In 
 
Order by: 
Available to: 
Price: 
 - 
$
42.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
Logan Lathe LA 12 Style Ball Bearing Thread Dial. Our version of the Logan Lathe LA 12 thread chasing dial. This new version of thread dial runs on 2 ... moresealed ball bearings with a carbon steel shaft. Both dial and gear are press fit as per original.
$
21.90
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
Logan Lathe 11" Model 920 etc. Spindle Wedge Block. The chuck is removed by placing a wrench on a jaw and turning it off, or your preferred way. With ... moreminimal pressure, the lock will slip in place. The spindle is then rotated allowing the block to wedge in place.
$
18.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
For Logan 11"-14" Lathe 2-1/4" x 8TPI Spindle. Logan Lathe Fits Models Fits Logan 11" through 14" with 2.25" x 8TPI spindle nose. 3D printed Standard ... more2.25 x 8 spindle guards, Protects your spindle thread when working on lathe.
$
25.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
Logan 9,10,11 Z Axis Dial Mount. This indicator mount is made from a durable 3D printed plastic eliminating the chance of damaging the ways on your lathe. ... moreThe dial is locked by a 8/32” thumb screw to prevent over tightening and distorting your dial barrel.
$
54.99
Buy It Now
Free Shipping
Condition: Used
Location: Merced, United States
Original Craftsman Lathe Threading Tool 2198 fits Craftsman Logan South Bend. Excellent condition See pics for up close details and measurements! TLBXCP
$
250.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: Menlo Park, United States
Includes the gear cover bracket as shown.
$
75.00
Buy It Now
$13.85 Shipping
Condition: Used
Location: North Tonawanda, United States
Very Nice- Original Logan apron lock nut assembly for a Logan 10" Model 820 lathe. Bolt is 2" to the shoulder. In very fine condition. As shown. ... moreAlways combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
185.00
Buy It Now
$18.91 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
64.95
Buy It Now
$9.75 Shipping
Condition: New
Location: Indianapolis, United States
Z-axis dial indicator clamp for South Bend 9" and 10K(10" lathes. Will also work on LOGAN model 820 and model 200 Lathes. CLAMP ONLY! THE DIAL ... moreINDICATOR IS NOT INCLUDED. FOR CLAMP WITH DIAL INDICATOR GO TO: http:cgi.ebay.com/South-Bend-lathe-dial-indicator-and-clamp-9-10K-260685415126?pt=LH_DefaultDomain_0&hash=item3cb20fc2d6 Gauge clamp allows for precision indication of the carriage location(Z axis) on South Bend Lathes. Included: Billet machined gage clamp. Polished 6061-T6 aluminum, precision hinge, and wing screw Instruction sheet Works on either the left or right side of the carriage. Gauge is easily repositioned with sturdy wing screw(no need to reach for an Allen wrench) All hardware stainless steel Polished aluminum will not mar ways. The recommended dial gauge is Travers Tool 57-029-999(dial body is The clamp will also work with some other lug-back style dial gauges. Photos show zeroing procedure. FREE SHIPPING! Limited time only) Comments from customers who bought this exact item: great tool. fast shipping. This seller went the extra mile. and the product is A number one! Very Nice. Excellent item. Lathe is NOT included) Shipping weight is 1 lbs. 8-5/8"x5-3/8"x1-5/8" box. Indiana Residents Must Pay 7% Sales Tax US customers only.
$
150.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Forward reverse gear handle assembly. Came off a 4TLC 700A but should fit Model 200 and most other 10" Logan Wards lathes. You can see it has been ... morewell lubricated. There are no chipped or broken teeth and I could not see any excessive wear. It is greasy. Oily, has paint chipped off and might have some dirt, dust, and cobwebs. Not new or mint but good usable shape. I'm also including the lock and 2 screws. Shipped Priority Med. Flat Rate Box with delivery confirmation for $12.00 to the lower 48. On Feb-03-13 at 17:07:00 PST. Seller added the following information:
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Glendale, United States
TAILSTOCK TURRET#2 MT SHANK ATLAS CRAFTSMAN 9-12 LATHE TURRET SPINS EASILY EXCELLENT CONDITION. THIS WILL BE SHIPPED MEDIUM FLAT RATE BOX OR PRIORITY ... moreMAIL WHICHEVER IS CHEAPER DEPENDING WHERE YOUR LOCATED. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
$
25.00
Buy It Now
Free Shipping
Condition: New
Location: Yreka, United States
Pair of new rubber bushings. Underdrive machines take four of them.
$
21.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Winnetka, United States
Untitled Document Free. Fast Shipping Every Business Day! Powermatic/Logan 14" Metal Lathe Instructions and Parts Manual Manual Description: Number ... moreof Pages: 56 This is a reproduction. Not a photocopy, of an original Powermatic Logan 14" Metal Lathe Maintenance Instructions and Parts Manual. This manual contains information on installation, leveling, operating instructions, lubrication, adjustments, trouble shooting, and a complete set of explosive view diagrams of all the parts. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
42.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This is a 3D plastic printed gear stack. While not a perfect the 1:1.27 ratio, when used with a 8TPI lead screw, it's 1.26984 ratio gives a margin of ... moreerror of. 0025" per foot. Gear depth : 0.4375".
$
29.75
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This AXA QCTP dial indicator holder is beefy enough to prevent flex and hold the indicator solid for a more accurate reading.
$
28.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This Nose protector will fit all lathes leBlond, Logan, Clausing, etc. Our version of an L-0 L0 nose protector. This protector is made with a crush-resistant ... moreinfill.
$
1950.00
Buy It Now
Condition: Used
Location: Orange, United States
$
9.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
125.00
Buy It Now
$88.34 Shipping
Condition: Used
Location: Santa Cruz, United States
Lever Double Cross Slide 10" Logan Lathe Production Tool Post in very good condition. Works great as a double cuttoff tool holder etc. May fit other ... morelathes but it was used on a Logan 10" Please ask if you have questions. Thanks for looking.
$
49.99
Buy It Now
$8.30 Shipping
Condition: Used
Location: Lakeside, United States
Excellent Condition- Original Logan 16 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" ... morethick. Teeth are all in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
150.00
Buy It Now
$18.00 Shipping
Condition: Used
Location: Bloomfield, United States
Up for AUCTION is the following item 1- Logan 10" Lathe Model 200 PART as follows- Reverse Tumbler Assembly in good working order. I am currently ... moreparting out a Logan 10" Model 200 lathe unit was in good working order when I took apart. Please check my STORE for other listing. We will ship for discounted freight rates on multiple item winners. Please email any question before bidding if you have them I will respond ASAP! ALL International Packages MUST ship PRIORITY MAIL INSURED no exceptions. Powered by
$
44.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
Is your screw worn?.
$
43.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
5" handwheel For 10" Logan Lathe Apron in very good condition. 1/2" bore with keyway. Thanks for looking. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1449fc2d730-0xe9-
$
160.00
Buy It Now
$30.00 Shipping
Condition: Used
Location: Bloomfield, United States
LOTS OF AUCTIONS ONLINE NOW! Brand Logan Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ... moreebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
$
79.00
Buy It Now
$15.94 Shipping
Condition: Used
Location: Lakeside, United States
Both vial bubbles okay.
$
29.95
Buy It Now
$7.95 Shipping
Condition: Used
Location: Danville, United States
Very Nice - MT2 spur center. MT2 shank is 3" long. In fine order, all as shown.
$
45.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
85.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan LatheThe screw is a little stripped. I still holds the ball crank fine. If it becomes an issue down the road it was would easy enough to turn down ... moreand make the threads smaller
$
25.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This Nose protector will fit all lathes leBlond, Logan, Clausing etc. Our version of an L-00 L00 nose protector. This protector is made with a crush resistant ... moreinfill.
$
45.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This 52/44 tooth gear is bushed with a 1/2" oilite bearing for long life. am not sure of all the correct settings for the Atlas/Craftsman lathe, so we ... moreare working on a PDF for the correct usage. We use Sheldon, and Logan lathes and.
$
21.90
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
Logan Lathe 9" Model 400,1400,9B Spindle Wedge Block. The chuck is removed by placing a wrench on a jaw and turning it off, or your preferred way. With ... moreminimal pressure, the lock will slip in place.
$
30.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
This Nose protector will fit all lathes leBlond, Logan, Clausing etc. L1 Spindle Nose Protector. This protector is made with a crush resistant infill. ... moreOur version of an L-1 L1 nose protector.
$
15.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: North Tonawanda, United States
Bent Tail Lathe Dog 1/2 Hole South Bend Atlas Logan Craftsman.
$
50.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
Logan Lathe 10" & 11" Cross Slide Feed Nut LA-173 or LP-1094. New Cross Slide Feed Nut for Logan 10" & 11" Lathes S/N 17151 and earlier.
$
59.99
Buy It Now
$22.33 Shipping
Condition: Used
Location: Temecula, United States
LOGAN LATHE Housing MOTOR MOUNT COUNTERSHAFT BRACKET This item has been broken in four spots and has been brazed together. It is rather crude looking ... morebut seems strong. Comes as shown.
$
90.00
Buy It Now
$13.85 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
69.00
Buy It Now
Free Shipping
Condition: Used
Location: Nampa, United States
Logan Lathe Threading Change Gear 7/16 Thick 5/8 Bore 72 Tooth Lead Screw. Logan part no. LA-214, no broken or chipped teeth, in very good condition.
$
69.99
Buy It Now
Condition: Used
Location: Temecula, United States
Logan Metal Lathe. 43" Bed and Rack Fair Shape Item shows normal wear and tear. There are some marks, nicks, and wear, but overall lathe bed is in fair ... morecondition. One ding area near the headstock, as shown in pics. Pick up only or buyer to arrange all shipping arrangements. 100# naked. zip is 92591. Comes as shown. LISTING IS FOR LATHE BED and RACK
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: Bakersfield, United States
$
9.50
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
3D printed Standard 1 1/2 x 8 tpi spindle guards, Protects your spindle thread when working on lathe. 1-1/2 x 8 Spindle Thread Protector. These 3D printed ... moreparts are amazingly strong and fit 1 1/2 x 8 spindles.
$
50.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
New Cross Slide Feed Nut for Logan 11" Lathes.
$
50.00
Buy It Now
$16.89 Shipping
Condition: Used
Location: Erie, United States
CHECK DIMS. 39 3/8 O/A LENGTH SEE PIC FOR L SCREW LENGTH. GOOD THREAD WITH MINIMAL WEAR IN "HIGH USE AREA". 7/16-14 THREAD. LARGE DIA. AT HEAD END IS ... more2" 1.996 WITH STEP DOWN TO.
$
12.95
Buy It Now
$5.95 Shipping
Condition: Used
Location: Danville, United States
All in fine order, as shown.
$
24.95
Buy It Now
$9.25 Shipping
Condition: Used
Location: Waterford, United States
Removed from a Logan model 200. 10" lathe. Comes as shown.
$
24.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
99.95
Buy It Now
$21.52 Shipping
Condition: Used
Location: Youngstown, United States
$
20.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Rochester, United States
Southbend Lathe 9"10K 3/8sq Wrench Toolpost Carriage Logan Atlas Craftsman.1pc of my choice for $20 free shipping no pick and choose. Thanks
$
19.99
11h 25m 16s
0 bids
Condition: Used
Location: Hatboro, United States
$
55.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan LatheI used ground pins to measure the wear. You can see the wear or lack of by seeing the variations or lack of variations in the measurements
$
14.35
Buy It Now
$5.40 Shipping
Condition: New
Location: Merrimack, United States
South Bend, Logan, Atlas, Sheldon CXA larger Aloris style QCTP Dial Indicator Mount, Dual Position. Note: Does not include digital indicator shown for ... morereference only.
$
55.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Later 10" Logan compound swivel. A couple of small dings but. Very legible index numbers.
$
289.42
Buy It Now
$13.80 Shipping
Condition: New
Location: Warren, United States
This compact grinder has many uses. These are just a few of the uses. The grinder is accurate and simple to mount. I hand build your tools. • Smooth running ... more1/4 hp, 10,000 - 30,000 rpm variable speed motor provides plenty of power for grinding hardened steel parts.
$
25.95
Buy It Now
Free Shipping
Condition: New
Location: South Whitley, United States
Photograph shows Actual item for sale. All belts are 1"wide.
$
65.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
10" Logan Lathe Compound With Large Dial Approx. 10 Backlash Large dial is not original. Please ask if you have questions. Thanks for looking.
$
8.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
50.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
New Cross Slide Feed Nut for Logan 10" & 11" Lathes S/N 17152 and newer.
$
70.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
125.00
Buy It Now
$13.85 Shipping
Condition: Used
Location: North Tonawanda, United States
Nice Original Headstock Spindle Gear For A Logan 11" Lathe. Gear measures 2 3/8" outer diameter. 1 3/4" interior bore with a single keyway ... moreand is 11/16" thick. Gear is also has 46 teeth. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
10.00
Buy It Now
$4.95 Shipping
Condition: New
Location: Delphi, United States
A set of durable 3D printed wiper retainers. Printed in a gray look to approximate the color of the originals.
$
45.95
Buy It Now
Free Shipping
Condition: New
Location: South Whitley, United States
1" wide New High Prformace Multi-Ply Belting. Up to 70" Long.
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
Logan 14 inch lathe quick change gearbox
Logan 14 inch lathe model 6565 6510 6530 6566 it fits. Good shape. Sold as is buyer pays shipping. Says model 6565 on it. everything looks good on it Posted with
CRAFTSMAN SCREW PITCH GAUGE 4-84 for Atlas South Bend Logan lathe XCLNT!
This listing is for a Craftsman screw pitch gauge. It has 4-84 pitches. It is in perfect condition. Still having the original oiling from the manufacturer on it. Comes in box. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
lathe tool Holder TH0884 T4S 1/2" bit straight shank Craftsaman logan Clausing
Lathe Th0884 T4S 1/2" Bi t tool holder straight shank.may have surface rust. Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. If you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do whatever I can to make it right for both of us. Bill’s Tools offers a 14 day money back guarantee All items are paid via PayPal. If you cannot send payment via PayPal, please contact me and we will make other arrangements for payment. Please ... morebe aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. I only add insurance to orders over $100 which is already included in the shipping cost. If your item is under $100 and you want to insure it at your cost please contact me before payment is made. Florida Residents I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. Please give at least 10 business days before expecting delivery. Please do not ask me to mark items with a
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE LANTERN ROCKER TOOL POST
Excellent Condition- Original rocker type tool post for a Logan 9" or 10" lathe. Tool post base is 1 3/8" x 1 3/8" 5/16" thick. Tool post body diameter is 1" Stands 3 1/4" to the shoulder. Interior post dimensions are 7/16" wide x 1 5/8" with the washer and rocker in place. Bolt is removable from body. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE - #7500
aims LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Logan Engineering. This is a used Variable Speed Second Op Turret Lathe in working condition. Model# 7500 Serial# 78400 Features: 8" Three-Jaw Hydraulic Power Chuck. 8-Station Indexing Turret. Infinitely Variable Speeds. Specifications: Swing: Swing Over Bed: 14" Swing Over Turret: 1" Capacities: Distance from Floor to Center: 45-1/2" Distance Between Centers: 25" with power chuck(usually 28" with standard chuck and bore) Spindle: Nose: 2-1/4" 8 tpi Number of Spindle Speeds: Infinitely Variable Range of Spindle Speeds: 50- 2.000 rpm. Threads: Inch Threads: 4- 224 tpi. Turret: Number of Stations: 8 Turret Travel: ... more8" Bed: Width of Bed Face: 10" Length of Bed: 56" General: Motor: 2/ 1 Horsepower. 1,740/ 860 rpm, 3/ 3.2 Amps, 440 Volt, 60 Hz Electrical: 440 Volt. Three Phase Overall Dimensions: 78" x 34" x 59" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP TURRET LATHE- 7500 LOGAN 14" x 25" VARIABLE SPEED SECOND OP
LOGAN 14" x 30" GEARED HEAD VARIABLE SPEED BENCH LATHE - #6510H
aims LOGAN 14" x 30" GEARED HEAD VARIABLE SPEED BENCH LATHE- 6510H read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made in the U.S.A. by Logan Engineering Co. This is a used Geared Head Variable Speed Bench Lathe in GREAT condition. The carriage. Cross slide& compound slide have very minimal backlash. All movements are smooth and easy. Model# 6510H Serial# 85651 This Lathe is coming out of a Downtown Pasadena shop that is closing down. All of their equipment has been well maintained. And this machine is no exception. This company for the last 50 years did Industrial Design and Prototype work, helping other companies create new products. This machine has never been in a production setting, or put on a production schedule. We here at Reliable ... moreTools strive to provide you with quality equipment, at a fraction of the cost. So act fast because a deal like this won't last long. Features: Geared Head. 10" Four-Jaw Chuck. Lever Collet Closer. 5C Nose Piece. Infinitely Variable Speeds. 2 Horsepower Motor. Features: Swing: Swing Over Bed: 14" Swing Over Cross Slide: 9" Swing Over Compound: 3-1/2" Capacities: Distance from Floor to Center: 45-1/4" Distance Between Centers: 30" Headstock: Spindle: 2-1/4" 8 tpi Spindle Bore: 1" thru collet closer Speed Range: 55 to 300 rpm(Back Gear) 350- 2,000 rpm(Direct Drive) Threads: Standard: 4 to 224 tpi. Carriage: Cross Slide Travel: 9-3/4" Compound Slide Travel: 4" Tailstock: Quill Diameter: 1-3/4" Quill Travel: 5-1/4" Quill Taper: 3 Morse Taper. Bed: Width of Bed Face: 10" Length of Bed: 56" General: Motor: 2 Horsepower. 208-220/ 440 Volt, 1,740 rpm, 6.2/ 3.1 Amp, 60 Hz Electrical: 208-220/ 440 Volt. Three Phase(currently wired for 220 Volt) Overall Dimensions: 72" x 26" x 51" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions.
Lathe Level handle Logan action closer w/6 '3AT' Precision collets
Item you are bidding on is a lathe lever handle action collet closer draw bell believed to be for a Logan lathe. There are no markings on it but after much research the Logan Lathe seems to be the match. Included are six 3AT Precision collets for it- all different sizes = 3/16. 1/4, 5/16, 3/8, 7/16, 1/2 Item was my grandfathers who worked in a machine shop his entire life and Im sure would be happy to see these items go to someone who appreciates the craft. Please contact me with any questions and I will answer to the best of my ability.
NICE LOGAN 10" MODEL 820 or 200 LATHE REVERSE TUMBLER BRACKET & GEAR LA-137-2
Nice- Original reverse tumbler gear bracket with one gear for a 10" Logan Model 820 or 200 lathe. Reverse gear bracket is Logan part number LA-137-2. Gear is in fine order. Plunger lever/handle is in good order. Functions as it should. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL LOGAN 10 MODEL 820 LATHE SPLIT HALF NUT ASSY SET PART LA-529 LA-527
Nice- Complete original Logan half nut assembly for a Logan 10" Model 820 lathe. Assembly includes half nuts. Logan part number LA-529 and half nut plate, Logan part numer LA-527-1. Half nut pins and mounting hardware are also included, as shown. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE LOGAN 10" MODEL 820 OR 200 LATHE REVERSE TUMBLER 30 TOOTH IDLER GEAR LA-216
Nice- Original reverse tumbler 30 tooth idler gear with oilless bearing for a 10" Logan Model 820 or 200 lathe. Gear is part number LA-216. Outer diameter is 2" Inner diameter with bearing in place, is 5/8" Gear is 9/16" thick. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e29b3a569-0xf4-
VERY NICE ORIGINAL LOGAN 10 MODEL 820 METAL LATHE TAILSTOCK WRENCH 15/16" HEX
Very Nice- Original Logan tailstock wrench for a Logan 10" Model 820 lathe. Hex is 15/16" All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE LOGAN 10" MODEL 820 OR 200 LATHE REVERSE TUMBLER LOCK PART LA-1007 LA-143
Nice- Original reverse tumbler lock with mounting screws for a 10" Logan Model 820 or 200 lathe. Lock is part number LA-1007. Also known as LA-143-1. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE SET LOGAN 10" MODEL 820 200 LATHE REVERSE TUMBLER PINION STUDS PART LA-144
Nice- Set of original reverse tumbler pinion studs with oilless bearings and nuts for a 10" Logan Model 820 or 200 lathe. Pinion studs are part number LA-144. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 10" MODEL 820 LATHE COMPOUND SLIDE REST TOOL POST TOP
Excellent- Original compound rest top assembly for a 10" Logan Model 820 lathe. Collar dial is very legible. Casting and side adjusting screws are in fine order. Very little. If any, backlash noted. In excellent condition, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 10" MODEL 820 LATHE COMPOUND REST CHIP GUARD LA-684
Very Nice- Original Logan compound slide rest chip guard for a Logan 10" Model 820 lathe. Mounting holes are 2 1/2" apart on center. Logan part number LA-684. In very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e29b3a635-0xfe-
EXCELLENT ORIGINAL LOGAN 10" MODEL 820 LATHE COMPLETE TAILSTOCK ASSEMBLY
Excellent Condition- Complete original tailstock assembly for a 10" Logan Model 820 lathe. MT2 tapered bore is excellent. Ram indicators are clear and legible. Retains original oil dropper. No backlash noted. Complete original tailstock assembly in excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN LATHE HALF NUT CAM SHAFT HANDLE
good condition; logan lever.10" i ship very fast 24 hrs. or less 5-1/2 days a week USPS
10" Logan lathe 210 headstock bottom bracket
Logan 210 lathe bracket that holds head stock to frame; I ship very fast 24 hrs. or less 5-1/2 days a week USPS. PS. with screws not in pic.
Logan lathe Model 200 COUNTERSHAFT DRIVE BOX BRACKET & BUSHING 1 Only
Logan Lathe Model 200 COUNTERSHAFT DRIVE BOX BRACKET& BUSHING 1 Only Casting is in perfect shape but the bushing has a bit of wear in the ID.
Logan 13 in. Lathe 2535 Screw Cutting and Turret Air Pneumatic 10" x 24"
Logan 13 in. Screw Cutting and Turret Lathe Model# 2535-2VLH Variable Speed Drive: 250-1400 RPM Pneumatic 5C Collect Chuck Three-Jaw Chuck Estimated 10" x 24" Capacity Doerr Electric Motor: Volts: 220 Phase: 3 HP: 1 RPM: 1740 Amps: 3.0 Weight: 1.260 Lb Come with everything you see in pictures See pictures for more details. Feel free to ask any questions you may have. Buyer must arrange and pay for freight. Local Pickup is available at zip code 45039 Residents of Ohio pay a 6.5% tax. All items are Sold"AS IS" No Warranty. Items must be picked up/arrangements must be made within 30 days or the items will be considered forfeited to us. I will consider all reasonable offers on any of my store items. Check out my! New items posted daily!
ORIGINAL LOGAN 9 10 LATHE 2 STEP STEEL V DRIVE MOTOR PULLEY 5/8" & 3/4" BORE
Original Logan 2 step steel V belt motor pulley. 3/4" bore with single 3/16" keyway. 3/4" to 5/8" reducing sleeve is installed, as shown. Key is included as shown. The top of the V groove inside measurement is 1/2" the base of the V groove is 3/16" Large side is 4 1/4" diameter, small side is 2 5/16" Set screw is present. Only cosmetic marks on face of one side. Other than that, it is in excellent shape. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE ORIGINAL LOGAN 9" 10" LATHE 48 TOOTH THREADING CHANGE GEAR
Nice- Original Logan 48 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 1/8" outer diameter. Teeth are all in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 12" LATHE HANDWHEEL PINION SHAFT AND GEAR LA-549 & LA-550
Logan 12 inch lathe hand wheel shaft and pinion gear. Good 20 tooth 16 dp gear and hand wheel threads. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e3f591622-0x101-
LOGAN 200 & 10&11" LATHE PLAIN CHANGE APRON HANDWHEEL PINION GEAR LA-158
Logan 200 and 10&11 inch lathe pinion gear. Good 16 tooth 16 dp gear and hand wheel threads.
LOGAN 10" LATHE TAIL STOCK/TAILSTOCK
Very nice Logan 10" lathe tail stock including the illusive white lead dauber. The quill is in very good condition with legible markings. The Acme screw was worn so I replaced it with one that has much better threads and I replaced the oil button on top. I also hand reamed the 2 Morse Taper in the quill so it is clean and without any scoring.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 60 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 60 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 7/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e3f5916a0-0xf2-
LOGAN /MONTGOMERY WARDS 10" LATHE CARRIAGE DRIVE / LEAD SCREW END BEARING
Up for auction is a Logan 10" lathe carriage lead screw end bearing. Please look at the photo for condition I can email more pictures upon request. Thanks for looking. Posted with
Logan Model 200 Lathe 24 Tooth Teeth Shifter Gear LA-129
7/16" Wide. 1.615" Diameter 1/2" Bore. 1/8" Key 16 DP New $60.50 Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
LATER LOGAN 10&11" LATHE QUICK CHANGE GEAR BOX 16 TOOTH IDLER GEAR LA-1223
Logan 10" and 11" lathe quick change gear box 16 tooth idler gear w/bushing for lathes after serial number 46561. 9 od. 382 wide with a.438 bushed bore.
Logan Lathe Wrench (Marked) 3/8" Square Tool Post and 19/32" Open End, Vintage
Check out my other items. I will combine shipping. Logan Lathe Wrench(Marked) 3/8" Square Tool Post and 19/32" Open End. Back is marked 0646. Original silver paint has loss. Needs cleaning and painting to look new. Not pitted. See pictures. Check shipping area for shipping options. Ask any? Sold as-is. Check my feedback. PayPal only for payment. PayPal required for international buyers. Check out my other items!
10" Logan 210 Lathe Lead Screw Bushings
Logan 210 bushings for a lead screw; I ship very fast 24 hrs. or less 5-1/2 days a week USPS. PS. with screws as shown
Original Logan lathe headstock sleeve, NOS vrirgin never out of the seal peel
Buy now before the internet sales TAX! Free ship 48 states only! Virgin parts here fellas. This original Logan lathe part is still in the original box and the sleeve still carries the peel-seel protective coating. The box reads#6023. Logan Engineering, Chicago 30, ILL. Since it is Chicago 30, this pre-dates the ZIP code plan intrioduced in the mid sixties. So. You are looking at an original part, still in the cardboard box that is 40 plus years old. Hoew cool is that? For 3MT center. It doesn't get any better than that. Except for the good price I have it listed at! Thanks for looking. Price is shipped to your door in the Heartland! Thanks; Craig 330.547.6300
NICE ORIGINAL LOGAN 10" MODEL 200 LATHE COMPOUND REST BASE CAST & NUT
Nice- Original compound rest base cast with gib and screws for a 10" Logan lathe. Model 200. Condition of nut is unknown. Cut noted to one side of unit. Gib and gib adjusting screws are in good order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 10 MODEL 820 LATHE COMPOUND TOP SWIVEL LOCK BOLTS SET
Excellent- Set of original Logan 10" Model 820 compound rest top swivel lock bolts and nuts. In excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 10" MODEL 820 LATHE COMPOUND REST BASE CAST & GIB
Excellent Condition- Original compound rest base cast with gib and screws for a 10" Logan lathe. Model 820. Gib and gib adjusting screws are included. In excellent condition, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE LOGAN 10" MODEL 200 LATHE COUNTERSHAFT DRIVE BOX BRACKET & PULLEY ASSY
Very Nice- Original countershaft/drive box bracket with pulleys for a Logan 10" Model 200 lathe. Retains original paint. Bearings are in good order. Includes original mounting bolts shown. Very nice pulley assembly in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 821 METAL LATHE LA 747 SADDLE SWIVEL 10
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ from 10" swing lathe marked LA 747 for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. ... morePlease check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Logan lathe apron carriage 14 inch model 6565 6510 6520 6566
Logan 14 inch lathe apron carriage. Everything appears to turn. model 6565 6510 6520 6566 It is about 64 inches long. Sold as is. Buyer pays shipping Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e5318da41-0xff-
Logan lathe feed screw 14 inch model 6565 6510 6520 6566
Logan 14 inch lathe feedscrew. model 6565 6510 6520 6566 It is about 64 inches long. Sold as is. Buyer pays shipping Posted with
LATHE 1/2" TOOL BITS LOGAN SOUTH BEND ATLAS CLAUSING HARDINGE ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Neatro Packaging In Box Condition Excellent Quantity 12 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Jacobs 59B Chuck w/Chuck Key Southbend, Atlas Logan headstock Lathe Chuck
The chuck moves freely and the mounting 1/12 X 8 threads are in good condition Ships to continual United States only and I'll offer free shipping with Buy It Now pricing Thanks for looking.
1 SET OF 4 ORIGINAL ATLAS 6" 10" 12" LATHE DOGS CRAFTSMAN LOGAN SOUTH BEND ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Atlas Packaging None Condition Excellent Quantity 1 Set of 4 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1/2" 3/4" 1" 1 1/2" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LATHE THREADING TOOL HOLDER ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Williams Packaging In Original Box Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Williams# 2050. 3/4" x 3/8" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Logan Lathe Parts / Attachments
You are bidding on all of the items shown. They are in good condition. I think they are Logan brand. But only one of them has a label. I have included all of the part numbers in the photos. Sold as shown. P lease see pictures and email me with any questions. See my other auctions; I will combine shipping when possible. If you have a question. Please ask it BEFORE the auction ends! Payment required within 2 days. No local pickup. No buy it now. PayPal only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e538ab706-0xff-
J.H. Williams Knurling Tool -Metal Lathe atlas craftsman southbend logan
J. H. Williams KNURLING TOOL HOLDER for 9" THRU 12" lathes. Shank measures 3/8" wide by 7/8" tall. medium-heavy knurls- Part number O-K TOOL MADE IN USA VERY GOOD CONDITION check my other auctions- I always combine shipping when possible
READY TOOL LATHE LIVE CENTER MT # 5 MORSE TAPER LOGAN SOUTH BEND MONARCH ENCO
LOTS OF AUCTIONS ONLINE NOW! Brand Ready Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LATHE FACEPLATE SHELDON LOGAN SOUTH BEND HARDINGE PART # K 1832 11" FACE PLATE
Lathe faceplate not sure what model it's off of. Part# K1832 measures 11" across I seen no visable cracks or welds. There are some small holes partially drilled in the center. On Feb-24-13 at 22:51:37 PST. Seller added the following information:
LOGAN LATHE REVERSE FORWARD GEAR 30T LOGAN WARDS GEAR REVERSER MONTGOMERY WARDS
Came off a Logan Model 200 should fit most others with the 30T reverse forward bottom gear. Not new or mint but good usable shape. Shipped Priority Mail to the lower 48 with delivery confirmation for $5.80 On Feb-03-13 at 17:06:56 PST. Seller added the following information:
LOGAN LATHE HALF NUT ASSEMBLY MONGOMERY WARD WARDS HALF NUT 10 11 LOGAN LATHE
This came off a Logan 200 parts lathe I picked up for my 870 Logan 10 Nice shape not new or mint but good usable shape. Shipped Priority Small Flat Rate Box to the lower 48 for $5.80 On Feb-03-13 at 17:06:55 PST. Seller added the following information:
VERY NICE ORIGINAL LOGAN 9" MODEL 400 LATHE CHANGE GEAR BANJO BRACKET PART LB-27
Very Nice- Original change gear banjo bracket with bolt for a 9" Logan Model 400 lathe. Stamped with part LB-27. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SOUTH BEND 10" HEAVY 10 LATHE 6 7/8" DIA. FACE PLATE 2 1/4" x 8 TPI LOGAN
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e550b4977-0x100-
Atlas Th54 metal lathe Knurling tool. Fits Southbend, Clausing, Logan
Atlas Th54 metal lathe Knurling tool. will combine shipping if possible. Thanks for looking. lenth of neck 3 1/2" hight 7/8" width 3/8" wheels are coarse and in mark free condition. Tool is used but in good working condition.
WESTERN BORING TOOL SOUTH BEND LOGAN HARDINGE ATLAS CLAUSING LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Western Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1 5/16" x 9/16" Shank. 5/8" Max Bar. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
ARMSTRONG LATHE CUT-OFF TOOL HOLDER SOUTH BEND LOGAN HARDINGE ATLAS CLAUSING
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Shank is a bit shaved. 1" x 7/16" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
FURNAS FOR / REV DRUM SWITCH ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Furnas Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Was in working order when removed. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
CUTLER HAMMER FOR / REV DRUM SWITCH ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Cutler Hammer Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Untested. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Logan 10" Lathe Leadscrew Bushing LA166 & Banjo LA227 for Change Gears Wards
These parts are from a 1944 vintage Logan model 200 lathe and will work for a 210 or Wards lathe. The Leadscrew Bushing it in excellent condition but the Banjo has been repaired. The repair appears to have been very well done and did not negatively effect the use of the lathe. If you have any questions please ask before bidding.
LOGAN LATHE, MODEL 955, (2), WORKING, PARTS MACHINES, SOLD AS LOT
MODEL 955 11" SWING BOTH HAVE CHUCKS ONE TOOLPOST ONLY. I AM KEEPING ONE ONE HAS QUICK CHANGE FEED BOX. OTHER IS MISSING SEE PHOTOS NO TAILSTOCKS BOTH ARE WIRED 22O VOLT. 3 PHASE NO CHARGE FOR LOADING EACH LATHE MOUNTED TO SKID. SHRINK WRAPPED.591LBS. FOR ONE, 595 LBS. FOR THE OTHER A GOOD LOT OF PARTS. AND MAYBE(2 CAN MAKE 1 GOOD ONE) BOTH IN WORKING. MEANING WILL RUN, JUST NOT TOTALLY COMPLETE
Logan 9 10 11 & Wards Model 4TLC-700A Metal Lathe 16 Tooth Gear 5/8" ID
Description: Nice used Logan 9 10" 11" Wards Model 4TLC-700A Metal Lathe 16 Tooth Change Gear. Has a 1.121 OD. A 5/8 ID with a 5/32 keyway andis 7/16" wide. Came off a 10" Wards Model No. 04TLC-700A Metal Lathe made by Logan and sold under the Wards name. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. ... moreParcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
USED LATHE LIVE CENTER WITH #2MT MORSE TAPER - MADE IN JAPAN! - ATLAS LOGAN ENCO
This is a used lathe live center with a#2MT shank. It's in good shape but has some light grooving on the nose(looks worse in the pictures I think) Nice smooth movement. This is not a cheap Chinese import and has loads of life left in it. Don't miss this it as it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending ... moreupon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
LOGAN 11" LATHE BANJO 60T/48T COMPOUND STUD GEAR ASSEMBLY - EXCELLENT!!
The following parts came from a LOGAN lathe with a 11" swing and 3' bed. The serial# was 60805(not sure of model number) This lathe was in the middle of restoration and was NOT parted out due to wear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the 60T/ 48T compound gear that bolts to the banjo gear bracket. It's in excellent shape and looks barely used. If'New' = 10. Then this is a solid 8.5 to 9. If you're restoring a Logan you will not find one much nicer! Don't miss it, it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST ... moreSHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return.
VERY NICE ORIGINAL LOGAN 8" FACE DOG PLATE TOOL 4 LATHE 1 1/2" 8 TPI
Very Nice- Original Logan 8" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in very fine order. Outside thickness 13/16" Retains original paint. Nice heavy driver plate, in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13e62de9316-0x102-
12" 3 Jaw lathe chuck South Bend Atlas Logan Clausing
12" 3 Jaw lathe chuck.works smooth.center of chuck has been hit with cutting tool and has scars but does not effect function of chuck. to cut the cost of shipping it will be disassembled and shipped in two boxes to meet FRB weight limit. Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make ... moreother arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, plea
LOGAN (1063) 6" 3-JAW LATHE CHUCK 2-1/4" x 8 tpi SPINDLE MOUNT - BUCK CUSHMAN
This is a used genuine LOGAN'1036' 6" 3-Jaw lathe scroll chuck with reverse jaws(no forward jaws are included I'm afraid) It has a 2.25" x 8 tpi backplate. This chuck is in great shape with no dings or scrapes and it has a nice firm smooth scrolling movement with no slop. Years of service left in this one. I'm selling it cheap because it only has the reverse jaws. Don't miss it as the price includes s uper fast FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT ... moreTHE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pic
Lathe Grinding Fixture Hardinge Atlas Clausing Logan
This listing is for a Lathe Grinding Fixture. 3/4" x 3/8" T-Slot mount 9" total height 8 5/8" length internal reference F Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of ... morethe crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel fre
Lantern or Rocker style tool post for Logan South Bend Craftsman Atlas lathe
Lantern or Rocker style 4" tool post. Accepts Armstrong and Williams style tool holders with 3/8" shank for Logan, Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes. Threads are all good. Shows some wear. But is solid and works good. I don't have the wrench. Auction is for exactly what is shown in the photos.
Williams cutting tool holder Logan South Bend Craftsman Atlas lathe
J.H. Williams No 0-L LH cutting tool holder with 3/8" shank for Logan. Craftsman, Atlas, South Bend, Hardinge, Clausing, and other lathes. Excellent condition, w orks great. Threads are all good. Takes 1/4" cutting tools. INCLUDES HSS cutting tool shown in photo.