In 
 
Order by: 
Available to: 
Price: 
 - 
$
24.99
Buy It Now
Free Shipping
Condition: New
Location: Frisco, United States
CMT 690.554 Profiled Knives for Shaper Cutters. Made of alloyed steel.
$
45.00
Buy It Now
$7.50 Shipping
Condition: New – Open box
Location: Norwich, United States
Base of guide has two 120 deg vees. Which accepts round parts, 3/8" diameter x 1/2" stem for chucking alignment, Hardened jaws, Center drill ... moreon stem for floating center, Complete set with guide. Holder plus"A" jaws(0.80 to 1/4"20/28 taps) and"B" jaws(1/4"20 to 1/2"13 taps)
$
22.27
Buy It Now
Free Shipping
Condition: New
Location: Joliet, United States
From the Manufacturer Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above ... morethe cutter to bear against the spindle nut. Every shaper owner needs a set of these on hand.
$
999.00
Buy It Now
$99.00 Shipping
Condition: New
Location: Turkey
TR Maker Belt Grinder 2x72 " Classice. NOT FOR SALENOT FOR SALENOT FOR SALENOT FOR SALENOT FOR SALE. NOT FOR SALE. If you place an order then change your ... moremind, just let us know as soon as possible. When we receive.
$
127.75
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This is an 1-1/4" shaper spindle spacer set. There are 11 pieces: 1-1-1/4", 2-1", 2-5/8", 2-7/16", 2-3/8", and 2-1/4". Use these to take up the extra ... morespace on the spindle.
$
65.00
Buy It Now
$10.00 Shipping
Condition: New – Open box
Location: Ukraine
Material HSS P18 (T1). Outside Dia - 25,5 mm. Blank Thinkness - 5 mm. Number of teeth - 60. Pressure angle - 20 deg. V - 1,0 - 1,4 %. W - 17,0 - 18,5%. ... moreCr - 3,8 - 4,4 %.
$
750.00
Buy It Now
$110.02 Shipping
Condition: Used
Location: Yorktown, United States
HARD TO FIND!!
$
3250.00
Buy It Now
Condition: Used
Location: Millstadt, United States
It powers up fine and will emboss off the keypad with limited testing.
$
1644.30
Buy It Now
Free Shipping
Condition: New
Location: China
The Work-Bee CNC Machine uses specific lengths of Extrusions and Leadscrews. Bulk-Man 3D is the largest wholesaler of Open Source CNC parts to the world. ... moreBy having the parts produced ourselves, or sourcing the parts directly from the factory, we eliminate the middle man and in doing so are able to provide the best wholesale price direct to the public!
$
21.55
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This is a pair of new shaper T-bushings. Bushes your 1-1/4" bore shaper cutter down to 3/4". These have the short flange and will work on any 3/4" spindle.
$
42.00
Buy It Now
$13.83 Shipping
Condition: Used
Location: Pittsburg, United States
Carbide tipped cope and pattern set. 1 1/4 bore. Lots of carbide left. One chipper has a piece of carbide chipped out which a new one can be put in. I ... morehad to buy new cutters because I need some right then and could not wait If you want more info or better pics let me know. Shipping will be 10.95 to lower 48 states all others pay actual shipping cost.
$
113.75
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
The is a router bit adaptor for the Powermatic HD shapers. It will fit the#26 and 27 machines. Use your router bit profiles on a really heavy duty machine. ... moreThe adaptor will take 1/4" and 1/2" shanks. If you have the Powermatic#26 shaper that was made in Taiwan this will not work in your machine. You would need to change the quill assembly to the US version. There are no shipping charges on this item if shipped to any US address. I do ship internationally. Just email me your location and I will quote shipping to your country.
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Dundee, United States
$
199.99
Buy It Now
$39.99 Shipping
Condition: Used
Location: Grand Rapids, United States
Vintage Stanley Router-Shaper W/ Wooden CaseThis kit includes he router tools and cords, small woodworking tools, and a few manuals and vintage catalogues ... morefor Stanley tools, all in the original wooden case.Everything is in great condition!
$
75.00
Buy It Now
$9.45 Shipping
Condition: Used
Location: Palm Coast, United States
I came across a box of metal cutters mixed in with some other tools. The seven cutters look to me as if they are designed to go on a 1/2" spindle ... moreshaper used in woodworking. They are all designed to cut different molding profiles with the exception of one that would appear to be used to bore a hole. In the box was also a 1/2 shaft(4 1/2" long) that ends with a carbide cutter. You get all 8 Pieces. Picture 2 shows three cutters: from left to right they are marked: LS-16. LS-17, and LS-18, and MADE IN USA. Picture 3 shows three cutters: from left to right they are marked: LS-19. LS-26, and no markings. The first two are also marked MADE IN USA. Picture 4- there are no markings on the two cutters.
$
125.00
Buy It Now
$16.95 Shipping
Condition: Used
Location: Vancleave, United States
This Starrett level was acquired in a large lot of machinist tools after the original owner pased away.
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
M42 cobalt steel. 1/4" x 1/4" x 2-1/2" M42 square tool bits. High speed steel tool bits show exceptional results on mild steel, alloys and tools steels.
$
49.99
6d 14h 17m 41s
0 bids
$11.85 Shipping
Condition: Used
Location: Bowling Green, United States
Used(like new) Brown& Sharpe Dial Test Indicator 599-7033-5. Dial Test Indicators; Dial Graduation(Decimal Inch) 0.000050; Maximum Measurement(Decimal ... moreInch) 0.0080; Dial Reading: 0-4-0; Dial Diameter(Inch) 1-1/2; Minimum Measurement(Decimal Inch) 0.0000; Contact Point Length(Inch) 1/2
$
17.63
Buy It Now
Free Shipping
Condition: New
Location: China
4" 5" Diamond Turbo Grinding Wheel Cup Abrasive Grinder Disc for Granite Stone. 5" 125mm Diamond Grinding Wheel Cup Cutter Grinder for Hard Alloy 240# ... more320#. 5" 125mm Electroplated Cup Diamond Grinding Wheel Abrasive Tool for Hard Alloy.
$
16.99
Buy It Now
$6.95 Shipping
Condition: Used
Location: Berlin, United States
AS SHOWN
$
5300.00
Buy It Now
Condition: Used
Location: Piedmont, United States
G and E 24” Metal Shaper Gould and Eberhardt Universal Shaper With Vise. Prefer a local pick up or assist buyer with loading and shipping at buyers expense. ... moreAlso for sale locally. Probably have another g and e 32 inch available plus a smaller Steptoe and a much larger Rockford open side planer
$
14.00
Buy It Now
Condition: Used
Location: Saint Louis, United States
$
4.50
Buy It Now
$4.23 Shipping
Condition: New
Location: Fountaintown, United States
Replaces #9-111 part perfectly on collars used on Atlas Lathe and Shaper. Atlas 7" Shaper also uses 2 felt washers #9-111 and oil for lubrication. Replace ... morethose worn out felt washers on your 10 Atlas Lathe.
$
6899.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
Larger tube forming with roll changes. Gold Machinery Group. We’re conveniently located on the East Coast between Boston and New York. Capacity: 3mm, ... more4mm, 6mm, 8mm tubing. We will load your truck from our adjustable loading dock for free.
$
45.00
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Delta Rockwell Shaper. I’ll be the first to admit when I don’t know much about something. Shapers are one of them. I have a bunch a parts to them but ... moreI have never used one or even seen one assembled. These parts are part of a lot that I purchased
$
29.99
5d 15h 5m 19s
0 bids
$28.50 Shipping
Condition: Used
Location: Modesto, United States
It is in great lightly used condition with paperwork. I am not sure who the maker is.
$
89.00
Buy It Now
$13.00 Shipping
Condition: Used
Location: Palm Harbor, United States
Item is a Voorwood A1250A20 Shaper Head. Boxes may be missing or show signs of long shelf wear. This item is used but appears to be in overall good condition.
$
2332.80
Buy It Now
Free Shipping
Condition: New
Location: China
The Bulk-Man 3D QueenBee PRO CNC Machine is a linear rail upgrade based off the very popular WorkBee CNC Machine. There have been a few different ‘linear ... morerail upgrade’ designs over the years to suit the WorkBee, Ox and Lead CNC Machines.
$
9.40
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This is item no. 904-05-010-1646. The is the locking washer for the 1/2" shaper spindle on the Delta shapers. Without the tab on the washer the nut ... morecould work loose and then stand back! This may fit other makes also. The tab is under 1/16" wide and 1/16" long. These do wear out in time and have to be replaced. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. This washer will also work on the Walker Turner 700 series model 99PM2313 shaper. The Yates, and the Atlas shapers.
$
129.00
Buy It Now
Free Shipping
Condition: New
Location: Bayville, United States
Custom Aluminum Bevel Grinding Jig- used by beginners and experienced makers to grind clean bevels. Can adjust through a wide range of angles for different ... morebevel heights. Shallow bevel. Steep bevel.
$
139.00
Buy It Now
$39.00 Shipping
Condition: New
Location: Turkey
Belt Grinder D-2x72" Support Plate for Blade. Established two cases cylinder aircraft aluminum 2.12 conversion for sleeping bed policy manual 1 can use ... moreone of the most machines to make. great price.
$
25.00
Buy It Now
$18.10 Shipping
Condition: Open box
Location: Simi Valley, United States
These are very good quality locking swivel casters made by Latin Percussion. 4" overall height. These are much better quality than the similar Harbor ... moreFreight locking casters and they are less expensive!
$
125.00
Buy It Now
$12.95 Shipping
Condition: New – Open box
Location: Orlando, United States
3/4” x 9” Shaft for holding Shaper Cutters and Finger joint heads for Sharpening. Item might show blemishes on steel. Shipped with USPS Priority Mail.
$
49.00
Buy It Now
Free Shipping
Condition: Used
Location: Clarksville, United States
Multiple bead and cove profile cutter. Aluminum head. Replaceable knives. 4 1/2" O.D. 1 1/2" height, 1 1/4" bore. Will combine shipping.
$
3666.00
Buy It Now
Condition: Used
Location: Canada
CO-MATIC MACHINERY CO. LTD. MODEL No. M3"BABY FEEDER" POWER FEEDER FOR WOOD SHAPERS CO-MATIC M3"BABY FEEDER" LIGHT DUTY POWER FEEDER ... moreFOR USE WITH WOOD SHAPERS. 110- 120 VAC. 1.2A, 1/8 HP, VARIABLE SPEED 550- 3300 RPM. REVERSIBLE MOTOR. 3-WIRE POWER CORD. PULL-ON. ADJUSTABLE FEED SPEED CONTROL. 0- 40 ft/min FEED RATE. ROCKER REVERSE SWITCH. THREE POLYURETHANE ROLLERS. MOUNT AND STAND ASSEMBLY WITH TOOL FREE LOCKING ADJUSTMENTS- MOUNT BOLTS NOT INCLUDED. NO OWNER'S MANUAL OR PACKAGING. MADE IN TAIWAN. CLEAN BABY FEEDER USED IN GOOD WORKING ORDER- RUNS GOOD- GOOD ROLLERS- GOOD CONTROLS- GOOD MOUNT& POSITIONING ASSEMBLY- CHIPPED END ON DUST PORT. SEE PICTURE, PORT HAS NEVER BEEN OPENED AT HOUSING- SCRATCHES, SMUDGES& FINISH WEAR- NOT ETCHED- AGE UNKNOWN- NO INTERNATIONAL SHIPPING, SHIPPING TO LOWER 48 STATES ONLY BY UPS GROUND SERVICE- SOLD AS IS
$
5900.00
Buy It Now
Condition: Used
Location: Piedmont, United States
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 32" Strk 15HP Gould&Eberhardt 32" Heavy Duty SHAPER. T-Slotted Tbl, Universal V Ref# 153387 iammdna XSHAPE 32" GOULD& EBERHARDT UNIVERSAL SHAPER MODEL: 32" HEAVY DUTY. S/N: 6930A9, NEW: 1957 SPECIFIACTIONS: RAM STROKE LENGTH. 32" CUTTING SPEED RANGE(16) 7- 100 SPM. VERTICAL MOVEMENT OF HEAD. 9" HEAD FEED RATE(9) 001- 032. TABLE SIZE. 16"W x 32"L x 18"H. TABLE HORIZONTAL TRAVEL. 30-1/2" TABLE VERTICAL TRAVEL. 16" TABLE FEED RANGE(18) 010" 180" APPROXIMATE DIMENSIONS. 100" x 55" x 65"H. APPROXIMATE WEIGHT. 8.500 LBS. EQUIPPED WITH: HARDENED CHROMED RAM WAYS. T-SLOTTED TABLE. UNIVERSAL VISE. 15 HORSE POWER MAIN MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More Gould&Eberhardt Machines Click Here For More Shapers& Slotters- METAL SHAPERS. HORIZONTAL(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. I
$
955.95
Buy It Now
Free Shipping
Condition: New
Location: Bellingham, United States
Unlike a shaper, the G0528 has a sliding table feature where the table moves with the workpiece into the cutter. The split fence is easy to adjust and ... moreprovides full support along both sides of the workpiece.
$
24.50
Buy It Now
$7.75 Shipping
Condition: For parts or not working
Location: Foster, United States
BROWN& SHARPE 625 Planer Shaper Gauge Gage Mouse over images to see enlarged version Click to see supersized image Brown& Sharpe No. 625 Planer ... moreShaper Gauge. This quality user tool is invaluable for setting the height(or depth) of both shaper and milling cutters. The height is set by means of a micrometer or height gauge. Both the base and sliding peice have light previous owner markings. One is Le Lacheur 6379(quite small and acid etched? and the is Knott(engraved. Lightly) Please refer to the photos. They are an important part of the description. I have tried to include many views so you can get an accurate understanding of the age and condition of this item. Nice vintage user tool. I have no more room left to collect more"things" so I need to significantly reduce the volume of tools that have added up over the past 30 years. Please email if you have questions or require additional photos. T hanks for looking and good luck! Ref nr. 0091] Please note that I ship from an overseas APO address(additional details provided below) My Guarantees to You: Guaranteed Prompt Shipping: Your item will normally be shipped within 1 business day of your payment. I will email you if. For any reason, there is a delay. Guaranteed Authentic: Your item will be delivered to you as it has been shown and described in this listing. I personally photograph ad describe all of my items so what you see is what you get. Guaranteed Quality Packaging: I make every effort to carefully package your item in a way that ensures that you'll receive it in the same condition as described. Guaranteed Delivery: Your item will normally be shipped to you using traceable delivery methods. All US shipments are through the US Postal Service by USPS First Class or USPS Priority Mail. USPS shipments are often delivered within 5-7 business days. However. As I am shipping from an APO address(overseas military post office) please be aware that USPS delivery times of 10-14 business days are not unusual. Your understanding that I do not have
$
10.43
Buy It Now
$18.51 Shipping
Condition: New
Location: MAIDENHEAD, United Kingdom
8pc Wood Plug Cutter. Round cutter sizes: 6mm, 10mm, 13mm & 16mm. Four tooth cutter sizes: 13mm, 16mm, 19mm & 22mm. Fully hardened. Garden Tools. Building ... moreTools. DIY & Tools. PRODUCT DETAILS.
$
18.25
Buy It Now
Free Shipping
Condition: New
Location: China
The shear angle design makes them one of the simplest cutting tools on the market. -Used to make cork and hardwood stoppers. -Model: 8mm, 10mm, 12mm, ... more14mm, 15mm, 16mm, 18mm, 19mm20mm, 25mm, 30mm, 35mm, 40mm, (optional).
$
20.50
Buy It Now
$5.00 Shipping
Condition: New
Location: Freeland, United States
The shaft is knurled like the OEM handle to secure it into the hand wheel hole. ONE (1) aluminum profiled spinner handle and the shaft that it spins on. ... moreOnly the spinner handle and shaft are included.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
5 Pc 1 /8" x 1/8" x 2-1/2" M42 HSS square tool bits. High speed steel tool bits show exceptional results on mild steel, alloys and tools steels. Overall ... morelength: 2-1/2" long.
$
110.00
4d 16h 5m 19s
0 bids
$12.95 Shipping
Condition: Used
Location: Morganton, United States
Starrett no.98-12 precision machinist tool & die maker bubble level 12" usa. Level has 3 vials. This level is in excellent condition. Winning bidder will ... morebe very pleased with condition and quality of level. Bid with confidence check out my feedback. Only ships to lower 48 states.
$
35.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Decatur, United States
Manufacturer: Brown And Sharpe MFR Part# 625 Used. Comes as shown. Picture of actual item in its entirety.
$
149.99
Buy It Now
Free Shipping
Condition: Used
Location: San Ramon, United States
Rockwell DELTA Shaper 1/2" Spindle Assy in Nice Shape , needs Bearings though. Free shipping to all 50 states!!! Thanks, Steve
$
6500.00
Buy It Now
Condition: For parts or not working
Location: Warren, United States
Fellows The No. 4AGS Gear Shaper Machine Manual 1964 This Manual Includes: Procedure for Starting New Gear Shapers and includes a Blueprint The Versatility ... moreof this Gear Shaper with Manual Operation or any Degree of Automation makes it Ideal for Short Runs on Varied Jobs or for Long runs on Similar Parts SORRY NO RETURNS THIS IS SOLD AS IS! What you see is WHAT you GET! This Manual Has 69 Printed Pages. Year ssecond revised edition 1964 Copyright 1957 WE OFFER COMBINED SHIPPING SO PLEASE CHECK OUR OTHER ITEMS INCLUDING THE NO. 4AGS GEAR SHAPER WITH BLUE PRINT AND COMBINES SHIPPING TO SAVE.Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ef07f927c-0x107-
$
2340.00
Buy It Now
Free Shipping
Condition: New
Location: Bellingham, United States
This Ships Direct From The Factory. Please Allow 8 to 10 Days Delivery DOES NOT SHIP TO CALIFORNIA. LOUISIANA, MISSISSIPPI, TENNESSEE, MARYLAND, CONNECTICUT, ... moreRHODE ISLAND, OR MASSACHUSETTS W1674 2 HP Shaper Description: We designed this Shaper for maximum performance at an affordable cost. With 25% more power and 40% more weight than other shapers in its price range you can use larger cutters or stack multiple cutters to save time. The 3" spindle travel allows you to use the tall cutters or stack multiple cutters simultaneously. This gives you the ability to create more profile combinations and allows you to greatly reduce your time for tooling changes. By stacking multiple cutters you simply raise or lower the spindle for the next profile. This Shaper offers the best value on the market and comes with a 2 Year Warranty for your peace of mind. We have a limited supply of stock that is CSA certified. Please call for more details. As these are available upon request only. Shipping exceptions may apply. Specifications: Motor: 2 HP. 120/220V, Single-phase, Spindles: 1/2" and 3/4" Included) Spindle travel: 3" Table size: 24" wide x 21" deep, Stand: Cabinet style. Powder coated paint, Power cord size: 10' x 14 gauge, Heavy-duty miter gauge, Large precision ground cast iron table, All ball bearing construction, Prewired for 240V, Spindle speeds: 7.000& 10,000 RPM, Spindle openings: 1-1/4" 3-1/2" 5" Forward/reverse switch, Dust port size: 3" Footprint: 18-1/2" x 18-1/2" Approx. shipping weight: 293 lbs.
$
75.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
This manual is widely considered to be one of the best textbooks on shaper work available. It contains 333 pages. Suggested Unit Course in Shaper Work. ... moreHow to Oil the Shaper. How to Adjust the Shaper.
$
32.00
Buy It Now
$28.25 Shipping
Condition: Open box
Location: Simi Valley, United States
These are very good quality locking swivel casters made by Latin Percussion. 4" overall height. These are much better quality than the similar Harbor ... moreFreight locking casters and they are less expensive!
$
16.50
Buy It Now
Free Shipping
Condition: Used
Location: Algonquin, United States
HSS, 1/2" bore. In great condition. They don't make these anymore ! Closely view all item photos.
$
34.99
5d 8h 39m 24s
0 bids
$11.75 Shipping
Condition: Used
Location: Albuquerque, United States
For your Consideration is this Vintage Brown& Sharpe No. 625 Planer Shaper Gage. Brown& Sharpe Mfg. Co. Providence. R.I. USA. Some minor staining ... moreas pictured. This tool is in good used working condition and will be a nice addition to your collection. Please see the pictures and email with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB9.7-3533-5 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
$
99.99
Buy It Now
$9.45 Shipping
Condition: Used
Location: Cadiz, United States
Cutter is marked Finishing.
$
24.47
Buy It Now
$3.97 Shipping
Condition: Seller refurbished
Location: New York, United States
Delta 2 Speed Wood Shaper Model No. 43-355 Instruction Operators Maintenance Manual.
$
26.60
Buy It Now
$5.00 Shipping
Condition: New
Location: Freeland, United States
Replacement switch plate covers for your vintage Delta UNISAW or other Delta machines. HURRY! Delta Unisaw and Rockwell Unisaw plates are almost gone. ... moreSEE BELOW This sale is for a"new" switch plate cover any one of your pieces of vintage Delta shop equipment. The original switch plate covers were made from thin aluminum and were easily dented. Dinged, damaged, or lost. We have several styles of Delta and Delta Rockwell plates available. All are newly manufactured and better than the originals. All of these plates are made of stainless steel and have been carefully and painstakingly recreated from the dimensions of the original plates and from the original artwork. The switch plate blanks were laser cut from.030" thick 304 stainless steel before being carefully deburred and brush finished. Prior to the high quality screenprinting of the artwork. Four different Delta switch plate styles are currently offered: Item A" The black Delta UNISAW plate was used on all Delta table saws up to around 1945. When the plate was changed to include the Rockwell name. Only two pieces of this plate are left. Item B" The black Rockwell/ Delta UNISAW plate was used on all Delta table saws built after Rockwell acquired the Delta company somewhere around 1946. I believe the original part number for this Unisaw plate with the now added Rockwell name is 41687. Only three pieces of this plate are left. Item C" The black Delta Mfg. plate was used on early Delta woodworrking equipment. includung the Delta shapers, until sometime in the early 1940's. I believe the Delta part number for this black plate was 41685. Item D" The red Delta Mfg. plate was introduced around the 1941-1942 timeframe to differentiate from the black switch plate of the now very poplar Delta UNISAW. I believe the Delta part number for the red plate is 41686. IF YOU ORDER. YOU MUST SPECIFY(EITHER BY ITEM# OR BY DESCRIPTION) AS TO WHICH PLATE OR PLATES YOU WISH TO RECEIVE. YOU CAN DO THIS ON YOUR PAYPAL PAYMENT FORM. WHERE IT ALLOWS
$
5.02
4d 18h 5m 28s
0 bids
$8.09 Shipping
Condition: Used
Location: Wautoma, United States
AMT 3284C WOODWORKING SHAPER CUTTER. Don't know much about it. Seems sharp
$
7950.00
Buy It Now
Condition: Used
Location: Pawtucket, United States
MdM Mario di Maio 6-Station Tube Forming Machine with TIG Welder S/N: MDM-MAA23. Argon Arc Welding Unit. Gold International Machinery Corporation. We’re ... moreconveniently located on the East Coast between Boston and New York.
$
60.00
Buy It Now
$11.65 Shipping
Condition: Used
Location: Hopatcong, United States
DISSTON No.7 SAWS - RIP & CROSSCUT - 1896-1917 - Hand Sharpened. I have never had a better tuned saw in my life! Exceeded all expectations. YANKEE NORTH ... moreBROS. No. 2100 BRACE 12" – FINE USER CONDITION.
$
999.99
Buy It Now
Condition: Used
Location: Elysburg, United States
$
19.00
Buy It Now
$5.40 Shipping
Condition: Seller refurbished
Location: Merrimack, United States
This item is for one 3d printed high temp plastic handle (grey) and includes nothing else shown only for illustration purposes.
$
71.10
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: For checking, testing, and setup work Main level vial is graduated to 10 second accuracy (one division equals .0002" per foot) Additional cross ... morelevel enables the user to check side declinations Base is hand scraped for extreme accuracy Cast iron body Longitudinal with prismatic base Specification: 8'' Precision level Adjustable main vial 0.0002"/10" Size: 8'' Base with V-groove. With cross test vial. With insulating grip Accuracy: 0.0002"/10" Wooden case INCLUDED Quantity: 1 Package included: 1 X Precision Master Bar Level.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 In 

Former Listings  
 
SET OF EDGE PROFILE CORRUGATED BACK KNIVES MOLDER SHAPER W/TEMPLATE C19
Edge Profile Corrugated Back Knife Sets with Templates Runs in a standard corrugated back cutter head for a molder or shaper Overall Profile lengths: 2-1/8" 2" 1-3/4" 5/16" thick standard corrugated back molding knives All tool steel in our auction is high quality industrial grade WKW. DML, Weining or similar Most of the knives we have listed are in good condition and usable as is The sharpening templates are included for future dressing needs Good Condition No Reserve Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. Many sets of knives will fit in a medium flat rate box for $13.95 If you have purchased multiple items. Wait for a combined invoice. If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! Note! Auctions include only the templates ... morepictured.
3" & 2-1/2" BASE CAP MOLDER SHAPER CORRUGATED BACK PROFILE KNIVES W/TEMPLATE C3
Base Cap Profile Corrugated Back Knife Sets with Templates Runs in a standard corrugated back cutter head for a molder or shaper Overall Profile lengths: 3" 2-1/2" 5/16" thick standard corrugated back molding knives All tool steel in our auction is high quality industrial grade WKW. DML, Weining or similar Most of the knives we have listed are in good condition and usable as is The sharpening templates are included for future dressing needs Good Condition No Reserve Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. Many sets of knives will fit in a medium flat rate box for $13.95 If you have purchased multiple items. Wait for a combined invoice. If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! Note! Auctions include only the templates pictured.
Fellows Gear Shaper Cutter lot 20/30,20/40,5/10 Dp, 30 pa
Used but great condition. Fellows shaper cutter lot, 1) fellows 20/30 Dp 30 deg. Pa.077 wd 60 t 3.125 od. 1.250 bore 1) itw 20/40 Dp 30 deg. Pa.0525 wd 60t 3.00 od. 1.250 bore 1) phauter/maag 5/10 Dp 30deg. Pa.235 wd 10t 2.250 od.750 bore Free shipping. Posted with
Fellows Parts List 7 & 7A-Type High-Speed Gear Shaper (Inv.17949)
Fe llows Parts List for 7 and 7A-Type High-Speed Gear Shapers: You are bidding on A COPY of the manual shown in the photo. Loc.Printed.4270)Inv.17949) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international ... moremoney order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Rosette Cutter Head Lathe Shaper Custom 8" Dia
Rosette Cutter Head Lathe Shaper Custom 8" Dia· This is a custom designed. One-of-a-kind cutterhead· Designed to cut large diameter rosettes and small radius profiled wooden parts· Mounted on a lathe headstock or other type of 1-1/2" threaded spindle· Uses standard corrugated knife stock· Head diameter = 8" Runs 2 knives. Max width 3-1/4" with option for running 2 more perimeter knives 1-1/2" width· Wt = 19 lbs· Includes one set of miscellaneous knives as a sample· For the custom shop or plant with the need for specialty parts· Original price exceeded $2500· Postage includes careful packing and fast shipping· Excellent condition
CRAFTSMAN SHAPER / MOLDING HEAD # 9-3221 ATTACHMENT FOR TABLE SAW NOS? SEARS
THIS IS A VERY NICE. POSSIBLY NEW CRAFTSMAN SHAPER HEAD ATTACHMENT KIT. PART# 9-3221 I CAN SEE NO SIGN THIS HAS EVER BEEN USED AT ALL. CASE SHOWS SHELF WEAR. TOOL APPEARS TO BE NEW. INCLUDES SIX SETS OF CUTTING BLADES. ALL THE TOOLS I'M LISTING THIS WEEK ARE FROM A LOCAL ESTATE. UNLESS OTHERWISE STATED, THEY ARE ALL IN VERY GOOD TO EXCELLENT ORIGINAL CONDITION. MANY HAVE SPOTS OF LIGHT SURFACE RUST FROM OUR VIRGINIA HUMIDITY. PLEASE CHECK OUT MY OTHER ITEMS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
Starrett Number 599 Universal Planer And Shaper Gap Gage Machinist Tool
Selling this Starrett machinist planer and shaper universal height and gap gage number 599. It comes with all it's parts. There is some tarnish on one side of the plane but overall in great shape. It comes with the box which is missing one side as seen in the photo. Posted with
Wood Shaper - Delta 2 Speed Heavy Duty
This Shaper must be picked up in Wappingers Falls. NY 12590. 1.5 hours north of New York City. Please let me know if you have any questions! A high-speed production unit that handles five spindle sizes-1⁄2 to 1" Because of the wide range of shaper cutters it will accommodate. There’s practically no limit to the variety of cuts this Delta 2-Speed Shaper will produce. It will handle 1⁄ 2" 3⁄4" and 1" standard spindles. A 1⁄ 2" stub spindle, plus an extra long 3⁄ 4" spindle with 43⁄ 8" capacity under the nut. And, because it has two spindle speeds—7.000 and 10.000 rpm—it will handle practically any shaping operation. Including panel raising. Because of its great shaping versatility. This popular machine is well suited for cabinet shops. Furniture factories, specialty shops. School shops, sash and door companies ... moreand similar installations.
Ammco Shaper Vise
Here is a Ammco Shaper Vise in great condition. Everything works freely no problems,
1/2" sq VISE or CRANK HANDLE shaper milling machine WILLIAMS USA # 2 special
Good Used Machine Crank or Vise Handle Williams USA 1/2" square#2 Special May have minor scuffs and handling marks Powered by The free listing tool. List your items fast and easy and manage your active items.
SHAPER CUTTER BITS 1/2 INCH ARBOR CRAFTSMAN 3025 1/4 TOUNGE AND GROVE
SHAPER CUTTER BITS 1/2 INCH ARBOR CRAFTSMAN 3025 1/4 TOUNGE AND GROVE CONDITION: USED– Normal Wear and Tear– See Pictures Good Working Condition: Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Please e-mail with questions Will Combine shipping
SHAPER CUTTER BITS 1/2 INCH ARBOR KLINE KL-21 AND KL-22
SHAPER CUTTER BITS 1/2 INCH ARBOR KLINE KL-21 AND KL-22 CONDITION: USED– Normal Wear and Tear– See Pictures Good Working Condition: Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Please e-mail with questions Will Combine shipping
Power Down Feed Attachment for Hendey 12 inch Shaper
Removed from.And fits 12 inch Hendey Shaper I used to own long ago.Attachment provides metered and consistent feeding of the tool post/compound into the work via the toolpost screw. Very handy for cutting angles under power and turning corners with your cut, while leaving a workpiece set up and clamped down. Selling used,as-is. Posted with
1/2" Shaper Cutters: 14 with extras
Most of these don't appear to have been used. What you see is what you get.
Shopsmith Mark V 1/2" Shaper Collar Set NIB #505604
Shopsmith Mark V 1/2" Shaper Collar Set NIB#505604. It shows little signs of use. I also have several Cutters& arbors on other auctions) These are not available from the factory anymore. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
ADC Sound Shaper SS-412X Stereo Frequency Equalizer and Spectrum Analyser
ADC Sound Shaper SS-412X Stereo Frequency Equalizer and Spectrum Analyser is excellent working condition. Equalizer is used but looks in like new condition and all functions work as they should.
Replacement Crank Handle Mill Shaper Table Saw Jointer Grinder 13/16" ID / Bore
Description: Nice 4 1/4" Cast Iron/ Steel Machine Replacement Crank Handle that weighes 2 1/2 lbs. for a Mill Grinder Table Saw Jointer or Wood or Metal Lathe Tailstock. Has a 13/16" ID/Bore(actual is.831) with a 1/8" keyway and a solid tight large size turn knob handle. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping ... morethan I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
2" R Roundover w/ 2" Flute & 1/2" Shank Shaper Cutter Carbide
ONE 2" R ROUNDOVER 2" FLUTE 1/2" SHANK SHAPER CUTTER You will receive 1 USED 2" R ROUNDOVER w/ 2" FLUTE& 1/2" SHANK SHAPER CUTTER. It is in Used but Very GOOD Condition.The Carbide knives are in almost New Condition.It comes in the box in was bought in.It has number 403-5960( this might not be Box it came in)Not sure who made it but Byrom International corp.Chardon,Ohio 44024 is stamped on box.It measures 3 1/2" wide x 1 3/4" x 4 5/8" tall. Shipping is by $7.50 by Priority Small Flat Rate Mail.Please PAY within 4 Days of Auctions End or a Non-Paying Bidder form will be Filled with Ebay.E-mail with any Questions. NO International Shipping. Have othe SHAPER Cutter`s on auction so I Will Combine Shipping but it might go Parcel Post Mail then just e-mail for combine Shipping Charges.
1/2" Half Round & Reversible Roman Ogee 2 1/2" Shaper Cutters
ONE 1/2" HALF ROUND SHAPER CUTTER with 3/4" Bore& Carbide knives ONE REVERSIBLE SLIDE& RAIL ROMAN OGEE 2 1/2" SHAPER CUTTER with 1/2" Bore& Carbide Knives You will receive 1 SHAPER CUTTER 1/2" Half Round 3/4" Bore with Carbide knives. It is USED but in VERY GOOD Condition.The carbide Knives look in New condition.The no. 40-925 is stamped on one side. You will also receive 1 REVERSIBLE SLIDE& RAIL ROMAN OGEE 2 1/2" with 1/2" BORE SHAPER CUTTER& Carbide knives. It is missing some pieces acording to my father.3 shims& 2 T Bushings.The two remaining pieces are Used but in GOOD Condition.THe carbide knives are in Great condition& look almost New. Shipping is by $7.50 by Priority Small Flat Rate Mail.Please PAY within 4 Days of Auctions End or a Non-Paying Bidder form will be Filled ... morewith Ebay.E-mail with any Questions. NO International Shipping. Have othe SHAPER Cutter`s on auction so I Will Combine Shipping but it might go Parcel Post Mail then just e-mail for combine Shipping Charges.
Lot 894 Beaded Face Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beaded face frame moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If ... moreyou buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13f2a15e865-0xfa-
Lot 882 Brick Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom brick moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy ... moreseveral lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f2a15e877-0xfe-
Lot 887 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice casing moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy ... moreseveral lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with
Lot 885 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice symmetrical pilaster moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f2a15e870-0x106-
Lot 877 Hand Rail Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for versatile bullnose or handrail cap moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated ... morein listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 857 Chair Rail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom chair rail or panel moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f2a15e980-0xfc-
Lot 874 Fluted Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom fluted casing moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f2a15eab0-0xf1-
Lot 870 Reeded Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom reeded moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you ... morebuy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with
Lot 849 Hand Rail Set Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom hand rail/safety rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with
FORWARD & REVERSE SWITCH FROM JET SHAPER
FORWARD& REVERSE SWITCH FROM JET SHAPER This is a Forward& Revesing Switch From a JET Shaper. Comes as shown. Ships at 20 lbs. Please email with any questions BEFORE you bid or order. We try to describe each item as accurately as possible. And want the bidder to be confident that the item is what they want. Our feedback record proves that we are trusted. We treat folks right. You can email your questions but we suggest giving us a call on our TOLL FREE TOOL LINE. 1-800-783-4766. Our business hours are 8:30 to 5:30 Monday through Friday. Open til 9:30 Thursday. Saturday 8:00 to 4:00 Eastern Time. Closed Sunday and Holidays. FOUNDER. OWNER& CEO FRED SAYS. We are a corner store with a global customer base. We have sent tools all over the globe. But you can still come into to our store and browze for hours! We don't just sell ... moretools.we use them. We love them. We live them. We have sawdust in the cuffs of our sleeves and shop rags in our britches pockets. We get into. On to and all over the machines and equipment we buy. We don't pretend to know everything about tools. But we love to learn and we put what we learn into everything we do. We are tool guys. Pretty much says it all. We welcome you the THE WORLD'S TOOL SUPERMARKET! We never charge handling charges. When we ship via UPS. We use* RECYCLED BOXES& PACKING* And charge only what UPS charges us. When applicable(if it is the best price for the buyer) we will ship U S P S. We get you the absolute best prices for truck freight shipment on larger items. Shipping Charges are NOT refundable. There are NO RETURNS ON GASOLINE POWERED ITEMS for any reason. If you bid on a gas powered item.you keep it. There will be no refunds or returns accepted. If you bid on a machine or skidded item. And wish to return it.there will be a 10% restock charge. You will also pay the return freight. BIG NOTE* If you have your own UPS account. We will gladly ship on your account. Just let us know ahead of time. NOTE: PA Residents must pay 6% sales tax. If
ADC Sound Shaper Eleven 10-band audio equalizer MINT
ADC Sound Shaper Eleven This is the CLEANEST equalizer you'll ever find. The lights all work. The sliders move without audible scratchiness, the face looks like new, and the sound is clean, Clean, CLEAN! The only flaw I've been able to find at all is that the pots that control the center"level" LEDs are the slightest bit mismatched. The left side needs to a slightly higher setting than the right to have the same level on the active display. This is probably an issue that can be solved with a shot of Radio Shack electronics cleaner to the level pots. The active controls(the frequency-level adjusters) however work perfectly. There is NO RESERVE on this auction. There is no"buy it now" price. There is no international shipping. Read my feedback and bid with confidence.
LOT of MISC PARALLELS precision machinist set up tools mill planer shaper table
lot of good used parallels no mfg marked various sizes- some pairs will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Freud carbide cove raised panel shaper cutter
This is a used Freud carbide tipped shaper cutter. Cove raised panel. Used and appears to have been sharpened at some point. 3/4" bore. Free shipping to the lower 48 states. PayPal Only. No returns.
Bosch carbide door edge shaper cutter
This is a used Bosch carbide tipped shaper cutter. Cabinet door edge pattern. Used. But in great shape. 3/4" bore. Free shipping to the lower 48 states. PayPal Only. No returns.
Powermatic Shaper; Model #: 26; 5HP; 3PH
Powermatic shaper model#26 5hp/3ph with feeder 3ph variable speed
vintage adc sound shaper three ic paragraphic equilizer rare and excelent cond
EXCELENT CONDITION WORKING AND LOOKING THE BEST IVE EVER OWNED.AND I HAVE 6 DIFFERENT EQUILIZERS,WOULDNT BE SELLING IT EXCEPT FOR DIVORCE AND LAWYER BILLS,ALOT OF AUDIOPHILES DONT BELIEVE IN EQUILIZERS,BUT MATCHING MUSIC AND SPEAKERS AND EQUIPMENT,IF YOU DONT USE AN EQUILIZER YOU CANT BE VERY VERSATILE WITH YOUR MUSIC, THIS UNIT DOES JUST ABOUT IT ALL, IT HAS MORE FEATURES THAN ANY OTHER EQUILIZER IVE SEEN AND SOUNDS GREAT THE HANDELING IS FOR INSURANCE AND SIGNATURE Powered by The free listing tool. List your items fast and easy and manage your active items.
USMC Marine Corp Hat / Cap Cover Block Storage Shaper : TruShape
The two pieces in the picture is what you will get.
Vintage Machinist Browne & Sharpe No. 625 Planer Shaper Gage w/ box
Here is a Vintage Machinist Browne& Sharpe No. 625 Planer Shaper Gage w/ box. Has initials engraved in the piece. Could use a cleaning. Please email any questions prior to bidding. Take a look at the other inspection and measuring items we will have up for auction. We will combine multiples purchases when possible.
Fellows High Speed Gear Shaper Model 75A
Fellows High Speed Gear Shaper Model 75A Fellows High Speed Gear Shaper Ref.33-192 Model No. 75A Serial No. 19204 Maximum Pitch Diameter. External: 7" Maximum Face Width. External: 2" Maximum Pitch. Spur Gears: 5/7 Solid Cutter Spindle Equipped With: Miscellaneous Gears Spur Guide Coolant 2 HP Motor Drive 230/460/3/60 Approximate Net Weight: 3.300 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. ... moreWe ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
Cordless Mini Nail Decorator Shaper Rotary Nail Grooming Kit Manicure Pedicure
Product Features: Cordless mini nail decorator rotary nail grooming kit, Designed for both pedicures and manicures, Essential beauty nail polish tool that every lady needs! Achieve perfect results within minutes, Buffs your nails to a natural finish, Smooth. Shapes and contours your nails, Keeps cuticles neat and cleans, 5 Interchangeable Tips: Buffing tool, Emery tool, Shaping tool, Fine shaping tool, Cuticle pusher, Powered by 2 x AA batteries(Battery not included) Material: plastic + alloy, Color: mainly white with purple as shown in the picture, Net Weight: 73.2g/ 2.58oz, Size: 164 x 30 x 30mm/ 6.46 x 1.18 x 1.18in, Package Contents: 1 x Nail Decorator, 1 x Pouch, 5 x Tips,
VINTAGE PRATT WHITNEY GAGE, PLANER AND SHAPER GAGE, BOX, NICE
VINTAGE PRATT& WHITNEY PLANER AND SHAPER GAGE AND BOX PLANER GAGE 900 Nice condition
STARRETT NO. 246 PLANER SHAPER GAGE GAUGE SURFACE MACHINIST TOOLS *Y
STARRETT NO. 246 PLANER SHAPER GAGE GAUGE SURFACE MACHINIST TOOLS*Y Condition/I n fo: Some rust stains otherwise in good condition. The scale/rule in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here ... moreto get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
Atlas Metal Shaper, Milling Machine Motor.
Atlas Metal Shaper motor. Info is on tag In second picture. Shipping may vary depending on location. Posted with
Atlas Metal Shaper S7-16AX Ram Lever Assembly
Atlas Metal Shaper S7-16AX Ram Lever Assembly. Consists S7-26 block with stud and bushings. Ram lever with plate S7-16A. And link with bushings S7-17. Shipping may be more or less depending on location.
Atlas Metal Shaper Motor Base And Bracket. S7-74, S7-108a
Atlas Metal shaper motor base S7-108A. And bracket S7-74. Posted with
7 Inch Atlas Shaper Block and Pin
Atlas shaper block and pin model# S7-14A
7 Inch Atlas Shaper Screw Nut S7-15
7 inch atlas shaper S7-15 nut. Good condition
7 Inch Atlas Shaper Clamp Handle S7-28h
7 Inch Atlas Shaper Clamp Handle S7-28h
Vintage Shaper Skunk Dice Game Copyright 1953
This a Vintage Skunk Dice Game. Copyright 1953, by Shaper, maker of Stadium Checkers and Cootie. Game appears unused.
ADC Sound Shaper One Ten Stereo Frequency Equalizer+VG Condition+FREE SHIPPING!
Super clean. little use. some dust still on top as pictured.Functions properly. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f397a2b10-0xfb-
Large shaper molder Cutter Head 1 3/4" bore 5 7/8" tall 6 3/8" dia. 8 knives
For Sale: Large shaper. Molder cutter head In good shape. Just has shelfware. Still very sharp. 5 7/8" tall 6 3/8" outter diameter. 1 3/4" bore Has 8 knives on the cutter Please take a good look at the pictures for cutting pattern. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. ... moreAll items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me
Orion Surfboard Vintage SIGNED Greg Geiselman and # PRO SURFFER Shaper 6'4"
Orion Surfboards is another one of our East coast companies but. With a twist. Greg Geiselman shaper for Orion Surfboards stemmed out of the A.S.P. East. He was in the A.S.P. for 7 years getting as high as 4th in the year end rankings; surfing against many Pro s still in the tour. Including Kelly Slater. Greg shaped for two other companies before he started shaping for Orion Surfboards in 85. When it comes to Orion Surfboards your know your getting a board made like the pro s because your getting a board made by a pro. We focus in on quality. Not necessarily quantity, though we shape a lot of boards and I get a ton of customs. Greg Geiselman. Good shape. 3 fins. Very light. Signed and numberd by Greg Geiselman himself#4067.
Moak No. 7 Woodworking shaper, Wood shaper, 1" spindle.
Moak No. 7 single spindle shaper. Ser. No. 5852 Year. About 1962 1" spindle Length of spindle above table 4-1/2" Vertical adjustment on spindle 3-1/2" Table size 22"x42" Spindle speed 8350 rpm 2 hp. 3Phase, 220/440 volt, Currenty wired for 220volt. 700lbs I removed the old paint with a needle scaler. Primed and repainted. The top was surface ground by Simcox Grinding in Brimfield.Ohio The motor was cleaned. Baked out, checked and new bearings installed by Hunnel Electric Motor repair in Akron, Ohio The spindle was disassembled. Bearings washed out,inspected and reassembled by Hunnel Electric as well. The drive belt was replaced while the spindle was disassembled. It is a"Panther" flat belt from Musson Rubber in Akron. Ohio. I started this project several years ago. I then acquired another Moak No. 7 with ... morethe larger top in mint condition. I was able to put that one right into service. These Moaks are rock solid. I was really surprised at the performance compared to my Powermatic or Delta shaper Buyer pays freight. Figure on 800lbs. Shipping from a business dock at Zip 44311. Akron, Ohio. Pickup is also fine. I will band securely to suitable pallet and strech film for shipping. I cannot quote shipping cost in advance of auction end. I can set up shipping and add final shipping cost to invoice. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f3c635ca3-0xfd-
Delta Shaper HD Fence 43-830 must see/hard to find/vintage
Fence appears to have had very little use. See pictures of actual item. Item sold as is where is. No warranty. No guarantee. What you see in pictures is what you get. NO RETURNS, NO REFUNDS. Posted with
WOW WARCRAFT MINIATURES CORE MINI MOJO SHAPER OJO'MAN 2
WOW WARCRAFT MINIATURES CORE MINI MOJO SHAPER OJO'MAN 2 World of Warcraft Miniatures: Core Set Miniature Figure(s) with Sealed Action Bar Cards! All minis are sealed in their original plasitc. All minis are in mint/unplayed condition! The Card Castle* YOUR FIVE STAR GUARANTEE* It is very important to us that you are 100% satisfied with your purchase from the Card Castle- so we offer you our personal 5-Star Guarantee! If anything about the transaction could have been improved. Or if there are any problems at all with your order, please contact us immediately, and we guarantee we can make it right for you! When you give us 5 Stars on all our feedback ratings. This helps us keep our costs low and we can pass on the savings to you! If there is anything about the transaction that would make you give us less than the full 5 stars please let ... moreus know right away! We appreciate your feedback! SHIPPING We ship all items quickly and securly. Worldwide! Shipping costs for this item are posted below. We will combine shipping charges for multiple items won, to get you the best deal possible! Please email us if you are unsure what the shipping charges will be! We typically ship out our orders within 24 hours of receiving payment. SALES TAX We charge a 6.0% sales tax on all purchases made in the State of Connecticut. United States. QUESTIONS? We welcome any and all questions about this item! Please feel free to email us with any questions! Thank you so much for shopping with The Card Castle! gsrx_vers_444(GS 6.2(444)
Lot 905 Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for delicate custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 903 Elegant Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for elegant custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 902 Reeded Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice custom reeded casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
THREE 1-2-3 BLOCKS mill planer shaper drill milling machine holder ARNETT TOOL
3 good used setup blocks Arnett tool approx 1 x 2 x 3 will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $11.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
FELLOWS MODEL 10-4 GEAR SHAPER, 10-2
FELLOWS MODEL 10-4 GEAR SHAPER General Specifications Max. external& internal pitch dia. 10" Max. face width. External 4" Max. diametral pitch. Spur 4 DP Max. diametral pitch. Helical 5 DP Bore through work spindle 5.875" Spindle diameter 3.543" Distance between work table and cutter spindle 10" Max. helix angle with standard guides 45 Deg. Max. OD of fixture 19" Speeds 300-850 SPM Dimensions 119"L x 97"H x 53"D Approx. weight 11.000 LBS Motor Specifications Not Available Equipped With Standard straight spur guide Cutter positioning Serial Number 34787 Year 1975 Location PROSPECT HTS. IL
LOT OF 9 - 1/2" SHAPER CUTTERS, 2 - 5/16" DIA. PINS & 1-3/8" WIDE SPACER IN BOX
LOT OF 9- 1/2" SHAPER CUTTERS. 2- 5/16" DIA. PINS& 1- 3/8" WIDE SPACER IN BOX WITH GOLF PAINTING ALL THESE CUTTERS FIT A HALF INCH SPINDLE. THERE IS SOME LIGHT RUST IN SPOTS ON THE BODY BUT IS MAINLY INSIDE HOLE ON SOME OF THE CUTTERS.`LIGHT RUST ON PINS ALSO. SPACER DOES SHOW USE BUT THE CUTTERS LOOK UNUSED. ALL THE CUTTERS ARE 1 INCH THICK WITH BLADES 1/2 INCH LONG. THESE COME IN A CORK LINED BOX WITH A GOLF PAINTING ON TOP. ALL LOOKS TO BE IN GREAT WORKING CONDITION. WE DO COMBINE SHIPPING. PAYMENTS ACCEPTED USING PAYPAL.
SEARS CRAFTSMAN 113.239201 WOOD SHAPER Cast Iron Bed Heavy Duty Trim TOOL
Up for auction is a Craftsman model 113.239201 shaper. Is large and heavy. Works fine, and shaper bit height is adjustable. In what I would call VG used condition, is certainly good- no damage of any kind, and with some uniform‘rust staining’ on unpainted cast iron. Is shippable by parcel post, will have to ship in 2 boxes due to weight limitations, and of course LOCAL PICKUP is always welcomed. Winning bidder in 48 states to pay SHIPPING COST, Check out my other VINTAGE AUCTIONS. Now for the LEGAL STUFF- Selling strictly as is. And guaranteed to be as described and as photographed(and will be well packed for shipment) and will of course combine items if possible to save on shipping costs. In fairness to all bidders I reserve the right to void auctions and relist item(s) if Ebay has technical problems which do not allow bidding within the ... morelast hour of any auction(which very rarely happens! By bidding on this item you are agreeing to these terms Please check my feedback and bid with confidence, I describe items as accurately as possible, post plenty of photos of the actual item you are bidding on, never charge a handling fee and rarely charge for packing materials(only charge for very large and/or heavy items that require extra packaging materials) Purchase price cheerfully refunded if not as described and photographed. PAYMENT TERMS: BUYER TO CONTACT ME within 2 days of auction close, please let me know how you would like to pay, any shipping details I should know, etc. PAYMENT to be received within 4 days– FOUR days- of auction's close(unless other arrangements are made) International bidders NOTE that int’l shipments will be declared at full value. Check out my other VINTAGE& ANTIQUE AUCTIONS, and Thanks for looking!
Brown & Sharpe 624 Planer and Shaper Guage
Brown& Sharpe 599-624-3 Planner and Shaper Gage US made Base and slide are hardened and ground steel forgings Complete with case