In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
185.99
Buy It Now
Free Shipping
Condition: New
Location: Bell, United States
[Light Weight with Great Cutting Capability]: Ability to cut mild steel and stainless steel. Blade Material Alloy Steel. [Durable]: The blades are polished ... morefor longevity and are fully adjustable for blade gap.
$
367.60
Buy It Now
$52.70 Shipping
Condition: New
Location: Virginia Beach, United States
Low Shear Mixing Impeller. Propeller-Type Impeller. 5.25" Blade Length. Stainless Steel. 7.5" Height.
$
1500.00
Buy It Now
Condition: Used
Location: Fort Lauderdale, United States
Featuring a backgage for precise and accurate cutting. Model: Pexto 137-K.
$
548.34
Buy It Now
$282.03 Shipping
Condition: Brand New
Location: China
The machine is mainly used for circuit board shear, can also be applied to thin aluminum, iron, copper and plastic board shear. The upper and lower blades ... moreare made of alloy tool steel, which is light and labor-saving.
$
6399.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Shearing Thickness: 12" Gauge (2mm). Hydraulic Shearing Machine. Back Gauge : 31-1/2" (800mm). Shearing Length: 52" (1320mm). Weight: 1,210 lbs estimate ... moreonly . 220 Volt @ 60 Hz. Working Table Height : 34-1/2 (880mm).
$
106.34
Buy It Now
$19.99 Shipping
Condition: New
Location: China
[Light Weight with Great Cutting Capability]: Ability to cut mild steel and stainless steel. Ability to cut mild steel and stainless steel. [Durable]: ... moreThe blades are polished for longevity and are fully adjustable for blade gap.
$
309.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Shear capacity Ground and hardened knives. Mount to floor or sturdy workbench. Plate capacity: 3/16". why buy from us?. What's in The Box. Handle length: ... more32". Rod capacity: 1/2".
$
54.80
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
Its handle is large and has non-slip lines, which will make it very easy for you to use. It is made of steel. It is very round, don't worry about stab ... moreyourself and others like scissors, it is safer to use and carry.
$
9.75
Buy It Now
$6.95 Shipping
Condition: Used
Location: Houston, United States
$
84.27
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
Item model number KF5014. Part Number KF5014. Mini Benchtop Shear Easy Shear. Included Components shear. quick and easy way to cut mild steel sheet up ... moreto 16 Gauge (1.5 mm). Material steel. Finish Powder Coated.
$
10500.00
Buy It Now
Condition: Used
Location: Cincinnati, United States
10' Wysong Hydraulic Power Shear. Thís is not Operable. and is Not being used. Shear is in good running condition but. Shear is Floor Flush. Shear can ... morebe seen under power in the plant it is being removed from.
$
13.88
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
With a comfortable and non-slip handle, lever labor-saving design, built-in spring, easier to cut, make the work easier. - Made of high-quality special ... moresteel, excellent shear performance, can cut iron sheet.
$
500.00
Buy It Now
$100.00 Shipping
Condition: Used
Location: Fontana, United States
New Hermes Metal Shear. Used Table dimensions are: 14 3/4”L x 12”W x 3 3/4” HThere’s minor rust ,other than that it’s in good condition see all photos ... morefor more details and condition on item.Selling AS-IS Any questions call 626)494-7857
$
160.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
MAXIMUM SHEAR CAPACITY - Introducing our 10" hand plate shear, the ultimate cutting tool for all your needs. Designed to effortlessly cut through 1/4" ... moresheet steel, 2-3/4" x 3/16" flat steel, and 1/2" rod steel, this shear will handle any task with ease and precision.
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Item model number 3650. Part Number 3650. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending ... moreon the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle.
$
1500.00
Buy It Now
Free Shipping
Condition: Used
Location: Sedalia, United States
THIS LISTING IS FOR BESPOKE MANUFACTURED SCRAP SHEAR BLADES USED 301296776 , 60988167 COMES LIKE PICS BOLTS , WASHERS, MIXTURE MISCELLANEOUS MIX OF PARTS. ... moreUSED SOLD AS IS Shipping: Free Freight shipping to any business address with a forklift or loading dock. All residential are subject to a shipping / lift gate service surcharge of $100-350 depending on where you are located, we ship only to the lower 48
$
33.15
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Length of Cut 1-1/2". Overall Length 3-7/8".
$
39.99
Buy It Now
$20.50 Shipping
Condition: Used
Location: Madison, United States
Malco Tshd1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment - READ. Unit is missing some parts, what you see in the pictures is what you will ... moreget, please note this before purchasing
$
1499.00
Buy It Now
Condition: Used
Location: Higginsville, United States
$
9.99
5d 11h 39m 22s
0 bids
$9.99 Shipping
Condition: Used
Location: Portsmouth, United States
$
7.99
Buy It Now
$8.85 Shipping
Condition: Used
Location: Mattituck, United States
$
15.20
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description *Fine and clean cutting: The design of two parallel circular blades makes the whole cutting process smoother and more labor-saving. It is ... morealways very sharp, which makes the material cut more orderly. *Safe and portable: It is smooth and not as easy to stab as scissors, so it is safer to use and carry. The blade is small and easy to carry and store. *Easy to use: It is easy to operate and can be used by most people. When you use it skillfully, you will find that it is a very good tool and it is worth the money.Don't need electricity or other tools to avoid the trouble of power failure. *Durable structure: It is made of steel, which is firm and durable. If you accidentally fall to the ground, don't worry about damage.
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Cutting thickness : 2.5mm Soft steel plate: 2mm / stainless steel: 1.5mm No-load speed: 2000r/min Rated voltage : 110V Rated frequency ... more: 60Hz Rated power : 500W Packing size: 35*7*16.5cm Package weight: 2.6kg Description: Full copper core motor, smooth air inlet and exhaust system, good cooling performance, greatly improve the durability of the motor. The swing of the blade is smaller than that of the conventional scissors, which greatly improves the precision of your work! Features: 500W power dust-proof motor for maximum performance in harsh environments. Special bearings are used to perfectly match high-power motors. Scope of application: The product is a double-insulated hand-held power tool that uses a single-phase motor as the power to drive the working h.
$
6800.00
Buy It Now
Condition: Used
Location: Sherman, United States
3 PH, 460V. 1800 rpm, 240V. 3 HP, 208V. Oil Reservoir Capacity.
$
30000.00
Buy It Now
Condition: Used
Location: Cedarburg, United States
Geka Model: Hydracrop 110/SD. Max Tonnage Capacity: 180 Ton Shearing Capacity, 120 Ton Punching Capacity. Flat Shear Capacity: 24" x 5/8", 16" x 3/4". ... morePunch Capacity: 1-1/2" in 3/4". Angle Shear Capacity: 6.5" x 6.5" x 0.5".
$
521.95
Buy It Now
Free Shipping
Condition: New
Location: Bellingham, United States
T27140 12" Heavy-Duty Bench Shear. The complete and easy-to-read manual makes it easier to assemble and maintain your shear.
$
112.99
Buy It Now
Free Shipping
Condition: New
Location: Flanders, United States
MAXIMUM SHEAR CAPACITY - Introducing our 8" hand plate shear, the ultimate cutting tool for all your needs. Designed to effortlessly cut through 1/4" ... moresheet steel, 2-3/4" x 1/4" flat steel, and 1/2" rod steel, this shear will handle any task with ease and precision.
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: Wrightsville, United States
Item is in"Good" condition and has minor signs of use. Each feature has been fully tested and is 100% functional. Item is in"Good" ... morecondition and has minor signs of use. Each feature has been fully tested and is 100% functional. Each feature has been fully tested and is 100% functional. No additional information available. CLICK THUMBNAIL TO SUPERSIZE IN NEW WINDOW. Please see the manufacturer's website for product information and specifications. Checkout After winning an item in auction or completing a Buy It Now purchase: Check-Out Now! Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Payments must be received within 4 days from the auction end date. If payment is not received a dispute will automatically be opened in eBay for non-payment. This is an automatic process not manual so please pay promptly. Payment We accept the following forms of payment through eBay's checkout only: Sales Tax: For shipments to Texas addresses. We are required by State law to collect 8.25% Tax. Shipping We can only ship to the Contiguous United States(48 States) and do not allow local pickup at this time(no exceptions) Additionally. We cannot ship to P.O. Boxes, A.P.O.s or F.P.O.s. Shipping costs displayed on the auction is based on packaging. Labor and freight cost. Your item will be shipped within two(2) business days from the date your payment is received. Only standard shipping is available and we cannot offer any upgrades at this time. COMBINED SHIPPING: SAVE 40% ON ADDITIONAL ITEMS ON THE SAME INVOICE. EBAY WILL CALCULATE THE SHIPPING COST AUTOMATICALLY AT 40% OFF EACH ADDITIONAL ITEM MINUS THE SHIPPING COST OF THE ITEM WITH THE HIGHEST SHIPPING COST ON YOUR INVOICE. SEE OUR TERMS AND CONDITIONS OF THIS OFFER FOR MORE DETAILS. TO BE ELIGIBLE FOR COMBINED SHIPPING YOU MUST PAY FOR ALL OF YOUR ITEMS AT THE SAME TIME. ON THE
$
72.09
Buy It Now
$49.99 Shipping
Condition: New
Location: United States
MAXIMUM SHEAR CAPACITY - Introducing our 8" hand plate shear, the ultimate cutting tool for all your needs. Designed to effortlessly cut through 1/4" ... moresheet steel, 2-3/4" x 1/4" flat steel, and 1/2" rod steel, this shear will handle any task with ease and precision.
$
97.99
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
Blade length. Sheet steel. Capacity (in). Round steel. Flat steel. Steel Handle.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Jacksonville, United States
If you have any issues or concerns about your order reach out to us and we will be more than happy to help solve your issue. END OF LIFE / FOR PARTS ONLY: ... moreItem Will Be Heavily Used With Limited Lifespan Left.
$
449.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Built to Last: Crafted with the utmost durability in mind, our shear press brake is constructed using HT200 material casting. The T10 material shearing ... moreblade ensures clean cuts without burrs, while the 45# material bending blade and roller provide exceptional resistance to deformation.
$
15.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Coffeyville, United States
SHEAR BOLTS. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. GL/#8/SKID 281/(1)AAT BOX: SFR.
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: Full Copper Core Motor, Smooth Air Inlet and Exhaust System, Good Cooling Performance, Greatly Improve the Durability of the Motor. the Swing ... moreof the Blade Is Smaller than That of the Conventional Scissors, Which Greatly Improves the Precision of Your Work! The Package Includes: 1x Electric Iron Scissors Features: 500w Power Dust-proof Motor for Maximum Performance in Harsh Environments. Special Bearings Are Used to Perfectly Match High-power Motors. Weights&Dimensions: Packing Size: 35*7*16.5cm Package Weight: 2.6kg Specification: Cutting Thickness : 2.5mm Soft Steel Plate: 2mm / Stainless Steel: 1.5mm No-load Speed: 2000r/Min Rated Voltage : 110v Rated Frequency : 60hz Rated Power : 500w.
$
349.99
Buy It Now
$14.00 Shipping
Condition: Used
Location: Elkhart, United States
UP FOR SALE IS A REAL NICE AND VERY CLEAN EASTMAN BUZZAIRD PNEUMATIC CUTTER. IT RUNS 20.000 RPM'S WITH 90 PSI AIR. THIS IS A VERY HIGH QUALITY CUTTER ... moreWITH A LOT OF CUTTING POWER. THERE IS A SPLICE ABOUT 24" FROM THE END PLUG YOU CAN SEE IT IN THE LAST TWO PICTURES. THE HOSE IS ABOUT 90" LONG. IF YOU DON'T KNOW THIS CUTTERS NEW SELL FOR OVER $800.00 PLUS TAX. HERE'S YOUR CHANCE TO BUY ONE AT A BARGAIN PRICE. PLEASE BE REASONABLE WITH YOUR OFFERS. THANKS FOR LOOKING, GOOD LUCK!
$
32.19
Buy It Now
Free Shipping
Condition: New
Location: Garfield, United States
The blade is designed to fit the 400400 PO 18369 model, ensuring a perfect fit and optimal performance.
$
11450.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Hydraulic Shearing Machine. Shearing Thickness: 16 Gauge (1.6mm). Back Gauge: 31-1/2" (800mm). Weight: 2,508 lbs estimate only . 220 Volt @ 60 Hz. Working ... moreTable Height: 34-1/2 (880mm). Shearing Length: 98" (2500mm).
$
129.95
Buy It Now
Free Shipping
Condition: Used
Location: Oley, United States
Tested and works in 110 outlet. Good condition, normal signs of use. Includes: Bosch GSC metal shear only. BOSCH GSC 3,5 Type: 0 601 507 103 220v, 4.5a ... more900w 1996 made Please See Photos for Details. Thank You For Viewing Our Item.
$
191.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Item model number TSMD. Part Number TSMD. The clamp collar allows the shear head to be rotated 360° and set in any position for optimum tool clearance. ... moreThe blades of Malco Double-Cut TurboShear removes a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut.
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Cutting thickness : 2.5mm Soft steel plate: 2mm / stainless steel: 1.5mm No-load speed: 2000r/min Rated voltage : 110V Rated frequency ... more: 60Hz Rated power : 500W Packing size: 35*7*16.5cm Package weight: 2.6kg Description: Full copper core motor, smooth air inlet and exhaust system, good cooling performance, greatly improve the durability of the motor. The swing of the blade is smaller than that of the conventional scissors, which greatly improves the precision of your work! Features: 500W power dust-proof motor for maximum performance in harsh environments. Special bearings are used to perfectly match high-power motors. Scope of application: The product is a double-insulated hand-held power tool that uses a single-phase motor as the power to drive the working h.
$
9.99
6d 13h 54m 40s
0 bids
$18.60 Shipping
Condition: Used
Location: Hoosick Falls, United States
VINTAGE WISS#8 13 1/2" METAL SHEARS TIN SNIPS BLADES USED PAYPAL ONLY
$
100.00
5d 12h 20m 29s
0 bids
$25.25 Shipping
Condition: Used
Location: Sandston, United States
Used but in perfect shape works good
$
250.00
Buy It Now
$17.45 Shipping
Condition: New – Open box
Location: Long Beach, United States
The M18 18 Gauge Double Cut shears are optimized for making straight cuts.
$
1500.00
Buy It Now
Condition: New – Open box
Location: Cedarburg, United States
Set of 3 Industrial Wysong/Cincinnati Shear Blades. Overall Length: 141". WE'LL DO OUR VERY BEST TO MAKE IT SO! Distance on Center of Mounting Holes: ... more8". SPEC'S SUBJECT TO FINAL INSPECTION.
$
41.89
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
The adjustable slider allows for cutting angles ranging from 45°, 60°, 75°, 90°, 120°, and 135°, enabling you to effortlessly position your molding at ... morethe desired angle and achieve diverse shapes when cutting trunking.
$
57.59
Buy It Now
Free Shipping
Condition: New
Location: United States
A swiveling head lets you cut curve that give a smooth clean appearance. Cutting speed (ft/min) 2500. Cord Length (ft) 6. Cutting radius of 5-1/2 in. ... moreand larger. Variable speed (0-2500) SPM for versatility in cutting a variety of materials.
$
2000.00
Buy It Now
Condition: Used
Location: La Vergne, United States
I bought this shear new from Baileigh about 3 years ago. Its been used maybe a dozen times to shear aluminum sheet. This shear is in new condition and ... moreshows no signs of wear what so ever. I would rate this machine a 9.5 out of 10. I closed my business so I no longer need this machine and I don't want to pay to keep it in storage. Buy it now and save big! I will build a special heavy duty skid for this machine and the buy it now price is reflecting my time and materials to skid it($1625 for the shear and $150 time/materials to build the skid = $1775) BUYER RESPONSIBLE FOR ALL FREIGHT/SHIPPING ARRANGEMENTS. We are located at a commercial business with a forklift so loading the machine is no problem. To obtain a freight quote check freight brokers such as: Freight101.com, FreightCenter.com, FreightQuote.com or UShip.com, use the dimensions and weight below to get the best quote. Good luck and if you have any questions don't hesitate to ask. Baileigh Description: The SF-5216E foot shear is able to shear 52" of 16 gauge mild steel. High chromium blades offer long life and have the ability to be resharpened. Front supports help the operator with alignment and an integrated back stop allows for repeatability of cut. A ridged cast frame rounds out the list of impressive features on the SF-5216E. Shipping Weight: 1200 lbs. Shipping Dimensions: 66" x 30" x 46"
$
1299.99
Buy It Now
$450.00 Shipping
Condition: New
Location: China
$
100.14
Buy It Now
Free Shipping
Condition: New
Location: Irving, United States
Inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It's that easy to convert your power drill to a power shear! For premium ... moreperformance without the premium price of a dedicated power shear, it's is an easy addition to every tool bag.
$
15900.00
Buy It Now
Condition: Used
Location: Imlay City, United States
ATLANTIC 10’ X 1/4” HYDRAULIC POWER SQUARING SHEAR NEW: 2008/ MODEL HDE-1014 SPECIFICATIONS CAPACITY(MILD STEEL) 1/4″ CAPACITIES RATED FOR MILD STEEL: ... more60.000 PSI, CAPACITY(STAINLESS STEEL) 10 GA, CUTTING LENGTH: 122″ ANGLE ADJUSTMENT: 1– 3 DEGREES, NUMBER OF PLATE HOLD DOWNS: 18, NUMBER OF STROKES/MIN: 10– 25, LENGTH SQUARING ARM: 40″ REACH BACKGAUGE: 39″ WORKING HEIGHT: 31″ MOTOR: 15 HP, DIMENSIONS: 157″ L X 77″ W X 63″ H, WEIGHT. APPROX. 10,500 LBS, ELECTRICS: 220 VLOTS. 3 PH, 60 CYC, EQUIPPED WITH HYDRAULIC MOTOR/PUMP-GROUP, 2 UNDERDRIVEN CYLINDERS, CUTTING ANGLE ADJUSTMENT, QUICK BLADE GAP ADJUSTMENT, PRESSURE ON PLATE HOLD-DOWNS INDEPENDENTLY FROM SHEAR PRESSURE, PROTECTION AGAINST OVERLOAD, HIGH STANDARD BLADES WITH 4 CUTTING SIDES, MOTORIZED BACKGAUGE, SQUARING ARM, HIMES MACHINERY LLC. PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING*
$
24.99
4d 12h 11m 23s
0 bids
$17.45 Shipping
Condition: Used
Location: Colfax, United States
$
92.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
1 x Electric Scissor. Electric Shear. arsenic and chromium from chemically treated lumber. Cutting Stainless Sheet Thickness: 19 Gauge. - Soft grip handle ... morefor comfort and grip when using the tool. - LED Spot Light.
$
4000.00
Buy It Now
Condition: Used
Location: Hugo, United States
Capacity: 52" x 16ga. Model: 653. Foot rail trip system. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our ... morefacility in Hugo, MN 55038. Front support arm.
$
59.99
Buy It Now
$17.45 Shipping
Condition: New – Open box
Location: Wayzata, United States
Wild Edge 14 Gauge Swivel Head Electric Sheer. Wide Edge 14 Gauge Swivel Head Electric Sheer Tool. New - Open Box Item. This item has been inspected and ... moretested and is complete and in working condition.
$
21.67
Buy It Now
Free Shipping
Condition: New
Location: United States
Item Type: Angle Shear. Suitable for cutting a variety of materials, thin wood, plastic and wire slot. The blade is quenched which is of sharpness. Blade ... moreLength: Approx. 100mm / 3.9in. Feature: 1. Ergonomic handle design, comfortable grip and non-slip.
$
52.20
Buy It Now
Free Shipping
Condition: New – Open box
Location: Bartow, United States
SH111002AEOPEN BOX | BOX HAS WEAR AND TEAR
$
8.00
Buy It Now
$6.09 Shipping
Condition: Used
Location: Hamilton, United States
The handle coating has discoloration and staining. I may use recycled boxes in order to be more eco-friendly.
$
39.16
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
[Achieve Perfect Trim Cuts with Ease!]. The adjustable slider allows for cutting angles ranging from 45°, 60°, 75°, 90°, 120°, and 135°, enabling you ... moreto effortlessly position your molding at the desired angle and achieve diverse shapes when cutting trunking.
$
1779.95
Buy It Now
$160.00 Shipping
Condition: New
Location: League City, United States
Combination Shear, Bending Length (In.). 30.25 in, Cutting Width (In.). 30 in, Rolls Min 1 1/2 in, Capacity of Mild Steel (Gauge) 20, Finger Width (In.). ... more1 in, 2 in, 3 in, 6 in, 8 in, 10 in, Dual Edge Adjustable And Reversible Blade, Cast Iron, Die Carbon Steel, Heat-treated Steel Male, Sizes 1, 2, 3, 6, 8 And 10 in, Continuous Female V Shaped Forming.
$
39.26
Buy It Now
$37.60 Shipping
Condition: New
Location: Falls City, United States
Due to the cutting process, length may vary +/- 1/16in and sharp edges may be present. Exercise caution when handling. Unless you specify otherwise, this ... moreitem will be shear cut. A sheared cut is acceptable for most applications, however a saw cut is more accurate and leaves a better edge.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Former Listings  
 
H.K. Porter 38" Angle Iron Shear HKP No. 2790
H.K. Porter 38" Angle Iron Shear HKP No. 2790. Works great! Thanks for looking! Email questions. Check out our other listings.always happy to combine shipping when possible! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f0675153e-0x103-
0.5" Cap. 240" W Cincinnati 4FL20 SHEAR
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 0.5" Cap. 240" W Cincinnati 4FL20 SHEAR Ref# 144605 iammdna XSHRHY 20' x 1/4" CINCINNATI Hydraulic Power Squaring Shear Model 4FL20 New 1974 Maximum Shearing Thickness: 1/2" Maximum ... moreShearing Length: 20' Length Between Housings: 20' 3" Back Gauge Range: 36" EQUIPPED WITH: 36" Front Operated Power Back Gauge, Right Hand Squaring Arm(approx. 15' Ball-Transfer Support Stands Light Beam Shearing Gauge Electric Foot Switch Control 40 HP Main Drive Motor(460 Volt) Weight. Approx. 89,600 Lbs. Dimensions. Approx. 265" L-R x 120" F-B x 130" H Machine Location: PHILADELPHIA. PA Click Here For More Cincinnati Machines Click Here For More Shears- POWER SQUARING SHEARS(inches) s) Questions about this Machine? Call Rick at(800) 873-6224 ext 7560 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete details on how this works. New machines are covered under their own warrantee
Metal Shear, Banding Tool, Cutting Tool,
I am not exactly sure what this is. But I believe it is a metal shear as I cut some metal with it a couple times. It may or maynot have been used in doing banding in a commercial shop. You please look close and you be the judge as I'm saying up front I am NOT SURE what it is. It has Signode Corp. Chicago, IL on the side of the handle. It is heavy and has long arms that allows you to cut metal with ease and not much muscle power. It does look like the handles have been welded in a couple places to strengthen it I guess. The tool is about 24" long and approximately 3" high. I will ship anywhere in the continental USA for $20. This tool works good up and down and just needs some dusting off and maybe a little oil to make it look and work real good. Rare piece of USA workmanship that will make your shop work much easier. I believe ... moreit to be a Metal Shear. But use your own judgement and bid high and bid often.
Power Shear 3' / 16 Ga / 3 Phase
DiArco 36" power shear 16 ga 3 phase Worked when we still had 3 phase service Buyer responsible to pick up- no shipping Located in Northern Michigan Posted with
DeWalt DW941 Heavy Duty Cordless 14.4V 18 Gauge Swivel Head Shear Kit
Used. But not used much, with case, charger and battery.
SKILL PRO SWIVEL HEAD SHEET METAL SHEAR/NIBBLER #6927,VSR,0-2500SPM,3.5A,TO 14GA
WE RATE THIS AT A 4.75 STAR ON A 5 STAR SCALE WORKS LIKE NEW FEATURES: SKILL PROFESSIONAL SHEET METAL SHEARS MDL. 6927 SOMETIMES REFERRED TO AS A"NIBBLER" ALL BALL AND NEEDLE BEARINGS VSR = VARIABLE SPEED REVERSING. 0-2500 SPM PRECISION GROUND BLADES 360o ROTATING HEAD 14Ga CAPACITY TRIGGER LOCK DOUBLE INSULATED MADE IN USA
Shingle Shear
Here is what's for sale: The first photo shows the kit assembled with plywood. I will not ship the plywood. I will disassemble and ship the kit as I purchased it. The second photo shows the box it was shipped in, that's what I will send it in, along with the manual. I bought this last year to build a small barn, it cut architectural shingles with no problem, I was very happy with how well it worked. It's in good shape, I kept it indoors. There is an adhesive backed, flexible inch scale that is applied to the lower edge of the plywood, I'm not sure I'll be able to remove that without damaging it. You can buy these kinds of adhesive backed scales in sewing shops, or you can draw inch marks on the wood.
Diacro Model 36 PWR 36" Power Squaring Sheet Metal Shear
Diacro Model 36 PWR 36" Power Squaring Sheet Metal Shear-Inv#8394 You are bidding on a Diacro Model 36 PWR 36" Power Squaring Sheet Metal Shear-Inv#8394 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken direct ... morefrom service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N:2380580259 Voltage: 230V/3PH/60HZ Motor: 1-1/2 HP Capacity: 16 gauge. Mild steel
TENNSMITH 10' SHEAR
Tennsmith Shear. Serial No. 07605, Model No. LM1010, 10' 10ga, Rear Return Air Operated Sheet Support System, Quick Acting Manual Operated 30" Back Gauge with Digitial Read Out, Gear Driven 12hp Motor, 6' Squaring Arm for Left Side, 2 Front Arms, Oil Filled Gear Box, Made in the USA, 230 volts, 3 Phase, Has Cut Less than 40 Cuts since New, Shipping Weight is 9,400lbs, Shipping Class is 85, Dimensions 145 x 39 x 59.5(less gauges) Dimensions 145 x 78 x 59.5(floor space, gauges in position) In Excellent Condition. The cost of a new one is $34,000.00.
Ingersoll-Rand Air Shear 7812G with Nibbler
You can download the manuel at ingersollrandproducts.com Heavy Duty Air Shear This versatile cutting shear makes clean cuts in cold rolled steel up to 20 gauge without chips. Ideal for body shops. Sheet metal shops, air conditioning fabricators, plastic fabricators, heating contractors, and machine shops. View Model Specifications Features Heavy duty cutting blades are dureable and strong enough to handle tough tasks Variable speed trigger gives you the ability to adjust the tool's speed Diffused handle exhaust blows air away from your work. Ergonomic grip ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13f0c4b3e31-0xfe-
Niagara No 136 Squaring Shear 36" x 18 Gauge
This listing is for a Niagara Squaring Shear. Model No 136 36" bed width 18 Gauge Feeder arms extend 26" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items ... moremust be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact our offices at
Cincinnati 10 foot 1/4 inch Mild Steel Shear
Cincinnati 10 foot 1/4 inch Mild Steel Shear serial number 14143. We purchased this as part of an acquisition, but already have enough shears. Selling as surplus to our ongoing operations. Was running as of last week with no issues, now in storage at the riggers warehouse. Note: Item is located in Sparta. NJ 10 foot Shear
GREENLEE 776 Ratchet Cable Cutter, 19", Shear Cut
Greenlee HK520 Hydraulic ACSR Cable Cutter Slightly used but in like new condition. Everything works properly
3-1/4" X 3-1/4" NOTCHER PRESS BRAKE PUNCH PRESS SHEAR 90 DEGREE
3-1/4" X 3-1/4" NOTCHER PRESS BRAKE PUNCH PRESS DIACRO, 3-1/4" X 3-1/4" 90 DEGREE NOTCHER. USE IN PUNCH PRESS. BRAKE, ETC. WE HAVE 2 IDENTICAL NOTCHERS LISTED. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
#1812 CINCINNATI 12' x 1/4" Mechanical Power Squaring Shear '73
Preowned 12' x 1/4" CINCINNATI Mechanical Power Squaring Shear. Model 1812, S/N 38935(New 1973) Cutting length Length between housings Capacity. Mild steel Speed Rake taper per foot Ram adjustment Back gauge range Gap Number of holddowns Distance under holddowns Total holddown force Depth of pit required for bed 12' 12'3" 1/4" 60 S.P.M. 1/4" 11/16" 36" 18" 13 1/4" 9 ton 6" Equipped With. Air actuated mechanical clutch with remote electric foot pedal control 36" Capacity front operated power back gauge 12' Capacity left hand squaring arm(2) Front support arms Dual air counterbalance cylinders(13) Hydraulic holddowns(5) T-Slots in shear bed and(1) full length t-slot in front of shear bed(1) Set of blades Centralized lubrication system 1/2 H.P. 3/60/240-480 volt back gauge motor ... more20 H.P. 3/60/220-440 volt main drive motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 22.600 Lbs. Approximate Dimensions(Without Squaring Arm& Front Support Arms) 182" L-R x 82" F-B x 80" High, Condition: Very Good, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
Cincinnati Mechanical Shear Bronze Flywheel
SquareTrade © AP6.0 Cincinnati Mechanical Shear Bronze Flywheel ID= 34" OD= 42" Shear AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856)
Cincinnati Shear Blades, 10' 1.5" x 6"
SquareTrade © AP6.0 Cincinnati Shear Blades. 10' 1.5" x 6" Hole spacing 8 in between centers 3 good edges Fits 10' x 1" Cincinnati Mechanical Shear 720 lbs. AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are ... morecharged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you w
Beverly Model B1 Throatless Hand Metal Shear, Excellent Condition
Description Beverly Shear Beverly Model B1 throatless hand operated metal shear. This is a circa 1950's shear. But it looks and performs like a new one. Blades are sharp and there are no breaks or repairs to the body. Complete with handle and grip. This has a capacity of 4.25 inches and will cut up to 14 gauge mild steel or 18 gauge stainless. Great for the handyman or automotive enthusiast, this came from the estate of a metal artist. Check the photos and feel free to ask any questions. See my other auctions for more metal and woodworking tools. Thanks for looking! Payment and Shipping We gladly accept PayPal. You can expect an e-mail from us within 24 hours of auction end giving total cost and payment options. Shipping costs are included in most auction listings. If you want to use PayPal you can at any time after the auction ends. ... moreWe expect payment to us within 3 days of auction end. Shipping costs shown with eBay's estimator are approximate USPS costs. I use FedEx Ground for most shipments over 3 pounds and the estimator does not support FedEx. Often times they are less. Occassionally they are more. I will send you an invoice with the best deal for shipping. I am always willing to ship a faster way if you want and I always am happy to combine shipments to save on costs. Just ask for options! Same for foreign bidders- we will be happy to provide speed and cost options anywhere in the world. Thank you for viewing my auction! Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Just one of inkFrog's Creations inkfrog terapeak. I000000. InkFrog Analytics.
Vintage double cutting hand tool for sheet metal/tin/shear Stove pipe/crimping
Vintage double cutting hand tool for sheet metal/tin/shear Stove pipe/crimping.I believe this is a Pexto.Can not see any name has surface rust did not want to oil or clean but this tool seems to work very well.ask any questions before bidding.thanks for looking!FREE SHIPPING!
Pearson Hydraulic Shear 10' x 3/8"
Used in good shape. A Pearson Model 5608 Hydraulic shear. Has a spare set blades. 220/440 3 phase. Has working backgage.ready for use. This shear is heavy and must be moved by a certified rigging company at buyers expense.please message for more details.Payment and Shipping/pickup arrangements need to be made within 7 days of auction end or contact with us at minimum.we are more than willing to work with you. This machine retails used for 19.500 Thanks For Looking. Posted with
Sunbeam Stewart ShearMaster 31B-2 Sheep Shear with Extra Blades
Sunbeam Stewart ShearMaster Sheep Shear Model 312B-2 with Extra Blades. This turns on and functions fine but I have no sheep to try it out on. High Quality vintage sheep shear machine. Also comes as shown with several used spare blades and some paperwork. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f019ede3e-0xff-
PCB Piezotronics Shear Accelerometer Sensor (353B16)
This is a used Piezotronics Shear Accelerometer Sensor. Part Number: 353B16. You will have to forgive me as I am selling these from our engineering department and I am still getting a grasp of what these items exactly are. The details for the sensor provided on the Data Card are as follows: Sensitivity: 10.59 mV/g(1.080 mV/m/s2) Range: 1-10000 Hz. Bias Level: 8.4V. If you have any question. Feel free to drop me a message. The posted rate for shipping is for the 48 states ONLY. We will ship international but please contact me before bidding for an accurate shipping rate.
MILWAUKEE CORDED 18 GAUGE (1,2MM) 4 AMP 120V SHEAR 6850
UP FOR AUCTION IS A USED MILWAUKEE CORDED 18 GAUGE(1.2MM) 4 AMP 120V SHEAR MODEL: 6850 SHEAR IS IN FINE WORKING ORDER SHEAR HAS NORMAL WEAR FOR BEING USED GOOD LUCK BIDDING! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f1194cb15-0x100-
Collectable PeoplesDrug Shear Strips Tin , Vintage Collectible .
Collectable Peoples Drug Shear Strips Tin. Vintage Collectible. The Tin is a used container showing some usage. But is not dented, scratched and paint is intact. Peoples Drug was a chain of drug stores based in Alexandria. VA. A suburb of Washington. D.C. 1] Founded in 1905. Peoples was subsequently purchased by Lane Drug in 1975. Imasco in 1984. And finally by CVS in 1990. Which continued to run the stores under the Peoples banner until 1994, at which time the stores were converted to CVS, marking the end of the use of the Peoples Drug name. I take great pride in my customer service and make every attempt to describe each item as accurately as possible. This is a vintage item and has been used. It is not store new, therefore, it is being sold AS IS, so please email me with any questions you may have and be specific as you can so you have ... moreall the information you need to bid on it. Would make a nice additional to anyone's collection.
diacro power shear 24inch presision sheet metal shop protoype machine
Diacro 24 inch power shear. with micrometer precision backgage. 16 ga mild steel x full length with front material hold down gaurd. 220 volt 3 phase.
ACCURSHEAR 3/8 x 12 Hydraulic METAL SHEAR
Check Our 100% Feedback! JACK 800-382-8322 8AM-8PM. 6 DAYS PLEASE CALL TO CHECK AVAILABILITY BEFORE BIDDDING. 12' X 3/8" ACCURSHEAR HYDRAULIC SHEAR PRICE: FOB Philly area PA… $34.500.00 Stock# 13152. Serial# 471 New 1985 Model# B837512. Original Factory Capacities Based on 80.000 Tensile Strength Mild Steel. Capacity: 3/8" Mild Steel. Length: 12' Overall Table Length: 155" Floor Line to Table: 32" Knife Size: 1" x 3" x 148" Number of Hold Downs: 14. Hold Down Tonnage: 14 Tons. Cycles Per Minute. Full Stroke: 9. Cycles Per Minute. Short Stroke: 40. Throat: 12" Table Depth: 28-5/8" EQUIPPED WITH: Solid Steel Table with Built in Roller Balls. Finger Guard. Blade Clearance Adjustment. Front Operated 48" Powered Back Gage. Foot Pedal. 12' Squaring Arm. Extra Set of Knives. Manuals. ... more30 HP Main Motor. Wired for 3 Phase. 60 Cycle, 230/460 Volts(Currently 460 Volts) Overall Size: 168" L-R x 105" F-B x 94" H x 30.200 Lbs. WE RESERVE THE RIGHT TO CANCEL/ END THIS LISTING AT ANY TIME AS WE HAVE LOCAL SALE REPS PROMOTING THIE MACHINE. WE INVITE YOU TO SEE THIS MACHINE. WE LOAD NO CHARGE. WE CAN ARRANGE FREIGHT. BUYER TO PAY FREIGHT. Thanks for looking! Hildebrand 717 846 2600 june13
Break Shear combo
This is a little 8 inch shear and break combo tool. It is not broke and works fine. I have no need for it so I am listing it here. The bottom die is included. These things range up to 350 dollars and i am selling for half that. If you have interest or would like to know more about it Please contact me
Pexto Roper whitney Model 137 37" 16g jump foot shear HVAC sheet metal machine
please scroll down and view all the photos. The title is not a complete description so please read the ad description. You Are Bidding On A Pre-Owned Description Pexto 37" foot shear Model 137 with back gage support arms 1000# shipped mfg info Capacity 16G Mild Steel Capacity 20G stainless EQUIPPED WITH back gage 27"range support arms UNIT WEIGHT. 1.000 LBS. There is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact ... morewithin 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. I always return feedback so leave some good comments so I can do the same for you. Please see my other auctions. You never know what bargains you will find! Thanks much and happy bidding Shipping Shipping paid by buyer. USA ONLY. I combine shipping where possible so buy all you like. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or stora
Bodine Concrete Pulverizer Crusher Shear Attachment - CAT Genesis Labounty NPK
Bodine concrete pulverizer shear attachment for excavator/ Pins and stiff arm includ ed/ Approximate measurements: Main pin diameter 80mm. Bucket cylinder pin 80mm. Stick width opening approximately 14" with bushings and 15" without bushing in/ Main pin is bent slightly/ Fits 200 size machine(40.000lbs) Excavator/ Brand is Bodine/ Model is unknown/ Located in Lockport. NY(Buffalo/Niagara Falls Area) Call KARL@ 716)622-7041. 24 Hours notice is needed before pick-up. Item must be paid for in full within 5 business days of auction/listing end. You have 45 Calendar days to pick up your item. If it is not picked up within 45 days. It will be resold and you will receive nothing. Not responsible for item while being stored. Sold as is. We have a forklift to load. I am not the original owner. I do not make any guarantees as to condition ... moreor what this will fit. SOLD AS IS. Flat rate shipping is business to business within the continental United States. You must have a business address and a forklift to unload. Sales Tax will apply unless you have proof of exemption. Methods of payment accepted: Paypal($200 Maximum) Wire Transfer, Check(must clear before pick-up, no exceptions) sorry no credit cards. Check out our other items!
Concrete Pulverizer Crusher Shear Attachment fits 200 Size Excavator - 80mm Pins
Concrete pulverizer shear attachment for excavator/ Stiff arm includ ed/ Pin hole diameters: 80mm. Stick width opening approximately 14" Fits 200 size machine(40,000lbs) Excavator/ Brand and Model is unknown/ Attachment has weld repair. Plating and cracks/ Located in Lockport. NY(Buffalo/Niagara Falls Area) Call KARL@ 716)622-7041. 24 Hours notice is needed before pick-up. Item must be paid for in full within 5 business days of auction/listing end. You have 45 Calendar days to pick up your item. If it is not picked up within 45 days. It will be resold and you will receive nothing. Not responsible for item while being stored. Sold as is. We have a forklift to load. I am not the original owner. I do not make any guarantees as to condition or what this will fit. SOLD AS IS. Flat rate shipping is business to business within the continental ... moreUnited States. You must have a business address and a forklift to unload. Sales Tax will apply unless you have proof of exemption. Methods of payment accepted: Paypal($200 Maximum) Wire Transfer, Check(must clear before pick-up, no exceptions) sorry no credit cards. Check out our other items!
Makita Shear JS1600 MAKITA SHEET METAL SHEAR
NICE USED MAKITA JS1600 SHEET METAL SHEARS. IN WORKING ORDER. ONLY SHIP IN THE LOWER 48 STATES THANKS FOR LOOKING
12' X 1/4" NIAGARA POWER SQUARING SHEAR MODEL #JL 12
12' X 1/4" NIAGARA POWER SQUARING SHEAR MODEL#JL 12 12' X 1/4" NIAGARA POWER SQUARING SHEAR MODEL#JL 12: STOCK# 59883 SPECIFICATIONS SERIAL. 43071 MODEL. JL-12 CAPACITY. 1/4" MILD STEEL CAPACITY STAINLESS. 5/32" LENGTH OF BLADES. 12'2" REAR OPERATED BACK GAUGE. 24" DEPTH OF THROAT. 18" MECHANICAL HOLD DOWN. RAKE. 5/16 PER FOOT STROKES PER MINUTE. 60 FULL LENGTH FOOT TREADLE. YES AUTOMATIC LUBE SYSTEM. YES PASSLINE LINE HEIGHT. 30" MOTOR. 15 HORSEPOWER CALL US FOR SHIPPING QUOTES YODER MACHINERY STOCK#59883 We accept Visa. Master Card, American Express, Discover. We also accept Paypal. All purchases under $ 100.00 are expected to be paid within three days of end of auction. Multiple and single winning bids, totaling between $100.00 to $ 999.00 will need to be paid within two days of end of ... moreauction. Multiple and single winning bids over $ 1,000.00 need to be paid by the next business day and we ask that you have your finances in order before end of auction. Buyers are responsible for all shipping and handling charges. Please know the cost of shipping before placing your bid. If you have your own truck. Trailer or have arranged your own freight we can load your large item or machine free of charge. All orders being shipped to PO Boxes must be delivered via the United States Postal Service(USPS) Shipping rates are available at www.usps.com. Weight restrictions may apply. The United Parcel Service is another option for packages under 150lbs. Shipping rates are available at www.ups.com. Estimated UPS and USPS delivery time within the US is 3 to 7 business days from the time the order is processed. Orders above 149 lbs. must be shipped via freight carrier. Yoder Machinery has discounts available from a number of common carriers/ trucking companies. We would be happy to quote you a fre
HUSKY AIR TOOL SET! IMPACT WRENCH! SHEAR! ANGLE DIE GRINDER! SANDER! AND MORE!
up for bid is HUSKY AIR TOOL SET! IMPACT WRENCH! SHEAR! ANGLE DIE GRINDER! SANDER! AND MORE! UNIT INCLUDES: HSTC4141 1/2" IMPACT WRENCH CAT822 AIR SHEAR HSTC4715 1/4" ANGLE DIE GRINDER HSTC4771 HIGH SPEED SANDER HSTC4822 3/8" REVERSIBLE DRILL HSTC4005 3/8" RATCHET WRENCH GENERAL PURPOSE GLOVES BY GREASE MONKEY HUSKY PORTABLE TOOL BOX take a look at the pictures and decide before buying at the store. expensive new. units weigh total 12 lbs all equipment and parts is sold AS-IS WHERE-IS w/ no warranty. No returns. shipping costs are the sole responsibility of the buyer. yes we ship to canada you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows usps or pick-up is available On Nov-25-07 at 07:27:27 PST. Seller added the following information: On Dec-29-08 at 22:13:14 PST. Seller added ... morethe following information:
Unopened Green & Amber Blown Chinese "Opium" Type Shear Top & Vial Bottle
This is a Three(3) day listing is for both bottles in the pictures the Green bottle looks almost Black and the other is Amber and both are sealed with contents. The Amber bottle comes with the darker red box which fits into the other box and smaller reads" WILMIN TABLET DOSE O.5-3.OTb AT Once. and the outer box is written entirely in Chinese except for" MADE IN CHINA" The other bottle is the best it is sealed with a wax type substance and there are several Ghost Chinese calligraphy characters on both sides. I have had a bottle like this before and the painted words were done in gold too bad this one is worn off. We invite you to check the other bottle similar to this but it does not have any English words and a different type of top or any of our other Chinese. Asian bottle auctions. Priority shipping Tracking is included in ... morethe Shipping costs. Please check out the pictures closely as it is a very important part of the description. The value of these items is in the container and not in the contents 2. Although the bottles have not been opened any incidental contents are not intended for consumption(and it would probably make you sick) 3. These bottles are not available in any retail outlet. 4 The container value has a value that substantially exceeds retail price of the contents. 5. As the seller I will take steps to insure buyer of collectible container is of lawful age in buyers and sellers jurisdiction(be prepared to show me you are 21. Payment- We accept PayPal Shipping/Handling- We almost always ship USPS Priority mail but. Our schedules allow us to ship only twice a week-usually on Saturdays& Tuesdays. International bidders- Over seas*Please note* postage may be less expensive when sent overseas through First Class Air& Estimated Time of Arrival(ETA) of 10 to 30 days or longer. Depending on which country. We do highly recommend Priority International which has an E.T.A. of only 5 to 10 days and most important it can be tracked. All Bidders- We encourage lots of questions& please
Manual guillotine paper cutter/shear with stand Martin-Yale/Ideal/Triumph?
Here's an older paper cutter with no nameplate that I can find. It is missing the handle that actuates the guillotine cutter. And the small spinner knob on the table adjustment wheel, but is otherwise in good condition. Blade is sharp, and when cycled by hand cuts cleanly. Adjusters work smoothly. It will need a handle to be functional however. We can arrange freight shipping or local pickup. Please email for more information. Approximate shipping weight 120lbs Thanks for looking!
NPK S-4XB Concrete Cracker Crusher Pulverizer Rebar Shear Excavator Attachment
NPK cracker shear attachment for excavator/ Model: S-4X-B/ 360 degree rotation/ Main pin diameters: 70mm/ Stick width opening: approximately 7 7/8" Fits approximately 7 ton excavator/ This unit has not been tested. It appears to be complete but is sold in unknown condition/ Located in Lockport. NY(Buffalo/Niagara Falls Area) Call KARL@ 716)622-704. 24 Hours notice is needed before pick-up. Item must be paid for in full within 5 business days of auction/listing end. You have 45 Calendar days to pick up your item. If it is not picked up within 45 days. It will be resold and you will receive nothing. Not responsible for item while being stored. Sold as is. We have a forklift to load. I am not the original owner. I do not make any guarantees as to condition or what this will fit. SOLD AS IS. I can palletize this item for free. Flat rate ... moreshipping is business to business within the continental United States. You must have a business addess and a forklift to unload. Sales Tax will apply unless you have proof of exemption. Methods of payment accepted: Paypal($200 Maximum) Wire Transfer, Check(must clear before pick-up, no exceptions) sorry no credit cards. Check out our other items!
Shear Tech EN-5800E High-Speed Check Endorser MICR Encoder with Catch Tray
Shear Tech EN-5800E High-Speed Check Endorser MICR Encoder with Catch Tray. This unit powers on and was removed from a working environment. This item may need ink cartridges but does include the catch tray. Please for detailed information and specifications on this model from the official Shear Tech website. Please review the photos and the"What's Included" section to see everything included with this sale. The photos are of the actual item(s) you will receive. What's Included: 1 each Shear Tech EN-5800E Check Endorser 1 each Keyboard 1 each Catch Tray 1 each Power Cord Payment Terms: Payment must be received within 3 days. PayPal is our preferred method of payment. Please contact us if you wish to use a different payment type. 7% sales tax will apply to buyers within the state of Indiana. Shipping Terms: We sell and ship ... moreto the lower 48 states ONLY! EXCEPTIONS are items setup with eBay's Global Shipping Program. All items will ship via USPS or FEDEX at our discretion. A tracking number will be posted to eBay and sent to your PayPal email address once your item has shipped. Terms of Sale: Guaranteed as described with a 14-day return policy. This 14-day period begins on the date you receive the item. Launched from my store- Powered by
Uchida Yoko Power Paper Shear/Guillotine 18" triumph challenge
Here's a used. Excellent condition, japan-made power paper shear/guillotine by Uchida Yoko. This is a very high quality machine in every way. Beautifully constructed. As you see in the photos. The machine overall is in exceptional condition and while it is used, looks like it hasn't been used much at all. Was just excessed by the big local university Law school. Runs on standard 110V household current. Machine sits on its original base and is approximately 36" square. The machine has a throat of 18" wide by 3" daylight. So should chop up to about 750 sheets(ream and a half) at a time. Back gage opens to 18" Everything functions beautifully. It runs quietly and smoothly. The dual safety switches work properly and the keys are included. The blade is sharp as anything. The plastic blade stop is in great shape. Too. ... moreOn the right of the machine is a turn wheel lock for the fence. That was damaged in transit. So i replaced it. Also, I machined a nice handle for the fence crank handle, so that it locks when in use, and hinges down so it won't hit you in the n@ts as you walk by: Included with the machine is a second blade. The tag says VERY sharp. I found by empirical evidence that to be the truth: The machine also comes with a second plastic blade stop(UHMW plastic) And the tool set to change blades, as well as the original manual which tells you how to do it, parts break down and electrical schematic, too. This would be a great machine for you if you work with a lot of letter/legal and or ledger paper 11 x 17" B size paper. Just a super nice machine that you'll be pleased to have and use in your business. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal within 3 days of auction end. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are encouraged to leave feedback indicating that the transaction has been compl
Vintage Stanley Uni Shear Mighty Midget
Smooth.Vibration-free running condition.2000 rpm 1.8 amp motor.18 gauge(050" cutting.Nice cord with original spring cord restraint. It might need a small adjustment for what metal you need to cut.
Lenox Throatless Shear
This is a nice shear it is from a small 2 man shop and doesn't have a lot of hours of use. It has a 1hp 3 phase motor and can be used by hand. It has a 10 gage capacity. I would prefer you come pick it up but I will deliver within a 150 mile radius of Eugene.Or.for 30 cents per mile Posted with
Birmingham CP machine tool Nocher Foot Shear 0-5216-C 16 gage 52"
Closed down shop. Selling the last of our stuff in storage. Everything must go! Located in Canoga Park. Ca.
CATTLE BULL DEHORN DEHORNER & SHEEP SHEAR TOOL LIVESTOCK DEHORNING SHEARING
CATTLE BULL DEHORN DEHORNER& SHEEP SHEAR TOOL LIVESTOCK DEHORNING SHEARING HERE IS AN OLD USED TOOL FOR DEHORNING LIVESTOCK SUCH AS BULLS OR STEERS. IT DOES SHOW A LOT OF USE. IT IS 12 1/2 INCHES LONG. I HAVE ALSO INCLUDED AN OLD SHEEP SHEARING TOOL. THANKYOU FOR LOOKING!
Skid Steer Attachments Concrete Crusher and Metal Shear
Demolition Concrete Crusher and Metal Shear I bought this to work around the farm to cut up some old equipment and few trees. When I bought it I was told that it was in great shape and they took care of it. Well they did not. So I rebuilt the unit. I spent $2500.00 hundred dollars on new bushings and two sets of shear teeth with shims, Parker hydraulic lines, Painted it and about forty hours of my time. I made a video of it in use; and it is at www.youtu.be/xfjNhPfA-5o Concrete Crusher and Metal Shear on You Tube. I was surprised of how many people wanted to see it in use and had never seen one. I have completed what I needed to do now it needs a new home. Cash or Money Order. Bank Check. Breaker/ Shear Specs 360 degree mechanical head rotation Hard-faced surfaces in high wear areas Replaceable shear teeth with four cutting surfaces and shim-able ... moreMax Jaw Opening 16 inches Max Blade Opening 8 inches Max Cutting Force at 3.000 psi 167,520 Max Crushing Force at 3.000 psi 53,960 Max Material Cutting Capability 3x1 inches Overall Length 60 inches Approx. Weight 996 Machine Requirements Machine Weight Class 5.000-12,000 lbs. Oil flow Requirements 11.6-24.5 gpm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f1dc88968-0xf8-
MILWAUKEE 6852-20 6.8-Amp 18-GAUGE METAL SHEAR NICE NO RESERVE
This NO RESERVE AUCTION is for a MILWAUKEE 6852-20 6.8-Amp 18-GAUGE METAL SHEAR. This tool is in excellent working condition. It may of been used 1 time, but appears as pictured, with just some very light minor scratches. If you have any questions, email me. See the pictures for actual item up for auction here. Please check our feedback. Thousands of customers can't be wrong. Bid with confidence& remember this auction comes with a 14 day money back guarantee(shipping/insurance) The shipping/handling/insurance will be $15.95 for this item. Shipping cost posted is based on the lower 48 states. I sell only quality merchandise. This NO RESERVE Auction is starting at $.99 cents. NO ZERO FEEDBACK(0) BIDS ACCEPTED. NO EXCEPTIONS, GOOD LUCK! My Policies: Shipping based on the lower 48 states. All payments must be received within 10 days. ... moreU.S. sales only. Illinois residents and all items picked up in person are subject to a local 6.85% sales tax. Powered by
SHEAR THLEWTHWAITE NO 2 ROPER WHITNEY DIACRO PEXTO
THLEWTHWAITE NO. A IRON SHEAR GREAT CONDITION! LOOK IN MY STORE FOR MORE DI ACRO ITEMS AND PUNCHES. 732-642-8271
Gauer 20" Sheetmetal Safety Edger for use with metal Shear stock
Gauer Model 5h-20 sheetmetal safety edger used to removed the sharp edge from sheared stock. Inspection in my Aberdeen. NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
ENGRAVING METAL FOOT SHEAR Famco # 18-22 22" cuts upto 21" .062 Brass
Famco Metal Foot Shear Model No 18-22 21" Cutting range Blade cuts.062 Brass Perfect for Engravers STILL BE USED AS THIS AD IS RUNNING Perfect for Metal Fabricators or Hobbyists PICK UP ONLY M-F between 8:30am- 4:30 pm WE CAN HELP LOAD ONTO TRUCK OR VAN Pay PAL ONLY
Pneumatic Stainless Steel Tidland Class I Shear Slitter Knife Holder .25 RH
Pneumatic Stainless Steel Tidland Class I Shear Slitter Knife Holder.25 RH THIS IS A REFURBISHED KNIFE SLITTER. IN GOOD CONDITION. COMES WITH A SEALED, NEW BLADE. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# NA OVERALL DIMENSIONS: WIDTH: 24" LENGTH: 14" HEIGHT:5.5" WEIGHT: 30 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR ELECTRICAL SURPLUS(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S
Pneumatic Stainless Steel Tidland Class II Shear Slitter Knife Holder .5 LH
Refurbished Tidland Class II Shear Slitter Knife Holder(No Blade) 5 LH THIS IS A REFURBISHED KNIFE SLITTER. IN GOOD CONDITION. DOES NOT COMES WITH A BLADE. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# NA OVERALL DIMENSIONS: WIDTH: 24" LENGTH: 14" HEIGHT:5.5" WEIGHT: 30 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR ELECTRICAL SURPLUS(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRAN
TRIUMPH / IDEAL POWER PAPER CUTTER 21 INCH MODEL 5210 COMMERCIAL 110 VOLT SHEAR
This listing is for a Triumph 21" very commercial power paper cutter model 5210 in excellent condition. It comes with 2 blades. 2 cutting sticks, blade changing tools and manual. Chances are good that if you have stopped buy to look at this listing you have a pretty good idea of what you're looking at but if not. The Triumph cutter has been the standard of the print/copy shop. Mailroom industry for more than 50 years. Everyone starts out with a Triumph cutter and when the shop has a need to cut larger sheets, they normally buy a larger machine and hang on to the Triumph for smaller jobs and because these cutters are so dependable. It is the perfect choice for any mail room. Church or inter office situation with a need for a paper cutter. The operation is safe, straight forward and simple. It is very quiet and extremely accurate. ... moreThere is a lighted back guide display that can be seen on top of the cutter to let you know where the back guide is set. Overall footprint: 41" deep x 33" wide- Requires 1. 110 volt outlet. Anyone can use this cutter. This beautiful cutter will cut up to 21 inches wide and the back guide will come as close as a half of an inch. It is designed to cut a ream(500 sheets) of paper at once and will do just as good of a job on coated or bond paper. There are 2 safety systems with this cutter. The cutter will not cut with the safety shield up. Second- You need one hand on each cut button to operate the cutter. Let go of one of the buttons and the cutter will stop immediately and return to the top position. For a short video of this cutter in operation please click this link: For new internet discount pricing on a new 18" wide cutter(about 7.000.00) please click this link: http:www.cfsbinds.com/tr48secu18.html About us. With budgets as tight as the are these days a lot of folks are turning to Ebay. Ebay can be the best place in the world to get a great deal but only if you are dealing with a reputable seller. We are not equipment dealers. We’re not here to dump our trade-i
HI SHEAR CORP MODEL BG1750-252
NICE SHAPE
GENESIS SHEAR GDP1200 steel lower knife #3100674
G47/48 For sale is a new genuine Genesis#3100674 steel LOWER KNIFE. Fits GDP1200. At dealership costs $900. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs and/or questions. The picture is of one of the two steel lower knives. Thanks. Kate
GENESIS SHEAR GDP1200 concrete tip lower knife #3100675
G45/46 For sale is a new genuine Genesis#3100675 concrete tip LOWER KNIFE. Fits GDP1200. At dealership costs $950. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs and/or questions. The picture is of one of the two concrete tip lower knives. Thanks. Kate
GENESIS SHEAR concrete GDP1200 lower knife #3100041
G42/43/44 For sale is a new genuine Genesis#3100046 concrete LOWER KNIFE. Fits GDP1200. At dealership costs $510. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs and/or questions. The picture is of one of the three lower knives. Thanks. Kate
GENESIS SHEAR GDP1200 upper blade #3100696
G9/10 For sale is a new genuine Genesis#3100696 UPPER BLADE. Fits GDP1200. At dealership costs $389. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs. The picture is of one of the two blades. Thanks. Kate
GENESIS SHEAR GDP450 guide knife #3100704
G22 For sale is a new genuine Genesis#3100704 GUIDE KNIFE. Fits GDP450. At dealership costs $339. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs. Thanks. Kate
GENESIS SHEAR GDP1200 tip knife #3100655
G21 For sale is a new genuine Genesis#3100655 TIP KNIFE. Fits GDP1200. At dealership costs $678. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs. Thanks. Kate
GENESIS SHEAR GDP1200 tip knife #3100654
G20 For sale is a new genuine Genesis#3100654 TIP KNIFE. Fits GDP1200. At dealership costs $698. They have a little surface rust on them due to sitting in the garage. Email with any questions. I HAVE MANY NEW KNIFES FOR ALL GENESIS SHEARS, email with your needs. Thanks. Kate
Antique Primitive Sheep Shear Field Scissors – Vintage Barn Tool - Sheep - Wool
Antique Primitive Sheep Shear Scissors– Vintage Barn Tool Up for sale is a very nice old unmarked Antique Primitive Cast Iron or Steel Sheep Shears for cutting off sheep wool. Measures 9.75" long x 3" across the top 3" wide at the bottom. Great primitive farm tool with some surface rust and scratches for that aged patina to hang outdoors. In your barn or a themed home with like primitive tools. Still functions, but could use some sharpening if you plan on using them for this purpose. Great item if you shear your sheep out in the field. All Sales Final.
VINTAGE 6" HEAVY DUTY 16 GAUGE SHEAR CUTTER !!! CIRCA 1940-70 !!! AWESOME !!!
Up for auction is a Vintage 6" HEAVY DUTY 16 GUAGE SHEAR CUTTER! Super Nice! ALL ORIGINAL AND IN PERFECT WORKING CONDITION Blade has spotting but is very sharp with no nicks or chips. My guess is that it's circa 1940-1970. But it could be way older than that, I wish I knew. So if any of you knowledgeable Ebayers out there know. Drop me a message. It would be much appreciated. No makers mark that I could find. Weighs in at 36 lbs. and I'll have to make a wood box to ship it. but with some creative packaging. I can make it fit in a large flat rate box. Nice collector piece or very much useable! See the PIC.S for best description. Everything I sell is as i found it. AS IS. I never clean or repair any item. I prefer to leave that to you. I describe things and take photos to the best of my ability. But I'm no expert. Any questions ... moreyou have. Just email me.no problem. I only ship to the lower 48 of the good ol USA and the Global Shipping Program. Winner please pay within 3 days of auction end. If more time is needed. Just email me.no problem. Will combine shipping whenever possible. Just let me know if interested in multible items. THANK YOU and HAPPY BIDDING!
Roper Whitney Pexto 137L 16gage JUMP SHEAR - BACK GAUGE & FRONT SUPPORTS -DIACRO
Local pick up only Comes with front extensions and rear adjustable fence not shown in the pics. Local pick up only Posted with On Feb-08-13 at 14:28:26 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
WYSONG 1452 SHEAR 14 GAUGE X 52''
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05130190135 Manufacturer: WYSONG Description: WYSONG 1452 SHEAR 14 GAUGE X 52' Capacity: 14 GAUGE X 52' Model Number: 1452 Serial Number: P36561 Additional Information: FOOTSWITCH. CUTLER HAMMER SIZE 1 STARTER BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through ou
Wiss Industrial Tinners Snips Pro Sheet Metal Tin Shear
This listing is for 1 used Wiss Industrial Tinners Snips Pro Sheet Metal Tin Shear. I blacked out my name with a sharpie as shown in the pictures. Fast Shipping via Priority Mail. No Returns. USA and PayPal only. Thank you for looking. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f25d01319-0x104-
Ermak Hydraulic Shear Model CNC 38" x 13" 2008
Used Ermak Hydraulic Shear Model CN 3/8" x 13' Year 2008 General Specifications: Cutting Length: 161" Cutting Capacity: 3/8" Strokes: 11-17 SPM Holddowns: 18 Motor& Controls 30 HP Main Motor Cybelec Controller Model DNC 60GS Flush Table Top with T Slots Laser Cutting Line Blades for Cutting Stainless(In Lieu of Standard Blades) Auto Blade Gap Pneumatic Sheet Support System(Back) Auto Cutting Angle Auto Stroke Depth according to Material Thickness 120" Squaring Arm Manuals Note: We do not Take Paypal for Payment
Ermak Hydraulic Shear Model HGS 8' x 1/4"
USED ERMAK HYDRAULIC SHEAR MODEL HGS 8' X 1/4" General Specifications: Cutting Length: 102" Cutting Capacity: 1/4" Strokes: 20 SPM Holddowns: 13 Motor& Controls ELGO 9521 NC Controller Flush Table Top with T Slots Blades for Stainless Steel( In Lieu of the Standar Blades) Cutting Length Adj. for Shorter Sheet Cut for Reduced Cycle Time Finger Guards Foot Pedal Laser Cutting Line Front Operated Back Guage 120" Squaring Arm Two Support Arms Pneumatic Sheet Support System Back FOB Colorado Note: We do nto take Paypal for Payment
Milwaukee 6855-7-8 18 Gauge Shear
FEATURES Double insulated All ball and needle bearings ABrushes designed for easy replacement Aluminum gear housing AC-DC Paddle switch conveniently mounted for one hand operation High speed accurate cutting mechanism Simple blade adjustment- No shims Blade design eliminates jamming Leaves edges smooth- Burr free No adjustments for straight cuts- Curves Cuts close curves either right or left SPECIFICATIONS 3 amps 3600 Strokes Per Minute Capacity: Steel- 18Ga(0478" Stainless- 20Ga(0355" Volts: 120 Amps: 3.0 Minimum Radius: Left- 1/2" Right- 1" Length: 9-5/8" Weight: 4lbs, On Dec-17-12 at 18:35:25 PST. Seller added the following information: Shipping will be determined after final Bidding. Free applies to local pickup only.
5" Sheet Metal Shear Bench Mount Steel Aluminum Copper Hand Cutter
5"Sheet metal shear by the Simonsen Iron Works Sioux Rapids IA. This is a clean simple compact shear that works great. The piece of metal I cut with no problem is 18ga SEE PICS
Pexto Model 142H 16 Gauge Hydraulic Assist Sheet Metal Shear
Gold International Machinery Corporation | Pexto Model 142H 16 Gauge Hydraulic Assist Sheet Metal Shear Our Inventory Number: 8409-570 Technical Specifications: 230V/3PH/60HZ, Maximum shearing length: 42" Sheet metal capacity: 16 gauge mild steel, Overall dimensions: 53"w) x 37"d) x 43"h) Estimated weight: 850 lbs. Equipped With: Front supports, Back gauge, Hydraulic assist, This item is in very good condition! We will palletize. Cover, and load truck for $165. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range ... moreof technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your
6" x 6" x 3/8" Scotchman Hydraulic Ironworker No. 6509, Punch, 24" Shear (23508)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 23508. SCOTCHMAN HYDRAULIC IRONWORKER MODEL: 6509 SERIAL NUMBER: 3472M189 GENERAL SPECIFICATIONS Punch Station Capacity: 65 Ton Punch: 1-1/16 In 3/4" Throat Depth: 9" Flat Bar Shear: 24" 1" x 6" 3/4" x 8" 1/2" x 12" 3/16" x 24" Angle Shear. 90 Degrees: 6" x 6" x 3/8" 5" x 5" x 1/2" Angle Shear. Miter Angle 45 Degrees: 4" x 4" x 1/2" Strokes Per Minute. Light Material: 40 Max. Capacity: 12 EQUIPPED WITH 5 HP Motor Angle Shear Die Holder Complete With 2" Die Insert Electric Remote Foot Pedal Flat Bar Shear With 4-Way Reversible Blades Approximate Weight: 2500 Lbs. Shipping Dimensions: ... more60" x 27" x 66" Tall F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsi
1/2" x 12' Cincinnati Model 4H-12 "Century" Hydraulic Power Squaring Shear
Liberty Machinery Company You are looking at: Used- 1/2" x 12' Cincinnati Model 4H-12"Century" Hydraulic Power Squaring Shear* Serial No. 3C046 New- 1979 LMC#31675 SPECIFICATIONS: Capacity 1/2" Mild Steel Capacity 3/8" Stainless Steel Capacity 3/4" Aluminum Cut Length- Maximum 144" Knife Cross Section 1" X 4" Rake Angle- Inches/Foot 1/2" Strokes Per Minute- Full Length Cuts Approx. 7 Strokes Per Minute- 24" Cuts Approx. 20 Back Gage Range 48" Front Gage Distance 48" Distance Under Guards 1-1/16" Distance from Holddown to Knife Edge 1-5/8" Distance from Guard to Knife Edge 6" Electrical Requirements 460V/ 3 Phase/ 60Hz Approximate Weight 28.000 Lbs. EQUIPPED WITH: 48" Power Back Gage with Readout. Settable increment. +/ 1/64" Spring-Mounted Ball Transfers ... morein table Adjustable Stroke Length Hydraulic Holddowns Finger Guarding Shearing Light Guide*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may a
#M-3060 AMADA 10' x 1/4" Mechanical Power Squaring Shear '84
Preowned 10' x 1/4" AMADA Mechanical Power Squaring Shear. Model: M-3060, S/N: 3060289(New 1984) Maximum cutting length with side gauge Maximum cutting length without side gauge Maximum plate thickness(mild steel) Blade length Gap depth Rake angle Strokes per minute Back gauge movement range Back gauge speed 118.11" 123.62" 1/4" 133.07" 11.81" 1 degree 28 feet 60 0.39"39.37" 34.25 I.P.M. Equipped With Electro-magnetically actuated mechanical clutch with remote electric foot pedal and dual palm button controls Nine position. Numerically controlled, digitally displayed, motorized and programmable back gauge allowing for automatic selection of cutting width in inch or metric units. 118" Capacity right hand squaring arm with inch and metric scales and disappearing stop(2) Front support arms Four ... moreoperating modes: single stroke. Continuous, automatic and inching Manually adjusted blade clearance and blade height adjustment by turning the table positioning bolts on either end of the shear table Gap frame design T-slots built into shear bed Rear scrap chute(13) Independent hydraulic holddowns(1) Pair 4-edged blades Full length finger guard One shot lubrication system 1/2 H.P. back gauge motor 15 H.P. 3/60/230-460 volt drive motor with electrical controls Machine is wired for 230 volt operation. Approximate Weight: 18.520 Lbs. Approximate Dimensions(Without Squaring Arm) 169" L x 80" W x 69" High, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY) 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f29ece1e8-0xf5-
#AS-250-10 (GHE-630) STRIPPIT (PROMECAM) 10' x 1/4" Hydraulic Shear '86
Preowned 10' x 1/4" STRIPPIT(PROMECAM) Hydraulic Power Squaring Shear. Model: AS250-10(GHE-630) S/N: 183(New 1986) Maximum cutting length Maximum thickness. Mild steel Maximum stroke Maximum/Minimum cutting angle 120" 1/4" 5-1/2" 40'2° Equipped With 39.4" Capacity front operated power back gauge with manual fine adjustment dial 5' Left-hand squaring arm with adjustable stop Remote electric foot pedal control Selector switch for Step to Step/Auto modes of operation Adustable OMRON timer for selection of stroke length Blade clearance hand levers at rear of machine for adjustment of sheet thickness Adjustable rake angle(6) Table bars to facilitate the lateral positioning of the sheets Continuous stroke counter Finger guard(1) Extra set of blades in addition to blades on machine 3/4 H.P. back gauge motor ... more7-1/2 H.P. hydraulic pump motor Machine is wired for 220 volt operation. Approximate Weight: 12.000 Lbs. Approximate Dimensions(Less Support Arm) 149" L-R x 77" F-B x 74" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
THE CLEVELAND PUNCH AND SHEAR WORKS COMPANY.....1901 STOCK CERTIFICATE
Common Stock Certificate Number 149.Dated July 26.1901.For 10 shares.In favor of John F. Doolittle.Embossed corporate seal lower left.Hand signed by Company President& another corporate officer.Attractive gray border.entire certificate has a light, lime green tinge.Very good vignette featuring a machine tool.the certificate is in good condition(1A5314895)
John Deere A B G power trol hydraulic remote plug shear clip type with covers
John Deere A B G power trol hydraulic remote plugs shear clip type with covers. The covers have rust. The plugs need to be cleaned inside. There is some surface rust on the plugs but it should not hurt anything. Please note that these use the clip and will not work on some A B G and all 50 60 and 70s. We are parting out several 60s. 620s, 630s, 70s, 720s, and 730s, and will be listing some parts off of them as time allows. We also have a few parts for A, B, D, G, H, 50, 520, 530, 80, 820, 830. If you need something, just email us and we will put it on Ebay. We try our best to describe EVERY part accurately. We will not describe something as"rebuilt" or"remanufactured" just because something has a couple new or shiny parts. If we describe it as rebuilt, we will have done it, had it done, or be sure it was actually rebuilt. ... moreWe try our best to have all parts washed and not grease covered when we ship them but sometimes some do not get bare metal clean before shipment. The parts we sell are usable and in nice shape unless otherwise noted in the description. About us: We repair. Restore, and use John Deere two cylinder and new generation tractors. We also have dealerships for new parts, please email us if you need anything. We take pride in what we sell, whether it is a part or a tractor. Thank you for you time. Return policy: We ask to be contacted within 2 weeks after you receive the part or tractor. After that, the part or tractor is yours. International shipping: We will ship to most countries. Please email for quote.
Di Acro 12" X 16ga Hand Operated Shear Di-acro
Di-Acro 12" x 16ga Hand Operated Shear Please see on picture. What you are bidding on Made in usa. Specifications: Max Cap. Mild Steel: 16ga Max Shearing Width: 12" Range of Back Gauge: 12" Machine Shipping Weight: 178 lbs. THE ITEMS ARE GOOD WORKING CONDITIONS. SELLING AS IS NO WARRANTY. Shipping terms* We do not ship to APO/FPO addresses* We currently ship via USPS and FedEx. Tracking numbers will automatically provide in shipment notification email. We only ship the item to the PayPal Verified address that is sent to us at the time of checkout. Please verify the correct shipping address in your PayPal account before making your payment. If we ship your item to an old or invalid address and you are not able to locate the item. We are not responsible for shipping a replacement. Many of our items can be shipped 2nd Day and ... moreOvernight. Overnight charge is always double of the second day charge. Regardless of what the listing states. Only USA shipping. No international shipping at this time. PAYMENT TERMS  You will receive a checkout email once you placed the order. Please read the instructions carefully to complete the payment process.  Payment is required within 5 days of auction close. If we do not received payment within 7 days. The item will be re-listed.  We accept payment via PayPal accounts. RETURNS Please read our return policy and make sure fully understand it before you buy. If you have any question or concern. Please feel free contact with us. We also provide 14-30 day return service from the purchasing date. If buyer returning items for a refund 10-20% restock fee will be deducted from original price. The buyer is responsible for return shipping costs No refunds will be given on NEW items that have been opened or used. IF Items returned that are physically abused or damaged will not be accepted. ALL ITEMS ARE FULLY INSURED. IF BUYER RECEIVES DAMAGE ITEMS, REFUND WILL BE ISSUED BY THE SHIPPING COMPANY. Normal 0 false false false EN-US X-NONE X-NONE jy.RcmdId ViewItemDescV4,RlogId p4%60b
Front Support Arms for a Small Metal Shear
Front Support Arms for a Small Metal Shear, Click to View Image Album Click to View Image Album Click to View Image Album These have been cleaned and painted on the back side and will need a gentle sanding on the top side. After installation. They are 26" long, and have mounting holes 3-1/4" on center and 1" down from the top surface. Manufacturer unknown. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to ... morea stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the sh
DEWALT CEMENT SHEAR, D28605, 1/2" TYPE 1 SERIES, LIGHTLY USED "WORKS GOOD!!"
TODAY I AM AUCTIONING OFF A DEWALT D28605 1/2" TYPE 1 SERIES CEMENT SHEAR. THIS TOOL HAS BEEN LIGHTLY USED AND IS IN EXCELLENT CONDITION. IT WORKS GREAT TOO! THE NUMBER ON THE BACK IS 200731-49. IT IS 120 VOLTS. 60 HZ, 6.6 AMPS. MADE IN MEXICO. THERE IS A SMALL"R" BRANDED IN THE RIGHT SIDE OF TOOL( AS SHOWN IN PIC) FROM BEING PREVIOUSLY OWNED. WOULD BE A GREAT DEAL FOR ANYONE LOOKING FOR A CEMENT SHEAR. HAPPY BIDDING! EMAIL ME WITH ANY QUESTIONS. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f2c0c292f-0xf0-
MA A UNI HYDRO 55 TON IRON WORKER IRONWORKER 220 VOLS 1 PH SHEAR PUNCH HYDRAULIC
BUY IT NOW NO WAITING. UNI HYDRO III 55 TON IRONWORKER. IN GOOD WORKING CONDITION. 220 VOLTS SINGLE PHASE. CAN BE USED AT YOUR HOUSE. VERY COMPACT DESIGN OVER ALL DIMENSIONS 70" HIGH 39 WIDE AND 38 DEEP. NO CRACKS. WAS WELL LUBED. FREE LOADING $50.00 FEE FOR STRAPPING TO A PALLET. QUESTIONS CALL JUSTIN 619-253-6499. YOU ONLY GET WHAT IS PICTURED AND DESCRIBED IN AD AND NOTHING ELSE. IF I CAN I TEST EVERYTHING BEFORE SHIPPING TO MAKE SURE IT WORKS BEFORE YOU GET IT. IF IT DOESN'T WORK WHEN YOU GET IT. IT IS YOUR RESPONSIBILITY TO REPORT IT TO THE SHIPPING COMPANY AND I WILL NOT BE HELD RESPONSIBLE IF YOU DO NOT. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING ... moreOR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS
Pexto Power Shear PH-37B, 3' Bed
Pexto 37" 3 phase shear. Model PH37B. S/N 156-9-81. Good condition. Capacity: 16 gauge soft steel. Square D heavy duty foot control. Hydraulic fluid looks good. Continuous cycle and single cycle switch. Dimensions: 51"wide x 42"high x 26"deep. Weight approx. 1000 lbs. Can put on pallet for reasonable fee. Super heavy and you'll have to make arrangements to ship and load. YOU pay for shipping. Located in Campbell. CA 95008. Let me know if you have any questions.
WYSONG 124" X 3 3/4" SHEAR BLADES USED ***ONTARIO, CALIF.***
WYSONG 124" SHEAR BLADES* USED BUT IN GOOD WORKING CONDITION* ONE SIDE GOOD. ONE SIDE BAD, STILL USABLE* 124" OVERALL LENGTH* 3 3/4" HIGH* 16 MOUNTING HOLES. 8" FROM HOLE TO HOLE(CENTER TO CENTER) WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 7 DAYS OF PURCHASE! CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY RETURN SHIPPING MUST BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS TO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? FEEL FREE TO CALL ROBERT(626) 945-6018 OR EMAIL BELTRANEBAY@GMAIL.COM* PLEASE VISIT OUR STORE OFTEN FOR MORE INDUSTRIAL ITEMS. MORE ARRIVING DAILY, ... moreTHANK YOU! by adding my eBay Store to your Favorites! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
30 TON PRESSSHEAR PS-30 PRESS SHEAR MACHINE SHOP. USA
Please read before bidding: TO AVOID SHIPPING DELAYS. PLEASE PROVIDE NAME OF BUSINESS AND PHONE NUMBER WITH PAYMENT. THANK YOU! IF PAYING WITH PAYPAL. I WILL ONLY SHIP TO THE ADDRESS THEY PROVIDE. I accept all forms of paymentand can accept credit cards through paypal. Please have patience with questions and shipping quotes. I have just picked up a few items from a bankrupt welding shop. Please click on view sellers other items to see what I have. Works great and guaranteed in proper working condition. Model PS 30-377. 2 HP, 208 volts, and 1 phase. 107 long, 43 wide and 76 high. Comes with manual and custom bench on casters. As you can see it has been outside. If you have immediate questions(602) 908-3006. Check my 100% positive feedback and bid with confidence. LOCAL PICK UP IS FREE! I HAVE A FORKLIFT. Buyer pays actual shipping and $100.00 ... morefor palletizing. I get a 81% discount with my frieght company. Payment required within 7 days of auction close. A check may require a 10 day hold. What you see is what you get. There isn't any hidden accessories.
Roper Whitney Jensen Diacro 60 X 75 Rectangle Shear Punch Die Set "Resharpened"
Roper Whitney. Diacro, Whitney Jensen.60" X.75" Rectangle Shape Centerpoint Hole Punch& Die Set 1" Punch Shank. 2-1/8" Diameter Die For Single Station Punches in Excellent Condition Same Day Shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
NEW VINTAGE 1988 APPLAUSE KITTY CAT DUSTY SHEAR BLUE LACE DRESS GRAY PLUSH RARE
NEW VINTAGE 1988 APPLAUSE KITTY CAT DUSTY SHEAR BLUE LACE DRESS GRAY PLUSH RARE nucite" You are bidding on a 10" NEW VINTAGE 1988 APPLAUSE KITTY CAT DUSTY SHEAR BLUE LACE DRESS GRAY PLUSH RARE. It is in Excellent Condition. Its fabric is a beautiful color. Soft, plush, and without any holes or stains. It will make a great addition to your collection, or as a gift. If you have any questions please email me and I will get back to you ASAP. MORE PICTURES BELOW! nucite Payment& Feedback Shipping I accept paypal as my preferred form of payment. I will leave positive feedback for you and would appreciate the same. WE GREATLY VALUE OUR RATINGS SO PLEASE LEAVE ALL 5'S. CONTACT US IF YOU HAVE ANY ISSUES BEFORE LEAVING FEEDBACK. I will be listing many new items soon. So please check back soon. If you have any questions I will try ... moreto answer them ASAP. Thank you. We mail out 24 hours after your payment clears. If you need your item sooner please email me so we can make arrangements if possible. If you need to expedite for overnight delivery. Or weekend delivery please email me. We will always do our best to accommodate your requests, and will adjust the shipping and handling charges accordingly. FREE SHIPPING ON ORDERS OVER $50! nucite Image hosting and auction templates from www.nucite.com. Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Dustyn Shear Christmas DOLLY MOUSE 12" Soft Doll Plush by Applause 1989
| | Vintage Dustyn Shear Christmas DOLLY MOUSE 12" Soft Doll Plush by Applause 1989, Click to View Image Album Vintage Christmas DOLLY MOUSE soft sculpture doll plush by Applause. Designed by Dustyn Shear. Dated 1989. Measures approx 12" tall. Posed with one paw on her cheek. Can stand upright on her own. Very good pre-owned condition; may be some light dust. Very cute! Buyer pays shipping 4.95. nb0) XMS-79*SHIPPING SPECIAL* Combine MULTIPLE purchases and pay only $1.50 for each additional item(highest shipping is used for the first calculation) NOTE: Because of the weight of games. If more than one game is purchased the cost will be $2.00 for each additional game. If paying with Paypal. Only ONE payment must be sent to qualify for this special. Please request or wait for a COMBINED invoice! Since this is a reduced shipping rate. ... moreI reserve the right be send via PARCEL POST or FedEx, even though original shipping costs might have been stated as Priority. If you want Priority shipping, this discounted rate MAY NOT apply, but I can still combine costs that may or may not save you money. THE SMALL PRINT*Books may not be a combined item to qualify. But do qualify if only books or videos are purchased*Special is not valid for International buyers or those outside the continguous 48 states. I prefer payment within 7 days of auction end. If additional time is needed. Please contact me prior to bidding or purchasing to see if I am willing to accept the timeline. Per eBay guidelines, CONTACT/COMMUNICATION must be made by BOTH the buyer and the seller within THREE days of auction end or purchase. If I receive no response from the buyer, I will start the Unpaid Item Process on Day 4. Note: With Buy-It-Now or Fixed Priced purchases, I prefer payment within 24-48 hours(however I will waive this if you intend to purchase multiple items, but you must email me and tell me that you are looking at additional items as I am NOT a mind reader) HANDLING
Tennsmith 52" Shear Blades Pexto Niagara DiAcro Famco Fabrication Metal Working
Up for bid is a set of shear blades for a 52" Tennsmith. I am fairly certain they are for a Tennsmith. But was told that they could fit other 52" shears. They are freshly reground and ready to install. Please make sure these are what you need before bidding(exact measurements, hole spacing) Please ask any questions you might have. I mainly use Fed Ex even though the calculator shows it as UPS. The price will remain the same. I get far better service from them than UPS. Check out my! The measurements for the top blade are: 53 3/8" x 1 13/16" x 7/16" The running dimensions for the hole spacing are: 1 13/16" 8 1/16" 14 5/16" 20 9/16" 26 13/16" 33 1/16" 39 1/16" 45 9/16" 51 13/16. The measurements for the bottom blade are: 53 1/4" x 1 15/16" x 7/16" The running dimensions ... morefor the hole spacing are: 2 1/8" 8 1/8" 15 1/8" 22 5/8" 30 5/8" 38 1/8" 45 1/8" 51 1/8" The mounting hole size is 3/8-16. And the holes are 13/16" from one edge of the blade, not in the center. The hole spacing dimensions are approximate.
New Hermes Plastic Shear
Used. New Hermes Plastic Shear for cutting plastic laminate tag and sign material. Excellent working order.
JOHN DEERE #P66990 SHEAR PIN/DIPERSTICK ARM/EXCAVTOR/ APPLICATIONS BELOW.
Thank you for viewing my listing. I am offering this John Deere# P66990 Shear pin for the diperstick arm onp66990 sells for $243.33 shear pin for dipperstick arm it fits; 490d.495d,490e,110,120,120c,135c excavator and 493d feller buncher. I have listed thr part as used but I believe that it is new. It shows some discoloration but has bo visible wear or signs of use.PLEASE VIEW ALL PICTURES) Shipping and Payment Information. We accept Paypal only and payment is required within 3 days of purchase. Items ship within 2 days of receiving full payment. I offer a 100% money-back refund policy within 14 days. If you are not completely satisfied. You may return the item for a full refund. However, please contact me with any problems or concerns before leaving negative feedback as I will do my best to resolve any issue. BUYER RESPONSIBLE FOR ALL RETURN ... moreSHIPPING COSTS. THANKS AND GOD BLESS
Model SS402 Snapper Fiber Cement Shear Sioux pneumatic
This item is lightly used but in excellent working condition. I am also including two new sets of blades one for straight cuts and one for cutting circles. Model SS402. Fiber Cement Shear. Sioux pneumatic. Air volume requirement: 10cfm. Cuts fiber cement siding up to 5/16" thick. Smooth. Fast, and dust-free operation. Reversible blades machined from solid tool steel. Average blade cost is $3 per house.
15H HILL-ACME HYDRAULIC ALLIGATOR SHEAR - #26826
Quote# 26826. Quote# 26826. 15H HILL-ACME HYDRAULIC ALLIGATOR SHEAR Serial No. 8115-364-02. Model 15H EQUIPPED WITH: Adjustable Stroke For Faster Cutting Cycle Self Contained Hydraulics& Electrics CATALOGUE SPECIFICATIONS: Round Bar Capacity. 2-1/2" Plate Capacity. 15" x 1/2" Rebar Capacity. Three Bars. 11 Knife Length. 15" Knife Width. 4" Knife Thickness. 1-1/4" Knife Opening. Maximum. 6-3/4" Height Of Cutting Edge. 30" Strokes Per Minute. Full Cut. 12 SPM Strokes Per Minute At 3" 22 SPM Motor Horsepower. 20 HP Electrical System. 230/3/60 Floor Space Required. L x W. 6'4" x 2'10" Weight. Approximate. 6300 LBS NOTE: Machine Appears To Be In Good Condition With A Replacement Price Of Over $45.000.00 PRICE: F.O.B. OUR WAREHOUSE. $19.500.00. All lmachines/equipment subject to ... moreprior sell.