In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
2750.00
Buy It Now
Condition: Used
Location: Houston, United States
$
350.00
Buy It Now
$125.00 Shipping
Condition: Used
Location: Bristol, United States
all you need to thread one die included
$
15.50
15h 30m 35s
3 bids
$10.25 Shipping
Condition: Used
Location: Ellington, United States
Hardinge Lathe Chuck Outside Jaws. For Hardinge 5" Scroll Chuck.
$
11.50
4d 16h 16m 47s
2 bids
$17.90 Shipping
Condition: Used
Location: Ellington, United States
5" Hardinge 5C Step Chuck. Includes Hardinge 5" Step Chuck Closer. 4-5/16" ID. No Reserve!
$
26.00
14h 50m 35s
3 bids
$10.25 Shipping
Condition: Used
Location: Ellington, United States
Hardinge TT Tap Collets. Approx Size Range. No Reserve!
$
9.95
4d 16h 50m 47s
1 bids
$10.25 Shipping
Condition: Used
Location: Ellington, United States
Hardinge Lathe Chuck Outside Jaws. For Hardinge 5" Scroll Chuck.
$
24.99
3d 6h 20m 50s
0 bids
$24.00 Shipping
Condition: Used
Location: Corona, United States
All the Hard work I put into making a living. them as honestly as possible.
$
9.95
6d 15h 33m 7s
0 bids
$17.90 Shipping
Condition: Used
Location: Ellington, United States
Hardinge Model "L" Expanding Collets.
$
21.50
14h 8m 35s
17 bids
$17.90 Shipping
Condition: Used
Location: Ellington, United States
Hardinge DA180 Collets. Not a set. Lot contains a few duplicate sizes.
$
9.95
4d 14h 26m 47s
1 bids
$10.25 Shipping
Condition: Used
Location: Ellington, United States
Hardinge TT Tap Collets. Approx Size Range. No Reserve!
$
9.95
4d 14h 22m 47s
0 bids
$10.75 Shipping
Condition: Used
Location: Ellington, United States
(1) Hardinge C10. Assorted Lot of Tool Holders. Includes Bushings & All Pictured. 9/16" x 7/8" Tool Slot. No Mount Screw.
$
9.95
15h 6m 35s
1 bids
$10.75 Shipping
Condition: Used
Location: Ellington, United States
Hardinge 5C Collets. Sizes Include.
$
64.99
Buy It Now
$14.38 Shipping
Condition: Used
Location: Middleburg, United States
Hardinge 22J Round Collet in Good Condition -- 1" to 2" -- 6 Sheaves -- Pull Down Menu CHEAP SHIPPING.
$
50.00
Buy It Now
$5.00 Shipping
Condition: Used
Location: El Monte, United States
16C
$
4250.00
2h 51m 58s
0 bids
Condition: Used
Location: Frederick, United States
FOR SALE: Hardinge Conquest T42 CNC Lathe Turning Center with Live Tooling Model#SGSS-42 Specifications: DATE OF MANUFACTURE 1997 MAXIMUM SWING 21.2" ... moreMAXIMUM TURNING DIAMETER 9" MAX. DISTANCE BETWEEN SPINDLES 13.1" X AXIS TRAVEL 5.31" Z AXIS TRAVEL(W/COLLET) 13.9" C AXIS MINIMUM INCREMENT 0.001º B AXIS TRAVEL(SUB SPINDLE) 11.5" RAPID TRAVERSE RATE X AXIS 472 IPM RAPID TRAVERSE RATE Z AXIS 630 IPM RAPID TRAVERSE RATE B AXIS 300 IPM SPINDLE NOSE(MAIN& SUB SPINDLE) A2-5 MAX. BAR CAPACITY 1.625" SPINDLE SPEEDS(MAIN SPINDLE) 50- 5.000 RPM SPINDLE SPEEDS(SUB SPINDLE) 80- 6.000 RPM SPINDLE MOTOR(MAIN/ SUB SPINDLE) 10HP/ 5 HP TURRET CAPACITY 12 STATIONS LIVE TOOLING SPEEDS 4.000 RPM LIVE TOOLING MOTOR 2.4 HP APPROX. DIMENSIONS(INCL CHIP) 125" x 70" x 67" MACHINE WEIGHT(APPROX) 10.000 LBS Equipped With: GE FANUC 18T CNC CONTROL Contact: biomedtool@yahoo.com Purchasing Information: Payment must clear prior to shipment or pick up Payment methods include wire transfer. Certified check, personal/business check and paypal Warranty: Machine is in good working order and tested Freight and Shipping: Shipping/Trucking charge is not included in the machine price We coordinate shipping for you with professional trucking companies About Us and Our Mission: We are a consortium of three divisions selling biomedical. Scientific and cutting equipment. We have hundreds of pieces of equipment available for sale. We have decided to start listing on EBAY. We make sure to have the equipment tested prior to listing them. You will be buying from a company that has partners in Pediatrics. Cardio, Veterinary Medicine, Scientific Research, Bio-Chemistry, Tooling, Cutting Companies, etc. Please feel free to message us at: biomedtool@yahoo.com;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f43aee3e4-0xff-
$
6500.00
Buy It Now
Condition: For parts or not working
Location: Wallingford, United States
This lathe was in storage for a year. There are a few alarms due to the missing components (see picture).
$
1950.00
Buy It Now
Condition: Used
Location: Myerstown, United States
Hardinge TM horizontal milling machine with rare vertical head. White dial machine. Over all nice used condition with signs of use consistent with age. ... moreIt is 3 phase and not currently hooked up. Sold as is, where is.
$
145.00
Buy It Now
$38.80 Shipping
Condition: Used
Location: Sicklerville, United States
Hardinge #"E" Production Cross Slide (Chip In Corner) Otherwise OK.
$
2450.00
Buy It Now
Condition: Used
Location: Minneapolis, United States
Hardinge HSL-59 Speed Lathe. Round 5c collets 1-1/16". Hexagon 5c collets 7/8". Square 5c collets 3/4". 5" (3) Jaw chuck. Nice machine that is ready to ... morego back to work. Inspect at our Savage warehouse or watch the video.
$
1450.00
5d 9h 6m 13s
0 bids
$38.99 Shipping
Condition: Used
Location: Schwenksville, United States
This steady rest fits the almost 5" wide bed of an HLV toolroom lathe. Everything works. Complete as shown. Including the bed clamp. Sold"AS ... moreIS" with no returns. Thanks for looking.
$
199.99
4d 15h 51m 34s
0 bids
$26.50 Shipping
Condition: Used
Location: Friedheim, United States
Up for bid is a Collet closer drawbar and some Hardinge collets. You get whats in the pics. The collets thread into the end of the drawbar. The drawbar/collet ... morecloser is not marked anywhere I see. The collets are marked Hardinge and there are 14 of them. They are not a complete set, there are gaps in the sizes. See the pics for measurements. SATISFACTION GUARANTEED with a one week return period, buyer pays shipping and insurance both ways if needed. Shipping will run $26.50 USPS/FEDEX/UPS in the continental, lower 48 states, USA. 
$
4999.99
Buy It Now
Condition: Used
Location: Watertown, United States
HARDINGE HLV-H SUPER PRECISION TOOLROOM LATHE S/N HLV-H-7213S BUILT 1978 SPECIFICATIONS: SWING OVER BED 11 in. SWING OVER CROSS SLIDE 6 in. DISTANCE BETWEEN ... moreCENTERS 18 in. SPINDLE 5C/ 4 º TAPER NOSE SPEEDS 125- 3000 VARIABLE TAILSTOCK 2 MT THREADING(27) INCH WEIGHT 1700 lbs. ELECTRICS 440/ 3/ 60 PRICE INCLUDES: NEWALL C-80 2-AXIS DRO· COOLANT SYSTEM· ALORIS BXA QUICK-CHANGE TOOLPOST& 5) HOLDERS· BUCK ZERO SET 6-in. 3-JAW CHUCK– OD JAWS ONLY· REAR SPLASHGUARD· ONE SHOT LUBRICATION TO WAYS· APPROX(64) 5C COLLETS– IMPORTED· DRILL CHUCK– ALBRECHT KEYLESS· LIVE CENTER- SKODA NEW SPINDLE REBUILD PRICE: $14.990 TERMS: DUE IN FULL PRIOR TO SHIPMENT F.O.B. FREMONT. CA(PREP& LOADING INCLUDED) NOTE: Machine was originally set up for 575 VOLTS. This machine has a trasnformer on it to run at 440V. If you need 208-220. You need to buy an additional transformer. We recommend buying a new transformer that will run from 575V down to 208. You would just take off the one that brings the machine to 440V. Call with any questions. Call or email us with any questions. The machine can be seen under power in our Fremont. CA showroom. We can help with trucking quotes if need be. Thank you for viewing our listing. We have few other machines in our ebay store and more on our website: Sincerely, PERFORMANCE MACHINE TOOLS. P.510.249.1000. Email:
$
650.00
Buy It Now
$141.30 Shipping
Condition: Used
Location: Watsontown, United States
This machinist tool is a Hardinge DV-59 Model "L" 6 Position Bed Turret, which is perfect for your metalworking needs. It has been well-maintained and ... moreis in great working condition. The brand name is Hardinge, and the model is Hardinge DV-59. This tool is ideal for individuals in the business and industrial field, particularly those involved in CNC and metalworking manufacturing. It falls under the Metalworking Equipment and Metalworking Lathes categories.
$
22500.00
Buy It Now
Condition: Used
Location: Bradenton, United States
Model: HARDINGE HLV-H-EM (1978). Precision Lathes. Spec Sheet.
$
149.99
Buy It Now
$18.40 Shipping
Condition: Used
Location: Watsontown, United States
HARDINGE CROSS SLIDE MODEL E RISER& D6 MULTIPLE TOOL HOLDER INCLUDED Very good used condition. As pictured. Payment due within seven days of purchase. ... moreCheck. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
$
299.99
Buy It Now
$29.99 Shipping
Condition: Used
Location: Lombard, United States
Vintage HARDINGE Bros. No. 2863 Lathe Compound Cross Slide Cataract. Used condition with dings dents and scratches. The back end has run in marks, as ... morepictured. In need of some cleaning and lubrication. Please see photos for details. Thanks for looking
$
11900.00
Buy It Now
$800.00 Shipping
Condition: Used
Location: Bristol, United States
Will come with a quick change post, drill Chuck, and live center. Beautiful lathe, well maintained, also our mechanic thoroughly checkouts all machines ... moreto make sure it’s good to go! Spindle has no runout, and ways are good! We so do can install a digital readout. See all pictures for the best description. Will be shipped on a pallet by truc via freight. Therefhecshioingid hftvesbetuhrrd
$
179.99
Buy It Now
Free Shipping
Condition: Used
Location: Cleveland, United States
ALL OUR AUCTIONS START FROM.99 CENTS@ THEPLACETOBUY1984! The Item You Are Bidding On Is a Hardinge Tool Post. With Overall Dimensions Including: Capacities ... moreMaximum: 29/64" Overall Dimensions: 1-15/64" W x 1-47/64" L x 1-1/4 H Returns are on unused items and all items are inspected throughly. THANK YOU FOR LOOKING!
$
250.00
Buy It Now
$7.15 Shipping
Condition: New – Open box
Location: Isanti, United States
Bilz Synchro Tap Adapter - size 4 3/8 tap. BILZ TAP COLLET WES 0 B 5/16. Nikken mk1-6 straight collet. Nikken mk1-8 straight collet. Nikken cck1-6 straight ... morecollet. Hardinge BS-38 Collet. 472" Round Smooth 47350018000002.
$
4950.00
Buy It Now
Condition: Used
Location: Cedarburg, United States
Hardinge Super Precision Toolroom Lathe. Spindle Nose Taper: Hardinge 5C. Collets and Tooling Included. SPEC'S SUBJECT TO FINAL INSPECTION. WE'LL DO OURVERY ... moreBEST TO MAKE IT SO! Model #: TBF-H. Swing Over Carriage: 9".
$
45.00
Buy It Now
$13.45 Shipping
Condition: Used
Location: Sicklerville, United States
$
4999.99
Buy It Now
Condition: Used
Location: Clare, United States
Spindle Speed: Step Pulley with VFD Drive for Motor. Collet Size: 5C. Collet Closer: Manual. Local Pickup: FREE.
$
1500.00
Buy It Now
Condition: Used
Location: Groveland, United States
6 POSITION TURRET. 440/3 PHASE POWER. QUICK RELEASE COLLET.
$
600.00
Buy It Now
$141.30 Shipping
Condition: Used
Location: Watsontown, United States
This Hardinge DV-59 Model "L" 6 Position Bed Turret is a great addition to any workshop. It has been previously owned, but still functions like new. The ... morebrand, Hardinge, is known for producing high quality, durable metalworking equipment, and this turret is no exception. With 6 positions, this bed turret is able to hold multiple tools at once, making it a time-saving and efficient choice for any metalworking project. The model number, DV-59, is also a well-known and respected choice in the industry. This turret falls under the categories of Business & Industrial, CNC, Metalworking & Manufacturing, and Metalworking Equipment, making it a versatile piece of equipment for a variety of metalworking needs.
$
1800.00
Buy It Now
$72.00 Shipping
Condition: Used
Location: Watsontown, United States
HARDINGE: steady rest for the hardinge 5" solid bed lathes. excellant to new condition. used only 2 x.paid over $800.00. i am retiring. Downsizing. ... morethanks 4 looking RICK
$
500.00
Buy It Now
$28.90 Shipping
Condition: Used
Location: Bensenville, United States
Cleaning out my uncle shop ex Grumman employed/ job shop. Used to build all the naval jets. We sold the lathe 3 years ago and just found a huge greasey ... morebox of goodies. lots of hardinge tooling. I wish I had one. Sbl fan Anyway. Slides nice and would be a nice asset to any production shop. Any questions feel free to ask. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14bd6eeee0c-0x104-
$
299.00
Buy It Now
$30.00 Shipping
Condition: For parts or not working
Location: Milroy, United States
Hardinge USA. you will need to clean and lubricate this before use. i have not oiled it or applied force.
$
425.00
Buy It Now
Free Shipping
Condition: Used
Location: Watsontown, United States
This 5" Hardinge 4 jaw lathe chuck 36-HC with taper lock mount is a reliable tool for your metalworking needs. The chuck is designed for use with CNC, ... moremetalworking, and manufacturing equipment.Featuring a brand name of Hardinge and model number of CHUCK 36-HC, this chuck is ideal for those in the business and industrial industry. The chuck is in great working order and will assist you in accurately holding your workpiece during machining.
$
1249.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Cleveland, United States
ER32 COLLET OUTPUT. VDI 40 SHANK. HARDINGE LIVE TOOL HOLDER. 1:1 DRIVE RATIO. Actual item pictured.
$
1498.99
Buy It Now
$18.99 Shipping
Condition: Used
Location: New Britain, United States
As shown in pictures. Inside measurement of base at top is 7"
$
199.00
Buy It Now
$69.95 Shipping
Condition: Used
Location: Grand Haven, United States
From a DV-59 we are retiring.
$
950.00
Buy It Now
$110.05 Shipping
Condition: Used
Location: Benicia, United States
NICE! USED HARDINGE RADIUS CUTTING ATTACHMENT MODEL C SHIPPING INFORMATION: Shipping Weight: 45 LB. Shipping from San Bernardino. Ca 92407 Handling Fee: ... more$2.00 per package SIGNATURE AT DELIVERY IS REQUIRED FOR ALL PACKAGES! SHIPPING ADDRESS NEEDS TO BE PAYPAL VERIFIED We only ship within the United States. We ONLY use UPS& US POSTAL for all our shipping needs. Please call us to get a shipping + packaging charges before bidding/finalizing your transaction. BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 5 business days of auction end. If there has been no contact/payment from the buyer within 7 days after the auction ends. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California CUSTOMER SERVICE: We do our best to present accurate information about every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location.
$
49.00
Buy It Now
$10.60 Shipping
Condition: Used
Location: National City, United States
Carriage Stop for Metal Lathe. Le Blond,Monarch, Atlas, Victor Look at the pictures. Is nice and tight 4 place multiple stop, ratchet click nice and smooth ... moreno returns
$
1999.99
Buy It Now
Condition: Used
Location: Watertown, United States
EARLY B.C. AMES 8-3/8" LATHE. CATARACT STARK HARDINGE DALTON RIVETT ELGIN. This is an B.C. AMES, WALTHAM MASS. 8-3/8" X 21" PRECISION BENCH ... moreLATHE, 1900-1930. 32" long bed. I don't have a tool post or tail stock center. As far as I can see everything moves freely and operates properly. Please let the pictures help with the description and condition and view my other auctions for more LATHES and TOOLING. Insurance is included in the shipping price. Free local pickup always welcome. I can most likely get you a better shipping price than Ebay's shipping calculator by using a different shipper. Give me a call with your zip code at 401-330-9303 thanks, Bill. Check my feedback, satisfaction guaranteed and will combine ship when possible. I have this advertised locally and reserve the right to end the auction at any time.
$
2500.00
Buy It Now
Condition: Used
Location: Watertown, United States
Gold International Machinery Corporation | Ternstorm& Swanson(HARDINGE TYPE) HSL SPEED LATHE Our Inventory Number: 8859-440 Technical Specifications: ... more208/220/440 V- 3ph- 60hz, Round 5C collet: 1-1/16" Hexagon 5C collet: 7/8" Square 5C collet: 3/4" Step chuck: 6" Jaw chuck: 5" Expanding collet: 3" 1720. RPM, Swing over bed: 9" Length of bed from face of spindle: 10" Estimated overall dimensions: 29" x 33" x 14" high, Estimated weight: 300 lbs. Equipped With: QUICK PRODUCTION 5C COLLET CLOSER, This item is in very good condition! We can palletize. Cover and load this item for an additional $125. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal
$
49.50
Buy It Now
$8.85 Shipping
Condition: New – Open box
Location: Brooklyn, United States
HLV-H, TFB, HC Variable Speed Motor Plate. Lathe or hardware not included. Product images are for display purpose only, item may vary.
$
16500.00
Buy It Now
Condition: Used
Location: Bradenton, United States
Model: HARDINGE HLV-H. equipped with Spec Sheet.
$
174.99
Buy It Now
$13.31 Shipping
Condition: Used
Location: Brazil, United States
HARDINGE LATHE HAND LEVER CROSS SLIDE OR SIMULAR LATHESWe don’t know anything about this except for what the tag says “fits Harding lathe” Moves freely ... moreside to sideWeighs 8 pounds FEEL FREE TO MAKE OFFER
$
47.00
Buy It Now
Free Shipping
Condition: Used
Location: Waterloo, United States
This is a Hardinge 10mm collet that has been modified to securely hold an 8mm collet. Whoever did it, it was very well done. I thought it was very cool ... moreand bought it like this years ago on here. I personally never used it in a lathe.
$
1400.00
Buy It Now
$139.15 Shipping
Condition: Used
Location: Watsontown, United States
This Hardinge Tail Stock for the HLV-H Precision Lathe is a great addition to any metalworking equipment collection. Crafted in the United States with ... moreprecision, this tail stock is perfect for CNC, metalworking, and manufacturing businesses. Featuring the reputable Hardinge brand, this tail stock is specifically designed for HLV-H Precision Lathes. The tail stock is used, but in great condition, making it a nice addition to any metalworking equipment. Get the most out of your precision lathe with this Hardinge Tail Stock.
$
29.00
Buy It Now
$8.50 Shipping
Condition: Used
Location: Coloma, United States
5c SQUARE COLLET HARDINGE 9/16".
$
8999.99
Buy It Now
Condition: Used
Location: Watertown, United States
One-Hardinge Lathe Model TFB-H Product Brochure in excellent condition considering it's age. 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e5b0c206c-0xf1-
$
395.00
Buy It Now
$83.31 Shipping
Condition: Used
Location: Sicklerville, United States
Hardinge DV-59 Complete Bed Turret. 5/8" Turret Holes & assorted Tools in Turret.
$
17999.99
Buy It Now
Condition: Used
Location: Watertown, United States
$
489.99
Buy It Now
Free Shipping
Condition: Used
Location: Covina, United States
These are Assorted Hardinge Chucker Lathe Threading Lead Screws & Followers. Made in the USA by Hardinge. Lead Screw Thread Sizes (14): 11 tpi, (2) 13 ... moretpi, 16 tpi, (2) 18 tpi, (2) 20 tpi, 24 tpi, (3) 28 tpi, 32 tpi, blank.
$
1950.00
Buy It Now
Condition: Used
Location: Stone Mountain, United States
For sale is one used Hardinge DV-59 second operation Turret Lathe. This lathe is in good running condition. s/n- V59 3964-3. Specifications: Swing- 9" ... moreBed Length- 28" Spindle speeds- 230- 3500 RPM Spindle nose- 5c collet Turret positions- 6 Weight- 1800 lbs. Main motor- 3/4HP- 220 volts. 3 phase, 60 cy. Equipped with: 5c Collet closer Standard cross slide Production cross slide(20) assorted Hardinge/Southbend 5c collets(2) No. 3A 1/8" to 5/8" cap. Jacobs drill chucks(1) No. 6A. 0 to 1/2" 4) dead centers(1) live center radius attachment Machine can be inspected under power. Sold as is. Will load free of charge on customers provided open top truck. Buyer responsible for freight charges. See terms. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal. Bank check, or company check. Must be made within 5 days after using the"Buy It Now" option on Ebay. If the item is not paid in full within. The 5 day period. The item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) Allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received in full. Texas residents will pay the applicable sales tax unless we(the seller) Are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within. The 30 day period by the buyer. We, the seller, will consider the unclaimed item forfeit by the buyer. And the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge. Unless otherwise noted in the item(auction) description herein. Crating/Boxing ch
$
27.50
Buy It Now
Free Shipping
Condition: Used
Location: Waterford, United States
USED, TOOL HOLDER.
$
850.00
Buy It Now
$42.00 Shipping
Condition: Seller refurbished
Location: Cedar, United States
$
199.99
Buy It Now
$12.00 Shipping
Condition: Used
Location: Whittier, United States
Made in the U.S.A. by Hardinge. This is a used Adjustable Slide Boring Tool Holder in good working condition. Shank: 5/8". Slide Travel: 1". Capacity: ... more5/8".
$
475.00
Buy It Now
$85.00 Shipping
Condition: Used
Location: Bristol, United States
hardinge dv-59 Turret lathe second operation Nice shape Loading fee is100.00 dollars prep for shipping 200.00 dollars winning bidder must arrange shipping ... moreemail me with date and time truck is coming Thanks for looking Posted with
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
USED HARDINGE EXPANSION COLLET 3/4" 993
YOU ARE BIDDING ON ONE USED HARDINGE EXPANSION COLLET 3/4" GOOD CONDITION Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge 5C 13/32" Collet Round Grip
Hardinge 5C 13/32" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box1 041330GB/JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e1583746e-0xf9-
22J HARDINGE 1-11/16" COLLET GREAT CONDITION FREE SHIPPING IN USA CNC LOT C109
SquareTrade © AP6.0 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A HARDINGE 1-11/16" DIA 22J COLLET THIS COLLET IS IN GREAT CONDITION WE ALSO HAVE OTHER HARDINGE 22 J COLLETS LISTED, OR WILL BE LISTING. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your favorites list! THREADS.
Lot of 5 pcs MSC, Hardinge, Royal 5C Square Lathe Collets 3/4 5/8 3/8 1/4 5/16 B
Up for Bid is a Lot of 5 pcs MSC. Hardinge and Royal Brand 5C Square Lathe Collets! They are in very nice condition. Here is a list of what is included: 3/4. 5/8, 3/8, 1/4 and 5/16 I will provide a 14-day money back guarantee. Please do not ask me to split up this lot. I want to sell them all together. Exactly how they are listed.
Hardinge 5C 7/16" Collet Round Grip
Hardinge 5C 7/16" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin247 Box1 041330GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
2 Hardinge Collet Pads S15 (1 1/32") & S10 (29/64")
Description 2 Hardinge Collet Pads S15(1 1/32" S10(29/64" Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star ... moreservice. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
USED HARDINGE 5C 2" EXTRA DEPTH EMERGENCY STEP CHUCK 2" X ..150 DEEP 271
YOU ARE BIDDING ON ONE USED MINT HARDINGE 5C EMERGENCY STEP CHUCK 2" FIRST BORE IS 2" X.150 DEEP SECOND BORE IS 1.870 X.440 DEEP EXCELLANT CONDITION CLOSER NOT REQUIRED Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge TT tap collet holder .194 Qty1
Hardinge TT tap collet holder.194 Qty1 No combined shipping and handling discount
COLLET #22 HARDINGE 1" ROUND FOR AUTOMATICS AND SCREW MACHINES #6518
DESCRIPTION: 22 COLLET HARDINGE 1" ROUND FOR AUTOMATICS AND SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received ... moreback in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, C
Hardinge 5C 19/32" Collet Round Grip
Hardinge 5C 19/32" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
LOT OF 2 ORIGINAL HARDINGE 52SC COLLETS 1/4" 5/16" LATHE MILLING MACHINIST TOOL
Lot of two(2) original Hardinge 52SC collets. Sizes are 1/4" and 5/16" Threads and keyway are in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
USED HARDINGE 5C EXTRA DEPTH EMERGENCY STEP CHUCK 2" 2.120 X 1.026 DEEP 705
YOU ARE BIDDING ON ONE USED HARDINGE 5C EXTRA DEPTH EMERGENCY STEP CHUCK 2" 2.120 X 1.026 DEEP EXCELLANT MACHINING COLLET CLOSER NOT REQUIRED Powered by The free listing tool. List your items fast and easy and manage your active items.
Hardinge Knurling Tool T8 5/8" DV-59 DSM59
Hardinge Knurling Tool T8 5/8" DV-59 DSM59 Good shape overall Blackoxide discolered in spots Thanks for looking No combined shipping and handling discount
Hardinge Sjogren 2J Speed Collet Chuck w/ L0 LO Mount Lathe Collet Chuck
Hardinge Sjogren Speed Collet Chuck 2J With L-0 Tapered Spindle Mount Excellent Condition Works Great
MINT HARDINGE 3" EXTRA DEPTH EMERGENCY STEP CHUCK 2.970 X .212 DEEP 270
YOU ARE BIDDING ON ONE MINT HARDINGE 3" EXTRA DEPTH EMERGENCY STEP CHUCK 2.970 X.212 DEEP CLOSER REQUIRED Powered by The free listing tool. List your items fast and easy and manage your active items.
HARDINGE SJOGREN 2J SPEED CHUCK D1-6 COLLET CHUCK for Monarch LeBlonde Lathe #b
This Sale is for ONE used HARDINGE SJOGREN USA SJOGREN 2J SPEED COLLET D1-6 COLLET CHUCK with one collet( the collet did not come with th echuck but i had one so I am including it. The collet has some rust on its top edge but is otherwise good.see pic. ITEM NO. b) This chuck has the usual nicks and dings from use but is ready for more.The black ring that turns also has some cracks and chips but this in no way affects use. Have a look. The outside wheel turns smoothly and tightens the collet properly. Could use an oiling and polishing otherwise ready to go.A very expensive tool. 2J collets will hold much larger work pieces than the usual 5c collet chucks. A scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my ... moreother sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors a
Hardinge R8 Round Smooth Collet 1/2, 5/16, 3/4, 3/16, 5/8
NUMBER OF Items 6(one of each) R8 Round Smooth Collet sizes 2 each of 1/2. 5/16, 3/4, 3/16 Only One 1/2 size collet has"Hardinge" Printed on it Up date 5/8 is now gone System of Measurement Inch Name which size you want Each New List Price: $40.00+ USD Picture above is a stock photo
Hardinge-Sjogren 2A D3 Speed Collet Chuck
Hardinge-Sjogren 2A D3 Speed Collet Chuck. D1-3 Mount. Sat on a shelf for years.
Hardinge 3J Collet RD 3/8, 5/8, 1-5/16, 1-3/4, 15/16
Listing is for one each Total items 5 ea Hardinge 3J Collet RD 3/8. 5/8, 1-5/16,15/16 Name which size you want. 1-3/4 now gone New List Price: $92.50 USD Above picture is stock photo
GEOMETRIC 3/16 EJ DIE HEAD W/5/8" SHANK ***XLNT***HARDINGE DV-59 DSM-59
GEOMETRIC 3/16 EJ DIE HEAD W/5/8" SHANK*XLNT*HARDINGE DV-59 DSM-59, GEOMETRIC"EJ" 3/16" DIE HEAD WITH 5/8" SHANK TENSION ONLY. EXCELLENT CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $10.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
HARDINGE/BROWN & SHARPE 5/64" ROUND #10Y EXTENDED NOSE COLLET
HARDINGE/BROWN& SHARPE 5/64" ROUND#10Y EXTENDED NOSE COLLET. F28129 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
HARDINGE #3 COLLETS, 4 PCS. TOTAL
HARDINGE#3 COLLETS. 4 PCS. TOTAL. 9/32" ROUND, 13/32" ROUND, GOOD CONDITION* 15/32" ROUND, 21/64" ROUND, FAIR CONDITION* C15107 This item is in FAIR TO GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
HARDINGE/BROWN & SHARPE #10 ROUND COLLETS, 9 PCS. TOTAL
HARDINGE/BROWN& SHARPE#10 ROUND COLLETS. 9 PCS. TOTAL, 1/16" 5/64" 9/64" 5/32" 3/16" 7/32" 5/16" 11/32" 13/32" B051020 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
5/16" GEOMETRIC DSA THREADING DIE HEAD W/CHASERS 5/8" ADJ SHANK HARDINGE
5/16" GEOMETRIC DSA THREADING DIE HEAD W/CHASERS 5/8" ADJ SHANK HARDINGE, GEOMETRIC 5/16" DIE HEAD. DSA MODEL WITH ADJUSTABLE SHANK TO COMPENSATE FOR ANY SPINDLE TO TURRET MISALIGNMENT. HEAD HAS NEW SPRINGS AND WORKS AS IT SHOULD. INCLUDES FOLLOWING CHASERS 0-80. 2-56, 3-56, 4-48, 4-40, 6-32, 8-32. IF THERE IS ANOTHER SIZE CHASER SET YOU NEED AND WE HAVE IT, WE WILL INCLUDE NO CHARGE. OTHERS ALSO AVAILABLE. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
3 Hardinge S26 Collet Pads S-26
Description 3 Hardinge S26 Collet Pads Sizes: 1 3/16" 1 3/16" 3" Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed ... moreto 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
24 MIXED HARDINGE OVERSIZE DAVENPORT FEED FINGER COLLET LOT
Inventory Number: 03130760044 Manufacturer: Description: 24 MIXED HARDINGE OVERSIZE DAVENPORT FEED FINGER COLLET LOT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 24 PIECE MIXED LOT AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may
40 MIXED HARDINGE OVERSIZE DAVENPORT FEED FINGER COLLET LOT
Inventory Number: 03130760045 Manufacturer: Description: 40 MIXED HARDINGE OVERSIZE DAVENPORT FEED FINGER COLLET LOT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 40 PIECE MIXED LOT AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may
Hardinge 5C 3/4" Collet Round Grip
Hardinge 5C 3/4" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against federal ... morelaws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Hardinge 5C 11/16" Collet Round Grip
Hardinge 5C 11/16" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB/JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Hardinge 5C 1/4" Collet Round Grip
Hardinge 5C 1/4" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box2 041330GB/JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against ... morefederal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Hardinge R8 Collet Set
Set of 6 Hardinge R-8 collets. Sizes 1/8" 3/8" Qty 2) 1/2" 9/16" and 5/8" All in very nice condition
Metric Collet Set - Mostly Hardinge
Set of 11 Metric R-8 collets. Hardinge brand: Sizes 4.5(Qty 2) 8 122, 14 and 16 MM SPI Brand- Made in Germany Sizes 8.10,20 MM Unmarked for brand or country of origin 18 MM- minor damage on nose All in very nice condition
10 HARDINGE 5C EMERGENCY COLLETS - E & E2
aims 10 HARDINGE 5C EMERGENCY COLLETS- E& E2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by Hardinge These are 10 Hardinge 5C Emergency Collets in good condition. Specifications: Collet Type: 5C Emergency. Sizes: E& E2. OAL: 3-3/8" Approx) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 HARDINGE 5C EMERGENCY COLLETS- E& E2 Reliable Tool Inc. c 2011 | Powered by
7 HARDINGE 5C EMERGENCY COLLETS - EN2 & EN1
aims 7 HARDINGE 5C EMERGENCY COLLETS- EN2& EN1 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by Hardinge These are 7 Hardinge 5C Emergency Collets in good condition. Specifications: Collet Type: 5C Emergency. Sizes: EN1& EN2. OAL: 3-3/4" to 4-1/4" Approx) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 7 HARDINGE 5C EMERGENCY COLLETS- EN2& EN1 Reliable Tool Inc. c 2011 | Powered by
Hardinge 6" 3-Jaw Power Chuck w/Hard Jaws , cnc lathe, mill, miyano
1pc- 6" Hardinge Sure-Grip 3-Jaw Power Chuck with an A2-5 Spindle Nose(Serrations are 1/16" x 90 Deg. Model#C-306 Serial#AK1094 1 Set- 3 Serrated Hard Jaws. One jaw has been cut down. See photos for clarification 1 Set- 3 spindle mount bolts. not shown in photos. Condition is used. There are some scracthes and gouges on the face of the chuck, see photos for clarification. however the chuck functions perfectly. The drawbar pulls very smoothly. Retail on a similar hardinge chuck on shophardinge.com is $5340, the hard jaws are around $300 new.
POWERHOLD 6" 3-Jaw Power Chuck w/Hard Jaws , cnc lathe, mill, miyano, hardinge
1pc- 6" Powerhold 3-Jaw Power Chuck with an A2-5 Spindle Nose(Serrations are 1/16" x 90 Deg. Model#6.5H-3-A5FS 1 Set- 3 Serrated Hard Jaws 1 Set- 3 Jaw t nuts 1 Set- 3 spindle mount bolts. not shown in photos. Condition is used. There are some scracthes and gouges on the face of the chuck, see photos for clarification. however the chuck functions perfectly. The drawbar pulls very smoothly. Retail on this chuck is over $4000, the hard jaws are around $300 new.
Hardinge TT-5/8 Tapping Head Nice Old Machinist Tool
Gently used Hardinge TT5/8 tapping head. This has a 5/8 staight shank. It comes with a.141 collet. Nice tool.
1/2" HARDINGE HDC-10 TOOL HOLDER REDUCER BUSHING 1-1/4" OD
HARDINGE HDC-10 REDUCER BUSHING 1-1/4" O.D. SIZE: 1/2" Used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
STAR SINE COLLET CHUCK INDEXER W/HARDINGE 3AT COLLETS ***SUPERB***HARIG GRINDALL
STAR SINE COLLET CHUCK INDEXER W/HARDINGE 3AT COLLETS*SUPERB*HARIG GRINDALL, STAR COLLET SINE CHUCK INDEXER. 12 DIVISION INDEX, DEGREES, MINUETS AND SECONDS ON VERNIER, HARDINGE 3AT COLLETS 1/16-1/2 EXCEPT 5/16" SUPERB CONDITION AS SHOWN, SMOOTH OPERATION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Calculated US Shipping Enter ZIP Code and click button to see prices: UPS Ground Other Shipping Options $0.00 USPS First-Class Mail® Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
HARDINGE TOOL ROOM LATHE MAINTANANCE MANUAL, MODEL HLV-H
This is for a maintanence manual for a Hardinge tool room lathe. Model HLV-H. 52 pages in excellent condition. It is an original manual, not a copy. Free media mail shipping to all 48 continental US states. Thanks for looking and check out my other Ebay auctions!
CNC Turning Center Gang Style 4" chuck Hardinge Quest GT27SP (2003)
4" chuck Hardinge Quest GT27SP Gang Style CNC Turning Center(2003) Specifications Bar Size: 1.062" 27mm) Chuck Size: 4" 100mm) Spindle Speed: 8.000 RPM, X-Axis Travel: 11.96" 304mm) Z-Axis Travel: 11.062" 281mm) C Axis: 360.000, Tool Shank: 0.500" Square/Rotary) Tool Shank: 0.750" Round) Main Motor Drive: 5 HP, Equipped With: Fanuc 21iT CNC Control. C Axis Contour Milling, 16C Collet Chuck, 000010"00010mm Resolution Control, Custom Macro B, Rigid Tapping. Run Time Parts Counter, Headwall Coolant, SP Certification, Laser Ball Bar Tested Dynamic Balanced Spindle and Drive Motor, Harcrete Polymer Composite Base, Full Machine Documentation, Part Chute, 1) Extra Top Plate with Holders, M Function Air Blasts@ Bulkhead and Cross slide, Machine being sold As Is. Where Is. Buyer is responsible for shipping and ... moreloading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
HARDINGE CHNC TURRET TOP PLATE
This is a replaceable turret top plate for a Hardinge CHNC CNC lathe. It is is 8" across the flats. It is in good condition except for the one station in the second picture. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.95. Use the shipping calculator for all international addresses. If you purchase any of my other listings. I will combine shipping on any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping, commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win the auction for multiple items. Ask for an invoice rather than pay right away. I will adjust the shipping charges and send out an invoice. See my listings for: Sunnen ... morehone tooling; Hardinge lathe parts& tooling; other machine shop tooling; marine& outboard motor parts and manuals; Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s. Mad Magazines and paperback books from the 60’s&b 70’s and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
HARDINGE HLV-H PRECISION TOOLROOM LATHE
HARDINGE HLV-H SUPER PRECISION TOOLROOM LATHE S/N HLV-H-7213S BUILT 1978 SPECIFICATIONS: SWING OVER BED 11 in. SWING OVER CROSS SLIDE 6 in. DISTANCE BETWEEN CENTERS 18 in. SPINDLE 5C/ 4 º TAPER NOSE SPEEDS 125- 3000 VARIABLE TAILSTOCK 2 MT THREADING(27) INCH WEIGHT 1700 lbs. ELECTRICS 440/ 3/ 60 PRICE INCLUDES: NEWALL C-80 2-AXIS DRO· COOLANT SYSTEM· ALORIS BXA QUICK-CHANGE TOOLPOST& 5) HOLDERS· BUCK ZERO SET 6-in. 3-JAW CHUCK– OD JAWS ONLY· REAR SPLASHGUARD· ONE SHOT LUBRICATION TO WAYS· APPROX(64) 5C COLLETS– IMPORTED· DRILL CHUCK– ALBRECHT KEYLESS· LIVE CENTER- SKODA NEW SPINDLE REBUILD PRICE: $14.990 TERMS: DUE IN FULL PRIOR TO SHIPMENT F.O.B. FREMONT. CA(PREP& LOADING INCLUDED) NOTE: Machine was originally set up for 575 VOLTS. This machine has a trasnformer on it to run at 440V. If ... moreyou need 208-220. You need to buy an additional transformer. We recommend buying a new transformer that will run from 575V down to 208. You would just take off the one that brings the machine to 440V. Call with any questions. Call or email us with any questions. The machine can be seen under power in our Fremont. CA showroom. We can help with trucking quotes if need be. Thank you for viewing our listing. We have few other machines in our ebay store and more on our website: Sincerely, PERFORMANCE MACHINE TOOLS. P.510.249.1000. Email:
HARDINGE TOOLPOST BORING BAR HOLDER L5
FREE USA SHIPPING! Hardinge Boring Bar Holder 5/8" Model L5 NICE! FREE USA SHIPPING!
(2) Hardinge CC-14 2" Extension Toolholders for CHNC I,II,III's
You are bidding on(2) Used Hardinge CC-14 2" Extension Tool Holders. They are in good condition. Please email your questions. Dms1103@gmail.com I will combine shipping with my other auctions whenever possible.
Hardinge CC-33-3/4 Triple Toolholder for CHNC I,II,III's
You are bidding on(1) Used Hardinge CC-33-3/4 Triple Toolholder. It is in good condition. Please email your questions. Dms1103@gmail.com I will combine shipping with my other auctions whenever possible.
HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R
HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER- HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER INVENTORY# 4343 MODEL: CC-25R SPECIFICATIONS PART: PL 001 1625 R TOOLING CAPACITY: 1/2" RIGHT HAND SQUARE SHANK TOOL BITS DESCRIPTION THE EXTENSION HOLDER IS USED TO HELP BALANCE THE TOOL LENGTH IN A TURRET SETUP AND GIVE ADDITIONAL SUPPORT FOR 1/2" RIGHT-HAND SQUARE SHANK TOOL BITS THAT OVERHANG THE TURRET. IT CAN BE USED FOR FACING TURNING. BORING, CHAMFERING, OR THREADING OPERATIONS. KNOWN HARDINGE USAGES: CHNC/HNC GOOD CONDITION FOB OUR FLOOR CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION ... moreTO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be
(1) Hardinge CS-23 CNC Toolholder
You are bidding on(1) Used Hardinge CS-23 CNC Tool Holder. It is in very good condition. Please email your questions. I will combine shipping with my other auctions whenever possible. dms1103@gmail.com
(1) Hardinge CS-32 CNC Toolholder
You are bidding on(1) Used Hardinge CS-32 CNC Tool Holder. It is in very good condition. Please email your questions. I will combine shipping with my other auctions whenever possible. dms1103@gmail.com
Hardinge Conquest Live Tool Holder CL54 collet chuck 180 T51 T51SP T65 axial CNC
Hardinge CL-54 End-Working Live/Revolving Tool Holder in great shape and spins freely. Often used on a Hardinge Conquest T51/T51SP or a T65 and others. Accepts a 180 Series double-angle collet(example: SG-180& SB-180 and others) Equipped with an end-cap to protect gear. 3000 RPM; 2.4 HP I have other Hardinge live tool holders[and static] available as well. If you have any questions please cal us a 262-895-3462 or email us at sales@mwmachinery.com Thanks for looking and be sure to visit our Ebay store for all of your metalworking solutions. Bid With Confidence! Check out my other Auctions by clicking View seller's other items l ink above. Or visit my e B a y Store! Our Web Site is displayed within our About m e Page above in the" Seller info" area above.
Hardinge Tooling: Aloris Tool Post & Tool Clamp
Aloris Tool Post and( 2)Tool Holders AXA1. Condition is excellent. Very little use.
8 pc Hardinge SB-2 Toolholder Bushings Sleeves
Used Hardinge SB-2 toolholder bushings. 2 pcs) 5/8, 2 pcs) 3/4, 2 pcs) 1, 2 pcs) 1 1/8. All show signs of use, some more then others. NOTE: ALL MACHINERY/MERCHANDISE IS SOLD AS IS. WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL. IF BUYER RESIDES IN PA 6% SALES TAX IS CHARGED UNLESS TAX EXEMPT. ALL OUT-OF-STATE BUYERS PICKLING UP ITEM(S) MUST PAY PA SALES TAX(STATE LAW) International shipping is available for some areas. Please contact us for shipping cost. Import duties. Taxes, etc. are the responsibility of the buyer. ITEM LOCATION: VALLEY VIEW. PA 17983(SCHUYLKILL COUNTY)
Hardinge 3.5" Dovetail Cross Slide
Hardinge 3.5" dovetail slide. I also have a Hardinge lathe listed that this could go with. Slide is in great working condition.
Hardinge Operator's Manual for Model DV59 High Speed Lathe
One-Hardinge Operator's Manual for Model DV59 High Speed Lathe. Kinda Dirty and a little Oily but still completely ledgible. Check the pictures.
Hardinge chucker lead screws, with follower nuts for threading attachment
New Hardinge chucker lead screw. With follower nut. Several lead pitch available, 8 TPI to 64 TPI) Inquire.
Hardinge 5V collets. 3 collets.
These are three Hardinge 5V collets. 7/32. 1/2, 3/8 inch.
30 HARDINGE DAVENPORT BURR COLLET LOT, ROUND,HEX,SQUARE, 3/32 THRU 7/8"
Inventory Number: 03130760072 Manufacturer: Description: 30 HARDINGE DAVENPORT BURR COLLET LOT. ROUND,HEX,SQUARE, 3/32 THRU 7/8" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 30 PIECE MIXED LOT, AS SHOWN, SEE PICTURES, NOT A SET, SOME MISSING DUPLICATES OF OTHERS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these it
30 HARDINGE DAVENPORT BURR COLLET LOT, ROUND,HEX,SQUARE, 5/64 THRU 3/4"
Inventory Number: 03130760071 Manufacturer: Description: 30 HARDINGE DAVENPORT BURR COLLET LOT. ROUND,HEX,SQUARE, 5/64 THRU 3/4" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 30 PIECE MIXED LOT, AS SHOWN, SEE PICTURES, NOT A SET, SOME MISSING DUPLICATES OF OTHERS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these it
118 HARDINGE OVERSIZE DAVENPORT, O.S. DAV, COLLET FEED FINGERS, 1/4-13/16
Inventory Number: 03130760070 Manufacturer: Description: 118 HARDINGE OVERSIZE DAVENPORT. O.S. DAV, COLLET FEED FINGERS, 1/4-13/16 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 118 PIECE MIXED LOT, AS SHOWN, SEE PICTURES, NOT A SET, SOME MISSING DUPLICATES OF OTHERS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these i
NORTHFIELD 4" PRECISION AIR CHUCK FOR HARDINGE
NORTHFIELD 4" PRECISION AIR CHUCK FOR HARDINGE SERIAL NO. 454925 THE JAWS THAT COME WITH THIS CHUCK ARE ALUMINUM AND HAVE BEEN MACHINED TO 1.500" DIAMETER X 1-3/4" DP. THE OVERALL LENGTH OF THE JAWS IS 3"
ATLAS CLAUSING LATHE 19 PC COLLET SET HARDINGE NEAL SKOKIE 5C SO.BEND 5 DAYS!
UP FOR BIDS IS A 19pc MIXED LATHE COLLET SET. VARIOUS MANUFACTURERS: SOUTH BEND. HARDINGE, NEAL SKOKIE, BUCK& SOME ONLY LABELED"5C" THE COLLET HOLDER IS NOT INCLUDED IN THIS AUCTION! THE LI ST IS AS FOLLOWS: SOUTH BEND-7/8. 7/16, 3/8, 11/16 BUCK-1 1/16 HARDINGE-9/32. 3/8, 5/16, 1/2, 7/8, 5/32 NEAL SKOKIE-9/16. 1/8 5C-1" 1/2 HEX, 1/16, 1/4, 3/4, 1/4 CALIFORNIA BIDDERS MUST PAY SALES TAX.
LOT OF OVER 45 HARDINGE COLLETS NO 1 WARNER & SWASSEY W & O
Theres 19 brand new in the box and 26 used collets all made by HARDINGE.Various sizes and styles.These are all W&S NO 1 SIZE. Free shipping USA overseas 30.00 flat rate. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
LOT OF OVER 75 HARDINGE COLLETS BARDONS & OLIVER B & O NEW USED
Theres 36 brand new in the box and 42 used collets all made by HARDINGE.Good stuff.Large assortment of sizes and types including round and square collets.Fractional and metric sizes the used collets I am not sure were ever used but i am calling them used since they arent in the original package.For the Bardons and Oliver lathes and machines. Free shipping USA overseas 30.00 flat rate. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
LOT OF OVER 60 BROWN SHARPE AND HARDINGE COLLETS NO 10 SPRING & STUB COLLETS
THESE ARE ALL NO 10. IM CALLING THE 13 NOT IN THE ORIGINAL PACKAGE USED BUT THEY LOOK BRAND NEW ALSO.VARIOUS STYLES AND SIZES MOST NEW IN THE BOX.THERES LSO 6 STUB COLLETS.SUPER DEAL IF YOU CAN USE THESE.Free shipping USA overseas 30.00 flat rate. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
Hardinge Lathe Micro100 Carbide Part Off Groove 3/8 x .093 x 1/4 Dp.Mill
Hardinge Carbide Lathe Bit RH 3/8" Part Off. Groove. Etc.0935 x 1/4" Near New Mill Oal 3 1/8" Sharpened.SPI 80-586-1" Micro100 Carb. Lg.7/8" Can be Sharpened Many Times BID WITH CONFIDENCE PLS. ASK? Before Bidding LAMAR ATKINSON 408 243 0726 6Days WE SHIP FAST PLEASE== SERIOUS BIDDERS ONLY PLS. ADD ME TO YOUR FAVORITES LIST S/H $
Hardinge Cobra 42---Price Just Reduced
We are selling this 1998 Hardinge Cobra 42 CNC Lathe. It has Fanuc 21-T 32 Bit CNC Control w/ CRT. Extended Part Program Editing, 160M Part Program Storage, Multi-Repetitive Canned Cycles, Manual Pulse Generator Handwheel, Automatic Lubrication System, Coolant System, Turret, and Tailstock. The machine is in good condition. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions. Machine is being sold as is. Where is.
QUICK ACTING DRILLING TAILSTOCK FOR A HARDINGE DV-59, EXCELENT CONDITION,4" TRAV
THIS IS A LEVER TAILSTOCK FOR FRILLING ON A HARDINGE DV-59 IN REAL GOOD CONDITION. I DO HAVE STANDARD& 6 POSITION TURRET TAIL STOCKS AND OTHER HARDINGE ATTACHMENTS AND TOOLING,SEE MY OTHER LISTING FOR HARDINGE SPEED LATHES,HLV-H TOOLROOM LATHE AND DV-59 APPROXIMATE SHIPPING WEIGHT:`33 LBS. 14 X 8 X 12 WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the ... moreitem and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Dec-22-11 at 09:55:08 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Hardinge AHC-21
Up for sale is a Hardinge AHC-21 bar holder with hold down bolt. 5/8" bar hole. Sorry. I can only ship to lower 48. USA
Hardinge Model DSM59, Second Operations Lathe Machine, Parts List Manual
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Industrial Machinery Manuals Is Proud To Offer 1 Digitally Enhanced Quality Bound Copy Of A: Hardinge Model DSM59 Second Operation Lathe Machine. Parts List Manual This Manual Covers Models: DSM59 This Manual Includes: I.M. Inventory# H-105SB Parts List Functional Illustrated Diagrams Showing Component Identification This Manual Has 14 Printed Pages. We Ship Domestically via USPS First Class or Priority Mail ABSOLUTELY FREE! Delivery Time Usually 1-5 Days. If You Need a Product Faster. Please View The Shipping Calculator Below For Options. Other Options: UPS Overnight Next Day Air. UPS 2 nd Day Air. All Thing
HARDINGE 32 PITCH STEEL LEAD SCREW U
WELCOME TO THE IAR Discount Industrial Equipment& Supplies, | | | | | Product Categories, Shop Pages, | | | | | | | PRODUCT DESCRIPTION, IAR Stock# 2998 Condition Used-Excellent. Qty of Lots 3 Items In Lot 1. Location 1620. HARDINGE 32 PITCH STEEL LEAD SCREW U Make: HARDINGE. Model: 32 PITCH. SPECIFICATIONS- See Tech Spec tab for more details. Size: 2in. Width: 1.90-2.40in. Type: Screw. Weight(Lbs) 2. Shipping dimensions(L in) 2.5(W in) 2.5(H in) 2.5. Calculated Shipping Tech Spec HARDINGE 32 PITCH STEEL LEAD SCREW. Compliance Comming Soon. HARDINGE 32 PITCH STEEL LEAD SCREW U.
1997 Hardinge Cobra 42 w/ Fanuc 21-T control, 16C collet nose & tailstock
1997 Hardinge Cobra 42 w/ Fanuc 21-T control. 16C collet nose& tailstock, Click to View Image Album Click to View Image Album Click to View Image Album Good used Hardinge lathe still installed in the original owner's shop so you are welcome to test operate it. Complete w/ 16C collet nose. Tailstock. Always run on oil coolant. This machine and the others from this shop were run by intermitently on a single 40 hour shift. Low run time and excellent condition. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then ... morecounter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay
Set Of 2 Hardinge Lathe Ball Bearing Centers With One Tool Holder
Set if two hardinge lathe ball bearing centers and one hardinge lathe tool holder. I say used but barely used. Maybe a few times. The big one is almost 7 inches long with a three inch next. The small one is 6 inches long with a 1 1/2 inch neck. I don't see and mfg number but every item in this auction says Hardinge. Big ball bearing center in original box. Retail on this is way over asking price. Please check our feedback on Machinest items as everybody loves our prices. Posted with
COLLET #22 FEED FINGER BAR STOCK PULLER 5/8 X 1 RECTANGLE HOLDING HARDINGE #5605
SOUTHEASTERN TOOLING IS PROUD TO OFFER FOR YOUR CONSIDERATION: BAR STOCK PULLER FEED FINGER COLLET#22 RECTANGLE HOLDING HARDINGE 5/8" X 1" BACK BEARING DIAMETER 1.300" OVERALL LENGTH 6.000" THREAD 1.185"20LH USED BUT APPEARS TO BE IN GREAT SHAPE Inventory Item#5605 Please browse our store and other listings if you have any questions feel free send me a message.New items arriving daily; so if you don't see what you want. Check back. WE GLADLY COMBINE SHIP; Except Auction Items. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. Please wait for an invoice prior to making a payment. We try to describe every item the best that we can. Although we do have experience in the tooling industry ... morewe don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping on everything; Except Auction Items. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangemen
JACOBS BALL BEARING CHUCK NO. 32 CAPACITY 0-3/8" & CHUCK KEY for Hardinge DV-59
Up for bid is a machinist’s Jacobs Chuck No. 32 with a capacity of 0" to 3/8" with a key in very good condition. 5/8" Shank. Made in USA. Ebay message me if you have any questions. Thanks for looking!
Hardinge Sjogren Lathe Speed Chuck D1-3 D3 Spindle + 2J Collet Set
This is a Hardinge Sjogren lathe collet speed chuck for a D1-3 camlock spindle. Plus a set of 21 Hardinge 2J collets from 1/8" to 1-3/8" by sixteenths. Good used working condition. Buyer pays actual shipping only for a package approximately 10"x10"x12" and 32 lbs. No additional packing or handling charges. I can sell and ship only within the US.
Hardinge 4c collets
Used set of Hardinge 4c collets. Sizes are 1/8. 11/64, 1/4(3) 5/16(3) 3/8, 7/16, 1/2, 5/8. One of the 1/4's and 5/16's and the 5/8 is not Hardinge. 12 collets in all. This auction is for the lot of 12.
HARDINGE MODEL E DOUBLE ACTING CROSS SLIDE WITH RISER & D6 HOLDER
HARDINGE CROSS SLIDE MODEL E RISER& D6 MULTIPLE TOOL HOLDER INCLUDED Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking!
5C COLLET HOLDER HORIZONTAL MANUAL MILLING FIXTURE - HARDINGE YUASA ETC.
This is a used horizontal/vertical 5C Collet holder. There is no damage that I can see and it actually looks barely used. It was made in Taiwan and looks like good quality. I'm including one 5C collet. Please see the pictures for more information. Priced cheap, get it while you can! FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS ... moreand UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
LATHE 1/2" TOOL BITS LOGAN SOUTH BEND ATLAS CLAUSING HARDINGE ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Neatro Packaging In Box Condition Excellent Quantity 12 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
HARDINGE H-4 5C COLLET INDEXER HORIZONTAL MANUAL MILLING FIXTURE
This is a used vintage HARDINGE H-4 5C Collet holder/ indexer. There is no significant damage that I can see that would effect performance but I cant get the indexer part to rotate for some reason. I think it just needs lubing because otherwise it all looks good, the collet screws in ok(one 1" hardinge collet is included) I don't have time to play with it so I'm offering it for quick sale. Please see the pictures for more information. FREE PRIORITY MAIL SHIPPING INCLUDED! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY ... moreSHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, C
KDK TOOLS #KDK-119 QUICK CHANGE 5C COLLET BAR / HOLDER + 3/4" HARDINGE COLLET
Search Titles and Descriptions Categories Policies Gallery KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET We also have a KDK-105 Master Bar for Boring Bars on Auction! Please Check Our Store. Specifications Allows instant change to threading. Internal grooving, drilling! Quick change from center drilling to tapping. Assures the simplicity of KDK Preset Quick Change Tools to all 5C collet jobs! Includes Collet: 3/4" Item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
Hardinge Straight and Taper Turning Slide: Model E
Not 100% sure about what this fits. But I have been told it fits. Hardinge HLV/TFB/DV59 lathes.
COLLET #10 HARDINGE 7/16 ROUND FOR AUTOMATICS AND SCREW MACHINES #6709
DESCRIPTION: 10 COLLET HARDINGE 7/16" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
COLLET #10 HARDINGE 5/16" ROUND FOR AUTOMATICS AND SCREW MACHINES #6688
DESCRIPTION: 10 COLLET HARDINGE 5/16" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
Vintage 5/8" Hardinge 1J Collet Very Nice!
Here is a Vintage 5/8" Hardinge lathe 1J Collet in great condition. I answer all questions. Good Luck!
Vintage 1/4" Hardinge 1J Collet Very Nice!
Here is a Vintage 1/4" Hardinge lathe 1J Collet in great condition. I answer all questions. Good Luck!
Vintage 3/8" Hardinge 5C Collet Very Nice!
Here is a Vintage 3/8" Hardinge lathe 5C Collet in great condition. I answer all questions. Good Luck! 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e541446a6-0xf8-
COLLET #10 HARDINGE 7/32" ROUND FOR AUTOMATICS AND SCREW MACHINES #6687
DESCRIPTION: 10 COLLET HARDINGE 7/32" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
COLLET #10 HARDINGE 25/64" ROUND FOR AUTOMATICS AND SCREW MACHINES #6691
DESCRIPTION: 10 COLLET HARDINGE 25/64 ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo C
Collets and step collets 11 Pcs Hardinge and other mfgrs
Up for bid are these Collets and step collets 11 Pcs Hardinge and other mfgrs.
COLLET #10 HARDINGE 1/4" ROUND FOR AUTOMATICS AND SCREW MACHINES #6683
DESCRIPTION: 10 COLLET HARDINGE 1/4" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
COLLET #10 HARDINGE 1/8" ROUND FOR AUTOMATICS AND SCREW MACHINES #6685
DESCRIPTION: 10 COLLET HARDINGE 1/8" ROUND FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GREAT SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
USED 59/64 HARDINGE 5C COLLET WITH INTERNAL THREADS
SquareTrade © AP6.0 USED 59/64 HARDINGE 5C COLLET WITH INTERNAL THREADS PLEASE SEE OUR OTHER LISTING FOR MORE 4C COLLETS. See other items in our e-Bay store. WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G ... moreMachinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 45 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Apr-26-13 at 21:30:05 PDT. Seller added the following information: