In 
 
Order by: 
Available to: 
Price: 
 - 
$
300
2d 19h 37m 39s
0 bids
$500 Now
$45 Shipping
Location: Millinocket,ME,USA
$
500
2d 17h 46m 33s
1 bids
Free Shipping
Condition: Used
Location: Plymouth,PA,USA
$
399
Buy It Now
$0 Shipping
Condition: Used
Location: Nipomo,CA,USA
Item is used and shows signs of wear but functions according to manufacturer's specs. GENERAL INFORMATION The REO Single Circuit Blasting Machines ... moreare of solid-state capacitor discharge design. They offer a wide variety of energy and voltage choices in a series of compact. Lightweight, portable, water and corrosion resistant enclosures, and are designed to provide extended service under a variety of operation conditions. FIRES UP TO 65 DETONATORS: Commercial or military. 2 ohm wired in a single series, 12 ohm max. lead line, based on 20 mj/ohm delivered in 5 ms. POCKET SIZE: 4.1" X 2.2" X 3.6" 10.5 X 5.6 X 9.0 cm) RELIABLE: Blasting machine will not fire or discharge until fully charged to design voltage. LIGHTWEIGHT: 10 oz. 0.3 kg. ENVIRONMENTALLY SEALED: Water and corrosion resistant delrin case. FAST CHARGE: 1-3 second charge time using one 9V alkaline battery. LONG BATTERY LIFE: Provides more than 150 charge-fire cycles. MILITARY RATED. NSN: 1375-01-417-7104 COLOR: Olive Drab ENERGY: 450 volts. 4 joules MODELS: CD450-4J
$
175
6d 20h 50m 29s
0 bids
Free Shipping
Condition: Used
Location: Frankfort,KY,USA
Item is used and shows signs of wear but functions according to manufacturer's specs. GENERAL INFORMATION The REO Single Circuit Blasting Machines ... moreare of solid-state capacitor discharge design. They offer a wide variety of energy and voltage choices in a series of compact. Lightweight, portable, water and corrosion resistant enclosures, and are designed to provide extended service under a variety of operation conditions. FIRES UP TO 65 DETONATORS: Commercial or military. 2 ohm wired in a single series, 12 ohm max. lead line, based on 20 mj/ohm delivered in 5 ms. POCKET SIZE: 4.1" X 2.2" X 3.6" 10.5 X 5.6 X 9.0 cm) RELIABLE: Blasting machine will not fire or discharge until fully charged to design voltage. LIGHTWEIGHT: 10 oz. 0.3 kg. ENVIRONMENTALLY SEALED: Water and corrosion resistant delrin case. FAST CHARGE: 1-3 second charge time using one 9V alkaline battery. LONG BATTERY LIFE: Provides more than 150 charge-fire cycles. MILITARY RATED. NSN: 1375-01-417-7104 COLOR: Olive Drab ENERGY: 450 volts. 4 joules MODELS: CD450-4J
$
950
Buy It Now
Free Shipping
Condition: Used
Location: Corona,CA,USA
$
700
8d 2h 4m 48s
0 bids
$25 Shipping
Condition: Used
Location: New Haven,CT,USA
$
7.49
6d 17h 23m 8s
0 bids
$4 Shipping
Condition: Used
Location: Bethlehem,PA,USA
$
4,000
5d 6h 15m 5s
0 bids
$0 Shipping
Condition: Used
Location: North Royalton,OH,USA
$
0.99
3d 7h 6m 3s
0 bids
$47.65 Shipping
Condition: New
Location: Hong Kong
$
899.95
Buy It Now
$35.85 Shipping
Condition: Used
Location: Sophia,NC,USA
$
550
Buy It Now
$39.99 Shipping
Condition: Used
Location: Carroll,OH,USA
$
899
6d 23h 42m 17s
0 bids
Free Shipping
Condition: New
Location: Canfield,OH,USA
$
450
1d 1h 50m 56s
0 bids
$600 Now
Free Shipping
Condition: Used
Location: Fairfax,VA,USA
You are bidding on a dupont blasting machine. This is No 3 and is rated for igniting 1 to 30 fuses. It has two metal badges but appears that the lower ... moreside badge is missing. There are chip and dings in the wood from age and the wood is weathered. There is a chip/chunk of wood missing on the bottom as seen in the photos. I am selling this for a friend and was told it works but I have no way of testing it. Please look at the photos for condition. I believe this could be cleaned up and refinished or keep it as is. Its a neat conversation piece.
$
23.95
4d 21h 53m 50s
0 bids
$0 Shipping
Condition: New
Location: Naples,FL,USA
$
99
Buy It Now
$33 Shipping
Condition: Used
Location: Poland
$
438
Buy It Now
$55 Shipping
Condition: Used
Location: Greece
$
117
6d 6h 20m 1s
0 bids
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
39.99
Buy It Now
$0 Shipping
Condition: Used
Location: Birmingham,AL,USA
$
359
6d 8h 34m 17s
0 bids
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
3.99
3d 22h 21m 34s
0 bids
$5.99 Now
Free Shipping
Condition: Used
Location: Raymond,WA,USA
$
29.98
Buy It Now
$4.99 Shipping
Condition: Used
Location: Wooster,OH,USA
$
439
4d 7h 37m 26s
0 bids
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
15
Buy It Now
$10.95 Shipping
Condition: Pre-owned
Location: Bastrop,TX,USA
$
278
4d 12h 3m 2s
0 bids
$0 Shipping
Condition: New
Location: USA
$
49.99
Buy It Now
$4 Shipping
Condition: Used
Location: Fort Myers,FL,USA
$
9.99
Buy It Now
$6.5 Shipping
Condition: Pre-owned
Location: Ash Flat,AR,USA
$
88
4d 18h 51m 5s
0 bids
$0 Shipping
Condition: New
Location: USA
$
45,000
Buy It Now
Free Shipping
Condition: Used
Location: Anoka,MN,USA
$
5.85
16h 1m 32s
0 bids
$0 Shipping
Condition: New with tags
Location: Haslet,TX,USA
$
24.9
Buy It Now
$0 Shipping
Condition: Pre-owned
Location: Sun City,AZ,USA
$
22.48
Buy It Now
$4.99 Shipping
Condition: Used
Location: Wooster,OH,USA
$
285
6d 10h 58m 29s
0 bids
$0 Shipping
Condition: New
Location: USA
$
34.99
Buy It Now
Free Shipping
Condition: Acceptable
Location: Red Lion,PA,USA
$
278
4d 15h 51m 4s
0 bids
$0 Shipping
Condition: New
Location: USA
$
1,250
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2028(1) Used 10" x 14 Ga. Durant ... moreStock Straightener. Head Only; S/N 47-139 Specifications: Capacity.10" x 14 ga. Number of Rolls.7(3 over 4) Maximum Stock Width.10" Maximum Stock Thickness.14 ga. Overall Dimensions.17" L-R x 17" F-B x 11" High(est. Weight.150 lbs. est. F.O.B.Casa Grande. Arizona*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical, horizontal, wheel) ovens, furnaces, process equipment, hydraulic pumps, turret punches, ironworkers, plate rolls, power hack saws, bandsaws, shapers, planers, shears, threaders, vibratory finishers, welders, welding preposi
$
52,500
Buy It Now
Free Shipping
Condition: Used
Location: Pedricktown,NJ,USA
$
359
4d 6h 51m 47s
0 bids
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
8
Buy It Now
$3 Shipping
Condition: Used
Location: San Diego,CA,USA
$
14.99
Buy It Now
$4.99 Shipping
Condition: Used
Location: Wooster,OH,USA
$
38.5
5d 22h 44m 5s
10 bids
$10 Shipping
Location: Annville,PA,USA
$
1.5
Buy It Now
Free Shipping
Condition: Acceptable
Location: East Lansing,MI,USA
$
3.49
Buy It Now
$0 Shipping
Condition: Used
Location: Pendleton,IN,USA
$
14.95
6d 23h 11m 50s
0 bids
$4.95 Shipping
Location: Duncan,OK,USA
$
24.96
Buy It Now
$4.99 Shipping
Condition: Used
Location: Wooster,OH,USA
$
16.52
Buy It Now
$0 Shipping
Condition: Very Good
Location: Shakopee,MN,USA
$
18,550
Buy It Now
Free Shipping
Condition: Used
Location: Lincolnshire,IL,USA
$
11.99
Buy It Now
$0 Shipping
Condition: Very Good
Location: Kennesaw,GA,USA
$
1.99
Buy It Now
$0 Shipping
Condition: Used
Location: Fenton,MO,USA
$
11.41
Buy It Now
$0 Shipping
Condition: Very Good
Location: Shakopee,MN,USA
$
215.99
Buy It Now
$0 Shipping
Condition: Used
Location: Cranford,NJ,USA
$
227.88
Buy It Now
$24.88 Shipping
Condition: New
Location: Fort Myers,FL,USA
$
595
Buy It Now
$0 Shipping
Location: Birmingham,AL,USA
$
129.95
Buy It Now
$0 Shipping
Condition: New
Location: Gilbert,AZ,USA
$
138.49
Buy It Now
$0 Shipping
Condition: New with box
Location: USA
$
45.99
Buy It Now
$0 Shipping
Condition: New
Location: Vulcan,MI,USA
$
29.95
Buy It Now
$0 Shipping
Condition: New
Location: Gilbert,AZ,USA
$
79.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
39.88
Buy It Now
$0 Shipping
Condition: New
Location: Fort Myers,FL,USA
$
49.95
Buy It Now
$9.5 Shipping
Location: Lostine,OR,USA
$
178.88
Buy It Now
$19.88 Shipping
Condition: New
Location: Fort Myers,FL,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
Item is used and shows signs of wear but functions according to manufacturer's specs. GENERAL INFORMATION The REO Single Circuit Blasting Machines are of solid-state capacitor discharge design. They offer a wide variety of energy and voltage choices in a series of compact. Lightweight, portable, water and corrosion resistant enclosures, and are designed to provide extended service under a variety of operation conditions. FIRES UP TO 65 DETONATORS: Commercial or military. 2 ohm wired in a single series, 12 ohm max. lead line, based on 20 mj/ohm delivered in 5 ms. POCKET SIZE: 4.1" X 2.2" X 3.6" 10.5 X 5.6 X 9.0 cm) RELIABLE: Blasting machine will not fire or discharge until fully charged to design voltage. LIGHTWEIGHT: 10 oz. 0.3 kg. ENVIRONMENTALLY SEALED: Water and corrosion resistant delrin case. FAST CHARGE: 1-3 second ... morecharge time using one 9V alkaline battery. LONG BATTERY LIFE: Provides more than 150 charge-fire cycles. MILITARY RATED. NSN: 1375-01-417-7104 COLOR: Olive Drab ENERGY: 450 volts. 4 joules MODELS: CD450-4J
You are bidding on a Vintage DuPont No. 50 Blasting Machine. All original condition. The lever goes down smoothly and is in working condition. A s you can see. T he leather strap is missing and there are some minor cracks in the wood. The serial number is D23700C. Approximate weight is 21 pounds. Only shipping to continental US No returns and will ship within 3 days of purchase Happy Bidding
NICE! As I found it many years ago. The leather handle is broken on thr right side just above the two screws, plunger works fine. I've enjoyed being caretake for it, now it needs a new home. Sale will help fund my Ford Roadster project. Feel free to ask questions. FLAT Shipping& handling fee of $20.00 in the USA, I use FedEx Ground. Good luck, please check my other auctions
Here is a really decent old dynamite blasting plunger machine or exploder. It is a U.S. Engineers Standard 30 Cap Exploder made by he Fidelity Electric Company. Lancaster, PA. I am not sure of the actual age. It is 8 inches wide, 6-1/2 inches thick and 16-1/2 inches tall including the T handle. The original tag is intact and easily read. The box is wood with dove tail joints, is has been painted, which I believe is original, the original wooden T handle is in very nice shape as is the original copper wing nuts. The strap may not be original, I have seen others with leather carry straps, this machine has a thick rubber strap. The plunger may need a little lube, but it does pull out and push in ok. The last time I put a meter on it, it did produce an electrical charge. Just a really neat old item to display and talk about with friends, or even ... morelube up and use if you like. Please feel free to ask questions, check my other items if you like, I will combine shipping on multiple items when possible, thanks for looking.
Up for auction is this vintage Hurculese blasting machine. 1-30 caps. Good working condition.
Up for auction is a vintage Dupont No. 3 dynamite blasting machine. Handle has tape wrapped around it. The machine is in used condition. If you have any questions please ask. Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage United States Standard No 2 blasting machine in original condition showing some wear in working order. Small size measures 5 3/4 x 7 x 9 3/4 high, original brass tag, displays well Posted with
We are offering this vintage 1930's DuPont 10 Shot COAL MINER'S TWIST BLASTER by Fidelity Electric in Lancaster. PA. This item works great and has a Serial No. of X4756. Buyer pays actual shipping costs to be determined at close of auction based on weight. Dimensions of package and zip code. ESTIMATE on shipping weight will be approx. 7 lbs. and invoice will be emailed to the"lucky" buyer when auction ends with the Exact shipping charges due. NO OVERSEAS SHIPPING of this Item. You can check the USPS website for the ESTIMATED cost based on the weight above on your zip code and ours which is 17972. Our items are not packed until the auctions end. Payment in US Dollars and PA. residents add 6% sales tax. Please do not bid unless you intend to honor your obligation. Emails are sent out a day after the auction closes. If you ... moredo not hear from us within 3 days. Please try to contact us. We try to describe our items as accurately as possible, but do not hesitate emailing if you have any questions. Be sure to add me to your! Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas blasting box. The box is in good condition. Size 6 1/2 wide by 8 inches deep by 12 inches tall. That is the size of the box only not incliding the handle when the hand is out or extented. When pulling the handle up or out you can here the clicking mechinizm working. When you push it down you can here the generator in the box spinning. When pushing the handle down it is a little stiff. I think it needs oiled up as I am sure it has not been used for years. Overall the unit is in great shape. Will ship anywhere world wide at buyers expense. If you need more information or photos please ask. Thanks Kevin 848-992-1764
neat conversation piece just don't need it
For sale an ex Belgian army ZEB/C100S blasting machine. 100 cap/ 260 ohm capacaty. If you test it it works as it should(I worked whit the same type blasting machine in the army) but I never used it in any actual demolition. The Dutch governement is a bit squeamish when it comes to civilians blowing up stuff. SHIP WORLDWIDE FOR $0.01 somehow can't get this out of the system. It comes with a fashionable leather carrying case in the stunning color olive drab. The case is in a descent servicable condition. The strap for closing the top is replaced by a new one. With the blasting machine in this case you look lika a million bucks when you're out there on the demolition site. Happy bidding.
Excellent used United States Navy Blasting Machine. I believe this is WW2 or shortly after but not sure. I have used this many times and it works flawlessly. Unlike the Army or Marines. You don't see the Navy plungers very often. Powered by The free listing tool. List your items fast and easy and manage your active items.
Authentic and rustic looking replica blasting machine! Case crafted from a quality salvaged wood with a stain top coat to give it a rustic appearance. Steel shaft has a spring loaded up and down action. Leather strap and real brass contacts. Blasting machine available with optional realistic looking and feeling bundle of replica dynamite and 10' leads. Dynamite has a wood core and is completely non functional. Blasting machine and replica dynamite package is $149.00 If you want the package just drop us a note when you purchase the listing and we will adjust the sale price. Please check out our listings for individual sticks of replica dynamite with realistic. Real burning fuses. We do custon replicas and props. If you have and specific needs or ideas let us know and see if we can't put it together for you. All of our products are ... moresold as photography or stage props and MUST be used in accordance with your local laws! If you have zero or negative feedback. Please contact me prior to bidding or your bid will be removed. I ship to the continental US only. Thanks for looking! Feel free to ask any questions!
You are bidding on this old Explosives Detonator. Great patina and color. Height is 9 inches. Nice graphics. Screw threads appear to be in good condition. Battery cover screws down very tight and flush. 4"C" batteries are not included. I don't know if this will function after batteries are installed. Really cool display piece. I think the case may be made of a type of plastic, paint is chipping away as seen in picture. I have tried to describe the item to the best of my ability so please email me with any questions prior to bidding. All items are sold AS-IS with no returns. I will do my besty to get items shoippede ASAP after receiving payment. Please consider insuring any item purchased online. Good luck bidding
BLASTING MACHINE DUPONT SERIAL#R22648#30 WILMINGTON.DELAWARE IN ORIGINAL CONDITION SHOWING SOME WEAR IN GOOD WORKING ORDER COME'S FROM SMOKE FREE HOME THANKS FOR YOUR TIME IN LOOKING
DuPont Blasting Machine No. 50/Ser. Numbers Match#9082 Vintage DuPont Blasting Machine No. 50- E. I. DuPont De Nemours& Co. Wilmington, Delaware. These were used for mining of gold and silver in the Old West and in the coal mines of Pennsylvania many years ago. The device operates on the spinning energy created when you push down on the handle: a Powerful Jolt of Electricity is generated across the two big brass thumbscrews so*DO NOT HOLD THESE WHILE INSPECTING OR CLEANING THIS ITEM, AS YOU COULD GET A SHOCK! This version of Du Ponts' portable blasting machine, is capable of safely firing up to 50 caps w/accompanying 50 charges of dynamite. You are bidding on a DuPont No. 50 Blasting Machine in original very good unmolested condition and still has the leather strap. 3 copper tags, two on top and one in front with Maintenance Instructions, ... morewhich are all readable, and the two big thumb screws. The case is constructed with dove tail joints on what I believe to be an oak case with a brownish red paint that shows it’s expected scrapes and nicks. It has matching serial numbers on both the tag on the top and on the metal plunger, which is D16306C. I am also unsure of the year it is. The plunger/lever goes down with pressure. As you can see, the leather strap is intact and the large thumb screws are present. This will display nicely and is a great addition to a Gold Rush or a mining collection as well. I have not opened it up and do not know if it works or not. Would be good for the collector. Or for people mining gold, or whatever you want to mine. You would certainly need to oil, lube, dust,and test it. Most of the ones you see are missing the leather strap or thumbscrews. 9082 Any questions. Please ask before bidding. Approximate weight is 22 pounds. Shipping is 32.00 in US only. 100% Guaranteed authentic. Check out my other auctions for more interesting stuff and save me as a“Favorite Seller” I will be listing fresh material every week. The majority of my auctions will start at $24.99 or under. Many at $9.9
GREAT ESTATE FIND FROM HICKORY NC WOODEN DYNAMITE BLASTING MACHINE WOODEN PLUNGER/ DETONATOR I AM NOT FAMILIAR WITH THIS TYPE OF ITEM SO PLEASE ASK ANY QUESTIONS MEASURES APPROX 11 1/2 INCHES TALL X 8 X 6 1/2 BOTTOM WOOD IS DAMAGE AS SHOWN IN PHOTO 4 BUT COULD BE EASILY REMOVED GREAT DOVETAIL AS SHOWN IN PHOTO 7 GREAT DISPLAY PIECE SHIPPING IN US BASED UPON WINNERS ZIP
Offered here is an original antique blasting machine. Brass tag reads. In part"Atlas Blasting Machine No. 3-50.Atlas Powder Co.Atlas Explosives.Electric Blasting Caps. Measures 13.0 x 6.50 x 8.00. Appears to have had the original leather handle replaced at some point, as well as the wooden handle normally seen replaced with a small metal handle. Metal handle measures 4.50" long, with old tape wrapped around it and attached to the handle with a small cotter pin. Appears to be a replacement made while still being used. This machine would have been used in mining to set off as many as fifity blasting caps at a time, In great condition overall, and makes a dandy display item. These are normally missing the brass tag. Weighs about twenty five pounds. Thanks for looking!
Antique& Vintage Hercules Blasting Machine. Gold Mining Detonator Description This Antique Blasting Machine works. It has been cleaned up and serviced. But we have left the patina. Pull up on the handle and push down. You can hear the click, click, click. All parts are present. The brass name plate says, Hercules 50 Cap Blasting Machine, Maximum Rating: 50 Electric Blasting Caps with 30 Foot Cooper Wires. Connect Only in Series as Shown. To Fire: Raise Handle Until it Stops, then Push Down Quickly with Full Force. Hercules Powder Company, Wilmington DE. A great piece of Western and Mining History, but I would avoid taking it to the bank with you. Please take a look at the following photos for a better idea of condition and description before you bid. Contact us with any questions or for additional information. I am selling a large part ... moreof my brother's collection that he has put together for over 30 years. So please visit our store for many other great Western Collectibles we are listing weekly. Prev Stop Play Next News Our Yakima Canutt Hamley Saddle was featured on History Detectives in June of 2011[Episode 901. Story 3- Cannutt Saddle] Yakima Canutt(November 29, 1895– May 24, 1986) was a world class American rodeo rider, actor, stuntman and action director. Our saddle is now on display at Hamley& Co. in Pendleton OR. To learn more about our Yakima Canutt Hamley Saddle. Please visit the History Detectives website. Payment Due to the new eBay payment rules. We only accept payments through Paypal. After purchasing, pay instantly with your credit card through PayPal! All payments must be received within 3 days of winning auction or commitment to buy. Shipping Shipping prices are based on your country. We ship using USPS Priority Flat Rate and USPS Priority Flat Rate International whenever possible. All large items are shipped using USPS Parcel Post and at a fixed price for delivery within the US. We will quote additional methods upon request. However the shipping charges will be the responsibility of th
Up for auction is a vintage Atlas Blasting Machine No. 3-50. It measures 13" by 8" by 6 1/2" and it is in good working condition. With a little effort you can raise the plunger and push it down. You can hear it clicking when it goes up and something inside sounds like it is spinning when you push it down. I have not tested this to see if it has a current. There is an oil stain on the lower parts of a couple of the wood panels. It has some nice dove tail joints. All of the screws are present and this is a nice solid example of this type of machine. I welcome questions so please feel free to contact me. I combine shipping. Winning bidder to pay for shipping. International bidders please contact me before the end of the auction for shipping charges. Thank you for viewing my auction. Check out my!
U.S. ENGINEERS STANDARD 50-CAP EXPLODER MANUFACTURERS BY FIDELITY ELECTRIC CO. LANCASTER PA.HAS A DOVE TAIL BOX IN Used CONDITION DOES NOT HAVE LEATHER STRAP TWO SCREWS ARE MISSING ON THE TOP metal trim piece where the gear metal plunger goes down. freshly oiled and goes down with proper resistance and click clicks when up pull it back up very easily. two wingnuts. freshly lubricated and has good voltage output if you really want to use it. THE WOODEN HANDLE is a little loose. But intact and not split. there is normal wear on the sides, corners and bottom, a few small pcs of wood missing from 80-100 years of use! in used condition, functioning condition. FYI-after oiling both sides and the gearing, i removed broken pieces of leather strap and they have been discarded. nice piece of railroad, gold/silver, or coal mining from the old days. ... moregreat for a prop for a Western or Gangster. shipping is $29.99
ANTIQUE DUPONT BLASTING MACHINE NO. 5(GOOD CONDITION) This is a T-handle DYNAMITE Blasting Box that was used for detonating dynamite with an electrical charge. The case is constructed of solid wood with Dove Tailed Joints and appears as if it may have been re-varnished at one point. This DuPont Blasting Machine has embossed printing on two Brass Plates. One of the plates reads"DUPONT BLASTING MACHINE NO. 5 G.M. Will FIRE 1 TO 100 ELECTRIC BLASTING CAPS. and the other gives firing instructions. The Leather Strap may or may not be the original as the screws look newer. The Wing-nuts turn freely on the two terminals and the Plunger moves up and down with good tension with no chipped teeth to the gear. It may or may not have a charge as it has not been tested. This is a very unique item and measures 18" tall from bottom to top of the ... moreplunger and 14.5" from top to bottom of box. It is 9 3/4" long and 7" wide and weighs an astonishing 40 pounds. A fresh estate find. THIS IS A NO RESERVE AUCTION. PLEASE CHECK OUR OTHER AUCTION LISTINGS FOR FRESH ESTATE FINDS. Check out my! THANKS FOR LOOKING AND GOOD LUCK. Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Du Pont Blasting Machine Twist Blaster Mining Up for bid is a vintage Du Pont blasting machine. Twist the handle to generate charge. Measures 5 1/2" tall x 3 5/8" wide x 2 1/4" front to back. Comes with original wood handle key and leather strap. In working order. Generates charge. There is a crack on one side and is pictured. This detonator would be a great piece to add to your collection. Payment expected within 3 days of auctions end. Payment accepted through Paypal only. Feedback is important to me. As I am establishing my seller account. So if you are satisfied with my service, please leave positive feedback and I will do the same in return. If unhappy with any item received from me, please be sure to contact me so I can correct the problem before leaving feedback.
Here we have an original United States Standard No. 3 Blasting Machine. Which will fire 1-30 fuzes. It appears to be in very good condition. The machine is about 100 years old. The plunger handle moves freely and the original leather carrying strap is still in decent shape. The wood case measures 13 inches high, 8 7/8 inches deep and 5 3/4 inches wide. The machine weighs 25 pounds. Plunger shaft has a serial number 2398. The top brass plate reads as follows: THE UNITED STATES STANDARD No. 3 BLASTING MACHINE WILL FIRE 1 TO 30 FUZES DRAW THE HANDLE UP UNTIL IT STOPS THEN PUSH DOWN QUICKLY WITH FULL FORCE. 100% guaranteed original. Pictures below. As GST/HST registrants in Canada. We are required to collect applicable Canadian sales tax to sales within Canada. Foreign and US Sales are Sales Tax exempt. Sales tax as follows(please wait for invoice) ... moreAlberta(5% GST) Saskatchewan(5% GST) Manitoba(5% GST) PEI(5% GST) NWT(5% GST) Yukon(5% GST, Nunavut(5% GST) Ontario(13% HST) Quebec(5% GST) New Brunswick(13% HST) Nova Scotia(15% HST) Newfoundland(13% HST) British Columbia(12% HST) Shipping to Atlantic Canada may be slightly higher than posted.
For your consideration an antique Lion Blasting Machine. Fresh from a local estate. The machine is made of wood and has a metal plunger with a wood handle and brass wire connectors. The plunger moves up and down and works. The handle has resistance when pushed down and I can hear the mechanism inside turning. It measures 23" in height with the plunger up or 15 1/2" in height with the plunger down by 8 1/4" in depth by 6 1/2" in width. It weighs about 23 pounds. An excellent addition to any vintage scientific or antique collection or if you just want to own a really neat old blasting machine. I am selling this item with no reserve. If you have any questions or need additional pictures please feel free to email me. If needing pictures please send me your email address. Please check out my other items on Ebay. I will be happy ... moreto combine shipping when possible. Please allow one week for shipping. Thank you for looking and happy bidding.
Recently found here in Maine. An old circa 1920s Atlas Powder Company Reliable Blasting Machine No. 3- a/k/a Dynamite Blaster. Dovetailed mahogany case and box measures 13.75"H x 5.75"W x 8.25"D. With handle depreseed, height is 17"H. With detonating handle raised up, height is 26.76"H. Original estate condition now. It was stored away after its last blasting job many years ago and its condition reflects how it would have been found in the field. Leather handle is now fragile and there is also dirt and grime on the box asw ell as isolated nicks and dings in the wood. If you're a purist. This blasting machine may be for you. On the other, it could be easily cleaned and spiffed up if that is more to your taste. One of the nicer BLASTING MACHINES that I have seen. No out of country sale. Sale in Maine subject to ... more5% Maine Sales Tax.
Up for sale is a very nice vintage Hercules 50 cap blasting machine. This is a very nice example. The strap is intact, although I would not lift it by the strap as it is very old. The tag on top is in excellent shape. The handle is original and in great shape. The wing nuts are there. This item is complete inside and the handle moves up and down just as it should. This has been restored but in a fun way. Two sides have been stained darker while two sides have been left lighter. This way you can turn the machine to face out depending on your mood, so you actually get two in one. You can see the quality of this piece in the pictures and if you are familiar with these artifacts then you already know about Hercules. Also included in this sale is a full roll of annunciator wire No.18 B&S made by the Cornish Wire Company with the box still ... moreintact(but the top flap has came off but is included) This is a museum quality piece. Add it to your collection and you will not be sorry. Please feel free to ask any questions, and thank you for looking.
GENUINE DUPONT#30 BLASTING GENERATOR MACHINE IN ORIGINAL RED PAINT DOVETAIL JOINTS ON TOP AND BOTTOM HOLDING THE SIDES FRONT AND BACK ARE 1/2" OAK FACEPLATES THESE ARE EASILY REMOVED BY SCREWS TO PROVIDE MAINTENANCE IT IS 6 1/2 WIDE 8" DEEP AND 11 1/2" TALL NOT COUNTING THE HANDLE WHICH WHEN COMPRESSED ADDS ANOTHER 2 1/2" IT HAS A MAXIMUM CAPACITY OF 30 ELECTRICAL BLASTING CAPS IT HAS ALL THREE OF THE ORIGINAL METAL TAGS ONE OF WHICH IS THE MFG'S PLATE WITH DESCRIPTION, AND SERIAL NUMBER R21885. SECOND IS THE FIRING INSTRUCTIONS. AND THE THIRD IS THE MAINTENANCE INSTRUCTIONS NOW I AM NOT FOOLISH ENOUGH TO LICK A METAL POLE IN WINTER SO THEREFORE I AM NOT ABOUT TO GRAB HOLD OF THE TERMINALS WHILE SOMEONE PUSHES THE HANDLE DOWN TO SEE IF IT SPARKS. THERE IS A SMALL CHIP IN THE WOOD HANDLE AND OF COURSE THERE IS WEAR ... moreON THE CASE. SOMEONE OTHER THAN MYSELF HAD TAKEN ONE OF THE FACEPLATES OFF TO LOOK INSIDE AS YOU CAN SEE THAT THE HANDLE ESCUTCHEON PLATE HAS BEEN MOVED. THE HANDLE DOES GO DOWN HARD SO I WOULD IMAGINE THAT IT NEEDS REGULAR MAINTENANCE IN LOOKING AROUND OTHER SITES THESE SEEM TO BE VERY RARE AND QUITE EXPENSIVE BUT I AM REASONABLE AND WILL START THIS AT A REASONABLE PRICE NO RESERVE SHIPPING INCLUDES INSURANCE
Pull Up Blasting Machine#5"Will Fire 75 to 100 Holes" This is a large. As-found, un-restored early blasting machine which was recovered from a farmer's barn in northwest Ohio. I will attempt to be as accurate as possible in describing it's condition: 1) The dovetailed box is sturdy but shows evidence of rot on the bottom on one side(see photo#3) The wood appears to have most of it's dark. Original finish. At some places the finish is irregular and shows water staining. 2) The handle is original. The mechanism is stiff but generates a current. It would obviously benefit from being lubricated. 3) The metal flange at the bottom is broken into 2 pieces(as shown in the photos) It is rusty and has one significant chip(shown in photo#6) This is the flange that the operator must stand on with both feet in order to pull up on ... morethe plunger to generate a current. 4) Of the 3 electrical terminals located on top of the box. 2 have the original wing nuts. 5) The leather handle is broken and missing. The screw anchors for the handle remain in place and appear to be rusty but original. Please contact me if you have any specific questions which I may not have addressed. The bidding for this will start at $1 and eBay bidders will determine it's value. This is a heavy item. Shipping will be paid by the buyer and calculated once the shipping address is known. Please do not make payment for this listing until the shipping charges are calculated! Please review my feedback and bid with confidence! Thank you for your attention and interest! On Mar-21-13 at 12:17:35 PDT. Seller added the following information: Added 3/21/2013: Dimensions of the box itself are: 10.5 inches. By 11 inches, by 16.5 inches.
For auction is a Vintage/Antique Aetna Powder Company Lion No 1 Blasting Machine. Very Good condition. Measurements: appx. 11.5" tall X 5.5" wide X 8" deep weight 19.15 lbs. on my postage meter. The physical appearance is quite commanding/ striking. The blasting machine's strap on the top is broken in half.nicks. Scratches, scrapes and a few short cracks where the screws fasten the unit together. what you would expect from a working machine. Great color(not bleached out) nice detailing(dove tails) plunger travels up and down and to my eye the unit is all original. The blasting machine hasn't been tested so I don't know if it works although it appears to be intact inside. The blasting machine is being sold as is.please see pic as part of the description. Email any questions.
All original. Less the top of the leather strap. 18 inches tall, a big boy! DuPont model 4 blasting machine cap exploder for setting off dynamite from a distance. great piece of mining, construction, or railroad memorabilia. See pictures. I oiled it up so you don't have to. See interior picture. Complete and sparks! Shipping is $39.99 or so. It's not Light! Depends on your destination. Can refund overage on shipping. Kutie" or tape measure not included.
FOR SALE IS AN OLD DUPONT BLASTING MACHINE. DON'T KNOW MUCH ABOUT IT. ALTHOUGH IT APPEARS TO BE ALL THERE AND WILL MAKE A VOLT METER NEEDLE MOVE WHEN YOU TURN THE CRANK. SOLD ASIS MAY OR MAYNOT WORK AS ORRIGINALLY INTENED. SHIPPING CHARGE IS FOR U.S. ANY OTHERS MAY BE HIGHER. SOLD AS A NOVILTY ITEM AND I AM NOT RESPOSIBLE FOR BUYERS USE. PAYMENT DUE WITHIN 24HRS FROM END OF AUCTION. PLEASE USE PAYPAL. SHIPPING WILL FOLLOW ASAP AFTER PAYMENT IS COMPLETE. I RESERVE THEE RIGHT TO CANNCEL ANY OR ALL BIDS FOR ANY RESON. ASK ANY QUESTIONS FIRST.
The bid will be for this Antique 1900's HERCULES Coal Mining Detenator TWIST Blasting Machine marked SCHAFFLER'S SYSTEM B.D.K. on Bottom. BE ADVISED WE DO NOT KNOW IF THIS WORKS and you are buying"as is" with a NO RESERVE PRICE! Also. The entire machine was painted gold and nameplate is difficult to read. Buyer pays actual shipping costs to be determined at close of auction based on weight. Dimensions of package and zip code. ESTIMATE on shipping weight will be approx. 8 lbs. and invoice will be emailed to the"lucky" buyer when auction ends with the Exact shipping charges due. NO OVERSEAS SHIPPING of this Item! You can check the USPS website for the ESTIMATED cost based on the weight above on your zip code and ours which is 17972. Our items are not packed until the auctions end. Payment in US Dollars and PA. residents ... moreadd 6% sales tax. Please do not bid unless you intend to honor your obligation. Emails are sent out a day after the auction closes. If you do not hear from us within 3 days. Please try to contact us. We try to describe our items as accurately as possible, but do not hesitate emailing if you have any questions. Be sure to add me to your! Powered by The free listing tool. List your items fast and easy and manage your active items.
vintage Dupont# 2 blasting machine wood mining antique old Description vintage#2 DUPONT BLASTING MACHINE. As you can see it needs some help. It also seems like there is a gear missing to engage the magnetto with the plunger handle. there is a paper inspection tag on the inside as well. Buying as is so ask questions. Ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13dbeb2c0a4-0xf6-
For sale are 4 full size. REPLICA dynamite sticks 8" x 1 1/4" They are made out of wood wrapped with heavy grade brown paper, ends neatly folded and glued then given a coat of varnish. Looks like the real thing, over 400 sold on Ebay. The second photo shows the how the ends are folded over. Sold and shipped only to USA for novelty and display purposes only. Only 8 left in brown, I will be making them in red from now on.
Welcome to our eBay store You are buying and antique Dupont blasting machine number two. This is a very rare blasting machine in this quality and condition with all the plaques, as you could see from the pictures it is in antique excellent condition, all the original parts are seen in the pictures, this is a great rare find, this is my grandfathers and it has been in our family for over 80 years, please see all the pictures and if you have any questions please feel free to email me at anytime This item will ship within 24 hours after receiving payment Please look at our other auctions as we are selling hundreds of antiques Posted with
Here we have an original United States Navy Blasting Detonation Machine with Key. Made by Fidelity Electric of Lancaster PA. Comes with its original Key and leather carry strap. Works well and unit cranks. Nice original US Navy item! Pictures below. As GST/HST registrants in Canada. We are required to collect applicable Canadian sales tax to sales within Canada. Foreign and US Sales are Sales Tax exempt. Sales tax as follows(please wait for invoice) Alberta(5% GST) Saskatchewan(5% GST) Manitoba(5% GST) PEI(5% GST) NWT(5% GST) Yukon(5% GST, Nunavut(5% GST) Ontario(13% HST) Quebec(5% GST) New Brunswick(13% HST) Nova Scotia(15% HST) Newfoundland(13% HST) British Columbia(12% HST) Shipping to Atlantic Canada may be slightly higher than posted.
In 1878. H. Julius Smith invented the rack bar blasting machine, also known as a dynamite"blaster box. This is one of H. Julius Smith's original"igniting dynamo" machines. Patented in 1878, patent#201,296. To view an electronic copy of the patent on the United States Trademark and Patent Office web site. Copy and paste this enormous URL into your browser's address bar: http:patimg2.uspto.gov/piw?docid=00201296&PageNum=1&IDKey=897683277A58&HomeUrl=http:patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1%2526Sect2=HITOFF%2526d=PALL%2526p=1%2526u=%25252Fnetahtml%25252FPTO%25252Fsrchnum.htm%2526r=1%2526f=G%2526l=50%2526s1=0201.296.PN.2526OS=PN/0201,296%2526RS=PN/0201,296 The top of the box is a solid brass casting with a single patent date: March 12. 1878. The newer boxes more commonly listed on eBay have a small ... morebrass plate with two patent dates: 1878 and 1886. These are the second generation boxes with the terminals on the top. This is the original. First generation blaster box with the terminals on the side. Please review the high quality photos carefully for the condition. The plunger works. But it does not go smoothly the entire way. The metal and the teeth appear to be in good condition, but it sticks at a couple points on the way down. Nothing has been done to this machine. It is being sold as is, dirt and all. No attempts to clean or restore it have been made. The wood box itself measures approximately 5" x 8" x 13" It weighs about 25lbs. No returns on this item: please review this auction carefully before placing your bid. If you have questions. Please ask. I will do my best to answer. No international shipping for this item. Thanks. And good luck.
Exploder Dynamo Condenser- MK.2 WA-10761 Case is Black Bakelite canvas.Handle- case. Leather with brass winder.
Antique 3 post Reliable Blasting Machine No. 3. About 17in. tall to top of plunger.This machine has 3 posts rather than 2 like most. Don't know what purpose that serves.Bought this old blaster about 15-20 years ago, finally got around to scraping off the white paint.Other than scraping off the paint have done nothing to the machine.The plunger moves up and down just fine,there is a split in the wood on top of the case(photo)This would look really nice if it was refinished.Shipped with full insurance and packed carefully.
Atlas Powder Company. 10 shot blasting machine. Hand-held detonator/ blasting machine with nameplate of Atlas Powder Company of Wilmington. Delaware, manufacturer of explosives and chemicals. Used in mining and demolition work for detonating up to ten caps. Text on nameplate reads: Atlas Powder Co. No. 2 Special- Turn Quickly with Atlas Explosives logo. Text stamped into base reads: Schaffler’s System B.D.K. with a serial number. Nickel-plated brass. Original key with wood handle. Condition: Body has two shallow dents near base and a bigger dent on the underside. Nickel plating in very good condition with some thin areas. Leather strap is old. But probably not original equipment. Detonator is in working order and generates current. Purrs like a kitten. Dimensions: stands 13.5 centimeters high(without the handle)
Scroll Down for More Photos and Description Vintage Annunciator Wire Roll. Unused Note: This is NOT explosive or dangerous. It is just a roll of wire. It is being sold as a collector's item and is not being sold for use. 4-1/8" Diameter x 1-1/4" Thick Please Read all Terms Below Before Bidding: See our"About Me" Page for Shipping Details. Terms& Policies Non-U.S Buyers Welcome. But must Read the International Shipping Terms_ Your Package is Covered by Postal Insurance! Insurance& Delivery Confirmation on All Items. Always! Save all Packaging and Contact Us Immediately if Something Arrives Damaged. Payment Terms: Payment is due within 7 days after the auction ends. We Do Accept PayPal(please contact us with any questions about payments) We also accept payment by cash IF YOU ARE PICKING THE ITEM UP IN PERSON ... moreby prearranged appointment. but payment is still due within the 7-days of auction's end even if pickup is later. We can only ship items to the address in your ebay/paypal account. Per ebay buyer protection policy* We CANNOT accept PERSONAL OR BUSINESS CHECKS EVER; no exceptions* International Buyers are very welcome& valued(if the item is able to be shipped to your location) Internation shipping is expensive because ebay/paypal buyer protection requires tracking on all items. But we will gladly refund any difference if we can get the shipping to cost less than the automatic quote. Your address in your eBay account MUST match the address on your PayPal account and this is the ONLY address we can ship to. Please see the info about International Shipping cost on our"About Me" page: click here Your Bid is Legal Contract per the eBay user agreement and is bound by the terms stated in the listing and on the" About Me" page Powered by The free listing tool. List your items fast and easy and manage your active items. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13de6ca5b04-0xfd-
Quality new and used industrial parts at an affordable price! Pressure Blast Wet Abrasive Blasting/ Cleaning Machine with Agitator 110 Vac Move mouse over images to see larger version Click to view supersized image This is a USED Pressure Blast Manufacturing Wet Abrasive Blasting/ Cleaning Machine. This unit is a two compartment system using the first compartment to blast/ clean the product and the second compartment to"blowoff" the material. It is equipped with 4 Blasting Guns mounted on a moving cylinder to oscilate the wet abrasive material evenly over the part. There is an agitator unit inside the hopper to keep the blasting material suspended in the solution. This unit was previously used to clean a mylar film material. The roll was placed at the front of the unit and threaded through to a receive roll at the exit of the machine. ... moreIt can be used for a wide variety of materials and configured differently for your needs. I have listed the individual compartment measurements and included pictures so you can determine if it will work for you. We have a great feedback score so buy with confidence! Blast Cabinet Width, 36" Blast Cabinet Height, 28" Blast Cabinet Length, 24" Machine Width, 63" Machine Depth, 61" Blow Off Cabinet Width, 34" Blow Off Cabinet Height, 26" Blow Off Cabinet Length, 24" Voltage, 110 VAC Single Phase, Air Consumption, 140.2 CFM@ 80 Psi, We carry a wide variety of Industrial Automation. Process Controls, Material Handling Equipment, Machining Equipment, Electrical, Power Transmission, Hydraulics, Pneumatics, PLC, HMI, etc. You will reconize many of the brands such as Allen Bradley, Omron, Banner Engineering, Sick, STI, Siemens, Mitsubishi, Emerson, Turck, Effector, Fanuc, Motoman, KUKA, Square D, Cutler Hammer, Keyence, Festo, SMC, Vickers, Parker, and many more! Be sure to check our our store! We list new items everyday. INDUSTRIAL PARTS R US INC. will guarantee all items for 60 days from the date of delivery(see our terms and conditions) We
here for all you wile e. coyote fans out there is the actual plunger used in those warner bros. cartoons. Autographed by wile e. hisself, nope just kidding, what we have here is a 50 cap blasting machine that was used for mining there is a brass plate attached to the top that has a couple of minor dents that states the brand, capacity and also that this is good for 8 feet of iron wire or 30 feet of copper wire, the plate has a globe on it and if it and the wingnuts for the wires which are also brass were to be polished they would provide a nice contrast to the plunger box and give some class to that manhole or cave, the red paint is faded and old and the box itself has cracks from age as well as minor pieces missing, but this is to be expected from an aged veteran of a mans dreams for wealth, the plunger itself readily goes up and down and ... moreone can hear as well as feel a wheel turning inside the box as the plunger is quickly depressed, although i am uncertain if it generates electricity, there are the remnants of a leather strap that once was used to carry the plunger but the main part has long since been on the waste pile, here is a pretty cool piece of american history that you can own. the box measures 6 1/2 by 8 by 13 inches high
Wheelabrator brand wheel blast machine. 6 station multi-table made of abrasive resistant 5/8" thick, 13% Hatfield Manganese steel. Cabinet is free-standing(footprint 7' W x 9' D x 17' H) with a dust tight cabinet and integral hopper/conveyor system beneath the blast cabinet to recycle the recovered shot. The table is 37" in diameter and is made of 1/2"thick steel with 3/8" manganese plate liners, with 6 individual shot chambers(4" back wall X 14" walls X 18" front circumference X 48" chamber height) These chambers can be modified down to 3 chambers by removing the interior walls. There are two 12" wheels, upper and lower, driven by 15HP, 3600 RPM AC Motors and Allen Bradley variable frequency drives. A new replacement 15 HP motor comes with the system. The unit is equipped with an automatic ... morefill bucket elevator for shot circulation. Shot metering is regulated by Magna Shot Control 250-P valves controlled by the PLC unit. Unit PLC Controller accepts 6 menus to control shot flow and timing and comes with a screen monitor. This unit was used to surface treat aluminum tubing for about 2 years before being removed due to market conditions. The system was mechanically sound and in good operating condition when removed from service. The entire system was purchased for over $400.000 in 2001 and has been stored in a warehouse since removal. Company no longer needs the system and is moving its warehouse out of CA. Buyer will be responsible for rigging out of the warehouse. Loading and transportation from the Ontario, CA warehouse. Truck level loading docks are available.
Capacity Discharge Blasting machine. I'm confident it works as most of the CD units will. It will need work as one of the securty screws that hold the bottom to the top is stuck and I haven't the right tool for it. This type is easy to control as you hold down the button to charge it is has an LED or Neon light that will light up to let you know you have a charge to set off. The other button is the fire button. It has cinch wire holders and will ignite 20 shot at 25feet of steel wire.
Detailed Description as follows: Comprises a dynamo operated by turning a handle. The AC voltage generated is stepped up by a transformer. Rectified, and used to charge a condenser to a potential of not less 1,200 volts. When the firing button is pressed, the condenser is discharged through the firing circuit, firing the shots. Suitable for use in tunneling operations. Quarries, etc. for firing up to 100 shots in a series. It is also suitable for firing up to 4 x 50 detonators connected in parallel-series circuits. Special tester is included using a very thin"expensive" platinum wire. Operational guide/folder also included. Approximately 12 x 7 x 6 inches. Leather-covered cardboard case in fair condition(surface marks and corner damage as seen in photos) Machine is good(see photos for markings) and in working condition. Recently ... moretested by a blasting contractor. Please contact seller if further information is needed. Thank you.
blasting machine in original condition showing some wear in working order. Small size measures 5 3/4 x 7 x 9 3/4 high, original brass tag, displays well.
Antique United States Standard Blasting Machine. All info provided on this item has been obtained from the previous owner. And is believed to be accurate to the best of my knowledge. This piece is believed to have originated in the 1920's- 30's, and was purchased in a lot of miscellaneous tools from a construction/excavating contractor in the state of Pennsylvania. The wooden box itself has been professionally recrafted in recent years, due to the fact that the original casing was aged beyond refinishing. The new box was created by a professional cabinet maker, to the exact original specifications, down the very last detail, including the dovetail joints. The item was then reassembled exactly as it was. The leather strap is new as well. All other components of the machine, inside and out, are original to the piece. All hardware on ... morethe outside of the machine, down to the very last screw, has been polished, restoring the original finish. The ratcheting gear system operates smoothly, and the machine is in full working order, discharging an electrical current as the plunger is depressed. This item makes a great conversation piece, and is definitely one of a kind. It has been proudly and carefully displayed in my home for the past 2 years, and remains in beautiful presentation condition. Dimensions: 17x9x6; Weight: 26 lbs Posted with
Airless Shot Blasting Machine Perterson Machine AB502B Shot Blaster Ampro We had just bought a shop and this machine where in there and we already have are own so this a great single phaze 220 volt machine you can you in your garge or shop to clean engine blocks and much much more THIS IS A MONEY MAKER! fast and clen SUPER EASY
BLASTRAC 1-8 DEZ SHOT BLASTER SHOT BLASTING MACHINE 120V#2 BLASTRAC 1-8 DEZ SHOT BLASTER SHOT BLASTING MACHINE 120V. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ... moreARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
For restoration a 10caps blasting machine. SN: X 70326. Fidelity Electric CO. Lancaster.PA. Happy Bidding
ANTIQUE ATLAS POWDER COMPANY No. 3-30 BLASTING MACHINE. a RARE ESTATE FIND in working condition. plunger and brass terminals move freely. checked with test light and everything works. plaque reads ATLAS BLASTING MACHINE N o 3-30 ATLAS POWER CO. WILMINGTON DEL. ATLAS EXPLOSIVE CAPACITY 30-30 FT. COPPER WIRE ELACTRIC BLASTING CAPS. ORIGINAL plaque in very good condition.dovetailed solid oak case in good condition.wood case is 11½" x 8" x 6½" plunger sticks 2½" above case and moves 5½" leather strap is broke but left it and screws for you. Great example of early mining and construction field use DYNAMITE DETONATOR. Don't miss out on a great piece of history. PLEASE SEE PICTURES.
This is a great Stafford Springs CT collectable! It is an old Dynamite Detonator marked B Campo. Wood with dove tailed top and bottom corners. Appears complete. The handle does depress down. A very early item. Real nice shape for age. Metal plate on front explains how to use. On all sides of the box it is marked B Campo. Which stands for Ben Campo. Ben Campo died at the age of 66 in 1941. So this blasting machine is quite old and has quite a bit of Stafford History attached to it! If you live in the area and want to save on shipping. This item may also be picked up! What you see is what you will be getting. The fine print: I ship worldwide. International buyers contact me for shipping costs. I take paypal payments only in US dollars from International buyers. Also note. I put on the customs forms the amount paid for the item, so please bid ... moreaccordingly. I WILL NOT put on customs forms that the item is a gift! When you receive your item and if there is a problem. Please email me immediately to give me a chance to correct the problem. I aim to please my buyers, but only if you give me the chance. When you are satisfied with the transaction please leave me positive feedback and upon receiving your feedback I will leave you positive feedback. If you want to insure your item. Please let me know. I am not an expert on this item! I am listing it as I see it! All buyers: Payment should be made within 10 days of auction ending. I do everything in my power to make sure that our transaction is satisfactory to you. I take PAYPAL only! Overseas buyers USD please! PLEASE EMAIL ME IMMEDIATELY WITH ANY PROBLEMS! I take returns. Please email immediately when you receive your item if there is a problem. I will reimburse you. Your winning bid, plus original shipping fees once I receive item back. I ship world wide unless otherwise stated! Add to Favorite Sellers. Other Items. Feedback. Contact. About Page. Txzj pxzj2547 txzj5 txzj107
I am told this a"genuine leather" carrying strap produced and reproduced for a WWII US Army Navy Blasting& Firing Machine. The leather strap is 16 inches long 3/4 inches wide from 1/8th inch thick leather. It is actually twice the thickness of a dime. Not sure how old this thing is. But it looks like it has been used some however it is not really cracked or rotten in any way. It is strong and looks as if it has a lifetime of good service ahead of it. There are holes like button holes on each end where it hooks to the sides of the machine and the sides of the leather were embossed with an edge that can be seen in the right light. The second picture shows the strap on a blasting machine. You get only the strap in pictures. Not the machine or anything else in the pictures, just the strap. You can google Oklahoma Vintage Guitar ... morefor the very fastest contact information to get answers by email for the owner of the company. During store hours you can call us at Oklahoma Vintage Guitar toll free at 888-422-0788 from 10 AM to 5:30 PM Central Time Monday through Friday and 10 AM to 1 PM Central Time Saturday and we can take your info over the phone and get your order out to you as soon as possible. If you want to use Pay Pal. I can send you a Pay Pal invoice. Let me know if I can answer any further questions. Bobby, Oklahoma Vintage Guitar El Reno OK
Lion#3 Blasting Machine made by The Aetna Powder Company(Chicago Illinois U.S.A. This piece of history is Rare and would make a great conversation piece for the house. Every thing is in tact just a little weather checked from being in a barn.
1 I am retired from the USAF. This is the non-profit Christian thrift store I work for and selling for. The pictures I posted are not doing justice. I'll take better and post on Friday) We are a super small county in the Blue Ridge Mountains of NC. County population is only 9700. At times we get a donation that will not bring actual worth in our thrift store. Thus I step in and sell for them. I am VERY proud to work for these folks. 6 years this year) Last picture will give you some insight where the money goes. For the age this is in very nice shape. No rust to speak of. Small bit of wood wear on bottom corner. Leather handle missing(however screws there) Other than that pictures should show the condition. You are looking at a Dupont Blasting Machine No.10#10 means it's meant for blasting 10 mining caps at once. It is in very nice ... moreshape for its age. HANDLE IS MARKED'1A 1991' The handle does go up and down and it does mesh with the gear on in the inside. The leather strap is broken on both side's however attach screws are still there. Need more pictures just Email me. May take a day or 2 to get back. Item is at work. Weighs in at 18 pounds. If I over charge for shipping by more than $2 I will refund the difference. On May-24-13 at 14:35:49 PDT. Seller added the following information: Item has a bid so Ebay will not let me load new and improved pictures. If you care to have full blown pictures taken in the sunshine. Just Email me through Ebay with your Email address and I'll send you 8 very detailed pictures.
Antique H. Julius Smith Dynamite Ingniting Dynamo Blasting Machine 1878 1886 H Julius Smith's Igniting Dynamo Patd. March 12. 1878, Patd. Dec. 7, 1886. Julius Smith invented the dynamite plunger in the 1870's, coming up with the idea of a copper coil that would generate electricity when a plunger was moved, to set off blasting caps set into a charge of dynamite or other explosive. Measures 13.0" tall x 8.0" deep by 5.25" wide. In excellent condition. Plunger moves easily.
Antique Tadco Australian Blasting Machine Dynamite Plunger dynamo 30 Caps 1930s Fantastic old Dynamite blasting Machine. It works! I hooked it up to a 60 watt light bulb and when plunged it glows for a second. It is made to blast 1-30 dynamite caps. It has a heavy duty dynamo with brushes inside which in powered by the teeth on the plunger and the geared mechanism which produces the electricity needed to blast the caps. There is a trigger mechanism at the base which fires the charge when the plunger reaches the bottom. It has a label inside which says Tadco Australia. 229-231 Burwood rd Hawthorn. They operated in the 1930's- 1940's so its a WW2 era machine. I'll take further photos of the inside soon Perfect for a man cave or blowing stuff up. These days you could do the same job with a decent battery but this is heaps more fun. ... moreAny queries please call Arron on 0425771894 Pickup from Mordialloc Welcome International Customers paypal. Thank you for looking at this auction. I have a number of other items on Ebay so please do take a look at them. If shipping charges are not listed High bidder should send their address after the close of the auction to allow me to calculate shipping charges. I estimate for small items. But I need to check your address and figure in insurance for larger items. I am very fair with shipping charges and I will combine shipping on multiple orders. 1. Refunds and/or exchanges are handled at the discretion of the seller. We encourage you to bid responsibly and do your research as we do not offer refunds in cases where the buyer changes his/her mind. All shipping costs as a result of approved refunds will be covered by the seller in all cases. 2. No responsibility is taken by Arete-Antiques for damage of goods in transit. All care is taken to package and send your item to your specified location. However we cannot guarantee the way your package is delivered or handled by the appropriate postal service. Therefore we encourage you to take out insurance for an additional charge in o
Antique Atlas Blasting Machine No.3-30 Atlas Blasting Powder Co Wilmington DE Dynamite Plunger Fantastic Estate Piece! Good overall condition as shown! Makes quite the dramatic display piece and just a great addition to your collection! Some screws missing as pictured but otherwise this piece is just awesome. The plunger works smoothly and gears turn just fine. Heavy oaken box measures 6.5x8x11.5 with plunger 2.5" above the box top. Nice brass maker plate attached as shown. Don't miss your chance on this one! Get a preview peek at all of my eBay listings by following me on Facebook! I'll upload photos to show you what's in store for you each week! Check out my other items! Be sure to add me to your favorites list! Please know that I list honestly each and every item. Most of the items that I sell are vintage. Formerly used ... moremerchandise and will have natural age and wear. I will point out any major flaws or deficits in the item listing. I want you to be a satisfied customer and look forward to your return to Witcher Creek Vintage. Thank you so much for stopping by. Browse around and shop to your hearts content! I appreciate your business! Special Note: Unless Otherwise Specified As Flat Rate Charges. Shipping Calculator is included in my listings for your convenience! All shipments will be packed with careful consideration! Fragile pieces will receive even more item appropriate packaging. I insure all Fragile shipments(at my expense) and in that respect it will become your responsibility to file a claim with the appropriate agency if damages are discovered upon receipt and delivery of your package. PAYMENT IS EXPECTED WITHIN 24 HOURS OF AUCTION ENDING. IF YOU CAN NOT FULFILL YOUR PAYMENT OBLIGATION. PLEASE EMAIL PROMPTLY! EBAY WILL PROMPT ME TO FILE AN UNPAID ITEM CLAIM WITHIN 4 DAYS OF NON-PAYMENT. A CLAIM WILL BE FILED AFTER THAT DATE IF PAYMENT IS NOT RECEIVED AS PER MY STORE POLICY. I HAVE CLIENTS WHO ARE PATIENTLY WAITING FOR PROCEEDS FROM THEIR SALE AND LATE PAYMENTS WILL NOT PERMIT ME TO PAS
THE A B C OF MINING A HANDBOOK FOR PROSPECTORS This auction is for an original 1898 edition of" THE A B C OF MINING- A HANDBOOK FOR PROSPECTORS" by Charles A. Bramble. Published by Rand, McNally& Company of Chicago and New York. What a wonderful handbook for Prospectors! This book fully treats the exploratory and preparatory work of the physical properties of ORES. FIELD GEOLOGY, the occurrence and associations of MINERALS, METHODS OF CHEMICAL NALYSIS AND ASSAY, BLOW PIPE TESTS, PROMISING INDICATIONS, AND SIMPLE METHODS OF WORKING VALUABLE DEPOSITS, together with chapters on QUARTZ and HYDRAULIC MINING and especial detailed information on PLACER MINING, with an addenda on Came Life and Medical Hints. Owing to recent rich discoveries in more than one mining field. Hundreds of shrewd, intelligent men without experience in prospecting ... moreare turning their attention to that arduous pursuit- to such this book is offered as a safe guide. A complex subject has been treated as simply as its nature permitted. And when a scientific term could not be avoided, the explanation in the glossary has been offered. This book a lso contains medical hints. Camping hints, and many mineralogical tables and data. THE FOLLOWING CONTENTS INCLUDE: PROSPECTING HOW TO TEST FOR MINERALS BLOW-PIPE TESTS ECONOMIC ORES AND MINERALS MINING CAMP LIFE SURVEYING FLOATING A COMPANY MEDICAL HINTS DYNAMITE ATOMIC WEIGHTS ODDS AND ENDS GLOSSARY This book is packed with a wealth of the most interesting information. Especially in the"ODDS AND ENDS" CHAPTER. Published in 1898. This book is in GOOD CONDITION for its age; especially to be 115 YEARS OLD! There is blemishing on the exterior covers and light foxing or blemishes inside the interior content pages. On the right side of the bottom corner cover. There is some rough edges with bowed corners. Otherwise, the hinges are in good order, the binding is strongly bound, the text block is neat, unmarked and clean! There are 183 pages in this 4 1/2" 6 3/4" volume. This RARE copy
Here is a rare RARE ANTIQUE WW2 US NAVY BLASTING MACHINE/ FIRING KEY/ DETONATOR MILITARY. WW2 US NAVY/ BU OF ORD. FIRING KEY MK: 27 Mod: 0 This unit comes from private collection and have always been kept with extreme care. THE UNIT HAVE BEEN TESTED WITH MULTIMETER AND IS PERFECTLY WORKING. WHEN KEY USED AN ELECTRIC IMPULSION IS DISCHARGED. Function meticulously tested, everything is working fine. Unit will be packed with extreme care I will pack this for war. I know how to make it smooth and secure. This unit will be professionally packaged secure travel. I know how to pack them, no worry. I will ship DB Schenker for oversea if needed. LOOK AND SUPERSIZE EACH PICTURES TO SEE THE CONDITION! Winner pay actual shipping cost plus packing fees. About 25$ for USA, 15$ for QC& ON, around 65$ WORLDWIDE via express airmail. I charge real price ... morepaid. I'm not in the business of making2money on shipping. PICKUP IS ALLOWED BUT I SHIP ANYWHERE. WORLDWIDE. Please ask for rates. ITEM WILL BE PROFESSIONALY PACKED TO SURVIVE ON ANY TRIP! I DO AWESOME BLASTPROOF PACKAGING. CHECK MY FEEDBACKS. BID IN CONFIDENCE FROM A TRUSTED EBAY SELLER SINCE YEARS. Terms and guarantee; The item currently on auction is described with the best of our knowledge. We make business on Ebay since many years, We try to be honest as possible in our grading. Please check on my feedbacks on high-priced items. Due of the age, this item is sold'AS IS' sales are final, no return or refund. The item that is on auction is the actual item in our possession. Pickup always welcome and inspection of the item is available to you. Payments& Shipping; Paypal is more than welcome in every auction. If You need other method. Please contact me first. Due to the volume, we only ship out once a week so please be aware. If you have any specific shipping instruction or any other concern, please let us know, We will do our best for you. I can be reached at(819) 314-6286. All duties and local taxes are the responsibility of the recipient of the good
Rare wood-cased blasting machine from the Star Electric Fuse Works of Wilkes-Barre. Pennsylvania. Has very nice cast brass nameplate. The Star Electric Fuse Works of Wilkes-Barre. PA appears in the 1904 Catalog of the St. Louis Exposition Department of Mines& Metallurgy as a manufacturer of fuse, caps and electric blasting apparatus. When is the last time you saw a blasting machine from this manufacturer? Wood case measures approx. 12 1/2" tall x 5 1/4" x 7" and weighs approx. 14 1/2 lbs without packaging. Handle pulls up and pushes down as it should. Makes the right sound when handle is pushed down. Has wear. Scratches and nicks in the wood as expected from underground use but it still shows well as seen in the photos. Used but not abused condition overall. Great original mine blasting item from a rarely seen manufacturer. ... moreCheck my other auctions for more mining items. PLEASE READ TERMS AND DESCRIPTION. AND VIEW PHOTOS" ALL ITEMS ARE SOLD AS-IS. PLEASE REVIEW CONDITION PRIOR TO PLACING A BID. AS I DO NOT ACCEPT RETURNS ON THIS ITEM UNLESS THE CONDITION IS SIGNIFICANTLY DIFFERENT THAN THE ITEM RECEIVED. PLEASE NOTE THAT I AM SELLING OLD VINTAGE ITEMS WITH YEARS OF USE AND/OR WEAR ON THEM. I DO MY BEST TO POINT OUT ANY FLAWS WITH AN ITEM, BUT YOU MUST ASSUME A BASELINE OF WEAR TYPICAL OF VINTAGE ITEMS. A BID ON THIS ITEM VERIFIES THAT YOU HAVE READ AND UNDERSTAND THE ENTIRE AUCTION, AND AGREE TO ALL TERMS AND CONDITIONS. BUYER TO PAY SHIPPING AND MANDATORY DELIVERY CONFIRMATION COSTS. WHICH WILL BE ADDED TO THE INVOICE. I RESERVE THE RIGHT TO VOID THE SALE SHOULD BUYER NOT CONTACT SELLER WITHIN 3 DAYS FROM END OF AUCTION. FULL PAYMENT IS DUE WITHIN 3 DAYS OF END OF AUCTION. NO ECHECKS ACCEPTED. PLEASE"DO NOT" ATTEMPT TO PAY FOR ITEM UNTIL INVOICE SENT AT CLOSE OF AUCTION OR PAYMENT WILL NOT BE ACCEPTED AS PAID. THIS AUCTION IS SUBJECT TO FORFEITURE IF FULL PAYMENT IS NOT RECEIVED WITHIN 3 DAYS F
Selling a Power Blast 24D13 Roadabrator Portable Shot Blast Machine. Powered by a 1998? Model John Deere 855 Compact Diesel Engine Tractor. 24 HP with Low Hours. Rebound Abrasive Reclaim. Hydrostic Drive, Hydraulic Blast Head Lift, Onboard Dust Collector, 13' Blasting Width, Totally Self Contained.
Home ~ Affiliations ~ Discounts ~ FAQs ~ Grading and Certification ~ Premium Shipping ~ About Us VINTAGE ART& ADVERTISING CURATED COLLECTIONS 1891 Article Rock-blasting Electric Firing System Methods Machine James Macbeth Details Year: 1891 Type: Original Print Article Grade: Very Fine + Authentication: Dual Certificates Image: Black/ White Approximate Size(inches) 9 x 12.25 Approximate Size(cm) 23 x 31 Description and Condition This is an original 1891 one-page print article"Rock-blasting by Electric Firing" with four halftone illustrations of the machine and methods employed in the electric system of rock-blasting; manufactured by James Macbeth and Company. 128 Maiden Lane, New York. Fig. 1 shows the holes connected in series. Fig. 2 shows the Victor Electric fuses for exploding all grades of blasting powder and high explosives. ... moreFig. 3 shows a machine testing the battery. Fig. 4 shows the standard electric fuse and blast tester. CONDITION This 120+ year old Item is rated Very Fine +. Moderate aging in margins. No creases. No natural defects. No surface rub. No tears. No water damage. Please note that there is bleed through showing in this article. To find other items from this specific collection in our eBay store. Please. MAB1A12C91 102563_MAB1_593 Product Pricing& What We Deliver At times we receive inquiries about our pricing. Especially for vintage advertising or historical halftone prints, and are asked why our prices are consistently higher than some other sellers of similar items. For the first five years of our business, we asked our primary consumer base what they wanted. Our primary consumers- historical societies, historians, archivists, curators, university professors, historical decorators, and collectors, etc. have diverse and specific needs and we've built our business to accommodate those needs, like no other seller worldwide. Below is what is unique about how and what we offer as the world's leader in print ephemera: Product Packaging. Every product is placed against c
Antique Plunger Detonator from France. Found it in a Land surveyor home. Made of Wood and bakelite with a leather handle. Still Contains an antique battery! 7 x 4 x 4 inches Used condition as you can see on my picture. Better that a too short description please take a look at my 5 large pictures. Please scroll down) We ship worldwide from France for 18 US$. Secure package garanteed. Take a look at our feedbacks. Feel free to ask more details or picture. You are welcome! We ONLY take paypal. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f8dfbf236-0xf6-
original WW2 10 cap blasting machine. made by White Rodgers electric company. good shape overall with a nice patina. leather strap is not good. but original. blasting machine still makes good current.
I have this listed in this category but I have no idea of it's actual vintage. The machine is in fair condition with approximately 50% of the original paint on the body. There is one small dent- lower left of pic 1. About 1/8' diameter. The strap is supple and intact. The handle spins a"something" inside and sounds vaguely familiar. The wire terminal nuts turn freely. The paint on the handle is mostly intact and shiny. The swivel link, for the lanyard, on the removable handle has been replaced with a piece of wire. TYPE 6907 NO 1 SERIAL NO 40897.
This auction is for an REO Blasting Machine that is used by both the military and mining companies; it's an electric blasting cap detonator. This item has definitely been used before but it is a great collectors item.
ALL NON PAYING AUCTION WINNERS ARE REPORTED TO EBAY! Please take the time to view my other auctions as i will combine shipping where possible. I have another FIDELITY WW2 VINTAGE S ARMY 10 CAP BLASTING MACHINE for your bidding. The last one i had sold for $275 here and this one is in way better condition than that one. Comes with key and still works. Tested with meter and still puts out a charge. Absolutely fantastic piece. Please dont not hesitate to ask questions. I do ship international but be aware i ONLY SHIP USPS PRIORITY MAIL TO COUNTRIES WHERE THERE ARE NO POSTAL ISSUES and i have a $5.99 handling fee to cover time and costs assciated with dealing with the Post office as these packages have to be handed to the post master for security issues.
HERCULES MIDGET BLASTING.MINING MACHINE WITH KEY. Condition is Fine to Fine+ or better. Blasting machine is 4" tall to top edge, 4-1/2 including 2 knobs on top. Guaranteed old. Original and authentic. Opening bid is $99 with NO RESERVE! Buyer pays shipping fee $10, includes priority with insurance and tracking confirmation. NOTE.PURCHASE MUST BE PAID FOR WITH PAY PAL.Please remit within 5 days or non payment will be reported to ebay. Sorry, but in our 15 years, winning bidders who don't pay within 5 days, usually don't pay at all. NO INTERNATIONAL SALES. THANKS FOR LOOKING! Powered by The free listing tool. List your items fast and easy and manage your active items.
Thanks For Taking The Time To Visit And Consider Our listing.It's Very Much Appreciated! Important Bidding/Buying Information Related To This Listing; We Have Done Our Best To Describe It In Detail;However. This Is A Used Item And In Our Opinion A Good One;However, Opinions Can& Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying& What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit& Inspect It Yourself In Person;However.Should This Not Be Possible Or Practical Please Review The Photos& Ask As Many Questions As Possible So You Know What To Expect When It Arrives! Notice; This Has Been.Inspected And Tested For It's Function Only.We Can Not& Do Not Determine If It Meets Any And/Or All Safety Issues ... moreAnd/Or Concerns With Regards To The Machine, It's Installation,Operation& Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details& Specifications(1) Pre-Owned Ruemelin Model 2030 Compact Sand Blasting Machine/Cabinet W/Built In Dust Collector Electrical- 110 Volts.1PH,60Hz Approximate Overall Size- 36"x48"x69" +/ Estimated Weight- 400 lbs +/ Complete With; New Gloves Built In Dust Collector Fixed Nozzle"Can Be Disconnected" Cabinet Size- 20"x30"x24"h This is a heavy duty sand blaster unlike many of those light weight machines and it has it's own heavy duty dust collector! SPECIFICATIONS Overall Height 65-1/2" Overall Width 36" Exterior Depth 34-3/4" Door Opening 16" x 23" Window Size 8" x 12" Inside Dimensions 20 x 30 x 24 Weight 400 Lb. Air Jet 3/16" Orifice Nozzle Ceramic 3/8" Orifice OPTIONAL EQUIPMENT Pressure Regular Factory Wiring Package Type"C" Blast Gun Air Jet 1/8" 3/16" 1/4" Nozzles Ceramic 3/8" O
blastrac
NELCO COMPACT PORTA SHOT-BLASTING BLAST MACHINE MODEL EC7-2. This small. Lightweight, 2 HP Porta-Shot Blast machine works with either 110v or 220v 1 phase power. HOUR METER DOES NOT WORK. PLEASE LOOK AT THE PIC'S FOR MORE INFO AND COND. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO ... moreNO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
Nice looking and all original.Unrestored and uncleaned condition early 20th century small size mining dynamite blaster device.small size detonator thats missing the outer case-may have been wood or matal,complete with terminals,inner works that are visible and original key.there is no makers name or labels.its in good structural condition overall- has wear from use with old finish.its a little grungy and needs cleaning from being stored away in a barn.vintage mining apparatus measures 4" x 4" x 2 1/2"will clean up and look and display well. guaranteed old and authentic.Shipping is via USPS in US only…always glad to combine on multiple buys when possible Powered by The free listing tool. List your items fast and easy and manage your active items.
BLASTRAC 1-8DEZ SHOT BLASTER SHOT BLASTING MACHINE#2 BLASTRAC 1-8DEZ SHOT BLASTER SHOT BLASTING MACHINE gone over from a-z no issues IN GOOD WORKING CONDITION All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN ... more8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
Blastrac 1-8DEZ Portable Concrete Shot Blasting Machine. Good condition. Some scuffs and scratches, could use a little clean up, but no major damage that I noticed. Unable to fully test. Guaranteed Functional. If you have any questions feel free to ask. Please check out our other auctions. Because of the size. Would need to be shipped to a commercial address, likely via freight. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value ... moremerchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. SquareTrade © squaretrade warranty v2.0
IT HAS A OAK DOVETAILED CASE THAT MEASURES 10 1/4 INCHES TALL. 5 3/4 INCHES WIDE AND 7 3/4 INCHES FRONT TO BACK. IT IS IMPRESSED WITH A NUMBER 2 ON THE TOP AND IT HAS A BRASS PLAQUE WITH A NUMBEWR 18 ON THE FRONT. IT IS PAINTED BATTLESHIP GRAY. WE HAVE NO WAY TO TEST THIS BUT IT MAKES A SOUND THAT SOUNDS LIKE IT DOES WORK. Please carefully review all the photos. Please ask all questions prior to bidding. Buyer pays S&H. You can search all my items by clicking on the Ebay Store link above Powered by The free listing tool. List your items fast and easy and manage your active items.
Peterson model AB-604 airless shot blasting machine. Shot blaster. Designed to do 4 large diesel or gas cylinder heads up to 40" long at once. It functions as it should, has some wear but far from worn out. No leaks or known issues with it. I did replace the door seal and two of the paddle wheels and changed the dust collector over to a bag style, its much cleaner and I do have the original box filter that came with the machine. It comes with all the hold down bars and an extra bag and a half of shot. It is still wired up so you can see it run. I'm moving and dont have room to take it with me. I can help load it onto a flat bed trailer. Feel free to call me with any questions at 616-308-1342 I can send more pictures of the machine if you are interested. Kansas instruments. Kwik-way, van Norman, sunnen, steelabrator.
Cold Jet AeRO 30 LIKE NEW CONDITION(Less than 1 Hour) This lightweight. Compact, single-hose low pressure, electric dry ice blast cleaning system utilizes dry ice pellets in a patented aerodynamic rotor which assures high reliability and smooth pulse-free dry ice blast flow. Blast pressures up to 140 psi(9.7 bar) 110 Volt Comes with aftercooler and attachment We bought this dry ice blasting machine to use for various cleaning purposes that we no longer have a need for in our shop so it is technically used but essentially still new surplus equipment. Having been run for less than one hour since we purchased it new. This Blaster was orignially purchased for over $20K SHIPPING& TERMS Buyer is responsible for ALL shipping charges(including any loading/unloading. Crates, palletes, skids, etc. Items will be shipped via a standard ground Freight ... moreprovider. UPS, or FedEx Ground depending on your needs and preferences and restrictions. Buyer may have to pay"duty" if shipped internationally. Insurance can be purchased for an additional fee. To the best of our knowledge all items are sold in good to great working condition. All used and pre-owned items are sold“As-Is. Where–Is” RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-142ee2b48df-0xf7-
VINTAGE DYNAMITE BLASTING MACHINE U.S. ENGINEERS- FIDELITY ELECTRIC COMPANY STANDARD 30-CAP EXPLODER GOOD CONDITION THANKS FOR LOOKING! HAPPY HOLIDAY! WISHING YOU A WARM HOLIDAY SEASON! a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-142f33da51c-0xf6-
Normal 0 false false false EN-US JA X-NONE Normal 0 false false false EN-US JA X-NONE Normal 0 false false false EN-US JA X-NONE DUPONT BLASTING MACHINE ALUMINUM CONSTRUCTION 10 1/2" Tall x 9 1/2" x 9 1/2" DATA PLATE Instructions inside from Rowan Controller Company. Baltimore, Maryland Condition as shown in the photos. This item is sold for display only- I do not know if it works This item can also be picked up in person at the Sterling Hill Mining Museum. Ogdensburg, New Jersey I am happy to combine shipping on listings which end within three days of each other. And if the items can be safely packed into one package. Some items are so heavy, delicate, etc. that they cannot be packed together in which case I may have to pack the items into several packages and cannot reduce the shipping charge. Also, if you are taking advantage ... moreof combined shipping you MUST wait for my invoice and pay for all the items at once, or I cannot combine shipping charges. Please check back and see my other auctions- I will be listing an extraordinary collection of mining memorabilia. Paper, postcards, many more stock certificates, porcelain signs, miner's lamps, blasting boxes etc. Normal 0 false false false EN-US JA X-NONE May be picked up at the Sterling Hill Mining Museum in Ogdensburg. NJ if you wish to save on postage. Shipping includes delivery confirmation and insurance within the US, and insurance on international packages. Payment must be received within 5 days of auction end. International bidders PayPal only, and please e-mail me ahead for your shipping charges.
Dynamite Blasting Machine And Dynamite Stick Bundle This is a Reproduction Dynamite Blasting Machine with fake bundle of Dynamite sticks with wire attached.Every effort was made to make this look authentic.Would make a great gift for kids or big kids.I used brass slotted screws as fasteners.The wood box was stained and has a light coat of laquer.The leather strap is real leather also.The plunger goes up and down and stays put when pulled to the up position.This box is solid and weighs 3 pounds.I made this to look like the real thing.Not some stage prop.Measures 8 1/2 in tall 5 1/2 in wide and 6 in deep.US Shipping is USPS Parcel Select or USPS Priority Mail.International Shipping is USPS Priority International.Feel free to ask any questions.
This auction is for a Antique Atlas Blasting machine No 3-350- This is wood w/ plunger detonator. May have been used for mining. 50-30ft copper wire- electric blasting caps This has been used. The plunger still works with no problems. This is 16" tall with the plunger in the down position. A painted number on one side. Thank you. Buyer gets these as seen and described. Please review the full lot of photos I have included. There may be two rows that you can view.Please check out the other auctions I currently have in progress. SHIPPING Information: It is 29lbs shipping includes insurance double boxed. I combine shipping on multiple purchases. Available for pick up. Please note I am located on the east coast so shipping times vary in length depending on your location. The USPS states priority takes 1-3 days. Parcel post 3-9 days. UPS states ... moreshipping can take 3-6 days. So if you are on the west coast please expect the longest time for delivery. I can not control how long it takes once I ship it. I ship the day after payment. Please email me at least 24 hours prior to the end of the auction with any questions, I try to answer all emails in a timely fashion, but I don't monitor the email all day long. Please use the Ebay ask buyer question method to ask any questions. There is insurance coverage included is through ebays shipcover insurance and is insured for the full amount of the purchase. I do this to protect both you as the buyer and myself for loss or damage during shipping. This insurance does not cover the shipping costs, any lost or refunded item will be refunded for the full amount of purchase only- shipping charges are NOT included in the refund. PAYMENT Terms: Paypal is prefered method of payment. I have the right to relist an item after 10 days if I don’t receive confirmation of sale or payment from the buyer. Please do not request a Buy-it-now request. I let all my auctions run their course. Thanks and good luck. Please note I need to charge tax on all CT. sales. It will be added to the inv
4 full size. FAKE dynamite sticks 8" x 1 1/4" They are made out of wood wrapped with heavy grade red paper, ends neatly folded and glued, then varnished. Looks like the real thing, over 400 sold on Ebay. Sold and shipped only to USA for novelty and display purposes only.
VINTAGE VME MODEL 450 A BLASTING MACHINE VME-NITRO CONSULT INC. PLEASE E-MAIL ME WITH ANY QUESTIONS PRIOR TO BIDDING. ALL ITEMS ARE USED UNLESS OTHERWISE STATED AND WILL SHOW APPROPRIATE WEAR FOR THEIR AGE AND USE. ITEMS ARE SOLD IN AS IS AS FOUND CONDITION. SHIPPING TIMES STATED IN LISTING ARE APPROXIMATE AND CANNOT BE CONSTRUED AS DEFINITE SHIP BY DATES. ITEMS ARE SHIPPED USUALLY NEXT BUSINESS DAY AFTER RECEIPT OF PAYMENT. PAYMENT IS EXPECTED WITHIN 5 DAYS. BECAUSE ONE PERSONS VIEWS ON CONDITION VARY FROM ONE TO ANOTHER PLEASE VIEW PICTURES AND LISTING PRIOR TO BIDDING. PLEASE NOTE THAT LARGE AND OR HEAVY ITEMS WILL SHIP VIA UPS OR FED-EX. PLEASE E-MAIL ME PRIOR TO LEAVING FEEDBACK WITH ANY CONCERNS REGARDING MERCHANDISE. FEEDBACK DOESN'T SOLVE PROBLEMS BUT TALKING WILL. GOGOGO! Powered by The free listing tool. List your items fast ... moreand easy and manage your active items.
COLD JET AERO 40 DRY ICE BLASTING MACHINE BLASTER ONLY 137 HOURS WORKS GREAT COLD JET AERO 40 DRY ICE BLASTING MACHINE BLASTER ONLY 137 HOURS WORKS GREAT. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY ... moreBLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
Up for auction is a Vintage Blasting Box. I don't know what year it's from as there are no tags or plates on it. It measures 10 inches tall to the top of the box not including the handle or strap. It is 4 1/2 inches wide and 6 inches deep. It is all tougue and grooved. Auction is for the USA(48 states) only. Postage is 20.00
Cold Jet Aero 80HP Dry Ice Blasting Machine- made in the USA Complete used Aero 80HP Dry Ice Blasting Package in very good condition with 217 hours- including blaster. Hoses, and nozzle. High Pressure version of the popular Aero 80, this machine is ideal for blasting applications including industrial cleaning applications and more difficult blasting applications. 80lb hopper, delivers 0-7 lb per minute at 20-300 psi. Further information is available at Cold Jet's website. The Aero 80HP employs components of Cold Jet's patented SureFlow System design which allows you to use a full load without worrying about clogging. Couple that with automated hopper agitation. Super Multilayer Insulation, 360° turning radius and flat-free wheels and the Aero 80HP will let you clean like never before. Dimensions 32 x 20 x 46, weight 400lb. Unit ... moreships from stock by motor freight to any US 48 state address for 150. Email or call for freight rates to AK/HI/PR or international destinations. Sutton-Garten Co. is a 96 year old industrial distributor in Indianapolis IN. We are an authorized Cold Jet distributor. We sell new and used Cold Jet dry ice blasting equipment and maintain a fleet of dry ice machines available for rental. We also manufacture dry ice blasting pellets and block. For technical questions. Call us at 800-686-4674 M-F 7:30- 5:00pm. The Aero 80HP dry ice blasting system includes: One length of 1” 2.5 cm) blast hose. One length of air hose. Static Bond Cable. Applicator with light(Aero 80 HP) with one nozzle(either standard or adjustable- your choice)
This items are used and they are in working condition. The rubbers for the buttons of the blasting machine are broken as show on the 2nd picture. But it doesn't effect the function. They have been full checked out and work great. The pictures show actually what will you get. Nothing else is included. Any questions please feel free to contact me and I will get back to you asap. Expect to receive the payment right away. Serious buyer ONLY. Thanks.
E.I.T. Scorpion model HR-1 non electric shock tube. Electric initiator blasting Machine.Tested, new battery installed, in excellent working condition. I do combine shipping. Visit my other auctions. GOOD LUCK
Handi-Blaster model 10 blasting Machine.Tested. New battery installed, in excellent working condition. Has a chipped battery cover can be seen in photos, dose not affect the operation, red charge light is on as shown in the photo. I do combine shipping. Visit my other auctions. GOOD LUCK.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143b21d7765-0xee-
Handi-Blaster model 10 blasting Machine with leather storage case.Tested. New battery installed, in excellent working condition, red charge light is on as shown in the photo. I do combine shipping. Visit my other auctions. GOOD LUCK
A description follows the pictures so please make sure you scroll all the way down through the photos. And READ the description! I will combine shipping on multiple purchases whenever possible. This auction is for an antique DuPont No. 2 Blasting Machine. It measures approximately 13 inches tall. Is 5-1/2 inches wide and 7 inches deep. The plunger moves up and down. The original leather handle is crackled, but is still supple and strong. It has a metal plate on top, and one on the front(pohots) There are four small nail holes in the front indicating that there was once something else attached. Both brass bolts and wing nuts are present and in excellent shape. Please see the photos for a more accurate description of the condition. I am using eBay's picture hosting service. But am also embedding the photos into the listing. I may have more ... morephotos embedded than ebay allows for in their service, so please make sure you check all of the photos. Thank you and Happy Bidding! Please feel free to email us with any questions. Including shipping/handling quotes, but do not ask us to cancel or end our auctions early, or transact business outside of eBay. General Terms& Conditions: Important Shipping information: We ship via priority mail and use priority mail boxes. We package in the highest grade materials including new. Previously unused bubble wrap and styrofoam peanuts. We include Insurance in the shipping estimate. If we have a brown box that the item will fit into, we will ship via parcel post or first class mail if you ask. The shipping price given by the ebay calculator is an estimate. If the actual costs are lower, we will issue refunds for overpayments. We understand that shipping costs can be expensive. We do our best to minimize the cost but if you email us before bidding or paying, we will do whatever we can to work with you. Insurance is included in shipping cost. Payment is expected within 3 days of close of auction. Shipments are generally made within 2 days of receipt of payment. Please email any que
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: SBN9023 A: 0015000000bCw7m O: 0065000000PlDIV PA: 0015000000VvVTW View Photo Gallery. Calculate Shipping. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a 1999 Clemco Sand Blast Machine in average condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions ... morefor industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Clemco Model: 1648 Year: 1999 Serial Number: 29023 Shipping Weight: 550 Shipping Dimensions: 43"L x 43"W x 54"H Features: Abrasive Metering Valve 3 Cubic foot capacity Discharge Hose Resources: For more information on this unit including full specifications. Visit the Condition: Former rental unit in good overall condition Not tested by bidadoo- last to be known as functional Unit is in good overall cosmetic condition See photos for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights, dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine
Vintage Dynamite Blasting Machine Box Unknown Mfg. w/ Leather Strap Measures Approximately 6 3/4" x 6" x 9 1/2" Dupont Blasters Handbook Copyright 1949 Manual Of First Aid Instructions For Miners Government Printing Office 1022