|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$15.00 Shipping Condition: New Location: Chino, United States Description This punch former is made of high-quality Sks3 and is very strong and durable. It will help you to operate precisely and be your right-hand ... moreassistant for machining slots for milling cutters, cutting teeth for gears, curved milling slots, or drilling a bolt-hole circle around the circumference of a part. Key Features Vertical and Horizontal Design: It has both vertical and horizontal functions. When the vertical position of the table is used with the tail section, it is possible to perform circumferential cutting, indexing drilling, milling and more complex work. Durable Casting Material: High hardness Sks3 has good casting characteristics, such as milling vise, vibration reduction performance and high heat resistance, so it is very durable. High Precision: The pun.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It will help you to operate precisely and be your right-hand assistant for machining slots for milling cutters, cutting teeth for gears, curved milling ... moreslots, or drilling a bolt-hole circle around the circumference of a part.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification Model: Sbg-40 Material: Steel Color: Blue+Black Flat Steel Capacity: 30* 8 Mm/1.18*0.315inch Round Steel Capacity: 15.8 Mm/0.62inch Square ... moreSteel Capacity: 15 Mm/0.59inch Lever Handle Length: 30.5 Cm/12inch Pre-drilled Hole Diameter: 1cm/ 3/8inch Rubber Plastic Comfort Grip Length: 10cm/3.94inch Applicable Material: Bars up to 5/16 Inch (8 Mm) in Diameter and Flat Metal up to 1-1/8 Inch (30 Mm) Gross Weight: 24 Kg/52.9lbs Package Size: 50*32*23cm/19.7*12.6*9.06inch Package Included 1*Bending Bender 2*Molds 3*Pins.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification Model: Sbg-40 Material: Steel Color: Blue+Black Flat Steel Capacity: 30* 8 Mm/1.18*0.315inch Round Steel Capacity: 15.8 Mm/0.62inch Square ... moreSteel Capacity: 15 Mm/0.59inch Lever Handle Length: 30.5 Cm/12inch Pre-drilled Hole Diameter: 1cm/ 3/8inch Rubber Plastic Comfort Grip Length: 10cm/3.94inch Applicable Material: Bars up to 5/16 Inch (8 Mm) in Diameter and Flat Metal up to 1-1/8 Inch (30 Mm) Gross Weight: 24 Kg/52.9lbs Package Size: 50*32*23cm/19.7*12.6*9.06inch Package Included 1*Bending Bender 2*Molds 3*Pins.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States Don’t be afraid of the bad paint on this, everything actually moves smoothly on it. All the bolts thread in and out pretty nicely. I don’t know much of ... moreanything about steady rests so hopefully the photos tell the story. If not feel free to ask question and I’ll see if I can measure something for you.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. It may not have the original color cover as it is a ... moreDigitally Enhanced Quality Bound Copy. This Manual Covers Models.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States USED, TOOL HOLDER. NO CRACKS OR REPAIRS. NO WARRANTIES GIVEN OR IMPLIED.
Buy It Now
$14.38 Shipping Condition: Used Location: Temecula, United States Vintage 7" 1.25" x 12 TPI Metal Lathe Headstock and 4 Jaw 5" Whiton Chuck and Draw Bar. Everything is in good condition. I can't find a maker for the ... moreheadstock. 3.5" from bed to middle of spindle. Headstock turns smoothly. Chuck is untested but appears in good condition. The last two pics show what the bed looked like, but is for reference only.
Buy It Now
Free Shipping Condition: New Location: Chino, United States English Wheel Shaping Benchtop. No electric, pneumatic, or hydraulic power is used. This kit will leave you fully equipped, including all the essentials ... moreto get started right. Can be mounted on bench, clamped in vise or use with optional welded stand.
Buy It Now
Free Shipping Condition: New Location: East Brunswick, United States English Wheel Shaping Benchtop. Capacity: 16 Gauge Mild Steel, Aluminum, Copper. - The design is simple, with few moving parts. The base takes the form ... moreof a large "C," and is usually made of fabricated steel.
Buy It Now
Free Shipping Condition: New Location: East Brunswick, United States English Wheel Shaping Benchtop. - Can be mounted on bench, clamped in vise or use with optional welded stand. Capacity: 16 Gauge Mild Steel, Aluminum, ... moreCopper. - Machine provides outstanding performance on small jobs like motorcycle tanks, tank covers, seat cowls and aircraft fillets.
Buy It Now
$5.47 Shipping Condition: Brand New Location: China Material:HSS High Speed Steel. Length : 200mm.
Buy It Now
Condition: Used Location: Pawtucket, United States Gold International Machinery Corporation | STAMPING PRESS TOOL& DIE SET TO MAKE FINDING- Jewelry Pendant Our Inventory Number: 1954-390 THE DIE SET ... moreWAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: PITCH: 350" DIE SET SIZE: 9" X 8" WEIGHT: 30 LBS. This can be shipped via UPS Ground. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs are determined by the weight. Size, and destina
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States ❖ Anvil size: 1", 2", 3". ❖ Material: Iron. Your satis faction is our ultimate goal. ❖ Speed: 875-1350rpm. ❖ Gross weight: 22kg. ❖ Color:blue+black.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification Model: Sbg-40 Material: Steel Color: Blue+Black Flat Steel Capacity: 30* 8 Mm/1.18*0.315inch Round Steel Capacity: 15.8 Mm/0.62inch Square ... moreSteel Capacity: 15 Mm/0.59inch Lever Handle Length: 30.5 Cm/12inch Pre-drilled Hole Diameter: 1cm/ 3/8inch Rubber Plastic Comfort Grip Length: 10cm/3.94inch Applicable Material: Bars up to 5/16 Inch (8 Mm) in Diameter and Flat Metal up to 1-1/8 Inch (30 Mm) Gross Weight: 24 Kg/52.9lbs Package Size: 50*32*23cm/19.7*12.6*9.06inch Package Included 1*Bending Bender 2*Molds 3*Pins.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It will help you to operate precisely and be your right-hand assistant for machining slots for milling cutters, cutting teeth for gears, curved milling ... moreslots, or drilling a bolt-hole circle around the circumference of a part.
Buy It Now
Free Shipping Condition: New Location: China Contains needed tools for daily craft use, fit for professional or hobby use. It features a variety of shapes and sizes for different. It is made of premium ... morematerial, which is durable and lasting for use.
Buy It Now
Free Shipping Condition: Used Location: Anderson, United States Mark Shank. 35" x. 72".
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Gould& Eberhardt Tool Room and Industrial Shapers. Operating Instructions Manual Year(1957) This Manual Covers Models: General This Manual Includes: Setting up the Machine Lubrication: 14” 16” 16-20” 20-24” 24” 28” 32” 36” Oil Specifications Operation: Adjust Stroke Length Position Ram Set Tool Head Adjust Rapid Traverse Adjust Front Support Select Speed Select Feed Table of Dimensions Power Downfeed to Tool Head Adjustments: Ram Tool Head Mechanical Clutch Electric Clutch V-Belts Universal Shapers Your Serial# is Stamped on the Frame in the Front upper right-hand corner Directly below the ram guideway This Manual Has 8 Printed Pages. Year December 1957 All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover.Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. Normal 0 false false false EN-US JA X-NONE 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b3ac60b10-0x11c-
Buy It Now
Condition: Used Location: Pawtucket, United States Gold International Machinery Corporation | Stamping Press Tool and Die Set to Make Religious Cross- Jewelry. Pendant! Our Inventory Number: 0585-390 THE ... moreDIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: Religious Cross Die Set, Cross size: 1-1/4" x 5/8" Overall die set size: 9" x 8" Weight: 30 Lbs. approx) This can be shipped via UPS Ground. Price varies depending on your location. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please
Buy It Now
$469.60 Shipping Condition: New Location: China Model: WB12800. Output current: 60A. Maximum instantaneous output current: 200-6000A. Weight: 55kg. Size: 550 420 925mm.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States M2 Ground High Speed Steel Tool Bits Show Exceptional Results On Mild Steel, Alloys And Tools Steels. Weight: 1 oz.
Buy It Now
Free Shipping Condition: New Location: Cedarhurst, United States FEIN 72323112634 BLK 5.0 Corded Nibbler. Main Image Caption. Hand Tools. Planer & Jointer Knives. Boring & Drilling Bits. Shaper Cutters. Saw Blades. ... moreCNC Insert Tooling.
Buy It Now
Condition: Used Location: Pawtucket, United States We’re conveniently located on the East Coast between Boston and New York. Gold International Machinery Corporation. Die set size: 9" x 8". Square size.237" ... morex. 237".
Buy It Now
$21.40 Shipping Condition: Used Location: Elkin, United States South Bend 7” metal shaper bull gear. Also includes table feed eccentric, bearing, rocker arm shoe and stroke adjuster plate. Gear is in excellent condition. ... moreShould provide lots of use. Thanks for looking!!!!!
Buy It Now
Free Shipping Condition: New Location: Jama Masjid S.O, India · PARTING CUT OFF TOOL HOLDER SPARE PARTING HSS BLADE # Set of 2 Pcs. Parting or cut off blades are suitable for use on tougher materials and all heavy ... moreduty applications that require an increased depth of cut.
Buy It Now
Condition: Used Location: Pawtucket, United States Gold International Machinery Corporation | Stamping Press Tool And Die To Make Wool Mark- Jewelry Pendant Our Inventory Number: 1574-390 THE DIE SET WAS ... moreTAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: Overall die set size: 9" x 8" Weight: 30 Lbs. approx. This can be shipped via UPS Ground. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs are determined by the weight. Size, and destinat
Buy It Now
Condition: Used Location: Pawtucket, United States Gold International Machinery Corporation | Stamping Press Tool and Die Set to Make Religious Cross- Jewelry. Pendant! Our Inventory Number: 0585-390 THE ... moreDIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: Religious Cross Die Set, Cross size: 1-1/4" x 5/8" Overall die set size: 9" x 8" Weight: 30 Lbs. approx) This can be shipped via UPS Ground. Price varies depending on your location. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please
Buy It Now
Free Shipping Condition: New Location: Ontario, United States This is a Harris Oxygen-Acetylene Kit. It is still in the original unopened package. It also comes with the original box and instructions. It is a complete ... morekit for gas welding. Brazing and flame cutting. The box has the original shipping label on it, and it is dated 1982. If you have any questions please ask prior to bidding. I only ship within the U.S. Please pay within 3 days from auctions end, by Paypal only. I do not accept returns so please be sure of your bid before placing it. Thank you. Posted with
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States It will help you to operate precisely and be your right-hand assistant for machining slots for milling cutters, cutting teeth for gears, curved milling ... moreslots, or drilling a bolt-hole circle around the circumference of a part.
Buy It Now
$20.00 Shipping Condition: New Location: Chino, United States Description It may be difficult to find parts in the shape you need in the store, so your work is blocked time and time again. Then, you definitely need ... morethis bending bender. It discards the gearbox of the hand-crank bender and is much lighter in size. It is ideal for use during construction, allowing you to achieve twice the work with half the effort. Specification Model: SBG-40 Material: Steel Color: Blue+Black Flat Steel Capacity: 30* 8 mm/1.18*0.315inch Round Steel Capacity: 15.8 mm/0.62inch Square Steel Capacity: 15 mm/0.59inch Lever Handle Length: 30.5 cm/12inch Pre-drilled Hole Diameter: 1cm/ 3/8inch Rubber Plastic Comfort Grip Length: 10cm/3.94inch Applicable Material: Bars Up to 5/16 inch (8 mm) in Diameter and Flat Metal Up to 1-1/8 inch (30 mm) Gross Weight: 2.
Buy It Now
Free Shipping Condition: New Location: Jama Masjid S.O, India M2 ground high speed steel tool bits show exceptional results on mild steel, alloys and tools steels. This tool bit makes for a great finishing tool.
Buy It Now
$77.50 Shipping Condition: Used Location: Harwood, United States this is an old steady rest pictured on a Southbend 10 r lathe bed its center is a bit high for my lathe .The center is cl0se to 5 1/2 maybe a bit less. ... moreIt sits on the 4 1/2 bed perfectly the v fits nice so maybe its a southbend but any similar bed ways will work.
Buy It Now
Free Shipping Condition: New Location: Cedarhurst, United States FEIN 72323012635 BLK 3.5 Corded Nibbler. Main Image Caption. Hand Tools. Planer & Jointer Knives. Boring & Drilling Bits. Shaper Cutters. Saw Blades. ... moreCNC Insert Tooling.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States PARTING CUT OFF TOOL HOLDER SPARE PARTING HSS BLADE # Set of 2 Pcs. Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of ... moreproviding you tools of highest indian industrial standards.
Buy It Now
Free Shipping Condition: New Location: China 2pcs Bird Feeding Container birds food water bowl Garden Bird Feeder Feeder. 1PC Balance Science Decor Machines Art Balancing Sculpture. - Design: Low ... moreheight design. A perfect tool to install on jigs, tool fixtures, or movable base.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States This manual has All Models of the Fellows Gear Shaper CO. Accept 7125-type. Eleventh Edition Revised 1964 Printed 2000 (Original 1929 Revision). It may ... morenot have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Gould& Eberhardt Tool Room and Industrial Shapers. Operating Instructions Manual Year(1957) This Manual Covers Models: General This Manual Includes: Setting up the Machine Lubrication: 14” 16” 16-20” 20-24” 24” 28” 32” 36” Oil Specifications Operation: Adjust Stroke Length Position Ram Set Tool Head Adjust Rapid Traverse Adjust Front Support Select Speed Select Feed Table of Dimensions Power Downfeed to Tool Head Adjustments: Ram Tool Head Mechanical Clutch Electric Clutch V-Belts Universal Shapers Your Serial# is Stamped on the Frame in the Front upper right-hand corner Directly below the ram guideway This Manual Has 8 Printed Pages. Year December 1957 All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover.Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. Normal 0 false false false EN-US JA X-NONE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b3ac60ab8-0x112-
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description It May Be Difficult to Find Parts in the Shape You Need in the Store, so Your Work Is Blocked Time and Time Again. Then, You Definitely Need ... moreThis Bending Bender. It Discards the Gearbox of the Hand-crank Bender and Is Much Lighter in Size. It Is Ideal for Use During Construction, Allowing You to Achieve Twice the Work with Half the Effort. Key Features Bend Maker: This Bending Bender Creates Angled Bends to Form Clamps, Handles, Brackets, Hooks and Coils, so You Don't Need to Buy Them Yourself. High Quality: This Bending Bender Is Made of Hardened Steel and Pre-oiled for Maximum Strength and Corrosion-resistant Life. Easy to Install: It Is Predrilled with 3/8-Inch (1cm) Diameter Holes, so You Can Easily Mount It on Your Workbench or Clamp It in a Vise. Easy to.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications: ❖ Color:blue+black ❖ Material: Iron ❖ Gross weight: 22kg ❖ Anvil size: 1'', 2'', 3'' ❖ Speed: 875-1350rpm ❖ Anvil to hammer opening: 4'' ... more❖ Working pressure: 50 to 100 (maximum) PSI.
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States PT4969S1, PT4971S1, PT4967S1 . Made from 1/8" thick felt material and still fit in the original wiper retainer.These wipers take the place of both the ... moreoriginal felt. Soak with oil prior to installation to ensure a good soak.
Buy It Now
$5.99 Shipping Condition: Used Location: Temecula, United States Fair condition. 1" diameter 2" long 1/2" thread
Buy It Now
Free Shipping Condition: New Location: Cedarhurst, United States WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to causecancer. ... moreAvoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
Buy It Now
$551.00 Shipping Condition: New Location: China Model: WB12800. Output current: 60A. Maximum instantaneous output current: 200-6000A. Weight: 55kg. Size: 550 420 925mm.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States PARTING CUT OFF TOOL HOLDER SPARE PARTING HSS BLADE # Set of 5 Pcs. Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of ... moreproviding you tools of highest indian industrial standards.
Buy It Now
Condition: Used Location: Pawtucket, United States MdM Mario di Maio 6-Station Tube Forming Machine with TIG Welder S/N: MDM-MAA23. Argon Arc Welding Unit. Gold International Machinery Corporation. We’re ... moreconveniently located on the East Coast between Boston and New York.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Gould Eberhardt Parts List 16 Speed Tool Room Industrial Shapers Manual This Manual Covers Models: 16 Speed This Manual Includes: Instructions for Ordering Parts Attachments Illustrated on 4 Sheets Index. Tool Head, Slotted Top Ram and Lever, Cross Rail. Box Table and Slide Universal Table and Slide Vise. Electric Clutch and Brake, Transmission Mechanical Clutch and Brake Feed and Rapid Traverse. Feed Drive, Crank Gears, Crak Plate and Stroke Adjustment Lubrication Pump and Mechanical Type Filter Lubrication Pump and Replaceable Element type Filter Frame. Base and Motor Drive Front Hand Feed Attachments. Power Downfeed Attachments Much More! This Manual Has 23 Printed Pages. Year 1956 All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover.Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. Normal 0 false false false EN-US JA X-NONE
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States These wipers cross reference to the original Atlas part number S7-154 & S7-157. Wipers are sold in sets of 4 (2 for the ram and 2 for the cross slide) ... moreand are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a set for your Atlas Shaper.
Buy It Now
$13.10 Shipping Condition: Used Location: Ferris, United States Atlas Craftsman 9" 10" 12" Lathe & 7B 7 ” Metal Shaper Part L6-723 Hinge. Ship to US only
Buy It Now
Free Shipping Condition: New Location: Cedarhurst, United States FEIN 72324260120 BLK 1.3 CSE Corded Nibbler. Main Image Caption. Hand Tools. Planer & Jointer Knives. Boring & Drilling Bits. Shaper Cutters. Saw Blades. ... moreCNC Insert Tooling.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Power Source to Grinding Wheel. Grinding Wheel. Year January 1953. It may not have the original color cover as it is a Digitally Enhanced Quality Bound ... moreCopy. I’ve read Parts of these Programming and Operations Manuals.
Buy It Now
$18.50 Shipping Condition: Used Location: Farmington, United States I am not real sure what this would go to. The guy I got this from had Hardinge stuff but also Atlas horizonal mill stuff.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Norton 12” 14” and 16” Type C, Grinder Construction Operation and Servicing Manual This Manual Covers Models: 12” 14” 16” This Manual Includes: Instructions for Getting Machine Running Multipurpose Construction Pumps: Hydraulic Coolant Force Feed Lubrication Multipurpose Operation Grinding Principles and General Procedure Setting up Routine Important Points to Keep in Mind Wheel. Work and Traverse Speeds Vibration Information Norton Grinding Wheel Markings Specifications List of Illustrations: Composite Erecting Drawing Detail of Section through Headstock. Headstock and Face Plate Detail of Footstock and Wheel Truing Device Detail of Section through Wheel Slide Multipurpose Wheel Slide Showing Assembly& Relationship of Parts Rear View and Front View of 14 x 48” Section thru Hydraulic Picker Feed Section thru Table Speed and Control Valves Section thru Hand Table Drive Apron Controls on 16” Multipurpose with Heavy duty Headstock Face Grinding with Cup Wheel& In 3 Jaw Chuck Grinding Center Point in Headstock Grinding Railroa
Buy It Now
Free Shipping Condition: New Location: China It is one of the best choices for you.Are you looking for a professional, yet affordable threaded collet stop set?. Are you in search of a sturdy, trustworthy ... moretool that can do multiple jobs at once?. If yes, look no further!
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Fine Pitch. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve read Parts of these Programming and Operations ... moreManuals. There are So Many Possibilities. This Manual Covers Models.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics ... moreFor Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not Even Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false M
Buy It Now
Free Shipping Condition: Used Location: Peabody, United States
Buy It Now
$20.00 Shipping Condition: New Location: Chino, United States Description It may be difficult to find parts in the shape you need in the store, so your work is blocked time and time again. Then, you definitely need ... morethis bending bender. It discards the gearbox of the hand-crank bender and is much lighter in size. It is ideal for use during construction, allowing you to achieve twice the work with half the effort. Specification Model: SBG-40 Material: Steel Color: Blue+Black Flat Steel Capacity: 30* 8 mm/1.18*0.315inch Round Steel Capacity: 15.8 mm/0.62inch Square Steel Capacity: 15 mm/0.59inch Lever Handle Length: 30.5 cm/12inch Pre-drilled Hole Diameter: 1cm/ 3/8inch Rubber Plastic Comfort Grip Length: 10cm/3.94inch Applicable Material: Bars Up to 5/16 inch (8 mm) in Diameter and Flat Metal Up to 1-1/8 inch (30 mm) Gross Weight: 2.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package Included 1*Punch Former 1*Trimming Arm 1*Packing Box 1*English and Chinese Manual Specification Main Material: Sks3 Color: Silver Package Size: ... more33*23*20cm/13*9.05*7.9in Punch Former Size: 19.7*10.8*13.3cm/7.76*4.25*5.24in Trim Arm Size: 15.6*6.5cm/6.14*2.56in Net Weight: About 9kg/19.84lbs Height of Rotation Center:80mm/3.15in 24sub Division: Sub-degree 15° Clamping Diameter in V-solt: 3-30 Mm/0.12-1.2in Clamping up & down In-solt: 25mm/0.98in Max. Wheel Diameter: 200mm/7.9in Convexr Triming Range: 48mm/1.9in Concaner Triming Range: 100mm/3.9in Accuracy 0.01-0.008mm .
|
|
|
|
South Bend Metal Shaper Oil Pump Assembly
Removed from a South Bend 7" metal shaper. Good shape. Working when removed from machine. Comes as shown.
|
|
|
Vtg cream Girdle w/ metal Garters Shaper Slimmer FLEXEES sz M 28 super tight NWT
new with tags cream girdle shorts style super tight marked size M Thanks for stopping by and checking us out! Please pay within 2 days with a auction style listing, otherwise Ebay automatically puts into a case to be filed or please contact me `I strive to provide the best high quality items. I list any flaws I can find. I am only human. So I may have missed some things. If you are not sure about a fit or size. Please ask for any measurements you desire. Due to washing, different brands, and fabrics, things may fit differently than your normal clothing. ~Jessica's Top of the Line Bargins. Specializing in vintage. Retro, new, and used items!~ Get great deals on hard to find items and high end items! Don't be scared to make an offer. It never hurts to ask! I have my items set to private for your privacy: shipping: I ship USPS. All postage ... moreis calculated through Ebay's shipping calculator. I get my items shipped out by 5 days within paying. Unless there is a delay, like weather or needing more boxes! Ask about combine shipping too! I also ship international! Contact me for prices! please note international shipping can take up to a month or more! any cosmetics take longer due to customs*I DO NOT ACCEPT RETURNS* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1454d87f0a9-0x116-
|
|
|
c.1946 Smith & Mills Crank Shaper Metal Shaping Machine Tool Catalog Vintage OLD
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This is an original vintage c.1946 catalog published by the Smith& Mills Company of Cincinnati. Ohio. This catalog is magazine format of 24 pages measuring about 8.5” x 11” with a double foldout chart back cover. The front cover is titled: Smith& Mills CRANK SHAPERS- The Smith& Mills Company. Cincinnati, Ohio This catalog is illustrated throughout with numerous halftones and features information on S&M Heavy Duty Crank Shapers in sizes 16" 20" 25" 28" and 32" along with accessories and other information. This catalog isn’t dated but has price lists loosely inserted for 1944 and 1946 and looks to be from from around that time period. This catalog is fully complete. I applied a couple small pieces of ... moreacid free paper archival tape along the spine but secure the covers and the catalog shows some wear but is in good shape overall. Please see the"Tool Catalogs" section in my eBay store for similar items. Payment Terms Winning bidders will receive an email at the end of the auction explaining the option for paying with Paypal. If you have questions about how to pay for this item please let me know. If you made multiple purchases for a single shipment contact us for combined shipping charges which will normally be less than the amount shown on Paypal invoice. You will receive an email notifying you when your item ships. Buyers outside the USA. Please provide a telephone number for customs forms. Shipping Terms Please click on the Shipping& Payment tab above to access the eBay shipping calculator which will give you the options and costs for shipping your item depending on your zip code or country. Our shipping charges are based on actual postage cost plus less than one dollar to cover the cost of materials. Handling and delivery confirmation which is included on all domestic shipments. All items are professionally packed and well protected for shipment. All paper ite
|
|
|
Warhammer 40k Tau Empire Kroot Master Shaper Anghkor Prok Metal (w2179)
Warhammer 40k Tau Empire Kroot Master Shaper Anghkor Prok Metal(w2179) Painted To A Tabletop Standard. Sold as seen. To View the following images. Internet Explorer users can Left Click and Drag the image to the Tabs Bar to view the image. Firefox Users can Right Click and select View Image. Combined postage is available if you purchase more than one item from AA-Wargames. Please check the"Postage and Payments" tab for information on the Combined Shipping status of the item you are interested in. Please aim to pay within 7 days. For UK purchasers paying by cheque. I will wait for it to clear before despatching the items. Where'PPR Basecoated' appears in the item description it means that the model has been Previously Painted and Resprayed. Where'PSR Basecoated' appears in the description it means that the model has ... morebeen Paint Stripped and Resprayed. Please note- The first gallery image contains the whole item that is available in this auction. Any subsequent images are smaller parts of the auction lot. Or the auction lot from a different angle. Please refer back to the first gallery image for an image of the item or items available in this auction. Due to significantly increased prices by Royal Mail we have had to increase our postage prices. However Royal Mail have widened their weight banding so we have reduced our combined shipping rate down to 25p and also increased the number of items that can be combined. To include smaller vehicles. Unfortunately all larger vehicles/models will remain outside of the combined rates. We have also been able to decrease the despatch time as Royal Mail will now collect our outgoing mail more regularly. As of the 5th July 2013 customers from the Russian Federation will be required to pay an additional £6.00 postage for items to be sent via the Royal Mail signed for service. If you have purchased from the Russian Federation please request an invoice before paying. Due to large increases in the number of packages being claimed as lost. All packages o
|
|
|
VINTAGE DELTA ROCKWELL AMMCO 7" METAL SHAPER GREAD GUARD PAN
DESCRIPTION: USED. GREASE PAN GUARD FOR THE BACK END OF THE AMMCO/DELTA ROCKWELL 7" METAL SHAPER. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS ... moreIN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATL
|
|
|
VINTAGE DELTA ROCKWELL AMMCO 7" METAL SHAPER BELT GUARD WITH MOUNT BRACKET
DESCRIPTION: USED. BELT GUARD FOR THE DELTA ROCKWELL AMMCO 7" METAL SHAPER. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE ... moreTHE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER T
|
|
|
LEFT / RIGHT HANDED METAL SHAPER TOOL lathe plainer machinist Takes 1/2" Bit
Good Used Metal Shaper Tool Mfg Unknown Take 1/2" Bit Approx. 7 1/4" x 1 1/8" x 1 5/16" Wide at widest part No Bit included. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3/4" hole MACHINE CRANK lathe mill drill press metal shaper lever SPRING LOADED
good used machine crank approx 3/4" keyed hole x 4 3/4" long with spring loaded stop pin please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ammco Brake Lathe Co 7" Shaper USA Metal Working Mill
Ammco 7" shaper. Older unit but still a nice machine. I turned the drive pulley by hand& it cycled properly. It works properly. The wood base has split and could be replaced or just mounted somewhere else on another cabinet top. Local pick up only. Contact me before you purchase to make arrangements. Otherwise it needs to be paid for& picked up within 5 day's-very heavy bring another guy and a dolly probably. I showed a couple photos from an original catalogue listed on here in the last few pics-i also have the belt guards for it just not pictured
|
|
|
ATLAS S7-92 ORIGINAL METAL SHAPER MILLING VISE & ORIGINAL FAIRMOUNT HANDLE
ATLAS S7-92 ORIGINAL METAL SHAPER MILLING VISE& ORIGINAL FAIRMOUNT 2 SPEC HANDLE. GOOD SHAPE WITH A COUPLE SCRAPE MARKS IN IT. VISE HAS NO RUST JUST A HEAVY COAT OF AGED PATINA FROM SITTING IDLE AND WILL CLEAN UP REAL NICE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
Ammco Metal Shaper S15-32 Ram Guard
Good condition. Comes as shown.
|
|
|
Ammco Metal Shaper Original Work Light
Good working condition. Comes as shown. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-145a0244181-0x111-
|
|
|
Atlas Ammco South Bend Metal Shaper Vise
Covel brand. Nice used condition. Has 1/2" diameter threaded movable stud on the bottom for mounting vise to shaper table. Fits Atlas, Ammco, South Bend, and other bench top size shapers. Has 4" wide, 1" tall jaws, Jaws open 2.400" Comes as shown.
|
|
|
Ammco Metal Shaper Drive Shaft Assembly
Good working condition. Will require a taper pin to hold gear on shaft. Comes as shown.
|
|
|
Ammco Metal Shaper Feed Mechanism
Good working condition. Comes as shown.
|
|
|
Vtg 1954 How To Run A Lathe & Metal Working Shaper South Bend Lathe Works
Up for your consideration is a pair of South Bend Lathe Works instruction books. How To Run A Lathe- Volume 1. Edition 53, Copyright 1954, 128 pages. Bottom of book is slightly rippled. Owners name written on first page. How To Run A Metal Working Shaper- Edition 3. Copyright 1954, 24 pages. Owners name written on first page. See pictures above for more fine details. If you have any questions feel free to ask. Thank you!
|
|
|
ANTIQUE PAIR LARGE METAL SOCK DRYER STOCKING STRETCHER SHAPER LAUNDRY TOOL
OLD PRIMITIVE LARGE OPEN METAL SOCK DRYER STOCKING STRETCHER SHAPER LAUNDRY TOOL 24' As shown on photo Payment: PayPal ONLY! Please inquire for exact shipping cost before bidding Payment is expected within 5 days from auction end Don't bid if you don't intend to buy Please don't pay until invoice sent by us Please contact me with any questions and take a look at my other listings for more items. add 2.00 $ for S&H Cost of shipping higher in Canada than in USA and is determine by weight size and distance. BUYER PAY RETURN SHIPPING COST
|
|
|
ATLAS S7-92 ORIGINAL METAL SHAPER MILLING VISE & ORIGINAL T NUTS
This is a barn find. It's not perfect please refer to pictures as part of description. End plate and screw has been repaired, machined sliding surfaces are in fair to great shape. Overall vice works as it should, very usable as it is
|
|
|
Large Metal Shaper Head & Clapper
Unknown shaper head. Moving parts are kinda tight. They do move when tapped with a hammer. Screw works fine. Mounting holes are 5 1/2" center to center. Ruler in pic is 18" long. Hope someone out there can use it!
|
|
|
Logan metal shaper drive shaft and sprocket hub
Drive shaft for feed plate with the sprocket hub for ES8 Logan shaper. The woodruff key comes with it.not pictured) Thank you
|
|
|
Logan metal shaper shaper 8 inch clapper box and clapper
Nice used parts for Logan ES8 shaper. Very good condition. Thank you
|
|
|
8pc ATLAS CATALOG & ADVERTISEMENT LOT #RR181 Atlas 7" Metal Shaper Press Sander
This sale is for ONE LOT of EIGHT previously owned COPIES(one each) of: 1) Atlas Press Company. ATLAS ARBOR PRESS CATALOG No. A43. Kalamazoo 1943) 7 pages bound in a soft cover with four holes punched near the spine and an old dealer's stamp on the back. This offers images, descriptions and specifications for different presses and accessories. 2) Atlas Press Company. CANADIAN PRICE LIST FOR ATLAS ARBOR PRESSES" Kalamazoo 1943) 1 page with four holes punched near the spine. This is the price list for catalog A43 and was effective January 1, 1943. 3) Atlas Press Company. ATLAS SHAPERS CATALOG No. S43. Kalamazoo 1943) 7 pages bound in a soft cover with two holes near the spine. This catalog describes the construction, features and specifications as well as accessories for various shapers. 4) Atlas Press Company. CANADIAN PRICE LIST ... moreFOR ATLAS 7-INCH SHAPER& ACCESSORIES" Kalamazoo 1943) 1 page price list for catalog S43. 5) Atlas Press Company. ATLAS 7" SHAPER" MS58, Kalamazoo 19? 1 double sided page. It provides images, description and specifications for the machine and its accessories. 6) Atlas Press Company. ATLAS SHAPERS CATALOG No. S48. Kalamazoo 1948) 7 pages bound in a soft cover with five holes punched near the spine. It offers images, descriptions and specifications on various shapers available at the time. 7) Atlas Press Company. ATLAS BELT AND DISC SANDER" Kalamazoo 19? 4 pages with five holes punched near the spine and an old dealer's stamp on the back cover. The flyer provides images and descriptions on the machines features and accessories. 8) Atlas Press Company. ATLAS INSTRUCTIONS AND PARTS PRICE LIST FOR 10-450 TOOL POST GRINDER" 10L-450-2, Kalamazoo 1947) 1 double sided page giving the instructions for the controls, speeds, lubrication and ow to dress the wheels. There is also a parts list. PLEASE NOTE that the punched holes were for storage in a dfealer's binder. These items are in excellent overall condition and would make a nice gift for the collector
|
|
|
Metal Shaper or Planer Armstrong Tool Holder No. 40
Metal Shaper or Planer Armstrong Tool Holder No. 40
|
|
|
Logan 8 metal shaper tool slide
This is a logan shaper tool slide in very good condition. Only has tarnish. Not rusted. Everything looks really good. Upper housing is cracked on this machine. I have a lot of parts for it. Thank you 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146b0c0236f-0x111-
|
|
|
Gould & Eberhadrt 16" Metal Shaper
We are offering a Used Gould& Eberhardt 16" Metal Shaper. With vise and motor. Sold As-Is. Appears complete but 2- cast shifters need brazing. Vise top boo-boo's(See Photos) Have not run, no starter. Sold As-Is, Fixer upper. Weighs approx. 3600 lbs. Can load your truck no charge. Reasonable freight may be available into parts of Nevada and California. Please email your questions. Good Luck Bidding!
|
|
|
VERNON METAL SHAPER 12" WITH SWIVEL TABLE
VERNON METAL SHAPER 12" WITH SWIVEL TABLE This machine was bought out by SHELDON MACHINE Nice machine; not too large. With vise. Comes as shown. Ships at 1130 lbs Please contact us for shipping quote or pick up at our Western PA(Beaver Falls) Warehouse. Please Email With Any Questions Before You Bid Or Order. We Try To Describe Each Item As Accurately As Possible. And Want The Bidder To Be Confident That The Item Is What They Want. Our Feedback Record Proves That We Are Trusted. We Treat Folks Right. We Usually Ship Whichever W ay It Will Be Most Affordable To You. If You Have Any Referrence Of Shipping That Differs From Our Method. Please S tate It In Advance. We Will Be Happy To Ship It Your Way. But Y ou Must Let Us Know In Advance! If You Are Close To Beaver Falls. In Western Pa 40 Miles North Of Pittsburgh And Close To Ohio And ... moreWest Virginia) You Can Certainly Drop By And Pick Up Your Purchase During Our Store Hours. You Are Invited. Just Plan On Staying A While. It Is A* True Tool Experience* If You Have A Problem With The Transaction Or The Item Received Please Call Us Or Write Us Before You Go Negative With Feedback. We Will Work It Out. Unless Otherwise Stated All Gas Powered Tools And Machines Are Sold As-Is. If You Bid And Buy Something That Does Not Fit Your Needs. But Is Not Our Fault We Will Have To Charge A 10% Restocking Fee. Any Returned Item Must Be In The Same Condition As When You Received And In Salable Condition. If It Has Been Altered Or Marred Or Pulled Apart Return Privilege Is Voided. So Be Sure That The Item You Bid On Or Buy Is What You Need. Check Your Own Specs First. Saves Us All A Lot Of Hassle And Everyone Is Happy. And That'S How We Like It. Happy-Happy-Happy. We Never Charge Handling Charges. When We Ship Via Ups. We Use* Recycled Boxes& Packing* And Charge
|
|
|
CARBIDE TURNING TOOL holder lathe metal shaper planer J H WILLIAMS USA No T 2 R
Good Used Turning Tool J. H. Williams and Co Drop forged in USA Approx. 7 1/2" x 1 1/2" x 5/8" No T-2-R 3/8" Capacity No Carbide included. Powered by The free listing tool. List your items fast and easy and manage your active items. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146b9addbd2-0x107-
|
|
|
GW 40k Tau Metal Loose Mini Kroot Shaper #5 NM
Powered by Frooition Pro Shop Search. Click to close full size. Item Description. Games Workshop Warhammer 40.000- Tau- Loose Miniatures Metal Kroot Shaper#5(NM) Manufacturer: Games Workshop Product Line: Warhammer 40.000- Tau- Loose Miniatures Metal Type: Miniatures Loose Product Description: The picture shown is of the actual item or items you will receive. Please review the condition and any condition notes for the exact condition of this item. All pictures are stock photos. The condition of the item you will receive is NM. Our grading system is listed below for your perusal. Grading System. Please review the exact condition and any condition notes or incompleteness notes(next to the title and description above) for the exact condition of this item. All pictures are stock photos. Our grading system is as follows: SW Shrink Wrapped. Still ... morein the original factory shrink wrap. With condition visible through shrink noted. For example, SW(NM) means shrink wrapped in near-mint condition. MINT Perfect. Brand new. NM Near Mint. Like new with only the slightest wear. Many times indistinguishable from a Mint item. Close to perfect, very collectible. Board games in this condition may be played but show little to no wear. EX Excellent. Lightly used. But almost like new. May show very small spine creases or slight corner wear. Absolutely no tears and no marks, a collectible condition. VG Very Good. Used. May have medium sized creases. Scuff marks, very small stain, etc. Complete and very useable. FAIR Very well used. But complete and useable. May have flaws such as tears, pen marks or highlighting, large creases, stains, marks, a loose map, etc. POOR Extremely well used and has major flaws. Which may be too numerous to mention. Item is complete unless noted. Boxed items are listed as‘code/code’ where the first code represents the box. And the second code describes the contents. When only one condition is listed, then the box and contents are in the same condition. If a book is listed in the same fashion, the
|
|
|
Warhammer 40k Tau Empire Kroot Shaper Metal (w653)
Warhammer 40k Tau Empire Kroot Shaper Metal(w653) Part Painted. Sold as seen. To View the following images. Internet Explorer users can Left Click and Drag the image to the Tabs Bar to view the image. Firefox Users can Right Click and select View Image. Combined postage is available if you purchase more than one item from AA-Wargames. Please check the"Postage and Payments" tab for information on the Combined Shipping status of the item you are interested in. Please aim to pay within 7 days. For UK purchasers paying by cheque. I will wait for it to clear before despatching the items. Where'PPR Basecoated' appears in the item description it means that the model has been Previously Painted and Resprayed. Where'PSR Basecoated' appears in the description it means that the model has been Paint Stripped and Resprayed. Please ... morenote- The first gallery image contains the whole item that is available in this auction. Any subsequent images are smaller parts of the auction lot. Or the auction lot from a different angle. Please refer back to the first gallery image for an image of the item or items available in this auction. Due to significantly increased prices by Royal Mail we have had to increase our postage prices. However Royal Mail have widened their weight banding so we have reduced our combined shipping rate down to 25p and also increased the number of items that can be combined. To include smaller vehicles. Unfortunately all larger vehicles/models will remain outside of the combined rates. We have also been able to decrease the despatch time as Royal Mail will now collect our outgoing mail more regularly. As of the 5th July 2013 customers from the Russian Federation will be required to pay an additional £6.00 postage for items to be sent via the Royal Mail signed for service. If you have purchased from the Russian Federation please request an invoice before paying. Due to large increases in the number of packages being claimed as lost. All packages over £70 in value will be required
|
|
|
1 Vintage Metal and 1 Florsheim wooden shoe shaper Stretcher
One vintage pair of metal shoe shapers and One vintage pair of Florsheim wooden shoe shapers. Both pairs in nice working condition. Check out our other items for sale in our Ebay store. We will ship multiple items together when possible to save on shipping.
|
|
|
Armstrong 39 Metal Shaper Tool Holder
You will have a hard time finding an Armstrong 39 in better condition. It appears to have been little used. And has absolutely no rust. It does have a shallow(1/2 mm) nick on the head of the screw insert(see pictures 2 and 3) But that in no way affects function.
|
|
|
ATLAS ORIGINAL METAL SHAPER & MILLING MACHINE VISE FAIRMOUNT N0. 2 SPEC HANDLE
ATLAS ORIGINAL METAL SHAPER& MILLING MACHINE VISE NO. 2 SPECIAL FAIRMOUNT 2 SPEC HANDLE WITH 3/8" SQUARE HOLE AS PICTURED. THIS IS NOT A REPRODUCTION CRANK HANDLE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
NWT Vtg RAGO NEW YORK White Laced OPEN Crotch 4 METAL Garters GIRDLE SHAPER 44
NEW WITH TAGS VINTAGE WHITE LACED FRONT TUMMY PANEL OPEN CROTCH 4 METAL GARTERS INSIDE RUBBER LACED LEGS GIRDLE SHAPER TAG READS RAGO OF NEW YORK SIZE 44 MEA SUREME NTS ARE WAIST DOUBLED 30" UN STRETCHED LENGTH 19" PRIVATE LISTING IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME AND I WILL GET BACK TO YOU ASAP. MY FEEDBACK SCORES ARE VERY IMPORTANT TO ME IF YOU CANNOT RATE ME A 5 PLEASE EMAIL ME SO I CAN RESOLVE ANY CONCERNS. I TYPICALLY POST VINTAGE ITEMS DAILY SO PLEASE TAKE A LOOK AT MY OTHER ITEMS THANK YOU FOR LOOKING AND GOOD LUCK BIDDING PLEASE PAY WITHIN TWO DAYS OF AUCTION ENDING UNLESS YOU ARE BIDDING ON MORE THAN ONE ITEMS THEN PLEASE EMAIL ME THANK YOU All orders are shipped with the US Postal Service. INTERNATIONAL BUYERS NOTE: Import duties. Taxes, and charges are not included in the item price or shipping cost. ... moreThese charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. ALL PACKAGES WILL BE MARKED AS MERCHANDISE SHIPPING WILL TAKE LONGER DUE TO CUSTOMS AND DISTANCE a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146cf9dd15d-0x10b-
|
|
|
South Bend 7" Bench Top Metal Shaper Complete With Swivel Base Vise & Light
Up for sale here is a South Bend 7" Bench Top Metal Shaper Complete With Swivel Base Vise& Light. Used in good condition. Local delivery is available at a reduced rate and pick up is free. We can accommodate self-arranged shipping or contact us for a freight quote as the calculator is usually wrong. When requesting a quote please include the following information as it will impact the amount of the quote: 1. Zip code of where the item is to be delivered, 2. Is the address a commercial or residential address. And 3. Is there a dock or forklift available at said address? In our experience shipping to a freight terminal is more expensive than shipping to a commercial address with a forklift and/or loading dock. Feel free to ask any questions. SCT3781
|
|
|
Gould & Eberhardt Industrial Metal Shaper - Swivel Vise - G & E 16" -made in USA
Gould& Eberhardt Industrial Metal Shaper- Swivel Vise- G& E 16" made in USA Up for auction is a Gould Eberhardt Industrial Metal Shaper. It seems to be in very good usable condition. It has a 2 hp 3 ph motor. I ran this long enough to try it out. Everything seems to work fine, but I have no use for it. I have taken the side cover off and noticed that there was a repair to the slide arm, the repair looks like it was done many years ago(look at the last picture) It needs a little TLC and regular maintenance. The universal table and swivel vise appear to be in excellent condition. The horizontal feed seems to work fine. I do not know how to work the vertical feed. I am guessing it weighs approximately 3000 lbs. Local pickup is preferred. I can help load. Shipping is available, but you must make the arrangements and pay the shipper ... moredirectly. All items are sold as is. Look at the pictures for more details. Email with any questions before bidding. Payment is expected within 3 days after auction ends or contact me prior to bidding for other arrangements. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146d6c934fe-0x110-
|
|
|
Vintage Charmode Body Shaper Girdle Bra Wonder Span Metal Garters Split Gusset
Welcome To Our Blue Ridge Home And thank you for stopping by Description Vintage Charmode body shaper/ one piece girdle and bra. Split nylon gusset. Metal garters. Label reads“Non Rubber Wonder S-P-A-N elastic” Sized a 36A. Sears. Roebuck and Co. circa 1960s. Light wear, overall in very good plus condition. Cups as sized on tag are 36A– Waist 11 ½” Hips 13 ½” Measurements were taken with garment flat and unstretched. Please check measurements very carefully and ask any all necessary questions before bidding or buying. It is the responsibility of the buyer to know their size and measurements. TERMS After a brief hiatus. Our Blue RidgeHome is back again and looking forward to offering some wonderful items. I have many. Many things to list, so please check back often. BASIC INFORMATION: I am of the mindset that everyone should be able ... moreto own beautiful vintage lingerie. I may sell items with slight damage or faint stains. With full disclosure of such. I do this to be able to offer a beautiful piece of true vintage lingerie that may otherwise be unaffordable to many. I have found over the years that minor damage or stains really do not bother most people and that most are willing to do the minor repairs themselves, to save money. The lingerie is still the same quality made as the excellent pieces, just priced much less. For those who want excellent, I offer those as well, as do many sellers of lingerie. GOOD TO KNOW: I gently launder and air dry all used lingerie and clothing before listing. I do not spot clean. But any spots that did not come out with my gentle wash, will be stated in the listing. I do use fabric softener, so if this offends your senses, you may want to take this into consideration before buying or bidding. New old stock items that have retained their tags, are not laundered, and may have been stored for long periods of time, so may have a musty scent. If you are sensitive to odors or they offend you, please refrain from bidding on these items. MISCELLANEOUS: Please do not expect your vint
|
|
|
Tau Empire Kroot Shaper Metal Part Paint Warhammer 40K aa
Welcome to Monster Mouth Games This listing is for the item(s) seen in the picture and noted in the title above. I try to provide clear pictures of the items I have for sale. However sometimes certain aspects of a model are difficult to discern so please don't hesitate to contact me with any questions you may have. In addition sometimes I use key words to describe a model or models. Some of those words are defined below: Bare metal/plastic: Item has never been painted or undercoated. Damaged: Item is damage or has suffered broken components which may be missing. Any broken component will be in the picture if it is included. Glue Issues: Model has been assembled with excess glue. Which may need to be removed. Incomplete: Item is missing components or bits. Modded: Item has been modified from its original form. oop: Item is out of production/print. ... morePainted: Item has been painted to a simple tabletop standard. May have some light chipping. Painted Low Standard: Item has been painted to a beginners level. May have some light chipping. Part Paint: Item has been partially painted. Poor Paint: Item has been poorly painted or has been repainted over existing paint. May have chipping. Pro Paint: Model has a clean tabletop standard paint job or above. Could have a few paint chips but anything major will be noted. Stripped metal/plastic: Item has been stripped of paint and/or primer. Model may need further paint removal. Job Lot/Junk Lot: Indicates that the models are in various conditions and will need work due to a combination of factors such as being poorly painted. Incomplete, and/or damaged. Regarding Bases: Unfortunately. I receive a lot of models without bases therefore bases are only included if they are shown in the picture. Sorry about that. I do combine shipping. So please check out my store, for more of your miniature needs. I have a wide range of single figures. Units, and out of production and rare miniatures. NEW STUFF ADDED DAILY! Please wait for a new invoice if purchasing multiple items. S
|
|
|
South Bend metal shaper, 7 inch milling mill 7" stroke
South Bend metal shaper. 7 inch Great shape Can do things other machine tools can’t! Features: Nice stand. Cast iron legs and steel plate top Runs on 110V single-phase household current Kurt-type milling vise. 3” Clear lacquer finish No broken castings Later model with wide front base Original oil circulation system for lubing Scotch yoke and ram Can be shipped. Loading dock available Crating charge extra Can be picked up locally. Can assist with loading Check out this URL to see a video of this shaper in operation: https:www.youtube.com/watch?v=GWPp6c6fsU8 Shipping to US only g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146eb8f631f-0x108-
|
|
|
VTG WHITE hold up 4 strap METAL garter belt Crownette Shaper WIDE stretch sz 28
For your consideration. Is a lovely garter belt 22-32" waist Good condition
|
|
|
lot of 4 Vtg Hallmark cookie cutters + Gingerbread man metal shaper,
Lot of 4 Vintage HALLMARK Cookie Cutters plus a red enameled metal gingerbread man cookie shaper. Hallmark Cutters are: A Brown Turkey hard plastic with a loop for hanging. A Brown Pilgrim Chick. Soft plastic with a loop for hanging and is marked 1980. A brown Football soft plastic with a loop for hanging. Green Christmas tree with the embossed ornament and a loop for hanging also soft plastic. The Red enameled gingerbread man is a shaper and does not have a mark to tell who made it. Shipping costs quoted are for the U.S.A. ONLY. Buyer to pay shipping unless otherwise stated. I will combine purchases to save on shipping costs. Payment within 3 days of end of auction. International buyers contact me before bidding for shipping costs. International buyers are responsible for all customs and import fees. Payments made by Paypal only. Thanks ... morefor looking.
|
|
|
SWIVEL HEAD METAL SHAPER or PLANER TOOL HOLDER hss bit ARMSTRONG USA No. 42
used swivel head tool holder BODY ONLY- NO HEAD Armstrong USA No. 42 swivel head is missing shank is approx 1 1/8" x 1 11/16" x 13" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
OK TOOL CO BIT SHARPENING TOOL HOLDER metal shaper planer boring mill cutter
good used bit holder for hand sharpening of OK planer and shaper bits OK Tool Co 2421G please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SWIVEL HEAD METAL SHAPER or PLANER TOOL HOLDER hss bit WILLIAMS USA No. 401
good used swivel head tool holder Williams USA No. 401 swivel head 5/16" x 7/16" Mo-Max cobalt bit shank is approx 5/8" x 1 1/4" x 8 3/4" please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GOOSENECK LATHE or SHAPER TOOL HOLDER metal planer hss bit ARMSTRONG USA No S-53
good used gooseneck tool holder Armstrong USA No. S-53 3 position swivel head 3/8" x 3/8" Gorham HSS bit shank is approx 3/4" x 1 5/8" x 9" please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SWIVEL HEAD METAL SHAPER or PLANER TOOL HOLDER hss bit WILLIAMS USA No. 92
good used swivel head tool holder with wrench Williams USA No. 92 swivel head 5/16" x 3/8" Crucible Rex 49 bit shank is approx 5/8" x 1 1/4" x 8 1/2" please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Rare & Clean! South Bend 4" Swivel Metal Shaper Vise # DPV103 W/ 3-1/2" Cap.
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Vise in GREAT. Working Condition. Item Features& Specifications: Jaw Dimensions: 4" Wide x 1" Tall Maximum Capacity: 3-1/2" Mounting Center to Center: 7-1/2" Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1471dfd11b2-0x118-
|
|
|
Vintage Silver Tone EKCO Metal Adjustable Shoe Stretcher Shaper Tree Form
Vintage Silver Tone EKCO Metal Adjustable Shoe Stretcher Shaper Tree Forms. Good used condition. Very minor surface rust spots on the underneath. Easy to clean. Least expensive shipping used unless otherwise requested. Thanks for viewing.
|
|
|
Vintage Hollywood Vassarette Open Bottom Girdle 6 Metal Garters Shaper Large Sz
Beautiful Sexy Soft& Stretchy True vintage Hollywood Vassarette open bottom girdle made in the USA style 819 size 34 satin panels made with a blend of acetate and cotton. Sturdy metal zipper with eyelet hook reinforcements. 6 metal garter hooks. Please see all photos and consider them part of the description. We ship quickly and carefully. Please make payment within 24 hours of the auction closing. Thanks for looking.
|
|
|
NEW Vintage Rago Open Bottom Shaper Girdle w Metal Zipper OSS Fit S M Style 353
NEW Vintage Rago Open Bottom Shaper Girdle w Metal Zipper OSS Fit S M Style 353 ~~~ ~~~ ~~ Many Other Vintage Lingerie/ Intimates/ Shapers are Listed ~~ ~ I'm always Happy to Combine for Shipping ~ Vintage Rago Brand Open Bottom Shaper/ Girdle with 4 Garters Has Metal Zipper + Bone/ Stay at Front Floral Front Panel ^ Satin Back Panel- Photo 3 = Back New Old Stock Rago Brand- Style 353 Hips Aprox 34-1/2" Unstretched- Stretches Aprox 38" ^^^ Aprox 14" Long SIZE ON TAG: 32- This is Vintage Sizing& this Item may accomodate a Contemporary US Sz S or M-Depending Upon How you Like the Fit- Please know your Vintage Rago Sizing DATING: This is Definately Vintage- But I'm Unsure of Dating- My Bet Guess is 1950's 1960's Era Vintage ~ Any Info is Welcomed To Pre-Answer e-mails- Yes- Authentic- Guaranteed CONDITION: ... moreNew Condition- Recently Remove from Storage ~ Clean- No Dots or Spots or Stains but this is a Vintage Lingerie Item& it is expected that you will re-clean/ re-launder ~ No holes/rips/tears/fraying ~ Elastic is Still Nice& Stretchy ~ Please note that I am not sensative to cigarette scent- I do not believe that this item has a cigarette scent- Also May have sachet scent from Packing Paper- if this is an issue w/ you- please do not bid on this item PLEASE VIEW THE MANY OTHER LUXURY Lingerie/ Intimates AUCTIONS THAT I'M LISTING TODAY ~ I'M ALWAYS HAPPY TO COMBINE FOR SHIPPING ~ US BIDDERS ONLY: JUST ADD $2.00 TO THE HIGHEST S/H COST ITEM(s) that you Purchase withn 3 Days U.S. Bidders Only ~ ~ This Item ships Securely with $1.05 Cost Tracking& $3.85 covers the cost of S/H Anywhere in US- You may add Insurance at Actual Cost- I am not responsible for uninsured items As You Will Probably be Making Payment by PayPal- It is Expected that you will make Immediate Payment- Please- I am a Seller& Not a Bill Collector No International Bidders ~~~ ~~~ Please e-mail with questions. As here are no returns*THERE IS NO RESERVE ON THIS ITEM*
|
|
|
VINTAGE 1952 CINCINNATI SHAPER CO. CINCINNATI SHAPERS CATALOG METAL SHAPING
5 DAY AUCTION! VINTAGE CINCINNATI SHAPERS CATALOG CINCINNATI SHAPER CO. OH) COVERS PLAIN TABLE. UNIVERSAL, UTILITY, HIGH SPEED& SPECIAL SHAPERS SPECS. FEATURES, ACCESSORIES 36 PGS. 1952 YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H $6.00 PRIORITY MAIL. COMBINED SHIPPING AVAILABLE. PLEASE WAIT TO TO INVOICED FOR MULTIPLE PURCHASES. INTERNATIONAL BIDDING REQUIRES APPROVAL. PHOTOCOPIES ARE NOT AVAILABLE PAYMENT EXPECTED WITHIN 3 BUSINESS DAYS OF AUCTION CLOSE SECOND-CHANCE OFFERS AVAILABLE ON SOME ITEMS
|
|
|
TOOL POST for ENGINE LATHE or METAL SHAPER TPG 432 CARBIDE INSERT TOOL HOLDER
good used tool post- shop made Tee is approx 3/8" thick x 2 1/8" with TPG 432 insert tool holder please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LATHE or SHAPER TOOL HOLDER metal planer hss bit ARMSTRONG USA No S-50 In Box
Nice used Armstrong S-50 patented tool holder.
|
|
|
VTG CAMP WHITE BONED LACE UP METAL ZIPPER COTTON WAIST CINCHER GIRDLE SHAPER 44
VTG CAMP WHITE BONED LACE UP METAL ZIPPER COTTON WAIST CINCHER GIRDLE SHAPER 44 L XL Want to see more fabulous women's sleepwear? Go to my store and click on"Robes and Sleepwear" listed in the Store Categories on the left hand margin to see more! Manufacturer: Camp Size: Marked Size 44. Please see measurements that follow Measurements: to 38" adjustable waist. 14" long Fabric: cotton/ poly blend Condition: Excellent Condition(preowned. Described as ~ Excellent: An item shows typical signs of wear due to occasional use. THIS AUCTION is for a super sexy shaper. White cotton blend jacquard boned waist cincher has elastic top. Heavy duty off center front zipper, lace up sides with extra wide heavy duty adjustable straps, and loops for garters if you want to add them. CONDITION RATINGS NWT: An item is brand new with store ... moretags attached. NWOT: An item is as perfect and pristine as when it was originally made and shows no sign of wear. Excellent: An item shows typical signs of wear due to occasional use. Very Good: An item is considered wearable but may have surface flaws or typical wear to fabric. Any defects will be mentioned in description. Good: An item is wearable but cannot be returned to excellent condition even if repairs are made. for more great items! Paypal is my preferred method of payment. Thank you for checking out my listings! I really appreciate it! A NOTE ABOUT SHIPPING: I strive to keep your shipping costs low. Packages will be shipped either by Priority Mail with Delivery Confirmation. Which takes 2-3 days for delivery, or First Class Mail, with Delivery Confirmation, which takes on average 4- 7 days for delivery. I will email you the day your package is shipped to let you know your purchase is on its way to you! Delivery Confirmation/tracking Numbers will be available on your My eBay page. SHIPPING FOR US BUYERS: Please note that I charge only actual shipping charges on all First Class Shipping and Priority Mail shipping. All of my auctions are set to the USPS Calculator. And
|
|
|
Metal Shaper Swivel Vise Atlas South Bend Ammco
This is a swivel base shaper vise that is in great working condition. The auction includes the vise and the wrench for opening/closing. Will not ship internationally.
|
|
|
VTG White WIDE Shaper garter belt Hold Up metal Garters 3XL ADONNA 34-54"
For your consideration. Is a beautiful White metal garter belt. sz 34-54" sz 4XL.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14770f74602-0x11d-
|
|
|
LOGAN METAL SHAPER, SUPER CONDITION
UP FOR SALE IS A LOGAN 7" SHAPER IN PERFECT CONDITION. YOU WILL NOT FIND ANOTHER ONE IN THIS CONDITION. I HAVE HAD IT FOR 2 YEARS NOW AND I WAS TOLD BY THE PREVIOUS OWNER I WAS THE FIRST ONE TO EVER USE IT. WAS TOLD IT CAME FROM AN OLD MACHINE SHOP THAT NEVER PUT IT IN PRODUCTION. I CAN NOT CONFIRM THIS BUT I WILL SAY I HAVE SEEN A LOT OF SHAPERS AND THIS ONE IS THE NICEST I HAVE EVER SEEN. I BELIEVE EVERYTHING IS ORIGINAL DOWN TO THE PAINT. RUNS PERFECT. I BOUGHT IT BECAUSE I THOUGHT IT WAS NEAT TO WATCH WORK AND IT IS. IF YOU ARE LOOKING FOR A OLD SHAPER OR JUST LOVE THE OLD AMERICAN IRON THIS IS THE MACHINE FOR YOU. SELLING BECAUSE I NEED THE ROOM FOR OTHER MACHINES. YOU WILL PROBABLY NEVER GET ANOTHER CHANCE TO OWN A LOGAN SHAPER IN THIS CONDITION AT THIS PRICE. THIS AUCTION COULD END AT ANY TIME DUE TO LOCAL SALE. I ACCEPT PAYPAL ... moreONLY AND PAYMENT IS DUE WITHIN 2 DAYS OF AUCTION END. THIS IS FOR PICK UP ONLY. I WILL NOT ATTEMPT TO SHIP THIS MACHINE DUE TO THE SIZE. WEIGHT AND I DO NOT WANT TO BE RESPONSIBLE FOR DAMAGE DURING SHIPPING. I WILL HOLD THE MACHINE FOR YOU FOR A REASONABLE AMOUNT OF TIME BUT MUST BE PAID IN FULL WITHIN 2 DAYS OF AUCTION END. MY ZIP CODE IS 44254 AND MY PHONE NUMBER IS 330-416-2243. PLEASE ASK ANY QUESTIONS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1478050035c-0x112-
|
|
|
Christmas Metal Pancake Iron Mold Shaper Gingerbread Man Holiday
Approx 5.25" tall at tallest points x 4.75" wide at widest points Condition: Excellent. Used condition Rating System: Excellent: No signs of wear unless otherwise noted in condition box above. Good: Shows light signs of wear such as minor scratches. Lightly dog-eared edges and issues noted in condition box above Fair: Shows definite signs of wear such as pilling. Pulled threads, severely dog-eared edges, creases, scuff marks& heavy scratches Seller: All items are inspected thoroughly before they are listed. I am human and may occasionally miss something. If I do. Please notify me of any concerns before leaving neutral or negative feedback to offer me the opportunity to remedy the issue. I pride myself in customer satisfaction. International bidders are responsible for customs restrictions and duty fees for your country.
|
|
|
Warhammer 40k Tau Kroot Carnivore Squad x 12, Includes Metal Shaper
This auction is for 11 Tau Empire Kroot Carnivores and 1 metal shaper as shown. What you see in the pictures are the item/items you are bidding on. Questions? If you have any questions about items just shoot me a message and I will answer as best I can. Shipping: I will pack items as safe as I can. But as with all 40k shipping, some may have to be glued back together upon arrival. Payment: Please try to pay or contact me about payment within 3 days of the end of auction. Thanks and Good Luck! C) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-1478d8bd5c7-0x10d-
|
|
|
Bench Dog metal shaper table insert
Like new shaper table insert. Threads are perfect.
|
|
|
VTG SILKY LACY ZIPPER BULLET BRA METAL BONE GARTER CORSET WAIST CINCH SHAPER C40
VTG SILKY LACY ZIPPER BULLET BRA METAL BONE GARTER CORSET WAIST CINCH SHAPER 38/40 C. THERE ARE 4 GARTERS/ TROLLIES ATTACHED.METAL& RUBBER ONES- ARE ALL ORIGINAL TO SIMPLY ZIP INTO& SEE THAT BEAUTY HOURGLASS PIN UP SHAPE IN ALL WAYS! A CONSTRUCTION DESIGN MADE SO VERY LONG AGO! QUALITY IS SCREAMING IN THIS CORSET BRA CINCHER! SHAPER WEAR ITEM. THE PHOTOS JUST REALLY TELL ALL IN THE FUNCTIONING PIECE THAT IT REALLY IS. SO IF THIS IS THE SILKY TREAT DESIRED LOOK YOU'VE BEEN SEEKING: TAKE UP ON IT FAST" THESE ALWAYS SELL FAST" IT IS PRE OWNED- IN EUC.I SEEN NO FLAWS AT ALL IN THE GIRDLE BRA HERE; A C CUP IT IS. VINTAGE BEAUTIFULLLLLLLLLLLLLLLLLLLLLLLLLLLL THING IT IS. ENJOY BUST-38"40" C WAIST-26" UP TO A 36"38" EVER SO MAXED ALL METAL& RUBBER STOPPERS ON GARTER STRAPS/ METAL BONED. TOTAL WITHOUT ... moreGARTERS-16" WITH GARTER APROX LENGTH- TROLLIE'S ROLL UP& DOWN;23" VTG SILKY LACY ZIPPER BULLET BRA METAL BONE GARTER CORSET WAIST CINCH SHAPER 38/40 C H ELLO& WELCOME. A seller: Whom Feels. Then seeks a rare cut& design- That's what I am all about- Look no more- lover of fabric here- lol. with me. Or at me- this seller delivers"FEELS" Designs" so don't care what'cha think. TO MAKE MY BUYER'S HAPPY AT END IS MY GOAL. A DEAR MAKE IT IS. TRUE LOVER OF FABRICS. SHIPPING HAS WENT UP/ IS CORRECT/ HAVE TAKEN A HUGE BEATING- HAD TO UP AS THE USPS HAS. GOD BLESS/ GOOGLE IT IF YOU FEEL YOU NEED. GOD BLESS AND I SHIP EVERYWHERE. IF YOU CANT PURCHASE FOR SOME REASON WRITE/ I WILL CORRECT IT- SITE ISSUE,I WILL SHIP TO THE MOON CANADA*You should have your own drop down shipping cost bar. If cant locate write me please. AS WITH MANY ITEMS I RECEIVE. THEY IN SOME CASES ARE NEW OLD STOCKED ITEMS THAT HAVE BEEN STORED FOR YEARS. SOME MAY HAVE A FEW SPOTS HERE& THERE. OR HAVE HAD REPAIRS, JUST DINGS& DANGS LIKE AN OLD CHEVY! BUT STILL RUN GREAT ♥ IF AN ITEM HAS SPOTS IN THEM. I WILL NOTE IN CONDITION AREA. IN THESE CASES 99% OF
|
|
|
Billiards - Vintage Wood / Metal Cue Tip Sharpener Shaper
Billiards- Vintage Wood/ Metal Cue Tip Sharpener Shaper Measures approximately 1 1/2" x 2 1/4" across x 7/8" high Shaped and works like a pencil sharpener No International Shipping
|
|
|
Brunswick Single Ball Baby Blue Bowling Bag w/ Metal Rack and Cardboard shaper
A vintage Brunswick baby blue single ball bowling bag with metal rack and cardboard shaper. Its in good shape except for the two oil marks that came from the inside from te ball that are on both stripes. they are pictured. Thanks for looking.
|
|
|
Warhammer 40k Tau Empire Limited Edition Kroot Shaper Anghkor Prok Metal (w307)
Warhammer 40k Tau Empire Limited Edition Kroot Shaper Anghkor Prok Metal(w307) Painted To A Tabletop Standard. Sold as seen. To View the following images. Internet Explorer users can Left Click and Drag the image to the Tabs Bar to view the image. Firefox Users can Right Click and select View Image. Combined postage is available if you purchase more than one item from AA-Wargames. Please check the"Postage and Payments" tab for information on the Combined Shipping status of the item you are interested in. Please aim to pay within 7 days. For UK purchasers paying by cheque. I will wait for it to clear before despatching the items. Where'PPR Basecoated' appears in the item description it means that the model has been Previously Painted and Resprayed. Where'PSR Basecoated' appears in the description it means that the ... moremodel has been Paint Stripped and Resprayed. Please note- The first gallery image contains the whole item that is available in this auction. Any subsequent images are smaller parts of the auction lot. Or the auction lot from a different angle. Please refer back to the first gallery image for an image of the item or items available in this auction. Due to significantly increased prices by Royal Mail we have had to increase our postage prices. However Royal Mail have widened their weight banding so we have reduced our combined shipping rate down to 25p and also increased the number of items that can be combined. To include smaller vehicles. Unfortunately all larger vehicles/models will remain outside of the combined rates. We have also been able to decrease the despatch time as Royal Mail will now collect our outgoing mail more regularly. As of the 5th July 2013 customers from the Russian Federation will be required to pay an additional £6.00 postage for items to be sent via the Royal Mail signed for service. If you have purchased from the Russian Federation please request an invoice before paying. Due to large increases in the number of packages being claimed as lost. All pa
|
|
|
Vintage Women's Shoe Trees Stretchers Red Green + Home Valet Metal Shaper
Two pairs of vintage women's shoe trees. One red and one green. Metal strips with wooden ends; about 11 3/4" long. Plus a metal shoe stretcher/ shaper with"Home Valet Crimmins Products Norristown PA" on the side. Light surface rust on one of the green strips, otherwise very good condition. From a smoke-free. Pet-free environment. Thanks for looking- pleas e visit my eBay store for more bargains and combined shipping discounts! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147bc810d7e-0x112-
|
|
|
SWIVEL HEAD METAL SHAPER or PLANER TOOL HOLDER Walton American No. 6
You are bidding on a SWIVEL HEAD METAL SHAPER or PLANER TOOL HOLDER Walton American No. 6 in great condition hold 1/4" to 3/8" tool bits. Measurements 6 1/2" Long 1 1/8" tall 7/16" wide Holds 1/4" to 3/8" tool bit. SEE PHOTO’S Best Describes the Item up for Auction. Buyer pays S&H.US Buyers If you have any questions or concerns please email me before bidding at. Winning bidder to pay within 3days of close of auction. Good luck bidding. Auction. I will combine shipping on auctions to save on shipping costs. Note to all buyers I am not a expert on this item please ask questions I answers all questions email to me right up to 4 hour before auction ends. Also I expect email contact from buyer within three days Once you receive your item. Please remember to leave feedback. If you have any questions or problems, ... moreplease email me so we can resolve the issue. Negative feedback does not solve the problem, communication does. I am committed to give the best customer service possible Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VTG SPANDEX METAL RUBBER GARTER PIN UP TULIP BASQUE FIRM SHAPER GIRDLE XL NWT
A MUST*DO TELL-IS NWT A NEW ITEM. IN ANYTHING WORN OR- VTG SHOWS GENERAL WEAR UNLESS OTHER WISE NOTED. MEASURES AS. OKAY THIS HAS A TOP AS SEEN THAT GOES OVER THE DRESS ITSELF. MEASURES ARE BELOW TOP RISE-11" WAIST-26" RLXD- UP TO A 40" WGP, HIPS-34" RLXD- UP TO A 44" WGP, TOTAL16- VERYYYYYYYYYYYYYYYYYYYYYYYYY SCARCE GIRDLE HER: THE TRICOT NYLON GUSSY IS REMOVABLE BY SNAPS. ALL WHITE/ TULIP PANEDLED FOR AN EXTREME HOLD AT HIPS& WAIST PANEL AREA. 4 METAL/RUBBER GARTER TROLIIES/ALL ORIGINAL HARDWARE. THIS IS SEARS CHARMODE COLLECTION PIN UP WAIST CINCHING FIRM/ VERY BASQUE WEAR TO SLIM ONE DOWN INTO A NEW SHAPE ALMOST! WITH VTG GIRDLES.WHO NEEDS A GYM! LOL POWERNET NYLON/SPANDEX/LYCRA MIX ♥♥♥ WGP- WITH GENTLE PULL- I NEVER YANK IN MEASURE ♥♥ALL SALES FINAL READ BELOW PLEASE THANKS. WSD=TOTAL MEASURE IS TAKEN WITH ... moreITEMS STRAPS ROLLED ALL THE WAY DOWN/FOLDED IN 2 AS IF ON- BEST ESTIMATE IS GIVEN.XOXOOXO THANKS. TO SOME THIS MUST BE STATED. ALL RULES HIGHLY ADHERED TO All sales are final. Please read for the perfect fit on you- No refunds- No exchanges- Sold as is on any vtg item. THERE ARE NO REFUNDS NOR EXCHANGES OR RETURNS. JUST TAKE THE FEW MINUTES TO READ ALL TO MAKE SURE ITEM/ ITEMS ARE YOUR FIT. OR ASK IF NEED I AM VERY HELPFUL. I NEED TO STATE THAT IF YOU RECEIVE YOUR ITEM AND HAVE A PROBLEM, PLEASE* CONTACT ME AS A SELLER FIRST BEFORE LEAVING A FEEDBACK. I APPRECIATE IT VERY MUCH. THANKS. FEEDBACK IS IMPORTANT TO ALL, CUSTOMER SATISFACTION IS MY GOAL. I LOVE WHAT I DO& HOPE YOU ENJOY ITEMS/ ITEM. WILLING TO MAKE IT RIGHT ♥
|
|
|
Vintage Silver A&J EKCO Adjustable 10-Hole Metal Shoe Stretcher Shaper Tree
Cool metal vintage 10 hole stretchers
|
|
|
Metal Shoe inserts shaper
This auction is for a pair of shoe shaper inserts. They are metal with a flexible arm to fit any shoe. These were used mostly for mens leather dress shoes to keep their shape. But can be used for womens shoes as well. These come from a family estate and are in brand new condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-147e2560d00-0x115-
|
|
|
Warhammer 40k Tau Kroot Shaper Primed White Metal OOP
Shipping is only to the USA- International shipping will be through the ebay global shipping program only! For sale is a Warhammer 40k Tau Kroot Shaper. He has been primed white and is ready to paint. This model is metal and has been long out of production. You will receive exactly what is pictured. Please view my other auctions for more Warhammer goodies! Shipping will be via USPS First Class mail at a $3.95 standard fee. This includes packaging and handling. We combine shipping on multiple auction wins. Please request a combined shipping invoice BEFORE making payment. International shipping will be through the ebay global shipping program which may charge you additional postage/fees/taxes/etc beyond our shipping costs. You are responsible for any customs or any import duties that may be charged by your country. Please note: The global shipping ... moreprogram does not combine shipping costs and we have no way of sending a combined invoice for your purchase if you are an international bidder.
|
|
|
Warhammer 40k Tau Empire Kroot Shaper With Pulserifle Metal (w795)
Warhammer 40k Tau Empire Kroot Shaper With Pulserifle Metal(w795) PPR Basecoated. Sold as seen. To View the following images. Internet Explorer users can Left Click and Drag the image to the Tabs Bar to view the image. Firefox Users can Right Click and select View Image. Combined postage is available if you purchase more than one item from AA-Wargames. Please check the"Postage and Payments" tab for information on the Combined Shipping status of the item you are interested in. Please aim to pay within 7 days. For UK purchasers paying by cheque. I will wait for it to clear before despatching the items. Where'PPR Basecoated' appears in the item description it means that the model has been Previously Painted and Resprayed. Where'PSR Basecoated' appears in the description it means that the model has been Paint Stripped ... moreand Resprayed. Please note- The first gallery image contains the whole item that is available in this auction. Any subsequent images are smaller parts of the auction lot. Or the auction lot from a different angle. Please refer back to the first gallery image for an image of the item or items available in this auction. Due to significantly increased prices by Royal Mail we have had to increase our postage prices. However Royal Mail have widened their weight banding so we have reduced our combined shipping rate down to 25p and also increased the number of items that can be combined. To include smaller vehicles. Unfortunately all larger vehicles/models will remain outside of the combined rates. We have also been able to decrease the despatch time as Royal Mail will now collect our outgoing mail more regularly. As of the 5th July 2013 customers from the Russian Federation will be required to pay an additional £6.00 postage for items to be sent via the Royal Mail signed for service. If you have purchased from the Russian Federation please request an invoice before paying. Due to large increases in the number of packages being claimed as lost. All packages over £70 in value
|
|
|
Metal Shaper, Smith Mills, 16”
Metal Shaper. Smith Mills, 16” with 10” vice. Probably early 1900s. Conversion from line shaft drive to motor drive partially completed by previous owner. No motor. Some tooling included(see pic) Mounted on pallet. Nice dealer plate from San Francisco(see pic) Stored indoors. I will NOT ship. I cannot help load; provide your own muscle and moving equipment. Weighs close to 2000 pounds(I think) $275 Paypal ONLY. U.S. bidders only. PAYPAL ONLY. Payment must be made within 3 days. ALL SALES ARE FINAL AND SELLING"AS IS" THANK YOU! No refunds! Please make sure you read our description before you place a bid. All sales are final. Please Email us with any questions you may have prior to bidding on this item. Buyer responsible for all moving and handling. No exceptions! Payment must be made within 3 days after auction ends or item will ... morebe relisted.
|
|
|
Vintage ATLAS Model 7B Metal Shaper w/ Instruction & Parts Catalog Reprint
From a small town machinist's estate in Eastern Colorado. ATLAS 7B metal shaper as shown. Used condition. I checked for lube. Oiled where I thought it needed a little, plugged it in and it runs. I don't know about this type of machine and it comes with the items shown plus the reprint catalog not shown. I have learned that it is missing the rear door and the front pulley guard. I don't know what, if anything, else is not present. Weighs in at 250 lbs. +, so local pickup or freight are the shipping options. Please ask any questions. As-is, as-found. Fro a Freight Quote please message your Zip Code. And whether you will need a lift gate, and if it's a residential or commercial address.
|
|
|
"Rare" Atlas Metal Shaper Internal Boring Spline Key Way Cutter Tool Holder
Excellent used condition. Used for internal splines. Keyways, etc. Includes a Williams boring bar. Tool is 5 1/2" OAL, shank is 4 1/2" long, 3/8" wide, 7/8" tall, holds 1/2" dia. bars. Comes as shown.
|
|
|
(k927) Warhammer 40k Tau Empire OOP Metal Kroot Shaper
This item is for(1) Warhammer 40k Tau Empire OOP Metal Kroot Shaper. Shipping UNITED STATES: Shipping is $2.99 through first class mail. Combined shipping is $0.40 for each additional item. CANADA: Shipping is $8.50 through first class international. Combined shipping is $1.50 for each additional item purchased. ALL OTHER COUNTRIES: Shipping is $11.50 through first class international. Combined shipping is $1.50 for each additional item purchased. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. All Buyers When you have finished buying or bidding on auctions please send a request for an invoice ... moreof the total so we can properly calculate shipping discounts. Payment is expected within 5 days. I pack my items securely in bubble wrap and packing material to minimize potential shifting while in transit. 14 day return policy. Buyer pays shipping. Paypal users only. Please leave feedback as i will do the same. Thank you! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Metal Shaper Boring Bar Tool Holder J.H. Williams No.48
Metal shaper boring bar holder. J.H. Williams& Co. No. 48 shaper tool holder. 8 1/2 inches long. Shank size 1 5/16" tall x 5/8" wide. 15/16 hole for bar. In very good condition.
|
|
|
ATLAS METAL MACHINE TOOLS CATALOG M.52 1952 #RR165 lathe shaper Milling Machine
This sale is for ONE previously owned COPY of: Atlas Press Company. ATLAS MACHINE TOOLS CATALOG No. M.52. Kalamazoo 1952) 35 pages bound in a soft cover that is detached from the body. Please note that the name of a previous owner is written on the front cover and and that there is an old dealer's stamp on the back cover. Also a section is cut out of page 15/16. This catalog describes the features and specifications of lathes, shapers, milling machines, drill presses and accessories all with images. This item is in good overall condition and would make a nice gift for the collector of Atlas products. This PUBLICATION is being offered at any exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. ... moreWe now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component.If any legal action ensues,the buyer agrees to pay all legal costs of th
|
|
 |