In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
499.99
Buy It Now
$27.52 Shipping
Condition: Used
Location: Fleetwood, United States
Dumore Tool Post Grinder 7.000/13,000Rpm 1/4HP 44-011 w/Grind Wheels THIS GRINDER IS FOR PARTS/NOT WORKING. IT HAS BEEN PLUGGED IN BUT IT DID NOT TURN ... moreON. THE POWER CORD NEAR THE BASE OF THE MACHINE ITSELF IS FRAYED. IT COMES WITH ALL WHEELS SHOWN IN PICTURES. NO SPECIFICATIONS BUY AT YOUR DISCRETION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 44-011 APPROX. PRODUCT DIMENSIONS: LENGTH: 10" WIDTH: 10" HEIGHT: 7" SHIPPING WEIGHT: 33 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE
$
399.00
Buy It Now
$113.00 Shipping
Condition: Used
Location: Milwaukee, United States
LISTING IS FOR A USED DUMORE No.5 THE MASTER METAL LATHE TOOL POST GRINDER WITH SPINDL ES AND CASE BRAND- DUMORE No.5 T HE MASTER 115 VOLT 5.6 AMP 1/2 ... moreHP 10.000 FULL LOAD RPM COMES WITH 2 SPINDL ES& CASE EVERYTHING IN PICTURE IS INCLUDED COND ITI O N- GOOD USED SWIT CH WAS PREVIOUSLY REPLACED TURNS ON AND RUN S GOOD Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME.
$
250.00
Buy It Now
$20.00 Shipping
Condition: Used
Location: Fresh Meadows, United States
Used DUMORE tool post grinder only ,no case, no attachments/accessories, model 14-011, good working condition
$
1350.00
Buy It Now
Free Shipping
Condition: New
Location: China
The universal tool grinder is equipped with various fixtures to grind turning tools, three side milling cutters, and end milling cutters. 600 universal ... moretool grinder (with double head grinding wheel).
$
280.00
4d 11h 1m 25s
0 bids
$66.94 Shipping
Condition: Used
Location: West Frankfort, United States
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 12000 RPM Themac J35 TOOL POST GRINDER. 115 VOLT Ref# 151932 iammdna XTPSTG THEMAC J35 TOOL POST GRINDER. EXCELLENT CONDITION. 12.000 RPM. 115 VOLT. Machine Location: HARRISON. NJ Click Here For More Themac Machines Click Here For More Grinders. Lappers& Hones- TOOL POST GRINDERS(s) Click Here For More Tooling& Accessories- TOOL POST GRINDERS(s) Click Here For More Toolroom Machines- TOOL POST GRINDERS(s) Questions about this Machine? Call Andy at(800) 873-6224 ext 7600 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete details on how this works. New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines. Most items in our store are located in our warehouse in Harrison. New Jersey- about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is n
$
399.00
Buy It Now
$68.00 Shipping
Condition: New
Location: Poland
2 x 2” idler wheels each 2.25” wide. - Machine takes 2" wide belt. 48" to 82" long.
$
299.99
Buy It Now
$140.20 Shipping
Condition: Used
Location: Watsontown, United States
This Dumore Tool Post Grinder No. 7 011 is a powerful and reliable tool for any metalworking project. It features a 3/4 HP motor and comes with a convenient ... morecase for easy transportation and storage. The grinder is suitable for use with various materials and is designed for precision grinding. Its brand and machine type, Dumore Tool Post Grinder, ensure high-quality performance and durability. This item is perfect for anyone in the metalworking industry looking for a dependable and efficient tool.
$
120.00
Buy It Now
$61.93 Shipping
Condition: For parts or not working
Location: La Habra, United States
Care of Operation of Portable Precision Lathe(tool post) Grinders. Published by the Dumore Company. But there is no publication date. I have had this ... moreprofessionally re-typeset and printed. The cover is a copy of the original cover on heavy card stock and stapled. 20 pages with index in front. This is quite an interesting book, some of the topics covered: History of Grinding, Selecting the Grinder; Selecting Proper Quill, Selecting Proper Wheel, Setting up the Grinder on a Lathe, Mounting the Grinder on a Shaper, Mounting the Grinder on a Miller, Mounting the Grinder on a Boring Mill, The Assembly of Dumore Grinders, Features of Dumore Grinder Motors and Quills, Troubleshooting, Maintenance and some Special Applications. Should be helpful to those who have a Dumore Tool Post Grinder. Shipping will be $2.00 USPS first class mail. I accept PAYPAL Due to the nature of this item I do not accept returns. But if you have any problems, please feel free to contact me. Please email with any questions.
$
85.00
Buy It Now
Condition: Used
Location: Coffeyville, United States
9" PEDESTAL GRINDER. OAD W/OUT PEDESTAL 9" X 28" X 14-1/2". CINCINNATI ELECTRICAL TOOL CO. OAD W/PEDESTAL 9" X 28" X 48". SERIAL NO. 235367.
$
599.99
Buy It Now
Free Shipping
Condition: Used
Location: Stamford, United States
This is the base only, no work head. It can use more cleaning.
$
129.00
Buy It Now
Free Shipping
Condition: New
Location: United States
M18™ Cordless LITHIUM-ION 4-1/2" Cut-off/ Grinder-Bare Tool 2680-20 The M18™ Cordless LITHIUM-ION 4-1/2" Cut-off/ Grinder provides speed. Durability ... moreand ease-of-use to the industrial user. Built with a Milwaukee® 4-pole motor, the 2680-20 delivers maximum power when cutting or grinding. The 2680-20 is the only cordless cut-off/ grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions. L-shape intake vents protect the cut-off/ grinder by keeping harmful debris from entering the tool and damaging internal components. 2680-20 M18™ Cordless LITHIUM-ION 4-1/2" Cut-off/ Grinder-Bare Tool Type 1 Guard Type 27 Guard Spanner Wrench Side Handle Milwaukee® 4-Pole Motor- Delivers maximum power when cutting or grinding Overload Protection- Prevents damage to the tool and battery in abusive situations Debris Baffles- L-shape vents keep debris from entering the tool and damaging internal components to help increase tool life. Tool Free. Burst Resistant Guard- Allows for quick, easy guard adjustments. Easy to access and actuate too free guard makes it easier and less time consuming to adjust the guard for various applicatoins. Paddle Switch Design- The only cordless cut-off/grinder in the market with a paddle switch design Up to 35% faster cutting speed Up to 50% more cuts on a single charge 3-Position Side Handle- Provides optimal Control and Versatility Voltage 18V RPMs 9.000 Paddle Switch Yes Tool Free Guard Yes Large Button Spindle Lock Yes Position Handle 3 Type 1 Guard Yes Type 27 Guard Yes Battery 0 Tool Weight 4.4 lbs Shipping Weight 5.3 lbs
$
749.99
Buy It Now
Free Shipping
Condition: Used
Location: Stamford, United States
The vise screw handle pin holes show wear. Its in decent shape, things more and get tight as they should. Its big and heavy.
$
475.99
Buy It Now
$49.99 Shipping
Condition: Used
Location: Lombard, United States
For sale is Atlas tool post grinder. In used condition with dings and scratches. Grinder runs great. Wheel guard is missing screws. No T-bolt with the ... moregrinder. Please see photos for details. Thanks for looking
$
650.00
Buy It Now
Condition: Used
Location: Fleetwood, United States
US Electrical Tool Co. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. Let us know what’s going on. us at six one zero-nine two one-eight eight four eight. ... moreWhen we receive the product we will confirm item is.
$
85.00
6d 15h 34m 56s
0 bids
$20.43 Shipping
Condition: Used
Location: United States
Milwaukee grinder 5" lock on. Only use one time. Like new. See the pictures. No returns
$
650.00
Buy It Now
$63.88 Shipping
Condition: Used
Location: Frankfort, United States
$
11.69
Buy It Now
Free Shipping
Condition: New
Location: 闵行区, China
1 Piece Portable Twist Drill Sharpening Drill Bit Sharpener(1 Piece Drill Sharpener + 2 Grinding Wheel Pieces 3 Modules). This tool has interchangeable ... moresharpening bits for different drill and grinder materials, giving it a wider range of applications.
$
55.10
Buy It Now
Free Shipping
Condition: New
Location: United States
Ryobi ZRP420 ONE Plus 18V Cordless 4-1/2-in Angle Grinder(Tool Only) Tool-less guard makes positioning guard easy On-board spanner wrench conveniently ... morelocated in the side handle Rotating battery foot places the battery in the most convenient location GripZone overmold for improved comfort with a positive grip 3-position side handle allows handle to be placed in most comfortable position Binding:Misc. Brand:Ryobi, Item Dimensions Weight:0.03 pounds, Label:Ryobi, Manufacturer:Ryobi, Model:ZRP420, MPN:ZRP420, Part Number:ZRP420, Product Group:Home Improvement, Publisher:Ryobi, Studio:Ryobi, UPC:033287139576, Some of our products offer expedited shipping and one day service for an additional fee. Click on Shipping and payments for more details. Free Shipping is standard and transit time is 4-14 business day. Depending on the size. Kind and supplier of the product, One-day and Expedited Shipping service may not be available* We use different suppliers across the US to ensure your item is delivered as fast as possible. We do not sell used. Fake, refurbished or items shipped from outside of US. IT IS NOT OUR INTENTION TO MISLEAD BUYERS INTO PURCHASING OUR ITEMS SO PLEASE READ THE TITLE AND THE DESCRIPTION CAREFULLY. We sell BRAND NEW items. We do not accept returns due to Buyer Mistakes We do our best to give you the best ebay OFFER! Products are new and shipped from US from multiple suppliers. Shipping We ONLY provide shipping to the 48 continental states in the US. We ONLY ship to the confirmed address on paypal. No exceptions. FAST'N FREE it's an Ebay Estimated Transit Time. Actual transit time is 4-14 bussines days. Orders are not processed for shipments on Weekends or Holidays We also provide you with a tracking number in most of the items so that you can feel confident and comfortable with your purchase. If the item is too small it will not have tracking number. NO shipping to Alaska. Hawaii, Puerto Rico, PO Box, APO/FPO. No discounts for combined shipping because shipping is free in all our
$
300.00
3d 2h 56m 47s
0 bids
$35.00 Shipping
Condition: Used
Location: Olive Branch, United States
DUMORE Tool Post Grinder No. 44-011 1/4 H.P. 7.000- 13,000 R.P.M. Condition: Good Questions? call Metro Machine& Tool 908-354-0666
$
350.00
Buy It Now
$86.55 Shipping
Condition: Used
Location: Warsaw, United States
Dumore tool post grinder with yellow shield and blade Model 8526-210 Catalog 57-031 120 volts 8.2 amps.75 hp No load rpm 16000 Chip in blade Posted with
$
68.99
Buy It Now
Free Shipping
Condition: Used
Location: Jacksonville, United States
USED - RYOBI PBLAG01B Brushless 4-1/2" Grinder/Cut-Off Tool (TOOL ONLY)
$
750.00
Buy It Now
Free Shipping
Condition: Used
Location: King George, United States
Up for consideration is this Themac J35 No.2234 115V Tool post grinder. Has been energized and seems to work. Comes with extra wheels. Additional mounting ... moreplate and some old tooling not which is guaranteed. Wiring is frayed please refer to pics. Any questions please email me anytime. All sales are final and pictures are part of the description.
$
600.00
Buy It Now
Condition: Used
Location: Oviedo, United States
Tool Grinder ENCO / MSC (or Jet)grinder (not sure because cabinet was repainted). Used but in good condition. Partially refurbished and repainted and ... moreconverted to run on 120 Vac with new Motor. Sold as is.
$
299.99
Buy It Now
$24.86 Shipping
Condition: Used
Location: Waterford, United States
THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES.
$
999.99
Buy It Now
Free Shipping
Condition: Used
Location: Stamford, United States
CINCINNATI#2 CUTTER& TOOL GRINDER NICELY PREPARED GEAR CUTTER GRINDING ATTACHMENT ALL ORIGINAL CINCINNATI#2 UNIT 1DBV COMPLETE IN EXCELLANT CONDITION. ... moreACTUAL PHOTO EVERTHING INCLUDED INCLUDES CENTER GAUGE. INDEX PAWL& 1" BUSHING SOLD AS IS WITH CINCI INSTRUCTION SHEET SHIPS PARTIALLY DISASSEMBLED FLAT RATE SHIPPING INCLUDED PLEASE SEE OUR OTHER AUCTIONS& THANKS FOR LOOKING. CONTACT MRI-DENVER FOR MORE INFORMATION 303-623-5551 Powered by The free listing tool. List your items fast and easy and manage your active items.
$
79.00
Buy It Now
Free Shipping
Condition: Open box
Location: Cedartown, United States
This Milwaukee 2680-20 M18 18V LithiumIon 4.5" Cordless Grinder is a powerful tool that can make your cutting and grinding tasks easier. It features a ... morerotary/circular action and a burst-resistant guard, making it a reliable tool for your workshop or home. The grinder is powered by an 18-volt lithium-ion battery, which is not included in the package.Additionally, this cordless grinder has a disc diameter of 4 1/2 inches, making it a great tool for cutting and grinding various materials. It comes with a manufacturer warranty of 1 year and has a power of 800 watts. The tool is red in color and has a model number of 2680-20.
$
46.00
4d 19h 35m 34s
3 bids
$15.38 Shipping
Condition: Used
Location: Dover, United States
Brushless motor of the angle grinder requires no brush changes. WHAT'S INCLUDED Tool only. Power Loss Reset prevents accidental restarts following a power ... moredisruption when the tool is left in the "on" position.
$
2500.00
Buy It Now
$300.00 Shipping
Condition: Used
Location: Scottsburg, United States
Freight is to a business with a dock or forklift only. Thanks for looking and if any questions just message us. 
$
106.49
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
The M18 FUEL™ 4-1/2" / 5" Grinder generates 11A corded power allowing you to complete the toughest grinding and cutting applications, all on the M18™ ... moreCordless System. The M18 FUEL™ 4-1/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life.
$
199.00
Buy It Now
Condition: Used
Location: Liberty, United States
WOULD MAKE A GREAT EXTRA IF YOU HAVE THIS MODEL OR WANT TO UPGRADE FROM A 500 TO A 522. IT RUNS ,IT IS VERY STRONG IN FORWARD AND REVERSE ,THE LIGHT WORKS ... moreBUT IT IS MISSING THE SIDE TABLES AND WATER PANS.
$
399.99
Buy It Now
$55.63 Shipping
Condition: Used
Location: Waterford, United States
USED, LAPIDARY SAW AND GRINDER. I HOOKED IT UP TO A MOTOR AND IT RUNS FINE. NO MOTOR, MOTOR PULLEY, ACCESSORIES INCLUDED. LOOK AT THE PICTURES..
$
29.99
Buy It Now
Free Shipping
Condition: Used
Location: Waterford, United States
, FLAT BELT.
$
129.99
Buy It Now
Free Shipping
Condition: Open box
Location: Jacksonville, United States
With our dynamic pricing model, our prices are always competitive. Item is sold as is! Computers/Tablets & Networking. You're already purchasing the item. ... moreCompetitive Pricing.
$
29.00
Buy It Now
$7.00 Shipping
Condition: Used
Location: Albuquerque, United States
Used condition, as pictured. Engraved. The Ready Tool Co. has a website and a video showing these in use but it's only nine seconds long. $7.00 for USPS ... moreGround.
$
474.05
Buy It Now
$120.00 Shipping
Condition: Used
Location: Bhavnagar Wadva S.O, India
$
199.99
3d 18h 11m 45s
0 bids
Condition: Used
Location: Corona, United States
Cincinnati No. 2 Tool& Cutter Grinder. Loaded with accesories. Fingers& Fixtures. Motorized 5C Collet Head with Variable Speed Control, Numerous ... more5C Collets& Stand, 6 Jaw chuck, 3 Jaw chuck, Magnetic Chuck, Radius Attachment, Manual 5C Indexer, Swiveling Vise, Operating& Instruction Manual, Swing between centers: 10" Diam. Max. Length between Tailstock centers: 27" Max. Table Movement: 16"Longitudinal. 8"Cross, Swivels 360 Degrees, Grinding Wheel Head: 7.5" Vertical. Swivels 120 Degrees both ways(240 Deg. total) T-Slots: 9/16" Wide, Table size: 36"x5.25" Voltage: 575V 3 ph 60 Hz. optional 220V or 440V Transformer Available for $490.00) Weight: approx. 2.100 Lbs. We arrange all necessary paperwork for customs to cross the border& we pay all Brokerage Duties& Clearing costs. Call Jeff with any questions: 1-204-594-0315 Buyer can pay our $490.00 fixed freight charge or may make their own arrangements Our Website:
$
6.98
Buy It Now
Free Shipping
Condition: New
Location: Pomona, United States
【Powerful, Safe & 2 Speeds Adjustable】Electric Pedicure Tools has 2 speeds:1700 RPM/min and 2000 RPM/min. When the pressure of the pedicure tool is too ... morehigh,its will automatically stop working and protect your skin.
$
900.00
Buy It Now
$160.66 Shipping
Condition: Used
Location: Frankfort, United States
Runs 16800RPM with no load, 10000RPM with a full load.
$
58.49
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Fixed block device,Conducive to grinding the tip of the tungsten electrode to make it flat, for the next grinding use. -- Tungsten electrode cut-off port ... moresetting, humanized design. -- 3 holes (Total 12 holes) are prepared for each tungsten needle grinding size, which has a longer service life.
$
23.74
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
Use them for everything from removing rust to smoothing down rough corners and even trimming a dog's toenails. A flexible shaft is included with this ... more80-piece rotary tool kit so that you can use a bit on an object and leave your other hand free to turn the object as you work.
$
500.00
Buy It Now
Condition: Used
Location: Lenapah, United States
All products are as is.
$
834.99
Buy It Now
$257.86 Shipping
Condition: Used
Location: Covina, United States
Baldor 532 A-742-341 bench top carbide tool Grinder Double end 6" 3ph Reversing SPECIFICATION Bullseye Catalog# 33763 1/2 HP 3 phase 208-230/460 ... moremotor, Comes with fused disconnect motor starter, Currently wired 460 volt, Tested and in good working condition, workbench stand included, Weight: 389 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote
$
650.00
Buy It Now
$50.00 Shipping
Condition: Used
Location: Perry, United States
Used, tested working. There are bits and ascessories pictures that are in the case. The case is nice and closes well.
$
41.99
Buy It Now
Free Shipping
Condition: New
Location: Lincoln, United States
Engineered with premium materials and built for enduring strength, this pedestal features a sturdy cast iron base that provides unwavering stability for ... moreall your grinding endeavors. Grinder pedestal stand with robust cast iron base ensures unwavering stability for precise grinding operations.
$
69.99
6d 0h 18m 30s
0 bids
$17.46 Shipping
Condition: Used
Location: Bolivar, United States
Get your hands on this powerful Milwaukee angle grinder, perfect for your next DIY project. With a disc diameter of 4 1/2 inches and a voltage of 18V, ... morethis lithium-ion battery-powered grinder is a must-have for any home workshop. The sleek design in red and black is sure to impress while the 13-1/8 inch item length provides ease of use.This Milwaukee (2883-20) grinder is an excellent choice for all your grinding needs. Its standard action and powerful battery technology make it a versatile tool for any job. Don't miss out on this opportunity to add this top-quality angle grinder to your collection.
$
1050.00
Buy It Now
$160.00 Shipping
Condition: Used
Location: Unionville, United States
$
74.99
Buy It Now
$15.00 Shipping
Condition: Used
Location: Cape Neddick, United States
I TAKE A LOT OF PICTURES OF ALL MY ITEMS SO Please look at pics.Any questions please ask. We take paypal.I ship all my items international but All international ... morebuyers must use paypal.Thanks for looking.
$
895.00
Buy It Now
Condition: Used
Location: Brookpark, United States
14" WHEEL. -- WGT: 2,300LBS.
$
32.50
Buy It Now
$9.51 Shipping
Condition: Used
Location: Waterford, United States
THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE.
$
129.99
Buy It Now
$20.98 Shipping
Condition: Used
Location: Waterford, United States
USED, GRINDING DOGS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
$
699.00
Buy It Now
$175.12 Shipping
Condition: Used
Location: Wentzville, United States
$
600.00
6d 13h 19m 59s
0 bids
Condition: Used
Location: Mineola, United States
WITH OVER 40 YRS.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
(3) Tungsten electrode cut-off port setting, humanized design. 1) 4 Brass Tungsten Rails: 040", 1/16", 3/32 "and 1/8". 4 brass can be interchanged. 5) ... moreSuitable for most all rotary tools with a 3/4-12 thread.
$
49.00
Buy It Now
$17.00 Shipping
Condition: Used
Location: Eugene, United States
SOTTOF SALES Nice quality tools in very good shape. Includes 3 5/8" wheel arbors. 1 collet chuck w/ 1/8" collet, 1 6" extension(has ID ... morethreads as well) one adapter that has a taper common to many surface grinders, Harig, Brown& Sharpe and many others. All the tapers on these items is the same- 1.350" L. Small end.475" large end.528" the threads on the taper end are 3/8" 24 Please look carefully at all the photos and ask questions prior to bidding. Thanks. D3782.4 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
$
495.00
Buy It Now
Condition: Used
Location: Friendship, United States
Hammond of Kalamazoo. 6" Grinder.
$
17.98
Buy It Now
Free Shipping
Condition: New
Location: Whippany, United States
✨Versatile Rotary Tool Accessories 3.7V 800mAh Li-ion battery Only 1 hour can finish fully charging. Type Cordless Rotary Tool Kit. Rotary Tool Size 170 ... moremm 30 mm/6.7 in 1.18 in. 🚚1 x Cordless Rotary Tool.
$
43.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Get ready to grind away projects and get things done right with VEVOR. Why Choose VEVOR?. VEVOR 780W Rotary Flex Shaft Grinder Hanging Grinding Carver ... moreElectric Tool Kits. VEVOR Rotary Flex Hanging shaft Grinder Mill Jewelry Tool 560W 6.5mm Foot Switch.
$
91.20
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1X U3 universal grinder 5C cutter head, yellow. U3 Sharpener/Grinding Machine Universal 5C Cutter Head with 29mm Dovetail Groove. Suitable for U3 universal ... moregrinding machine. The length of the dovetail groove of the sharpener plus the spacer is about 29, which can be used universally.
$
58.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Specification: Voltage: 18V Chuck Size: 6mm. Spindle Diameter: 12.7mm 1/2''. Grinding Wheel Diameter: 125mm/4.9inch. Material: Engineering Plastics. Feature: ... moreHigh Quality : Copper core motor, high power, anti-overload, prevent burning machine.Super heat dissipation, three-dimensional heat dissipation, protect the motor. Brushless & Cordless : The Brushless motor eliminates carbon brushes.Cordless design make working more convenient, improve efficiency,you can work at any where like outdoor without any cable winding and power socket. Easy To Use : Small handle, light weight, easy outdoor operation,non-slip handle, more effectively to reduce fatigue during operation. Slide switch: conveniently located for one hand operation.
$
899.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Why Choose VEVOR?. VEVOR 2"x82" Belt Grinder Sander with 2HP Motor 3 Tool Rest Complete Chassis. VEVOR Random Orbital Sander 5 in. Variable Speed Palm ... moreSander 350W w/ Pad & Bag. VEVOR 9" Drywall Sander 850W Vacuum System Folding 6 Speed LED Strip Light.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Antique Tobacco Leaf Grinder Cast Iron Primitive Farm Tool Country Store display
Antique Tobacco Grinder. Measures 10" long. 6" high and 6-1/2" wide. Some light rust and pitting but nothing that would be unexpected for an old antique of this age and style. Good Condition. Please see pictures for details. PAYMENT: Please make payment via PayPal within 5 days. If more time is needed please contact me. An Unpaid Item Case will be opened if payment is not recieved within 7 days. International buyers must pay via PayPal in US Dollars. Sorry no exceptions. SHIPPING: Shipping is available worldwide. Item will be shipped out within 2 days after payment is recieved. Thank You for looking and please check out our other listings.
Old Vintage Antique Universal 1 Meat Grinder / Chopper U.S.A. Kitchen Tool
Old Vintage Antique Universal 1 Meat Grinder/ Chopper New Brittain. Conn. Made in U.S.A. Good Condition! Please Note: You must pay through Paypal within 10 days. Sorry no foreign sales. Happy to combine shipping on multiple purchases. Good Luck and Happy Bidding! Please check out my other auctions!
OLD Universal No.1 COMPLETE Hand Crank Meat/Food Grinder **GREAT SURVIVAL TOOL**
Universal No. 1- Made in USA This is a great old timey manual meat/food grinder COMPLETE! Grinder has three blades and parts. Nice wood knob. Just what any"Prepper" needs to add to his/her family's SURVIVAL TOOLS. When things get tuff you will be ready to grind any kind of game meat around! Sorry. I do not have the original box. Approx. 11" long. Selling item"as is" Please ask any questions before placing a bid. Thanks for looking! Please note: I except paypal only! Buyer to pay shipping& handling(STANDARD MAIL) cost in the 48 states. Additional charges for shipping will apply in Ak or Ha. Please enter your zip code into the shipping calculator below to determine shipping cost. I’m sorry but I cannot ship this item overseas nor can I ship overnight. Please DO NOT ASK. I ship twice a week due to high fuel prices. ... moreI ask that folks please be patient. I am a one-person operation. Paypal payment has to be cleared before item(s) can ship. Please see my other auctions. I can sometimes combine items to save on shipping costs. I will be happy to email additional pictures to serious buyers. Upon request, and will also be glad to answer any questions that I can. Note: Winning bidder should contact seller within 72 hours(3-Days) after the end of auction. I would encourage all potential buyers/bidders to ask all questions, relevant to the auction, BEFORE bidding. Otherwise you agree to payment and shipping terms. I strive to give honest descriptions on all of my items I sell. Any damages are pictured and most items are SOLD AS IS. All returns must be approved by the seller. Items are not sold on an"approval basis" Thanks and good luck in your bidding!
Old Vintage Antique Keystone 10 Meat Grinder with Flour Mill Head Kitchen Tool
Old Vintage Antique Keystone 10 Meat Grinder with Flour Mill Disk No Meat Grinder Disks included. C.I. Company Boyertown. PA Excellent Condition! Please Note: You must pay through Paypal within 10 days. Sorry no foreign sales. Happy to combined shipping on multiple purchases. Good Luck and Happy Bidding! Please check out my other auctions!
Old Vintage Antique Griswold No. 2 Meat Grinder / Chopper / Kitchen Tool - USA
Old Vintage Antique Griswold No. 2 Meat Grinder 1742 The G.M. Co. Erie. PA Excellent Condition! Please Note: You must pay through Paypal within 10 days. Sorry no foreign sales. Happy to combine shipping on multiple purchases. Good Luck and Happy Bidding! Please check out my other auctions!
Old Vintage Antique Universal No. 1 Meat Grinder / Chopper / Kitchen Tool - USA
Old Vintage Antique Universal No. 1 Meat Grinder L.F.C. New Britain. Conn. U.S.A. Excellent Condition! Please Note: You must pay through Paypal within 10 days. Sorry no foreign sales. Happy to combine shipping on multiple purchases. Good Luck and Happy Bidding! Please check out my other auctions!
Old Vintage Antique Universal No. 3 Meat Grinder / Chopper / Kitchen Tool - USA
Old Vintage Antique Universal No. 3 Meat Grinder L.F.C. New Britain. Conn. U.S.A. Excellent Condition! Please Note: You must pay through Paypal within 10 days. Sorry no foreign sales. Happy to combine shipping on multiple purchases. Good Luck and Happy Bidding! Please check out my other auctions!
SPONG MEAT GRINDER,VINTAGE,LONDON UK,CAST IRON,KITCHEN TOOL,RED WOOD HANDLE,NICE
UP FOR YOUR CONSIDERATION IS THIS VINTAGE MEAT GRINDER. MADE BY SPONG& CO. LONDON, ENGLAND. NUMBERED 25. HAS A NICE RED WOODEN HANDLE. IT IS VERY HEAVY AND MEASURES 9" LONG. A NICE PRIMITIVE KITCHEN TOOL TO ADD TO YOUR COLLECTION. I SHIP ALL MY ITEMS IN AN OVERSIZED BOX. WELL WRAPPED TO PROTECT THEM. PLEASE READ BEFORE YOU BID. I'm a firm believer in honesty and integrity and I do give an honest description of all my items so please read it carefully and look at all the pics before you place a bid. Refunds are only given if the item is not'as described' I will address any issue in a professional and courteous manner and in a timely fashion. I am not a dealer. Just a collector who loves going to auctions and estate sales but I just can't keep everything I buy. I do describe my items with as much accuracy and detail ... moreas I can and research any Vintage or Antique items I sell before I list them. I usually include any interesting information I find about these items for the buyer. If you need anymore information or additional photos, please contact me and I will be more than happy to provide you with any I have. Unless stated otherwise, you can assume everything I sell is used or pre-owned. I do not attempt to clean Vintage or Antique items as I do not want to ruin the patina or finish on them so I leave that to the buyer to use their own special cleaning products. SHIPPING CHARGES ARE ONLY AN ESTIMATE. IT MAY BE CHEAPER OR A LITTLE MORE EXPENSIVE DEPENDING ON YOUR EXACT LOCATION. IF YOU WANT TO KNOW EXACT SHIPPING CHARGES BEFORE YOU BID THEN PLEASE EMAIL ME WITH POST/ZIP CODE AND I WILL QUOTE YOU FOR YOUR LOCATION. IF YOU CHOOSE TO PAY WITHOUT WAITING FOR AN INVOICE I CANNOT REFUND THE DIFFERENCE IF IT TURNS OUT TO BE CHEAPER. SO PLEASE DO NOT PAY UNTIL I SEND TOTAL AMOUNT WITH CORRECT SHIPPING CHARGES.IF SHIPPING IS MORE THAN I HAVE QUOTED THEN YOU MUST PAY THE DIFFERENCE BEFORE I CAN SHIP YOUR ITEM. I DO NOT MAKE ANY MONEY ON SHIPPING BUT I DON'T WANT TO LOSE MONEY ON IT EITHER. I SHIP A
Vintage L,F@C Universal #2 Meat Grinder/ Chopper/ Kitchen Tool Made in the USA
This is a Universal meat grinder#2. Please use the photo's as part of the description as this is the item you will receive. Please email with any questions. Thanks for looking. Free shipping in the continental USA(lower 48 states) MOST OF THE ITEMS WE SELL COME FROM HOME. FAMILY,FRIENDS, ESTATE SALES. YARD/GARAGE SALES AND FLEA MARKETS.~~ I DO NOT HAVE KNOWLEDGE OF THE ENVIRONMENT THE ITEMS WERE EXPOSED TO SUCH AS SMOKE AND PET ENVIRONMENTS.~PLEASE TAKE THAT INTO CONSIDERATION BEFORE BIDDING I also use recycled packing materials whenever possible. Please examine the photos carefully as they are your best description. I strive for 100% positive feedback. Bid and buy with confidence. Have a blessed day!
vintage old Antique Enterprise meat grinder chopper tool collectible tinned
This is a Enterprise No 5 meat grinder chopper. It is in descent shape moves freely and would clean up for a nice display piece. Any questions feel free to email. Thanks. BUYER'S NOTE All the items we list the exact year and model the part was removed from. We make mistakes and sometimes the parts may have been changed over the years and could have come from a different year or model. We try to list the years and models as best we can with the information we have for interchange between models. But for your own sake if the part does not look correct to your application research before bidding. Please do not wait till you receive the part and come to the conclusion it is the wrong part and expect to be reinbursed for return shipping costs. We also offer for added fees your part can be blasted or powder coated and ready to install once ... moreyou receive it. Email for a price quote. CHECK OUT OUR EBAY STORE FOR MORE GREAT DEALS ON CLASSIC USED PARTS! SHIPPING INSTRUCTIONS: FOR A ACCURATE QUOTE THE BUYER'S ZIP CODE MUST BE ENTERED IN THE SHIPPING DETAILS. WARRANTY INFORMATION: NO WARRANTY IS WRITTEN OR IMPLIED ON ANY USED PARTS WE SELL. ALL PARTS ARE SOLD AS IS WITH NO GUARANTEES WRITTEN OR IMPLIED. PLEASE NOTE THAT SOME ITEMS WE HAVE IN STOCK MAY NOT BE THE SAME AS THE ONES PICTURED DUE TO HAVING DUPLICATES. WE TRY AND POST A PICTURE OF THE WORST ONE WE HAVE IN STOCK SO THE ONE YOU RECEIVE IS IN BETTER SHAPE MOST OF THE TIME IF IT IS A DUPLICATE. Powered by The free listing tool. List your items fast and easy and manage your active items.
Antique L.F.&C. New Britain Conn Climax 50 Metal Meat Grinder Old Kitchen Tool
Antique. Old, L.F.C. New Britain Connecticut, Climax 50, metal, meat grinder, old kitchen tool. This item shows wear including surface rust, missing finish, and overall dirtiness. It comes in working condition. This item is marked. Climax 50 L.F. C. New Britain Conn USA” and measures 9.5” x 6” x 3” overall; the opening at the top measures 3” x 2.5” Please see pictures for more details. On Oct-04-12 at 11:53:09 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
VINTAGE ANTIQUE ENTERPRISE MFG CO TINNED MEAT GRINDER CHOPPER TOOL SET.
This is an antique Enterprise Co meat grinder tool. Piece is in good working order. Plating in decent condition. Comes with all the parts shown in picture. Neat piece to display at your home, restaurant, store, or just grind up some meat with it. Thanks for looking! I do offer combined shipping. Feel free to ask for rates!
ANTIQUE BRASS MORTAR & PESTLE Apothecary & Pharmacy Tool Pill Smashy Grinder
This auction for nice used ANTIQUE BRASS MORTAR& PESTLE Apothecary& Pharmacy Tool Pill Smashy Grinder. item is very old with nice patina or age. very heavy brass. shows some minor pitting. very cool decorative item for doctors office or home decor. item ships as shown and described. item ships for 14.50 email for combined shipping.
Metal Apothecary Grinder Pharmaceutical Tool
Offered for auction is this metal Apothecary Grinding Tool with consists of two components. A metal"cup" which measures approximately 5" tall and 4" wide at the mouth and a grinding"stick" which measures approximately 5" long. Both components are metal, silverish in color with the inside of the jar black in color. There are no markings on the bottom of the jar, only advertising on the outside of the jar. One side of the jar has a portrait and says Daniel B. Smith, 1792-1883; the other side of the jar says First President of American Pharmaceutical Association Co- Founder of Philadelphia College of Pharmacy. The inside of the jar is clean and in great condition with a rough patch from where the grinding tool was probable used. The grinding tool itself has the word Coricidin embossed on both sides and some ... morewhite spots which could be metal corrosion or wear from usage. Not sure of the age of this item. Could be vintage, or a reproduction. I have no way of telling, but perhaps you do! If you have any information about this unique item or have specific questions, do not hesitate to contact me. Happy Bidding! Posted with
Vintage Antique Primitive Wood Wooden Pestle Potato Masher Mallet Grinder Tool
Vintage Antique Primitive Wood Wooden Pestle Potato Masher Mallet Grinder Tool 10 5/8" long used- shows wear and has split wood at the end We purchase most items at Estate Sales. We also search to find you the best items at the best prices. Items are sold in"As is/As Found" condition. We have described item the best we can and have given you a picture to look at. We have other items of interest for auction- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please keep in mind that I am NOT an expert. Nor am I familiar with all the proper terms to be used in describing such items. However, I describe each item as best and honestly as possible, as well as provide photos for your review. unless otherwise stated, items are sold“as is/as found” I do not attempt to clean items before selling them, and I leave this up to the new owner. This is ... morean estate sale find. I cannot vouch for the histories of items acquired from estate sales. I do try to list any defects that I see. I cannot be certain of their previous environments. Items are sold in"As is/As Found" condition. US Shipping only We have several items listed this week. So check out our other auctions or visit our eBay Store. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13d173a8142-0xf0-
RARE ANTIQUE CAST IRON AND TIN NUTMEG GRINDER GRATER SPICE TOOL yqz
Untitled Document Welcome to EstateAuctionsInc! We are one of the Top Sellers of Antiques. Collectibles and Quirky items on eBay. We have been selling since 1998 and ALL of our auctions start at.99 cents. We are proud to announce that we maintain a"FIVE STAR Detailed Seller Rating" and our staff strives for 100% customer satisfaction. Our 100% feedback rating will vouch for that. We work with consigners from Coast-To-Coast and work hard to make sure we have top quality items. We are"Your Quality Zone" search"YQZ" to see our other listings our_ UP IN THIS AUCTION RARE ANTIQUE CAST IRON AND TIN NUTMEG GRINDER GRATER SPICE TOOL Harras No 60 Please be patient there are 10 photos to be loaded in this auction. Here is a brilliant device that uses the power of the circle to perform an otherwise repetitive task. Grating ... morenutmeg or perhaps cheese. This is crafted from iron and painted a deep green color. It is marked HARRAS No 60 and accented with gold paint there. It is cleverly designed with a drum to scrape your nutmeg or cheese screw to clamp it to a table top to make it ready and steady to obtain some freshly grated nutmeg for the next time you cook a tasty dish with that ingredient. Can't you feel your mouth begin to water? It has a moving crank with a wooden handle and a circular feeding chute. It is really small. Measuring 1.5 x 5.5 x 3.5" This is probably a salesman's' sample. And Harras seems to be a German manufacturer. Estimated shipping weight. packaged) is 1 lbs 8 oz in a 8 x 6 x 4 box. The eBay Calculator is not always right- if the shipping looks too high email us and we will give you an accurate quote prior to the auction ending. What a great find! FACTS ABOUT ESTATEAUCTIONSINC(Norb& Marie Novocin) ONE OF EBAY'S TOP SELLERS OF ANTIQUES. COLLECTIBLES& RARE ITEMS* IN OUR 15TH YEAR ON E-BAY* OVER 40.000 SALES ON EBAY* OVER 16.500+ POSITIVE FEEDBACKS(11,535+ UNIQUE) 100% Positive Feed
Vintage Antique Collectible Keystone 10 Meat Grinder Kitchen Tool Utensil Baking
Up for auction is a Vintage Antique Collectible Keystone 10 Meat Grinder Kitchen Tool Utensil Baking. It works great and has some extra blade types that go with it.
Antique The Carborundum Co Niagara Falls Hand Crank Tool Grinder # 1-80 Works
Antique Hand Grinder This very old grinder is made by The Carborundum Co. Niagara Falls. This is model No. 1-80. Has the original nameplate on side, and is in very good condition. Shows all print and no damage. Grinder mounts to a bench or table with two notches on bottom. Wheel is worn and chipped. Housing is in great shape for its age, showing minimal surface rust and minor wear. Most bolts/nuts are tight, but main plate can be opened to expose gear, and for cleaning/lubricating. Gear is lubed some. Wooden handle is worn and cracked. Works well, turns easily. Stands 6 1/2" tall without wheel. Check out my! Just click on my categories to see more great and unique items! Payment is due within 4 days of auctions close. FREE Shipping(WITHIN U.S.A. includes tracking# Some orders are insured as needed. Due to loss and damage of International ... moreorders. Please ask before bidding. I will ship some items to some countries. Thanks for looking! Visit again soon.
Universal #2 meat grinder/food chopper - prepper tool dicer slicer
For your consideration. Universal#2 hand crank meat grinder- food chopper- no electricity required. Prepper- you can use this when the grid goes down! Antique food/meat chopper- patented in 1890's. Will display nicely in your antique kitchen. Crank turns freely- there is some surface rust. This would probably actually work for grinding meat- but that is totally at your own risk. Will need some thorough cleaning! You get everything you see in the pictures- please use zoom feature and examine item. Selling"as-is" so feel free to ask questions. Thank you for looking! THE FINE PRINT: 1. SHIPPING: I am glad to combine shipping where able- please be proactive. I cannot offer refunds to combine shipping once paid- so ask about it and wait for invoice if you have more than one auction or purchase. Also. Please remember- the feedback ... morequestion asks how quickly the seller shipped your item- NOT how fast did the shipping company deliver. I use USPS- most often the Priority Mail option unless it is prohibitively expensive. I ship daily Monday through Friday. 2. PAYMENT: Payment via PayPal expected within 3 days of auction end unless arrangements are made ahead of time. If you pay by e-check through PayPal. It takes several business days for that payment to clear and be deposited into my account(just like a paper check) Your item will ship once your e-check payment has cleared into my account. 3. RETURNS& REFUNDS: All returns handled on an individual basis. Please contact us prior to returning item so that we can determine best way to proceed. If. By some chance your item arrives broken, I will need you to email me picture of packaging and picture of item before proceeding with return or refund. Thank you. 4. DESCRIPTIONS: Most of my items are obtained through estate sales and farm auctions. I do clean up the items a little for the pictures. But I leave thorough cleaning to the new owner since patina from age and use, once removed, cannot be replaced. I describe items to the best of my ability and try to be
Universal #0 meat grinder/food chopper - prepper tool dicer slicer
For your consideration. Universal#0 hand crank meat grinder- food chopper- no electricity required. Prepper- you can use this when the grid goes down! Antique food/meat chopper- patented in 1890's. Will display nicely in your antique kitchen. Crank turns freely- there is some surface rust. This would probably actually work for grinding meat- but that is totally at your own risk. Will need some thorough cleaning! You get everything you see in the pictures- please use zoom feature and examine item. Selling"as-is" so feel free to ask questions. Thank you for looking! THE FINE PRINT: 1. SHIPPING: I am glad to combine shipping where able- please be proactive. I cannot offer refunds to combine shipping once paid- so ask about it and wait for invoice if you have more than one auction or purchase. Also. Please remember- the feedback ... morequestion asks how quickly the seller shipped your item- NOT how fast did the shipping company deliver. I use USPS- most often the Priority Mail option unless it is prohibitively expensive. I ship daily Monday through Friday. 2. PAYMENT: Payment via PayPal expected within 3 days of auction end unless arrangements are made ahead of time. If you pay by e-check through PayPal. It takes several business days for that payment to clear and be deposited into my account(just like a paper check) Your item will ship once your e-check payment has cleared into my account. 3. RETURNS& REFUNDS: All returns handled on an individual basis. Please contact us prior to returning item so that we can determine best way to proceed. If. By some chance your item arrives broken, I will need you to email me picture of packaging and picture of item before proceeding with return or refund. Thank you. 4. DESCRIPTIONS: Most of my items are obtained through estate sales and farm auctions. I do clean up the items a little for the pictures. But I leave thorough cleaning to the new owner since patina from age and use, once removed, cannot be replaced. I describe items to the best of my ability and try to be
STONE GRINDER / SMASHER VOLCANIC TOOL HAWAII....+ 6 " TALL / KOA BEADS
PLANT MORE TREES! WE GUARANTEE ALL OUR SALES. IN BUSINESS + 30 YEARS. BEST SERVICE AND GUARANTEES! SALE. MAKE AN OFFER" WE WANT TO SELL THESE HERE. THIS SALE. 6 PCS. KOA LOOSE BEADS.ONLY 4 PC.ROUND BEADS.1/4" TO 3/8" DIAMETER& 2 KOA FLORA. PLUMERIA'S.BEADS. 6 TOTAL. ONLY AS FILLERS. FOR JEWELRY. OR/ DECO. CURLY.KOA GRAINS. NATIVE. PRIZED.KOA.4 PCS. ROUND KOA BEADS AND 2 FLORA KOA BEADS.HERE. MAHALO.HAWAIIAN STONE.GRINDER/ SMASHER.FOOD/ MEDICINE/ DYES. Size.Approx. 6 5/8 Inches.x 4 5/8" Diameter Average Widest. Old Stone.Made Circa Early 1900's. No Cracks. No Splits. No Large Chips.Handsome.Solid. Volcanic.Basalt Stone. THE COMMON PEOPLE'S STONE TOOL.ROUGH. WELL MADE. SHAPELY ONES WERE RESERVED FOR THE CHIEFS. All Hand.Made.In.Water. the Old Way.by Hawaiians. One.Sturdy.Stone. Mahalo! THIS SALE SUMMARY IS ... moreFOR THE KOA LOOSE BEADS. AND THE HAWAII STONE SMASHER.POUNDER.BASALT.MAHALO! KIMO After purchasing. Pay instantly with your credit card through PayPal! CELL PHONE 1 808 230 7015.
Railroad Tool Grinder, Vintage Keystone Grinder Mfg. Co., Pittsburg, Pa., USA
For your consideration is this Vintage Railroad Tool Grinder. Made by the Keystone Grinder Mfg. Co. Pittsburg, Pa. 1-1/2" Wide x 7" Diameter Stone/ Wheel. For every(1) turn of the Crank the Grinding wheel turns about(12) times. A lot of the original Red paint is still intact. This tool is in good used working condition. Please look at the pictures and email me if you have questions. Please take a look at my Ebay Stores. I have a lot of nice tools listed there. MB8-3430 By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
USED STAINED GLASS TOOL KIT/WELLER 100 IRON/GLASTAR SUPER STAR 11 GRINDER
USED STAINED GLASS TOOL KIT This Used stained glass tool kit contains just about everything you will need to start creating beautiful stained glass with top of the line brands including a Glastar All Star Grinder. A Weller 100 Soldering Iron.as well as assorted colorful glass. Some of the items that we've included are brand new. This kit is priced at a fraction of what these tools would cost new. The grinder and soldering iron alone sells for almost $200.00 new. 1 pair safety glasses(new) 1 Fletcher glass cutter(used) 1 Pair Glass breaking Pliers(used) 1 fid/burnisher(used) 1 Weller 100 Watt Stained Glass Soldering Iron(used) 2 flux brushes(new) 1 Bottle Flux(new) 1 Bottle Cutting Oil(3/4 full) 1 Copper Patina(new) 1 Black Patina(2/3 full) 1 Glazing hammer(used) 1 lb whiting(new) Cement brush(new) 12 Horseshoe nails(new) 3 Assorted roll ... moreof copper foil(used) 1 Copper foil dispenser(like new but used) 1 Pair Choice Metal running pliers(used) 1 Heavy Base Soldering iron stand(used) Solder( 1/2 lb) 4 Stained Glass Pattern Books including: Stained Glass Alphabet Pattern Book 2. Living with Art Glass by Yvonne Barlog, Ed Sibbett, Jrs. Easy-To-Make Stained Glass Panels, and the Hollander Pattern Book, Volume 1 5 old issues of Stained Glass News and a Beginner's Guide to Stained Glass A Pretty Good Assortment of Colored Stained Glass Scraps/ Big pieces 1 small bag of glass nuggets(new) 1 Super Star 11 Glass Grinder(This grinder has a drawer in the front to store allen wrenches and bits) Used Straight Edge Guide& Allen Wrench Powered by
Old Vintage NUT GRINDER CHOPPER Glass FEDERAL TOOL CORP Chicago
Vintage Glass nut chopper manufactured by the Federal Tool Company of Chicago. Illinois The lid is highlighted in red around the bottom rim. The grinding"teeth" are powered by a key that is manually turned. The glass reservoir has a vertical paneled design. The piece measures 4" wide x 4" deep x 5.75" high. It is in very good working order with no chips or cracks in the glass. The metal lid shows wear consistent with age and use. 2 blades inside the lid are bent a little The bottom of the glass is marked with Federal Tool Corp Chicago
Antique Stone Artifact Pestle Tool Grinder Native American Indian?
I picked this piece up at an estate sale! It is so wonderful. The way it was made with two types of rock that had fused together by nature! The smoother bottom stone for grinding, and the coarser, granite? handle. I do not know a thing about it, so if you have some ideas and want to enlighten me, please do! I live in an area where there were quite a few Native Americans living, but I don't know if it is from around here. Approx. 4.375" long& 3" wide at the bottom. It weighs just under 1 lb. I do not add any handling fees; I try to charge you what the Post Office is going to charge me. I will be happy to combine purchases for the best shipping cost. Washington State residents pay sales tax. Payment is due within 5 days of auction end. Powered by The free listing tool. List your items fast and easy and manage your active items. ... moreag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13daeb5ab01-0xf3-
Vintage Keystone #10 Meat Grinder Kitchen Tool Made in USA
This is a Keystone#10 grinder in used condition. Please use the photo's as this is the item you will receive. Please email with any questions. Thanks for looking. Free shipping in the continental USA(lower 48 states) MOST OF THE ITEMS WE SELL COME FROM HOME. FAMILY,FRIENDS, ESTATE SALES. YARD/GARAGE SALES AND FLEA MARKETS.~~ I DO NOT HAVE KNOWLEDGE OF THE ENVIRONMENT THE ITEMS WERE EXPOSED TO SUCH AS SMOKE AND PET ENVIRONMENTS.~PLEASE TAKE THAT INTO CONSIDERATION BEFORE BIDDING I also use recycled packing materials whenever possible. Please examine the photos carefully as they are your best description. I strive for 100% positive feedback. Bid and buy with confidence. Have a blessed day!
DECKEL #SO SINGLE LIP TOOL & CUTTER GRINDER
aims DECKEL#SO SINGLE LIP TOOL& CUTTER GRINDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Deckel GmbH. This is a Single Lip Tool Cutter Grinder in good working condition. Model# SO Serial# 69-12129 The Deckel#SO Retails for Over $7.000.00! Features: The S0 is Deckel's proven basic model. Whose careful finish and solid machine design guarantee long-term precision- even after being through many years of hard workshop use. With the S0. You can grind single-lip cutters with any shapes of cutting edges, punches, twist drills, turning and shaper tools, feelers, center points, electrodes and a lot more items. Such obtainable multitude of shapes is based on versatile swiveling and adjusting possibilities and their ease of operation. Powerful drive. Integrated wheel ... moredressing unit. Precise grinding spindle. Versatile adjustments. Specifications: Grinding Motor/Spindle: Power Rating: 0.3 kw Motor Speed: 3.500 rpm Power: 110 Volt. Single Phase Amps: 7 Hz: 60 Spindle: 20 mm. Tool Holder: Tool Diameter with Collets: 3/32" to 5/8" Tool Diameter/ Special Tool Holder: 5/8" to 1" Tool Holder Settings: Lateral Adjustment: 0.4" Longitudinal Adjustment: 1.6" Maximum Relief Angle: 45 degrees Fine Adjustment of Index Head Relative to Spindle: 0.6" Number of Registers on Index Plate: 12. General: Electrical: 110 Volt. Single Phase Overall Dimensions: 17" x 17" x 11" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DECKEL#SO SINGLE LIP TOOL& CUTTER GRINDER DECKEL#SO SINGLE LIP TOOL& CUTTER GRINDER DECKEL#SO SINGLE LIP TOOL& CUTTER GRINDER DECKEL#SO SINGLE LIP TOOL& CUTTER GRINDER DECKEL#
VINTAGE RETRO FEDERAL TOOL, CHICAGO-NUT GRINDER, SYRUP PITCHER-CONDIMENT SET
This vintage Federal Tool of Chicago nut grinder is 5' tall and does hve some rust. The Federal Tool syrup pitcher is 5' tall. The 5 piece condiment set has two jars. 3' tall has a holder and two spoons. The spoons are plastic. Thank you for looking and feel free to ask questions. I have other items listed you may want to check. Check out my! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*0a6211%3E-13de63dea7b-0xf6-
Rutland Tool 6" CARBIDE TOOL GRINDER 3450 RPM 1 HP
This is a used Rutland Tool Tool Grinder. The unit is 1 HP 115 V. It runs forward and reverse. One end has the tool grinder and the other end has a buffer. This is used but very little. There was a lamp attached at one time but it is gone. This item is heavy 70 pounds. Motor runs smooth. Made in Tiawan.
Vintage gas engine.flat belt pedistal grinder.old tool
A great useable line shaft driven grinder.it stands 38" from floor to arbor.27" wide.it has a one inch shaft.And a 4" flat belt pully.overall condition is good.thanks i guess i could ship at your cost. Posted with
Old Vintage Antique 1894 NEW CONNECTICUT Meat Grinder No. 20 Kitchen Tool
Old Vintage Antique 1894 NEW CONNECTICUT Meat Grinder No. 20 Kitchen Tool. Age wear and blemishes but fully functional. Very nice! Please see pictures and let me know if you have any questions. I accept Paypal only and only ship to the lower 48 states at this time. No international shipping. California residents will be charged 7.50% sales tax and San Diego County residents will be charged sales tax according to the buyer's local rate. Thanks!
EA Selzer Straight Die Grinder / Router air cutting tool
This auction lot is for an excellent slightly used condition straight die grinder/ router. Made by EA Selzer& Assoc. in Huntington. CA. Model#4007. 1/4" collets. No RPM infomation. My best guess is about 15,000-20,000 RPM. It does not have any on/off switch. It will start running once air is connected. What you see are the actual pictures. Shipping is just $6.00 within USA. Canada $16.50. All other international buyers pay for actual shipping cost. I will combine shipping if you buy more than one item from me. please check out my other ebay items. Posted with the
NORTON TOOL & CUTTER GRINDER, WITH 2 SKIDS OF TOOLING, S/N: 6429 22116
in titles& description Name: NORTON TOOL& CUTTER GRINDER. WITH 2 SKIDS OF TOOLING, S/N: 6429, Ticket# 22116, Manufacturer: NORTON, Item located at: Hanover. MD, Condition: Used, Terms& Condition: As is where i, | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Jiffy APT Hi Torque Drill & Chicago Pneumatic Die Grinder Aircraft Tool Set
These both work great. The 1/4" drill is made by APT. It turns at 1000 RPM's and has a ton of torque. The die grinder is made by Chicago Pneumatic. It turns at 20.000 RPM's and has a lot of torque. It has a standard 1/4" collet. These are surplus from Cessna Aircraft.
Assorted Grinding Stones from a DuMore Tool Post Grinder
A local Vocational Trade School is in the process of closing its Machine Shop program. As a result there will be an assortment of Tools and Accessories available for sale. I will list these items as they are released for disposition. I will do my best to describe these items as accurately as possible. However. Sale is final so please feel free to a sk any questions that you might have. Thank You One of the satellite machine shops is presently being liquidated. The Lathe Chucks. Face Plates and other miscellaneous tools that have been in storage are now being released for disposition. Presently there is a large assortment of Grinding Wheels being released for sale. The wheels have been removed from their original packaging and placed on a shelf for storage in the Grinding Department. By my inspection the grinding wheels look to be unused. ... moreBecause they have been removed from their original packaging and stored as shown, I represent these as being in used condition. Offered here is an assortment of Grinding Wheels that were intended for use on a DuMore Tool Post Grinder. There were 3 model DuMore Grinders being used in this shop. The small Tom Thumb, the 1/4 H.P. Model 44-011, and the 1/2 H.P. DuMore Grinder. I would think that these wheels would also be suitable for use on other small ID or OD Grinding Spindles. The bores look to be 3/8" on the small drum type, 1/2" on the cup and straight wheels, and about 3/4" on the small dish wheel. These Grinding Stones all look to be good quality stones. As a result of sitting in storage some of the wheels have been discolored, but the color is only cosmetic; the stones themselves look to be in good condition. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e0384bc2a-0xf9-
DELTA HOMECRAFT 23-607 GRINDER BENCH GRINDER WHEEL GUARDS + TOOL REST
NOTE PULLEY DRIVE SHAFT AND BELT CAME WITH 8" DELTA TABLE SAW FOR 23-603 HEAD. SEE PHOTOS- NOT BALL BRNG! BUSHING) GUARDS AND TOOL RESTS COULD BE ADAPTED TO OTHER SET-UPS. NO PRIOR USE
Milwaukee 5243 6" Straight Grinder Tool 5500 RPM #6
Description Milwaukee 6" diameter Heavy Duty Straight Grinder 5.500 RPM. 120v. 15A. Used/ Good working Condition. VTR Tool Code#6. PLEASE EMAIL ME WITH ANY QUESTIONS Payment All purchases are expected to be payed within 5 business days. Shipping All Items will be shipped USPS/ Fedex Ground or Freight(LTL) Heavier Items that are listed with freight cost will be shipped via Freight Liner. Freight Charges posted are from our dock to a Business with unloading capability. If you shall require Lift Gate service. And or residential delivery, there will be an additional cost* Please make sure your tel# is posted on Ebay for Freight Co. to get intouch with you at time of delivery. If tel# is not provided. Delivery of freight will be delayed. We do not ship to P.O. Box unless you have no physicall delivery address Buyer is responsible to pay"DUTY& ... moreTAXES" if shipped internationally. Shipping Insurance can be purchased at an extra cost. All items are insured with fedex ground for up to $100 at time of shipping Terms of Sale PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION TO THE BEST OF OUR KNOWLEDGE. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR CONTACT NUMBER IS 718-698-8400 Contact Us Victory Tool Store location 3521 VICTORY BLVD. STATEN ISLAND. NY 10314 WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718-698-8400
MILWAUKEE 6065 7''/ 9'' HEAVY DUTY SANDER GRINDER 5000 RPM INDUSTRIAL TOOL
MILWAUKEE 6065 7' 9' HEAVY DUTY SANDER GRINDER 5000 RPM CONSTRUCTION INDUSTRIAL TOOL. SANDER RUNS WHEN PLUGGED IN. SANDER HAS SCRATCHES, DIRT, WRITING ON IT. THERE IS PAINT MISSING. THE BRUSHES AND AND COMMUTATOR LOOKING TO BE IN GOOD CONDITON WHEN I LOOK IN FROM THE VENT HOLE. I HAVE OWNED THIS SINCE IT WAS NEW AND IT HAS NOT BEEN USED THAT HARD OR VERY MUCH IN RECENT YEARS PLEASE SEE PICTURES FOR DETAILS. I normally ship with FedEx Ground. If returned. The buyer pays shipping both ways.
Milwaukee 5220 Heavy Duty 5" Straight Grinder Tool 4000RPM 11.5A+Grinding Wheels
Milwaukee# 5220 Heavy Duty 5" Straight Grinder in excellent. Perfectly working preowned condition, with the original paperwork and several grinding wheels too This fantastic heavy duty grinder has served me very well and I have upgraded to a larger size. This one has worked perfectly for me for nearly every conceivable kind of metal and concrete grinding. And has never let me down in any way. It works great and is an absolute work horse, it needs nothing. Retail on this today would easily be $300-$400 or more, as the current 5223 Retails for a whopping $460.50, and this is a very similar unit, save a ton off retail and with free shipping in the U.S.A. too! Please check the pictures carefully for the exact age and condition. It's nice Thank you for looking and Insured Priority Mail Shipping is Free in the U.S.A.
DUMORE TOOL POST GRINDER 1/4 H.P. No. 44-011
DUMORE Tool Post Grinder No. 44-011 1/4 H.P. 7.000- 13,000 R.P.M. Condition: Good Questions? call Metro Machine& Tool 908-354-0666
Chevalier Universal Tool and Cutter Grinder Model FCG-610
Chevalier Universal Tool& Cutter Grinder Model FCG-610. Serial# I581B002. Complete with: Special Broach Grinding Fixture to grind Keyway Broaches etc. Including: Indexing Finger& Magnetic Chuck. Includes: Optional Tailstock. Includes: Optional Tap Grinding Fixture. Includes: Optional Radius Attachment. Includes: Diamond Dresser. Ball Bearing Longitudinal Slideway. Forward/Reverse switch for Motor Rotation. Complete Manual& Parts list. Voltage: 120V 3 ph 60 Hz. Plugs into the wall) Weight: approx. 275 Lbs. DIMENSIONAL DRAWINGS MODEL FCG-610 A, 550mm(211/2" B, 220mm(8 1/2" C, 190mm(7 1/2" D, 461mm(18" E, 40mm(1 1/2" F, 150mm(6" G, 540mm(21 1/4" H, max: 283mm(11 1/8" min: 133mm(5 1/4" I, 645mm(25 13/32" J, max: 280mm(11" min: 85mm(3 11/32" Description Units FCG-610 Distance ... morebetween tailstocks mm(in) 250(10) Swing over table mm(in) 205(8) Longitudinal travel of table mm(in) 250(10) Cross travel of saddle mm(in) 160(6 5/16) Work table mm(in) 133x470(5 1/4x18 1/2) Dimension of T-Slot mm 11.1125x20x8 Vertical adjustment of wheel head mm(in) 190(7 1/2) Swivel adjustment of column deg 360° Vertical tillting range of wheel head deg 360° Diameter of wheel(I.D. 1 1/4" mm(in) Saucer Wheel 152(6) Flaring Cup 127(5) Speed of wheel rpm 60Hz. 3450 Motor hp 1ph/120V Net weight kg(lbs) 125(275) Description Units FCG-610 Distance between tailstocks, mm(in) 250(10) Swing over table, mm(in) 205(8) Longitudinal travel of table, mm(in) 250(10) Cross travel of saddle, mm(in) 160(6 5/16) Work table, mm(in) 133x470(5 1/4x18 1/2) Dimension of T-Slot, mm, 11.1125x20x8, Vertical adjustment of wheel head, mm(in) 190(7 1/2) Swivel adjustment of column, deg, 360°, Vertical tillting range of wheel head, deg, 360°, Diameter of wheel(I.D. 1 1/4" mm(in) Saucer Wheel 152(6) Flaring Cup 127(5) Speed of wheel, rpm, 60Hz. 3450, Motor, hp, 1/3 hp. 3ph/220V, Net weight, kg(lbs) 125(275) DIMENSIONAL DRAWINGS MODEL FCG-610 A, 550mm(211/2" B, 220mm(8 1/
J&S FLUIDMOTION RADII & ANGLE DRESSER, GRINDER ATTACHMENT TOOL
Inventory Number: 02131780033 Manufacturer: Description: J&S FLUIDMOTION RADII& ANGLE DRESSER. GRINDER ATTACHMENT TOOL Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be
Hammond D-6 Carbide Tool Grinder
This is a nice HAMMOND double end carbide tool grinder. it is a model D-6. It runs as smooth as new and sounds great. The only thing missing appears to be the wheel guards. Both tanks have drains and hoses thru the base if you want to add coolant. 1/2 HP Motor. 230 volt/ 3 phase 3600 RPM. S/N 15002 Buyer pays all shipping. $50 fee for skidding/ crating for carrier shipment. Payment must be received within 5 days of close of sale. Grinder sold as is
KO LEE Tool And Cutter Grinder #BA960H Made In USA
KO LEE Tool& Cutter Grinder. Model# BA960H, Motorized Work Head, Motorized 5C Collet Head(120V) Numerous 5C Collets& Stand which mounts on table or wall, 2- Manual 5C Collet Indexers, Magnetic Chuck, 2- 3 Jaw Chucks, Work Light, Coolant System with Motor. Pump& Reservoir, Hydraulic System- 3/4Hp. Motor. Reservoir, Pump& Valving, Hydraulic Table Feed, Double Spindle Rotating WorkHead, Table Offsets +/ 15 Degrees, Manuals, Voltage: 220V 3 ph 60 Hz. optional 440V Transformer Available for $390.00) Weight: approx. 1.000Lbs, We arrange all necessary paperwork for customs to cross the border& we pay all Brokerage Duties& Clearing costs. Call Jeff with any questions: 1-204-594-0315 Buyer can pay our $350.00 fixed freight charge or may make their own arrangements Our Website:
Enco Tool & Cutter Grinder
For Sale(1) Used ENCO Tool& Cutter Grinder. No accessories included. We can load at no charge. Buyer Responsible for Shipping. Offered Locally and Subject to Prior Sale. OH Sales Tax is 7% if Applicable. Standard MDNA 30 Day Return Privilege.
Thompson type F tool room grinder
I have a nice thompson tool room grinder to sell. We no longer have a use for it.Magnetic table is 8 inch by 23 and three quarter.Wheel size is 8 inch by three quarter inch, Arbor size is 1 and a quarter, speed 1800/3600.If you need any other info feel free to email.Thanks
Ghines Diamond Tool E40-P35 45° Granite CNC Grinder Polishing Wheel CAT40 Collet
Ghines Diamond Tool E40-P35 P/N 05101 45° Granite CNC Grinder Polishing Wheel W/ CAT40 Tool Holder Old Stock: Some rust around diamond plating but the grinder is overall in very good condition. If it was actually used. It wasn't for very long. The CAT 40 holder is in great shape. THE LAST PICTURE HAS BEEN DIGITALLY ALTERED- DARKENED& CONTRAST HEIGHTENED-TO BETTER SHOW THE PART NUMBER) We aren't stoneworkers. Everything we know about this tool is included in the ad. What you see is what you get! Pictures are taken at the time of listing. If it's not in the photos. It's not included in the lot, unless otherwise stated directly in the ad. Sorry! You can't have the tape measure. We're still using it. Available for local pick up at our office in Hayward. California plus UPS Ground(5-7 days) Insured, to the lower ... more48 States only. Orders to Hawaii& Alaska will be filled only if item can be shipped by US Postal Flat Rate Box. Puerto Rico orders will ship by USPS Parcel Post and cannot be tracked after they have left the United States. If you need it shipped elsewhere. Please contact us for a shipping quote. Depending on your location, your shipping may be less, in which case we will refund the difference. Returns are accepted within 14 days. Re-stocking fees may apply. Please see our full return policy for details. We leave feedback once or twice a month. Leave us a good feedback and we'll leave you good feedback in return. If you have questions or concerns. Please message us, or call Liz or Beth at 510-784-1111. We're here Monday-Friday. 8 am- 4:30 pm PST, and at other times by chance! ~ Thank You For Shopping ~!
MILWAUKEE 5240 STRAIGHT 6" DIE GRINDER 115V ★shop tool ★mechanic ★heavy duty ★★
MILWAUKEE 5240 STRAIGHT 6" DIE GRINDER Comes with grinding wheel already attached. This tool is ready to go to work and make money for you now! 115V = This awesome tool operates on EITHER AC or DC voltage. WORKS GREAT. PLEASE LOOK AT THE PIC'S FOR MORE INFO AND CONDITION. Buyer will receive the EXACT Milwaukee grinder shown in the photos = pictures 1- 3- 4 and 5. 2nd photo is just a'image' of Milwaukee Tools Corporate logo. This item carefully and securely packaged for shipment by professional shipper. INSTRUCTIONS FOR U.S.A. BUYERS We ship only to your address provided to us by PAYPAL–take care to verify the address that is on file with PAYPAL prior to making payment! METHODS OF PAYMENT and SHIPPING DETAILS FOR U.S.A. BUYERS WITH LOWER 48 STATES U.S.A. SHIPPING DESTINATION…Pay for this auction using Paypal…Economy shipping ... moreand handling on this auction listing will be 29.99 to the the 48 LOWER U.S.A. states if your delivery address is a EBAY/ PAYPAL confirmed address Shipping to ALASKA.Guam, HAWAII, APO/ FPO, PUERTO RICO or any US Protectorate not located in the 48 LOWER U.S. STATES will be MUCH MORE EXPENSIVE than rates for 48 LOWER US STATES SHOWN ABOVE-buyers from any of these locations need to figure in the higher shipping costs BEFORE they purchase-if buyers from these locations have an'issue' with these shipping costs- DO NOT PURCHASE THIS ITEM! FOREIGN = NON-USA BUYERS = SEE SHIPPING INFORMATION BELOW) Handling fee of 9.99 is REQUIRED for any shipment to UNCONFIRMED ebay/ paypal shipping address. Sellers are not responsible for service transit time. Note that transit times may vary. Particularly during peak periods.
DUMORE NO. 5 METAL LATHE TOOL POST GRINDER WITH TYPE B & T SPINDLES
DUMORE NO. 5 METAL LATHE TOOL POST GRINDER WITH TYPE B& T SPINDLES Found at a local auction of a closed machine shop. I replaced the cord with a used but good heavy duty extension cord. Plug cap on motor body has a cracked off piece(see pics) but does not cause an issue. Runs great comes with 2 spindles, Type B, Type T NOTE: There are 2 Spindles pictured that WILL NOT BE SOLD with this Machine. They are both 7T-200, Since Listing the item I have found out they go with the next Size Up Dumore Post Grinder. Does come with a manual that I did forget to picture Check out my other items! AS ALWAYS I COMBINE SHIPPING COSTS! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. Money back Guarantee if ... morenot working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
SENECA FALLS R-O ROYAL OAKS SURFACE TOOL & CUTTER GRINDER W/COMPARATOR
Model: RoyalOaks Grinder. Serial# 25R0256. Also includes all pictured collets. Plates, wrenches, manual, etc. Includes all/only items pictured. Here is a rundown of the additional components. Universal Form Relieving Fixture. Serial# 25R0256. R-O Optical Comparator. Serial# 25R0256. R-O Grinder Ball Bearing Motor. Model: 40097-A QD. Power: 220/440V/ 3 Phase/ 60Hz. Type: PN. Frame: HA2Y. HP: 1/2. RPM: 3450. 1.5/75 Amps. Rating: 55deg C. Also includes all pictured collets. Plates, wrenches, manual, etc. Includes all/only items pictured. All items are"as pictured" I have a surplus store. Some"new" items may not include original packaging. I do my best to keep all quantities correct. All items listed on eBay should be in stock. I do not"broker" parts or anything like that. I have been in the trucking/distribution ... morebusiness for a long time. So you can expect your package to be shipped safely. I insure everything with FedEx. And will also personally back up your purchase(shipping, and the product itself) Powered by The free listing tool. List your items fast and easy and manage your active items.
The Cincinnati Tool Co BBA 109 1/3HP 220V Bench Grinder
Manufacture: Cincinnati Tool Co Model: BBA 109 Description: The Cincinnati Tool Co BBA 109 1/3HP 220V Bench Grinder PH 3 Load RPM 2850/345 Load Amp 1.3/1.05 Rise 55°C Specification 7411-PH- power tested only need wheels Condition: sold as is Details: bop221/test/52 Extra Info: 52lbs Please Fully Read our Policy If it's NOT in the picture. Or in the description, then it will NOT be included in this sale. This applies to power cords, cables, manuals and A/C adapter! If you experience a problem Please contact us FIRST! We strive to do our best to work with customers to resolve issues. All of our auctions include notes on the condition of the item(it may require cables or plugs or even more components to function) If it is not in the picture it is Not included. We do stand behind what we sell. We never intentionally sell defective products ... moreunless it is stated as such in the auction(DOA. For repair or parts) If you have a problem with a product, please contact us right away(within 14 days) If an item is listed as"AS-IS" then it is simply that, AS-IS" and can't be returned. There will be no refunds of any kind on AS-IS items. If auction says"parts or repair" the item is NOT Functioning properly, item is described as best as we can, and has No Returns No Refunds. We acquire our equipment from reliable sources. Many of our items are tested in-house. Some items are not tested, either because we trusted the source of the equipment based on their history with us, or because we are unable to test the equipment(this would be because we do not have proper equipment to test or lack of knowledge in the product itself) Although we welcome your questions and inquiries. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases, all information that we have available to us is included in the text of the auction. Any other questions email us or call! Thanks! Payment and Shipping We a
Cincinnati No. 2 Tool And Cutter Grinder Made In USA
Cincinnati No. 2 Tool& Cutter Grinder. Loaded with accesories. Fingers& Fixtures. Motorized 5C Collet Head with Variable Speed Control, Numerous 5C Collets& Stand, 6 Jaw chuck, 3 Jaw chuck, Magnetic Chuck, Radius Attachment, Manual 5C Indexer, Swiveling Vise, Operating& Instruction Manual, Swing between centers: 10" Diam. Max. Length between Tailstock centers: 27" Max. Table Movement: 16"Longitudinal. 8"Cross, Swivels 360 Degrees, Grinding Wheel Head: 7.5" Vertical. Swivels 120 Degrees both ways(240 Deg. total) T-Slots: 9/16" Wide, Table size: 36"x5.25" Voltage: 575V 3 ph 60 Hz. optional 220V or 440V Transformer Available for $490.00) Weight: approx. 2.100 Lbs. We arrange all necessary paperwork for customs to cross the border& we pay all Brokerage Duties& Clearing costs. Call ... moreJeff with any questions: 1-204-594-0315 Buyer can pay our $490.00 fixed freight charge or may make their own arrangements Our Website:
Themac Tool Post Grinder J40
This is a J40 Themac Tool Post Grinder. Grinder looks in good condition. Has some dings etc. Missing the belt flat cover. And the cord does need replacing. I started it and it ran. I do not know the condition of the bearings etc. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e0a975052-0xed-
Themac tool post grinder decent condition in original case J-2A
Used Themac post grinder Model J-2A with accessories Unknown whether complete. But seems to have additional brushes, belts and grinding attachments. As i know little about the machine the sale will be a what you see in the pictures is what you will get. Includes the original case. I plugged it in and it ran, that's about as much as I can say about it.
Chicago Pneumatic mini High Speed Angle Die Grinder. Good Tool!!!! Type RP9101
Up for sale is a Chicago Pneumatic Mini High Speed Angle Die Grinder. Type RP9101. RPM 22500. Nice tool! On all air tools. Not just the ones I sell, make sure you have the air supply needed to power them. For decent power I recommend at the very least a 30 gallon tank and a 3/8 air hose. These revolving tools require a lot of air as they are constantly running full speed. Most of the problems people report to me on air tools come down to this! They will work with a smaller system but not at their best. Understand this when bidding please. I'm sure if you look hard enough you can find one cheaper but has it been tested on professional equipment and does it have a 30 day satisfaction guarantee? This one does! I stand behind what I sell. Returns are accepted! I'm happy to COMBINE SHIPPING with any of my other items. Check them out! A ... morelot of stuff fits in a flat rate box. If you buy multiple items ask for an invoice BEFORE YOU PAY. I can almost always do better than what comes up automatically. Check my feedback and bid with confidence! Payment is expected within 4 days. I'm easy going if you communicate. I test each of these items before listing but I can't take them each to work for a week. If there is any issue please contact me before leaving feedback. Most likely we can work it out! My customers satisfaction and my standing with ebay are extremely important to me! I'm not happy until you are! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e0ad88249-0xf4-
ANTIQUE 1902 McCORMICK-DEERING IH GRINDER / SICKLE BLADE SHARPENER FARM TOOL
See pic tures Additional Info: Please look at other vintage and collectible items we have in our store- Thank you for choosing to look at this item. We appreciate your time and hope that you will become one of our customers. SMALL PRINT By bidding in this auction. You are agreeing to the following terms: Payment must be received within 3 days of auction end. If you need more time. Please notify us via eBay. Time extensions for payment will be at our sole discretion. Payment must be in US dollars through PayPal or credit card via PayPal ONLY. We no longer accept any other method of payment. Illinois Residents must pay 6.25% Illinois state sales tax. This includes local pick-up at our Carbondale/Murphysboro location. IT’S THE LAW. Your payment will automatically include the required 6.25% tax. You agree to pay the listed shipping costs. Our ... moreshipping charges include materials and handling fees that are charged to cover the cost of boxes. Packing materials, and labor to pack and post. We welcome and encourage FREE pick up at our Carbondale/ Murphysboro, Illinois location. There is no charge for this. All arrangements for picking up the items must be made in advance through eBay mail. Shipping fees stated in the listing and FREE SHIPPING(when offered) are good only in the contiguous US. All buyers outside the contiguous US area will need to contact us through eBay to get a shipping quote. REFUNDS: We want you to be satisfied. Refunds must be requested within 14 days of receipt. Return shipping is responsibility of buyer. FEEDBACK: We gladly return feedback. SHIPPING ADDRESS: For auction winners. We access the USPS shipping services through eBay. All items will automatically be mailed to the address listed in your eBay account. If you want the item to be sent to another address, or if the information in your eBay account is not current, PLEASE contact us directly through eBay immediately to avoid any confusion. COMBINING SHIPPING: If you are bidding on more than one item. And would like to wait to p
Beloit Lenox DBP 3047 980 Air Pneumatic Tool Grinder
TERMS AND CONDITIONS; All products are SOLD AS IS and UNABLE TO TEST unless otherwise noted in the description. Please read complete description and look closely at photos. Please ask all questions. Or request additional information prior to bidding on items. All sales are final, and all products are sold without warranties or guarantee, and no returns are accepted. Shipping Insurance included in Shipping and Handling. All items will be shipped no later than the next business day after CLEARED payment is received by 4pm EST, Monday through Friday. you are bidding on a USED SURPLUS. Beloit Lenox, Air Pneumatic Tool, P/N: DBP 3047 980, SEE PHOTOS) DJ SKID Please Visit Our Ebay Store For More Items!
Rotor Tool Air Grinder Compare to Ingersoll Aro Dotco
Rotor Tool Air Grinder Compare to Ingersoll Aro Dotco SPECIFICATIONS: Model number B77LL060 5/8" x 11 Spindle 9" Disc 6.000 RPM Tested& Works. see"PLEASE READ" section for money back specific) Cat. J 8126 PLEASE READ: We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay store Bullseye Industrial Sales Bullseye Industrial Sales. LLC 221 US Highway 20 Middlebury. IN 46540 SHIPPING: We ship USPS& UPS ground. ... moreWe choose which carrier. If this item is shipped by a LPL freight carrier buyer will need to contact us@ 574-825-4990 for a freight quote. Seller's item will be shipped within 1-5 business days. Powered by
TOOL SURFACE GRINDER GREAT FOR LATHE MILL SHAPER TOOLING OR ALL AROUND MACHINIST
UP FOR GRABS IS A HIGH PRECISION MURAHASHI GRINDER 110 VOLT PRECISION SPINDLE AND BEARINGS ANTI BACK LASH ADJUSTMENTS AT HANDLE ELEVATING COULMN THAT ROTATES WIT VERNIER FOR QUICK SET UP SWIVEL BASE TABLE FOR ANGULAR WORK COMES EQUIPPED AS PICTURED I REMOVED THIS FROM A SCHOOL MACHINE DOES FUNCTION AS IT SHOULD IDLER BELT PULLEY NEEDS ADJUSTING MACHINE COULD USE SOME CLEAN UP MODEL# CC- 7 THIS IS A GREAT UNIT FOR HOME OR SHOP USE TOOL GRINDING OR HARDNED SURFACE GRINDING WILL SHIP WORLD WIDE COMBINED SHIPPING AND LOCAL PICK UP ALWAYS WELCOME PLEASE SEE MY OTHER ITEMS THANKS 248 875 2089
Keller Tool Rotary Grinder Model 60 6000 RPM 5/8" Shaft
Keller Tool Rotary Grinder Model 60 6000 RPM 5/8" Shaft Pneumatic Good Working Condition This listing is for 1 Keller Tool Rotary Grinder USED. Shelf F15 0711500 Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase ... moreprice. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
SIOUX AIR TOOL STRAIGHT GRINDER
WORKS AS SHOULD. PLEASE CHECK PICTURES AND LET ME KNOW IF YOU HAVE ANY QUESTIONS THANKYOU
Abrasive Diamond Tool Co. Diamond Dresser Dressing Grinding Grinder Point AC-1
Description: Here's a Abrasive Diamond Tool Co. Diamond Dresser Dressing Grinding Grinder Point Stamped AC-1. All purpose and truing this single diamond point looks unused but selling as used. If you go the the Abrasive Diamond Tool Co. Website it says the'A" is for fine quality and 3 resetable points. The"C" is for commercial use and the 1 means it's a 1 carat diamond. Shaft size 7/16" Please look at the pictures also as they are part of the item description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. ... moreThanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Milwaukee 28V Cordless M28 Lithium-Ion Grinder (Tool Only) 0725-80
CPO Model 0725-80. List Price: $229.99, CPO Price: $137.98, You save: $92.01(40% Availability: In Stock, Like New. For Less Save an average of 25-30% vs. new. Without sacrificing quality. CPO is the top retailer of reconditioned tools and home improvement products. With a wide selection of thousands of manufacturer tested and certified items that are backed by a full warranty. Big Savings, Like-new Performance, 30-Day Money Back Guarantee, Some items may show slight usage. But are guaranteed to work like new! PHOTO IS REPRESENTATIVE of the model and condition you will receive. 28V Motor delivers 8.000 RPM- For fast cutting and grinding, M28 Li-Ion Battery- 75 cuts of 1/2 threaded rod, Fuel Gauge- Indicates remaining run time, Overload Protection- Prevent over heating and extends tool life, Soft Start- Reduces start-up torque and improves ... moregear life, Large Spindle Lock- For quick wheel replacement, Tool Free Guard- For easy guard adjustment, Battery Lock-Out- Prevents incidentally turning on the tool, Slide On Switch- Reduces user fatigue, Spindle Lock, Yes, Tool Free Guard, Yes, Variable Speed, No, Battery Amp Hours, 3 Ah, Switch Type, Slide, Shipping Weight, 6.45 lbs. Weight, 6.8 lbs. Wheel Diameter, 4-1/2-in, Length, 14-in, Voltage, 28V, Series, M28, RPM, 8.000, Battery Type, M28 Li-Ion, Spindle Thread, 5/8-in-11, 28V Cordless M28 Lithium-Ion Grinder(Tool Only) 0725-20, Tool Only- Battery and Charger Sold Separately, 1 year Milwaukee, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter will not be covered by CPO's return policy or 30-Day Money
INGERSOLL RAND CYCLONE TD200 PNEUMATIC GRINDER TOOL 20,000 RPM
THIS SALE IS FOR AN INGERSOLL RAND CYCLONE TD200 20.000 RPM GRINDER, IT IS IN FLAWLESS WORKING CONDITION, ALWAYS OILED, THIS WAS A PERSONAL TOOL, NO WRENCHES INCLUDED, THIS IS BY FAR THE BEST I'VE USED, IT WILL NOT DISAPOINT. Please ask before you bid or buy. I will answer as quickly, simply and as best I can. Shipping to paypal address only, depending on weight, size and destination, you may get priority shipping. Please leave feedback as the same will be done for you. If you can't leave positive feedback contact me and we'll work it out. Payment is due 24hrs after auction's end. Buy it now payment is due immediately. NO INTERNATIONAL SHIPPING UNLESS I'M CONTACTED FIRST AND SHIPPING QUOTE HAS BEEN GIVEN TO BUYER. Thank you and good luck! Posted with
DECKEL S-11 UNIVERSAL 5 AXIS TOOL & CUTTER GRINDER
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking DECKEL S-11 UNIVERSAL 5 AXIS TOOL& CUTTER GRINDER Ref# 146546 iammdna XGRDTC DECKEL UNIVERSAL TOOL& CUTTER GRINDER* ADJUSTABLE THROUGH 360 DEG. IN 5 AXES* TYPE: S11 S/N: 557 NEW: 1985 WORTABLE ... moreLONGITUDINAL TRAVEL. 7.5" WORKTABLE CROSS TRAVEL. 4" SPINDLE. VERTICAL TRAVEL. 13" SPINDLE AXIAL FEED. 0.187" MAX. WORKPIECE DIA. BETWEEN CENTERS. 13.5" MAX. WORKPIECE LENGTH BETWEEN CENTERS. 37" SPINDLE COLUMN SWIVEL. HORIZONTAL. 360 DEG. SPINDLE COLUMN SWIVEL. VERTICAL. 360 DEG. WORKTABLE SWIVEL. 360 DEG. UNIVERSAL INDEX HEAD SWIVE. HORIZONTAL. 360 DEG. UNIVERSAL INDEX HEAD SWIVEL. VERTICAL. 360 DEG. MAX. WHEEL DIAMETER. 5" MAX. CUT-OFF WHEEL DIAMETER. 8" SPINDLE MOTOR. 1.75 H.P. SPINDLE SPEED RANGE(RPM) 2.000 TO 10k MACHINE TOOL DIMENSIONS. 43.3"L x 31.5"W x 69.3H MACHINE TOOL WEIGHT. 1.145 LBS. FOR A MORE COMPREHENSIVE DESCRIPTION OF THE DECKEL S11 GRINDER. PLEASE GO TO DECKEL'S WEBSITE: http:www.michael-deckel.de/index.php?page=1013 EQUIPPED WITH: STANDARD UNIVERSAL INDEX HEAD#ST 40(DECKEL PART#255201) 3-JAW CHUCK AVAILABLE FOR PURCHASE FOR THIS MACHINE: DECKEL OPTICAL COM
QUEEN CITY MACH. TOOL GRINDER MODEL: 4F, 2HP, 3PH, 220/440V, 1750 RPM, 5.9/2.95A
QUEEN CITY GRINDER MODEL 4F 2 HP 3 PHASE 60 CYCLES 220/440 VOLTS 1750 RPM 5.9/2.95 AMPS S/N: 369506. WITH WIRE BRUSH"WHEEL" WITH PLASTIC GUARDS AND PLACE FOR A LAMP. CHECKED@ 480V. 3PH, RUNS GOOD. PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. ... moreTHE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 476 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities Be sure to add us to your favorites list and check out our other items. RAB/6037/ SURPLUS/ 1) E
DUMORE METAL 15500 RPM TOOL POST GRINDER USED
DUMORE METAL 15500 RPM TOOL POST GRINDER USED YOU ARE BIDDING ON 1 DUMORE METAL 15500 RPM TOOL POST GRINDER USED. SELLING"AS-IS" CONTACT ME DIRECTLY FOR BETTER PRICEING! GREAT CONDITION. POWERS UP AND RUNS SMOOTH. COMES WITH METAL CARRYING CASE AS WELL AS 3 BELTS AND DISKS AS SHOWN IN THE PICTURE. S/N 8119-2427. VOLT- 115. AMP- 2.7. H.P- 1/5. WHEEL DIAM IDLING SPEED SPINDLE PULL MOTOR PULLEY. 1/8" TO 3/4" 30000 1 2. 2" 6900 2 1. CONTACT ME FOR INTERNATION SHIPPING COSTS. PLEASE EMAIL ME IF YOU WOULD LIKE MORE PICTURES. USED. E- 16 Q-1. 5-12-11. My Policies: Another auction from equipment parts sales. Powered by
ATCO PRECISION TOOL CO.ANGLE PLATE COMPOUND TOOLMAKER INSPECTION GRINDER MILL!!
ATCO PRECISION TOOL CO. COMPOUND ANGLE PLATE AS SHOWN! TOOLMAKER USE THESE TO MAKE EDM ELECTRODES OR BLADES AS NEEDED VERY HANDY. LOOK AT ALL THE PICS! SUPER NICE USED TOOL! NOT A MARK ON THIS EXCELLENT TOOL CHECKED WITH MAGNETIC CYLINDER SQUARE FOR ACCURACY. AS SHOWN. GROUND USING HERMANN SCHMIDT SQUARING BLOCK. ATCO LOGO WAS GROUND OFF DURING RE-GRIND BUT WAS A DIRECT PURCHASE FROM ATCO PRECISION TOOL CO. PRECISION GROUND AND CHAMFERED AS SHOWN IN USED CONDITION. MADE BY USA ATCO MICHIGAN TOOLMAKER. LIST FOR A NEW ONE IS NEARLY $500! ANGLE PLATE OR BLOCK MEASURES 2.38" WIDE x 2.78" TALL x 3.973" LONG. THE PLATE HAS(11) TAPPED HOLES 1/4" X 20 IN FACES AND EDGES FOR CLAMPS OR STOPS AS NEEDED. PLATE ALSO HAS(2) DRILLED(9/32" AND COUNTER-BORED(13/32" HOLES FOR 1/4" SOCKET HEAD CAP-SCREWS AS SHOWN VERY HANDY ... moreTO ATTACH AS NEEDED TO JIG-BORE-JIG-GRIND OR BRIDGEPORT OR ANY OTHER PRECISE MACHINE. VERY WELL MADE TOOL THAT WORKS VERY WELL BEING VERY HEAVY AND WELL MADE. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW. I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition
Oliver of Adrian Tool & Cutter Grinder #102LR
OLIVER of ADRIAN TOOL& CUTTER GRINDER Used Oliver Instrument Co. of Adrian. Michigan, USA Model# DPC- 324- B- 60 SR# UCG 465 220v 3Ph drive belt 1 1/2" wide Runs one speed fixture missing handle 56"L x 36"W x 66"H Weight: 1132 lbs. unpalleted As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you Return Policy Within 3 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was ... moreshipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items Be sure to add me to your!
Dumore 21-011 Tool Drill Point Cutter Grinder Machine Complete Working Order
Dumore 21-011 Tool Drill Point Cutter Grinder Machine Complete Working Order Serial# 1669 Ready for use-Has grinding wheels Motor runs very quiet Some pitting. Overall it is a very clean Tool Light works-still has some of the old UL sticker left on it. Fully function Grinder PLEASE see ALL photos included so you can see exactly what you will be getting as the winning buyer.
Dumore 14-011 tool post grinder with metal case and accessories NO RESERVE
NO RESERVE AUCTION- This is a used dumore 14-011 tool post grinder. It was in my fathers estate and I have no use for it. What you see in the photos is what is included. This is a no reserve auction. All sold as is- where is with no warranties or returns. That said it is a clean grinder that I know saw little use. Deposit required in 24 hours with full payment received in 72 hours or item will be relisted. Thank you Shipping to continental US only
MURKENS MG-1 SURFACE GAGE OLD VINTAGE PRECISION INSPECTION TOOL GRINDER MILL!!
MURKENS SURFACE GAGE INDICATOR STAND(TRANSFER/ SQUARENESS GAGE) MURKENS MAKES THESE SURFACE GAGES FOR(HERMANN SCHMIDT#MG1) AND(BROWN& SHARPE#599-585-1 HITE-CHEK) BASE DIMENSIONS: 3 1/2" LONG x 2 1/2"WIDE x 1 3/8 THICK 9" HIGH TO TOP OF UPRIGHT POST 13" HIGH WITH INDICATOR MOUNTING ROD IN VERTICAL POSTION INDICATOR MOUNTING ROD IS.312 IN DIAMETER AND 4 3/4" LONG WITH THREE DIFFERENT MOUNTING DIAMETERS: 217. 220 AND.250 DIAMETERS UPRIGHT POST DIAMETER: 562 DIAMETER BOTH THE INDICATOR MOUNTING ROD& THE UPRIGHT POST HAVE A HARD CHROME FINISH TO PREVENT WEAR HARDENED FINE PITCH SCREW 40 T.P.I. WITH LARGE ADJUSTMENT KNOB FOR PRECISE CONTROL BASE IS HARDENED AND LAPPED BACK OF BASE IS GROUND FOR CHECKING SQUARENESS THIS INDICATOR STAND IS IN EXCELLENT CONDITION WITH THE EXCEPTION OF A NAME THAT HAS BEEN LIGHTLY ENGRAVED ... moreON THE SIDE. IT APPEARS TO HAVE BEEN USED VERY LITTLE IF AT ALL. EVERYTHING MOVES SMOOTHLY& FREELY& THE INDICATOR ARM LOCKS UP TIGHTLY. JUDGING FROM THE LARGER DIAMETER UPRIGHT POST(562 AS OPPOSED TO.500) AND THE LONGER INDICATOR MOUNTING ROD THIS GAGE APPEARS TO BE A NEWER VERSION BROWN& SHARPE MODEL. WHICH IS PRICED IN THE MSC CATALOG AT OVER $500. 00 The Design. The innovative design of the Murkens Gage makes it one of the most rigid bases you will ever use. This rigidity greatly increases the repeatability of your indicator while decreasing the number of adjustments necessary during use. The simplicity of the mechanism results in fewer moving parts to repair or gnt replace. The overall performance of this gage is most impressive. The Features. Spring steel front for rigidity. Hardened-40 screw with extra-long brass bushing. Blackened for appearance and rust resistance. Built-in bar for checking squareness. Hardened bottom with dirt grooves. Large diameter adjusting knob for sensitivity. Wrench hole in end of chromed rod for tightening/loosening. Spring-loaded indicator rod prevents nose-diving. 10" chromed rod for tall work pieces. Product Specificati
PLANET NSK 550 65,000 TOOL JIG GRINDER HEAD 3/4 SHANK
DESCRIPTION: LIGHTY USED. NSK PLANET 550 GRINDER HEAD. IT COMES WITH WHEEL, WRENCH ES. COLLETS(SIZES MARKED 6.35 AND 3.17 5) CASE(MISSING LATCH) THE ONLY WAY I CAN T E ST I T IS WITH A BLOWGUN FROM A COMPRESSOR; IT SPINS. THE GRIN DER DOES NOT LOOK LIKE I T WAS USED A LOT. THE MOUNT SHAFT IS 3/4" LOOK AT THE PICTURES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED ... moreIN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value o
Chicago Pneumatic High Speed Sander / Grinder 1 Good Tool! - Model CP778
Up for sale is a Chicago Pneumatic High Speed Pistol Type Sander/Grinder. Model CP778. Nice strong tool! Variable speed! 14000 RPM. This is a multiple listing. Only one of them has a sanding pad, the other does not. Does have previous owner markings. I'm sure if you look hard enough you can find one cheaper but has it been tested on professional equipment and does it have a 30 day satisfaction guarantee? This one does! On all air tools. Not just the ones I sell, make sure you have the air supply needed to power them. For decent power I recommend at the very least a 30 gallon tank and a 3/8 air hose. These revolving tools require a lot of air as they are constantly running full speed. Most of the problems people report to me on air tools come down to this! They will work with a smaller system but not at their best. Understand this when ... morebidding please. I stand behind what I sell. Returns are accepted! I'm happy to COMBINE SHIPPING with any of my other items. Check them out! A lot of stuff fits in a flat rate box. If you buy multiple items ask for an invoice BEFORE YOU PAY. I can almost always do better than what comes up automatically. Check my feedback and bid with confidence! Payment is expected within 4 days. I'm easy going if you communicate. I test each of these items before listing but I can't take them each to work for a week. If there is any issue please contact me before leaving feedback. Most likely we can work it out! My customers satisfaction and my standing with ebay are extremely important to me! I'm not happy until you are! jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e145848e9-0xe2-
Vintage Master Vibrator CO Flexible Shaft ? Hand Grinder Tool
Vintage Master Vibrator CO Flexible Shaft? Hand Grinder# 36772 I do not know much about it. Shaft does turn, brass tag has been broken off selling as is Effort has been made to give an accurate and honest description of this item. Most items I sell are NOT new unless I specify so. therefore. What you see is what you get. All items are sold, AS IS, no returns unless the description was completely inaccurate. If I see any major flaws I will mention them. The most important thing you can do is ASK QUESTIONS! If there are any markings I will mention them so please do not speculate about age. Origin, or manufacturer you might end up disappointed. If you have any questions, please email me, as I would like to answer them prior to purchase, not after. Thanks for looking. And have a great day! INTERNATIONAL BUYERS: Prior to bidding please request-shipping ... moreinformation. Delivery Is Via International Priority Only. Up to a 4.00 dollar charge may apply due to added time used in customs processing. Insurance Disclaimer: Please note that although we take care to package items well. We cannot be held accountable for items damaged or lost in shipping. Your only recourse will be through USPS Insurance so please purchase it or request it be added to your invoice before paying. We will fully comply with any insurance claims you may have.
SURFACE GAGE LUFKIN 521B OLD VINTAGE PRECISION TOOL INSPECTION GRINDER LAYOUT!!
LUFKIN RULE CO. No. 521B HARDENED BASE SURFACE GAGE. ORIGINAL BOX AND PAPER WORK SHOWN ARE INCLUDED. LOOKS LIKE IT IS BRAND NEW AND NEVER USED BUT I WILL SELL IT AS USED. BASE IN EXCELLENT LIKE NEW CONDITION WITH A 4" 7" SPINDLE ROD IN IT! VERY NICELY MADE AND SILKY SMOOTH. BASE HAS NO ENGRAVING ANYHWERE I CAN SEE AS SHOWN. COMES AS SHOWN IN PICTURES. BASE MEASURES USING CALIPERS 1-15/32" WIDE X 2-1/8LONG WITH 1 VEE ON BOTTOM TO BE USED ON ROUND SURFACES OR AS NEEDED. GAGE ALSO HAS THE(2) ALIGNMENT PINS IN BASE FOR LINEAR WORK. CURRENT LIST AT MSC IS $215.00 FOR A NEW GAGE ON PAGE 1343! SAVE SOME$$ HERE! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! THANKS FOR LOOKING! PLEASE LOOK AT OUR MACHINIST ITEMS. WE HAVE MANY VERY HARD TO FIND ITEMS! ... moreI will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I USE A HERMANN SCHMIDT SQUARING BLOCK OR VISE AND A HERMANN SCHMIDT MAGNETIC SINE CHUCK FOR ACCURACY AND THEY DO VERY WELL BOTH PICTURED IN MANY AUCTIONS! I DO NOT JUST CLAIM TO HAVE AND USE THEM I DO USE THEM AND SHOW THEM IN MANY AUCTIONS! I HAVE MANY MANY MORE PARALLELS. PARALLEL SETS, BLOCKS,1-2-3 BLOCKS AND MATCHED SETS OF 2 AND 4 PLUS V-BLOCKS, AND SETS OF V-BLOCKS TO LIST KEEP WATCHING! ALL TOOLS ARE IN GREAT SHAPE DUE TO STORAGE IN A GE
LUFKIN 901 PLANER GAGE VINTAGE OLD USED MACHINIST TOOL INSPECTION LAYOUT GRINDER
LUFKIN VINTAGE 901 UNIVERSAL PLANER GAGE! THIS GAGE IS COMPLETE AND HAS THE FINE ADJUSTMENT AS SHOWN! WOW IS THIS BABY NICE! COMES WITH EXTENSIONS 1" AND 3" STRAIGHT SCRIBE, OFFSET SCRIBE AND LOCKING DEVICE PLUS THE MAHOGANY CASE THAT HAS ENGRAVING. VINTAGE USA AMERICAN TOOLMAKER MADE AS SHOWN! 1" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED(1) 1" WIDE X 5-1/4" LONG. MAX HEIGHT USING BOTH EXTENSIONS IS 10-3/4" GAGE MEASUREMENT RANGE IS FROM 3/8" TO 7-3/4" WITH NO EXTENSIONS! BASE AND SLIDE ARE HARDENED STEEL FORGINGS. ALL SPECS PER LUFKIN CATALOG. FACTORY PRECISION GROUND AND MARKED LUFKIN ON BOTH CASE AND TOOL. THIS IS A LUFKIN 901 AND IN GREAT USED CONDITION AS SHOWN. SLIDE IS SILKY SMOOTH AND APPEARS TO BE MADE SIMILAR TO OUR PRATT&WHITNEY ... more901-A PLANER GAGES HERE. SUPER NICE TOOL IN GREAT SHAPE PLEASE TAKE A MINUTE TO LOOK AT THE 12 PICTURES! ALL SIDES ENDS AND BOTTOMS ARE SHOWN. GAGE HAS ENGRAVING AS SHOWN! BEST SEEN IN PICTURE# 7. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns
STANDARD TOOL MODEL-102 10" WET/DRY TWIN WHEEL GRINDER SHARPENER
STANDARD TOOL 10" WET/DRY TWIN WHEEL TOOL GRINDER SHARPENER SERIAL-45900 TYPE-10TD MODEL-102 8"X19" TILT TABLE 3 PHASE/220V THIS IS A TWIN WHEEL WET/DRY TOOL GRINDER. COMES AS PICTURED. THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION. THERE IS A $25 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" ... morethen you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladly accept PAYPAL or email me about payment options. On Dec-13-12 at 12:53:39 PST.
UNITED TOOL 225 GRINDER UTC, TRAVEL BED KNIFE GRINDER
UNITED TOOL MODEL 225 MOVING TABLE TOOL GRINDER 1 HP 1 PH IT WAS USED TO GRIND TOOLING FOR MOLDING
SRD/TDR TOOL GRINDER DRILL POINTER WITH VARIABLE ANGLE HOLDER
The title is not a complete description so please read the ad description. please scroll down and view all the photos. Bidders please read the ad. Welcome to an listing by Best Bay Machinery sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following call for details 773-392-5055 TDR TOOL GRINDER. WITH VARIABLE ANGLE HOLDER type TDR s/n 110V 1 Phase task light ships in box or pick up will give you the stand Thanks Description from manual TDR TOOL GRINDER. WITH VARIABLE ANGLE s/n 110v 1 PHASE WT IS 4 5# specifications from Manufacturer FYI only! SPECIFICATIONS: Item ships from Chicago 60436 Questions email or call Bob 773-392-5055 Please check our store for the best deals on machinery and tooling at our store! Terms of Sale Bidders please ... moreread all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. See are high positive feedback rating and bid with confidence. I always return feedback so leave some good comments so I can do the same for you. Please see my other auction. You never know what bargains you will find!
Exair Cold Gun Grinder Machine Cooling Tool
You are buying one item. This unit is used. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough infor mation on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: B-170 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff and we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE ... moreTHINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On May-31-11 at 18:04:24 PDT. Seller added the following information:
UNI-GRIND Sharpening Grinder End Mill Tool-Post
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Used UNI-GRIND Sharpening Grinder End Mill Tool-Post Please see all pictures and refer to them for more information, Comes as shown in pictures. Please Check out my other items! Click here to see other items I look forward to trading positive feedback. Once you're item/s arrive please leave feedback then I will do so immediately. If for any reason you are not happy with the item you received. Please contact me and I will do everything I can including a full refund after I receive the item. Thank you. SHIPPING& Handling: Buyer pays $29.95 shipping within the lower 48 State
THE CHAMP DRILL GRINDER TOOL GRINDER MUST HAVE FOR ANY MACHINIST OR SHOP
THE CHAMP DRILL GRINDER DAYTON MOTOR 110/ 220 VERNIERED SCALES FOR ANGLES DEPTHS WILL MAKE/ SHARPEN MULTI POINT AND FLUTE TOOLS EXCELLENT WORKING CONDITION COMBINED SHIPPING ALWAYS WELCOME PLEASE SEE MY OTHER ITEMS THANKS
Rockwell 6" Tool Grinder, Model 23-501
Our Product Categories: Buildings Computers/Electronics Facilities/Maintenance Food Service Furnishings Industrial Equipment Lighting Motor Vehicles/Trailers Musical Equipment Printing/Graphics Shop Equipment/Tools Sporting Goods Miscellaneous Item Location: Dawson. MN Inspection Dates: April 18 or 19 Pick-Up Dates: April 29 or 30 Rockwell 6" Tool Grinder. Model 23-501 DESCRIPTION Rockwell 6" tool grinder with adjustable angle tables. Motor: 3 phase. 1/2 HP, 230-460V. Catalog# 23-501. DIMENSIONS 24" Wide x 14" Deep x 47" High CONDITION This item is used and sold as is. It has been repainted and shows signs of normal wear that are consistent with use. Item was fully operational at last use. PRODUCT IS LOCATED IN DAWSON. MN. LOCAL PICK UP ONLY. CANNOT FREIGHT THIS ITEM. ADDITIONAL PHOTOS(CLICK TO ENLARGE) This item ... moreis located in Dawson. MN, approximately 150 miles west of Minneapolis, MN. LOCAL PICKUP ONLY. Inspections will be held for this item at this location on April 18th or 19th. From 9:00 AM- 3:00 PM. If you wish to inspect this item please contact MidwestRMG by clicking on the"Ask seller a question" link in the listing. Please provide us your name and contact phone number that you can be reached during normal business hours. Within one(1) business day we will provide you with the inspection location directions and contact information. You must arrive during the inspection time listed in order to view the product. This product is easily accessible but heavy. Buyer is responsible for all equipment. Tools, personnel and transportation needed for loading and removal of the product as there is limited equipment on-site. This item is scheduled for pickup on April 29th or 30th. From 9:00 AM- 3:00 PM ONLY. In order to confirm pickup on one of the dates listed. Payment must be received at least one(1) business day prior to pickup unless other arrangements have been made in advance by contacting MidwestRMG directly. Pickup information will not be provided until payment has been made.
dumore tool post grinder 5-021
Grinder is in excellent condition.Runs smooth with no bearing noise.1/2 hp motor. I will crate this item.
Helix Point Steptool 5C MOTORIZED WORK HEAD 110V TOOL & CUTTER GRINDER
Helix Point StepTool Relief Grinding fixture. 5C MOTORIZED WORK HEAD 110V TOOL& CUTTER GRINDER, runs fine, variable speed takes 5c collets, the head has a mechanism that moves it in and out as it rotates
weldon tool grinder fixture, air bearing grinding tool for Cutters
Weldon tool grinder fixture. Air bearing grinding tool fixture for Cutters as show in very good condition.
GRINDING WHEEL DRESSER bench grinder tool DESMOND URBANA, OH USA
Grinding Wheel Dresser Desmond Urbana. OH USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Dumore Tool Post Grinder Model 14-011 Excellent Condition ~See Video Working~
This auction is for a Dumore Tool Post Grinder Model 14-011 Excellent Condition. This unit has very minor scratches and scuffs and is in great working condition. Please see pictures and short video below of this Dumore Tool Post Grinder Working. 14-011 Integral Spindle Tool Post Grinder• Motor: 1/14 Hp. Universal. 115V, AC/DC. Grinding Speeds: 10.000-22,500 rpm. External Grinding Capacity: 1/8" to 2" diameter wheels.
Mastercraft 4 1/2" Angle Grinder Tool
This is Mastercraft 4 1/2" Angle Grinder. The grinder is in good condition.has been used a little bit.still in very good condition.
RUSTY old INTERNATIONAL SICKEL BAR GRINDER VINTAGE FARM TOOL Low $$ Hit&Miss
Normal 0 false false false MicrosoftInternetExplorer4. RU RUSTY RUSTY Looks as if all the parts are there. Has Has been out in the weather for awhile. And is for sure quite rusty! The Then again price isn’t too bad. by I Made by International Harvester. Surp Surprisingly heavy. Buy adds $22.oo towards shipping in the lower forty-eight states East of the Mississippi. Or $29 beyond to the West Coast. Tom.
Surface Tool Cutter Grinder Tooling Spindle Adapter Grinding Wheel Sleeve parts
Item. Grinder Spindle adaptor Manufacturer. Unknown Size. In the left photo that hole measures approx. 8935" diameter for a depth of.878" this hole is surrounded by threads and a spanner nut. The threads are approx. 1-1/4" then at the bottom of the.8935" hole starts the small end of the tapered hole inside which has an overall taper length of approx. 417" I am not able to reach down inside with these calipers to measure the small or large end of the taper but the large end is approximately 21/32" and right after the taper ends at the large end it steps up to about.776" diameter with a 1/8" keyway drive slot that extends all the way through the inside tapered section. Overall length. of the entire steel adapter piece is 1.818" Condition. Nice used. Equipped with a 5" diameter cup wheel. We ... moreoffer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the stat
Brown & Sharpe 13 Tool Grinder Spindle
Brown& Sharpe 13 Tool Grinder Spindle Sprins freely Loc. V30D2(Inv.26162) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling ... morecosts. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0