In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
32100.00
Buy It Now
Condition: New
Location: Des Plaines, United States
Thanks For Taking The Time To Visit And Consider Our listing.It's Very Much Appreciated! Important Bidding/Buying Information Related To This Listing ... moreEach item is described to the best of our ability We Have Done Our Best To Describe It In Detail;However. This Is A Used Item And In Our Opinion A Good One;However, Opinions Can& Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying& What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit& Inspect It Yourself In Person;However.Should This Not Be Possible Or Practical Please Review The Photos& Ask As Many Questions As Possible So You Know What To Expect When It Arrives! Notice; This Has Been.Inspected And Tested For It's Function Only.We Can Not& Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It's Installation,Operation& Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details(1) PRE-OWNED/USED AMERICAN MACHINERY GROUP SUPER PRECISION TOOLROOM LATHE WITH INCH/ METRIC THREADING& HANDWHEELS.BUILT 1989 MODEL:AML-618*ELECTRICAL- 440 VOLTS.3PH,60HZ SPINDLE CONSTRUCTION. HARDINGE BALL BEARING SPINDLE NOSE. HARDINGE TAPER SPINDLE CAPACITY: WITH ROUND TYPE 5C COLLETS. 1-1/16" WITH STEP CHUCKS. 1-1/16" TO 6" WITH JAW CHUCKS. 5" WITH EXPANDING COLLETS. 3" VARIABLE SPINDLE SPEEDS. 125- 3.000 R.P.M. HOLE THROUGH SPINDLE. 1-1/4" SWING OVER BED. 11" SWING OVER CARRIAGE. 9" SWING OVER CROSS SLIDE. 6" DISTANCE BETWEEN CENTERS. 18" COMPOUND SLIDE TRAVEL. 3" CARRIAGE POWER FEED RANGE. 5/16- 7 I.P.M. CROSS SLIDE PO
1 2
 In 

Former Listings  
 
Boxford Hardinge 3C collet 2mm
Boxford Hardinge 3C collet 2mm Good condition See my other tools/ collets
11" x 18" Hardinge Model HLV-H High Precision Toolroom Lathe, S/N 10084T (1982)
6401- Hardinge High Precision Toolroom Lathe Manufacturer: Hardinge Model: HLV-H S/N: 10084T Year: 1982 Specifications: Swing Over Bed 11" Swing Over Cross Slide 6" Distance Between Centers 18" Spindle Speeds(Variable) 125- 3.000 RPM Spindle Nose 4 Degree Taper Hole Through Spindle 1 1/4" Feeds 3/16- 7 IPM Threads- Inch 11- 108 TPI Cross Slide Travel 6" Tailstock Quill Taper#2 MT Tailstock Quill Travel 3 3/4" Dimensions(L x W x H) 70" x 30" x 63" Weight 1.800 Lbs. Equipped With: Acu-Rite Digital Readout System 3 Jaw Chuck Lever 5C Collet Closer 2- Racks Of 5C Collets Tool Post Coolant System Splash Guard Horsepower: 1 1/2 Location: Huntington Park. CA. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. ... morePlease call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer up
11" x 18" Hardinge Model HLV-H High Precision Toolroom Lathe, S/N 9742T
Very nice Hardinge HLV-H lathe in great condition less than.0002 runout. Specifications. Assortment of collets included Swing- over bed: 11" over carriage: 9" over cross slide: 6" Distance between centers: 18" Spindle motor: 1 HP Spindle speeds: 125-3000 RPM Collet capacity: 5C Hole thru spindle: 1 1/4" Compound slide travel: 3" Power feed range: 1/4- 7 IPM Tailstock- spindle diameter: 1 3/8" travel: 3 3/4" taper: 2 Morse Range of threads: 11- 108 Thread changes: 27 Machine dimensions: 65" x 28" x 58"H Machine weight(approx. 1800 lbs Equipped with: 5C collet closer Digital Read-Out. We will load machine on your truck but you have to arrange freight Machine available for inspection if you have any questions call Genaro at(909)282-3292.
Hardinge CHNC-1 ,2 axis CNC Lathe,barfeeder & Phoenix 15hp three phase converter
Maximum Swing Over Bed 14" Maximum Threading Diameter 8" Maximum Turning Diameter 8" Maximum Fixture Diameter 9" X-Axis Travel 4.5" Z-Axis Travel 12" Maximum Weight on Spindle 75 Lbs, Maximum Dist. From Turret Face to Spindle 12.5" Spindle Nose/ Bore A2-5" 1.875" 16C Collet Capacity 1-5/8" Spindle Speed Range 50- 5.000 RPM, Spindle Drive Motor 10 HP, Number of Stations 8 Stations, Square Tool Size(Standard) 1/2" Round Tool Diameter(Standard) Up to 3/4" Indexing Time(Station to Station) 1 Second, Rapid Traverse Rates(X.Z) 400 IPM, Machine Dimensions(L x W) 91.5" x 65" Machine Weight(Approx) 6.000 Lbs, I have listed this as a( Local pick up only) or the buyer can arrange for shipping. We can load it on to your truck. We do have video of machine running and can be emailed ... moreto you upon request.
3 Boxford Hardinge 3C collets 0.050", 1/8", 3/16"
3 Boxford Hardinge 3C collets 0.050" 1/8" 3/16" Good condition See my other tools/ collets
3 Boxford Hardinge 3C collets 2mm 2.5mm and 3mm
3 Boxford Hardinge 3C collets 2mm 2.5mm and 3mm Good condition See my other tools/ collets
HARDINGE 11" x 18" SUPER-PRECISION TOOLROOM LATHE - HLV-H
If you have any questions regarding this machine. Please contact Michael@ 909) 652-1400. Make: Hardinge Model# HLV-H Serial# HLV-H-1143 Country of Origin: USA Condition: Great Features: Spindle: The Hardinge Super-Precision preloaded ball bearing spindle is mounted in a solid. One-piece totally-enclosed headstock housing for maximum rigidity and sustained accuracy. The bearings require no adjustment and are permanently lubricated to operate at all rated speeds without attention. Preloading eliminates all end play. Radial play, and assures the turning of true pieces. Collet Closer: Positive accurate workpiece gripping is fast and easy with the lever-operated collet closer. Collet tension is instantly adjustable throughout the full range from light to heavy holding power. The handwheel for the spindle provides a convenient means for rotating ... morethe spindle by hand for indicating or inspecting precision work. Tailstock: The solid. Full-bearing tailstock of Hardinge toolroom and production lathes will easily support work for between centers machining. To improve accuracy while turning work between centers. The tailstock body is of one-piece construction; it has a uniform inside diameter for precision bearing of the tailstock spindle. The handwheel is provided with ball bearings and affords a fine"feel" for precision work. The hardened and precision ground spindle of the tailstock has a travel of 3-3/4" and uses#2MT shank tooling. Carriage: A solid. Full-bearing carriage provides support for the cross slide and cutting tool to accomplish close tolerance and low micro-finish work. The dovetail design of the carriage and bed ways means that all tool-carrying slides are dovetailed together for maximum rigidity and accuracy. Sheet Teflon bearing surfaces between the carriage and the bed greatly reduce friction and permit precise gib adjustment for increased accuracy. This is a unique feature of Hardinge machines. Threading Gearbox: Hardinge Toolroom Lathes have a quick-change threading gearbox for precision. S
ONMITURN HARDINGE GANG TOOL LATHE
Great machine. 5C collet closer spindle, lots of tooling, all manuals and information to get you running. Ready to work for you, we will load on your truck.
Hardinge CHNC-1 ,2 axis CNC Lathe,12 ft.bar feeder &30 gal Castrol cutting oil
This machine comes with a 12 foot bar feeder. Parts catcher. Control is a seimens 810. We have all the maintenance and updates logs along with all the maintenance and programming manuals. Included is 8 tool holders and some misc. tooling. This machine is under power and can be seen at my business upon request. I just recently cleaned the coolant tank and baffles and replaced the pump coolant lines.I just put 30 gallons of new cutting oil in it last week( $800.00) value. The Bar feeder needs a new air relay to be put in. I have the new one. Maximum Swing Over Bed 14" Maximum Threading Diameter 8" Maximum Turning Diameter 8" Maximum Fixture Diameter 9" X-Axis Travel 4.5" Z-Axis Travel 12" Maximum Weight on Spindle 75 Lbs, Maximum Dist. From Turret Face to Spindle 12.5" Spindle Nose/ Bore A2-5" 1.875" ... more16C Collet Capacity 1-5/8" Spindle Speed Range 50- 5.000 RPM, Spindle Drive Motor 10 HP, Number of Stations 8 Stations, Square Tool Size(Standard) 1/2" Round Tool Diameter(Standard) Up to 3/4" Indexing Time(Station to Station) 1 Second, Rapid Traverse Rates(X.Z) 400 IPM, Machine Dimensions(L x W) 91.5" x 65" Machine Weight(Approx) 6.000 Lbs, I have listed this as a( Local pick up only) or the buyer can arrange for shipping. We can load it on to your truck. We do have video of machine running and can be emailed to you upon request. I just recently cleaned the coolant tank and baffles and replaced the pump coolant lines.I just put 30 gallons of new cutting oil in it last week( $800.00) value. The Bar feeder needs a new air relay to be put in. I have the new one.
HARDINGE COBRA 42 LATHE (circa 1997)
2 Axis CNC Lathe. 12 Station Turret. Programmable Tailstock. Chip Conveyor… Fanuc 21TB Series Control. Good Condition… Dependable Profit-Producer with related Tooling& available Manuals
Hardinge secondary operation Lathe, Model DV-59. 9" x 18"
AVAILABLE FOR IMMEDIATE INSPECTION UNDER POWER PLEASE FEEL TO MAKE AN OFFER AS ALL REASONABLE OFFERS ARE GREATLY CONSIDERED. Specification Description Swing, 9" Spindle Cap. 5C 1-1/16th, Length, 17" Variable Spindle Speeds, 2, Spindle Speed, 230- 3.500 RPM, Motor HP, 1 1/2 HP, Motor, 220V-3 PH/60HZ, Spindle Nose, Hardinge Tapered, Length of Bed, 36" Approximate Weight, 1.150 lbs. Travel of Top Slide, 4-1/4" Travel of Bottom Slide, 5" Travel of Tailstock Spindle, 3-1/2" Tailstock Spindle Taper, 2 MT, Equipped With Lever-Type Collet Closer for Type 5c Collets. Misc. collets, Coolant NEED HELP OR HAVE ADDITIONAL QUESTIONS! Feel Free to call us direct at 847-290-0167… ask for Ebay Sales. Don't see what you want on E-bay? Give us a call… Less than half our Inventory is on E-bay. We have new machines coming in ... moreevery week! Check out more machines online at Myers Technology Co! We suggest you Inspect All Used Machinery Prior to Purchase
Hardinge Conquest 42 CNC Turning Center, Fanuc Control, Chip Conveyor.
Hardinge Conquest T42 2-Axis CNC Turning Center. S/N SGA-1851-B. Stock# 31992 Catalog Specifications: Max Swing Over Bed- 19.5" Cross Travel(X-Axis) 5.45" Longitudinal Travel(Y-Axis) 13.65" Rapid Traverse Rate(X) 472 ipm Rapid Traverse Rate(Z) 620 ipm Turret Tool Positions- 10 Spindle Bore- 1.875" Barstock Capacity Diameter- 1.625" Spindle Speeds- 50 to 5000 RPM Approx Machine Dimensions- 91" x 76" x 70" Approx Machine Weight- 11.000 lbs. Equipped with: Fanuc 18T Control Chip Conveyor PRICE: $17.500.00 USD FOB TRUCK DAYTON OH. Just removed from service. Additional details and pictures pending. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab ... morele. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
Hardinge HLV-H Toolroom Lathe with Chuck, QC Tooling, Collets FREE Shipping
Hardinge HLV-H Toolroom Lathe. 11" swing x 18" between centers, with 5" 3 jaw Hardinge chuck, Aloris quick change tooling with(5) holders, over(65) Hardinge 5C collets, in very good condition, wired 220V 3ph, s/n HLV-H-1735(1964) Very nice toolroom lathe in excellent condition! FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: rigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate are additional charges. Item may be picked ... moreup and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged to check out this machine under power at our Phoenix facility. Please contact us for an appointment.
HARDINGE CONQUEST T-51SP SUPER PRECISION CNC TURNING CENTER
FOR MORE INFO PLEASE CONTACT: KENNY BERGER- HASCO MACHINERY 732-446-9531 HARDINGE CONQUEST T-51SP SUPER PRECISION CNC TURNING CENTER NEW: 1996 SPECIFICATIONS: SPINDLE NOSE. A2-6. 20C HOLE THRU SPINDLE. 2.378" ROUND 20C COLLET CAPACITY. 2" AC DIGITAL DRIVE SYSTEM. 20 HP SPINDLE SPEED RANGE. 50-4200 RPM MAX. SWING OVER Z-AXIS WAY COVER. 26.0" X-AXIS TRAVEL. 6.75" Z-AXIS TRAVEL. 22.875" BI DIRECTIONAL VERTICAL TURRET. 12 STATIONS(6 LIVE) HORSEPOWER RATING LIVE TOOL. 2.4HP LIVE TOOL SPEED RANGE. UP TO 3000 RPM SQUARE SHANK TOOL SIZE. 1" ROUND SHANK TOOL SIZE. 1.5" C-AXIS CONTOURING. 0.001 DEGREE BI DIRECTIONAL END-WORKING TURRET. 6 STATION ROUND SHANK TOOL SIZE. 1.5" DIST. FROM SPINDLE FACE TO TURRET. 24.25" MAX. TRAVEL. 22" APPROX. MACHINE WEIGHT. 15.000 LBS EQUIPPED WITH: FANUC 18T CNC CONTROL- ... moreTOOL SETTER- 12 STATION UPPER TURRET(6 LIVE STATIONS) C-AXIS- 6 POSITION END-WORKING TURRET- CHIP CONVEYOR- HIGH PRESSURE COOLANT- 4) LIVE TOOLHOLDERS- ALL AVAILABLE STANDARD TOOLHOLDERS& MANUALS