|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Bezugsprofil II. Gewicht 1,7kg. Restnutzungsbreite 12mm.
Buy It Now
$13.55 Shipping Condition: Used Location: Prescott, United States Almost all of my pieces are handmade, so they will not be perfect. If an item is improperly described it would not be intentional. 2.7" Dia (69mm) Bottom ... moreTapered to 2" on top. 46" (11.88mm).
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Zustand: - gebraucht -. Gewicht 1,6kg. Restnutzungsbreite 12mm.
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Ø131x42xØ1 1/4". Gewicht 1,6kg. Restnutzungsbreite 10mm.
Buy It Now
Free Shipping Condition: New Location: Eagle River, United States We also have 4" Starter sets and individual fittings available as well as hard mount ports for custom tools and places that don't have an existing port. ... moreThese ports have been designed to be super strong and ready for years of hard work keeping your work areas and lungs nice and dust free!
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Ø95x19xØ1 1/4". Gewicht 550g. Restnutzungsbreite 12mm.
Buy It Now
$10.70 Shipping Condition: Used Location: Lebec, United States
Buy It Now
$10.60 Shipping Condition: New – Open box Location: Oxford, United States One, (1), Delta shaper 1/2" spindle made from an import generic part and machined to fit the Delta USA made Heavy Duty shapers. -Includes draw bar, draw ... morebar nut, 1" spindle machined to fit Delta Heavy Duty USA shapers.
Buy It Now
$12.95 Shipping Condition: Used Location: Orlando, United States 1 1/4” x 3 3/4” Shaft for holding Shaper Cutters for Sharpening. OAL 7 1/2”Where item is chucked up, that dimension is 3/4” dia. X 3” longItem might show ... moreblemishes on steel. Shipped with USPS Priority Mail.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States LIKE NEW. LESS THAN 20 HOURS USE ON THIS MACHINE* ADDITIONAL ITEMS with Shaper! 2- Amana 54117 15 degree traditional raised panel 3-3/8 inch diameter ... morerouter bit. Original price $100.00. 1- Amana 55370 reversible stile& rail traditional router bit. Original price $110.00. 1- Woodstock 3" moulding cutterhead 1" bore. Original price $90.00. 1- Woodstock D1700 2" moulding cutterhead. Original price $80.00. Features of Shaper: Spindle sizes: 3/4" 1 and 1-1/4" x 7-1/2" Spindle travel: 3-1/4" Spindle capacity: 5" 1-1/4" spindle) Table counterbore: 7" x 5/8" deep. Maximum cutter diameter: 5-7/8" Spindle speeds: 3600. 5100, 8000, and 10000 RPM. Table size: 35-1/2"W x 28"D. Overall dimensions: 28"D x 35-1/2"W x 42"H. Heavy-duty. Precision-ground cast iron table and fence assembly. One-piece cabinet style stand. Epoxy paint. Independent. Micro-adjustable fence with 4" dust port. Shielded and permanently lubricated ball bearings. 5 H.P. totally enclosed fan cooled. 220V, single phase, 14 Amp motor. Wight approx. 700lbs.
Buy It Now
Free Shipping Condition: New Location: Nashville, United States PROFESSIONAL EAGLE PARTS, INC.
Buy It Now
Free Shipping Condition: Used Location: Laurel, United States
$15.55 Shipping Condition: Used Location: Prairie Du Chien, United States Selling as used but was purchased for the wrong machine so was never installed. This fits the 1 3/4hp shapers . Please ask any questions before auction ... moreends
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Bezugsprofil II. Ø 135 x 40 x Ø 1 1/4". Restnutzungsbreite 9mm.
Buy It Now
$19.00 Shipping Condition: New – Open box Location: Bedford, United States Up for sale are thirty four 9/32 ejector pins. They have never been used. The buy it now price is for all 34 pins. Check out my other listings for more ... moremachinist items. I also have a mountain of other ejector pins that are not DME and are not part of this listing. Please let me know if you might be interested in them.
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Ø112x43xØ1 1/4". Bezugsprofil II. Restnutzungsbreite 10mm. 4mm abschleifen bevor Nutzbar.
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Ø114x43xØ1 1/4". Bezugsprofil II. Restnutzungsbreite 13mm.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G0608X 7-1/2 HP 3-Phase Tilting Arbor Shaper. The G0608X is equipped with a 7-1/2 HP motor and powers the spindle to 3900, 5000, 7200, and 9400 RPM speeds. ... more(Consumables are not covered by the warranty.).
Buy It Now
$31.47 Shipping Condition: Used Location: Westmead, Australia For sales is one piece England made good working condition HSS gear shaper cutter.
Buy It Now
$48.65 Shipping Condition: Used Location: Millersburg, United States Lift Tables. These heads weigh over 5lb each. Country of Manufacture N/A. It is neither inferred or implied that any item sold by Arrow Industrial is ... morea product authorized or in any way connected with any manufacturers displayed on our pages.
Buy It Now
$8.95 Shipping Condition: Used Location: Highland, United States Was Told these were for crimping lines or pipe. The Maker initial is either M or W.
Buy It Now
$23.95 Shipping Condition: Used Location: Van Buren, United States
Buy It Now
$29.25 Shipping Condition: Used Location: Gainesville, United States This is a Delta Rockwell Homecraft wood shaper router fence SF1. SF2. 25 1/4" long 8 1/4" deep 3"thick. This is a great midcentury router ... morefence for a Delta Rockwell router. ready to use some dings. Surface rust but looks good!
Buy It Now
$10.75 Shipping Condition: New Location: Smithville, United States shaper tools 5mm T-slot 8mm shank 5mm cut height
Buy It Now
Free Shipping Condition: New Location: East Brunswick, United States English Wheel Shaping Benchtop. Capacity: 16 Gauge Mild Steel, Aluminum, Copper. - The design is simple, with few moving parts. The base takes the form ... moreof a large "C," and is usually made of fabricated steel.
Buy It Now
$34.75 Shipping Condition: Used Location: Milwaukee, United States Ount SR 275. - Motor Mount is in great condition.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States W1702 3 HP Shaper W1702 Description: This full capacity 3 HP Shaper will handle the smallest profile cutters all the way up to the largest panel cutters ... morewith its three spindle sizes. 3" spindle travel and 5-1/2" maximum spindle opening. Two reversible speeds also provide the greatest flexibility for arranging cutters of all sizes. So, no matter what the shaping application is, whether it's simple edge profiling or making door stiles, rails and panels, this is the right machine for the job. Specifications: Motor: 3 HP. 220V, single-phase with reversing switch, Large precision ground cast iron table, Table size: 30-1/2" deep x 28-1/4" wide, Spindles: 1/2" 3/4" and 1" Included) Spindle travel: 3" Spindle speeds: 7.000& 10,000 RPM, Spindle openings: 1-3/8" 2-3/4" 4" 5-1/2" Floor-to-table height is 34" Removable table inserts provide work support close to the cutter, Magnetic switch with thermal overload protector, Large handwheel elevates the spindle for precise control and spindle lock knob ensures consistent results, Heavy cast iron. Independently adjustable split fence allows full edge profiling, Starting pins allow irregular shaping, Interchangeable spindles are easily installed or removed, Shielded and lubricated ball bearings, Built-in 3" dust port, Powder coated paint, Approx. shipping weight: 353 lbs. This item cannot be shipped to the following states: Louisiana/Mississippi/Tennessee/Maryland/Connecticut/Rhode Island/Massachusetts. If you reside in one of these states and are close to another state that we are able to ship to. Then we can arrange a pickup at your nearest shipping terminal. Normal 0 false false false false EN-US X-NONE X-NONE QUESTIONS? 800-570-4500 Rayco Industrial Supply has been in the industrial tool and equipment business for over 40 years. Our 100% Feedback rating is a reflection of how we do business. Below you will find information pertaining to your purchase and any questions you may have. Payment Policy: I
Buy It Now
$12.90 Shipping Condition: Used Location: Superior, United States Delta Rockwell Light Duty Shaper Spindle Rod Lock Assembly 40-110. Condition is used. Shipped with FedEx. Dirty, dusty, rusty, shows normal signs of wear.
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Ø114x45xØ1 1/4". Bezugsprofil II. Restnutzungsbreite 15mm.
Buy It Now
$9.00 Shipping Condition: New Location: Chino, United States ❖ Anvil Size: 1", 2", 3". ❖ Material: Iron. Your satis faction is our ultimate goal. ❖ Speed: 875-1350rpm. ❖ Gross Weight: 22kg. ❖ Color: Blue+Black.
Buy It Now
Free Shipping Condition: New Location: East Brunswick, United States English Wheel Shaping Benchtop. Capacity: 16 Gauge Mild Steel, Aluminum, Copper. - Machine provides outstanding performance on small jobs like motorcycle ... moretanks, tank covers, seat cowls and aircraft fillets.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States Smoothly feed every workpiece with this variable-speed power feeder. The power feeder mounts easily to your shaper or table saw and can be removed just ... moreas easily. Feed speeds: Variable, 3-35 FPM and 8-90 FPM.
Buy It Now
$5.50 Shipping Condition: Used Location: Dennis, United States Delta Rockwell Homecraft Shaper Locking Knob Part for Ring Guard 43-817
Buy It Now
Free Shipping Condition: Used Location: Golden Valley, United States
Buy It Now
Free Shipping Condition: Used Location: Golden Valley, United States Used in Working Condition.
Buy It Now
$16.25 Shipping Condition: Used Location: Madison, United States I have no idea what particular machine they fit.
Buy It Now
Condition: Used Location: Pawtucket, United States From about 1854 to 1860 he collaborated with George H Makins(assayer to the Bank of England) to produce a "Improved Assay Balance". OERTLING fine British ... morebalances from 1847 to 1996. Circa 1860. We will load your truck from our adjustable loading dock (not crated).
Buy It Now
$10.40 Shipping Condition: Used Location: Cadiz, United States High Speed Steel. 1 USED - Excellent Condition.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States It will help you to operate precisely and be your right-hand assistant for machining slots for milling cutters, cutting teeth for gears, curved milling ... moreslots, or drilling a bolt-hole circle around the circumference of a part.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This punch former is made of high-quality Sks3 and is very strong and durable. It will help you to operate precisely and be your right-hand ... moreassistant for machining slots for milling cutters, cutting teeth for gears, curved milling slots, or drilling a bolt-hole circle around the circumference of a part. Key Features Vertical and Horizontal Design: It has both vertical and horizontal functions. When the vertical position of the table is used with the tail section, it is possible to perform circumferential cutting, indexing drilling, milling and more complex work. Durable Casting Material: High hardness Sks3 has good casting characteristics, such as milling vise, vibration reduction performance and high heat resistance, so it is very durable. High Precision: The pun.
Buy It Now
Free Shipping Condition: Used Location: Laurel, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Oak Lawn, United States Vintage Rockwell Shaper Cutter Set #35-241.
Buy It Now
Free Shipping Condition: New Location: Glendora, United States PepeLube (#307.50). The New JRM2 design takes up less bench space than the popular first version. The second compact version of the Jump Ring Maker places ... morethe 20 mandrels vertical on the base, rather than laying down on the larger base.
Buy It Now
Condition: Used Location: Pawtucket, United States Gold International Machinery Corporation | STAMPING PRESS TOOL& DIE SET TO MAKE SMALL BLOB- Jewelry Pendant Our Inventory Number: 1949-390 THE DIE ... moreSET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Technical Specifications: SPECIFICATIONS AS PER PHOTOS, PITCH: 575" DIE SET SIZE: 9" X 8" WEIGHT: 30 LBS. This can be shipped via UPS Ground. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions. Phone(M-F 9am-5pm EST) 1-800-619-GOLD(4653) Please E-Mail David Gold anytime at. Please note that freights costs are determined
Buy It Now
$13.00 Shipping Condition: Used Location: Georgetown, United States Molder Insert - good condition. Dado Insert - good condition.
Buy It Now
$14.60 Shipping Condition: Used Location: Dekalb, United States Good condition, bearing is sticky. If bearing needs replacing the bearing # is 204PP and is readily available. This is of course incomplete. We do have ... moreseveral complete ones listed if you need one.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States Free shipping to the lower 48 United States
Buy It Now
$349.95 Shipping Condition: Used Location: Wolcottville, United States Tested and works as it should. No maker tag found Area marked on filter 300 Sq. ft of filter surface area 2 hand filter shakers .
Buy It Now
Free Shipping Condition: Used Location: Wilmington, United States Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States JWS-35X5-1 Industrial Shaper 5HP, 1Ph 708326. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the ... moreUnited States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET tools.
Buy It Now
Free Shipping Condition: New – Open box Location: Bennet, United States Item never used.
Buy It Now
Free Shipping Condition: New – Open box Location: Oak Lawn, United States Vintage Rockwell Shaper Cutter Set #35-221.
Buy It Now
Condition: Used Location: Edina, United States LED LIGHT SIGN*Now we're making a special offer to customize your own design sign.Don't hesitate to contact me, if you interested in. Product ... moredetails: One brand NEW LED light sign Approximate size: 300mm x 220mm(12" inch by 8 3/4" inch) including the top aluminium cover part) Engraved by best Clear Acrylic Plastic We provide a 2 pin plug(US standard) Provide 220/ 110 voltage*US 2 pin plug: USA. CA, Brazil or other countries*AU adaptor: Australia*EU adaptor: UK. France, European Saves up to 88% more energy than traditional light signs No on/ off button. Item light up once you plug-in*If you want to switch on/ off the sign.We prefer you to pay the extra has a remote We have 7 color of each sign. If you want to choose another color, you can contact me to change color before you paid. Advertise Image is for reference only. The real object should be considered as final. Color of the products may have lightly different from individual computer monitor. If you can't accept this little different. Please don't bid. Thank You. PLEASE NOTE THAT WE TOOK THE PHOTO IN THE DARK ROOM. 7 C o l o r s are available If you want to change the color. Please feel free to contact us. No extra service fee will be charged Remote Control Function: Optional) Extra USD10 for each sign have On/ Off Button Can change the color as you like(7 colors) Slow Motion Flash Fast Motion Flash*If interested in. Please kindly contact me for more details. We also welcome customize your own image sign Shipment Lead Time: Shipment method: By Register Airmail(With Tracking no. Process& Packing time: 3 BUSSINESS DAYS once confirm payment Normal Worldwide Delivery lead time: 14-21 business days(Monday to Friday.Exclude holidays and weekends) parcel maybe delay. In the high peak period, Please kindly few more time for arrive* We are ship from Hong Kong in directly Payment: Paypal ONLY Need to pay within 5 days(unpaid strike will be consider for non-paid case) If ideal buy more than one. Please await a combine invoice
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States A feeder with the power and speed options you need for non-stop workpiece processing. The power feeder mounts easily to your shaper or table saw and can ... morebe removed just as easily. Feed speeds: Variable, 3–35 FPM and 8–90 FPM.
Buy It Now
$12.00 Shipping Condition: Used Location: Collegeville, United States Crossfeed nut for the table. In good shape. Please look at the pictures carefully to judge actual condition. Please ask any a questions you may have prior ... moreto purchasing. Please look at my other auctions, I have multiple machinist items and vises available.Shipping to continental US only (lower 48). Item will be shipped within 3 days of payment. No returns.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States H2879Z 5-7/8" Spiral Cutterhead. The H2879Z 5-7/8" Spiral Cutterhead has nine spirals which leave in an incredible finish! (Consumables are not covered ... moreby the warranty.). Swap out your old cutterhead and be amazed!
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 43-990. This is an arbor used on the radial arm saws to mount 1/2" bore shaper cutters.
Buy It Now
$6.80 Shipping Condition: New – Open box Location: Granville, United States Came in a dust collector accessory kit from Harbor Freight. I didn’t need these hose connectors. Never used and I’m selling as new (open box). They are ... moremade of ABS (plastic).From Harbor Freight:Here's everything you need to connect your 4 in. dust collector to your shop equipment. 6 in. jointer hoods fit most jointers and can be adapted for band saws, sanders, router tables, and shapersSee pics, send me a message if you have any questions.
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Ø114x21xØ1 1/4". Bezugsprofil III. Gewicht 900g. Restnutzungsbreite 17mm.
Buy It Now
$69.36 Shipping Condition: Gebraucht Location: Germany Bezugsprofil II. Gewicht 1,3kg. Restnutzungsbreite 7mm.
|
|
|
|
ADC SS-215 STEREO FREQUENCY EQUALIZER SOUND SHAPER Excellent Condition w/ Cords
This vintage eq is in great shape. Ships to USA only for rate quoted. Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13eaa993152-0x102-
|
|
|
STARRETT No. 599 PLANER SHAPER GAGE GAUGE *MINT IN BOX* MACHINIST TOOLS *X
STARRETT No. 599 PLANER SHAPER GAGE GAUGE*MINT IN BOX* MACHINIST TOOLS Condition/I n fo/Sizes: Excellent condition! All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Items must be won in the same week for a combined shipping discount. Notify me if you plan on bidding on multiple auctions. Payment due within 3 days of auction close unless other arrangements are made with me before the auction closes. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. ... moreI will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee! ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13eab8b37b3-0xfc-
|
|
|
ENGINE LATHE or METAL SHAPER TOOL HOLDER 3/8" hss bit ARMSTRONG USA T2-R
good used lathe or shaper tool holder Armstrong USA T2-R shank is approx 5/8" x 1 1/2" x 7 1/2" 3/8" Mo-max Cobalt bit will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 Moulding Shaper Blades Knives Found in Secret Room...T123
Secret room found A secret room was found on the 3rd. floor during renovation. What appeared to be a vent was actually a room.a secret room! This is an actual item from that room. 2 Moulding Shaper Moulder Knives Maker Unknown 4" x 2 1/4" x 1/4" Blades Have Some Tape and Rust. See Photos Visit my ebay store for more items from Staton Mansion Thanks for looking!
|
|
|
Laguna Heavy Duty Shaper
Professional grade shaper– verylightly used Laguna Model MSH4000-0180 Single Phase. 3 HP, 230V, 2 speed,3450 max RPM Opening inserts: 1-3/8” 2-3/4” 4”5” ½” and ¼” router collets Miter for T-slot guide ¾” x 3/8”included Dust port 4” Spindle travel 3” Full set of shaper bits and accessoriesincluded(see photo) 31x28.50 cast iron table Mobility kit All manuals and paperwork intact* Local Pick-up Only– Issaquah WA*
|
|
|
VOORWOOD L110 EDGE SHAPER, SANDER & FOILER / WOODWORKING
VOORWOOD L110 EDGE SHAPER. SANDER& FOILER/ WOODWORKING Click Images to Enlarge VOORWOOD L110 EDGE SHAPER. SANDER& FOILER/ WOODWORKING COMES AS SEEN IN PHOTOS ALL THE INFORMATION THAT WE HAVE IS STATED BELOW OR CAN BE SEEN IN THE PHOTOS. MADE BY VOORWOOD MODEL L110 SHOP NO. 6108 THREE PHASE Hz 60 AMPS 25 VAC 220 VOORWOOD MOTORS(1) 5HP 60Hz 230/460 RPM 3450 THREE PHASE 12.8/6.4 AMPS(1) 1 HP 230/460 3.0-1.5 AMPS 1725/1425 RPM CONTROLS REWIND TORQUE TEMP CONTROL SERIES 807 REWIND SHAPE FEED JOG HEAT SAND FEED FILM JOG WEIGHT 1100 LBS OVERALL SIZE 72"x42"x53" $30.00 LOADING FEE. $50.00 FOR PALLET. WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST. NO PAYPAL FOR ITEMS BEING WILL CALLED Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: ... moreDomestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Pre
|
|
|
Armstrong #49 Tool Holder from a Horizontal Metal Shaper, ??20"-24" size??
Offered here is an Armstron#49 Tool Holder that came from a Metal Shaper. The shapers I had seen in the shop were a 20" and 24" size. So I am assuming that this was from one of those. The shank size of the holder measures 1-5/8" high x 3/4" wide. The bar shown mounted in the holder is included.
|
|
|
Elgin Lathe or Shaper Tool Holder F/ 1/4" HSS Bits
SOTTOF SALES Old but in very good shape. Includes a new and unground MoMaxx Cobalt 1/4" HSS Bit. The tool holder is approx. 5" long and the shank is 1" x 1/2" Please look carefully at the photos as this holder has an unusual angle at which the bit is held. I am not quite sure how it is used. D3541.1 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) ... moreAny deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
FELLOWS MODEL 100GS GEAR SHAPER, WITH 80 TABLE, CHANGE GEARS 20151
in titles& description Name: FELLOWS MODEL 100GS GEAR SHAPER. WITH 80 TABLE, CHANGE GEARS, Ticket# 20151, Model: 100GS, Manufacturer: FELLOWS, Item located at: Hanover. MD, Serial# 31519-SPEC, Condition: Used, Terms& Condition: As is where i, Description: Major Plant Liquidation being held in conjunction with Koster Industries and Norman Machine Tool SPECIFICATIONS: MAXIMUM PITCH DIAMETER EXTERNAL: 100 In MINIMUM PITCH DIAMETER EXTERNAL: 44 In MAXIMUM PITCH DIAMETER INTERNAL: 100 In WITH 112 In OUTSIDE DIAMETER(DEPENDING ON PITCH& DESIGN) MINIMUM PITCH DIAMETER INTERNAL: 46 In MAXIMUM FACE WIDTH: 8 In MAXIMUM CLEARANCE(TOP OF TABLE TO BOTTOM OF CUTTER) 16 In STROKE LENGTH 8 In MAXIMUM DIAMETRICAL PITCH: FOR SPUR GEARS: 2 DP FOR HELICAL: 4 DP MAXIMUM HELIX ANGLE(WITH SPECIAL GUIDES) 35 Degrees PITCH DIAMETER OF CUTTER: 8 In TABLE: ... more80 In DIAMETER MECHANICAL SPECIFICATIONS: MACHINE DIMENSIONS: 17 Ft 2 In x 9 Ft x 10 Ft 11 In H MACHINE WEIGHT: 42.000 LBS THIS MACHINE IS BEING SOLD AT A LIQUIDATION; AS IS. WHERE IS CRATING. PACKAGING, SKIDDING ARE ALL ADDITIONAL CHARGES IF REQUIRED | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
SHAPER, METAL, SMITH & MILLS, 25", RUNS GOOD,
25" STROKE RAPIDS VISE. NOT IN PHOTO TO BE SUPPLIED WEIGHT APPROX. 7856 LBS. FINAL PRICE WILL INCLUDE LOADED ON TRUCK
|
|
|
AAMCO METAL SHAPER
AAMCO METAL SHAPER Will get more details in a few days. Have some P.C. issues. Comes as shown. Ships at 300 lbs. Call for shipping quote. Please email with any questions BEFORE you bid or order. We try to describe each item as accurately as possible. And want the bidder to be confident that the item is what they want. Our feedback record proves that we are trusted. We treat folks right. WE USUALLY SHIP WHICHEVER WAY IT WILL BE MOST AFFORDABLE TO YOU. IF YOU HAVE ANY PREFERRENCE OF SHIPPING THAT DIFFERS FROM OUR METHOD. PLEASE STATE IT IN ADVANCE. WE WILL BE HAPPY TO SHIP IT YOUR WAY, BUT YOU MUST LET US KNOW IN ADVANCE! If you are close to Beaver Falls. PA(Western PA 40 miles north of Pittsburgh and close to Ohio and West Virginia) you can certainly drop by and pick up your purchase during our store hours. You are invited. Just plan on staying ... morea while. It is a TRUE TOOL EXPERIENCE. If you have a problem with the transaction or the item received please call us or write us before you go negative with feedback. We will work it out. If you bid and buy something that does not fit YOUR needs. But is not our fault we will have to charge a 10% restocking fee. Any returned item must be in the same condition as when you received and in salable condition. If it has been altered or marred or pulled apart return privilege is voided. So be sure that the item you bid on or buy is what you need. Check your own specs first. Saves us all a lot of hassle and everyone is happy. And that's how we like it. Happy-Happy-Happy. We never charge handling charges. When we ship via UPS. We use* RECYCLED BOXES& PACKING* and charge only what UPS charges us. When applicable(if it is the best price for the buyer) we will ship U S P S. We get you the absolute best prices for truck freight shipment on larger items. Shipping Charges are NOT refundable. NOTE: PA Residents must pay
|
|
|
PLANER SHAPER GAGE GAUGE MACHINIST TOOLS 5 1/4" X 2 1/2" *A1
PLANER SHAPER GAGE GAUGE MACHINIST TOOLS 5 1/4" X 2 1/2" Condition/I n fo: Excellent condition. No additional attachments Welcome to my Friday night auctions. Last weeks auctions auction close one minute apart and new ones go up. Action starts at 9:00PM Eastern time. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping ... morecosts do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
Vintage ADC Sound Shaper Two SS-2 IC Stereo Equalizer *RARE!* *VERY NICE !*
Here is a very nice condition ADC Sound Shaper Two IC Stereo Frequency Equalizer. Model# SS-2 IC. I have tested the unit and it is fully functional. The manual is also included.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13eb6adaa9d-0x101-
|
|
|
Fay and Egan Shaper Lightning 552 With Festo Feeder
Fay and Egan Shaper Lightning 552 With Festo Feeder Description Item: Fay and Egan Shaper Lightning 552 With Festo Feeder Manufacturer: Fay and Egan of Cincinnati USA/ Festo Model: Lightning 552 Serial#1416 Description: Fay and Egan Shaper with Festo Feeder. It has a ¾“ spindle and has been fitted with an industrial safety switch with an indicator light. There is an attachment for 4” dust extraction. The Festo Feeder model 1901 has 8 speeds from 10-120 fmp. It is 220 v. New feed rollers are needed for the feeder. Voltage:220/440 wired presently for 220v-it was running on 208v p hase: 3 phase/ Hp: 5 rpm 3475 Outside Dimensions: 42” x 42” x 62” h Estimated Weight: guessing around 2.500# Condition: good. Just removed from working shop. The bed has light rust from storage these last weeks: easily removed with wire wool. It is in A-1 working ... morecondition and has been well maintained. The Festo feeder needs new rollers however. It can be swung out of the way for hand feeding. Please Note: The item is located at a facility in Farmington. Pa. 15437. Your welcome to pick the item up with a pre scheduled date. The facility is equipped with the necessary means of safely loading your item. As always if your not satisfied with your purchase contact me. Satisfaction is Very Important to us as is Detailed Seller Ratings Payment I accept Pay-Pal and payment on local pick ups can be arranged. Please pay with-in 7 days of sent invoice. Local pick ups are encouraged on lager items. Packing slips are available upon request. Shipping I do ship World wide and I ship every business day including Saturdays. I do offer Combined shipping. I have provided a shipping calculator for your convenience. Feel free to contact us if you need assistance. We do appreciate any ones packing instructions for specialty items. All items are digitally weighed and placed in a larger container. Professional packing material is provided for their safe journey. Shipping is calculated by weight of packaged item, size of item and distance. Shipping labels are
|
|
|
violin reamer soundpost setters peg shaper neck blank and maple back wood
Up for sale is a beautiful lot of violin tools and wood. A herdim violin/viola 1:30 peg reamer and cello peg reamer. A German cello and violin soundpost setter. An adjustable violin peg shaper. 2 beautifully flamed maple neck blanks. Two equally beautifully flamed maple back billets and 24 violin/viola spool clamps in like new condition. Wood is at least 5 years old. Bought at an estate sale with other wood working tools. Don't know much about it. What you see is what you get. Happy bidding! Posted with
|
|
|
1977 LAURIE JENSEN Astro-Trimmer reducer shaper 1-PG AD
Wonderful vintage magazine PAGE advertisement for Astro-Trimmer Waist& Tummy Reducer. Monterey, CA. Ad features LAURIE JENSEN. This is an original magazine ad from 1977. AD measures approx. 8" x 10 3/4" including the margins) CLICK HERE to view our other fitness ads! CLICK HERE to view ALL our other VINTAGE paper advertising! US Buyers- Additional ads ship for free. Please make one combined payment if possible. INTERNATIONAL buyers- PLEASE WAIT for your invoice. Additional ads can be combined- Combined s/h will depend on actual weight. d89
|
|
|
Freud 2 Knife Performance System Shaper Cutter Head with 21 Knife Sets
Freud 2 knife cutter head system. Most bits unused. Faint markings from prior woodworking company name on case. Unknown system-cutter head marked Nr. 546 17. 21 knife sets in total. Posted with
|
|
|
CAT40 Shaper Broach Volstro VMC Attachment
CAT40 broaching or shaping attachment. Very good condition. Made by Volstro. Rarely used. Serial number 07692. About 1 1/16 stroke. Posted with
|
|
|
Lot 758 Ogee Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for ogee moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I ... morewill be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 756 Drip Ledge Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beaded drip moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Vintage Wards "Powr-Kraft" Shaper Cutter Blade No. 84-2494 in Original Box
Vintage Wards"Powr-Kraft" Shaper Cutter Blade No. 84-2494 in Original Box You are bidding on a vintage Wards"Powr-Kraft" Shaper Cutter Blade No. 84-2494 in the original box. In very good, used condition. This is a high speed steel blade made for Montgomery Ward by Rockwell Delta Manufacturing Company. This blade is in the original box which bears the part number and shows the profile of the cutter. This cutter blade has a 1/2" bore arbor hole and a 1 1/4" profile height. The box measures 2 1/8" by 2 1/8" by 1 1/2" and has no torn or missing"flaps" Please see all of the photos for the condition of this item and judge for yourself. I f you need additional information or have questions. Please ask before bidding. Your purchase will be carefully and securely packaged. And in most cases will ... morebe shipped the next business day after your payment is received. All Weights and Dimensions are Approximate. On Dec-09-12 at 11:09:56 PST. Seller added the following information:
|
|
|
Lot 766 Classical Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice classical casing moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ebc647480-0x106-
|
|
|
Lot 764 Bead Bullnose Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for bead or bullnose moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13ebc64762e-0xfb-
|
|
|
Lot 760 Reeded Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for reeded casing moulding 5/16" thick. Needs touch up grind for best results. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. ... moreBulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 754 Angle Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for ~45 deg back cut moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
PLANER / SHAPER GAGE VINTAGE MACHINIST/ TOOL MAKER
USA Tool Maker made Planer/ Shaper gauge with two attachable posts(1" 5/8" and scribe attachment.Triangle is 3& 3/4" by 1& 3/4" by 1/2" Precision ground hardened steel. Works fine. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ebe73e3d2-0x104-
|
|
|
Rockwell Delta Shaper Cutter D-101 (09 101) 5/16 Cove 3/8 Bead
Slightly used D-101(09-101) 5/16 cove 3/8 bead cutter. Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Lot 749 Ogee Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various ogee edge and panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future ... moreknife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 775 Beaded Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom metro beaded casing or pilaster moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Rockwell Delta Shaper Cutter D-120 (09 120) Ogee
Slightly used D-120(09-120) Ogee cutter. Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Lot 774 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom symmetrical casing or pilaster moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 747 Edge Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various edge and panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future ... moreknife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 773 Band Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various chair rails or banding moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of ... morefuture knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 745 Luxury Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beautiful casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 771 U & V Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for edge moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I ... morewill be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Rockwell Delta D-100 1/2" 5/16" Cove 5/16 qt. rd. Shaper Cutter
Slightly used Delta Rockwell Shaper 1/2" cove. 5/16" qt. rd. D-100(09-100) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Rockwell Delta D-214 Panel Raising Shaper Cutter
Never used Delta Rockwell Shaper panel raising cutter D-214(09-214) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Lot 768 Base Or Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative traditional base or casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ebedb5d58-0x106-
|
|
|
Rockwell Delta D-238 Shaper Cutter
Never used 3/4" bead Delta Rockwell Shaper cutter D-238(09-238) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Rockwell Delta D-202 Shaper Cutter
Slightly used 1/2" bead Delta Rockwell Shaper cutter D-202(09-202) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
|
|
|
ADC Sound Shaper SS-412X Stereo Equalizer - Refurbished
ADC Model SS-412X Stereo Equalizer Fully Refurbished- 30 Day Warranty Connections: Line In/Out. Tape 1 In/Out, Tape 2 In/Out. No other cables or documentation included. Works great and sounds amazing! Minor scuffs but does not look bad. All refurbished electronics are guaranteed to be in excellent working condition. And refurbished by a qualified and bonafide electronics technichian. Blown components have been replaced, suspect components have been replaced. We want our items to be better than they were originally from the factory. Any repairs or refurbishing done uses components of superior specifications to the original equipment. We are a professional electronic repair company. And we have dedicated our lives to the art of repair, only to be used for good! Never evil! We stand behind our products. We guarantee that it will be shipped out ... morein fully functional condition. Thank you for your interest in our company. We hope to do business with you in the future. And provide the best quality refurbished items available online. RETURNS: If an item is non-functional when it arrives to you. Or if for some reason you are dissatisfied with the product, I will provide a free replacement or a full refund including initial shipping. All items will be re-tested before refund is given and buyer will be responsible for return shipping in all cases. Buyer pays specified shipping within the Continental US. We do not ship any items internationally. I will waive the shipping charge if you are in(or will be in) the Denver. CO area and would like to make arrangements to pick item up. 7.6% Sales Tax for Colorado Residents Shipping cost is for First Class. Priority or FedEx in the continental US depending on wieght. If you would like faster shipping, let me know before you pay at the end of the auction and I can give you a new shipping cost. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Freeborn Concave Half Round Shaper Cutter
Freeborn PT-24-009 concave half round shaper cutter. 3 wings. Alloy tipped, 1 1/4" bore, 4.00" diameter, 1/4" kerf. Use on solid woods only, no man made products. This cutter has never been sharpened. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Rockford hydraulic Shaper
Used 16 in Rockford Hydraulic shaper. This is stored outdoors and needs work. Selling as is untested. Local pick up only so you can inspect in person. We have a forklift on our end to load. Posted with
|
|
|
Lot 789 Detailed Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice casing moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 786 Casement Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for heavy casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13ec05da3e4-0xff-
|
|
|
Lot 780 Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom case moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 779 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom base moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ec05da4f1-0x104-
|
|
|
Lot 777 Block Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for block paneling moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
PRONTO TACO SHELL TORTILLA SHAPER FRYER FRYING SHAPING BASKET MAKER HOLDER MOLD
PRONTO TACO SHELL TORTILLA SHAPER FRYER FRYING SHAPING BASKET MAKER HOLDER MOLD This auction is for a taco shel shaper frying basket that hold 5 tortillas for shaping and frying. It is in used condition and is missing one of the 5 inner metal shaping frames. The basket measures 7-1/2" by 6-1/2" by 3-1/2" deep with an 8-1/2" handle and has both side and front brackets.These will fi t on most commercial deep fryers and a lso work well for home use as they will fit in most rectangular shaped fryers such as Anvil. Rival and Presto. This item has been previously used and the cosmetic condition can be seen in the pictures I have more kitchen items for sale. And I will be happy to combine shipping on multiple purchases whenever possible. So check my other active listings. Please ask any questions BEFORE purchasing, avoid returns. ... morePayment by Paypal only due at auction end. Buyer to pay USPS shipping and a very small handling fee. Shipping weight about 8 lbs. I am emptying out a house full of treasures. After 40 years. We are moving from a big house on a half acre lot to a small 2 bedroom condo, so Im doing some serious down-sizing. Check my other active listings.
|
|
|
ADC Sound Shaper SS-VIII Graphic equalizer LED slider display, Works great VGC
Here is a classic ADC EQ model SS-VIII with LED slider display and preset EQ modes. Has quick EQ settings for Instant access to several"curves" LED slider buttons Illuminated with LED's Gives a clear and visual indication of frequency points on each of the ten sliders per channel for custom tailoring the sound, Tested prior to auction in perfect working condition,Money back if not delighted, Thank you, Note a little info on our last negative feedback.sigh) This person used another account to purchase the item after he told us( Your asking way to much for it and do everyone a favor and leave eBay" we added his account to the block bidder list only to have him open a second account to buy the item for the"insane" asking price just to slander us and ruin our perfect feedback, Sadly Ebay fully Supports Buyers who ... morecan be childish Bullies and wont remove feedback with out paying their layers, If you are interested in quality used electronics and toys, that's what we do, AlsoWe try our best to satisfy everyone, and sold thousands of things,but again, I am not perfect, that is why you are always able to return any item we sell for a full refund with eBay's buyer protection, If you don't like how or what we are selling please refrain from comments such as"luddydrummer aka terbutz aka luddydrums and prevent troubles for us both,yes he opened even a 3rd more account to harass us with immature insults) Thank you for the interest in my auctions.
|
|
|
FORMFIT ROGERS DRESS SHAPER LACE RED BRA, LINGERIE VINTAGE PRINT AD 1950S
FORMFIT ROGERS DRESS SHAPER LACE RED BRA. LINGERIE VINTAGE PRINT AD 1950S Description. Normal 0 false false false EN-US X-NONE X-NONE This is an original vintage advertisement of collectible quality foR: FORMFIT ROGERS DRESS SHAPER LACE RED BRA. LINGERIE VINTAGE PRINT AD 1950S The size of this advertisement is approximately- 10.25 X 13.25 The photograph in the listing is of the actual item for sale. All of our vintage advertisements that are listed are very good to excellent condition. Many being excellent as we chose only the best for posting to suit the needs of a collector. Please note any edge yellowing or other slight age issues as many are from forty to eighty years old. To maintain the quality of the advertisement. We take great care and time in removing them from their original magazines or periodicals. We store them in archival quality ... moresleeves with boards and ship in rigid mailing envelopes. All of our advertisement listings are amazing examples of advertising as it was done during a given time period. Some of these are rare ads that we have found for items that were cutting edge for the time. adv104 About Us. PAYMENT IS VIA PAYPAL- Its the best way to protect your investment as well as ours. Payment should be made within 5 days after auction closed. If that is a problem meeting the timeline for payment please contact to make arrangements. We're happy to help if you need a little time. SHIPPING& POSTAGE FEES- are listed for each item just below the price and will be shipped USPS unless otherwise noted. DISCOUNTED SHIPPING! Multiple orders if ending within a reasonable time period will be eligible for lower shipping costs. On the rare occasion this isn't possible if the items are too different to ship together safely. But it is doable the majority of the time. INTERNATIONAL SHIPPING- Depending on the item we can ship international. Please contact us before bidding or buying to get an estimate on int'l shipping. Can't always get the low rate you may be wanting. CHECK OUT OUR GREAT FEEDB
|
|
|
DON'T ENVY THE GIRL WITH FIGURE, FORMFIT SHAPER BRA SHADOW VINTAGE MAG AD 1960s
DON'T ENVY THE GIRL WITH FIGURE. FORMFIT SHAPER BRA SHADOW VINTAGE MAG AD 1960s Description. Normal 0 false false false EN-US X-NONE X-NONE This is an original vintage advertisement of collectible quality foR: DON'T ENVY THE GIRL WITH FIGURE. FORMFIT SHAPER BRA SHADOW VINTAGE MAG AD 1960s The size of this advertisement is approximately- 13.25 X 10.5 INCHES The photograph in the listing is of the actual item for sale. All of our vintage advertisements that are listed are very good to excellent condition. Many being excellent as we chose only the best for posting to suit the needs of a collector. Please note any edge yellowing or other slight age issues as many are from forty to eighty years old. To maintain the quality of the advertisement. We take great care and time in removing them from their original magazines or periodicals. We ... morestore them in archival quality sleeves with boards and ship in rigid mailing envelopes. All of our advertisement listings are amazing examples of advertising as it was done during a given time period. Some of these are rare ads that we have found for items that were cutting edge for the time. adv101 About Us. PAYMENT IS VIA PAYPAL- Its the best way to protect your investment as well as ours. Payment should be made within 5 days after auction closed. If that is a problem meeting the timeline for payment please contact to make arrangements. We're happy to help if you need a little time. SHIPPING& POSTAGE FEES- are listed for each item just below the price and will be shipped USPS unless otherwise noted. DISCOUNTED SHIPPING! Multiple orders if ending within a reasonable time period will be eligible for lower shipping costs. On the rare occasion this isn't possible if the items are too different to ship together safely. But it is doable the majority of the time. INTERNATIONAL SHIPPING- Depending on the item we can ship international. Please contact us before bidding or buying to get an estimate on int'l shipping. Can't always get the low rate you may be wanting.
|
|
|
Incredible Hulk Vol 1 #191 1975 Marvel Comics Glorian Shaper Toad Men Trimpe Art
Details Publisher: Marvel Comics Title: Incredible Hulk Issue: 191 Year: 1975 Condition: FN Book is complete. This is a great addition to the collection of any Super Hero fan. See below for payment and shipping directions. If you require further scans. Tell me what you require and send me your email address and I will get them off to you as quickly as possible. If you have any questions about the item. Payment or shipping details, please don't hesitate to contact me at my eBay mailbox, before you bid. I will respond ASAP. Thank-you and good luck bidding. Normal 0 false false false MicrosoftInternetExplorer4 Please click on the link to view my store. Dragons Den Collectibles LLC or click on View sellers other item's to view all of my current auctions. I combine shipping and handling on multiple auction wins whenever possible. Combined ... moreAuction Win Comic Books US Canada International Quantity 1 st Class Mail/ Media Mail Priority Mail 1 st Class Mail International Priority Mail International 1 st Class Mail International Priority Mail International 1 Comic Book $4.00 $7.00 $10.00 $21.00 $14.00 $25.00 2 Comic Books $4.00 $7.00 $11.00 $21.00 $16.00 $25.00 3 Comic Books $4.00 $7.00 $12.00 $21.00 $18.00 $25.00 4 Comic Books $4.00 $7.00 $13.00 $21.00 $20.00 $25.00 5 Comic Books $4.00 $7.00 $15.00 $21.00 $22.00 $25.00 6 Comic Books $4.00 $7.00 $16.00 $21.00 $24.00 $25.00 7 Comic Books $4.00 $7.00 $18.00 $21.00 $26.00 $25.00 8 Comic Books $5.00 $7.00 $19.00 $21.00 $27.00 $25.00 9 Comic Books $5.00 $7.00 $20.00 $21.00 $28.00 $25.00 10 Comic Books $5.00 $7.00 $22.00 $21.00 $31.00 $25.00 11-20 Comic Books $6.00 $14.00 n/a $42.00 $34.00 $50.00 21-30 Comic Books $7.00 $14.00 n/a $42.00 n/a $61.00 31-40 Comic Books $8.00 $14.00 n/a $42.00 n/a $61.00 41-50 Comic Books $9.00 $14.00 n/a $42.00 n/a $61.00 51-60 Comic Books $11.00 $14.00 n/a $42.00 n/a $61.00 Grading System M Mint[ M+: 10. M: 9.9, M- 9.8] This is a perfect comic book with no defects of any kind, full cover gloss, sharp corners, clean shiny staples, centered at
|
|
|
Steptoe shaper gear cutting machine
Metal shaper Steptoe Big 4 weighs 3000 lbs. Vise is not included we can load a flatbed on our end. Shipping is additional. Sold as is. Came out of running shop. But we did not see it operate. Selling as is untested. Posted with
|
|
|
LARGE CUSTOM MADE SHAPER PLANER GAGE GAUGE 1 1/4 X 5 1/2
GOOD CONDITION NO OWNERS MARK OR ENGRAVING. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
Lathe Mill Shaper Grinder Attachment Tool Shoe Diamond Dresser Rest Setup????
Description: Here's a Lathe Mill Shaper Grinder Tool Attachment Shoe. Maybe used for diamond dresser rest setup indicator? Not Sure! Has a 5/8" hole. With a slot that takes a 1/2" bolt and this is 6" long. This weighes just over 2 lbs. Came with a early small tool grinder. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping ... morethan I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
|
|
|
Set of Shaper Bits. Great Condition!! No Reserve!!
Up for sale is a set of shaper bits. These items are in great condition. Need different tools? Then check out our other listings!
|
|
|
LORENZ (LIEBHERR) MODEL LFS-282 CNC GEAR SHAPER WITH AUTO LOAD/UNLOAD SYSTEM
LORENZ(LIEBHERR) MODEL LFS-282 CNC GEAR SHAPER WITH AUTO LOAD/UNLOAD SYSTEM General Specifications Table diameter 320mm Table bore diameter/depth 150/350mm Max. table speed 30 rev/min Max. toothing diameter 280mm Max. diameter internal gearing 280mm Max. diameter inner teeth 250mm Outer diameter wheelbase cutter spindle to work table 280mm Radial velocity infinitely programmable 0-3.750mm/min Total weight(basic machine) 13000 Kg Ambient temperature 15-38deg C Machine stand: Axial travel 250mm Cutting spindle head carriage: Traversing-stroke position 250mm Max. traversing 1800mm/min Max. swivel angle 12 deg. Drive power 22kW Max. Module saping 6mm Spindle shaft diameter 90 Max. stroke 100 Stroke 80-1200 cycles/min Max. tool diamter 240mm Max. spindle speed 30 rev/min Axis angle adjustment head butt/vertical_0.5deg. Spindle: Min. Stroke 0 mm ... moreMax. Stroke 100mm Max.Verzahnbreite(straight teeth.Standard cams) 87mm Adjustment max. 600 mm/min Cont. on page 2 Stock 1 23 SERIAL NUMBER 4 NEW 5 2 Motor Specifications Not Available Equipped With Small hydraulic unit Hydrostatics. Lubrication Coolant system Indramat drives AC Control: Liebherr CNC LH90 V4 based on a PC-NC. Intregrated soft PLC control& decentralized PLC peripheral via profibus DP, Brand WAGO. PLC SIEMENS STEP 5 programming language Built-in floppy disk drive. INDRAMAT drives with SERCOS interface to the CNC. Screen: 10" Color TFT display Prompt: Prompt type 2 and dialog progamming with the use of WINDOWS- Metric system of measurement swithcable/inch Remote diagnostics Liebherr control LH90-V4 Recording and graphic display of internal control. Machine and driving conditions Error logging and error analysis and oscilloscope. Review and possible modification of NC program, Review and possible modifications of the PLC program PLC configuration(activate the option) Software update. Communication with the operator, Remote diagnostics of charge during the warranty. Operating& Control voltage: Operation voltage 415 V +/10% 50Hz +/2% Net form: TN system
|
|
|
ADC Sound Shaper Eleven Eqiualizer - works perfectly
If your room's acoustics need a bit of help. If your speakers have a flat spot, or if you have a slight hearing loss in certain frequencies then this is what you need. All functions work smoothly and properly- not a hint of static anywhere. All lights including power on, all sliders, and meters light as they should. There isn't a ding or dent anywhere and none of the knobs are loose. There is a 1/8 inch scratch on either upper corner, but that's it. Guaranteed to work or your money back, but buyer pays return shipping. Will be packed in bubble wrap and Styrofoam. Accepting PayPal only. Available for local pickup in Northern N.J.
|
|
|
GRIZZLY MINI SHAPER MODEL G8693 WITH MANUAL
GRIZZLY MINI SHARPNER MODEL G8693 WITH MANUAL.WORKS.USED CONDITION.WHAT YOU SEE IN THE PICTURES IS WHAT GOES WITH.SPINDLE SIZE 1/2"TABLE SIZE 12 X 10"CUTTER HEIGHT 1 9/16"MOTOR 3/4 HP.SPINDLE SPEED 12000 RPMS.SELL IN THE LOWER 48 STATES ONLY.
|
|
|
BRIDGEWOOD COMMERCIAL SHAPER/FEEDER/JOINER/ LOT OF 3
BRIDGEWOOD COMMERCIAL SHAPER AND FEEDER 2 SHAPER FEEDERS AND JOINER SHAPER 1- FEEDER WORKS PERFECT. SHAPER HAS A NEW MOTOR. MOTOR WAS NOT SPECKED PROPERLY. THIS IS AN EASY FIX. SHAPER 2- SMALLER MODEL. SHAPER AND FEEDER WORK PERFECTLY BRIDGEWOOD JOINER- WORKS PERFECTLY. COVER IS MISSING FROM SWITCH LOCAL PICK-UP
|
|
|
EQUALIZE ..ADC..SHOUND SHAPER...SS300SL
WORKING GREAT.
|
|
|
Original Walker-Turner 1934 Bench Saw Jointer and Shaper Handbook
This is for a Original Walker-Turner 1934 Bench Saw Jointer and Shaper Handbook. Book is in Good condition.
|
|
|
ADC Sound Shaper 30 Specturm Analyzer Frequency Equalizer, near mint
This ADC Sound Shaper30 Specturm Analyzer Frequency Equalizer is in near mint shape Lovingly cared for. Looks like it came right out of the box Very high quality components• 10 frequency band sliders on the right and 10 on the left• All LEDs on sliders are working• All buttons and knobs are present• Spectrum Analyzer screens adds a net touch Use the Buy it Now at $89.95 Shipping is UPS Ground Insured
|
|
|
VINTAGE COULTER OPENSIDE PLANER SHAPER SHAPING PLANER BROCHURE
7 DAY AUCTION! VINTAGE COULTER"THE SHAPING PLANER' BROCHURE COULTER AUTOMATICS(CT) COULTER WAS THE ORIGINATOR OF THE OPEN SIDE PLANER WITH SHAPER DRIVE TO TABLE 24" STR OKE MACHINE SPEC S. FEATURES, MACHINING SETUPS& PHOTOS 8 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' ... moreOF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
|
|
|
Lot of 3 LRH Enterprises Shaper Cutters Carbide Tip 1" Bore No Reserve Auction
These LRH shaper cutters show no wear- not sure of the exact patterns. All blades are 1" total in length thanks for looking
|
|
|
ICE CREAM WAFFLE CONE SHAPER / ROLLER, Used
ICE CREAM WAFFLE CONE SHAPER/ ROLLER This ICE CREAM WAFFLE CONE SHAPER/ ROLLER is used but is in excellent condition. The roller is made of top quality STAINLESS STEEL. The cone-shaper is made of heavy duty cast alloy. Approximately 9 1/2" long. Used but in very good condition. Handle is covered with a black rubber coating.
|
|
|
OK TOOL CO BIT SHARPENING TOOL HOLDER metal shaper planer boring mill cutters
good used tool holder The OK Tool Co. USA 2421-E holds E-series tool bits while sharpening please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
METAL SHAPER or PLANER POWER FEED RACHETS parts or repair
good used shaper or planer feed ratchets- parts or repair no idea which models they fit please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
METAL SHAPER or PLANER TOOL HOLDER 1/2 x 3/4 hss bit ARMSTRONG USA No. 42
good used metal shaper or planer tool holder Armstrong USA No. 42 shank is approx 1 1/8" x 1 3/4" x 13" with 1/2" x 3/4" empire tool co hss bit please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items. o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13ed3ed181b-0xfe-
|
|
|
JD Wallace wood shaper and cutting bits
Made in USA. Excellent working condition. 1 phase, 8500rpm, 110volt, 7.5 amp, 20 x 30 inch table. Comes with two new carbide cutters and one older one. Estimated to weigh 150 lbs. Free local pickup or actual shipping charges plus $25.
|
|
|
Atlas Metal Shaper, S7-3 Ram With S7-103 Shaft And Gear.
Atlas Metal Shaper. S7-3 Ram With S7-103 Shaft And Gear. Shipping may vary depending on location.
|
|
|
Atlas Shaper Shaft S7-58 Shaft. With S7-60A Gear.
Atlas Shaper Shaft S7-58 Shaft. With S7-60A Gear.
|
|
|
LASL MODEL 8023 OUTPUT SHAPER NIM BIN MODULE PLUG IN
LASL MODEL 8023 OUTPUT SHAPER NIM BIN MODULE PLUG IN Description: Thank you for your interest! We are auctioning off this LASL MODEL 8023 OUTPUT SHAPER NIM BIN MODULE PLUG IN. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN! Some cosmetic wear. Guaranteed working. You have 14 days to try it out fully with right of return. ALL international sa les sold as is. 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the ... moreassumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WELCOMED-PLEASE CONTACT US FOR ACCURATE SHIPPING CHARGES. Payment: Gladly accept most forms of payment including paypal. Click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
ENGINE LATHE or METAL SHAPER PARTING TOOL HOLDER hss blade WILLIAMS USA
good used lathe or shaper tool holder- parting Williams USA shank is approx 5/8" x 1 1/2" x 8 1/2" these are a handy slotting tool for a metal shaper will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ENGINE LATHE or METAL SHAPER TOOL HOLDER 1/2" hss bit 5/8 x 1 3/8 x 10
good used lathe or shaper tool holder Williams or Armstrong USA shank has been cut down shank is approx 5/8" x 1 3/8 x 10" long 1/2" hss bit please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Noritsu APS Fara300 ADT240 FRAF FRAR Photo Film Auto Detacher Shaper Reattacher
This is a great lot of Advanced Photo System film equipment by Noritsu with Instruction Manuals. There is a ADT-240. A Fara-300, a FRA-F and a FRA-R. This equipment is used to prepare APS film for processing by loading it into plastic film cassettes for processing. There are 6 cassettes included. The equipment is in good working condition. A 21 Pound shipping quote has been quoted. This would make an excellent addition to any collection. Please ask any detailed questions before listings end and I would be glad to help as much as possible. Payment is requested by PAYPAL within 3 days. If communication is not received then a Dispute will follow according to eBay policy. All reasonable questions or requests on this listing will be conducted before the listing ends. All items described to the best of my knowledge. I send an invoice only when ... moremultiple listings are won or when communication refused. I combine shipping whenever possible. USPS is 2 Day Minimum 30 Day Maximum. I ship on Monday. Tuesday and Thursday. No Bad Language. Threats or Demands will be tolerated whatsoever. FOREIGN customers are liable for mail that is not Registered Mail. This is not a Registered Mail quote. First Class Letter rate is $2.25 first 2 Ounce Feedback left when received.
|
|
|
ATLAS 7B METAL SHAPER RAM DRIVE LINK
DESCRIPTION: USED. DRIVE LINK FOR THE ATLAS 7B. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;
|
|
|
ATLAS 7B METAL SHAPER BOX TABLE W/ FRONT LEG
DESCRIPTION: USED. BOX TABLE FOR THE ATLAS 7B. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;V
|
|
|
Packetwise Packeteer 10000 SERIES SHAPER
THIS IS A PACKATEER 10000 SERIES SHAPER UNIT POWERS UP# Shipping on this item is 38.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it ... moreis a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item30.
|
|
|
Vintage Craftsman Heavy Duty Cast Shaper Router Planer local pick up only
Vintage Craftsman I guess you call it a Shaper/ Router Table not quite sure. It is on a Very Heavy Duty Cast Semi-Oval Base approx 21" long by 12" Wide and 2-1/4" Thick I guess you could Bolt it down to your workbench. The Grid type Table on top is approx 27" by 19" It is VERY Heavy. It has a Craftsman Motor with the tag as pictured it does run but being that I know nothing about this tool I am selling it as/is. Local Pick up only LOCAL PICK UP ONLY THIS ITEM IS FOR PICK UP ONLY HERE IN LOWELL. IN, 46356. WE WILL BE ABLE TO ASSIST IN LOADING. ALL ITEMS ARE EXPERTLY PACKED TO ARRIVE IN GOOD ORDER. The items we sell are vintage items. Since all of our items come from local estates or auctions. We offer no warranty, either expressed or implied. We will tell you if an item has been tested, to what degree it has been tested ... moreand what functions work or don't work. All items are sold AS IS/WHERE IS. All items are available for local pick up at no cost. We can work with just about any schedule WE NEED CONTACT WITHIN 48 HOURS WITH PAYMENT INTENTIONS& Payment is expected within 4 days of invoice. We do file with ebay if payment is not received within 4 days. If you need additional time. Please let us know. We accept PayPal, payments via mail or cash at pick up. Please inquire for more info. ALL INDIANA SALES& ITEMS PICKED UP& PAID FOR HERE IN INDIANA ARE SUBJECT TO 7% INDIANA SALES TAX.
|
|
|
Vintage Northfield Heavy Duty Shaper
A 1964 Northfield Heavy Duty Shaper in good condition. Serial number 644232. The table measures 36" by 26" The 3 HP motor requires 3 phase power and runs at 3490 RPM. These shapers now cost $8030.00 from Northfield. I installed a 3 1/4" by 3" Byrd Shelix head that comes with it. I will take the listed price or best offer. Local pickup only. Check out my! I will contact the winning bidders by e-mail within 24 hours after the auction has ended. Winning bidders must confirm the order within 3 days. Payment must be received within 7 days after the auction has ended. All items not paid for within the 7 day will be relisted. I will combine shipping for multiple items purchased. And will contact you with the lower combined shipping price. Payment must be made via Paypal due to eBay rules. If you have less than ten transactions, ... moreplease contact me before bidding. If you have a question, please ask me before you start bidding. Feel free to contact me with any questions you may have. If you have a problem, send me an email through the eBay system. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13ede0a5ec2-0xfc-
|
|
|
RARE ADC SS-VIII STEREO GRAPHIC EQUALIZER 10 BAND XCLNT SOUND SHAPER 8 EQ METERS
Here is a Beautiful Example of a Rare ADC Model SS-VIII Stereo 10 Band Graphic Equalizer. This EQ is in Excellent Working condition and Cosmetic condition. The faceplate is Very clean, no scratches all lettering is intact and not worn, All Display lights work, all buttons intact& working, no noise in controls, no hum or rumble. The Cabinet is also clean all corners are sharp, no dents or gouges. It has been well cared for. Please see photos for details. It sounds and works great! It Has swing feature control it is very cool it flashes each control light in motion one at a time from left to right also has presets and tape monitor. My zip code is 33614 for shipping est. no extra charges for shipping supplies buyer pays shipping only. I do take pride in packaging and I will pack with great care at no extra charge. Poly bags, edge protector, ... morebubble wrap, shrink warp, styrofoam and double boxes etc. Like to use UPS, FedEx. I prefer paypal, cashier check, payment within 3 days after auction, Please buy with confidence see my FEEDBACKS I do not sell junk, Sold as is but NOT DOA. This is a NO RESERVE AUCTION. Thank you for Looking, Chris
|
|
|
Porter Cable 5182 Router W/ Base / Heavy Duty / Shaper Alternative
You are bidding on a older Porter Cable 5182 heavy duty router. This has a 1/2" collet. This runs great. Smooth and powerful. Digital readout for 5 variable speed settings. 10000 rpm- 22000 rpm. This would make a great router for a router table. I do not have the wrenches. Insulation on cord is cracked where it enters router. Posted with
|
|
|
Delta Rockwell Shaper Model JT2 Heavy Duty
Delta Rockwell Model JT2 Heavy Duty Shaper HAS FORWARD AND REVERSE GEARS ELECTRIC MOTOR 220/440V 3 PHASE MODEL 87-611 SN:P66P2A18 3450 RPM INCLUDES WOODEN ATTACHMENT/OUTLET TO DUST COLLECTOR TABLE TOP DIMENSIONS ARE 27x27 SQUARE!IF YOU ARE INTERESTED PLEASE MESSAGE ME YOUR ADDRESS INCLUDING ZIP AND I WILL GET YOU A FREIGHT QUOTE! 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ee270c8f2-0x106-
|
|
|
Lot 819 Chair Rail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom chair rail or panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future ... moreknife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 817 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beautiful pilaster or casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of ... morefuture knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 815 Cove & Bead Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various cove and bead edge and panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 814 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I ... morewill be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
 |