|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Toledo, United States STEADY REST. 3-1/2". SWING. . 13". SPEED. . 50 TO 1200 RPM. FACE PLATE. 12". SWING OVER CROSS. 9". FEEDS. 00085 TO. 053 IPR.
Buy It Now
Condition: Used Location: Chiefland, United States Cazeneuve machine lathe. Good condition.
Buy It Now
Condition: Used Location: Fort Wayne, United States REPUBLIC // LAGUN. ENGINE & TOOLROOM LATHE. Swing Over Bedways13” (330mm). Swing Over Cross Slide7” (175mm). Swing Through Gap19” (485mm). Width of Bed ... moreAcross Ways9.8” (250mm). Speed Range60~2000. Number of Speeds9.
Buy It Now
Condition: Used Location: Almont, United States DATE OF MFG.: 1988. FULL LENGTH LEAD SCREW THREADING. HOLE THROUGH SPINDLE 1.5". ===================================================. STK#: 104552.
Buy It Now
Condition: Used Location: Pomona, United States Turret Maxi Turn 3" Spindle Thrus Model 1800 Engine Lathe 18" x 60" #6213Swing Over Bed: 18"Swing Over Cross Slide: 14"Distance Between Centers: 60"Spindle ... moreSpeeds (16): 20- 1,600 RPMSpindle Nose: D1- 8Hole Through Spindle: 3"Cross Slide Travel: 10"Feeds: 0.0015- 0.0700 IPRThreads:Inch: 2- 40 TPIMetric: 0.2- 14 MMTailstock Taper: #4 MTTailstock Quill Travel: 6"Motor: 7 1/2 HPDimensions (L x W x H): 120" x 45" x 55"Weight: 5,000 Lbs.Equipped With:3 Jaw ChuckSteady RestTool PostMicrometer Bed StopSplash GuardFoot Brake
Buy It Now
Condition: Used Location: Louisville, United States Nardini-Clausing Engine LatheModel No.: ND 1785ESwing: 17"Distance Between Centers: 85"Thru Hole: 2"Bed Length: 109"Quill Travel: 8"RPM: 25 - 2000Speeds: ... more18Metric/Standard ThreadingO/A Dimensions: 137" x 48"Power: 3 phase 230
Buy It Now
Condition: For parts or not working Location: Louisville, United States Swing over bed: 17". MODEL: REGAL. Distance between centers: 144". THIS MACHINE HAS BEEN IN A STORAGE UNIT FOR APPROX. Number of feed changes: 48. Floor ... morespace: 16 FT x41". Number of spindle speeds: 12.
Buy It Now
Condition: Used Location: Cincinnati, United States HARRISON GEARED HEAD ENGINE LATHE. Swing Over Bed and Saddle Wings: 15.7". Swing In Gap: 23". Spindle Speeds: (16) 25 to 2000 RPM. Thread Dial. Coolant ... morePump (Missing Coolant Tank). MODEL: 15". Distance Between Centers: 50".
Buy It Now
Condition: Used Location: Mesa, United States Equipped with 10 HP, 1000 RPM, 2 CHUCKS, 2" SPINDLE HOLE. 10" & 12" CHUCKS. 30" X 52" 21" SWING, 30" IN GAP.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Motor Power: 0.8 HP (600W). Whether you are a professional craftsman or an amateur artisan, arming yourself with high-precision tools is never a fool's ... moreerrand. It's a perfect, versatile tool for both pros and amateurs and also makes an excellent gift for friends and family who love tinkering and crafting.
Buy It Now
Condition: Used Location: Holland, United States It has a 16" swing with 25-7/8" in the removable gap that is 12" long & 60" centers. Lathe weights in at around 5300 lbs., get us your zip code and we ... morecan get you a freight rate & you must be able to unload it.
Buy It Now
$13.49 Shipping Condition: New Location: HEBDEN BRIDGE, United Kingdom 3 X LATHE CARRIERS / LATHE DOGS. USED ON LATHE WHEN WORKING BETWEEN CENTRES. TOTAL LENGTH IS 4-3/4".
Buy It Now
Condition: Used Location: Waukesha, United States 16" 3 JAW CHUCK. MANUFACTURER.. VICTOR. SPINDLE SPEEDS. . (12) 21 TO 1500 RPM. CHUCK SIZE.. THREADS (ENGLISH). (24) 3.5 TO 26 TPI. MODEL. . 2040.
Buy It Now
Free Shipping Condition: New Location: China Cross Slide Travel: 3" / 75 mm. Cross Slide Travel: 2.6" / 65 mm. Slide Travel: 2.2" / 55 mm. 1 x Center Rest. I hope you can understand and accept our ... moreapproach. Why Choose VEVOR?. Range of Spindle Speeds: 0-1250 / 100-2250 RPM.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States Description Your creativity should not be limited by the equipment. This mini lathe machine is made of high-quality aluminum and plastic. Its excellent ... morehardness makes it easy to work with various stubborn metals, allowing you to get the shape you want. Compared to other devices, it is very mini in order for you to be able to use it more easily. What's more, you don't need to worry about not being able to handle it, because we have a detailed manual to guide you through the operation. Specification 🛑Material: Aluminum and Plastic 🛑 Color: Red + Black 🛑 Motor Speed: 12000rpm/min 🛑 Input Voltage: 12VDC 🛑 Input Current: 2A 🛑 Input Power: 24W 🛑 Voltage: 110-220v, 50-60Hz 🛑 Plug Type: US 🛑 Diameter of Processing Material: Max. 45mm/1.77in.
Buy It Now
$11.16 Shipping Condition: Used Location: Los Angeles, United States With its precision engineering and durable construction, it can handle all your CNC needs.
Buy It Now
Condition: Used Location: Chico, United States It was set outside only for the photos. Spindle Speed Range (12)…………………………………………………. 11 to 450 RPM. Hole Thru Spindle………………………………………………………………………………… 2”. ... moreThread Range …………………………………………………………………. ½ to 28 T.P.I.
Buy It Now
Condition: Used Location: Holland, United States No mystery here you can watch the video and decide for yourself. Don't be afraid at the low price. Centers: 157". Gap Swing: 35". RPM: 31.5-1250. Video ... morewill open in a new window. We want you to feel comfortable buying from us.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States Boring, Turning & Facing Tool Holder, fits tool bit up to 1/2" and round shank tooling up to 1/2". Knurling and Turning Tool Holder.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Swing In Gap 31-3/8". Gap Width 10-5/8". Swing Over Bed 22". Coolant Pump Motor 1/8 HP. Distance Between Centers 60". No of Feeds 16. Swing Over Cross ... moreSlide 13". 12" 6-Jaw Chuck.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States New ER40 collet chuck with 12 piece collet set, collet wrench and 1-1/2" -8 spindle mount backing plate. Fits Atlas / Craftsman 9" thru 12" lathes with ... more1-1/2" -8 spindle. Collet sizes - 1/8", 3/16", 1/4", 5/16", 3/8"; 7/16", 1/2", 5/8", 3/4", 7/8", 1", 1-1/16" & 1-1/8".
Buy It Now
Condition: Used Location: Pomona, United States COOLANT TANK AND PUMP - BUILT INTO LATHE. DISTANCE BETWEEN CENTERS: 108". SWING OVER BED: 25". OVERALL BED LENGTH: 130". NUMBER OF SPEEDS: 24 SPEED GEAR ... moreBOX WITH 20 HP MAIN DRIVE MOTOR. WEIGHT: 20,000 LBS.
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States South Bend Lathe 14-1/2" & 16" Cross Slide Screw Feed Nut PT65FH1 for 1940(ish) and newer machines. South Bend Part Number PT65FH1. You are sending money ... moreto them!
Buy It Now
Condition: Used Location: Louisville, United States
Buy It Now
Condition: Used Location: Elk Grove Village, United States Available for your inspection under power and purchase at our JV Partners Warehouse in Cincinnati. Ohio is this"ABSOLUTELY BEAUTIFUL" Summit ... moreModel 19-4. 17" 27" swing X 80" cc Geared Head Engine Lathe. We have run this machine through all speeds and feeds and find it to be in Absolutely Excellent Operating and Cosmetic Condition. Further. It is equipped with a very desirable 4 1/8" Spindle Hole, Inch and Metric Threading. The motor is 7 1/2 HP/230V/460V/3PH/60CYC. These Summit Engine Lathes are Excellent Engine Lathes Built With a Lot of Quality in Oklahoma. USA. Specifications are as follows: Manufacturer: Summit SUMMIT GAP BED ENGINE LATHE MODEL: 19-4 X 80 SERIAL NUMBER: 8523 Year: 1997 GENERAL SPECIFICATIONS Swing Over Bed: 19" Swing Over Cross Slide: 10-3/4" Swing Over Gap: 27" Length of Gap: 15-3/8" Distance Between Centers: 80" Spindle Speeds: 12) 22 to 1500 RPM Spindle Nose: D1-8 Cam Lock Spindle Hole: 4-1/8" THREAD AND FEED RANGE Threads Per Inch-Number/Range: 56) 3/4 to 92 Metric Threads-Number/Range: 35) 25 to 23 Module Threads-Number/Range: 26) 25 to 11.5 Diametral Pitch-Number/Range: 56) 1.5 to 184 Long. Feeds-Number/Range: 56) 0010 to.129 Cross Feeds-Number/Range: 56) 0004 to.056 Metric Feeds-Number/Range: 56) 0235 to 2.84 Leadscrew(Diameter and T.P.I. 1-3/8 to 4 T.P.I. EQUIPPED WITH 7-1/2 HP Motor Taper Attachment 12" 3-Jaw Chuck Thread Dial Steady Rest Approximate Weight: 6800 Lbs. Approximate Shipping Dimensions: 144" x 46" x 60"H F.O.B. Cincinnati. Ohio 45223 ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER We believe the new owner of this Summit Model 19-4 Geared Head Engine Lathe will be very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all. Ou
Buy It Now
Condition: Used Location: Howell, United States Face plate adapter. Coolant pump needs replacing. Very Nice Condition. R eturn Po licy. 91"Lx30"Wx70"H. 3 Jaw chuck. Heavy cast base.
Buy It Now
Condition: Used Location: Cedarburg, United States Cazanueve 28" x 60" Geared Head Heavy Duty Engine Lathe - Similar to Monarch. Model #: HB725. Swing: 28". Motor: 13.2 KW, 220/440V, 3 ph, 50/60 Hz. Centers: ... more60". 18" 3-jaw Chuck. WE'LL DO OUR VERY BEST TO MAKE IT SO!
Buy It Now
Condition: Used Location: Houston, United States 30hp motor, 4-428 rpm, 31" x 120", 4 jaw chuck. Swing over cross slide.24”. Swing over bed.. Swing over gap.. Spindle nose..A2-15.
Buy It Now
Free Shipping Condition: New Location: United States Description Your creativity should not be limited by the equipment. This mini lathe machine is made of high-quality aluminum and plastic. Its excellent ... morehardness makes it easy to work with various stubborn metals, allowing you to get the shape you want. Compared to other devices, it is very mini in order for you to be able to use it more easily. What's more, you don't need to worry about not being able to handle it, because we have a detailed manual to guide you through the operation. Specification ??Material: Aluminum and Plastic ?? Color: Red + Black ?? Motor Speed: 12000rpm/min ?? Input Voltage: 12VDC ?? Input Current: 2A ?? Input Power: 24W ?? Voltage: 110-220v, 50-60Hz ?? Plug Type: US ?? Diameter of Processing Material: Max. 45mm/1.77in.
Buy It Now
Free Shipping Condition: New Location: New York, United States Overall length : 442mm (17-1/2"). Shank Size : Morse Taper 5 M20 TAPPED END ON MORSE TAPER 5 SIDE.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Why Choose VEVOR?. 2500 RPM (Model Upgrade & Version A) /2250 RPM (Model Version B) & 550W DC Single Phase & High Efficiency. 550W Powerful Motor. Power ... moreof Motor: 550W DC Single Phase. The precision lathe mill machine features a powerful motor.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Your creativity should not be limited by the equipment. This mini lathe machine is made of high-quality aluminum and plastic. Its excellent ... morehardness makes it easy to work with various stubborn metals, allowing you to get the shape you want. Compared to other devices, it is very mini in order for you to be able to use it more easily. What's more, you don't need to worry about not being able to handle it, because we have a detailed manual to guide you through the operation. Specification ??Material: Aluminum and Plastic ?? Color: Red + Black ?? Motor Speed: 12000rpm/min ?? Input Voltage: 12VDC ?? Input Current: 2A ?? Input Power: 24W ?? Voltage: 110-220v, 50-60Hz ?? Plug Type: US ?? Diameter of Processing Material: Max. 45mm/1.77in.
Buy It Now
$88.39 Shipping Condition: Used Location: Everett, United States Designed and made in the USSR. The main characteristics of the lathe 1d601. It allows you to create intricate designs, threads, and contours with ease. ... moreVersatile Chuck: The lathe features a versatile chuck that securely holds the workpiece in place.
Buy It Now
$90.60 Shipping Condition: Used Location: Sparta, United States Preowned 19" x 60"cc STANDARD MODERN Engine Lathe. Model: Series 4000, S/N 7713(New 1974) Maximum swing over bed ways and saddle wings Swing ... moreover cross slide Distance between centers Cross slide travel Compound slide travel Bed width Hole through spindle Spindle nose. Camlock, size(24) Spindle speeds. In 3 ranges Feeds. Longitudinal and cross(60) Thread range Tailstock quill diameter Tailstock quill travel Taper in tailstock quill 20" 12" 60" 12" 5" 14" 3-1/16" D1-8 20-1.200 R.P.M. 0016 to.100 I.P.R. 2 to 120 T.P.I. 2-5/16" 8" 5 Morse Equipped With Induction hardened bed ways 17" Diameter four-jaw chuck with reversible jaws 12" Diameter BISON three-jaw chuck with removable and reversible top jaws 9" Diameter capacity three-point roller-type steady rest Trav-A-Dial mechanical readout for carriage travel Complete set of change gears(127. 80, 70, 60, 55, 50, 45 teeth) for achieving metric thread range of.1125 to 8 mm Threading dial(1) Plain center for tailstock Chuck guard Work light Removable chip pan Coolant system with 1/4 H.P. pump motor 15-10 H.P. 3/60/460 volt 1.740-1,165 R.P.M. two speed spindle drive motor and electrical controls Approximate Weight: 4.900 Lbs. Approximate Dimensions: 118" L-R x 44" F-B x 57" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
Buy It Now
Condition: Used Location: Glassboro, United States Small orders are no problem. ITEM TITLE. Location: MS. Your Best Work Starts Here™. Be sure to add us to yourfavorites list !
Buy It Now
Condition: Used Location: Tallmadge, United States (Ikegal Model A-20 Engine Lathe w/ Manual and Important Drawings Included. The reason for this is that they must transfer your item onto another smaller ... moretruck or a truck with a lift gate. Solution 1.).
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States New 4" 3 jaw self centering import lathe chuck with 1"-10 spindle mount backing plate.
Buy It Now
Condition: Used Location: Pulaski, United States Please Refer To Machine# 944953 LeBlond Engine Lathe Regal L3000 Lathes- Engine Chuck Size 3& 4 Jaw. Max Swing Over Bed 15" Swing Over Cross ... moreSlide 9" Max Center Distance 54" Manufacturer LeBlond Engine Lathe. Model No. Regal. Serial No. 6C 1494. Year Mfg. 1966. Spindle Speeds 60-2400 RPM Servo-Shift. Hole Through Spindle 1-17/32" Spindle Nose D-1-8 Camlock. Tailstock Taper#4 MT. Features/Accessories 3& 4 J Chucks. 2) Face Plates, Steady Rest, Dog Plate, Micrometer Carriage Stop, Chip Pan. FOB Point Elk Rv MN.
Buy It Now
Free Shipping Condition: New Location: Vishnu Garden S.O, India REVOLVING LIVE CENTER MT-3. High Quality Ball Bearings & Taper Bearing Absorbs Combined Radial & Thrusts Load. Situated at the industrial hub of INDIA ... morewe specialize in providing complete tooling solutions.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Shank is 2MT -Hard & Precisely Ground 4. Die Holders are interchangeable & Can hold Die sizes of 13/16", 1", 1-5/16" & 1-1/2". 2MT Die Holder with 50 ... moremm 3 Jaw Self Centering Chuck Shank is 2MT -Hard & Precisely Ground 4/.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States Fits Atlas / Craftsman 9" thru 12" lathes. New 5" 3 jaw self-centering import lathe chuck with 1-1/2" -8 spindle mount backing plate.
Buy It Now
Condition: Used Location: Louisville, United States Equipped With SPINDLE NOSE: D-8 CAM LOCK. SPINDLE DRIVE: 15/10HP. RAPID TRAVERSE RATES (X/Z): 118/236 IPM.
Buy It Now
Condition: Used Location: Cincinnati, United States 20" x 48" IKEGAI "A20" HIGH-SPEED ENGINE LATHE - #30024. Swing Over Bed Ways, Rated 20". Swing Over Bed Ways, Actual 21". Swing Over Cross-Slide 11.375". ... more(13) Spindle Speeds, Range 18 to 2000 RPM. U.S. Thread Changes, Range 1-18" to 80 TPI.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States LATHE VERTICAL MILLING SLIDE - FIXED BASE 4" X 5" WITH 2" SELF CENTERING VICE. Vice Jaw Opening : 2"(50mm). Vice Jaw Width : 2"(50mm). Vice Jaw Depth ... more: 1" (25mm). Vice Height : 2-3/8" (60mm). Allows self centering for accurate centering of jobs automatically.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Motor Power: 0.8 HP (600W). Whether you are a professional craftsman or an amateur artisan, arming yourself with high-precision tools is never a fool's ... moreerrand. It's a perfect, versatile tool for both pros and amateurs and also makes an excellent gift for friends and family who love tinkering and crafting.
Buy It Now
Condition: Used Location: Cincinnati, United States 24/35" x 80" LANSING GAP-TYPE ENGINE LATHE. Swing thru Gap 35". Gap Length 12.5". Spindle Nose D1-8"1. Main Motor, Horsepower 20 HP. Whitworth Thread ... moreChanges, Range. 25 to 60 TPI. Module Thread Changes, Range. 25 to 3.75.
Buy It Now
Condition: Used Location: Chico, United States SPINDLE RANGE: 13 – 849 RPM. ELECTRICS: 220 VOLTS, 3 PH, 60 CYC. DISTANCE BETWEEN CENTERS: 30”. SWING OVER CROSS SLIDE: 10”. NUMBER OF SPINDLE SPEEDS: ... more24. TRAVEL OF TOOL SLIDE: 4-3/4”. WIDTH OF TOOL SLIDE: 6-1/8”.
Buy It Now
Condition: Used Location: Brookpark, United States TARNOW #TUJ50 22" X 120" LATHE. TARNOW #TUJ50 22\" X 122\" LATHE. -- Steady rest. -- 32" SWING IN GAP. -- 22" FACE PLATE. Video will open in a new window. ... more-- 18" 4 JAW, 12" 3 JAW, 15" 4 JAW. -- 18" CHUCK.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States Hendey changed their design several times so please make sure this will work with your lathe. I would be happy to take more measurements or add photos. ... more“Free Returns” free returns mean I pay for return shipping. You will still loose out on the original cost. I only say that because many think it’s a good idea to buy and if it doesn’t fit they can just send it back.. you can but you will loose some money Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter how big or small your contribution is. THANK YOU
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature?? Convert a 3/4" x 10tpi lathe headstock spindle to 1" x 8tpi Allows a 3/4" x 10tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, ... moreand other woodturning tools and accessories Made of steel; Weighs .85 pounds; Extends spindle length approximately 1-1/2" Flats allow for solid wrench tool grip for tightening and loosening from spindle Wrench not included Specification?? Made of steel; Weighs .64pounds; Extends spindle length approximately 1-1/2" Internal thread : 3/4" x 10TPI External thread : 1" x 8 TPI Flats allow for solid wrench tool grip for tightening and loosening from spindle Wrench not included.
Buy It Now
Condition: Used Location: Cincinnati, United States Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 14" Swg 126" cc Monarch 14C ENGINE LATHE. Taper, 3-Jaw, Sony DRO, Steady Rest,Th Ref# 148014 iammdna XLATHE 14 x 126" MONARCH ENGINE LATHE MODEL: 14C. S/N: 28005, NEW: 1945 SPECIFICATIONS: ACTUAL SWING OVER BED. 16-1/2" SWING OVER CROSS SLIDE. 9" DISTANCE BETWEEN CENTERS. 126" WIDTH OF BED. 14-3/4" SPINDLE NOSE. D1-6" CAMLOCK HOLE THRU SPINDLE. 1-9/16" SPINDLE SPEED RANGE(16) 17- 700 RPM LONGITUDINAL FEED RANGE(60) 0028" 1683" IPR CROSS FEEDS HALF THE VALUES OF LONGITUDINAL THREADING RANGE ENGLISH(60) 2- 120 TPI TAILSTOCK SPINDLE TRAVEL. 6" TAILSTOCK SPINDLE TAPER. 4 MT APPROXIMATE WEIGHT. 8.500 LBS APPROXIMATE DIMENSIONS. 192"L x 48"W EQUIPPED WITH: SONY TWO AXIS DIGITAL READOUT TAPER TURNING ATTACHMENT 10" 3-JAW CHUCK ALORIS QUICK CHANGE TOOLPOST WITH HOLDERS JACOBS 3/4" CAPACITY DRILL CHUCK FOR TAILSTOCK LIVE CENTER FOR TAILSTOCK STEADY REST THREAD DIAL INDICATOR WORKLIGHT COOLANT SYSTEM 7.5 HORSE POWER MAIN MOTOR INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More Monarch Machines Click Here For More Toolroom Machines- ENGINE LATHES(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our rec
Buy It Now
Condition: Used Location: Pulaski, United States TOS Geared-Head Precision Heavy Duty Engine Lathe. Center Distance: 132". Capacity 28" Swing. Swing Over Cross Slide: 15". 16" Roller Type Steady Rest. ... moreModel: SU63A. 15" 4-Jaw Chuck. We will load on a flatbed trailer unless otherwise noted.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States These are not for the 6" lathe (618 lathe). The reverse tumbler are often the most worn gears on your lathe. Update your lathe with a new set. This item ... moreis one pair of reverse tumbler gears for 10 or 12" Atlas/Craftsman lathe.
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States NEW FACTORY OEM ATLAS CRAFTSMAN 10-12 LATHE 10F-11 TRAVERSE GEAR CASE NEW PART Click to Enlarge Click to Enlarge NEW FACTORY OEM PART ATLAS CRAFTSMAN ... more10-12 INCH LATHE 10F-11 TRAVERSE GEAR CASE. FOR LATHES WITH 3/4 LEADSCREWS AND POWER CROSSFEED.THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
Condition: Used Location: Harrison, United States MODEL: C1440S, S/N:48492, NEW: 2004. SPINDLE BORE. . 1-5/8". SPINDLE NOSE, CAMLOCK, SIZE. D1-5. SPINDLE SPEED RANGE(18). . 30 - 2,000 RPM. STEADY REST.
Buy It Now
$18.40 Shipping Condition: New Location: Berrien Springs, United States Easy to read graduated plate with taper per foot and degrees.
Buy It Now
Condition: Used Location: Cincinnati, United States 19" x 78" LEBLOND-MAKINO "REGAL" ENGINE LATHE w/DIGITAL READOUTS. Cross-Slide Cross Feed w/o Taper. . . . . 11-1/4". Serial No. 11E458, Model 19" REGAL. ... moreDistance Between Centers. . . . . 78".
Buy It Now
Condition: Used Location: Tuscaloosa, United States
Buy It Now
Free Shipping Condition: New Location: New York, United States Morse taper 5 shank | Overall length of the bar : 442mm. Premium Lathe test mandrels from PRAZTECH.
Buy It Now
$19.95 Shipping Condition: New – Open box Location: Hampton, United States This Sandvik Coromant SVHBL 16 3D toolholder is a reliable and high-quality solution for your lathe needs. Made in Sweden, this unit is designed to provide ... morelong-lasting support for your metalworking projects. With its sturdy shank and precision engineering, this toolholder is a great investment for any CNC, metalworking, or manufacturing operation. Whether you're working with custom materials or standard metals, the Sandvik Coromant SVHBL 16 3D is sure to deliver the performance and reliability you need to get the job done right.
|
|
|
|
GENUINE ALORIS CA 5 QUICK CHANGE LATHE - 3 MT DRILL HOLDER engine metal tool Q/C
good used quick change tool holder- CA size ALORIS CA 5 3 MT drill holder will have name scribed on it please check my other auctions and happy bidding! FREE FAST FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WHACHEON 15" X 40TOOL ROOM LATHE ENGINE LATHE SOUTHBEND NARDINI LEBLOND CLAUSING
HERE IS A NICE RUNNIG 15-3/4" X 40" WHACHEON ENGINE LATHE. THIS LATHE CAN BE INSPECTED UNDER POWERIN MPLS MN. TO SET UP AN INSPECTION. PLEASE CALL JIM@ 952-931-7974. THANK YOU. NOTE TO BUYER: THERE WILL BE A NEW 2 AXIS DIGITAL READ OUT INSTALLED PRIOR TO SHIPMENT. GENERAL SPECIFICATIONS: MAKE: WHACHEON MODEL: 15-3/4" X 40' 1. Used) Whacheon Engine Lathe Model: 15 3/4 X 40 Year: 11- 85 Specifications: Swing.over ways)15.75" Center Distance.40" Spindle Speeds.50- 1850 RPM Equipped With: Inch Threading Tailstock 10" 3) Jaw Chuck Model: 15 3/4 X 40 Auto Oiler Thread Dial All Available Manuals PRICE.$7500.00 LOADED ON YOUR TRUCK
|
|
|
CLEAN!! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE - #LC-1340G
aims CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Acra Turn. This is a used Geared Head Gap Bed Engine Lathe in EXCELLENT condition. Model# LC-1340G Serial# 1206 Features: Geared Headstock. Induction Hardened Bedways. Gap Bed. 6" Three Jaw Chuck. 8" Four Jaw Chuck. Phase II Quick Change Tool Post& Holders. Steady Rest. Follow Rest. 8" Fixture Plate. 12" Face Plate. Coolant System. 220 Volt. Single Phase. Inch& Metric Threads. Specifications: Swing: Swing Over Bed: 13" Swing Over Cross Slide: 8" Swing Over Compound Slide: 3" Swing Over Gap: 17" Capacities: Distance from Floor to Center: 42" Distance Between Centers: ... more40" Spindle: Mount: D1-5 Spindle Bore: 1.49" Number of Spindle Speeds: 18 Range of Spindle Speeds: 60 to 2.000 rpm. Threads: Inch Threads: 4.75 to 72 tpi Metric Threads: 0.25 to 9 mm Module Threads: 0.25 to 3.5 Diametral Threads: 11 to 108. Carriage: Cross Slide Travel: 7" Compound Rest Travel: 3-1/4" Tailstock: Spindle Travel: 4" Taper of Center: 3 Morse Taper Spindle Diameter: 1-9/16" Bed: Width of Bed Face: 7-3/8" Length of Bed: 50-3/4" with 7-1/4" gap. General: Motor: 2 Horsepower. 110/ 220 Volt, 1,700 rpm, 25/ 12.5 Amp, 60 Hz Electrical: 110/ 220 Volt. Single Phase(Currently wired@ 220 Volt, Single Phase) Overall Dimensions: 72" x 30" x 50" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G C
|
|
|
sunnen machinist tool cylinder hone bore cnc engine rebuilding lathe mill mech.
commercial cylinder engine hone in good shape 4 piece in original box made for and by sunnen
|
|
|
LEBLOND REGAL 15"X30" GEARED-HEAD ENGINE LATHE W/ TOOLS
LeBlond Regal 15"x 30" Geared-Head Engine Lathe Description: In absolute excellent condition in& out. This is a geared head machine and much more desireable than the servo-shift machine which is known for its"hard to fix" issues. Spindle runs quiet and the ways are in excellent condition as well. Comes loaded with the tooling listed below including a 3-jaw& 4-jaw chuck. Coolant system and much more. The machine is newly painted with a special 2-part poly urethane paint guaranteed to last. This was no slouch paint job! Everything on this machine is in 100% working condition and it comes loaded with all the bells and whistles outlined below. Check out our feedback& bid with confidence! Check out the short video below of the machine under power: Leblond Regal 15" X 30" Geared Head Engine Lathe Manufacturer: ... moreLeBlond Model: Regal 15 S/N: 3C572 Year: 1975 Specifications: Swing over bed 15.5" Swing over cross slide 9.5" Distance between centers 30" Spindle Speeds 30-1200 rpm Spindle Bore 1.5" Headstock& Tailstock spindle center taper MT3 Spindle nose L-0(48) Feed Changes Long.0018-104 i.p.r(48) American Standard Threads 4-224 T.P.I Spindle Motor 5HP 3/60/208-220-440 Equipped With: Geared Head Cushman 8" 3-Jaw Chuck Buck 10" 4-Jaw Chuck KDK Toolpost Coolant System Jacobs Drill Chuck Dead Center Chuck Wrenches Coolant/Chip Tray Push Button Top Mounted electrical New 2-Part Polyurethane Paint The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and c
|
|
|
Sidney 16"x 55" Manual Engine Lathe
DESCRIPTION Sidney 16"x 55" Manual Engine Lathe Manufacturer: Sidney Model: Year: 1943 Condition: Used Specifications: Size 16" Between Centers 55" Thru-Hole 1-3/4" Spindle Speeds 14-534 RPM Chuck 12" For more information contact Carlton Carr at(843) 845-7433 We will also ship anywhere via your freight handler or carrier and remove shipping fees. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. ... moreWhen requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.wardatessindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnoratessindustrial.com. Mac DB: 4121-1397-BD
|
|
|
Graziano Sag 508 Engine Lathe
Graziano Sag 508 Engine Lathe Specifications: Swing over bed 20” Swing over cross slide 12” Swing over gap 28” Distance between centers 80” Spindle speeds(12) 26- 1300 RPM Spindle bore 2-1/2” Threading.English(39) 3- 46. Metric(26) 0.375- 5.75. Module(18) 0.0375- 2.875. Diametral(40) 6- 92 Inch feeds(40) 0.00186- 0.02854 Metric feeds(40) 0.00118- 0.01968 Leadscrew diameter 1-1/2” Leadscrew pitch 2 TPI Approximate overall dimensions 139”LR x 48”FB x 51”H Approximate weight 6.500 lbs If you have any question. Please contact Brayton Dennis at 253-830-4722 or email me at CapitalEquipmentInc@hotmail.com Shipping: Buyer is responsible for freight arrangements and costs All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final If needed. There will be a $125 loading fee ... morefor large freight items Small items are shipped via UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours after funds have been approved. If you have any questions. Please contact me. Powered by The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
NICE!! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE - #610
aims NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by The Monarch Machine Tool Co. of Sidney. Ohio. This is a Geared Head Engine Lathe in GREAT condition. Model# 610 Serial# 47118 Features: Cushman 15" Three Jaw Chuck. Taper Attachment. Flame-Hardened Bed-Ways. Specifications: Swing: Swing Over Bed: 16" Swing Over Cross Slide: 10" Swing Over Compound Slide: 4" Capacities: Distance from Floor to Center: 42-1/2" Distance Between Centers: 54" Spindle: Mount: D1-6 Spindle Bore: 2" Number of Spindle Speeds: 36 Range of Spindle Speeds: 12 to 1.500 rpm. Threads: Inch Threads: 2 to 120 tpi. Carriage: Cross Slide Travel: 9" Compound Rest Travel: 3-1/2" Tailstock: Spindle ... moreTravel: 5-3/4" Taper of Center: 4 Morse Taper Spindle Diameter: 4" Bed: Width of Bed Face: 13-1/2" Length of Bed: 92" General: Electrical: 440 Volt. Three Phase Overall Dimensions: 128" x 58" x 54" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54" GEARED HEAD ENGINE LATHE- 610 NICE! MONARCH 16" x 54&
|
|
|
Engine Lathe Tailstck Crotch Center for Drilling on the Lathe using the Tailstoc
The item for sale is a Crotch Center. This came with a Clausing lathe as original equipment. Clausing part# 356. I included a picture of the description from the Clausing manual. The center has a#2 Morse taper. Center has some surface rust. Sold as is no returns. This crotch center goes in the tailstock and the drill is placed in the headstock. The part to be drilled locates in the"V" in the crotch block and is drilled. Shipping is $10.00 anywhere in the continental US. I do ship to Canada. I do combine shipping when possible. Thanks for looking and good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f172087d5-0x106-
|
|
|
ENGINE LATHE THREADING TOOL HOLDER metal hss bit WILLIAMS USA No. 53
good used lathe tool holder- threading marked Williams No. No. 53 shank is approx 3/4" x 1 5/8" x 8" will ship for $5.80anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ENGINE LATHE TURNING TOOL HOLDER metal 1/2" hss bit ARMSTRONG USA No. 4-S
good used lathe tool holder- turning marked Armstrong No. No. 4-S shank is approx 3/4" x 1 5/8" x 9" 1/2" hss bit will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ENGINE LATHE or METAL SHAPER PARTING TOOL HOLDER hss cutoff blade WILLIAMS USA
good used lathe or shaper tool holder- parting Williams USA No. 33-L shank is approx 3/4" x 1 5/8" x 8 1/2" new blade- Somma Tool Co. 3/16 x 7/8 these are a handy slotting tool for a metal shaper will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Engine Lathe South Bend 10 X 24"
This pretty little South Bend Lathe runs on 110 Volts and wired to plug into a standard receptacle. It features a DC spindle motor and Drive so that you are able to get a pretty good response running this unit with 110 volts. There are different range selections in running the unit as well. We stock plenty of tooling if you need to purchase some. It does come with the current chuck installed.
|
|
|
Engine Lathe Monarch Model 10 EE
MONARCH 10 EE TOOL ROOM LATHE CAPACITY 10 X 20 UPDATED ELECTRICS AND NEW MITSUBISHI DRIVE READOUT AND LINEAR GLASS SCALES RUNS NICE AND QUIT WEIGHT APPROX 4500 LBS
|
|
|
MONARCH 53.5" X 228" MONSTER ENGINE LATHE. 40HP
Monarch 53.5" x 228" Engine Lathe Description: In absolute excellent condition in& out. This machine is a"USA MADE MONSTER" 46" 3-Jaw& 4-jaw chuck. Rapid Carriage travel, 40HP Spindle Motor and much more. Everything on this machine is in 100% working condition and it comes loaded with all the bells and whistles outlined below. Check out our feedback& bid with confidence! Check out the short video below of the machine under power: Monarch 30NN 50"x228" Geared Head Lathe Manufacturer: Monarch Model: 36NN S/N: 18517 Year: 1947 Specifications: Swing 53.5" Distance Between Centers 228" Spindle Speeds(16) 6-303 rpm Inch Threading.006-332 TPI Main Motor 40HP Dimensions 338"L x 80"W x 84"H Spindle Bore 2" Machine weight 36.000 lbs Equipped With: Taper Attachment 36" ... more4-Jaw Chuck 24" 3-Jaw Chuck Tailstock(2) Steady Rests Rapid Carriage Traverse Inch Threading Live Center The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Any taxes shall be paid by the buyer in addition to the quoted purchase price. DELIVERY DATES: While every effort will be made to meet quoted or verbal delivery dates. Those dates are estimated target dates only. Date of delivery is not guaranteed as those delivery dates are necessarily subject to fire, strikes, or labor trouble, storms, acts o
|
|
|
14" x 40" REPUBLIC TOOLMASTER MODEL T-12 ENGINE LATHE
14" x 40" REPUBLIC TOOLMASTER MODEL T-12 ENGINE LATHE.WELL TOOLED Specifications: Swing Over Bed.14" Swing Over Cross Slide.9" Distance Between Centers.40" Spindle Bore.1-1/2" Spindle Speeds.12) 25- 2.000 RPM. Threading.IN/MM. Main Motor.4 HP. 220/440v, 3Ph. Equipped With: Chuck. Collet Closer. KDK Tool Holder. Tailstock.
|
|
|
28” X 98” HANKOOK PROTEC-28 GEARED HEAD GAP BED ENGINE LATHE - HOLE THRU 4-1/8”
28” X 98” HANKOOK HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE- 4-1/8” SPINDLE HOLE YEAR- 1989/ MODEL PROTEC-28 SWING OVER BED: 28” SWING OVER CARRIAGE: 18-7/8” SWING OVER GAP: 37-3/4” LENGTH OF GAP IN FRONT OF FACE PLATE: 10-5/8″ CENTER DISTANCE: 98″ HOLE THROUGH SPINDLE: 4-1/8” TAPER OF SPINDLE HOLE: METRIC TAPER#120, SPINDLE NOSE: D-1-11, NUMBER OF SPINDLE SPEEDS: 12, SPINDLE SPEED RANGE: 28– 1.250 RPM, TAPER OF SPINDLE CENTER: MT#6, MAXIMUM TRAVERSE OF CROSS SLIDE: 19-7/8” MAXIMUM TRAVERSE OF UPPER SLIDE: 7-7/8” SIZE OF BITE HOLDER: 1-1/4” X 1-1/4” TYPE OF TOOLPOST: T-SLOT TYPE, LONGITUDINAL FEED RANGE(48) 0012 TO.0644 IPR, CROSS FEED RANGE(48) 0006 TO.0322 IPR, METRIC FEED RANGE(27) 05 TO 14 MM/PITCH, INCH THREADS(40) 2– 56 TPI, MODULE THREADS(21) 25– 7, DP THREADS(35) 4 TO 112 TPI, LEAD SCREW(DIA X PITCH) 1-3/4” X 4 TPI, DIAMETER OF ... moreTAILSTOCK SPINDLE: 3-35/64” TAPER OF TAILSTOCK CENTER: MT#5, MAXIMUM TRAVERSE OF TAILSTOCK SPINDLE: 77” MAIN DRIVE MOTOR: 15 HP, RAPID FEED MOTOR FOR CARRIAGE: 1 HP, LUBRICATION PUMP MOTOR: 15 HP, LENGTH OF BED: 157-3/4” WIDTH OF BED: 19-5/8” WEIGHT: 9.600 LBS, MACHINE DIMENSIONS: 14’ L-R X 5’ F-B X 5’ H, ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, 15″4-JAW CHUCK, 26” FACEPLATE, TAPER ATTACHMENT, POWER RAPID TRAVERSE, 2) STEADY RESTS, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
No. 2 SJOGREN SPEED CHUCK & 2J COLLET SET engine lathe 2 j tool HARDINGE USA
good used 5C collet- speed chuck Sjogren No 2 Hardinge Bros USA 1/8. 5/32, 3/16, 3/16sq, 1/4, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 and 7/8" Hardinge 2J collets aluminum hand grip has wear and is chipped but it turns smooth add your own back plate please check my other auctions and happy bidding! will ship for $16.85 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ENGINE LATHE KNURLING TOOL HOLDER metal 3/4" x 5/8" x 6"
good used lathe tool holder- knurling has knurl on 1 end shank is approx 3/4" T x 5/8" W x 6" long good knurl will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Clausing Colchester 15" x 50" Engine Lathe
FOR MORE INFORMATION. PLEASE CONTACT KENNY BERGER- HASCO MACHINERY 732-446-9531(BEST WAY TO REACH) HASCOMCHY@AOL.COM Clausing Colchester 15" x 50" Engine Lathe Equipped with. 71/2 H.P. Motor. 3-Jaw Chuck. Thread dial. Inch/metric threading. 2000 RPM. Hard ways. Appx wt 3200lbs. Model 15" $7.950.00.
|
|
|
18 x 60 hwacheon engine lathe
very strong. Accurate 7-1/2 horsepower engine lathe with a 2' spindle bore and foot break, comes with accurite digital readout and 3 jaw chuck. 8644630040
|
|
|
TOS TRENCIN Model SN-71C 28" X 37 1/2" Gap 160" cc Engine Lathe
TOS-TRENCIN GAP-TYPE ENGINE LATHE Serial Number 977149960995 Date into service December 7th. 1997 Hardened Bed-Ways Steady Rest Follower Rest 3 Jaw Chuck 4 Jaw Chuck Dorian Tool Post 2 Dog Plates Taper Attachment Two Access Digital Readout Full Length of Bed Inch Metric Threading and Feeds Coolant Pump and Tank Rapid Traverse to Carriage and Cross-Slide Cam Lock Spindle D1-8 Removable Gap Bed 3 1/8" Hole in Spindle Machine Specifications: Hole Thru Spindle. 3 1/8" Swing Over Bed Ways. 28" Swing thru Gap. 37 1/2" Swing Over Cross-Slide. 16.5" Distance Between Centers. 160" Gap Length. 11.8" Tailstock. Spindle Diameter. 3.5" Tailstock. Spindle Travel. 9.4" Tailstock. Spindle Taper. 5 MT(16) Spindle Speeds. Range. 10 to 1000 RPM Feeds. 001 to.251 IPR Cross-Slide Cross Feeds.009 to.125 IPR(38) Whitworth ... moreThread Changes. Range. 1 to 80 TPI(29) Metric Leads. Range. 5 to 40 MM(26) Module Threads. Range. 25 to 20(31) D.P. Threads. 1/2 to 72 Motor, Horsepower. 10 HP. 3 Phase, 220 Volts. Weight, Approximately. 12.700 LBS, Size 24' Long x 6 1/2' Wide x 6 1/2' Tall. Specifications subject to verification. We are going to sell this Tos Trencin Model SN-71C Gap Bed Lathe for $24.700. USD without reserve. We will send the buyer an email with payment instructions. Payment to be in the form of a cashier's check or wire transfer. If PayPal is used please add 3% Three percent) for processing. Buyer to pay freight. Ask one of your local trucking companies for an LTL rate(Less than Load) call us for the Zip Code. Our Rigging& Loading for this machine is FREE! We load weekdays from 8 a.m. to 2 p.m. onto an open top truck. No van loading. Should you have any questions please contact us at 248 892.5233 weekdays between 7 a.m. and 4 p.m. EST. Time is money
|
|
|
OKUMA 14"x30" LS (LBS) Manual Engine Lathe, 8" Chuck - Rare Machine!
ebay template LBS 14" x 30" Engine Lathe I TEM S OLD A S P ICTURED Made in Japan. This Okuma lathe is a rare, hard to find machine in good condition, with minor wear and surface rust from previous use. Great running machine and very heavy duty. These lathes are notable for their very deep. Rigid bed, clean lines, superb detailing and thoughtful-design features to aid the operator in the production of high-class work. FEATURES 8 Inch. 3-Jaw Chuck, Toolpost SPECIFICATIONS Swing 14" Distance Between Centers. Approximate 30" Max Spindle Speed 2400 rpm Spindle Hole Diameter 1.5" Tailstock Taper No. 3*Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire ... morea professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we
|
|
|
Engine Lathe (Heavy Duty) 21" x 42" *** SEE VIDEO *** Akron, Ohio
Heavy Duty Engine Lathe Cholet 550 made in France see v i d e o below 21” swing 42” between centers adjustable air tail stock runs on 2 4 0 or 4 8 0 voltage 3 phase 32 to 1.6000 RPM’s 4 jaw chuck 12” 2” spindle bore built in micrometers for all travers(xyz) foot brake rapid traverse weighs approximately 4, 2 00 lbs. call 330-814-1434. very good condition and very dependable! Click the v i d e o below* Local Pick-Up Only(Located in Akron. Ohio) we will load you* Please communicate concerning& pick-up arraignments* AL Zinn 330-814-1434 Akron. Ohio we will accommodate you in all your efforts Use the contact information below for all arrangements. AL Zinn 330-814-1434 Akron. Ohio
|
|
|
21/32" x 120" Clausing Colchester Gap Bed Engine Lathe, Model Mastiff 1400
21/32" x 120" Clausing Colchester Gap Bed Engine Lathe, Model Mastiff 1400.S/N 6452, New 1979 Machine Specs: Swing Over ways 21" Swing in Gap 32" Length of Gap 8.5" Swing over Cross Slide 14" Center Distance 96" Spindle Bore 3-1/2" Spindle Speeds( 16) 18- 1400 RPM Spindle Mount D1-11. Spindle HP 12.5 HP 220/ 440 Volt 3 Phase Wired 440. Feeds.002- 032. Inch Threads 2- 72 TPI. Metric Threads.4- 14 MM Tail Stock Taper 6 MT. Tails Stock Travel 6" Weight 8000 LBS Approx. Equipped With: 2 Axis Heidenhain DRO. 15" 3 Jaw Chuck. 9" Roller Type Steady Rest. Thread Dial. Full Length Splash Guard. Coolant. Flame Hardened Ways. Just in Needs to be cleaned Excellent Condition- Bed and Screws really Nice Inspect Under Power in Our Branchburg NJ warehouse Questions call Dave@ 908-399-8133
|
|
|
ENGINE LATHE 4 WAY SQUARE/TURRET INDEXING TOOL POST, 4 1/2", 1-5/8" MAX TOOL BIT
NO RESERVE THIS auction for 1-PC used: ENGINE LATHE 4 WAY SQUARE/TURRET INDEXING TOOL POST. 4 1/2" 1-5/8" MAX TOOL BIT. Base has a 1-1/2" wide key for cross slide, used on metal cutting engine/turret lathes, comes with wrench, missing one screw, nice heavy duty unit, aprox. 7/8" from mounting surface to bottom of tool holder, good used condition. Shipping $13 priority. Postal money orders& company checks always welcome! Local pick-ups are always welcome(no charge) The following is some very informative radio links: http:www.soundwaves2000.com/radio%5Fliberty/ http:www.republicbroadcasting.org/index.php?cmd=listenlive, http:www.gcnlive.com/Listen_Live.html Because you can handle the truth! May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by ... moreFriday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f3ba5655b-0xf7-
|
|
|
BUCK USA 10" ENGINE LATHE CHUCK 4 jaw metal work tool holder AJUST-TRU # 1104
Good Used 10" Buck Chuck w/ key Buck Tool Co. USA 2 1/4" Thru Hole Ajust-Tru# 1104 Powered by The free listing tool. List your items fast and easy and manage your active items. Posted with
|
|
|
ENGINE LATHE THREADING TOOL HOLDER metal hss bit ROYSDEN 3K 60 degree
good used lathe tool holder- threading Roysden 3K 69 degree shank is approx 5/8" x 1" x 6 1/4" will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Flat Belt Lacing Hooks and Lacer Tools and Parts South Bend Logan Lathe engine
Flat belt lacing tool with clips. See pictures for further description. Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! Everything is pre-packaged and ready to go. I'm just waiting on you to buy it so I can slap an address label on it and get it out the door.UNLESS you need combined shipping. Combined Shipping Discounts: I will gladly combine shipping to offer discounts. Expect to pay a 1 time handling fee of $2.00 per box(not per item) Then actual shipping. Combined shipping takes a couple extra days to process. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please ... moredo not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
|
|
|
VINTAGE 1951 MONARCH LATHE SERIES 60 ENGINE & TOOLMAKER'S LATHES CATALOG
5 DAY AUCTION! 1951 MONARCH SERIES 60 LATHES CATALOG ENGINE& TOOLMAKER'S LATHES ENGINE LATHES 13/16/20" TOOLMAKER'S LATHES 13/16/20" DETAILED CONSTRUCTION& FEATURES LARGE ACCESSORIES SECTION 44 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.00 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL 2ND CHANCE OFFERS AVAILABLE ON SOME ITEMS NO PHOTOCOPY REQUESTS PLEASE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f47c81fe7-0xfd-
|
|
|
3 JAW ENGINE LATHE CHUCK metal work holder tool UNION MFG USA 9122
good used 3 jaw lathe chuck Union Mfg Co. USA# 9122 4 3/4" dia jaws adjust by scroll AND independently please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f4e0465d8-0xf3-
|
|
|
Leblond 17" x 30" Regal Gear Head Engine Lathe
Leblond 17" x 30" Regal Gear Head Engine Lathe LeBlond Gear Head Engine Lathe Ref.61-285 Model No. 17" x 30" Regal Serial No. 3D538 Swing Over Bed Ways: 17-3/4" Swing Over Cross Slide: 10-3/4" Maximum Distance between Centers: 30" Spindle Speeds: 38- 1500 RPM(12) Spindle Nose: L-1 Hole Thru Spindle: 1-3/4" Threading Range. Inch: 2- 112 TPI(48) Feed Rates: 002" 116"Rev(48) Tailstock Center Hole Taper: No. 4 Morse Taper Overall Dimensions: 42" x 86" x 58" Tall Equipped With: 10" 4-Jaw Chuck Micrometer Carriage Stop Threading Dial Splash Guard 5HP Main Spindle Drive 220/440 Volts 3 Phase 60 Hz Approximate Net Weight: 3.300 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. ... moreMonday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
Gits Lubricator Cups - One Dozen - 1/8" pipe - Engine - Lathe - Milling Machine
12 Gits lubricator cups. Used, some have corrosion or grime, a couple have a slot near the top of the cup, maybe to limit the"dose"
|
|
|
25 X 120" TOOLMEX MODEL TUR-630-A ENGINE LATHE
25 X 120" TOOLMEX MODEL TUR-630-A ENGINE LATHE 25 X 120" TOOLMEX MODEL TUR-630-A ENGINE LATHE: STOCK# 60046 SPECIFICATIONS SERIAL. 49664 MODEL. TUR-630-A YEAR. 1991 SWING OVER WAYS. 24.8" SWING OVER CROSS SLIDE. 14.9" DISTANCE BETWEEN CENTERS. 120" DIAMETER OF SPINDLE HOLE. 5-1/2" CHUCK FRONT. 15-1/2" 6 JAW CHUCK REAR. 15-1/2" 4 JAW SPINDLE SPEEDS. 27) 15 TO 1400 RPM LONGITUDINAL FEEDS. 42) 002 TO 121 IPR CROSS FEEDS. 001 TO.060 IPR THREADS ENGLISH. 42) 1 TO 88 TPI THREADS METRIC. 42) 1 TO 88 MM TAPER ATTACHMENT. YES RAPID TRAVERSE. YES TRAVEL DIAL. YES STEADY REST. 12" ROLLER TYPE COOLANT WITH CHIP PANS. YES MOTOR. 20 HORSEPOWER DIMENSIONS. 192" X 64" 60"H CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#60046 We accept Visa. Master Card, American Express, Discover. We also accept ... morePaypal. All purchases under $ 100.00 are expected to be paid within three days of end of auction. Multiple and single winning bids, totaling between $100.00 to $ 999.00 will need to be paid within two days of end of auction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may appl
|
|
|
25" X 66" PONAR WROCKAW ENGINE LATHE
25" X 66" PONAR WROCKAW ENGINE LATHE 25" X 66" PONAR WROCKAW ENGINE LATHE: STOCK# 59791 SPECIFICATIONS SERIAL. 39544 MODEL. TUR 63A YEAR NEW. 1982 SWING OVER WAYS. 26" SWING OVER CROSS. 15" DISTANCE BETWEEN CENTERS. 66" SPINDLE SPEEDS. 36) 18 TO 1800 RPM ENGLISH THREADS. 1 TO 88 TPI ENGLISH FEEDS. 011 TO.0233 IPR METRIC FEEDS. 0087 TO.035 MMPR METRIC THREADS. 1.5 TO 48 MM DIAMETER OF SPINDLE HOLE. 2-7/8" CHUCK ON SPINDLE. 15-1/2" 4 JAW TAPER ATTACHMENT. YES STEADY REST. 5" POINT HARD WAYS. YES THREAD DIAL. YES CHIP PANS. YES COOLANT. YES MOTOR. 10 HORSEPOWER WEIGHT. 7.600 LBS CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#59791 We accept Visa. Master Card, American Express, Discover. We also accept Paypal. All purchases under $ 100.00 are expected to be paid within three days of end of ... moreauction. Multiple and single winning bids, totaling between $100.00 to $ 999.00 will need to be paid within two days of end of auction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may apply. The United Parcel Service is another option for packages unde
|
|
|
Nardini ND-1785E Engine Lathe 17" x 85" with 2-Axis DRO and Spindle Bore 2 1/32"
FOR SALE: NARDINI Model ND-1785E Engine Lathe 17" x 85" Specifications: Nardini Model ND-1785E 17" x 85" Geared Head Engine Lathe With 2 Axis Anilam Wizard DRO Specifications: Height of Centers 8 5/8" Distance Between Centers 86" Swing over Bed 17 5/16" Swing over Wings of Saddle 15 3/8" Swing over Cross Slide 10 5/8" Cross Slide Travel 9 7/8" Top Slide Travel 5" Tool Section 3/4" x 3/4" Bed Width 10 5/8" Bed Height 12 5/8" Spindle Nose D1-6" Spindle Bore 2 1/32" Spindle Internal Taper 1:20 Taper in Reduction Sleeve 4 MT Spindle Speeds(18) 25-2000 Quill Diameter 2 3/8" Quill Taper 8 5/8" Quill Internal Taper 4 MT Lateral Adjustment 5/8" Number of Threads 216 Metric Threads(54) 0.40-18.472 Inch Threads(54) 42-2 3/4" Module Threads(54) 02-3.5 ... moreDiametral Pitch Threads(54) 84-3 Pitch of Leadscrew 4 Number of Feeds 264 Cross Feeds(132) 0.0010-0.0488 in/rev Longitudinal Feeds(132) 0.0021-0.0976 in/rev Motor 8/4 HP Coolant Unit Motor 1/8 HP Dimensions 146" x 40" Height 58" Weight 4220 lbs. Equipped With: Anilam 2 Axis Digital Read Out. 10” Pratt Benard 3 Jaw Chuck Coolant Contact: biomedtool@yahoo.com Purchasing Information: Payment must clear prior to shipment or pick up Payment methods include wire transfer. Certified check, personal/business check and paypal Warranty: Machine is in good working order and tested Freight and Shipping: Shipping/Trucking charge is not included in the machine price We coordinate shipping for you with professional trucking companies About Us and Our Mission: We are a consortium of three divisions selling biomedical. Scientific and cutting equipment. We have hundreds of pieces of equipment available for sale. We have decided to start listing on EBAY. We make sure to have the equipment tested prior to listing them. You will be buying from a company that has partners in Pediatrics. Cardio, Veterinary Medicine, Scientific Research, Bio-Chemistry, Tooling, Cutting Companies, et
|
|
|
Engine Lathe TOS 71N 24/32 x 132"
Good solid Lathe ready for work. This unit feature power rapid on the saddle is a must for long travel lathes. Approx. turning capacity on this unit is as follows: 24" on ways, 32" in the Gap, 132" on the X axis travel. It does come with two steady rests. We will load this machine for free on charge on to your truck. Machine can be inspected under power prior to purchase. This is a used machine so we will not be able to offer any warranty after the sale. We will load this machine unto your truck for free.
|
|
|
ROCKWELL 14" x 30" ENGINE LATHE
ROCKWELL 14" x 30" ENGINE LATHE. LOO SPINDLE NOSE, 8" 3-JAW CHUCK, 3 HP MOTOR 220 VOLT 3 PHASE, VARIABLE SPEED SPINDLE RPM, HARD BED WAYS ARE IN VERY GOOD CONDITION, MACHINE CAME FROM A LOCAL HIGH SCHOOL, UNDER DRIVE MAKES SOME NOISE, I THINK THE MACHINE NEEDS NEW BELTS. MACHINE CAN BE SEEN UNDER POWER, FREE LOADING ON TRUCK OR TRAILER. LOCAL DELIVERY AVAILABLE WITHIN 300 MILES OF DETROIT, MI( CALL FOR PRICE) $200.00 CRATING FEE IF NEEDED FOR SHIPPING, MACHINE APPROX. 2400 LBS. MACHINE TO BE PAID IN FULL WITHIN 10 DAYS AFTER AUCTION ENDS. QUESTIONS CALL 313-366-1060 OR EMAIL. THANKS FOR LOOKING!
|
|
|
13" SOUTH BEND ENGINE LATHE - WITH TAPER ATTACHMENT
13" SOUTH BEND ENGINE LATHE- CAT. NO. CL 145 B BED LENGTH 5' APPROX. 28" BETWEEN CENTERS, SPINDLE 2-1/4" 8 TPI, SOME NORMAL WEAR ON THE WAYS FOR ITS AGE, CAME FROM A HIGH SCHOOL, 8" 3-JAW CHUCK, DRILL CHUCK, LIVE AND DEAD CENTERS, TOOL POST AND HOLDERS, THREADING DIAL, TAPER ATTACHMENT, 1 HP 220 VOLT 3 PHASE MOTOR, MACHINE CAN BE SEEN UNDER POWER, APPROX. 1800 LBS. FREE LOADING ON TRUCK OR TRAILER, LOCAL DELIVERY AVAILABLE WITHIN 300 MILES OF DETROIT, MI( CALL FOR PRICE) $200.00 CRATING FEE IF NEEDED FOR SHIPPING. MACHINE CAN BE SEEN UNDER POWER. MACHINE TO BE PAID IN FULL WITHIN 10 DAYS AFTER AUCTION ENDS. QUESTIONS CALL 313-366-1060 OR EMAIL. THANKS FOR LOOKING!
|
|
|
CLAUSING COLCHESTER 13" ENGINE LATHE - NEW 1978
CLAUSING COLCHESTER 13" x 26" ENGINE LATHE MACHINE CAME FROM A LOCAL HIGH SCHOOL AND IS IN GREAT CONDITION. MACHINE RUNS QUIET AND SMOOTH WAYS ARE IN LIKE NEW CONDITION. 30- 2500 RPM 16 SPEEDS, INCH AND METRIC THREADING, 5 HP 220/ 440 VOLT MOTOR, HARDENED BEDWAYS, D1-4 SPINDLE, 6" PRATT BURNERD 3 JAW CHUCK, ORIGINAL PAINT, NO BACK SPLASH GUARD, APPROX. 2250 LBS. FREE LOADING ON TRUCK OR TRAILER. LOCAL DELIVERY WITHIN 300 MILES OF DETROIT, MI AVAILABLE( CALL FOR PRICE) $250 CRATING FEE IF NEEDED FOR SHIPPING. MACHINE CAN BE SEEN UNDER POWER. MACHINE TO BE PAID IN FULL WITHIN 10 DAYS AFTER AUCTION ENDS. QUESTION CALL 313-366-1060 OR EMAIL. THANKS FOR LOOKING!
|
|
|
MACHINIST LATHE Engine Mechanic Large Lot of Sockets and Extensions Tool
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL On May-08-13 at 17:06:41 PDT. Seller added the following information: THE BASE IS INCLUDED IN THE AUCTION. PLEASE DISREGARD THAT THE BASE IS NOT INCLUDED* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f60c40b7c-0x104-
|
|
|
tracer cadilac unit with cart and pump for large engine lathe with 36" swing
nice tracer for large manual lthe cadilac.With pump and cart, buyer to pay shipping cost
|
|
|
LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE
aims LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by R.K. LeBlond Machine Tool Co. This is a Geared Head Engine Lathe in working condition. Serial# 2B537 Features: Geared Head. Buck-Atlas 7.5" 3-Jaw Chuck. 14" Faceplate. Steady Rest. Coolant Facilities. Specifications: Swing: Swing Over Bed: 14" Swing Over Cross Slide: 8-1/2" Swing Over Compound Slide: 2" Capacities: Distance from Floor to Center: 42-1/2" Distance Between Centers: 44" Spindle: Mount: L00 Spindle Bore: 1-3/8" Spindle Speed Range: 45 to 1.800 RPM. Threads: Inch Threads: 4 to 224 tpi. Carriage: Cross Slide Travel: 7" Compound Rest Travel: 3" Tailstock: Spindle Travel: 6" Taper of Center: 3 ... moreMorse Taper Spindle Diameter: 2" Bed: Width of Bed Face: 12" Length of Bed: 68" General: Motor: 3 Horsepower. 220/440 Volt, 1,800 rpm, 8.6/4.3 Amps, 60 Hz, Three Phase Electrical: 220/440 Volt. Three Phase Overall Dimensions: 89" x 33" x 50" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD ENGINE LATHE LeBLOND 14 x 44" HEAVY DUTY GEARED HEAD EN
|
|
|
2 TAPERS LIVE CENTER Engine Metal Lathe
Preowned pair of TAPERS LIVE CENTER Engine Metal Lathe in good condition. Smaller one is IDEAL#3 MA and the other has no markings. You will receive the items you see here.
|
|
|
SHELDON 11" X 28" GUNSMITH / ENGINE LATHE, CABINET BASE, FULLY TOOLED, VERY NICE
U.S. MADE. SHELDON, CLASSIC GUNSMITH MODEL, XHD BED CASTING W/ 3 POINT MOUNTING, ENGINE LATHE. 11" X 28" CABINET MODEL W/ 5 TOOLING DRAWERS AND MOTOR/ BELT ACCESS DOOR. NEVER USED FOR PRODUCTION. CUTS U.S. METRIC THREADS W/ QUICK CHANGE THREADING/ FEED GEAR BOX, LEADSCREW USED FOR THREADING ONLY; FEED DRIVEN BY KEYED SHAFT, USED FOR R& D, AUTOMOTIVE VALVE& VALVE GUIDE, VALVE GEAR AND PROTOTYPE PARTS IN MY CUSTOM AUTOMOTIVE MACHINE SHOP. COMPLETE SET OF 5-C COLLETS, SOFT COLLETS AND COLLET CHUCK JAWS, DRAW BAR, NEW 6" 3 JAW PRECISION CHUCK, SEVERAL LARGER AND SMALLER 3& 4 JAW CHUCKS WITH SOFT JAWS, SEVERAL TYPES OF 4 WAY TOOL HOLDERS, MANY SIZES OF LIVE AND DEAD CENTERS, SEVERAL SIZES OF DRILL CHUCKS, CENTER& STEADY RESTS, FACE& DRIVE PLATES W/DOGS, CROSS SLIDE MILLING ATTACHMENT, BLANK SOFT COLLETS& ... moreBLANK SOFT COLLET CHUCKS, 2 MICROMETER SADDLE STOPS, LOTS OF CARBIDE& HHS TOOL BITS, CUTOFF BLADES& KNURLING TOOLS AND LOTS OF OTHER TOOLING TOO NUMEROUS TO LIST. THERE IS MORE TOOLING THAT YOU COULD POSSIBLY USE OR EVER NEED. THIS LATHE IS AN EASY TO USE, SOLID AND RELIABLE"GARAGE SIZED" ENGINE LATHE, FOR AMATEUR AND PROFESSIONAL ALIKE. REPAIR PARTS READILY AVAILABLE FROM SHELDON IN THE U.S.A. THIS IS THE LATHE YOU WANT TO START OUT WITH* A FORGIVING, SIMPLE, BUT STURDY CLASSIC ENGINE LATHE FOR GUNSMITH, GENERAL AND AMATEUR OR PROFESSIONAL USE. MERCHANDISE NOT RELEASED UNTIL PAYMENT IS FULLY CONFIRMED AVAILABLE FOR PICKUP AT LOCATION ONLY NO SHIPPING AVAILABLE
|
|
|
LEBLONDE 19x54 Engine Lathe Servo Shift Great Shape Original Owner + Tooling
This is very good condition LEBLONDE 19" x 54" Servo Shift Engine Lathe. Original Owner. Very precise and accurate. Purchased new in 1982. Includes 3 jaw chuck. 4 jaw chuck, faceplate, kdk tooling, 3 jaw buck style chuck(paid over $2000 for it alone) Includes everything seen in the pictures as far as tooling goes. Priced for a quick sale. Easy access for loading by your carrier. Buyer will need to send a truck and forklift to load. Local pickup welcome. Please email with any questions. Thanks, Troy
|
|
|
ENGINE LATHE or MILL 3/4" x 7" BORING BAR tool holder 3/8" hss cutting bit
good used lathe or mill boring bar mfg not marked holds 3/8" HSS bit at 45 degrees approx 3/4" shank x 7" long 3/8" hss bit included please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
YAM 14" x 28" GEARED HEAD ENGINE LATHE - #YAM-700 / W KDK TOOLING (OC25)
Up for Sale! YAM 14" x 28" GEARED HEAD ENGINE LATHE- YAM-700/ W KDK TOOLING(OC25) Model:700, Cap: 14" swing Bed Cap 28" Serial:058910, KDK Tool post and holder 9" 3 jaw chuck. Live Center tail stock. Lathe is in great working condition. Lathe can be previewed at our facility in Huntington Beach. Ca We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f6ec52712-0x100-
|
|
|
ALORIS USA BB-5 ENGINE LATHE 1 1/2 x 22 BORING BAR tool holder 1/2 MO MAX COBALT
good used lathe boring bar Aloris USA BB-5 holds 1/2" HSS bits at 90 and 45 degrees approx 1 1/2" shank x 22" long with(2) 1/2" Mo Max Cobalt bits please check my other auctions and happy bidding! everything we can combine into a large USPS flatrate box will ship for $16.85 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WEBB / TAKISAWA 14"x30" MANUAL ENGINE LATHE with 5C-Collet Closer & Toolpost
ebay template TSL-800 DELUXE 14" x 30" Manual Engine Lathe I TEM S OLD A S P ICTURED FEATURES 5C Collet Closer Toolpost Coolant Motor Foot brake INCLUDES Several 5C collets Center with MT#3 taper SPECIFICATIONS Swing Over Bedways 14 1/ 8" Swing Over Cross Slide 8¼" Hole Thru Spindle 1 3/ 8" Spindle Nose D1-6" Distance Between Centers 30" 800mm) Spindle Speed Range. 6 83- 1030 rpm Longitudinal Feed Range. 36.0020- 1417 ipr Tailstock Spindle Taper#3MT Tailstock Spindle Travel 5¾" Floor Space 76" x 30" Machine Height 48" Machine Weight. Approx 2.450 lbs*Specifications subject to verification CONDITION Good working condition. Please call for more details. Ask for Jerad(818) 718-6734 INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional ... moreinspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Sat
|
|
|
LEBLOND 19x54 Engine Lathe Servo Shift Great Shape Original Owner + Tooling
This is very good condition LEBLOND 19" x 54" Servo Shift Engine Lathe. Original Owner. Very precise and accurate. Purchased new in 1982. Serial# 12E-406 X 3826 Includes 3 jaw chuck. 4 jaw chuck, faceplate, kdk tooling, 3 jaw buck style chuck(paid over $2000 for it alone) Includes everything seen in the pictures as far as tooling goes. Priced for a quick sale. Easy access for loading by your carrier. Buyer will need to send a truck and forklift to load. Local pickup welcome. Please email with any questions. Thanks, Troy
|
|
|
Engine Lathe Turret Tool Post Holder 4 way Square 6" x 6" x 4" h x 2" Tool Open
Engine Lathe Turret Tool Post Holder 4 way Square 6" x 6" x 4" h x 2" Tool Opening. ITEMS SOLD AS IS. WHERE IS stock# 3671 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
SUMMIT MODEL 16 x 40B 16" x 40" PRECISION GEARED HEAD ENGINE LATHE
SPECIFICATIONS: Swing Over Bed- 16" Swing Over Cross Slide- 9-3/8" Swing In Removeable Gap- 25-1/8" Length of Removeable Gap- 15" Length of Gap in Front of Faceplate- 8-3/8" Workpiece Weight Capacity Between Centers w/ Steady Rest- 5.000 Lbs. Spindle Speeds(12) 20 to 2000 RPM Hole Thru Spindle- 3" Spindle Nose Type- D-1-8" Headstock Center- 6MT Thread Range- Inch(64) 1/4 to 60 TPI-Metric(64) 5 to 120 Longitudinal Feeds(124) 00185 to.44474" Cross Feeds(124) 0007 to.22237" Cross Slide Travel- 11-3/8" Compound Rest Travel- 5-3/8" Tailstock Taper- 5 MT Tailstock Quill Travel- 9-1/2" EQUIPMENT: 9-1/2" 3-Jaw Universal Chuck 15-1/2" 4-Jaw Independent Chuck Roller Type Steady Rest- 1/2" to 6-1/8" Capacity Follower Rest- 1/2" to 7-7/8" Capacity Taper Attachment ... moreTrak Model 102 2-Axis Digital Readout System Quick Change Toolholder Jacobs Key Chuck for Tailstock Coolant System Chip Pans& Rear Splash Guard Hardened& Ground Bedways Motor and Controls- 10 HP 3/60/220-440 Volt Coolant Motor and Controls- 1/4 HP 3/60/220-440 Volt Floor Space: 101" L-R x 47" F-B x 60" High Weight: 2.900 Lbs. Approx. Machine New 2006 STOCK#7143P- Serial#35602
|
|
|
YAM ENGINE LATHE MODEL 14" X 40" WITH TOOLING
YAM ENGINE LATHE MODEL 14" X 40" WITH TOOLING
|
|
|
ACRA 16"x40" PRECISION ENGINE LATHE 5C Collet Closer, 8" Chuck, 1800rpm
ebay template 16" x 40" Precision Engine Lathe I TEM S OLD A S P ICTURED FEATURES 5C Collet Closer 5C Spindle KDK Toolpost Trav-A-Dial Hardened and Ground Bed Way Tang in Tailstock Foot Brake Low Voltage Controls Adjustable Apron Clutch Inch/Metric Gear Box ACCESSORIES INCLUDED 8" 3-Jaw Chuck Leveling Pads(4) KDK toolholders SPECIFICATIONS CAPACITY Swing Over Bed 16" Swing Over Cross Side 9" Swing In Gap 24" Distance Between Centers 40" Bed Width 11¾" SPINDLE Spindle Nose D1-8 Spindle Hole 2" Spindle Speeds(12) 23 to 1800 RPM TRAVEL Cross Slide 7.8" THREADS& FEEDS Inch Threads. 32 4 ~ 56 TPI Metric Threads. 21 0.5 ~ 7 MM Feeds 0.0016 ~ 0.0234 IPR TAILSTOCK Quill Travel 5" Quill Taper MT No.4 POWER Spindle Drive Motor 5 HP Voltage 220 Volt. 3 Phase WEIGHT Gross Weight 4000 LBS ... moreDimension W x L x H 86" x 36" x 48" Specifications subject to verification CONDITION Ran and tested. In good working condition. Please call for more details. Ask for Pat or Jerad(818) 718-6734 INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can b
|
|
|
LeHigh Mdl D-25, 25"/33" X 200" Geared Head Engine Lathe, w/ 4 7/8" Spindle Hole
Now available for your inspection under power and purchase at our JV Partners Warehouse in Cincinnati. Ohio is this"Very Nice" LeHigh Model D-25 25"33" swing X 200" cc Geared Head Engine Lathe. S/N 971358, Manufactured New in 1998, w/Taper Attachment and Inch and Metric Threading. We have run this machine through all speeds and feeds and find it to be in Very Good Operating Condition. Further. It is equipped with a very desirable 4 7/8" Spindle Hole, Inch and Metric Threading, Removable Gap, 3) Steady Rests, and Taper Attachment. These LeHigh Engine Lathes are Excellent Engine Lathes Built With a Lot of Quality in China. Specifications are as follows: 25"33" x 200" LEHIGH. Gap Bed, 4-7/8" Hole, 15" OCS, 12-1000 RPM, Inch/mm, Taper, 15 HP, 1998 LEHIGH GAP BED ENGINE LATHE MODEL: D-25 SERIAL ... moreNUMBER: 971358 Year: 1998 GENERAL SPECIFICATIONS Swing Over Bed: 25" Swing Over Cross Slide: 15" Swing In Gap: 33" Distance Between Centers: 200" Spindle Hole: 4-7/8" Spindle Nose: D1-11" Camlock Spindle Speeds: 12- 1000 RPM Longitudinal Feeds: 0031" 0589" Inch Threads: 2- 24 TPI Metric Threads: 1- 192 mm Modular Threads: 25- 48 mm DP Threads: 1- 96 D.P. Rapid Longitudinal Travel: 160 IPM Rapid Cross Travel: 80 IPM Travel Of Cross Slide: 14" Travel Of Compound Rest: 6-1/2" Tailstock Quill Diameter: 4" Tailstock Quill Travel: 10" Tailstock Center: No. 5 M.T. EQUIPPED WITH 15 HP Main Drive Motor 19-3/4" 4-Jaw Chuck(3) Steady Rest Taper Attachment Approximate Weight: 15.000 Lbs. F.O.B. Cincinnati. Ohio ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER Note: There is some light scoring on the ways. You can see this very nice machine tool under power at our JV Partners Warehouse in Cincinnati. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Current Model(See a New One at: LeHigh Model D-25 Geared Head Engine Lathe built with a whole lot of quality in China. Overall. A"Gre
|
|
|
24" Swg 120" cc Pasquino ENGINE LATHE, Gap Bed, Inch/Metric, Rapid, 3-Jaw, Toolp
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 24" Swg 120" cc Pasquino ENGINE LATHE. Gap Bed, Inch/Metric, Rapid, 3-Jaw, Toolp Ref# 145475 iammdna XLATHE 24"34" x 120" PASQUINO-MILANO GAP BED ENGINE LATHE NEW: 1960'S ... moreSPECIFICATIONS: SWING OVER BED. 24-1/4" SWING OVER CROSS SLIDE. 14-1/2" SWING OVER GAP. 34" DISTANCE BETWEEN CENTERS. 120" BED WIDTH. 18" SPINDLE SPEEDS(16) 22- 1200 RPM HOLE THRU SPINDLE. 2-1/2" SPINDLE NOSE. L NOSE FEED RANGE. 05- 937 THREADING- INCH. 4- 60 TPI THREADING- METRIC. 5- 7.5 MM TAILSTOCK TAPER. 5MT QUILL TRAVEL. 7-7/78" APPROX WEIGHT. 10.500 LBS APPROX DIMENSIONS. 190"L x 4'5"W x 55"H EQUIPPED WITH: 3-JAW CHUCK QUICK CHANGE TOOLPOST REMOVEABLE GAP BLOCK HARDENED& GROUND BEDWAYS COOLANT SYSTEM POWER RAPID TRAVERSE 18 HORSE POWER SPINDLE MOTOR INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE Machine Location: HARRISON. NJ Click Here For More Pasquino Machines Click Here For More Toolroom Machines- ENGINE LATHES(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended tr
|
|
|
LeBlond Model 19 Engine Lathe 20" x 60" with 2-Axis DRO, Tailstock and Warranty
LeBlond Model 19 Engine Lathe 20" x 60" Manufacturer: LEBLOND Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Specifications: SWING OVER BED. 20" SWING OVER SLIDE.16" DISTANCE BETWEEN CENTERS: 60" SPEEDS. 8) 30- 634 RPM MAIN DRIVE MOTOR. 3 HP. 1750 RPM, 220/440V. 3/60 SPINDLE NOSE. L-2 LONG KEY TAPER TAILSTOCK TAPER. MO.5 SPINDLE HOLE. 1 1/2" EQUIPPED WITH: NEWELL 2-AXIS DRO WITH CABLES& SCALES 9" BUCK 3-JAW CHUCK WITH SOLID REVERSIBLE TOP JAWS FULL LENGTH LEAD SCREW THREADING 6" 3-POINT STEADY REST THREAD DIAL 2- MICROMETER CARRIAGE STOPS CHIP PAN JACOBS DRILL CHUCK QUICK CHANGE TOOL HOLDER 4-WAY TOOL POST DEAD CENTERS ASSORTED SPANNER& CHUCK WRENCHES WORK LIGHT TAILSTOCK PAYMENT: Payments can be made by Bank Wire. Check, Paypal, Money ... moreOrder or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight cost. Buyer is responsible or assumes liability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible for all arrangements and costs related to shipping. Any relevant duties. Customs, brokerage fees, taxes, and charges are the buyers responsibility. These charges may be collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Available for pick-up on Monday to Friday during business hours and on Saturday if requested. Feel free to contact us if you have any questions or would like more information.
|
|
|
Binns & Berry 40” x 171” Engine Lathe
Item#2449- Binns& Berry 40” x 171” Engine Lathe Equipped With: 1) Steady Rest"turn through" 1" to 10" dia. range(1) Steady Rest. full enclosed) 1" to 12" dia. range 36" Buck 4 jaw chuck. Front 18" 4 jaw chuck. Rear Power feed to Top Slide(compound) Rapid Traverse to Carriage and Cross Slide 3 Way Bed allows Carriage to pass by Tailstock Inch/Metric threading Tailstock. 2 speed, 8:1 ratio Positive thread stop Chip and coolant trough Chuck guards Manuals Machine Specifications: Swing over bed. 40" Swing over cross slide. 33 1/2" Distance between centers.171" Swing in gap. 59" Length of gap. 17.8" Spindle speeds(variable. 3 ranges) 50 to 550 rpm 10 to 260 rpm 1.5 to 50 rpm Feeds(70) Longitudinal: 0007 to.070 ipr(70) Cross: 0005 to.050 ipr Threads(90) Inch. 1/4 to 112(80) Metric. ... more0.5 to 112 Power Top Slide Travel. 16" Hole thru spindle: 6" dia. Spindle Mounting. A2-15 Tailstock taper. 6 Morse Spindle Horsepower. 30 Shipping Point: TX Price: $49.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f7c2e914b-0xf8-
|
|
|
52” X 16’ CC American Pacemaker Engine Lathe
Item#2450- 52” X 16’ CC American Pacemaker Engine Lathe Equipped With: HARDWAYS- TAPER ATTACHMENT- INCH THREADING- POWER RAPID TRAVERSE- 35" DIAMETER 4-JAW CHUCK- 24" CAPACITY ROLLER TYPE STEADY REST- LIVE CENTER BUILT INTO TAILSTOCK- FULL LENGTH CHIP PAN- 60 HORSE POWER MAIN MOTOR Machine Specifications: SPECIFICATIONS: SWING OVER BEDWAYS. 53" SWING OVER CROSS SLIDE. 39" DISTANNCE BETWEEN CENTERS. 16' SPINDLE SPEEDS FROM. 8.75 TO 750 RPM SPINDLE THRU HOLE. 2.75" SPINDLE NOSE. L-3 TAILSTOCK SPINDLE DIAMETER. 5-1/2" TAILSTOCK SPINDLE TRAVEL. 19" MODEL: J-6 NEW 1957 Shipping Point: Price: $97.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
|
Engine Lathe Micro Carriage Stop with Fine Adjustment .05mm
Engine Lathe Micro Carriage Stop with Fine Adjustment.05mm ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3705-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f7e419aed-0xf8-
|
|
|
OLD VINTAGE ANTIQUE SOUTH BEND ENGINE METAL BENCH LATHE
OLD VINTAGE ANTIQUE SOUTH BEND ENGINE METAL BENCH LATHE Item Description. Hi. I have up for sale this early vintage machinist metal lathe. Tag on the side says South Bend engine lathes. It comes with a box of extra parts, Jacob chuck and key. The table is not included in the auction, it's just for display purposes. This is a estate item and I've done nothing to it. The widow of the man who owned this told me that her husband was using this until his passing. It will need new belts and the ac cord needs rewiring. Buyer can pick this up in Piqua Ohio or I will ship this anywhere in the lower 48 states for a flat rate of $375.00. That includes crating. Shipping, insurance and tracking. Thanks. Click any image to see it full size. Payment Details. Please pay with paypal.com. Shipping Details. Please add $375.00 shipping to lower 48 states ... moreonly. Alaska and Hawaii please contact me for a quote. Thanks. At BiggerBids.com.
|
|
|
43”/48” x 192” cc Clovis Gap Bed Engine Lathe
Item#2452- 43”48” x 192” cc Clovis Gap Bed Engine Lathe Equipped With: All geared spindle head 17" 3-Jaw universal chuck 32" 4-Jaw independent chuck Power rapid traverse to carriage Threading 4-Way turret tool post(2) Feed rod and lead screw carriers Additional(removable) 48" long bed section Machine Specifications: Swing over bed ways: 43" Swing in gap: 48" Length of gap section on bed: 18.5" Distance between centers: 192" 240" with additional bed section) Spindle nose: L-Type Spindle speeds(12) 6.5 to 520 RPM Shipping Point: Price: $44.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f82d7b0ea-0xf4-
|
|
 |