In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
66.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
5C Emergency Steel Collet 1/16" Made of high grade tool steel and precision ground Often used to hold irregular shaped work pieces 1/16" pilot hole- can ... morebe drilled, machined, or bored. Three dowel pins are supplied for accurate machining. External thread is 1.24"-20RH internal thread is 1.041"-24RH 5C Emergency Brass Collet 1/16" Often used to hold irregular shaped work pieces 1/16" pilot hole- can be drilled, machined, or bored. Three dowel pins are supplied for accurate machining. Can be drilled, bored or machined with a high speed steel tool bit. Internal and external threaded.
$
2375.00
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
$
55.99
Buy It Now
$13.99 Shipping
Condition: Used
Location: Middlebury, United States
To get a freight quote we will need to know the following Prefer to pick it up yourself?. implied or. Unless otherwise specifically agreed to in writing ... moreby. LOCAL PICK-UP. Weight (lbs, oz): 2. Will there be a dock or forklift.
$
400.00
Buy It Now
Condition: Used
Location: Wichita, United States
LATHE COLLET JAWS ASSORTED SIZES. AtHall Industrial Services we work hard to keep the reputation of quality and integrity we've built over the years. ... moreCOMPUTER DRIVES AND MODULES. AND MUCH MUCH MORE. ELECTRIC MOTORS - SERVO MOTORS.
$
60.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Newhall, United States
Here is good used HARDINGE AHC-15 TOOL HOLDER.
$
55.00
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Wilkes Barre, United States
THIS HAS SURFACE RUST ON THE INSIDE AND WILL NEED TO BE CLEANED BEFORE USE OR USE FOR DISPLAY. SOLD AS IS AS PICTURED MAY NEED SERVICE PARTS OR REPAIR ... moreIN THE FUTURE. SOLD AS IS AS PICTURED.
$
42.90
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
224.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
299.99
Buy It Now
$44.90 Shipping
Condition: Used
Location: Middlebury, United States
Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the following Warehouse Location: L4213. ... moreNeed it urgently?. Call us and we will do what we can to get it to you quickly.
$
34.95
Buy It Now
$8.70 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe it’s a DV59. ( depends on your device ). (Preferred & cheapest).
$
15.28
Buy It Now
Free Shipping
Condition: New
Location: China
It is one of the best choices for you.Are you looking for a professional, yet affordable threaded collet stop set?. Are you in search of a sturdy, trustworthy ... moretool that can do multiple jobs at once?. If yes, look no further!
$
84.00
Buy It Now
$9.90 Shipping
Condition: Used
Location: Hanover, United States
Hardinge TK 5/8 Tool Holder 5/8" Shank. Used in good condition.
$
26.00
Buy It Now
Free Shipping
Condition: Used
Location: Osseo, United States
5C Custom Lathe Collet D-Shape 1/2" x 1/8". 5C Collets. Stamped: 1/8" 5C. Like New Condition. Custom Shape Precision Ground, Manufacturer Unknown. Model ... more# : D-Shape Custom. More Information SKU# SB-102128.
$
99.99
Buy It Now
$11.00 Shipping
Condition: Used
Location: San Diego, United States
HARDINGE WEDGE TYPE TOOLBIT HOLDERS LOT OF 2. MODEL#D-9 USES 3/8" SQUARE TOOL BITS USE FOR TURNING. CHAMFERING, FACING AND GROOVING ON HARDINGE LATHES ... moreHLV-H, TFB, DSM, VBS, DV MODEL MACHINES BOTH HAVE TOOL WEDGES COMES AS SHOWN EXCELLENT CONDITION $7.00 S&H
$
314.99
Buy It Now
$9.95 Shipping
Condition: New
Location: Dayton, United States
Condition: New. YOU ARE PURCHASING THE PICTURED. / LABELING PRODUCT SPECIFICATIONS AND / OR LABELING.
$
188.99
Buy It Now
Free Shipping
Condition: Used
Location: Dayton, United States
SPECIAL B62C. Manufacturer: HARDINGE. YOU ARE PURCHASING THE PICTURED. / LABELING.
$
25.00
Buy It Now
$5.00 Shipping
Condition: New – Open box
Location: Fairfield, United States
SERIES: S20.
$
150.00
Buy It Now
$18.60 Shipping
Condition: Used
Location: Baldwin, United States
This rack comes from a good lathe in excellent condition
$
239.00
Buy It Now
Free Shipping
Condition: New
Location: China
Increase stability with tool block, improve feed speed and cutting amount. Material: QT500 CAST IRON(Compact and dense, High strength, Creep resistance).
$
649.99
Buy It Now
$67.73 Shipping
Condition: Used
Location: Covina, United States
Fits DSM-59, DV-59, HSL-59 Lathes. Made in the USA by Hardinge Bros Inc. Slide Travel: 3-1/2".
$
59.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Plainville, United States
Hardinge Tool Holder T5 5/8 (missing One Set Screw).
$
300.00
Buy It Now
$40.00 Shipping
Condition: Used
Location: Charlottesville, United States
Parts/Repair: The slot alignment pin has been replaced by a ground down socket head cap screw. It works fine. But requires some analysis to get the ram ... moreback in once it comes out(the screw has a blade, rather than just a pin) The clamping screw is missing. The crank shaft bushings could stand some tightening to reduce backlash. But it's completely usable. Other than that. It seems to work fine. Turns smoothly. Measurement: see pic 2. It measures about 4.7" sitting on a flat surface. But in use it sits a bit lower on a bed. Seems to be shorter than what is needed for 9" I don't know which lathe this fits. Although it appears to be one of the early Hardinge family of brands. Split bed: Reverse dovetail. With a clamping slot down the center. MT1 hole. Weighs over 15 lb. Consistent with the expected quality. That does mean though that it has to ship in a medium FRB. Sorry: we cannot ship internationally.
$
90.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Unionville, United States
HARDINGE 5/8" SHANK T4 ADJUSTABLE TURNING TOOL HOLDER DV-59 DSM-59*XLNT* HARDINGE T4 ADJUSTABLE TURNING TOOL HOLDER 5/8" SHANK. EXCELLENT CONDITION. ... morePLEASE CHECK OUR OTHER AUCTIONS FOR MORE TURRET TOOLING AND HARDINGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $10.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
$
15.00
Buy It Now
$5.45 Shipping
Condition: Used
Location: Philadelphia, United States
Original RSB Royal South Bend 3/16" 3 3C collet for use with a South Bend 9" lathe. Threads and keyway are in fine order. All as shown. Always ... morecombine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-14047bad30f-0xf5-
$
20.00
Buy It Now
$8.85 Shipping
Condition: Used
Location: Baldwin, United States
BROWN& SHARPE 3/8" SQUARE#22 COLLET. 12201303 This item is in FAIR CONDITION. NOTE: PRODUCT MAY NOT MATCH PHOTO EXACTLY. BUT GUARANTEED TO BE ... moreIN COMPARABLE OR BETTER CONDITION. REGARDING SHIPPING: PLEASE REQUEST COMBINED SHIPPING WHEN PURCHASING MULTIPLE ITEMS FROM OUR STORE. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14356cef4f1-0xeb-
$
28.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
100.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Bennington, United States
Hardinge TL,Hardinge T10 sliding gear assembly. This goes on the rear of the spindle. Assuming if you need it you probably know what it is
$
14.24
Buy It Now
$6.05 Shipping
Condition: Used
Location: Warwick, United States
Original Hardinge B& W 3/16" 3C collet for use with a South Bend 9" lathe. Threads and keyway are in fine order. All as shown. Always combine ... moreshipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14523e150d4-0x107-
$
40.00
Buy It Now
$15.70 Shipping
Condition: Used
Location: Scarsdale, United States
This Hardinge Warner Swasey 1-1/8" Square Collet Pad 471 1003 is a great addition to your workholding equipment. The precision-engineered collet pads ... moreare designed to fit seamlessly with your Hardinge lathe, providing a secure grip on your workpiece. Made in the United States, this collet pad is of top-notch quality.The collet pad is tailored for use with a range of tools, including the Warner Swasey 1-1/8" model. It is perfect for businesses in the CNC, Metalworking & Manufacturing industry looking for a reliable workholding solution. With its excellent gripping capability, it is an essential tool for machining operations.
$
299.00
Buy It Now
Free Shipping
Condition: New
Location: China
Increase stability with tool block, improve feed speed and cutting amount. Material: QT500 CAST IRON(Compact and dense, High strength, Creep resistance).
$
84.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
350.00
Buy It Now
$105.05 Shipping
Condition: Used
Location: Columbia Station, United States
In very good condition this cross slide is smooth as butter. The dove tail is super tight with the gib being in good condition. If you want any more pictures ... moreor have any questions please reach out to me.
$
150.00
Buy It Now
Free Shipping
Condition: Used
Location: Pickerington, United States
HARDINGE DRIVE SUPPORT FOR HLV-H, TFB, DSM-59, DV-59 & HC MACHINES. Condition is Used. Shipped with USPS
$
109.99
Buy It Now
$7.55 Shipping
Condition: Used
Location: Berlin, United States
AS SHOWN
$
84.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
21.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
324.99
Buy It Now
Free Shipping
Condition: Used
Location: Covina, United States
aims HARDINGE TT-5/8 RELEASING TAP HOLDER w/ 5/8" SHANK + COLLET read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 ... morePM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Hardinge Bros. This is a Hardinge Collet Type Releasing Tap Holder in good condition. Model# TT-5/8 Features: The tap holder mounts directly into a round shank tool holder. TT" style tap holder collets are used to accurately hold and center taps. To provide a positive drive for the taps. The collet-type releasing tap holder is used to provide thread length control on either right orleft-hand taps by switching a lever inside the body of the tap holder. This Genuine Hardinge Tool Holders will fit the 5/8" holes in Second Operation Lathe or DSMA Automatic Lathe Turret. Specifications: Body OD: 1-5/8" Body Length: 1-19/32" Shank: 5/8" Collet Size Included: 0.168" Overall Length: 3-1/2" Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HARDINGE TT-5/8 RELEASING TAP HOLDER w/ 5/8" SHANK + COLLET Reliable Tool Inc. c 2011 | Powered by
$
28.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
150.00
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
SPV Tapping Chuck 5/8" Shank CGS-8 TK8 Tap Adapter.
$
150.00
Buy It Now
$20.49 Shipping
Condition: Used
Location: Lapeer, United States
January 1994 edition. Also includes installation instruction & extended storage manual. This item brought to you by Ozzy's Treasures, LLC.
$
70.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Hanover, United States
Hardinge ASM-C3 Tool Holder Block.
$
35.00
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Hardinge Lathe HSL 59, DV-59 & DSM-59. I don’t know very much about these lathes. This part is from a DV59 as far as I can tell and from what I understand ... morethe other lathes share the same parts.
$
75.00
Buy It Now
$5.95 Shipping
Condition: Used
Location: Audubon, United States
Hardinge ASM-C8 Tool Holder 5/8" Shank.
$
42.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more).
$
28.00
Buy It Now
Free Shipping
Condition: New
Location: Franklin, United States
$
75.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Johnson City, United States
$
75.00
Buy It Now
$8.74 Shipping
Condition: Used
Location: Gainesville, United States
Most appear to be either lightly used or NOS.
$
299.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Farmingdale, United States
$
55.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Unionville, United States
$
168.88
Buy It Now
$20.05 Shipping
Condition: Used
Location: Baldwin, United States
Hardinge HC Chucker 5 Pole Essex RBM #109199 Relay This relay was from a working machine it is a rocker relay probably forward/reverse It is in excellent ... morealmost new shape
$
45.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Bristol, United States
Hardinge DV59 Lathe Spindle Cover. See all pictures for the best description. Check out my other listings as well. Thank you for looking
$
9.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. ( depends on your device ... more). (Preferred & cheapest).
$
135.00
Buy It Now
$6.50 Shipping
Condition: Used
Location: Waukesha, United States
In excellent condition.
$
279.61
Buy It Now
$42.00 Shipping
Condition: New
Location: Eastlake, United States
Used in Bridgeport Mil ls &Hardinge Lathes. NEED PARTS FOR YOUR BRIDGEPORT?. ASK ABOUT PINT, QUART & GALLON CONTAINERS AS WELL! Spindle Oil #6. ASK ABOUT ... moreOUR SYNTHETIC AND WATER SOLUBLE COOLANTS IN GALLONS AND 5 GALLON BUCKETS!
$
21.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. I am not able to find ... morethe parts diagram so if you have one I would love a copy.
$
18.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I’m sure you are aware but Hardinge made Cataract machines. This was badged Cataract. Based on catalogs they look very similar. There is a couple of options. ... more( depends on your device ).
$
85.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Glendora, United States
$
140.00
Buy It Now
Free Shipping
Condition: Used
Location: Brookfield, United States
Hardinge Lathe Tool Holder Model SG-38 - FREE SHIPPING!.
$
66.55
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
5C Emergency Steel Collet 1/16" Made of high grade tool steel and precision ground Often used to hold irregular shaped work pieces 1/16" pilot hole- can ... morebe drilled, machined, or bored. Three dowel pins are supplied for accurate machining. External thread is 1.24"-20RH internal thread is 1.041"-24RH 5C Emergency Brass Collet 1/16" Often used to hold irregular shaped work pieces 1/16" pilot hole- can be drilled, machined, or bored. Three dowel pins are supplied for accurate machining. Can be drilled, bored or machined with a high speed steel tool bit. Internal and external threaded.
$
85.49
Buy It Now
$9.95 Shipping
Condition: Used
Location: Yakima, United States
Hardinge 22J Collet. We Have Multiple Units Of This Available. Just Ask If You Need Any More!
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 In 

Former Listings  
 
Hardinge HLV-H DV59 Lathe 5C Collet Rack
Hardinge HLV-H DV59 Lathe 5C Collet Rack. Lathe and collets not included! Buyer pays actual shipping only. No added handling fees.
Trav-A-Dial Lathe Carriage Travel Indicator Model 7A w/brackets Hardinge HLV H
Trav-A-Dial Model 7A micrometer for Hardinge HLV- H Lathe. 3R16G and 13681 cast into the mounting bracket. Measures MM& Inches. This tool worked fine when I upgraded my 1971 Hardinge to a DRO. Comes with 35" long hardware for mounting in the T slot on the back of the Hardinge. Sold As Is Where Is. Ignore the $25.00 shipping cost. It is a holding number. Shipping calculated based on buyer's location. Local pickup in North Texas is fine. Can deliver to Hershey. PA in October. Always interested in steam car advertising and ephemera. We buy collections of Stanley and other steam car parts and literature. Avoid the hassles of individual sales and being left with junk. One transaction- your problem solved! Visit the Virtual Steam Car Museum. Support the Museum by saving money on prescription drugs.
HARDINGE HLV LATHE , MILL DRILL SAW GRINDER HOMESHOP MACHINIST TOOLS
FOR SALE USED HARDINGE HLV TOOL ROOM LATHE. THERE IS A COLLET CLOSER WITH IT. ASK QUESTIONS. WILL LOAD NO CHARGE, LOCAL PICKUP OK. BUYER IS RESPONSIBLE FOR SHIPPING. ITEM IS AT ZIP CODE 57005. MACHINE IS UNDER POWER AND YOU MAY RUN IT.
Hardinge DV59 Lathe (Inv.3298)
HARDINGE PRECISION LATHE S/N:DV 59-8730 Model: DV59 Length of Bed 36 in. Swing over bed 9 in. Travel of double tool cross slide 3 ¾ in. Travel of turret slide 4 in. Diam. of turret holes 5/8 in. Variable spindle speeds 230-3500 rpm Approx. wt. 1.000 lbs. EQUIPPED WITH: 6 position turret Quick-acting cross slide Coolant(Inv.3298) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping ... morequotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions
Hardinge DV59 Lathe (Inv.3297)
HARDINGE PRECISION LATHE S/N 83279 Model– DV59 Spindle capacity: With Round 5C Hardinge Collets 1 1/16 in. With Hexagon 5C Hardinge Collets 7/8 in. With Square5C Hardinge Collets ¾ in. With Step Chucks 5 in. With Jaw Chucks(Through Spindle) 1 5/32 in. Length of Bed 36 in. Swing over bed 9 in. Travel of Double Tool Cross Slide 3 ¾ in. Coolant Sump Capacity 3 gals. Approx. wt. 1.000 lbs. Power 220/440/3/60 Motor 2 HP Variable spindle speeds 230– 3500 RPM Equipped with: Dunham Air collet closure Tail Stock Quick acting cross slide with tool post 29 collets(Inv.3297) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: ... moreSkidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions
NICE HARDINGE C16 EXTENSION TOOL HOLDER W/ SET SCREWS, Lathe
Nice hardinge c16 tool holder. Lightly used. Clean.
BISON 7-850-0600 4304 with HARDINGE TAPER BACK 6 1/4" IND 4 JAW LATHE CHUCK
Very Rarely used- in excellent condition- Retails for $1.175 Bison Manual Lathe Chucks Nominal Chuck Size: 6, Through-Hole Diameter(Decimal Inch) 1.6535, Chuck Type: Independent, Adjustable(Yes/No) No, Number of Jaws: 4, Diameter(Inch) 6, Mount: Plain Back, Thru Hole Size(Decimal Inch) 1.6500" Body Material: Cast Iron, Jaw Type: 4 jaw reversible, Manufacturer Part Number: 7-850-0600,
HARDINGE DV 59 DOVETAIL LATHE QUICK ACTION TAIL STOCK
HARDINGE DV 59 DOVETAIL LATHE QUICK ACTION TAIL STOCK Capacity: 5/ 8" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
HARDINGE MODEL H DV 59 DOVETAIL LATHE 6 POSITION TURRET HOLDER
HARDINGE MODEL H DV 59 DOVETAIL LATHE 6 POSITION TURRET HOLDER Capacity: 5/ 8" Model No. H* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
Hardinge DV-59 DSM-59 HLV Precision Lathe Speed Control Motor Adjusting Assembly
Hardinge DV-59 DSM-59 HLV Precision Lathe Speed Control Assembly Came from a mid-1960's DV-59. Needs some paint but otherwise in good condition. End of the indicator bar has a little pitting that looks like it could be polished out. No Reserve. Please see my other listings for more machinist's tools. Parts and accessories. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Hardinge CS-21 CNC Lathe Boring Bar Holder (for T42 CNC Lathe)
One Hardinge CS-21 boring bar holder. Through hole is 1.25" This holder is for T42 CNC lathes.
HARDINGE SPLIT BED LATHE 440VOLTS MOTOR EXCELLENT
HARDINGE SPLIT BED LATHE 440 VOLTS I bought this lathe some time ago to go with my 440 volt 3 phase transformer(see my other auction) But it needed so many accessories. I ended up getting a complete lathe never used it. So here it is. If you can use the bed. Or the 440 volt motor, or the nice pulley system underneath, it will serve you well. I know the motor is good because I hooked up my transformer to the lathe and put 220 3 phase into the transformer. But the levers don't switch the speed or put it into reverse. So it only runs in a forward direction on high speed. But it does run well. Good luck bidding. If you actually want me to ship this, I could strap it to a pallet. Good luck bidding. No returns obviously. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146cc2b6e48-0x118-
HARDINGE SPEED LATHE #_1356 (Inv. 15141)
HARDINGE SPEED LATHE#1356 Model: HSL Year: 1965 Serial No. HSL-5C-676-B. Drive Motor ½ HP. 440/3/60 Swing Over Bed 9 in. Bed Length. Standard 12 in. Overall Height 14 in. Spindle Speeds 750. 1800, 3000 RPM Spindle Capacity Round 5C Collets 1-1/16 in. Step Chucks 6 in. Jaw Chucks 5 in. Expanding Collets 3 in. Includes 3-Jaw chuck Convenient Brake Release for Free Spindle Threaded Spindle QA Collet Closure Dovetail Bed Mounted on Steel Cabinet Base w/drawers Approx. Weight 450 lbs. Inv.15141) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping ... morecharges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions
Hardinge Lathe Machinist Tool Collet Indexer
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Hardinge Lathe Machinist Tool Collet Indexer DESCRIPTION: ~ Up for bid is a good working Hardinge machinist tool. gsrx_vers_566(GS 6.7.1(566)
NICE ROYAL LIVE CENTER 10105, 5MT MORSE TAPER LATHE HARDINGE LEBLONDE JET
NICE ROYAL LIVE CENTER 10105. 5MT MORSE TAPER LATHE HARDINGE LEBLONDE JET This tool comes from a mold shop that closed in Kansas City. They were running Haas. Fadal, Hurco, Sodick, Mitsubishi and other machines. I have other lathe tooling I will be selling. Check out my other auctions and we will happily combine shipping. If you need multiples of what we have listed, ask! We probabily have more. NICE CONDITION ROYAL LIVE CENTER NO. 10105. MORSE TAPER#5 SHANK, THREADED END Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you ... moreknow what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know. sharp. Victor, feeler, south bend, hi-tech, victor, summit, clausing, ball bearing.
SHODA LIVE CENTER 5 UNI-NC, 5MT MORSE TAPER LATHE HARDINGE LEBLONDE JET
SHODA LIVE CENTER 5 UNI-NC. 5MT MORSE TAPER LATHE HARDINGE LEBLONDE JET This tool comes from a mold shop that closed in Kansas City. They were running Haas. Fadal, Hurco, Sodick, Mitsubishi and other machines. I have other lathe tooling I will be selling. Check out my other auctions and we will happily combine shipping. If you need multiples of what we have listed, ask! We probabily have more. SHODA LIVE CENTER NO. 5 UNI-NC. MORSE TAPER#5 SHANK Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding ... moreon. We want you to feel comfortable buying from us. If you have any questions please let us know. sharp. Victor, feeler, south bend, hi-tech, victor, summit, clausing, ball bearing. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-146cf8ca996-0x106-
HARDINGE PRECSION TOOLROOM LATHE WITH CHUCK And collets
Hardinge Lathe Excellent ways Paint not perfect. Call Dave. 860-684-2408.
HARDINGE TAPER ATTACHMENT For HARDINGE HLV-H TOOL ROOM LATHE NICE!
HARDINGE Mfg. Taper Attachment For Hardinge HLV-H Tool Room Lathe Condition: Very Good Questions? call Metro Machine& Tool 732-650-0666
9" Swg Hardinge DSM 59 SECOND OP LATHE, Vari-Speed,5C-collet,Cross Slide&Turret,
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 9" Swg Hardinge DSM 59 SECOND OP LATHE. Vari-Speed,5C-collet,Cross Slide&Turret, Ref# 152680 iammdna XSECOP HARDINGE SECOND OPERATION LATHE MODEL: DSM 59. S/N DV-59-19368, NEW 1992 SPECIFICATIONS: ... moreSPINDLE CAPACITY WITH ROUND 5C COLLETS. 1-1/16" HEXAGON 5C COLLETS. 7/8" SQUARE 5C COLLETS. 3/4" STEP CHUCKS. 1-1/16" TO 6" JAW CHUCKS. 5" JAW CHUCKS THROUGH SPINDLE. 1-5/32" SPINDLE NOSE. HARDINGE TAPER. LENGTH OF BED. 36" SWING OVER BED. 9" TRAVEL OF DOUBLE TOOL CROSS SLIDE. 3-3/4" TRAVEL OF TURRET SLIDE. 4" DIAMETER OF TURRET HOLES. 5/8" VARIABLE SPINDLE SPEED RANGE. 230 TO 3500 R.P.M. APPROXIMATE WEIGHT. 1.100 LBS. APPROXIMATE DIMENSIONS. 68" x 30" x 58" EQUIPPED WITH: HARDINGE HEXAGON TURRET. HARDINGE DOUBLE TOOL CROSS SLIDE. 2) TOOL BLOCKS AND(2) WEDGE-TYPE TOOLPOSTS. MISCELLENEOUS TURRET TOOLS. PUSH BUTTON CONTROL FOR VARIABLE SPEED. BALL BEARING LEVER COLLET CLOSER. SPLASH GUARD. SELF-CONTAINED COOLANT SYSTEM WITH GRAYMILLS PUMP MOTOR. 3/4- 3/8 H.P. 3/60/230 VOLT TWO-SPEED MAIN DRIVE MOTOR AND ELECTRICAL CONTROLS INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE Mac
Cross Slide Rotary Table for Hardinge?? Lathe
Cross Slide Rotary Table for Hardinge? Lathe This table is believed to fit a Hardinge lathe. Table size is 3 3/4" x 10"
Hardinge Model HLV-H Toolroom Lathe w/DRO in Great Condition FREE Shipping
Hardinge Toolroom Lathe Model HLV-H S/N HLV-H-11967-T Year: 1984 220V 3ph motor Equipped with: Sony DRO 6" 4 jaw chuck Steady rest Radius turning attachment 4 degree taper spindle mount Manuals included Lathe came from Boeing. Well maintained. Great deal on a nice Hardinge ToolRoom Lathe! FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: rigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate are additional charges. Item may be picked ... moreup and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged to check out this machine under power at our Phoenix facility. Please contact us for an appointment.
HARDINGE & others 5C COLLETS machinist lathe tools *A7
info/sizes: The 4 largest are Hardinge. The rest are other brands, see last photo for a listing of sizes I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your ... moreshipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
HARDINGE 5" 3 Jaw BUCK Chuck W/ Threaded Mount, HLV-H Lathe
Clean and in good shape. Marked: Hardinge. Made In USA, Mfg. By Buck Chuck" and"2534"
(13) Clean HARDINGE 5C HEX COLLETS SET *ALL DIFFERENT* LATHE GRINDER ID/OD HEX
These tool holders are from a small shop that closed in my area. There are no surprises here. I have many lots of collets to sell. Check out my other lots I have over 300 different tool holders to sell. I will definitely combine shipping where ever possible. This lot is for(13) Genuine Hardinge Hex Collets Sizes in Inches: 1/4. 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Internal threads on 3/8. 1/2, 9/16, 11/16, 13/16, 15/16, 1 Great Set! You don't see these very often in bulk. I have a regular store so if you are interested place a bid or buy it now. I regularly remove items that have sold outside of eBay. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. ... moreThis is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146d6cdc36e-0x11f-
Hardinge HSL-59 Lathe *** Very Clean Machine ***
HARDINGE HSL-59 Lathe(You won't find one nicer then this one on Ebay. Here is you change to own a"TOP SHELF" USA MADE Lathe*Used* Looks almost like New! Has slight scratches& marks. But is the original paint. Not repainted or touch-up. Bench is included. We have over 200 Used Hardinge/Prost Collets in Stock and tons of tooling for Hardinge's. Give us a call and we can get you what you need! Please" Inquire before purchasing. We are also offering this at our location where it is being sold to the public. We Also have Some Hardinge's at a lower price. We are a OEM Machine Shop that has been in Business for 45 Plus Years We are cleaning out our excess equipment/parts to make room for New Equipment. We have shelves of tooling and accessories for all your machining needs. Cutters. Collets, Surface Plates, Inspection- ... moreEtc. Please Contact us for more information BMCMACHINE@Yahoo.com 847-516-9525 Please check out our other auctions. Int'l Buyer please call for a Quote.
Hardinge HC Hand Chucker Lathe w/Collet Closer FREE Shipping
Hardinge HC Hand Chucker Lathe s/n HC-5981T Year: 1981 230V 3ph motor Equipped with: 5C Collet closer Misc. toolholders Some 5C collets In very good condition Nice Hardinge Hand Chucker! FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: rigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate are additional charges. Item may be picked up and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged ... moreto check out this machine under power at our Phoenix facility. Please contact us for an appointment.
HARDINGE SBA-4 ADJUSTABLE TOOL HOLDER LATHE PARTS RARE HARD TO FIND 003
HARDINGE SBA-4 ADJUSTABLE TOOL HOLDER LATHE PARTS- 003 EX-mod-units- Please feel free to call for further information. Outside of UK Mainland; then please contact regarding courier cost. Before purchase, as costs will differ. As photo: UP
Hardinge HV-4, 5C Collet Index Fixure, 24 Position, Horizontal Vertical, Lathe
Hardinge HV-4. 5C Collet Index Fixure, 24 Position, Horizontal Vertical, Lathe From a Medical special job shop in Minneapolis that closed I have for sale: Hardinge Model HV-4 5C Collet Index Fixure 2-Position Mounting Horizontal/ Vertical 24 Position Indexing Plate 15 Degree Anglular Positioning Includes(10) Assorted 5C Collets some Hardinge Brand Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
Hardinge HV-0N, 5C Collet Index Fixure, 24 Position, Horizontal Vertical, Lathe
Hardinge HV-0N. 5C Collet Index Fixure, 24 Position, Horizontal Vertical, Lathe From a Medical special job shop in Minneapolis that closed I have for sale: Hardinge Model HV-0N 5C Collet Index Fixure 2-Position Mounting Horizontal/ Vertical 24 Position Indexing Plate 15 Degree Anglular Positioning Threaded Nose Includes(10) Assorted 5C Collets some Hardinge Brand Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please ... morelet us know. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146dceee8d8-0x113-
8 HARDINGE 3J Collets for Lathe Chuck, CNC or manual engine mill, set size
8) Hardinge 3J Collets: 1-5/8" 1-1/2" 1-1/4" 1" 7/8" 3/4" 1/2" 3/8" Any questions please call(262)895-3462 g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146dcfbdb71-0x106-
RIVETT 6R 3/8" Precision Round Lathe Collet made in USA Hardinge Type 0.3750"
For Sale are(1) priced each- 1 bidding on one each) USED. RIVETT MACHINE PRODUCTS Brand Model 6R Precision Round Lathe Ground Collet 3/8" 0.3750" diameter) weighs 15 OZ. net( ships at 1- 2 lb EACH Collet) Made at the Original Factory in U S A( not India_ or China_ plants) 1.75" dia x 5" long Used- in good condition- all original BOSTON MACHINERY INC PEABODY. MA 01960 978-532-1112* we have many collets. Index heads, fixtures etc for sale- just let us know what you need- we can find it here NEW or USED- thanks- plus we have many more turret tool holders. Sheet metal machines- Proto Trak Mills and Lathes- and alot more Thanks/ Paul.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-146e0005360-0x105-
Rare Antique Hardinge Adjustable Steady Rest for the Watchmaker's Lathe
Rare Antique Hardinge Adjustable Steady Rest for the Watchmaker's Lathe For the watchmakers and the horological tool collectors out there. This is the"Holy Grail" of steady rests made for the watchmaker's lathe! As most are aware, the Hardinge Brothers Company from Chicago manufactured only top quality tools and collets for the watchmaking trade. They mainly made accessories to fit the many contemporary brands of watchmaker's and small precision lathes that were available in the early 20th century. This particular accessory was made to fit a standard"W-W" style watchmaker's lathe, so it can be used on any American Watch Tool, Levin, Derbyshire, Lorch, Boley, Wolf-Jahn or other"W-W" style lathe with 50 mm center height. As you can see in the photos, it is rapidly adjustable to fit the work you ... moreare turning, by simply rotating an adjusting ring with spiral grooves that engage the three jaws. The ring is adjusted with a special pin spanner that fits the two holes in this ring, as you can see in the photos. The jaws can then be locked in that position with the knurled knob at the base of the steady rest. This 100+ year old tool is in excellent condition with all the original plating. Aside from the two scratches on one side, there are no other signs of any abuse, and it functions perfectly. The wrench is not original, but was made some time ago by a craftsman who did a nice job. It fits perfectly. The jaws are also reversible to allow for a broader range of radii. These steady rests are a pleasure to use, and they are quite hard to come by. I photographed the tool on a standard Levin"w-w" style lathe for illustration. The lathe is not included in the auction) I also photographed two pages from an original Hardinge catalog from circa 1910, and as you can see, the price for this model was $12.00, or nearly double the $6.50 cost for a conventional steady rest which required the jaws to be adjusted individually. I have owned three of these rests over the past 40 year
Hardinge Type 2nd Operation Speed Lathe
Hardinge type 2 nd operation speed lathe with production 5c collet closer and unique X/Z cross slide Converted to 3 Phase Variable speed control. Approximate overall size 20” X 36” X 48” estimated weight 650 lbs.
Hardinge Conquest 42 CNC Lathe, GE Fanuc O-T Control, Sub Spindle,Live tools,16c
Used- Hardinge Conquest 42 2-Axis CNC Lathe with Live Tooling and Sub-Spindle.16C COLLET,COMES WITH ALL MANUALS Serial No. CS-1140-C New- 1993? FOR SHIPPING QUOTES CALL TINA AT 727-362-8318.ALL OTHER QUESTIONS CONTACT GERRY AT 727-547-0616 WEIGHT 12.500 LBS LATHE CAN BE INSPECTED UNDER 220 VOLT 3 PHASE POWER RUNNING. THIS LATHE IS BEING REPLACED WITH A NEW CNC LATHE. IF YOU PURCHASE THIS ONE AND WAIT FOR THE RIGGERS TO PUT THE NEW LATHE IN. THERE WILL BE NO LOADING CHARGE, APPROX JULY 9,2014, AFTER THIS DATE LATHE WILL BE PUT IN STORAGE AND YOU WILL NOT BE ABLE TO SEE IT RUNNING AND THERE WILL BE LOADING CHARGES SPECIFICATIONS: Swing Over Upper Way- Maximum 19-1/2" Swing Over Lower Way- Maximum 14-1/2" Distance Between Centers- Maximum 13-13/16" Rapid Traverse Rate X-Axis- Maximum 472 IPM Rapid Traverse Rate Z-Axis- Maximum ... more630 IPM Hole Through Spindle 1-7/8" Motor 5.5 KW Spindle Speed 50-5.000 RPM Electrics 208-230V/3Ph/60Hz Approximate Floor Space Required with Chip System 122" x 54" x 68" Approximate Machine Weight 9.000 Lbs. 10-STATION VERTICAL TURRET WITH LIVE TOOLING: X-Axis Travel- Maximum 5-7/16" Z-Axis Travel- Maximum 13-41/64" Turning Diameter- Maximum 9-3/32" Live Tooling Holders(Speed Range in 1-RPM Steps) Up to 4.000 2ND OPERATION SUB-SPINDLE: Distance from Spindle Face to Casting Face- Maximum 17-1/2" Travel- Maximum 11-1/2" Rapid Traverse and Return Rate 300 IPM AC Anolog Drive(Speed Range in 1-RPM Steps) Up to 3.000 RPM EQUIPPED WITH: GE Fanuc OT CNC Control(10)Position Turret with(5)Live Tooling Positions Sub-SpindlE Turbo Systems Chip Conveyor& Coolant Package Parts Catcher HARDINGE TOOLING PACKAGE: 2) CS-54 Live Tools(2) CS-50 Live Tools(1) CS-46 Block Tools(1) CS-42 Block Tools(1) CS-38 Block Tools(3) CS-30 Block Tools(2) CS-21 Block Tools(1) SG-CE Block Tools On Jun-28-14 at 09:05:54 PDT. Seller added the following information:
HARDINGE VBS Turret Chucking Lathe Second Operation With 5C Collet Closer
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 HARDINGE VBS Turret Chucking Lathe Second Operation Lathe With 5C Collet Closer No Cross Slide Please see pictures for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids.
Chuck metal lathe chuck Hardinge 47 4 inch treaded chuck NOT 59
Small Union made Hardinge chuck self centering jaws. made for the 47 lathe not the more common 59 Threaded back looks to be a 1 5/8 thread maybe 1 9/16 works fine for every day use it was from a older 1959 lathe key included.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-146e6673662-0x10f-
Hardinge DV-59 Precision Engine Lathe
Hardinge Lathe Model DV-59 equipped for production with Gilman slide. 2 available at this price. SPECIFICATIONS: SPINDLE CAPACITY. WITH ROUND 5C COLLETS. 1-1/16" HEXAGON 5C COLLETS. 7/8" SQUARE 5C COLLETS. 3/4" STEP CHUCKS. 1-1/16" TO 6" JAW CHUCKS. 5" JAW CHUCKS THROUGH SPINDLE. 1-5/32" SPINDLE TAPER. 2-3/16" R.H. LENGTH OF BED. 36" SWING OVER BED. 9" DISTANCE BETWEEN CENTERS. 17" TRAVEL OF TOP SLIDE. 4-1/4" TRAVEL OF BOTTOM SLIDE. 5" TRAVEL OF TAILSTOCK SPINDLE. 3-1/2" TAILSTOCK SPINDLE TAPER. 2 MORSE. TOOL POST CAPACITY. 3/8" X 1" INFINITELY VARIABLE SPINDLE SPEED RANGE. 230 TO 3.500 R.P.M. APPROX DIMENSIONS. 68" L-R X 32" F-B X 70" H. APPROX WEIGHT. 1.100 LBS.
Hardinge Lensmaster Lathe for Contact Lens Lenses w/ Radius Turning Lens Master
Hardinge Lensmater Lathe Well maintained and fully functional contact lens lathe. This is set up to run automatically using plastic blanks that are fed in and turned to contact lenses. The system can be modified for your own use. The system is run by an AEG PLC system and the radius attachment is run by a hydraulic cylinder for smooth and accurate movement. The lathe has been well maintained and there is a maintenance log book included(the belt was changed on 7/9/13) Power is 120 VAC. Single phase utilizing a Variac speed control. Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($50 packaging fee added to total) or we can provide a competitive quote to the buyer. Shipping weight 500 lbs. International ... moreBuyers– Please Note: International packaging of these items will be $300 for crating Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146ebce1cfd-0x114-
MANY ASSORTED HARDINGE 215 COLLETS CNC LATHE LEBLOND x/64" x/32" x/16"
These Collets are surplus from a military aeronautics manufacturer in Dallas Texas that starts with a B. As I toured the plant it was clear the operators got everything then needed and only the best brands were being used. These were surplused because they sold their Devleig boring mills. 98% of what they cut was aluminum. Check out all my listings we are starting with over 300 Tools. We will combine shipping whenever we can. The price of $25.00 is for quantity(1) 215 Collet only. Most of These Are Hardinge Brand. Stamped(215) on collet. I will list the sizes available. Please make offer before you purchase so we can make sure the size you need is still available. I will update this list as items are sold. These Collets are offered at merely a fraction of the price new! 3/8" 1/4" 9/32" 1/8" 1-5/16" 7/16" ... more5/16" 1-1/2" 9/16" 11/16" 1-1/16" 3/4" 19/32" 23/32" 1-7/16" 1-9/16" 13/16" 1-9/16" 13/16" 1-1/8" 1-11/16" 1-5/16" 1-1/32" 1-5/32" 1-23/32" 1-7/16" 19/32" 11/32" 21/64" 15/32" 5/8" 17/32" 1-5/8" 41/64" 21/32" 7/8" 27/32" 13/16" 15/16" 1-3/32" 1-1/16" 31/32" 1-3/8" 1-7/32" 1-3/16" 1-7/16" 1-15/32" 1-1/2" 1-5/8" 1-19/32" 1-11/64" 1-3/4" 25/32" 3/16" 15/16" 11/16" 29/32" 1" 1-1/8" 1-3/8" 1-1/4" 1-5/8" 1-17/32" 1-11/16" The price of $25.00 is for quantity(1) 215 Collet only. Please make offer before you purchase so we can check to make sure that size is still available. I will consider a price break on qty(5) or more collets. Collets will ship in a USPS Flat Rate box(as many will fit) to offer you the cheapest shipping rate. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us
Hardinge JC Collet 1/4" hex hole engine lathe Lodge Shipley Monarch Enco R#0064
For sale is a Hardinge JC 1/4" hex smooth collet! Make: Hardinge Size: 1/4" hex Condition: Used; has a minute amount of scratches and nicks. It is in Great used condition! This Collet is rare find. You don't want to be the one to miss out! Note: Currently I do not know very much info on this collet; so if you have any information regarding what collet chuck its paired with that would be very kind of you. If you have any questions about this item or any other items listed feel free to send us a message! All items under 150 Lb's are shipped out with UPS Ground with insurance and a Tracking number. I can combine shipping to help lower the cost of shipping for the purchase of multiple items. Please note to buyers outside the United States. Please ask for a shipping quote before placing a bid or buying an item. Buyer pays all ... moreshipping; Ohio Sales Tax Rules Apply; Payment must be received within 7 days of close of sale. Sold AS IS. So no returns or refunds. I reserve the right to cancel this listing at any time no matter if there are active bids because this item is for sale locally. Good luck and happy bidding!
Boley Jeweler's & Watch Repair Lathe Set - Tools -The Rivett - Collets -Hardinge
A fine quality Jeweler's- Watchmaker's Lathe Tool Set. The large Lathe is marked"Boley" An accessory piece is marked. The Rivett" and has a patent date back in the 1800s. The motor is marked. Hamilton Beach Mfg. The appearance of the pieces is very good. We haven't tried or tested the set or pieces. The number of pieces is over 60. The set needs some cleaning. The different pieces could be cleaned up and polished. The set would display as a real showpiece. The set weighs a combined 26 pounds.
Hardinge lathe 2 axis compound cross slide attachment DSC
Hardinge 2 axis cross slide compound for a lathe. Model DSC dv59 or feeler lathes. unit is in very good condtion. We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172 alum a bottom. Cd.
9 HARDINGE SMALL COLLETS CHUCKS JEWELERS LATHE workholding machinist tools *D
1.1 inches long. See photos for sizes I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great ... moredeals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
HARDINGE TAPER ATTACHMENT FOR HLV OR TFB LATHE
HARDINGE TAPER ATTACHMENT FOR HLV OR TFB LATHE EXCELLENT CONDITION! THIS TAPER ATTACHMENT IS COMPLETE AND WORKS GREAT! QUESTIONS? CONTACT BOB@ 763) 753-3263
BISON 6" 4-JAW 5251 UNIVERSAL SCROLL LATHE CHUCK w/HARDINGE 4% TAPER C25 PLATE
BISON 6" 4-JAW UNIVERSAL SCROLL CHUCK with HARDINGE 4% TAPER ADAPTER PLATE- BISON 6" 4-JAW UNIVERSAL SCROLL LATHE CHUCK with HARDINGE C25 ADAPTER PLATE INVENTORY# 5259 MODEL: 5251 S/N: 0S16GZJ MADE IN POLAND SPECIFICATIONS: STEEL BODY CHUCK SIZE: 6” THRU-HOLE SIZE: 1 1/2" ADAPTER PLATE: MODEL: C25 MOUNT: HARDINGE 4 ANGLE DIMENSIONS: 6" DIAMETER x 3" HIGH(MINUS JAWS) WEIGHT: 23 1/2 LBS VERY GOOD CONDITION NEW REPLACEMENT COST(CHUCK + ADAPTER) IS $ 2.100.00 FOB Our Floor CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings ... morecurrent for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for return shipping. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off
Hardinge Vertical Cutoff Slide Attachment w/ Bimba Pneumatic Cylinder CNC Lathe
Thanks for visiting our auction! Up for bid is a Hardinge Vertical Cutoff Slide Attachment w/ Pnematic Cylinder Control which includes Bimba Cylinders and Deschner adjustable Hydralic Model 1004-31-1. IN GOOD WORKING ORDER! Payment and shipping: Winning bidder will receive FREE SHIPPING TO LOWER U.S. 48 STATES ONLY! Payment via Paypal ONLY UPS Ground Shipping. Item will be shipped within one business day of payment receipt. Thanks and Happy Bidding!
WILLIAMS #81 LATHE BORING TOOL HOLDER LOGAN SOUTH BEND HARDINGE CLAUSING
WILLIAMS#81 LATHE BORING TOOL HOLDER LOGAN SOUTH BEND HARDINGE CLAUSING Brand Williams Packaging None Condition Good Quantity 1 1 1/8" x 1/2" Shank. Screws are not original. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LARGE 2 1/16" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH
LARGE 2 1/16" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH Brand Unknown USA Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LARGE 1 3/8" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH
LARGE 1 3/8" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH Brand Unknown USA Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
BIG ASSORTED LOT OF LATHE TOOL HOLDERS & ACCESSORIES HARDINGE C4 B&S 00DA
Big Assorted Lot of Lathe Tool Holders& Accessories Lot Includes: Hardinge C4 Boring Tool Holder Brown& Sharpe Model No. 00A Cut-Off Holder Brown& Sharpe No. 00DA 5/8" Capacity Holder All Other Accessories Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever po ssible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you ... moremust wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-147067ad1dc-0x104-
Hardinge Conquest GT CNC Lathe w/ Fanuc 18T Inst Manual
Our internal inventory number on this product is 3#MN-24N/3 OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on an INSTALLATION INSTRUCTION Manual for a Hardinge Conquest GT CNC Lathe with Fanuc 18T Control! It has manual#M-244C. Part#M C- 0009500-0244. Copyright Date January. 1994. It is +/ 40 Pages. Seems complete and in generally FAIR used condition! These manuals ratings(Poor. ... moreFair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you, please don't buy it. If there are any obvious deficiencies, we will always strive to let you know, but things can get overlooked. Please check out our Feedback, we are straight shooters! NOTE* Top Bidder to pay $8.00 S&H charge if shipped in the lower 48 states. International shipments or Alaska& Hawaii to pay actual costs + $2.00 Handling! The $2.00 handling charge would also apply to pick up orders. NO combined shipments with other auctions on these boards as they are bulky! We only accept Paypal or USPS Money Orders on Payments of under $250.00! For payments over $250.00 we prefer Paypal or USPS Money Orders. But will accept other forms of certified funds and company checks(non certified checks held 10 business days for clearance) Good Luck& Good Bidding! OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! 33
HARDINGE LATHE COMPOUND CROSS SLIDE ASSEMBLY FOR CHUCKER or SPEED
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Hardinge Compound Cross Slide in Good. Working Condition.Some Surface issues but Otherwise in GoodWorking Order Item Features& Specifications: Model# Unknown Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. All Returns are Returned at the BUYERS Expense. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
Hardinge 4-Jaw Chuck for Watchmakers Lathe, Standard WW Threads
This chuck is marked"GERMANY" and appears to be early 20th century. It is in usable condition and fits the lathe I have for sale in another listing. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14722e9ec52-0x104-
PRECISION HARDINGE CATARACT BENCH TOP LATHE WITH SOME TOOLING GOOD USED
PRECISION HARDINGE CATARACT BENCH TOP LATHE WITH SOME TOOLING GOOD USED THIS IS A GOOD USED HARDINGE CATARACT BENCH TOP LATHE COMES AS SHOWN ORIGINAL COLLET DRAW TUBE. 3 JAW YUASA SELF CENTERING CHUCK, 4 JAW CHUCK, COMPOUND CROSS SLIDE SOME DAMAGE BUT WORKS GOOD, TOOL REST BED#3463 HEADSTOCK#1686 EMERSON MOTOR 1725 RPM,115VOLT 3/4 HP, I BELIVE THE BELT SETUP IS 9 SPEED WHAT EVER ELSE IS IN PICTURES IS INCLUDED. DO TO WEIGHT WILL SHIP FEDEX IN TWO BOXES THANKS FOR LOOKING AT MY ITEM.
Hardinge Model DV-59 Precision Toolroom Lathe - Well Equipped, New 1981
Gold International Machinery Corporation | Hardinge Model DV-59 Precision Toolroom Lathe Our Inventory Number: 0669-440 Technical Specifications: 220V/3PH/60HZ, Year of mfg. 1981, S/N: DV-59-17225, Motor: 1 HP, Capacity: 1-1/16" round 5C collets, Swing over bed: 9" Distance between centers: 17" Length of bed: 36" Spindle speeds: 230- 3500 RPM. Variable, Overall size: 67" x 30" x 57" high, Estimated weight: 1150 lbs. Equipped With: Coolant system, Hardinge factory stand, Lever operated cross slide, Lever operated 5C collet draw bar, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third ... moregeneration family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached
Hardinge lathe attachment threading tail stock
Hardinge lathe attachment. Never seen one before and not sure what to call it or if its complete. sold as is. I was told it was a thread cutting attachment. check ruler in photo to confirm bed size so you will know if its the right size for your lathe. We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172
HARDINGE HLV-H-EM PRECISION TOOLROOM LATHE - 2-AXIS DRO - TOOLING
HARDINGE HLV-H-EM PRECISION TOOLROOM LATHE* Excellent Condition SPECIFICATIONS WITH ROUND 5C COLLETS: 1-1/16″ WITH HEXAGON 5C COLLETS: 7/8″ WITH SQUARE 5C COLLETS: 3/4″ WITH STEP CHUCKS: 6″ WITH JAW CHUCKS: 5″ WITH EXPANDING COLLETS: 3″ SPINDLE NOSE: 5C HARDINGE TAPER NOSE, VARIABLE SPINDLE SPEEDS: 125 TO 3.000 RPM, MAIN SPINDLE MOTOR(2-SPEED) 1/2– 1 HP, SWING OVER BED: 11″ SWING OVER CARRIAGE: 9″ SWING OVER CROSS SLIDE: 6″ DISTANCE BETWEEN CENTERS: 18″ HOLE THROUGH SPINDLE: 1-1/4″ SPINDLE CENTER CONCENTRICITY: 0002, COMPOUND SLIDE TRAVEL: 3″ CARRIAGE POWER FEED RANGE: 5/16 TO 7 IPM, CROSS SLIDE POWER FEED RANGE: 3/16 TO 4 IPM, SIZE OF LATHE TOOL, WEDGE-TYPE: 3/8″ X 3/8″ ROCKER-TYPE: 3/8″ X 1″ TAILSTOCK SPINDLE DIAMETER: 1-3/8″ TAILSTOCK SPINDLE TRAVEL: 3-3/4″ TAILSTOCK SPINDLE TAPER: 2 MORSE TAPER, TAILSTOCK ALIGNMENT– VERT& HORZ: 0005, ... moreTOOL SLIDE GIB W/FULL DOVETAIL BEARING: 0005, CROSS SLIDE GIB W/FULL DOVETAIL BEARING: 0005, TRAVEL OF CROSS SLIDE: 5-1/2″ LEADSCREW DIAMETER: 1″ 8 THREAD, LEADSCREW ALIGNED W/BED AT ENDS– VERT& HORZ: 001, RANGE OF THREADS IN GEARBOX: 11 TO 108, NUMBER OF THREAD CHANGES IN GEAR BOX: 27, THREADS CUT THROUGH GEARBOX: 11. 11.5, 12, 13, 14, 15, 16, 17.5, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 35, 36, 40, 44, 46, 48, 50, 52, 54, 56, 60, 64, 70, 72, 80, 100, 108 TPI, PITCHES PER MILLIMETER: 4375. 2875, 875, 625, 575, 375, 325, 275, 75, 65, 55, 45, 35, 9, 8, 7, 6, 5, 4, 3, 1, 1.15, 1.25, 1.35, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.75, 1.8, 2, 2.5, 2.7, DIMENSIONS: 72” LR X 29” FB X 66” H, MACHINE WEIGHT: 2.250 LBS, ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, EQUIPPED WITH LEVER TYPE COLLET CLOSER, 2-AXIS DIGITAL READOUT, ALORIS TOOL POST, 3-JAW CHUCK, FOLLOW REST, FACE PLATE, ASSORTED COLLETS, DRILL CHUCK, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING* WE ARRANGE FREIGHT T
HARDINGE HLVH PRECISION LATHE - ALOT OF TOOLING & COLLETS
HARDINGE HLVH PRECISION LATHE Year: 1968/ Model: HLV-H Swing Over Bed: 11" Swing Over Carriage: 9" Swing Over Cross Slide: 5-3/4" Distance Between Centers: 18" Spindle Mount: Hardinge Taper with 5-C Collet Internal Taper Variable Spindle Speeds: 125 to 3000 RPM Spindle Thru Hole Diameter: 1-5/32" Collet Capacity in Round Stock: 1-1/16" Variable Feed Rates. Longitudinal: 5/16 to 7 IPM Variable Feed Rates. Cross Feed: 3/16 to 4 IPM(27) English Threads: 11 to 108 TPI#3 MT in Tailstock Quill. 3-5/8" Quill Travel EQUIPPED WITH: 2-Axis Power Variable Feeds Quick Retract Top Compound Inch Graduated Dials on Each Axis& Tailstock Quill Leadscrew with Quick Change Gear Box- Inch Only Control Levers for High-Low Speed& Forward-Stop-Reverse Spindle Brake On-Off Selector Switch Coolant On-Off Auto Selector Switch(2) ... moreAdjustable Carriage Feed Kick Out Stops One Shot Lube to Carriage Hard Dovetail Bed Ways(Good Condition) Carriage Taper Attachment Cabinet Base with Collet Racks 5" 3-Jaw Chuck with 1-Piece Hard ID and OD Chuck Jaws 5" 4-Jaw Chuck with 1-Piece Hard ID and OD Jaws Assorted Chuck Wrenches 6" Face Plate(1) Driver Dog Plate(1) Jacobs 0 to 1/2" Key Type Drill Chuck with#1 Morse Taper Mount and Chuck Key(1) Jacobs 0 to 1/2" Key Type Drill Chuck with#2 Morse Taper Mount(1) Cushman 0 to 1/2" Key Type Drill Chuck with#2 Morse Taper Mount(1) 2 to#1 Morse Reduce Sleeve(1) Rocker Arm Type Tool Post with 2 Straight Cutter Holders(1) Cutoff Type Tool Holder(No Blade) 2) Spare Graduated Axis Dials(1) End Quadrant Arm with 3 Attached Gears + 2 Gears on Machine(2) Hardinge Tool Holders#D9 Machine Work Light(1) Dead Center(62) Assorted 5-C Collects. 1/16" to 1- 1/32" 1) OD 5-C Collet(1) 3" Steady Rest(Solid Type) Spindle Nose Cover Piece Enco#281-3215 Quick Change Tool Post Hardinge Operators and Maintenance Manuals. 1/10 HP Coolant Pump Motor. 3 Phase, 60 Cycle, 220 Volts Only 1/5 HP 2-Speed Main Motor. 3.4 AMP, 3 Phase, 60 Cycle, 208 Volts Onl
Vintage Hardinge Cataract Lathe Tailstock No.2308
Vintage Tailstock from Hardinge Catatract Style Lathe Marked No. 2308 Great for your Vintage Hardinge Lathe Project. Up for offer is a nice Vintage Tailstock from a Hardinge Cataract Style Lathe. Not sure if this is an original Hardinge part or not. Marked No. 2308 in casting as shown in photos. Came off of a Hardinge lathe(not included) in picture numbers 2-3. Tailstockt is vintage. Thus it shows normal wear from use and storage including small scratches, scuffs, marring and some discoloration and grime. Should clean up well. This unit is missing attachment hardware that will attach it to lathe bed. Also missing locking bolt to lock arbor. The measurement from the base of the tail stock where it would mount to the lathe bed to the approximate center is 3 1/2" Unit measures approx. 12 1/2" in length overall including crank handle ... moreand 5 1/2" tall. Bottom measures 3 3/8" x 5 3/4" Channel measures approx. 2 19/32" at narrowest point and 3 1/16" at widest. point. Paint is overall good and looks original with some loss. Wheel turns easily and smoothly All components look good overall. Auction includes steady rest assembly only as shown with no other parts. Lathe and other objects pictured are not included in this auction. Sold as-is. 14 day returns allowed. Overall. This is a great tail stock that will be a fantastic addition to your vintage Hardinge lathe. These are extremely hard to find. Get this one while you can. Please check my other auctions as I will be parting out the remainder of lathe pictured in several days. Items generally ship within 1 business day via USPS with tracking information uploaded upon shipping. 14 day returns allowed(see details below) Please Read Before Bidding or Buying I have represented this item to the best of my limited ability. Buyers responsibility to examine all photos with care and read description fully. Please ask any questions before bidding or buying. Buyers responsibility to determine condition. Completeness, fitment, use, usability, function
Vintage Hardinge Cataract Lathe Steady Rest 7" Swing M6-326 Steadyrest
Vintage Steady Rest from Hardinge Catatract Style Lathe Marked M6-326 Up for offer is a nice Vintage Steady Rest from a Hardinge Cataract Style Lathe. Not sure if this is an original Hardinge part or not. Marked M6-326 in casting as shown in photos. Came off of a Hardinge lathe(not included) in picture numbers 9 thru 11. Steady rest is vintage. Thus it shows normal wear from use and storage including small scratches, scuffs, marring and some discoloration and grime. Should clean up well. The measurement from the base of the steady rest where it would mount to the lathe bed to the approximate center is 3 1/2" Thus making it used on a lathe with a approximate 7" swing. Diameter of thru hole is approx. 2 1/2" Base measures approx. 1 5/16" x 1 5/8" Protruding piece that goes between the lathe bed measures approx.7/16" ... morePaint is overall good and looks original. Screws turn in and out well. All components look good overall. Has threaded shaft assembly to connect to lathe bed. Shaft measures 4" in length. Auction includes steady rest assembly only. Lathe and other objects pictured are not included in this auction. Overall. This is a great steady rest that will be a fantastic addition to your vintage Hardinge lathe. These are extremely hard to find. Get this one while you can. Please check my other auctions as I will be parting out the remainder of lathe pictured in several days. Items generally ship within 1 business day via USPS with tracking information uploaded upon shipping. 14 day returns allowed(see details below) Please Read Before Bidding or Buying I have represented this item to the best of my limited ability. Buyers responsibility to examine all photos with care and read description fully. Please ask any questions before bidding or buying. Buyers responsibility to determine condition. Completeness, fitment, use, usability, function and collectability before bidding or buying. As this is a pre-owned item it may have imperfections both mechanical and/or physical that were either
HARDINGE DV-59 LATHE W/ CROSSLIDE
Hardinge DV-59 w/crosslide collet closure& 3-jaw chuck. SELLING AS IS WHERE IS BUYER IS RESPONSIBLE FOR ALL SHIPPING AND RIGGING COSTS 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1472b0035f7-0x108-
5" Chuck Mounting Plate from Hardinge Lathe w/Threaded Spindle Nose & #252 Chuck
Offered here is a 5" diameter Chuck Mounting Back Plate that came from a Hardinge Lathe with the threaded spindle nose. The chuck is marked for use with a# 252 chuck. The machined flange measures 4.125" The plate looks like it could use a cleaning and appears to be in good condition.
Hardinge TFB Lathe 11" x 18", Precision Turning Facing and Boring 23286
in titles& description Name: Hardinge TFB Lathe 11" x 18" Precision Turning Facing and Boring, Ticket# 23286, Model: TFB, Size: Approx 11" x 18" Manufacturer: Hardinge, Item located at: Morrisville. PA, Condition: Used, Terms& Condition: As is where is, Description: Specifications from manufacturer: SPINDLE CONSTRUCTION: HARDINGE SUPER-PRECISION PRELOADED BALL BEARING SPINDLE CAPACITY: WITH ROUND 5C COLLETS: 1 1/16" WITH HEXAGON 5C COLLETS: 7/8" WITH SQUARE 5C COLLETS: 3/4" WITH STEP CHUCKS: 1 1/16 TO 6" WITH JAW CHUCKS: 5" WITH EXPANDING COLLETS: 3" SPINDLE NOSE: HARDINGE TAPERED VARIABLE SPINDLE SPEEDS: 125-3000 RPM SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" HOLE THROUGH SPINDLE: 1 1/4" COMPOIND SPINDLE ... moreTRAVEL: 3" POWER FEED RANGE: 1/4 TO 7 PER MIN. SIZE OF LATHE TOOL: WEDGE TYPE: 3/8 X 3/8" TAILSTOCK SPINDLE IAMETER: 1 3/8" TAILSTOCK SPINDLE TRAVEL: 3 3/4" TAILSTOCK SPINDLE TAPER: No. 2 MORESE STEADY REST OPENING: 3" WEIGHT(APPROX) 1500 LBS | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Hardinge CNC Lathe Model Cobra 42
USED HARDINGE CNC LATHE MODEL COBRA 42 General Specifications: Chuck Size: 6: Bar Capacity: 1-63" Max. Turning Length: 14" Swing Over Bed: 21" Spindle Speeds: 50- 5000 RPM Spindle Bore: 2" Turret Stations: 12 Rapid Feeds: X& Z Axis) 480/630 IPM Travels: X-Axis: 7.75" Z-Axis: 14" Complete With: Motor& Controls Fanuc Controller Model 21-T Barfeed Unit No Tailstock Chip Conveyor Miscellaneous 16C Collets Available Manuals NOTE: WE DO NOT TAKE PAYPAL FOR PAYMENT
Hardinge Cataract 4C Bench Lathe STEP PULLEY, IDLER, FLAT BELT Machinist
Hardinge Cataract 4C Bench Lathe STEP PULLEY. IDLER, Leather FLAT BELT Machinist The flat belt is older but appears serviceable. Cone pulley has 7/8" bore and idler has a bronze bushed 3/4" finished bore Uncleaned, undoctored condition. A good sound example. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent or good condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
Beautiful Hardinge Cataract Bench Lathe LANTERN TOOL POST Machinist
Beautiful Hardinge Cataract Bench Lathe 4C LANTERN TOOL POST This item is in original undoctored condition- A good sound example with a few hits as shown on the rocker. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent or good condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1474361c1ce-0x10a-
Vintage Hardinge Cataract Bench Lathe 4C HEADSTOCK Machinist
Hardinge Cataract Bench Lathe 4C HEADSTOCK The Spindle tapers and T-lock appear to be in good condition- Please see photos of details A good sound example. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent or good condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
Hardinge Cataract Bench Lathe 4C Nose FACE PLATE Drilled and tapped 7" swing
Hardinge Cataract Bench Lathe 7" swing/3-1/2" center height 4C FACE PLATE Drilled and tapped This item is in original undoctored condition- shows signs of cuts and work- in need of restoration 3/4" thick and 7" dia taper and pin is very good. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent or good condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
HARDINGE S-26 MASTER COLLET + NOSE A-8 spindle + pads, cnc lathe turning center
Selling a used unbranded a8 collet nose. This collet nose includes a hardinge gridley 2-5/8 master collet for use with s26 collet pads. Also included is 14 hardinge dimensional s26 collets and 6 E or emergency collet pads. Some of the E pads are cut. Retail on a similar hardinge collet nose is over $3400 on shop hardinge.com. S26 collet pads are listed at $120.00 each for the dimensional and $80 each for the E collets. Total retail value if bought new would be around $5000. Collet nose is in good condition, where are some blemishes as seen in the photos, however the should not affect functionality. The master collet has some damage on its face, looks like it may have hit a tool holder, however this should not affect functionality.
DORIAN D40CA-1 O.D + Hardinge C18 TOOL HOLDER 1" LATHE TURNING FACING MILL POST
DORIAN D40CA- + Hardinge C18 TOOL HOLDER 1" LATHE TURNING FACING Additional sizes shown inn photos Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive I go to the post office at everyday at 1.00pm Monday- Friday if an item is bought and payed for before then item will be send it the same day if any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service and Great deals Thank You For Viewing
PROMACH SECOND OP LATHE - DV-59 - DSM-59 - 6-STATION TURRET - HARDINGE TAPER
Made by Promach Limited. This is a used Second Op Lathe in GREAT condition. Model# PL-16S Serial# 8308017 Features: 6-Station Turret. Lever Collet Closer. Hardinge Taper Lock Spindle Mount. Coolant System. Infinitely Variable Spindle Speeds. specifications: Capacities: Swing Over Bed: 9" Maximum Distance Between Centers: 18" Spindle: Taper: Hardinge Taper Lock Collet Type: 5C Speeds: 230 to 3.500 rpm Motor: 2/1 Horsepower. Turret: Number of Stations: 6 Tool Shank Capacity: 5/8" Slide Travel: 3-1/4" Bed: Bed Width; 3-3/8" Bed Length: 30" General: Electrical: 220 Volt. Three Phase, 60 Hz Overall Dimensions: 65" x 29" x 60" tall. Comes as shown in pictures.
HARDINGE 1/2" SECOND OPERATION LATHE EXTENSION TOOL HOLDER - #C17
Made in the U.S.A. by Hardinge Brothers of Elmira. NY. This is a Second Operation Lathe Extension Tool Holder in good condition. SPECIFICATIONS: Capacity: 1/2" Overall Dimensions: 5-3/4" x 2" x 2-1/4" high Comes exactly as shown in pictures.
Boyar Shultz Box Turning Tool 00RT Turret Lathe 5/8" Shank Hardinge
Boyar Shultz 00RT 5/8" Shank box tool used primarily for Hardinge Turret lathes. Or the similar. Both rollers spin freely. Could use a better screw for securing the lathe bit, and one of the rollers is slightly worn. Overall nice condition. Compare to Hardinge or Brown and Sharp Box tools.
Trav A Dial 7A with Lathe Bracket Hardinge Good Condition
Bought this Trav a Dial to use on on of my machines. And ended up not needing it for the job, overall very good condition. The indicating wheel is in excellent shape with no signs of wear, and the glass lens has no scratches on it. Needs felt wiper before installing. Shipping will be USPS Priority, thanks for bidding!
HARDINGE 3 Jaw Lathe Chuck DV-59 VG weighs 10 lbs
I am listing 2 different Hardinge DV-59 chucks today. One is 3 jaw and one is 4 jaw. Happy to combine shipping if you win both. I will insure the shipment. This is the 3 jaw. Works well. Weighs 10 pounds.
Milling machine lathe Center finder Bore scope Atlas Logan South Bend Hardinge
Nice tool works fine extremely accurate. USA Made. Clear view down scope. 1/2" Shank smooth and clean. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14756c16b43-0x111-
Very Nice Machinist 10" Lathe TAILSTOCK Hardinge ? South Bend ?
I will be listing a very nice variety of large Machinist/ Metal Working DRILL BITS. END MILLS, COLLETS, TOOL HOLDERS, etc. over the next few weeks so please see my other listings. All items are used but in good, useable condition. Tools are all very clean, have normal scratches and wear(no rust) some may need sharpening but overall a great selection of high quality Tools! Any variance to that condition will be noted in the listing under Comments. For your bidding consideration in this Auction is the following item(s) LOT# 36 ITEM(S) Lathe Tailstock. Does not have a manufacturer name on it but may be a Hadinge( or South Bend? I am not sure so please do your own research but does resemble some of the Hardinge and South Bend I have seen. It is adjustable as shown in the photos and moves smoothly and easily as intended. Does have the number"10" ... more3-9453-SCR" Here are some Measurements: LENGTH: 9 1/2" long overall as shown in the photo. WIDTH: The base is 4 1/2" wide& 7 3/4" long. COMMENTS: It appears in good condition. Ask questions before bidding and I will do my best to answer, comes with everything shown in photos. Shipping weight estimate is 13 lbs. SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have provided a few thoughts below to help you understand my practices and what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should pay for your items within 4 days of the Auction close. I use Ebay's system for payment reminder and notification. LISTING/ ITEM DESCRIPTION: Please ask questions- I try and describe items as best I can. And add corresponding Photos, but I don't always kno
hardinge tool post modle #C3 lathe mill machine tool tooling
HARDINGE TOOL POST MODLE C-3 good condition We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-147584c6e95-0x110-
Hardinge Cataract Bench Lathe COMPOUND T BOLT Machinist Clockmaker
Hardinge Cataract Bench Lathe THROUGH BED ATTACHMENT BOLT Machinist Clockmaker 3-1/2" center height This item is in original undoctored condition- T-Bolt for tool rests and compound cross slide appears to be in very good condition with good threads not sloppy or worn Good period original equipment with the correct hardware and patina. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent or good condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
Hardinge Cataract Bench Lathe TAIL STOCK 7" swing Machinist Watchmaker
Hardinge Cataract Bench Lathe TAIL STOCK This item is in original undoctored condition- From 3-1/2" center height cataract Quill runs and clamps without play and screw feed works well small taper original and complete Needs cleaning and restoration. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent or good condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.