Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .035" inches (0.9mm) Weight: 33-lbs Roll Measurements: 10.5" inch - Spool Diameter 2" inch - Center ... moreHole (Hub) Diameter 4" inch - Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11.
Buy It Now
Free Shipping Condition: New Location: Houston, United States No solder powder is required-you do not need to use other flux powders that use aluminum alloy as a flux, but use a salt base as a coating. Very convenient ... moreand easy to solder. Excellent welding effect-due to the powder inside, the welding effect is sufficient and smooth.
Buy It Now
Free Shipping Condition: New Location: China Material: Aluminum Alloy.
Buy It Now
Free Shipping Condition: New Location: Belding, United States Ideal for high pressure grinding, EdgeCore ceramic micro-fractures during use, continuously revealing fresh abrasive grain. Also appropriate for dense ... moreand hard woods. Weight: X-wgt. Backing Material: Polyester.
Buy It Now
Free Shipping Condition: New – Open box Location: Huntington Beach, United States
Buy It Now
$2.99 Shipping Condition: New Location: China ● Length: 100mm 200mm. ● Material: Magnesium. Made of High Quality Magnesium Material with Low Tolerance and Smooth Surface. We Have a Wide Range of Raw ... moreMaterials. Good Good Quality.
Buy It Now
Free Shipping Condition: New Location: Salisbury, United States 5/8 thick 6061-T651 Aluminum plate11.375 x 8.25 x 5/8All plates are cut with the grain parallel with 11.375 dimKaiser Domestic-Made in USAMill cert available ... moreupon request120 pieces available Will ship freight
Buy It Now
$5.00 Shipping Condition: New Location: United States ZORO SELECT. Carbon Steel. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Buy It Now
Free Shipping Condition: New – Open box Location: Riverside, United States Mill Certs Availabe Upon Request.
Buy It Now
Free Shipping Condition: New Location: Dewy Rose, United States The actual shape of the chip received will vary in size.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States · Aluminum extrusion European standard can be used for automation equipment, professional 3D printers, workbenches, lasers, display racks, furniture, ... moreframe construction of fitness equipment, etc. · The high-strength Aluminum Extrusion uses 6063-T5 Aluminum alloy, and the surface is anodized to make the surface smoother and safer to use. · Considering the diversification of aluminum extrusion application scenarios, our product can be cut, and you can cut it to the length you need to meet your needs. · Once you have any problem, our team will give you the most professional answer and help you solve the problem. .
Buy It Now
Free Shipping Condition: New Location: Amherst, United States Brand New No Scratches! 3003 Alloys material are bendable. Weldable and will not rust out. If need this part to be cut down or bend we offer that service ... moreat NO extra charge to you. Just send us a message when or before purchasing this part. We work with a +/ 3/32 tolerance. Industrial Touch& Designs goal is to provide our customer with the best quality and meet all of their requirements. All within a moderate time frame.
Buy It Now
$2.95 Shipping Condition: New Location: Cleveland, United States Material : Aluminum 5052-H32. Tolerances are well within 1/8".
Buy It Now
$18.03 Shipping Condition: New Location: OSWESTRY, United Kingdom The widths available for this are 10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 75mm and 80mm. These are available in lengths of 100mm, 250mm and 500mm. ... moreThis Gauge Plate has been manufactured in the UK by Saxon Steels.
Buy It Now
$1.01 Shipping Condition: New other (see details) Location: 秀屿区, China Size: approx.1 100 100mm. 1pc x Nickel Plate. Material: Nickel. Corrosion resistance and Temperature resistance. Color: silver. Has good well antioxidant ... moreactivity. I send goods within 12 hours. Usually I will respond in 24 hours.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Comments: Ultra-Thin, Reinforced Wheel Suitable For:Steel, Stainless Steel, Aluminum, Other Alloys Size:7"× .0625" × 7/8" Diameter:7" ... moreThickness:.0625"or 1/16th Arbor Hole Size:7/8" Grit:46 Grade:T (Hard) Bond:BF (Resinoid Reinforced) Specification A60TBF Max Operating Speed:8,500 RPM Material:Aluminum Oxide Type:1 – Straight wheel Use:Right Angle Grinder Quantity:100 Discs Per Order Feature： Crafted with premium Aluminum Oxide grain, these discs are designed for fast cutting action and long life. .
Buy It Now
$8.85 Shipping Condition: New Location: Concord, United States Product Type. Product Service Code. Cleaning; Washing. Aluminum; Nickel. Water Soluble. For Use With.
Buy It Now
$8.49 Shipping Condition: New – Open box Location: Delta, United States Since we know it is hard to get smaller pieces at a good price, we try to be fair with our prices. But we promise to always keep the price at a level ... morethat these small things we miss will be worth the money you save!
Buy It Now
Free Shipping Condition: New Location: Chicago, United States Density: 7.29. Boiling Point (F): 4100. R. Atomic Mass: 118.71.
Buy It Now
Free Shipping Condition: New – Open box Location: Riverside, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Huntington Beach, United States
Buy It Now
Free Shipping Condition: New Location: San Leandro, United States Great for use for temperatures up to 900F. Good up to 900F, For Zinc, Zamak, Pewter Alloy Casting.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Crafted with premium Aluminum Oxide grain, these discs are designed for fast cutting action and long life. This reinforced wheel works great whether cutting ... morecarbon steel, stainless steel, aluminum or metals and its ultra-thin design minimizes material loss while maximizing precision. You simply will not find a higher quality cutoff wheel for a better price anywhere else… Comments: Ultra-Thin, Reinforced Wheel Suitable For:Steel, Stainless Steel, Aluminum, Other Alloys Size:4” x .040” x 5/8” Diameter:4” Thickness:.040” Arbor Hole Size:5/8” Grit:60 Grade:T (Hard).
Buy It Now
Free Shipping Condition: New Location: San Leandro, United States
Buy It Now
$8.95 Shipping Condition: New Location: Athens, United States A-36 steel. Cuts are not 100% square but close.You will receive ONE bar that is average condition in photos. Length could be + 1/8" Bar may have steel ... moremill scratches. Spects on this bar are over 1/64" under 1/64" out of square 0.023.
Buy It Now
Free Shipping Condition: New Location: Athens, United States The cuts up to + 1/8 in length.
Buy It Now
Free Shipping Condition: New Location: Rancho Cordova, United States General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good ... moreworkability, and high resistance to corrosion; widely available.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity Flux Cored Aluminum Brazing Rod Al88-Si12 (4047) 20-in for HVAC/Auto. 820F-890F (437C-477C). No manual flux application required. Non corrosive ... moreflux and ensures good oxidation protection and capillary fill.
Buy It Now
Free Shipping Condition: New Location: Belding, United States Ideal for high pressure grinding, EdgeCore ceramic micro-fractures during use, continuously revealing fresh abrasive grain. Also appropriate for dense ... moreand hard woods. Weight: X-wgt. Backing Material: Polyester.
Buy It Now
Free Shipping Condition: New Location: China U Drill 12mm Indexable Carbide Drill for Turning Boring and Drilling with insert 10PCS This indexable carbide U drill can perform multi-functional machining, ... moreincluding turning, boring, and drilling operations. The tool shank is made of high-quality tool steel and undergoes surface vacuum heat treatment, making it resistant to impact and deformation. The surface is also treated to resist corrosion and rust. The processing diameter is 12mm with an effective length of 36mm. The shank at 16mm. The blade is made of carbide with a nano coating surface, suitable for machining carbon steel, stainless steel, cast steel, cast iron, and alloy steel. The items include: 1 piece of indexable drill tool holder and 10 pieces of carbide blades.
Buy It Now
$12.99 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Wire Diameter: .035 inches (0.9mm) Weight: 33-lbs Roll 10.5 inch - Spool Diameter 2 inch - Center Hole (Hub) Diameter 4 inch - Wide Spool ... moreFeature： It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11 Package Including： 1 Pack ER70S-6 .035" (0.9 mm) Mild Steel MIG Welding Wire Notes:.
Buy It Now
Free Shipping Condition: New – Open box Location: Huntington Beach, United States
Buy It Now
$9.90 Shipping Condition: New Location: Aquebogue, United States IT WILL WELD, BRAZE, SOLDER, BEND, ROLL, PUNCH, CUT VERY NICELY WITH THE RIGHT TOOLS. Mill finish. STAINLESS, ALUM, COLD ROLLED, COPPER, BRONZE AND ZINC. ... moreNEED A DIFFERENT SIZE OR GAUGE 26, 24, 22, 20, 18 AND 16 JUST ASK.
Buy It Now
$14.35 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States
Buy It Now
$10.95 Shipping Condition: New Location: Parker Ford, United States You will get a good variety pulled from THIS pile! WE HAVE A LOT OF STUFF TO LIST SO KEEP US ON YOUR WATCH LIST! KNOW WHAT YOU ARE BUYING by letting US ... moreknow what information you need from us. Anywhere from 2" to 7" long.
Buy It Now
$16.40 Shipping Condition: New Location: Hudson, United States BRASS ALLOY 260. BRASS PLATE ALLOY 260 3/8" x 3" x 4" (.375" THICK). COPPER TUNGSTEN. COPPER ALLOY 102. As your partner it is essential that we provide ... moreyou with quality parts and impeccable service. SILVER TUNGSTEN.
Buy It Now
Free Shipping Condition: New Location: Chicago, United States Introducing the Metoro Industrial 14 Gauge 24" x 36" Mild Steel Plate, a high-quality metal plate made with exceptional strength. This durable plate is ... moremade of carbon steel, which is known for its toughness and resistance to wear and tear. Manufactured in the United States, this metal plate is perfect for various applications in the CNC, Metalworking & Manufacturing, Business & Industrial, Raw Materials, Metals & Alloys, and Metal Sheets & Flat Stock industries. With a sheet/flat stock thickness of .075, a sheet/flat stock width of 24 in, and a sheet/flat stock length of 36 in, this unit quantity of 1 steel plate is a reliable choice for your next project. Buy now and experience the quality of Metoro Steel!
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$4.00 Shipping Condition: New Location: Greenville, United States This 5/8 inch steel tube with a thickness of .120 is a top-quality product that will exceed your expectations. Measuring 12 inches in length, it is perfect ... morefor a variety of industrial and manufacturing applications. The tube's metal alloy type is steel, ensuring its durability and strength for long-lasting use. The outside diameter of the tube is 5/8 inches, providing a perfect fit for your specific project needs. This steel tube is a must-have for professionals in the metalworking and manufacturing industry. With its versatile application, it is an ideal raw material for various projects.
Buy It Now
Free Shipping Condition: New Location: Chicago, United States Weight: 0.2633. Boiling Point (F): 4100. R. Atomic Mass: 118.71.
Buy It Now
$6.90 Shipping Condition: New Location: Hudson, United States BRASS HEX ALLOY 360 1/4" X 18" LONG. BRASS ALLOY 260. As your partner it is essential that we provide you with quality parts and impeccable service. COPPER ... moreALLOY 102. We also carry the following SILVER TUNGSTEN.
Buy It Now
Free Shipping Condition: New Location: China Material: Titanium 6al-4v Grade 5. Specialized supplier of titanium alloy raw materials. Our titanium processing base in China-Baoji City. Orders can ... morebe processed quickly. Accept custom processing.
Buy It Now
$9.90 Shipping Condition: New Location: Aquebogue, United States IT WILL WELD, BRAZE, SOLDER, BEND, ROLL, PUNCH, CUT VERY NICELY WITH THE RIGHT TOOLS. Mill finish. STAINLESS, ALUM, COLD ROLLED, COPPER, BRONZE AND ZINC. ... moreNEED A DIFFERENT SIZE OR GAUGE 26, 24, 22, 20, 18 AND 16 JUST ASK.
Buy It Now
Free Shipping Condition: New Location: Colorado Springs, United States You are buying 1 piece of 1/2"x 1.5" C360 Brass H02 Solid Flat Bar 8" long +.07"/-0. Free-Cutting Brass, Copper Alloy No. C36000 (“Alloy 360”), is a standard ... morealloy of copper and zinc containing about three percent lead.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Features：.
Buy It Now
$1.89 Shipping Condition: New Location: 秀屿区, China Type: zinc plate. 5pcs x zinc sheet plate. Crystal structure: Hexagonal. Size: approx. 100 × 100 × 0.5mm. 100 ~ 150 ℃, the softened;. I send goods within ... more12 hours. Usually I will respond in 24 hours.
Buy It Now
$6.99 Shipping Condition: New Location: Falls City, United States Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling.
Buy It Now
Free Shipping Condition: New Location: Gettysburg, United States You are purchasing two pieces of 1/2" (.5") Steel Flat Bar A36, 4"X12".
Buy It Now
Free Shipping Condition: New Location: Houston, United States 4130 Normalized Alloy Steel is also known as "chromoly" combines good strength and weldability without compromising steel abrasion or impact resistance. ... moreThe normalized condition is the harder and stronger condition and used when intricate forming is not needed. Normalizing is a process that relieves internal stress on steel and improves toughness in steels.
Buy It Now
$5.00 Shipping Condition: New Location: Stryker, United States WE MAKE AND FIX NEARLY ANYTHING DEALING WITH WELDING, BRAZING, SOLDERING, FABRICATING, SHEARING, SAW CUTTING, CNC PLASMA CUTTING, MACHINING, MATERIAL ... moreSALES (STEEL, STAINLESS, ALUMINUM, PLASTIC, BRASS, COPPER), SHEET BENDING, PIPE BENDING, AND MORE.
Buy It Now
Free Shipping Condition: New Location: Evansville, United States Pure Zinc Anode Sheet 2pcs (99.995% Pure) for Zinc Plating and Zinc Electroplating, Zinc Electrode Strip 0.04"x1"x6"(1mmx25mmx150mm). The Fine Print.
Buy It Now
Free Shipping Condition: Used Location: La Fayette, United States 45 Lbs Assorted Scrap Steel Bar and/or Plate - Weldable A36 Drops. Condition is Used. The bulk will likely be 3/8 x 1 inch bar, but there are no guarantees ... moreabout exactly what you'll receive - except that the pieces will be large enough to weld for practice or art.
Buy It Now
Free Shipping Condition: New Location: Rubicon, United States (One 1/4" x 6" x 14" long flat bar made from 6061 Aluminum. Buy as many as you need. This item is not intended to have a finished surface) The pictures ... moreare representative of the item you are purchasing.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Premium quality Tweco-style high copper alloy crocodile ground clamp for arc welding. Reference part number 9205-1216. Clamp body with accessories holds ... morethe cable securely. Welding Cables & Connectors.
Buy It Now
$9.95 Shipping Condition: New Location: Parker Ford, United States KNOW WHAT YOU ARE BUYING by letting US know what information you need from us.
Buy It Now
Free Shipping Condition: New Location: Gettysburg, United States You are purchasing two pieces of 1/4" Steel Flat Bar A36, 4"X12".
Buy It Now
Free Shipping Condition: New Location: China LS252DC Leeb Hardness Tester. It easily fits in a pocket or your palm. It used lastest dual-coil technology which makes the tester to have extraordinary ... moreaccuracy: ±6 HL and good repeatability:6HL. LS252DC Leeb hardness tester is suitable for testing the hardness of materials such as steel, cast steel, alloy steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper-zinc alloy, copper-tin alloy, pure copper and forged steel.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States Instructions: Select proper gouging carbon to the size of the area being removed. Place into arc gouging torch with no more than a 6” stick out. Strike ... morethe carbon to the work piece and maintain a short arc of no more than 3/16” while holding the carbon at an approximate angle of 35-degree from the work piece.
|