|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Harrison, United States 30" X Axis 3HP Spindle Alliant PROTOTRAK SMX CNC VERTICAL MILL, Proto-Trak 3-Axis SMX Cntrl,R-8 PDB. ALLIANT / PROTO-TRAK 3-AXIS CNC VERTICAL MILL. MODEL:SMX ... more3 -AXIS CNC SYSTEM. WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS.
Buy It Now
Condition: Used Location: Harrison, United States 32" X 3HP Spdl Southwest Ind. Sport K3 CNC VERTICAL MILL, Proto-Trak M2 2-Axis C. 32" X Axis 3HP Spindle Southwest Ind. SOUTHWESTERN INDUSTRIES. PROTO-TRAK ... more2-AXIS CNC VERTICAL MILL. WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS.
Buy It Now
Condition: Used Location: Pomona, United States Travel (X, Y, Z Axis): 40" x 20" x 23.5". Spindle Taper: NMTB 40. Head Swivel Left & Righ5t: 90 Degrees. Table Size: 50" x 12". Maximum Weight Of Workpiece: ... more1,760 Lbs. Weight (Approximate): 4,400 lbs.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Harrison, United States ALLIANT / PROTO-TRAK 3-AXIS CNC VERTICAL MILL. MODEL: SMX 3 -AXIS CNC SYSTEM. WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS. EVS ELECTRONIC VARIABLE SPEED ... moreHEAD w/INVERTER DRIVE. VARIABLE SPINDLE SPEEDS. 60 TO 4200 RPM.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Roanoke, United States ProtoTRAK EMX CNC. Digital Servo Amplifiers – custom designed for ProtoTRAK operation. TRAK K3 EMX Machine Specifications. Parts Graphics display. Look ... more– a single button press to view graphics during programming.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Coloma, United States NICE TRAC MILL NEW MOTOR AND ON/OFF SWITCH
Buy It Now
Condition: Used Location: Roanoke, United States Table Travel X Axis: 33”. Table Travel Y Axis: 12”. UsedBRIDGEPORT MODEL SERIES I KNEE MILL. Table: 9” x 48”. When you buy from Select Machine you are ... morenot only buying from a reputable dealer but also a sales and service staff with well over two hundred years of combined experience.
Buy It Now
Condition: Used Location: Lenapah, United States
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Rockford, United States Condition: Pre-owned, in excellent working condition. This Southwestern Industries Trak DPM 2 Bed Mill has been well-maintained and regularly serviced ... moreto ensure optimal performance. It is perfect for precision milling tasks and is designed for efficient operation in industrial settings.
Buy It Now
Condition: Used Location: Harrison, United States MODEL: 5VK, S/N: 7159. ROYAL / PROTO-TRAK 3-AXIS CNC VERTICAL MILL. BOLT HOLE PATTERNS, RS-232. VARIABLE SPINDLE SPEEDS. 60 TO 4200 RPM. SPINDLE TAPER. ... more. NST #40.
Buy It Now
Condition: Used Location: Harrison, United States 33" X Axis 3HP Spindle Royal 330VK CNC VERTICAL MILL, Proto-Trak SMX Cntrl,Electronic HandWheels,R-8. ROYAL PROTO-TRAK 2-AXIS CNC VERTICAL MILL. ELECTRONIC ... moreHANDWHEELS AND 3 AXIS READOUTS. BOLT HOLE PATTERNS, RS-232.
Buy It Now
Condition: Used Location: Harrison, United States MODEL:SMX 3 -AXIS CNC SYSTEM. BRIDGEPORT PROTO-TRAK 3-AXIS CNC VERTICAL MILL. WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS. BIJUR LUBRICATION SYSTEM. FLOOR ... moreSPACE.. 60" x 63" x 82".
Buy It Now
Condition: Used Location: Roanoke, United States ProtoTRAK SMX System Specifications. ProtoTRAK SMX CNC. ProtoTRAK System Hardware. Converter for prior-generation ProtoTRAK programs. Rotate about Z axis ... morefor skewing data. Spindle Speed Vari-speed head – 60-4200 RPM.
Buy It Now
Condition: Used Location: Louisville, United States
Buy It Now
Condition: Used Location: Rochester, United States Type: CNC Milling Machine. Make: Bridgeport. Motor HP: 2. Motor Electric: 220/230/440/460V 3 Phase. Serial: 134400. Motor RPM: 1415.
Buy It Now
Condition: Used Location: Harrison, United States 30" X 5HP Spdl Southwest Ind. DPM V3 CNC VERTICAL MILL, ProtoTrak VM Cntrl,BedTy. 30" X Axis 5HP Spindle Southwest Ind. DPM V3 CNC VERTICAL MILL, ProtoTrak ... moreVM Cntrl,BedType,#40PDB,El. MODEL: DPM V3, S/N: 041BJ12606, NEW: 2004.
Buy It Now
Condition: Used Location: Harrison, United States 31" X 5HP Spdl Southwest Ind. DPM SX3 CNC VERTICAL MILL, Trak SMX Cntrl 3 Axis,P. 31" X Axis 5HP Spindle Southwest Ind. DPM SX3 CNC VERTICAL MILL, Trak ... moreSMX Cntrl 3 Axis,Prog Spindle. TRAK 3-AXIS CNC BED MILL w/HAND WHEELS.
Buy It Now
Condition: Used Location: Miamisburg, United States 3,000# and occupy 6’ of bed space. Further, inform them that it needs to be on air ride and tarped. "Z" Axis Read Out of Quill Travel On ProtoTrak Screen. ... moreZ-Axis (Vertical Knee Travel) 16". Max Rapid Feed 250 IPM.
Buy It Now
Condition: Used Location: Holland, United States The Z-Axis has a swivel head that you can lock down to use it manually and of course you can use the Y & X-Axis manually as well. Spindle is a NMTB-30 ... moretaper and included are a ER32 Collet Chuck, 3/8" ER32 Collet & wrench, 3/4" & 1" endmill holders.
Buy It Now
Condition: Used Location: Simpsonville, United States ProtoTRAK CNC. Even if your people have never used a CNC before, they will be able to learn the ProtoTRAK in just a few hours. Program the ProtoTRAK EMX ... moreby making simple selections and answering prompts in plain English.
Buy It Now
Condition: Used Location: Newton, United States Power feed on the knee (Z axis). 2-axis CNC, 3-axis DRO. Quill Travel: 5”. Power Drawbar. Lube system.
Buy It Now
Condition: Used Location: Cincinnati, United States Power drawbar.
Buy It Now
Condition: Used Location: Orange City, United States Greenway Product Number: 10775. Power drawbar. Spindle speeds... 70-4200. Automatic lubrication. Equipped with Boring capacity... 4.75”.
Buy It Now
$12.98 Shipping Condition: Used Location: Owensboro, United States Sold AS IS. See other machinist tools listed.
Buy It Now
Free Shipping Condition: New Location: Parrish, United States 15814R REV H is only for ProtoTrak MX2. 15814R REV F. Are you using a Prototrak MX2 Hitachi CRT display ?. Are you experiencing fading, burn-in or dimming?. ... moreSave your money and buy a Monitech monitor!
Buy It Now
Condition: Used Location: Cincinnati, United States SWI TRAK CNC VERTICAL MACHINING CENTER. SERIAL NUMBER: 182DJ323 Year: 2018. MODEL: LPM. Spindle Speed: 8000 RPM. Maximum Clearance, Spindle Center To ... moreColumn: 19-1/4". Maximum Table Load: 1000 Lbs. Z-Axis Travel: 21".
Buy It Now
Condition: Used Location: Graytown, United States Prototrak 1630 HSSX. Southwestern Industries. These little lathes are easy to program and easy to use. This one is in great shape. We actually bought ... morethis for a project and after getting it realized we cannot use it as the hole through is too small.
Buy It Now
$65.00 Shipping Condition: Used Location: Sterling Heights, United States Low hour prototrak mill motor. Nothing wrong with motor we just swapped all the prototraks to variable speed baldor setups. This motor has very low hours ... moreand is very very clean. No pulley. What you see is what you get.
Buy It Now
Condition: Used Location: Oregon, United States Overall this machine is in nice shape ready to put to use. We ran this unit and it ran great We ran test on ball screws in several places and no more ... morethan. 0015 so this machine is tight.
Buy It Now
Condition: Used Location: Harrison, United States 30" X 5HP Spdl Southwest Ind. DPM V3 CNC VERTICAL MILL, ProtoTrak VM Cntrl,BedTy. 30" X Axis 5HP Spindle Southwest Ind. DPM V3 CNC VERTICAL MILL, ProtoTrak ... moreVM Cntrl,BedType,#40PDB,El. MODEL: DPM V3, S/N: 043BJ12998, NEW: 2004.
Buy It Now
Condition: Used Location: Warren, United States Table Working Surface: 9″ x 42″. Main Drive Motor: 3HP. Spindle Speeds: Variable Speed 60 to 4500 RPM. Head Travel: 18″. Max Height Table to Spindle: ... more18″. Cross Travel: 12″. Weight: 2,200 Lbs. Longitudinal Travel: 30″.
Buy It Now
Condition: Used Location: Newton, United States Table Size: 10" x 50". In service and under power. Power drawbar.
Buy It Now
Condition: Used Location: Harrison, United States 32" X 3HP Spdl Southwest Ind. 32" X Axis 3HP Spindle Southwest Ind. MODEL: K3SX, S/N: 051CK13368, NEW: 2005. SOUTHWESTERN INDUSTRIES VERTICAL MILL. - ... morePRECISION BALL SCREWS AND SERVO DRIVES FOR EACH AXIS.
Buy It Now
Condition: Used Location: Cincinnati, United States X axis (table) 32”. Y axis (saddle) 15”. 9" X 48" table.
Buy It Now
Condition: Used Location: Orange City, United States Greenway Product Number: 10873. Power drawbar. Spindle speeds... 70-4200. Automatic lubrication. Equipped with Boring capacity... 4.75”.
Buy It Now
Condition: Used Location: Waukesha, United States KONDIA FV-1. MAKE. CLAUSING. X AXIS TRAVEL. 33". Y AXIS TRAVEL. 15". EQUIPPED WITH SERIAL NUMBER. S6956. WEIGHT APPROX. 2500 LBS. 72" X 72" X 82" H.
Buy It Now
Condition: Used Location: Harrison, United States 31" X 18.5" Y Southwest Ind. 31" X Axis 18.5" Y Axis Southwest Ind. TRAK VERTICAL MACHINING CENTER. MODEL: LPM, S/N: 122DJ64413, NEW: 2012. Play YouTube ... moreVideo of this Item. TOOL CHANGER CAPACITY.. 16 POSITIONS.
Buy It Now
Free Shipping Condition: New Location: Cicero, United States Complete Power Drawbar Kit for Trak K3 Knee Mill.
Buy It Now
Condition: Used Location: Orange City, United States Greenway Product Number: 10863. Column travel.... Spindle center to column... 23.75”. Back splash and chip pan.
Buy It Now
Free Shipping Condition: New – Open box Location: Cicero, United States Part# 26987. Power Drawbars to fit Southwestern Industries K2,K3 Knee mills with R-8 spindles.
Buy It Now
Free Shipping Condition: New – Open box Location: Rochester, United States This air gun socket is part of the air gun assembly. It fits with the splines of the power drawbar to rotate the drawbar. 1/2" drive. Maxi Torque-Rite ... moreAir Gun Socket.
Buy It Now
$53.00 Shipping Condition: Used Location: Perth Amboy, United States This is a prototrak servo bracket but should work with most any servos / steppers of the proper size. This Bracket allows you to mount a servo or stepper ... moremotor to the X axis of a Bridgeport or Bridgeport Clone milling machine.
Buy It Now
Free Shipping Condition: New – Open box Location: Rochester, United States Fits DPMSX3, DPMSX5, DPMRX3, DPMRX5 and K4 with serial #'s with CF, CS, DL and AC. Power Drawbars to fit Southwestern Industries Prototrak Bed Mills.
Buy It Now
Condition: Used Location: Cincinnati, United States Knee Vertical Travel (Z-Axis) 16". Power Feed To Table. One Shot Lube System. Floor Space Required, W x D 5'3" x 4'11". Electrical System 220-440/3/60. ... moreSpindle Motor, Horsepower/RPM 3 HP/1730 RPM. Spindle Speeds, Range 55 to 4250 RPM.
Buy It Now
$10.60 Shipping Condition: New Location: Kent, United States Mill Prototrak & Trump Bando VS Vari/Variable Speed Drive Belt 875VC3630 atrump
Buy It Now
$44.40 Shipping Condition: New Location: Greeneville, United States Maxi torque rite drawbar Tech Data and Quantity Specials. Maxi Torque Rite Air Power Draw Bar is a Air Powered Drawbar Pneumatically Operated. TR100-DB ... moreAutomatic Drawbar complete system (shown above).
Buy It Now
Free Shipping Condition: Used Location: West Harrison, United States Southwestern Industries ProtoTrak MXe Programming, Operating, Care Manual Version 040197 Part Number 20292.
Buy It Now
$13.60 Shipping Condition: Used Location: Dayton, United States Prototrak SWI Rotary Encoder M250 Y axis mounting breacket. Condition is Used NO CRACKS .Shipped with USPS Priority Mail.
Buy It Now
$53.00 Shipping Condition: Used Location: Perth Amboy, United States This is a prototrak servo bracket but should work with most any servos / steppers of the proper size. This Bracket allows you to mount a servo or stepper ... moremotor to the Y axis of a Bridgeport or Bridgeport Clone milling machine.
Buy It Now
$53.00 Shipping Condition: Used Location: Perth Amboy, United States This is a prototrak servo bracket but should work with most any servos / steppers of the proper size. This Bracket allows you to mount a servo or stepper ... moremotor to the Y axis of a Bridgeport or Bridgeport Clone milling machine.
Buy It Now
Condition: Used Location: Roanoke, United States ProtoTRAK SLX System Specifications. ProtoTRAK SLX CNC. Converter for prior-generation ProtoTRAK programs. ProtoTRAK System Hardware. Fine/course handwheel ... moreresolution. Selectable Fine/Coarse handwheel resolution.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve read Parts of these Programming and Operations Manuals. ... moreThere are So Many Possibilities. Pictures of the Machine Says A Thousand Words.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States Bando VS Vari/Variable Speed Drive Belt 875VC3630. Angle: 30 ° (15° on each side, top and bottom).
Buy It Now
Free Shipping Condition: New Location: Canada Are you using a ProtoTrak AGE2/3 CRT display ?. Are you experiencing fading, burn-in or dimming?. Save your money and buy a Monitech monitor! Get your ... moreProtoTrak AGE2/3 back up and running with a new Monitech LCD !
Buy It Now
Free Shipping Condition: New Location: Canada Are you using a Prototrak MX3 CRT display ?. Are you experiencing fading, burn-in or dimming?. Save your money and buy a Monitech monitor! Get your Prototrak ... moreMX3 back up and running with a new Monitech LCD !
|
|
|
|
prototrak / proto trak plus servo amp assembly
4639 De Soto St. San Diego, CA, 92109- Phone(858) 270-4005. Fax 270-0440-Sales(at)PrattMachine.com. Make: Prototrak/ Prototrak Plus Model: P/N 15047R-PT DC servo AMP unit. Removed from working machine. Parted out the CNC package. Price per each. Two S/N's pictured. Cabinet and transformer do not ship with amp assembly. SWI price is $1046 for a rebuilt unit. Save some money! Please Note: We are a San Diego machinery dealer and all our items are for sale locally. We reserve the right to end any"un bid" listing without prior notification; we however will never do so when negotiations across eBay are open. We appreciate your understanding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PROTO TRAK CNC VERTICAL BED MILL # DPM3 - A.G.E 3
PROTO TRAK CNC BED MILL Model: DPM3/ Year: 1996/ Condition- Excellent Specifications: Table size. 10 x 50 Travels X.Y, Z. 31, 17, 23.5 Quill travel. 5” Spindle taper. NMTB40 Spindle speed range. 70-3950 Spindle center to column. 19” Spindle hp. 3 hp Work piece weight. 1320 lbs Height of table. 38” Max. height head up. 95” Min. height head down. 85” Front print of machine. 24 x 44 Approximate weight. 4.100 lbs Equipped With: Proto-Trak A.G.E 3 controller Power draw bar Glass scale option 220V 3ph Manuals. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Proto-trak EDGE Sharp CNC /Manual Vertical Milling Machine Bridgeport Trak Mill
Up for sale is a SHARP LMV Knee Mill with a PROTOTRK EDGE Control Up for sale is a Sharp LMV Kee Mill with a Prototrak Edge Control. It comes with One Shot Lube System. Chromed Quill, Honed Head, Precision Scraped V Ways on Ram, Ground Table with Coolant Trough. Double Saddle Locks,and Adjustable Ram Gib. Here are the specs: Table Size. 9"x 42" Longitudinal Travel. 30" Cross Travel. 12" Vertical Knee Travel.16" Ram Travel.18" Turret Rotation.360° Spindle Speeds(8)64- 4500 Spindle Taper.R8 Quill Travel.5" Motor.3HP. 220/3/60/460 Weight.2.300lbs. This machine has great features to help you be productive without the bells and whistles that make other CNCS more complicated. There are 19 different math helps are available for you to quickly and easily calculate intersections. Points of tangency centers and ... moremore. The most useful features of a DRO are available with the added plus of ballscrews for smooth positive control and motors for jogging. This will be a great machine even if you have never used a CNC before. You can learn the ProtoTrak Edge in a couple of hours. I am including a Self- Training Manual. It is easier to learn and to make parts on a ProtoTrak Edge than it is to use a DRO. You can create part libraries. Safegaurd part programs or share programs between other ProtoTrak machines. I would be happy to demo the machine. If you have an questions please me at 612-803-5414 This is a great machine with everything in great working order and ready to make parts. Can help buyer arrange loading and shipping. Happy Bidding!
|
|
|
9 X 42 BRIDGEPORT CNC VERTICAL MILL,PROTO TRAK PLUS 2 AXIS CONTROL
THIS IS A 9 X 42 BRIDGEPORT 2 HP VERTICAL MILLING MACHINE WITH A PROTO TRAK PLUS 2 AXIS CONTROL. THERE IS A PROBLEM WITH THE REAR CONTROL BOX. I CHANGED OUT THE FRONT CONTROL BOX AND MADE NO DIFFERENCE. FAULT STILL CAME CAME UP.THIS IS A GOOD RUNNING MANUAL MILL WITH 3 AXIS DRO AND BALL SCREWS. IF YOU HAVE ANY QUESTIONS CALL GERRY AT 727-547-0616, FOR SHIPPING QUOTES CALL TINA AT 727-362-8318. I ALSO SELL NEW BRIDGEPORT CLONES AND 3 AXIS RETROFITS. THANKS FOR LOOKING On Apr-30-13 at 21:48:24 PDT. Seller added the following information:
|
|
|
SEIKI-XL CNC VERTICAL MILLING MACHINE 3VH Proto Trak MX2 (27008)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 27008. SEIKI-XL CNC VERTICAL MILLING MACHINE MODEL: 3VH SERIAL NUMBER: 4935 Year: 1987 GENERAL SPECIFICATIONS Table. Working Surface: 10" x 50" Longitudinal Travel: 36" Cross Travel: 16" Vertical Travel: 16" Quill Travel: 5" Diameter of Quill: 3-3/8" Spindle Taper: R-8 Spindle Speeds. Variable: 60 to 4200 RPM Spindle. Power Feeds: 3) 003, 006, 0015 EQUIPPED WITH 3 HP Spindle Motor. 1720 RPM 220/440/60/3 Quill Micrometer Proto Trak MX2(M/N 15814R) One Shot Lubrication 6" Kurt Milling Vise Trico Spray Master Lube Shipping Dimensions 56" x 60" x 83" Tall Approximate Weight: 2600 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW ... moreBEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the custo
|
|
|
lagun milling machine FTV-2S With 2 Axis CNC Proto Trak Plus No Reserve
lagun milling machine FTV-2S With 2 Axis CNC Proto Trak Plus was not a production machine Came from A toolroom of a large corporation* 10″x50″ X-Axis Table* 3 HP. 220/440 v. 3 Phase* R-8 Spindle* Integrated Coolant System* Hardened Ways* Boxed Ways. Loading fee 150.00.
|
|
|
Pristine Webb 4VK 10x50 2 Axis CNC Mill w/Proto Trak MX2 Controls All tooled up!
Webb 2 Axis CNC Mill with Proto Trak MX2 controls Model 4VK s/n 8U6318 Year: 1991 3HP Motor 230V 3ph FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 Equipped with: 10" x 50" table Square ways on knee and saddle Bridgeport right angle head Bridgeport Quillmaster head 10" horiz/Vert rotary table Complete set of Lyndex R8 collets Criterion head Kurt 3600V mill vise Albrecht keyless chuck Hardinge 5C Indexer Chrome ways Boring bars Absolutely perfect condition. Manuals included Over $25.000 if purchased new! This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: ... morerigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate are additional charges. Item may be picked up and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged to check out this machine under power at our Phoenix facility. Please contact us for an appointment.
|
|
|
2001 Proto-trak EDGE Sharp CNC Vertical Milling Machine Bridgeport Trak Mill
Update: I have been getting questions about the machine so I have added a nice 4" vise. Drastically dropped the price and included some new photos. I am selling a Sharp Prototrak Edge Control Knee Mill. It comes with a One Shot Lube System. Chromed Quill, Honed Head, Precision Scraped V Ways on Ram, Ground Table with Coolant Trough. Double Saddle Locks,and Adjustable Ram Gib. SPECIFICATIONS: Table Size. 9"x 42" Longitudinal Travel. 30" Cross Travel. 12" Vertical Knee Travel.16" Ram Travel.18" Turret Rotation.360° Spindle Speeds(8)64- 4500 Spindle Taper.R8 Quill Travel.5" Motor.3HP. 220/3/60/460 Weight.2.300lbs. To see this machine live in action you can call me at 612-803-5414 This is a great machine with everything in good working order and ready to make parts. I am selling it because I no longer ... morerun a machine shop and need to make space for the owner of the building. This machine is just waiting to start making parts again. Run the machine and make chips. Don't miss out on this opportunity to own this great machine first before someone else snags it up. Bid on it now and take the first step today to start making parts! I can help the buyer arrange loading and shipping. Happy bidding and good luck!
|
|
|
Vertical Mill CNC ACRAMILL Southwestern Industries AM2V Proto Trak
26" x 12" x 5" ACRAMILL Southwestern Industries AM2V Proto Trak CNC Vertical Mill(1994) Specifications Table working capacity: 9" x 42" X Axis Travel: 26" Y Axis Travel: 12" Z Axis Travel: 5" Taper in spindle: R-8, Spindle Speeds: 75-4200 RPM, Main Motor Drive: 3 HP, Equipped with: Southwestern Industries Proto Trak 3 Axis CNC Control. Kurt Power Draw Bar, Machine being sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13f9d76d643-0xe7-
|
|
|
Reconditioned: Bridgeport Proto Trak Plus 2 Axis CNC 3 Milling Machine 48" Table
2 axis CNC 3 axis readout 220/440 3 phase 2HP 48″ resurfaced table Bijur 1 shot lube system Re-scraped knee ways All gibs refitted New head bushings New way wipers and new paint Teflon coated saddle ways Remote start button Program and operating manual from Southwestern Industries. Can be inspected anytime under power*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 Ask for Joe
|
|
|
2007 TRAK #K3SX CNC MILL - PROTO-TRAK SMX CONTROL
PROTO TRAK CNC MILL- 10 X 50- PROTORAK SMX CONTROL YEAR- 2007- MODEL K3SX. EQUIPPED WITH PROTORAK SMX CONTROL, 3-AXIS ACU-RITE GLASS SCALES, SCALE FEEDBACK, KNEE POWER FEED, PROGRAM SPINDLE CONTROL, HALOGEN WORK LIGHT, CHIP PAN, FEATURES WAY SURFACE TYPE– DOVETAIL X. Z; SQUARE Y, CHROME HARDENED AND GROUND QUILL, MEEHANITE CASTINGS, SLIDE WAYS ARE TURCITE COATED, WIDE WAY SURFACES ARE HARDENED AND GROUND, SPECIFICATIONS TABLE SIZE: 50″ X 10″ MAXIMUM WEIGHT ON TABLE: 750 LBS, TABLE TRAVEL: 32″ SADDLE TRAVEL: 15.5″ KNEE TRAVEL: 16″ RAM TRAVEL: 24″ MAXIMUM QUILL TRAVEL: 5″ QUILL DIAMETER: 3-3/8″ SPINDLE TAPER: R8, SPINDLE MOTOR: 3 HP, SPINDLE SPEED RANGE. LOW: 400– 600 RPM, SPINDLE SPEED RANGE. HIGH: 300– 5,000 RPM, MAXIMUM RAPID FEED: 100 IPM, HEAD TILT: 45° FORWARD AND BACK. 90° LEFT AND RIGHT, CONTROL ELECTRICS: 110 VOLTS. 1 PH, ... moreMACHINE ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, MACHINE WEIGHT: 2.816 LBS, MACHINE DIMENSIONS: 71″ LR X 59″ FB X 84″ H, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
2000 SWI PROTO-TRAK DPM3 CNC BED MILL - A.G.E. 3 CONTROL - TOOLING
SWI TRAK DPM 3 AXIS CNC BED TYPE MILL- AGE 3 CONTROL NEW- 2000/ MODEL DPM SPECIFICATIONS TABLE SIZE: 10” X 50” TABLE LOAD CAPACITY: 1.760 LBS. X-AXIS TRAVEL: 31” Y-AXIS TRAVEL: 17” Z-AXIS TRAVEL: 25” SPINDLE CENTER TO COLUMN FACE: 17.3" HEAD SWIVEL RIGHT AND LEFT: 90. QUILL FEEDS(3) 0.002. 0.004, 0.006 IPR. QUILL TRAVEL: 5" SPINDLE MOTOR: 3 HP. SPINDLE SPEED RANGE: 70– 4.200 RPM. SPINDLE TAPER: 40 NST. GENERAL MACHINE DIMENSIONS: 72” LR X 66” FB X 89” H. MACHINE WEIGHT: 4070 LBS ELECTRICS: 220 VOLTS. 3 PH, 60 CYC. EQUIPPED WITH MANUAL OR CNC OPERATION. TRAK AGE 3-AXIS CONTROL. POWER DRAWBAR. 8” KURT VISE. AUTO LUBE MISCELLANEOUS TOOLHOLDERS. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Lagun FTV-2 Vertical Mill with Proto Trak AGE2 with MX2 Monitor
Fully functional Lagun FTV-2 with 4" Riser block and Kurt Power Drawbar with Prototrak AGE2 control with MX2 Monitor. All in great condition and fully operational. Lovingly restored by Veterans of the U.S. Armed Forces to support Workshops for Warriors and their mission to train. Certify, and place Veterans and Wounded Warriors into manufacturing careers. 100% of all profits go to support Workshops for Warriors Please visit them at www.workshopsforwarriors.org Machine Specifications: 50″ wide by 10″ deep(50" x 10" Table) Table Dimensions-3 HP. 220/440 v. 3 Phase-R-8 Spindle-Newall Scales X and Y axis-4" Riser block for machining extra tall stock-Air Powered Kurt Powered Drawbar-Integrated Coolant System(unknown working condition as it is missing the spout that goes from the column to the table and ... morewe have not tested it) Hardened Ways-Boxed Ways Normal 0 false false false EN-US X-NONE X-NONE Video of Machine in Operation Video of Digital Readout in Z in operation Video of Digital Readout in X in operation Video of Digital Readout in Z in operation Video of Digital Readout in Z in operation Local pickup is encouraged. But we will crate and ship anywhere in the world. The machine weighs roughly 2.500 pounds and measures(without a crate) 96" tall by 72" wide by 72" deep. Due to the number of requests for quotes, we cannot provide shipping quotes expect to the winning buyer. Locals are welcome to arrange for a viewing on Friday the 16th of August or Saturday the 17th of August. No questions asked 14 day return policy with shipping and crating charges paid for by the buyer. Machine must be returned in the same condition it was sent out. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lagun Vertical Multiaxis CNC Mill machine with Proto Trak AGE2 and MX2 Monitor
Fully functional Lagun FTV-2 CNC Mill with 4" Riser block and Kurt Power Drawbar with Prototrak AGE2 control with MX2 Monitor. All in great condition and fully operational. We ahve new Haas and Prototrak CNC mills and lathes. Flow International CNC waterjet, Betenbender shears and brakes, Scotchman ironworkers and coldsaws, and HE&M saws and just do not have the room for this machine. Lovingly restored by Veterans of the U.S. Armed Forces to support Workshops for Warriors and their mission to train. Certify, and place Veterans and Wounded Warriors into manufacturing careers. 100% of all profits go to support Workshops for Warriors. Please visit them at Video of Machine in Operation Video of Digital Readout in Z in operation Video of Digital Readout in X in operation Video of Digital Readout in Y in operation If paying by AMEX. A ... more3% handling fee will be charged. Forklift available onsite and we will load for $100 onto your flatbed or trailer(up to 1 hour) Local pickup is encouraged. But we will crate and ship anywhere in the world. The machine weighs roughly 2.500 pounds and measures(without a crate) 96" tall by 72" wide by 72" deep. Due to the number of requests for quotes, we cannot provide shipping quotes expect to the winning buyer. Locals are welcome to arrange for a viewing on Friday the 30th of August or Saturday the 31th of August. No questions asked 14 day return policy with shipping and crating charges paid for by the buyer. Machine must be returned in the same condition it was sent out. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTHWESTERN INDUSTRIES PROTO TRAK CNC BED MILL "WILL SHIP THIS ITEM"
SOUTHWESTERN IND. No. DPM-V3, PROTOTRAK VM, POWER DRAW BAR, 3-AXIS, S/N 0448J13006, NEW 8/12/2004 Our stock number: 1976 Click on picture below for larger version ALL AVAILABLE MANUALS*TEMPORARY SPECIFICATION. SUBJECT TO CHANGE* NOTE WE WILL SHIP THIS ITEM"
|
|
|
Proto Trak K3 Vertical Milling Machine
1999 Proto Trak K3 Vertical Milling Machine with a Trak AGE2 Controller. comes equipped with glass scale on the X and Y axis. Power draw bar and power knee lift. serial# 99-0563 asking $5.500.00. Machine is under power in our facility Call Mark@ 603-524-7622.
|
|
|
2000 SOUTHWESTERN PROTO-TRAK DPM3 CNC BED MILL - Proto-Trak A.G.E 3
SOUTHWESTERN PROTO-TRAK CNC BED MILL YEAR: 2000/ MODEL: DPM3 Specifications: Table size. 10 x 50 Travels X.Y, Z. 31, 17, 23.5 Quill travel. 5” Spindle taper. NMTB40 Spindle speed range. 70-3950 Spindle center to column. 19” Spindle hp. 3 hp Work piece weight. 1320 lbs Height of table. 38” Max. height head up. 95” Min. height head down. 85” Front print of machine. 24 x 44 Approximate weight. 4.100 lbs. Equipped With: Proto-Trak A.G.E 3 controller Power draw bar Glass scale option 220V 3ph Manuals. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
SWI PROTO TRAK Bridgeport digital readout southwestern travel trav a dial
Selling a collection of digital readout parts. 3) SWI Trak reader heads. All work and are smooth, look very clean and cables are good, looks like very little use. 3) Mounting brackets. One looks like it is for the quill on a bridgeport type machine, the other two have covers with them, probably X& Y. 2) 2 axis readouts. One works good with above reader heads, seems to be set for Diameter(reads twice the distance moved) The other readout just flashes when powered on, seems like the buttons don't do anything, or are stuck. Only have one power cord for the readouts. Sold As Is. Please ask before bidding Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1995 Proto-Trak TRM 2 Axis CNC
Pre-Owned Prototrak 2 Axis CNC Bed Mill Excellent Condition! Ran very Low Hrs. Questions call Robby@ 866-803-5202 Shipping Quotes Contact Specifications: Table Size. 10" x 50" Longitudinal Travel. 30" Cross Travel. 17" Vertical Travel. 23" Quill Travel(Manual) 5" Spindle Motor. 3 H.P. Spindle Taper. R-8. Spindle Speeds. 70-4200 RPM. Table Load. 1.320 Lbs. Machine Weight. 4.100 Lbs. Equipped With: Prototrak MX2 Full Conversational Control. One Shot Lubrication. Power Draw Bar. Quill Z Axis Feedback. Way Covers 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-141c3f7030d-0x100-
|
|
|
BRIDGEPORT & OTHER 9" x 42" TWO-AXIS CNC MILLING MACHINE - PROTO TRAK CONTROL
aims BRIDGEPORT& OTHER 9" x 42" TWO-AXIS CNC MILLING MACHINE- PROTO TRAK CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Body is made in the U.S.A. by Bridgeport Machines Inc. of Bridgeport. Connecticut. the head seems to be an import type variable speed head. It has no manufacturer name or markings. This is a used 2-Axis CNC Vertical Milling Machine in GREAT condition. Body Serial# 12/BR 43935 Coming out of a one man mold& die prototype shop. A true craftsman. Everything this tool& die maker owned was very well taken care of and shows very little wear compared to a production shop. Be sure and check out our other auctions for some of the best names in tooling like: DoAll, Bridgeport, Mitutoyo, Suburban, Hardinge, Tapmatic, ... morePrecision Plates& Fixtures he made, and much more! Most of the items are exceptionally clean. All items are NO RESERVE and NO MINIMUM. Everything will sell at end of auction, so be sure to get your bids in! Good Luck! Features: Sturdy. Coreless cast table, heavily ribbed for strength. Precision ways on column. Knee and table. Tapered, hand-scraped gibs, hand-fitted for long life accuracy. Locking clamps let you mill mild steel at 2 cu. in.min. with minimum vibration. One piece column and base with extra ribs and webs. Dual saddle and knee locks. Satin chrome-plated dials. SWI Proto Trak Plus 3-Axis DRO/ 2-Axis Control. 2-Axis CNC Operation. Servo Power Feed on Knee. Bijur Lubrication System. Mitutoyo Digimatic Scale on Quill. Specifications: Table: Overall Size: 42" x 9" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Table Load: 750 lbs. Height Above Floor: 47.25" Travels: Table Travel(X-Axis) 30" Saddle Travel(Y-Axis) 12" Knee Travel(Z-Axis) 16" Quill Travel: 5" Ram Travel: 12" Spindle: Throat Distance: 6.75"min. 18.75" max. approx. Table to Spindle Nose: 2.5" min. 18.25" max. approx. Spindle Diameter: 1.875
|
|
|
Southwestern Indusries Proto Trak DPMSX 3
DPM SX 3. Like New! wont find a chip on it. Table never used. Sub Plate you see) Loaded with options! Includes: Advanced Features Tracking/ electric Hand-wheels DXF File converter Power Draw Bar Network and memory Remote stop and go switch Chip Tray and splash guard. Like all TRAK SX Bed Mills. The DPM SX3P features: ProtoTRAK SMX CNC A solid ram that moves along the column providing mass for heavy cuts Generous Z-axis CNC travel Strong and rigid construction Real handwheels for manual control Two or three-axis CNC operation. Your choice Programmable spindle speeds Precision ground ballscrews installed in the table. Saddle and column Manual quill with integrated quill and ram encoders Wide way surfaces are hardened and ground. Slideways are Turcite® coated With these important differences: 5 hp spindle motor NMTB40 spindle taper and ... morealmost 4" quill diameter Travels X. Y and Z: 31"x17"x23.5" Sold as is where is. We Can load it. Call 918-894-8001 for freight or questions. Posted with
|
|
|
2011 Southwestern Industries Proto Trak LPM CNC Vertical Machining Center Mill
2011 Southwestern Industries Trak LPM CNC Vertical Machining Center Specifications: Control. Proto Trak PMX. X Axis Travel. 31" Y Axis Travel. 18.5” Z Axis Travel. 21” Table Size. 35-3/8" x 19-5/8" Max. Table Load. 1.000 Lbs. Spindle Motor. 15 HP. Spindle Speeds. 8.000 RPM. Spindle Taper. CT 40. ATC. 16. Equipped With: Proto Trak PMX Control. DXF File Converter. 12 Ball Lock Liners Primary/Secondary. Fixture Fence Stop Plate. 4 Mic 6 Jig Plates. Chip Auger. Please contact Jason Stob 708 790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code ... morehere is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) mak
|
|
|
southwestern industries cnc proto trak LX2 lath 1745 / 3 jaw chuck/aloris holder
You are bidding on 1 used southwestern LX2 1745P lath. I purchased it new in 1999 and have used it for proto type work mostly brass and alumni. No production work. I have not had any trouble with the lath the hole time I have owned it. I have done all of the maintenance on the lath from day one. It comes with all of the manuals, leveling block, coolant pump, hard and soft jaws, barman's 10 inch Sweden 3 jaw chuck, Aloris 4 position tool holder, 8 tool holders and tail stock. The lath runs and cuts just fin and there is nothing to do to it but hook it up and start cutting. Take a look at all of the photos and if there is any questions about anything just pick up the phone and call me. I'm not a Machine tool sales guy, I'm the end user. 815 979 3428 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144e0da36e0-0x102-
|
|
|
Proto Trak Two Axis CNC Control Head / Pendant
Proto Trak Two Axis CNC Control Head/ Pendant. Works. I bought this on eBay a couple of years ago as a spare for a system that I no longer have. When I got it. I plugged it in and gave it a thurough going over and found no problems. The unit shows its use, but did work when removed. This was made by SouthWest Industries. I will ship this item worldwide. Keywords: Harley J F FD FE JDCA JDCB FH 61 74 45 21 30.50 JD JE JDH D DL DLD R RL RLD A AA B BA C CM V VL VLD VLH VLHS U UL ULH FL E EL FLH FLHT W WL WLD WLDR WLA WLC Panhead Knucklehead Speedometer Stewart Warner Corbin Johns Manville Flat Head Flathead two cam part nos new indian henderson ace pope cleveland tool book part accessory bosch zev ze1 schebler carbide motorcycle fhead prestolite Prest-o-lite linkert magneto 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 ... more1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Powered by
|
|
|
1991 BRIDGEPORT VERTICAL MILL - REBUILT - 2 AXIS PROTO-TRAK / Z AXIS DRO
BRIDGEPORT VERTICAL MILL New 1991- Model: Series I Table Size: 9" x 48" Table Travel: 36" Saddle Travel: 12" Knee Vertical Travel: 16" Quill Travel: 5" Spindle Nose to Table: 2-1/2" Min. and 18-3/4" Max. Max. Distance Center of Spindle to Column: 18-3/4" Spindle Speeds. Variable: 60 to 4200 RPM. Spindle Taper: R8. 3) Quill Power Feeds: 0015. 003 and.006 TPR. Head Tilts Left& Right 90 Degrees. Head Tilts Front& Back 45 Degrees. EQUIPPED WITH: Hard Chrome Knee Ways. Prototrak Plus 2-Axis Conversational Programmable Control with. Z-Axis DRO on Quill. Work Light. 2 HP Motor. Wired 3 Phase, 60 Cycle, 220/440 Volts. Presently Wired 220 Volts. Vari Speed Drive Rebuilt. New Vari Speed Drive Belt. New Motor Sheave. New Bushings in Vari Speed Sheave. 4) New Bearings in Top of Head. Rebuilt Power ... moreSupply in Prototrak Control. DIMS Overall Dimensions: 66" L-R x 60" F-B x 82" H. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
BRIDGEPORT MILL / 2 AXIS PROTO TRAK PLUS WITH VIDEO
HERE IS A DECENT RUNNING BRIDGEPORT MILL WITH A 2 AXIS PROTO TRAK PLUS CNC CONTROL. TABLE SIZE 9"X42" TABLE. HEAD SOUNDS GOOD. QUILL POWERFEED WORKS FINE. I FOUND NO GLITCHES. THERE IS ONE SMALL DING HOLE ON THE FACE OF THE PROTO TRAK PANEL BUT NOT A PROBLEM. WILL LOAD ON YOUR TRUCK NO CHARGE, OR CAN SHIP FOB LTL BUYER PAYS FREIGHT. ANY QUESTIONS CALL BILL 317-638-4100 EMAIL MACHINERYMARTINC@AOL.COM INDIANAPLOLIS, IN. MACHINE IS CUTTING A POCKET. CLICK ON LINK TO VIEW VIDEO
|
|
|
PROTO TRAK CNC MILLING MACHINE 2 AXIS BALL SCREWED WITH SERVOS NICE MACHINE
ALLIANT PROTO TRAK 9 X 49 60 TO 4500 RPM SPINDLE R 8 TAPER CRHOME HARDNED WAYS BALL SCREWS ON SERVO DRIVES 0 BACK LASH 1 SHOT LUBE 6.1 SOFTWARE ALSO HAVE A RS232 OUT SO YOU CAN USE YOUR PC INSTEAD OF SCREEN CONTROL MACHINE WAS JUST REMOVED FROM SERVICE WORKS GREAT GOOD HEAD THE RS232 WAS UPGRADED BECAUSE THE MONITOR WOULD GO OUT AND ON SO INSTEAD OF BUYING A MONITOR FOR 400.00 WE INSTALLED A RS DRIVE NOW CAN BE USED WITH DIFFERENT ART TO PART SYSTEMS INSTEAD OF POINT TO POINT CONTROL VERY SMOOTH OPERATING UNIT AGAIN THIS IS BALL SCREWED WITH SERVOS NO JUNK STEPPERS WILL SHIP WORLD WIDE NO RESERVE OR BUY IT NOW PLEASE SEE MY OTHER METAL WORKING ITEMS THANKS DAVE 248 875 2089
|
|
|
BRIDGEPORT EZ TRAK PLUS Servo Motor Drive Ez-trak Proto 14969 4020d-143 LOW HRS
This sale is like new DC servo motor removed from a Bridgeport EZ- Track Plus machine. The machine it was removed from hed extremely low hour. This unit comes with a 90 day warranty. If you have any questions or would like to make an offer please call or text me at 573-578-9890 Posted with
|
|
|
SWI 2010 CNC PROTO TRAK MILLING MACHINE SOUTHWEST INDUSTRIES
ProtoTRAK Sport K3 knee mills. 2 axis, DRO 3 axis. M2 Control, Kurt Power Draw Bar, One shot lube for table. Table 10 x 50" Remote Stop/Go. Work Lamp. Table Travel 32" Saddle Travel 16" Knee Travel 16" Ram Travel 15" Maximum Quill Travel 5" Quill Diameter 3-3/8" Spindle Taper R8. Vari-Speed Spindle 60-4200 RPM. Max table weight 850 lbs. Year New: 98/2000, Serial# State or Province: MA, Country: United States, Machine Condition: Used Very Good, Short Description: Southwestern Industries ProtoTRAK Sport K3. 2-axis knee mill, M2 control, 3HP. 2) mill package. Category: Machining Centers- Millers, Machine Type: Knee. CNC, City: Brand Name: Southwestern Industries, Asset Tag: Voltage: 208/220, Amperage: Machine Hours: N/A Horse Power: 3, Number of Axis: 2, Dist Between Centers: Tooling Included: No Under Power ... moreor Operable: Yes Electric Foot Switch: No Coolant System: No Maint Record: No Digital Read Out: Yes RPM: 60-4200 Controls: TRAK M2, Machine Size(H/L/W) 84" 71" 54" Machine Weight: 2800, Size of Worktable: 10 x 50, Max Weight of Work Piece: 850,
|
|
|
2012 Southwestern Industries Trak DPM-3 CNC 3 axis Vertical Mill Proto-Trak Cont
2012 Southwestern Industries Trak DPM-3 CNC 3 Axis Vertical Milling Machine Specifications: Table Size.10" x 50" X-Axis Travel.31" Y-Axis Travel.17" Z-Axis Travel.23.5" Quill Travel.5" Spindle Taper.40 NMTB. Spindle Speed Range.Up To 5.000 RPM. Spindle Motor.5 H.P. Spindle Center To Column Face.19" Maximum Table Load Capacity.1.320 LBS. Approximate Machine Weight.4.100 LBS. Equipped With: Proto-TRAK SMX 3-Axis CNC Control. SMX Advanced Features. Coolant Pump. Chip Tray and Splash Shield. Hardened& Ground Box Ways. Power Draw Bar. Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally ... moreat our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Cra
|
|
|
SEIKI-XL CNC VERTICAL MILLING MACHINE 3VH Proto Trak A.G.E. 2 very close to MX2
Sieki-XL Mill Mfg date 1988 Control is 1996 Kurt Power Drawbar With Southwestern industries prototrak cnc Controller A.G.E. 2. This machine is in nice shape it has a 10 x 50 table which has a couple marks however overall in nice shape. This machine is wired 220 three phase with a 3 hp motor and R-8 Taper the control is 115 volt single phase. Thank you for your Business! Can ship for you! God Bless! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-146bfc6f491-0x107-
|
|
|
2012 Trak 1630SX, Trak Lathe 16"x 30" with Proto Trak SLX ....PRICE REDUCED...
Trak 1630SX Trak Lathe 16"x 30" with Proto Trak Like all TRAK SX Lathes. The TRL 1630SX features: ProtoTRAK SLX CNC, Manual or CNC operation, Electronic handwheels and jogstick, Inverter-duty spindle drive, Programmable spindle speeds, Optional Constant Surface Speed(CSS) Programming, Optional Inch Per Revolution(IPR) Programming, Optional TRAKing for manual control of CNC programs, Optional Indexer for automatic tool changes, With these important differences: 16” Swing. 30” between centers, Spindle through hole of 2.12” Ideal for small parts. But a generous swing for versatility, At home in a toolroom, Height of Centers-8" Distance between centers-30" Swing over bed-16" Swing over saddle wings-16" Swing over cross slide-8.6" Cross slide travel-8.5" Tool section max 3/4" Coolant tank capacity- ... more9.3 gal. Width of Bed-12.6" Height of Bed-12.6" Spindle Nose(Camlock)D1-6, Spindle through hole-2.12" Spindle taper-MT#6, Taper in reduction sleeve-N/A, Spindle dia at front bearing-3.15" Number of bearings-2, Bearing class(radial round)P5, Spindle speed range(RPM)150-2500, Optional Tailstock Quill travel-6.3" Quill diameter-2.36" Quill taper hole-MT#4, Spindle Motor HP-7.5, Power requirements. Control-110V; 1P; 8 A, Power requirements. Machine-220V;3P;60Hz, Amps full load current-25, Dimensions net- 83 x 40 x 56" Dimensions shipping- 87 x 45 x 67" Weight net- 2.875 lbs. Weight shipping- 3.420 lbs. Maximum rapid feed X- 100, Maximum rapid feed Z- 150, Coolant pump motor-1/8 HP, Spindle motor brake- Dynamic braking, Way surface hardness- 400- 450 HB, Head stock lubrication- Oil bath, Sliding door for easy set-ups, Bedways hardened and ground, Sliding surfaces Turcite coated, Dovetails on cross slide. V-ways on saddle, Adjustable saddle gibs, The ProtoTRAK SLX combines the simplicity and flexibility of manual turning with the essential capability of CNCs for efficiency in small lot. Toolroom work. Advanced Capability Easy Transition between m
|
|
|
Southwestern industries cnc proto trak system for bridgeport milling machine
what we have is a complete proto trak plus system used in excellent working order comes with all of the electronics mounting hardware all motors 2 ball screws x and y its complete for a 48"x 9" table shipping should be around 200 lower 48 states AT END OF AUCTION PLEASE CONTACT US FOR PAYMENT INSRTUCTIONS PAYMENT WILL BE MADE WHEN MACHINE IS PICKED UP IN PERSON IF YOU CANT MAKE IT DOWN WE CAN HELP WITH THE SHIPPING, CHECK OR MONEY ORDER NO OTHER PAYMENT PLEAD DONT BID IF YOU DONT UNDERSTAND INSRTUCTIONS, PLEASE SPEAK TO ADAM BRENNER HE IS OUR REP DO NOT SPEAK TO ANY OTHER PERSON BUT ADAM AT EXT 1702) 1 800 323 5441) g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146e000538c-0x108-
|
|
|
10856 SWI TRAK K3 Edge CNC Knee Mill, Proto Trak, Prototrak, 50" x 10" Table, 04
2004 Southwestern Industries TRAK K3 Proto Trak Edge CNC Vertical Knee Mill Asset# 10856 Serial# 041AF12652 Control: Proto Trak Edge Year: 2004 Specifications: Table Size. 50" x 10" Travels. 32" x 15.5" x 16" Ram Travel. 24” Quill Travel. 5” Spindle Taper. R8 Spindle Speed Range. 60-4200rpm Spindle Motor. 3hp Max. Weight on Table. 750lbs. Machine Weight. 2800lbs. Features: 2-Axis CNC. X and Y Axis Acu-Rite Quill Reader Power Draw Bar R8 Taper Spindle Proto Trak Edge Control Specifications and Features are Subject to Buyer Verification Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment ... morePayment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or entire plants Please feel free to call or
|
|
|
2003 SOUTHWESTERN INDUSTRIES PROTO-TRAK TRL1745S CNC / MANUAL LATHE
SOUTHWESTERN INDUSTRIES PROTO-TRAK TRL1745S CNC/ MANUAL LATHE- PROTO-TRAK SL 2-AXIS CNC CONTROL YEAR: 2003 SPECIFICATIONS CAPACITIES HEIGHT OF CENTERS: 8-7/8" DISTANCE BETWEEN CENTERS: 45" SWING OVER BED: 17-11/16” SWING OVER SADDLE WINGS: 16-1/8” SWING OVER CROSS SLIDE: 10-15/32” CROSS SLIDE TRAVEL: 9” TOOL SECTION MAX. 1” X 1” BED BED WIDTH: 12" BED HEIGHT: 11-1/2" HEADSTOCK SPINDLE NOSE: CAMLOCK D1-6 SPINDLE THROUGH HOLE: 2" TAPER IN REDUCTION SLEEVE: MT#4 SPINDLE DIAMETER AT FRONT: 3.15” NUMBER OF SPINDLE SPEED RANGES: 12 SPINDLE SPEED RANGE: 40 TO 2.200 RPM TAILSTOCK QUILL TRAVEL: 6-1/4" QUILL DIAMETER: 2-5/16" QUILL TAPER HOLE: MT#4 MOTORS SPINDLE MOTOR: 7.5 HP COOLANT PUMP: 1/8 HP GENERAL DIMENSIONS: 9’5” LR X 4’ FB X 6’ H ELECTRICS: 230 VOLTS. 3 PH, 60 CYC EQUIPPED WITH PROTO-TRAK SL 2-AXIS CNC CONTROL ... more8" 6-JAW CHUCK QUICK CHANGE TOOL POST STEADY REST REMOTE STOP/GO SWITCH WORKLIGHT HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING*
|
|
|
Southwestern Proto Trak CNC bed mill DPM 3 axis milling machine
SOUTHWESTERN INDUSTRIES PROTOTRAK DPM3 CNC 3-AXIS VERTICAL BED MILL/ TRAK AGE-3 NEW: 1998 SPECIFICATIONS TABLE SIZE: 10” X 50” TABLE LOAD CAPACITY: 1.760 LBS X-AXIS TRAVEL: 31” Y-AXIS TRAVEL: 17” Z-AXIS TRAVEL: 25” SPINDLE CENTER TO COLUMN FACE: 17.3" HEAD SWIVEL RIGHT AND LEFT: 90 ° QUILL FEEDS(3) 0.002. 0.004, 0.006 IPR QUILL TRAVEL: 5" SPINDLE MOTOR: 3 HP SPINDLE SPEED RANGE: 70– 4.200 RPM SPINDLE TAPER: 40 NST SPINDLE NOSE TO TABLE: 0-25” SPINDLE CENTER TO COLUMN: 17.3” GENERAL MACHINE DIMENSIONS: 72” LR X 66” FB X 89” H MACHINE WEIGHT: 4070 LBS ELECTRICS: 220 VOLTS. 3 PH, 60 CYC EQUIPPED WITH MANUAL OR CNC OPERATION TRAK AGE 3-AXIS CNC CONTROL POWER DRAWBAR AUTO LUBE Spray mist We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172.
|
|
|
Bridgeport Proto Trak Plus with 48" Table and Kurt Vise
Bridgeport Series I. ProtoTRAK Plus 2-axis CNC Vertical Mill. Year 1991 Specifications: Table Travel(X) 30" Saddle Travel( Y) 12" Quill Travel(Z) 5" Knee Travel 16" Table 9" X 48" 2 HP Variable Speed Head R-8 Taper Spindle Automatic Lubrication New 2HP Motor TRAK PLUS 2-Axis Control with 3 Axis Digital Readout in Manual Mode. Condition: Head refurbished 2014 Please call 203-592-8402
|
|
|
R-8 Right Angle Milling Attachment, Fits Bridgeport, Proto Trak Mill - Gem Power
You are bidding on an R-8 Right Angle Milling Attachment that will fit most manual knee mills. It is in very good condition. The handle on the box is missing but the latch works great. Seller reserves the right to end this listing as the item is also for sale locally.
|
|
|
SWI PROTO TRAK TRL 1440P LATHE 14" X 40" W/ LX2 CONTROL
Welcome to Select Machine Tool Item Description: Southwestern Industries Proto trak TRL 1440P Lathe w/ LX2 Control SPECIFICATIONS: Serial No. 99-415. § Capacity: § Height Of Centers 7 § Distance Between Centers 40” § Swing Over Bed 14” § Swing Over Saddle Wings 13-3/16” § Swing Over Cross-Slide 7-13/16” § Cross-Slide Travel 8” § Tool Section Max 3/4” § Coolant 2.5 Gallons § Bed: § Width 10” § Height 10-1/4” § Headstock: § Spindle Nose(Camlock) D1-5 § Spindle Through Hole 1-5/8” § Taper In Reduction Sleeve MT-4 § Spindle Diameter/Front Bearing 2.76 § Number Of Spindle Speeds 18 § Spindle Speed Range(RPM) 35-2400 § Tailstock: § Quill Travel 5-1/2” § Quill Diameter 1-7/8” § Quill Taper Hole MT-3 § Motor Main: § Hp 2.5/4.5 ... more§ Volt 220 § Phase/Hz 3/60 § Dimensions 78”L x 33”W x 56”H § Weight 2000 lbs. § Volt 220 § Phase/Hz 3/60 § Dimensions 78”L x 33”W x 56”H § Weight 2000 lbs. CONTROL HARDWARE: § Slip Clutches On X And Z To Prevent Damage From Crashes § Digital Servo Amplifiers Custom Designed For LX2 Operation § 115-Volt/ 1-Phase/ 60Hz; 8 Amps Full Load Current § Closed Loop Feedback With Encoder Resolutions Of 0.00005” On The X And 0.0001” On The Z § 486 PC-Based Processor § D.C. Servo Motors Rated For Maximum Continuous Torque At 280 In-Oz. For The X And 575 In-Oz. For The Z Are Twice That Required § Rapid Travels Are 100 IPM For X And 150 IPM For Z § Ground Ballscrews In The Saddle And Cross Slide For Smooth. Accurate Contours Without Backlash § Modular Design Simplifies Service And Maximizes Uptime § Feedrate Override Of Programmed Feedrate And Rapid § Polycarbonate Sealed Membrane Keypad And Gasket-Sealed § Enclosures To Lock Out Contamination § 9” CRT For Clear Presentation Of Prompts. Status Information, And Part Graphics § Jogstick For Convenient Jog At Rapid Travels § RS23
|
|
|
PROTO TRAK MILLING MACHINE RETROFIT
THIS IS A GOOD MACHINE FOR A KIT ALL THE ELICTRONICS ARE MISSING WHAT YOUR GETTING IS A MILLING MACHINE WITH GOOD BALL SCREW AND SERVO MOTOR PAYMENT WHEN MACHINE IS PICKED UP NO ONLINE PAYMENTS LOCAL PICKUP WE CAN HELP ARRANGE SHIPPING IF YOU NEED HELP THIS IS SURPLUS MACHINERY WE NO LONGER USE WILL MAKE A GOOD MACHINE FOR SOMEONE THAT NEED ONE PLEASE CONTACT US IF YOU NEED MORE DETAILS I WOULD BE MORE THEN GLAD HELP YOU OUT ON THIS MACHINE WOULD LIKE TO FIND A GOOD HOME FOR IT I THINK WE PRICED IT PRETTY LOW MACHINE ALL AMERICAN MADE THEY CALL THIS A TRAY TOP I CALL IT A WORK HORSE
|
|
|
SHARP 10"x50" 3-AXIS PROTO TRAK CNC KNEE MILL - MILLING MACHINE
ebay template SHARP 10"x50" 3-Axis CNC Vertical Knee Mill I TEM P ICTURED IN USE Previously used by owner for one production job until that job was no longer needed. Current user is looking to decrease shop space and this machine is first in line. Please call to check for availability of this machine. Ask for Jerad(818) 718-6734 FEATURES 3-Axis CNC Proto Trak Control Hardened& Ground& Turcite Coated Square Ways on Saddle Meehanite Casting Power Drawbar One-shot Lubrication System Electrics- 230/460/60/3 Presently 460 Volts SPECIFICATIONS Table size 10" x 50" Longitudinal travel 31.5" Cross travel 15" Vertical travel 14" Spindle taper R-8 Spindle speed 60- 4500 RPM Swivel of head Yes Quill travel 5" Ram travel 21" Quill feed rate 0.0015. 0.003, 0.006 ipr Head swivel R& L 90º. R& ... moreL Head tilt(Up& Down) 45º Front to Rear Spindle motor 3 HP Net weight 4000 lbs*Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions
|
|
|
PROTO TRAK ENCODER BRIDGEPORT MILLING MACHINE X/Y
CAME OFF WORKING PROTO TRAK
|
|
|
PROTO TRAK STARTER DISCONNECT PANEL ROCKFORD
CAME OFF WORKING PROTO TRAK CSD-721-P1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14725afcb24-0x109-
|
|
|
1999 PROTO TRAK L2 SPORT 1440P
General Specifications: Swing Over Bedways: 14” Swing Over Cross Slide: 6.5” Center Distance: 40” Spindle Speed: 40 ~ 2200 RPM Spindle Bore: 1 3/8” Main Motor: 5 HP Tailstock: Yes Equipped With: Proto Trak L2 CNC Control Aloris Quick Change Toolpost 6” 3-Jaw Bison Chuck Coolant System Auto Lubrication All Available Manuals& Electrical Schematics
|
|
|
1997 PROTO TRAK M3 SPORT B3
SPECIFICATIONS: TABLE SIZE. 10" x 50" TABLE TRAVEL(X) 31" SADDLE TRAVEL(Y) 17" VERTICAL HEAD TRAVEL(Z) 23.5" QUILL TRAVEL. 5" SPINDLE TAPER. 40 NST SPINDLE NOSE TO TABLE. 0-24" SPINDLE CENTER TO COLUMN FACE. 17.3" HEAD SWIVEL LEFT& RIGHT. 90 DEGREES SPINDLE SPEED RANGE. 70- 4.200 RPM QUILL FEEDS(3) 002, 004, 006 IPR MAXIMUM WORKPIECE WEIGHT. 1,320 LBS APPROX DIMENSIONS. 68"W x 64"D x 95"H MACHINE WEIGHT. 4,100 LBS EQUIPPED WITH: TRAK AGE-3 CONTROL, X,Y& Z CNC CONTROL THREE-AXIS SIMULTANEOUS INTERPOLATION INCLUDING HELICAL CANNED CYCLES IN MANUAL MODE 3-AXIS DRO RS232 PORT& FLOPPY DISK DRIVE REMOTE SWITCH QUILL DIGITAL READOUT(Z IS HEAD UP& DOWN NOT QUILL) SQUARE BOX WAYS- HARDENED& GROUND PRECISION BALL SCREWS AUTOMATIC LUBRICATION SYSTEM WAY COVERS TORQUE-RITE POWER ... moreDRAW BAR 3 HORSE POWER SPINDLE MOTOR MANUALS
|
|
|
2003 SOUTHWESTERN INDUSTRIES 10"x50" 3 AXIS CNC MILLING MACHINE / PROTO TRAK VM
For Sale! 32003 SOUTHWESTERN INDUSTRIES 10"x50" 3 AXIS CNC MILLING MACHINE/ PROTO TRAK VM(OC356) Specifications: TRAK DPM v3 10x50. Vertical, Max. 5000 rpm Brand: SOUTHWESTERN INDUSTRIES 3-AXIS CNC VERTICAL BED MILL Model: TRAK DPM v3 10x50 New in 2003 Table Size- 50" x 10" Travel(X. Y, Z axis) 30 x 17 x 21" Quill Diameter- 4.13" Spindle Taper- 40 Spindle Speed Range RPM- Varispeed drive- rpm Spindle Motor Power- vari-speed head- 5 HP Power requirements- 230/60/3 Approx Maximum Weight of Workpiece- 1320 lbs. Height of table from bottom of bed- 38" Approximate Machine Weight- 6400 Lbs. CALL OR EMAIL FOR MORE INFORMATION. 1800 573 7019 General Information: You can preview unit at our warehouse in Southern. California. Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, ... moreWire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Toll Free#1800 573 7019 Text#714 658 5390 Fax#909 989 4107
|
|
|
2006 SOUTHWESTERN INDUSTRIES 10"x50" 3 AXIS CNC MILLING MACHINE / PROTO TRAK VM
For Sale! 2006 SOUTHWESTERN INDUSTRIES 10"x50" 3 AXIS CNC MILLING MACHINE/ PROTO TRAK VM(OC356) Specifications: TRAK DPM v3 10x50. Vertical, Max. 5000 rpm Brand: SOUTHWESTERN INDUSTRIES 3-AXIS CNC VERTICAL BED MILL Model: TRAK DPM v3 10x50 New in 2006 Table Size- 50" x 10" Travel(X. Y, Z axis) 30 x 17 x 21" Quill Diameter- 4.13" Spindle Taper- 40 Spindle Speed Range RPM- Varispeed drive- rpm Spindle Motor Power- vari-speed head- 5 HP Power requirements- 230/60/3 Approx Maximum Weight of Workpiece- 1320 lbs. Height of table from bottom of bed- 38" Approximate Machine Weight- 6400 Lbs. CALL OR EMAIL FOR MORE INFORMATION. 1800 573 7019 General Information: You can preview unit at our warehouse in Southern. California. Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, ... moreWire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Toll Free#1800 573 7019 Text#714 658 5390 Fax#909 989 4107
|
|
|
BRIDGEPORT PROTO TRAK MILLING MACHINE Z AXIS MOTOR KIT
110 VOLTS I CAN NOT SAY THIS IS COMPLETE WHAT U SEE IS ALL I HAVE THERE MIGHT BE PARTS MISSING ON THE MOUNTING PARTS JUST DONT KNOW
|
|
|
bridgeport series 2 special w/i proto trak MX2 CNC 100% functional
For sale is a very nice Bridgeport series 2 special with a prototrak MX2 cnc control. Kurt power drawbar. R-8 spindle taper. 2-J variable speed head. Fresh spindle bearings. Front vari-speed bushings, VS belt. This is a tight machine that works great and has served me well. I have other machines for my larger work now, so this one has sat un-used for the last year and I think it is time to pass it on to someone who will use it like it was meant to be used. The paint is original, still has a good shine to it, but as with all machines it has a few chips here and there. Compared to other bridgeports that I have owned and operated I would say the condition is top 5% Unless you count new ones which aren't the quality of the older ones. The ways and ball screws are tight but slide freely. The Bijur oil system is working properly. The air assisted ... moreKnee is working as it should and can be adjusted to aid in lifting the rated 1500LB table load via an air pressure regulator at the rear of the machine. The cnc control is capable of bolt hole patterns, milling lines, circles, rectangle and circle frames, circle pockets as well as 4 sided and 3 sided pockets. Z axis is a DRO tied to the quill. The quill power feed works as it should in all 3 ranges and reverse. Back gears sound good. What else can I say, if I used it I would keep it. There is a short video of a few functions on youtube. go to youtube and search or cut and paste this into the search tab: bridgeport series 2 special w/i prototrak MX2 cnc Also-Free loading onto a flatbed truck or trailer- Buyer arranges shipping.
|
|
|
G111070 Proto Trak 15020 2-Axis CNC Mill Retrofit System
Click to Enlarge) Product ID# G111070 This Proto Trak 2-Axis CNC Mill Retrofit System appears to be in good cosmetic condition. Although there are a few small dings, scratches, signs of previous use. Please look at the photos. The controller unit powers-up and responds to movement from each of the three position sensors(X/Y/Z) although this is the only testing that has been performed. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as“Not Working” Included are the following components: One Proto Trak controller, One X axis motor& mount& One Y axis motor& mount, One emergency stop switch, the X/Y/ Z axis position sensors, the Proto Trak Power Supply Box, and various other mounting hardware. I am not sure how complete this set is so please look closely at the photographs and ask questions, ... moreif you have them. Some of the rubber insulation on some of the cables is cracking. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 47“L x 27“W x 27“H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 211 pounds Buyer pays freight plus a fixed handling fee of 35 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. C
|
|
|
CLAUSING KONDIA CNC VERTICAL MILL - PROTO TRAK MX-2 - 3-AXIS DRO
CLAUSING KONDIA CNC VERTICAL MILL- PROTO TRAK MX-2- 3-AXIS DRO NEW 1990/ MODEL FV1 48VS08/ GREAT CONDITION 3 HP AC MOTOR, INFINITELY VARIABLE SPEED DRIVE, OVERLOAD SAFETY DEVICE INTEGRATED WITH MOTOR, ARTICULATING HEAD ARRANGEMENT FOR MACHINING COMPOUND ANGLES, WORM GEAR ANGULAR POSITION OF HEAD IN TWO DIRECTIONS, LEVER-OPERATED MANUAL RAPID QUILL MOVEMENT, HANDWHEEL FOR FINE QUILL FEED, CHROME-PLATED PRECISION GROUND QUILL AND QUILL LOCK, ADJUSTABLE AUTO. FEED DISENGAGEMENT FOR QUILL FEED IN BOTH DIRECTIONS, MICROMETER DEPTH STOP, REVERSIBLE SWITCH FOR CLOCKWISE OR COUNTERCLOCKWISE OPERATION, R-8 SPINDLE, ABEC CLASS 7 SPINDLE BEARINGS, SPINDLE BRAKE, CONSTRUCTED OF MEEHANITE CASTING FOR SUPERIOR RIGIDITY& WEAR RESISTANCE, PRECISION GROUND LEADSCREWS, ONE-SHOT LUBRICATION, PROTO TRAK MX-2 MANUAL/CNC 2-AXIS CONTROL(3-AXIS DRO) POWER DRAWBAR, ... moreSIZE: 9″ X 48″ NUMBER OF T-SLOTS: 3, WIDTH OF T-SLOTS: 5/8″ CENTER DISTANCE OF T-SLOTS: 2-9/16″ LONGITUDINAL TRAVEL(X-AXIS) 36″ SADDLE TRAVEL(Y-AXIS) 15″ KNEE TRAVEL: 16-1/2″ RAM TRAVEL: 23″ THROAT DISTANCE: 6-5/8″ TO 29-11/16″ SPINDLE MOTOR: VS. 3 HP, 3 PH, AC, 60 HZ, SPINDLE SPEEDS: 60-4.000 RPM, SPINDLE TAPER: R-8, SPINDLE TO TABLE DISTANCE: 0– 18-5/16″ QUILL TRAVEL(Z-AXIS) 5″ QUILL FEED PER SPINDLE REV. 0015″ 003″ 0047″ QUILL DIAMETER: 3-3/8″ COLUMN TURRET DIAMETER: 15″ KNEE WIDTH& COLUMN, BEARING LENGTH: 12″ X 18-1/2″ BEARING LENGTH: 18″ RAM& TURRET BEARING LENGTH: 18″ RAM LENGTH: 36″ TABLE LOAD: 880 LBS, NET WEIGHT: 3.040 LBS, SHIPPING WEIGHT: 3.190 LBS, DIMENSIONS: 6’ LR X 5’ FB X 7’ H, ELECTRICS: 220 VOLT. 3 PH, 60 CYC, 3 HP, HIMES MACHINERY LLC. PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING* `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-1484c135372-0x113-
|
|
|
BRIDGEPORT R8 PROTO TRAK
2 HP IN WORKING CONDITION CALL FOR INFORMATION AND SHIPPING UNDER POWER CHECK MONEY ORDER ON PICK WE CAN SET UP SHIPPING
|
|
|
Southwest Industries Proto Trak Reader Head (Inv.31591)
Southwest Industries Proto Trak Reader Head Working Take-Off Reader Head This is the"Trav-a-Dial" type of reader head used with the earlier Proto Trak controls. Inv.31951. 31952) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge ... morein addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Bridgeport cnc milling machine quill PROTO TRAK FANUC Z AXIS SERVO MOTOR
GOOD MOTOR SERVO MODEL OOM HO6B 0632 BO11
|
|
|
BRIDGEPORT PROTO TRAK STARTER DISCONNECT PANEL ROCKFORD
CAME OFF WORKING PROTO TRAK CSD-721-P1
|
|
|
Prototrak 1540 v cnc lathe 2005 needs WK Proto trak Southwestern industries
Prototrak 1540 Lathe Fella's this lathe is very nice shape with the exception that it does not work. We wired the machine up and fired it up. However the screen came up black. I called Southwestern industries and they said it was the enclosure. The enclosure if you go through southwestern is 800 exchange. Some of you know or have a repairman that can do the job. anyway here it is the machine is very nice but does need some work. Also the door is bent on the end. check pictures. Thank you for your Business! Paypal for deposit only! God Bless!
|
|
|
Bridgeport CNC 2 Axis Vertical Mill with Proto Trak Controller
BRIDGEPORT SERIES II CNC VERTICAL MILL GENERAL SPECIFICATIONS: MANUFACTURER. BRIDGEPORT TABLE SIZE. 9" x 42" X TRAVEL. 32" Y TRAVEL. 12" QUILL TRAVEL. 5" KNEE TRAVEL. 16" SPINDLE MOTOR. 1.5 HP SPINDLE SPEED. 60- 4200 RPM QUILL DIAMETER. 3.25" EQUIPPED WITH: PROTO TRAK PLUS CNC CONTROL power draw bar Specifications subject to buyer verification Machine can be inspected under power in warren MI Price is loaded FOB our warehouse Please call with any questions Equipment-Specialists Big Dog Machinery 248-225-2906 All offers will be considered.
|
|
|
Bridgeport Style Knee Mill CNC 2 Axis Vertical Mill with Proto Trak Controller
This is a 2006 Mill Pro knee mill. Very similar to Bridgeport knee mill. The Proto-Trak computer was replaced in 2013. This machine runs very well and is still under power for your test and demo needs. This machine is sur-plus and is not needed any longer. Will accept cash on pick-up. Or cleared check/money order ONLY. Please contact 586-215-9903 between 9 a.m. and 6 p.m. EST for any questions or concerns or send me an ebay message.
|
|
|
2005 SOUTHWESTERN INDUSTRIES 10"x50" 3 AXIS CNC MILLING MACHINE / PROTO TRAK VM
2006 SOUTHWESTERN INDUSTRIES 10"x50" 3 AXIS CNC MILLING MACHINE/ PROTO TRAK VM(OC356) Specifications: TRAK DPM v3 10x50. Vertical, Max. 5000 rpm Brand: SOUTHWESTERN INDUSTRIES 3-AXIS CNC VERTICAL BED MILL Model: TRAK DPM v3 10x50 New in 2006 Table Size- 50" x 10" Travel(X. Y, Z axis) 30 x 17 x 21" Quill Diameter- 4.13" Spindle Taper- 40 Spindle Speed Range RPM- Varispeed drive- rpm Spindle Motor Power- vari-speed head- 5 HP Power requirements- 230/60/3 Approx Maximum Weight of Workpiece- 1320 lbs. Height of table from bottom of bed- 38" Approximate Machine Weight- 6400 Lbs.
|
|
|
Used Southwest Industries Proto Trak Plus Controller
This controller is coming off an Alliant Model 425. All the major parts needed to install the controller are here. We just upgraded our Alliant to a new controller. This controller was in good working order when it came off the machine. Everything sold as a package and as is. Will ship in multiple boxes. Or local pick up.
|
|
|
Brand New BRIDGEPORT R8 PROTO TRAK SPINDLE
NEW WE HAVE THE 14 DAY RETURN POLICY IF YOU ARE NOT HAPPY JUST RETURN THE ITEM WE WILL DO A FULL REFUND AND PAY ALL SHIPPING COST. NO HASSLE FREE RETURN POLICY ITS GREAT
|
|
|
1999 Acer E-mill CNC Edge Prototrak Proto Trak EVS-3VS 2 Axis ****LOW HOURS****
1999 acer e-mill EVS-3VS. Proto trak edge 2axis cnc retrofit. All original paperwork for cnc retrofit in 2003. Vise. Phase converter and mister included. 3hp 60-4500 rpm. This CNC has very low hrs and is extremely easy to run. I will also deliver up to 500 miles for a small fee. Please contact me if you have any questions!
|
|
|
Proto-Trak DPM Mill spindle motor
Fits Proto-Trak DPM Mill AGE3 Motor was professionally rebuilt new windings and bearings
|
|
|
30" X 3HP Spdl Southwest Ind. DPM 3 CNC VERTICAL MILL, Proto-Trak SM-3 Axis,Bed
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 30" X 3HP Spdl Southwest Ind. DPM 3 CNC VERTICAL MILL. Proto-Trak SM-3 Axis,Bed Ref# 153429 iammdna XMVCNC TRAK 3-AXIS CNC BED MILL w/HAND WHEELS MODEL: DPM3. S/N: 023AR11695, NEW: 2002 SPECIFICATIONS: ... moreTABLE SIZE. 10" x 50" TABLE TRAVEL(X) 30" SADDLE TRAVEL(Y) 17" VERTICAL HEAD TRAVEL(Z) 23.5" QUILL TRAVEL. 5" SPINDLE TAPER. 40 NST. SPINDLE NOSE TO TABLE. 0- 24" SPINDLE CENTER TO COLUMN FACE. 17.3" HEAD SWIVEL LEFT& RIGHT. 90 DEGREES. SPINDLE SPEED RANGE. 70- 4200 RPM. QUILL FEEDS(3) 002. 004, 006 IPR. MAXIMUM WORKPIECE WEIGHT. 1.320 LBS. APPROX DIMENSIONS. 68"W x 64"D x 95"H. MACHINE WEIGHT. 4.100 LBS. EQUIPPED WITH: SOUTHWESTERN INDUSTRIES PROTO-TRAK SM THREE AXIS CONTROL THREE-AXIS SIMULTANEOUS INTERPOLATION INCLUDING. HELICAL. CANNED CYCLES, GRAPHICS& MUCH MORE IN MANUAL MODE 3-AXIS DRO. RS232 PORT QUILL DIGITAL READOUT(Z IS HEAD UP& DOWN NOT QUILL) HANDWHEELS. REMOTE STOP/GO SWITCH. SQUARE BOX WAYS- HARDENED& GROUND PRECISION BALL SCREWS. TORQUE-RITE POWER DRAW BAR. COOLANT SYSTEM AUTOMATIC LUBRICATION SYSTEM. BELOWS WAY COVERS. 3 HORSE POWER SPINDLE MOTOR. TRANSITION FREELY FROM 3-AXIS CNC TO MANUAL PERFECT FOR A TOOLROOM OR PROTO-TYPE WORK CONDITION
|
|
|
Southwest Trak TRL 1745P CNC Lathe 17 x 45 Proto Trak LX2 DRO Turning Center
SKU: IP4044 Southwest Trak TRL 1745P CNC Lathe 17 x 45 Proto Trak LX2 DRO Turning Center. In Stock: 1 Brand: Southwest Industries Size: 17x45 Condition: Used Notes: Used Item. Good Condition. In good working condition. Model: TRAK TRL 1745P Type: CNC Lathe Turning Center Voltage: 208/230/460 RPM: 40-2200 RPM Capacity: 17-11/16 IN Length: 45 IN Part Number: TRL1745P Phase: 3 Horse Power: 7.5 Manufacturer: Southwest Industries Operator Panel: ProtoTRAK LX2 MPN: TRL 1745P Product Type: MechanicalComponents bulletpoint1: CNC Lathe 17x45 Turning Center bulletpoint2: 3 Jaw Chuck bulletpoint3: Tail Stock bulletpoint4: Aloris Tool Post Handling Time In Days: 2 Amazon Condition: UsedGood Capacities: Height of Centers: 8 7/8in Distance Between Centers: 45in Swing Over Bed: 17 11/16in Swing Over Saddle Wings: 16 1/8in Swing Over Cross Slide: 10 15/32in ... moreCross Slide Travel: 9in Tool Section Max: 1x1in Coolant: 4 Gallons Gear Box:2.5 Gallons Bed: Width: 12in Height: 11 1/2in Headstock: Spindle Nose: Camlock D1-6 Spindle Through Hole: 2in Spindle Taper: 1°29'15" Taper Reduction Sleeve: MT-4 Spindle Diameter at Front: 3.15in Number of Spindle Speeds: 12 Spindle Speed Range: 40-2200 Tailstock: Quill Travel: 6 1/4in Quill Diameter: 2 5/16 Quill Taper Hole: MT-4 Motors: Main Motor: 7.5HP Coolant Pump Motor: 1/8 General: 208/230/460VAC Apx Overall Dimensions 90"x42"x64"Tall Link to Operator Manual Automation Cntrl Sensing Devices Industrial Control Speed Controls Motion Control Encoder Industrial Parts R Us Accepts PayPal& Visa. Mastercard, AMEX, Company Checks, Bank Wire Transfer. We are always happy to accommodate our customers and fully understand the importance of timely shipping. Please view our shipping policies below to better understand how we can help you. All"non-freight" orders placed before 10:00 A.M. EST will be shipped the same day. All orders placed after 10:00 A.M. EST will be shipped on the following day. All smaller items 70 lbs. and under ship USPS Priority Mail. Larger p
|
|
|
Preowned Proto Trak Milling Machine, Model TRAK DPM
Item# 4113- Preowned Proto Trak Milling Machine. Model TRAK DPM Equipped With: Machine Specifications: Table Size: 9” x 49” Travel(X.Y,Z axis) 32” x 16” x 27” Maximum Quill Travel 5” Spindle Taper#40 Rapid Traverse X. Y, Z– 150 IPM Auto Lube Pump Motor 3HP/440V 3 Axis CNC Bed Type Shipping Point: AR Price: $18.900.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 kevinb@ontargetmachines.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14ac2c0e35b-0x10b-
|
|
|
CLAUSING CNC KNEE MILL PROTO TRAK MX 2 NICE!! NO RESERVE
Clausing Kondia Model VF1 2-Axis CNC Vertical Milling Machine with 9' x 48' Table. Variable Spindle Speeds to 4000 RPM, 2 HP, R-8 Taper, Coolant, Kurt Power Lock, Proto Trak MX2 2-Axis CNC Control, sn:Y-667 READY TO MAKE PARTS. WE WILL LOAD FOR FREE. ITEM MUST BE PAID FOR WITHIN 48-HRS OF AUCTION CLOSE. ABSOLUTELY TO PLAY-PAL. CERTIFED FUNDS OR WIRE TRANSFER ONLY. EMAIL ANY QUESTIONS.
|
|
|
BRIDGEPORT PROTO TRAK MILLING MACHINE CNC SWI CONTROL
NO ON LINE PYMENTS MACHINE COMES WITH R8 COLLET SET CNC MILLING VISE ENDMILLS UNDER POWER TURNKEY MACHINE PLEASE LET ME KNOW WHAT YOU NEED WE CAN HELP SET UP THE SHIPING FOR U PLEASE CONTACT US IF YOU NEED A SHIPPING PRICE WE CAN GET A GOOD DISCOUNT THE PRICE LISTED IS JUST AN APROX WE DO NOT COLLECT THE SHIPPING MONEY
|
|
|
2006 Proto Trak SMX K3
The machine was purchased brand new by our company and has had some use. Table length is 48" We have original purchased paperwork and manuals.
|
|
|
2007 Southwestern Trak DPM3 W/Proto Trak SMX Control
2007 Southwestern Industries Trak DPM3 3 Axis CNC Bed Mill Proto Trak SMX Control Very Good Condition! Questions Call Steve@ 866-803-5202 Shipping Quotes Contact Table Size- 50" x 10" Travel(X. Y, Z axis) 31 x 17 x 23.5" Quill Diameter- 3 15/16" Maximum Quill Travel- 5" Spindle Taper- NMTB 40, Spindle Speed Range- 40-600. 300-5000, Spindle Center to Column Face- 19" Spindle Motor Power- 5 HP, Power requirements. Control- 110V; 1P; 8A, Power requirements. Machine- 220V;3P; 17A, Maximum Weight of Workpiece- 1320 lbs. Height of table from bottom of bed- 38" Max spindle nose to table- 23.5" Min height- 85" Max height- 95" Width of machine including table- 73" Length with electric box door closed- 66" Overall width incl full table traverse- 108" Overall length with electrical door ... moreopen- 76" Footprint of Machine- 24" x 44" Weight net/ shipping lbs. 4100/ 4400, Rapid traverse X. Y, Z- 150 IPM, Auto Lube Pump, Precision ground ballscrews in the table. Saddle and ram, Chrome hardened and ground quill, Meehanite castings, Slide ways are Turcite coated, Wide way surfaces are hardened and ground, Drilling max capacity- 1" Milling max capacity- 5 inch3/min, Tapping max capacity- 1" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b3e1bca62-0x116-
|
|
|
PROTO TRAK PLUS Z AXIS Encoder SOUTHWESTERN INDUSTRIES
COMPLETE WITH ALL WIRE AND FACTORY PLUG FROM A PROTO TRAK PLUS WITH ALL HARDWARE
|
|
|
PROTO TRAK PLUS CONTROL DRIVER SOUTHWESTERN INDUSTRIES
COMPLETE WITH ALL PARTS FROM PROTO TRAK PLUS
|
|
|
PROTO TRAK X AXIS SERVO MOTOR SOUTHWESTERN INDUSTRIES
MOTOR IS COMEING OFF OF THIS MACHINE WE ARE UPGRADEING WE HAVE ALL OTHER PARTS IN OTHER AUCTIONS YOU ARE BIDDING OR BUYING SERVO MOTOR ONLY 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14bab6da22b-0x10d-
|
|
|
9 inch CRT for Proto Trak 3 control
This CRT is 3 years old. Was purchased for an older lathe which has been decommissioned. Very good condition.
|
|
|
PROTO TRAK BRIDGEPORT X & Y BALL SCREW
BALL SCREW ONLY CAME OFF THIS MACHINE 42" TABLE WILL INCLUDE BALL SCREWS WITH THREADED INSERTS COMPLETE IN GOOD SHAPE I WILL HAVE PHOTOS IN A FEW DAYS WE ARE TAKEING THEM OF THE MACHINE IF U DESIDE TO BUY THIS BEFOR WE U POST THE PHOTOS AND ONES I GET YOU PHOTOS AND DESIDE U DONT WANT IT THATS OK I WILL JUST RELIST IT IAM SURE YOU WILL LIKE THIS SET SO PLEASE DONT WAIT ALL ORIGINAL BRIDGEPORT STUFF NOT CHINA MADE I PROMISE WE SOLD THIS MACHINE AS A MANUAL MACHINE THIS IS WHAT THE CUSTOMER WANTED
|
|
|
BRIDGEPORT PROTO TRAK MOTOR HARDWARE
COMPLETE WE HAVE THE 14 DAY RETURN POLICY IF YOU ARE NOT HAPPY JUST RETURN THE ITEM WE WILL DO A FULL REFUND AND PAY ALL SHIPPING COST. NO HASSLE FREE RETURN POLICY ITS GREAT
|
|
|
Southwestern Proto Trak Edge, Programming & Operations Manual 2004
I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand ... moreWords. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Southwestern Proto Trak Edge. 062503 Programming and Operations Manual Year(2004) This Manual Covers Models: Proto Trak 062503 This Manual Includes: Introduction Description Definitions. Terms& Concepts Using the Proto TRAK Edge as a DRO Using TEACH Programming Changing or Correcting programs Making Parts with the CNC Math Help Program Memory& Storage Service Codes This Manual Has 38 Printed Pages. Year 2004 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover. Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. PDF's available
|
|
|
ALLIANT MILLING MACHINE PROTO TRAK CNC KNEE MILL
YOU DONT SEE KNEE THIS NICE TO OFFEN EXCELLENT SHAPE CAME OUT OF A TECH SCHOOL CALL FOR MORE PHOTOS YOU CAN SEE THE KNEE THIS MACHINE HAS LOWER HOURS NO ONLINE PAYMENTS CHECKS OR WIRE TRANSFER WE DO NOT COLLECT THE SHIPPING MONEY THAT YOU WOULD PAY DIRECT TO THE SHIPPER THE PRICE U SEE IS JUST AN APROX PRICE MACHINE COMES WITH A KURT STYLE 6" VISE R8 COLLET SET ASSORTMENT OF CUTTING TOOLS WE HAVE THE 14 DAY RETURN POLICY IF YOU ARE NOT HAPPY JUST RETURN THE ITEM WE WILL DO A FULL REFUND AND PAY ALL SHIPPING COST. NO HASSLE FREE RETURN POLICY ITS GREAT
|
|
|
SOUTHWESTERN INDUSTRIES PROTO TRAK 15814R Rev. F USED MX2 PENDANT ASSEMBLY
PROTO TRAK 15814R Rev. F USED MX2 PENDANT ASSEMBLY. ARM WILL BE REMOVED FOR SHIPPING. Click HERE to view our other items! Please view all photos. Feel free to e-mail me questions. I do combine shipping. I accept Paypal. International bidders are always welcome. Please email me for shipping prices. Wisconsin resident must pay sales tax. Payment due within 7 days. Thanks for looking! F4
|
|
|
SOUTHWESTERN INDUSTRIES PROTO TRAK MX2 CONTROL DRIVER P# 15832-1 SYSTEM # S62505
SOUTHWESTERN INDUSTRIES PROTO TRAK MX2 CONTROL DRIVER P# 15832-1 SYSTEM# S62505 Click HERE to view our other items! Please view all photos. Feel free to e-mail me questions. I do combine shipping. I accept Paypal. International bidders are always welcome. Please email me for shipping prices. Wisconsin resident must pay sales tax. Payment due within 7 days. Thanks for looking! F4
|
|
 |