In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
60.05
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Take on projects of all shapes and sizes with the 4-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you ... moreto grip the outside of stock between 1.6 to 2.8 inches in size, or to hold internal pilot holes ranging from 2 to 3.2 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. The 1” x 8TPI mounting thread fits a wide variety of wood lathes, including the WEN 3420, 3420T, 3421, 3424, 3424T, 34018, 3427, 34018, 34027 and 34034. .
$
200.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Victorville, United States
Please see pictures for condition Looks like it's never been used or installed Not sure what size
$
169.50
Buy It Now
$28.00 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 8" 3-Jaw Self-Centering Lathe Chuck Reversible Jaws +. 0039" TIR Runout Certificate NEW. Both side of jaw teeth and guides are ground and hardened ... moreto HRC 58-62. Internal Jaw External Jaw. Semi-steel chuck body made from high quality cast iron.
$
151.75
Buy It Now
$28.00 Shipping
Condition: New
Location: Saint Charles, United States
LATHE CHUCK CATEGORYIndependent Lathe Chucks. Both side of jaw teeth and guides are ground and hardened to HRC 58-62. 1 lathe chuck key. Semi-steel chuck ... morebody made from high quality cast iron. CHUCK THICKNESS2.559.
$
200.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Baldwin Park, United States
No back plate No key
$
149.99
Buy It Now
$15.00 Shipping
Condition: New
Location: Eagle, United States
The Chuck Stop by Edge Technology is designed to locate shorter parts beyond the chuck jaws to provide clearance for facing operations. The Chuck Stop ... moreincludes 10 sets of different height parallel bars to achieve the required spacing.
$
14.99
Buy It Now
Free Shipping
Condition: Used
Location: Mansfield, United States
MAKER - CUSHMAN. CHUCK JAWS (X2). 1 3/4" LONG, 17/32" WIDE, 1 9/32" TALL.
$
180.00
Buy It Now
$19.99 Shipping
Condition: New – Open box
Location: Montebello, United States
Lathe Chuck Bit Winter 2 1/4. Shipped with FedEx Ground or FedEx Home Delivery.
$
47.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life. It has two sets of jaws that can hold ... moreindustrial parts in the range of 0.078" / 2 mm - 3.54" / 90 mm.
$
101.65
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck ... more& back plate more concentric with the lathe spindle.
$
48.47
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature: Diameter: 3"/80mm Max. Imput Torque: 40Nm Max. Speed: 4800r/min New and High Quality. Model: K11 80 Chuck Type: Three Jaw Chuck Power Type: Manual ... moreChuck Diameter: 80mm / 3.15in Description: 3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws New and High Quality. The 3-Jaw Self-Centering Chuck Features Short Cylindrical Center Mounting. Semi-Steel Chuck Body is Made From High Quality Cast Iron, Durable In Use. Package List: 1 x Lathe Chuck 3 x Jaws 1 x Wrench 3 x Screw 3 x Nut Notes: Pls check your old picture or model when you order it..
$
85.00
Buy It Now
$24.00 Shipping
Condition: New – Open box
Location: Greenwood, United States
This is a brand new Shop Fox#D3609 heavy duty 6" diameter x 3-Jaw Self Centering Metal Lathe Chuck with a plain back. This beautiful chuck has the ... morefollowing specifications: Body is 6.3" 160mm) in diameter x 2.6" 65mm) thick(jaws project 1.14" out from body) The thru hole is 1.77" 45mm) Includes(3) Inside jaws. 3) outside jaws, large safety chuck key, 3) 8mm mounting bolts, Allen wrench Smallest diameter gripped by jaws =.118" 3mm) Largest diameter gripped by jaws = 5.709" 145mm) Run-out of chuck body =.0033" 085mm) Run-out of test bar in jaws =.0063" 160mm) This is a plain back chuck. But it has(3) 8mm threaded holes on the outer ring in a 142mm dia bolt hole circle.positioned 120 degrees apart. Please email if you have any questions. It will be up to the buyer to determine if this chuck will fit your lathe.we do not have a way of determining this for you. WE DO NOT CARRY BACK PLATES TO FIT THIS CHUCK. If you need an accurate. Heavy duty, self centering chuck at an affordable price, this high quality imported chuck will fill the bill. We carry the following metal lathe chucks: 4" x 3-Jaw Simultaneous. 5" x 3-Jaw Simultaneous. 6" x 3-Jaw Simultaneous 6" x 4-Jaw Independent. 8" x 3-Jaw Simultaneous. 8" x 4-Jaw Independent Please email for details and prices. You are welcome to email with any questions. And thanks for viewing. Try searching our ebay store for hundreds of additional tool values. FAST SHIPPING INCLUDED in the USA. International buyers should email for shipping quote before buying. Shipping weight is 20 lbs.
$
116.56
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
INTBUYING®. K11-160A Three Jaw Chuck. - Chuck bayonet nickel plating, durable. - The overall structure of chuck is reasonable, good rigidity, can withstand ... morelarge torsion force. K11-160A chuck 1. Material: Grey cast iron.
$
121.26
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Lathe Chuck. 4 Jaw Chuck K12-160. 1set of 4 Jaw Chuck K12-160 (053308). Center Hole: 1.771". ▲ 6 months' warranty for the machines, not for the consumables. ... moreHope for your understanding. Model: K12-160.
$
118.95
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 4" 3 Jaw Self Centering Lathe Chucks w/ TIR Certificate + 1-8 Back Plate New. For back plate you would not need to drill any mounting holes but ... moreyou will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
64.37
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification: Size: 130 mm (5.1") Outside Diameter: 130 mm (5.1") Bolt Circle Diameter: 115 mm (4.25") Center Thru Hole Diameter: 30 mm (1.18") Chuck ... moreBody Thickness: 60 mm (2.28") Internal Jaw Clamping Range (A-A1): 3-40 mm (0.12"-1.58") Internal Jaw Jamming Range (B-B1): 40-130 mm (1.58"-5.12") External Jaw Clamping Range (C-C1): 40-120 mm (1.58"-4.7") Mounting Thread: 3-M8 Accuracy: 0.002" Package Including: 1 x Lathe Chuck 3 x Jaws 1 x Wrench 3 x Screw 3 x Nut Features:.
$
68.82
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
$
47.50
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Features: 3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws New and High Quality. The 3-Jaw Self-Centering Chuck Features Short Cylindrical Center ... moreMounting. Semi-Steel Chuck Body is Made From High Quality Cast Iron, Durable In Use. Specifications: Diameter: 3"/80mm Max. Imput Torque: 40Nm Max. Speed: 4800r/min New and High Quality. Model: K11 80 Chuck Type: Three Jaw Chuck Power Type: Manual Chuck Diameter: 80mm / 3.15in Package Included:.
$
59.09
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
4 Jaw Independent Chuck 50mm Dia M12X1 Threaded. 50mm Independent Chuck 4 Jaw. Body is made of graded cast iron. Jaws are made of tool steel, hardened ... more& ground.
$
189.00
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
92.84
Buy It Now
$17.89 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 3" 3 Jaw Self Centering Lathe Chuck w/ Cert.003” TIR 5C Shank Arbor NEW. LATHE CHUCK CATEGORYSelf Centering Scroll Chucks. Self Centering lathe ... morechuck will open and close all 3 jaws simultaneously.
$
120.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Internal Jaw Clamping Range 1 x Lathe Chuck. External Jaw Clamping Range Bevel Gear Material Chuck Body Material 160 mm (6.3"). Unit Weight 50-160 mm ... more(1.97"-6.3").
$
28.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Used for Lathe Chucks, 3 or 4 or 6 jaw chucks. Suitable for all makes.
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
The K72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. It features a wide clamping range and high precision. ... moreSo you can deal with a variety of materials after fastening it with a single T handle.
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Feature: Short-cylinder center installation and threaded installation. which are simple. fast and convenient. Material: Hardened Steel Model:K01 50,K01 ... more63,K01 80,K01 100 Package Included: 1Pc Lathe Chuck Note: Due to the lighting, there may be slight differences in colour between the actual item and the picture.
$
98.19
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Lathe, economical CNC lathes, grinding machines, milling machines, drilling and machine accessories etc. Lathe Chuck Type: Miniature Lathe Chuck. Application: ... morefor CNC Drilling Milling Machine. Jaw: 3 Jaw (Two Pcs Tongue And Groove Reversible Hardened Top & Bottom Jaws.
$
110.00
Buy It Now
Free Shipping
Condition: New
Location: Hollis, United States
Compatible with lathe that use 1”x 8 tpi thread, and 3/4" x 16 tpi using the adapter. Include: Chuck Body、round Jaws 、big round. Tightening Gear Key, ... moreT-Allen wrench, Screw chuck, adapter converts 1" x 8TPI to 3/4" x 16TPI.
$
56.75
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature:.
$
89.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Revolving Center MT2 & MT3 Shank + 3 Jaw Self Centering Chuck 50mm & 65mm Threaded M14X1. High Precision Morse Taper MT3 & MT3 Shank Revolving Live Center ... morewith M14 x 1 thread. With 50MM & 65mm 3 Jaws Self Centering Lathe Chuck.
$
81.95
Buy It Now
$17.80 Shipping
Condition: New
Location: Saint Charles, United States
Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62. Internal Jaw External Jaw. Semi-steel chuck body made from high quality cast ... moreiron. Each pinion is ground and hardened to HRC 43.
$
56.99
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
Self Centering Chuck4 Jaw With Outer Dia.2-1/2" (65mm). Lathe Chuck. Reversible Jaws. Body is made of graded cast iron. Jaws are made of tool steel, hardened ... more& ground. PROUDLY MADE IN INDIA. Situated at the industrial hub of India we specialize in providing complete tooling solutions.
$
64.63
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Size: 130 mm (5.1") Outside Diameter: 130 mm (5.1") Bolt Circle Diameter: 115 mm (4.25") Center Thru Hole Diameter: 30 mm (1.18") Chuck ... moreBody Thickness: 60 mm (2.28") Internal Jaw Clamping Range (A-A1): 3-40 mm (0.12"-1.58") Internal Jaw Jamming Range (B-B1): 40-130 mm (1.58"-5.12") External Jaw Clamping Range (C-C1): 40-120 mm (1.58"-4.7") Mounting Thread: 3-M8 Accuracy: 0.002" Features:.
$
18.87
Buy It Now
Free Shipping
Condition: New
Location: United States
The Jaw Chuck is divided into a Inside Jaw Chuck and a Outside Jaw Chuck, this is a Outside Jaw Chuck. 3 Outside Jaw Chuck. This is a chuck that can be ... moreused to extend the machine functions. The self-centering chuck features short cylindrical center mounting.
$
10.00
4d 6h 10m 55s
0 bids
$14.50 Shipping
Condition: New
Location: Lansing, United States
Product Condition: New.
$
16.95
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
SHARS 3/8" Self-EjectingKey for 5" & 6". 8" 4 Jaw Independent Lathe Chuck 6" 3 Jaw Self Centering Scroll Lathe Chuck Solid Jaws 6" 4 Jaw Self Centering ... moreScroll Lathe Chuck Solid Jaws 6" 3 Jaw Self Centering Scroll Lathe Chucks 2 Piece Reversible Jaws.
$
13.95
Buy It Now
Free Shipping
Condition: New
Location: Norcross, United States
Item No. 235- 0716 Features: Free shipping to the U.S. For the lathe job application. A real picture of product. Hardened and heavy duty.
$
15.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
LATHE CHUCK CATEGORY Lathe Chuck Keys. You may ask for freight cost before buying tools.
$
22.80
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
DIY Spindle Chuck Bearing Seat Pulley Bench Saw Wood Drill Rotary Lathe Chuck US. Can be used for DIY unpowered spindle. Drill Chuck TypeDrill Chuck. ... moreChuck TypeKeyless. Mount Typevertical style.
$
82.10
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
If that’s not enough, you can also install the included screw depending on the task at hand. The 1” x 8TPI mounting thread fits a wide variety of wood ... morelathes, including the WEN 3420, 3420T, 3424, 3424T, 34018, 3427, 34018, 34027 and 34034.
$
130.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
These K11 lathe chucks own two-piece jaw design with a master jaw and a top reversible jaw in high standard tongue and groove specification. Both side ... moreof jaw teeth and guides are ground and hardened to HRC 58-62.
$
126.29
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Heavy-duty lathe chuck set will hold your work tight and secure on midi and full size woodworking lathes. Holds spindles and bowl blanks from the inside ... moreor outside. Includes universal adaptor. Also includes a set of hand wrench, screw sets and tightening levers.
$
278.00
Buy It Now
$84.17 Shipping
Condition: New
Location: Madison Heights, United States
6" 4 jaw self-centering lathe chuck. with 2pcs top& bottom tongue groove reversible jaws. jaws ground and hardened. PRECISION SEMI-STEEL BODIES. ... moreTOP QUALITY. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING. 1-3/4" THRU HOLE DIAMETER On Jul-26-11 at 15:09:20 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
18.95
Buy It Now
$16.99 Shipping
Condition: New
Location: Salina, United States
Abbott TG8MDS2 Pointed Soft Steel Lathe Jaws for 8" Chucks. Dimensions 4" x 4" x 1/2". Please view pictures closely. The jaws in the photos are exactly ... morewhat your getting. Ships safely within two business days. Please let me know if you have any questions. Thank you!
$
99.95
Buy It Now
$15.50 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
88.99
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Specifaication: Material: Steel Chuck Diameter: 2.75inch (95mm) Clamping Range: 1-1/5"(30mm) to 2"(52mm) Support Range: 1-2/5"(37mm) to 2-2/5"(60mm) Thread: ... more1'' x 8 TPI Package Included: 1Pc 4-Jaw Self-Centering Lathe Chuck Note: Due to lighting, the colour of the actual product may differ slightly from the picture of the product.
$
115.00
Buy It Now
$9.62 Shipping
Condition: New
Location: Thomasville, United States
Up for sale is a new 5C mount 4" chuck with 3-jaw lathe chuck. This independent chuck comes with a wrench for easy installation. It is perfect for workholding ... morein a variety of industries, including CNC, metalworking, and manufacturing. The country/region of manufacture for this item is unknown. Don't miss out on the opportunity to add this reliable workholding tool to your collection today.comes with outside jaws
$
75.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Converse, United States
High precision short cylindrical center mounting. Why not give it a try!
$
58.84
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
MINI Lathe 4 Jaw Self-Centering Chuck 50mm With MT2 Mounting Shank Arbour.
$
35.33
Buy It Now
Free Shipping
Condition: New
Location: China
Product: Mini 4 Jaw Lathe Chuck Self Centering Chuck Milling Wood Turning Chuck. - Suitable for machine accessories such as woodworking lathes, grinding ... moremachines, milling machines, drilling machines, etc.
$
53.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
K72 4-jaw self-centering chucks with independent jaws feature short cylindrical center mounting. It can be used to extend machine functions. Both sides ... moreof jaw teeth and guides are ground and hardened.
$
63.99
Buy It Now
Free Shipping
Condition: New
Location: United States
It only needs to be installed in the correct order, which is simple, fast, and convenient. 【QUALITY MATERIAL】 - The lathe chuck body is made of high-quality ... morehardened steel, and the hardness test of the jaws and guides is HRC 58-62.
$
94.36
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
$
13.95
Buy It Now
$1.95 Shipping
Condition: New
Location: Acworth, United States
They will fit chuck jaws with a width of 15mm and length of 100mm. Designed to fit a chuck with 3 jaws. The depth sizes you will receive are: 5mm x2 and ... more10mm x2. Give us a call.
$
54.86
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
3 JAW 65mm CHUCK WITH MT1 MT2 MT3 SHANK ARBOR. Self Centering Chuck3 Jaw With Outer Dia.2-1/2" (65mm). 1MT Shank Arbor's Drawbar - M6x1. 2MT Shank Arbor's ... moreDrawbar - M10x1.5. 1MT Shank Arbor's Drawbar - M12x1.75.
$
139.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
5" 4-jaw lathe chuck with independent jaws, with rear mounting K72 125MM1-3/16" Diameter thru hole.Rear mounting screws circle Diameter: 108mmRear recess ... moreDiameter: 95mmMounting screw threads: 3-M8 3 or 4 mounting holes
$
59.50
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
Threaded M12 x1. Reversible Jaws. Jaws are made of tool steel, hardened & ground. 4 Jaw Independent Chuck 50mm Dia M12X1 Threaded. 50mm Independent Chuck ... more4 Jaw. Skylark Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest Indian industrial standards.
$
19.31
Buy It Now
Free Shipping
Condition: New
Location: Melville, United States
Made in USA Lathe Chuck Camlock Stud 5/8" Diameter, D1-4 Spindle, 7/16-20 Thread
$
149.95
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
125.00
Buy It Now
$31.00 Shipping
Condition: Used
Location: Aston, United States
$
91.21
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Why Choose VEVOR?. Series: K12. Our four-jaw lathe chuck is quenched with high-quality steel that is rust-resistance and corrosion-resistance. The clamp ... moremouth holds firmly and is convenient for stable operation.
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
Jacobs # 100 Center Rest Armature Lathe Chuck 1/4" - 3/4" Cap. MT1 / A 142
Hello Folks. This Jacobs# 100 Center Rest Armature Lathe Chuck has 1/4" 3/4" mounted on# 1 Morse Taper Shank. Works properly. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
JACOBS NO. 14N 1/2" BALL BEARING SUPER CHUCK, DRILL, MILL, LATHE
NOTHING WRONG WITH THIS.
BOLEY WATCHMAKERS LATHE BEZEL CHUCK 8mm Six Jaw Wolf Jahn Lorch Bergeon
Here we have a Boley Watchmakers lathe Bezel Chuck for the 8mm lathe. In good working order. Diameter is 74mm. Will fit all standard 8mm lathes. Made in Germany by Boley. Must have part of a lathe and top quality. I have other tooling listed. Please view my other items of interest to the Watchmaker cleared from a Workshop to include other watchmakers tooling. Postage costs. UK=£8.25.
Watch makers Vintage lathe tools, 4xstep chuck colletts
Vintage watch makers lathe tools 4x step chuck 8mm colletts numbered 6. 2, 5, the 4th just has a single" step" and no number. I am happy to combine postage
Watch Tools Lathe Tool Levin Balance Balloon Chuck Set
Description Balloon Chuck set for you lathe. Used for polishing pivots of balances. Small for wrist watch balances and large for pocket watch balances. The small one is missing the top cap as seen in the pictures. Payment Please bid only if you intend to pay. I will ship to your valid paypal address. Payment expected within 4 days of end of auction. Shipping I combine shipping whenever possible to save the buyer money. Sometimes the size or weight of an item prevents this so if you have questions please ask otherwise I will be glad to put more than one purchase in the same box and ship them for one price plus insurance for the all items. International customers: I will ship most items small flat rate priority mail; however if the item value exceeds $100. I will send the item express mail this is the only method that offers tracking. I will ... morenot alter the value of an item on a customs form and the buyer is responsible for any taxes or customs fees in their country. If your item does not arrive please check to see of it is being held for pickup or held in your customs office this has been a problem in the past. I insure all packages. If a claim needs to be filed please be aware you will have to sign forms that will be sent from the insurance company. Please note: All claims must be filed within 90 days of the ship date. Also. If the claim is for lost shipments you must wait before filing: 21 days for domestic shipments, 60 days for shipments to Italy, 45 days for shipments to all other international locations(including shipments from the U.S. to Canada, from Canada to the U.S. and from U.S. to APO/FPO addresses. Terms of Sale If the item is received substantially different from described. The item may be returned within 14 Days. Buyer must contact us within 3 Days after receipt indicating their concern before it is shipped back to us. The item must be returned in the same condition it was sent. Buyer and seller will agree upon the shipping method that is to be used. Only the selling price of the item will be re
L@@K! NICE MINT GERMAN MADE LEINEN 8mm LATHE COLLET WIRE CHUCK SIZE 12
READ THE COMPLETE LISTING BEFORE BIDDING SO YOU ARE AWARE OF ALL PAYMENT INSTRUCTIONS& THE COMPLETE DESCRIPTION SPECIFYING ANY FAULTS/CONDITIONS ETC! LEINEN 8mm LATHE COLLET WIRE CHUCK SIZE 12 PICK-UP CAN BE ARRANGED IN RICHMOND BC SHIPPING INCLUDES FULL INSURANCE AND TRACKING I DO NOT MAKE MONEY ON THE SHIPPING I CHARGE THE ACTUAL POSTAGE PLUS $1.50 HANDLING- ONCE POSTED. ANYTHING MORE THAN $1.50 OVERPAYMENT ON THE SHIPPING WILL BE REFUNDED I AM HAPPY TO ACCEPT MOST LEGAL FORMS OF PAYMENT INCLUDING PAYPAL. BUT PREFER PAYMENT BY CHEQUE. OR CASH. ITEM WILL BE POSTED ONCE PAYMENT CLEARS) PLEASE DO NOT PAY UNTIL I SEND YOUR INVOICE WITH INSURANCE& SHIPPING OPTIONS! THANKS FOR LOOKING! I WILL COMBINE SHIPPING SO PLEASE LOOK AT MY OTHER LISTINGS! NOTE: WHILE I EILL ALWAYS TRY TO SHIP AS SOON AS POSSIBLE. I WORK SHIFT WORK& IT CAN TAKE ... moreUP TO A WEEK AFTER PAYMENT CLEARS BEFORE I CAN SHIP. ALL SALES ARE FINAL SO PLEASE BE SURE TO LOOK AT ALL THE PICTURES AND ASK ANY QUESTIONS YOU MAY HAVE BEFORE BIDDING. I WILL DO MY BEST TO ANSWER THEM AS QUICKLY& ACCURATELY AS POSSIBLE. I TRY TO DESCRIBE EVERYTHING AS ACCURATELY AS POSSIBLE. HOWEVER, AS I AM NOT AN EXPERT IN EVERY THING I SELL, OCCASIONALLY I MAY MAKE A MISTAKE. IF YOU NOTICE ONE PLEASE LET ME KNOW. THANKS FOR LOOKING& ENJOY THE AUCTION. ROWDYRODDYPIPER1 at GMAIL dot COM I HAVE MANY OTHER WATCH& CLOCKMAKER RELATED ITEMS THAT WILL BE COMING UP FOR SALE. FEEL FREE TO CONTACT ME WITH ANY SPECIFIC REQUESTS AND I CAN LIST WHAT YOU ARE LOOKING FOR IF I HAVE IT.
Okuma L1420 CNC Lathe, 15" Chuck, Tailstock, 3.15" Bar, Chip Conveyor, OSP5020
CNC Machine Tool Services 1666 Oakbrook Drive. Gainesville, GA. 30507 706-783-5091 fax 770-401-3572 cell Email- sales@cncmts.com For a link to our website. Please click on this icon OKUMA L-1420 TWO AXIS CNC LATHE SPINDLE NOSE: ASA A2-8 SPINDLE BORE: 3.15" BAR CAPACITY: 2-5/8" MAXIMUM SPINDLE SPEED: 2800 RPM NUMBER OF SPINDLE SPEEDS: INFINITELY VARIABLE CHUCK SIZE 15" KITAGAWA) MACHINE TRAVELS CROSS SLIDE(X-AXIS) 9.05" LONGITUDINAL(Z-AXIS) 26.38" CUTTING FEED RATE: 0.0001– 40 IPR RAPID TRANSVERSE X: 472 IPM RAPID TRANSVERSE Z: 591 IPM TURRET TYPE: AUTO/V12 NUMBER OF TOOLS: 12 TOOL CLAMPING: BOLT CLAMP BED LENGTH OF SLIDEWAY: 59.94" WIDTH OF SLIDEWAY: 18.11" MOTORS MAIN SPINDLE: 30 HP X-AXIS SERVO MOTOR: 2.7 HP Z-AXIS SERVO MOTOR: 5" HYDRAULIC POWER PUMP MOTOR: 2 HP COOLANT PUMP MOTOR: 34 HP COOLANT ... moreCAPACITY: 60 GALLONS HYDRAULIC TAILSTOCK DIAMETER OF QUILL: 3.94" TAPER OF CENTER: MT#5 QUILL STROKE: 4.72" WEIGHT BETWEEN CENTERS 1375 LBS. HYDRAULIC POWER UNIT TANK CAPACITY: 14 GALLONS PRESSURE RANGE ADJUSTMENT: 450 PSI FLOW: 6.6 GPM FLOOR SPACE. APPROX. 128.7" X 68.7" WEIGHT. APPROX. 13,600 LBS ELECTRICS: 220V. 3 PH, 60 CYCLE I ALSO HAVE A 12' KITIGAWA CHUCK AND A COLLET CHUCK THAT CAN BE INCLUDED WITH THIS MACHINE- DEPENDING ON FINAL SALES PRICE. THESE ITEMS ARE NOT INCLUDED IN THE PRICE. BUT CAN BE NEGOTIATED. Please go to our website for our terms and conditions. This machine is under power and ready for inspection. Very good condition. Quiet Spindle. Turret, Axis, etc. Very Strong, heavy duty machine. Its ready to start producing now. We have all the manuals& Toolholders. 2) Riten Live Centers are included. Rear Discharge Chip Conveyor. We also can arrange the transportation to your facility using one of our trusted truck lines. Considering we ship machines all over North America. We get great rates on shipping costs. Sold with a 30 day return privilege. Please refer to our website for all the terms and conditions of sale. CNCMTS will also prov
1998 Mori Seiki Model SL-80 CNC Lathe 24" Chuck, Chip Conveyor
MORI SEIKI Model SL-80A CNC LATHE/ TURNING CENTER Serial# 365 See it onYouTube! http:www.youtube.com/watch?v=McAEPYggm6A Specifications Chuck: 24" Cushman hydraulic power chuck(top tooling not included) Max Swing: 39.3" Max Swing over Carriage: 35.4" Spindle Bore: 8.5" Spindle Nose: A2-15 Spindle Speeds(4 Gear Range) 750 RPM MAX Turret Position: 6( no turret holders) Horse Power: 60hp Dimensions: 205"x95"x96" Weight: 35.200 lbs Control: Fanuc MSC 501 Chip Conveyor and coolant tank included. Condition: The machine runs well but there is wear and a gouge on the ways(see photo) Inspection: Please email Steve at slshighlander@gmail.com or call at 937-545-9932 to answer question and arrange onsite inspection. Buyer to Payer loading fee of $1000.00 Payment: Cashiers check or wire transfer.
SET OF 10 BRASS JEWEL CHUCKS TO FIT #50 WIRE CHUCK LATHE JEWELER WATCHMAKER
Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 SET OF 10 BRASS JEWEL CHUCKS TO FIT#50 WIRE CHUCK LATHE JEWELER WATCHMAKER v SET OF 10 BRASS JEWEL CHECKS– TO FIT#50 WIRE CHUCK v IN ORIGINAL HOLDER v ALL CHUCKS APPEAR TO BE IN VERY GOOD WORKING CONDITION v CHUCKS NUMBERED: 10. 13, 14, 16, 18, 20, 22, 24, 26, 28 v HOLDER MEASURES: 1 ½ X 2 ¼ X ¾ INCHES v TOTAL WEIGHT: 8 OUNCES NOTE: PICTURES REPEAT BELOW AND CAN BE SUPERSIZED‘WE PACKAGE WITH CARE’ See our feedback please! WILL COMBINE SHIPPING ON MULTIPLE ITEMS WOULD BE HAPPY TO ANSWER ANY QUESTIONS Thank you! Lot 1522 On Apr-14-13 at 19:01:44 PDT. Seller added the following information: Click to view supersize ... moreimage Click to view supersize image Click to view supersize image
8" Howa CNC 3 Jaw Power Lathe Chuck H01MA8S-A6
ebay template View all shipping options by clicking the"Shipping and Payments" button. Description Info Info Howa CNC Power Lathe Chuck Item Specifics: Model: H01MA8S-A6 Condition: Used Features: 8" 3-Jaw Packaging Condition: Not original*All dimensions are approximate Click the enlarge button for larger or additional pictures! Local Pickup We have moved to a NEW location! Our new address is 5414 Front street Kansas City. Mo 64120(eBay pickup located off Southern street at dock 13) If you would like to pick up your item locally. Please choose“Payment on Pickup” as your shipping option when using eBay checkout. You will not pay for your item(s) at that time. Once you have checked out with eBay. We will be notified by eBay and have your item ready for pick up the next business day. You will be required to make payment at our ... morefacility at the time of pick up. We will provide a secure computer on which you can make your instant payment directly to our Paypal account. Or, you can make your payment via credit or debit card only. Sorry we are unable to accept cash. Your total will be the final sale price of the item, local sales tax, and a minimal $2 handling fee per item. Pickup hours: Monday-Wednesday 8:00am– 4:00pm. Thursday 8:00am– 2:00pm, Friday 8:00am– 5:45pm. If you wish to pay via Paypal e-check. Please email us for further instructions. Thank you Please inspect your item for damage. We can not be responsible for items once they leave our location. Shipping Info We only ship to the U.S.A. and Select Countries We only ship to the Paypal confirmed address Please note: we do not allow for anyone to arrange their own shipping on products we sell. All items must be either locally picked up by customer. Or shipped using one of our shipping methods. Your item will be shipped in 2-4 business days after payment has been received. Please note: Due to eBay checkout changes& combined shipping rules. At this time we are unable to offer combined shipping or multiple item shipping discounts. All items will be
Orig. 4" Atlas 3 Jaw lathe chuck #M845B 1" x 10 TPI plus MT 2 attachment
Original 4" Atlas 3 Jaw lathe chuck#M6-845B 1" x 10TPI with Homemade Brass M T 2 adapter in good used condition. Normal 0 false false false MicrosoftInternetExplorer4 T hank you for looking at this item.Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when beneficial. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. Here at Bill’s Tools& Used Machinery we offer a Money Back guarantee No Questions Asked(well we might ask why but will not refuse ... morereturns) customer satisfaction is very important to us All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly, most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Again Thanks for looking Bill& B
Boley Carrier Chuck for Watchmakers lathe with 16 Brass Accecories?
Boley Carrier Chuck for Watchmakers lathe with 16 Brass Accecories? Collet on carrier chuck is 6.5mm. Centre hole is a taper. This came with what look like a selection of wax chucks with tapered shanks.161" to.187" I am uncertain as to their use. Or if they belong together. Any information welcome. UK tracked shipping £6 I ship tracked worldwide with Airsure or Fedex-please ask for a quotation.
Boley Large Brass Wax Chuck for Watchmakers lathe
Boley Large Brass Wax Chuck for Watchmakers lathe Collet is 6.5mm. Marked Boley Germany. 50mm across. I ship tracked worldwide with Airsure or Fedex-please ask for a quotation.
GALAXY QUASAR CNC LATHE - Fanuc Controls, Bar feed, Tailstock, 10" Hyd. Chuck
GALAXY QUASAR 250 CNC TURNING CENTER MODEL TNL100TL- NEW 1995- VERY GOOD WORKING CONDITION MAXIMUM SWING DIAMETER- 15" MAXIMUM TURNING DIAMETER- 12" MAXIMUM TURNING LENGTH- 23" TURRET TRAVELS X. Z- 7.9" 23.6" BAR CAPACITY- 2" SPINDLE NOSE- A2-6" SPEED RANGE- 30-3000 RPM TURRET STATIONS- 12 RAPID TRAVERSE-X) 787 IPM RAPID TRAVERSE-Z) 945 IPM SPINDLE DRIVE MOTOR-30 MIN/CONT. 25/20 HP AC APPROXIMATE WEIGHT- 11.200 LBS APPROXIMATE MACHINE DIMENSIONS- 103"LR) X 72"FB) X 74"H) EQUIPPED WITH- FANUC OTC CNC CONTROL COOLANT SYSTEM 10" 3 JAW HYDRAULIC CHUCK TOOL SETTER PROGRAMMABLE TAILSTOCK SMW OMNIBAR 65FS 14' SMW OMNIBAR 65FS 14' HYDRAULIC BAR FEED W/3 LINERS CHIP CONVEYOR HIMES MACHINERY PHONE- 888-803-2496 WEBSITE- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT ... moreQUOTE http:www.crestcapital.com/himesmachinery
UNITOP 4 Jaw 8" Lathe Chuck w/ D1-4 Adaptor Plate
UNITOP 4 Jaw 8" Lathe Chuck w/ D1-4 Adaptor Plate Independent Jaw Movement 2.2" Through Hole Excellent Condition 34-C
FACEPLATE AND PRATT 4 JAW CHUCK FROM EMCO MAXIMAT 7 METAL LATHE 1 1/2-8 MOUNT
DESCRIPTION: USED, PRATT 5" 4 JAW CHUCK WITH KE Y(MADE IN ENGLAND) AND 5 1/2 DIAMETER FACEPLATE FROM A N EMCO MAXIMAT 7 LATHE. THE MOUNT IS 1 1/2-8. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. ... moreI DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DE
MACHINIST TOOLS LATHE MILL * JACOBS* #2 DRILL CHUCK Morse Taper
UP FOR AUCTION MACHINIST TOOLS& PARTS JACOBS#2 Drill Chuck Morse Taper* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* PLEASE REFER TO ALL PICTURES TO SEE EXACTLLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS· I will combine shipping for more than one purchase. Please look at our other listings. We have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to ... moreconfirm all costs to buyer.
PSI Woodworking - CSC3000C Barracuda Wood Lathe Key Chuck System
PSI Woodworking Lathe Key Chuck System This is a light used system. Limited use with several pieces not even touched. By PSI Woodworking and model CSC3000C. This is a 9 piece system The carry case does have a crack on the bottom but is still usable. Set Includes: Barracuda 2 Key Chuck with#2 Jaws(pre mounted) pre treaded to 1" x 8 TPI) 3/4" x 16 tpi lathe adapter Screw Chuck adapter#1 Step Jaws#3 Round Jaws Pin Jaws T Handle Allen Key Wrench Gear Keyed Wrench Item Details: New/Used: Used Packaging: Original Opened Cosmetic Condition: Scale 1-10 = 9 Auction Includes: Items as pictured. Issues: None. Please see photos for more detailed information Good Luck. And email with any questions. Items we sell range in their original location. Items can be customer returns. Shelf pulls, liquidated, used, and discontinued products. If you have ... moreany questions please just ask. Shipping& Returns: We do our best to ship the same day as payment. 99% of items ship within 24 hrs of payment. We do offer a 14 day money back guarantee. If you decide you do not want the item just request a return within 14 days of recieving and we will refund the purchase price. We DO NOT return shipping cost to or from unless there is a defect of the item not listed. We will refund your money in the event your item is lost during shipping only after 30 days of none tracking. Once 30 days have past from the last scan. The item is considered lost by USPS standards and money will be refunded. Powered by The free listing tool. List your items fast and easy and manage your active items.
ATLAS CRAFTSMAN DUNLAP 109 LATHE KEYLESS DRILL CHUCK #0 TAPER SHANK EXC USED
ATLAS CRAFTSMAN DUNLAP 109 LATHE KEYLESS DRILL CHUCK#0 TAPER SHANK EXC USED Click to Enlarge Click to Enlarge RARE#0 TAPER SHANK CRAFTSMAN KEYLESS DRILL CHUCK FOR CRAFTSMAN DUNLAP 109 METAL LATHES. WORKS SMOOTHLY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Jacobs 30B Drill Chuck For Machinist Lathe Milling Machine Etc
Jacobs 30b drill chuck. Capacity 0-5/16 mount threaded 3/8-24. Runs in/out smoothly. Posted with
Jacobs 7 Drill Chuck Machinist Lathe Milling Machine 1A Jt
Jacobs 7 drill chuck with taper 1A mount. Capacity 0-1/4. Slightly stiff but should loosen up with use and a dab of oil Posted with
0 - 3/8" MT1 JACOBS LATHE TAILSTOCK DRILL CHUCK FOR 618 6" ATLAS CRAFTSMAN LATHE
Original Jacobs No. 41BA drill chuck with key. Chuck is stamped JACOBS 41BA 3/8-24 0-3/8 IN 0-10 MM CAP. Chuck capacity is 0- 3/8" MT1 shank is 2 3/4" long. Includes original Jacobs key. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND ATLAS METAL LATHE 4" 3 JAW CHUCK 64
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ 4" diameter 3 jaw hole is 1 1/2" x 8 tpi no key for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for ... moreyour lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Hardinge Sjogren Lathe Speed Chuck D1-3 D3 Spindle + 2J Collet Set
This is a Hardinge Sjogren lathe collet speed chuck for a D1-3 camlock spindle. Plus a set of 21 Hardinge 2J collets from 1/8" to 1-3/8" by sixteenths. Good used working condition. Buyer pays actual shipping only for a package approximately 10"x10"x12" and 32 lbs. No additional packing or handling charges. I can sell and ship only within the US.
Atlas th54 metal lathe carriage milling face plate chuck attachment.
This is from a atlas th54 f10 metal lathe. It had the face plate attached to it when i bought it. the spindle is 1 1/2 x 8 tpi. Thanks. It is part of a milling attachment. And a home made piece that will hold a face plate chuck. Thanks for looking. Will combine shipping if possible.
Lathe Chuck Key with Two Drift Keys
Lathe Chuck Key with Two Drift Keys Lathe Chuck Key with Two Drift Keys Chuck Key• Chuck Key is a ½ inch L-Handle Drift Key• Drift Key in No. 3• Brand– W&B Drift key shows considerable use. It has wear and hammer marks. Could be smoothed out on a grinder. On has the end broken off and is approximately ¾ inch shorter. Please note: We do our best to give accurate. Detailed photos and descriptions. Although all sales are considered final. If there is an error in our description or a problem with our item, we will issue a full refund of the purchase price if contacted within 3 days after receipt of the item; however, please note that we cannot refund shipping charges. We are happy to answer any questions and always appreciate your business! I am a new seller. If any issues are incurred please give me a chance to rectify any problems ... morefirst. As a first time seller. Positive feedback is important; therefore, if you could please give good feedback comments at completion of sale I would appreciate it. Please email if you have any questions. PayPal payments only accepted. U.S. sales only. No international sales accepted. If insurance is required please give me advance notice prior to final sale. Items are normally shipped with out insurance.
Schaublin 102 W20 Precision Bench Lathe, Tailstock Cross Slide Chuck Headstock
Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 For sale Schaublin 102-80 W20 Precision Bench Lathe. Blue hammertone finish. In good working condition, no play in the headstock, tailstock or quill or cross slide, back lash on the cross and compound is only 0.003mm, Tailstock back lash is almost non existent about 0.0005mm. Comes with a 4 jaw scroll chuck. No motor. Would prefer to sell it as one piece for $1250. Willing to part it out, but only if can line up buyers for all of the parts at once. Parts break down: Headstock- $150(no draw bar) Bed- $100(pick up only. No shipping) Back plate + 4 Jaw Scroll Chuck- $300 Cross/ Compound Slide + Squaring block- $500 Tailstock(MT2) $500. It's too heavy to ship as a unit so I would prefer local pick up or delivery is a possibility within 300- $500 km radius- for extra fee. ... moreI'm in Toronto. As for parts shipment. I have no idea on the costs, I do not profit from shipping, so I will work with the buyer to find a good balance between safe packaging and cheap shipping cost. All sales are final no returns.
Jacobs chuck #3A for lathe drill press 1/8 to 5/8
Jacobs chuck# 3A. Comes with key. Teeth are in good condition. Opens and closes freely. Overall chuck is in good used functional condition with spots. Probably would clean up nice. see pictures. See my other metal lathe tools currently listed on Ebay. Will combine shipping. Thanks for looking. ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e534cdd4e-0xfa-
Lathe 1 1/2"x 10 TPI Spindle Nose Collet Chuck w/ 3 Collets / MR 135
Hello Folks. I could not find the brand name on this Collet Chuck, 1 1/2" x 10 TPI with 7/8" 3/4" and 5/8" collets. No wrench included. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
JACOBS CHUCK 633C 33 Taper Cap.0-1/2~ NICE~ Drill Press? Lathe? Mill?
This is a JACOBS CHUCK 633C 33 Taper Cap.0-1/2~ Drill Press? Lathe? Mill? It is in NICE. Used condition. I found this at a estate/garage sale where they were selling lots of machining tools. Check pictures for condition details. Sold AS Found. AS shown, AS is. This item will be shipped by PRIORITY MEDIUM FLAT RATE BOX. Please email me for International Shipping costs for this item(NO First Class Mail International)
Jacobs 59B Chuck w/Chuck Key Southbend, Atlas Logan headstock Lathe Chuck
The chuck moves freely and the mounting 1/12 X 8 threads are in good condition Ships to continual United States only and I'll offer free shipping with Buy It Now pricing Thanks for looking.
ATLAS 618 CRAFTSMAN 6" LATHE MT 1 COLLET CHUCK 11/64" & 5/16"
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
South Bend Lathe Works No.4209-47 ..... 9" Chuck
You are bidding on the item shown. It works and is in good used condition. P lease see pictures and email me with any questions. See my other auctions; I will combine shipping when possible. If you have a question. Please ask it BEFORE the auction ends! Payment required within 2 days. No local pickup. No buy it now. PayPal only.
CUSHMAN DRILL CHUCK LATHE CENTER
CUSHMAN DRILL CHUCK 60 DEG LATHE CENTER 1" DIA GAGE PAYMENT DUE 24 HRS AT CLOSE OF AUCTION
10" BUCK 4 JAW INDEPENDENT LATHE CHUCK
10" BUCK 4 JAW INDEPENDENT LATHE CHUCK. WITH"L 0" BACK PLATE. CAN BE USED WITH ANY OTHER BACK PLATE. In g ood used and working condition. See pictures. Payment must be received within 3 days from the end of the auction. IF THERE IS A PROBLEM PLEASE GET IN TOUCH WITH ME FIRST SO I CAN TAKE CARE OF IT. International Buyers I will e-mail foreign shipping charges. Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be. I accept PayPal only. NO E-CHECK
ATLAS 618 CRAFTSMAN 6" LATHE JACOBS # 6A DRILL CHUCK MT 1 CAP 0 - 1/2"
LOTS OF AUCTIONS ONLINE NOW! Brand Jacobs Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
MACHINIST'S JACOBS JKP-100 PRECISION KEYLESS 0-3/8 LATHE DRILL CHUCK 1/2" SHANK
GOOD USABLE CONDITION. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE*I AM NOT AN EXPERIENCED MACHINIST AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST AND MAY NEED CLEANING.MAY HAVE SOME PITTING OR LIGHT SURFACE RUST,MAY BE INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,MAY NEED FURTHER METICULOUS CLEANING,MAY NOT BE FULLY ACCURATE AND MAY BE CHIPPED.NEED SHARPENING AND MAY HAVE DUPLICATE SIZES BUT MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE OR A SECOND TOOL TRAY AROUND THE LATHE OR MILL OR FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING AND PLEASE CHECK OUT MY OTHER CUTTING TOOLS,TOOLING,TOOL HOLDING,COLLECTIBLES AND OTHER USABLE STANLEY STARRETT,BROWN& SHARPE,LUFKIN ETC MACHINIST'S TOOLS AND OTHER TRADE TOOLS& ... moreEQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE I'M TRYING TO STAY AWAY FROM A"BUY IT NOW" PRICE BUT IF YOU ARE DETERMINED PLEASE EMAIL YOUR HIGHEST OFFER(PAY PAL ONLY) AND I WILL ANSWER EITHER WAY.THANKS*AS ALWAYS MULTIPLE PURCHASES WILL DECREASE ALREADY LOW SHIPPING COSTS.PLEASE READ BELOW* IF YOU WOULD LIKE TO CARRY OVER A PURCHASE FROM ONE WEEK TO THE NEXT TO SAVE SHIPPING THAT'S FINE BUT I WILL REQUIRE PAYMENT ONLY ON ITEMS PURCHASED WHILE HOLDING TO KEEP MY EBAY UP TO DATE.THANK YOU FOR YOUR UNDERSTANDING* OVERSEAS SHIPMENTS WELCOMED BUT RESTRICTED TO LIGHTWEIGHT AND SMALL ITEMS ONLY. THERE WILL BE AN ADDITIONAL $4.00 HANDLING FEE ADDED TO THE PRE-DETERMINED INTERNATIONAL SHIPPING QUOTE*INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.00(UNDER 4 POUNDS)A MEDIUM FLAT RATE PRIO
ATLAS CRAFTSMAN SOUTH BEND LATHE JACOBS #34 DRILL CHUCK+KEY 0-1/2 CAP #2 MT SHK
ATLAS CRAFTSMAN SOUTH BEND LATHE JACOBS#34 DRILL CHUCK+KEY 0-1/2 CAP#2 MT SHK Click to Enlarge Click to Enlarge FINE USED AND SMOOTH WORKING JACOBS#34 0-1/2 CAPACITY DRILL CHUCK WITH KEY AND#2 MORSE TAPER SHANK FITS 9-12 INCH ATLAS CRAFTSMAN LATHES. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
3 Jaw Lathe Chuck with 10 Threads per inch - Nose Diameter 2.182 inch
3 Jaw Lathe Chuck with 10 Threads per inch- Nose Diameter 2.182 inch 3 Jaw Lathe Chuck with 10 Threads per inch-Nose Diameter 2.182 inch Details• For wood or metal• 5 inch Diameter• 10 Threads per inch- Nose Diameter 2.182 inch• 3 Jaw Scroll Chuck• Manufacture: Union Manufacturing Company• Location: New Britian. CT– USA• Model: 5405-S• Backplate: U676– W320 Sorry. No key available. This is not the correct key for this chuck. I am including a tapered key that could be ground down to fit this chuck with ease. Numerous dint& dings on surface area; however. This does not interfere with the performance of this product. I have personally opened and closed the jaws of the chuck. The scroll and jaws work freely. The jaws close parallel with each other. I find no problems with the operation of this chuck. Please note. That this may be an unusual ... morethread and nose spindle size. A person could make a new backplate if desired. Please note: We do our best to give accurate. Detailed photos and descriptions. Although all sales are considered final. If there is an error in our description or a problem with our item, we will issue a full refund of the purchase price if contacted within 3 days after receipt of the item; however, please note that we cannot refund shipping charges. We are happy to answer any questions and always appreciate your business! I am a new seller. If any issues are incurred please give me a chance to rectify any problems first. As a first time seller. Positive feedback is important; therefore, if you could please give good feedback comments at completion of sale I would appreciate it. Please email if you have any questions. PayPal payments only accepted. U.S. sales only. No international sales accepted. If insurance is required please give me advance notice prior to final sale. Items are normally shipped with out insurance. This item has been packaged double boxed to ensure proper delivery!
Rohm Chuck KFD-130/3 Power Hydraulic CNC Automatic Lathe Mill Milling Router
Not sure if this chuck is new or used. It looks great and I can't tell if it was ever used! Very nice chuck. Thousands of dollars new.
Nikko Precision 3 Jaw Chuck For Tsugami Lathe: (Inv.13178)
Nikko Precision 3 Jaw Chuck For Tsugami Lathe: 6.5 inch diameter power chuck with internal/external jaws. No Drawbar(LocV7ADD) Inv.13178) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to ... morea $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Atlas Craftsman 6” Metal Lathe 5”Chuck Back Plate 1” -10tpi
Normal 0 false false false MicrosoftInternetExplorer4 Atlas Craftsman 6” Metal Lathe 5”Chuck Back Plate 1” 10tpi.
JACOBS SPINDLE NOSE LATHE CHUCK FOR D1-8 SPINDLE
Jacobs Spindle Nose Lathe Chuck for D1-8 Spindle. Model#91-A6 includes one 1-1/8-1-1/4 Jacobs Rubber Flex Collet. Excellent condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e54481318-0x107-
Burnerd lathe chuck, 8" soft jaw, three jaw, scroll, removable top jaw, L00
Burnerd removable jaw chuck L00 mount. 7.5" diameter, ~4.25 deep excluding mounting thread Features: Soft aluminum top jaws Top jaws can be replaced. Renewed, modified as needed Made in England L00 mount Shipping to US only
Fukung Brand 6 1/4" 3 Jaw Chuck w/ Inside and Outside Jaws & Wrench Metal Lathe
The following auction is for a Fukung Brand 6 1/4" 3 Jaw Chuck with Inside and Outside Jaws& Wrench Metal Lathe The chuck is used and it shows some wear. It is in fine used condition. It comes with inside and outside jaws and a chuck wrench, It measures approximately 6 1/4" ac ross. The opening measures approximately 1 7/8" and t he threads per inch TPI is unknown. It is marked F UKUNG BRAND MADE IN CHINA. It is sold as pictured. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 1 3.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International bidders contact me for shipping charge before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any ... morequestions.
See Video - Used 10" Manual Rohm 3-Jaw Lathe Chuck
See Video- Used 10" Manual Rohm 3-Jaw Lathe Chuck Used 10" Manual Rohm 3-Jaw Lathe Chuck. Some dirt and grease but 100% functional. Paypal within 7 days end of auction. I will ship same day. I also accept payment upon pickup if you are local and want to save on the shipping. I ship same day of payment. No sand bagging. I leave it up to my buyers if they want UPS ground or USPS parcel select. I left the corporate world of insurance some time ago to become a full time eBay and Amazon pro seller. I live in Escondido. California with my gorgeous wife and 4 awesome kids. My home is smoke free, but we do have a family dog named Shep. Shep does not like cats, so no cats. I have been in sales for 20 years and treat my customers how I would like to be treated. Since I work from home and have a smart phone, I am easy to contact. Mailing address ... moreis: 2361 Lomica Place. Escondido, CA 92029. Cellphone: 619-787-4906. Ebay Store: http:myworld.ebay.com/craigsconsignment.
SHARS 6" 4 jaw Self Centering Lathe Chuck Solid Jaws
THIS CHUCK HAS BEEN USED A COUPLE OF TIMES.HAS ABOUT 4 HRS ON IT.I BOUGHT IT THIS WINTER AND IT ENDED UP BEING TO BIG FOR MY LATHE, MY LOSS YOUR GAIN.PLEASE EMAIL ME WITH ANY QUESTIONS.I WILL GET BACK TO YOU ASAP Chuck diameter: 6" Thickness: 2.56" Center hole: 1.77" Bolt Circle Diameter: 5.591" Runout: 0.003" Semi-steel chuck body made from high quality cast iron Each pinion is ground and hardened to HRC 43 Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62 OTHER PRODUCTS INCLUDED 2 set of jaws: inside jaw set and outside jaw set 3 piece of mounting screws for the lathe chuck back plate 1 hexagon wrench
BTC 10" Zero Set Adjustable 3 Jaw Lathe Chuck 1103R
BTC 10" Zero Set Adjustable 3 Jaw Lathe Chuck 1103R This is a Zero Set chuck and is adjustable to.0005" T.I.R Comes with the Mounting bolts Semi-steel body Scroll and jaws are high alloy steel Self centering 2 piece reversible jaws 2.810" thru hole Please Email Any Other Questions Thanks
4 Lathe wrenches for a chuck south bend atlas machinest items tool room
You are bidding on 4 chuck wrenches. The ends are square; Diameters are one at 3/8.Two at.280 dia. last one is.300 dia. That size is fron flat to flat. Thanks for looking.
2-5 inch dia Lathe backing plates for a chuck fit 9 inch south bend 1 1/2-8 ?
You are bidding on 2 five inch dia backing plates. If I remember correctly the threads are 1 1/2-8. They do fit a 9 inch southbend lathe. Should fit other lathes. The one on left is.988 thick& the flange is.443 thick. The one on right is 1.310 thick& the flange is.567 thick. Thanks for looking. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e55d6d32a-0x100-
ENCO 3 JAW LATHE CHUCK 6 1/2" DIA. D1-3 MONARCH 10EE ROCKWELL HARDINGE CLAUSING
LOTS OF AUCTIONS ONLINE NOW! Brand Enco Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Enco# 059. D1-3 Mount. 3 Jaw Self Centering. Reversable Jaws. 6 1/2" Dia. 23.12 lbs. Includes Key. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker.
Beautiful Skinner Horton 5-3/4" D. Flat Back 4 Jaw Metal Lathe Chuck
Beautiful Skinner Horton 5-3/4" D. Flat Back 4 Jaw Metal Lathe Chuck, Click to View Image Album Click to View Image Album Click to View Image Album Very unusual 4 jaw chuck in that it has removable top jaws. Condition is excellent but I do not have a chuck key for it. There is no question this is a premium grade 4 J chuck with independent jaw movement. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone ... morebusiness the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the shipping column.
USED 6" Lathe Chuck Backplate 1-1/2"- 8 tpi (for South Bend, Atlas Lathe)
This is a used lathe chuck backplate with 1-1/2" 8tpi threads. The locating diameter in the bore is 1.520" The overall diameter is 6.2" It has 3 tapped holes which look to be 5/16" 18. The plate is about 1/2" thick. Not including the part that's already turned down. Shipping will be $5. 4 5 sent Priority mail in the US only. Thanks for looking.
HARDINGE CATARACT LATHE 4 JAW CHUCK AND 4" DIA. FACE PLATE
LOTS OF AUCTIONS ONLINE NOW! Brand Union& Unknown Packaging None Condition Very Good Quantity Entire Lot Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Union# 9404. 4" Dia. 4.15 lbs. Includes Key. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ATLAS 618 CRAFTSMAN 6" LATHE 3 JAW SCROLL CHUCK 4" DIA. 1" x 8 TPI DELTA
LOTS OF AUCTIONS ONLINE NOW! Brand Craftsman Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Craftsman# 383.22970. 4" Dia. 1" x 8 TPI. 4.14 lbs. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
12 INCH BUCK SCROLL ADJUST-TRU TYPE LATHE CHUCK 3 JAW MODEL B2124R "NICE"
For sale is a very good condition Buck B2124 12” diameter 3 jaw Scroll style chuck. The CHUCK IS"TIGHT" THIS HAS SEEN VERY LITTLE USE. iT IS TOO BIG FOR MY LITTLE 13" sOUTHBEND. SO IT HAS jUST sAT ON THE SHELF. This comes with a set of Jergens hard jaws and a set of Jergens soft jaws as shown. This has an adjust tru type back. Please look at the photos and you will see this is in excellent condition. It comes with the tee handle shown. I CAN bolt it to a piece of plywood in the box for shipping. IF YOU WANT IT PALLETIZED THE WEIGHT WILL GO UP AND THE SIZE WILL INCREASE. i WILL WORK WITH YOU ON SHIPPING. Local pickup is always free. Included Qtyof 1 Buck B2124 chuck Qty of 1 tee handle Qty of 3 Jergens jaws number(and 6 bolts to hold them to chuck) 75330” Qty of 3 Jergens soft Jaws number“15245” Data(APPROXIMATE SIZES FOR REFERENCE) ... moreThrough hole = 3-1/4 Thickness = 4 INCH Adjust tru I.D. = 7-7/8 Mounting bolt circle for 6 ½-13 bolts(not included) = 5-1/4 INCH Thank you
LATHE MYFORD COLLET CHUCK EXCEPTS MARLCO COLLETS
LATHE MYFORD COLLET CHUCK EXCEPTS MARLCO COLLETS These collet chucks came off a Myford lathe with a 28mm 12tpi spindle nose thread. Same as Ml7 I believe but check before buying. They came with Marlco collets that fitted them. The collets are now sold. Sale is for 1 item. One chuck shown in Photo other is basically the same. Buyer must be sure that this will fit the machine they intend to use it on. No returns if brought in error. Overseas please contact for shipping Costs UK mainland postage Price First Class £4.50 On 29-Apr-13 at 14:13:14 BST. Seller added the following information: For delivery quotes of up to 75% off standard rates- try:
Royal 16C CNC Lathe Collet Chuck for A-8 Spindel
Royal CNC Lathe 16C Accu-Length Collet Chuck A-8 Spindle Max RPM 4500 Max Press 24 KN ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3545 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
six lathe chuck or face plate cam lock mounting pins 3/4" -16tpi
buyer gets all 6 013-02-02-76-50 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, ... moreAND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are subject to local sa
JACOBS CHUCK A 4006 STRAIGHT SHANK LATHE CHUCK
TREASURE ATTIC PRESENTS A JACOB HARTFORD STRAIGHT SHANK ARBOR A4006 CHUCK NO KEY(S9) EMAIL ME WITH ANY QUESTIONS AND Check out my other items! THANK YOU ALL SALES ARE FINAL AND ARE AS IS; REFUNDS ARE ONLY AVAILABLE IF STATED IN THE AUCTION. WE CAN ONLY ISSUE A REFUND IF THE ITEM IS OTHER THEN STATED IN THE AUCTION OR AN INCORRECT ITEM WAS SHIPPED. I STRIVE TO DISCLOSE OR DESCRIBE A ITEM AS MUCH AS POSSIBLE SO THAT THERE IS NO MISUNDERSTANDINGS.
Jacobs No 3 Drill Chuck For Lathe Colchester Myford Boxford etc. Used
Jacobs No 3 Drill Chuck For Lathe Colchester Myford Boxford etc. Used Used Jacobs No 3 drill chuck for a lathe such as Colchester Myford Boxford etc. The chuck is stamped“No 3 CAP 17/32” The chuck is 19cm long overall approx and the shank appears to be Morse Taper 2. There is no key with the chuck. The chuck is used and is tarnished however it opens and closes freely. The chuck is heavy at 1.3 Kg before packing hence the high postage cost. Please contact me if you have any questions or require more pictures This item is from a smoke and pet free home. Please contact me if you have any questions or require more pictures. Please note I aim to dispatch within 2 days(typically 1 day) of receiving cleared payment. The actual delivery time will vary according to the postal/delivery service used. I try to use the most cost effective postal service ... morewhich may take a little longer to deliver than first class. Please contact me if you require a different postal service. Overseas bidders please contact me for postage costs before bidding- thanks. I have tried to be accurate and honest with my descriptions. If there is any discrepancy between the item and the description. Please contact me in the first instance. Items returned must be in the same condition as originally sent.
USED LW CHUCK MILLING MACHINE LATHE V-BY VISE AND 61/2" SWIVEL BASE #49970 &71
This listing is for a used heavy duty machinist V-BY vise with 6 1/2" round swivel base. Both vise& swivel base are made by LW Chuck. Overall vise dimensions are 17" long x 5" deep x 9" high overall. It has a 6 1/2" jaw and 4" movement. In good usable condition. Smooth movement and has a professional repair on one corner(see pics) Base measures 6 1/2" in diameter and it's in excellent condition with no repairs. PLEASE NOTE: THIS ITEM IS EXTREMELY HEAVY& SHIPS VIA FEDEX GROUND. OUR RETURN POLICY: IN THE EVENT YOU DETERMINE THIS ITEM WILL NOT WORK AS YOU THOUGHT OR YOU’VE CHANGED YOUR MIND. WE WILL GLADLY REFUND THE ORIGINAL PURCHASE PRICE OF THE ITEM(ORIGINAL SHIPPING WILL NOT BE REFUNDED AND BUYER PAYS RETURN SHIPPING) YOU CAN RETURN THE ITEM BY: CONTACTING US AS SOON AS POSSIBLE(UP TO THE 14 ... moreDAYS ALLOWED IN THE LISTING) EXPLAINING YOUR DESIRE TO RETURN THE ITEM. SHIP WITHIN 3 DAYS OF YOUR NOTICE TO US REGARDING INTENT TO RETURN THE ITEM. PLEASE EMAIL THE TRACKING DATE AND NUMBER IMMEDIATELY(AGAIN. WITHIN THE 3 DAYS OF NOTIFICATION) ITEM SHOULD BE PACKED AND SHIPPED IN THE SAME MANNER IT WAS RECEIVED. WE WILL REFUND YOUR PURCHASE PRICE UPON RECEIPT OF ITEM& CONFIRMATION THAT IT IS IIN THE SAME CONDITION AS WHEN IT WAS SHIPPED.
LOT OF 2 TAPER BT50 LATHE COLLET MILL HOLDER CHUCK TOOLING MILLING CUTTING O4
THIS IS A LOT OF 2 TOOL HOLDERS.I BELIEVE THEY ARE BT50,THEY BOTH SAY THERE LYNDEX JAPAN SOLD AS IS.PLEASE SEE MY OTHER AUCTIONS.
OKUMA CADET CNC LATHE 6,783 CUTTING HOURS L 1420 12" 3-JAW HYD CHUCK CHIP CONV
WE ALWAYS CONSIDER ALL"REASONABLE" OFFERS AND MANY ARE PROMPTLY ACCEPTED! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 You are invited to purchase or"Make Your Best Offer" for a OKUMA CADET L 1420 CNC LATHE with 6.873 CU TTING HOURS, OSP L 700 L CNC CONTROLLER and CHIP CONVEYOR with the following specifications: Specifications: CUTTING HOURS: 6.783- SEE PHOTO Chuck Size: 12” Max Swing Over Bed: 28” Max Swing Over Cross: 18” Center Distance: 26” Max Machining Dia: 14.17” Max Bar Capacity: 2.7” X Axis Travel: 9.05” Z Axis Travel: 25.59” Spindle Speed: 2800 RPM Turret Type: 12 Position Equipped With: OSP 700L Control Chip Conveyor All Available Manuals CONDITION: Machine Appears to be in Very Good Running Condition! Mfg Date: 1998 Location: Northern. Ohio Can be inspected under power This OKUMA ... moreCADET L 1420 CNC LATHE with OSP L 700 L CNC CONTROLLER and CHIP CONVEYOR is known to be in a"Very Good Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee(freight prepaid) if item is not as listed. For items shipped by truck contact any or all of the following for reasonable quotations: Chaun at Next Level Logistics 1-612-237-6843(Excellent Service) We additionally have local riggers that can give reasonable quotations as well as quoting containerizing items for overseas shipments. ALL items we list are offered locally and could be sold previous to end of store listing. We gladly accept Pay Pal in payment for items $150.00 or UNDER ONLY. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal. Company, certified, cashiers checks drawn on recognizable U. S. Banks and accept bank wire transfers. Once payment is received and clears(approx 5 working days for out of state checks. Ect.due to Homeland Security Regulations) the ite
LODGE & SHIPLEY, LATHE, 36" X 300", CHUCK , STEADY REST
LODGE& SHILPEY 36" SWING 300" CENTER DISTANCE L2 SPINDLE MOUNT 24" OVER CROSSLIDE 20 HP MOTOR. WIRED 440 VOLT, BUT IS DUAL VOLTAGE 4 JAW CHUCK STEADY REST WEIGHT 37.000 LBS.
ORIGINAL ATLAS LATHE 6" 3 JAW CHUCK WITH KEY 1 1/2" X 8" TPI
NICE ORIGINAL ATLAS LATHE 6" 3 JAW CHUCK WITH KEY. 1 1/2" X 8" TPI. CHUCK MEASURES 6" ACROSS AND BODY MEASURES 2" IN HEIGHT. JAWS ARE IN NICE CONDITION AS WELL AS SPINDLE THREADS. JAWS MOVE FREELY THROUGHOUT. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
8" 3 jaw metal lathe chuck no back plate
8" 3 jaw metal lathe chuck T. R. Almond MF G CO no back plate This was acquired from a recently closed machine shop The ja ws are tight and move freely should be cleaned and lubricated all sales final. Use shipping calculator for shipping Cost Shipping includes insurance and confirmation Payment must be received within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
Lathe Chuck Jaws Set of 3 # 8620
Lathe Chuck Jaws Set of 3# 8620 3-1/8 Long- 1-3/16 Wide- 2 High Slot.500 Wide- 270 Depth.662 in center between the slots. This item is in used condition and fully functional. This item will ship Flat Rate Priority Mail
General Electric GE Precision Watchmakers Lathe 2S PT1 Machinist Collet Chuck
GE lathe that I cannot find any info whatsoever about. I am guessing that this is a pretty rare little lathe. If you have info or a source for information please help me out I am very intrigued by this little lathe. It takes collets inside the shaft that is part of the motor. It's 220v and I have no way to test it so if it does not run you will just have to take it to a motor shop to have it rebuilt. It could run perfect as the spindle turns smoothly and feels like all the bearings are good. Seems to be a very solid built precision lathe with a heavy duty bed and motor. Posted with
12" 3 Jaw lathe chuck South Bend Atlas Logan Clausing
12" 3 Jaw lathe chuck.works smooth.center of chuck has been hit with cutting tool and has scars but does not effect function of chuck. to cut the cost of shipping it will be disassembled and shipped in two boxes to meet FRB weight limit. Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make ... moreother arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, plea
Kitagawa 8in CNC power lathe chuck w/t-nuts
Well I bought this chuck for a replacement chuck for my Siki lathe because the 8in chuck that was on it locked up and after I bought this one at an auction up in Ohio the one on my Siki started working so now I'm stuck with a chuck I'm not going to use. It's to nice to just sit around my shop so here it is. Thank you for looking. Posted with
KITAGAWA B6 3 JAW CNC LATHE CHUCK
KITAGAWA B6 3 JAW CNC LATHE CHUCK KITAGAWA B6 3 JAW CNC LATHE CHUCK PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
ORIGINAL UNION 4" 3 JAW CHUCK W/ REV JAWS 4 ATLAS CRAFTSMAN LATHE 1 X 10 TPI
Nice original Union 4" 3 Jaw chuck with reversing jaws for an Atlas Craftsman 618 6" 101 metal lathe. Stamped with"U-6-437 MADE IN USA. UNION MFG CO TRADEMARK NEW BRITAIN CONN USA" Jaws move freely throughout range. Comes with set of reversing jaws. Spindle threads are in fine order. the key fits and works properly but does not look to be original to unit. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
BUCK 5" 3 JAW LATHE CHUCK WITH REVERSIBLE JAWS , 1-1/2" x 8 TPI
BUCK 5" 3 JAW LATHE CHUCK WITH REVERSIBLE JAWS. 1-1/2" x 8 TPI. I don't have a key for this but they are readily available from Ebay, MSC or McMaster Carr. Clean and works fine. Please let the pictures help with the description and condition and view my other auctions for more LATHES and TOOLING. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible.
ORIGINAL CRAFTSMAN 6" REVERSING 4 JAW LATHE CHUCK , 1-1/2" x 8 TPI
ORIGINAL CRAFTSMAN 6" REVERSING 4 JAW LATHE CHUCK. 1-1/2" x 8 TPI. It takes an allen wrench to adjust the jaws, not pictured but included. In clean and nice condition. Please let the pictures help with the description and condition and view my other auctions for more LATHES and TOOLING. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible.
10" Kitagawa CNC Lathe Chuck, Type # HOH-10K, Used, WARRANTY
Title: 10" Kitagawa CNC Lathe Chuck. Type# HOH-10K, Used Description: Our Internal Stock# NC-100(4-25-13 dale) You are about to purchase the following item: 1- 10" Kitagawa CNC Lathe Chuck. Type# HOH-10K, Used Catalog# HOH-10K This Chuck is off the following Machine: Mori Seiki SL-3 CNC Turning Center UNIT APPEARS TO BE IN VERY NICE CONDITION. Machine is coming in week of April 29th. Should have in stock ready to ship out by May 3rd. 2013. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE ... moreBIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change a