|
SUNNEN WEDGE K8-W K10-W #1250
SUNNEN WEDGE K8-W K10-W LOT OF 1 INVENTORY#1250 USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. ... moreShipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the
|
|
|
peterson tcm 25 Seat and Guide Machine/Kwik Way/Sunnen/Berco
Nice TCM 25 not using since went to cnc come with attachments only thing no pilots since use for my cnc machine can call 928-287-2643 for more information 3 phase also has 3D valves seat cutter tooling you handle freight i will load with fork lift use all the time for fly cutting vw heads. vw cutting stuff not included
|
|
|
SUNNEN HONING MANDRELS WITH MANDREL RACK & DRIP TRAY + STONES *BIG LOT* HONE
SUNNEN TOOLING LOT BIG LOT OF SUNNEN MA NDRELS& RELATED ALL MANDRELS WITH A MACHINE ADAPTER HAVE WEDGE S& RETAINERS IF APPLICABLE D6F-076CS.076-078 K5-155CS.150-155 K5-150CS.150-155 K6-190CH.190-195 K6-195CS.195-200 K8-245AS.245-250 K8-255AS.250-255 K8-260AS.260-265 K8-275AH.275-280 L6-230C H.230-235( 2)L8-245A H& AS.245-250 K10-308CH.308-316 K10-323AH.323-331 K10-354AH.354-362(1)L10-308AH.308-316 BL10-308AH.308-316 BL10-339AH.339-347 NEW SPARE MANDRE LS: 2)K5-150CH. 3)K6-195CS, 2)L6-230CH, 3)K8-260AH, BL8-255AS, BL8-295AS, 5)BL8-295AH, BL8-27 0AS. BL6-235AH NEW WEDGES: 2)K6-W. 2)K8-W, BL8-BL10-W NEW STONES: 10)D6-A67. 9)D6-J95, L8-A43, 7)L8-J95. 4)L8-J83, 3)L8-A59, 6)L8-A59, 7)L8-A59, 3)L10-J47, 5)L10-J47, 5)L10-J95, 12)K10-A55, 12)K10-A57 A FEW MANDRELS HAVE TRUING SLEEVES BUT NOT ALL IN CLU DES MANDREL RACK& DRIP TRAY ALL ... moreIN NI CE CONDITION NIC E CHANCE TO TOOL-UP SHIP S UPS. BUYER PA YS C OST 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e7f548476-0x102-
|
|
|
IDL Seat and Guide Machines/Kwik Way/Berco/Sunnen
Two IDL seat and guide machines.With tooling as shown. Being sold for parts or rebuildable cores,One model 550 and model 650. Both are 110 volt units. $100.00 to pack for shipping. Thanks for looking. Don 425-766-1619?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e833d34c1-0xf1-
|
|
|
SUNNEN HONING MANDREL K5 160CS STEEL MANDREL SLIGHTLY USED
SUNNEN HONING MANDREL# K5-160CS NEW IN BOX INCLUDES: STEEL MANDREL STONE WEDGE PLEASE LET US KNOW IF YOU HAVE ANY QUESTIONS! WE HAVE JUST AQUIRED SEVERAL HUNDRED NEW SUNNEN HONING MANDRELS. TRUING SLEEVES, STONES NEW IN BOXES. IF YOU ARE LOOKING FOR SOMETHING IN PARTICULAR PLEASE DROP US A LINE AND ASK. THANKS AND GOOD LUCK!
|
|
|
SUNNEN MANDREL STORAGE RACK WITH DRIP TRAY HONE MANDRELS
SUNNEN MANDREL STORAGE RACK#SL-3 7 HOLDS 7 MANDRELS AND INCLUDES DRIP TRAYS S&H $15.00
|
|
|
SUNNEN MANDREL STORAGE RACKS WITH DRIP TRAYS HONE MANDRELS *2*
SUNNEN MANDREL STORAGE RACKS LOT OF 2#SL-30 FOR MANDRELS WITH SUNNEN MACHINE ADAPTERS HOLDS 16 MANDRELS AND INCLUDES DRIP TRAYS S&H $17.50
|
|
|
SUNNEN 2G-P28-1062VA HONING MANDREL 1-1/16" + SLEEVE
aims SUNNEN 2G-P28-1062VA HONING MANDREL 1-1/16" + SLEEVE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in USA by Sunnen Products Co. of St. Louis. Missouri. This is a Sunnen Honing Mandrel in Good condition. Model# 2G-P28-1062VA Features: Open holes with no interruptions. Open holes with keyways or splines Open holes with tandem lands Blind holes Bowed holes. Holes with a counterbore or overhang. Specifications: Mandrel size: 1 1/16" Mandrel head ... moredia: 1 1/2" Mandrel body length: 10 1/4" Overall length: 12 1/2" Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUNNEN 2G-P28-1062VA HONING MANDREL 1-1/16" + SLEEVE Reliable Tool Inc. c 2011 | Powered by
|
|
|
SUNNEN CRH105A heater coil for CRH50 or CRH60 rod heaters.
Used but in good condition.great for a spare part.
|
|
|
SUNNEN CR2900 Rod reconditioning mandrel--nt KwikWay, Goodson.
Excellent condition. Range 2.900" to 3.100" Complete with high and low wedge plate.
|
|
|
SUNNEN 3ML857M or 3GP20-875UB mandrel-----new $250.
Listed as"used" but probably new. Complete with bronze shoes. Range.869" to.906"
|
|
|
SUNNEN CR2500 Rod reconditioning mandrel--nt KwikWay, Goodson.
Excellent condition. Range 2.500" to 2.700" complete with high and low wedge plate.
|
|
|
SUNNEN PK8A Honall adapter---new value $55
Used in the P180 and P190 SUNNEN Honall devices. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e8451505b-0xf8-
|
|
|
SUNNEN CK10 main drive generating unit..nt KwikWay, Goodson.
Excellent condition. This item contains the main connecting rod and dwell components that. When activated, make the machine go into the"dwell mode" Hooks up to the drive reducer. This item is obsolete from SUNNEN. If you accidentally hit the bottom of a web in a block you could easily damage this part and put your CK10 out of commission. This is a great part for a future spare and peace of mind.
|
|
|
SUNNEN HF300 loop grip holding fixtures.
Used. Torque absorbing fixture.especially useful for hard to hold parts such as thin wall tubes. Valve spools, small parts with smooth surfaces and parts with sharp projections. A must for absorbing torque on most power stroking jobs. Usually uses emery cloth to grip the part securely.
|
|
|
SUNNEN ALR960 bushing expander mandrel with cutter----new approx. $300.
Listed"used" but probably new. Used to expand new bushings into rods. Complete with AL12 facing cutter to trim bushing edges square and clean. Range.960" to 1.080"
|
|
|
SUNNEN MODEL MBB-1660 HORIZONTAL HONING MACHINE
LIGHTLY USED. TONS OF TOOLING MOTIVATED TO SELL MUST GO! BUSY SHOP NEED SPACE. WASHINGTON,PA 15301 NEAR PITTSBURGH,PA.060-6.50' DIA X UP TO 16" LONG BORES. 200-2500RPM 16 GAL TANK 30X60X63 FLOOR SPACE 630# NET WT 110V SINGLE PHASE POWER
|
|
|
SUNNEN AK20 HONING MANDRELS LOT Various Sizes
ebay template AK20 Honing Mandre ls Lot of Various Sizes PART No.s INCLUDED AK20-994 AK20-962UC 1C AK20-900UC AK20-869UB and(four) AK20-744UA CONDITION All in good condition with minor wear from previous use. Does not include wedges. Sold as is. Happy bidding. Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards ... moreto payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contac
|
|
|
sunnen honing mandrel 2H-P28-2125
Sunnen Honing Mandrels Mandrel is in good working condition Free Fast Shipping! This mandrel was disassembled.Where nessasary,cleaned and inspected for damage or defects.It is to the best of my knowledge in good working order. Don't Miss Out- Buy Now! Great Price! Free Shipping! Contact us if you have any questions! As the seller. Encore Buys offers a 100% money back guarantee! Your purchase will be packed well and will be shipped quickly. If you are not satisfied. Please be in touch with us through the Ebay message system so that we can agree on a return or a fix before leaving feedback. We do our best to describe the item correctly and take excellent photos to show all aspects of the product. We strive to give you service at the highest possible level but every business can make improvements. We welcome your private comments on possible ... moreimprovements! If you feel the item was somehow misrepresented, We will pay your return shipping as well! We offer a return policy with no questions asked but do request that the item be returned in the original shipping package unused and in the original condition as it was received. Under this kind of return. You will pay the return shipping costs. We offer free shipping in the continental USA through USPS. First Class, Priority, Parcel Post or Media Mail. We use our judgment to select the best service regarding cost and appropriate shipping for the item. Should you need it faster or from a different shipping service. Please contact us to work out a plan. A fee will apply to any change in the shipping service. International buyers. Please contact us regarding cost of shipping. Payment is expected within three days of the sale. The item will be shipped within two business days as soon as payment is confirmed. We will leave positive feedback for you as the buyer when your payment has cleared. Once you receive your order and are satisfied with the transaction. We welcome your positive feedback as well. We pledge to make your purchase experience go as smoothly as possible! W
|
|
|
NEW!! TWO SUNNEN HONING STONE SETS - #N37-A47 - 2.7" TO 4.1"
aims NEW! TWO SUNNEN HONING STONE SETS- N37-A47- 2.7" TO 4.1" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Sunnen Products Co. of St. Louis. Missouri. This is a Lot of 2 New Sunnen Honing Stone Sets. Model# N37-A47 Features: Sunnen abrasives are the most advanced metal-cutting abrasives available in the world today. Their outstanding performance ensures the honing of even the most difficult materials. That until now, have resisted ... morecutting by any method. You'll find they significantly improve cutting action, overall production rates and abrasive life over any other abrasive available. Diameter Range: 2.7" to 4.1" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NEW! TWO SUNNEN HONING STONE SETS- N37-A47- 2.7" TO 4.1" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Sunnen Mandrel Hones w/Adapter Mixed lot of 15
Description Very Good used Sunnen Mandrels w/Adapters Lot of 15 K4 120Ch 6H K6 190 CH K6 235 CH 9F K8 245 AH 6H K8 275 AB K8 280AH 6A K10 308AS 8B K10 339AS K12 400AS K12 463AS Y16 495 BH 7M K16 557AH 9A K20 619AH 6F K10 619AB 1J Sunnen D2-1 Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that ... morewe ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers yo
|
|
|
Sunnen Truing Sleeves ST 1250-1187-1125
Description Excellent used Sunnen Truing Sleeves ST 1250 ST 1187 and ST 1125 Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail ... morefor packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sales outside of the USA are"AS IS" and Final. All selling items
|
|
|
SUNNEN HONING MANDREL SET + TRUING SLEEVES - .308" to .744"
aims SUNNEN HONING MANDREL SET + TRUING SLEEVES- 308" to.744" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in USA by Sunnen Products Co. of St. Louis. Missouri. This is a Honing Mandrel Set in good condition. Sunnen offers a broad range of honing tools and mandrels for almost every application and bore size. Features: Open holes with no interruptions. Open holes with keyways or splines. Open holes with tandem lands. Blind holes. Bowed holes. Holes ... morewith a counterbore or overhang. Specifications: Mandrel Range: 0.308" to.744" Mandrel Body Length Range: 3-1/2" to 13" Mandrel Head Dia: 0.301" to 0.675" Overall Length Range: 7" to 16-1/4" Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUNNEN HONING MANDREL SET + TRUING SLEEVES- 308" to.744" SUNNEN HONING MANDREL SET + TRUING SLEEVES- 308" to.744" SUNNEN HONING MANDREL SET + TRUING SLEEVES- 308" to.744" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Kwik-Way, Cylinder Boring Machine Tooling Kit, Model "F".nt SUNNEN VAN NORMAN
Kwik-Way. Cylinder Boring Machine– Tooling Kit, Model"F" Manufactured in Cedar RapidsEngineering Co. Cedar Rapids, Iowa. It IS MISSING THE# 3 SET OF CENTERING FINGERS ANDE THE OPEN WRENCH This kit is used and sold as is. Please refer to the photos. THANK YOU
|
|
|
SUNNEN HONING MANDREL 2G-P28-1625-WD
Normal 0 false false false EN-US JA X-NONE Sunnen Honing Mandrels Mandrel is in good working condition 2G-P28-1625-WD Free Fast Shipping! This mandrel was disassembled.Where nessasary,cleaned and inspected for damage or defects.It is to the best of my knowledge in good working order. Don't Miss Out- Buy Now! Great Price! Free Shipping! Contact us if you have any questions! As the seller. Encore Buys offers a 100% money back guarantee! Your purchase will be packed well and will be shipped quickly. If you are not satisfied. Please be in touch with us through the Ebay message system so that we can agree on a return or a fix before leaving feedback. We do our best to describe the item correctly and take excellent photos to show all aspects of the product. We strive to give you service at the highest possible level but every business can make ... moreimprovements. We welcome your private comments on possible improvements! If you feel the item was somehow misrepresented, We will pay your return shipping as well! We offer a return policy with no questions asked but do request that the item be returned in the original shipping package unused and in the original condition as it was received. Under this kind of return. You will pay the return shipping costs. We offer free shipping in the continental USA through USPS. First Class, Priority, Parcel Post or Media Mail. We use our judgment to select the best service regarding cost and appropriate shipping for the item. Should you need it faster or from a different shipping service. Please contact us to work out a plan. A fee will apply to any change in the shipping service. International buyers. Please contact us regarding cost of shipping. Payment is expected within three days of the sale. The item will be shipped within two business days as soon as payment is confirmed. We will leave positive feedback for you as the buyer when your payment has cleared. Once you receive your order and are satisfied with the transaction. We welcome your positive feedback as well. We pledge to m
|
|
|
★Superb SUNNEN 30-50.8mm DIAL BORE GAGE SET, 0.01mm reading/300mm Probing Depth★
Superb condition Sunnen 30-50.8mm Dial Bore Gage Set with 0.01 mm graduation I ndicator. Model# GRM-9245. This 300mm deep bore(max. measuring depth) Sunnen bore gage set is furnished with Probe Handle. 0.01mm Dial Indicator with Protective Cover, 4 Carbide Ball Anvils, All O riginal A ccessories. Origi nal C ertificate of C al ibration, Pa rts Cat alog& H ard- S hell Case. There are a c ouple of light scra tches on indicator's crystal Backed by our full refund warranty-see below. BUY IT NOW& SAVE $ $$ WORLDWIDE SHIPPING AVAILABLE- contact us for an ai rmail quote. We're PayPal verified and offer the best. Full refund, warranty on Ebay: 90 days for new items and 60 days for used items(Ebay's listing template has a maximum return policy of 60 days so please disregard as we offer a 90 days warranty for new items) New items ... moreare guaranteed to be free of operational defects for 90 days and used items for 6 0 days. The warranty does not cover buyer's remorse or product abuse/mis-handling of any kind. Returned items must be received in exactly the same condition as when they were shipped to the buyer and contain all original paperwork/accessories etc. The return shipping cost is the responsibility of the buyer. Please note: All item serial numbers are recorded prior to shipping. We carry an extensive inventory of new and used precision measuring tools from only the top tier manufacturers- all at highly discounted prices- please contact us using the"Ask a question" link near the bottom of the listing for our complete tools inventory list. Attention International Buyers! Any applicable foreign import duties/taxes are the sole responsibility of the buyer. Need tools? See our! Our Ebay listings are protected under the United States of America Copyright Laws and therefore may NOT be copied!
|
|
|
Sunnen LBB-1810 Precision Honing Machine
Specifications• Diameter Range Power-Stroked Honing: 1.900"3.300" Diameter Range Manual Honing: 0.370"4.700" Stroking Rates: 40 to 150 strokes per minute• Spindle Speeds: 200 to 640 RPM• Electrical System: 230/460-volt. 3-phase, 60 Hz• Spindle Motor: 1-horsepower• Stroker Motor: 1/2-horsepower• Honing Oil Pump Motor: 1/2-horsepower• Honing Oil Capacity: 25 gallons• Honing Oil Filtering System: Self-contained, 1-1/2 gallons• Floor Space: 49" wide by 72" deep by 67" high• Shipping Weight: Approximately 1100 lbs.
|
|
|
SUNNEN HONING STONE SETS LOT OF 4, M27, N37, IN ORIGINAL BOXES
SUNNEN LOT OF 4 HONING STONE SETS ALL ARE IN THEIR ORIGINAL BOXES. I'M NOT SURE IF THEY HAVE BEEN USED. AS THE BOXES HAVE WEAR. ONE OR TWO APPEAR TO HA VE BEEN USED. BUT THEY ARE ALL IN VERY GOOD CONDITION. MODEL NUMBERS ARE: N37-A65 DIAMETER RANGE 3.5-5.5. N37-J13, M27-A45 DIAMETER RANGE 2.7-4.1, AND N37-A45 DIAMETER RANGE 3.7-5.5" PLEASE CHECK OUT MY OTHER LISTINGS. WE ARE LISTING ITEMS DAILY. THANKS FOR LOOKING AND HAVE A GREAT DAY.
|
|
|
Sunnen Bench Top Hone - Model "MAN" Ser 9698
Used- Good Condition- Vintage Sunnen Bench top honing machine. Model"MAN" Serial number 9698. Does not include any tooling but. Standard Sunnen tooling is what is recommended by the factory. Pictures show everything that comes with the unit. If it isn't in a photo, it is not inclued. One would need to fabricate a link between the foot pedal and the actuating lever based on your particular mounting arrangement. I have seen chain used for this.Ships motor freight or can be picked up locally in Flint, MI. You can arrange shipping or I can get you a quote. If I am getting you a quote, I need to know if the address you are having it shipped to is a business or residential address. I also need to know if you have a dock and/or forktruck to unload with. 3162 Powered by The free listing tool. List your items fast and easy and manage ... moreyour active items.
|
|
|
Sunnen AL20-994LC and AL20-806LB Mandrels with AL20-A Adapters
Description Very Good used Sunnen AL20-994LC and AL20-806LB Mandrels with AL20-A Adapters Plus 4 New L20-J57N stones All Mandrels have used stones. Shoes wedges. Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered ... moreto the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your cou
|
|
|
6 SUNNEN HONING MANDRELS K12-370AS
aims 6 SUNNEN HONING MANDRELS K12-370AS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Sunnen. These are 6 Honing Mandrels in good condition. Mandrel Model#s: K12-370AS Features: Open holes with no interruptions. Open holes with keyways or splines. Open holes with tandem lands. Blind holes. Bowed holes. Holes with a counterbore or overhang. Specifications: Overall Lengths: 6-3/4" Comes as shown in pictures. Check out the photos! if you have any other ... morequestions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 6 SUNNEN HONING MANDRELS K12-370AS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Sunnen CF-1126 Dial Bore Setting Gage 2-6" - DW21
Sunnen CF-1126 Dial Bore Setting Gage 2-6" DW20. Comes as shown in the photo w/ no setting ring. This unit is in good working/cosmetic condition. The gages we are selling are used and may have markings or engravings on them. Please assume they do when purchasing. Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship ... moreyour units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold"with a 5 day right of return" The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
|
K10-323AS SUNNEN HONE MANDREL WITH ADAPTER
SUNNEN HONE MANDREL PART NO. K10-323AS ADAPTER INCLUDED Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13eac979625-0x102-
|
|
|
Sunnen Hone MBB 1800 With Power Stroke Good Condition As Pictured
UNIT IS IN GREAT WORKING CONDITION and PRICED TO SELL ON THIS FIRST LISTING. This product can be previewed at our Mukwonago. WI facility Call Mike@ 262 363 2501. CALL OR EMAIL WITH QUESTIONS. We can help with a freight quote. LTL Flat Bed and local delivery. Loading at our Office will be free. SUNNEN MODEL MBB1800 HONE SPECIFICATIONS: I.D. RANGE: 060" 6.5" DIAMETER RANGE: 125" MIN TO 3.750" MAX. LENGTH RANGE: BORES UP TO 16" IN LENGTH. DEPENDING ON BORE DIA. STROKING RATES: 80. 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200. 250, 320, 400, 500, 640, 800, 1000, 1270, 1600, 2000, 2500 RPM SET-UP TIME: 10 TO 20 MINS. SPINDLE MOTOR: 1 HP STROKER MOTOR: 1/2 HP HONING OIL PUMP: 1/2 HP SEPARATELY DRIVEN HONING OIL CAPACITY: 25 GALLONS FILTER SYSTEM: SELF-CONTAINED FLOOR SPACE. APPROX: 49" W X 72" DEEP X 67" H ... moreWEIGHT Approximately 1.100 LBS ELECTRICS: 220/440 VOLTS. 3 PH, 60 CYC Wired at 220 POWER STROKE Machine will be loaded free of charge on buyer's truck. Buyer's responsible for all shipping charges. Fees or Taxes. ECI can assist buyer in finding the best shipping solution. Machine can be viewed under power at our Showroom. The lathe will be placed on the original factory skid and can be reinforced for Van transport.
|
|
|
SUNNEN HONE TRUING SLEEVE S-265 ACTUAL 0.1267 #7166
DESCRIPTION: SUNNEN HONE TRUING SLEEVE S-265 ACTUAL 0.267 QUANTITY: 1 USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS ON OTHER SUNNEN PRODUCTS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes as there are areas where our experience is limited. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. We only use UPS when the item is too heavy for USPS. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1 busines day and we ship 6 days per week. Shipping charges are the responsibility of the buyer unless otherwise specified ... morein our ad. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping charges are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. Please ask questions prior to buying. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to keep you happy and keep your business. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery-
|
|
|
Sunnen GR-600 (.740-1.190/.0001") Dial Bore Gage Set - DW19
Sunnen GR-600(740-1.190/0001" Dial Bore Gage Set- DW19. This unit is in good working/cosmetic condition. No Tips included(as shown in photo) The gages we are selling are used and may have markings or engravings on them. Please assume they do when purchasing. Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your ... moreunits out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold"with a 5 day right of return" The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13eb7c72aea-0x103-
|
|
|
Sunnen JAA K20 806AH Hone Mandrel-JK20 619AS Mandrel-New Stones
Description Very Good used Sunnen JAA K20 806AH hone Mandrel plus JK20 619AS Mandrel Extra stones New K20J67 qty 1. K20J47N qty 1 and K20A65N Qty.4 Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. ... moreOur shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sale
|
|
|
B1290D SUNNEN HORIZONTAL HYDRAULIC HONE - #24986
QUOTE# 24986. B1290D SUNNEN HORIZONTAL HYDRAULIC HONE New 1951. Serial No 115045, Model B1290D QUOTE# 24986. EQUIPPED WITH: Self Energizing Friction Brake 12 Gallon Honing Oil System CATALOGUE SPECIFICATIONS: Diameter Capacity. Minimum. 120" Diameter Capacity. Maximum. 2.625" Work Length. Maximum. 18" 4) Spindle Speeds. Range. 300 to 850 RPM. Spindle Drive Motor. Horsepower/RPM. 0.5 HP/1750 RPM. Electrical System. 115/1/60. Overall Dimensions. W x D. 2'6" x 2'6" Overall Height. 4'10" Weight. Approximately. 850 LBS. PRICE: F.O.B. OUR WAREHOUSE. $1.250.00.
|
|
|
Sunnen Truing Sleeve S-375 Actual .372
Used- Good Condition- Sunnen Truing Sleeve S-375 Actual.372 2612 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sunnen Eclipse ECA-3500 Honing System with Automation Package
Liberty Machinery Company You are looking at: Used- Sunnen Eclipse ECA-3500 Honing System with Automation Package* Serial No. 1Y1-1985R New- 2001 LMC#32434 SPECIFICATIONS: Boring Diameter- Manual Stroking.060" 6.50" Power Stroking.060" 4.00" Automatic Sizing.125" 2.00" Spindle Speeds Adjustable in Fine Increments200- 3000 RPM Stroke Rates Adjustable in Fine Increments 60- 500 RPM Stroke Length.236" 6.70" Stroker Motor 1.5 HP Honing Oil Pump Motor 1/4 HP Coolant Pump 1-1/2 GPM Coolant Capacity 32 Gallons Spindle Motor 5.5 HP Electrics 220V/3/60 Pneumatics Required 80 PSI Floor Space Required 64" x 44" Dry Weight 1.600 Lbs. EQUIPPED WITH: Sunnen Automation Package Auto Stone Wear Compensation Automatic Sizing Control Auomatic Sizing Control Probe( ASC Probing) Universal Workholding Fixture Detachable ... moreCoolant Cart Foot Pedal Control*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may also check us out on our website at LibertyMachinery.com Al
|
|
|
sunnen external hone fce .8-1.5
sunnen external hone fce.8-1.5. Posted with
|
|
|
Sunnen Horizontal Hone, Model MBB 1600, Single Phase, Tooled
Sunnen Horizontal Hone. Model MBB 1600, S/N 43360 Machine Specs: ID Range.060- 6.5" Length 16" Speeds 200- 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase. Equipped With: assortment of mandrels. Very Good Condition. Inspect Under Power in Our Branchburg NJ warehouse. Questions Call Dave@ 908-399-8133.
|
|
|
Lot of Assorted Sunnen Hone Stones (Inv.28458)
Lot of Assorted Sunnen Hone Stones(Inv.28458) R28J87- 11 stones R28J97- 10 stones R18A57- 10 stones R28J89- 8 stones R28A47- 9 stones R28A67- 4 stones(52) stones total Loc. 20-W(Inv.28458) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international ... moresales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Sunnen Hone Mandrel 2G-P28-1000VA (Inv.28442)
Sunnen Hone Mandrel 2G-P28-1000VA(Inv.28442) Loc. 20-A(Inv.28442) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal ... moreshipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0 dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13ebf2bc760-0xf2-
|
|
|
Sunnen Hone Mandrel BAL20-96266 (Inv.28439)
Sunnen Hone Mandrel BAL20-96266(Inv.28439) Loc. 20-A(Inv.28439) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal ... moreshipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ebf2bc794-0x106-
|
|
|
Sunnen Hone Mandrel AK20-994UL (Inv.28438)
Sunnen Hone Mandrel AK20-994UL(Inv.28438) Loc. 20-A(Inv.28438) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal ... moreshipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Sunnen Hone Mandrel 26-P28-1750WE
Sunnen Hone Mandrel 26-P28-1750WE Loc 20-A(Inv.28435) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping ... moreand handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Sunnen Hone Body #FBE.400-.800" (Inv.28433)
Sunnen Hone Body#FBE.400-800" Inv.28433) Used Loc. 20-A(Inv.28433) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition ... moreto normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Sunnen CR3900 Rod Mandrel
One Sunnen CR3900 rod mandrel with new shoes.Both stone wedges, it is in fair shape and ready to use. $805.00 new from Sunnen today. $12.50 to pack and ship to the lower 48 states. Thanks for looking. Don 425-766-1619
|
|
|
Nice Sunnen MBB-1660 Hone with Misc Tooling
Nice condition Sunnen MBB-1660 hone 110v with misc tooling. Inspection under power in my Aberdeen. NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
SUNNEN P-200 HONALL HONE SIDEWINDER p-180 p-190 machinist tool kwikway sioux
Here's a Sunnen P-200 Sidewinder Honall hone. The unit is in very good condition2 Sunnen sells these for $1380. Thanks for looking. I ship fast via USPS Priority medium flat rate box! Please email or call 409-866-8200 with any questions. Thanks. Marksmachineshop.com
|
|
|
SUNNEN HONE SETTING MICROMETER BY THE L.S. STARRETT CO. NO. 263 #9034
SETTING MICROMETER FOR SUNNEN HONE MADE BY L. S. STARRETT CO. MODEL NO. 263 3 WRENCHES INCLUDED USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We ... moremust be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless state
|
|
|
SUNNEN MBB-625D PRECISION HONING MACHINE
aims SUNNEN MBB-625D PRECISION HONING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Sunnen Products Co. of St. Louis. Missouri. This is a used Precision Honing Machine in working condition. Model# MBB-625D Serial# 14020 Specifications: Speeds: 300- 450- 650- 800 rpm. Motor: 1 Horsepower. 115/ 230 Volt, 1,725 rpm, 13/ 6.5 Amps, 60 Hz. Electrical: 115 Volt. Single Phase. Overall Dimensions: 28" x 36" x 60" tall. Comes ... moreas shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUNNEN MBB-625D PRECISION HONING MACHINE SUNNEN MBB-625D PRECISION HONING MACHINE SUNNEN MBB-625D PRECISION HONING MACHINE SUNNEN MBB-625D PRECISION HONING MACHINE SUNNEN MBB-625D PRECISION HONING MACHINE SUNNEN MBB-625D PRECISION HONING MACHINE Reliable Tool Inc. c 2011 | Powered by
|
|
|
SUNNEN 16-PIECE HONING MANDREL SET W/ TRUING SLEEVES - 0.108" to 0.869"
aims SUNNEN 16-PIECE HONING MANDREL SET W/ TRUING SLEEVES- 0.108" to 0.869" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in USA by Sunnen Products Co. of St. Louis. Missouri. This is a 16-Piece Honing Mandrel Set with Truing Sleeves in good condition. Sunnen offers a broad range of honing tools and mandrels for almost every application and bore size. Features: Open holes with no interruptions. Open holes with keyways or splines. Open holes with ... moretandem lands. Blind holes. Bowed holes. Holes with a counterbore or overhang. Specifications: Mandrel Range: 0.108" to 0.869" Mandrel Body Length Range: 2-1/2" to 4-3/4" Mandrel Head Dia: 0.100" to 0.867" Overall Length Range: 5-1/2" to 8" Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUNNEN 16-PIECE HONING MANDREL SET W/ TRUING SLEEVES- 0.108" to 0.869" SUNNEN 16-PIECE HONING MANDREL SET W/ TRUING SLEEVES- 0.108" to 0.869" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Sunnen CF-502 0-2" Gage Setting Fixture,use with Rottler,Van Norman,Kwik Way bar
Sunnen CF-502 gage setting fi xture. Range 0-2" Good used condition. See pictures for details. Please judge the condition of this item by the photos. Check out my! For International Buyers: Please be advised that we are not liable for any items shipped First Class International. And items shipped so may take up to six weeks or longer to reach you. Canadian Buyers: Please note that if you select a UPS shipping option. UPS does charge customs fees to you. We do not have any control over this and are not responsible for customs fees. If you prefer to avoid those additional charges, please choose a USPS service when checking out. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ecd91ca40-0xff-
|
|
|
SUNNEN DIAL BORE GAUGE
SUNNEN DIAL BORE GAUGE Here's an older Sunnen Dial Bore Gauge. It does not seem to set using the CF-1126 setting fixture for my GA-2125 gauge. So. I can't tell if it works properly. Looks like the range is 1" to 6" maybe 8" with the 7" adapter. I accept payments via Paypal. All payments must be made within 24 hours of auction ending. If you need additional information or require more pictures. Just email me. Check out my other items currently on eBay. We will gladly combine items to save on shipping.
|
|
|
van norman "per-fect-o" 777 boring bar and kansas instruments stand sunnen
VAN NORMAN"PER-FECT-O" 777 BORING BAR AND KANSAS INSTRUMENTS STAND 777 BORING BAR MODEL.SKC49BB872 SERIAL NO.A4782 TYPE.KC PH.1 HP.1/2 CYC.60 RPM.3450 KANSAS INSTRUMENT STAND MODEL NO.EBS-90 SERIAL NO.28817 USED BUT RUNS GREAT IF YOU HAVE ANY QUESTIONS FILL FREE TO CALL 505-275-3996 BETWEEN 9AM AND 6PM(MT) MONDAY THRU FRIDAY ALL BUYERS ARE RESPONSIBLE FOR SHIPPING WILL ONLY SHIP TO THE LOWER 48 STATES
|
|
|
Sunnen Mandrel 4K (1) BL6-W (Inv.15626)
Sunnen Mandrel 4K(1) BL240CS BL6-W(Inv.15626) Loc.LRV3DS) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping ... moreand handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Sunnen PF151 Oil Filter Cabinet
One Sunnen PF151 remote filter cabinet.Can be used with Sunnen rod hones,CK10 or any style of honing machine. Has built in pump and standard Sunnen oil filter canister,comes with hoses and pick up tray for simple hook up. $50.00 to pack for shipping. Thanks for looking. Don 425-766-1619
|
|
|
PRISTINE!! SUNNEN .090" - 1.500" GAGE SETTING FIXTURE - #PG-400-S
Made in the U.S.A. by Sunnen Products Co. of St. Louis. Missouri. This is a used Sunnen Gage Setting Fixture in PRISTINE condition. The previous owner told me he only used this a handful of times. And had it stored away in a very well kept shop. The pictures really speak for themselves. You're going to be hard pressed to find another Sunnen Setting Fixture in this type of condition that is not new from the manufacturer. Model# PG-400-S This Setting Fixture is used to set the PGE-3000. PG-800, PG-810, PG-700 and PG-710 Precision Bore Gages. Dimensional accuracy is guaranteed to be within +/ 0006mm(000025" from Sunnen of nominal reading over the entire range of the instrument. Features: A size setting fixture permits the size to be dialed in. No feel is necesssary. Gage can be set to size and ready to use in a few minutes. Accuracy ... moreof gage and setting fixture is within 24 millionths. Specifications: Diameter Range: 2.29mm- 38,3mm(090" 1.500" Accuracy: +/ 0006mm(000025" Overall Dimensions: 10" x 2-1/2" x 4-3/4" tall. Comes as shown in pictures. Posted with
|
|
|
Sunnen #MBB-1660 Precision Honing Machine - With PF 150 MS Filter Unit Included!
Gold International Machinery Corporation | Sunnen#MBB-1660 Precision Honing Machine S/N 44975 Our Inventory Number: 7440-700 Technical Specifications: Put the MBB-1660 in your shop and you're ready for any kind of I.D. work. Half a dozen pieces or several hundred.a repeat job or a job you've never run before.production or salvage. Set up and go without delay or a lot of expense. You'll consider this machine a true bargain: In most cases. It pays for itself in just several jobs. The MBB-1660 hones bores of any configuration: 1.5 mm to 165 mm(060 in. to 6.500 in. diameter. 3 mm to 400 mm(1/8 in. to 16 in. long. Regular or odd-shaped parts. Any material. It guarantees precision sizing. Geometric accuracy, and any surface finish you need. All in all, the MBB-1660 is the most versatile, economical bore sizing and finishing machine ... moreavailable today. Features/Benefits Handles all materials in any shape piece. Precision sizing. Geometric accuracy. Provides any surface finish. Fast. Simple setup. Size and finish in one easy operation. Overall dimensions: 30"w) x 60"d) x 63"h) Estimated weight: 630 lbs. Sunnen Honing Oil FIlter Unit- Model PF-150- INCLUDED! FILTER CAPACITY: Paper. 4550 sq/in(29,3 sg/cm) SLUDGE CAPACITY: 75 cin(1230 ccm) FLOW CAPACITY: 1.5 gal/min@ 25 lbs/in2(5.7 L/min@ 1,7 bars) COOLANT CAPACITY: 3.5 gal. 913.3 L) FLOOR SPACE: 30 W x 15 D x 33 H in. w/Support Tube) 762 x 381 x 838 mm) PUMP MOTOR: 1/2 hp(0.37 kW) This item is in very good condition! We will palletize. Cover, and load truck for $205. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of
|
|
|
Sunnen Horizontal Hone No. MBB-1650,.060" to 6" I.D. Range, 200-1600 RPM (23342)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 23342. SUNNEN HORIZONTAL HONE MODEL: MBB-1650 SERIAL NUMBER: 52584 GENERAL SPECIFICATIONS I.D. Range: 060" to 6.50" Length Range: Up to 16" Depending on Bore Diameter Spindle Speeds: 10) 200 to 1600 RPM Honing Oil Capacity: 16 Gallons EQUIPPED WITH 1/2 HP Spindle Motor. 230/460/60/3 Approximate Weight: 650 Lbs. F.O.B. Cincinnati. Ohio 45223. PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street. Cincinnati. Ohio 45223. 513-542-8400. 800-745-6008. Payment Information We ... moreaccept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157. ICCI: Tyler Rose 1-888-773-6785. Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308. All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item. Any item purchased with a pick up or delivery date more than 10 days from date of sale may be subje
|
|
|
Zanrosso 280 Crankshaft Grinder Kwik Way Sunnen Berco
One good condition Zanrosso MTO 280 crankshaft grinder.Comes very well tooled as shown,includes 3 hubs and five grinding wheels,will grind up to a 80 inch long crankshaft. $200.00 to pack for shipping. No problem shipping out of the country. Thanks for looking. Don 425-766-1619
|
|
|
Serv Equip CB1201 Motorcycle Boring Machine/Kwik Way/Sunnen
One Serv Equip I believe model CB1201 small engine boring machine. It seems to operate properly but did not bore cylinder or clean up machine. It is being sold as is! 110 volt. Has boring range of 1.5 to 4 inches. Comes with tooling shown. The micrometer,centering cone, tool bit holder appear NEW. Serv Equip was acquired by Winona Van Norman. $100.00 to properly crate for shipping. Thanks for looking. Don 425-766-1619 o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13ed43dfd46-0xfc-
|
|
|
Nice! SUNNEN MBB-1660 HONE PRECISION HONING MACHINE WITH PF-150 FILTRATION UNIT
Up for auction: SUNNEN MBB-1660 HONING MACHINE WITH PF-150 FILTRATION UNIT S/N 90767 Voltage: 110V Single phase(Standard Household Electricity) I.D. range: 060" 6.5" Length range: 0- 16" Spindle speeds: 200 to 2500 RPM(12 Increments) Spindle motor: 1/2 HP Honing oil capacity: 16 gallons Overall dimensions: 30"w) x 60"d) x 63"h) Estimated weight: 630 lbs. PF-150 Filtration Unit S/N 3187 FILTER CAPACITY: Paper. 4550 sq/in SLUDGE CAPACITY: 75 cin(1230 ccm) FLOW CAPACITY: 1.5 gal/min@ 25 lbs/in2 COOLANT CAPACITY: 3.5 gal. PUMP MOTOR: 1/2 HP This is a really Nice Sunnen Honing Machine with PF-150 Filtration Unit! We have used this in our shop and it is in excellent condition! Bid with Confidence on this item. Check my feedback. The honing machine and filtration unit ships from Carrollton, Texas 75006(Suburb of Dallas) ... moreIf you have any questions email me please. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SUNNEN CR-1900 CONNECTING ROD HONING MANDREL VERY NICE KWIKWAY VAN NORMAN
Here's a Very Nice used Sunnen CR1900 Connecting rod honing mandrel. Very little use and complete. $382.00 from Sunnen or Goodson. My price 199.00! I ship fast in a USPS Priority medium box for about 11$ I also COMBINE SHIPPING on multiple purchases! No shipping games here! Thanks. Mark.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13ed4e2e753-0xf4-
|
|
|
SUNNEN CR-2300 CONNECTING ROD HONING MANDREL VERY NICE KWIKWAY VAN NORMAN
Here's a Very Nice used Sunnen CR2300 Connecting rod honing mandrel. Very little use and complete. $382.00 from Sunnen or Goodson. My price 199.00! I ship fast in a USPS Priority medium box for about 11$ I also COMBINE SHIPPING on multiple purchases! No shipping games here! Thanks. Mark
|
|
|
SUNNEN MANDREL TRUING SLEEVE ST-2000
SUNNEN TRUING SLEEVE ST-2000 Inner Diameter 1.980- 2.125 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13ed4e2e7af-0xf2-
|
|
|
SUNNEN 10-PIECE HONING SLEEVE / ADAPTER SET
aims SUNNEN 10-PIECE HONING SLEEVE/ ADAPTER SET read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in USA by Sunnen Products Co. of St. Louis. Missouri. This is a 10-Piece Honing Sleeve/ Adapter Set in good condition. Sunnen offers a broad range of honing tools and mandrels for almost every application and bore size. Features: Open holes with no interruptions. Open holes with keyways or splines. Open holes with tandem lands. Blind holes. Bowed holes. Holes with a counterbore or overhang. Specifications: Inside Diameters Range: 0.250" to 0.875" Head Diameters Range: 1.250" to 1.770" Overall Lengths: 3-1/4" approx. Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by ... morevisiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUNNEN 10-PIECE HONING SLEEVE/ ADAPTER SET Reliable Tool Inc. c 2011 | Powered by
|
|
|
SUNNEN 10-PIECE HONING MANDREL SET
aims SUNNEN 10-PIECE HONING MANDREL SET read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in USA by Sunnen Products Co. of St. Louis. Missouri. This is a 10-Piece Honing Mandrel Set in good condition. Sunnen offers a broad range of honing tools and mandrels for almost every application and bore size. Features: Open holes with no interruptions. Open holes with keyways or splines. Open holes with tandem lands. Blind holes. Bowed holes. Holes with a counterbore or overhang. Specifications: Mandrel Range: 0.370" to 1.062" Mandrel Body Length Range: 9" to 13-3/4" Mandrel Head Dia: 0.350" to 1.000" Overall Length Range: 11" to 15-3/4" Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other ... moreauctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUNNEN 10-PIECE HONING MANDREL SET Reliable Tool Inc. c 2011 | Powered by
|
|
|
Sunnen Truing Sleeve S-245 Actual .246
Sunnen Truing Sleeve S-245 Actual.246-Used- Good Condition- 2414 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sunnen BL20-619AB 6C Hone Mandrel with Adapter K20-A Truing Sleeve S-619
Description Excellent used Sunnen BL20-619AB 6C Hone Mandrel with Adapter K20-A BL20-A Truing Sleeve S-619 Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are ... moreUPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sales outside of the USA are"AS IS"
|
|
|
Sunnen - Truing Sleeve - ST-840 - ST-843
Sunnen Truing Sleeve ST-840- ST-843- used. Metal is not worn- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-718 - ST-720
Sunnen Truing Sleeve ST-718- ST-720- used. But metal is not worn- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-900 - ST-906
Sunnen Truing Sleeve ST-900- ST-906- used. Metal is not worn- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-780 - ST-781
Sunnen Truing Sleeve ST-780- ST-781- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-960 - ST-968
Sunnen Truing Sleeve ST-960- ST-968- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-900 - ST906
Sunnen Truing Sleeve ST-900- ST906- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-1080 - ST-1094
Sunnen Truing Sleeve ST-1080- ST-1094- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - S-713
Sunnen Truing Sleeve S-713- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ed59b07e7-0xfa-
|
|
|
Sunnen - Truing Sleeve - S-931
Sunnen Truing Sleeve S-931- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13ed59b07a3-0x101-
|
|
|
Sunnen - Truing Sleeve - S-994
Sunnen Truing Sleeve S-994- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen - Truing Sleeve - ST-1000 - used -
Sunnen Truing Sleeve ST-1000- used- Payment is expected within 3 days after purchase. If you are unable to make payment within that time frame please contact me so I know you will need additional time. If there has been no payment or contact after 3 days the transaction will be cancelled. We give feedback automatically when your positive feedback is received. SUN-Bin2
|
|
|
Sunnen MB-750 Adapter Chuck Honing Machine Jacobs Drill Chuck No 36B 3/16"-3/4"
Item for sale is(1) Sunnen MB-750 Adapter Chuck. This adapter has a Jacobs No 36B chuck on it with a capacity of 3/16"3/4" A chuck key is included. The adapter is used. But in good condition. The chuck opens and closes smoothly. Shipped Free in the USA. There is no charge for local pickup in South St. Louis. MO. Please feel free to ask questions! Please check out my other auctions for more tools and other items! Thanks!
|
|
|
k-line 9100 valve compresor sunnen
Can be applied to a wide range of applications. Capable of generating over 400 ft. pounds of compression force. All adjustments are made with the quick adjust arm feature. Eliminating time consuming lead screw adjustment. Reinforced forged steel frame. Durable Nylatron® piston boot to eliminate marring valves. Long lasting dual brushing design provides complete uniform piston stroke support. if you have any questions fill free to call 505 275 3996 between 9am and 6pm(MT) Monday thru Friday. All buyers are responsible for shipping.
|
|
|
van norman 570 rotary broach sunnen
VAN NORMAN 570 ROTARY BROACH hp.2 rpm.1715 volts.220 cyc.60 ph.1 amp.12 fr.213 ser no. 5298 360 used but runs great if you have any question fill free to call 505-275-3996 between 9am and 6pm(MT) Monday thru Friday buyers are responsible for all shipping will only ship to the lower 48 states I have a fork lift to help load if needed
|
|
|
sunnen mandrel K4 125CH
mandral with truing sleeve( this is for 1 mandral only) $2.70 WAS ADDED FOR SIGNATURE CONFIRMATIOM
|
|
|
sunnen mandral K5 ,160 CH
1. K5 160 mandral Ch used 1 time THIS SAL;E IS FOR ONE $2.70 WAS ADDED FOR SIGNATURE CONFIRMATIOM
|
|
|
K10-362AS SUNNEN HONE MANDREL WITH ADAPTER
SUNNEN HONE MANDREL PART NO. K10-362AS ADAPTER INCLUDED Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|