In 
 
Order by: 
Available to: 
Price: 
 - 
$
23.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US! If you want a shipping discount on multiple items. Do not pay for any ... moreitems. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a Tube Head. This USAWELD tube head fits Miller GA16-C guns used on Miller Sidekick and Cricket Welders. This is a direct replacement for Miller p/n 110795 Swan Neck. This swan neck measures about 6 1/4" long. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example, if you purchased 1 set of nozzles, 1 set of,035" tips, and 1 set of.030" tips, the first item would ship for $5.95 and each additional item would be $.50, for a combined shipping charge of $6.95 for the 3 items. However, you must pay for all items with one combined payment for this shipping discount. Separate payments for each item are not eligible for a shipping discount. Again. If you want a shipping discount on multiple items, do not pay for any items. And we will send you an invoice. Separate payments for each
$
13.95
Buy It Now
$4.00 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 10 brand new pieces of 2% Thoriated Tungsten. This tungsten is.040” diameter and 7” long. It has a red tip and meets ANSI/AWS spec A5.12 EWTh-2. This is first quality tungsten and is generally used with transformer based square wave or sine wave TIG welding machines in the DC mode for welding steel. Stainless steel and 4130 tubing. HTP’s part number is TT2-7040. This tungsten is suitable for use in all tig welders. A few examples are the Miller Econotig. Syncrowave 180, 200 and 250, Hobart Tigmate and Lincoln Precision Tig 175, 185, 255 and 275 welders. This tungsten is also suitable for use in Inverter machines for welding both AC and DC. Some examples are the HTP Invertig 201. 160DC, 130 DCHF, 130 DCL, Miller Dynasty 200SD and 200DX, and the Lincoln V205-T. These are just a few examples. But this tungsten will work in all tig welders. Save time. Money and gas. This tungsten ships anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on sh
$
44.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
For S25 / S25K / S30 / S35K / S45 Ergocut© S45 Plasma Torch. S45 Roller Guide Wheel. 22 Piece Pipe Tip Set + Retaining Cap + Roller Guide Wheel. 42 Piece ... morePipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
49.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
For sale is a Tig Torch Adapter that will allow you to connect any 1 7 series or 9 series Tig torch with a one piece cable assembly to a welder that has ... morea 1/2" dinse connector and a 5/8-18 RH male gas connection.
$
121.95
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. Dual scale gauge with unbreakable poly carbonate ... morelens for durability. Poly carbonate flow tube and outer cover are impact resistant for maximum durability.
$
145.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
This CK Worldwide Tig Torch is a direct connect to the Esab Rebel EMP 215ic. This is a 12 ft long9 series torch with a gas valve on the body and a 12' ... moresuperflex one piece power cable. Based on inventory levels the hose could be black, blue, or red.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Sharpsburg, United States
30-QTY, HTP, .030" 000 067 Mig Contact Tips Tubes Miller 000067.
$
13.95
Buy It Now
$25.13 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! Premium Quality HTP 5356 alloy tig filler rod is made in Canada and packaged in the USA. This is a 2 lb bag. And the filler is 1/16” in diameter and 36" long. Each piece has the alloy stamped into it so you can identify the alloy of the individual rods. This is premium quality filler rod. With a nice shiny appearance indicating that it is not oxidized and is a high quality premium TIG filler rod. This is the same filler rod we sell with our Invertig 221. A $2500 tig welder with a 90 day money-back guarantee. If this rod was not high quality rod. We would be getting a lot of welders returned. HTP 5356 alloy aluminum wire has the following typical wire chemistry: Si: 0.25 max Fe: 0.4 max Cu: 0.1 max Mn: 0.05- 0.20 Mg: 4.5- 5.5 Cr: 0.05- 0.20 Zn: 0.1 max Ti: 0.06- 0.20 Be: 0.0003 max Al: BAL It meets the AWS specification AWS A5.10 and the AWS classification ER 5356. Certification is available by request. 5356-1/16-36
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
S45 Roller Guide Wheel. 10 xExtended Drag Electrodes PR0106 (907N0111T). 50 Piece Drag Cut Set. 30 Piece Drag Cut Set. 18 Piece Drag Cut Set. 22 Piece ... morePipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
25.49
Buy It Now
$4.00 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 10 brand new pieces of Pure Tungsten. This tungsten is 1/8" diameter and 7” long. It has a green tip and meets ANSI/AWS spec A5.12 EWP. Certification is available on request. This is first quality tungsten and is generally used with transformer based square wave or sine wave TIG welding machines in the AC mode for welding aluminum or magnesium. HTP’s part number is TP-718 This tungsten is suitable for use in all tig welders. A few examples are the Miller Econotig. Syncrowave 180, 200 and 250, Hobart Tigmate and Lincoln Precision Tig 175, 185, 225, 255 and 275 welders. We may subsitute another well known brand of tungsten should we not be able to supply genuine HTP Tungsten. If you have an Inverter based AC/DC welder. We do not recommend using pure tungsten for welding aluminum. Save time. Money and gas- this Tungsten will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay
$
17.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
A 1 USAWELD Diffuser for the following Snap On Plasma Cutters: Plasma 25, Plasma 50, and Plasma 60i. The diffuser is letter E in the 2nd photo.
$
7.99
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
$
159.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
This is a 17 Series TIG torch and will plug right in to the Miller Multimatic 200, Multimatic 215, Maxstar 150STH, and any other Miller TIG Welder that ... moreutilizes a 3/8" Dinse flow-thru gas torch connector.
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
For S25 / S25K / S30 / S35K / S45 Ergocut© S45 Plasma Torch. S45 Roller Guide Wheel. 42 Piece Pipe Tip Set + Retaining Cap + Roller Guide Wheel. 22 Piece ... morePipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
329.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 26 series FLEX head tig torch and will plug right in to the Miller Dynasty 200 series welders. Dynasty 300 series welders, Syncrowave 250 DX, Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 series welders and any other Miller Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. A 26 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 200 amp 100% duty cycle torch. This 26 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: Buy in confidence from HTP America. Inc. your total welding specialist since 1981,
$
49.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
A Tig Torch Adapter that will allow you to connect any 26 series Tig torch with a one piece cable assembly to a welder that has a 1/2" dinse connector ... moreand a 7/8-14 RH male gas connection. This tig torch adapter will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection.
$
179.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
You can see the close up photo of our version of Miller's international style TIG torch adapter. This torch is a plug and play for the Syncrowave 180SD, ... moreSyncrowave 200 and Syncrowave 210. This design puts much less strain on your wrist and makes the torch feel lighter.
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
【CGA580 Inlet & Dual Outlets】CGA580 Bottle Connection for argon, CO2, and helium blend tanks; 2 Male 5/"8 UNF-18RH Fittings and 2 1/4" Hose Barb Adapters ... moreare included. Ideal for ✔ Miller, Lincoln, Hobart, HTP, and most other welders.
$
6.00
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
$
135.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 9 series tig torch and will plug right in to the Thermal Arc 201 TS. 185& 186 and any other which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. A 9 series torch is the standard torch found on many tig welders. The super flexible one piece cable assembly is 12 1/2 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Weldcraft's Q5G-150 air cooled torch adapter- this part alone will cost $45.00 and we include it on this torch for no additional charge. If you are looking for a different configuration of this torch(25 ft. Flex neck, or swivel head) or a 17 or 26 series torch to fit a Thermalarc welder, send us an e-mail for a quote- we can build anything. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combin
$
6.00
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
$
16.75
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
$
6.00
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
These welding guns are found on several Hobart welders including:Beta MIG 1800 500 Series, Handler 125, Handler 135, Handler 140, Handler 175, Handler ... more180, Handler 187, Handler 190, Handler 210, Handler 201 MVP, Iron Man 210, Iron Man 230, Beta MIG 2510, Beta MIG 2250, Iron Man 250, Iron Man 275.
$
21.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
WFFC Tote MIG Model 117-055. WFWT Tote MIG Model 117-027. 3 HTP Gas Nozzles. Even though there is only one nozzle in the picture, you will receive three ... morenozzles. These nozzles fit the followingMatco Welders.
$
22.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US! If you want a shipping discount on multiple items. Buy the items you ... morewant, do not pay for any items. And we will send you an invoice. The Invoice will be in your"My E-bay" Buying" Won" area. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 2 Conical Gas Nozzles. This is letter F in the 2nd picture. These will fit the following Century welders. 117-001. 117-002. 117-003. 117-004. 117-005. 117-006. Century All Star. We recommend you measure your gas nozzle and compare it to the one in the photo. If you have a model that this nozzle fits. But it is not in the list, please let us know. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example, if you purchased 1 set of nozzles, 1 set of,035" tips, and 1 set of.030" tips, the first item would ship for $5.95 and each additional item would be $.50, for a combined shipping charge of $6.95 for the 3 items. However, you must pay for all items with one combined payment for this sh
$
45.99
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
【CGA580 Inlet & Dual Outlets】CGA580 Bottle Connection for argon, CO2, and helium blend tanks; 2 Male 5/"8 UNF-18RH Fittings and 2 1/4" Hose Barb Adapters ... moreare included. Ideal for ✔ Miller, Lincoln, Hobart, HTP, and most other welders.
$
6.00
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items, buy the items you want, do not pay for any items, and we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 3 USAWELD Nozzle Retaining Springs which fit some models of Century MIG Welders. W If you need a part for a welder which is not in our e-bay store. Please send us an e-mail with a photo. We have thousands of parts in stock and more than likely have what you need. These will fit the following Century welders. 117-001. 117-002. 117-003. 117-004. 117-005. 117-006. Century All Star. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save time money and gas. These nozzle springs will ship to your door anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example,
$
154.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
This CK Worldwide Tig Torch is a direct connect to the Esab Rebel EMP 215ic. We can custom build any torch you want for this machine. 25 ft long, Flex ... moreNeck, Swivel head, 26 series, 9 series. Just ask, we can build it!
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
For S25 / S25K / S30 / S35K / S45 Ergocut© S45 Plasma Torch. S45 Roller Guide Wheel. 42 Piece Pipe Tip Set + Retaining Cap + Roller Guide Wheel. 22 Piece ... morePipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
159.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
You can see the close up photo of our version of Miller's international style TIG torch adapter. This torch is a plug and play for the Syncrowave 180SD, ... moreSyncrowave 200 and Syncrowave 210. This design puts much less strain on your wrist and makes the torch feel lighter.
$
19.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are looking at a 1/16 Stubby Gas Lens Kit for all 17. 18& 26 series tig torches. This kit allows you to put a 9 or 20 cup onto a 17, 18 or 26 torch head. Our kit comes complete with one each of the following: 1/16 collet. 1/16 gas lens collet body, 8 alumina cup, heatshield, medium back cap. These will handle the following tungsten size: 1/16 You can shorten your total length by over half with this kit and the small back cap and help get into those tight spaces! This kit is for a 1/16 size ONLY. For a complete kit to accept 4 different tungsten diameters see ebay item# 141108274736 For a 3/32 size kit see ebay item# 171418727009 This kit fits all 17& 26 series air cooled torches and 18 series water cooled torches. Including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17, DB18 and DB 26 torches, along with the Weldcraft LS-17, WP-17, WP-18 and WP-26 torches. Go to our store and see all the other items we have on auction: This is a first quality gas lens kit from HTP America. Your total welding specialist for 32 years. If you have any questions about this auction. Call 1-800-USA-WELD or send me an e-mail. Please note: when contacting us with any questions by e-mail. DO NOT HIDE YOUR E-MAIL ADDRESS. We respond to all e-mails through our e-mail system. Not E-bay’s my message system. W
$
269.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is an HTP 9 series swivel head tig torch and will plug right in to the Thermal Arc 185 and Thermal Arc 186 and any other Thermal Arc Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. The swivel head torch has a head than can be rotated 360 degrees to get into tight places. It is great for working on roll cages or exhaust headers. A 9 series torch is a nice small compact tig torch. It is very popular with people building aircraft due to its nice compact size. It uses 13N series Alumina Cups which are about 1 1/8" long. The super flexible one piece cable assembly is 12 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. Again. If you want a shipping discount on multiple items, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are qu
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
For S25 / S25K / S30 / S35K / S45 Ergocut© S45 Plasma Torch. S45 Roller Guide Wheel. Includes 10 Pc Drag Cut Set 50 Piece Drag Cut Set. 30 Piece Drag ... moreCut Set. 18 Piece Drag Cut Set. 42 Piece Pipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
7.99
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
$
154.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 9 series FLEX tig torch and will plug right in to the Thermal Arc 201 TS. 185& 186 and any other which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. A 9 series torch is the standard torch found on many tig welders. The super flexible one piece cable assembly is 12 1/2 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Weldcraft's Q5G-150 air cooled torch adapter- this part alone will cost $45.00 and we include it on this torch for no additional charge. If you are looking for a different configuration of this torch(25 ft. Flex neck, or swivel head) or a 17 or 26 series torch to fit a Thermalarc welder, send us an e-mail for a quote- we can build anything. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one c
$
135.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 9 series tig torch and will plug right in to the Longevity 200ex and any other which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. A 9 series torch is the standard torch found on many tig welders. The super flexible one piece cable assembly is 12 1/2 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Weldcraft's Q5G-150 air cooled torch adapter- this part alone will cost $45.00 and we include it on this torch for no additional charge. If you are looking for a different configuration of this torch(25 ft. Flex neck, or swivel head) or a 17 or 26 series torch to fit a Longevity welder, send us an e-mail for a quote- we can build anything. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
For S25 / S25K / S30 / S35K / S45 Ergocut© S45 Plasma Torch. S45 Roller Guide Wheel. Includes 10 Pc Drag Cut Set 50 Piece Drag Cut Set. 30 Piece Drag ... moreCut Set. 18 Piece Drag Cut Set. 42 Piece Pipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
19.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
Onetrigger switch for Miller GA-16C and GA16C-1 welding guns which were the original welding gun installed on Miller Cricker and Sidekick Welding machines. ... moreThis USAWELD trigger switch isequivalent to Miller’s part number 110 784.
$
269.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is an HTP 9 series swivel head tig torch and will plug right in to the Miller Dynasty 200 series welders. Dynasty 300 series welders, Syncrowave 250 DX, Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 series welders and any other Miller Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. The swivel head torch has a head than can be rotated 360 degrees to get into tight places. It is great for working on roll cages or exhaust headers. A 9 series torch is the standard torch found on many tig welders. The super flexible one piece cable assembly is 12 1/2 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Millers p/n 195 378 air cooled torch adapter- this part alone will cost $45.00 and we include it on this torch for no additional charge. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on s
$
145.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
This is a 17 series air cooled tig torch with gas valve on the body and a 12' superflex cable. The fitting on the end of the gas hose is the standard ... more5/8-18 RH male.Based on inventory levels the hose could be black, blue, or red.
$
4.00
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 5 brand new Tig Collets. These collets are for use with a 1/16” Tungsten. The collets have a part number 13N22. They fit all 9 series air cooled torches and 20 series water cooled torches. Including the Lincoln PTA-9 and PTA-20 torches, Miller Diamondback DB9 and DB 20 torches, along with the Weldcraft WP-9 and WP-20 torches. The collets measure 1" long. Save time. Money and gas- these collets will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example, if you purchased 1 set of nozzles, 1 set of,035" tips, and 1 set of.030" tips, the first item would ship for $5.95 and each additional item would be $.50, for a combined shipping charge of $6.95 for the 3 items. However,
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
✅Inlet & Outlet - CGA580 Bottle Connection for argon, CO2, and helium blend tanks; Male 5/"8 UNF-18RH Fitting and 1/4" Hose Barb Adapter are included. ... moreIdeal for ✔ Miller, Lincoln, Hobart, HTP, and most other tig mig welders machines.
$
174.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
This is aFLEX HEAD 17 series tig torch and will plug right in to the Miller Syncrowave 210, 200, 185, and Econotig Tig Welders which requires the Thru ... moreGas Twist Mate torch connector. This design puts much less strain on your wrist and makes the torch feel lighter.
$
29.95
Buy It Now
$7.95 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new Tig Welding Gas Lens Kit. It includes one of each of the following: Alumina Nozzles- 5 54N17. 6 54N16, 7 54N15, and#8 54N14 Gas Lens Collet Bodies- 040" 45V24. 1/16" 45V25, 3/32" 45V26, and 1/8" 45V27. Collets(not Pictured) 040" 10N 22. 1/16" 10N23, 3/32" 10N24, and 1/8" 10N25 It also includes a heat shield. Which is the white item. This kit fits all 17& 26 series air cooled torches and 18 series water cooled torches. Including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17, DB18 and DB 26 torches, along with the Weldcraft WP-17, WP-18 and WP-26 torches. Save time. Money and gas- this gas lens kit will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an addition
$
154.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 17 series tig torch and will plug right in to the Miller Syncrowave 210 Tig Welder which requires the Thru Gas Twist Mate torch connector. Common brand names/designations are WP-17(Weldcraft) PTA-17(Lincoln) DB-17(Miller Diamond back) This is an extremely high quality tig welding torch which features a one piece power cable design. The power cable is made from silicone rubber with a nylon braided weave overlay which means it is extremely flexible- and it will stay flexible in cold weather! This design puts much less strain on your wrist and makes the torch feel lighter. We will put this torch against any of the above mentioned torches in both quality and performance. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the Twist-Mate torch connector. The diameter of the connector is 1/2" and the gas flows through the hole in the center. Lincoln and Miller charge you over $35 for this connector alone- we include it on your tig torch! Save even more– Mig. Tig and Plasma parts ship FRE
$
15.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
The invoice will be in your “My E-bay” > “Buying” > “Won” area. When in doubt, wait for us to send you an invoice! When in doubt, wait for us to send ... moreyou an invoice!
$
174.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 9 series FLEX tig torch and will plug right in to the Thermal Arc 185& 186 and any other which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. A 9 series torch is the standard torch found on many tig welders. The super flexible one piece cable assembly is 25 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Weldcraft's Q5G-150 air cooled torch adapter- this part alone will cost $45.00 and we include it on this torch for no additional charge. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Again. If you want a shipping discount on multiple items, do not pay for any items. And we will send yo
$
14.99
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
They fitall 9 series air cooled torches and 20 series water cooled torches, including the Lincoln PTA-9 and PTA-20 torches, Miller Diamondback DB9 and ... moreDB 20 torches, along with the Weldcraft WP-9 and WP-20 torches.
$
24.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
Retaining Cap PC0116. For S25 / S25K / S30 / S35K / S45 Ergocut© S45 Plasma Torch. S45 Roller Guide Wheel. 5 Piece Standoff CV0010. 42 Piece Pipe Tip ... moreSet + Retaining Cap + Roller Guide Wheel. 22 Piece Pipe Tip Set + Retaining Cap + Roller Guide Wheel.
$
140.00
Buy It Now
$10.19 Shipping
Condition: New
Location: Elk Grove Village, United States
THIS AUCTION IS FOR THE"ROLLER GUIDE ONLY" THIS IS A NEW ROLLER GUIDE FOR THE HORBOR FREIGHT 95136 AND 60767 PLASMA CUTTERS THIS ROLLER GUIDE ... moreIS FULLY AJUSTABLE FOR EATHER THE STANDERD TIP OR THE PIPE TIP THAT I SELL ON EBAY IT HAS A THREADED BOLT HEAD( 6x1mm) ON ONE SIDE SO YOU CAN MAKE A ROD FOR A CIRCLE CUTTER ALL STEEL CONSTRUCTION AND CHROME PLATED TO LAST NO PLASTIC PARTS TO WEAR OUT MELT OR STRIP I HAVE THEM IN STOCK AND READY TO SHIP PLEASE NOTE: THIS GUIDE WILL NOT WORK WITH AFTERMARKET OR COPYED S45 RETAINING CUPS I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN To learn more about this and other items I have for sale on ebay go to www.georgesplasmacuttershop.com Thank you
$
329.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit the Miller Syncrowave 210, Syncrowave 200, Syncrowave 180SD and Econotig ... moreTig Welders. We can custom build any torch you want for this machine.
$
5.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 2 brand new Gas Lens Tig Collet Bodies. These collet bodies are for use with a 1/8” Tungsten. The collet bodies have a part number 45V27. They fit all 17& 26 series air cooled torches and 18 series water cooled torches. Including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17, DB18 and DB 26 torches, along with the Weldcraft Legacy LS17, LS17V, WP-17, WP-17V, WP-18, WP-26 and WP-26V torches. These collet bodies measure 1 7/8" long. They must be used with a gas lens alumina cup and heat shield. If you wnat an assortment. See our gas lens kit. Save time. Money and gas, these collet bodies will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Tig parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. They ship for only the cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG or TIG parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So. For example, if you purcha
$
105.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
This CK power cable is for any 9 series or 17 series torch.Super-flex power cable with M16 back end. This design puts much less strain on your wrist and ... moremakes the torch feel lighter.
$
64.85
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
The end that connects to the power source is a 7/8"-14 LH Male and the end that connects to the torch head is a 1/4"-28 RH Female. The power cable is ... more12.5 feet long. This design puts much less strain on your wrist and makes the torch feel lighter.
$
22.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 2 USAWELD Gas Nozzles that fit the miller GA-16C gun used on the Sidekick and Cricket Welders. This gas nozzle is letter F in the 2nd picture. You only get the two of nozzles. letter f" This is a direct replacement for Miller P/N 120 789. The nozzles are held on the diffuser by the spring. You twist clockwise and push to install them. And twist clockwise and pull to remove them. Letter A is the Tube Head and can be found on item# 141033279820. Letter D is nozzle springs that can be found on item# 200951344180 Letter E are contact tips and.023 is item# 170780145672 and.030 tips are item# 170780145329 and.035 tips are 140699997151. Letter F the nozzles that can be found on item# 170587086421. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less This part will ship anywhere in the US for only $5.95 by Priority Mail. This gas nozzle will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and
$
154.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
12' Flex tig torch for Miller Diversion 180. You are bidding on a brand new American Made Tig Welding Torch. This is a FLEX 9 series tig torch modified ... moreto be a direct connect replacement tig torch for a Miller Diversion welder. If you have a foot pedal and want a high quality replacement tig torch with a super flexible. Silicon rubber hose with a red nylon over braid, this is the torch for you. A 9 series torch is a nice small compact tig torch. It is very popular with people building aircraft due to its nice compact size. It uses 13N series Alumina Cups which are about 1 1/8" long. The super flexible one piece cable assembly is 12 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. The fitting you see in the 2nd picture is the direct connect M12x1 thread for your Diversion. This fits both the Diversion 180 and 165. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less If you want a shipping discount on multiple items. Do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! SR9F-12DIV
$
7.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 1 Electrode-Standard with INTERNAL thread for a Marquette plasma torch. This electrode-Standard will fit the following Marquette Plasma Torches. M12150 and M12149. This HTP electrode-standard is equivilant to Marquette's part number M15802. Compare to Marquette. We are offering you 1 electrode with external thread for $4.95! This electrode will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example, if you purchased 1 set of nozzles, 1 set of,035" tips, and 1 set of.030" tips, the first item would ship for $5.95 and each additional item would be $.50, for a combined shipping charge of $6.95 for the 3 items. However, you must pay for all items wit
$
22.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 1 USAWELD Swirl Ring for the following Snap-On Plasma Cutters: YA5550. The swirl ring is letter D in the photo. If you need the other parts they are all in our store- see Snap-On Plasma Parts- Plasma Torch Type B. Save time. Money and gas- this part will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example, if you purchased 1 set of nozzles, 1 set of,035" tips, and 1 set of.030" tips, the first item would ship for $5.95 and each additional item would be $.50, for a combined shipping charge of $6.95 for the 3 items. However, you must pay for all items with one combined payment for this s
$
4.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Elk Grove Village, United States
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 1 Electrode-Standard with INTERNAL thread for a Marquette plasma torch. This electrode-Standard will fit the following Marquette Plasma Torches. M12150 and M12149. This HTP electrode-standard is equivilant to Marquette's part number M15802. Compare to Marquette. We are offering you 1 electrode with external thread for $4.95! This electrode will ship anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Save on shipping by combining purchases with MIG. TIG, or Plasma parts. Any item which ships by priority mail for $5.95 and has an additional item cost of.50 can be combined with the first item shipping for $5.95 and each additional item shipping for.50. So, for example, if you purchased 1 set of nozzles, 1 set of,035" tips, and 1 set of.030" tips, the first item would ship for $5.95 and each additional item would be $.50, for a combined shipping charge of $6.95 for the 3 items. However, you must pay for all items wit
$
135.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village, United States
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 17 series tig torch and will plug right in to the Thermal Arc 186. Arcmaster 185, and Arcmaster 200 Tig welders and any other Thermal Arc welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. Common brand names/designations are WP-17(Weldcraft) PTA-17(Lincoln) DB-17(Miller Diamond back) This is an extremely high quality tig welding torch which features a one piece power cable design. The power cable is made from silicone rubber with a nylon braided weave overlay which means it is extremely flexible- and it will stay flexible in cold weather! This design puts much less strain on your wrist and makes the torch feel lighter. We will put this torch against any of the above mentioned torches in both quality and performance. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 121/2 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Weldcr
4 5 6 7 8 9 10 11 12 13 14 15 16
 In