Adjustable 1.5A-3A drive current settings for each axis- 25%50%75%100% of full current can be set for different stepper motors. Attention: This driver is the 1.5A-3A version. It's specially designed for stepper motors with rated current from 1.5A to 3A. It's NOT compatible with stepper motors with rated current below 1.5A or above 3A. If the rated current your stepper motors is below 1.5A. You can choose the 0.5A-2.5A version. Please let us know which version(1.5A-3A version is default) you need immediately after placing an order. Overload. Over-current and over-temperature safety- Full protection for your computer and peripheral equipment. On board current switching- Power output can be set according to specific user requirement. Full closed-type optical isolation to protect the user's computer and equipment. Relay spindle interface- Outputs Max. 36V 7.5A for spindle motors or coolant pump(only one device can be powered by this output! 4 channel inputs interface- Can be used for XYZ limit and emergency stop. Professional design- Two stage signal processing with super anti-jamming. Bipolar constant current chopper drive with non-resonant region- Controls motors smoothly through range without creep effect. Four-input Control; Allow setting the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment. Universal architecture- Supports most parallel
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Its unique features make the DM1182 an ideal ... moresolution for applications that require low-speed smoothness.
Buy It Now
Free Shipping Condition: New Location: Fountain Valley, United States With the features of low noise, low vibration, low heating and high-speed high torque output, it is suitable for most stepper motors. 1 x Stepper Motor ... moreDriver 3DM580S. Soft-start with no “jump” when powered on.
Buy It Now
Free Shipping Condition: New Location: United States QUALITY-GADGETS eBay Item! 3rd Gen 5Axis CNC Router Breakout Board Set Display/Control Panel Gcode Recorded Descriptions I. About the 3rd Generation Breakout ... moreBoard Set This breakout board has been upgraded to an intelligent and industrial-level interface board set. The redesigned PCB board enables smoother control of microstep drivers and stepper motors with lower noise. It has high compatibility with all the 2-phase. 3-phase and 4-phase microstep drivers and stepper motors. The equipped manual control tools bring more user friendly experience. It has standard version and professional version to meet different user needs. II. Standard Version VS Professional Version. Functions, Standard Version, Professional Version, Intelligent motor control via PC, Manual motor control via control panel, Intelligent switch between PC and control panel, Synchronous coordinates display on PC and display panel, Real-time tracking of motor moving path, Automatic G-code recording, Manual G-code programming, III. Two Unique Functions of Professional Version. Automatic G-code recording function With the embedded intelligent memory chip. This breakout board can easily record MAXIMUM 4 axis' X.Y,Z,A axis) G-code running on the CNC software(e.g. Mach3. EMC2, KCAM4. Etc. of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer. Manual G-code programing function. The upgraded built-in manual control tools(display panel and control panel) not only can be used for manual motor control. But also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip. After which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. This package is 5 Axis Professional Version(BCD-P) If you need the standard version. Please refer to our related item or simply contact us. PCB Instructions Features High performance.
Buy It Now
$30.00 Shipping Condition: New Location: United States CW5045 high microstep stepper motor driver. 4 x23HS2430B Nema23 stepper motor (Dual Shaft) 112mm,425oz-in,2.8N.m,3.0A. 4 xCW5045 stepper motor driver ... more24-50V,4.5A,256microstep. 1 x5 Axis breakout board V5 type.
Buy It Now
Free Shipping Condition: New Location: United States Benefit High-performance CNC Router 1 Axis TB6600 Stepping Motor Driver Board 5A The Latest 1 Axis TB6600HG Microstep Motor Driver 0.2A-5.0A( TB1H) Descriptions: ... moreThe TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for the comparison between TB6560AHQ and TB6600HG Chipset. Click here for more details about the TB6600HG Chipset. Features: High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 50V DC Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1. 2, 4(New Mode) 8, 16 adjustable microstep control, motors run more precisely and smoothly. Equipped with the 3rd generation of breakout board. Display panel and control pad to control the motor manually. Overload. Overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. Cooling Aluminium Box Design for Cooling. And protect the driver board from being damaged by dirt, dust or other liquids. Applications: For processing various pattern mould. For advising. Such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc. For carving portrait. Scenery, handwriting, sealing, etc. Suitable for any small-and-medium automatic equipment with CNC controller. Such as X-Y-Z tables, labeling machines, laser cutters, engra
Buy It Now
$15.00 Shipping Condition: New Location: Rowland Heights, United States 1 PC Stepper motor driver DQ860HA V3.3. Signal current. Not condensation, no water droplets. 0 ℃ –70 ℃, avoid dust and corrosive gas. Usinging Temperature. ... more-20 ℃ - +80 ℃. Storage Temperature.
Buy It Now
Free Shipping Condition: New Location: China 1 x FMD2740C Stepper Motor Driver. FMD2740C stepper motor driver. The FMD2740C driver can drive all current 4A 4-wire, 6-wire or 8-wire 2-phase / 4-phase ... moremotors, are detailed below 4-wire, 6-wire, 8 wire stepper motor connection.
Buy It Now
Free Shipping Condition: New Location: China WITH HEAT SINK: The stepper motor driver is equipped with heat sink to ensure good heat dissipation, lower heating efficiency and safe operation. FOR ... more3D PRINTER: The stepper motor driver module has ultra quiet operation, is a common accessory of 3D printer, easy to install and replace.
Buy It Now
Free Shipping Condition: New Location: United States Model: TB6600. It is an updated version of TB6600 4A stepper motor driver. Feature: 1. Original stepper motor driver chip, the current is selected by ... moreDIP switch. Item Type: Stepper Motor Driver. Powerful anti-high frequency interference ability, and overheating, overcurrent, short circuit protection.
Buy It Now
Free Shipping Condition: New Location: China Stepper Driver – TB6600 4A 40V Features Support 8 kinds of current control Support 7 kinds of micro steps adjustable The interface adopts high-speed optocoupler ... moreisolation Automatic semi-flow to reduce heat Large area heat sink Anti-high-frequency interference ability Input anti-reverse protection Overheat, over current and short circuit protection Specifications Input Current: 0-5A Output Current: 0.5-4.0A Power (MAX): 160W Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32 Dimension: 96x56x33 mm Weight: 0.2 kg.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$2.99 Shipping Condition: New Location: China Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line). the maximum output current of 4.0A eight optional;. standard common ... moreanode single pulse interface;. Color: See pictures.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Stepper Drive TB6600. In the user expects low cost, high current operation. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor. Torque Modle ... moreFlange Shaft Current Length Step Angle Link. Here is the motor you can match for the driver.
Buy It Now
Free Shipping Condition: New Location: China Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor. Signal input: single ended, pulse / direction. Output current: 0.5A-4.0A. 1 x Setpper Driver. ... moreSmall size, easy to install. We do not provide pick-up service.
Buy It Now
Free Shipping Condition: New Location: United States QUALITY-GADGETS eBay Item! 3rd Gen 5Axis CNC Router Breakout Board Set Display/Control Panel Gcode Recorded Descriptions I. About the 3rd Generation Breakout ... moreBoard Set This breakout board has been upgraded to an intelligent and industrial-level interface board set. The redesigned PCB board enables smoother control of microstep drivers and stepper motors with lower noise. It has high compatibility with all the 2-phase. 3-phase and 4-phase microstep drivers and stepper motors. The equipped manual control tools bring more user friendly experience. It has standard version and professional version to meet different user needs. II. Standard Version VS Professional Version. Functions, Standard Version, Professional Version, Intelligent motor control via PC, Manual motor control via control panel, Intelligent switch between PC and control panel, Synchronous coordinates display on PC and display panel, Real-time tracking of motor moving path, Automatic G-code recording, Manual G-code programming, III. Two Unique Functions of Professional Version. Automatic G-code recording function With the embedded intelligent memory chip. This breakout board can easily record MAXIMUM 4 axis' X.Y,Z,A axis) G-code running on the CNC software(e.g. Mach3. EMC2, KCAM4. Etc. of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer. Manual G-code programing function. The upgraded built-in manual control tools(display panel and control panel) not only can be used for manual motor control. But also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip. After which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. This package is 5 Axis Professional Version(BCD-P) If you need the standard version. Please refer to our related item or simply contact us. PCB Instructions Features High performance.
Buy It Now
Free Shipping Condition: Used Location: Malaysia Used: An item that has been used previously. -For item condition not as described, defective.
Buy It Now
$30.00 Shipping Condition: New Location: United States This item includes: 1 PC Nema 23 Stepper Motor dual shaft with 428oz-in holding torque, 1 PC Stepper Driver with 4.2A DQ542MA digital serial replacing ... moreM542, Email： MSN: Skype: happy_saron 1. Stepper Motor Technical Specifications Part No. WT 57STH115-0304B(57BYGH115-003B) Frame Size: NEMA23 Step Angle: 1.8 degree Voltage: 6.3 VDC Current: 3 A/phase Resistance: 2.1 Ohm/phase Inductance: 9 mH/phase Holding torque: 30 Kg-cm 428 oz-in Rotor inertia: 810 g-cm2 Detent torque: 0.89 kg-cm Number of wire leads: 4 Weight: 1.55KG Length: 115 mm Front shaft Diameter: 8mm Rear Shaft Diameter: 6.35mm Front shaft length: 21mm Rear Shaft Length: 15mm Round Shaft 2. Stepper Motor Driver with 4.2A Current, 128 Microstep DQ542MA is a type of two-phase hybrid stepping motor driver. The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver. What’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on. Features: l High performance. Low price l Average current control. 2-phase sinusoidal output current drive l Supply voltage from 18VDC to 50VDC l Opto-isolated signal I/O l Overvoltage. Under voltage, overcorrect, phase short circuit protection l 15 channels subdivision and automatic idle-current reduction l 8 channels output phase current setting l Offline command input terminal l Motor torque is related with speed. But not related with step/revolution l High start speed l High hording torque under high speed Electrical specification: Input voltage 18-50VDC Input current ＜ 4A Output current 1.0A ～ 4
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Cnc Router 5 Axis Breakout Board For Microstep Controller& 0-10V Analog Output More. The latest upgraded 5 axis breakout board is specially designed ... morefor the CNC single axis 2-phase stepper driver controller. The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. amplified. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger. With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. parallel-control CNC software. High performance. Cost-effective. Maximum support 5-axis stepper motor driver controllers. Compatible with MACH3. Linux CNC(EMC2) etc. parallel-control CNC software. USB power supply and peripherals powered phase are separated to protect computer security. All the signals are opto-isolated which can protect your computer security. 5-input interface to define the Limit. Emergence-Stop, Cutter alignment etc. Wide input voltage range: 12-24V. And with anti-reverse function. One relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. Compatible with all the 2 phase microstep drivers in the market. Output 0-10V analog voltage for inverter to control the spindle speed. Shape Pulse and direction signals. Data transfer speeds of up to 10MBit/S. Amplification. Filtering, enhancement processing drivers enable signal. Suitable for a wide range of 2-phase microstep drivers in the market. Such as M542. M542H, MA860H, 2MA2278, 2M542, 2M860 etc. For advising. Such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc.It can be used in various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, pick-place devices, and so on. This breakout board is just a interface board. NOT a stepper driver board, it must work together with the microstep drivers(eg. MA860H etc. to control
Buy It Now
Free Shipping Condition: New Location: China Power Switching Module for Microstep Driver for Lerdge 3D Printer BoardBoard Adapter Module External Power Switching Module for Microstep DriverFeatures:3D ... morePrinter Board External Large Motor Adapter Module, suitable for external currentEasy toMaterial: PlasticModule Size: 20x20x4mmCable length:50cm/19.68inchColor:BlackPackage includes: (Without retail package)1 External Power Switching Module * 1pc1 CablePackage includes: (Without retail package)Note: Please make sure the connecting direction is right.
Buy It Now
$14.38 Shipping Condition: Seller refurbished Location: Long Beach, United States SERIAL NUMBER WILL VARY MANY AVAILABLE REMOVED FROM FUNCTIONING PANEL
Buy It Now
Free Shipping Condition: Used Location: Boise, United States
Buy It Now
$1.43 Shipping Condition: New Location: China 1 DM542 stepper motor driver. 57 series 4.5A or less (including 4.5A) two-phase four-wire, six-wire, eight-wire stepper motor also can be used. Output ... morephase current:1.5A-4.5A. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
![]()
Buy It Now
Free Shipping Condition: New Location: United States 4 Axis CNC 3.5A TB6560 Stepper Motor Driver Board Controller F Engraving Machine. Click To Enlarge CNC stepper motor driver board 96560A V1 adopts the ... morenew chip TB6560AHQ of TOSHIBA. The max ouput current can reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A. The advantages of the TB6560AHQ chip: The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed. Flush type low heat: The area of the chip can support itself to cool when the current is low Supports a lot of stepper motors The advantages in the high-speed running condition board might be made partly out of recycled parts. Because of the environmental protection Features: 4-wire 0-3.5A(normally 3A. The 3.5A is the peak current)can be regulated rate current output, bipolar stepper motor driver Standard parallel port. Supports Mach 2, KCAM 4 etc. Optical isolated(IO) and DCDC power isolated to protect the PC parallel port and other equipments Limit and emergency stop port( standard DB9 port) 4 working modes: mixed mode. Fast mode, slow mode, standard mode 4-resolution: 1 1/2 1/4 1/16 12-36V single power input uses the switch power chip as the 5V power supply. Stable and low heat Adopts RC + 7414 auto semi-flow The relay output can control the main axis 5th axis extension control port Packing list: 1* 4 Axis CNC TB6560 Stepper Motor Driver Board 1* DB25 Parallel Male- F emale Cable 4* Connect Terminal A997A NOTE We try our best to make every transaction perfectly, just for winning your F ive-Star rating. If you have any dissatisfaction. Please contact us. We will give you the most satisfactory results. PLEASE don't leave a neutral or negative easily. Shipping Item will be shipped within 24 hours on payment received from Hong Kong using Airmail. Only shipped to buyer's PayPal address. Please confirm with your PayPal address before you bid. Delivery time depends on destination and other factors. It may takes up to 30 business days. O
Buy It Now
$14.50 Shipping Condition: New Location: Hoffman Estates, United States The highest micro step is 60000ppr. Stepper Motor Driver DQ2722MA, 110-220VAC, 7.0A, 200 Microstep. Drive current is adjustable in 16 channels from 1.2A/phase ... moreto 7.0A/phase.
Buy It Now
$17.45 Shipping Condition: New Location: Canada
Buy It Now
Free Shipping Condition: New Location: 金东区, China This driver is a DSP digital DM860H stepper motor driver. The subdivision is increased to 128 subdivisions, which is suitable for high subdivision applications. ... moreApplicable stepper motors: 57, 86 type 2-phase 4-phase (4 wires, 6 wires, 8 wires).
Buy It Now
Free Shipping Condition: Seller refurbished Location: Newman, United States SERVEX FTD3S2P11 Stepping Motor Driver Japan Servo Co. Unit: SERVEX FTD3S2P11. Board: Japan Servo Co AS26806. STEP ANGLE. Enables motor rotate silently ... morewhen micro step driven. High torque and high speed response achieved using the constant current driver.
Buy It Now
$11.00 Shipping Condition: Used Location: Glen Mills, United States
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States A4988 Is a complete microstepping motor driver, With built-in converter, Easy to operate. The product is available in the whole, half, 1/4.1/8 and 1/16. ... moreAs long as it is in" Stepping" Input a pulse in the input, Microstep can drive motor.
Buy It Now
Free Shipping Condition: New Location: China 3 pcs Stepper Motor Driver 2 Phase 4.5A step Motor Drive Controller 2 Phase 4.5A micro stepper drive step Motor driver(DC Bus Voltage: 24-48VDC. Output ... moreCurrent: 1-4.5A) Product Description: The SR series drives are cost-effective. High performance 2 phase step drives. The design is based on PID current control technology, and features high torque, low noise, and low vibration. The running current and microstep resolution are switch selectable. Features: Step direction inputs Optically isolated 5-24V inputs Built-in digital signal filter Microstepping 8 resolutions selectable via switches Other resolutions available upon request Command signal smoothing available upon request Running current 8 current levels selectable via switches Other current levels available upon request Idle current reduction 50% or 90% of running current Enable input Optically isolated 5-24V inputs Disables and enables the drive amplifier Resets drive error and alarm Fault output Optically isolated output for fault indication Self test Motor selection Select from 8 factory loaded motors& low/high inertia Custom motor settings available Electrical Specifications: Current Setting: The output current of the SR4 Step Drive is set by the SW1. SW2, and SW3 switches and can be changed as necessary. There are 8 settings available according to the ON/OFF combination of the switches. Microstep Setting: The microstep resolution is set by the SW5. SW6 and SW7 switches. There are 8 settings. Environmental Specifications: Mechanical Outline: Payment: We accept paypal payment ONLY. Please pay the money within 3 days after the ended time. Import duties. Taxes and charges are not included in the item price or shipping charges. Shipping& Handling: 1. Ship to Canada and Ship to Contiguous United States( excluding Alaska. Hawaii and overseas territories) 2. Delivery time:By Fedex Ground.Generally need about 3-8 business days. 3. Will email you/ or post in Ebay the tracking number once item shipped so you can track your parcet in detail 4. Ship to PayPal
Buy It Now
Free Shipping Condition: New Location: United States Powerful: This stepper motor driver module has better heat dissipation, supports higher currents and supports sensorless functions. Item Type: Stepper ... moreMotor Driver. Feature: 1. 5 x Heat Sink. Outstanding Performance: With an RDSon value of 0.2A, the TMC2209 driver has a lower resistively conducted output driver, providing lower power consumption and higher current.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Stepper Drive TB6600. In the user expects low cost, high current operation. Stepper Motor. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor. ... moreRosin Heat Press Machine. Jewelry Design & Repair.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Standard ... moreDriver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping Condition: New Location: United States CNC 4 Axis Kit Stepping Driver TB6600HG Box Set. LCD Display, Keypad 5A More. Description I. About the 3rd Generation TB6600HG Stepper Controller This ... moreTB6600HG Stepper Controller has all the functions of TB6560AHQ Stepper Controller. And is specially developed for stepper motors with higher currents. All the 2 or 4 phase Nema17, Nema23, Nema24 stepper motors with current range of 0.2A~5.0A work perfectly with this TB6600HG Stepper Driver. It has standard version and professional version to meet different user needs. For further information. Please click on the following links. II. Standard Version VS Professional Version. Functions, Standard Version, Professional Version, Intelligent motor control via PC, Manual motor control via control panel, Intelligent switch between PC and control panel, Synchronous coordinates display on PC and display panel, Real-time tracking of motor moving path, Aluminum& high intensity PVC housing protection, Automatic G-code recording, Manual G-code programming, III. Two Unique Functions of Professional Version. Automatic G-code recording function With the embedded intelligent memory chip. This stepper driver can easily record MAXIMUM 4 Axis' X.Y,Z,A Axis) G-code running i n the CNC software(e.g. Mach3. EMC2, KCAM4. Etc. on the computer, after which you can run motors using the recorded G-code without computer. Manual G-code programing function. The upgraded built-in manual control tools(display panel and control panel) can not only be used for manual motor control. But also manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip. After which you can easily run motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. This package is 4 Axis Professional Version(TB4H-CD-P(Box) If you need the standard version. Please refer to our related item or simply contact us. PCB Instructions& Specifications Display Panel& Control Panel Features High performance. Cost-effective; Manual motor c
|
|
|
 |