In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
114.01
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included? 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
$
135.67
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description 6-Inch Bench Clamp Vise w/ Swivel Base This 6-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationary and stability of workpieces, so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
114.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included? 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
$
79.96
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ... moreIf you are not sure if this model is right for you, please feel free to contact us. Features: 5-inch Lock Down Vise. High Precision & Simple Operation & Heavy Duty. During workshop operation, many workpieces were minor damaged due to their excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces..
$
289.99
Buy It Now
Free Shipping
Condition: New
Location: Coraopolis, United States
Max Jaw Clamping, 14″ (Jaws on outside position, example: clamping a flat plate on top of vise). Jaw Height Approx. 1.825″ (bed slideway to top of jaw). ... moreJaw Width 6″. Thrust Bearings on lead screw. Max Jaw Opening 6″ (inside position).
$
115.03
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: 6-Inch Powerful and Precise Clamping Vice Our clamping vise has a powerful clamping force and can fix workpieces very securely. This enables ... morethe stationary and stability of workpieces, so they won’t move even slightly if much force has been applied by the fitter. As such, to protect your workpieces from being damaged, materials that are softer than your workpiece could be stacked between workpiece and vise jaws such as paper or soft metal for protection. Premium Quality Structure Powerful Clamping Force High Accuracy Screw Reinforced & Adjustable .
$
59.15
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Precision ground to accuracy. Full 360° swivel base with graduation included. Used in milling, shaping and drilling machines. Angle tight, ... morepostive lock style-lock down type jaws. Jaws interchangeable with industry standard vise. Features:.
$
43.85
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
CNC Self-centering Vise Electrode Fixture Machining Vises Tool 8-55 50-75mm USA. 1X Wire CNC Self-centering Vise Electrode Fixture Machining Tool 8-55 ... more50-75mm. 1X CNC Vise. Large clamping range and high clamping strength.
$
57.71
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 3-Inch Bench Clamp Vise w/ Swivel Base This 3-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
100.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: El Monte, United States
As Shown .
$
385.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
6" CNC Double vise milling lock down hardened. 0004. Jaw opening: 3.5". Jaw width: 6". Jaw depth: 1.485". Bed Height: 3" estimate only . Clamping force: ... more16,000 lbs. Accuracy: Both sides square to bottom: 0.0004".
$
132.00
Buy It Now
$15.50 Shipping
Condition: Used
Location: Dearborn Heights, United States
This vise is used. You can see the condition in the photos. Jaws: 2-31/32" x 1". Jaw Opening Capacity: 3-7/16" Weight: 8 lbs. We will send a new invoice ... moreeach evening.
$
67.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Width of Jaw (mm) Height of Jaw (mm) Jaw Max Opening (mm) Crank Handle Of Lower Base Will Not Touch The Work Table During Rotation. Easy To Lock Position ... moreWith Thumb Screw. Unit Weight Overall height.
$
79.78
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: 5-inch Lock Down Vise. High Precision & Simple Operation & Heavy Duty. During workshop operation, many workpieces were minor damaged due ... moreto their excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. Premium Quality Structure: The jaw of the bench vise is made of 45# steel. After high-frequency quenching, the wear resistance of the jaw is improved and the service life is prolonged. The vise body is HT250 high-quality cast iron forging with good toughness, high strength, and durability..
$
299.99
Buy It Now
$100.00 Shipping
Condition: Used
Location: Port Orange, United States
Includes one set of 2.0 Alum. The ANGLOCK design ensures that the vise remains stable during operation, and it is easy to adjust for different workpieces.
$
129.17
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specifications: Size: 6" Jaw Width: 6" Jaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to .002" on parallelism and Squareness Gross Weight: 59.4lbs (27 ... morekg) Package Dimensions: 18"*13"*6" (45*32*14 cm) Description:.
$
114.00
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included? 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
$
56.34
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 3-Inch Bench Clamp Vise w/ Swivel Base This 3-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
129.56
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specifications: Size: 6" Jaw Width: 6" Jaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to .002" on parallelism and Squareness Gross Weight: 59.4lbs (27 ... morekg) Package Dimensions: 18"*13"*6" (45*32*14 cm) Description:.
$
195.00
Buy It Now
$105.66 Shipping
Condition: Seller refurbished
Location: Harker Heights, United States
This is a very nice Bridgeport milling machine vise with 6” wide jaws. It is in excellent condition overall and operates very smoothly and is tight. It ... morehas been refurbished including thorough cleaning and painting. There are a few minor mill marks on the bes and the main jaw has some nicks, scratches and dings as can be seen in the photos but nothing that impacts the operation of this precision tool. This is a heavyweight vise, weighing approximately 75 lbs. Shipped via UPS Ground to the 48 continental states. 
$
161.69
Buy It Now
$64.93 Shipping
Condition: New
Location: Chino, United States
Used in milling, shaping and drilling machines. Lock down design secures the movable jaw, preventing it from lifting upwards. Precision ground to accuracy. ... moreGet It Quick! AIR, POWER & HAND TOOLS. Why should you buy from us?.
$
100.00
Buy It Now
$18.00 Shipping
Condition: New
Location: Boise, United States
Untitled Document Product Name: Wilton 11614 ML45 4-1/2-inch Low Profile Milling Machine Vise Includes: 1) Wilton 4-1/2 Low Profile Milling Machine Vise ... moreDescription: Features General purpose vise for both milling and grinding applications Ideal for applications where low overall height is necessary Durable construction with fine grain cast iron castings and hardened smooth vise jaws Ground Vise Bed for smooth. Consistent, and precise jaw movement Zinc plated ACME threaded screw provides consistent clamping pressure and durability Highly accurate with beds and bases parallel to Optional 360 Specifications Jaw Width(In. 37347 Opening Capacity Max(In. 4 Jaw Depth(In. 37987 United States: FREE LTL Shipping* In the contiguous 48 states(6-18 Day normal delivery time) Currently shipping for this item is available to the contiguous 48 US states only. Shipping is not available to Alaska or Hawaii. Due to the size and weight of many Freight items. Some Freight items are shipped directly from the manufacturer. If this is the case, it is possible for the manufacturer to be backordered on a product. We will notify you of any backorder situations and give a timeframe at which time you can decide if you would like to wait or receive a full refund for your purchase. We try to minimize backorder situations as much as possible but it does occasionally occur. Free shipping applies to business address with a fork lift. Loading dock, or customer pick-up at the local shipping terminal ONLY. Residential businesses do not qualify as a business address. Contact us before purchasing if you prefer local pickup. If shipping to a residence. Your shipping location must be accessible by a tractor-trailer truck. Truck drivers will not assist in unloading. Please be prepared for this type of delivery, as you are responsible for unloading. There may be additional charges for delivery to residential addresses up to $50, we will contact you before shipping if there are any additional charges such as limited access, wait fees, or lift
$
30.00
Buy It Now
$37.80 Shipping
Condition: Used
Location: Mountain Grove, United States
Hold down set 5/8 inch clamps. Bolts, for Milling Machine Made in China Removal of items will be the responsibility of the buyer and there will be a removal ... moredeadline. Sold As Is– No Returns Sold with no reserve. No minimum. PayPal ONLY.
$
349.00
Buy It Now
$207.73 Shipping
Condition: Used
Location: Glassboro, United States
OLDER KEARNEY TRECKER MILLING MACHINE VISE 6 3/8" WIDE JAWS. IS DIRTY WITH DRIED OIL. SWARF, WORN PAINT AND SOME LIGHT MILLING/ DRILLING CUTS. IN ... moreGOOD WORKING CONDITION. WEIGHT 65 LBS. COMES AS SHOWN AND SOLD AS-IS. LOCAL PICK-UP OR SHIPPING VIA UPS GROUND. BUYER PAYS ALL SHIPPING CHARGES.
$
56.18
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 3-Inch Bench Clamp Vise w/ Swivel Base This 3-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
75.15
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: 5-Inch Bench Clamp Vise w/ Swivel Base This 5-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationary and stability of workpieces, so they won't move even slightly as much force has been applied by the fitter. Specifications:.
$
119.00
Buy It Now
$73.52 Shipping
Condition: New
Location: Madison Heights, United States
O.A.L: 11" of vise body. JAW OPENING: 4". JAW WIDTH: 4". JAW HEIGHT: 1-3/8". CLAMPING FORCE: 9,000LBS. PARALLEL TO EACH OTHER TO 0.0008". PULL-TYPE DESIGN ... moreFOR UP TO 80% LESS DEFLECTION.
$
275.00
Buy It Now
$79.15 Shipping
Condition: Used
Location: Clarksville, United States
aims KURT 6" ANGLOCK MILLING MACHINE VISE- D60 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM ... morePST Made in the U.S.A. by Kurt Manufacturing Company of Minneapolis. Minnesota. This is a'Ang-Lock' Milling Machine Vise in good condition. The original Kurt Anglelock D-Series Vises are the best for precision part clamping on machine tools such as knee-type mills. Grinders, and machining centers. Model# D60 Features: AngLock design assures the movable jaw does not lift. Hardened vise bed. Semi-hard steel screw. 80.000-PSI ductile iron body. Specifications: Jaw Width: 6-1/8" Jaw Height: 1-3/4" Max. Opening: 5-1/2" Overall Dimensions: 18" x 9" x 4-3/4" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KURT 6" ANGLOCK MILLING MACHINE VISE- D60 KURT 6" ANGLOCK MILLING MACHINE VISE- D60 KURT 6" ANGLOCK MILLING MACHINE VISE- D60 Reliable Tool Inc. c 2011 | Powered by
$
131.15
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 6-Inch Bench Clamp Vise w/ Swivel Base This 6-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationary and stability of workpieces, so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
114.01
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
This2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. This Ensures ... morethe Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter.
$
57.71
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 3-Inch Bench Clamp Vise w/ Swivel Base This 3-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
114.01
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included? 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
$
49.99
Buy It Now
$13.00 Shipping
Condition: New
Location: Eagle, United States
The Tap Handle set by Edge Technology is designed specifically for hand tapping operations done on the milling machine. - The low-profile design positions ... morethe tap as close as possible to the tap guide.
$
29.46
Buy It Now
$10.40 Shipping
Condition: New
Location: Chino, United States
Spare Jaws for Pro-Series 4" Vise #3900-2102. Used in milling, shaping and drilling machines. Precision ground for accuracy. AIR, POWER & HAND TOOLS. ... moreWhy should you buy from us?.
$
84.03
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: Type: Bench Vise Jaw height: 1.3" (32 mm) Jaw width: 4" (100 mm) Jaw opening: 4" (100 mm) Jaw material: 45# steel Body material: HT250 ... moregray cast iron Wrench material: QT500 ductile iron Vise Height: 3.9" (98 mm) Max Clamping force: 19 KN Gross weight: 34lbs (11.9 kg) Package dimensions (L x W x H): 15" x 10" x 6" (36.5 x 25 x 15.5 cm) Features :.
$
41.66
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
HRC58 ° Wire CNC Self-centering Vise Electrode Fixture Machining Tool 40Nm Opening distance: 50-75mm Description: A new self centering vise, the claw ... morecan be disassembled and replaced separately, with high hardness and good wear resistance, which is suitable for electrode processing and mechanical parts processing. Specifications: Claw material: stainless steel(440C) Hardness:HRC58 ° Repeat positioning accuracy: 0.03mm Maximum screw torque: 40Nm Opening distance: (8-55 mm) (50 mm-75 mm) Application: holding different sizes of work center unchanged Weights&Dimensions: Weight: 1.1kg Size: 75mm * 54mm * 44mm Features&Highlights: 1.Strong versatility 2.High stability 3.Long service life 4.Large clamping range and high clamping strength Package Included: 1X CNC Vise.
$
59.92
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specifications: 4-inch Lock Down Vise High Precision & Simple Operation & Heavy Duty During workshop operation, many workpieces were minor damaged due ... moreto their excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. Feature: Jaw Material: 45# Steel Body Material: HT250 Gray Cast Iron Wrench Material: QT500 Ductile Iron Vise Height: 3.9" / 9.8 cm Net Weight: 25.3 lbs / 11.5 kg Package Dimensions (L x W x H): 14" x 10" x 5" / 37 x 25 x 13 cm.
$
100.00
Buy It Now
$120.80 Shipping
Condition: Used
Location: San Jose, United States
Introducing the VEVOR 6" Milling Machine Lockdown CNC Vise with a 360° Swivel Base. This efficient tool is made of durable iron material and can hold ... moreup to 15 KN max clamping force. It features a 6" jaw width, 1.2" jaw height, and a jaw opening capacity of 6-1/2". The bench clamp vise has a height of 6 inches and a gross weight of 25 pounds. It comes from China and has not been modified. The bundle includes no additional items. This vise is perfect for clamping and drilling in industrial and manufacturing applications.
$
102.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: 6-Inch Powerful and Precise Clamping Vice. Our clamping vise has a powerful clamping force and can fix workpieces very securely. This enables ... morethe stationary and stability of workpieces, so they won’t move even slightly if much force has been applied by the fitter. As such, to protect your workpieces from being damaged, materials that are softer than your workpiece could be stacked between workpiece and vise jaws such as paper or soft metal for protection. Premium Quality Structure. Powerful Clamping Force. High Accuracy Screw. Reinforced & Adjustable. .
$
399.95
Buy It Now
$99.02 Shipping
Condition: New – Open box
Location: Wilmette, United States
This is an excellent and new/unused condition tool. The item is out of box but has never been used. We are working to provide great condition new and ... moreused tools. We love great communication. You are our priority.
$
125.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
GOOD CONDITION USED 4" SWIVEL BADE PRECISON MILLING MACHINE LOCKDOWN VISE! FITS BRIDGEPORT OR BRIDGEPORT TYPE MILLS LOOKING FOR A GOOD HOME! THANKS ... moreFOR LOOKING AND DON'T FORGET TO CHECK OUT OUR OTHER METALWORKING PRODUCTS AS WELL. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Shipping and Handling Shipping weight: 40 lbs. Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
88.00
Buy It Now
$17.50 Shipping
Condition: New
Location: Boise, United States
Jig Saw Blades. • General purpose vise for both milling and grinding applications. • Durable construction with fine grain cast iron castings and hardened ... moresteel vise jaws. • 4" Jaw Width, 1-3/4 Jaw Depth, 4" Jaw Opening.
$
45.00
Buy It Now
$141.49 Shipping
Condition: Used
Location: Farwell, United States
The item for sale here is a Unique Vise. The only mark on it is Dinamic. It is 57 lbs. It is in good used condition. Help yourself to a good deal! make ... moreSupersized seem small. from Antiques and Auto Parts, Collectibles, Household, and Tools.
$
179.99
Buy It Now
$116.15 Shipping
Condition: New
Location: Coraopolis, United States
Max Jaw Clamping, 11″ (Jaws on outside position, example: clamping a flat plate on top of vise). Jaw Height Approx. 1-5/16″ (bed slideway to top of jaw). ... moreJaw Width 4-1/8″. Thrust Bearings on lead screw.
$
56.82
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description 3-Inch Bench Clamp Vise w/ Swivel Base This 3-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. Features & Details.
$
245.99
Buy It Now
$38.74 Shipping
Condition: Used
Location: Latham, United States
VINTAGE 1985 Manhattan Supply Milling VISE 3 & 1/2" MILLING MACHINE VISE Heavy Duty 30lbs 3 1/2" jaw width
$
79.87
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 5-inch Lock Down Vise High Precision & Simple Operation & Heavy Duty During workshop operation, many workpieces were minor damaged due to ... moretheir excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. Features & Details.
$
499.00
Buy It Now
Free Shipping
Condition: Used
Location: Cleveland, United States
This Brown & Sharpe 5" Universal Milling Machine Tilt/Swivel Vise No. 2 is a great addition to any workshop. Made in the United States, it features a ... morejaw opening capacity of 2-3/4 inches and a jaw width of 5 inches. The vise is perfect for CNC, metalworking, and manufacturing projects, and is compatible with a wide range of workholding and toolholding accessories. It's a versatile and durable option for any workbench.
$
30.38
Buy It Now
Free Shipping
Condition: New
Location: Saranac Lake, United States
Milling vise work stop part locator CNC machine vice machine tool drilling, tapping, milling Clamp Clamping Jaw Kit. Milling Vise Work Stop Part Locator ... moreCnc Machine Tool Clamping Jaw Kit. Steel material.
$
59.15
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Precision ground to accuracy. Full 360° swivel base with graduation included. Used in milling, shaping and drilling machines. Angle tight, ... morepostive lock style-lock down type jaws. Jaws interchangeable with industry standard vise. Feature:.
$
76.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
This 6 inch cross slide vise is an essential tool for fitters. Most work of the fitters is completed by using the clamping vise such as sawing, filing, ... morechiseling and some of assembly and removal jobs. Specifications: .
$
150.00
Buy It Now
$141.98 Shipping
Condition: Used
Location: Wentzville, United States
JET DPAV-4SB 3.5" MILLING MACHINE VISE SWIVEL bench bolt down HARDENED vise Super heavy duty. Fantastic build quality by the top of the line company. ... moreFree US shipping! Enjoy! Weight: 16.0 pounds!
$
175.00
Buy It Now
$191.51 Shipping
Condition: Used
Location: Harwinton, United States
For sale is a Bridgeport milling machine vise.
$
50.93
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Dimensions Jaw Width: 3" Jaw Opening: 2.95" Jaw Height: 1" Weight: 13 Lbs Accurate to 0.002” per 4” on squareness and 0.006” per 4” on ... moreparallelism without base Vise Key: 11.11mm table slot width, 12.00mm base width Features: Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. .
$
60.24
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: 4-inch Lock Down Vise High Precision & Simple Operation & Heavy Duty During workshop operation, many workpieces were minor damaged due ... moreto their excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. .
$
175.00
Buy It Now
$136.71 Shipping
Condition: Used
Location: Houston, United States
Still a very nice vise. We still have to go thru several warehouses as well. Most of the large machines are sold but the tooling is available. Racks and ... moreRacks of Cat 50, cat 40, cat 30 and many others.
$
154.95
Buy It Now
Free Shipping
Condition: New
Location: Bellingham, United States
T27661 Premium Milling Vise 3". T27661 Premium 3" Milling Vise. The T27661 Premium 3" Milling Vise provides secure and accurate positioning of your workpiece ... moreduring milling operations. Perfectly align your best work with this quality 3" milling vise.
$
113.90
Buy It Now
Free Shipping
Condition: New
Location: Meriden, United States
Self Centering Milling Machine Vice with Swivel Base 2" (50 MM) - Quick Delivery Mounted on a Detachable swivel Base calibrated 0 to 360 degrees. Jaw ... moreDepth: 24 mm Maximum Opening: 52 mm Overall Height: 85 mm Base Dimensions: 146 x 100 mm Base Hole Center Distance: 128 mm Vice Hole Center distance: 68.75 mm .
$
130.85
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specifications: Size: 6" Jaw Width: 6" Jaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to .002" on parallelism and Squareness Gross Weight: 59.4lbs (27 ... morekg) Package Dimensions: 18"*13"*6" (45*32*14 cm) Description:.
$
114.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included? 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Former Listings  
 
VERY NICE MACHINIST LOCKING MILLING TOOL VISE
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS VERY NICE MACHINIST LOCKING MILLING TOOL VISE ZOOM INTO PICTURES*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* THIS PIECE CAME FORM A VERY WELL MAINTAINED MACHINIST SHOP. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR ... morePURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated.
Atlas/Craftsman 6" Metal Lathe Milling Vise Jaws
This is a nice set of jaws for a milling attachment. No shipping outside of the United States.
Grand 5" MILLING MACHINE VISE W/ 360 Degree Swivel Base Made In Germany / German
Up for sale is a used 5" Grand Milling Machine Vise with a 360 degree swivel base. It is in good working condition- see photos. The model tag indicates that it was made in Germany. Note: We do not have the handle for it) TERMS: Payment is to be received within 7 days of auction end. Please email any questions before bidding. All sales are final. Payment via PayPal or contact buyer to arrange alternate payment method. Buyer pays actual shipping(see shipping calculator) Illinois residents will be charged 7% sales tax. We will only ship to the continental US.
3 milling vise handles
up for sale 3 milling machine vise handles or drill press vise.heavy duty 3/4 square.1 inch square and and a hex that is 3/4 across flatsCHECK MY OTHER AUCTIONS AS I AM LIQUIDATING MACHINE SHOP TOOLS FROM MY CLOSED SHOP.LOTS TO, SELL AND WILL BE LISTING FOR THE NEXT FEW MONTHS.wILL COMBINE WINNINGS TO SAVE $ OR WILL CRAME AS MUCH AS I CAN IN A FIXED RATE PRIORITY BOX.THANKS AND BID AWAY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14523f681d0-0x105-
SWIVEL BASE FOR MILLING MACHINE FLAT VISE FITS KURT D60 / D675 ETC
SWIVEL BASE FOR MILLING MACHINE FLAT VISE FITS KURT D60/ D675 ETC Click Images to Enlarge ​SWIVEL BASE FOR MILLING MACHINE FLAT VISE FITS KURT D60/ D675 ETC WEIGHT: 24 LBS MEASURES: 13" x 12" x 2" ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 26 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will ... moreapply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We of
Yost 1D Meadville PA Drill Press Machine Vise Milling Machinist Bench Tool Find
Nice Yost mfg co No.1D drill press vise from Meadville. PA. See pictures of actual item you will receive. Many of my items are used and shows signs of use to possibly include dirt. Grease, drill marks, owner etching marks, signs of use, etc. Posted with 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14523f68eac-0x107-
Wilton Usa 6" Machine Vise Milling Drill Press Machinist Tool Find
Wilton 6" vise marked 141031 on bottom. Made in USA. Little stiff but I think it could be adjusted out with the two set screw adjustments. Opens and closes all the way. See pics of actual item. Leadscrew might have a slight bow in it(not sure) Many of my items are used surplus and show signs of previous use and ownership. This may include dirt. Dust, grease, drilling/milling marks, ownership ID marks, etc. Posted with
Kurt D60 Anglock Precision Machine Vise 6" Machinist Milling Machine Tool Find
Used Kurt D60 milling machine vise as seen exact item in pictures you will receive. Kurt ang lock badge on side and marked USA and D60 on bottom with a few other casting marks. Has original Kurt D60 handle minus the rounded end part. Most of my items are used surplus and may contain signs of use to possibly include dirt. Grease, dust, metal chips, previous owner markings, and other signs of use and previous ownership. Handling charge is to pay for crating materials but cash buyers can pick up items free of shipping and handling charges. Posted with
CRAFTSMAN TILTING DRILL PRESS MILLING MACHINE VISE
Max. opening is 2-1/2" There are a few drilling marks and the guides need to be straightened but it does function fine. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14523f69f12-0x10e-
NICE! PALMGREN 4" MILLING MACHINE VISE w/ SWIVEL BASE - #18402
Made in the U.S.A. by Palmgren. This Milling Machine Vise w/ Swivel Base in good condition. Model# 18402. SPECIFICATIONS: Jaw Width: 4" Jaw Height: 1-3/4" Maximum Jaw Opening: 4-3/16" Vise Rotation: 360 degrees Overall Dimensions: 14" x 9-3/4" x 4-3/4" high. Comes exactly as shown in pictures.
LARGE MACHINIST VISE - DRILL VISE - MACHINE VISE - MILLING - GRINDING - DRILLING
Up for sale is a large Drill Vise. Also used on Milling and Grinding Machines. The jaws are 7" wide and open to about 4" I can't find a makers name on it. It is an oldie. It weights about 80 lbs. The vise will ship in two boxes. The vise body in one box. The swivel base with 3 bolts and nuts, and the handle in the other box. USPS weight restictions of 70 lbs per box. I gave it a quick cleaning and oiled it all over. Works smoothly. Please look at the pictures to help with description and condition, ask questions if needed. Please check out my other auctions of fine collectable and usable vintage tools. Thank You.
Chick work holding mill vise QL6 used milling machine cnc tool
This is a Chick QL6 Double lock Vise(Base only) with no jaws(the jaws can be purchased from Chick work holding) These are dirty but fully functional. You are bidding one 1 vise however I have 3 vises available. We are a reputable machine shop in Maryland reducing our unused inventory. Feel free to call with any questions 410-859-5775 Ext 19 Ask for Chip
RARE ATLAS MILLING MACHINE M1-300 SWIVEL VISE WITH NEW CRANK HANDLE FITS SHAPER
RARE ATLAS MILLING MACHINE M1-300 SWIVEL VISE WITH NEW CRANK HANDLE FITS SHAPER Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge RARE AND VERY CLEAN ORIGINAL ATLAS MILLING MACHINE AND SHAPER M1-300 SWIVEL VISE. HAS NEW JAWS AND NEW CRANK HANDLE THAT ALSO FITS THE MILLS DRAWBAR. TWO VERY MINOR WITNESS MARKS FROM PREVIOUS USE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1452ca1eaca-0x114-
one KURT milling machine mill VISE HANDLE ASSEMBLY d80-24a 7/8" HEX
you are bidding for one vise handle. Make your selection when making your payment. long one is marked with kurt brand d80-24a, 7/8 hex, shorter one is marked 80-24 with no brand name. both are 7/8 hex you are bidding for one 014-03-01-24.651 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– NO RETURNS FOR ... moreANY REASON OTHER THAN DEAD ON ARRIVAL YOU WILL BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED. INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos or video of operation for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS M
Massive Vise off Milling Machine, T-Slot, Tray, HEAVY DUTY
This vise is MASSIVE and HEAVY. Operates smoothly.
NICE VINTAGE ANGLE TILTING MACHINISTS MILLING VISE SHIPS TO U.S. FOR $12.35
This nice quality vintage vise has numerous nicks. Dings, and scrapes to the top surface, but no rust, pitting, or damage, and the adjustments work fine. The jaw width is 3 1/2" and the open capacity is 1 78" The base measures 8" by 4 1/2" Priority shipping to the U.S. for 25 pounds will be $ 12.35 or less depending on the ship to location. 100% guaranteed.
MILLING VISE WORK STOP LOCATER 1.5 long x .5 thick machinist tools *2
MILLING VISE WORK STOP LOCATER 1.5 long x.5 thick machinist tools info/sizes: excellent condition I do combine items to save you some cool cash on shipping. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Message me if you need an extension to bid on other items. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. ... moreI will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
Milling Vise Quick Clamp Type 6" x 3" Jaws Two Piece Table Machine NOS
There is no ratchet or wrench handle included. Two pieces as shown for handling longer pieces of work by using entire machine bed. I don't think it was used much if at all and it was stored away in a garage for years. Some discoloration from moisture on areas of the steel jaws. The vice opens and closes smoothly. Actual Jaw Size: 5 7/8" x 2 7/8" Key Slot Width: 11/16" Clamping slot width: 5/8" Weight 29 Lbs. Overall Length(Closed) 13" Width: 7" Square Lug Size: 11/16" This will fit in a Priority Flat Rate box for lowest shipping cost and quick delivery to all 50 states. Free priority shipping included in the Buy it Now price. Check the shipping/payments tab above for other shipping options. Check the catagory in the store for more items. Thanks for looking and questions are welcome. Powered by The free ... morelisting tool. List your items fast and easy and manage your active items.
Palmgren 250 Milling Vise Craftsman 101 Atlas 6" Metal Lathes
Like new Palmgren Milling Vise that works on Craftsman 101 and Atlas 6" Metal Lathes. Will fit many other applications. Jaws are perfect with no gouges or other machine marks. Vise jaws open 2.375" And lift is 2.0" Lathe bed/ways mount is 3.250" Fixed shipping of $20 to lower 48 states. Low starting bid and no reserve.
Kurt Style Bridgeport Vise Stop Milling Machinist Hand Made
Kurt Style Bridgeport Vise Stop Milling Machinist Hand Made Made by Tool maker Surface dirt and discoloration. Surface rust and scratches from use. Look closely at the pictures for more details. Requires a 5/16-18 tapped hole on side of front jaw 2 positions for stop screw Stop Screw and Nut: 3/8-16 5/6-18 mounting screw provided Please contact me for more information or pictures. I will gladly send them to you. Receiving positive feedback is very important to me. I want to make my customers happy. If you have any concerns about your item, please contact me BEFORE leaving feedback. Any concerns or problems will be handled ASAP. I combine shipping and handling on the items I have for sale when possible. I ship the next business day after receiving a cleared payment.
parallel blocks milling vise bridgeport
11 hardened and ground parallel blocks for your milling machine vise or other setups.CHECK MY OTHER AUCTIONS AS I AM LIQUIDATING MACHINE SHOP TOOLS FROM MY CLOSED SHOP.LOTS TO. SELL AND WILL BE LISTING FOR THE NEXT FEW MONTHS.wILL COMBINE WINNINGS TO SAVE $ OR WILL CRAME AS MUCH AS I CAN IN A FIXED RATE PRIORITY BOX.THANKS AND BID AWAY
Brown & Sharpe machinist vise,#2,milling machine, machinist tools
Vintage Brown& Sharpe Universal Vise# 2. 65lbs. 5"jaws, opens 2 3/4" Tilts and swivels great condition. crank handle looks as though its been repaired or welded? But still good Note; found picture in 1938 Brown& Sharpe catalog. Was $110.00 new at that time dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1454119fccb-0x10b-
Small Swivel Milling Vise 2 1/2" wide Aciera ?
Small Milling Vise This is a small milling vise with a built in swivel base. Its not marked with any brand. Years ago I had a very small Aciera Mill. I think it was an F1. I am pretty sure that this vise came came with the mill. I did look for other Aciera vises and it looks like one to me. I am not guaranteeing what brand it is. The jaws are 2 1/2" wide They open about 1.700 Over all its about 6" The base is 4 3/4" x 3 1/2" It moves freely but gets snug on the last 1/2" of opening It has some dings on the sides I guess from zeroing the swivel Feel Free to ask questions
Clausing 8520 Mill Small Milling machine with vise, rotary table, clamp kit
Nice older 8520 classing milling machine. Including 6" rotary table, palmgren rotating vise(chinese version) some collets, 2 drill chucks- 1 with straight shank and 1 with MT-2 shank. Machine is in my basement, so you'll either need to bring some brutes with you or we can disassemble it and move in pieces. This is a nice hobby mill for someone who doesn't want a monster bridgeport. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14544a76538-0x116-
Kurt Milling Machine Vise Swivel Base D60-4
Diameter of the pin 1" The coolant trough has been broken in two places. It does not come with t-bolts. Weight 23 pounds Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
VINTAGE 4" OPENING Precision Toolmakers Vise Machinist Milling
VINTAGE 4" OPENING Precision Toolmakers Vise Machinist Milling.GOOD USED WORKING CONDITION KNOB MAY NOT BE ORIGINAL
Heavy Duty 4" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp AB
Item is missing two nuts 10407-L2-3-AB A fully adjustable heavy duty 4" Cross Slide Vise. Turn your drill press into a milling machine. This cross slide drill press vise features: Heavy duty construction. Jaw width: 4" Maximum jaw opening: 3 1/2" Vise travel: 5 1/2" Vise and cross slide have adjustable shims for fine adjustment, Base size: 9" x 5" Overall unit size 11" x 11" x 6 1/4" Precision threaded clamping and cross slide screws, Cross slides have removable adjusting crank handles Powered by The free listing tool. List your items fast and easy and manage your active items.
Heavy Duty 6" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp AB
Items bottom has a broken plastic piece that is needed for bottom vise to move 10405-L1-3-AB. A fully adjustable heavy duty 5" Cross Slide Vise. Turn your drill press into a milling machine. This cross slide drill press vise features: Heavy duty construction. Jaw width: 6" Maximum jaw opening: 6" Vise travel: 7 3/8" Vise and cross slide have adjustable shims for fine adjustment, Overall height 6 7/8" Precision threaded clamping and cross slide screws, Cross slides have removable adjusting crank handles Powered by The free listing tool. List your items fast and easy and manage your active items.
UNIMAT WATCHMAKERS MINI LATHE SL1000 OR DB200 MILLING TABLE, CLAMPS, AND VISE
Up for bid is a Unimat SL 1000 or DB 200 milling table. Clamps, and vise. Very nice. Free shipping to the lower 48 states.
Kurt 6" Used Double Milling Vise DL600C Steel Jaws 03985
Up for sale is a Kurt 6" used double milling vise DL600C. It is in very good condition with just minor scuffs and scratches. Please ask any questions if needed before buying. This is offered as local pickup but will consider shipping.
Grinding or Milling Vise Swivel Angle 4" X 3" Jaws
Brief History on some of my items I will be listing. I have been in the Cutting Tool Business for almost 40 years. I will be listing many items and Machines related to Cutting Tool Sharpening and Manufacturing. These will be great for a Start up Company or one already in the business. Also if you have a particular need for an item let me know I may have it. Many items are either no longer needed for the ongoing operations of my Business or could be Duplicates. Grinding or Milling Vise Swivel Angle 4" X 3" Jaws Heavy Duty. Not a Toy. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1454cea312a-0x112-
USED Toolex Quick Change Parallel Set for 6" Milling Machine Vise
This is a Quick-Change Parallel Set that will fit in all your popular 6" milling machine vises. That allows you to just slide the different parallel's into position in seconds! The set includes the two master jaws that mount on your vise, they feature a dovetail slot for accepting the different parallels. The 10 piece set of parallels includes the following sizes: 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" and 1.690" on a handy holder for storage. Included will be 2 of each size parallel in the set. The Toolex master jaw part number is QMJ-6000 and they originally listed for $236, the parallel set is a part#QPS-6001 and they listed at $535, for a total value of $771, so this will be a great buy for someone! Sales Tax will be charged for shipments within OHIO unless Buyer has established ... moreaccount with T&S Tool& Supply or has a tax exempt form on file with us. For shipments outside OHIO buyer will be responsible for any taxes that may be due. Check out my and by adding my eBay Store to your Favorites! Visit our website. Available at our Ebay Store Site, for a complete listing of all our products and vendors. It is fully interactive and will show you current pricing and stock availability on thousands of items! We take all the major credit cards and the website features fully automated UPS shipping! Register today to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Titex, Clausing, Jet, Precision Twist, Wilton, Norton, Starrett, Allied, Mitutoyo, Keo, Brown& Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers up to 20mm! Hundreds of special taps from#000 to
Balcrank Metal Vise Handle 7/8" Round Keyed Socket Bridgeport Milling Machine
Item for sale is(1) Balcrank Vise Handle with a 7/8" Round Keyed Drive Socket. The handle is USED. But in Good Condition. Shipped free in the USA. Check out my! Be sure to add me to your!
Kearney & Treacker Mill Milling Vise 9" Wide Jaws Open 7"
Up for sale here is a Kearney& Treacker Mill Milling Vise 9" Wide Jaws Open 7" One of the jaw bolts is missing. This vise is very clean with no drill marks on the resting surface. Used in good condition. Local delivery is available at a reduced rate and pick up is free. Contact me for a freight quote as the calculator is usually wrong. When requesting a quote please include the following information as it will impact the amount of the quote: 1. Zip code of where the item is to be delivered, 2. Is the address a commercial or residential address. And 3. Is there a dock or forklift available at said address? Fee l fre e to ask any questions. SCT3660
L-W Chuck Co 6" Mill Milling Vise Jaws Open 3-1/2"
Up for sale here is a L-W Chuck Co 6" Mill Milling Vise Jaws Open 3-1/2" There was a stop fixture mounted on the top so there are some threaded holes as you can see. But the material resting surface is very clean with no drill marks. Used in good condition. Feel free to ask any questions. JAW009
OTMT OT25032G Gear Drive Mill / Drill Machine with 6" Vise, 110V, Milling
OTMT Gear Drive Mill/ Drill Machine General Info: Stock# CD-141061 Machine Name: OTMT Gear Drive Mill/ Drill Machine Condition: Used. Good Tested: Yes. Good Working Condition Brand: OTMT Model: OT25032G Serial: 11153 Year: N/A Shipping Weight: 1000 Lbs. Shipping Dimensions: 48" L x 44" W x 76" H Location: Stone Mountain. GA Specifications: OTMT Gear Drive Mill/ Drill Machine. Drill Capacity 1.25" Distance from Spindle Nose to Table 17.5" End Milling Capacity.78" Face Milling Capacity 3" 1HP Drive Motor, 110V, 1-Phase, Minimum Distance from Spindle Axis Top column 7.625" Quill Diameter 2.96" Speed Range 95-1500 RPM, Spindle Taper R8, Spindle Travel 5.11" Swivel Angle of Headstock 90°, Table Slot.64" Travel of Table Forward& Backward 6.88" Travel of Table Right& Left 18.75" ... moreCord& Plug. Additional Info: The OTMT Gear Drive Mill/ Drill Machine has been tested and is in good working condition. Unit comes with Heavy Duty 6" Vise& Drill Chuck. There are some broken pieces on unit such as handles& locking levers. But can easily be replaced. This machine can be shown under power for demonstration. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
BRIDGEPORT MILLING MACHINE VISE STOP FIXTURE TOOL machinist tools *C
BRIDGEPORT MILLING MACHINE VISE STOP FIXTURE TOOL machinist tools info/sizes: 3/4" shaft size. See photos for detail I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have ... moreyour shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
Palmgren Swivel & Angle Base for Machinist Vise CNC Milling Machine Vice
Item for sale is(1) Palmgren Swivel& Angle Base. Used. But in good condition. Shipped FREE in USA. Check out my! Be sure to add me to your!
Aluminum Double Milling Mill Vise
Please Check Shipping Costs Before Bidding! Please Look At Complete Listing Before Bidding! Up for Bid is an Aluminum Double Milling Mill Vise Not sure what the purpose of t his vise is but it is in good working order. Found in an estate sale. It is stated above EXACTLY what you will pay for shipping if you are the winning bidder. Please give a positive Feedback on the shipping charges. Since you know up front what you are paying. Thank you for giving good feedback. And if you are not 100% satisfied, please let me know, I will make it right for you. Thank you very much. Please Look At All Pictures As They Are P art Of The Description. No Reserve Fast Shipping PAYMENT: Winning bidders can checkout immediately at the end of the auction through eBay checkout. We will send you an invoice via email at the end of the auction. If you are combining ... moreauctions please contact seller if you wish to combine shipping. DOMESTIC SHIPPING& INSURANCE: Your item will be shipped within 1 business day of receipt of payment. Usually next day shipping after payment. INTERNATIONAL BUYERS EMAIL SELLER FOR SHIPPING QUOTE. RETURNS: We appreciate your business and want you to be satisfied with your purchase. Therefore we attempt to accurately describe our items. In the event you are not satisfied with your item it may be returned. Items may be returned within 14 days of receipt in their original condition and you will be refunded the purchase price less shipping. Handling, and insurance. WE ARE PROUD OF OUR POSITIVE FEEDBACK AND WORK HARD TO KEEP IT. IF YOU HAVE QUESTIONS PLEASE EMAIL THEM TO US BEFORE THE CLOSE OF THE AUCTION. When you receive your item please give us your feedback. Your feedback helps us grow and improve as an eBAy member. If you have a question or concern. Please email us and give us a chance to resolve all issues before you leave feedback. We leave our feedback after you have left feedback for us because the transaction is not complete until we know you are happy. 5 Star Service is Our Goal! We strive to earn 100%
BRIDGEPORT 6” MILLING MACHINE VISE~ONTARIO, CALIF.
BRIDGEPORT 6” MILLING MACHINE VISE USED BUT IN GOOD WORKING CONDITION COMES AS SHOWN( SEE ALL PICS) WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! ATTENTION! EFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48" X 40" PALLET. METAL BANDING, AND STRETCH WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET/CRATE WILL BE EXTRA. PLEASE CALL FOR DETAILS. CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY RETURN SHIPPING MUST BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS TO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ... moreALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? FEEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951 DON'T FORGET TO VISIT OUR STORE TO VIEW A WIDE VARIETY OF USED& NEW INDUSTRIAL MACHINERY. TOOLS, EQUIPMENT, MORE! INVENTORY CHANGING DAILY! THANK YOU FOR YOUR BUSINESS! by adding my eBay Store to your Favorites!
Heavy Duty 4 INCH 2 1/2" Machine Machinist Milling Vise. Used
Heavy Duty 4 INCH 2 1/2" Machine Machinist Milling Vise. Used
6" VISE SWIVEL BASE MILLING MACHINE~ONTARIO, CALIF.
6” VISE SWIVEL BASE USED BUT IN GOOD WORKING CONDITION SHAFT 1-1/4” BOLT PATTERN 7-1/2” ACROSS COMES AS SHOWN( SEE ALL PICS) WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! ATTENTION! EFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48" X 40" PALLET. METAL BANDING, AND STRETCH WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET/CRATE WILL BE EXTRA. PLEASE CALL FOR DETAILS. CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY RETURN SHIPPING MUST BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS TO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR ... moreTO MAKING FINAL PURCHASE! ALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? FEEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951 DON'T FORGET TO VISIT OUR STORE TO VIEW A WIDE VARIETY OF USED& NEW INDUSTRIAL MACHINERY. TOOLS, EQUIPMENT, MORE! INVENTORY CHANGING DAILY! THANK YOU FOR YOUR BUSINESS! by adding my eBay Store to your Favorites!
PALMGREN 250 VISE, MILLING ATTACHMENT ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHES
VERY good quality lathe or milling machine precision vise.Very smooth and precise,very nice shape
KURT D675 CNC MILLING MACHINE ANGLOCK WORK HOLDING FLAT VISE
KURT D675 CNC MILLING MACHINE ANGLOCK WORK HOLDING FLAT VISE Click Images to Enlarge ​ ​KURT MODEL D675 WORKHOLDING HEAVY DUTY CNC MILLING MACINE VISE NO HANDLE INCLUDED ​The Kurt D675 Vise part holding capacity has been expanded to a full 7" A 25 percent increase over the D60 model. Designed to hold parts where datums. Flatness and parallelism is important, this vise is ideal for precision bore, tap, drill, grind and finish operations requiring close tolerance repeatability. The D675 bed height is matched to size 2.875" 73.025 mm) plusmn;0005" The extra capacity and strength of the D675 vise insures handling the highest horsepower milling cuts. And it clamps rigidly with.001" repeatability. Overall dimensions are 19" x 8-1/2" x 5" high. weight 67 lbs. NO JAWS INCLUDED WE DO NOT ACCEPT PAYPAL FOR WILL CALL ... moreITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing
6" D675 Kurt Precision Milling Vise
Up for sale used Kurt D675 6" vise. Looks to be in a very good condition. Opens/closes smoothly. I haven't used it myself since I am not quite at that scale yet. What you see on images is what you will get.
3.5" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine HVY Duty
Used but not abused. A great little helper for drilling. Very light surface rust due to being degreased for shipping. 3.5" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine Heavy Duty•For exact centering and accurate drilling• Cross- slide design provides two-axis precision adjustment for perfect bits placement•Easy sure attachments to any drill press table with multiple mounting lugs•Heavy duty cast iron(HT200) Cast aluminum handle• Outside surface: Polishing. Baking varnish processing•Vise and cross slide have adjustable shims for fine adjustment• Precision thread clamping and cross slide screws. Cross travel: 7-3/8" Longitudinal travel: 7-3/8" Jaw depth: 1-1/4" Maximum jaw opening: 3.5"
Bridgeport Milling Machine Vari speed 3PH 9 x 42 table vise collets
Bridgeport Vertical Milling Machine with Variable speed head. R8 spindle. Motor: 1.5HP 220V 3 Phase 9" X 42" Table Bijur One Shot Way Lube System Work Light Table Vise T nut/Hold Down kit. 11 R8 Collets
6" MACHINE MILLING DRILL PRESS COMPOUND VISE 150
6" MACHINE MILLING DRILL PRESS COMPOUND VISE 150 6" MACHINE DRILL PRESS COMPOUND VISE 150 THE VISE HAS SOME DRILL MARKS SO PLEASE LOOK AT ALL OF THE PICTURES. IT LOOKS LIKE A QUALITY VISE BUT THERE ARE NO MANUFACTURING MARKINGS ON IT ONLY THE NUMBERS 150
Antique Heavy Duty Machinist's Drill Press 7" Opening 4 3/8" Jaw. Milling Vise.
Antique Heavy Duty Machinist's Drill Press 7" Opening 4 3/8" Jaw. Milling Vise. 14" long with handle. 7" jaw opening. 4 3/8" wide jaws. tightning screw is slightly bent and causing the last few inches of turning to be not as smooth. 28 lbs shipping weight Please see pictures for additional details before biding. Please feel free to email me with any questions or concerns. Also check out my other woodworking tools. Antiques and collectables listed.
TWO PIECE MILLING VISE USA 6" JAW WIDTH
TWO PIECE MILLING VISE WITH 6" JAW WIDTH AND 2 1/2" JAW DEPTH. MFG. IN USA BY ROCKFORD ENGINEERED PRODUCTS(REPCO) VERY HANDY VISE FOR LONG WORK! UTILIZES FULL LENGTH OF TABLE.
5" Cross Drill Press Vise Slide Metal Milling 2 X-Y Clamp Machine Heavy Duty AB
Item is missing the handles and has been broken off of the bottom 11501-R2-2-AB. A fully adjustable heavy duty 5" Cross Slide Vise. Turn your drill press into a milling machine. This cross slide drill press vise features: Heavy duty construction. Jaw width: 5" Maximum jaw opening: 4 3/4" Vise travel: 7" Vise and cross slide have adjustable shims for fine adjustment, Base size: 9" x 5" Overall unit size 14" x 15" x 6" Powered by The free listing tool. List your items fast and easy and manage your active items.
CNC DRILL PRESS MILLING MACHINE FLAT VISE 6" CAPACITY
CNC DRILL PRESS MILLING MACHINE FLAT VISE 6" CAPACITY Click Images to Enlarge ​CNC DRILL PRESS MILLING MACHINE FLAT VISE 6" CAPACITY MODEL 150 6" WIDE JAWS(NOT INCLUDED) TOTAL HEIGHT: 4" MEASURES: 20" x 10" x 4" WEIGHT: 54 LBS COMES AS SHOWN IN PHOTOS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require ... morea std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selecti
ATLAS S7-92 ORIGINAL METAL SHAPER MILLING VISE & ORIGINAL FAIRMOUNT HANDLE
ATLAS S7-92 ORIGINAL METAL SHAPER MILLING VISE& ORIGINAL FAIRMOUNT 2 SPEC HANDLE. GOOD SHAPE WITH A COUPLE SCRAPE MARKS IN IT. VISE HAS NO RUST JUST A HEAVY COAT OF AGED PATINA FROM SITTING IDLE AND WILL CLEAN UP REAL NICE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
MILLING MACHINE SPEED HANDLE STEEL VISE LATHE MILL DRILL PRESS
MILLING MACHINE SPEED HANDLE STEEL VISE LATHE MILL DRILL PRESS 3/4" BORE WITH KEYWAY. In nice condition with minor surface rust.
Kurt type 6" vise for milling/drilling machine
Selling a 6" vise for milling/drilling machine. It is a Kurt type. But we could not find a manufacturers name. In good condition. Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. THIS ITEM WILL BE WELL PACKAGED AND SHIPPED VIA UPS. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
MACHINIST LATHE MILL Small Palmgren Milling Grinding Vise 2 1/2"
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
Used Glacern Machine Tools GDV-620FE CNC Milling Machine Double Vise (DL640)
Have had these just over a year in my one man shop. They work fine have some coolant stains and one has a jaw messed up from an end mill crash but it's just cosmetic it works fine. The others are almost like new. Just got a new cnc and decided to upgrade to kurt. This auction is for one but three are available.
4 Inch Milling Machine Vise fits Atlas, Benchmaster, Clausing
This is a 4 inch swivwl milling vise. Probably made in China. Is a pretty nice vise overall, works nceily good soze for a small mill. Missing the bolts that hold the swivel to the vise. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-145deae4e9f-0x111-
4″ KURT Double Station Milling Vise 2 "Last One", FREE SHIPPING
Kurt 4" Double Station Milling Vise Condition: Good(used) Missing Center Jaw support Bolts(2) should be standard SHCS This is Last one we have Does have a few nicks and surface rust but that is expected Vise handle not included. Compare@ 999.00 used to 1600.00 New Pictures are important part of Item description Please make sure to look at all pictures They are the vise you will get Shipping weight aprox. 50 Pounds We also have a 6" Double vise Contact if interested All auctions subject to prior sale Please check our other auctions so that you may save on shipping charges We usually ship out Paid items within 3"Business Days" after the day Payment is received. Saturdays. Sundays& Holidays are not counted Thanks for looking at our auctions a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146a69ec295-0x108-
KURT 4 in. Milling Vise w Rotary Swivel Base Machinist Drill Drilling Mill Tool
KURT 4 inch Milling Vise. With Rotary/Swivel Base, Handle, Bolts, and Extra(NEW) Pair of Step Jaws. D40(Vise) D40-4(Swivel Base) In excellent working condition with minor wear from normal use(please view all pictures very carefully before bidding) I purchased the vise(and its base) new but kept it in storage for a while and the rust protective coating stained parts of the it(please view pictures) The staining can probably be cleaned off with the right cleaning agent but I never attempted to do so. There is not rust(the mentioned staining are the only markings) Please be assured that the vise(and all hardware) function perfectly as they should. Please be aware that the vise was used in a shop environment and might have a scent as such. 14-day returns honored if the item is not as described(buyer is responsible for shipping) Shipping charge ... moreincludes insurance. Shipping is a bit expensive due to the item's weight(~45 lb) and size(it does not fit in a flat rate box) The shipping charge is an estimate from the USPS. If the actual shipping cost is less than that charged I will refund the difference. I can also ship via any carrier of your choice as long as you are willing to pay any extra charges/fees charged by the carrier. Local pick up is also an option. Please view my other listings for more machinist/machining tooling and precision measurement equipment(mostly Mitutoyo: height gauges. Calipers, micrometers, etc. Some Snap-on tools also. I will be listing most of my tools for auction within the next few days. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-146a7af97e7-0x112-
ATLAS S7-92 ORIGINAL METAL SHAPER MILLING VISE & ORIGINAL T NUTS
This is a barn find. It's not perfect please refer to pictures as part of description. End plate and screw has been repaired, machined sliding surfaces are in fair to great shape. Overall vice works as it should, very usable as it is
EMCO UNIMAT SL DB LATHE MILLING DRILLING MACHINE VICE VISE
GENUINE UNIMAT SL MACHINE VICE. JAWS 15mm X 35mm. MAX OPENING 37mm. MOUNT HOLES 40mm BETWEEN CENTRES. USES THE UNIMAT 5mm HEX KEY TO OPERATE THIS IS NOT ONE OF THE CHEAP NASTY ASIAN MADE VICES THAT ARE SOLD ELSEWHERE ON EBAY THIS HAS THE WORKPIECE STABILISING VEE GROOVES IN THE JAWS SOME SMALL MARKS FROM USE FREE UK SIGNED FOR/COURIER DELIVERY I HAVE MORE OF THESE MILL DRILL ITEMS AVAILIBLE ALONG WITH MOST STANDARD LATHE PARTS. EMAIL IF YOU NEED AMYTHING! WORLDWIDE SHIPPING £14 I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. AND AM BREAKING FOR PARTS SOME UNIMAT LATHES SEE MY OTHER ITEMS! I ADVERTISE ITEMS(LOTS MORE ITEMS THAN ON EBAY) ON MY OTHER SITE(CHEAPER AS NO FEES TO PAY! SO IT MAY BE REMOVED AND I RESERVE THE RIGHT TO DO SO! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL ... moreFREE TO EMAIL WITH ANY QUESTIONS.
WILLIAMS No. 6 LATHE HANDLE/VISE HANDLE/MILLING MACHINES/MACHINIST CRANK TOOL
SOLID STEEL WILLIAMS No. 6 VISE HANDLE LATHE HANDLE/ DRILL PRESS HANDLE MILLING MACHINE CRANK HANDLE/ MACHINIST CRANK TOOL HANDLE Used and in very good condition. Steel Williams No. 6 Lathe Handle/ Vise/Vice Handle/ Machinist Crank Handle/ Drill Press Handle. This machinist handle is about 6" long. And is for lathes, drill presses, milling machines, and other big machine shop tools it fits or can be made to fit. Square 5/8" x 5/8" mounting hole. The 7/8" dia. round part of this hole is about 1/2" deep. Note that we have put a thick piece of rubberized heat shrink tubing on the handle so your hand is thermally, electrically and abrasively isolated from the tool- stronger grip, less slippage, much less wear and tear on your hands, and much more comfortable to use than bare metal. Sale is for one machinist handle/crank. ... moreLIMITED QUANTITY. We have only one of these left to sell. Consumertronics.net welcomes you! Thank you very much for considering our Off-The-Shelf Items. We have 1.000s of handtools, power tools/ electrical tools/ electronic tools, test equipment/ meters/ gauges/ testers, other mechanical devices, and specialized materials- all in stock here at our techzonics.com Online Super Store(ABQ Techzonics, Albuquerque, NM) Some of these devices and special materials originated from Lone Star Consulting, Inc. of El Paso, TX(lonestarconsultinginc.com) legendary researchers into mind control, electronic attack and electronic harassment. Please visit our many other eBay offers. Should we not now have listed on eBay the tool, device or material you need, please email us, and if we have it to sell, we will try to list it on eBay. Should this Item be what you seek but you need it in a different quantity, please email us, and we will try to list it on eBay in the quantity you need. We are technical professionals to serve YOUR High-Tech Survival& Security needs. backed by 25+ Years of Top Professional Experience! PAYMENT. SHIPPING, GUARANTEES& OTHER POLICIES: PAYMENT: We accept payment
Milling Machine Machinist Vise 3/4" Hex Handle Kurt Etc.
Milling Machine Machinist Vise 3/4" Hex Handle Kurt Etc. 2 handles what you see is what you get
Bridgeport Vise 6” Jaws Milling Mill Machinist Tool
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Bridgeport Vise 6” Jaws Milling Mill Machinist Tool DESCRIPTION: ~ Up for bid is a good working Bridgeport vise 6” jaws mill tool. gsrx_vers_566(GS 6.7.1(566)
Stanley Milling Machine Precision Machinist 2 1/4" Wide Jaw Drill Press Vise 605
You are looking at a vintage Stanley machinist vise. This is a top quality tool and as you can see the jaws are fairly precise and still in very good condition. As you can see in the pictures it has some imperfections scratches. Nicks etc& some cleaning/paint touch-up or you could just use it as is. I am selling it cheap because it may not look perfect, however it is still as precise as the top quality instrument that it is. If you have any questions please ask before bidding. I will ship to continental US only(will also send to Alaska and Hawaii if using USPS) If you are interested in and are the winning bidder on other items I have for auction. And they are going together to the same address, I will gladly combine shipping to save you money. Thank you for looking and good luck/skill bidding.
ENCO 6” MILLING VISE 425/7566
ENCO 6” MILLING VISE 425/7566- USED ENCO 6” MILLING VISE 425/7566 INVENTORY# 6273 MODEL: 425/7566 SPECIFICATIONS: JAW WIDTH: 6” JAW HEIGHT: 2 1/4" JAW OPENING: 6 1/4” MECHANICAL SPECIFICATIONS: OVERALL SIZE: 25" L x 7 1/2" W x 5" H WEIGHT: 72 LBS GOOD WORKING CONDITION- SOLD AS PICTURED FOB OUR BALTIMORE. MD WAREHOUSE SHOP MORE VISES HERE NOTICE: When equipment is being sold"Used" we do our best to describe and show in photos the condition and appearance of those inventory items. If you are unsure of an item's compatability with your equipment. Or the overall working condition, please contact us prior to purchase. We welcome inspections on appointment and walk-in customers during business hours in our own Baltimore, MD warehouse. CONTACT US: Norman Machine Tool Group 1311 South Ponca St- Baltimore. Maryland ... more21224 Phone 800-394-4399- Fax 410-633-7737. Open: Monday-Friday/ 9 a.m. 5 p.m. Closed most Holidays- Call if not sure) Powered by SixBit's eCommerce Solution
SUPERMAX VERTICAL MILLING MACHINE 3HP VARI-SPEED DRO BRIDGEPORT VISE, TOOLING
SUPERMAX VERTICAL MILLING MACHINE 3HP VARI-SPEED DRO BRIDGEPORT VISE. TOOLING, 1992 SUPERMAX VERTICAL MILLING MACHINE. 3HP 220/440 SET TO 220 3 PHASE. VARI-SPEED R-8 HEAD, QUILL TRAVEL WORKS AS IT SHOULD, TABLE BACK-LASH X=.015, Y=.010. TELEDYNE PATHFINDER 2 AXIS DRO. ONE SHOT LUBE, 6" BRIDGEPORT MILLING VISE. MISC R-8 COLLETS, END MILLS ETC. $300.00 CHARGE FOR ENCLOSED SHIPPING CRATE + ACTUAL FREIGHT CHARGES. QUESTIONS OR FREIGHT QUOTES CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE ... morescheduling. Supersized images and templates. Get Vendio Sales Manager.
Vintage Palmgren Drill Press Vise,Clamp,1-1/2" wide jaws,Machinist,Milling Tool
Vintage Palmgren Drill Press Vise.Clamp,1-1/2" wide jaws,Machinist,Milling Tool. Very good, used condition. Some use wear. Working fine. Looks great! A quality tool! 4-1/8" long body. The international shipping price given by Ebay is usually wrong, more expensive! PAYPAL PREFERRED! Will combine shipping to save you $$$$. All items listed are used& as is, as found, unless otherwise stated. Nothing is perfect. Priority is FAST, Parcel Post is SLOW! DELIVERY CONFIRMATION& handling is included in shipping cost. ANY HOLDUP in INTERNATIONAL delivery is usually due to CUSTOMS BOG DOWN or SLOW POST OFFICE! International items may not get there for 3 MONTHS, others quicker. PLEASE DO NOT ASK ME TO LIE TO YOUR GOVERNMENT ABOUT PRICE,YOU CAN DO THAT! Payment Information: Within U.S.A. Buyer to pay Ebay Bid Price + USPS Priority Mail ... moreor Parcel Post. Delivery Confirmation& $2.00 for handling& fee charges. International Purchases-INTERNATIONAL SHIPPING IS NOT CHEAP ANYMORE! Buyer to pay Ebay Bid Price + First Class Mail International or Priority. Mail® International& $4.00 for handling& fee charges
Yost 1D Drill Press Machine Vise Milling Machinist Bench Atlas Clausing Buffalo
Yost 1D Drill Press Machine Vise Milling Machinist Bench Atlas Clausing Buffalo Has wear as shown fully functional Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING ... moreAND HANDLING- Use shipping calculator for costs
KURT 60-24/60-23 CNC MILLING MACHINE VISE HANDLE
KURT 60-24/60-23 CNC MILLING MACHINE VISE HANDLE This is from my Old Kurt Milling Machine Vise.The Kurt Brand is not marked on it,only tht 60-24 and 60-23. Check the pictures.
KURT ANGLOCK 6" x 1-3/4" MILLING MILL MACHINE VISE FOR BRIDGEPORT - #D60
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Kurt Milling Vise in Good Working Condition. Item Features& Specifications: Jaw Dimensions: 6" Wide x 1-3/4" Tall Center to Center of Mounting Holes: 7-1/2" Maximum Capacity: 5-1/2" Base Dimensions: 8-1/4" x 16-3/4" Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
Swivel Base for Vise Milling Table or Lathe Compound
Normal 0 false false false MicrosoftInternetExplorer4 Swivel Base for Vise or Lathe Compound.
Craftsman/Atlas Lathe Milling Attachment #10-501 and 10-502 vise
The Milling attachment and vise are in nice shape and fits the Craftsman/Atlas 12" 6 inches from centers to ways) lathes I used it on. I have shifted from the Atlas/Craftsman lathes and am selling off the last of the Atlas Craftsman accessories I have and I believe that this will fit 9" 10" or 12" lathes, but please do your own research before bidding! I used it on a 12" so I know for sure it fits those. It is in Reno, NV and the buyer pays for shipping from there to wherever they may be and using their choice of modes/company of transport unless shipping via USPS flat rate priority mail is OK.buyer still pays the shipping fee. I will accept PayPal as payment as long as the buyer covers the Paypal fees. Otherwise, I will accept about any form of payment, but will delay shipping until whatever form of payment that ... morethe winning bidder/buyer chooses has cleared my bank and I have cash in hand. If you happen to live in the area of Reno, NV and want to have a look at the vise, drop me a note and we can make arrangements for you to see it.
Vintage Palmgren No. 000 Adjustable Angle Vise Milling Drill Press Machinist
Palmgren No.000 Vise The vise is in used condition and shows wear with scratches. Rub wear, scuff marks, tool marks, there is two spots with the original owner's name scratched into it(check 3rd and 5th pictures above) paint wear and loss, oxidation, surface rust, other metal wear, residue spots, staining, discoloration, nicks, dings, small chips to the metal, and possibly other general wear. Be sure to check all of the pictures closely, including the additional pictures below this description for the best idea of the cosmetic condition of the item. If you have any questions or would like to request more pictures do not hesitate to ask. The vise is in working order and the jaws open and close easily and when the bolts are loosened the angle adjustment is easily moved up and down. It is marked PALMGREN, No. 000 along with some other markings ... morethat I cannot make out very well on one side of the vise. The vise weighs 9 pounds and 1.6 ounces on my scale. click to enlarge. INTERNATIONAL BIDDERS PLEASE READ: I will only ship internationally with USPS priority express mail if an item or combination of items sell for more than $30.00. If any item sells for more than $30 wait until I send an invoice. If you pay before the invoice is sent. Then the priority express option must be used, otherwise I will refund the amount sent and send a corrected invoice or send an additional invoice for the difference paid. I will combine shipping for multiple items ending within 3 days of each other when possible. The price given by the shipping calculator is an estimate that will need to be paid before I ship the item. After the item is shipped. If the price of shipping is less than the postage paid I will refund any overage. There is a 50 cent handling charge for domestic packages and $1.00 handling charge for international packages that is non-refundable. Pick up is also available at no charge for shipping. Most of my items I get at garage sales or thrift stores, so I cannot guarantee that the items are from a pet or smoke free envi
MF. CO. No. 217 MACHINIST VISE DRILL PRESS MILLING METAL WORKING TOOL USA MADE
HERE UP FOR AUCTION IS A VERY NICE EARLY MACHINIST VISE IN GREAT WORKING CONDITION. THIS VISE IS JUST THE WAY IT WAS INSIDE A SMALL WORK SHOP WE ARE CLEANING OUT. ON THE HANDLE IT IS MARKED: MF. CO. No. 217 MADE IN USA. NO BREAKS OR CRACKS JUST SOME MINOR WEAR FROM BEING USED. THE JAW IS ABOUT 2 1/2' WIDE AND OPENS TO 3' THE BASE IS 6' x 2 1/2' IN SIZE. ANY QUESTIONS PLEASE EMAIL AND AS ALWAYS WITH MY AUCTIONS IF THE HIGHBIDDER IS UNHAPPY IN ANWAY JUST SEND BACK FOR A REFUND. THANKS.
Yankee No.994 North Bros. Vise Machinist 4" Drill Press Milling Machine Bench
Yankee vise no. 994 being sold as pictured/ as is. Functional but not so pretty vise. The dark grey seen on the vise is repairs done with metal putty by its previous owner. Seem to be a decent job as they are holding up and it works fine. This was a well used vise and has been modified to hold thinner materials at the top in a milled channel. Jaws do not close all the way as one jaw side(the screw in plate) is not there. Threads look fine on screw. This yankee is larger than the one you normally see. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146bfcbc05f-0x119-
MILLING MACHINE VISE HANDLE FITS KURT D60 D675 STYLE (E,30-10)
MILLING MACHINE VISE HANDLE FITS KURT D60 D675 STYLE Click Images to Enlarge ​MILLING MACHINE VISE HANDLE FITS KURT D60 D675 STYLE LENGTH: 10-1/2" WEIGHT: 3 LBS COMES AS SHOWN IN PHOTOS NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 4 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply ... morefor items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment
2 Machinist 2" and 1.5" Vise - Drill Press Milling Machine Tool Lathe
These are 2 vises that came from my Grandfathers estate. They are 1.5 and 2 inches when opened. He was a machinist. I don't know who the maker is.couldn't find it anywhere on the vise. They seem to travel the way they are supposed to. The pictures represent the condition pretty well. Feel free to ask questions prior to bidding. Thanks!
KURT 6 VISE D675 ANGLOCK D-SERIES WITH SPEED HANDLE CNC MILLING
Lodestar Express Since Year 2000 Details KURT 6 VISE D675 ANGLOCK D-SERIES WITH SPEED HANDLE CNC MILLING Condition Was purchased new and used for home projects. Very little hours on it. Working great with no problems Shipping Buyer Pays Shipping/Handling/Insurance:$65(in the continental US only) con217 Please ask any questions before bidding Will accept returns for items that have been misdescribed. Must be returned with in 10 days. Any items damaged in shipping must go through the carriers insurance claim process International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. NOTE: ebay now charges a percentage ... moreon shipping charges. The shipping charges quoted reflects that.
Machinist's 6" Vise Toolmaker Clamp Adjustable Workholding Milling Tool
For your consideration is a vintage machinist's flat vise. This tool has a 6" wide vise. Adjustable with textured interior surface. Has a big steel handle with gauge that measures from 0-40. Contains original steel label marked Manufactured by Superior Detroit Company, Detroit Michigan 48216. Tool measures 6" x 12.5" In very good condition. Heavy and solid. Smooth functioning. Please view photos for cosmetic detail. Thank you for looking.
Parallel's Machinist Tool Box Find Milling Machine Vise Set Up Tool Fixture
See pictures of actual item. Check out my other items for more great finds.
Palmgren Milling Precision Machinist 2 7/16" Wide Jaw Mill Drill Press Vise #10
You are looking at a Palmgren No 10 machinist vise. This is a top quality tool and as you can see the jaws are fairly precise and still in very good condition. As you can see in the pictures it has some imperfections scratches. Nicks etc& some cleaning/paint touch-up or you could just use it as is. I am selling it cheap because it may not look perfect, however it is still as precise as the top quality instrument that it is. The ruler in pictures is not included. If you have any questions please ask before bidding. I will ship to continental US only(will also send to Alaska and Hawaii if using USPS) If you are interested in and are the winning bidder on other items I have for auction. And they are going together to the same address, I will gladly combine shipping to save you money. Thank you for looking and good luck/skill bidding.
BROWN & SHARPE #21 PRECISION MILLING VISE 2.5 TOOL MAKER MACHINIST VISE
BROWN& SHARPE#21 PRECISION TOOL MAKER MILLING VISE 0-2-1/2" Capacity Handle is Included 4" Wide This listing is for 1 used item in overall OK condition aside from cosmetic wear. Dirtiness with some milling/drilling marks and light surface rust, as seen. Moves freely. Openings are 4" x 1" and open to about a 2-1/2" capacity. Has dual slide guides to distribute working loads more evenly. Long moving jaw block provides extra reinforcement. Removable crank handle is included. Measures 11-1/4" in total overall length x 6-3/16" wide. Made in the USA. These are the heavy duty vises made to last a lifetime. No warranties or guarantees expressed or implied. See my other auctions for some great deals.
Starrett 384 Parallels Machinist Vise Tool Milling Machine Set Up Fixture Set
One set and 3 singles. 3/8x3/4 1/4x1 3/16x1-1/8(set) 1/8x1-3/16 Pics of actual items! View my other items for more great tooling finds.
KURT ANG/LOCK 8" VISE CNC MILLING
KURT ANG/LOCK 8" VISE CNC MILLING, 8" KURT VISE SER#37765 WORKS FINE JAWS DRILLED AND MILLED AS SHOWN. SHIPS FREIGHT N/C TO SKID. CALL FOR FREIGHT QUOTES OR QUESTIONS 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Kurt 6" DL640 Double Milling Machine Vise, Mdl., Snap Jaws, Handles, Used
80/20 Inc Kurt 6" DL640 Double Machine Milling Vice with Parts. Used. Up for sale is this used 6" Kurt DL640 Double Milling vice. Vice is used but fully functional with some minor chips and scratching. You will receive all of the additional following items in this sale: 1 Set of custom 45 degree angle jaws for 1.5" extrusions. 2 Sets of steel jaws(one is mounted. One spare) 2pcs of center workstops(one mounted. One spare) 2pcs of D60-24A Handles 1 Set of SnapJaws HSJ-240 jaws. All jaws are used and may show"crash marks" Vice itself measures around 21" long x 6" wide x 4.5" tall. Please note that due to sales volume we cannot recalculate and refund S&H if you pay for items separately. Questions on how to buy? Please click BUYING Condition: Used Price Per: Piece(with addtional items) Item/Lot Weight: ... more115 pounds For detailed information on this item or other 80/20 Inc Extrusions and Accessories. Simply click on the catalog photo link below: SHIPPING& HANDLING WE DO COMBINE NEW TO EBAY? Click BUYING for detailed checkout/ buying assistance. PURCHASING MORE THAN ONE ITEM? Please wait until you have selected your last item to Request Total from Seller or make payment. When purchasing multiple items we suggest you use Request Total from Seller to insure the best S&H price however you are free to send payment if the indicated S&H price is agreeable. Items ship within 3 business days from Columbia City. IN 46725. Click for more important information about the shipping of your item. PAYMENT TERMS Payment via Paypal. Major credit cards accepted. For info on paying via credit card click Please note our hours are M-F 8AM- 5PM. Evening and weekend orders are processed in the morning of the next Business day. Check out our other items and be sure to add us to your favorites list! ABOUT 80/20 SURPLUS 80/20 Surplus offers overstock. Returned goods, and lightly damaged items that are surplus to the needs of 80/20 Inc, a leader in T-slot aluminum framing products. These items
Kurt 6" DL600c Double Milling Machine Vise, Mdl., Snap Jaws, Handle, Parts, Used
80/20 Inc Kurt 6" DL600c Double Machine Milling Vice. Used with Parts. Up for sale is this used 6" Kurt DL600c Double Milling vice. Vice is used but fully functional with some minor chips and scratching. You will receive all of the additional following items in this sale: 2 Sets of custom 45 degree angle jaws for 1.5" extrusions. 1 Set of SnapJaws 6MSJ-200(1" x 2" x 6" soft steel) jaws. 1pc of SnapJaws 6HSJ-240 jaw. 1pc of SnapJaws 6HSJ-100 jaw. 1pcs of Kurt D60-24A(05263) Handle. All jaws are used and may show"crash marks" Vice itself measures around 22" long x 6" wide x 4.75" tall. Please note that due to sales volume we cannot recalculate and refund S&H if you pay for items separately. Questions on how to buy? Please click BUYING Condition: Used Price Per: Piece(with addtional ... moreitems) Item/Lot Weight: 120 pounds For detailed information on this item or other 80/20 Inc Extrusions and Accessories. Simply click on the catalog photo link below: SHIPPING& HANDLING WE DO COMBINE NEW TO EBAY? Click BUYING for detailed checkout/ buying assistance. PURCHASING MORE THAN ONE ITEM? Please wait until you have selected your last item to Request Total from Seller or make payment. When purchasing multiple items we suggest you use Request Total from Seller to insure the best S&H price however you are free to send payment if the indicated S&H price is agreeable. Items ship within 3 business days from Columbia City. IN 46725. Click for more important information about the shipping of your item. PAYMENT TERMS Payment via Paypal. Major credit cards accepted. For info on paying via credit card click Please note our hours are M-F 8AM- 5PM. Evening and weekend orders are processed in the morning of the next Business day. Check out our other items and be sure to add us to your favorites list! ABOUT 80/20 SURPLUS 80/20 Surplus offers overstock. Returned goods, and lightly damaged items that are surplus to the needs of 80/20 Inc, a leader in T-slot aluminum framing pr
KURT ANGLOCK 6"MILLING MACHINE VISE D60 INV=14577
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a KURT ANGLOCK 6" MILLING MACHINE VISE D60 Max. 5-3/4" Plate on top: 6 x 5-1/2" 2 Holes in base secure mounting(1/2" 1-3/4" depth. Handle 8" Please look at the markings on the bottom D6-1 MT6A BIW. I looked them up and people said that these are early Kurt D60 vises. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There ... moreis no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
KURT D50 MILLING 5" VISE FOR Bridgeport Clausing LATHE #2
KURT D50 MILLING 5" VISE FOR Bridgeport Clausing LATHE#2 KURT D50 MILLING 5" VISE. NO HANDLE. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT ... moreCUSTOMER SERVICE@ 718-370-3275.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146c9f88938-0x110-
Interstate 425-7265 Precision Milling Machine Vise 6" Jaw Width 7-1/2" Opening*
Interstate 425-7265 Precision Milling Machine Vise 6" Jaw Width 7-1/2" Opening* Left Side: Right Side, Paint Chipping And Residue Indicates Use Manufacturer: Interstate Model: 425-7265 Description: Precision Milling Machine Vise 6" Jaw Width: 7.5" Jaw Opening 1.5" Jaw Depth Packaging Condition Details: No Packaging Jaw Width: 6" Jaw Opening: 7-1/2" Jaw Depth: 1-1/2" Color: Blue No Additional Info Found*This item is not eligible for combined shipping. Includes: Vise And Black Cover Plate Item Condition: Used Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make ... morea direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in t
ATLAS ORIGINAL METAL SHAPER & MILLING MACHINE VISE FAIRMOUNT N0. 2 SPEC HANDLE
ATLAS ORIGINAL METAL SHAPER& MILLING MACHINE VISE NO. 2 SPECIAL FAIRMOUNT 2 SPEC HANDLE WITH 3/8" SQUARE HOLE AS PICTURED. THIS IS NOT A REPRODUCTION CRANK HANDLE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
KURT STEPPED VISE JAWS 6 x 1-7/8 x 3/4 in HARDENED & GROUND milling *4
info/sizes: some milling marks. See photos for details I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to ... moresee other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146cee20f55-0x10e-
KURT VISE STEPPED JAWS 6-1/4 X 3 X 15/16 inches HARDENED & GROUND milling *A5
info/sizes: The pair weight in at over 9 pounds. Excellent condition, see my other auctions for other Kurt vise jaws in different sizes I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy ... moreto send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!