|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Pearisburg, United States Model: SPM 710. Make: HERCULES. MAKE: HERCULES. SWING OVER BED: 32". 192 INDUSTRIAL PARK DRIVE. Model Year: 1995. 24" BED WIDTH. 188" BED LENGTH.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Main features: Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. ... moreEasily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Description: .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment: Synthetic Winch Rope Line Recovery Cable for ATV SUV W/ Sheath 5/16"x50' 12000LBS Description: -Highest after-sales guarantee -Low cost,Highest ... morecost performance -Brand New & High Quality Durable and easy to install Main features: Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. Easily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Product Specifications: Color:Orange Material:Heavy duty nylon Type：Winch Breaking Strength：12000LBS Length: 50 feet.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment: Synthetic Winch Rope Line Recovery Cable for ATV SUV W/ Sheath 5/16"x50' 12000LBS Description: Highest after-sales guarantee Low cost,Highest ... morecost performance Brand New & High Quality Durable and easy to install Main features: Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. Easily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Product Specifications: Color:Orange Material:Heavy duty nylon Type：Winch Breaking Strength：12000LBS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features & Details： Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp ... moreFrays. Easily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Specifications: 1.Color:Black 2.Material:Heavy duty nylon 3.Type：Winch 4.Breaking Strength：8500LBS 5.Length: 50 feet 6.Diameter: 1/4" Package Included: 1 x Winch Rope（As the pictures show） .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Main features: Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. ... moreEasily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Description: .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Main features: Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. ... moreEasily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Description: .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Main features: Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. ... moreEasily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Description: .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment： 8500LBS Synthetic Winch Rope Line Recovery Cable for ATV UTV w/ Sheath 1/4"x50' Specifications: Color:Black Material:Heavy duty nylon Type：Winch ... moreBreaking Strength：8500LBS Length: 50 feet Diameter: 1/4" Package Included: 1 x Winch Rope （As the pictures show） Description: Highest after-sales guarantee Low cost,Highest cost performance Brand New & High Quality Durable and easy to install Features & Details： Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables..
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment: 12000LBs for ATV UTV SUV Truck Boat suggest use with Hawse Fairlead Description： -Highest after-sales guarantee -Low cost,Highest cost performance ... more-Brand New & High Quality Durable and easy to install Specifications: Material: Ultra-high molecular weight polyethylene Protect sleeve design,Protecting the rope is not be damaged easily Color: Blue Length: 15m(50'). Thickness: 5/16"(8mm),5/16" x 50'.Breaking Strength: Average 12000 lbs Replace your old cableSafe and easy to handle DesignHeavy duty nylon eye guard Hook Attachment Perfect for all your PLOW winching needs Package Include：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment: 12000LBs for ATV UTV SUV Truck Boat suggest use with Hawse Fairlead Package Include： 1 x Synthetic Winch Line Cable Rope W/o Product Instruction ... moreDescription： Highest after-sales guarantee Low cost,Highest cost performance Brand New & High Quality Durable and easy to install .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： 8500LBS Synthetic Winch Rope Line Recovery Cable for ATV UTV w/ Sheath 1/4"x50' Description: -Highest after-sales guarantee -Low cost,Highest ... morecost performance -Brand New & High Quality Durable and easy to install Features & Details： Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Stronger Than Traditional Steel Cables. Easy to Handle, No Sharp Frays. Easily Spliced. Good Resistance to UV and Chemicals. Workable below -20 degree centigrade. Specifications: Color:Black Material:Heavy duty nylon Type：Winch Breaking Strength：8500LBS Length: 50 feet.
|
|
|
|
2 POWERMATIC 90 WOOD LATHE 6" & 3 1/4" FACEPLATE 1-1/2" x 8 TPI ~VGC LQQK~
2 Powermatic Model 90 Wood Lathe Face Plates. 6" 3 1/4" Estate sale find in Great condition. Both have 90% of their original paint. Both are Inboard/right hand thread with 1-1/2" x 8 TPI mount. The 6" has a indentation/straight line on face side. Don't know how or why it's there. Rest assured it's not a crack. Will make a nice addition to your wood turning tool collection. Be sure to view all pictures and please feel free to ask any and all questions BEFORE bidding. Thank you for looking. All Sales Are Final.
|
|
|
WILLIAMS KNURLING TOOL 2040 4 SOUTH BEND ATLAS CRAFTSMAN LATHE 3/8" SHANK
Original Williams knurling tool. Stamped"NO. 2040 KNURLING TOOL HOLDER" on one side and"J.H. WILLIAMS& CO. DROP-FORGED IN U.S.A. on the other. Shank is 3 1/8" long. 3/4" high and 3/8" thick. Some marks noted. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cincinnati HydraShift Geared Head Metal Lathe 17"X72" L1 Taper 3&4 jaw chucks
Used Cincinnati Hydrashift metal lathe 17"X72" with flame hardened ways. Powered by 5HP 3phase currently wired 480v but can be changed to 220v. 25-980 Rpms and feeds 1 1/2 to 92 tpi. Includes taper attachment. 10" 4 jaw, 8" 3 jaw chucks, 14" 9" face plates, L1 taper on spindle, chip pans, manual, and thread dial. Lathe has 1/2 turn backlash in compound, and 1/8 turn in crossfeed. Bore is 1 3/4" The ways have minimal wear, are smooth with no lip, minor dinges. The lathe as been repainted at some point. It has new chip pans and the thread dial has been adapted but works good. The lathe runs good, shifts fine, and all functions work as they should Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift ... moreloading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
|
|
|
CINCINNATI TRAY TOP LATHE MACHINE 18-54 54" centers TAPER ATTACHMENT 3 JAW CHUCK
CINCINNATI TRAY TOP LATHE 18 X 54. METAL TURNING LATHE WITH TAPER ATTACHMENT PICK UP FROM CLOSED MACHINE SHOP WILL HELP IN LOADING. You will need a HD Pickup or we can arrange shipping on Truck. Make offer. Available for pick up only but we will load it on a pallet& arrange for shipment(your choice) Payment details PayPal Preferred. Pay on pickup Accepted Seller's payment instructions. Payment due within 7 days. We offer free loading help for local pickup. Item must be picked up with in 14 days of end of auction. Winner is responsible for all shipping and handling cost. We will help you load it. Have fork Lift) Used: An item that has been used previously. The item may have some signs of cosmetic wear. But is fully operational and functions as intended. Feel free to come and see this before you bid we are located at 43 Bethune Blvd. ... moreSpring Valley, NY 10977. Call 201-400-0406. fax 845-425-9595 Address 43. Bethune Blvd, Spring Valley, NY10977. North of NYC on NY thru-way. and Northen end of Garden State Parkway.
|
|
|
USED Type 3 Butt Welded HSS Centre Lathe Turning Cutting Tool FREE UK POSTAGE
One USED Type 3 Butt Welded HSS Lathe Tool WITH THINNED SHANK Very little wear- been used about 6 times judging by the toolpost stud impressions ~ Still Sharp! The underside of the shank is reduced from 20 to 17mm to lower the cutting height. Possibly to suit a smaller lathe This tool is not tungsten carbide Approximate Size(LHW) 140mm x 17mm x 16mm ~ Photo is actual tool for sale Price Includes UK Standard 1st Class Postage. O verseas Postage adds: Europe £3.50/ Can& US £6.22/ Australia £6.61 Despatch is usually the same day or ONE WORKING DAY at the latest and I also post Saturday morning(last collection noon) PayPal Only ~ No Cheques or Postal Orders
|
|
|
IKEGAI Lathe 20" x 48" 220/440v 3 Phase Model A20
IKEGAI Lathe 220/440v 3 Phase Model A20 ∙ 3 Jaw Chuck. Tailstock, Quick change tool holder ∙ 220/440 Volt ∙ OutPut: 7.5 kw 60 Hz ∙ Amps: 24/12 ∙ WEIGHT: 5020 lbs. 0214.5 AB. 0214.9 AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged ... moreby the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with
|
|
|
Okuma L1420 CNC Lathe, 15" Chuck, Tailstock, 3.15" Bar, Chip Conveyor, OSP5020
CNC Machine Tool Services 1666 Oakbrook Drive. Gainesville, GA. 30507 706-783-5091 fax 770-401-3572 cell Email- sales@cncmts.com For a link to our website. Please click on this icon OKUMA L-1420 TWO AXIS CNC LATHE SPINDLE NOSE: ASA A2-8 SPINDLE BORE: 3.15" BAR CAPACITY: 2-5/8" MAXIMUM SPINDLE SPEED: 2800 RPM NUMBER OF SPINDLE SPEEDS: INFINITELY VARIABLE CHUCK SIZE 15" KITAGAWA) MACHINE TRAVELS CROSS SLIDE(X-AXIS) 9.05" LONGITUDINAL(Z-AXIS) 26.38" CUTTING FEED RATE: 0.0001– 40 IPR RAPID TRANSVERSE X: 472 IPM RAPID TRANSVERSE Z: 591 IPM TURRET TYPE: AUTO/V12 NUMBER OF TOOLS: 12 TOOL CLAMPING: BOLT CLAMP BED LENGTH OF SLIDEWAY: 59.94" WIDTH OF SLIDEWAY: 18.11" MOTORS MAIN SPINDLE: 30 HP X-AXIS SERVO MOTOR: 2.7 HP Z-AXIS SERVO MOTOR: 5" HYDRAULIC POWER PUMP MOTOR: 2 HP COOLANT PUMP MOTOR: 34 HP COOLANT ... moreCAPACITY: 60 GALLONS HYDRAULIC TAILSTOCK DIAMETER OF QUILL: 3.94" TAPER OF CENTER: MT#5 QUILL STROKE: 4.72" WEIGHT BETWEEN CENTERS 1375 LBS. HYDRAULIC POWER UNIT TANK CAPACITY: 14 GALLONS PRESSURE RANGE ADJUSTMENT: 450 PSI FLOW: 6.6 GPM FLOOR SPACE. APPROX. 128.7" X 68.7" WEIGHT. APPROX. 13,600 LBS ELECTRICS: 220V. 3 PH, 60 CYCLE I ALSO HAVE A 12' KITIGAWA CHUCK AND A COLLET CHUCK THAT CAN BE INCLUDED WITH THIS MACHINE- DEPENDING ON FINAL SALES PRICE. THESE ITEMS ARE NOT INCLUDED IN THE PRICE. BUT CAN BE NEGOTIATED. Please go to our website for our terms and conditions. This machine is under power and ready for inspection. Very good condition. Quiet Spindle. Turret, Axis, etc. Very Strong, heavy duty machine. Its ready to start producing now. We have all the manuals& Toolholders. 2) Riten Live Centers are included. Rear Discharge Chip Conveyor. We also can arrange the transportation to your facility using one of our trusted truck lines. Considering we ship machines all over North America. We get great rates on shipping costs. Sold with a 30 day return privilege. Please refer to our website for all the terms and conditions of sale. CNCMTS will also prov
|
|
|
Unimat 3 lathe with many attachments
Nice Austrian made Unimat 3 lathe. I purchased this many years ago from a model maker who retrofitted it with a unimat variable speed motor and mounted it to a 1" thick aluminum plate. I built the cabinet for it and added the dial indicators and changed the original handwheels. The originals handles are included and can easily be mounted back on. The motor can be quickly changed to work in the vertical drill. I have used this lathe very little and it is in very good shape. The original thread formers were wrapped in oil paper and remain in very nice shape with little if any use. The following tooling is included: Hand tool rest. Vertical drilling head with fine feed attachment. Dividing attachment with 4 plates. ER collet holder with one 1/4" collet. 3 jaw chuck, 4 jaw chuck. Face plate, Dog plate. Threading attachment with all ... moreEnglish and Metric Formers and guides(23 total) Drill chuck. Live Center, 2 Dead Centers. 3 point steady rest. Power feed gear. Top slide. Milling table. Machine Vise. 2 Single tool posts. I made the quick change tool post and holders and is well made. There is a home made saw table that is ok. two slitting saw holders are also included as well as some cutters. The original catalogs and instruction books are included. I can provide additional pictures upon request. I will pack items carefully and use two boxes if necessary. I will provide a shipping cost upon completion of sale but would guess it would cost upwards of $75.00 for me to pack and ship Thank you On Apr-23-13 at 20:24:01 PDT. Seller added the following information: On Apr-23-13 at 20:31:36 PDT. Seller added the following information: The lathe is retrofitted with a Sherline variable speed motor. Not a Unimat motor as stated above.
|
|
|
!NO RESERVE! Labvolt Mach 3 CNC Lathe! ****
Hello I am selling my Labvolt 5300(sherline) CNC lathe. It has been converted to Mach 3! Details: 1. Very accurate and rigid design. 2. Spindle has is hole through and programmable up to 2800 rpm with spindle tach feedback! That means you make threads on this machine! 3. Takes any kind of G and M Code. 4. Mach 3 Included. You do not need any additional software or hardware to make parts with this machine. Simply use the wizards in the program to make anything u want! 5. Comes with the computer. Monitor, keyboard, mouse, and machine. You just plug it in, and make parts! Model 5300-B– CNC Lathe(Light Duty) 120 V– 60 Hz 220 V– 50 Hz 240 V– 50 Hz. Power Requirement Current 3 A 1.5 A 1.5 A. Lathe Swing Over Bed 90 mm(3.5 in) Center Height 101.6 mm(4 in) Distance Between Centers 200 mm(8 in) Swing Over Cross Slide 48 mm(1.9 in) X-Axis Travel 47.8 ... moremm(1.88in) Z-Axis Travel 105.4 mm(4.15in) Resolution ±0.00318 mm(±0.000125 in) Headstock Spindle Bore 10 mm(0.405 in) Spindle Taper Morse No. 1. Tailstock Taper Morse No. 0. Sleeve Stroke 38.1 mm(1.5 in) Main Spindle Drive Programmable Speed Range 0-2800 r/min. Motor 160 W(0.21 hp) Overload protected. Feed Motors Type Stepper. Resolution 400 steps/r. Rapid Traverse Speed 356 mm/min(14 in/min) I Will be uploading a video of the machine in action soon! So keep posted! Shipping is the buyers responsibility. I will put this machine on a pallet and shrink it for you, but shipping is your responsibility. This machine weighs 170 lbs with computer and monitor. 20% of the purchase price is due within 12 hours. And the full price must be paid for within 72 hours. Here is my number if you have any questions! 303-587-859two Thank you, Good luck! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e4302f2dc-0xfc-
|
|
|
MONARCH 16 X 54 LATHE HARD BED 3+4+KDK MODEL K NEW IN 1968
Nice lathe.Hard bed,12 inch adjustable 3 jaw chick,D16,has hard jaws and many sets of soft jaws.12 inch 4 jaw chuck.KDK master holder(no tool holders)For more info 909-641-2144-DON
|
|
|
unimat 3 emco lathe iii lll austria mini
up for your consideration is a small lathe made by EMCO- works great- serial 85030274- only what is pictured will be sent- looks complete. But not accessories-white belt looks worn and will need to be replaced- unit has lots of marks and deep scratches- black residue from what appears to be past projects- no picture of the extra gray belt jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e5983aef2-0xfa-
|
|
|
20 X 40 Victor Engine Lathe 3-1/8 Bore 6 Jaw Chuck Fully Tooled
20 x 40 Victor Engine Lathe. 3-1/8 spindle bore, 16 speeds, inch/ metric threading, hard ways, made in Taiwan. Fully Tooled with 12" Buck 6 jaw chuck. 4 jaw chuck, Aloris tool-post and holder, live center, Jacobs drill chuck, trav-a-dial, faceplate, steady rest, and factory tool kit. I THINK it will swing 27" thru the gap, however the gap has never been removed. This machine was bought new by me. Never repainted, never abused, VERY accurate, Replaced it with a bigger machine. I will discount if you don't want all of the accessories Machine is under power if you would like to run it. I accept paypal or cash please email if you have a question
|
|
|
ATLAS 101 METAL LATHE 6" Swing 16" Bed 3 Jaw Chuck & Feeds VG+DEAL!
ATLAS Quality Clausing Corp. Kalamazoo MI METAL LATHE No. 10100 ~16" Work Bed 6" Swing ~Overall Length 34" 3 Speed Geared Selector Three(3) Jaw Chuck Feed Tables Tool Rest Heavy Steel WOW- Offered for sale is a ATLAS Quality No. 10100 METAL LATHE with 3 Jaw Chuck. Dead End(Tail Stock) Drill Chuck, 3 Geared Speed Selector, feed tables(cross slides) and tool rest/ post. Measures about 34" Long, the work area is about 16"Long with a 6" Swing. This fine metal lathe is well suited for small to medium projects. She looks lightly used, if used at all. Comes from a watch and clock maker's shop. I see no signs of damage other than a crack in the plastic pulley/ gear cover. The pulley belt is there but no motor. Though almost any decent 3/4 to 1 HP motor should work fine. No manual, though should be available on line, ... morebelt instructions on inside lid. The Atlas name plate is on the bed end and on gear housing. Weighting about 100 Lbs and I would prefer local pick-up. Can meet within 50 mile radius of Baltimore. But will ship via ODFL(Old Dominion) if buyer wants to pay the freight and boxing costs. Contact me in advance for shipping estimates. Please see the many pictures provided for more details. Thank you. Shipping based on actual postage and Insurance Priority Mail required on some international shipments for insurance purposes. I do not ship to some countries. My goal is your happiness. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS 12*24 METAL TURNING LATHE w ACCESSORIES, COMBO CROSS-FEED, 3-JAWED CHUCK
ATLAS 12*24 METAL TURNING LATHE w ACCESSORIES. COMBO CROSS-FEED, 3-JAWED CHUCK 110 v MOTOR. TAILSTOCK w LIVE CENTER, THREAD FEED, VGC. PICK-UP ONLY- IN NORTH-CENTRAL WEST VIRGINIA. I WILL NOT SHIP THIS. THIS PARTICULAR LISTING IS FOR A VINTAGE ATLAS 12/ 24 METAL LATHE IN VERY GOOD. USED CONDITION. I HAD IT RE-BUILT WHEN I PURCHASED IT(USED) BACK IN THE 1970s. I DOUBT IF I PUT 10 HOURS ON IT SINCE THEN. DETAILS: CAPACITY- 12" SWING BED LENGTH 24" 110 v/ 220 v MOTOR w/ ADDED SWITCH BOX THREE-JAWED SYNCHRONOUS CHUCK COMPOUND ADJUSTMENT ON TOOL HOLDER BAR MICROMETER TYPE DIALS ON TOOL BARS LOCKING TAIL-STOCK for MORSE TAPER TOOLING MORSE TAPER LIVE CENTER CLUTCH LEVER(ON DRIVE BELT) FULL LENGTH THREADING DRIVE ALL GEARS AND BELTS ARE IN GREAT CONDITION. WAYS ARE TRUE AND SQUARE WITH MINIMAL WEAR. HEAVY-DUTY STEEL STAND w CABINET for ... moreTOOLING SEVERAL STEEL AND CARBIDE CUTTERS THIS UNIT IS(WAS) IN GOOD RUNNING ORDER WITH NO KNOWN LIMITATIONS(OTHER THAN PHYSICAL LENGTH AND SWING LIMITS) A GREAT LATHE FOR THE HANDYMAN OR FARM-RELATED APPLICATION. THIS LATHE WAS RECENTLY DIS-ASSEMBLED AND REMOVED FROM MY HOUSE DUE TO SPACE REQUIREMENTS. IT IS AVAILABLE FOR PREVIEW IN ITS DIS-ASSEMBLED STATE IN STORAGE. IF SO INCLINED. NORTH-CENTRAL WEST VIRGINIA- 2 MILES OFF INTERSTATE I-79. I WILL OFFER FREE STORAGE FOR UP TO 2 MONTHS TO ALLOW FOR YOUR PICK-UP(IF NEEDED) PAYMENT THOUGH IS EXPECTED AT END OF THE AUCTION. WINNER SHOULD BRING HELP WHEN PICKING UP- IT WILL TAKE TWO MEN TO LOAD THE 2 LARGE PIECES. PAYMENT IS EXPECTED WITHIN 24 HOURS UNLESS YOU HAVE CONTACTED ME TO MAKE OTHER ARRANGEMENTS. I AM WILLING TO WORK WITH YOU AS LONG AS YOU COMMUNICATE WITH ME. IF YOU HAVE NOT PAID- OR CONTACTED ME- WITHIN 4 DAYS. AN UNPAID ITEM CASE WILL BE OPENED. PLEASE REVIEW THE PHOTOGRAPHS FOR ADDITIONAL INFORMATION THEY ARE SUPPLIED TO PROVIDE A VISUAL DESCRIPTION TO ADD TO THE VERBAL DESCRIPTION THAT I PROVIDED. BY BIDDING ON THIS ITEM,
|
|
|
SuperMax 14" X 40" Geared Head Engine Lathe, 3 & 4 Jaw Chucks, Steady Rest
Here's a 14" X 40" Geared Head Engine Lathe with both Inch and Metric Threading that runs good. Is well equipped, and is ready to go to work. Now available for your inspection under power and/or purchase at our Warehouse in Beautiful Downtown Miamisburg. OH is this SuperMax Model LE 1338. 14" swing X 40" cc Geared Head Engine Lathe. S/N 18204-026, Manufactured New in 1993. This machine has great ways with a removable gap. We have run this machine through all speeds and feeds and find it to be in Good Operating Condition. Further. It is equipped with both Inch and Metric Threading, 7 3/4" 3) Jaw Chuck, 10" 4) Jaw, 4" Steady Rest, and a 5C Collet Drawbar. These SuperMax Lathes are Real Nice Geared Head Engine Lathes and this one is Very Well Equipped. Specifications are as follows: Specification Description ... moreDistance Between Centers, 40" Swing Over Bed, 14" Swing Over Cross Slide, 9" Swing In Gap, 21" Width of Gap, 9" Spindle Bore, 1 3/8" Spindle Nose, D1-3, Spindle Speeds(16) 35 RPM- 2.000 RPM Main Motor, 3 HP, Width of Bed Ways, Top Slide Travel, Cross Slide Travel, Tailstock Diameter, Tailstock Travel, Tailstock Morse Taper, Morse#3, Threading- Metric, Threading- SAE, Threading- Module, Threading- Diametral, Feeds- Metric(R10 Series) Feeds- SAE(R10 Series) Cross Feeds, Approximate Dimensions, 38" W x 76" L x 44" H Approximate Weight, 2.500 lbs. Equipped With: 7 3/4" 3) Jaw Chuck 10" 4) Jaw Chuck 5C Jacobs Quick Acting Collet Closer Threading Dial 4" Steady Rest Jacobs Chuck for Tail Stock(4) Way Tool Block Carrage Stop Foot Brake You can see this lathe under power at our Warehouse in Beautiful Downtown Miamisburg. OH by calling Andy or myself for inspection(see phone numbers below) This is SuperMax Geared Head Engine Lathe built with a whole lot of quality in Tiawan. Overall. A Good Operating Engine Lathe that is very well equipped and ready to go to work. The appearance speaks for itself(see photo's) If you nee
|
|
|
Optimum 14'' x 40'' Lathe w/ 3 Axis DRO 3 Phase
This is an Optimum(brand) industrial lathe. They are sold by Grainger. It has a three axis DRO. It is in excellent condition. It was manufactured in 2010. It comes with accessories. 3 and 4 jaw D1 cam lock chucks, follower rest, steady rest, etc. Pickup preferred. Freight might be arranged. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2007 DMG Sprint 65-3 Linear CNC Lathe 3 turrets Live Tools
2007 DMG Sprint 65-3 Linear CNC Lathe Max. Bar Diameter: 2.8" 3.5" Chuck Diameter: 6.9" Spindle Nose: 5.5" Max. Rotational Speed: 5.000 RPM Power(S6: 25% S1) Siemens: 32.2/ 29.5 HP Counter Spindle: Max. Bar Diameter: 1.8" Chuck Diameter: 6.9" Spindle Nose: 5.5" Max. Rotational Speed: 5.000 RPM Power(S3 25% S1) Siemens: 33.5/ 22.8 HP Axes: Max. Rapid Traverse of Axes: 1181.1 IPM Max. Axes Acceleration: 196.9 IPS Path X1: 6.5" Path Z1: 8.7" Path X2: 6.5" Path Z2: 5.9" Path X3: 6.5" Linear) Path Y3: 3.1" 2.0" +1.2" Path Z3: 25.6" Path W2: 27.2" Turret: Number of Turrets: 3 Tool Stations per Turret: 12 Driven Stations: 12 Diameter of the Tool Holder(DIN 69880) 30 Max. Rotational Speed of Driven Tools: 4000 RPM Power(S3 25% S1) 7.4/ 3.4 HP General: Weight: 22.928 ... moreLbs Equipped With: Siemens 840D Control IEMCA VIP 80r E-11 Bar Loader(6 foot) Spindle Liner Software for tool life monitoring only for CNC Artis Chipblaster High Pressure Pump Powertools Software Chiller for the coolant Assorted Tooling(Original cost- $145.000) Schunk Chuck(high precision) Chip Conveyor Comments: It has been lightly utilized and has primarily been machining aluminum since new. New replacement cost($340.000) plus tooling($145,000) = $485,000 Machine On Hours- 4852 Machine Working Hours- 1646. Price: $259.500 FOB Truck Pennsylvania Thank you, Maury Cohn 5 attachments— Share all images DMG Sprint 65-3 Linear CNC Lathe 01.jpg 30K Share DMG Sprint 65-3 Linear CNC Lathe 03.jpg 28K Share DMG Sprint 65-3 Linear CNC Lathe 08.jpg 40K Share DMG Sprint 65-3 Linear CNC Lathe 11.jpg 49K Share DMG Sprint 65-3 Linear CNC Lathe 16.jpg 38K Share 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f126d3438-0x102-
|
|
|
VERY NICE HARDINGE 9" X 13" CHUCKER LATHE MODEL HC 3 PHASE 220 VOLTS
VERY NICE HARDINGE 9" X 13" CHUCKER LATHE MODEL HC 3 PHASE 220 VOLTS Prev Stop Play Next You are bidding on a Hardinge Chucking Lathe. Model: HC. This is a very nice lathe in great condition and it is fully guaranteed. 1-1/16" Bar Cap 6" Max. Turn Diameter 9" Swing. Over Bed 13" Face of Turret To Spindle 3000 RPM 4 1/2" Cross Travel 8 Position Turret We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery
|
|
|
#400B DAEWOO Puma 27.5" x 41.3"cc Two-Axis CNC Lathe / Turning Center (New 2001)
Preowned DAEWOO Two Axis CNC Turning Center. Model: Puma 400B, New 2001) Swing over bed Swing over saddle Recommended turning diameter Maximum turning diameter Maximum turning length Draw tube diameter Spindle bore Spindle nose Spindle speed range X-axis travel Z-axis travel Number of tools on turret X-axis rapid feed rate Z-axis rapid feed rate Tailstock quill diameter Tailstock spindle taper Tailstock stroke 27.56" 18.9" 14.96 21.65" 41.34" 4.63" 5.2" A2-11 20-2.000 R.P.M. 14.25" 43.5" 10 630 I.P.M. 787 I.P.M. 4.72" MT#6 4.72" Equipped With Solid box way construction#18i-T FANUC CNC two-axis CNC control Ten station turret 18" Diameter three-jaw chuck Programmable tailstock quill Built-in tool presetter Chip conveyor Coolant system 30/37 H.P. Continuous Duty/30 Minute) AC spindle drive ... moremotor and electrical controls Approximate Weight: 18.040 Lbs. Approximate Floor Space Required(Machine Only) 154" L-R x 95" F-B x 89" H, Ex-Site Bloomfield. CT)
|
|
|
Clausing 13 x 40 Geared Head Engine Lathe 230 Vac 3 Ph, Coolant Pump 10" Chuck
INDUSTRIAL-PARTS-R-US Next Day Shipping Available for orders placed before 3:30 P.M. EST. Search: Search Move mouse over images to see enlarged version Clausing 13" x 40" Geared Head Engine Lathe 10" Chuck Coolant Pump Acu-Rite DRO Click to open supersize image This is a USED Clausing 13" x 40" Geared Head Engine Lathe. This unit is in great running condition. Includes Acu-Rite Digital Readout DRO. The DRO will need to be calibrated. One axis doesn't seem to be reading. 13” X 40” CLAUSING COLCHESTER ENGINE LATHE EQUIPPED WITH 10” 3-JAW CHUCK, THREAD CHASING DIAL, FOOT BRAKE, DRILL CHUCK IN TAILSTOCK, COOLANT TANK WITH PUMP, SPECIFICATIONS SWING OVER BED: 13” SWING OVER CROSS SLIDE: 8-1/4” BAR CAPACITY THRU SPINDLE: 1-5/8” DISTANCE BETWEEN CENTERS: 40” SPINDLE NOSE: 4” D1 CAMLOCK, HOLE THRU SPINDLE: 1-21/32” TAPER ... moreIN SPINDLE NOSE BUSHING: 3MT, SPINDLE SPEEDS, NUMBER OF SPINDLE SPEEDS: 16, SPINDLE SPEED RANGE: 30-2500 RPM, US STANDARD(45) 2-72 TPI, METRIC THREADS(39) 2- 14 MM, LONGITUDINAL FEEDS: 001– 040” CROSS FEEDS: 0.0005– 0.020” LEAD SCREW DIAMETER: 1-1/8” 4 ACME, FEED ROD DIAMETER: ¾” LENGTH OF BED: 13-1/2” WIDTH OF BRIDGE: 6-7/8” CROSS SLIDE TRAVEL: 8-1/4” CROSS FEED DIAL: DIRECT READING, TOOL BLOCK OPENING: 1” SPINDLE DIAMETER: 1-11/16” CENTER: 3MT, SPINDLE TRAVEL: 4-1/2” SPINDLE GRADUATIONS: 0– 4-1/2” BY 1/16” FEED DIAL GRADUATIONS: 002” WIDTH: 9-1/8” DEPTH AT CENTER: 10-1/4” WAYS. INDUCTION HARDENED: 2V, 2 FLAT, MAIN MOTOR: 5 HP, CONTROLS: MAGNETIC STARTER WITH, 110 VOLT TO PUSH BUTTONS, DIMENSIONS: 72” L-R X 36” F-B X 48” H, WEIGHT: 2585 LBS, ELECTRICS: 230 VOLTS. 3 PH, 60 CYC, Why Buy From Us? Important Policies Domestic Shipping Payment& Checkout 30 Day Money Back Guarantee Contact Us Why Buy From Us? We post our items to over 50 countries. Firstly. We promise fast shipping along with professional and secure packaging. But most importantly you can be assured of old fashioned customer service. You can expect our service to be friendly and professional. You can also
|
|
|
LeBlond Regal 18" X 78" Geared Head Engine Lathe, w/ 1 3/4" Spindle Hole
Now available for your inspection under power and purchase at our Warehouse in Beautiful Downtown Miamisburg. Ohio is this"Very Nice" LeBlond Regal 18" swing X 78" cc Geared Head Engine Lathe. We have run this machine through all speeds and feeds and find it to be in Very Good Operating Condition. Further. It is equipped with a 1 3/4" Spindle Hole, 10" 3) Jaw Chuck, and a Durian Tool Post w/ 5 Tool Holders. These LeBlond Engine Lathes are Excellent Engine Lathes Built With a Whole Lot of Quality in the USA. Specifications are as follows: 18” Swing Over Bedways 10” Swing Over Cross Slide Hard Ways Inch Threading Spindle Speeds from 24 to 1000 RPM 1.75” Spindle thru Hole 10” 3-Jaw Chuck(2) Chip Pans Thread Dial 2.5/ 5 HP 220/440 Volt Electrics Note: There is some very light scoring on the V-ways. But none on the ... morehardened and ground Taper Ways. You can see this very nice machine tool under power at our Warehouse in Beautiful Downtown Miamisburg. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a LeBlond Regal Geared Head Engine Lathe built with a whole lot of quality in the USA. Overall. A"Great Operating. Good Looking" Engine Lathe that is ready to go to work. The appearance speaks for itself(see photo's) If you need a good Engine Lathe of this size. Don't pass up this opportunity. Y ou will have no regrets if you buy this machine. We believe the new owner of this LeBlond Regal Geared Head Engine Lathe will be very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund retu
|
|
|
LONGEM GAP BED ENGINE LATHE 24"/32" X 80" INCH/METRIC THREADS 3 1/4" SPINDLE
THIS AUCTION IS FOR A USED LONGEM LG2480D GAP BED ENGINE LATHE. LATHE IS IN GOOD WORKING CONDITION! PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. 24" X 80" LONGEM GAP BED ENGINE LATHE MODEL LG2480D: SPECIFICATIONS SERIAL. 94-03-96 MODEL. LG2480D YEAR NEW. 12/1994 SWING OVER WAYS. 24 SWING IN GAP. 32.7" SWING OVER CROSS SLIDE. 11.7" DISTANCE BETWEEN CENTERS. 80" SPINDLE SPEEDS. 24) 11.2 TO 1600 RPM FEEDS ENGLISH. 62)001 TO 0.24 IPR THREADS ENGLISH. 40) 7/8 TO 48 TPI THREADS MODULE. 32)25 TO 24 MM DIAMETRAL PITCHES. 45) 1-192 TPI THREADS METRICS. 40) 0.5 TO 96 MM DIAMETER OF SPINDLE HOLE. 3-1/4" CHUCKS 3 JAWS. 12" SPINDLE NOSE. D-8 CAM LOCK RAPID TRAVERSE. 4 WAY TAILSTOCK QUILL. 5MT 5.9 TRAVEL 10 HP MOTOR. 230V/460V STEADY REST. 5" FOLLOWER REST, FOOT BRAKE.COOLANT SYSTEM,WORK LIGHT DIMENSIONS. ... more146" X 46" X 64"H WEIGHT. 7200 LBS FOR SHIPPING QUOTE PLEASE SEND A COMPLETE ADDRESS! IF ITEM IS BEING SHIPPED TO A BUSINESS OR RESIDENTIAL? WITH DOCK OR FORKLIFT? OR IF YOU WANT TO PICK UP AT FREIGHT TERMINAL. PLEASE CHECKOUT THE OTHER ITEMS FORSALE) I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. YOU CAN PICK UP FOR FREE OR BIDDER CAN ARRANGE SHIPPING. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Warner & Swasey No.3 M-4630 Square Head Ram Type Universal Turret Lathe
Warner& Swasey No.3 M-4630 Square Head Ram Type Universal Turret Lathe- S/N 2564435 Specifications: Spindle Speeds 45-2262 RPM 15 3/8" Swing over Bed 17 3/8" Max. Longitudinal Travel 8" Cross Travel 1.5" Bar Capacity Hardened Bed Ways 6 Position Turret Collet Chuck 4 Way Toolpost Hyd. Bar Feed Coolant 10/5HP AC Motor 208/3/60
|
|
|
SUMMIT 16X60 ENGINE LATHE MDL 16-3X60 GAP BED 3" HOLE INCH/METRIC
SUMMIT 16X60 ENGINE LATHE MDL 16-3X60 GAP BED INCH/ METRIC THREADING COMES WITH BUCK 3 JAW SET TRU. 16" 4 JAW, 15" FACE PLATE, RITEN 5MT LIVE CENTER AND ALL MANUALS SWING OVER BED 16" SWING OVER CROSS SLIDE 8 1/4" SWING OVER GAP 24 3/4" LENGTH OF GAP 15 3/8 SPINDLE SPEEDS(12) 30-2000 RPM INCH/METRIC THREADING HOLE THROUGH SPINDLE 3" MAIN DRIVE HP 7 1/2 COOLANT PUMP HP 1/4 WIRED 480V 3 PH PER THE MANUAL IT CAN BE WIRED 240V 3PH WITH THE CHANGE OF 2 CIRCUIT BREAKERS
|
|
|
SWEET!! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE
aims SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Custom Aerotech 4-Axis Capable CNC Benchtop Lathe in GREAT condition. Medical device corporation surplus specialized in intraocular lens implants. Unsure how unit was being used or the exact application. But as you can see, was very well crafted with high quality components. See if this setup could work for you. Also a great opportunity for the hobbyist or anyone working on their own custom build. There must be thousands of dollars in parts and setup. Good Luck& Happy Bidding! Please email richard@reliabletools.com with any questions. Components: Aerotech#1000DC Servo Motors. Aerotech#DR 500 Servo Controller Module. Aerotech Liner Stage. Volkmann#AD-2 Spindle Drive. Loadpoint ... more12.000 RPM High-Speed. 4 Goodyear#1B5 Air Springs. Unidex 500 Toolkit Version 4.18 Program. Lenstec Lens Lathe Program. Compaq Deskpro Computer. Philips Magnavox Monitor. Heidenhain EXE 610C Interpolation Digitizer Box. Specifications: X-Axis Travel: 3" Y-Axis Travel: 3" Z-Axis Travel: 360 degrees. Spindle Speed: 12.000 RPM. Spindle Drive Electrical: 380 Volt. Three Phase. Servo Module. Computer, Monitor Electrical: 115 Volt, Single Phase. Work Table: 60" x 30" x 32-1/2" tall. Overall Dimensions: 72" x 30" x 54" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE SWEET! CUSTOM AEROTECH 3-AXIS CNC BENCHTOP LATHE SWEET! CUSTOM AEROTEC
|
|
|
WARNER & SWASEY #3 SADDLE TYPE TURRET LATHE 22737
in titles& description Name: WARNER& SWASEY#3 SADDLE TYPE TURRET LATHE, Ticket# 22737, Model: No. 3, Manufacturer: WARNER& SWASEY, Item located at: Morrisville. PA, Serial# 855572(Lot 319) Condition: Used, Terms& Condition: As is where i, Selling Price: $2500.00 Description: 240 V. 2 ph, 20 Amp, 1 3/4" Thru Spindle. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
HARDINGE HLVH TOOLROOM LATHE - ALOT OF TOOLING / 3 CHUCKS
HARDINGE HLVH TOOLROOM LATHE Year: 1968/ Model: HLVH EQUIPPED Taper Attachment 5C Lever Type Collet Closer with(62) 5C Collets 6" 6-Jaw Buck" Adjust Tru" Chuck 5" Hardinge 3-Jaw Chuck 5" 4-Jaw Chuck Aloris Toolpost with(5) Tool Holders 7" Face Plate 3" Roller Steady Rest Follow Rest Indicator Holder 4-Position Turret Type Indicator Stop on Cross Slide Carriage Feed Indicator Stop 1/10 HP Gusher Coolant Pump. 3 Phase, 60 Cycle, 220 Volts 1-1/2 HP Spindle Motor. 3 Phase, 60 Cycle, 220 Volts. SPECS. Swing Over the Bed: 11" Swing Over the Cross Slide: 6-1/2" Distance Between Centers: 18" Spindle Nose: Hardinge Taper Variable Spindle Speeds: 125 to 3000 RPM Spindle Hole: 1-1/4" 5C Collet Capacity: 1-1/16" Variable Carriage Feeds: 5/16 to 7 IPM Variable Cross Slide Feeds: 3/16 to 4 IPM(36) ... moreEnglish Threads: 11 to 108 TPI. Overall Dimensions: 70" L x 32" W x 59" H. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Atlas Clausing 4803 Metal Lathe 6" 3 Jaw Chuck
Atlas Clausing Metal Lathe Model 4803 1 Phase 115V On Enclosed Base With Lots Of Tools: Turning Tools Knurling Tools Jacob Chucks General Self Centering Gages Extra Motor In Good Working Order Pick Up Only West Hartford CT
|
|
|
JET Equipment & Tools Geared Head Engine Lathe GH-1340W-3
ebay template Description Info Info JET Equipment& Tools Geared Head Engine Lathe Item Specifics: Model: GH-1340W-3 Condition: Used. Knobs missing/broken, lamp mount broken, panels detached and bent out of shape, miscellaneous pieces broken/missing, THIS ITEM WILL BE SOLD AS-IS Features: Hardened and ground gears are featured in the headstock and gearbox Headstock is constantly oiled during operation V-way bed design is induction hardened and ground Gap bed section provided for larger diameter work Independent leadscrew and feed rod Spindle actuation control is apron mounted Inch-metric dials are standard Packaging Condition: Not original Shipping information: Dimensions: 77"L x 29"W x 57"H Weight: 2000 lbs Class: 85 Handling Fee: $20.00 | Local Pickup | Quote Through FreightQuote | Quote Through Unishippers We have moved ... moreto a NEW location! Our new address is 5414 Front street Kansas City. Mo 64120(eBay pickup located off Southern street at dock 13) If you would like to pick up your item locally. Please choose“Payment on Pickup” as your shipping option when using eBay checkout. You will not pay for your item(s) at that time. Once you have checked out with eBay. We will be notified by eBay and have your item ready for pick up the next business day. You will be required to make payment at our facility at the time of pick up. We will provide a secure computer on which you can make your instant payment directly to our Paypal account. Or, you can make your payment via credit or debit card only. Sorry we are unable to accept cash. Your total will be the final sale price of the item, local sales tax, and a minimal $2 handling fee per item. Pickup hours: Monday-Wednesday 8:00am– 4:00pm. Thursday 8:00am– 2:00pm, Friday 8:00am– 5:45pm. If you wish to pay via Paypal e-check. Please email us for further instructions. Thank you Please inspect your item for damage. We can not be responsible for items once they leave our location. Shipping for U.S.A. via Truck Freight Before you Bid: Pleae note: We ship via f
|
|
|
Used Ex-Cello Fanuc CNC 3 Spindle Auto Lathe 6-Tool Screw Machine
Used Ex-Cello Fanuc CNC 3 Spindle Auto Lathe 6-Tool Screw Machine USED. IN NICE CONDITION. INCLUDES FANUC MANUAL. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 717-517-6516. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 3 Spindle THE UNIT WEIGHS APPROX. 12000 LBS. OVERALL FOOTPRINT: WIDTH: 7' LENGTH: 12' HEIGHT: 9' OTHER DETAILS: THIS ITEM IS LOCATED IN WINDSOR. CT 06095 SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE ... morePLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL
|
|
|
20" X 60" METAL LATHE 3 phase
This machine ships via a common carrier. Buyer is responsible for making arrangements to accept delivery. See below for details. 20" X 60" Metal Lathe Specifications: Swing over Bed: 20 Inch Swing over Cross Slide: 121/4 Inch Swing over Gap: 28 1/4 Inch Distance Between Centers: 60 Inch Spindle Bore: 3 1/8” Inch Spindle Mount: D1-8 Number of Spindle speeds: 12 Range of Spindle Speeds(RPM) 36- 1600 Number of Longitudinal and Cross Feed Rates: 65 Range of Longitudinal Feeds(IPR) 0.0023- 0.0937 Range of Cross Feeds(IPR) 0.0011- 0.0404 Number of Inch Threads: 26 Range of Inch Threads(TPI) 2- 28 TPI Number of Metric Threads: 22 Range of Metric Threads: 1- 14 Max Tool Size: 1 X 1 Inch Compound Slide Travel: 5 3/4 Inch Cross Slide Travel: 12 3/16 Inch Tailstock Spindle Travel: 5 7/8 Motor: 7.5 HP. 220V, 3 Phase Features& Accessories: ... more10" 3 jaw direct mount chuck with top reversing jaws 12" 4 jaw chuck 16" face plate Taper attachment 4 direction carriage rapid traverse lever. 500 Series tool post Steady and follow rest Front removable chip tray Spindle jog button One shot carriage oiler Foot brake Live center Coolant system with splash guard Metric change gears Halogen work lamp Centers and headstock center sleeve Threading dial. Tool box and tools 118” L x 44” W x 55” H Net. Wt. 6930 Lbs. This machine was a sample. There are stains on the carriage and tailstock handwheels. The compound was buffed with sandpaper and there are other minor cosmetic damages. NO WARRANTY NO PARTS NO RETURNS PLEASE CONTACT US FOR A SHIPPING QUOTE Item location: Bellingham. WA How Quickly Do You Ship Orders? Orders received before 12 noon(Eastern time) Monday through Friday, are normally shipped the same day. Once shipped, orders take approximately three to five business days to arrive. How Are Items Shipped? Items under 70 lbs. are shipped via UPS Ground. Items over 70 lbs. are shipped via truck freight. The trucking company will call you to arrange for curbside delivery. Your delivery address must be accessible b
|
|
|
Mazak QT-35N CNC Turning Center Chucker Lathe Mazatrol T32 12" 3 jaw Chuck Used
1994 Mazak QT-35N CNC Lathe Turning Center. Machine is in good running condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358 Specifications: Control…Mazatrol T32-2 Max. Bar Capacity. 2.7" Chuck. 12” Max. Swing Over Bed. 20" Max. Cutting Length. 40” X Axis Travel. 11" Z Axis Travel. 41.3" Spindle Nose. A2-8 Spindle Bore. 3.15” Spindle Speeds. 3.000 RPM Spindle Drive Motor.30 HP Turret Positions.12 Tools Equipped With: Mazatrol T32-2 Control. 12" 3-Jaw Chuck. Tool Eye. Chip Conveyor. Misc. Tool Holders. FINANCING AVAILABLE! Please contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid ... morein full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(52
|
|
|
EMCO UNIMAT SL DB 3 4 LATHE T-NUTS TEE NUTS T SLOT MODEL MAKER ENGINEER
FAST FREE RECORDED UK DELIVERY 3 T-SLOT NUTS FOR THE UNIMAT SL& DB(THIN) SLOTS M6 THREAD FOR 8 mm WIDE SLOTS THESE WILL ALSO FIT UNIMAT 3/4 AND OTHER SMALL MACHINES. SEE PICTURE 2 FOR DIMENSIONS THESE ARE USED BUT ARE FUNCTIONAL AND ARE HARD TO COME BY NOWADAYS! I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. PHOTO SHOWS GENERAL STYLE. SOME OF THESE ARE OVAL IN SHAPE MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS FREE UK SIGNED FOR DELIVERY PAYMENT OR CONTACT REGARDING PAYMENT WITHIN 24 HOURS OF AUCTION END PLEASE
|
|
|
EMCO UNIMAT 3 LATHE THREAD CUTTING ATTACHMENT MODEL MAKER ENGINEER
FAST FREE UK COURIER/SIGNED FOR DELIVERY UNIMAT 3 LATHE THREAD CUTTING ATTACHMENT COMPLETE WITH THE OFTEN MISSING STEEL DRIVE PULLEY ACCEPTS THE VARIOUS SIZED FORMERS(NOT INCLUDED) THESE UNIMAT 3 LATHES HAVE NOT BEEN MADE FOR ALMOST 25 YEARS SO OBVIOUSLY THIS IS NOT NEW CONDITION AND THE BOX IS QUITE TATTY PART OF MY CLEAR OUT OF MACHINES I NEVER USE. SEE MY OTHER ITEMS I ADVERTISE AS FOR PARTS NOT WORKING AS I CAN NOT GUARANTEE DUE TO AGE PLEASE EXAMINE PHOTO AS THIS WHAT YOU WILL RECEIVE PLEASE NOTE; MACHINES WILL BE STRIPPED DOWN FOR SHIPPING TO AVOID DAMAGE DURING TRANSIT MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS FREE UK COURIER DELIVERY WORLDWIDE SHIPPING £30
|
|
|
EMCO UNIMAT 3 LATHE MILLING DRILLING ATTACHMENT MODEL MAKER ENGINEER
FAST FREE UK COURIER DELIVERY UNIMAT 3 LATHE MILLING DRILLING ATTACHMENT M14 X 1 SPINDLE TURNS FREELY(A COMMON FAULT WITH THESE IS THE SPINDLE SEIZES AS IT IS BUSHED NOT FITTED WITH BEARINGS. THIS IS VERY GOOD! THE ACTUAL MILLING ATTACHMENT LOOKS TO HAVE HAD VERY LITTLE USE! THESE UNIMAT 3 LATHES HAVE NOT BEEN MADE FOR ALMOST 25 YEARS SO OBVIOUSLY THIS IS NOT NEW CONDITION. STILL FAR BETTER THAN THE £264(WITHOUT MOTOR! TAIWANEESE UNIMAT 4 MILLING ATTACHMENT THAT DOES NOT FIT THE UNIMAT 3! PART OF MY CLEAR OUT OF MACHINES I NEVER USE. SEE MY OTHER ITEMS QUALITY ACCESSORIES CHUCKS. COLLETS ETC. ARE STILL AVAILIBLE FOR THESE ON EBAY AT REASONABLE PRICES I ADVERTISE AS FOR PARTS NOT WORKING AS I CAN NOT GUARANTEE DUE TO AGE PLEASE EXAMINE PHOTO AS THIS WHAT YOU WILL RECEIVE PLEASE NOTE; THE MACHINE WILL BE STRIPPED DOWN FOR SHIPPING TO AVOID ... moreDAMAGE DURING TRANSIT MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS FREE UK COURIER DELIVERY WORLDWIDE COURIER DELIVERY £60
|
|
|
SIP (S.I.P) 01488 40in Wood Lathe Starter Pack with 3 x Chisels, (230v)
SIP(S.I.P) 01488 40in Wood Lathe Starter Pack with 3 x Chisels. 230v) SIP 01488 Wood Lathe 1 Metre- Starter Kit. Supplied with 3 turning tools. SIP 2 Year Warranty. SIP 01488 wood lathe has a heavy-duty 1/2 hp induction motor which gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. Features include: Twin bed bars for added stability- additional bed section is detachable for use in a confined space. Common spindle thread 3/4inch x 16 TPI. 4 speeds: 850, 1400, 2000 and 2510rpm. This trade level lathe is suitable for the hobbyist and for those just starting serious woodturning. Supplied with: 3 turning tools and tool rest, drive centre and live tailstock centre. Specification. 230v(13amp) supply 373w(0.5hp) motor Spindle thread 3/4inch x 16 TPI Spindle Speeds- 4 Speeds- 850, 1400, 2000, 2510rpm. ... moreDistance Between Centres- 1000mm(1metre) Turning Capacity Diameter- 350mm(14 inch) NVR Switch for safety Overall Length- 1200mm Weight- 27kg Packaged Dimensions(LxWxH) 900 x 370 x 220 mm
|
|
|
19x80 Leblond Servoshift Lathe Late Model With 3" Spindle Bore
This machine is near perfect condition. It was very lightly used. It is a 19x80 Leblond servo shift model 19-E7 with a 3 inch spindle hole. Included attachments are as follows: Aloris tool post with 2 holders-2 live centers-10-1/2 Jacobs drill chuck-Jacobs rubber flex collet chuck-Cushman 4 jaw chuck-Cushman 3 jaw chuck-Steady rest-Micrometer stop And some other various tooling. I will send pictures of tooling if asked) Please call me with questions or concerns. We can deliver personally. Please request a quote from us first. Jonathan 618-616-6736 mazak engine lathe le blond servo shift toolroom tool room turning center machine regal.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1430ef67f79-0x100-
|
|
|
Hendey 14"X30" Geared Head Engine Lathe 3 jaw Chuck collet closer taper gunsmith
Used Hendey swing 14"X30" geared head metal lathe model 12X30 with L1 spindle taper. This lathe has spindle speeds 19-598 rpm and threading 1.5-80tpi. Includes full chip pan. A 10" 3 jaw chuck rev jaws, taper attachment, collet closer with 15ea collets and wood case, spindle nose protector, and headstock center. It has less than 1/4 turn backlash in the crossfeed and 1/8 in the compound. It is powered by about a 5HP 3 phase motor and is currently wired for 240 volt 3Ph. The ways have some wear but cannot feel any ridges with my fingernail. It has some dinges and scratches. The bore is 1 1/2" It runs fine, all functions work as they should. This lathe weighs about 2500 lbs. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, ... moreforklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
|
|
|
Hardinge HC Chucker Super-Precision Chucking Lathe w/ 3-Jaw Chuck & Tooling
HARDINGE HC CHUCKER SUPER PRECISION LATHE 9” X 14” 3000 RPM MAX Description: Up for sale is a Hardinge Model HC Super-Precision Chucking Lathe. This Hardinge chucker is in good working and operating condition with little signs of wear or use. It features a maximum fixture diameter of 9” A maximum distance from face of the turret to the spindle of 14” and a max speed of 3,000 RPM. It comes with its original manuals, and pictured parts and tooling. SPECIFICATIONS MANUFACTURER HARDINGE MODEL HC SERIAL HC-8556-T MAX FITURE DIAMETER 9” MAX DIST FROM FACE OF TURRET TO SPINDLE 14” SPINDLE CAPACITY W/ 5C ROUND COLLET 1-1/6” TRAVEL OF CROSS SLIDE 4-½” SPINDLE SPEEDS LOW: 125-1.100 RPM HIGH: 1.100-3,000 RPM WEIGHT APPROX 1750LBS FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 ... moreLOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert wit
|
|
|
Logan 955 Metal Lathe 10"x24" 3 4 Jaw Chucks Steady Rest 110v Cart Gunsmith
Used Logan metal lathe model 955 10" by 24" Ways look decent with a minor lip and scratch's, the back way has some dings, Has a 3 jaw, 4 jaw, tool post, steady rest, wrench, quick change, 110v, collet bushing missing draw tube, mounted on custom cart with large casters. Lathe runs fine all functions work Lathe decent condition, all functions work fine. Has v belt drive to flat belt drive with back gear. Paint is worn and chipped. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally, so the auction may be cancelled due to local sale. Please read our feedback, 100 percent customer satisfaction is our goal. Payment to be received ... morewithin 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner
|
|
|
MITSUBISHI 3 POLE BREAKER NF100-CB 100 AMP 500 V MORI SEIKI SL-3A CNC LATHE
MoriSL3ACNC Our internal inventory number on this product is 6T# B4-10B Please Note: This part is from a working machine: Mori Seiki CNC Lathe. Model Number- SL-3A, S/N 2331 with Yasnac Control, New early 1980's! We have no way of testing parts once removed. Click here to go directly to a listing of JUST the inventory we have from those machines! Description: You are bidding on a Mitsubishi Circuit Breaker. Model Number: NF100-CB. 100 Amp. SEE TAG PICS FOR COMPLETE SPECS Weight: 2 lb. Dimensions: 4" x 4" x 6" Cosmetic Condition Rating: 4-Good Note: This is solely a cosmetic description of the item. This part was pulled from a working machine and is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* Free Shipping& Handling to lower 48 states ... morevia our choice of ground carrier. All Expedited Domestic Shipments pay $5.00 Boxing/ Handling/ Processing Plus shipping costs from zip 49534! All International Shipments pay $10.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested, we ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) We recommend FedEx for your international shipments. We usually get a pretty good rate from 30% 60% off on published rates. Per FedEx. These rates are subject to chan
|
|
|
REPUBLIC LAGUN FTV-2 ANILAM 3 AXIS MILLING MACHINE WITH TOOLING SOUTH BEND LATHE
REPUBLIC LAGUN FTV-2. 10X50 TABLE, VARIABLE SPEED, HARDENED WAYS, 3 AXIS ANILAM 1100 CONTROL, 3 PH POWER, SELF OILING, COOLANT PUMP, COMES WITH SOME TOOLING AND A MANUAL, PLEASE SEE PHOTOS, EXCELLENT CONDITION, RUNS GREAT, READY TO MAKE YOU $$$, COME CHECK IT OUT, LOCAL PICK-UP ONLY, CALL MR SMITH WITH QUESTIONS AND OR OTHER DELIVERY/SHIPPING OPTIONS 224-400-597FIVE
|
|
|
Hitachi Seiki LS-3 CNC Lathe
I am selling this Hitachi Seiki LS-3 CNC Lathe. It has a Fanuc 3T Controller for only $4.850 opening bid. I also have 2 other CNC Machines I am selling too. They are not included in this auction but can be purchase separately. They are 1) Valiant Turn CNC Lathe with a Fanuc 10T controller for only $4,850. It comes with the turret and the Tailstock. It has been sitting for about a month but was running before that. I am selling it for just $4,850. 2)Hitachi Seiki 5NE CNC Lathe with a Fanuc 6T controller. The machine has a little surface rust on it, but it will clean up nice. It has a large chuck. I believe it is a 15” chuck along with the Turret and the Tailstock. I am selling that for $4,850 also. Altogether they would cost $14,550, but I would be willing to sell all(3) for $13,000. I have attached photos on all 3 machines. The photos for ... moreHitachi Seiki LS-3 CNC Lathe are the first 3 photos. You can also contact me if wish to buy them before the deadline. I am pretty sure they will sell fast. Contact me through Ebay if you have any questions or at eagles1963-at-comcast-net NO SCAMMERS!
|
|
|
EMCO UNIMAT SL DB 3 4 STAR LATHE SAW TABLE MITRE GAUGE PART 1241
RARE MITRE GAUGE FOR YOUR SL OR DB LATHE SAW TABLE. PART#1241 FREE FAST AND SECURE UK DELIVERY MITRE GAUGE FOR USE WITH THE EMCO UNIMAT SAW TABLES ALSO FITS THE EMCO STAR MACHINE. PLEASE TAKE THE TIME TO READ THE CHECKOUT INSTRUCTIONS HAPPY TURNING! DUE TO REPEATED CLAIMS OF ITEMS BEING'LOST IN POST' I NOW ONLY SHIP BY RECORDED/SIGNED FOR DELIVERY. FREE SIGNED FOR UK DELIVERY WORLDWIDE TRACKED PRIORITY POSTAGE £14.50 PLEASE TAKE THE TIME TO READ THE CHECKOUT INSTRUCTIONS HAPPY TURNING! Posted with the
|
|
|
MORI SEIKI SL-3 CNC LATHE TURNING CENTER MILL MILLING -- NO RESERVE -
NO RESERVE AUCTION WITH FREE LOADING YOU CAN REACH US AT 610-521-5080 Free Shipping Quote Any where in USA- please send me your Zip MAKE: MORI SEIKI MODEL: SL-3 SN: S06238-1-10 CONTROL: YASNAC SWING 19 IN CENTER: 21 IN TURRET- SIX POSITION We just pulled this machine out of a local machine shop. The owner of this machine told us this machine runs it just needs one Hydraulic Valve. If you look at the pictures, The very last picture is the group of hydraulic valves it just needs one replaced. Please Double Check the Specs on this Machine we got them from the owner of this machine. We just picked this machine up from a local machine shop. They just replaced it with a larger machine. It was running the day it was disconnected. is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located ... morenext to the Philadelphia Air Port. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection. Some of the specs we pulled from the internet of this same machine and year: We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. We can Deliver this Machine and place it on your shop floor if you are in a 4 hour range from Philadelphia for an additional Fee. We will Load this onto any truck or trailer for FREE. Cross country Transportation: You can get a great rate by calling 1-888-651-0566This is the Trucking company that we use. Please check out our other forklifts. Machinery, and accessorizes on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocation- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
Haas ST-30T CNC Turning Center Lathe w/ Live tool Tailstock 30hp 3" Bar SL-30
2010 Haas ST30 CNC Turning Center w/ Live Tooling"Under 3.000 hours on the spindle" Machine is in excellent condition and can be seen under power as needed Specifications: Control. Haas Max Swing Over Apron. 31.5" Max Cutting Dia. 21" Max Turning Length. 26" X-Axis Travel. 12.5" Z-Axis Travel. 26" Rapid Traverse Rates. 945 IPM Max Bar Capacity. 3" Spindle Bore. 3.5" Spindle Nose. A2-6 Spindle Speeds. 3.400 RPM Max Torque. 300 ft-lb@ 500 RPM Spindle Motor. 30 HP Turret Stations. 12 Machine Weight. 16.000 lbs Machine Dimensions(Approx.150"L x 77"W x 74"H Equipped With: Live Tooling Capability Programmable Tailstock Rigid Tapping Parts Catcher Automatic Tool Presetter H
|
|
|
19x84 Leblond Servoshift Lathe Late Model With 3" Spindle Bore
Free shipping to the Midwest region of the USA. This machine is near perfect condition. It was very lightly used. It is a 19x84 Leblond servo shift model 19-E7 with a 3 inch spindle hole. Included attachments are as follows: Aloris tool post with 2 holders-2 live centers-10-1/2 Jacobs drill chuck-Jacobs rubber flex collet chuck-Cushman 4 jaw chuck-Cushman 3 jaw chuck-Steady rest-Micrometer stop And some other various tooling. I will send pictures of tooling if asked) Please call me with questions or concerns. We can deliver personally. Please request a quote from us first. Jonathan 618-616-6736 mazak engine lathe le blond servo shift toolroom tool room turning center machine regal Posted with
|
|
|
62" Inch King Vertical Turret Lathe VTL Model 472 68" Swing 40 HP 3 Head Machine
1960's Vintage 62" King VTL Vertical Turret Lathe Specifications: 3 Head Machine.Rail Ram. Rail Turrett, Side Head Diameter Of 4 Jaw Table.62" Maximum Swing.68" Maximum Under Rail.60" Table Speeds.2.3-7 RPM Feeds.0.003-0.500 Distance Between Housings.58" Vertical Travel Of Rail.48" Ram Head Travel.45" Horizontal Travel Of Rail Heads.37-1/2" Side Head Travel.30" Ram And Turret Heads Swivel.YES Rapid To All Heads.YES One Shot Lube.YES Floor Standing.YES Pendant Control.YES Main Motor.
|
|
|
Haas SL-30T CNC Turning Center Lathe Tailstock 30hp 3" Bar 30x39 Gear Box Rigid
2004 Haas ST30 CNC Turning Center Machine is in excellent condition and can be seen under power as needed Specifications: Control. Haas Chuck Size. 10" Max Bar Capacity. 3" Max. Cutting Diameter. 17" Max. Swing. 30" Distance Between Centers. 39" Spindle Speeds. 3.400 RPM Spindle Motor. 30 HP Spindle Nose. A2-8 Turret Stations. 12 Equipped With: 10" MMK 3 Jaw Chuck Chip Auger Rigid Tapping Programmable Tailstock Quick Code Programming 3.5" Floppy Disk Drive Tool Presetter High Intensity Lighting 1 MB 2 Speed Gear Box Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject ... moreto prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our
|
|
|
Used Southbend Model 400 16x40 Manual Lathe Aloris Tool Post 9" 3 Jaw Chuck
Used Southbend Model 400 16x40 Manual Lathe Specifications: Swing Over Bed.16" Distance Between Centers.40" Spindle Hole.1-7/8" Spindle Speeds(12)50-1400 RPM Feeds.4-58 T.P.I. Equipped With: 9" 3-Jaw Chuck. 2-Piece Top Jaws 10" 4-Jaw Chuck Aloris Type Tool Post Threading Dial Trav-A-Dial Work Light Inch& Metric Threading Collet Draw Tube All Miscellaneous Collets Please contact Jason Stob 708 790-3358 with any questions. FINANCING AVAILABLE! Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" ... moreand with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LLC COMPANY INFORMATION 520 Machinery Sales is a new and pre-owned equipment full service dealer out of Central and Northern Illinois. We specialize in the sale of Daewoo/ Doosan. Haas, Milltronics, Mazak, Mori Seiki, Kitamura and Miyano CNC equipment. Our goal is to maximize our customer's ability to make money by selling un-utilized(or under-utilized)
|
|
|
Logan 11" x 37" metal lathe model 1957 long bed w/3 jaw and tool post VERY NICE
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500. REPEAT. PAYPAL PAYMENT WILL NOT BE ACCEPTED ON THIS ITEM! Selling a nice little logan 11 x 37 metal lathe. It is a model 1957. It has an 11 inch swing and is 37" center to center. Machine runs very well. Currently set up for 220 volt three phase operation. Has quick change box for threading. 3 jaw logan chuck, a tool post, a left and right cutter, center for the tailstock, a flip down guard for the compound, chuck wrench, and the wrench for tool post. Machine runs very very quiet and smooth. Minimal backlash on the compound. This is one of the more well made lathes in this size we have seen, and it is in exceptionally good mechanical condition. We have new static phase ... moreconverters available for an aditional 100 dollars. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TRAILER. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. OR COME TO OUR FACILITY AND INSPECT UNDER POWER. WE WILL BE GLAD TO DO WHAT WE CAN TO ASSIST. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 200-400 DOLLARS. BUT YOU MUST CONTACT US IF YOU NEED AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
CNC Lathe - Mighty Viper VT 25B - Bar Feeder Tool Probe fanuc 18T 3.07 Bore
This is a good used Mighty Viper CNC lathe for sale Under power in my plant. Come see it run, a2-8 spindle nose. 35 HP, Has ATS collet chuck mounted with lots of Hardinge S-35 pads. Also comes with 10" 3 jaw power chuck, 12 Position Turret Fanuc 18-t control, Pnuematic bar feeder, Tool Probe, Chip Conveyor, Parts Catcher, Machine is sold as is where is. So please ask questions. I am willing to test programs etc. Deposit of 10% must be sent upon purchase within 7 days. Balance due when machine picked up, certified bank check. Will assist with arranging rigging etc. But all costs are the buyers responsibility
|
|
|
1988 Okuma LC-30-2ST 4 axis CNC Turning Center Lathe Twin Turret 3" Bar OSP Cnt
1988 Okuma LC-30-2ST CNC 4-Axis Lathe Specifications Control.OSP-5000L-G Swing Over Bed.19.69” Max. Turn Diameter.17.72” Max. Turn Length.18.9” Spindle Nose.A2-8 Spindle Bore.3.03” Spindle Motor.15 HP Spindle Speeds.3000 RPM Turret Positions(Upper)12 Turret Positions(Lower)8 Equipped with: OSP 5000L-G Control Chip Conveyor 10” Chuck Twin Turret Please call Jason Stob At: 708 790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, ... morehowever, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LLC COMPANY INFORMATION: 520 Machinery Sales is a new and pre-owned equipment full service. Stocking, dealer out of Central and Northern Illinois. We specialize in the sale of Daewoo/ Doosan, Haas, Milltro
|
|
|
1993 Star RNC 16 Swiss Type CNC Lathe Fanuc OT 3 HP 16MM FMB Mini Turbo Barfeed
1993 Star RNC 16 Swiss Type Machine is in good running condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358. Specifications: Control. Fanuc OT Spindle HP. 3 HP RPM. 300 to 8.000 Bar Capacity. 16MM-5/8" Machine Weight.2.500 Lbs Equipped With: Fanuc OT FMB Mini Turbo Magazine Barfeed Auto Unloader Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees ... moreregarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LLC COMPANY INFORMATION 520 Machinery Sales is a new and pre-owned equipment full service. Stocking, dealer out of Central and Northern Illinois. We specialize in the sale of Daewoo/ Doosan, Haas, Milltronics, Mazak, Mori Seiki, Kitamura and Miyano CNC equipment. Our goal is to maximize our customer's ability to make money by selling un-utilized(or under-utilized) CNC equipment. Do you have a machine sitting that has not been running for awhile? We can help. Are you considering trading in a used machine towards the purchase of a new machine? Are yo
|
|
|
Takisawa TS-25 CNC Lathe Fanuc 0T Control 10" Pnuematic Chuck 3" Bore 'VIDEO
254mm(10″ Pnuematic Chuck, 76.2 mm(3″ diameter Bar Capacity, 400mm(16″ Swing, 650mm(25″ Between Centres, 10 station turret, Tailstock, Fanuc 0t Control, Runs Great! Questions Call Steve@ 866-803-5202, Shipping Quotes Contact VIDEO
|
|
|
1994 WASINO 3 AXIS CNC LATHE, FANUC 0TC TAILSTOCK, LIVE TOOLING, 3" BAR CAPACITY
For sale I have a 1994 Wasino LJ6-MC three axis cnc lathe. It is equipped with: We bought this machine used about thirteen years ago. At that time. It moved into our one-man, one-shift operation with five cnc machine tools. Since then, it has run sporadically mostly threading hollow shafts. Days and weeks of power-off no use are common in our environment. While this machine almost exclusively ran steel parts, the majority were repeat runs. This lathe is in perfect running condition, and can be seen under power cutting metal at any time by appointment. Unit is equipped with: 10" hydraulic chuck Tool eye, manual, inoperative Tail stock, drag-along with programmable quill, not installed(We removed the TS long ago because it got in the way; will be happy to re-install for buyer if so desired) 12 station turret with 6 driven tool positions. ... moreChip conveyor; 5 Boring bar holders with 2.0" id; 6 od tool holders; 1 face tool holder; 160 psi external coolant pump with variable speed frequency drive. Separate coolant tray. All available manuals, including original WASINO 3-ring binder. If you want a workhorse of a machine, this is it. This Wasino may not be the latest and greatest, but it's excellent Japanese iron that was built to last forever. It's holding tight tolerances, and the third axis does all kinds of cool things. This machine is ready to make parts as soon as it arrives at your shop. While rigging out and shipping are the responsibility of the buyer, I am happy to help with these things in any way I can. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144aea73371-0x111-
|
|
|
South Bend Lathe 9" X 36" / 3 foot bed Workshop
This is a"relist" I guess I had this in the wrong category, Ebay required it to be relisted for the proper sale commission. Sorry for any inconvenience. South Bend Lathe 9" x 36" 3 foot) Bed"Workshop" The 36" 3 foot) is the entire bed length including under the spindle and tailstock. Distance between centers is 18" S/N 75965 115 volt Pick-Up Only- Located at zip code 44048(Kingsville. Ohio) If you(buyer) want to arrange shipping that is ok. The lathe is mounted to a steel table(included) as pictured. Included is the lathe. Steel table, and chuck key as picture. Lathe can be seen running on Youtube video here http:youtu.be/yspK0NBrgk8 Sorry. I do not have anything else for sale with this lathe(I.E. extra gears. Chucks, tooling) Verified Paypal Or Cash Only. NO CHECKS- NO MONEY ORDERS Adding this as questioned ... moreThe total foot print of the lathe and table to farthest points is 60" long) X 30" wide) X 49" tall) As to the weight. I can not tell you exactly however I would guess it to be around 400lbs/ 450lbs total. I am basing that on the info in this South Bend PDF file/ on page 6/ far right model(9" lathe w/ motor 3 foot bed) It shows a shipping weight of 496lbs from the factory but that would include crating and extra gears etc.
|
|
|
american pacemaker percision engine lathe 16"/20"x78" style c 220/440 v 3 phase
actual swing 21.75" swing over cross slide 14" hole through 2" d-1-6" camlock spindle nose 27 speeds 23-1500 RPM 66 thread ranges 2-120 TPI 66 feed changes.0015-0913 IPR no4 morse taper hardened and ground bedways 16"20"x78" style c 220/440 v 3 phase 11.000 lbs 5'x14'x4' floor space. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144b97c9bca-0x106-
|
|
|
STEEL SLITTING SAW TABLE UNIMAT SL DB 3 4 COWELLS LATHE
RARE EARLY STEEL SAW TABLE FOR UNIMAT WILL FIT OTHER MINI LATHES AS TABLE CLAMPS TO CROSS SLIDE. THIE TABLE HAS GOT A LITTLE BENT DURING STORAGE BUT AS IT IS MADE OF STEEL SHOULD FLATTEN OUT WITH A LITTLE BIT OF TLC I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. SEE MY OTHER ITEMS! I ADVERTISE ITEMS(LOTS MORE ITEMS THAN ON EBAY) ON MY OTHER SITE(CHEAPER AS NO FEES TO PAY! SO IT MAY BE REMOVED AND I RESERVE THE RIGHT TO DO SO! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS. HEAVY ITEM HENCE POSTAGE COSTS
|
|
|
Warmer & Swasey No. 3 Ram Type Turret Lathe, Model M-2200
Warner& Swasey No. 3 Ram Type Turret Lathe Serial#R1755933 Includes 3 Jaw Chuck. Collet Closer with collet pad set from 1/8 to 2" dia and some hex sizes. 4 way Tool Post Machine was working good when it was removed from service to make room for new machines. Call 813-935-6872 for more information.
|
|
|
1987 Mori Seiki Sl3A CNC Lathe Refurbished SL 3 Turning Center Tailstock Fanuc
1987 Mori Seiki SL 3A Chuck Size: 8" Axis: 2 Power: 20.1 hp Max RPM: 3500 rpm Swing: 22.4" Machining Length: 24" Tailstock: Yes Weight: 9240(LBS) Control: Fanuc Chip Conveyor Fanuc Control For More Information or to Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
Mazak CNC Turning Center SQT-18M Super Quick Turn Lathe w/Mazatrol T32-3 Control
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2474686 A: 0013000000CXCfg O: 0065000000QLRts PA: View Photo Gallery. Request Freight Estimate. Location: Seattle. WA 98108 Item Description. This is a no reserve auction for a Mazak CNC Turning Center SQT-18M Super Quick Turn Lathe w/Mazatrol T32-3 Control. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. This item is located on Boeing property ... morein Seattle. Washington. Rigging charges for professional removal will apply. Please see details below. Overview: Make: Mazak Model: SQT-18M Type: CNC Turning Center/Lathe Serial No: 104261 Mfg. Year: 1992 Features/Specifications: Control: Mazatrol T32-3 Capacity: Max. Swing: 20.91" Max. Machining Diameter: 11.81" Bar Work Capability: 2.52" Distance Between Spindle End& Turret End Face: 4.92" 27.56" Max. Machining Length: 20.47" Main Spindle: Spindle Power: 25 HP(30 min. Rotation Speed Range: 35-4000 RPM Electrical: 480V- 70A- 60 Hz- 3 PH Total KVA: 61 12-position turret Kitagawa 3-jaw. 10" chuck(installed) Also includes 4-jaw. 10" chuck(not shown) Jorgensen chip conveyor Includes assortment of operation manuals Dimensions& Weight: Overall(w/chip conveyor. As shown) L 149" x W 62" x H 76" Machine Weight: 9.702 lbs(from data plate) Condition: Very Good- working at time of decommission Normal wear from age& previous use in working industrial environment Regular. Thorough maintenance performed by consignor since new Rigging& Removal: This equipment is sold"as shown" at a production facility owned by The
|
|
|
EMCO UNIMAT 3 4 LATHE DRILL CHUCK MODEL MAKER ENGINEER M14 X 1 THREAD
ORIGINAL UNIMAT 3 RHOM DRILL CHUCK. WITH KEY. M14 X 1 THREAD. FREE UK SIGNED FOR DELIVERY. WORLDWIDE SHIPPING £13.00 I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. SEE MY OTHER ITEMS! I ADVERTISE ITEMS(LOTS MORE ITEMS THAN ON EBAY) ON MY OTHER SITE(CHEAPER AS NO FEES TO PAY! SO IT MAY BE REMOVED AND I RESERVE THE RIGHT TO DO SO! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
|
|
|
EMCO UNIMAT 3 4 LATHE CENTERS CENTRES MODEL MAKER ENGINEER
2 GENUINE UNIMAT 3 TAILSTOCK CENTRES. USED BUT STILL FUNCTIONAL. FREE UK SIGNED FOR DELIVERY. WORLDWIDE SHIPPING £11.00 I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. SEE MY OTHER ITEMS! I ADVERTISE ITEMS(LOTS MORE ITEMS THAN ON EBAY) ON MY OTHER SITE(CHEAPER AS NO FEES TO PAY! SO IT MAY BE REMOVED AND I RESERVE THE RIGHT TO DO SO! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
|
|
|
EMCO UNIMAT 3 4 LATHE T TEE SLOT BOLTS MODEL MAKER ENGINEER
2 GENUINE UNIMAT 3 TEE SLOT BOLTS(FIT UNI 4 AS WELL) RARE AND VERY HARD TO FIND! FREE UK SIGNED FOR DELIVERY. WORLDWIDE SHIPPING £11.00 I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. SEE MY OTHER ITEMS! I ADVERTISE ITEMS(LOTS MORE ITEMS THAN ON EBAY) ON MY OTHER SITE(CHEAPER AS NO FEES TO PAY! SO IT MAY BE REMOVED AND I RESERVE THE RIGHT TO DO SO! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
|
|
|
Southbend Turn-Nado 17x60" Lathe, Square tool post, 3 jaw Chuck, Jacobs Chuck
SOUTHBEND TURN-NADO 16 X 60" LATHE WITH A 2 1/2" + SPINDLE BORE IT COMES WITH A 12" 3 JAW CHUCK. WORK LAMP, 2 1/2"+ SPINDLE BORE. THERE'S A LINK BELOW THAT YOU CAN CLICK ON THAT WILL SHOW YOU THIS MACHINE ACTUALLY RUNNING. I'VE TRIED TO GET AS CLOSE AS POSIBLE TO THE WAYS SO YOU CAN SEE THEIR CONDITION. WE DON'T USUALLY SELL MACHINES LIKE THIS ON E-BAY, BUT WITH THE BIG BORE, THE FACT THAT IT RUNS, AND THE NAME RECOGNITION, I DON'T WANT TO SCRAP IT, BUT IF IT DOESN'T SELL IN 10 DAYS-THAT'S WHERE IT'S HEADED. YOU ARE BUYING IT WITH THE UNDERSTANDING THAT IT WAS ROAD HARD AND PUT AWAY WET, AND YOUR ARE BUYING IT"AS IS" IT IS PRICED ACCORDINGLY. WE'RE A SMALL SALES OUTFIT BENT ON SELLING GOOD USED MACHINERY AT A FAIR PRICE. JUST CHECK OUT MY PRICES VERSES MY COMPETITION. WE DON'T ... moreHAVE 15000 FEEDBACKS, LAST CHECK I THINK I'M AROUND 750 OR SO. WE'VE EARNED THEM ONE AT A TIME. CHECK OUT OUR FEEDBACKS, YOU'LL SEE TIME AND TIME AGAIN THAT I DESCRIBE MY EQUIPMENT WELL AND GET IT THERE SAFELY. VIDEO LINKS TO THIS MACHINE RUNNING VIDEO PROMO OF LEE'S MACHINERY WE'RE A FOUR MAN SHOP. LEE(MY DAD) HAS BEEN DOING THIS FOR 50 YEARS AND IS PRETTY MUCH RETIRED, MIKE(ME) WHO'S BEEN DOING THIS FOR 20+ YEARS, MEL 5 YEARS AND DENVER(MY SON) WHO BEEN HERE FOR A LITTLE OVER A YEAR NOW. NICE EQUIPMENT AT A FAIR PRICE AND WE GET IT THERE IN ONE PIECE. WE HAVE OVER 40 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING,ETC. I DON'T LIKE USING THE AUTOMATIC FREIGHT CALCULATOR. I LIKE TO PUT THE TRUCKING COMPANIES UP AGAINST EACH OTHER SO I GET SOME GOOD COMPETITIVE PRICES. JUST E-MAIL ME WITH YOUR ZIPCODE AND LET ME KNOW IF YOU CAN UNLOAD ON YOUR END VIA- LIFT TRUCK, OR LOADING DOCK. WE WILL LOAD ONTO YOUR TRUCK AT OUR LOCATION UNSKIDDED AT NO ADDITIONAL CHARGE, WE WILL CHARGE $ 100 FOR A CUSTOME SKID OR IF IT NEEDS TO BE FULLY ENCLOSED IN A CRATE WE'LL CHARGE $300 FOR
|
|
|
JET 1440-3PGH 14x40 Gap Bed Engine Lathe / 3 1/8 inch BORE through spindle
Jet 1440-3PGH 14x40 Gap Bed Engine Lathe- Model no. 1440-3PGH- S/N. JW0235- Motor. 7 1/2 HP. 3 Phase, 220/440- Swing. 14" Swing over gap. 23 5/8" Distance between centers. 40" Hole through spindle. 3 1/8" Chuck. 10" Three Jaw- Spindle Speeds. 12 Speeds 40-1600 RPM- Self contained coolant system- Steady rests Outstanding price on a quality good condition lathe! Please inquire about shipping/pickup if not local.
|
|
|
LOGAN LATHE MODEL 6561.H 14" x 45" + TOOLING 1-3/8" THROUGH HOLE
LOGAN LATHE MODEL 6561.H 14" x 45" + TOOLING 1-3/8" THROUGH HOLE Click Images to Enlarge LOGAN LATHE MODEL 6561.H 14" x 45" + TOOLING 1-3/8" THROUGH HOLE SERIAL NO: 84302 5-1/2" CENTER TRAVEL INCLUDES BUCK 8" CHUCK JACOBS CENTER CAPACITY: 1/2" TOTAL BED LENGTH: 55" SWING OVER BED: 14" SWING OVER CROSS SLIDE: 9" SMOOTH TRAVELS! VARIABLE SPEED 350- 2.000 RPM 2 HP 208-220/440 VOLTS 6.2 AMPS 1.740 RPM 3 PHASE 60 HZ MEASURES: 83" x 27" x 52" PLEASE CALL FOR WEIGHT LOADING FEE: $40 COMES AS SHOWN IN PHOTOS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item ... moredescription for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Ple
|
|
|
2013 Haas ST-20TBB Big Bore CNC Turning Center Lathe 3 inch Bar 10" Chuck 30HP
2013 Haas ST-20T BB CNC Turning Center with 3" Bar Capacity Specifications: Control. Haas Swing Over Front Apron. 31.75" Swing Over Cross Slide. 20.75" X-Axis Travel. 9.3" Z-Axis Travel. 21" Chuck Size. 10" Max Bar Capacity. 3" Max Turning Dia. 15" Max Turning Length. 21" Spindle Speeds. 3.400 RPM Spindle Motor. 30 HP Spindle Bore. 3.5" Turret Stations. 12 Machine Weight. 9.000 Lbs Equipped With: Belt Type Chip Conveyor Programmable Tailstock Parts Catcher Tool Presetter Intuitive Programming System Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if yo
|
|
|
MORISEIKI MORI SEIKI ENGINE LATHE 18" SWING OVER BED 3.7 KW MOTOR 55" BED LENGTH
MORISEIKI MORI SEIKI ENGINE LATHE 18" SWING OVER BED 3.7 KW MOTOR 55" BED LENGTH Click Images to Enlarge MORISEIKI MORI SEIKI ENGINE LATHE 55" TOTAL BED LENGTH. PNEUMATIC TAILSTOCK SPEEDS: 32- 1.800 BISON 10" CHUCK 1-5/8" TOOL HOLDER CAPACITY TOOL POST SLIDE IS NOT FUNCTIONING 3.7 KW 13 AMPS. 220/440 VOLTS SWING OVER BED: 18" 4 MORSE TAPER TAILSTOCK OVERALL MEASUREMENTS: 88" x 44" x 54" PLEASE CALL FOR WEIGHT LOADING FEE: $30 CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx ... moreFreight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped throug
|
|
|
Tornos Delta 20/3 CNC Swiss Lathe 20mm 3 Axis Screw Machine
Tornos Delta 20/3 CNC Swiss Lathe 20mm 3 Axis with Fanuc Controls(S/N 30100105) This machine was acquired BRAND NEW in 2012. And only has 942 Hours of Run Time and 490 Hours of Cut Time– See photo of Fanuc Control) Excellently maintained and machine is under power and can be viewed by interested parties. 90% of what was run on this machine was Teflon. Machine comes with Collet and Guide Bushings(1/4” 3/8” ½” 5/8” and ¾” Dia. Guide Bushless Kit, Single Bar Loader, variety of ER Collets, cutting tools, tool holders, 5+ Gallons of Vascomill 22. And spare parts that came when the machine was purchased new. Price does not include Riggers or shipping/Delivery. Rigging and delivery will be at the expense of the purchaser. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Nardini TT-1230E 12" x 32" Tool Room Lathe - 1-3/8" Thru Hole
Nardini 12" x 32" Tool Room Lathe Model TT-1230E. S# B9HGXTT641, 12" Swing, 32" Between centers, 16 Spindle speeds from 50 to 2,500 rpm, 6" 6 Jaw buck chuck, 1 3/8" Thru hole. Inch/mm Threading, Thread dial on carriage, Taper attachment, Inch/mm Hand dials on carriage, Full length chip coolant catch pan, Pull out drawer, Rear splash guard, 2hp 220v 3ph, Overall Dim. 5' 5"L x 32"W x 4'H, Est. Wt. 1,250 lbs. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the ... morebuyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
Lodge & Shipley 16" X 54" Metal Engine Lathe 10" 3-Jaw & 12" 4-Jaw Chuck
This listing is for a used Lodge and Shipley metal lathe. 16" X 54" Machine No. 34946 3 Jaw Cushman Chuck 4 Jaw Cushman Chuck w/ T slot Other misc. handles and holders included This lathe was removed from a working environment. We have not tested it but everything looks complete and appears to be in working order. This is an older machine that shows wear. But looks to be fully functional. Please ask any questions we would be happy to help. Local pick up is encouraged for these larger items. We can load this on your truck or trailer. Buyer is responsible for all shipping arrangements. A pick up time will need to be scheduled. Item can be banded to a pallet if needed. Payment is due within 5 days of auctions end and pick up is expected within 2 weeks unless other arrangements have been made. Ohio residents will have to pay a 6.75% ... moresales tax. We have a 14 day money back return policy with the buyer paying the return shipping. Check out my other items! Thanks for looking.
|
|
|
Kia KT-20S CNC Turning Center Lathe Fanuc OT Control Tailstock 8" 3-Jaw Chuck 92
1992 Kia KT-20S CNC Turning Center Specifications: Control. Fanuc OT Max Swing. 15.75" X-Axis Travel. 7" Z-Axis Travel. 20.47" Bar Capacity. 2.06" Spindle Bore. 2.24" Spindle Nose.A2-6 Spindle Motor. 10 HP Spindle Speeds. 4000 RPM Turret Stations. 12 Equipped With: Fanuc OT Control 8" 3-Jaw Chuck Tailstock Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods ... moreinclude wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All item
|
|
|
Haas SL-10T CNC Turning Center Lathe Tailstock 5C Collet 3 Jaw Chuck 2007
2007 Haas SL-10T CNC Turning Center w/ Tailstock Specifications: Control. Haas Swing Over Front Apron. 16.25" Swing Over Cross Slide. 8" X-Axis Travel. 6.25" Z-Axis Travel. 14" Rapid Traverse Rates. 710 IPM Chuck Size. 6" Max Bar Capacity. 1.75" Dist. Between Centers. 16.5" Max Turning Dia. 10" Max Turning Length. 14" Spindle Speeds. 6.000 RPM Spindle Torque. 75@ 1.300 RPM Spindle Motor. 15 HP Spindle Bore.
|
|
|
Type 3 Butt Welded HSS Centre Lathe Turning Cutting Tool Engineering Machining
ONE Type 3 Butt Welded High Speed Steel Lathe Tool The tool is UNUSED but has light storage dings on the cutting edge. Requiring dressing on a grindstone(max 20 thou' hence selling as'used' The cutting edge is HIGH SPEED STEEL ~ not tungsten carbide Approximate Size(LHW) 140mm x 20mm x 16mm ~ Photo is actual tool for sale Price Includes UK Postage/ O verseas Postage at LESS than cost Despatch is usually the same day or ONE WORKING DAY at the latest and I also post Saturday(last collection noon) Overseas bidders note! Royal Mail does NOT require TRACKING for items worth £20 or less.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146fe2350d9-0x10f-
|
|
|
1990 Mighty Turn gap bed engine lathe 21" x 80" ML-2180GL 220v 3 phase 15hp
Up for sale is a used Mighty Turn lathe. Model ML-2180GL, year 1990. 21" x 80" of travel. 220 volt, 3 phase. 15 hp, 11 kw. Weighs approx 6000 lbs. Lathe was pulled from a shop that recently downsized. Lathe was purchased with a lot of other equipment. I had a technician look at it and he said that it needs a new motor. It will not power on. Being sold as is where is. This can be seen in person in Valencia, CA 91355. Buyer is responsible for arranging and paying for freight. I can load onto a flatbed truck free of charge. Please see pics and email with questions.
|
|
|
Haas HL-4 CNC Turning Center Lathe 10" Chuck Tailstock Tool Pre 3" Bar Tool Hold
1997 Haas TL-15 CNC Turning Center with 3" Bar Capacity Specifications: Control. Haas X-Axis Travel. 11.3" Z-Axis Travel. 34" Chuck Size. 10" Max Bar Capacity. 2.5" Draw Tube Bore. 3" Max Turning Dia. 14.5” Max Turning Length. 34" Spindle Speeds. 3.400 RPM Spindle Motor. 30 HP Turret Stations. 12 Machine Weight. 14.000 Lbs Machine Dimensions…135"L x 68"W x 76”H Equipped With: Programmable Tailstock 10" 3-Jaw Chuck Tool Presetter Rigid Tap Chip Conveyor Quick Code Programming 3.5" Floppy Drive Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this
|
|
|
1998 Femco HL-40 CNC Lathe Fanuc 0m,3.54" Bore,12" Chuck
1998 Femco HL-40 Fanuc 0m Control MAX TURNING DIAMETER: 19.68" NO TAILSTOCK SWING: 25.6" MAX TURNING: 17" MAX LENGTH: 39.4" Z-AXIS) 945 IPM SPINDLE MOTOR: 30 HP CHUCK: 12" APID TRAVERSE: 945 IPM HOLE THROUGH SPINDLE: 4.33" BAR CAPACITY: 3.54" TURRET: 12 POSITIONS. RUNS GREAT! QUESTIONS CALL STEVE@ 866-803-5202. SHIPPING QUOTES CONTACT
|
|
|
lathe cnc Takisawa TX-3
Great lathe.Very rigid,lots off torque, 12" Kitagawa hydraulic Chuck,some tooling, T6 Fanuc controller,needs some new resisters in the drive but besides that everything works very well,unit is on a pallet so we can load on to a truck for the lucky person who buys it.
|
|
|
Hyundai HiT-18S CNC Lathe Turning Center w/ Tailstock 3 jaw chuck Siemens contl
1996 Hyundai HiT 18-S CNC Lathe Specifications Control. Siemens Swing over Bed. 17.32” Max Turn Diameter.11” Max Turn Length.20” X-Axis Travel.7.09” Z-Axis Travel.20.08” Rapid Traverse(X& Z) 1181 IPM Spindle Bore.3.15” Max. Bar Capacity.2.76” Spindle Speeds.3600 RPM Spindle Nose. A2-8 Spindle Motor. 20 HP Turret Postions.8 Tailstock Quill Taper…MT#4 Equipped with: Siemens Control Tailstock 3 Jaw Chuck Turbo Chip Conveyor All Available Tool Holders All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! ... moreSpecifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating o
|
|
|
Hyundai HiT-8S CNC Lathe Turning Center Tailstock 3 jaw chuck Siemens Parts Catc
1994 Hyundai HiT 8-S CNC Lathe Specifications: Control. Seimens 840C Max Swing. 11.8" Max Cutting Diameter. 6.3" Y-Axis Travel. 3.93" Z-Axis Travel. 11.4" Spindle Bore. 1.96" Max Bar Capacity. 1.57" Spindle Nose.A2-5 Spindle Speed. 6000 RPM Spindle Drive Motor. 10 HP Spindle Torque.63.5 ft/lbs Tool Capacity. 8 Station Turret Rapid Traverse-X/Z.1180/1180 IPM Approx Dimensions. 68" x 56" x 71" Approx Weight. 5800 lbs Equipped With: Siemens 840C Controller Tailstock Parts Catcher Tool Presetter(Not Functioning) 6" 3-Jaw Kitagawa Chuck(9) Boring Bar Holders(1) Face Turning Holder(7) Wedge Clamps All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Cele
|
|
|
2006 HARDINGE QUEST 10/65 3-AXIS CNC LATHE w/LIVE MILLING, 'C' AXIS, FANUC 18i-T
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 2006 HARDINGE QUEST 10/65 3-AXIS CNC LATHE w/LIVE MILLING. C' AXIS, FANUC 18i-T Ref# 153061 iammdna XCNCTC HARDINGE QUEST 10/65 3-AXIS CNC TURNING CENTER w/LIVE MILLING SERIAL NUMBER: QC-578 MFG: ... more2006 SPECIFICATIONS: SPINDLE CONFIGURATION. A2-6. 25C SPINDLE THROUGH HOLE. 2.935" ROUND COLLET CAPACITY. 2.5" SPINDLE DRIVE MOTOR. 35HP/26KW SPINDLE SPEED RANGE. 30-3.429 RPM SWING OVER WAY COVERS. 20.44" MAX. TURNING DIAMETER. 12.151" MAX. HELD BETWEEN CENTERS. 19.595" MAX. LENGTH BETWEEN CENTERS. 24.00" X-AXIS TRAVEL. 7.45" Z-AXIS TRAVEL w/10" CHUCK. 19.595" TRAVERSE RATES. X/Z. 1100/1500 IPM SQUARE SHANK TOOL SIZE. 1" ROUND SHANK TOOL SIZE. 1-1/2" LIVE TOOL SPEED RANGE. 80-8000 RPM HYDRAULIC TAILSTOCK. MT#4 APPROXIMATE WEIGHT. 12.250 LBS FOR FULL SPECS SEE HARDINGE BROCHURE ONLINE PDF FILE- http:www.hardingeus.com/usr/Used%20Machines/Quest/1193D.pdf MACHINE IS EQUIPPED WITH THE FOLLOWING: FANUC SERIES 18iT CNC CONTROL HARDINGE SURE-GRIP 10" 3 JAW POWER CHUCK HARDINGE 25C HYDRAULIC COLLET CHUCK PROGRAMMABLE TAILSTOCK 12 POSITION VDI-STYLE TURRET FULL"C" AXIS LIVE TOOLING. WITH(4) LIVE HOLDERS(SHOWN IN PHOTOS) ALL AVAILABLE ST
|
|
|
Monarch Metal Lathe, Model 771, (2) 2" Chalks, 230v 3 Phase, 14.5" Actual Swing
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Monarch Metal Lathe. Model 771, 2) 2" Chalks, 230v 3 Phase, 14.5" Actual Swing Item Description: This is a Monarch Metal Lathe: Model 771 2" Chalks.230v 3 Phase, 14.5" Actual Swing.distance ... morebetween centers 30" Mfg# 23683 Item was working in shop Forklift will be available for pickup. Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Santa Rosa. CA 95401 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 41592) nbsp, nbsp, Model: Model 771, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Features: 3 Phase, nbsp, nbsp, Date of Manufacture: 1943, nbsp, nbsp, Size: 41 84 50, nbsp, nbsp, Color: gray, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, P
|
|
|
Nice Used 1967 Tsugami Model T-SPL Chucker Lathe. 6" 3 jaw chuck, 5C collet clos
Nice Used 1967 Tsugami Model T-SPL Chucker Lathe. 6" 3 jaw chuck. 5C collet closer, 220V 3 phase. See a video of this machine under power. Follow this link Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 92867. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(CNC Machine Sales and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly ... moredisclaim any warranty of merchantability or fitness for a particular purpose of any item. We can help with shipping quotations. Please call Chuck Gerrish 714-335-5447 with and questions.
|
|
|
JET 1440-3 PGH 14" / 23" x 40" Removable Gap Bed Engine Lathe 10" 3-Jaw Chuck
ACT\Coleman Machinery Presents: USED: JET 1440-3 PGH Gap Hole Engine Lathe 60Hz 220/440 Volts Speed: 1500 r/min Swing Over Bed: 14" Swing In Gap: 23-5/8" Swing Over Cross Slide: 1-1/8" Distance Between Centers: 40" Hole Thru Spindle: 3-1/8" Spindle Nose. Camlock, Size: D1-8 12 Spindle Speeds: 40. 1,600 RPM Tailstock Spindle Center Taper: 4 Morse Tailstock Spindle Travel: 5" Feeds: Longitudinal(24) 002- 0.64 IPR Cross(24) 001- 032 IPR Threads: Inch(28) 1-7/16 to 80 TPI Metric: 22) 1- 20mm Bed Width: 8" Motor: 7- 1/2 HP Electrical Requirements: 230- 460 V/ 3-PH/ 60Hz Approx Dimensions: 88" x 45" x 49" Approx Weight: 4.070 lbs Location: Paramount CA. 90723 JET 1440-3 PGH 14" 23" x 40" Removable Gap Bed Engine Lathe 10" 3-Jaw Chuck Live Center Tool Post Shipping Information. ... moreShips to: Worldwide Shipping Weight: Approx 4.070 lbs. Location: Paramount. CA 90723, United States Product is sold as is and no warranty is implied; UNLESS EXPLICITLY EXPRESSED BY ACT/COLEMAN MACHINERY Contact seller for details and payment instructions at(562) 602-1207. ACT Coleman Inc, 16200 South Garfield Avenue. Paramount Ca. 90723.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-1484864e282-0x109-
|
|
|
3 JAW 68mm SCROLL CHUCK REVERSABLE JAWS MINI LATHE WATCHMAKER MODEL ENGINEER
WATCH MAKERS TYPE PRECISION SCROLL CHUCK. 68mm DIAMATER. NICE AND SIMPLE SYSTEM TO REVERSE JAWS AS THE JAW FRONTS JUST UNSCREW. NEEDS A BACK PLATE SO YOU WILL NEED TO MAKE ONE UP ALTHOUGH IT IS THREADED M12 X 1 ALREADY. I STRIPPED CLEANED AND LUBED IT. NICE AND SMOOTH ACTION AND NO DAMAGE TO THE SCROLL TEETH. USED ITEM BUT MAY BE HANDY TO SOMEONE FREE UK SIGNED FOR DELIVERY WORLD WIDE SHIPPING £14 I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. AND AM BREAKING FOR PARTS SOME UNIMAT LATHES SEE MY OTHER ITEMS! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
|
|
 |