|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$24.95 Shipping Condition: Used Location: Yakima, United States FLEX-E-ON FX-835 16c Including Hardinge 16C Collett. We Have Multiple Units Of This Available. Just Ask If You Need Any More!
Buy It Now
$14.00 Shipping Condition: Used Location: Bristol, United States USED 1 AND 2" STEP
Buy It Now
Free Shipping Condition: Used Location: Rosedale, United States This is a mixed lot of several different collets and several different sizes. They are in good used condition. One of the step collets has a chip in the ... moreside. Manufacturer: Hardinge. Location: 13B.
Buy It Now
Condition: Used Location: Middlebury, United States Removed From A Hardinge AHC Super Precision Automatic Chucker. Model: AHC Super Precision. Unless otherwise specifically agreed to in writing by. Size: ... moreLength: 40 in. Width: 10 in. Height: 10 in. Prefer to pick it up yourself?.
Buy It Now
$10.60 Shipping Condition: Used Location: Watsontown, United States This Tool Holder Riser Block is a great addition to your Hardinge DV-59 Lathe Model E Cross Slide Complete. It is compatible with Precision Lathes and ... moreis specifically designed for Hardinge brand. This item is perfect for those in the Metalworking industry and is ideal for those looking to upgrade their equipment. The Tool Holder Riser Block is durable and made with high-quality materials to ensure long-lasting use. It is perfect for those looking to increase their lathe's capabilities and is easy to install. This product is a must-have for anyone looking to improve their metalworking equipment.
Buy It Now
$9.99 Shipping Condition: Used Location: Sicklerville, United States
Buy It Now
$20.00 Shipping Condition: Used Location: Bristol, United States Check out my other listings as well. Thank you for looking
Buy It Now
$6.00 Shipping Condition: Used Location: Kings Mountain, United States Feeler Model FTL-618E Precision lathe, Hardinge HLV-H copy, machine is in good to excellent condition, motorized cross slide, collet.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Hardinge Lathe HSL 59, DV-59 & DSM-59. I don’t know very much about these lathes. This part is from a DV59 as far as I can tell and from what I understand ... morethe other lathes share the same parts.
Buy It Now
$7.85 Shipping Condition: New – Open box Location: Brooklyn, United States Lathe or hardware not included. I have tested this on several lathes and they do fit. Product images are for display purpose only, item may vary.
Buy It Now
$21.00 Shipping Condition: Used Location: Cedar, United States THIS IS A LEVER TAILSTOCK FOR FRILLING ON A HARDINGE DV-59 IN REAL GOOD CONDITION. I DO HAVE STANDARD& 6 POSITION TURRET TAIL STOCKS AND OTHER HARDINGE ... moreATTACHMENTS AND TOOLING,SEE MY OTHER LISTING FOR HARDINGE SPEED LATHES,HLV-H TOOLROOM LATHE AND DV-59 APPROXIMATE SHIPPING WEIGHT:`33 LBS. 14 X 8 X 12 WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Dec-22-11 at 09:55:08 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
$10.95 Shipping Condition: Used Location: Clearwater, United States USED - Hardinge AHC-21 toolholders with screws. Sold as shown in the attached pictures. These items are used and have visible signs of wear and tear as ... moreshown in the pictures.
Buy It Now
$15.00 Shipping Condition: Used Location: Cedar, United States HARDINGE HLV-H HALF NUTS. AND PARTS AS SHOWN.
Buy It Now
$6.00 Shipping Condition: Used Location: Lombard, United States Hardinge Lathe D-5 Wedge Tool Post Holder. It is used and has nicks and scratches and etchings but is in good condition overall. Missing the wedge. Please ... morelook at pictures in detail and ask questions before bidding.
Buy It Now
Free Shipping Condition: Used Location: Rosedale, United States This is a mixed lot of several different collets and several different sizes. They are in good used condition. Location: 55D. The sale of this item may ... morebe subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$12.00 Shipping Condition: Used Location: Whittier, United States Made in the U.S.A. by Hardinge. This is a lightly used Fine / Micro Adjust Lathe Tool Holder in EXCELLENT condition. Bit Capacity: 1/2".
Buy It Now
$475.00 Shipping Condition: Used Location: Bristol, United States
Buy It Now
$5.40 Shipping Condition: Used Location: Watsontown, United States This Hardinge No. 00-D tool holder is perfect for use with a turret lathe and features a 5/8" shank. It is designed to securely hold and position tooling ... morefor precision metalworking. The tool holder is made by the reputable brand Hardinge and is a great addition to any metalworking equipment collection. It is compatible with various models and is well-suited for use in a variety of industrial settings.The tool holder is used, but remains in excellent working condition. Its sturdy construction ensures durability and long-lasting use. It has been carefully inspected and has no visible damage or defects. This Hardinge No. 00-D tool holder is a reliable and high-quality option for any metalworking professional.
Buy It Now
Condition: Used Location: Leander, United States (1) Hardinge DSM-59 Dove-Tail-Bed 6-Position Precision Turret Lathe. Manufacturer: Hardinge. Notes:When power was applied, this item ran very smoothly. ... moreIt was not tested under a load, though the forward/reverse and variable speeds ran great.
Buy It Now
$11.60 Shipping Condition: Used Location: North Tonawanda, United States Hardinge Lathe HSL 59, DV-59 & DSM-59. I don’t know very much about these lathes. This part is from a DV59 as far as I can tell and from what I understand ... morethe other lathes share the same parts. The screw are in bad shape. There is some pitting and rust but I don’t believe it will effect the function of it
Buy It Now
Condition: Used Location: Graytown, United States Overall, it looks to be in very nice shape. it was hooked up for 220 three phase and was being used. The rear turret handle had a part welded on that ... moreallowed them to have a little extra leverage. Other than that this machine is perfect.
Buy It Now
$18.40 Shipping Condition: Used Location: Watsontown, United States This Hardinge 5" Lathe Chuck with a threaded mount is a reliable addition to your metalworking equipment. The 3-jaw chuck is suitable for use on a Hardinge ... more30AHC lathe and has a chuck size of 5 inches. The manual control allows for precision and accuracy in your metalworking projects. Constructed in the United States, this Hardinge Lathe Chuck is designed to handle tough industrial demands and provide lasting performance. The brand is well-known for its high-quality metalworking equipment and this chuck is no exception. Purchase includes a key for easy installation and usage.
Buy It Now
$12.78 Shipping Condition: Used Location: Millstadt, United States This item is in decent used condition. This item may be missing parts. Inventory- Box I3.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States Hardinge Lathe HSL 59, DV-59 & DSM-59. I don’t know very much about these lathes. This part is from a DV59 as far as I can tell and from what I understand ... morethe other lathes share the same parts.
Buy It Now
Condition: Used Location: Covina, United States Hardinge HC Hand Chucker Machine Shop Lathe W/ Tons Of Collets And Tooling.
Buy It Now
$40.00 Shipping Condition: Used Location: Charlottesville, United States Parts/Repair: The slot alignment pin has been replaced by a ground down socket head cap screw. It works fine. But requires some analysis to get the ram ... moreback in once it comes out(the screw has a blade, rather than just a pin) The clamping screw is missing. The crank shaft bushings could stand some tightening to reduce backlash. But it's completely usable. Other than that. It seems to work fine. Turns smoothly. Measurement: see pic 2. It measures about 4.7" sitting on a flat surface. But in use it sits a bit lower on a bed. Seems to be shorter than what is needed for 9" I don't know which lathe this fits. Although it appears to be one of the early Hardinge family of brands. Split bed: Reverse dovetail. With a clamping slot down the center. MT1 hole. Weighs over 15 lb. Consistent with the expected quality. That does mean though that it has to ship in a medium FRB. Sorry: we cannot ship internationally.
Buy It Now
Free Shipping Condition: Used Location: Waterbury, United States Up for bid are these Hardinge C4 Lathe cutting tool holders 3 Pcs w/ tooling. Items are in good shape
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States I believe it’s a DV59. The bearings are in good shape. ( depends on your device ).
Buy It Now
Free Shipping Condition: Used Location: Valencia, United States Is a machine tool and parts dealer located in Southern California. These parts have been dismantled by our own employees from machines at our facility. ... moreHARDINGE COBRA 42 LC PALLET 231230 NONE. ARPI MACHINE SALES INC.
Buy It Now
$25.61 Shipping Condition: New – Open box Location: Old Saybrook, United States Hardinge Power Supply BP 31942930.
Buy It Now
$15.55 Shipping Condition: Used Location: Wilmette, United States This is a good condition and clean tool holder. A nice item.
Buy It Now
$15.55 Shipping Condition: Used Location: Wilmette, United States This is a good condition and clean tool holder. A nice item.
Buy It Now
Free Shipping Condition: Used Location: Rockton, United States Hardinge lathe motor drive pulley shaft removed from a Hardinge split bed. Free shipping.
Buy It Now
$149.72 Shipping Condition: Used Location: Dekalb, United States Hardinge lathe universal grinder workhead. Includes belt lock for workhead. a6 external mount, 5c internal mount for collet drawbar. uses cup chucks (not ... moreincluded). See pictures above for an example.
Buy It Now
$12.00 Shipping Condition: Used Location: Bristol, United States One post has a 1/2” tool opening, with 1 3/8” keyway. Other has 7/16” tool opening with 1 1/8” keyway base. The few Toolholders shown are 3/8”. Check ... moreout my other listings as well. Thank you for looking
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States Hardinge Lathe HSL 59, DV-59 & DSM-59. I don’t know very much about these lathes. This part is from a DV59 as far as I can tell and from what I understand ... morethe other lathes share the same parts.
Buy It Now
$10.60 Shipping Condition: Used Location: National City, United States 4 Position Turret Carriage Stop Hardinge Metal Lathe ? Good condition. Thanks for looking.
Buy It Now
Free Shipping Condition: Used Location: Lakeland, United States THIS LATHE HAS ONLY 20 HOURS OF USE! Hardinge HLVH Lathe Specifications: Variable spindle speeds: 125- 3.000 RPM Swing over bed: 11" Cross slide: ... more6" Carriage: 9" Distance between centers: 18" Hole through spindle: 1.25" Compound slide travel: 3" Carriage power feed range: 5/16" 7 IPM Cross slide power feed range: 3/16" 4 IPM Tailstock spindle travel: 3.75" Tailstock spindle taper: No. 2 MT Number& range of threads(inch) 36) 11- 108 TPI Estimated weight: 1.700 lbs. Motor: with variable speed drive unit with direct reading spindle speed indicator& controls Hardinge super precision ball bearing spindle Hardinge tapered spindle nose Hardened and ground dovetail bed Independent variable power feed drive for carriage and cross slide Quick change gear box Lead screw threading Auxiliary gear box with automatic stop Taper attachment Full bearing compound carriage and cross slide Quick acting tool post slide Tailstock Lever operated collet chuck MD coolant.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14305cc26ff-0x101-
Buy It Now
$8.60 Shipping Condition: Used Location: Littleton, United States Hardinge 5C G9 Dead Center, pre-owned, in good condition. See photos. We combine shipping on simultaneous orders. Free returns.
Buy It Now
$9.95 Shipping Condition: Used Location: Poughkeepsie, United States You will receive the exact item(s) shown in the pictures. I usually put a ruler in the pictures for size reference. If I see any defects I will show them ... more(any defects missed are accidental).
Buy It Now
Condition: Used Location: Rochester, United States Make: Hardinge. Electric: 230V, 60 Hz, 3 Phase. Type: Super Precision Lathe. Lathe HP: 1. Includes all tooling pictured. Installed Gusher 8P3 Coolant ... morePump. Machine FLA: 5.6.
Buy It Now
Condition: New Location: Chatsworth, United States Similar to the Hardinge HLV toolroom lathe. Made in Taiwan. 11"x18" Manual Toolroom Lathe. Specifications as adverti zed by manufacturer. 3- Horsepower ... moreElectronic Variable-Speed Inverter Motor. Ask for Jerad.
Buy It Now
$32.42 Shipping Condition: Used Location: North Tonawanda, United States There is no pitting. Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for ... moreyour business no matter how big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$15.45 Shipping Condition: Used Location: Canoga Park, United States This is a kit to repair your top slide. It comes with: A drill bushing. A#3 center drill. The drill for a 1/2 acme tap. A 1/2 LH acme tap. A new brass ... morenut that you put in place and the tap. Instructions from 1961. All of the tools are extended so they fit in a bushing and reach the nut once installed. This allows you to use a hand drill to cut the slide nut once it is in place for optimal accuracy. It is all in good condition but it has been used once. It looks like the hand drill spun on the shaft of the drill bit but its not bad. I am tempted to frame the instructions and hang them in my shop but you may need them.
Buy It Now
$28.90 Shipping Condition: Used Location: Bensenville, United States Cleaning out my uncle shop ex Grumman employed/ job shop. Used to build all the naval jets. We sold the lathe 3 years ago and just found a huge greasey ... morebox of goodies. lots of hardinge tooling. I wish I had one. Sbl fan Anyway. Slides nice and would be a nice asset to any production shop. Any questions feel free to ask. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14bd6eeee0c-0x104-
Buy It Now
Condition: Used Location: Harrison, United States 11" Swing 18" Centers Hardinge HLV-EM Reconditioned 2023 PRECISION ENGINE LATHE, Bed&Cross Slide Reg. HARDINGE SUPER PRECISION TOOL ROOM LATHE. SPINDLE ... moreCONSTRUCTION. . HARDINGE BALL BEARING.
Buy It Now
$72.00 Shipping Condition: Used Location: Watsontown, United States HARDINGE: steady rest for the hardinge 5" solid bed lathes. excellant to new condition. used only 2 x.paid over $800.00. i am retiring. Downsizing. ... morethanks 4 looking RICK
Buy It Now
Free Shipping Condition: Used Location: Watsontown, United States This Hardinge 5" lathe chuck is a high-quality tool that will help you achieve precise machining results on your metalworking projects. The chuck features ... morea 3 jaw Tru Set Ultra Precision design that ensures a secure and accurate grip on your workpiece. Made in the United States, this chuck is built to last and withstand heavy use in industrial settings. Its manual control allows for easy adjustments to fit your specific needs. With a tapered mount, this chuck is compatible with a wide range of metalworking lathes. Get the precision and reliability you need for your metalworking projects with this Hardinge lathe chuck.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States I believe it’s a DV59. ( depends on your device ).
Buy It Now
Free Shipping Condition: Used Location: Watsontown, United States This listing features a set of two genuine Hardinge compound slide camlock bolts, perfect for use with metalworking lathes. These bolts are compatible ... morewith a variety of brands, but specifically designed for use with Hardinge lathes.Crafted with high-quality materials, these camlock bolts are built to last and provide a secure locking mechanism for your compound slide. Whether you are a professional metalworker or a hobbyist, these bolts will make a great addition to your collection. Don't miss out on this opportunity to enhance your lathe's performance!
Buy It Now
$100.00 Shipping Condition: Used Location: Naperville, United States USED - VERY GOOD WORKING CONDITION.
Buy It Now
$8.85 Shipping Condition: New – Open box Location: Brooklyn, United States HLV-H, TFB, HC Variable Speed Motor Plate. Lathe or hardware not included. Product images are for display purpose only, item may vary.
Buy It Now
$22.55 Shipping Condition: Used Location: Cedar, United States
Buy It Now
Condition: Used Location: Waukesha, United States MAKE.. HARDINGE. LIVE MILLING. MODEL. CONQUEST T-51 (CS-51). SUB SPINDLE. SPINDLE SPEED.. SPINDLE THRU HOLE. SWING DIA OVER WAYS COVERS. 26".
Buy It Now
$90.60 Shipping Condition: Used Location: Sparta, United States Hardinge precision lathe, drilling lathe 12" swing, 3phase, 2hp, enco drilling tailstock This is a good running, working condition lathe Shipping and ... moreor transportation available. Ask for shipping quote
Buy It Now
Free Shipping Condition: New Location: Franklin, United States
Buy It Now
Condition: Used Location: Cincinnati, United States Swing Over Bed 9". Top Slide, Travel 4-1/4". Bottom Slide, Travel 5". Updated Allen Bradley Variable Speed Drive w/Electrics. Spindle Capacity, Round ... more5C Collets 1-1/16". Motor, Horsepower 1 HP. 5" 3-Jaw Chuck.
Buy It Now
$18.40 Shipping Condition: Used Location: Watsontown, United States This Hardinge 5" lathe chuck, model 30AHC, is a reliable and efficient tool for any metalworking project. With a 3 jaw design and a taper mount, it securely ... moreholds your workpiece for precise machining. Made in the United States, this chuck is of excellent quality and built to last.The chuck size is 5 inches, and the machine type is a lathe. The manual control allows for hands-on precision in your work. The brand is Hardinge, a trusted name in the industry. This chuck comes with a key and is ready for use. It is a great addition to any metalworking equipment collection.
Buy It Now
$19.99 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
Free Shipping Condition: Used Location: Valencia, United States THIS PART WAS REMOVED FROM A HARDINGE CHNC1 CNC LATHE. HARDINGE CHNC1 PALLET 231206. is a machine tool and parts dealer located in Southern California. ... moreThese parts have been dismantled by our own employees from machines at our facility.
|
|
|
|
HARDINGE TBA-5/8 SLIDE TOOL For Lathe- EXCELLENT USED COND!
Hardinge TBA 5/8 slide tool for lathe Excellent condition Lowest price on eBay! Will combine shipping Posted with
|
|
|
TURRET LATHE SLIDE TOOL 1" SHANK LOGAN HARDINGE WARNER SWASEY
SLIDE TOOL FOR TURRET LATHE OR AUTOMATIC. 1" sHANK AND 2 BORES FOR 1/2" sHANK TOOLS. PLEASE NOT CAST IRON HANDLE WHICH HAS BEEN BROKEN. MOVES FREELY. Please feel free to contact me with any questions. Shipping: Shipping is quoted using USPS Parcel Post for the most economical option for items that do not fit in flat rate boxes. Handling time is 4 days. If for some reason it takes me longer. You will recieve communication explaining any delays. Shipping cost is calculated automatically by Ebay with a handling fee of 1.00 per item to cover expenses such as packaging material. Boxes, etc. Combined shipping is available for your savings! Payment: Payment is expected within 48 hours of auction close. If this is a problem. Please notify me ahead of time. Please view my on eBay. Powered by
|
|
|
HARDINGE 9" SUPER PRECISION OMNITURN CNC SECOND OP LATHE - #DSM-59
aims HARDINGE 9" SUPER PRECISION OMNITURN CNC SECOND OP LATHE- DSM-59 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge Brothers. Inc. of Elmira, N.Y. This is a used Super Precision High Speed Omniturn CNC Second Op Lathe. The control and servos work fine on this unit. When we powered up this unit the machine homes out correctly and works fine in most instances. There is a missing contactor. Which we believe to be the problem with the spindle not starting correctly. All servos power up and work fine. This is an overall great machine, but the only issue is the spindle does not seem to want to power up. This should be an easy fix for someone with the time and knowledge. Model# DSM-59 Serial# DV-59-15355 Features: Omniturn#OT-CNC 2-Axis CNC System. RS-232 ... morePort. Floppy Drive. Pneumatic Collet Closer. Hardinge Dovetail Bed/ Hardened and Ground. 1 Horsepower Motor. Built-In Coolant Facilities with Gusher Pump. Specifications: Capacity: Swing Over Bed: 9" Spindle: Spindle Mount: Hardinge Spindle Bore: 1-1/8" Spindle Speeds: 230 to 3.500 rpm. Spindle Capacity: Round 5C Collets: 1-1/16" Hexagon 5C Collets: 7/8" Square 5C Collets: 3/4" Step Chucks: 1-1/16" to 6" Jaw Chucks: 5" Jaw Chucks(thru spindle) 1-5/32" Bed: Bed Width: 3-3/8" Bed Length: 30-3/8" General: Motor: 1 Horsepower Electrical: 440 Volt. Three Phase Overall Dimensions: 67" x 33" x 75" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HARDINGE 9" SUPER PRECISION OMNITURN CNC SECOND OP LATHE- DSM-59 HARDINGE 9" SUPER PRECISION OMNITURN CNC SECOND OP LATHE- DSM-59 HARDINGE 9" SUPER PRECISION
|
|
|
HARDINGE TYPE TURRET LATHE 3/8" SQUARE TOOL HOLDER
UP FOR SALE IS THIS HARDINGE TYPE TURRET LATHE 3/8" SQUARE TOOL HOLDER. THIS IS A USED HARDINGE TYPE 3/8" SQUARE TOOL HOLDER FOR TURRET LATHE. THERE HAS BEEN SOME CLEARANCE GRINDING DONE ON ONE CORNER(SEE PHOTO) IN GOOD SHAPE. NEEDS CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK! NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ALASKA. HAWAII. CANADA OR ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. 2900
|
|
|
HARDINGE C9 TURRET LATHE 3/8" SQUARE TOOL HOLDER
UP FOR SALE IS THIS HARDINGE C9 TURRET LATHE 3/8" SQUARE TOOL HOLDER. THIS IS A USED HARDINGE C9 3/8" SQUARE TOOL HOLDER FOR TURRET LATHE. IN GOOD SHAPE. NEEDS CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK! NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ALASKA. HAWAII. CANADA OR ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. 2899 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f2557effe-0x100-
|
|
|
HARDINGE 5C SERRATED COLLETS, HARDINGE, LATHE, MILL, GRIND
HARDINGE 5C SERRATED COLLETS USED FOR BETTER GRIPPING SIZES AVAVAILABLE: 1) 9/16" DIA. 1) 3/4" DIA, THESE HAVE BOTH EXTERNAL& INTERNAL THREADS(1) 1" DIA WITH EXTERNAL THREADS ONLY APPROXIMATE SHIPPING WEIGHT: 2 LBS YOU ARE BUYING ON(1) THERE ARE(3) AVAILABLE LET US KNOW WHICH ONE YOU WANT Sq WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE uareTra FOR ANY QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item ... moreis shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 45 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! See other items in our e-Bay store. Be sure to add me to your favorites list! On Nov-12-02 at 07:36:48 PST. Seller added the following information: After purchasing. Pay instantly with your credit card through PayPal! On Thu Aug 07 09:50:31 PDT 2003. Seller added the following information: 30 Day Return Policy for any reason. buyer pays return shipping charges. Damage goods. Call for shipping instruction. Please do not accept a package that l
|
|
|
PILE OF HARDINGE 11SC METAL LATHE GRINDER MACHINIST TOOLING
DESCRIPTION: USED. PILE OF HARDINGE 11SC COLLETS. THE SIZES ARE: 35/64; 33/64; 9/16; 21/64; 31/64; 17/32. THERE ARE SEVERAL DUPLICATES. THE AUCTION IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS ... moreAND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE P
|
|
|
HARDINGE C-10 #2 DOUBLE 3/8" TOOL HOLDER for TURRET LATHE
HARDINGE C10 DOUBLE TOOL HOLDER for TURRET LATHE/CHUCKER MODEL: C-10 DESCRIPTION: THE DOUBLE TOOL HOLDER IS MOUNTED DIRECTLY TO THE HC TURRET. SPECIFICATIONS: CAPACITY: 2) STANDARD 3/8" SQUARE TOOL BIT Pleaase note; this item is unmarked
|
|
|
HARDINGE C-9 SINGLE 3/8" TOOL HOLDER for TURRET LATHE
HARDINGE C9 SINGLE TOOL HOLDER for TURRET LATHE/CHUCKER MODEL: C-9 DESCRIPTION: THE SINGLE TOOL HOLDER IS MOUNTED DIRECTLY TO THE HC TURRET. SPECIFICATIONS: CAPACITY: 1) STANDARD 3/8" SQUARE TOOL BIT Pleaase note; this item is unmarked jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f27103365-0xf6-
|
|
|
HARDINGE TB 3/4 STA001121201 BORING BAR HOLDER - LATHE TOOL
USED HARDINGE TB 3/4 SLIDE TOOL MODEL: TB 3/4 SPECIFICATIONS: SHANK: 3/4" HARDINGE DESCRIPTION THE SLIDE TOOL IS USED TO PERFORM TURNING OR BORING OPERATIONS. IT MOUNTS INTO THE TURRET OR A ROUND SHANK TOOL HOLDER. THE TOOL HOLDER IS ADJUSTABLE FOR CHANGING A BORE OR TURN DIAMETER USING THE TEE HANDLE WHICH CONTROLS A FINE PITCH THREAD. IT HAS A DIAL THAT IS GRADUATED IN.001" 03 MM) INCREMENTS MAKING A DIAMETER ADJUSTMENT OF.002" 05 MM) PER GRADUATION. THE SLIDE HAS AN OVERALL TRAVEL OF 7/8" 22.23 MM) AND HOLDS 5/8" DIAMETER SHANK TOOLS. Please note the shank can be removed and replaced with a 5/8" shank(Available from Hardinge) making this a TBA 5/8. Please feel free to ask questions before bidding. Retail on this is $1520.00 so get it here at a great price. Also note. The TB 3/4 is rare and hard to find.
|
|
|
No. 2 SJOGREN SPEED CHUCK & 2J COLLET SET engine lathe 2 j tool HARDINGE USA
good used 5C collet- speed chuck Sjogren No 2 Hardinge Bros USA 1/8. 5/32, 3/16, 3/16sq, 1/4, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 and 7/8" Hardinge 2J collets aluminum hand grip has wear and is chipped but it turns smooth add your own back plate please check my other auctions and happy bidding! will ship for $16.85 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
HARDINGE 5-INCH 4 JAW LATHE CHUCK 36-HCX
HARDINGE 5-INCH 4 JAW LATHE CHUCK 36-HCX HARDINGE 5-INCH 4 JAW LATHE CHUCK 36-HCX PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
HARDINGE 5-INCH 3 JAW LATHE CHUCK 30A-HCX
HARDINGE 5-INCH 3 JAW LATHE CHUCK 30A-HCX HARDINGE 5-INCH 3 JAW LATHE CHUCK 30A-HCX PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
SOUTH BEND,HARDINGE, LATHE 4-JAW CHUCK,1 1/2inX8tpi MOUNT, 8in CHUCK, NICE SHAPE
LISTING IS FOR A 4 JAW CHUCK THAT HAS A 1 1/2in X 8tpi THREADED MOUNT. THIS THREAD IS USED ON THE NOSE OF VARIOUS ATLAS AND SOUTH BEND LATHES ALONG WITH OTHERS MANUFACTURED IN THAT ERA. THIS LATHE CHUCK IS VERY HEAVY DUTY AND WEIGHS ABOUT 25lbs OR MORE. WOULD BE BEST SUITED ON A LARGER LATHE LIKE A SOUTH BEND OR A HARDINGE. BUT DOES HAVE A 1 1/2 X 8 tpi THREADED ADAPTER. THIS IS AN INDEPENDENT ADJUSTABLE JAW CHUCK. ALL JAWS SCROLL INDEPENDENTLY. CHUCK IS IN GOOD OVERALL SHAPE OTHER THAN SOME SURFACE RUST. THANKS FOR LOOKING AND PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f2be4004a-0xf4-
|
|
|
Hardinge Cataract Lathe and Accessories
Up for Auction is a Hardingen Cataract Bench Lathe. It has the original motor.110 Volt single phase) a motor stand, Belt and a starter switch. Included accessories include Turret Tail Stock with lacobs chucks, center drill, stops, collet head and several drill mounts.Also include is a compound with tool holder and a cutoof slide. Pick up available.
|
|
|
HARDINGE 3-JAW 6" LATHE CHUCK W/ 2 3/16"-10 THREAD MOUNT
aims HARDINGE 3-JAW 6" LATHE CHUCK W/ 2 3/16"10 THREAD MOUNT read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Hardinge. This is a 3-Jaw Lathe Chuck in Good condition. Serial# 06856 Specifications: Unit has 3 two pieces jaws. Unit is 6" in diameter. Unit is 2 3/8" thick. Unit has a 1-7/8" thru hole. Unit has a 2 3/16"10 Threaded mount. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HARDINGE 3-JAW 6" LATHE CHUCK W/ 2 3/16"10 THREAD MOUNT HARDINGE 3-JAW 6" LATHE CHUCK W/ 2 3/16"10 ... moreTHREAD MOUNT Reliable Tool Inc. c 2011 | Powered by
|
|
|
Hardinge Conquest T51 T51SP T65 Live Tool Holder CL50, collet chuck CNC Lathe 42
H ardinge CL-50 Cross-Working Live/Revolving Tool Holder in great shape and spins freely. Often used on a Hardinge Conquest T51/T51SP or a T65 and others. Accepts a 180 Series double-angle collet(example: SG-180& SB-180 and others) Equipped with an end-cap to protect gear. 3000 RPM; 2.4 HP I have other Hardinge live tool holders[and static] available as well. If you have any questions please cal us a 262-895-3462 or email us at sales@mwmachinery.com Thanks for looking and be sure to visit our Ebay store for all of your metalworking solutions. Bid With Confidence! Check out my other Auctions by clicking View seller's other items l ink above. Or visit my e B a y Store! Our Web Site is displayed within our About m e Page above in the" Seller info" area above.
|
|
|
HARDINGE AHC-18 BORING TOOL HOLDER FOR SECOND OP LATHE
aims HARDINGE AHC-18 BORING TOOL HOLDER FOR SECOND OP LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge Bros. This is a Boring Tool Holder for a Second Op Lathe in good condition. Model# AHC-18 Specifications: Capacity: 5/8" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HARDINGE AHC-18 BORING TOOL HOLDER FOR SECOND OP LATHE HARDINGE AHC-18 BORING TOOL HOLDER FOR SECOND OP LATHE HARDINGE AHC-18 BORING TOOL HOLDER FOR SECOND OP LATHE Reliable Tool Inc. ... morec 2011 | Powered by c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f30116abe-0xf3-
|
|
|
Early Hardinge/Elgin/Cataract tailstock for split bed lathe
Parts/Repair: The slot alignment pin has been replaced by a ground down socket head cap screw. It works fine. But requires some analysis to get the ram back in once it comes out(the screw has a blade, rather than just a pin) The clamping screw is missing. The crank shaft bushings could stand some tightening to reduce backlash. But it's completely usable. Other than that. It seems to work fine. Turns smoothly. Measurement: see pic 2. It measures about 4.7" sitting on a flat surface. But in use it sits a bit lower on a bed. Seems to be shorter than what is needed for 9" I don't know which lathe this fits. Although it appears to be one of the early Hardinge family of brands. Split bed: Reverse dovetail. With a clamping slot down the center. MT1 hole. Weighs over 15 lb. Consistent with the expected quality. That does mean though ... morethat it has to ship in a medium FRB. Sorry: we cannot ship internationally.
|
|
|
HARDINGE HC TURRET LATHE
Hi I'm selling this Hardinge Chucker as is non working. It need some loving care and it can run again. I haven't used it for a long time, I need the space and don't need it for my applications anymore. The motor and spindle turn the carriage indexes and the feed motors worked. It needs a new headstock belt topside and there is a problem with the variable speed controller and maybe some other work. This machine is as is where is. I'll include the tool holders that are on the machine. There are no collets being sold with the machine. It needs a good cleaning and there is some surface rust to. If you need more pictures I'll e-mail them to you. If you have any questions please e-mail me before you bid. You are(the buyer) are in charge of all rigging and trucking expenses and arranging. I can load it on the trailer for $100.00. ... moreLocal pickup is available.
|
|
|
Dv59 Precision Hardinge Manual Lathe
tooling73@yahoo.com
|
|
|
CHNC Hardinge CNC Lathe Model CHNC 16C
This is a Used Hardinge CHNC 16C Model CNC Lathe Non Working. For Parts. This would make a great retrofit project. Does not have the original control, or motors, or spindle motor, they were removed. Machine sold" As Is Where Is" Any questions please call Jerry Kohler 503-998-0985 Shipping Shipping is the responsibility of the buyer; however. We have a network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Payment Wire Transfers and Direct Deposits. Are the preferred method of payment for purchases over $5.000.00, but can be made on any amount. Please contact jerry@cncbyamr.com for Wire instructions. Cashiers Checks and Money Orders. For Purchases ... moreover $1.000.00 are to be sent overnight, via priority mail, FedEx or UPS and tracking number confirmation emailed to: jerry@cncbyamr.com Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. And a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment.
|
|
|
◥◣HARDINGE 400 A2-6 EXPANDING COLLET ASSEMBLY LATHE◢◤
Hardinge Expanding Collet Assembly Hardinge Expanding Collet Assembly Model: 400 A2-6 Locating Stop Draw Plug No Collets Excellent Condition- new Validus Group catalog SKU# WH1143 Photograph shows Actual item for sale Everything we sell is in our warehouse Questions Call: 260-723-4946
|
|
|
Hardinge DSM-A Lathe automatic
Hardinge DSM A Automatic lathe This lathe just came in it was running the owner purchased another CNC lathe so we are selling this. These machines are great especially if you are running the same parts. Thank you for your Business! Yes we can ship! God Bless!
|
|
|
Lathe 3 jaw Hard Outside Jaws, metric Hardinge Pratt Schaublin 4, 5 in chuck?
Hard outside jaws. They look unused, stamped 1128. They are not the jaws in the photo. It is to demonstrate the following dimension s. width 0.553. 14mm pitch 6mm gap 0.278. 7.07mm step 0.512. 13mm approx(sorry there is an error. The dimension on the drawing should be marked to the other edge of the"gap" than the one that is marked for this measurement) length 1.361. 34. 5 mm I have various other jaws of a very similar size available. Please see my other listings if these are not quite right. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f434772a3-0xfa-
|
|
|
1997 Hardinge Conquest T42 CNC Lathe Turning Center, Live Tooling, Chip Conveyor
FOR SALE: Hardinge Conquest T42 CNC Lathe Turning Center with Live Tooling Model#SGSS-42 Specifications: DATE OF MANUFACTURE 1997 MAXIMUM SWING 21.2" MAXIMUM TURNING DIAMETER 9" MAX. DISTANCE BETWEEN SPINDLES 13.1" X AXIS TRAVEL 5.31" Z AXIS TRAVEL(W/COLLET) 13.9" C AXIS MINIMUM INCREMENT 0.001º B AXIS TRAVEL(SUB SPINDLE) 11.5" RAPID TRAVERSE RATE X AXIS 472 IPM RAPID TRAVERSE RATE Z AXIS 630 IPM RAPID TRAVERSE RATE B AXIS 300 IPM SPINDLE NOSE(MAIN& SUB SPINDLE) A2-5 MAX. BAR CAPACITY 1.625" SPINDLE SPEEDS(MAIN SPINDLE) 50- 5.000 RPM SPINDLE SPEEDS(SUB SPINDLE) 80- 6.000 RPM SPINDLE MOTOR(MAIN/ SUB SPINDLE) 10HP/ 5 HP TURRET CAPACITY 12 STATIONS LIVE TOOLING SPEEDS 4.000 RPM LIVE TOOLING MOTOR 2.4 HP APPROX. DIMENSIONS(INCL CHIP) 125" x 70" x 67" MACHINE WEIGHT(APPROX) 10.000 LBS ... moreEquipped With: GE FANUC 18T CNC CONTROL Contact: biomedtool@yahoo.com Purchasing Information: Payment must clear prior to shipment or pick up Payment methods include wire transfer. Certified check, personal/business check and paypal Warranty: Machine is in good working order and tested Freight and Shipping: Shipping/Trucking charge is not included in the machine price We coordinate shipping for you with professional trucking companies About Us and Our Mission: We are a consortium of three divisions selling biomedical. Scientific and cutting equipment. We have hundreds of pieces of equipment available for sale. We have decided to start listing on EBAY. We make sure to have the equipment tested prior to listing them. You will be buying from a company that has partners in Pediatrics. Cardio, Veterinary Medicine, Scientific Research, Bio-Chemistry, Tooling, Cutting Companies, etc. Please feel free to message us at: biomedtool@yahoo.com;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f43aee3e4-0xff-
|
|
|
HARDINGE C15 EXTENSION TOOL HOLDER FOR TURRET LATHE SIMILAR TO CC-15
HARDINGE C15 EXTENSION TOOL HOLDER FOR TURRET LATHE CL-15 IS THE OLDER VERSION OF THE CC-15. CL-15 DOES'T HAVE THE WEDGE INSERT FOR ADJUSTING HEIGHT. ADJUSTMENT IS MADE WITH SHIMS. DESCRIPTION: THE EXTENSION TOOL HOLDER IS GENERALLY USED FOR TURNING OPERATIONS. BUT CAN ALSO BE USED FOR HOLDING TOOLS TO BACK-FACE FLANGED WORK. OR TO CUT OFF. KNURL, GROOVE, OR THREAD A WORKPIECE. SPECIFICATIONS: THE HOLDER MOUNTS DIRECTLY INTO A T-SLOT OF A TURRET AND USES 3/8" OR 1/2" SQUARE SHANK TOOL BITS( NOT INCLUDED)
|
|
|
HARDINGE 5" 4 Jaw Chuck for Taper Mount, DV59 or similar Lathe - Excellent Cond!
HARDINGE 5" 4 Jaw Chuck for DV59 or similar Lathe Excellent Condition!
|
|
|
14 Lathe Collets 5C SBL Fowler Hardinge Germany
14 Lathe Collets 5C SBL Fowler Hardinge Germany Sizes are 3/32. 7/64, 1/8, 5/32, two 3/16, two 7/16, 1/2, three 3/4, two 15/16 and 1 extra piece. 4 SBL. 2 Hardinge, 2 Fowler, 2 marked Made in Germany and the rest are unmarked. Powered by The free listing tool. List your items fast and easy and manage your active items. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f4dfb4de9-0xf6-
|
|
|
Hardinge DV-59 turret lathe second operation lathe dv59 5c collets jacobs chuck
For sale is one used Hardinge DV-59 second operation Turret Lathe. This lathe is in good running condition. s/n- V59 3964-3. Specifications: Swing- 9" Bed Length- 28" Spindle speeds- 230- 3500 RPM Spindle nose- 5c collet Turret positions- 6 Weight- 1800 lbs. Main motor- 3/4HP- 220 volts. 3 phase, 60 cy. Equipped with: 5c Collet closer Standard cross slide Production cross slide(20) assorted Hardinge/Southbend 5c collets(2) No. 3A 1/8" to 5/8" cap. Jacobs drill chucks(1) No. 6A. 0 to 1/2" 4) dead centers(1) live center radius attachment Machine can be inspected under power. Sold as is. Will load free of charge on customers provided open top truck. Buyer responsible for freight charges. See terms. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal. Bank check, ... moreor company check. Must be made within 5 days after using the"Buy It Now" option on Ebay. If the item is not paid in full within. The 5 day period. The item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) Allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received in full. Texas residents will pay the applicable sales tax unless we(the seller) Are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within. The 30 day period by the buyer. We, the seller, will consider the unclaimed item forfeit by the buyer. And the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge. Unless otherwise noted in the item(auction) description herein. Crating/Boxing ch
|
|
|
Hardinge T42SP CNC Lathe with LNS Mini-Sprint Barfeed
Hardinge T42-SP with LNS Mini-Sprint Barfeed New 1995, Fanuc 18T Control, Parts Catcher, 1/4" through 1-5/8" Bar size, 16C Collet built into spindle, 5C Collet Adapter, 16C Extended Emergency Collet Adapter provides up to 3" capacity, Tailstock, Lots of tooling, UNDER POWER- Come and see.
|
|
|
NICE HARDINGE TT RELEASING TAP HOLDER & 4 TAP COLLETS LATHE TURRET TAPPING
HARDINGE TT TAPPING HEAD CURRENT MODEL# TT5/8 5/8" SHANK 4 TAP COLLETS.144" 0 THRU#6 TAPS) 168" 8, 255" 1/4" 323" 5/16" INCLUDES A SPARE TT TAPPER OUTER SHELL ONLY FOR PARTS. NO DAMAGE ALL IN EXCELLENT CONDITION FREE SHIP
|
|
|
HARDINGE HC (HC-CF) Chucking Machine Lathe
eBay Template 2011 HC-CF Chucking Machine Lathe I TEM S OLD A S P ICTURED Hardinge Chucking Machines are designed for high speed production work and built to the same fine standards of accuracy as Hardinge tool room lathes. Assuring rapid production of good parts at low cost. The preloaded ball bearing spindle is mounted in the solid, one-piece, totally enclosed headstock housing for maximum rigidity and sustained accuracy. Turret automatically indexes as the machine operator moves the turret locking-lever, meaning that with one motion, the turret is indexed to one station to reduce machine handling time. FEATURES Super-Precision Preloaded Ball Bearing Spindle, 11/16" Collet Capacity, Lever Collet Closer, Cross Slide Feed, Eight Station Cross-Feeding Turret with Adjustable Station, Independent Electrical Variable Power Feed for Turning. ... moreFacing, and Boring, Tool Storage Compartment with Collet Tray, Automatic Spindle Driveshaft Brake, Built-In Coolant Facilities, SPECIFICATIONS Spindle Capacity With Round 5C Hardinge Collets 1 1/ 16" With Hexagon 5C Hardinge Collets 7/ 8" With Square 5C Hardinge Collets ¾" With 5C Hardinge Step Chucks 1 1/ 16" to 6" With Jaw Chucks 6" With Jaw Chucks(Through Spindle) 1 5/ 32" Spindle Nose Diameter 2.189" Spindle Nose Thread 2 3/ 16" 10 R.H. Maximum Fixture Diameter 9" Maximum Diameter for Threading 6" External. 5" Internal Maximum Length for Threading 1¾" Maximum Distance from Face of Turret to Spindle 14" Travel of Cross Slide 4½" Cross Slide Power Feed Range 11/ 32" to 6¼" per min Carriage Power Feed Range ¼" to 10" per min Spindle Speed Range(Variable) 125- 3000 rpm Floor Space(base) 53" x 21" Machine Weight 1750 lbs*Specifications subject to verification CONDITION Ways are smooth. Spindle runs good. In good working condition. Please call for more details. 818) 718-6734 INSPECTION NOTES: As with any piece of equipment. New or used, this item wil
|
|
|
Hardinge High Speed Tool Room Lathe Operators Manual Model HLV-H
This auction is for a HARDINGE High Speed Precision Tool Room Lathe MODEL HLV-H Operator's Manual. This manual is in EXCELLENT Condition. This manual has awesome photos and instructions for use and hook up plus more. This is a must for anyone who has this lathe. PAYPAL ACCEPTED High bidder agrees to pay shipping charges. GOOD LUCK AND HAPPY BIDDING!
|
|
|
Metal Lathe Tool Post, Hardinge C6-8 Tool Post, Elmira, N.Y., U.S.A.
For your Consideration is this Hardinge C6-8 Tool Post. Hardinge, Elmira. N.Y. U.S.A. This tool is in good used working condition. Please see the picture and contact me if you have any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB15-4963 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
HARDINGE 5 Inch 4 Jaw Lathe Chuck Model L 36-HC Serial No. 82471
I am describing this the best I can. Please ask questions. Small amount of surface rust.
|
|
|
Hardinge 5" 3 Jaw Lathe Chuck- Amazing Excellent Condition!
Time for dad to downsize his tool collection! This was his personal chuck& was hardly ever used. In better than excellent condition. Had to mark it as used because it is. But very hardly used! Hardinge 5" 3 jaw chuck We have another set of jaws with the correct number for this chuck included. This is complete with 3 wrenches Great deal! Posted with
|
|
|
HARDINGE D5 WEDGE TYPE LATHE TURRET TOOL HOLDER
3 DAY AUCTION ONLY HARDINGE D5 WEDGE TYPE LATHE TURRET TOOL HOLDER Condition: used. Very Good ++ A nice quality Lathe tool. Shipping is only $5.80 anywhere in the USA. I have more Hardinge tool holders listed. Any Questions, Please ask before you bid. Free Tracking on all shipments. I do Combine Shipping. Keep me posted as I am listing many Machining/ Machinist/ Lathe tools and supplies. Thanks.
|
|
|
(2) HARDINGE LATHE D9 & D4 REAR WEDGE-TYPE TOOL HOLDER
3 DAY AUCTION ONLY(2) HARDINGE LATHE HOLDERS D9& D4 REAR WEDGE-TYPE TOOL HOLDER Condition: used. Very Good ++ A nice quality Lathe tool. Shipping is only $5.80 anywhere in the USA. I have more Hardinge tool holders listed. Any Questions, Please ask before you bid. Free Tracking on all shipments. I do Combine Shipping. Keep me posted as I am listing many Machining/ Machinist/ Lathe tools and supplies. Thanks.
|
|
|
Hardinge? Aloris? Boring Bar Tool Holder 1 1/8" Diameter Very Nice Lathe Tool
3 DAY AUCTION ONLY Hardinge? Aloris? not marked but similar to the two mentioned) Boring Bar Tool Holder 1 1/8" Boring Bar Diameter which can be adjusted with the set screws. A Very Nice Lathe Tool The square base piece is 1 1/8" x 1 1/8" square. Condition: used. Very Good ++ A nice heavy duty tool. I have Hardinge tool holders listed. Any Questions, Please ask before you bid. Free Tracking on all shipments. I do Combine Shipping. Keep me posted as I am listing many Machining/ Machinist/ Lathe tools and supplies. Thanks. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f6473b22b-0x102-
|
|
|
RARE VINTAGE WATCHMAKERS HARDINGE PIVOT POLISHER LATHE TOOL SET
HARDINGE PIVOT POLISHER FOR WATCHMAKERS LATHE tool set Marked"Hardinge Bros. Chicago Up For Auction Is A Rare Vintage Watchmakers Pivot Polisher Lathe Tool Set Marked"Hardinge Bros. Chicago. Cosmetic Condition Is As Shown In The Photos. No chips on the pulleys. All Movements Working Smoothly. Selling As Found. I Am Not A Watchmaker. So If You Have Any Specific Questions, I Ask That You Please First Search The Internet To See If You Can Find Your Answer. We Took As Many Photos As Possible To Give A Clear Representation. Please Bid/Buy With Confidence! Money Back Guarantee! If You Are Not Completely Satisfied With Your Purchase
|
|
|
Hardinge DSC Lathe Compound Slide Rest .001" Very Good Condition Fits HSL DSM
Hardinge DSC Lathe Compund Slide Rest.001" Very Nice Model: DSC Proudly Made In the USA by Hardinge of Elmira. NY. This is a used Hardinge DSC in very good condition. Please see photos. Description: This Hardinge Compound Slide Rest can be attached to Hardinge Second Operation Lathes for screw feed super-precision turning. Facing and boring operations. The large diameter feed screws are hardened and mounted on preloaded ball bearings. The Hardinge feed screw dials are 2-1/2 inches in diameter. Both dials give direct readings in.001" increments and are adjustable for zero readings. The Quick-mount lever allows for very fast mounting/dismounting to and from the lathe. Fits 3-1/2" dovetail beds such as: Hardinge HSL-59 Speed Lathe. Hardinge DV-59 First Operation Lathe. Hardinge DSM-59 Second Operation Lathe Specifications: Bottom ... moreSlide Travel: 5" Top Slide Travel: 4-3/8" T-Slot: 3/4" x 1-5/32" x 7/16" deep Dial Reading: 0.001" Direct Overall Dimensions(approximately) 13" x 15" x 4" tall Weight: Heavy. But manageable by one person. Please see photos: 1 through#5 are top views from various angles#6 and#7 are photos of the dials#8 is the bottom of the compound#9 shows the Manufacturer's engraving#10 shows the magnified angle swing gage#11 shows the tool holder that comes with the compound#12 shows the custom-made base that keeps the compound from resting on its dials when not in use. More Info: This Hardinge DSC Compound Rest Slide is in very good condition. The compound has smooth action and very little backlash. This tool was well maintained in a ultra high precision shop. Please see the photo(12) of the custom phenolic base that was built with a dovetail to hold this tool while it was not in use. The custom base prevented the tool from resting on the dials! Of course. You will receive the custom base with the compound. We will also include a Hardinge Tool Holder as seen in photo#11. Please see many current photos of the actual Hardinge Compound Rest Sli
|
|
|
FLOAT. TAPPING HEAD for HARDINGE HLV LATHE. BRAND ROYEL MINT CONDITION
FLOAT
|
|
|
HARDINGE LATHE HEAD STOCK HV-4N 5C with BRAKE and CHUCK MACHINIST TOOLS
HARDINGE LATHE HEAD STOCK HV-4N 5C with BRAKE and CHUCK MACHINIST TOOLS There are 12 photos you can enlarge to see more detail. A wrench for the chuck is also included. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check ... moreout my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Hardinge HLV-H Toolroom Lathe Parts List
You are buying a Hardinge HLV-H super precision toolroom lathe Parts List. Approximately 71 pages. Fully illustrated parts list with sectional drawings and parts numbers, a very good clear manual.Payment within 7 days.I will accept paypal.I will post worldwide. UK Postage.£2.45 Europe(EU Countries) Postage.£3.85 Rest of the world postage(Non-EU)£4.90 PDF download Link.£2.45 for Non-UK buyers only. Email to ask for an invoice for this. Sorry I do not accept foreign cheques or foreign postal orders. Please choose another payment option. See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here ... moreSee'my other items'for a good range of machine manuals and even more machine manuals here Powered by
|
|
|
Hardinge HC Precision Lathe Spare Parts Manual
You are buying a Hardinge HC Precision Lathe Parts List. Includes Turret. Digitally remastered in A4 format for easy reading. Approximately 62 pages drawings, parts list with parts numbers.Payment within 7 days.I will accept paypal.I will post worldwide. UK Postage.£2.45 Europe(EU Countries) Postage.£3.85 Rest of the world postage(Non-EU)£4.90 PDF download Link.£2.45 for Non-UK buyers only. Email to ask for an invoice for this. Sorry I do not accept foreign cheques or foreign postal orders. Please choose another payment option. See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. Or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here See'my ... moreother items'for a good range of machine manuals and even more machine manuals here Powered by
|
|
|
Hardinge HC and HCT Lathe Operators Manual
You are buying a Hardinge HC& HCT turret lathe operators manual. Approximately 42 pages digitally remastered in A4 format for easy reading with references to; foundation plan. Lifting and levelling, specification, installation, controls, attachments, gib adjustment, lubrication and maintenance, turret tooling, thread copying etc. etc.Payment within 7 days.I will accept paypal.I will post worldwide. UK Postage.£2.45 Europe(EU Countries) Postage.£3.85 Rest of the world postage(Non-EU)£4.90 PDF download Link.£2.45 for Non-UK buyers only. Email to ask for an invoice for this. Sorry I do not accept foreign cheques or foreign postal orders. Please choose another payment option. See'My Other Items' For Full List Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to ... morediscuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by
|
|
|
Hardinge CHNC Lathe Operating & Programming Manual
You are bidding on a Hardinge CHNC super precision lathe operating and programming manual. Approx. 120 pages digitally remastered in A4 format for easy reading dealing with all aspects and including; lifting. Installation, levelling, specifications, general maintenance, oiling and lubrication, control panel, tape and manual data input, absolute and incremental data programming, storing programmes, scalling, programming examples, thread cutting, Payment within 7 days.I will accept paypal.I will post worldwide. UK Postage.£2.45 Europe(EU Countries) Postage.£3.85 Rest of the world postage(Non-EU)£4.90 PDF download Link.£2.45 for Non-UK buyers only. Email to ask for an invoice for this. Sorry I do not accept foreign cheques or foreign postal orders. Please choose another payment option. See'My Other Items' For Full ... moreList Of Machine Manuals. Ask Me A Question' if you cannot see the one you want. or you can contact me to discuss anything or pay by credit/debit card on 01623-491001 or 07710-401194 See'my other items'for other machinery/tooling and also here See'my other items'for a good range of machine manuals and even more machine manuals here Powered by
|
|
|
Hardinge Model HSL-59 Super Precision Speed Lathe - With Lever type Cross Slide
Gold International Machinery Corporation | Hardinge Model HSL-59 Super Precision Speed Lathe S/N: HSL-59-5116-T Our Inventory Number: 8846-440 Technical Specifications: 230V/3PH/60HZ, Year of mfg. 1982, Spindle type: tapered, Spindle capacities: Round 5C collet: 1-1/16" Hexagon 5C collet: 7/8" Square 5C collet: 3/4" Step chuck: 6" Jaw chuck: 5" Expanding collet: 3" Spindle speeds: 750. 1800, 3000 RPM, Swing over bed: 9" Length of bed from face of spindle: 10" Spindle motor: 0.5HP, 3/60, Estimated overall dimensions: 29" x 33" x 14" high, Estimated weight: 300 lbs. Equipped With: Lever type. Double tool cross slide, This item is in very good condition! We will palletize. Cover, and load truck for an additional $200. As always we will load your truck for free from our loading dock Thank ... moreyou for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placin
|
|
|
Hardinge Lathe Chuck and Nose Cover
Hardinge chuck and spindle cover. Chuck is 5" with treaded nose. Sold as shown with no chuck jaw. No warranties expressed or implied.
|
|
|
HARDINGE SUPER PRECISION DV59 DSM59 LATHE WITH TURRET AND TAILSTOCK 460V OR 230V
Made in the U.S.A. by Hardinge Brothers. Inc. of Elmira. N.Y. This is a used Super Precision High Speed Second Op Lathe in working condition. Model# DV-59/ DSM-59 Serial# DV-59-18644 Features: Hardinge Dovetail Bed/ Hardened and Ground· 1 Horsepower Motor· Built-In Coolant Facilities with Gusher Pump· Six Station Turret. Tailstock· Includes collets shown in pictures. Specifications: Capacities: Swing Over Bed: 9" Swing Over Cross Slide(Over Hardinge Cross Slide) 6" Swing Over Compound Slide(Over Hardinge Compound Slide) 2" Spindle: Spindle Mount: 2-3/16" 10 tpi Spindle Bore: 1-1/8" Spindle Speeds: 230 to 3.500 rpm Spindle Capacity: Round 5C Collets: 1-1/16" Hexagon 5C Collets: 7/8" Square 5C Collets: 3/4" Step Chucks: 1-1/16" to 6" Jaw Chucks: 5" Jaw Chucks(thru spindle) ... more1-5/32" Turret: Tool Capacity: 5/8" diameter Travel: 4" Bed: Bed Width: 3-3/8" Bed Length: 30-3/8" General: Motor: 1 Horsepower Electrical: 460 Volt. Three Phase Overall Dimensions: 67" x 32" x 65" tall Comes as shown in pictures.
|
|
|
Hardinge Sjogren No. 2 Lathe Speed Chuck, L1 Long Taper Spindle Mount-2J Collets
Sjogren/ Hardinge Bros. lathe speed chuck for L1/ 2j. Please note the visible brazing that a P.O. did on two sides of the chuck. I suspect that at some point the internal pinion pins became loose and were brazed in place. This is just a guess as I have not disassembled to inspect. The chuck seems to work as it should. I placed a collet in the taper and turned the wheel and it pulled in correctly. We are starting this with a ridiculously low starting bid because of the brazing. STANDARD SHIPPING: We use USPS Parcel Select or Priority Mail for most objects. Items over a certain size/weight may ship UPS and would require a street address to ship to. Shipping figured by item plus package weight with no handling charge. If you are purchase multiple items from us and we ship them together. We'll adjust shipping to reflect accurate package weight. ... moreWe've been buying and selling periodically on eBay since the 1990s and have a reputation for fair deals and great service.
|
|
|
Hardinge HLV-H Precision Tool Room Lathe, w/ 6 Tool Holders & Collets
Hardinge HLV-H Toolroom Lathe. Variable Speed 125-3,000RPM. Specification Description Swing Over Bed, 11" Swing Over Carriage, 9" Swing Over Cross-Slide, 6" Distance Between Centers, 18" Spindle Hole, 1.25" Spindle RPM, 125-3.000 RPM, Main Motor, 1.5 HP, Longitudinal Variable Feed Rates, 5/16 to 7 IPM, Cross Feed Variable Feed Rates, 3/16 to 4 IPM, Inch Threads, 11- 108 tpi, Electrical, 208V/ 3 PH, Machine Weight, 2.700 Lbs. Equipped With: Quick Change Tool Post. Chip Shield, 6 Tool Holders NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect ... moreAll Used Machinery Prior to Purchase. Need help with Questions on shipping or assistance with this machines specifications? Feel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
|
|
|
0.5HP Hardinge HSL-59 SPEED LATHE, Air-Actuated 5C Collet Closer,115Volt Single
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 0.5HP Hardinge HSL-59 SPEED LATHE. Air-Actuated 5C Collet Closer,115Volt Single Ref# 143911 iammdna XSPEED HARDINGE SPEED LATHE MODEL: HSL. S/N: HSL-5C-6694-T, NEW: 1996 SPECIFICATIONS: SPINDLE NOSE. ... moreHARDINGE TAPERED SWING OVER BED. 9" LENGTH OF BED FROM FACE OF SPINDLE. 10" SPINDLE CAP. w/ROUND 5C COLLETS. 1-1/16" SPINDLE CAP. w/HEXAGON 5C COLLETS. 7/8" SPINDLE CAP. w/SQUARE 5C COLLETS. 3/4" SPINDLE CAP. w/STEP CHUCKS. 6" SPINDLE CAP. w/JAW CHUCKS. 5" SPINLDE CAP. w/EXPANDING COLLETS. 3" 3) SPINDLE SPEEDS. 750. 1800, 3000 RPM APPROX. WEIGHT. 600 LBS EQUIPPED WITH: HARDINGE AIR ACTUATED 5C-LEVER TYPE COLLET CLOSER FLOOR STAND SOLID ONE PIECE HEADSTOCK& BED CONSTRUCTION FORWARD/ REVERSE SWITCH 1/2 HORSE POWER MOTOR. 1 PHASE 60 CYCLE PRESENTLY WIRED 115 VOLT OPERATION INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: SUPERB* Machine Location: HARRISON. NJ Click Here For More Hardinge Machines Click Here For More Toolroom Machines- SPEED LATHES(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In
|
|
|
8 HARDINGE SPECIAL CARBIDE TIPPED BORING BARS FOR THREADING LATHE TOOLS
UP FOR SALE IS 8 HARDINGE SPECIAL CARBIDE TIPPED BORING BARS FOR THREADING LATHE TOOLS. THIS IS 8 HARDINGE SPECIAL CARBIDE TIPPED BORING BARS. THEY ARE MARKED"HARDINGE SPECIAL IRT-25-A" THESE ARE USED FOR I.D. THREADING. SHANKS ARE 1/4" MEASURE APPROXIMATELY 2-1/2" LONG OVERALL. IN GOOD CONDITION AND MOST OF THEM LOOK LIKE THEY HAVE NEVER EVEN BEEN USED. NEED SOME CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1691
|
|
|
11 HARDINGE SPECIAL CARBIDE TIPPED BORING BARS THREADING, SLOTTING LATHE TOOLS
UP FOR SALE IS 11 HARDINGE SPECIAL CARBIDE TIPPED BORING BARS THREADING. SLOTTING LATHE TOOLS. THIS IS 11 HARDINGE SPECIAL CARBIDE TIPPED BORING BARS. THEY ARE MARKED"HARDINGE SPECIAL IRT-37-A" MOST OF THESE LOOK LIKE THEY ARE USED FOR I.D. THREADING. SHANKS ARE 3/8" DIAMETER WITH A FLAT. MEASURE APPROXIMATELY 3" LONG OVERALL. IN GOOD CONDITION. NEED SOME CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1690
|
|
|
1989 Hardinge Model CHNC-I CNC Lathe and Roll Away Bar Feeder. Includes Warranty
1989 Hardinge Model CHNC-I CNC Lathe Manufacturer: HARDINGE Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Specifications: Chuck Size: 6.48 in Bar Capacity: 1.57 in# Axis: 2 Power: 7.5 hp RPM: 5000 rpm Turning Dia: 5.11 in Swing: 13.7 in Centers: 11.7 in Control: Fanuc OT Lipe Model AML-100"Roll Away" Bar Feeder PAYMENT: Payments can be made by Bank Wire. Check, Paypal, Money Order or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight cost. Buyer is responsible or assumes liability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible ... morefor all arrangements and costs related to shipping. Any relevant duties. Customs, brokerage fees, taxes, and charges are the buyers responsibility. These charges may be collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Available for pick-up on Monday to Friday during business hours and on Saturday if requested. Feel free to contact us if you have any questions or would like more information. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f7aaaaeb0-0xf3-
|
|
|
Hardinge L6-B 4 Station Turret Tool Post / Lathe Tools & Equipment, Tool Holders
Hardinge L6-B 4 Station Tool Post Manufacturer: Hardinge- Model: L6-B- Type: Tool Post- Stations: 4 Condition: Used- Retail Price: Unkown- TERMS AND CONDITIONS- PAYMENT Payment is expected within 5 days of auction close. Unless prior arrangements had been made. If payment is not received within 7 days a Non-Paying Bidder(NPB) warning will be filed with eBay. A negative feedback will be left if the buyer does not answer the NPB warning within 10 days. I am a reasonable person and as long as the communication channels are open and clear, I have no problems accommodating special circumstances. By entering a bid. You are entering into a legal binding contract to purchasing the item described above. Please do not bid if you are unable to comply with the terms of the sale and eBay policies, or are unsure/unable to pay, or have no intention to purchase ... morethe item. SHIPPING Shipping is paid for by the buyer unless stated otherwise. I ship within the first 4 business days(usually less than 2 business days) after receiving payment for the item and shipping. Each item is packaged carefully to make sure it gets to you in excellent condition. Each package is provided with a tracking number. ALL ITEMS ARE SOLD AS-IS WHERE-IS. LISTING DESCRITIPTIONS ARE TO OUR BEST KNOWLEDGE AND ARE SUBJECT TO CHANGE. FOR MORE INFORMATION ABOUT THIS LISTING PLEASE CALL RUBEN AT(209) 247-3844
|
|
|
3J Hardinge 1/4 Hex Collet 0.25 Lathe Holder
1 used Hardinge 1/4" Hex 3J Collet. It has rub marks on the face. But otherwise in good condition! Free Shipping in the US via Priority Mail. Get it fast! I usually ship same day.
|
|
|
Lot of (4) Hardinge L1 5/8" Boring Tool Holders for Tool Post / Lathe Tools
4 Hardinge L1 Tool Holders Manufacturer: Hardinge- Type: Tool Holder- Model: L1- Quantity: 4 Condition: Used- Retail Price: Unkown- TERMS AND CONDITIONS- PAYMENT Payment is expected within 5 days of auction close. Unless prior arrangements had been made. If payment is not received within 7 days a Non-Paying Bidder(NPB) warning will be filed with eBay. A negative feedback will be left if the buyer does not answer the NPB warning within 10 days. I am a reasonable person and as long as the communication channels are open and clear, I have no problems accommodating special circumstances. By entering a bid. You are entering into a legal binding contract to purchasing the item described above. Please do not bid if you are unable to comply with the terms of the sale and eBay policies, or are unsure/unable to pay, or have no intention to purchase ... morethe item. SHIPPING Shipping is paid for by the buyer unless stated otherwise. I ship within the first 4 business days(usually less than 2 business days) after receiving payment for the item and shipping. Each item is packaged carefully to make sure it gets to you in excellent condition. Each package is provided with a tracking number. ALL ITEMS ARE SOLD AS-IS WHERE-IS. LISTING DESCRITIPTIONS ARE TO OUR BEST KNOWLEDGE AND ARE SUBJECT TO CHANGE. FOR MORE INFORMATION ABOUT THIS LISTING PLEASE CALL RUBEN AT(209) 247-3844
|
|
|
L & I USA REAMER SET ATLAS DELTA CRAFTSMAN LOGAN SOUTH BEND HARDINGE LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand L& I Packaging In Case Condition Excellent Quantity 1 Set Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1240- 1260- 1865- 1885- 2490- 2510- 3115- 3135- 3740- 3760- 4365- 4385- 4990- 5010 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Themac tool post grinder Type J35 lathe attachment Lebond clausing hardinge etc
BOXED ITEM You Are Bidding on a preowned 1/2 hp grin der arbor s/n 120 V 1 phase, 2300.00 replacement cost ready to work for you! Buy used and save. Item is ready to use. Any shop or machinist thinking about buying a new unit will love this sweet deal. You will not only make money with this set up but you will save big over a new purchase. A bargain compare to new price. Description info from mfg for reference. MFG Specifications of a new unit for reference only! cash.Checks,money orders, PayPal Shipping paid by buyer. See calculator or flat rate for price. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees will apply. Domestic handling time Will usually ship within 5 business days of receiving cleared payment. Shipping insurance Optional(based on location and shipping service) Sales ... moretax Seller charges sales tax for items shipped to: IL(8.750% Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Any Flat rate shipping price listed is to the lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. See are high positive feedback rating and bid with confidence. I always return feedback so leave some good comments so I can do the same for
|
|
|
MT 4 COLLIS LATHE QUICK CHANGE MAGIC CHUCK 1 11/16" BORE SOUTH BEND HARDINGE
LOTS OF AUCTIONS ONLINE NOW! Brand Collis Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
ROYAL 4 POSITION LATHE TOOL POST LOGAN SOUTH BEND HARDINGE ATLAS CLAUSING
LOTS OF AUCTIONS ONLINE NOW! Brand Royal Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 3 1/2" Square. 5/8" Max Tool Bit. 1 3/8" x 2 11/16" Bottom Square. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
HARDINGE DSM-59 LATHE - EXCELLENT CONDIITON
HARDINGE MODEL DSM-59 TURRET LATHE NEW 1988- Hardly Used/ Excellent Condition. SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED. BALL BEARING, VARIABLE SPINDLE SPEEDS: 230 TO 3500 RPM, WITH ROUND 5C COLLETS: 1-1/16″ WITH HEXAGON 5C COLLETS: 7/8″ WITH SQUARE 5C COLLETS: 3/4″ WITH 5C STEP CHUCKS: 6″ WITH JAW CHUCKS: 5″ WITH JAW CHUCKS.THROUGH SPINDLE) 1-5/32″ BED LENGTH(FROM SPINDLE FACE) 29″ SWING OVER BED: 9″ COOLANT SUMP CAPACITY: 3 US GALLON, SHIPPING WEIGHT. APPROX: 1,250 LBS, DIMENSIONS: 67″ L X 32″ D X 57″ H, ELECTRICS: 208 VOLTS. 3 PH, 60 CYC, 1 HP, COOLANT SYSTEM, LEVER TYPE 5C COLLET CLOSER, 6-POSITION TURRET, LEVER TYPE QUICK CUT-OFF SLIDE, HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
INTERSTATE CARBIDE BORING BAR LATHE HARDINGE ATLAS CLAUSING MONARCH ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Interstate Packaging In Case Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Missing inserts. 1 1/4" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
ACCUPRO CARBIDE BORING BAR LATHE HARDINGE ATLAS CLAUSING MONARCH ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Accupro Packaging In Case Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
LOT OF 18 LATHE MANDRELS ATLAS CRAFTSMAN LOGAN SOUTH BEND MYFORD HARDINGE ETC
LOTS OF AUCTIONS ONLINE NOW! Brand Various USA Packaging None Condition Very Good Quantity 18 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1" 7/8" 13/16" 3/4" 11/16" 5/8" 9/16" 1/2" 29/64" 7/16" 13/32" 3/8" 5/16" 1/4" 3/16" 11/64" 5/32" 1/8" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case ... morebasis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
HARDINGE DV-59 2nd OP CHUCKER LATHE
FOR SALE: HARDINGE DV-59 2nd OP CHUCKER LATHE. VARIABLE HIGH/LOW SPEED. CROSS SLIDE. 6 POSITION TURRET. TAILSTOCK. SERIAL# DV-59-12653. CURRENTLY NOT UNDER POWER. CONDITON'GOOD. FULLY FUNCTIONAL' WHAT YOU SEE IN PICTURES IS WHAT YOU WILL RECEIVE. BUYER IS RESPONSIBLE FOR MAKING FRIEGHT ARRANGMENTS WITHIN FIVE DAYS OF AUCTION END. WE EXCEPT PAYPAL ONLY. PLEASE COMPLETE FULL PAYMENT WITHIN THREE DAYS.
|
|
|
ARMSTRONG # S-52 LATHE SHAPER TOOL HOLDER LOGAN SOUTH BEND HARDINGE
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 11/16" x 1 3/8" Shank. 3/8" Max Bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
READY WILLARD #2E LATHE SPRING TOOL HOLDER LOGAN SOUTH BEND HARDINGE
LOTS OF AUCTIONS ONLINE NOW! Brand Ready Willard Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1/2" x 1 1/8" Shank. Missing cutter. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
WILLIAMS # 16 LATHE REVERSABLE BORING TOOL HOLDER LOGAN SOUTH BEND HARDINGE
LOTS OF AUCTIONS ONLINE NOW! Brand Williams Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1/2" x 1" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
HARDINGE DSM59R 2ND OP CHUCKER LATHE
FOR SALE: HARDINGE DSM59R 2ND OP CHUCKER 240 VOLT WITH AIR DRAWBAR COLLET CLOSER PNEUMATIC FEED ADD ON WITH EXTRA COLLETS NON VARIABLE SPEED NOT UNDER POWER CONDITION'GOOD' BUYER IS RESPONSIBLE FOR LOCAL PICKUP OR FREIGHT ARRANGEMENTS WITHIN FIVE DAYS PLEASE MAKE PAYMENT VIA PAYPAL ONLY WITHING FIVE DAYS OF LISTING END MACHINE IS BEING SOLD AS-IS. NO WARRANTY
|
|
|
HARDINGE LATHE MANUAL, DSM59 AND VBS, BROCHURE
Good condition manual/ brochure for DSM59 and VBS lathes dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f8a03c50a-0xfd-
|
|
|
HARDINGE LATHE MANUAL / BROCHURE, SECOND OPERATION CHUCKING, 24 PAGES
Good condition manual/ brochure from HARDINGE
|
|
|
HARDINGE LATHE MANUAL, TFB-H, SALES BROCHURE, 24 PAGES
Good condition manual/ brochure for TFB-H lathe.
|
|
|
SPECIALTIES Co. LATHE QUICK CHANGE TOOL POST CLAUSING HARDINGE LOGAN HARDINGE
LOTS OF AUCTIONS ONLINE NOW! Brand Specialties Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Quite interesting. I have never seen one like it before. 3/4" Bore Center Hole. 3 1/4" Square. 5/16" Tool Bit Holders. 15/16" Cut-off Blade. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non ... morerefundable. Always buying and selling fine tools for the machinist and woodworker. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f8b1bab5f-0xf6-
|
|
|
HARDINGE BROS. LATHE PIVOT POLISHING ATTACHMENT for WATCHMAKERS / CLOCKMAKERS
Offered is precision clock/watch makers/ jewelers lathe attachment. Hardinge Bros. of Chicago pivot polishing attachment. The circular deck that hold the polisher rotates 360 degrees. This attachment came with a bunch of attachments including 3.4 and 6 jaw chucks and more. All will be listed in the next day or 2. Shipping will run $10.00 within the US. International shipping is available. On Jun-12-13 at 17:16:21 PDT. Seller added the following information:
|
|
|
LARGE LATHE TOOL POST & WRENCH LOGAN SOUTH BEND HARDINGE CLAUSING MONARCH ETC
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1 11/16" x 1 15/16" Bottom Square. 11/16" x 2 1/2" Opening. 1 11/64" Body Dia. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker.
|
|
|
VINTAGE ELGIN HARDINGE ATLAS LATHE COMPOUND CROSS SLIDE SPLIT BED GOOD CONDITION
This is a vintage Elgin Tool Works lathe compound in good condition. The dovetailed ways have been reconditioned/machined parallel so there is no slop. There is about.007" backlash in the X-axis. There is about.010" backlash in the Y-axis. Both handles turn smooth and tight. There are tooling marks on the compound as shown in the pics. The base measures 3 5/8" x 6 1/2" It measures 3 1/2 inches tall. This compound comes with a shop made shoe attachment to fit on an Atlas 10" lathe(2 3/4 inch space between the rectangular ways) I used it on my Atlas lathe. Which has some slop in the original compound. Mounted on the Atlas, it turns it into a nice, precision lathe when desired. Of course the screw drive does not function with it. You can see it mounted in one of the pics. This shoe locks down on the rectangular ways ... moreof the Atlas bed. The tailstock and factory compound needs to be moved to the right, on a long bed this is no problem. It does not have any shoe or any mounting hardware for other split bed lathes. This will make a nice compound for a number of vintage split bed lathes as well as the Atlas or Elgin or Hardinge. Thanks for looking! PAYMENT– I accept PayPal only SHIPPING AND HANDLING– DOMESTIC: USPS Priority Mail INTERNATIONAL: USPS Priority Mail International TERMS OF SALE– I value my feedback rating and will guarantee your satisfaction. If you have any issues with the item you won. Please contact me before leaving feedback and I will do all I can to make it right for you. Please inspect the item immediately upon receipt. If it does not meet your approval you may return it to me within 14 days for a full refund. Return shipping. Including insurance costs are the responsibility of the customer. I will not be responsible for returned merchandise that is damaged in shipping. No returned packages will be accepted freight collect or C.O.D.
|
|
|
Toolpost With Williams Wrench For Larger Metal Lathe Southbend Sheldon Hardinge
See pics of toolpost and Williams wrench. 4x4x3.75 opening is approx:2x1.25d Indexable tool holder NOT included UNLESS you Buy It Now and receive the valenite tool holder seen in last 2 photos! Posted with
|
|
|
U.S.A!! HARDINGE TURNING / FACING TOOL HOLDER FOR A SECOND OP LATHE
aims U.S.A! HARDINGE TURNING/ FACING TOOL HOLDER FOR A SECOND OP LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge Brothers of Elmira. New York. This is a Turning/ Facing Tool Holder for a Second Op Lathe in good condition. Model# C16 Specifications: Tool Capacity: 1/2" Overall Lengths: 4-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! HARDINGE TURNING/ FACING TOOL HOLDER FOR A SECOND OP LATHE Reliable Tool Inc. c 2011 | Powered by
|
|
|
VERY NICE HARDINGE 9" X 13" CHUCKER LATHE MODEL HC 3 PHASE 220 VOLTS
VERY NICE HARDINGE 9" X 13" CHUCKER LATHE MODEL HC 3 PHASE 220 VOLTS Prev Stop Play Next You are bidding on a Hardinge Chucking Lathe. Model: HC. This is a very nice lathe in great condition and it is fully guaranteed. 1-1/16" Bar Cap 6" Max. Turn Diameter 9" Swing. Over Bed 13" Face of Turret To Spindle 3000 RPM 4 1/2" Cross Travel 8 Position Turret We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery
|
|
|
HARDINGE #HCT SUPER PRECISION CHUCKING LATHE
aims HARDINGE#HCT SUPER PRECISION CHUCKING LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge Bros. of Elmira. NY. This is a used Super Precision Chucking Lathe in working condition. Model# HCT Serial# 28788 Features: High Speed: In any program for low-cost production. Speed is essential-a fact proven in thousands of plants using Hardinge High Speed Precision Machines. Hardinge chuckers are large capacity high speed machines with speeds to 3,000 rpm. Accuracy: Hardinge Super-Precision Chucking Machines designed for high speed production work are built to the same fine standards of accuracy as Hardinge tool room lathes. This proper combination assures rapid production of good parts at low cost. Ease of Operation: Close observation in a production department ... morewill reveal the use of machines entirely out of proportion to the work. The Hardinge Chucking Machines are purposely designed to fill the gap between the second operation machine and large slow speed turret lathe. They provide extreme accuracy. High spindle speeds and ease of operation to give low-cost production. Headstock: Super-Precision Preloaded Ball Bearing Spindle. Collet seats directly in spindle. Solid One-Piece totally enclosed headstock frame. Spindle speeds to 3.000 rpm. Super-Precision Spindle: The Hardinge Super-Precision preloaded ball bearing spindle is mounted in the solid one-piece totally enclosed headstock housing for maximum rigidity and sustained accuracy. The bearings require no adjustment and are permanently lubricated to operate at all speeds without attention. Preloading eliminates all end play. Radial play and assures the turning of true pieces. The collet seats directly in the hardened and precision ground spindle. Thus eliminating troublesome sleeves and adaptors that introduce costly inaccuracies. The rigidity provided for sustained accuracy also provides the proper support for work when cutting with carbide tooling. Fast Lever Collet Chucki
|
|
|
Feeler FTL-618E Precision Tool Room Lathe, A quality Hardinge HLV knock-off
This is a great running machine that we have been using for 8+ years. It has been well maintained and has not given us any trouble. This machine get used regularly for component manufacturing including fine mold making and single point threading. This machine includes a recently added glass scale DRO. This machine is operational in our shop. See it run! Accessories included with this machine Users Manual 3-jaw Hardinge chuck Additional single point gears Steady Rest Collet guard 5C Collets. Tool post and a variety of lathe tooling available at additional cost Machine Specifications: 230 Volts/ 3 Phase/ 60 Hertz, Spindle construction: HARDINGE ball bearing, Spindle capacity with round type 5C collets: 1-1/16" Spindle capacity with step chucks: 1-1/16" to 6" Spindle capacity with jaw chucks: 5" Spindle capacity with expanding ... morecollets: 3" Variable spindle speeds: 125-3.000 R.P.M. Hole through spindle: 1-1/4" Swing over bed: 11" Swing over carriage: 9" Swing over cross slide: 6" Distance between centers: 18" Compound slide travel: 3" Carriage power feed range: 5/16-7 I.P.M. Cross slide power feed range: 3/16-4 I.P.M. Tailstock spindle diameter: 1-3/8" Tailstock spindle taper: 2 MT, Range of threads in gear box(27) 11-108 T.P.I. Weight: 1800 lb. Dimensions(approximate) 70"W. 58"H, 36"D. Condition: Excellent. Location: Santa Rosa. CA. Shipping: Local pickup is preferred. We can skid this item and ship it to you nationwide. Buyer Shipping Cost: rigging $160. Skid $225, freight- location dependant. This machine is operational. See it run in person or request a webcam inspection. California buyers must pay local sales tax. CA 7.5%
|
|
|
Rare Hardinge 2H Lathe Collets and PS-95X Tapered Collet Adapter
Up for auction is a set of Hardinge 2H collets. These collets are extremely rare and hard to find. The sizes included in this auction are 1/8" 1/4" 7/16" 1/2" 5/8" and 9/16" A collet adapter is also included, and has the markings PS-95X shown in one of the attached photographs. Please note that two of the collets have been bored out to hold diameters larger than their original markings. The 5/8" collet has been bored out to a diameter of 0.807" and to a depth of 0.600" and the 9/16" collet has been bored out to a diameter of 0.875" and to a depth of 0.370" Both collets can still hold bar stock of their respectively marked sizes, but were apparently altered to hold these additional sizes as well. Notes: These Collets Show Expected Patina Due to Use The Pictures Best Describe Condition-Sold ... moreAs Pictured All the items listed are USED. And I will state otherwise only if they are new. I am just a reseller, not a professional. The Buyer is responsible for any damages during shipping. Please let me know if you want to purchase shipping insurance right after you win the item. You must contact me with any questions prior to bidding. If I find anything obviously abnormal I will note it in my description. I try to take pictures at all angles for your eyes so please allow these pictures to best describe the item. ALLOW PICTURES TO DETERMINE CONDITION AND BIDDING ANY QUESTION EMAIL PRIOR TO BIDDING Pics are of actual item up for bid. No international bidders. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13fae611a5e-0xf6-
|
|
|
HARDINGE #2 COLLET SPEED CHUCK 2J COLLET D1-6 LATHE MOUNT ***VGC***
HARDINGE#2 COLLET SPEED CHUCK 2J COLLET D1-6 LATHE MOUNT*VGC* HARDINGE COLLET CHUCK. USES 2J COLLETS D1-6 MOUNT IN EXCELLENT CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Hardinge lathe Dog Drive Plate for Tapered Twist lock Spindles. free Shipping
Hardinge lathe Dog Drive Plate for Tapered Twist lock Spindles. free Shipping in USA only.
|
|
|
5-C SET OF 16 EA COLLETS HARDINGE / ROYAL/ R.S.B USA MADE FOR LATHE MILL CNC
YOU BIDDING ON A USED SET OF 16 5-C COLLETS. FROM 1" TO 1/16" COME WITH COLLET RACK. ON EA 1" 15/16, 7/8, 13/16, 3/4, 11/16, 5/8, 9/16, 7/16, 3/8, 5/16, 1/4, 3/16, 1/8, 3/32, 1/16, ALL IN A GOOD WORKING CONDITION, SOME LIGHT MARKS ON THE FACE CAN BE SEEN IN THE PHOTOS. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES $18.00
|
|
|
METAL LATHE---HARDINGE---VERY SOLID MACHINE
YOU ARE BIDDING ON A HARDINGE MANUAL LATHE IN GREAT CONDITION! This HARDINGE lathe is a very solid 6" swing lathe great for hobbyists. You can not thread on this lathe. HARDINGE make some of the best CNC lathe machine today but this rare. Hard to find manual lathe is great for turning any material and will be a great addiditon to any shop! 6" SWING LATHE WOODEN TABLE TOP WITH CAST IRON LEGS ALL ORIGNAL WRENCHES TAIL STOCK A BOX OF GOOD BITS MULTIPLE TOOL HOLDERS This Lathe comes with a lot of extras and all needed tools for proper machining! BUYER IS RESPONISBLE FOR SHIPPING COSTS. 1$ IS SHOWN FOR SHIPPING BUT THIS IS NOT THE COST OF SHIPPING. WE LIST ONE DOLLAR BECAUSE WE HAVE TO SHOW A PRICE TO LIST AS AN AUCTION. IT IS THE BUYERS RESPONSABLITIY TO ARRANGE SHIPPING AND PICKUP. WE SUPPLY THE LATHE AND EVERYHTING ELSE ON A PALLET ... moreWRAPED WITH SIRAN WRAP. I WILL SEND THE BUYER A PICTURE OF THE PACKED UNIT SO YOU KNOW WHAT TO EXCPECT. LOCAL BUYERS CAN PICK UP FROM US WE HAVE A FORKLIFT AND WILL LOAD PALLET ONTO ANY TRUCK OR TRAILER. THIS UNIT WEIGHTS AROUND 450LBS INCLUDING ALL PARTS AND SKID ASK ANY QUESTIONS YOU MAY HAVE Posted with
|
|
 |