In 
 
Order by: 
Available to: 
Price: 
 - 
$
529.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Wilton 21500 746 740 Series Mechanic's Vise Swivel base rotates 360° and has double lockdowns ensuring maximum stability, Powder coat paint resists ... morescratches and provides a tough durable finish, Replaceable hardened steel top and pipe jaws, Large anvil work surface, Jaw Width: 6" Jaw Opening: 5-3/4" Throat Depth: 4-1/8"
$
149.99
Buy It Now
Free Shipping
Condition: Used
Location: Indianapolis, United States
TLL 04 / 20 / 2022 E27 .
$
46.00
Buy It Now
$9.50 Shipping
Condition: New
Location: Boise, United States
Highly Accurate Drilling, Tapping And Reaming On All Five Sides Of The Vise. Drill Bits. Jig Saw Blades. Bungee Cords & Tie Downs. Insert Bits. Saw Blades, ... moreGrinding Wheels. Aeronca x 12 1428. Made in Taiwan.
$
15.00
Buy It Now
$4.99 Shipping
Condition: Used
Location: Cedar Bluff, United States
please ask any questions buyer to pay S&H as per shipping quote and we will give a preferred S&H rate for combined purchases
$
167.34
Buy It Now
Free Shipping
Condition: New
Location: United States
Designed For Applications Including Drilling, Tapping And Reaming Requiring Angle Setup.
$
79.95
Buy It Now
$8.90 Shipping
Condition: New
Location: Arlington Heights, United States
$
15.00
Buy It Now
$5.90 Shipping
Condition: New
Location: Arlington Heights, United States
The stainless steel cap is. 0221 under 2 1/2' I believe a bead of sealer would take care of that.
$
90.00
Buy It Now
$10.00 Shipping
Condition: New
Location: Arlington Heights, United States
You must have 6 1/8" between center holes.
$
12.95
Buy It Now
Free Shipping
Condition: New
Location: Arlington Heights, United States
These are one pair of the 1/2-13 X 2 1/2" Carriage Bolts. The bolts standard length. It's for you guys that prefer a wrench type lock down instead of ... morethe swivel handle. These bolts fit all the machinist's vises later 350's 400S.
$
48.95
Buy It Now
$8.90 Shipping
Condition: New
Location: Arlington Heights, United States
They are stamped (4 1/2" REVERSIBLE JAW) on the top. These may be what you need.
$
249.99
Buy It Now
$110.77 Shipping
Condition: For parts or not working
Location: Middlebury, United States
Model: 101028. Jaws are smooth. Condition: For Parts or Not Working. Prefer to pick it up yourself?. To get a freight quote we will need to know the following ... moreNeed it urgently?. Call us and we will do what we can to get it to you quickly.
$
147.49
Buy It Now
$5.00 Shipping
Condition: New
Location: Newark, United States
Item : Portable Vise. Item - Vises : Portable Vise. Jaw Width : 4". Pipe Jaw Included : Yes. Opening - Vises 2 1/4 in, Throat Depth - Vises 2 in, Deep ... moreThroat No, Base Type - Vises Clamp-On Swivel, Pipe Jaw Included Yes, Reversible No, High Visibility No, Swivel Angle - Vises 45 Degrees, Jaw Face - Vises Serrated, Quick-Acting No, Material -Vises Ductile Iron, Jaw Type Replaceable.
$
55.95
Buy It Now
$8.90 Shipping
Condition: New
Location: Schaumburg, United States
The holes are 2 3/8" on centers. These are made from the highest quality steel heat treated and should last for many years, if used properly, will give ... moreyou many years of life. Unlike OE Wilton jaws, these are made here in the USA.
$
480.26
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
WILTON 11696. Machine Vise, Cross Slide, Stationary Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 in, Overall Length (In.). ... more9-1/2, Overall Height (In.). 7-1/4, Max. Travel 7-9/10 in in both X and Y Directions, Bed/Base Ductile Iron, Cast Side Knobs, Durable Base has 5 Bolt Lugs for Easy Mounting on a Machine Table.
$
70.41
Buy It Now
Free Shipping
Condition: New
Location: United States
Store Search search Title. ISBN and Author Estimated delivery 3-12 business days Format Condition Brand New Wilton 69997 4-Inch Drill Press Vise With ... moreStationary Base. 1-PackFits Most Drill PressesHardened Steel Jaws4-Inch Flat Drill Press Vise Has Easy Mounting Slots And Unique Pivot Handle Design For Extra Clamping Pressure. ISBN ISBN-13 0019907699972, Title Wilton 69997 4-Inch Drill Press Vise With Stationary Base. 1-Pack, Dimensions 5.3 in. x 2.5 in. x 9.3 in. GE_Item_ID:78605595; Grand Eagle Retail is the ideal place for all your shopping needs! With fast shipping. Low prices, friendly service and over 1,000,000 in stock items- you're bound to find what you want, at a price you'll love! Shipping is FREE to any address in USA. Please view eBay estimated delivery times at the top of the listing. Deliveries are made by either USPS or Courier. We are unable to deliver faster than stated. International deliveries will take 1-6 weeks. NOTE: We are unable to offer combined shipping for multiple items purchased. This is because our items are shipped from different locations. If you wish to return an item. Please consult our Returns Policy as below: Please ensure that you contact Customer Services and request a Returns Authorization before you send the order back to us. Returns which are not prearranged cannot be accepted. If you wish to request a return. Please ensure you contact us within 10 business days of delivery. Returned goods must be received within 30 days of the original shipment to the customer. Returns must be in resellable condition. Any returns are shipped at the customer's risk. Grand Eagle Retail does not take responsibility for items which are lost or damaged in transit. Accepted returns will be refunded by the method by which you paid. For purchases where a shipping charge was paid. There will be no refund of the original shipping charge. For purchases where shipping was free. Returned items will be refunded less a restocking fee of 10% If you have any questions please feel free to Con
$
358.31
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
WILTON 11748. Machine Vise, Low Profile, Jaw Width (In.). 8 in, Jaw Opening (In.). 8 in, Throat Depth (In.). 2 in, Overall Length (In.). 11, Overall Height ... more(In.). 3-9/16, Base has Four 1/2 in Shoulder Slots for Quick, Easy Positioning on the Machine Table, Hardened V Grooved Jaws Hold Round Shaped Objects Both Vertically and Horizontally.
$
23.00
Buy It Now
$3.95 Shipping
Condition: New – Open box
Location: Arlington Heights, United States
The ID is 1.64 or close and the thickness With a bead of sealer this should fit nicely. Is plug may not fit on models 1998 and later.
$
99.00
Buy It Now
$13.95 Shipping
Condition: New
Location: Arlington Heights, United States
Everything is OE Wilton including the 12MM 1.75 swivel handles.
$
79.95
Buy It Now
$7.90 Shipping
Condition: New
Location: Arlington Heights, United States
$
599.99
Buy It Now
$66.79 Shipping
Condition: Used
Location: Dayton, United States
Manufacturer: WILTON. ITEM TITLE. YOU ARE PURCHASING THE PICTURED. / LABELING PRODUCT SPECIFICATIONS AND / OR LABELING.
$
89.00
Buy It Now
$8.90 Shipping
Condition: New
Location: Arlington Heights, United States
They are quality steel tempered to provide years of service.
$
98.00
Buy It Now
$91.00 Shipping
Condition: Used
Location: Glassboro, United States
Vintage Scout Mechanics 4 1/2" Bench Vise Vintage Wilton Scout Mechanics 4 1/2" Bench Vise With Swivel Base And Pipe Jaws This auction is for ... morea Vintage Scout Mechanics 4 1/2" Bench Vise Vice with Swivel Base. It has removable 4 1/2" serrated jaws. It has built-in pipe jaws. Scout was introduced by Wilton in 1953 and was discontinued in the early 1970's. It is marked"Scout 4 1/2 USA 8C-55 9C-55" on one side and"Scout 4 1/2 USA" on the other. It is in very good working condition as shown. The vise weighs about 15 lbs before packaging. It will be shipped in a large flat rate box. See additional pictures below. I am shipping in the USA only at this time.
$
62.95
Buy It Now
$7.90 Shipping
Condition: New
Location: Arlington Heights, United States
These are upgraded USA steel heat treated and will give you years of service. Unlike the Wilton imports, these jaws are made here in the USA from Quality ... moresteel heat treated. never tighten small rods or screws in any serrated jaws.
$
45.00
Buy It Now
$8.90 Shipping
Condition: New – Open box
Location: Arlington Heights, United States
Fits all Tradesman's 1740. One photo shows the base design you must have. Wilton changed the thread to 12MM X 1.75. These are sold in pairs only.
$
309.00
Buy It Now
Free Shipping
Condition: New
Location: Lincoln, United States
This general-purpose bench vise is ideal for clamping down lumber, pipe, and more while you drill, saw, or fasten. Built for rugged use and extended life, ... morethe Wilton Tools Utility Bench Vise is ready for years of heavy-duty use.
$
125.00
Buy It Now
$8.95 Shipping
Condition: New
Location: Arlington Heights, United States
These jaws are 6 1/8"Wide X 1 1/4 High X 5/8" Thick with holes 4" on centers and they have the hole for the pin i. Wilton's part # is 2907370.
$
44.95
Buy It Now
$5.95 Shipping
Condition: New – Open box
Location: Arlington Heights, United States
This collar is nominally. 285” thick (+/- a thousandth or two) and made of USA-sourced stainless steel. This collar fits the older generation “Chicago” ... morevises 1954 and later, 940, 945, Schiller Pk.
$
125.95
Buy It Now
$8.90 Shipping
Condition: New
Location: Arlington Heights, United States
6" Wide, 1 1/2"High 1" Thick with the holes in back 3/8 and 4" on center. Small round objects will flatten serrations on any jaw.
$
187.99
Buy It Now
Free Shipping
Condition: New
Location: Livonia, United States
Powered by Frooition Pro Shop Search. Wilton Warren Mechanic's Vise- 21300. Steel. Swivel Base, 4" Jaw Width, 4-1/2" Jaw Opening, 3-7/16" ... moreThroat Depth, 1/4" to 2" Pipe Jaw Capacity. Item# JWL21300. Click to close full size. Description: Large anvil work surface. Heavy duty 30.000 PSI castings for long life and added strength. Swivel bar rotates 360 and has double lockdowns ensuring maximum stability. Powder coat paint resists scratches and provides a tough durable finish. Replaceable hardened steel top and pipe jaws. Shipping This item ships UPS. Items Shipping by UPS or DHL Most customers will receive their order in 3-7 business days as we ship from a network of manufacturers' warehouses across the United States. Items Shipping by Freight Items shipped via freight carrier will not ship until we've spoken with you to confirm delivery arrangements. Once we've received your order we will contact you to make those arrangements. Please feel free to contact us any time you have a question regarding your order. Our customer service number is 877-367-0047. Freight deliveries do not include inside delivery. Freight deliveries are tailgate/dock delivery(the driver will bring the item(s) to the rear of the truck but will not assist you in bringing the item(s) inside) Inside delivery and/or setup is available in some metropolitan areas for an additional charge. Contact us at 877-367-0047 for an inside delivery quote. Freight deliveries cannot be scheduled. However, we can request that the trucking company call before attempting delivery. A SIGNATURE IS REQUIRED for all freight deliveries, therefore, someone must be available during business hours to sign for a freight delivery. Please note any visible damage on the bill of lading/delivery ticket before signing for the shipment. You may also refuse delivery of any damaged items. If you do so. Please contact us immediately so we may expedite a replacement for you as we WILL NOT be notified by the freight carrier for any refusals and no
$
100.00
Buy It Now
$18.00 Shipping
Condition: New
Location: Boise, United States
Untitled Document Product Name: Wilton 11614 ML45 4-1/2-inch Low Profile Milling Machine Vise Includes: 1) Wilton 4-1/2 Low Profile Milling Machine Vise ... moreDescription: Features General purpose vise for both milling and grinding applications Ideal for applications where low overall height is necessary Durable construction with fine grain cast iron castings and hardened smooth vise jaws Ground Vise Bed for smooth. Consistent, and precise jaw movement Zinc plated ACME threaded screw provides consistent clamping pressure and durability Highly accurate with beds and bases parallel to Optional 360 Specifications Jaw Width(In. 37347 Opening Capacity Max(In. 4 Jaw Depth(In. 37987 United States: FREE LTL Shipping* In the contiguous 48 states(6-18 Day normal delivery time) Currently shipping for this item is available to the contiguous 48 US states only. Shipping is not available to Alaska or Hawaii. Due to the size and weight of many Freight items. Some Freight items are shipped directly from the manufacturer. If this is the case, it is possible for the manufacturer to be backordered on a product. We will notify you of any backorder situations and give a timeframe at which time you can decide if you would like to wait or receive a full refund for your purchase. We try to minimize backorder situations as much as possible but it does occasionally occur. Free shipping applies to business address with a fork lift. Loading dock, or customer pick-up at the local shipping terminal ONLY. Residential businesses do not qualify as a business address. Contact us before purchasing if you prefer local pickup. If shipping to a residence. Your shipping location must be accessible by a tractor-trailer truck. Truck drivers will not assist in unloading. Please be prepared for this type of delivery, as you are responsible for unloading. There may be additional charges for delivery to residential addresses up to $50, we will contact you before shipping if there are any additional charges such as limited access, wait fees, or lift
$
138.31
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
WILTON 2908080. Jaw Inserts,6-1/2 x 5/8 x 1",PK2. Order Acceptance. Grainger reserves the right to accept or reject any order. Jurisdictions have varying ... morelaws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
$
1648.26
Buy It Now
$30.00 Shipping
Condition: New
Location: Minooka, United States
Opening - Vises 7 in, Throat Depth - Vises 4 3/4 in, Deep Throat No, Base Type - Vises Swivel, Pipe Jaw Included Yes, Pipe Capacity - Vises 1/4 in to ... more3-1/2 in, Reversible No, High-Visibility No, Swivel Angle - Vises 360 Degrees, Jaw Face - Vises Serrated, Quick-Acting No, Material -Vises Cast Iron, Jaw Type Replaceable.
$
59.00
Buy It Now
$8.90 Shipping
Condition: New – Open box
Location: Arlington Heights, United States
Fits all Tradesman's 1750. 1755, 1760, 1765, that takes these cleats and newer design Wilton handles. One photo shows the base design you must have. Wilton ... morechanged the height however the threads are still 1/2-13.
$
59.95
Buy It Now
$8.50 Shipping
Condition: New
Location: Arlington Heights, United States
It's a pair of OE 2905200 plated Wilton handles and cleats and bolts.
$
389.99
Buy It Now
$62.38 Shipping
Condition: Used
Location: Middlebury, United States
Model: 1745. 3" throat. Weight (lbs, oz): 39. Need it urgently?. Call us and we will do what we can to get it to you quickly. Prefer to pick it up yourself?. ... moreWill there be a dock or forklift. Unless otherwise specifically agreed to in writing by.
$
48.00
Buy It Now
$9.57 Shipping
Condition: New
Location: Wayland, United States
Made from 100% copper. Jaw Width (In.). Width 3.7000. Height 1.4000.
$
46.00
Buy It Now
$8.98 Shipping
Condition: New
Location: Wayland, United States
Made from 100% copper. Jaw Width (In.). Width 3.4000. Height 1.3000.
$
325.00
Buy It Now
Free Shipping
Condition: Used
Location: Anadarko, United States
Wilton model 311 Power Arm work holding Fixture with a vise holder..
$
1229.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
The Wilton 3-Axis Tilting Drill Press Vise is the perfect vise for 3-axis jobs in milling, drilling, grinding, shaping and jig boring. Bases have keyways ... moreand bolt slots for machine mounting. Handles qty. 1, Jaw Capacity in. 5, Jaw Length in. 5, Material Steel alloy casting, Mount Type 360 swivel. Ideal for 3-axis jobs in milling, drilling, grinding, shaping and jig boring Vise bodies are constructed of close grained, high tensile, seasoned alloy castings Ergonomically designed all steel handles with spring-loaded ball attachment Durable polychromatic finish Jaw plates hardened and ground Hardness of jaws 55 3 HRC No jaw tilt Accurately indexed for 3 way angular work All ground surfaces are made to close accuracies 360 swivel base 45 tilting range on either side 90 vertical indexing.
$
173.60
Buy It Now
Free Shipping
Condition: New
Location: United States
The Westward 10D747 4" Drill Press Vise is the perfect vise for drilling, tapping and reaming. This machine vise features a stationary base that provides ... moreyou with solid support when in use. The precision cut coarse thread adjusting screw allows you to quickly drill, tap or ream any material.
$
69.95
Buy It Now
$8.50 Shipping
Condition: New
Location: Arlington Heights, United States
This Wilton style jaws fit the Tradesman 1755 and are 5 1/2" Wide 1/2" Thick & 3/4" high with C-C of 2 3/8" taking 1/4" screws. and are not reversible. ... moreYes, the OE Wilton are cheaper however the quality cannot be compared.
$
89.39
Buy It Now
$9.57 Shipping
Condition: New
Location: Wayland, United States
Made from 100% copper. Jaw Width (In.). Width 3.4000. Height 1.4000.
$
89.00
Buy It Now
$7.90 Shipping
Condition: New
Location: Arlington Heights, United States
$
48.00
Buy It Now
$7.90 Shipping
Condition: New
Location: Arlington Heights, United States
The MFG of your vise is not important. The center of the hole is offset exactly 1/4" from the bottom of the jaw. Photo is a gallery photo.
$
69.95
Buy It Now
$8.90 Shipping
Condition: New
Location: Arlington Heights, United States
$
359.95
Buy It Now
$68.08 Shipping
Condition: Used
Location: Boyertown, United States
Schiller Park, Ill. Wilton 9400 Bullet Vise. 4" wide jaws. Opens and closes smoothly. 6-3/4" base.
$
125.00
3d 18h 32m 7s
0 bids
$190.00 Now
$18.03 Shipping
Condition: Used
Location: Worcester, United States
Estate Sale Find Vintage WILTON 4" Jaw Heavy-Duty Machinist ~ Swivel Base"Bullet" ~ Bench Vise Schiller Park ILL. U.S.A. This vintage WILTON ... moreBench Vise is in nice cosmetic& working condition and is yours to win on this NO RESERVE eBay auction. Features a 4" Jaw and opens to 6 1/2" to 7" Throat depth 3" This HEAVY-DUTY WILTON vise weighs a whopping 48 lbs! Made in Schiller Park. ILL. U.S.A. Numbers on top portion of vise reads 101028& 101027. Numbers on bottom of base reads SF 101081& 101082. Please see all photos with eBay's nice ZOOM feature. Lucky winner to pay shipping/ handling via U.S. Parcel Post Mail Service or U.P.S. Ground Service.
$
479.00
Buy It Now
Condition: For parts or not working
Location: Birmingham, United States
Inventory Number: 04220140037. Manufacturer: WILTON. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload ... moreloads (flat bed, step deck, double drop, etc.).
$
110.00
Buy It Now
$8.50 Shipping
Condition: New
Location: Arlington Heights, United States
This one has no clip.
$
69.01
Buy It Now
$9.57 Shipping
Condition: New
Location: Wayland, United States
Made from 100% copper. Jaw Width (In.). Width 3.4000. Height 1.3000.
$
10.00
Buy It Now
$6.95 Shipping
Condition: New – Open box
Location: Arlington Heights, United States
The ring shown is not included. Your bottom must look like the last photo.
$
399.99
Buy It Now
$62.38 Shipping
Condition: Used
Location: Middlebury, United States
Model: 1745. 3" throat. Handle is straight. Weight (lbs, oz): 39. Need it urgently?. Call us and we will do what we can to get it to you quickly. Prefer ... moreto pick it up yourself?. Will there be a dock or forklift.
$
115.00
Buy It Now
$30.10 Shipping
Condition: Used
Location: Hulbert, United States
We will provide any information needed. We are not experts in these fields and so may not be able to give you the answers you require. You are only buying ... morethe item(s) pictured/described.
$
1099.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: North Salt Lake, United States
For YOU, we constantly strive to find ways to improve our performance.
$
33.21
Buy It Now
$8.98 Shipping
Condition: New
Location: Wayland, United States
Made from 100% copper. Jaw Width (In.). Width 3.2000. Height 1.0000.
$
55.95
Buy It Now
$5.00 Shipping
Condition: New
Location: Arlington Heights, United States
This collar fits all the 800S's swivel and stationary and the screws.
$
249.99
Buy It Now
$62.38 Shipping
Condition: For parts or not working
Location: Middlebury, United States
Model: 1745. The vise does not close all the way, we can get it to close until about the last 1". Jaw 4-1/2". 5" Opening. Condition: For Parts or Not ... moreWorking. Need it urgently?. Call us and we will do what we can to get it to you quickly.
$
398.00
Buy It Now
$27.00 Shipping
Condition: Used
Location: Brattleboro, United States
This has 2 axis of tilt, plus features a swivel base. with the item.
$
1429.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
The Wilton 3-Axis Tilting Drill Press Vise is the perfect vise for 3-axis jobs in milling, drilling, grinding, shaping and jig boring. Bases have keyways ... moreand bolt slots for machine mounting. Handles qty. 1, Jaw Capacity in. 6, Jaw Length in. 6, Material Steel alloy casting, Mount Type 360 swivel. Ideal for 3-axis jobs in milling, drilling, grinding, shaping and jig boring Vise bodies are constructed of close grained, high tensile, seasoned alloy castings Ergonomically designed all steel handles with spring-loaded ball attachment Durable polychromatic finish Jaw plates hardened and ground Hardness of jaws 55 3 HRC No jaw tilt Accurately indexed for 3 way angular work All ground surfaces are made to close accuracies 360 swivel base 45 tilting range on either side 90 vertical indexing.
$
1129.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
The Wilton 2-Axis Angular Drill Press Vise is the perfect vise for applications where the workpiece requires machining on an angle. Bases have keyways ... moreand bolt slots for machine mounting. Handles qty. 1, Jaw Capacity in. 6, Jaw Length in. 6, Material Steel alloy casting, Mount Type 360 swivel. For applications where the workpiece requires machining on an angle Vise bodies are constructed of close grained, high tensile, seasoned alloy castings All ground surfaces made to close tolerances Ergonomically designed all steel handle with spring-loaded ball attachment Jaw plates hardened and ground No jaw tilt Hardness of jaws 55 3 HRC 90 vertical and 180 horizontal indexing 360 swivel base 90 tilting range Perfectly indexed for angular work Relief in the clamp seat ensures complete surfac.
1 2 3 4 5 6 7 8 9 10 11 12
 In 

Former Listings  
 
Wilton Tool Electronic Vise with Complete Work Center in Base Bench
This set came from government Surplus and Includes: Wilton Tool Electronic Vise FLOTRON INDUSTRIES PRINTED CIRCUIT BOARD HOLDER VISE Electronic Board Holder All the items for sale in this listing are shown in pictures and they are in Very good working and cosmetic shape. COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot ... morefix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCyberOffice The place for all your tools. Military surplus and much more needs Visit my eBay Store: MyCyberOffice On Aug-30-13 at 08:01:18 PDT. Seller added the following information:
WILTON Machinist 1962 Bullet Vise Swivel Base 3" Jaws 9300N 8300N FREE SHIPPING
Nice used Wilton Vise Fresh paint The two rods for the swivel locks are not 100% perfect slight bends and marks Very nice vice that should last a lifetime weighs about 25 pounds comes with free shipping united states only no international shipping
Early Vintage Wilton Tool Corp. Pat. Pend. # 4 Bullet Swivel Base Vise HD 36 lbs
This very early. Patent pending#4 swivel base vise, by Wilton Tool Corp. is in very good used condition, straight from estate garage. No broken or chipped parts that I can see. This weighs about 36 pounds, has 4" steel jaws and and opens to 6" The base has a 13-4 on the bottom. Use the zoom to confirm the condition.
6" WILTON 656 SWIVEL BASE BENCH VISE,WITH PIPE JAWS
GOOD CONDITION. JAWS OPEN TO 6"
Wilton 646 Vise - 6" Jaw Width, Swivel Base W/ Mouting bolts excellent condition
This Wilton model 646 6" Bench vise is in excellent condition and does not look like it was ever used much at all. It will come with 4 mounting bolts washers and nuts. Free shipping is for the lower 48 states only. Alaska. Hawaii, and Puerto Rico please ask for a shipping quote. Please feel free to ask questions and thank you for looking.
ANTIQUE "RAISED LARGE LETTER" WILTON ANVIL TYPE SWIVEL WORKSHOP VISE
17LB(5" JAWS) ANTIQUE RAISED LETTER WILTON ILL. USA WORKSHOP VISE IN VERY NICE USED CONDITION. MOST ORIGINAL GRAY PAINT STILL PRESENT. WORKS LIKE IT SHOULD. VERY NICE VISE. 19.99 STARTING BID. SHIPPING INCLUDES INSURANCE.
Wilton Cadet 8140 Vise ~ 4" Jaws
Vintage Wilton Cadet 8140 vise. Made in Schiller Park Ill. U.S.A. Marked 170 on the keyway. The vise measures 14" long(closed) x 8" at the base. X 7" tall. It weighs 33 pounds. The jaws are 4" wide and they open up to about 5 1/ 2" The vise is in good cosmetic condition with scratches and small dings. The paint is worn. Mostly on the top. The jaws show almost no wear and the main screw is in excellent shape without any play. Buyer to pay $25.00 for Parcel Select shipping within the lower 48 states. Other places please email for a quote. Shipping cost is an estimate. We refund any overcharge. We print the shipping cost in the label for your convenience. Your Wilton vise set will be packaged with great care. And will ship within 2 business day after payment is received. The tracking number automatically will be sent ... moreto you when the item goes out. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1411f092f8d-0xfc-
Vintage Wilton Machinist Bench Vise 3.5 Jaws Pipe Clamps Anvil Swivel Base
Hello there! I have a vintage Wilton mechanics triple duty bench vise with swivel base for sale. This vise is in wonderful condition and has years and years of life left in it. It has 3" removable jaws that will open to just about 5" This vise sits on a 4 point swivel base and has pipe clamps built in. It also features a small anvil. On the female half of the vise the numbers and letters" 111099 2UX" and on the male half"111098 3UX" are printed. This vise weighs in at 17 lbs. and sits a hair over 6" tall and about 10.5" long when closed. All the mechanical parts work smoothly and their are very few dings. I would also say 95% of the original paint is still on the vise. If you have any questions please do not hesitate to ask. Thanks for looking!
vintage wilton Woodworking Vise 4880
Red Wilton woodworking vise 7" long. Works great. I touched up paint in a could places I screwed up. I also cleaned the faces of the vise. Opens up 9 inches wide. Has quick open action on it which makes it much easier to use. Posted with
WILTON USA MADE 300S BULLET MACHINIST VISE SWIVEL BASE SERRATED JAWS
This listing is for a very nice USED WILTON BULLET 300S 3" jaw width machinist vise made in the good ol" USA. Features a swivel base. VERY CRISP serrated jaws. Not an abused vise in any way,does need repainting. Weighs 27 lbs. GUARANTEED BE SURE TO CHECK OUT MY OTHER AUCTIONS AND MY NEW EBAY STORE FOR THE FINEST IN VINTAGE NAUTICAL CLOCKS AND BAROMETERS.PLUS GAUGES AND VINTAGE METEOROLOGY INSTRUMENTATION This precision pressure gauge has been calibrated on my HEISE calibration test bench. Using traceable transfer standards, with nitrogen gas. BE SURE TO READ THE"ABOUT ME" PAGE FOR PICTURES OF MY SHOP AND CALIBRATION EQUIPMENT PLEASE. DON"T WASTE MY TIME, OR YOURS, MAKING RIDICULOUS"BEST OFFERS" THAT ARE NOT APPROPRIATE. ONE THAT IS APPROPRIATE IS AT LEAST 85% OF LISTING PRICE. YOU CAN ONLY MAKE ONE"BEST ... moreOFFER" SO THE ALTERNATIVE IS THEN PAYING FULL LISTING PRICE. I WILL NOT RESPOND TO RIDICULOUS"BEST OFFERS"Check out my!Be sure to add me to your!
Vintage Wilton Bullet Vise 9300 (101014)
Description Vise is in great condition for its age. Shows signs of use and wear. But still has alot of life left. Please see item description and pictures for further details. Thank you. We appreciate all of our International Customers. Though we only ship throughout the Continental United States. We have had many shipping issues in the past shipping outside of the United States. If you are not within the Continental United States. Please do not bid on our items, at least without messaging us and seeing if we will make an exception. Estimated Shipping Weight: 26- Lbs- 0- Oz. Please review the shipping options menu. As sometimes we offer more than one available shipping method. 90% of the time. We use recycled boxes when shipping. We strive for your satisfaction. And if for any reason you are not satisfied with a transaction, please contact ... moreus either through eBay messages, or at our store phone number: 860) 445- 2274. Thank you! TeraPeak Tag: Wilton Vise. Day of Week Sun, Duration 11+ Days, Keywords Time of Day 7-8PM,
Wilton 6-1/2" Jaw Width Medium-Duty Industrial Machinists Bench Pipe Vise 1765
WE SHIP ONLY TO USA LOWER 48 STATES. NO EXCEPTIONS! Wilton 6-1/2" Jaw Width Medium-Duty Industrial Machinists Bench Pipe Vise 1765 Wilton 6-1/2" Jaw Width Medium-Duty Industrial Machinists Bench Pipe Vise 1765. All in good condition,works very good, bottom swivel base is missing, so it will be a great bargain for somebody OR USE IT AS A STATIONARY ONE. 6 1/2" jaws opens past 6 1/2" just add a base if you like and you are ready to go, looks better in person, thanks for looking. MAKE OFFER) ONLY WHATS IN THE PICS COMES WITH THIS AUCTION. THANKS FOR LOOKING. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DONT WANT TO WAIT FOR AUCTION TO END. MAKE ME A GOOD OFFER AND IF I APPROVE, I WILL PUT YOUR OFFER IN THE*BUY IT NOW* ONLY IF IT DOES NOT ALREADY HAVE A BID. I WILL NOT SELL OUTSIDE OF EBAY AND FOLLOW ALL EBAY RULES. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... moreIMMEDIATE PAYMENT MUST BE MADE ON PAY PAL. AS PAYPAL IS THE ONLY FORM OF PAYMENT NOW, THANKS. 7 DAYS A WEEK) WE SHIP ONLY TO USA LOWER 48 STATES. NO EXCEPTIONS! PLEASE WATCH MY AUCTIONS. AS I MIGHT DECIDE TO PUT A( BUY IT NOW) IF IT DOES NOT HAVE ONE ON IT ALREADY, I DO IT ALOT, THANKS. WE SHIP ONLY TO USA! WE SHIP ONLY TO USA LOWER 48 STATES. NO EXCEPTIONS! ATT: WE DO NOT SHIP OUT OF THE USA.LOWER 48 STATES ONLY, ALL ITEMS SOLD AS IS SO PLEASE ASK QUESTIONS BEFORE BIDDING) E B A Y THANKS FOR LOOKING. We sell all Items as is-where is. So Please ask all Questions before bidding. We do our best to describe the Condition in which the Items are in, So Please read the Entire Discription. If your Item is Refunable, you are Responsible for Return shipping, Insurance& amp; Handling is not refundable. SHIPPING STATED IS FOR THE LOWER 48 USA STATES. WHICH MEANS WE JUST SHIP TO LOWER 48 STATES. Powered by PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases! Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing to
WILTON 6" MACHINIST'S BENCH VISE Model No. 600
Shipping and Handling and Insurance is $ 95 ITEM WILL BE SHIPPED VIA PARCEL POST. SHIPPING WILL INCLUDE DELIVERY CONFIRMATION. PLEASE EMAIL WITH ANY QUESTIONS. PLEASE LOOK AT THE PICS FOR CONDITION!Check out my other items! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Wilton Mechanics Vise 360° Swivel FINAL PRICE DROP
For your consideration is a used wilton vise. There is a number stamped on the side of it but i cant tell what it is to tell the model number so please look at all photos to see the jaw size and opening, works fine although the threads feel tight, and the handle is bent, it has 360 deg rotation, the base is not broke like you see on alot of these, the base will be removed(but included) so it will fit in the crate I have for it, this weighs just under 45 LBS so if you want me to price other shipping other than USPS just let me know your zip and I will be happy to do that, payment due through pay-pal within 7 days of auctions end. And I try to ship next day after cleared payment,I offer a 14 day money back refund if I happen to misrepresent the item, buyer pays return shipping and I must be notified within 24 hours of delivery) NO INTERNATIONAL ... moreSHIPPING
VINTAGE WILTON No 4 BULLET VISE SWIVEL BASE MACHINIST WWII ERA TOOL USA NICE!
Please scroll to bottom of page to view all detailed pictures. For auction I have a VINTAGE WILTON No 4 BULLET VISE SWIVEL BASE MACHINIST WWII ERA TOOL USA NICE! Super well made. Heavy duty Wilton machinist vise may have been one of the first vises Wilton made? Bottom of slide is stamped 3-945 which I believe dates vise to 1940. Vise is approx. 15" long closed. And weights approx. 38 Lbs. Jaws are 4" wide and open to over 6" wide. Has swivel base. Vise reads: WILTON VISE No 4 PAT PEN USA WILTON TOOL CORP. Vise is in excellent. Clean, lightly used but not abused condition! There was some old pain which I removed and checked every inch of this vise! There is nothing broken. Damaged, or repaired! No surprises. Has very little wear! Opens and closed smoothly! Jaws meet very precisely! There are some small use marks on top(it has ... morebeen used)stated for clarity)and one small flea bite on the corner of jaw(see pic 7 below) Vise as it sits has little to no paint on it. It is very nice as it sits or you can paint it your prefered color. It has been fully cleaned and greased. Would make a nice addition to any shop! It is built like a tank! If you have any questions please email me. Winning bidder pays actual 44 lbs. USPS Parcel Select Shipping in the US which includes insurance and delivery confirmation. I will ship worldwide via Priority Mail International. Packaging material and handling are free! No added fees! Check my buyer feedback! Honest and Reliable! Speedy next day shipping! note.though I ship promply the USPS is not always so quick especially around the holidays or to west coast destinations)please be patient as you can check your tracking number for status) I try to ship as affordably as possible but super fast expedited shipping is always available if desired. I will accept Paypal or other payments options. In upcoming weeks I will be listing many unusual hard to find vintage tools. Hardware and other items never before offered for sale or seen on ebay! Stay tuned. Check back often! Combined shipp
Vintage 5 Inch Triple Duty Utility WILTON VISE Anvil Swivel Pipe Jaws USA
Vintage 5 Inch Triple Duty Utility WILTON VISE Anvil Swivel Pipe Jaws USA This 5 inch Wilton vise will be a great addition to your garage. Shop, shed, barn or business. It is in very good condition. Freshly painted& is ready to work. Features swivel base. Pipe jaws, anvil& quick release. Has holes for tool box or bench mount. Made in the USA. Item will be shipped out within 1 business day of payment clearing. Please leave positive feedback if you're happy with your purchase. It makes a big difference! If not. Contact me& I'll do my best to make it right. All international& shipments over $100 will be insured against loss or damage. Questions welcomed! Thanks for looking. 2shoobs
Vintage YORK WILTON Type Machinist Bullet Vise Swivel Base 3" Jaws
Up for auction is a rare York Wilton Bullet type vise. The vise is marked York on one side and has a patent 685893 on the other with some wording which I can not make out but some of the letter I believe are zakchem anemo but not sure(see pictures) The vise head is a approx. 3 inches wide and opens up to 3 inches. The vise does have some scrapes and some rust spots to it but is in solid working condition. It can be restored to new condition or left the way it was found. The garage gazette has some interesting comments. Where one person wrote" This bench vices started to produce in Czech republic and patent is from 1934( Mr. Dohnal) According to some people they think York was the company that actually came up with the bullet vise and that Wilton might have copied them. There are all types of speculation as to where this vise was made ... moreor came from since there is no history or information. Maybe someone out there might know something and any comment would be appreciated. This vise is being sold in as found condition to the highest bidder who would truly admire the history behind it and true craftsmanship of these bullet vises. Please read policy. All our items we sell are considered used and may have some wear or age to them unless otherwise stated. As such. There are no refunds or exchanges and item is being sold as is. We make every effort in describing the item as accurate as possible. We also provide lots of pictures for your viewing. So please take a look at pics carefully before bidding on item. Any questions please email us and we will get back to you as soon as possible. Thanks
vintage wilton 400 swivel bullet vise hardly used wow except 1'' crack
I have for auction this vintage Willton model 400 bullet vise. It is in hardly used condition. the jaws show very minimal wear. the entire vise has very little paint loss. The vise has two labels on it that would usually wear off in no time when in use. The anvil platform has only a few dents and dings. The bad issue is there is a crack about 1 1/16' long and the side of the main frame barrel. see pictures 7& 8) Thats the issue. otherwise it would be a great vintage wilton vise. Now it is still a user tool. There is no wobble in the jaws because of the crack. It is a great vise for parts. the swivel base is nice the jaws. The handle and the tightening nuts. Please see pictures for condition. buyer pays shipping and delivery confirmation usps parcel post mail. the vise weighs about 50 pounds as you see it. thanks for looking
3" Wilton Bench Top Pipe Jaw Swivel Base Vise Fully-Functioning EX. Condition
This item is a Wilton bench top table vise. In fully-functioning condition. Made in Taiwan. I cannot decipher the lettering stamped on the side. But I believe this is a 3" model although it fully extends to 4.5" Weighs almost 15 lbs. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Wilton Bench Vise 3 1/2 Swivel Base Pipe Jaws Anvil Made In USA
This used Wilton bench vise has 3 1/2" wide jaws that open to over 3 1/2" It's a good looking. Smooth working vise. The lock down swivel base has four bolt holes for secure mounting. It has a few dings and some wear to the paint from use. Free priority shipping.
Wilton 4" SWIVEL BASE Bullet Machinist Vise -Schiller Pk ILL - Made in USA! 50LB
Wilton 4" Bullet Vise Unrestored& in 100% Working condition hard-to-find SWIVEL Base These were removed from a machine shop that utilized 100% American made machinery! This is a 50LB vise! Includes everything shown in the pic tures. Ship s within 24hrs and online tracking will be provided! Return& P urchase Policy: Unless otherwise stated- items are listed as is. With no returns. Those with return policies carry a 14 Day Return. Shipping fees are NOT refundable when you wish to return an item. Unless there was an error on my behalf. If you are returning a"free shipping" item a 15% restocking fee will be removed from the refund a mount. Any items that are returned per my returns policy are subject to a 15% restocking fee at my discretion(unless it was a shipping error in my behalf) Under NO circumstances will refunds ... morebe fulfilled for items that: Do Not have a stated return policy-Are over 14 days past their delivery date-Items that I have not been contacted about before returning-Items that have been used. Or show signs of abuse, or other than"as purchased" International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1413cc3b8b1-0xf4-
Wilton vise 1765 6 1/2 jaws 6 1/2 opening Used
Wilton 1765 Tradesman Vise Show little sign of use but has some bangs on top of it. I think it was in a supervisors truck has surface rust which I didnt try to hide. It was hard to turn when I first tryed it. But a squirt of WD40 and I could spin it with one finger. I tried to show the jaws as best I could.They are sharp and appear to have little wear other than the surface rust. hopeing no one bids on this so I can keep.
Wilton Schiller USA Vise W/Anvil No.643-1/2 3-1/2" Wide Jaw Swivel Base
Nice Working Wilton 3-1/2" Jaw Vise Made In Schilling Park. Ill. USA I purchased this Wilton vise from a gunsmith's estate sale. It is in good working order. The base swivels fine and the jaws open and close fully and smoothly. The jaws open to 4" apart. This vise fits fine with some foam wrapping into a medium flat rate priority box for less expensive and faster shipping. I would be happy to combine shipping on any of my auction items. You can always come pick up direct from me if you choose as well to save the postage. Good luck on this quality USA made Wilton vise.
Wilton 2" Vise & 344 Pow R Arm
Wilton 2" Vise& 344 Pow R Arm Click to Enlarge Click to Enlarge Click to Enlarge Up for sale is a Wilton 344 Pow R Arm and 2 inch vise.The Pow R Arm is in good looking and working condition.The Wilton vise opens up to 2 1/4 inches and has 2 inch wide jaws.I'm not an expert on every item I sell so if I forgot to mention something just ask and I'll try to answer your question.You can enlarge the pictures to get a better look.I will always combine shipping(if possible) on multiple auctions won to save you money.Shipping price if quoted is to the lower 48 states only.All others ask for a quote.I can ship First Class mail to Canada but only Priority Mail to all other Foreign Countries.This cost the buyer more money but is the only way Ebay will offer Seller Protection.Payment is expected within 5 days.Thanks for looking and have ... morea great day. Payment is expected within 3 days if using paypal.Other methods may take up to 7 days to pay. Items will be shipped within 3 business days after receiving payment.I can usually ship an item anywhere in the world.Just ask for a quote. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000.
Wilton Bullet Vise Model 350 w/swivel Base Machinist Smooth Jaw
WILTON 350 3-1/2" MACHINIST BENCH VISE see all enlarged pictures nice clean vise Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1413cd64f54-0x101-
Wilton Bullet vise, 4", Machinist's machinist 101157, heavy duty
Wilton Bullet vise for sale Model 101157 Features: Biggest. Heaviest vise jaws for this 4" Wilton Bullet Most rigid mounting method- not a swiveling base Very heavy duty Screw in great shape Opens over 6" Hardened jaw inserts are smooth No welds. No repairs, no cracks Great shape. Smooth operation See this URL for information: Shipping to US only 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1413cd96ee8-0x101-
Antique Wilton 4" WE Bullet Vise Gunsmithing Machinist
DESCRIPTION: Wilton 4" Vise. Made in Chicago. Illinois. It has a model number on the side but it is hard to read. I believe it is 840 or 940 WE. CONDITION: The vise is in working order. It is rusty and has been well used. There is a small chip on the edge of one of the grips. DIMENSIONS: 4" across. 5 3/4" opening, total length when closed is about 15" ALL MY AUCTIONS ARE NO RESERVE! PLEASE VISIT MY OTHER AUCTIONS. All international sales are through a third party shipper. AFTER THE SALE: If you feel I did not describe the item properly please let me know. Returns are accepted. Please note I will always leave feedback for buyers but not until you leave me seller feedback. Thanks!
Wilton Baby Bullet Vise 7" with 2" Wide Jaws Bronze Jaw Inserts
Up for AUCTION is the following item 1- Vintage Wilton Baby Bullet Vise 6" Long with 2" Wide Jaws the Jaw Inserts are BRONZE for delicate items. In very good condition and excellent working order. Send list of item numbers you are interested in for SPECIAL FREIGHT DEALS! Thanks for you interest in this item. Powered by
WILTON C-O Heavy Duty Bench / Pipe Vise 3 1/2" Jaw 5" Open Blacksmith Machinist
Excellent WILTON C-0 Blacksmith Machinist or Mechanic Heavy Duty Swivel Bench and Pipe Vise in great. As found, perfectly working and nice looking condition This fantastic and heavy duty Wilton Bench Vise is the absolute top of the line vise that money can buy. With similar new model retailing for over $700! Wilton is also now making vises for Snap On Tools as well, making this a true value compared to paying retail or buying brand new. The condition of this great Wilton Vise is nice and it has not yet been cleaned in any way. This was found while liquidating the estate of a lifelong master mechanic who took amazing care of his tools, but he passed several years ago leaving this is need of a light cleaning. It is being sold as is and would cost nearly 3 times this much to buy retail! Save a ton and get free insured shipping in the U.S.A. ... moretoo! Please check the pictures carefully for the exact age and condition. It's nice and will clean up beautifully! Thank you for looking and Insured Shipping is Free in the U.S.A.
wilton vise 60 lbs 4-1/2 jaws
60 pounder wilton made in schiller park ill. has some# 101162 works fine looks like a battleship has a6-1/2 base we may need to work out the postage
NICE USA Made Wilton 6-1/2" Antique Swivel Bullet Vise in ORIGINAL PAINT!
Fresh out of a barn is this super nice American made Wilton 6-1/2" antique bullet vise. This vise is 100% functional and looks to me like it barely saw any use! You will notice that it has acquired some"patina" you may call it surface rust) over time. But I chose not to use any solvents or clean it, and instead leave it in as-found condition. I did not want to do anything that would damage this authentic piece of American iron. I am certain that it will clean up just fine if you choose to do so. Details: Jaw width is 3-1/2" long- jaws themselves are in amazing condition and are still sharp Jaws open to 6-1/2" jaws open and close smoothly Swivel base is 4" wide- base swivels and locks into place as it should- bottom of base in amazing condition(as seen in photo) Handle appears to be straight and unmolested Paint ... moreis original and unmolested Weighs approximately 41 lbs. Overall length when closed approximately 14-1/2" Pictures say a thousand words. So please look at them carefully and feel free to contact me with any questions that you may have. Thanks for looking! Note: Shipping via FedEx Ground. Item is super heavy. But I think that I would be able to carefully disassemble the vise and mail it it in 2 USPS flat rate boxes. It would be cheaper to ship like this. So if you're the winning bidder and would like to save on shipping, I could accommodate that. Posted with 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1415364f8d5-0xff-
Vintage Wilton Cadet 9140 Swivel Bullet Bench Vise 4" Jaws 1956 machinist
Antique Wilton Cadet model 9140 bullet vise. The manufacture date on the drift key is 11-30-56. The vise jaws are 4" wide and open to approximately 5 1/2" The vise is in good operational condition. But at one time someone must have beat on something so hard that it broke off part of the base under the jaw on the fixed side and roughed up the top behind the jaw(see photos) When I got it the fixed jaw was missing. I made a replacement jaw out of mild steel and it works fine. I had to re-tap the screw threads so the screws are different sizes on the 2 jaws. The missing part of the jaw base does not affect clamping strength. It would only be a factor if you wanted to clamp a part in it and beat it with a sledge hammer. The screw is in good shape and turns very smoothly. This would be great candidate for restoration or it will function ... moregreat for years to come just as it is. The fixed jaw base could be built back up with weld or simply left alone. Overall a very good vise and would be beautiful restored. Note: Shipping is to lower 48 states only. The base plate and screw may be dissasembled so that it will fit into a flat rate box.
WILTON 930 TABLE BULLET VISE 3" JAW / 5" OPENING, SWIVEL BASE, USA - NICE!
Nice Wilton Model 930 Bench Bullet Vise with a Swivel Base. Vise has 3" Jaws and a 5" opening. Base swivels smoothly. Tightens and loosens with the use of a 9/16" wrench. Cleaned, freshly primered, painted and lubed, works great.
Wilton C3 vise Restored. FREE SHIPPING TO THE LOWER 48 STATES!!!!!
FREE SHIPPING ON THIS ITEM WITHIN THE LOWER 48 STATES! Up for sale is a very nice Wilton bullet vise. It is a Model C3. It weighs about 225# It has been completely disassembled and stripped(not blasted) From the colors of paint that I removed. You can tell it has served it's time in our military, most likely since 1975, as this is the date on the bottom of the jaw tube. When it retired I do not know, but it has seen very little use in it's lifetime. No cracks or damage to the castings. The jaws are the original jaws. The pipe jaws have been replaced only because one was missing in action. I ordered and installed new ones. The vise itself has very little if any marks that indicate it has seen the business end of a hammer. There was very little rust on the vise, as you can see in the pics, it cleaned up very well. The swivel base was ... morereplaced with a new Wilton piece. One of the mounting lugs was broken off. It was primed and painted with Verde Green Hammer paint. It is a very close match to the original color that I saw as I was stripping it. This vise is as close to new as you will get without spending $1.800.00- $2,000.00. Buy with confidence. View my feedback ratings. Shipping must be arranged with seller before purchasing. I will crate it and prepare for shipping. Or it can be picked up in Chesapeake, VA 23322.
Wilton Tilt Power Arm Pow-R-Arm Veep 344 w/ Adjustable Head Vise Positioner USA
This is for a Wilton Pow-R-Arm Jr. multi positional base plus vise. Has rust. Works perfectly. Base and handle unscrews smoothly. The numbers on the bottom of base are#4 and 201076-10. Manufactured in the USA. I love to answer question. Email zip code and items of interest for combined shipping cost. Even though shipping is free it is a cost and I will pass the savings on to you. My goal is 5 star feedback from you. Please. Always let me know how I can better serve you. Thank you for helping support my home. Returns: 20% restocking fee unless item is not as described. The restocking fee helps defray the shipping costs. Thank you for your business.
Vintage Wilton W-9-63 Bench Mounted WoodWorking wood Vise
Vintage Wilton woodworking vise Model w-9-63 7" jaws Please look closely at photos and ask questions before bidding Thank you
27lb.Wilton Machinist Bench Vise,Swivel Base,Pipe Clamps,Anvil,4-1/2" Jaws
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! 27lb.Wilton Machinist Bench Vise.Swivel Base,Pipe Clamps,Anvil,4-1/2" Jaws, Click to View Image Album 27 pound Wilton machinist bench vise.Swivel base.Pipe jaws.Anvil.4-1/2" jaws.Marked 654 4"No damage or repairs.No reserve.Email with any questions and thanks for looking! Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: USPS Parcel Post® UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE ... morecounters from Vendio today!
NICE!! WILTON 6" HEAVY DUTY SWIVEL PIPE / BENCH VISE - #1760
aims NICE! WILTON 6" HEAVY DUTY SWIVEL PIPE/ BENCH VISE- 1760 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Wilton. This is a Heavy Duty Swivel Pipe and Bench Vise in Good condition. Unit is missing one of the pipe vise jaws. See pictures for detail. Model# 1760 Great for general purpose. Service or maintenance work. Holds pipes, fittings, machined parts, fabrications and components. Specifications: Jaw Length: 6" Jaw Height: 1" Jaw Opening: 6-1/2" Throat Depth: 4-1/4" Overall Dimensions: 20" x 8" x 9-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this ... morecategory by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! WILTON 6" HEAVY DUTY SWIVEL PIPE/ BENCH VISE- 1760 NICE! WILTON 6" HEAVY DUTY SWIVEL PIPE/ BENCH VISE- 1760 NICE! WILTON 6" HEAVY DUTY SWIVEL PIPE/ BENCH VISE- 1760 Reliable Tool Inc. c 2011 | Powered by
Vintage Wilton Bench Mount 3-1/2" Width 5" Opening Vise Grip
This auction is for a Vintage Wilton Bench Mount 3-1/2" Width 5" Opening Vise Grip. Vintage used condition. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business day after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If the error is our fault we will gladly cover all costs, original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best ... moreto describe items as accurately as possible. Please feel free to contact us with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141801bb4fc-0xfe-
Wilton 1645 Mechanics Bench Vise with Swivel Base, Excellent Condition!!!
Up for sale is an extremely clean Wilton 1645 Mechanics vise that has been cleaned up to better then new and ready to use. The vise was in sad shape when found. chipped paint, rust, missing decal and lockdowns) but it has all been fixed to look like new. The vise has been pulled apart and cleaned, painted and all metal parts were polished. The anvil area was lightly resurfaced and everything was lubed. It will easily operate with one finger now. The swivel base lockdowns were missing so i made a new set from an original i had laying around. They aren't perfect but look pretty close to an original. I found another used factory decal and reapplied it to the vise. The rubber"finger-savers" are original to the vise. This 1645 is an earlier model that was overbuilt and just about as stout as a bullet style Wilton. It has a much heavier ... moreduty swivel base that can be swapped out to fit a bullet vise. The newer mechanic vise bases are more square and won't fit physically/cosmetically. The slide is a single casting and not an inserted piece of steel channel held in a casting jig. The jaw inserts are 1/2" thick and have all of its teeth remaining. They show little to no wear. The steel pipe inserts are present and in excellent shape. The vise has 5" wide jaws with a throat depth of 3 3/4" Its max opening is 6 1/2" It weighs approx 38lbs.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14188a46639-0x103-
Wilton Mechanics Vise 6" Jaw Width 360° Swivel Damaged*
Wilton Mechanics Vise 6" Jaw Width 360° Swivel Damaged* Left Side: Right Side, Manufacturer: Wilton Model: Unknown Description: Mechanics Vise 6" Jaw Width Condition: Damaged. One Of The Legs Used To Fasten The Vice To A Bench Is Broken Off(See Pictures) Packaging Condition Details: Not in Original Manufacturer Packaging Hand Measured Height: 9.75" Width: 12" Length: 15" Weight: 61.85 Jaw Width: 6" Type of Base: 360° Swivel Type of Nut: Straight line pull*This item is not eligible for combined shipping. Includes: 1 Wilton Mechanics Vise Packaging Condition: Not in Original Manufacturer Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. ... moreTo make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional i
WILTON VISE 450S WITH COPPER LINERS 4 1/2" JAWS, EXCELLENT!!
Made 8-78 this 35 year old vise was lightly used. As you can tell from the photos this big Wilton is something special. This vise was stripped. Cleaned and lubed. Its in such nice shape I left it unpainted. Operation is tight, quick, and firm. All 3 handles are excellent as are its original jaws. I've added OE Wilton copper liners also. This vise shows well with light normal wear. Guys, the Schiller Park Wilton bullet, they never made them better. Any questions, please contact me. Shipping will be Fed Ex in 2 boxes. Thanks for looking. SPECS: LENGTH. 19" HEIGHT, 9 3/4" THROAT, 4" OPENS, 7.50" JAWS, 4.50W X 1.250H, WEIGHT 72 LBS.
Wilton Cadet Vise Schilling Park Illinois 5135 Swivel Vise Funky Green Paint
Here is a great little Wilton bench vise. Bottom is marked 13135. While the jaws are marked 5135. One of the jaws needs to be tightened up.
WILTON 4" Bullet Bench Vise - Chicago, USA Vintage
Listing for Wilton Chicago USA Vise. Heavy well made vise. On the side it says HD. I cant find any numbers on it other than the bottom. Its a 4in vise. It does have paint peeling I assume is original paint, don't know what year it is has grease on it has been used. Still works you can move in and out like the vise should. If you feel I don't deserve 5* let me know all make good thanks Ship insured with tracking thanks.
Wilton Tool Corp Bench Vise Swivel Base
Description This is a Wilton Tool Corp Bench Vise. It is used and shows wear but still works as intended and has a lot of good use left. It does not come with the original handle. It has a swivel base and a pipe jaw. Jaw Width 3 1/2" Jaw Opening 3" Most of our items listed come from local sales. We try to disclose all we know about the item but since we are not the original owner or may not know what the items use is. We may miss some information about it. Please email us if you have any questions and we will do our best to answer your questions. We ONLY SHIP TO ADDRESSES IN THE UNITED STATES. We DO NOT offer local pick up or personal delivery. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1418ad506cd-0xf9-
Wilton Vise 4 1/2" Jaw 1745
4 1/2" Jaw Model: 1745 In good working condition US Shipping ONLY. No International Shipping We ship to address provided in the order details. Please make sure it is correct If you have any questions please send a message Thank you
Wilton 5" Rotating Jaw Utility Vise
Nice vise- head and base swivel- pipe vise- seems like its never been used- still has cosmoline. Posted with
Wilton TLT/SP-150 Jaw Width 6'' Tilting & Rotating Vise
Wilton TLT/SP-150 Jaw Width 6' Tilting& Rotating Vise Excellent Condition· Perfect vise for 3-axis jobs in milling. Drilling, grinding, shaping and jig boring· Vise bodies are constructed of close grained. High tensile, seasoned alloy castings· Ergonomically designed all steel handles with spring loaded ball attachment· Durable polychromatic finish· Jaw plates hardened and ground· Hardness of jaws 55 ± 3 HRC· Accurately indexed for 3 way angular work· 45° tilting range on either side and 90° vertical indexing· Jaw Depth: 1¾" Jaw Material/Hardness(MW) 55 ± 3 HRC· Jaw Width: 6" Opening Capacity Max: 6" Type of Base: 360 ° Swivel 50-C
Scout bench vise by Wilton 3 1/2" Jaws, Swivel base, pipe jaws USA Made
Scout bench vise with 3 1/2" jaws. Features swivel base& built in pipe jaws. These old scout vises were manufactured by Wilton. Opening is 2 1/2" wide. Vise is in excellent used condition. Please see pics& feel free to ask any questions.
VINTAGE WILTON 4 1/2"JAWS MACHINIST BULLET VISE #9450 SCHILLER PK ILL #101033
| | VINTAGE WILTON 4 1/2"JAWS MACHINIST BULLET VISE#9450 SCHILLER PK ILL#101033, Click to View Image Album 52lb vintage machinist's vise mkd"Wilton 101033 9450 Schiller Park Ill.USA" Vise is 18 1/2"L when closed + opens to 8" between the 4 1/2"W jaws. It sits 7 1/2"H on a 7" diameter base. Also the keyway is mkd 1 73, that might help date it. In Fine user condition with no chips or cracks, has crisp tight jaws + lots of it's original paint finish. Just has some dings, scratches + some denting on the bearing cup + some wear to the recessed anvil's edges. Great High Quality Vintage Bench Vise. finish Please check out my other great Vintage Auctions. SCROLL DOWN FOR MORE PHOTOS Payment, I accept the following forms of payment: PayPal Shipping& Handling, Enter ZIP Code and click button to ... moresee prices: USPS Parcel Post® USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Terms: U.S. Buyers pay Insured USPS shipping cost with no handling fee added. Shipping standard is USPS Priority Mail with Delivery Confirmation + will give you the Parcel Post or First Class option if savings are substantial. Please wait for an email from Planetacorn + I will provide the best shipping option. Multiple items will be combined to save on shipping. International Buyers pay insured USPS shipping cost. Either Priority Mail for package or Express Flat Rate for large envelope with no handling fee. Custom import taxes + duty fees are the buyers responsibility. Please check with your country's customs office before bidding. The final end of auction price will be declared on all customs forms with no exceptions. Your Participation is very important to Acorn-net. Please Bid with the confidence that any problems arising from a completed transaction will be dealt with professionally +
Wilton No, 6 Heavy Duty C Clamp Steel Plate Fabrication Vise Industrial
Nice working Wilton No. 6 C Clamp for metal/ steel fabrication. Opens to 6 inches. Has rough spot in casting as seen in photo. But does not take away strength. About 13 inches long and 8 in wide. Its a brute.
Stanley Vidmar 12-Drawer Tool Storage Cabinet w/Wilton 4" Vise Shop Equipment
SKU: 2430952 A: 0013000000CXCfg O: 0065000000OW8b7 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Stanley Vidmar 12-Drawer Tool Storage Cabinet w/Wilton 4" Vise Shop Equipment Box Portable. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Stanley Vidmar Type: Portable Tool Storage Cabinet Features/Specifications: ... moreNo. of Drawers: 12 Drawer Height Range: 3" 7" Working Height: 40" Four swivel casters Two wheel brakes Push handle Includes 4" Wilton vise(table mounted) Dimensions& Weight: L 70" x W 29" x H 47" Shipping Weight: 805 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Keys not included Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Wei
EXCELLENT 1949 WILTON USA Swivel Base BULLET Bench VISE Machinists 3-1/2" Jaws
This Sale is for ONE EXCELLENT Used Made in USA( I was told the vise was made in 1949 based on the serial number on the vise but i cannot confirm this) WILTON BULLET VISE Machinists Vise with Swivel Base. Frame numbers 935 on body and 935 on movable jaw. The previous owner appears to have repainted the vise. Please see photographs for more detail. A ruler or scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their ... moregovernment when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or
WILTON Bench Shop Vise 4 1/2" Jaws
WILTON Bench Shop Vise 4 1/2" Jaws Good condition in my opinion. However. As you can see, it has peeling paint and some light surface rust. I wire brushed and WD-40'd it for a light cleanup. You can go further if you decide to make it look a little nicer. Operationally, it works as designed. Nice and easy open and closing and pivoting. Has pipe clamp built in as well. This is a small vise with big 4 1/2" wide jaws. The can in pic is to show relative size only. Multiple Shipping options available. I DO NOT SHIP ON WEEKENDS Normal 0 false false false MicrosoftInternetExplorer4 SOLD AS IS AND AS SHOWN. WELL ESTABLISHED. HONEST AND PROMPT PAYING EBAYERS ONLY, PLEASE. NOTE: PAYMENT IS REQUIRED NO LATER THAN THE 2nd DAY AFTER THE AUCTION END DATE UNLESS A PRIOR AGREEMENT BETWEEN ME AND THE BUYER HAS BEEN ESTABLISHED. OTHERWISE. IF ... morePAYMENT IS NOT RECEIVED WITHIN THE ABOVE TIME FRAME THEN A NON-PAYMENT DISPUTE WILL BE INITIATED. Please read any Q& A's which may appear at the bottom of this auction. Check back often for possible updates. Not sure if you will be near a computer when the auction ends to place a last minute bid? Place a proxy bid! Learn about proxy bidding at this Ebay help link: http:pages.ebay.com/help/buy/proxy-bidding.html Ask Questions! If there is anything I have not covered here or you are not sure of something and need verification of certain aspects of the offering. Then it is your responsibility to ask and I will answer all questions the best I can. TERMS OF AUCTION PLEASE READ Sold"as is" This includes any issues unknown by the seller that the item MAY.But not likely have, upon ultimate further inspection and evaluation by the buyer) No warranties. Implied or written. No guarantees. Implied or written. No Returns All sales are FINAL. Buyer pays for freight. Handling and any associated charges. Not responsible for packages lost. Damaged, stolen or delayed in transit. I reserve the right to cancel bids or end auctions without prior notification as per my discretion. P
wilton 10" vise. Quick open/close. Inspected. Cleaned, painted, oiled.
They look gray. But the color is olive green. There is a cover that goes over the threaded locking mechanism on the underside of the unit that may be missing. That piece may have never been on that particular vise-I don't know. I do know that it does not affect the operation. The price assumes the unit is missing that piece. Last 2 pictures: with cover/ without cover. I can get one or two into the same size box. So if you want two I can combine the shipping and hopefully save you some money. Same box/ twice the weight. THAT MEANS COMBINED SHIPPING ON TWO. If you want more, let me know. If you are considering an 8" or a 10" The 10 seems much stronger. I have an 8" in my shop and it broke at the handle/ threaded rod. Many of the 8" were broken in a H.S. class I taught. I have the regular 10 inch vises too. None of them ... morehave the nut cover. And I doubt they ever did. Also cleaned and painted and 25 less. It appears that the regular vise can be made into a quick one by changing out the nut. Part appears available elsewhere. On Oct-07-13 at 10:26:35 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141b4816b2b-0xfe-
5 x 7/8 x 1/2 Serrated Wilton Vise Jaws: From a Wilton 110850
5 x 7/8 x 1/2 Serrated Wilton Vise Jaws: From a Wilton 110850. May fit others. Still in good shape. A lot of life left in them.
█►VINTAGE WILTON 3" JAW SWIVEL BASE BULLET MACHINIST BENCH VISE USA MADE N/R◄█
Vintage WILTON Machinist Vise- 3" jaws(opens to 5" Original paint. USA made goodness, just needs a new home. So you need a vise? Read on! Lots more pics below. No Reserve Price. WYSWYG- What You See Is What You Get. So you need a vise? These days. A vise is something that MUST be bought second hand. THERE ARE NO MORE"GOOD" VISES BEING MADE TODAY. Thats a pretty general statement. But it's also the reality of our sad Walmart priced/disposable society. Except for a scant few like Yost, the vises being manufacturer today are 99% Chinese made. Pot metal junk) Even the once mighty Wilton has ruined their reputation with Chinese sourced pot metal vises sold at Lowes. Its NOT a Wilton- at least not the ones you remember. I have pics of"new" Wiltons broken in half after a few uses. Even their pro line is nowhere ... moreclose to ones made in the 70's back. A quick google search will uncover DOZENS of"new" Wilton bullet vises with mounting feet broken off. The quality of the metal isn't there any more. As a mechanic my world revolves around impact wrenches and bench vises- This is a beautiful little vise. Jaws are 3" opens to 5" and it has both a swivel base and anvil back. It was found in a workshop that had been closed since the late 70's. It looks like it never saw much use. Add a new coat of paint or put it to work as is. I haven't cleaned or painted the vise- sweat equity" keeps the prices low. The jaws are nice and tight and in excellent shape. Almost perfect faces on each with no serious scars or damage. This would be a great vise for the bench downstairs or out in the garage. HUGE vises are great too. But NOT FOR EVERY JOB. Large vises 5" jaws and larger are actually cumbersome to use on small items. NOTE.Im pretty leniant with grading on used vises. Folks. When you buy a used vise you should expect to see hammer marks, hacks saw cuts, scuffs, scars, and general filth from the garage. When they turn up like this, its unusual. Bonus points for
WILTON VISE TRADESMAN 1745, 4 1/2" JAWS, PIPE JAWS, CLEAN!!
WILTON VISE TRADESMAN 1745. 4 1/2" JAWS, PIPE JAWS, CLEAN! This 2003 Tradesman is original and in very good condition. Everything is original to this vise. It shows some discoloration but few wear marks. One being a small chip off one corner of one jaw. Operation is smooth, the top jaws as well as the pipe jaws and anvil show little or no wear. Guys, at a low starting bid, this would make an excellent home addition to your bench. Any questions, please ask me. Thanks for looking. SPECS: LENGTH. 14" HEIGHT, 8" THROAT, 3 3/4" OPENS, 4" JAWS, 4 1/2"H X 3/4H, WEIGHT 40 LBS.
WILTON VISE 1750, 5" NEW JAWS, VINTAGE, CLEAN!
Wilton introduced the Tradesman series in the early 70's. This is one such model. This early model as you can see from one of the photos had a hallow base and it has tin pipe jaws. A number of pieces are not original to this vise. The base. Jaws, lock downs underneath with carriage bolts, swivel handles, side stickers, and spindle handle and finger savers are not original to this vise. There is no dust cap in back and looks like Wilton's Cadet from years previous, The base of the vise itself shows weld marks however its sitting on top of a modern swivel base able to rotate 360. The long 3/8" HD replacement swivel handles will lock this vise down tight. Guys, this was a basket case but the body and Dynamic, front) jaw was in such nice shape I decided to give it a second life. As you can see, the anvil shows normal wear and the ... morefront handle is not near perfect. The flip side, it has new hardened smooth jaws which align up OK, handle response is good, operation is smooth, and it will lock down at any degree you want. This could be your 1st home use bullet. Guys, take advantage of the low asking bid and keep this one on your watch list. Thanks for looking. NOTE! THIS VISE IS VINTAGE AND WILL REQUIRE LIGHT TO VERY MEDIUM DUTY USAGE. SPECS: LENGTH. 15" HEIGHT, 9" THROAT, 3 3/4" OPENS, 4" JAWS, 5"W X 3/4"H, WEIGHT, 43 LBS.
Antique - WILTON Baby Bullet Vise 2" w/ Power Arm Jr. Watchmaker Gunsmith USA
This is a classic 2” wide jaws Wilton Baby Bullet with the Wilton Powrarm Junior. Both have been stripped down to bare metal. Primed, painted, and carefully reassembled. The vise is labeled Chicago, and the powrarm is labeled Schiller Park, IL The jaws are smooth and in great shape. Everything works as it should. The handle is not perfectly straight but it is close. This is a wonderful vintage vise that has been refreshed and is waiting to go back to work. Payment via PayPal US buyers only. Payment expected within 24 hours after end of auction. Item sold as-is. I have tried to photograph as much as I can and describe in as much detail as possible. If you are unsure about something. Please contact me through eBay. I'm happy to answer any questions. Please see my 100% positive feedback and deal in confidence. Vise will ship out USPS Priority ... moreMail next business day after payment is received. Thanks for looking! Posted with
Wilton Vise 9300 Swivels
Wilton 9300 Vise. Swivels-jaws are 3" wide, jaws open to 5" Very little sign of wear or use. Vise is in good working order.
Vintage Wilton 825 Machinist Bullet Vise Swivel Base #101009 2.5" Jaws Rare
Vintage Wilton 825 Machinist Bullet Vise Swivel Base#101009 2.5" Jaws Rare
Wilton Shop King Vise with Hardy NO RESERVE
Here is a vintage Wilton Shop King vise with pipe jaws and the frequently missing hardy. It opens and closes smoothly. It will weigh 14 ½ pounds packed to ship and will ship in a medium flat rate priority mail box. Please email any questions. This is a NO RESERVE auction.
WILTON 4 1/2" MACHINIST BENCH VISE NICE MADE IN USA
WILTON 4 1/2" MACHINIST BENCH VISE NICE MADE IN USA WILTON 4 1/2" MACHINIST BENCH VISE MADE IN USA YOU ARTE BIDDING ON USED WILTON 4 1/2" MACHINIST BENCH VISE MADE IN USA IN GOOD WORKING CONDITION PLEASE SEE PICTURES All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight quote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services of a lift gate are ... morerequired. The buyer has 7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store.
WILTON PIPE AND BENCH VISE 4 1/2" JAW WIDTH NICE
WILTON PIPE AND BENCH VISE 4 1/2" JAW WIDTH NICE WILTON PIPE AND BENCH VISE 4 1/2" JAW WIDTH YOU ARTE BIDDING ON USED WILTON PIPE AND BENCH VISE 4 1/2" JAW WIDTH VISE IN GOOD WORKING CONDITION PLEASE SEE PICTURES THIS VISE IS MADE IN USA All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight quote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services ... moreof a lift gate are required. The buyer has 7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store.
Wilton Tilt Machine Vise TLT/SP-100
Used Wilton tilt machine vise. Scuffs. Scratches, etc from use but otherwise fully functional. No returns. Will ship only continental US. Ask any questions before bidding to avoid confusion.
Wilton Heavy Duty 4" Serrated Jaws Bullet Bench Vise - Machinist 44 lb
Wilton Heavy Duty 4" Removable Serrated Jaws Bullet Bench Vise- Machinist 44 lbs. Made in U.S.A. Vise has seen Very light use-1-1980 Dynamic jaw is stamped 101158-Static jaw is stamped 101157 New Paint Has some chips on the base around the edge Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
Vintage Restored Wilton Shop King Anvil Swivel Vise !!L@@K!! Nice!!!
Here we have a Very Nice Wilton Shop King Anvil Swivel Vise. It has been restored. Cleaned and painted. It is like new and works perfect. This is a Very Nice Clean Working Vise.See Pictures.You are Bidding on Exactly what is in the picture.Thanks WE ACCEPT PAYPAL ONLY! PAYMENT IS EXPECTED WITHIN 3 DAYS OF AUCTION ENDING! SHIPPING TO U.S ONLY. I ALSO COMBINE SHIPPING! CHECKOUT MY OTHER AUCTIONS!
Wilton PowrArm Junior Adjustable vise stand Power Arm 343-3
You are bidding on a Wilton PowrArm Junior adjustable vise stand. The unit is in excellent condition with just some minor surface scuffing. It works fine. The top is tapped 14-20 and they are about 2 ¼ inches apart. Bottom is marked 343-3. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141cacea02e-0x103-
WILTON 9300 BULLET VISE**3"JAWS**SWIVEL BASE**USA
CLEAN AND WORKS PERFECT. WEIGHS 25lbs. LET ME KNOW IF YOU NEED MORE INFO.
Vintage Wilton Bullet Vise, 8",Machinist's Swivel Base 60176/101157,Heavy Duty
You are Bidding on a Vintage Wilton Bullet Vise. 4" Machinist's machinist 60176/101157, Very Heavy Duty, Very Heavy, Very Good Condition, Minor Surface Rust, Fully Operational, Swivel Base, VERY NICE VISE, Thanks for Looking, Check out my! FREE U.S.A. SHIPPING ONLY
Wilton No, 101028 4" Serrated Jaws Bullet Bench Vise - Machinist
Up for bid is this used but in nice condition a WILTON 101028 bullet vise. This vise is made by the WILTON SCHILLER PK ILL. U.S.A. This vise is No.101028 and has a 4" Heavy Duty Serrated Jaws which are in excellent condition. This vise has some paint spots and some loss of original paint but could be repainted if you choose to. The vise has 2- 1/2" holes for mounting to your work bench and it can be yours for our buy it now price or we will entertain reasonable offers. TY
Vintage 835 Wilton 3 1/2" Bullet Vise Blacksmith Mechanic Machinist LOOK!!! #3
Fresh from a local School sale. The Industrial Arts shop class there was shut down. So here is a Vintage 835 Wilton 3 1/2" bullet vise, this is vise#3. Great bench vise for the mechanic or machinist ect. The handle is straight with hammer marks. The Jaws were replaced by students before the last class ended. Jaws are 3 1/2" wide. Opens to 5 1/2" before it come apart, Jaws height from bench top is 5 3/4" lenght is almost 15" long closed. This is a little dirty and dusty. Still has original paint on it but, and some paint is missing, I will let the new owner clean it I didnt want to take off any paint. Ready to be restored or put back in use. Excellent vise for the work shop bench. Please Contact with any Questions or need for more pictures! I SHIP AND SELL IN THE LOWER 48 STATES ONLY I TRY TO DESCRIBE ALL ITEMS TO ... moreTHE BEST OF MY KNOWLEGDE. PLEASE ASK QUESTIONS EARLY. PAYMENT IS BY PAYPAL ALL ITEMS ARE AS IS NO RETURNS. PAYMNET TO BE RECEIVED WITH IN 3 DAYS OF AUCTION END. PLEASE CHECK OUT OUR OTHER AUCTION.
Wilton C2 5" Combination Pipe Bench Vise Blacksmith Machinist Industrial MadeUSA
Nice 86 lb Wilton C2 5 inch combination vise. Made in USA. Looks like it has not been used much. It is well lubricated and works smootly. Jaws are in great shape.
WILTON CADET 9140 Swivel Bullet Bench Vise 4" Jaws Schiller Park, ILL 1960
Wilton vise lightly used. Some rusting but was brushed and auto primer painted. Ready to go to work mounted on your bench. Shipping to lower 48 states ONLY. See our other Auctions for more great STUFF. Payment must be made within 3 days of Auctions ending unless arrangements have been made with us. Posted with
Wilton Vise 3 1/2 inch jaws
Wilton vise. 3 1/2 inch jaws. Good working condition. Shipping only for USA lower 48 states. Good luck bidding! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-141dfde11f8-0x105-
WILTON BULLET VISE #820 W/ POWERARM BASE
I am offering for your consideration a Wilton# 820 bullet vise with a Powerarm Junior base in excellent condition. The jaws are 2 inches wide. The vise has no problems. It opens and closes well. The jaws are in good condition as well as the Acme thread screw is in excellent shape also. The Powerarm base is also in excellent condition, it locks up just great. It has a date code of 1-52 on the keyway. This vise has been used but is in very nice condition as it was never misused. WE never charge for careful packing or shipping materials. Please see all Photos. We do not add buy it now or end our auctions early. Outside the US we will only ship Express mail we cannot track packages any other way. We have lost out on too many items to continue shipping first class or priority, please consider this in the cost of any international purchase. I do ... morenot ship to South America. Shipping in the lower 48 Continental US will be $12.35 medium flat rate priority with delivery confirmation plus insurance if wanted; International shipping will be calculated according to the shipping address and the feedback rating of the buyer. Pay pal or not payment must clear before item is sent. Thanks Connie& Dave
Antique 1952 Wilton Vise Chicago 9450 WE 4 1/2" Jaws 8 1/2 Opening 60-pounds
Auction by Plum Trading Post. Inc. Please read the entire description carefully. Description: Offered for auction is: Wilton Vise 9450 WE 60-pounds Dynamic clamp stamped 4-52 Markings- See images Measurements- See images Condition- As described above. Please evaluate the images carefully and judge the condition for yourself and bid accordingly. All items are sold as is as found Shipping- Domestic shipping via FedEx Ground(Continental 48 only) or USPS. Please Note: Refer to shipping tab for primary service offered on this auction. I have shipped many items and have a high success rate. Have confidence that I will deliver this to you safely and in good condition. Shipping to Alaska. Hawaii, P.R. and international destinations via USPS Priority or Parcel Post and may cost more(these destinations do not qualify for free shipping, if offered) ... moreSignature required for auction sales above $250. All items will be insured. Legal- Plum Trading Post is not liable for any injury. Damage or loss incurred in connection with this sale. Purchaser assumes responsibility for item(s) upon transfer of the item(s) to the shipper. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141dfde122c-0x107-
Vintage WILTON 9300 N Swivel Bullet Bench Vise 3" Jaws - Machinist
Excellent condition. Swivels smooth, very tight. No cracks. Vintage Posted with
Vintage Wilton Woodworkers Vise with Rapid Action USA MADE!
Vintage Wilton woodworking vise Chicago era opens to approx 9" and approx 7" wide. Has the rapid action/ quick release feature. In excellent condition for its age. There is some surface rust but should clean off very easily. Made in the U.S.A. Thank you for visiting. If you have a moment please check out my other great vintage tools!
Wilton Cadet 4" Bench Vise w/Swivel Base 5" Opening USA
Check out our eBay store BULLSEYE INDUSTRIAL SALES Wilton Cadet 4" Bench Vise w/Swivel Base 5" Opening USA SPECIFICATIONS Bullseye Catalog# 37638 Brand: Wilton, Model: Cadet, 4" jaw width. 3/4" jaw height, 5-1/2" max opening, 45 degree swivel, 15" Overall length, Weight: 34 lb 0 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All ... moreitems listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multi
WILTON VISE 9400 VINTAGE 4 INCH BULLET VISE ANVIL MACHINIST BLACKSMITH CHICAGO
VINTAGE WILTON 9400 4 INCH VISE MARKED CHICAGO WHICH DATES IT PRE 1955 APPEARS TO BE IN GOOD SHAPE WITH NO CRACKS OR WELDS
Wilton C1 Bench Vise 4-1/2" Wide
Nice HEAVY wilton vise made in usa 4-1/2 wide jaws website says it opens to receive 6" pipe in the pipe jaws i dont have a piece to check with but i would assume that it does It has been nicely painted black by previous owner Sorry for shipping cost but its about 80 lbs I will also allow local pickup for free zipcode 46072 Posted with
WILTON VISE, BIG C2 COMBO, 5" PIPE JAWS, CLEAN!!
This C2 came in excellent mechanical condition. It was used on a welding table and came in with welding splatter up on the jaw towers. I addressed the towers and there still remains some pit marks and weld specs around the casting. This 1994 model was cleaned. Stripped and lubed and, as you can see, its turned out nice. The swivel handles, and spindle handle and the holding collar shows less then average wear. The pipe jaws show some light wear however there are new serrated jaws on top. Guys operation this smooth and tight on this big guy. Swiveling 360 is not a problem. Handle response is excellent. Guys, this bigger Wilton will definitely fit the needs of those that are looking for a bigger upgrade on your bench. SPECS. LENGTH, 21" HEIGHT, 11.5" THROAT, 5 5/16' OPENS, 7.5" JAWS, 5"W X 1"H, WEIGHT, 107 LBS
Wilton 4 inch # 404-4 Copper Vise Jaw Covers - Made in USA
1 PAIR OF GENUINE WILTON COPPER JAWS. MODEL#404-4 USE WITH ANY 4" BENCH VISE•Designed To Avoid Marring The Surface Of Material 4" Wilton Copper Vise Jaw Caps are constructed from 100% solid copper to protect your work pieces from being damaged in a bench vise. Jaw caps have smooth faces and pliable copper extensions for a sure-grip fit. Cap Faces measure 4 1/4" wide x 1 3/8" high. Price above is per set of jaw caps. Powered by The free listing tool. List your items fast and easy and manage your active items.
VINTAGE WILTON VISE 4" JAWS OPENS 5.5" MACHINIST SWIVEL ANVIL TOP USA 30 lb
NEW SIMILAR VISE FROM GRAINGER IS VER MUCH $ PLUS S.H BUT MY GUESS IS THEY ARE NOT AS GOOD AS THIS GREAT OLD VISE. THIS VISE HAS NOT SEEN ANY HEAVY USE AND CRANKS SMOOTH AND SURE. ORIGINAL PAINT. IT WEIGHS 29.85 LBS PLUS PACKAGING OPENS 5.5" AND HAS A 4" JAW WIDTH Made in USA. WILL SHIP BY UPS. NO P.O. BOXES PLEASE CONTACT ME FOR QUESTIONS or to ask about shipping discount 727-858-1721
Vintage Wilton bullet vise PICK UP only NO shipping
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE PICK UP only! I will not ship this item PAYMENT to be made at the time of pick up. NO exceptions Vintage Wilton bullet vise 4" wide jaws Not clean but in good condition Check all pictures S old AS IS. All sales final! Pick up must be made within 7 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding! 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-14209d20885-0xf9-
WILTON BENCH VISE 3 1/2" JAWS SWIVEL BASE PIPE MACHINIST
ONE WILTON BENCH VISE 3 1/2" JAWS.3" JAW OPENING.SWIVEL BASE.PIPE MACHINIST. WEIGHT 9-1/2 POUNDS.LENGTH CLOSED 8 INCHES.HEIGHT 6"JAW WIDTH 3-1/2 INCHES.JAW OPENING WIDTH 3 INCHES. Reconditioned.ready to work.Nice! THANKS FOR VISITING MY-PARTS-STORE-PLUS AND HAVE A BLESSED DAY! DISCLAIMER: BUYER ACCEPTS ALL RESPONSIBILITY IN THE UTILIZATION OF ALL ITEMS SOLD IN THIS STORE. Shipping& Handling We ship mostly USPS and sometimes UPS or FedEx on heavier items. We make every effort to ship in one business day after receiving cleared payment. We always allow local pick up for any item. We ship to the USA. Includes Hawaii, Alaska, and Puerto Rico. Any items with free shipping is free to a USA address only. Absolutely NO International sales on Knives. Gun parts, BB Gun parts or Air Rifle parts! Payments Payment is expected within ... morethree(3) days unless prior arrangements have been made. No excuses. We accept PayPal only. If you have questions or need additional information, ask BEFORE buying and we will try to get the information for you as soon as possible. Contact Us Please contact John. Through eBay messages. Please feel free to ask question prior to making your purchase. I try my best to answer question daily. If you feel you need to talk, I will send a phone number through eBay messages. Returns If for any reason you are not happy with your item(s) Please contact us to take care of the situation. If you need to return the item. please be sure it's properly packaged and shipped back to us within FOURTEEN(14) business days. Once we receive the item we will refund your money immediately. Sales Tax Sales tax of 8.25% of the total order will be charged on orders shipping to a Texas address. Feedback Our Feedback. To you, is automatic after we receive cleared payment. If there is ever a problem along the way, contact us for help before leaving a negative or neutral Feedback. A five star positive feedback is important to us! No matter what we will take care of you! THANKS FOR VISITING MY-PARTS
VINTAGE WILTON 9300N VISE MARKED CHICAGO 14 USA - 3 INCH JAWS OPENS 5 1/2 INCHES
VINTAGE WILTON 9300N VISE MARKED CHICAGO 14 USA JAWS ARE 3 INCHES& THEY OPENS 5 1/2 INCHES THIS VISE IS IN GOOD WORKING CONDITION THE METAL HAS DARKENED WITH AGE THERE IS SOME LIGHT PAINT SPLATTER. SOME NICKS, SAW MARKS& SOME LIGHT RUST PLEASE TAKE A GOOD LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-142ed1e6271-0xfd-
Wilton Vise Co. Pow-R-Arm 343-3 Made in USA Perfect for Baby Bullet Mounting
Up for sale is a reconditioned Wilton Pow-R-Arm 343-3. It has been disassembled. Stripped, primed with Rustoleum self-etching primer, and painted with Rustoleum Hammered Light Blue. The Pow-R-Arm operates perfectly, weighs 3 lbs. 1 oz, stands about 5" high and is about 4" wide. If you have any questions, please ask. Made in America. Shipped within one business day of confirmed payment. Thank you.
Wilton bench vise with 10 cm (4") jaws; red delicious!
Wilton vise in a lovely and largely perceptible red. This vise is generally in good condition- there is only light oxidation and the worm drive is smooth. The only significant flaw is a jaw that needs replacement. Jaw width is 100mm(3.94" Opening is 95mm(3.74" though of course it can go a bit more.
VINTAGE WILTON WOOD WORKING "CORNER" VICE VISE - USA MADE
VINTAGE WILTON WOOD WORKING"CORNER" VICE VISE- USA MADE_ eRiverCity. e B a y Auctions& Internet Sales We are located at'THE ANTIQUE GALLERY' Marietta. OH Ohio Valley's finest in antiques. Glassware and collectibles! eRiverCity is pleased to offer. For your consideration, this very collectible, nice VINTAGE WILTON( Maker) WOOD WORKING"CORNER" VISE USA MADE This is a very nice vintage corner vise. Made by Wilton and made in the U.S.A. The vise opens to 9" CONDITION: Very Good Condition! Typical(very minimal) wear from use but this tool has never been abused. See photos. A'must have' for any man needing a corner vise in his workshop! eRiverCity always guarantees authenticity and complete satisfaction! THANK YOU FOR VIEWING OUR eBay ITEMS! SHIPPING: This item will ship U.S.Mail- Parcel Select w/Confirmation ... moreAll items that are returned will be entitled to a full refund on the item. Shipping is refunded if we have misrepresent the item. For your convenience. We gladly accept Paypal! Ohio residents are required to pay 7.25% sales tax or provide required tax exempt information.
Wilton #1755 Tradesman Bench Vise w/ Swivel Base 5-1/2" Jaw W. x 5" Opening
Nice vise. Used in home garage only Posted with
VINTAGE WILTON CADET 9135 VISE WITH WILTON POWRARM 311 NICE CONDITION NO RESERVE
UP FOR AUCTION IS THIS VINTAGE WILTON CADET 9135 VISE. WITH WILTON POWRARM 311 NICE CONDITION. AS YOU CAN SEE IN THE PHOTOS THIS VISE& POWRARM ARE IN GREAT CONDITION, THERE IS NOT EVEN THAT MUCH WEAR ON THE PAINT. I DID NOT PULL OUT ASSEMBLY BUT THERE IS ANOTHER ONE OF THESE MODEL 9135 VISES SOLD ON EBAY THAT SHOWS 1957 AS THE DATE. I WOULD ASSUME THIS ONE IS FROM SAME TIME PERIOD. THE JAWS ARE 3 1/2" IF YOU HAVE ANY QUESTIONS PLEASE ASK. GOOD LUCK!
Vintage Wilton Bullet Bench Table Vise Tool,GOOD USED SURPLUS EQUIPMENT
VINTAGE WILTON BULLIT TYPE MACHINIST VISE. SURPLUS EQUIPMENT FROM SHOP. SHIPPING IS A GUESS AND I WILL REFUND BACK EXTRA IF LESS