Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: AWS A 5.1-04 : E7018 SIZE : 5/32" x 12" length Weight : 50 lbs (10lb x 5-pk) High Quality welding rod !!! Description: This product has undergone ... morerigorous quality testing The most cost-effective and best after-sales service Quality assurance that gives you peace of mind Package Contents: 5 Pack 5/32" 10 lbs Stick electrodes welding rod (As The Picture Shows) Notice: If you are uncertain about the item,please feel free to contact us for confirm. Full refund guarantee if does not fit. Thanks for your cooperation! .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Wire Diameter: .035 inches (0.9mm) Weight: 33-lbs Roll 10.5 inch - Spool Diameter 2 inch - Center Hole (Hub) Diameter 4 inch - Wide Spool ... moreFeature： It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11 Package Including： 1 Pack ER70S-6 .035" (0.9 mm) Mild Steel MIG Welding Wire Notes:.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this OMTech rotary axis has the capabilities to help you get the job done right. This compact rotary ... moreaxis can easily work with all 50 Watts and above OMTech CO2 Laser engravers to mark your curved surfaces.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： AWS A 5.1-04 : E6011 SIZE : 1/8" x 14" length Weight : 10 lbs High Quality welding rod !!! Package Including： E6011 1/8" x 14" Premium ... moreArc Welding Rods (As The Picture Shows) If you are uncertain about the item,please feel free to contact us for confirm. Thank you for your understanding! .
Buy It Now
Free Shipping Condition: New Location: Largo, United States Stainless Steel E316L-16 3/32" 2LBS STICK ELECTRODE WELDING ROD. E316-16 electrodes are designed for welding wrought and cast forms of similar composition. ... moreThe warranty applies to defective products.
Buy It Now
Free Shipping Condition: New Location: Belle Glade, United States This cylinder is typically used for nitrogen, helium, argon, and argon / carbon dioxide mixes. Weight Empty 46 lbs.
Buy It Now
Free Shipping Condition: New Location: Miami, United States ER70S-6 Mild Steel MIG Welding Wire. It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. C: 0.08 / ... moreMn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03.
Buy It Now
Free Shipping Condition: New Location: Melville, United States Kant Twist K020T Cantilever T-Clamp, 2" Max Opening, 800 Lb Clamping Pressure
Buy It Now
Free Shipping Condition: New Location: Largo, United States Stainless Steel TIG Wire ER309L WELDING Rods 309L 1/8" X 36" 2 LBS. 309L is of similar composition as 309 except the carbon content has been held to a ... moremaximum of. 03%.
Buy It Now
Free Shipping Condition: New Location: Pottstown, United States Eastwood welding wire is perfect for both Eastwood welders as well as other manufacturers machines. All spools are Level Wound to ensure smooth feeding ... moreand perfectly consistent wire speed.
Buy It Now
Free Shipping Condition: New – Open box Location: Golden Valley, United States
Buy It Now
Free Shipping Condition: New Location: Miami, United States ER70S-6 Mild Steel MIG Welding Wire. It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. C: 0.08 / ... moreMn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03.
Buy It Now
Free Shipping Condition: New Location: Miami, United States With PGN, you also don't just get a gasless MIG welder wire that will take your work to the next level; you get the support of an experienced team based ... moreright in South Florida. Go ahead, get MIG welding accessories you can count on.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: Deposited chemical composition: (wt%) C: 0.039 / Mn: 0.72 / Si: 0.35 / S: 0.006 / P: 0.007 Cr: 0.016 / Ni: 0.013 / Mo: 0.0001 / V: ... more0.0001 / Cu: 0.032 Product Specification: E71T-GS Mild Steel MIG Welding Wire AWS Classification: E71T-GS Weight: 10 Pounds Wire Diameter: 0.035" Inches Spool Diameter: 8" Inches Center Hole Diameter: 2" Inches Wide Spool: 2" Inches Tensile Strength (RM MPa): 510 Condition: New Warranty: 1 Year Package Include: 1 × 10lb MIG Wire Spool .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Material: Vajra Sand Color: White Applicable Model: #150 General Assembly Required: Yes Mount Type: Grinding Machine Number of Pieces: 2 ... moreNet Weight: 1kg/2.2 lbs Gross Weight: 0.9kg/1.98 lbs Product Diameter: 14.6cm/5.75in Diameter of the Largest Hole: 6.2cm/2.44inch Product Thickness: 2.1cm/0.83in Package Size: 15*15*6cm/5.91*5.91*2.36in Package Included 1 Pair* Sand Milling Sheets.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States .035, Innershield NR-211-MP, 10 lb. 12C101 LINCOLN ELECTRIC ED016354. LINCOLN ELECTRIC ED016354. Innershield NR-211-MP MIG welding wire is a versatile, ... moreall-position wire. It features fast freezing characteristics to accommodate poor fit-up.
Buy It Now
Free Shipping Condition: New Location: Largo, United States The warranty applies to defective products.
Buy It Now
Free Shipping Condition: New Location: Florence, United States ① 1 YEARS - All stick electrodes, welding tubular or solid wires and flux, self-shielded wires. Excellent bead appearance. Current type. Kiswel's Liability ... moreunder this warranty shall not exceed the cost of correcting the defect of the Kiswel Product.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States Standard grades of MIG wire to produce high quality. Welding Current for MIG process. DCEP (Electrode Positive, Reverse Polarity). ER70S-6 is a mild steel ... morewelding wire that contains. silicon content increases the fluidity of the weld pool.
Buy It Now
Free Shipping Condition: New Location: Miami, United States With PGN, you also don't just get a gasless MIG welder wire that will take your work to the next level; you get the support of an experienced team based ... moreright in South Florida. Go ahead, get MIG welding accessories you can count on.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SHARS BRAND NEW 5 PAIRS 10PCS 1-2-3 BLOCK SET NEW Product Code 303-5500(5 pairs) Product description Size within +/ 0002" Flatness and parallelism ... morewithin.0002" Squareness on all sides is 0.0003" per inch Pairs are matched to a tolerance of 0.0002" Product application Used for set-up. Layout and inspection jobs Product features Has 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes Made of hardened tool steel and precision ground on all six sides Cross drilling design allows efficient use of lower weight with maximum strength Heat treat and hardness 56 to 60 RC 2 pieces per set Weight: 2.1 Lbs per pair Shipping Charge: We always try to save shipping charges for our customers and we understand that for this 123 Blocks you will notice the shipping charge. In most cases, is almost the same as the actual item's price. This is due to the fact that the 123 block's weight is over the weight limit of US Postal Service First Class Mail service(13 ounce max weight) so we have no other available option but to offer only US Postal Service Priority Mail Small Flat Rate service or UPS ground service. We regret that we can not offer a lower shipping cost at this time and we appreciate your understanding. If you like you can also purchase these different types of 123 blocks. Please visit my Ebay store: All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. click here to visit my Ebay store now SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before bu
Buy It Now
$10.95 Shipping Condition: New Location: Parker Ford, United States You will get a good variety pulled from THIS pile! WE HAVE A LOT OF STUFF TO LIST SO KEEP US ON YOUR WATCH LIST! KNOW WHAT YOU ARE BUYING by letting US ... moreknow what information you need from us. Anywhere from 2" to 7" long.
Buy It Now
Free Shipping Condition: New Location: Florence, United States ① 1 YEARS - All stick electrodes, welding tubular or solid wires and flux, self-shielded wires. Reduces welding fatigue for increased productivity. Excellent ... morebead appearance. Current type. Kiswel's Liability under this warranty shall not exceed the cost of correcting the defect of the Kiswel Product.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Materials : ER308L / ER309L / ER316L. High Quality Tig Rods!
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Heat treated and case hardened to HRC 57-62. Made of precision-grade tool steel hardened and ground on all 6 sides of block. Accuracy and squareness ... moreon all sides within .0002". Cross drilling design allows for efficient use of lower weight with maximum strength. Dimensions- 2" × 4" × 6", 18.3 lbs. weight. Package Includes: 1 Matched Pair 2-4-6 Blocks Brand menbager MPN 402800 UPC Does not apply Instrument Type Precision Gage Block Shape Rectangular Material Hardened Ground Steel Size 2" × 4" × 6".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .035" inches (0.9mm) Weight: 44-lbs Roll Measurements: 10.5" inch - Spool Diameter 2" inch - Center ... moreHole (Hub) Diameter 4" inch - Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description: Deposited chemical composition: (wt%): C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 ... more/ Cu: 0.11 Product Specification: ER70S-6 Mild Steel MIG Welding Wire AWS Classification: ER70S-6. Wire diameter: 0.023" (0.6mm). Weight of welding wire: 10-lb Spool Diameter: 8" inch Center Hole (Hub) Diameter: 2" inch Wide Spool: 2" inch Condition: New Warranty: 1 Year Package Include: 1 Rolls ER70S-6 .023" (0.6 mm) 10 LbsMild Steel MIG Welding Wire .
Buy It Now
$18.40 Shipping Condition: New – Open box Location: Auburn Hills, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Chillicothe, United States The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized ... moredealer of this product. This product has no manufacturers warranty.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Specification： Typical Element Content (wt%) in Product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance Packaged in moisture-resistant ... moreplastic film. Product Description: Premium quality mild steel MIG welding wire ER70S-6. AWS Classification: ER70S-6. Wire diameter 0.030" (0.8mm). 10-lb weight of welding wire. 8-in spool, 2-in center hole. Package Include:.
Buy It Now
Free Shipping Condition: New Location: Frederick, United States SquareTrade © AP6.0 General Pupose Welding Electrodes Brand New 1/16" AWS E6013 Electrodes. 2 Lb. General purpose welding electrode, Easy slag ... moreremoval, Good weld penetration potential, Fast weld deposition rates, Low spatter, Two-pound tube of 1/16" diameter rods, 35-50 amp range, Tensile strength: 60.000 PSI, Melting point: 1830°-2730° Fahrenheit, Ships world-wide!
Buy It Now
Free Shipping Condition: New Location: Walton, United States Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld. E71T-GS FLUX CORE WELDING WIRE. GOOD BEAD APPEARANCE. ... moreGood bead appearance. Weight: 10 lbs. To effectively prevent the welding wire from oxidation.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States This is a box of scrap ends of bandsaw saw blades. the image shows what you will get. each box might very a bit by the width of the materials. Blades ... morevery from 1/4" x. 025 up to 2" x. 063. Can be easily removed.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States This is a Harris Oxygen-Acetylene Kit. It is still in the original unopened package. It also comes with the original box and instructions. It is a complete ... morekit for gas welding. Brazing and flame cutting. The box has the original shipping label on it, and it is dated 1982. If you have any questions please ask prior to bidding. I only ship within the U.S. Please pay within 3 days from auctions end, by Paypal only. I do not accept returns so please be sure of your bid before placing it. Thank you. Posted with
Buy It Now
Free Shipping Condition: New Location: Belle Glade, United States This cylinder is typically used for nitrogen, helium, argon, and argon / carbon dioxide mixes.
Buy It Now
Free Shipping Condition: New Location: Chicago, United States Density: 7.29. Boiling Point (F): 4100. R. Atomic Mass: 118.71.
Buy It Now
$7.99 Shipping Condition: New Location: United States Descripción Español: ALAMBRE SOLDADO MIG DE 0,07 CM X 907,18 GR. MIG - HIGH STRENGTH. WELDING SUPPLIES. ER 70S-6 Mild Steel. Contains A High Level Of ... moreManganese And Silicon For A Superior Weld, Even On Rusty, Dirty Steel.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States On-off magnetic base. Magnetic Pull.
Buy It Now
$20.00 Shipping Condition: New Location: Los Angeles, United States Application This metal shrinker stretcher is commonly used for machining additions when shaping or forming sheet metal. It is suitable for restoring cars, ... moremetal roofs, etc. Specification Color: Blue Material: Iron Model: SS-18FD Thickness: 1.2mm/18Ga Throat depth: 2.54cm/1inch Dimensions: 113*48*17cm/44.5*18.9*6.7inch Net weight: 24kg/53lbs Gross weight: 26kg/57lbs Package Included 1* SS-18FD Metal Shrinker Stretcher.
Buy It Now
$15.00 Shipping Condition: New Location: Hebron, United States Specifications： Type: Hot and cold cutter Power: 280W Voltage: 110V / 60Hz Knife width: 110mm Effective cutting width: within 100mm /4 inch Cutting length: ... more1-99999 mm /0.04-3937inch Cutting speed: 60-120 pcs / min (take 50mm as an example) Blade maximum temperature: 350 ° C Shell Material: Steel Blade Material: Steel Package Size: 55*42*39cm/21.65*16.5*15.4inch Gross Weight: 22.5kg/49.6lbs Net Weight: 20kg/44lbs The package includes: 1X Automatic Tape Cutting Machine 1X User Manual 1 X Power Cord Other Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Florence, United States Excellent bead appearance and sound X-ray quality. Served as both carbon dioxide and mixture gas, and stable arc performance in almost welding current.
Buy It Now
Free Shipping Condition: New Location: New York, United States ER70S6 is a versatile wire that is suitable for many carbon steel applications. This wire is able to be welded in all positions--flat, horizontal, vertical, ... moreand overhead. A shielding gas is required while using this wire.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States
Buy It Now
Free Shipping Condition: New Location: Miami, United States ER70S-6 Mild Steel MIG Welding Wire. It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. Deposited ... morechemical composition: (wt%).
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with ... morea minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes.
Buy It Now
Free Shipping Condition: New Location: Pomona, United States Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Polarity ... moreis DCEP Reverse Polarity. Required Shielding Gas is Argon/CO2 mix.
Buy It Now
Free Shipping Condition: New Location: Union City, United States The Push Pull Quick Release Toggle Clamp by POWERTEC. This hand tool clamp is an absolute must for any jig, tool fixture, movable base or woodworking ... moreassembly. INCLUDES: (2) Push Pull Toggle Clamp (Heavy Duty) complete with adjustable M8 screw and bolt.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 25 LB Welding Magnet, 50 LB Welding Magnet and 75 LB Welding Magnet. Holds material at 45, 90 and 135 degrees for easy welding or soldering. Use them ... morein Welding, Soldering, Assembly, Marking-off, Pipe Installation and Hanging Application.
Buy It Now
Free Shipping Condition: New Location: La Center, United States This auction is for 4 brand new 50 pound strength arrow welding magnets Use for holding 2 pieces of metal to weld angles Good for the following angles: ... more90 45 135 180 Degrees use for welding. Soldering, Assembly, marking off, pipe installation, as a floater, with a crane and many other uses Payment: You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy 100% Satisfaction Guaranteed 100% Money back Guaranteed All product exchanges must be in 100% brand new condition Please contact us within 7 days upon damaged item is received We will file claim for all buyers on damaged or lost items Exchange. Refund, or replacement will be offered upon buyers request Please contact us for more information by using"ask a question" link at the bottom of the listing Customer satisfaction is our primary goal and we will resolve any problems such as damaged. Not as described, missing parts, and lost items. Please contact us before leaving a negative or neutral feedback. Our office hours are Monday to Friday 8:00am-6pm PST. All emails will be replied within 24 hours except Sat. Sun. and US holidays. Thank you for visiting our store! Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Orders are shipped the same or next business day after payment received. We ship with Fedex ground or with the US Postal Service to physical addresses. Some items may be shipped to PO Boxes. Please inquire befor
Buy It Now
Free Shipping Condition: New Location: Duluth, United States MIG Complete Guns. MIG Gun Accessory Kits. MIG Parts - Lincoln/Tweco. MIG Parts - Miller/Hobart. MIG Parts - Bernard. 2-pk 11-lb premium quality mild ... moresteel MIG welding wire ER70S-6. Other MIG Welding Wires Available.
Buy It Now
Free Shipping Condition: New Location: Bellefonte, United States New from the Manufacturer(Bolton Metal) one(1) ingot weighing 1 pound(lb. 1 lb. = 453.592 grams or 1 lb. = 0.453592 kilograms) Item# LB210002 4470-2 Manufacturer: ... moreBolton Metal formerly Cerro Metal Eutectic Alloy Melting Temperature 117ºF or 47.2º C Contains Bismuth. Lead, Tin, Cadmium and Indium Size: 4 ¼" x 2" Thickness: ¼" Weight: approximately 1 lb. ingot Initially expands then shrinks to.0000" in 30 seconds; stable in 2 hours at-0002"per inch. Density.32 lbs.In 3 8.9 g/cc. Bolton 117(formerly Cerrolow 117) A lloy is used in jigging or fixturing delicate parts for machining(honeycomb) Dental models, prosthetic development work, proof casting(internal measurements) fusible element in safety devices, radiopaque contrast medium in X-ray, low temperature solder and many hobby(casting) applications. The shipping cost of $10.50 is for 1 lb. with insurance and tracking. MSDS Sheet will be included with all shipments. If you would like to purchase more than 1 lb. please contact us for shipping costs. If you need a certificate of analysis. Please ask and one can be sent to you- upon request only. This product contains lead and cadmium. Precautions must be taken when using this material. Safe handling procedures are a must. Always wash hands and face before eating or smoking. Use in a well-ventilated area. Please consult the material safety data sheet before using. This material must be recycled. If not, you must follow state& federal regulations regarding the disposal of lead and cadmium contained products. By purchasing or bidding on this product you certify that you are of legal age in your state and agree that you will not use this product in violation of any local. State, or federal law; you MUST read the MSDS that is shipped along with the product; and you will hold the seller and eBay harmless from any damages that may result from the use of this product.
Buy It Now
Free Shipping Condition: New Location: Miami, United States And we did just that. It creates smooth welds on 6061, 6063, 5052, 3004, 3003 and cast alloys 356.0, 357.0, 413.0, and 443.0. A 5% silicon content increases ... morepuddle fluidity for easier welding and crack-resistance for better durability.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States Standard grades of MIG wire to produce high quality. Welding Current for MIG process. DCEP (Electrode Positive, Reverse Polarity). ER70S-6 is a mild steel ... morewelding wire that contains. silicon content increases the fluidity of the weld pool.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States WELDING CABLE. WELDING CABLE ASSEMBLIES. WELDING FLUXES AND CHEMICALS. MIG GUN CONSUMABLES AND PARTS. All of our products are selected with quality and ... moreaffordability in mind. NO Answering Machines, NO Excuses.
Buy It Now
Free Shipping Condition: New Location: San Leandro, United States
Buy It Now
Free Shipping Condition: New Location: Ogden, United States New
Buy It Now
Free Shipping Condition: New Location: Huntington Beach, United States | | | | | | | Part# ALL-55500, Heat treated and case hardened to HRC 57-62, Made of precision-grade tool steel hardened and ground on all 6 sides of block, ... moreAccuracy and squareness on all sides within.0001"0002" 23 holes includes(5) 3/8-16 threaded holes for clamping and(18) untapped holes, Cross drilling design allows for efficient use of lower weight with maximum strength, Dimensions- 1" x 2" x 3" 2.1 lbs. weight, Quantity deals on 123 blocks. Parallels, sets, and inspection/set-up tooling in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We sell an entire line of machine shop tooling! Contact us for best pricing guarantee) 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international address
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： AWS A 5.1-04 : E7018 Weight : 10 lbs High Quality welding rod !!! This product has undergone rigorous quality testing Durable and easy ... moreto install and replace Quality assurance that gives you peace of mind Package Including： 1/8" Premium Arc Welding Rods Carbon Steel Electrode (As The Picture Shows) .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Material: Vajra Sand Color: White Applicable Model: #150 General Assembly Required: Yes Mount Type: Grinding Machine Number of Pieces: 2 ... moreNet Weight: 1kg/2.2 lbs Gross Weight: 0.9kg/1.98 lbs Product Diameter: 14.6cm/5.75in Diameter of the Largest Hole: 6.2cm/2.44inch Product Thickness: 2.1cm/0.83in Package Size: 15*15*6cm/5.91*5.91*2.36in Package Included 1 Pair* Sand Milling Sheets.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States SÜA - ER4043 - TIG Aluminum Welding Rod - 36" x 3/32" (10 lb. ER4043 commonly referred to as "AlSi5", has a 5% silicon and is the oldest and one of the ... moremost widely used aluminum welding wires for general purpose applications. ).
|