In 
 
Order by: 
Available to: 
Price: 
 - 
$
211.31
Buy It Now
Free Shipping
Condition: New
Location: Fullerton,CA,USA
$
118.33
Buy It Now
$15 Shipping
Condition: New
Location: Fullerton,CA,USA
$
1,200
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Aiken,SC,USA
$
439.95
Buy It Now
$0 Shipping
Condition: New
Location: Bend,OR,USA
20 TON Finger Brake Press"Fully Welded" Designed to fit the Harbor Freight 20 ton hydraulic press Item# 32879& 60603. Press brake kit includes ... morean adjustable back stop and side stop for accurate and repeatable bends. The top clamping bar is machined out of 4140 material and includes 5 segmented removable sections. 1" 2" 3" 4" and 9.5" long pieces. These segmented blocks can be removed and rearranged to allow bending of restricted areas on a piece of sheet metal or on a n already partially formed pieces. Max Bending Radius(deg. 110 Max. Bending Capacity 3/8" plate Max Bending Width 19.25" Total width of the brake is 22.125" wide Tools required for assembly. Welder, grinder, level, small square. It Is capable of bending mild steel in the following length and thickness. 19" = Full bending width of the bottom die on anything 1/8" or thinner. 15" in 3/16" 12" in 1/4" 5" in 3/8" The DIY 20 ton press makes a great addition to the arbor press plates we sell HERE THIS KIT COMES FULLY WELDED SHIPPED TO YOUR DOOR Click for more details at our website. website linking
$
15,000
Buy It Now
Free Shipping
Condition: Used
Location: Huntsville,AL,USA
$
75
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Winnetka,CA,USA
$
59,509
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Euclid,OH,USA
$
46
Buy It Now
$20 Shipping
Condition: New
Location: Fullerton,CA,USA
$
12,500
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Please note: This machine was never in ... moreproduction; it was only used for sharpening tooling at an aerospace facility. Just before it was taken out of use. The entire main axis and part of the secondary axis were completely rebuilt by Huffman. Record# 849(1) Used HUFFMAN Model HS-87 R CNC Tool and Cutter Grinder; S/N HB032084; Manufactured 1984 Specifications: Capacity(with Standard Tooling) End Mill Shank Diameter(Max.2-1/2" End Mill Shank Diameter(Min.1/4" Grinding Radius(Max.5" Flute Length(Max.16" Flute Length with Ball Nose(Max.6" Overall Length of Tool(Max.20" Moving the Cutter: A' Rotary Axis(Work Spindle)360 Degrees'C' Rotary Axis(Rotary Table)180 Degrees'X' Slide(Main Base Slide)24" U' Slide(Saddle)12" V' Slide(Table)7" Wheelhead: Y' Vertical Movement.18" Z' Horizontal Movement.18" Wheel Spindle Speed.6000 RPM Variable Speed.1200-6000 RPM Standard GrindingWheel.6" Grinding Wheel Size Range.6- 12" Spindle Motor.10 HP Equipped With: Allen-Bradley 7320 7 Axis CNC Controls Donaldson Model 4655M01 Liquid Coolant Recovery System Large Quantity of Tooling(see below) Installation. Operation and Repair Manuals(Complete set) Over $5K from Huffman for Executive Tapes/Software(5) Wheel Arbor Flanges(2) Borazon Grinding Wheels(1) Lot End Mi
$
70.81
Buy It Now
Free Shipping
Condition: New
Location: United Kingdom
$
1,559
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Euclid,OH,USA
$
39,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milwaukee,WI,USA
$
49,500
Buy It Now
$0 Shipping
Condition: Used
Location: Dallas,TX,USA
$
29,500
Buy It Now
Free Shipping
Condition: Used
Location: Monclova,OH,USA
$
3,499.99
Buy It Now
Free Shipping
Condition: Used
Location: Middlebury,IN,USA
$
95
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Winnetka,CA,USA
$
8,950
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
7,319
Buy It Now
$189 Shipping
Condition: New
Location: Wayland,MI,USA
$
959
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Euclid,OH,USA
$
15,000
Buy It Now
Free Shipping
Condition: Used
Location: Los Angeles,CA,USA
$
7,950
Buy It Now
Free Shipping
Condition: Used
Location: Orange,CA,USA
$
9,500
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record# 1756(1) Used 100 Ton LOEWY Extrusion ... moreStretcher with Detwist Headstock Specifications: Capacity.120 Tons@ 6.000 P.S.I. Workpiece Length.110' Maximum) Rail Gage.45" Wheel Base.42" C-C. Dia. of Detwister Head.39" Jaw Opening.11" Max) 3" Min) Jaw Width.12" Jaw Mounting.6" Dovetail. Electrical Characteristics.240/480 VAC/ 3 Phase/ 60 Cycle Equipped With: 25 HP Oilgear Hydraulic System with Controls. Detwister Drive: 3 HP Reliance Gear Reduction with Controls Overall Dimensions.125' Long x 5' Wide x 6' High. Weight.48.000 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, str
$
799.95
Buy It Now
$140 Shipping
Condition: New
Location: League City,TX,USA
$
226.72
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
31,500
Buy It Now
$0 Shipping
Condition: New
Location: Lithia,FL,USA
$
24,499
Buy It Now
Free Shipping
Condition: Used
Location: Pawtucket,RI,USA
$
5,995
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Warwick,RI,USA
$
11,779
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
34,500
Buy It Now
$0 Shipping
Condition: Used
Location: Mansfield,OH,USA
$
4,950
Buy It Now
Free Shipping
Condition: Used
Location: Brook Park,OH,USA
$
28,000
Buy It Now
$0 Shipping
Condition: Used
Location: Wichita,KS,USA
$
119
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Winnetka,CA,USA
$
9,950
Buy It Now
$0 Shipping
Condition: Used
Location: Cadillac,MI,USA
$
959
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Euclid,OH,USA
$
1,250
Buy It Now
$0 Shipping
Condition: Used
Location: Stow,MA,USA
$
29,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milwaukee,WI,USA
$
2,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Clare,MI,USA
$
79,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milwaukee,WI,USA
$
165
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Winnetka,CA,USA
$
111.09
Buy It Now
$15 Shipping
Condition: New
Location: Fullerton,CA,USA
$
159.99
Buy It Now
$8 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
599.99
Buy It Now
$0 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
49,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milwaukee,WI,USA
$
34,500
Buy It Now
Free Shipping
Condition: New
Location: Three Rivers,MI,USA
NEW WF WELLS 16" x 20" FULL HYDRAULIC TWIN-POST HORIZONTAL BANDSAW- W.F. WELLS 16" x 20" FULL HYDRAULIC TWIN-POST BAND SAW INVENTORY# ... more5829 MODEL: F-16-2 MADE IN THE USA VIEW THE W.F. WELLS MODEL F-16-2 SPECIFICATIONS PDF HERE SPECIFICATIONS: CAPACITY@ 90°: RECTANGULAR: 16" H x 20" W ROUND: 16" DIAMETER CAPACITY@ 45°: RECTANGULAR: 16" H x 10" W ROUND: 10" DIAMETER WORK LOAD CAPACITY: 5.000 LBS BLADE SPEED RANGE: 60- 425 SFPM BLADE SIZE: 1 1/4" x.042" x 15' BAND WHEEL SIZE: 20" DIAMETER BLADE GUIDE: ROLLERS AND CARBIDE SIDE BLOCKS BLADE TENSION: HYDRAULIC VISE: HYDRAULIC. FULL STROKE SAWING FORCE: 0- 750 LBS MOTORS: BLADE DRIVE: 7.5 HP. AC VECTOR DRIVE HYDRAULIC DRIVE: 2 HP WORK HEIGHT: 26" COOLANT CAPACITY: 15 GALLONS HYDRAULIC CAPACITY: 20 GALLON ELECTRICS: WIRED TO NFPA 79 MACHINE TOOL STANDARDS MECHANICAL SPECIFICATIONS: SHIPPING WEIGHT: 2.450 LBS DIMENSIONS: 49" L x 97" W x 83" H STANDARD EQUIPMENT: 1 1/4" BI-METAL BLADE CARBIDE GUIDES WITH ROLLER BACKUPS HYDRAULIC VISE WITH VARIABLE PRESSURE HYDRAULIC BLADE PRESSURE CONTROL HYDRAULIC BLADE TENSION CONTROL SEMI-AUTOMATIC OPERATION ALL MOTORS AND CONTROLS TEFC MOTORS FUSED DISCONNECT BUILT-IN COOLANT SYSTEM 45° SWIVELING VISE BLADE POWERED ROTARY CLEANING BRUSH FEED PRESSURE MONITOR/REGULATOR ALL SAFETY GUARDS OPERATOR MANUAL AND PARTS LIST NOTE: STOCK PHOTOS MAY SHOW MACHINE WITH OPTIONAL EQUIPMENT SHIPS NEW FROM MICHIGAN FACTORY- CONTACT US FOR AVAILABILITY AND OPTIONS SPECIFY VOLTAGE WHEN ORDERING: 208-60-3. 230-60-3, 460-60-3 or 575-60-3(5 HP) TAKE A LOOK AT OUR OTHER SAWS HERE! CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine T
$
13,789
Buy It Now
Free Shipping
Condition: New
Location: Albert Lea,MN,USA
BRAND NEW EDWARDS 40 TON SHOP PRESS WITH PORTA POWER UNIT This is one Great Deal from Honestly Good Prices! ORIGINAL PACKAGING/CRATING CALL OR MESSAGE ... moreFOR SHIPPING TIME ========================== Full Size at Half the Price. Heavy-Duty 1/2" Steel Construction. Cylinder with 4" Ram and 12-1/4" Stroke. Rolling Cylinder for Maximum Versatility. Working Area of 38" x 40-1/2" Easy-to-Use Hand/Jog Controls. Quick-Disconnect Hoses. Hydraulic-Assist Table Height Adjustment. Details: Standard Motor 5 HP 3~ 208 V or 230 V. 1725 RPM 14 A. Hydraulic Pump 3-1/2 GPM- 1 Stage. Valve Pressure 2750 PSI. Reservoir 7 Gallons. GENERAL SPECIFICATIONS Rating 40 Tons. Cylinder 4" Ram. Stroke 12-1/4" DIMENSIONS Height 79" Width 48" Depth 48" Shipping Weight 1400 lb. FOR SHIPPING TO HAWAII. ALASKA OR ANY ISLAND OR OUTSIDE USA- CALL FOR SPECIAL ARRANGEMENTS SALES TAX IS BUYER'S RESPONSIBILITY PLEASE CHECK OUT MY OTHER AUCTION AND VISIT MY STORE- WHEN YOU BEGIN BIDDING. DURING AND AFTER THE AUCTION ENDS I WILL BE LISTING OTHER EQUIPMENT BID WITH CONFIDENCE PLEASE CHECK MY FEEDBACK& ME" PAGE SAVE MY USER ID IN YOUR FAVORITES My goal is to turn all new buyers into repeat customers! FOR ADDITIONAL INFORMATION Contact: Todd Nevins@ Nevins Machinery Concepts(508) 583-1333 SPECIFICATIONS: PUNCH Max. Capacity 1" dia. in 5/16" plate, Work Height 38-1/2" OPEN STATION SPECIFICATIONS Throat Depth 5" Open Height 8" Shut Height 7" Stroke 1" Work Height 35-3/4" OPEN STATION TOOLING OPTIONS Angle Notcher Pipe Notcher Coper/Notcher Multi Shear(shown) Rod Shear Punching Assembly Oversized Punching Assembly 241 Punch Assembly Brake ACCESSORIES Pedestal Die Table Magna Light Urethane Stripper GENERAL SPECS Rated Capacity 25 ton, Throat 5-1/2" Open Height 6" Shut Height 5" Stroke 1" Electric Motor Standard 1 HP. 1 Phase, 208/220 v, 1725 rpm. 7 amp, Electric Motor Option 1 HP. 1 Phase, 110 v, 1725 rpm. 14 amp, Hydraulic Pump Size 11 gpm- 2
$
152,500
Buy It Now
$0 Shipping
Condition: Used
Location: Bailey,MI,USA
$
479
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Euclid,OH,USA
$
3,950
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record# 2349(1) Used 3/8” x 15” LENNOX ... moreModel 112 Rotary Shear; S/N 2735 Specifications: Capacity.3/8" Circle Diameter.30" Throat Depth.15" Throat Depth of Circle Arm.1 1/3" nominal Diameter of Cutters.10" Speed.4 speed Motor.3 HP. Electrical Characteristics.220/440 VAC/ 3 Phase/ 60 Cycle. Equipped With: Extra Set of Cutters. Complete Electric Controls Overall Dimensions.38" L-R x 96" F-B x 67" High. Weight.4.500 lbs. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers,
$
2,999
Buy It Now
$0 Shipping
Condition: Used
Location: Columbus,OH,USA
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2359691 A: 0013000000CXCfg O: 0065000000QIj5E PA: View Photo Gallery. ... moreCalculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a THOR Tool& Die Rotary Turret Punch Press 2018 on Stand w/Tooling. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: THOR Tool& Die Co. Model: 2018 Type: Rotary Turret Punch Press Serial No: 2018-F-192 Features/Specifications: Capacity: 12 gauge(mild steel) Punch Range: 1/8" 2" No. of Stations: 18" Diameter of Turret: 18" Throat: 20" Includes: Full set of punches& dies(installed) Stand Railing Extra parts(in small box. As shown) Dimensions& Weight: Overall: L 45" x W 32" x H 65" Shipping Weight: 1.010 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, mil
$
339.99
Buy It Now
$0 Shipping
Condition: New
Location: Toledo,OH,USA
$
211.31
Buy It Now
Free Shipping
Condition: New
Location: Fullerton,CA,USA
$
118.33
Buy It Now
$15 Shipping
Condition: New
Location: Fullerton,CA,USA
$
20,950
Buy It Now
Free Shipping
Condition: New
Location: Harrison,NJ,USA
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking NEW 100 TON H-FRAME HYDRAULIC PRESS w/ALL THE OPTIONS Ref# 134265 iammdna XPRSHF 100 TON PRESSMASTER H-FRAME HYD. PRESS MODEL 100T-E/H- STANDARD NEW- IN STOCK FOR IMMEDIATE DELIVERY RATED CAPACITY. TONNAGE. 100 STROKE. 12" BORE. 8" RAM SPEED PRESS. 20 IPM RETURN. 26 IPM DISTANCE BETWEEN POSTS(RIGHT TO LEFT) 42" DISTANCE BETWEEN POSTS(FRONT TO BACK) 13" MAXIMUM DISTANCE FROM BED TO RAM. 33" WEIGHT. 2.400 LBS. SHIPPING DIMENSIONS. 62" X 48" X 88" STANDARD FEATURES: CYLINDER ACTIVATION IS FINGER TIP CONTROLLED. THE MORE THE HAND LEVER IS ENGAGED THE MORE THE RAM MOVEMENT INCREASES. ALLOWING THE OPERATOR TO USE THE PROPER SPEED FOR THE TASK. PRESSURE REGULATOR- LIMITS RAM PRESSURE-DOUBLE ACTING CYLINDER- PERMITS PULLING AND PRESSING-HYDRAULIC POWER LIFT TABLE-SELF LOCKING TABLE- ELIMINATES LATERAL MOVEMENT-ELECTRIC/HYDRAULIC OPERATION-HEAVY DUTY STEEL STRUCTURE-OPEN SIDES TO FACILITATE WORK ON LONG PIECES-FLAT RAM NOSE TO ALLOW USER TO ADAPT THE PRESS TO A SPECIFIC JOB. LOW SPEED PUMP-LOW SPEED BALDOR 10 HP MOTOR. STANDARD VOLTAGES AVAILABLE-HIGH CAPACITY 15 GALLON HYDRAULIC OIL RESERVOIR-LOW PRESSURE HYDRUALIC
$
206.25
Buy It Now
$48 Shipping
Condition: Used
Location: Tampa,FL,USA
$
198.52
Buy It Now
Free Shipping
Condition: Used
Location: United Kingdom
$
19,000
Buy It Now
Free Shipping
Condition: Used
Location: Imlay City,MI,USA
$
10,399
Buy It Now
$150 Shipping
Condition: New
Location: Albert Lea,MN,USA
$
1,100
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Cold Spring,MN,USA
$
4,950
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2160-65. 1) Used 6.000 lb. x 36" ... moreBradbury Model SR 6.5 Coil Reel; S/N 14971 Specifications: Coil Weight.6.000 lbs. max) Coil Width.36" max) Coil Inside Dia Range.15" to 21" Coil Outside Dia.72" max) Floor To Coil Center Line.44" Mandrel Expansion.Manual Coil Tension.None. Equipped With: Air Brake. Overall Dimensions.4' L-R x 7' F-B x 5' High(est) Weight.2.500 lbs. est. FOB.Casa Grande. AZ. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical, horizontal, wheel) ovens, fu
$
12,500
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2661(1) Used 50 TON DAHLSTROM Model ... more50TP High Speed Cut Off Press; 4 Post Type; Air Clutch/Brake; S/N P769 Specifications: Capacity.50 tons(bottom stroke) Distance Between Posts.19" L-R x_ F-B Distance Between Guide Bushings. Stroke.2" Distance Bed to Floor.44 1/2" Speed.300 spm(est) Motor.10 HP Electrical Characteristics.230/460 VAC/ 3 Phase/ 60 Cycle Equipped With: Complete Electrical Controls Fawick Air Clutch/ Brake Overall Dimensions.75' L-R x 47' F-B x 61' High(est. Weight.4.000 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers)
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 In 

Past Items  
 
Inventory# 30362. SCHULER 4C-20T 4-POST HYDRAULIC PRESS Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 20 Ton Stroke: 30" Daylight: 64" Bed and Ram Area: 40" L-R x 40" F-B Die Space(Nominal) 28" L-R x 40" F-B Distance Between Posts: 28" L-R x 28" F-B Bore Diameter: 5" Rod Diameter: 3.5" EQUIPPED WITH: 75 HP Main Motor 460V/3ph/60Hz Electricals 150 Gal. Oil Reservoir Approximate Overall Dimensions: 90" L-R x 66" F-B x 153" HApproximate Weight: 10000 Lbs Serial Number: 51720 Year N/A* Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior ... moreto shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000
Inventory# 30477. HANNIFIN 150 TON HORIZONTAL HYDRAULIC BULLDOZER PRESS Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 150 Ton Stroke(Approx. 20" Hydraulic Oil Tank: 8 Gal. Motor: 20 HP Electricals: 230/460V. 3Ph, 60Hz Amps: 48@ 230. 24@ 460 Approximate Overall Dimensions: 144" L-R x 80" F-B x 99" HApproximate Weight: 18000 Lbs Serial Number: T11589 Year N/A* Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign ... moreduties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000 liability insurance must perform all removal of machinery or equipment. No Purchaser will be allowed to load their own machinery or equipment unless proof of insurance is
45 Ton x 96" Allsteel Clausing Model 45-8 Hydraulic Press Brake Specifications: Capacity.45 Ton. Length of Bed.96" Distance Between Housings.78" Stroke.0" 6" Variable) Open Height.15" Shut Height.9" Approach Speed.12 IPM. Return Speed.120 IPM. Pressing Speed.15- 60 IPM(Variable) Main Motor.15 HP. Dimensions.96" x 46" x 94" 8,500 LBS. Equipped With: 34" Manual Back Gauge. Stroke Adjustment. Flow Valve(Speed Control) Electric Foot Switch. Jog/Run/Single Stroke Modes. Die Rail. Any Questions Please Feel Free To Call Us 323-589-6721 or 888-589-6721.
GENERAL SPECIFICATIONS Capacity 350 Tons Overall Length of Bed& Ram 145” Distance Between Housings 124” Open Height 22” Stroke 11” Shut Height(SDAU) 11” Throat 10” Working Height 39” Bed Width 11.89” Oil Capacity 80 US Gallons Back Gauge Range X 40” R 12” Speeds Rapid Approach 180 IPM Press 12 IPM Return 210 IPM Main Motor Horsepower 18 EQUIPPED WITH Cybelec DNC80 Multi Axis CNC Control with Auxiliary Monitor Y1 Y2 Dual Ram Encoders 4-Axis(X1. R, Z1, Z2) Back Gauge Y1- Y2 Dual Ram Encoders Automatic In Bed Crowning Pedestal Palm Button Station/ Electric Foot Switch Variable Tonnage 1-Shot Lube System Electrics 460/3/60 Amps Approximate Overall Dimensions 14’ L X 7’ W 10’T Approximate Overall Weight 35930 Lbs Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
Wysong Model HF255-13 225 Ton 13’ Hydraulic Press Brake Serial# HFB10-105 Asset# 9293 Specifications: Maximum Tonnage 225 Tons No. of Hydraulic Cylinders 4 Approach Speed in/min 120 Bending Speed in/min 24 Return Speed in/min 106” Bending Length 13’ Distance Between Side Frames 10’ 2” Bed Height Above Floor 35” Stroke Length 7” Stroke Adjustment/Depth Stop 4 1/2” Open height 17” Closed Height 10” Throat Depth 12” Bed Width 5 7/8” Motor 25 HP. 3 Ph, 60 Cy Dimensions 5’9” x 13’ Height 107” Weight 34.000 lbs. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from Ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment ... moremethods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or entire plants Please feel free to call or email us
FOB Hamilton. MI Click to view larger photo Specification Description Capacity: 400 Ton, Bed Length: 96" Over All Size: 10' L x 6' D x 12' H, Over All Weight Approx: 39.000 Lbs, Holland Equipment Hunters. Inc. 3345 60th St Hamilton. MI 49419 269-751-5169 269-751-7433
VINTAGE NORWALK 225 FOOD FACTORY HYDRAULIC JUICE PRESS ALL FUNCTIONS OF THE JUICE PRESS ARE WORKING. MOTOR RUNS SMOOTH WITH NO UNUSUAL NOISE. HYDRAULIC PRESS IS FUNCTIONING SMOOTH FROM TOP TO BOTTOM. THE ELECTRICAL CORD IS IN EXCELLENT CONDITION. MISSING ONE RUBBER FOOT ON THE BOTTOM ONE DENT ON TOP OF MOTOR. THERE IS SOME PAINT LOSS FROM THE JUICER BEING TIPPED AT ONE TIME AND HYDRAULIC FLUID REMOVED PART OF THE PAINT. I HAVE TESTED THE JUICER OVER A DOZEN TIMES WITH ALL GOOD RESULTS. THE JUICER HAS BEEN SITTING FOR WEEKS WITH FLUID AND SHOWS NO SIGNS OF LEAKS. THE JUICER IS ONE OF THE FIRST MODELS AND IS THE MOST POWERFUL PRESS FOR ITS TIME. NORWALK 225 MADE AROUND THE 50's 60's IN ST. GEORGE. UTAH, U.S.A. EVEN THOUGH THIS ITEM IS WORKING EXCELLENT AT THIS TIME AS INTENDED. THIS JUICER IS VERY OLD AND AS WITH ALL VINTAGE ITEMS IT ... moreCOULD NEED MINOR REPAIRS AT SOME POINT IN THE NEAR FUTURE. THEREFORE. AT THIS TIME I WILL BE SELLING THIS JUICER FOR PARTS OR REPAIR ONLY TO AVOID BUYERS THAT TRY TO ABUSE EBAY POLICY. IF YOU ARE NOT FAMILIAR WITH VINTAGE NORWALK JUICERS. DO A BIT OF RESEARCH BEFORE BIDDING. THE NORWALK 225 JUICER WOULD BE BEST SUITED AND ENJOYED WITH FOLKS FAMILIAR WITH THE SUPERIORITY AND LOOK OF A VINTAGE NORWALK JUICERS. THE JUICER WILL HAVE TO BE EMPTIED OF FLUID FOR DELIVERY TO AVOID TIPPING AND SPILL. VIDEO OF JUICER OPERATING CAN BE MAILED UPON REQUEST. ITEM IN PHOTO IS GUARANTEED TO BE DELIVERED AS DESCRIBED. TRUSTED SELLER WITH POSITIVE FEEDBACK. ALL QUESTIONS WELCOME AND ANSWERED. SHIPPING IS TO THE LOWER 48 CONTINENTAL STATES ONLY. PAYPAL ONLY. NO e-CHECKS PLEASE.
This sale is for a laboratory surplus Enerpac Hydraulic BRP-series pull Cylinder. It is an Enerpac Model BRP306 with a 30 ton/ 10.000 psi max capacity. Retail Price for this Model is Over $5.000! Buyer to pay for calculated shipping via UPS Ground. Feel free to call me if you have any questions- Mark 916-761-6310. Some info from Enerpac's website: Enerpac pull cylinders feature high strength alloy steel construction, Plunger blow-out protection to prevent rod over-extension, Hard chrome-plated plunger for long life, Replaceable links on BRP pull cylinder models, Baked enamel finish for increased corrosion resistance, CR-400 coupler and dust cap included on all pull cylinder models, Plunger wiper reduces contamination. Extending cylinder life, Single-acting. Spring return. Cylinder Capacity Stroke Model Number Cylinder Effective Area Oil ... moreCapacity Collapsed Height Extended Height Outside Diameter Weight ton(kN) mm, cm 2 cm 3 mm, mm, mm, kg, 2.5(24) 127, BRC-25 3.5, 45, 264, 391, 48, 1.8, 5(51) 140, BRC-46 7.3, 101, 301, 441, 57, 4.5, 10(105) 151, BRC-106 15, 228, 289, 440, 85, 9.5, 151, BRP-106C* 15, 227, 587, 738, 85, 15.9, 151, BRP-106L* 15, 227, 541, 692, 85, 13.2, 30(326) 155, BRP-306* 46.6, 722, 1085, 1240, 136, 48.1, 50(505) 152, BRP-606* 72.1, 1096, 719, 871, 140, 53.5, Note: BRP-106C. BRP-106L and BRP-606 are fitted with rubber bellows for rod protection. Also available as cylinder-pump sets.
5000 TON TIANJIN/PACIFIC MACHINE HYDRAULIC EMBOSSING PRESS New 2003/ Model# TPY50 Bed Size: 84-1/2" x 35-1/2" Distance Between the Frames: 86" Ram Face: 84-1/2" x 51-1/4" Ram Stroke: Approx. 10" Maximum Daylight: Approx. 16" Pressing Speed: 4 to.8 MM Per Second Advance& Return Speed: 50 to 100 MM Per Second Bolster Plate Bolted to Bed: 84-1/2" x 51-1/4" x 7-7/8" Thick T-Slotted Plate Bolted to Bolster Plate: 84-1/2" x 51-1/4" x 2-3/8" Thick Hydraulic Pump Motor: 75 HP. 3 Phase, 60 Cycle, 575 Volts Operator Control Console DIMENSIONS: Main Press with Bolster(Laying Down) 214" L x 129" W x 72" H x 79.000 Lbs. Ram: 84-1/2" L x 51-1/4" W x 32" H x 26.000 Lbs. Ram Hydraulic Cylinder: 55" Dia. x 45" H x 21.500 Lbs. Hydraulic Tank: 95" ... moreL x 62" W x 67" H x 5.000 Lbs. Estimated Weight) Skid with Hydraulic Pump Motor. Electrical Control Cabinet, Operator Control Console, Ladders& Misc: 237" x 88" x 51" 5,000 Lbs. Estimated Weight) HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
2.000 Ton Macrodyne Hydraulic SMC Press Year 1998 ONLY PRESSED PLASTIC Very Good Conditions Ready to Ship GENERAL Frame style Unitized frame Pressing direction Down stroking Slide/Platen guiding 8-point Deflection 0.002 in/ft CAPACITY Press capacity(tons) 2.000 Net lifting capacity(tons) 40 At fast return speed Maximum stripping capacity(tons) 400 Net Maximum Eccentric Loading Left to right Offset from centreline(inches) Maximum allowable tonnage@ offset(tons) PHYSICAL DIMENSIONS& CHARACTERISTICS Overall width of press(inches) 219.5 Right to left Overall depth of press(inches) 137 Front to back Overall height of press(inches) 424.25 Height from face of bolster to the floor(inches) 2.125 Height from the floor to the top of the press(inches) 340.875 Press opening(inches) 90" Left to right Slide size(inches) Left to right 120" ... moreFront to back 96" Bolster Size(inches) Left to right 120 Front to back 96 SPEEDS Fast advance(inches/min) 1.200 Pressing speed at full tonnage(inches/min) 3-35 Number of Velocity/Position Profiling steps Number of Pressure/Time Profiling steps Pressing speed of 60% of full tonnage(inches/min) 3-35 Rapid retract(inches/min) 900 TIMES Dwell(secs. 0-120 HYDRAULICS Location of hydraulic unit top Main cylinder Quantity 1 Diameter(inches) 35 Single/double acting double Pull Back cylinder Quantity 2 Diameter(inches) 7 Single/double acting double Max. system operating pressure(PSIG) 4000 Main pumps Quantity 1 Capacity/pump(GPM) 115 Auxiliary pumps Quantity 1 Capacity/pump(GPM) 45 Pilot/Assist Pump Quantity 1 Capacity/pump(GPM) 32 Hydraulic System Manufacturer Rexroth COOLING WATER Maximum flow(US. GPM) Maximum permissable temperature(ºF) COMPRESSED AIR Maximum capacity(CFM) Minimum pressure(PSIG) ELECTRICAL Electrical supply Voltage 600 Frequency 60 Main pump motor#1: Horse power 250 Speed 1.800 Enclosure ODP NEMA Design Nema"B" Insulation Class Class F Ambient 40 degC Temperature rise 155 degC Mounting C-flange Service Factor 1.15 PLC Manufacturer Allen-Bradley Model
ebay template Search our ENTIRE store but ask that you look at the scans below to see actual image and information] for photo dimensions. See ADDITIONAL DETAILS below images) Historic Images Part Number: nec76223. PHOTO FRONT PHOTO BACK[click an image above to see a larger version] ADDITIONAL DETAILS: This is an original press photo. pressures up to 150 million poundsPhoto measures 10.25 x 8inches. Photo is dated 07-05-1939. Three simple reasons: 1) We are passionate about photographs. 2) we have assembled the largest collection of original press photos available on eBay, and 3) we are fiercely committed to total customer satisfaction. Every team member here at Historic Images Inc is committed to taking care of our customers. Our leadership team is constantly seeking out unique archives and photo collections to ensure you have access to unique ... moreitems across a wide area of subjects and from different parts of the country. Once we take possession of the photos, we take great care of them throughout their lifecycle of prepping, scanning, captioning, and storing. When you purchase from us, we"sandwich" your photo between two pieces of cross-corrugated cardboard, enclose it in plastic, and send it your way. We only sell original press photos on eBay, so bid now before its gone! We appreciate you taking the time to learn about us. And we hope to earn your business and complete customer satisfaction. Our company was formed in September 2009. With a handful of scanners and people literally working out of a basement. In those early days, we scanned boxes of photos, 1000 at a time, for our first customers. Today, we occupy almost 10,000 SF of space in Memphis TN, and have 30 team members that give us the ability to fully archive tens of thousands of photos per day. Our company has worked with magazines and newspapers from Detroit, Boston, Denver, Seattle, Tampa, Chicago, Charlotte, and Toronto, just to name a few. We are constantly adding to our inventory. And have assembled an archive of literally millions of pho
10' x 16 GA DREIS& KRUMP HYDRAULIC"SPEEDIBENDER" 27055 PRESS BRAKE New 1966. Serial No 119766, Model SBA-104 Speedibender EQUIPPED WITH: Hydraulic Automatic Die Positioning Variable Stroke Length Top Die and Four Position Bottom Die Inch/Run Control- Foot Switch CATALOGUE SPECIFICATIONS: Bending Length. 122" Bending Capacity. 10' x 16 GA Hemming& Flattening Capacity. 10' x 20 GA Bending Capacity. 6 x 10 GA Stroke Length. Variable. 1/2" to 4" Die Space. 9-1/2" SPM. Variable. 20 SPM@ 2" Motor. Horsepower. 7-1/2 HP Electrical. 220/440/3/60 Overall Dimensions.L x D. 157" x 70" Overall Height. 69" Weight. 6.800 Lbs. PRICE: F.O.B. OUR WAREHOUSE. $8.950.00 ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
12' CINCINNATI-INC 90-TON CNC HYDRAULIC PRESS BRAKE- 27130. New 1986. Serial No 45128, Model 90CBX10FT#27130 EQUIPPED WITH: Hurco Autobend 5C CNC Back Gauge Dual Palm Buttons 12' Filler Block& Die Holder Set Up Controls- Control Center Foot Pedal CATALOGUE SPECIFICATIONS: Tonnage Capacity. Medium Or Low Speed. 90 TON Tonnage Capacity. High Speed. 40 TON Overall Length of Bed and Ram. 12' Distance Between Housings. 10'6" Bending Capacity. 12' x 12 GA Bending Capacity. 9' x 10 GA Bending Capacity. 6'10' x 3/16" Bending Capacity. 5' x 1/4" Stroke Length. 8" Open Height. 15" Closed Height. 7" Throat Depth. 7" Ram Speed. High. 150 IPM Ram Speed. Medium. 71 IPM Ram Speed. Low. 21 IPM Ram Speed. Return. 136 IPM Hydraulic Motor. Horsepower. 15 HP Overall Height. 9'9" ... moreWeight. Approximately. 17000 LBS PRICE: F.O.B. OUR WAREHOUSE. $24.500.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
THIS IS A CEMBRE RAIL PRESS TOOL USED ON RAILWAY SYSTEMS MODEL( HTEPY) FOR PRESSING BUSHINGS INTO TRAIN RAILS FOR FOLLOWING REASONS RAIL WEB CABLE CONNECTIONS. TRACTION RETURN BONDING, CONTINUITY BONDING, SIGNAL TRACK CIRCUIT CONNECTION, GROUND BONDING IT IS USED BUT HYDRAULICS WORK IF YOU DO RAIL WORK INCLUDING NYCTA RAIL WORK THEN THIS TOOL IS A MUST FOR YOU AND AS ALWAYS FREE SHIPPING
10 TON HAEGER HYDRAULIC AUTOMATIC INSERTION PRESS New June 1995. Serial No 043, Model HP10-A EQUIPPED WITH: Mounted on Heavy Duty Moveable Base Haeger Feeder- Syntron Feeder- Foot Pedal CATALOGUE SPECIFICATIONS: Maximum Force. 20.000 LBS Throat Depth. 24" Stroke Length. Adjustable. 0 to 8-1/2" Vertical Up Stroke. 3/8" to 8-1/2" Oil Tank Reservoir. 18 Gallons Horsepower. 3 HP Floor Space Required. L x D. 3'2" x 4'7" Overall Height. 7'5" Weight. Approximately. 2,000 LBS PRICE: F.O.B. OUR WAREHOUSE. $12.500.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-146d6d1b549-0x111-
Item#3131 Toyokoki Hydraulic CNC Press Brake Equipped With: Toyokoki 1254 Hybrid Servo 8-Axis CNC Control. 5) Axis Back Gauge. Auto Crowning. Teach Function. Machine Specifications: New 2001. Model HYB-12530. Capacity. 138 Ton. Overall Bending Length. 10 ft. Between Housing Length. 100 in. Stroke. 7.88 in. Throat Depth. 16.15 in. Rapid Approach Speed. 394- 4.25 IPS. Pressing Speed. 00394- 520 IPS. Return Speed. 788- 7 IPS. Shipping Point: PA Price: $79.500.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 28502. PEXTO(LVD) HYDRAULIC PRESS BRAKE MODEL: 77-BH-08 SERIAL NUMBER: 76170 GENERAL SPECIFICATIONS Capacity: 77 Tons Overall Length Bed and Ram: 98" Distance Between Housings: 79" Stroke(Maximum) 4-3/4" Adjustment of Ram: 4" Closed Height: 7" Open Height: 11" Throat: 7-7/8" Width of Bed: 2-3/4" Speeds Advance: 280 IPM Pressing: 24 IPM Return: 140 IPM EQUIPPED WITH 9 HP Main Drive Motor Sectional Ram Clamps Approximate Weight: 9500 Lbs. F.O.B. Cincinnati. Ohio 45223. PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store ... morelisting. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 www.cwwood.com info@cwwood.com 800-745-6008 Payment Information We accept Visa. Master Card, Discover, Paypal, Bank Wire Transfers and Checks. Although we do accept Paypal. We prefer other forms of payment. Shipping Information Domestic: We ship freight collect with Dayton Freight. Matson America, or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Dayton Freight: 800-860-3210 Matson America: 850-562-8592 International: All international shipping is to be set up by the buyer. Recommended Custom Built Crates: 513-248-4422 Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item Any item purchased with a pick up or delivery date more than 10 days from date of sale may be subject to a storage fee. please discuss with seller before purchase Return Policy We accept returns within 30 days from the shipment date of any machinery and equipment sold with return privilege. F
We recently acquired a Greenerd 7 Ton Press Model HPB-7. The press is in good shape and appears to be complete and in working condition. We have not powered it up at our facility. This is sold"AS-IS-WHERE-IS" We do not have a lot of knowledge with this type of equipment. If you are looking at this ad, you probably know more than I do. Please let me know if you have any questions or wish to see additional photos. Buy It Now price includes standard skidding. Once checkout is complete and item has been paid for we will skid and provide you with the weight and dims. You can provide your own carrier to ship on or we can shop quotes as well. If we quote the freight, a separate PayPal invoice will be sent and this will need to be paid before a pick up is scheduled.
Used HPM 50 Ton C Frame Hydraulic Press Machine: Model 3008S-7X24S Serial#21327 Capacity: 50 Tons 24" of Stroke Operator's Levers Machine is in Good Working Condition. In Plant. Under Power. Demos Available Upon Request Buyer is Responsible for Freight& Rigging. FOB: Madera. CA 93638*Machine is Sold"As-Is. Where-Is" with No Warranty Expressed or Implied. Customer is Responsible for Equipment Inspection Prior to Shipment.
Hello. This is a nice pre-owned Enerpac MS2-20 Hydraulic Maintenance Set, used for rescue and many other applications. This is a heavy item an will have to ship freight on a pallet, One is offerd up new on ebay for $2800 Great bargain here! Also free shipping to a business address in the lower 48 states only. If residential or your need a lift gate add $100. All elst regular shipping applies. Please contact with any questions. Thank you,
SPX Power Team 10 Ton"H" Frame shop press with electric hydraulic pump. Uses standard 115 volts. Works great. See pics showing retracted and extended modes along with full pressure and hold mode. This is the floor model. No press plates are included. Aluminum plates shown are just to demonstrate operation. Specifications: Capacity 10 Tons Stroke 10" Pump Type Electric Model PE102 rated 10.000 psi Dimensions: 66" tall measured at top of gauge 28" deep at the floor 36" at widest point incl. pump 21" between uprights The head can be moved anywhere between the uprights and rated at full 10 tons thru out range. There is no charge for local pick up. This item will ship via freight. Freight charges based on your location and ships from 92084. Shipped weight is approx 250 lbs. Contact me with any questions. This ... moreitem can be inspected before purchase by appointment. This item is also available for sale locally so don't hesitate.
VINTAGE 1951 KR Wilson 75 Ton Hydraulic Press SOLID STEEL CONSTRUCTION WEIGHT UNKNOWN NOTE: ALL ESTATE ITEMS ARE DESCRIBED TO THE BEST OF OUR KNOWLEDGE We try to disclose anything that will impact value and desirability of each piece. The Age and description stated are our opinions based on our experience in Mid Century Furniture And Collectibles. You the buyer are ultimately responsible for agreeing or disagreeing with our opinions BEFORE BUYING. Pictures are of the actual items being sold. ALL ITEMS ARE SOLD AS SHOWN.
This listing is for a Chicago press brake. Max material width 4' 7.5hp hydraulic unit 230/460 3phase 4 way V block and upper V die included 44" overall usable width Foot Control Unknown Tonnage Overall Width 7' Overall Height 102" Approx Weight 4500lbs. This machine is in used condition. But looks to be fully functional. This unit has not been tested. The motor was previously hardwired. So there are no motor controls. This unit shows normal wear. It has been repainted and the paint is flaky in places, see pictures for details. Please ask any questions we would be happy to help. Local pick up is encouraged for these larger items. We can load this on your truck or trailer. Buyer is responsible for all shipping arrangements. Payment is due within 5 days of auctions end and pick up is expected within 2 weeks unless other arrangements ... morehave been made. Ohio residents will have to pay a 6.75% sales tax. We have a 14 day money back return policy with the buyer paying the return shipping. Check out my! Thanks for looking.
Starts and runs quickly and without any weird noises or unexpected actions. Guaranteed not DOA. Local pickup in Wichita or Truck ship or U-ship. Hello Shopper! We want to provide 20 gold star service every time. We 100% unconditionally money back guarantee all items to be authentic and exactly as described for 10 days from ship date. We take these photos at time of sale unless noted. We are not experts in the items we offer so please look over the photos carefully. You can click them for larger versions. If it's not in the photos. It's not included(even if you think it should be) All items sold"as is" If the item is not as described we will make it right. Because of dishonest buyers that came before you we rarely reimburse partials and never based on what it would take to replace it, or what you"would have bid" ... moreor think"it's really worth" but as a percentage of"not as described" and at our discretion. We will probably have to get the item back and resell it. If it was obviously our fault we will probably pay the return shipping even. Look the pics over carefully. We're looking for honest folks to trade with. Scammers and fb extortionists, please move on to another listing. We just don't even want to play that game. Text or call 316-444-0411 Powered by SixBit's eCommerce Solution
Up for this no reserve auction. An electric powered hydraulic press. the press is powered by a Leeson 3HP single phase electric motor(220 power) The Leeson powers a hydraulic motor,connected to a hydraulic switch, which powers a hydraulic ram. The unit was hand made to crush oil filters off of big rig trucks. It could be used for other uses as well. The pressure gauge goes to 5,000lbs pressure(not sure of the actual operating pressure) The unit needs to be plugged into an electric switch(it justs plugs into the power plug, no switch on it.the switch was attached to the wall in the shop it came from) The unit is in good used working condition. the unit came from an auction of a big rig repair shop in Kings county California. The item is listed as local pick up only because it weighs over 200lbs and has hydraulic oil still in the reservoir. ... morethanks for looking.
Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2905(1) Used 75-Ton HPM 4-Post Hydraulic Press; S/N 41-240 Specifications: Capacity.75 Ton Bed Area.48" L-R x 29" F-B Slide Area. Distance Between Posts.29" L-R x 29" F-B Stroke.9" Daylight.25" Distance Floor to Bed. Tie Rod Diameter. Number of Ram Cylinders. Type of Ram Cylinders. Diameter of Ram Cylinders. Ram(Slide) Speeds: Pressing. Advance. Return. Hydraulic System: Manufacturer& Type. Power& Pressure. Fluid Capacity. Line or Gauge Pressure.2.300 lbs. Electrical Characteristics. Equipped With: Complete Electrical Controls Complete Hydraulic System w/ Reservoir/ Tank Overall Dimensions.48" W x 103" L x 44" H. F.O.B.Casa Grande. AZ. Please contact us about shipping rates before ... moreyou request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engine
juicepressfactory Here's the description from the manufacturer. This item is in great condition. Always cleaned well. Comes with extra filter paper and everything you need to juice. Call us at: 1-888-588-7348 Our Hydraulic juice presser is used to properly extract pulp free juice from freshly ground up fruits and vegetables. Utilizing this method will extract more volume. Mo re enzymes. Minerals and nutrients. Recommended by Gerson Institute and it is a great alternative to Norwalk. Note: A Norwalk juicer is a two step juicer as well. Not a one step operation. Separate steps: Step 1- Grind. Step 2- compress pulp with hydraulic press. Five good reasons why our press machine is better than the competition! 1) Stainless steel(food grade) food trays- not plastic blocks. 2) Frame is all welded construction- not bolted together. 3) Powdercoated ... moreframe( it is a baked-on finish) not painted. Polyurethane powder is baked into the pores of the metal frame. This type of finish does not peel, chip or crack. Example: p owder- coating is used on playground equipment. This process is more costly than paint. But it is worth it! 4) W e use return springs under the lower stainless food tray. The springs will return the tray to the lowest position when juicing/pressing is done. 5) We make the press machines here in Texas for more than thirteen years now. ours is not imported from overseas- We are here for you if you have any questions. Need help or need any parts in the future. NEW PRODUCT! HOMOGENIZING NOZZLE FOR CHAMPION JUICERS. $37.50 Available in black or white. The homogenizing nozzle is a 1 piece nozzle with no cutout on the bottom of the nozzle. Leak proof. Keeps juice and pulp together. Reducing friction and heat. can not be taken apart. Easier to clean up. It is made specifically to make the champion a grinder only. Note: this nozzle does not fit champions older than 10 years old. Call us with your Champion's serial number and we will check compatibility.
I can deliver for $1.50 per loaded mile. Item is located at 49072
Tonnage: 12, Bed Size(L-R. F-B) 20" x 16" Stroke: 6" Daylight: 14" Throat: 9" Ram Size: 4 1/4" Ram Speed: Down: 490 ipm, Ram Speed: Return: 800 ipm, Strokes per minute@ 1/2" Travel: 310, Strokes per minute@ 2" Travel: 85, Strokes per minute@ 6" Travel: 34, Type: C-Frame, Dimensions(LxDxH) 26" x 46" x 77" Weight: 3000 LBS, Read more:
Old Building Find) antique cider press that is huge I bought a building and they made wine and juice products etc. I have no need for the press it's nice for someone that's needs it or wants to refinish it and put it in a show or something don't know anything about it but it was made in the early 1900's I got this'll title information from the company who made it(The Hydraulic Press MFG Co. Thanks for looking and bidding PICK UP ONLY
SENCORP SYSTEMS 02.50JJ2HLTS33 0.500 HYDRAULIC CYLINDER 3000 PSI ENV PRESS Click Images to Enlarge ​SENCORP SYSTEMS 02.50JJ2HLTS33 0.500 HYDRAULIC CYLINDER 3000 PSI ENV PRESS COMES AS SHOWN MADE IN U.S.A WEIGHT: 18 LBS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 20 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 ... morelbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and
Made by Silfradent- Italy, The full-metal structure is cast in one step to whistand heavy-duty usage, With minimal care. The machine can be a lifelong investment The thrust table and the absorbing potential of flask advised by the manufacturer, It is sufficient to operate between 4000 and 7000 kg. Technical Features: Total distance between the two plates: 24 cm, Full-cast metal for heavy duty usage, Pressure gauge with glycerine, Maximum capacity: n. 3 flasks + n. 1 bracket, Sliding space of the plate: 2.5 cm, Dimensions 21.5x19x47, Weight: 23 kg,
Nice hydraulic juice press. Custom made by popular ebay seller. I asked him to stain it to match my kitchen décor. It works great but takes up too much space on my small counter. I used a couple times but could not work around it in my space. It needs a new home:
This auction is for a Precision screen printing press. It is a 8 color. 16 station unit. Runs 3 phase electric and is hydraulic automatic. We have printed a 1 color design on this machine about a month ago. Needs to be calibrated in order to do multiple color designs. If you have any questions, feel free to send us a message and we will get back to you with an answer as soon as we can.
You are buying one item. This unit is used. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: B-98 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff and we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS ... moreRIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jun-21-13 at 15:12:55 PDT. Seller added the following information:
You are bidding on a used Electric Hydraulic H Frame Shop Press with Hushh Pup and safety cage. 110V 25 ton safety cage Palm Tree Cat#L-0000-062914-A Bid with Confidence on this item. Check our feedback! All information deemed accurate but may vary from model to model. Call Larry for any questions you may have. Call 401-965-5557 or Email: Larryrazza@hotmail.com_ Equipment Financing Available Through These Fine Leasing Companies: Online leasing applications(get monthly payments) FIRST LEASE https:id51.securedata.net/firstleaseonline/creditapp/Direct_Credit_App.html DIRECT CAPITAL LEASING http:ebay.directcapital.com* Please Note: Not all machines may qualify for Leasing. Payments: We accept company checks and Major Credit Cards. SHIPPING: Contact us for great rates on shipping. We always get better rates. Please email us for a rigging and shipping ... morequote(just include the zip code when inquiring and if you have a loading dock or if you are a residential delivery. Thanks) Email: Larryrazza@hotmail.com or call 401-965-5557. We also ship worldwide. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal. Change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer's purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold“as is” INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms. Operator safety devices or safety guards as required by OSHA or otherwise. It is the use
Dayco NP60 hydraulic hose crimper with the standard six die sets. And two others that probably don't even go to it. I would prefer if you'd make your own shipping arrangements. But I can handle LTL shipping if necessary and will add freight cost to the bill.
Item: CUSTOM Daniels DMC HX4 M225205-01 Hand crimmper with Hydraulic Air Press Item Condition: USED. Both units work good. Previous owner custom made the Hydraulic press
This listing is for an Enerpac 4 post press. 300 Ton Cylinder 3HP Enerpac Hydraulic Pump 230V 3PH Double acting Cylinder Model R30012 12in Cylinder Stroke 600.000lb. Enerpac Gauge Hand push button control 21" Between Posts This unit is used and in good condition. The cylinder. Pump, hoses, and gauge are all manufactured by enerpac. The press frame does not have a tag, but is very well built. See pictures! If you have any questions please ask. Local pick up is encouraged for these larger items. We can load this on your truck or trailer. Buyer is responsible for all shipping arrangements. Item can be banded to a pallet if needed. If you are shipping via freight we will need the required paperwork in advance. Payment is due within 5 days of auctions end and pick up is expected within 2 weeks unless other arrangements have been made. Ohio ... moreresidents will have to pay a 6.75% sales tax. We have a 14 day money back return policy with the buyer paying the return shipping. Check out my other items! Thanks for looking.
4 Post Down Acting Hydraulic Press Capacity 200 Tons Bed Area 50" FB x 85" LR Between Post 30" FB x 65" LR Shut Height 28" Stroke 37" Bolster Plate 50" FB x 84"LR Equipped with: Allen Bradly Control Price: $29.500.00 FOB Battle Creek Michigan warehouse- not under power Feel free to contact me for more photos or to arrange an inspection Please note: This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition" no warranty FOB Michigan. All information is to the best of our knowledge. But, is not guaranteed please feel free to come inspect the machine to verify vital details. If the machine is not picked up after 30 days it will be considered abandoned and become property of Affordable Machinery to dispose at our discretion.
Here’s a BIG LOT! of Optima Spanntechnik HFS/HKZ Hydraulic Clamps for Metal Stamping Punch Press Die At least 12 complete clamp units + a big wooden crate full of partial/ parts units! some appear to only have some broken"Cable Trak" links)see pics. Closed metal stamping plant surplus If you have specific questions call us More information at this website- http:www.optima-spanntechnik.de/flexible-clamp-units.html Specifics- Optima Spanntechnik; Mod No: HFS/HKZ· Net Weight: 1235 lbs. as pictured) May be inspected at our facility Compare at $BIG$ new. PLEASE NOTE WELL: If you don’t have the $$$ to pay for this item within 3 DAYS of purchase– Please DON’T press the“Buy It Now” button. Free Credit and Free“Lay-a-Way” are NOT included. Item will be relisted for sale to a $ buyer if not paid for in 3 days… Free Loading For Buyer ... morePick Up! OR Add $29 to stack palletize items on approx. 36”x 64”x 36"H. crate/ pallet at approx. 1300 lbs. for shipping by buyer’s common carrier from zip 44440 We NO LONGER arrange for common carrier shipping directly! Here's why- Your delivery address DIRECTLY affects shipping cost. Is your delivery address a"COMMERCIAL ADDRESS" Just because you run a business from your home or operate a"for profit" farm does not constitute a"COMMERCIAL ADDRESS" it is solely at the digression of the trucking company. Your business may be too far off the"beaten path" as well) Do you have a loading dock? Do you have a forklift? Do you require a truck with a lift-gate to deliver your item? This all affects shipping cost! We have been"BACK CHARGED" by carriers so many times in the past because buyers LIED about the status of their delivery address that we simply WILL NOT arrange common carrier shipping anymore. Also some carriers(i.e. Roadrunner Transpt. New England Motor Freight) are requiring items to be packed in a FULL WOOD CRATE. They say this is due to damage claims but it is really because they want to pile someone else's stuff O
This document along with others I'm listing is from my great grandfather's records from the Buckeye Firebrick Company of Scioto Furnace. Ohio. He was the 3rd superintendent of the brickyard until it closed in 1933/34. My father lives at the old brick yard boarding house and tore down an old garage and found several thousand documents that were stored in files under sawdust. He is the owner and I am listing these documents for him. This document is about 7.25 x 8.25 inches. There is no reserve. Buyer to pay shipping and handling. I use a Flat rate shipping fee of $5.60 or first class shipping rate. If you purchase several documents I will mail them all together so wait until I send an invoice. Will mail internationally priority or first class. Just let me know what type of shipping you desire and please do not complain about shipping ... morecosts on my feedback. You do have a choice. All letterheads are mailed in sheet protectors unless using a regular envelope. See my other auctions for documents from other US towns and Railroads.
RAMCO INDUSTRIAL PRESS 50 Ton Hydraulic H-Frame. Used This RAMCO INDUSTRIAL PRESS is Used. But has been sitting in storage for a number of years. We have no idea if it works or if everything is here. We found this Snap-On Pump? that we believe was used with the PRESS. So we are including it. If it doesn't belong. You don't have to take it. Over size is approximatel;y 6' tall. 32" wide and 3' deep. If item needs to be secured on a pallet for shipping. There will be an extra $50 fee. LOCAL PICKUP ONLY! Conditions: Payment for the item must be received within 14 days from the end of the auction. Unless other arrangements are made with the Seller such as payment upon pickup. Preferred Payment can be made at time of pickup. The item must be picked up with 30 days from the end of the auction unless other arrangements are made ... morewith the Seller. The Seller will not ship these items or make arrangement for these items to be shipped. Employees are available to assist Buyer with the pickup and loading of the item. If applicable. The school has a fork lift and operator to assist with the loading. The Buyer will be responsible for the securing of the items for transit. If payment is not made within the specific period of time or other arrangements made. The Seller reserves the rights to file a non-payment report with Ebay, and relist the item or offer the item to the runner-up bidder. In order for the school to hold or store the item for longer than 30 days. Payment must be made in full within the specific time period. The Seller must be notified of the pickup a minimum 24 hours in advance. The school is opened for pickup. Monday through Friday, from 7 AM to 3 PM. All International payments MUST be made through PAYPAL for the protection of both parties The school offers no warranty or guarantee. The buyer is purchasing this item" AS IS. WHERE IS, WITH ALL FAULTS" All items can be seen at the school during normal business hours. Monday thru Friday from 7 am to 3 pm, by contacting Gene Speranza at
Hydraulic-Press Brick Company. 1 Share, 1940 Same shipping cost for 1-5 Items! History of the Company: Great for decoration or collection! This Share is Cancelled there is no real vaule. Just Collector's value. The whole document is not visible in the picture. It is bigger than my scanner. So the edges are not shown, but is in nice condition. You receive the same Document what seem on the pictures. I do Combine shipping! Just wait for my invoice or Request Total before Pay! 1- 5 Items 7 Dollars 5- 10 Items 8 Dollars 10 + Items 9 Dollars 20 + Items 12 Dollars I send all items as Registered mail with tracking number. If you buy more than 150 Dollars we offer you Free Shipping worldwide. THIS SHIPPING RULES ONLY FOR SHAREAS& BONDS! If you'll need anything from Hungary. Just ask and we will try to find it for you! by adding my eBay ... moreStore to your Favorites
For Sale! NICE AMADA RG 5020-LD 55 TON 2 AXISX CNC HYDRAULIC PRESS BRAKE(OC340) Specifications: 1999 AMADA MODEL RG 5020-LD 55 TON 2 AXIS CNC HYDRAULIC PRESS BRAKE MODEL# RG 5020-LD SERIAL# 0198010097 2 AXIS CNC PRESS BRAKE MAX. TONNAGE: 55 MAX. BENDING LENGTH: 82" MAX. STROKE LENGTH: 3.9" OPEN HEIGHT: 14.57" THROAT DEPTH: 15.7" DISTANCE BETWEEN SIDE FRAMES: 59.84" RAM SPEEDS: APPROACH: 1.8" SEC BENDING: 33" SEC RETURN: 1.38" HYDRAULIC PRESSURE: 2630 PSI HYDRAULIC TANK: 13.4 GALLONS MACHINE WEIGHT: 6.440 LBS MACHINE DIMENSIONS: 75.3"H) X 79.5"L) X 54.9"W) CALL OR EMAIL FOR MORE INFORMATION. 1800 573 7019 General Information: You can preview unit at our warehouse in Southern. California. Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, Wire transfer, ... moredirect deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Toll Free#1800 573 7019 Text#714 658 5390 Fax#909 989 4107
For Sale! 12 TON DAKE NORTA-MATIC NORTON HIGH SPPEED HYDRAULIC C FRAME PRESS(OC343) Specifications: Tonnage:12 Bed Size(L-R. F-B)20" x 16" Stroke:6" Daylight:14" Throat:9" Ram Size:4 1/4" Ram Speed: Down:490 ipm Ram Speed: Return:800 ipm Strokes per minute 1/2" Travel:310Strokes per minute 2" Travel:85Strokes per minute 6" Travel:34 Type:C-Frame Dimensions(LxDxH)26" x 46" x 77" Weight:3000 LBS CALL OR EMAIL FOR MORE INFORMATION. 1800 573 7019 General Information: You can preview unit at our warehouse in Southern. California. Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, Wire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. ... moreCall or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Toll Free: 1800 573 7019 Fax: 1800 573 7019 Text: 714 658 5390
HYDRAULIC MECHANICAL PUNCH PRESS DIE SHOE + LAMINA COMPONENTS 5-7/8" x 5" Click Images to Enlarge ​HYDRAULIC MECHANICAL PUNCH PRESS DIE SHOE + LAMINA COMPONENTS 5-7/8" x 5" DISTANCE BETWEEN POSTS: 2" MOUNT: 1-1/2" 50-16 WEIGHT: 22 LBS CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 24 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 ... moreHandling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgepo
DANLY 5-1/2" x 6-3/4" 2.91 MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE Click Images to Enlarge ​DANLY 5-1/2" x 6-3/4" 2.91 MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE 1-1/2" MOUNT BETWEEN POSTS: 2-1/4" MEASURES: 8" x 6" x 8" WEIGHT: 23 LBS COMES AS SHOWN CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 25 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs ... moreneeding standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from
DANLY 0303-D1 4-5/8" x 5-1/2" MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE Click Images to Enlarge ​DANLY 0303-D1 4-5/8" x 5-1/2" MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE MOUNT: 1" DISTANCE BETWEEN POSTS: 2-1/2" WEIGHT: 13 LBS CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 15 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling ... morefee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mituto
6" x 7" DIE SHOE MECHANICAL& HYDRAULIC PUNCH PRESS Click Images to Enlarge ​6" x 7" DIE SHOE MECHANICAL& HYDRAULIC PUNCH PRESS DISTANCE BETWEEN POSTS: 3" 2" MOUNT MEASURES: 13" x 10" x 11" WEIGHT: 46 LBS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 48 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A ... more$4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tool
10' x 16 GAGE ROTO-DIE MODEL 15 HYDRAULIC PRESS BRAKE 4 WAY BUILT-IN BOTTOM ROTATING DIE S/N: 80707 INCLUDES: 1x 10' DIE IN MACHINE AND 1x 6' DIE SELLING AS IS WHERE IS SHIPPING AND RIGGING CHARGES ARE THE RESPONSIBILITY OF THE BUYER
NIAGARA 12' x 135 Ton Hydraulic Press Brake. Model HBM-135-10-12, Autobend 10 CNC Control, Shadow IV Light Curtains, 8" Stroke, 7" Closed Height, 15" Open Height S/N P52926- MFG. Date: 1990 Capacities on 60.000 PSI tensile strength 3/16" thick material over 1-1/2" bottom die@ 11' length. 1/4" thick material over 2" bottom die@ 7'6" length. 5/16" thick material over 2-1/2" bottom die@ 6' length SELLING AS IS WHERE IS SHIPPING AND RIGGING CHARGES ARE THE RESPONSIBILITY OF THE BUYER
35 ton hydraulic punch press. All tap and dies included
1000 ton x 18' Cincinnati Model 1000 Hydraulic Press Brake(1979) 1000 Ton. 18' Between Housings, 22' Overall Specifications and Equipment Nominal Rated Capacity: 1000 Ton, Bending Capacity: 1" x 15' Over 10" Die) Overall Length of Bed and Ram: 22' Distance Between Housings: 18' Stroke: 18" Throat Depth: 36" Rapid Advance: 70 IPM, Fast Press: 35 IPM, Full Tonnage Press: 14 IPM, Fast Return: 60 IPM, Contact Mark Harris at 773-290-1724 or mark@assetexchanginc.com to get more information on this rare 1000 Ton Hyd. Press Brake
DANLY 150 TON HYDRAULIC'C' FRAME PRESS 14" THROAT 24" UNDER RAM 32"x43" TABLE SELLING AS IS WHERE IS SHIPPING AND RIGGING CHARGES ARE RESPONSIBLITY OF THE BUYER
Description: This listing is for a used SAE(Stamford Applied Engineering Inc. This tool is operated off of hydraulic pressure and controlled by a food petal. The tool seems to be in full and operational condition. Parts and pieces include the press, the foot petal, hoses and 2 mounting bolts. I couldn't seem to find a serial, catalog# on it. Any questions or comments don't hesitate to ask. Sold For Ludlum Measurements Inc. For Questions. Email: 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-147168090dd-0x106-
Press Machine Used, Enerpac Hydraulic Press Max PSIg 15.000 160 PSI W/ Foot Control, W/ Attachment Tools, 545 LBS, Condition Unknown, As is, Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you Return Policy Within 30 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, ... moreand is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
PLEASE CALL JIM FOR MORE INFO 7146121480
Sale is for One(1) USED REO QUINCY AIR OIL HYDRAULIC POWER PACK UNIT We don't know the pressure or flow on this unit the pump models are listed below The Ratio on these are traditionally 15:1 air in to hydraulic pressure This is used in good condition it has been tested and works The unit in the photos is the one you will receive This only comes with what is shown in the photos Air/Oil power units require only air to operate hydraulic cylinders. A large air cylinder is connected to a smaller hydraulic cylinder. Air/Oil Power units provide a simple. Inexpensive solution to hydraulic power needs. Spec's are; Manufacturer- REO QUINCY Model- 26008/9/10/11AO-23306K-1 Over-all length- 33" Over-all width- 22" Over-all height- 67" Hydraulic actual tank size-35" x 33" x 22" Weight-1383 lbs. w/skid W/O Skid-1283 ... morelbs We Combine Shipping ART001 Or pick-up at; 3145 Akron Road Wooster.Ohio 44691 Thanks Kurt
8" x 6-1/4" HYDRAULIC MECHANICAL PUNCH PRESS DIE SHOE Click Images to Enlarge ​8" x 6-1/4" HYDRAULIC MECHANICAL PUNCH PRESS DIE SHOE 4" BETWEEN POSTS 2" MOUNT WEIGHT: 45 LBS COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 46 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply ... morefor items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer us
6" x 8" METAL WORKING HYDRAULIC MECHANICAL PUNCH PRESS DIE SHOE Click Images to Enlarge METAL WORKING HYDRAULIC MECHANICAL PUNCH PRESS DIE SHOE ​6" x 8" APPROXIMATE 4" BETWEEN POSTS 2" MOUNT WEIGHT: 44 LBS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 46 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will ... moreapply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We o
6-1/4" x 7" MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE Click Images to Enlarge MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE ​6-1/4" x 7" APPROXIMATE DISTANCE BETWEEN POSTS: 3" MOUNT: 2-1/8" WEIGHT: 46 LBS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 48 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply ... morefor items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer
Postcard- used 1910- light wear.Shipping is 1.25 in the US 2.50 for airmail Powered by The free listing tool. List your items fast and easy and manage your active items.
Our internal inventory number on this product is LHM1# MN36-D. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Wyson& Miles Instructions for Installation. Care, and Use for the SH Series Hydraulic Press Brakes 40 ton. 60 ton, 90 ton, and 140 ton Models RH HYD Cylinder and Positive Gear Box Contents: Safety Foundation Cleaning Leveling Set-Up Die Installation Tonnage Chart ... moreRevised June 1987 Appears To Be A Copy Copyright: March 1987 It is(+/ 25 Pages. Seems complete and in generally GOOD used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $3.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $5.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless req
Here is a Factory issued Verson H 150 6 Hydraulic Press Brake Service Manual. This is a nice manual with a lot of service parts and main piece drawings as well as Electrics. Check out my other listings for older machine manuals. I have a bunch!
Dake 150 Ton Electric/Hydraulic H Frame Press Model 908150 s/n 186956 10HP Motor 230/460V 3ph. Currently wired 460V Weight is 3620 lbs Over $24.000 new today! FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: rigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate are additional charges. Item may be picked up and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged to check out this machine ... moreunder power at our Phoenix facility. Please contact us for an appointment.
This is a NICE ENERPAC 100 TON H FRAME PRESS WITH 10.000psi PUMP INCLUDED AS SHOWN. Free Shipping to commercial address in Continental US $20.000 New Retail!SAVE $$! GREAT DEAL FOR A 200.000LB PRESS! Single Phase. 115V. HERE'S A VIDEO OF IT WORKING: This is a nice clean unit for the money. Has a small leak sometimes around the bottom of the cylinder I think? and no small ram/lift for H bars included. But works great! Supper nice. Clean unit! Comes as shown in pics! Thanks! Payment: All payments must be received within 1 day of the end of the auction. Seller retains all rights to withdraw an auction or deny sale of the merchandise. A Positive Feedback will be left for all successful transactions. By placing a bid on this auction. You agree to all the terms and conditions of the auction. If you have any questions or concerns please ask ... moreus before placing bids. PAYPAL only. Ship to confirmed/Verified address only. No Personal checks. Shipping: Item Shipped from: Portland. OR. TO COMMERCIAL ADDRESS ONLY. RESIDENTIAL IS AN EXTRA $50. LOWER 48 Only.All other destinations will be an extra charge. Thank you. CANADIAN BUYERS ARE RESPONSIBLE FOR ANY CUSTOMS OR BROKERAGE FEES APPLICABLE. Item will be shipped within Two business days from the completion of auction. Order will be processed within two business days. I ship to PayPal Verified/Confirmed address only. No Exceptions. If a package is returned to us due incorrect address or recipient non-availability to accept. There will be a shipping charge to ship package for the second time even if the original sale was shipped free of charges. Terms of Sale: Email confirmation must be received within 24 hours after the end of auction! Warranty through manufacturer if available. Please read the above terms.thanks.
60T Hydraulic Hose Press with 6 Dies-Slightly Used. A bit of surface rust from storage in an unheated building.
Hannifin 75 Ton Hydraulic Straightening Press 17" x 120" table 4" Quill Diameter 11" throat 220/440 Volt. 3 phase SELLING AS IS WHERE IS BUYER IS RESPONSIBLE FOR ALL SHIPPING AND RIGGING COSTS
75 Ton Dake Hydraulic H-frame press Traveling frame Pump Mdl. S/N_ 3 Hp 240 Volt 3 ph. Overall Dimensions: 66" left to right 66" front to back 96" overall height. Rolling bed is 34.5" x 96" x 32" tall. H-frame is 35" between uprights and 45" outside 40" pin centers horizontal and 8.5" vertical. 15" I-Beam for Cylinder with 45" daylight. Remote control pendant UNIT TIPPED OVER IN TRANSIT. WILL SELL AS IS FOR $6500) Needs minor plumbing. Straighten one upright(not kinked) factory cast crank for raising and lowering table was snapped off(needs replacement if you want cable to move table, otherwise you could attach cylinder like 50T Enerpac’s utilize) SELLING AS IS WHERE IS BUYER IS RESPONSIBLE FOR ALL SHIPPING AND RIGGING COSTS
Dake 928053 12-Ton C-Frame Hydraulic Bench Press General Info: Stock# CD-141090 Machine Name: Dake 928053 12-Ton C-Frame Hydraulic Bench Press Condition: Used. Good Tested: Yes. Good Working Condition Brand: Dake Model: 928053 Serial: 199613 Year: N/A Approximate Shipping Weight: 3000 Lbs. Approximate Shipping Dimensions: 60" L x 48" W x 67" H Location: Stone Mountain. GA Specifications: Dake 928053 12-Ton C-Frame Hydraulic Bench Press. 12 Ton Capacity, 5HP Motor, 460V, 3-Phase, 1800 RPM, 12" Ram Travel, 23" x 19" Table. Features: Adjustable return stroke. Activated by proximity switch, permits accurate control of ram movement Light-Sensitive thumb pads must be engaged simultaneously before ram will move and cannot be mechanically by-passed Hydraulic cylinders are manufactured to withstand 3000 psi. But are used ... moreat less than 2000 psi to prolong service life Remote pressure adjustment easily sets maximum pressure desired Run-jog selector allows fast. Easy job set-up Additional Info: Dake 928053 12-Ton C-Frame Hydraulic Bench Press has been tested and is in good working condition. This is the older model of their 28-612. They are very similar. Retails at $22000 new. Machine can be shown under power. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
Denison(Hydraoil Inc) Multi-Press 4-ton Hydraulic Press, Model DF4C01C18A59. Serial number 4678 3 hp. 220/440vac, 60 hz, 3 phase. Mounted on wheels. Purchased at auction- Liquidation sale. onsite) of a local company that went out of business. Local Pick-up preferred. Buyer must arrange Freight if Necessary. Weight 987 lbs $1000.00 Please contact for questions.
GENERAL SPECIFICATIONS Capacity 230 TONS Overall Length of Bed& Ram 12’ Distance Between Housings 10’6 3/4” Stroke 10” Open Height 17” Closed Height 7” Throat Clearance 8” Speeds Approach 155 INCH PER MINUTE Form 8-16-35 INCH PER MINUTE Return 175 INCH PER MINUTE Back Gage Speeds X- AXIS’ 1200 INCH PER MINUTE Main Motor Horsepower 15 EQUIPPED WITH 24” Cincinnati Heavy Duty Back gage Electric Foot Switch Pedestal Palm Button Station Manuals Interlocked Construction Clevis Mounted Self Aligning Cylinders Approximate Overall Weight 29500 lbs. Approximate Overall Dimensions 12’5”L X 60”W X 126 1/4” H Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
Verson hydraulic press. Serial 3041, stroke of slide 24 in, capacity 600 ton, shut heigth 32 in.
ENERPAC 25 Ton Hand Pump Hydraulic Pedestal Press P80 Hand Pump RC2510 Cylinder 0-50.000 gauge needs repaired/replaced needle fell off The cylinder does have a small amount of oil leak when first used. Press is 6' tall plus pallet and Gauge on top Everything is in working condition It has some spray paint overspray on it from being in a shop It has scuffs and dings but there are no repairs or major damage to point out other than the needle Has a short saddle on the ram as well(not shown in pictures) Will be sold as is where is so please inspect and or ask all questions prior to buying Bed is 11 1/2 Wide 12" Deep From top of bed to the bottom of the saddle is 16 1/4" From the Center of saddle to the back beam is 6" Opening in between the the bed legs is 6" Brock 309-714-2220 I can help with shipping threw YRC or any ... morecompany for that matter( I do not know the exact weight) Located in Geneseo IL 61254 Will be able to help load
CLEANING OUT THE WAREHOUSE* You are bidding on one HANNIFIN CHICAGO 40-TON HYDRAULIC PRESS. To the best of our knowledge this item was fully functional when removed from service. But has been in the warehouse for approximately one year. All sales are"as is. PLEASE SEE PICTURES. If you have any questions please email us(we will respond to all inquiries quickly) or call 419-782-9990. We want you to be fully informed. All sales are final. We must have payment within 7 days of the end of the auction. Please check out our other auctions. Thank you for looking. NO PAYPAL. PREFER CASH AT PICKUP OR WILL SHIP WHEN THE CHECK CLEARS THE BANK. IF WE SKID AND SHIP. ADD $75(ALL FLUIDS WOULD HAVE TO BE DRAINED WHERE APPLICABLE) SHIPPING MUST BE ARRANGED BY THE BUYER AND THE BUYER PAYS ALL SHIPPING COST.
Up for sale is a KR Wilson electric hydraulic 30 ton press. It was removed in good working order and will come as shown. Some of the hoses were recently replaced and it has been well cared for. We are moving out of our shop and no longer this. It is mounted to a thick steel plate. Which will be included. I have a dock and can load onto your truck or trailer. It has been disconnected and is ready to go. We are located in zipcode 17408.
Kendrick Manufacturing Co. 1892 Carbondale. Pa. Smith's Patent Hydraulic Filter Press.invoice. Please ask questions and please no mailing outside the USA without a mailing quote. Positive feedback left after positive feedback is received. Buy more than one invoice or letter in a 2 day period and receive 10% discount on second and following purchases in the time frame with same day payment.
Hi. Up for sale is a used Die Shoe for Mechanical or Hydraulic Press. It is in good working condition 8 in x 5.5 in. Collapsed height 5.5 in Stamp and cut Die system. It produces 18 mm round pieces. Included in the sell Runs smoothly and tightly. IT is set up as a system to produce something( I don't know! It was taken out from a Jewelry manufacturer Accept return. 100% money back, minus shipping. Thanks
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This is an original vintage c.1930 catalog of Mount Gilead brand cider and fruit juice presses. Orchard equipment, fruit processes machinery and related products issued by The Hydraulic Press Manufacturing Company of Mount Gilead, Ohio. This catalog is a two hole binder with soft covers containing about 26 different sections with each section being a different brochure or catalog sheet printed on slick glossy paper measuring about 8.5” x 11” The title page reads in part: Mount Gilead HYDRAULIC FRUIT JUICE PRESSES AND AUXILIARY EQUIPMENT CATALOG 80-A there is an index at the front that divides the catalog into three main sections including Orchard and Custom Presses. Commercial Presses and Auxiliary Equipment. Equipment featured in this catalog ... moreincludes Orchard Presses. Hydraulic Cider and Juice Presses, Commercial Cider and Vinegar Presses, Apple Graters, Pasteurizers, Evaporators and lots more. I don’t find a date on this catalog but it is a vintage original that looks to be from the late 1920s or early 1930s. This catalog is fully complete and well intact with some modest dust staining and light wear. Overall condition is very good. Email any questions. Thanks for looking. Payment Terms Winning bidders will receive an email at the end of the auction explaining the option for paying with Paypal. If you have questions about how to pay for this item please let me know. If you made multiple purchases for a single shipment contact us for combined shipping charges which will normally be less than the amount shown on Paypal invoice. You will receive an email notifying you when your item ships. Buyers outside the USA. Please provide a telephone number for customs forms. Shipping Terms Please click on the Shipping& Payment tab above to access the eBay shipping calculator which will give you the options and costs for shipping your item depending on your zip code or country. Our shipping charges are based on actual
25 ton enerpac press
K.R. Wilson 75 Ton H-frame press with Model# 37F. S/N: 10428-001 42" L-R Inside Uprights 9-1/2" F-B Inside Bed Rails SELLING AS IS WHERE IS SHIPPING AND RIGGING CHARGES ARE THE RESPONSIBLILTY OF THE BUYER
GREENERD 30 TON AIR OVER HYDRAULIC PRESS MODEL: CPA-30 This press is in great condition. I hooked air up to it and everything seems to work correctly. The pressure adjustment and hand controls all function properly. There are minor signs of wear. Mostly all cosmetic. Barely even used. Well maintained, previously owned by UCF FEATURES: Heavy 4-post frame provides maximum rigidity and minimum deflection for accurate parts and long tool life. Front mounted pressure control and gauge allow tonnage adjustment in seconds. Dual Palm Button control: Anti-tie down. Non-repeat controls with ring guards; conforms to OSHA. No electric motor or hydraulic pump; eliminates the need for electric power. Virtually maintenance-free. Quiet operation. This item is being sold local pick up only due to its size. Buyer is responsible for all shipping arrangements. ... moreA pick up time will need to be scheduled. We can provide a pallet and load on your truck or trailer. PLEASE READ BEFORE BIDDING WINNING BUYER MUST CONTACT US BY PHONE OR EMAIL WITHIN 48 HOURS SOLD AS IS. WHERE IS, ALL SALES ARE FINAL $500 DEPOSIT THROUGH PAYPAL WITHIN 48 HOURS(NO EXCEPTIONS) BALANCE MUST BE PAID WITHIN 7 DAYS OF AUCTION CLOSE BY CASH. BANK WIRE, OR CASHIER'S CHECK ONLY(BUSINESS OR PERSONAL CHECKS MUST CLEAR FIRST BEFORE REMOVING MACHINE) LOCAL PICK UP ONLY. PICK UP MUST BE MADE WITHIN 4 WEEKS BUYER IS RESPONSIBLE FOR SHIPPING THIS UNIT IS ALSO FOR SALE LOCALLY AND WE HAVE THE RIGHT TO END THE AUCTION EARLY IT'S THE BUYER'S RESPONSIBILITY TO INSPECT THE MACHINE BEFORE AUCTION ENDS. WE ENCOURAGE CUSTOMERS TO INSPECT MACHINE PRIOR TO BIDDING INSPECTIONS ARE WELCOMED BY APPOINTMENT ONLY ANY QUESTIONS OR INQUIRIES CALL 561-400-4556 DONT MISS OUT THIS OPPORTUNITY! SERIOUS OFFERS ARE WELCOMED! MOST OF OUR SALES ARE DONE BY PHONE OFFERS. SO DONT WAIT TILL THE END AND CALL TODAY! SE HABLA ESPAÑOL! INTERNATIONAL BUYER'S WELCOMED! IF YOU NEED A SHIPPING QUOTE CALL US AND ASK! Check out my!
Preowned 24' x 225 Ton PACIFIC Hydraulic Press Brake. Model: K-225-24 S/N A528(New 1986) Maximum tonnage Maximum punching tonnage Bending capacity Overall length of bed and ram Distance between housings Open height Closed height Maximum stroke Normal/Fast Press speed Rapid Advance/Return speed Bed platen width Throat depth Weight of bed(keal) Weight of ram Weight of frames(each) Weight of tank(empty) Approximate depth of pit required 225 ton 150 ton 19' x 3/16" 24' 20'6" 20" 8" 12" 35/90 I.P.M 191/188 I.P.M. 8" 18" 17.000 Lbs. 18.000 Lbs. 14.250 Lbs. 4.000 Lbs. 32" Equipped With To view a video of this machine under power copy& paste the following link into your internet browser: AUTOMEC Autogauge CNC1000 control of back gauge(24" capacity) Operator's remote control pedestal ... morewith two-hand control station for actuation of ram Dual remote electric foot pedals for run and up modes of operation Full complement of sectional upper die clamps Full length lower die rail Key lock selector switch for Off/Inch/Single Stroke. Manual Return/Single Stroke, Auto Return mode of operation Advance speed selector switch for Rapid Advance/Normal Press. Normal Advance/Normal Press. And Rapid Advance/Fast Press ram advance mode Key lock selector switch for pressure reversal On/Off Key lock selector switch for Anti-Whip On/Off Key lock selector switch for Hand/Foot mode of ram control Tonnage control to allow the operator to preset the force of the press to match the job and dies 30 H.P. 3/60/230-460 volt hydraulic pump motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 68.000 Lbs. We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
Espanol& English Speaking Sales Agents Available 1- 125 TON PHI HYDRAULIC ELECTRIC HEAT. WATER COOLED PRESS. 2- 18”x18” ELECTRIC HEAT. WATER COOLED PLATENS. MD: ST125/30-5 AB PLC 2- TEMPERATURE CONTROLLERS 5' RAM/125 TON ADJUSTABLE DAYLIGHT 240 VOLT ELEC. COMPLETE. JUST REMOVED FROM SERVICE LOADED ON TRUCK PRICE: $18.900USD FOB NY TERMS: PAYMENT FULL PRIOR TO SHIPMENT. PAYMENT METHOD: WIRE TRANSFER F.O.B: OH CONTACT: PEBSCOSALES@GMAIL.COM*PLEASE VIEW ALL PEBSCO INVENTORY FOR SALE ON EBAY BY TYPING IN"PEBSCO" UNDER ALL LISTINGS SEARCH BAR
Bought new in 2006 for $105.000.00 by the NIKE Co. Todays cost is $120,000.00. This unit is loaded and like new as you can see. Safety lights, high speed, table locks etc. Serial# 12131. Panel view PLC400/600 460 volt 32inches between post and a 17inch stroke 28inches between post from the side. Comes with stand, A36 Blanchard ground platen within.0005, hydraulic hold down locks, control cabinet with all AB drives. We were told this press can be upgraded to a 100 ton with new cylinder. 5inch thick platens and 3.5inch diameter post. Will load and secure onto your truck for free.
Home ~ Affiliations ~ Discounts ~ FAQs ~ Grading and Certification ~ Premium Shipping ~ About Us VINTAGE ART& ADVERTISING CURATED COLLECTIONS 1941 Ad Austin Co. Hydraulic Press Mfg. Mt. Gilead Ohio- ORIGINAL FT8 Details Year: 1941 Type: Original Print Ad Grade: Near Mint/ Very Fine Authentication: Dual Certificates Image: Grayscale Approximate Size(inches) 10.5 x 14 Approximate Size(cm) 27 x 36 Description and Condition This is an original 1941 black and white print ad for The Austin Company. Designers, Engineers and Builders, 16112 Euclid Ave. Cleveland, Ohio. The ad includes a halftone image of the interior of the Hydraulic Press Manufacturing Company plant at Mt. Gilead, Ohio. CONDITION This 70+ year old Item is rated Near Mint/ Very Fine. No aging. No creases. No natural defects. No surface rub. No tears. No water damage. To find ... moreother items from this specific collection in our eBay store. Please. Keywords specific to this image: Vintage Advertising. FT8A1C41 036698_FT8_282 Product Pricing& What We Deliver At times we receive inquiries about our pricing. Especially for vintage advertising or historical halftone prints, and are asked why our prices are consistently higher than some other sellers of similar items. For the first five years of our business, we asked our primary consumer base what they wanted. Our primary consumers- historical societies, historians, archivists, curators, university professors, historical decorators, and collectors, etc. have diverse and specific needs and we've built our business to accommodate those needs, like no other seller worldwide. Below is what is unique about how and what we offer as the world's leader in print ephemera: Product Packaging. Every product is placed against custom black acid-free board with crystal-clear. Archival protective closures. We are the only sellers in the industry who provide display-quality black boards with every item(which also make exceptional presentations for gift-giving) Oversized engravings are protected by museum quality tu
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2677(1) Used 20 Ton Hannifin Precision C-Frame Hydraulic Press; Downacting Specifications: Capacity(tonnage) Pressing.15 Tons@ 2.500 psi(nominal) Advance. Return. Bed Area.14 1/8" L-R x 11 1/2" F-B Ram Diameter.1 3/4" est) Stroke of Ram.9" optional 15" Daylight Opening.34" nominal) Distance Floor to Bed.31 5/8" Type of Ram Cylinder.Double Acting Diameter of Ram Cylinder.4" nominal) Ram Speeds: Pressing. Advance. Return. Hydraulic System: MFGR& Type. Power& Pressure.7.5 HP@ 2.500 PSI Fluid Capacity.20 Gal. est. Electrical Characteristics.230/460 VAC/ 3 Phase/ 60 Cycle Equipped With: Complete Electrical Controls Complete Hydraulic System Overall Dimensions.40 1/4" D x 29 1/2" ... moreW x 95" H Weight. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical,
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2509037 A: 0013000000CXCfg O: 0065000000RIhsF PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for an OTC Power Team 55-Ton Hydraulic H-Frame Press Industrial Shop Tool. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: OTC Power Team Model: 55-Ton Type: Hydraulic ... morePress Serial No: Unknown Features/Specifications: Ram Capacity: 55 tons Rail Width(inside) 36" Max. Height(inside) 48" Adjustable position ram unit Adjustable shelf(hand crank) Pressure gauge Shelf for hand pump(pump not included) Dimensions& Weight: Dimensions: L 60" x W 36" x H 82" Shipping Weight: 895 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Note: Unit does not included hand pump for ram Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational con
PLEASE NOTE! CLICK HERE to Email Nu Tek Sales! This listing is for a 6 Ton Schuler Hydraulic C Frame Press Model OGF-6. This machine was purchased in a group of machines. We have no real history on it. Our standard 30 day return will apply if any problems! Get more information or photos by clicking here: Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges of $150- Skidding or crating for freight shipment will be additional! OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
Inventory# FP2177 Manufacturer: JWI Model# 800G32-10-14 Cu.Ft. 9.5 Number Plates: 19 Plate Size(mm) 800 Gasketed/NonGasketed: Gasketed Style: Air Over Hydraulic OAD: 148"L x 44"W x 64"H Max Filtration: 100 Max Hydraulic: 3200 Plate Shifter: No Description: Used Filter Press All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-147490da54a-0x111-
EXPENSIVE CUSTOM 200 TON 3 WAY HYDRAULIC PRESS. 1 MAIN. 1 SIDE, 1 SHUTTLE TABLE PLEASE CALL JIM FOR MORE INFO 7146121480
MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE 2-75 5-1/2" x 4" Click Images to Enlarge ​MECHANICAL HYDRAULIC PUNCH PRESS DIE SHOE 2-75 5-1/2" x 4" MOUNT: 1" DISTANCE BETWEEN POSTS: 2-1/2" WEIGHT: 27 LBS COMES AS SHOWN WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 29 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling ... morefee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspect