In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
228.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts ... moreand crafts DIY Design (Note:No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
$
99.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Sharpsburg, United States
Pair (2), MakerMade CNC XY Axis Motors, DC12V.
$
394.25
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Accurate engraving is not possible without an engraving machine. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily ... moreaccommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
$
405.00
Buy It Now
$10.00 Shipping
Condition: New
Location: Chino, United States
Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). ... moreWide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
$
1199.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Engraving machine parameters: X, Y, Z Working Area: 600(Y)*390(X)*120(Z)mm Outside dimension: 865*680*570mm(L*W*H) Table size: 770(Y)*490(X)mm Lathe structure: ... more6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm Spindle motor (tips:1. The spindle motor must connect with the VFD. 2. It cannot directly connect with the supply voltage (AC110V/220V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Outside dimension: 65*158mm Material: 304 sta.
$
72.86
Buy It Now
Free Shipping
Condition: New
Location: China
Series: MXG.
$
579.50
Buy It Now
Free Shipping
Condition: New
Location: China
Cloud L10 laser engraver has 80W machine power and 10W+ continuous pulse output power. With air assist and precise focus, Cloud L10 laser engraving machine ... moreis capable of cutting a 10mm wood board and a 5mm black acrylic board in ONE PASS.
$
15.90
Buy It Now
Free Shipping
Condition: New
Location: China
Because we are factory direct sales. our product is the lowest price among the high quality. Why is our price so low?.
$
11.50
Buy It Now
Free Shipping
Condition: New
Location: China
Suit for milling machine Part.
$
12.08
Buy It Now
Free Shipping
Condition: New
Location: China
Plate:50mm 20mm 3mm (Length Width Thickness).
$
1199.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
$
1199.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. The machine can connect with computer as other external device such ... moreas printer, scanner. X axis---1605 Ball Screws.
$
2072.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:600x900x150mm ... moreSliding unit: X axis:SFU1605 Ball Screws; Y axis:SFU1605 Ball Screws; Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails; Z axis: ø12 high-strength round rail Stepping motor:two-phase 3A (with hand wheels) Driving Power for Stepping motor:AC110,240W, Output DC24V10A Maximum Idle speed:1500mm/m Working Speed:50-1500mm/min (different material with different speed settings) Spindle motor:2200W high-speed variable frequency spindle motor, ER20 chuck.
$
394.26
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
4040 CNC Machine Kit. Power: 100w. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). With an effective engraving ... morearea of 400 400 83mm, the machine can easily accommodate most projects.
$
299.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
Fits Razorweld Razor Cut 45, Vipercut 30. Razorcut X45 - 70A Plasma Torch. This is NOT A HYPERTHERM TORCH Torch uses many STANDARD Hypertherm Parts for ... morean AMAZING CUT.
$
1199.00
Buy It Now
$100.00 Shipping
Condition: New
Location: Chino, United States
Engraving Machine Parameters: X, Y, Z Working Area: 600(Y)*390(X)*120(Z)Mm Outside Dimension: 865*680*570mm(L*W*H) Table Size: 770(Y)*490(X)Mm Lathe Structure: ... more6061/6063 Aluminium Alloy Max. Feeding Height: ≤100mm Drive Unit: X Axis---1605 Ball Screws Y Axis---1605 Ball Screws Z Axis---1204 Ball Screws Sliding Unit: X Axis---High Intensity Chromeplate Shaft Y Axis---High Intensity Chromeplate Shaft Z Axis---High Intensity Chromeplate Shaft Stepping Motor: 57 Two-phase 3a 150n.cm Package Include 1 * Remote Controller 1 * Cable .
$
169.11
Buy It Now
$10.00 Shipping
Condition: New
Location: Chino, United States
Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. 1 Box of ... more10cs Cutter(3.175mm). Communication Interface: Usb Port to Computer.
$
2199.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Package list: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X USB cable ... more2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual 1x Tools Setting Auto-Check Instrument.
$
935.00
Buy It Now
$1000.00 Shipping
Condition: New
Location: Gonesse, France
The machine can connect with computeras. X axis 1605 Ball Screws. Y axis 1605 Ball Screws. Z axis 1204 Ball Screws. MDF board, native wood, PVC, Acrylic, ... morewood, composite board plywood. like aluminum.
$
3842.53
Buy It Now
$888.00 Shipping
Condition: New
Location: China
Small Size Four Axes Jewelry CNC Engraving Machine. •Desktop Design: a printer sized micro four axes multifunctional all-in-one machine;. •Micro Four ... moreAxes Machining Device: perfect solution for customization works.
$
1998.57
Buy It Now
$50.00 Shipping
Condition: New
Location: Chino, United States
6090 Router 4axis+2.2kw Spindle Motor +Vfd +Usb Port Metal Wood Engraver with Tool Sensor Sku:2200w-6090t1-Usb+2200w-6090t2-Usb+2200w-ts009usb Support ... moreWin7 64-Bit and Win10 64-Bit Installation Package List: 1x Main Unit (Frame) 1x Main Unit (Working Base) 2x Fence Baffle 1x Control Box 1x a Axis 1x Sinal Cable for a Axis 1x Pump 1x Usb Cable 2x Cutter 2*6mm 2x Cutter 3*6mm 10x 4*7mm Round Head 6x 4*10mm Black Inner Six Angle Screw with Nut 8x 5*20mm Black Inner Six Angle Screw 4x 5*8mm Flat Philip's Head Screw with Nut and Gasket 8x 6*24mm Balck Flat Inner Six Angle Screw 12x Aluminium Fastener 1x 13-15# Wrench 1x 14-17# Wrench 2x Six Angle Wrench(3mm) 2x Six Angle Wrench(4mm) 1x Teflon Tape 2x Fuse (5a) 1x Power Cable 1x Manual 1x Tools Setting Auto-check Instr.
$
39.55
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
5 pieces HDW BT40 tool holder clamp in US warehouse.
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Marshalltown, United States
The power source is the machine itself, so you won't have to worry about any external power sources.
$
183.35
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet Axis: 80RPM. Step motor: 57 phase stepper motor (two-phase 4 wire ... morecurrent 3A ). Angle: 0.3 degree / step. Step angle: 1.8°±5%.
$
1199.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
$
36.79
Buy It Now
Free Shipping
Condition: New
Location: China
Gear Type:Straight. Suit for : R8 、NT30 milling machine head.
$
35.00
Buy It Now
$30.00 Shipping
Condition: New
Location: Kaznějov, Czech Republic
Input current: 1.6mA @5V. 9.5mA @24V. input polarity: NPN/PNP (switchable). input phase output type output current: max. output phase: NORM al/INV erted ... more(switchable). Wiring of the output asNPN .
$
8.00
Buy It Now
$3.90 Shipping
Condition: New
Location: China
TiAlN coating. 5/8“ 15.875mm…………50mm…………15.875mm………100mm. 1/2” 12.7mm…………35mm…….12.7mm…………75mm. 3/8“ 9.525mm…………25mm…………9.525mm…………65mm. 5/16” 7.93mm…………22mm…… ... more7.93mm…………60mm.
$
1299.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
2X Fence baffle. 1X Sinal cable for A axis. Carving Instructions: G code / TAB files / nc file / NCC files. 2X cutter 2 6mm. 12X Aluminium fastener. 2X ... morecutter 3 6mm. Spindle precision:radial beat acuities 0.03mm.
$
394.25
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). With an effective engraving area of 400 ... more400 83mm, the machine can easily accommodate most projects.
$
964.96
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
The Z-axis uses Linear Rail instead of rods and T8 lead screw, this greatly improves the stability and accuracy. The 52mm clamp can accommodate the 60W ... morespindle, 300W spindle and the 20W/40W modules.
$
14.07
Buy It Now
$2.99 Shipping
Condition: New
Location: China
Applicable : 3# 4# Milling Machine. Suitable for most milling machines. For milling head turning. Model :B186+B189. Color Silver + Black.
$
249.00
Buy It Now
Free Shipping
Condition: New
Location: China
ER11 needs shrink fitting.
$
178.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: Nc/Jpg / Png / Tif / Bmp. 1 Box of ... more10cs Cutter(3.175mm). Communication Interface: Usb Port to Computer.
$
178.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Mode:3018pro Aluminum Upgrade Frame Materials: Aluminum Alloy and Pvc Panel Outer Dimension: 415x449x371mm Running Direction: X, Y, Z Axis Sliding Rods: ... moreX Rod: Dia 12mm, Y: Dia 10mm, Z: Dia 8mm Screw Driving Rod: Tr8-8 Steel Screw Rod Working Area: 300mm X180mm Features: Manual Knobs and Limit Switches for X, Y, Z Axis. On the Right Side of Frame, There Is a Emergency Button for Protection. Spindle Driller: Motor775 Stepper Motor:two Phase, 42 Stepper Motor Engraving File Format: Nc/Jpg / Png / Tif / Bmp Communication Interface: Usb Port to Computer. Application: Wood, Pvc, Mdf, Bamboo, Leather Operation Software: Grbl-candle,Popular Designing Software: Artcam, Carveco, Lightburn Pack Size: 53x45x30cm Pack Weight: About11.5kg Machine Color: Blue Package List: 1set.
$
179.06
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
This DIY CNC engraving machine is perfect for those seeking fun, learning, and researching opportunities. It effortlessly engraves various materials such ... moreas plastic, acrylic, PVC, PCB, and wood. Perfect for your endeavors and conveniently optimized for sale on.
$
1950.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
4Axis USB 1500W Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB Description: 6090 Router ... moreengraving machine parameters: Model: 6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A Driving Power for Stepping motor: AC110,.
$
1006.05
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1. This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. ... moreIt can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner.
$
178.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Running Direction: X, Y, Z Axis. Features: Manual Knobs and Limit Switches for X, Y, Z Axis. Engraving File Format: NC/JPG / PNG / TIF / BMP. 1 Box of ... more10cs Cutter(3.175mm). Communication Interface: USB Port to Computer.
$
394.25
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Package Included 1 Set* cutter 1* Z Probe 1* Right-Y-axis 1* U Disk 1* USB 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation.
$
1813.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
4Axis USB 1500W Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB Description: 6090 Router ... moreengraving machine parameters: Model: 6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A Driving Power for Stepping motor: AC110,.
$
1813.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Model:6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material:The whole machine used 6061 aluminum profiles ... moreMax. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws.
$
375.25
Buy It Now
$20.00 Shipping
Condition: New
Location: Chino, United States
Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). ... moreWide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
$
228.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts ... moreand crafts DIY Design (Note:No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
$
183.35
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Chuck type: Standard ER32 collet 3~20mm (Hollow shaft). 11 pcs complete set ER32 collet Axis: 80RPM. Your satis faction is our ultimate goal.
$
1850.70
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
USB Port HandWheel. The machine can connect with computer as other external device such as printer, scanner. Sliding unit:X axis:SFU1605 Ball Screws;Y ... moreaxis:SFU1605 Ball Screws;Z axis:SFU1204 Ball Screws.
$
416.75
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
Two phase 4.5A 86mm NEMA34 stepper motor. Stepper Motor. K12 100MM 4-jaw chuck. motor with VFD kits, servo motor and servo drive kits, stepper motor and ... morestepper drive kits, ball screw. Stepper motor.
$
34.20
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Specifications: Model : Automatic tool setting Color : Black + Silver Material: Grinding 4S+ superhard alloy Output mode: normally closed Normally closed ... morespecification technical parameters Output mode: BNC (normally closed) Pre-trip: almost zero Stroke: 5mm Repeatability: 0.001mm (condition: operating speed 50-200mm / min) Contact life: 3 million times Protection structure: IP67 Contact force: 1.5N Contact material: super hard alloy Housing material: grinding 4S Contact rating: DC24V 20mA (MAX) (recommended value 10mA) resistance load Cable: 3m oil resistant °4 core ∞5 tensile strength 307N minimum bending radius R7 Protection tube: minimum bending radius 1 m R25 Alarm signal when the trip is exceeded Output mode: BNC (normally closed) (2.5mm from the measurement signal).
$
945.00
Buy It Now
$1000.00 Shipping
Condition: New
Location: Leipzig, Germany
The spindle motor must connect with the VFD. VOLTS, current, power: AC220 /50Hz, 5A, 1.5KW VFD. The machine can connect with computeras other external ... moredevice such as printer, scanner. X axis---1605 Ball Screws.
$
291.98
Buy It Now
Free Shipping
Condition: New
Location: United States
Pulse orientation adopts differential output, maximum interpolation pulse output frequency 500KHZ. Open-collector output maximum output current 500mA, ... morecan drive relay directly. Acceleration and deceleration mode: S curve acceleration and deceleration.
$
2045.07
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Rahmenmaterial: Die gesamte Maschine verwendete 6061 Aluminiumprofile Max. Förderhöhe: ≤140mm (Von der Basis der Z-Achse zur Plattform) X, Y, Z Arbeitsbereich: ... more600x900x150mm Schiebeeinheit: X-Achse: SFU1605 Kugelgewindetriebe; Y-Achse: SFU1605 Kugelgewindetriebe; Z-Achse: SFU1204 Kugelgewindetriebe Antriebseinheit: X-Achse: ø20 Hochintensive Rundschiene, Y-Achse: hochfeste Aluminium-Basisschienen SBRø20; Z-Achse: ø12 hochfeste Rundschiene Schrittmotor: zweiphasig 3A (mit Handrädern) Antriebsleistung für Schrittmotor: AC110,240W, Ausgang DC24V10A Maximale Leerlaufdrehzahl: 1500mm / m Arbeitsgeschwindigkeit: 50-1500mm / min (unterschiedliches Material mit verschiedenen Geschwindigkeitseinstellungen) Spindelmotor: 2200W Hochgeschwindigkeits-Spindelmotor mit variabler Frequenz,.
$
178.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Package List: 1set 3018 pro 3 Axis Cnc Router Engraving Machine Kit (Without Laser) 1 Box of 10cs Cutter(3.175mm) 4pcs Plate Clamps 1 Power Cord 1 Usb ... moreCable 1 English Manual 1 Tool Setting Auto-check Instrument Z-probe Mode:3018pro Aluminum Upgrade Frame Materials: Aluminum Alloy and PVC Panel Outer Dimension: 415x449x371mm Running Direction: X, Y, Z Axis Sliding Rods: X Rod: Dia 12mm, Y: Dia 10mm, Z: Dia 8mm Screw Driving Rod: TR8-8 Steel Screw Rod Working Area: 300mm X180mm Features: Manual Knobs and Limit Switches for X, Y, Z Axis. On the Right Side of Frame, There Is a Emergency Button for Protection. Spindle Driller: Motor775 Stepper Motor:two Phase, 42 Stepper Motor Engraving File Format: NC/JPG / PNG / TIF / BMP Communication Interface: USB Port to Computer.
$
1813.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Model:6090GZ Outside dimension: 1150*970*650mm(L*W*H) Working platform size: 1045*720mm(L*W) Frame Material:The whole machine used 6061 aluminum profiles ... moreMax. Feeding height: ≤140mm(From base of Z axis to platform) X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws.
$
2239.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
2200W high-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur. Sliding unit: X axis:SFU1605 Ball Screws;Y axis:SFU1605 Ball Screws;Z ... moreaxis:SFU1204 Ball Screws. Drive unit: X axis:ø20 High intensity round rail,Y axis: SBRø20 high-strength aluminum base rails;Z axis: ø12 high-strength round rail.
$
1199.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Note: We Will Ship the Router Engraver from Our Us Warehouse, and the Controller We Provide Will Be Shipped from the Warehouse in China. Description: ... more1. This 6040t Machine Is Suitable for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It Can Work with Various Materials(Metallic & Non-metallic), Such As: Wood, Pmma or Other Plastic, Mdf Board, Native Wood, Pvc, Acrylic, Wood, Composite Board Plywood. and Soft Metal, like Aluminum, Copper and Silver to Engrave Them into 3d/2d Works Etc. 3.
$
166.48
19h 24m 11s
0 bids
$14.00 Shipping
Condition: New
Location: Chino, United States
Mode:3018pro Aluminum Upgrade. Spindle Driller: Motor775. Application: Wood, Pvc, Mdf, Bamboo, Leather. Running Direction: X, Y, Z Axis. Features: Manual ... moreKnobs and Limit Switches for X, Y, Z Axis. Engraving File Format: NC/JPG / PNG / TIF / BMP.
$
12.72
Buy It Now
Free Shipping
Condition: New
Location: China
1 CNC machine guard dust cloth. Type: CNC machine tool cover dust cloth. The real color of the item may be slightly different from the pictures shown ... moreon website caused by many factors such as brightness of your monitor and light brightness.
$
2239.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Sliding unit: X axis:SFU1605 Ball Screws;Y axis:SFU1605 Ball Screws;Z axis:SFU1204 Ball Screws. Drive unit: X axis:ø20 High intensity round rail,Y axis: ... moreSBRø20 high-strength aluminum base rails;Z axis: ø12 high-strength round rail.
$
178.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Mode:3018pro Aluminum Upgrade Frame Materials: Aluminum Alloy and PVC Panel Outer Dimension: 415x449x371mm Running Direction: X, Y, Z Axis Sliding Rods: ... moreX Rod: Dia 12mm, Y: Dia 10mm, Z: Dia 8mm Screw Driving Rod: TR8-8 Steel Screw Rod Working Area: 300mm X180mm Features: Manual Knobs and Limit Switches for X, Y, Z Axis. On the Right Side of Frame, There Is a Emergency Button for Protection. Spindle Driller: Motor775 Stepper Motor:two Phase, 42 Stepper Motor Engraving File Format: NC/JPG / PNG / TIF / BMP Communication Interface: USB Port to Computer. Application: Wood, Pvc, Mdf, Bamboo, Leather Operation Software: Grbl-candle,Popular Designing Software: Artcam, Carveco, Lightburn Pack Size: 53x45x30cm Pack Weight: About11.5kg Machine Color: Blue.
$
394.25
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Accurate engraving is not possible without an engraving machine. The starting, stopping, and flipping are done within a few pulses. It is suitable for ... moreindustrial technology, advertising design, art, educational programs, amateurs, architectural models, printed circuit boards, etc.
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
 In 

Former Listings  
 
BISON BT40 CNC 5/8" END MILL TOOL HOLDER BT 40
Used Bison BT40 5/8" end mill tool holder for CNC machine. See my other listings for more BT 40 tooling Ship weight 3-4 pounds.
Mitsubishi CNC Keyboad Unit FCUA-KB20
Mitsubishi CNC Keyboad Unit pic: 3586-89 loc: SR W2. Catalog Number: FCUA-KB20. Used. In great condition. FREE SHIPPING! AK. HI, PR: Free shipping for items via the Post Office. BUT, buyer pays actual shipping cost for items sent via UPS or Fed Ex. International buyers pay actual shipping charge(via the US Post Office) Payment: Paypal If you are the buyer of this item. Payment is expected within a five day period after purchase. If you are not able to send payment within this time frame, please contact me to make other arrangements, I am flexible. Warranty: All items are warrantied against D.O.A. it will work when it arrives) No warranty beyond that. I have made an honest and fair evaluation of this item. But I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to"make ... moreit right" Returns: I accept returns only for items under warranty- no returns for purchasing the incorrect item. Customer order changes, etc. Questions? 616-292-5579
SIEMENS CNC control MODULE 6SN1123-1AA00-0CA1
Please feel free to contact me with any questions or picture requests. I allow returns within 30 days of receiving the item for any reason. Domestic Shipping I ship anywhere within the United States. Although I require 3 business days for processing for my auctions. I will ship expedited if requested once payment has cleared. International Shipping International buyers please wait for me to send you a shipping invoice. If you want to know exact shipping charges before purchase then please feel free to ask for a quote. I will ship worldwide as long as there are no restrictions to your particular Country. I will not lie on customs forms and I am not responsible for taxes. Fees, or any other customs charges regarding your shipment. I will not ship until payment is processed. Keep in mind international shipping is quite slow, even if expedited. ... moreYour internationally shipped package may take several days to reach you. Embarque Internacional Los compradores internacionales por favor espéreme a enviarle una factura de embarque. Si usted quiere saber costes de embarque exactos antes de que la compra entonces por favor se sienta libre de pedir una cotización. Transportaré por todo el mundo mientras no hay ningunas restricciones a su País particular. No mentiré en formas de aduana y no soy responsable de impuestos. Honorarios, o ningún otro gasto de aduana en cuanto a su envío. No transportaré hasta que el pago sea tratado. Tenga presente que el embarque internacional es completamente lento, aun si aceleró. Su paquete internacionalmente transportado puede tomar varios días para alcanzarle. Expédition internationale Les acheteurs internationaux attendez-moi s'il vous plaît de vous envoyer une facture maritime. Si vous voulez savoir des charges maritimes exactes avant l'achat sentez-vous alors s'il vous plaît libres de demander une citation. J'expédierai dans le monde entier aussi longtemps qu'il n'y a aucune restriction à votre
LATHE DRILL OR CNC COLLETS
A SET OF 15 IMPERIAL COLLETS NOT REALY SURE OF THE CORRECT TYPE THOUGH THEY ALL HAVE THE SAME TRADE MARK SEE PICS THEY ARE CONE SHAPED SPRING FULL GRIP I THINK MARKED 3/64' 1/16' 3/32' 1/8' 5/32' 3/13' 7/32' 1/4' 9/32' 5/16' 11/32' 3/8' 13/32' 7/16' 15/32' IF ANYBODY OUT THERE CAN IDENTIFY THE TRADE MARK AND TYPE OF COLLET PLEASE LET ME KNOW WILL POST WORLD WIDE
Schneeberger linearrails, crossed caged roller kind. TNK, CNC, IKO, NSK actuator
This is a pair of ~10" long Schneeberger linear rails with 3" long carriages. They are used and have slight surface discoloration but are in perfect working condition. I have other automation and cnc components. take a look. Will ship to lower 48 states only.
AC servo motor, Sanyo Denky, 30W, BL Super Ip5. CNC automation stepper
Small Sanyo Denki AC servo motor. 2.8A. 30W. Length including shank is 4" Mounting plate size is 1.5" I have other automation and cnc components. take a look. Will ship to lower 48 states only.
CNC ready linear actuator with VEXTA stepper motor, rail ballscrew,THK NSK IKO
Linear actuator with 5 phase VEXTA stepper motor. Internal linear rails and ballscrew. Total length is 5.75" travel is slightly less that 1.5" Tested, working fine. I have other automation and cnc components. take a look. Will ship to lower 48 states only.
THK KR linear actuator with linear position encoder NSK IKO, CNC
This is a THK KR linear actuator with a 24V DC motor and a linear encoder with readout sensor. The actuator and motor are tested and work nicely. Travel is 3.5in. Total length 10.75" with is around 1.5" I have other automation and cnc components. take a look. Will ship to lower 48 states only.
Maxon, swiss made DC gear motor with optical encoder, CNC automation.
This is a maxon. Swiss made DC gear motor with optical encoder, CNC automation. It has a small mounting plate in the front, was tested and runs fine. I have other automation and cnc components. take a look. Will ship to lower 48 states only.
MITSUBISHI MAZAK MR-S11-103-E01 CNC SERVO DRIVE '
MITSUBISHI MAZAK MR-S11-103-E01 CNC SERVO DRIVE SERIAL# P0004641 RG10B-103 RG101C GUARANTEED NOT DOA Powered by The free listing tool. List your items fast and easy and manage your active items.
Robotic gripper CNC machining pick & place special SMC gripper used two only
This item is used. I have other similar also not listed here. As pictured. The item up for bid is identical to the picture. I invite requests for special parts. I have too much to list here and I produce custom parts daily. All messages will get quick responses. If you have a feedback of less than 20 you have to ask permission BEFORE placing a bid. Anyone from outside of the lower 48 states must request a total at the end of the auction. I WILL STAND BEHIND EVERYTHING I SELL. UNLESS IT IS MARKED(SOLD AS IS) I ACCEPT PAYPAL. I ALSO ACCEPT CASH IF. IN PERSON PICKUP. PAYMENT MUST BE RECEIVED WITHIN 5 DAYS OF END OF AUCTION. WHEN PAYING BY PAYPAL. YOU MUST HAVE A CONFIRMED ADDRESS. I DO NOT SHIP. TO P.O. BOXES. NO EXCEPTIONS. MOST EVERYTHING I SHIP GOES USPS PRIORITY. OR FLAT RATE USPS. I REQUIRE INSURANCE, IT IS INCLUDED IN SHIPPING CHARGE. ... moreI WILL ALWAYS LEAVE FEEDBACK TO THOSE WHO LEAVE ME FEEDBACK. I WANT TO THANK EVERYONE FOR LOOKING AT. AND OR BIDDING ON MY ITEMS. If you are NOT in the US( lower 48 states)you MUST request for a total before you pay. DISCLAIMER: Due to a recent situation I must enforce the following terms for the auction. If you do not agree to the listed terms DO NOT BID! Shipping insurance is required on all items. No Exceptions! Any compensation for lost. Damaged, missing, stolen, or delayed items will be the sole responsibility of the purchaser through the applicable shipping company and the insurance purchased. The seller will not provide refund or replacement items for any situation. There are No Exceptions. Proof of shipment documentation is available via email upon request. Electrical/electronic items will NOT be refunded or replaced. Hand made or custom items cannot be returned. Refunded, or replaced. Thank you for looking. Bid now before it's gone! Local buyers do NOT have to use PAYPAL!
CNC pallet 600mm from Mitsubishi M-H60 MH60
Good condition. Needs cleaned up. No damage or problems that I'm aware of. This was sent by mistake with a machine that I purchased. So I have never used it.
MAZAK CNC LATHE VDI 50 FACING TOOL HOLDER ST28/35N
MAZAK FACING TOOL HOLDER PAT NO. MI-22633 VDI 50 SHANK Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. FREE USPS Priority Mail shipping with signature confirmation* If you have any questions regarding this item. Please give us a call at 440-343-4419 and we will be happy to assist you. Thanks for looking!
EAGLE MODEL KR- V3000 3 AXES CNC VERTICAL MILLING MACHINE / ANILAM SERIES 1400
Up for Sale! EAGLE MODEL KR- V3000 3 AXES CNC VERTICAL MILLING MACHINE/ ANILAM SERIES 1400 MODEL# KV 3000. CONTROL ANILAM 1400 SERIES CONTROL TABLE SIZE 10" X 50" VARIABLE SPEED. LOW 80-520 HIGH 600-4000 RPM 3 PHASE 220 VOLTS. 5 HP. RPM 1415/ 1715. CALL. TEXT OR EMAIL WITH QUESTIONS. OCMACHINERY AT GMAIL.COM We can help with freight and local delivery.
SUPERMAX TC-2 CNC LATHE NEW 1995
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 SUPERMAX TC-2 TURNING CENTER S/N 510341 NEW 1995 SPECIFICATIONS: CHUCK SIZE: 8” TRAVELS: X AXIS: 5.9” Z AXIS: 19.68” SWING OVER BED: 18.89” SWING OVER CARRIAGE: 12.2” MAX. TURNING DIAMETER: 9.84” TAILSTOCK QUILL STROKE: 3.93” TAILSTOCK TAPER: 4 MT DISTANCE BETWEEN CENTERS: 19.68” SPINDLE SPEEDS: 4000 RPM SPINDLE MOTOR: 10 HP TURRET POSITIONS: 12 POSITIONS MACHNE DIMENSIONS: 92 x 62 x 80” h APPROXIMATE WEIGHT: 6000 LBS. ELECTRICS: 220/3/60. 45 AMPS EQUIPPED WITH: FLOOD COOLANT SYSTEM FULL ENCLOSURE SPLASH GUARD CHIP CONVEYOR FANUC 0TB CNC CONTROL PARTS CATCHER PRICE: F.O.B. SPRINGFIELD. MA Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 A video demonstration of the machine is available at: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f2eded85e-0x104-
P001 00450036 Fanuc Ikegai SSR OUtput Board from IKEGAI TU25 CNC Fanuc 10TF
P001 00450036 Fanuc Ikegai SSR OUtput Board. IKEGAI Made in Japan Removed in Working Conditino from IKEGAI TU25 CNC LATHE WORKING WITH Fanuc 10 TF. Happy bidding. We sell items in As it is Condition as pictured without Warranty We are NOT responsible for any TAXES/ Custom charges etc. this is buyer responsibility. Payment: Within 3 Days of purchase. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f2ef7d161-0xff-
Collis 2x3 Morse Taper Extenion/Adapter #60723 F2 Drill Mill CNC Bridgeport
Collis 2x3 Morse taper extension/adapter. The female is a#2 Morse Taper and the male is#3 Morse Taper. This measures 10" overall. It's used but was barely used and shows little to no signs of wear.
Machinists 6/9B BUY NOW (12) HAAS CNC Reference Guide
See Pic 48 Pages Cheap Shipping ``````````````````````````````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're ... morenot stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram i
Amada Aries 245 CNC punching machine
ARIES 245. MAX. 20 TON, TURRET PUNCH TURRET STYLE: THICK AXIS DISTANCE: 36" X 50" MAX WORKABLE SHEET SIZE(W/AUTO REPOSITIONING) 36" X 100" MAX SHEET WEIGHT: 110LB 20 STATION- 2 AUTO-INDEX 9 X 1/2" 6 X 1 1/4" 1 X 2" 2 X 3 1/2" AUTO INDEX 2 X 1 1/4" MAX SHEET THICKNESS: 7 GAUGE MILD STEEL TURRET SPEED: 20 RPM NIBBLING HITS PER MINUTE: 300 SPM MAX HIT RATE: 180 HPM CLUTCH/ BRAKE TYPE: HYDRAULIC BALL TRANSFER TABLE ELECTRICAL: 240/3 PHASE- 440/3 PHASE APPROX. DIMENSIONS: 149" X 104" X 77" WEIGHT 21.500LBS This machine have problem with y-axis servo unit
Motor DC Gear Transmission CNC Toy Model Robot DIY steampunk industrial art
Up for bidding is a Motor Gear Transmission CNC Toy Model Robot DIY steampunk industrial art. used. ex-USSR made. DC motor 12V. m etal/ p lastic gears& housing. could be used for animating holiday project or light duty self propelled project. please look at all pictures closely to be sure this will work for your application. selling As Is No Returns. scales is not included.
#2 Motorized Gear CNC Toy Model Robot DIY steampunk industrial art
Up for bidding is a#2 Motorized Gear CNC Toy Model Robot DIY steampunk altered art. used. ex-USSR made. parts of an aircraft/ avia equipment. t wo-phase induction motor DID-05 27 V/400Hz. scales is not included. Motor DID-0. 5 DID-0. 5 The maximum shaft power: 0.5 W Starting torque. Maximum: 7.0 g• cm Starting current excitation. No more than 155mA Inrush current, max: 135mA Speed: 14000ob/min Diameter: 22.2 mm Length: 41.4 mm Weight: 0.05 Kg Voltage excitation circuit: 36V Control circuit voltage: 30V Frequency: 400Hz DID-0. 5U: The maximum shaft power: 0.5 W Starting torque. Maximum: 7.0 g• cm Starting current excitation. Max 90mA Inrush current, max: 150mA Speed: 14000ob/min Diameter: 22.2 mm Length: 41.4 mm Weight: 0.05 Kg Voltage excitation circuit: 36V Control circuit voltage: 30V Frequency: 400Hz Characteristic: Two-phase induction ... moremotors DID s are designed to work in reverse-inertia drives aviation automation. Designed to operate in a mode of high rigidity.
Synchronous Electric motor 220 V with Gear Box CNC Toy Model Robot DIY steampunk
Up for bidding is a Synchronous Electric motor 220 V with Gear Box CNC Toy Model Robot DIY. ex-Czechoslovakia made. 1 variable 8-stage/ 1 constant reduction gears. Synchronous Electric motor 220 V. 50 HZ, 4 W, I speed is 1 turn p/ 3 min. 8 motion speed are available) all numbers are approximative. scales is not included
Steel Shaft Axis Rod Cone Worm Gear CNC Toy Model Robot DIY steampunk industrial
Up for bidding is a Steel Shaft Axis Rod Cone Worm Gear CNC Toy Model Robot DIY steampunk industrial art. used. turns ratio is 1:7. Short axis makes 7 turns clockwise/ long axis makes 1 turn clockwise. long axis does not have idle rotation( presumably a worm gear is used) could be used for animating holiday project or light duty self propelled project. scales is not included
Gear Geared Mechanical CNC Toy Model Robot Steampunk Industrial Art Part for DIY
Gear Geared Mechanical CNC Toy Model Robot Steampunk Industrial Art Part for DIY. scales is not included. see pictures for details
Motorized Induction Motor Gear CNC Toy Model Robot DIY steampunk altered art
Up for bidding is a Motorized Induction Motor Gear CNC Toy Model Robot DIY steampunk altered art. used. ex-USSR made. parts of an aircraft/ avi onic equipment. t wo-phase induction motor DID-05 27 V/400Hz. scales is not included. Motor DID-0. 5 DID-0. 5 The maximum shaft power: 0.5 W Starting torque. Maximum: 7.0 g• cm Starting current excitation. No more than 155mA Inrush current, max: 135mA Speed: 14000ob/min Diameter: 22.2 mm Length: 41.4 mm Weight: 0.05 Kg Voltage excitation circuit: 36V Control circuit voltage: 30V Frequency: 400Hz DID-0. 5U: The maximum shaft power: 0.5 W Starting torque. Maximum: 7.0 g• cm Starting current excitation. Max 90mA Inrush current, max: 150mA Speed: 14000ob/min Diameter: 22.2 mm Length: 41.4 mm Weight: 0.05 Kg Voltage excitation circuit: 36V Control circuit voltage: 30V Frequency: 400Hz Characteristic: Two-phase ... moreinduction motors DID s are designed to work in reverse-inertia drives aviation automation. Designed to operate in a mode of high rigidity.
2 Steel Shaft Axis Rod 6 Gear CNC Toy Model Robot Part DIY steampunk altered art
Up for bidding are 2 Steel Shaft Axis Rod 6 Gear CNC Toy Model Robot Part DIY steampunk altered art. used. good condition. steel/ bronze/ aluminum/ non-magnetic. see photos for details. scales is not included. Please ask your questions before bidding.
Hiwin LG15 Linear Slide CNC
Hiwin LG15 Linear Slide CNC. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: Hiwin LG15 Linear Slide CNC Overall: 14 x 7 1/2 x 3 1/2 Inches. Plate: 7 1/2 x 6 1/2 x 1. I accept Paypal or Check. I ship by UP S or USPS. Posted with
(2) THK KR45x440mm Linear LM Bearing Precision Ballscrew Actuator XY Stage - CNC
Custom THK KR4505x440 Dual Slide LM Guide Linear Ballscrew Actuator w/ 1-1/2" Thick Stainless Steel Table, Precision Ground Ballscrew& Motor Mount This is a lightly used custom THK KR45 linear actuator that was removed from a prototype fixture. It is in excellent condition. It consists of(2) separate THK KR45 x440mm slides that are connected with a 1-1/2" thick machined stainless steel plate. One of the actuators has a precision ground ballscrew that is 16mm dia. x 5mm pitch and is coated with black epoxy for corrosion protection. The other actuator is for support only and does not have a ballscrew. Both actuators have(2) long block carriages(4 carriages total) and the metal plate is attached to each carriage with(4) stainless steel bolts. The actuator with the ballscrew also has a motor mount and the output shaft of the ballscrew ... moreis 10mm diameter. This is a very heavy-duty set up with a very high load capacity and very high accuracy. Max travel is approx. 195mm(7-3/4" The table measures approx. 8-3/4" wide x 8-7/8" long. Total weight of entire assembly is 49lbs 2ozs: SS Plate = 20lbs 0ozs. KR45 w/ Ballscrew = 15lbs 12oz, KR45 Slide = 13lbs 6oz*I have several more of these THK KR45 dual-slide actuator assemblies which are New that I will be listing separately, please see my other listings for more info* Shipping rate applies to lower 48 States only. International bidders please contact me for a shipping quote before placing a bid.
CNC Optics System Linear Way Motion Rails +GEC Servo Motor + 2 CCD Video Camera
SquareTrade © AP6.0 CNC Optics System Linear Way Motion Rails +GEC Servo Motor + 2 CCD Video Camera You are bidding on Used: CNC Optics System Linear Way Motion Rails +GEC Servo Motor + 2 CCD Video Camera CNC Optics System Linear Stage Motion Rails + Servo Motor(GEC Alsthom RS220F) + 2x Sony XC-77CE CCD Video Cameras + TAMRON CCTV Lens 1:1.6/ 25MM 25.5 + RSF-Elektronik S 46 + VAD-M5 Festo Vacuum generator Total length: ~88cm/ 34.645" Rail Length: ~68cm/ 26.771" Motion Length: ~68cm/ 26.771" Total weight: ~27Kg/ ~60LBS You can get some more ideas for its uses. Here: http:davidhunt.ie/page_id=232 This item is for sale as is. My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied ... morewith your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. B
Cincinnati Milacron Maxim 500 Series AM Acramatic 950MC CNC Parts Service Manual
Our internal inventory number on this product is LHM13# MN43-O. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Cincinnati Milacron Parts and Service Manual. Maxium 500 Series Horizontal Machining Center with Model AM with Acramatic 950 MC Computer Numerical Control, Software Release 3.0, Volume 1 of 2. Table of Contents: 1. General Safety 2. Description and Specifications. ... more3. Hydraulics 4. Electrical 5. Lubrication 6. Coolant and Pheumatics 7. Side Drives(X.Y,Z, B) 8. Automatic Work Changer 9. Spindle Carrier 10. Tool Storage Publication Number: 23-F1-93007. Weight: 3 lbs. Dimensions: 9.75" x 11" x 1" Copyright: 1993 It is(+/ 300 Pages. Seems complete and in generally GOOD used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $3.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $5.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPAN
FANUC AC SERVO MOTOR A06B-0532-B501 RED CAP CNC
FANUC AC SERVO MOTOR A06B-0532-B501 LOOKS GREAT SEE PICS PULLED USED FROM WORKING ROBOT INVENTORY LOCATION:
MCLEAN MIDWEST CLIMATE CONTROL FOR ELECTRICAL CABINETS / ENCLOSURES / CNC
MCLEAN MIDWEST CLIMATE CONTROL FOR ELECTRICAL ENCLOSURES. CNC ETC. USES 115 VAC, WORKED WELL, COULD USE A GOOD CLEANING. IT CAME FROM A MILLTRONICS CNC MILLING MACHINE THAT I PARTED OUT.
Redcat Racing TORNADO S30 Nitro Maxed out with CNC suspension
For auction is a Redcat Racing Tornado S30. It's in good condition and has about three quarts of fuel ran through it. I'm getting back into helicopters so I don't need all my other toys I have setting around. With the dogbone upgrades on this buggy you can't loose a dogbone ever. I've upgraded it with all most every CNC Aluminum part you can get. Auction INCLUDES electric starter kit which really makes it easy. If you have any questions please ask. I'm selling this as is with no warranty because of the type vehicle it is. It starts every time without adjusting carb and will set and idle great. INCLUDES Factory radio. It has the following CNC parts. Blue billet Aluminum rear lower arms $40 Blue billet Aluminum Front Lower Arms $38 Blue billet Aluminum Front Upper Arms $32.48 Blue billet aluminum Front Steering Knuckles ... more$29.99 Blue billet aluminum Rear Hub carriers $29.99 Blue billet Aluminum Rear Shock Tower $24.00 Blue billet Aluminum Front Shock Tower $23.20 Steel Front/Rear CVD's all four dog bones $41.99 Blue capped aluminum air filter $15.99 Electic starter kit $60.00
Hitachi Seiki 16-02-00-03 193-230392 NUMC CNC Board (No ROM Chips) [PZ7]
ITEM DESCRIPTION. Condition: Refurbished Precision Zone technicians are experts when it comes to electronic repair. In addition to replacing components. We can diagnose and make repairs at board level. All repaired electronics and printed circuit boards are thouroghly tested in simulator stands and real machines, cleaned and repackaged according to your request. Also we implement the entire NC control rack repair. This item carries Precision Zone standard 90 day Ebay warranty on parts and labor from date of its sale. Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA inspection. NET Terms available to customers of satisfactory credit after approval. To avoid delay in filling ... moreorders. Purchasers without previous experience with Seller should remit cash, PayPal, or pay with VISA/MasterCard. Customers may be subject to Illinois sales tax. Repair Services Turnaround Time. Standard repair lead time is 5-10 business days after approval. Rush services are available. Ranging from same day to 72 hour rush. Please contact us for pricing and availability on rush repair services. Exchange program available with a wide range of drives on hand at any given time. Same day rush services also available on exchanges. Packaging and Handling. All items are custom packaged to ensure proper safety of unit(s) Items above 80lbs require custom shipping cartons for protection. Customers responsible for additional freight charges. Shipping. Free Domestic(Mainland U.S.A. Excluding Alaska and Hawaii) Shipments: All domestic shipments under 70 lbs are processed via free UPS Ground Service. Domestic shipments over 70 lbs are processed via freight service. Freight and handling fees apply. Contact us for additional freight charges. Alaska. Hawaii and International Shipments: We ship worldwide from Illinois. USA using UPS, FEDEX, DHL, or Truck Freight when needed. Call to use
FANUC 16 18 CNC CONTROL RACK
UP FOR AUCTION IS A NICE FANUC CNC CONTROL RACK. IN EXCELENT CONDITION. IT CAN BE SPLIT INTO 3 SMALLER RACKS. GUARANTEED NOT TO BE DOA. FEEL FREE TO EMAIL WITH ANY QUESTIONS. COMES AS PICTURED. UNIT HAS ALL FANS ALSO.
8000-MP6AZ 8200 CONTROL PANEL MEMBRANE CNC MILL ALLEN BRADLEY
LISTED IS A NICE ALLEN BRADLEY 8200 CONTROL PANEL IN VERY NICE OVERALL CONDITION. PART NUMBER IS 8000-MP6AZ. MIGHT BE MISSING A BOARD ON THE BACK FOR THE KEAYBOARD INPUTS. FEEL FREE TO ASK ANY QUESTIONS.
Lasag Laser Processing Machine LPM 302 Nd:YAG cutting drilling CNC 300 W 1064nm
Lasag Laser Processing Machine model LPM 302/ Nd:YAG Laser machining system/ Rated 300 watts@ 1064nm laser/ mfd. Sept. 1985/ 31597 hours use/ 380V. 3 phase, 60 Hz, 16 KVA/ System is capable of cutting, drilling, material removal, scribing, and engraving metallic or nonmetallic materials. System is also capable of seam or spot welding of metals. The CNC control can be used with up to 4 axes to process work pieces in linear or circular interpolation. System is completely integrated with pulsed Nd:YAG laser and CNC positioning system with enclosure. Some specs. are as follows: YAG laser source: Lasag KLS 321, System is equipped with: CNC control unit NUM 570 mfd. by Telemecanique interfaced with BobCad software. System has XY travel of 220 mm x 370 mm stroke. Z axis of 300 mm and is equipped with CNC rotary chuck. Process can be viewed by monitor/ ... moreSystem includes computer with BobCad interface, manuals, spare parts, etc/ We have had the laser pulsing and the CNC tables moving, however not in unison. When we initialize the table, the system closes the shutter and shuts the laser off. It may be an interlock that is not satisfied. This is why the system is listed as"parts or not working" Unit is being sold in as-is, where-is, as described above condition with no returns/ Buyer is responsible for all crating, shipping, and insurance charges. Please feel free to contact us with any further questions. We have more pictures, spec. sheets, etc. available upon request. Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options.
BIG/DAISHOWA COLLET HOLDERS BABY CHUCK MODEL *10 PCS* CNC
BIG/DAISHOWA COLLET CHUCKS BABY CHUCK MODEL LOT OF 10#SL20-NBS10-08 DRILL HOLDERS HIGH ACCURACY MODEL INCLUDES 3 NEW HOLDERS AND 7 USED VARIOUS LENGTH SHANKS. AND 2 W/O COLLET NUTS ALL SHANK SIZES ARE 20MM SAMPLE COLLET INCLUDED $12.50 S&H
Lot of (2) QPhase Optical Encoders for 1/4" Shaft - CNC DIY Servo Motor Control
Lot of(2) Q-Phase Optical Encoders 1024 Line Resolution. 1/4" bore, 1.812" Bolt Circle Mounting These are used encoders that were removed from working equipment and are in excellent condition. Features: 500 kHz Fundamental Frequency Response• Low profile. 0.87” assembled height• Bearing design simplifies encoder attachment• Resolutions up to 5000 lines per revolution direct read• 4. 6 or 8 pole commutation• Conductive carbon fiber housing• Standard 1.812” Bolt Circle mounting• Through shaft sizes up to 0.375” Diameter• High Noise Immunity• Cost Competitive with Modular Encoders You can website below for additional info: Shipping rate applies to US only(includes Alaska& Hawaii) International bidders please contact me for a shipping quote before placing a bid. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f32ff4778-0xec-
Kennametal KV45 ETAL 16H CNC Toolholder, Used
You are bidding on(1) Used Kennametal KV45 ETAL 16H CNC Toolholder for a Hitachi Seiki CNC Lathe. If you have any questions please email them. I will combine shipping whenever possible.
(3) Haas SL-20 CNC Toolholders, 1" Boring, 1/2" Boring & 1" Turning, Used
You are bidding on(3) Used Haas toolholders from an SL-20 CNC Lathe. They are in very good condition. I will combine shipping with my other auctions whenever possible. 1" Boring Bar Holder 1/2" Boring Bar Holder 1" Turning Holder
NEW! HARDINGE ROUND SHANK BLANK OFFSET HOLDER FOR GT27 CNC LATHES
aims NEW! HARDINGE ROUND SHANK BLANK OFFSET HOLDER FOR GT27 CNC LATHES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge. This is a NEW Round Shank Offset Drill Tool Holder for Hardinge GT27 CNC Lathes. Model# HG-5B Part# HG-8258-V The round shank blank offset allow the user to bore them out for special holder or tool shanks. The holder has a thumb screw which is used to hold a tool tag that identifies the offset used for this particular tool holder. Dimensions: 4.15" x 2.73" x 1.65" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category ... moreby visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NEW! HARDINGE ROUND SHANK BLANK OFFSET HOLDER FOR GT27 CNC LATHES NEW! HARDINGE ROUND SHANK BLANK OFFSET HOLDER FOR GT27 CNC LATHES NEW! HARDINGE ROUND SHANK BLANK OFFSET HOLDER FOR GT27 CNC LATHES Reliable Tool Inc. c 2011 | Powered by
USED WTO CNC LIVE ER40 COLLET CHUCK RIGHT ANGLE TOOL 410526014-60 T32214 ER-40
LISTING IS FOR A USED WTO CNC LIVE ER40 COLLET CHUCK RIGHT ANGLE TOOL BRAND- WTO TYPE- 410526014-60 S/N- K08-00322-2.4 T32214 ER-40 LIVE TOOL MADE IN GERMANY CONDITION- VERY GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, ... moreMASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTI
Sandvik CNC CAT 50 Face End Mill Indexable Tool Holder CAT50
SEARCH OUR PRODUCTS Sandvik CNC CAT 50 Face End Mill Indexable Tool Holder CAT50 Product Description You are bidding on a used Sandvik CNC CAT50 Face End Mill Indexable Tool Holder. This item has not been tested since we do not have the proper resources. The tool has a tip broken off. As shown in the pictures. It has scratches, light surface rust spots and is slightly worn from normal use. The pictures below are the actual item the winning bidder will receive. Only what is pictured comes with this auction. Items Included: 1- Sandvik. End Mill Tool Holder 1- Face Mill Indexable Tool 1- Retention Knob Specifications: Holder/Shank: CAT 50. Projection: 4" V-Flange, 50MM-VF4.000-EM10 Tool: 6 Inserts. Face Mill, Approximate Dia. 2-9/16" Retention Knob: 60 Degree. 63 SKU: I06L018 Warranty Information Warranty covers defects and malfunctions ... morethat we have not described. The warranty period starts the day the item is delivered to your shipping address. Warranty does not cover compatibility issues. Consumable parts or software. Contact Info Business Hours- toll free: 877) 328-9236- local: 512) 933-0081- fax: 512)873-0745 Monday to Friday from 8:30 am to 5:30 pm CST Closed on Saturday and Sunday Company Policies PayPal Must ship to a confirmed address, Visa/MasterCard/Discover/Amex US and Canadian issued cards only. Must ship to the billing address of the credit card. Orders over $1.000 require a signed. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. We do not allow the buyer to arrange their own shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. The buyer is responsible for any customs. Duties, taxes, broker fees, etc that are incurred. We do not know what these fees are and have no way to calculate them. You will need to speak to your local customs office if you have ques
Fitz Rite CNC CAT CAT 50 End Mill Tool Holder & Tool
SEARCH OUR PRODUCTS Fitz Rite CNC CAT CAT 50 End Mill Tool Holder& Tool Product Description You are bidding on a used Fitz Rite CNC CAT CAT 50 End Mill Tool Holder& Tool. This item was not tested since we do not have the proper resources. Cosmetically it has worn marks and scratches from normal use. The pictures are of the actual items the winning bidder will receive. Only what is pictured comes with this auction. ITEMS INCLUDED: 1- TOOL HOLDER 1- END MILL TOOL 1- RETENTION KNOB SPECIFICATIONS OF HOLDER: MANUFACTURER: FITZ RITE TFI T-112007 07/02 TAPER: CAT50 PROJECTION: 1.5" THRU-THE-SPINDLE-COOLANT CAPABILITY SPECIFICATIONS OF TOOL: MANUFACTURER: UNKNOWN DIAMETER OF CUTTING END: ~1.9" DIAMETER OF TOOL SHAFT: 1.5" LENGTH(AS SEEN) 5-1/4" SPECIFICATIONS OF RETENTION KNOB: MANUFACTURER: UNKNOWN THRU-THE-SPINDLE-COOLANT-HOLE ... moreSKU: I47L011 Warranty Information Warranty covers defects and malfunctions that we have not described. The warranty period starts the day the item is delivered to your shipping address. Warranty does not cover compatibility issues. Consumable parts or software. Contact Info Business Hours- toll free: 877) 328-9236- local: 512) 933-0081- fax: 512)873-0745 Monday to Friday from 8:30 am to 5:30 pm CST Closed on Saturday and Sunday Company Policies PayPal Must ship to a confirmed address, Visa/MasterCard/Discover/Amex US and Canadian issued cards only. Must ship to the billing address of the credit card. Orders over $1.000 require a signed. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. We do not allow the buyer to arrange their own shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. The buyer is responsible for any customs. Duties, taxes, broker fees, etc that are incurred. We do not know what these fees are and have no way to calculate t
Fitz Rite CNC CAT50 CAT 50 End Mill Tool Holder & Tool
SEARCH OUR PRODUCTS Fitz Rite CNC CAT50 CAT 50 End Mill Tool Holder& Tool Product Description You are bidding on a used Fitz Rite CNC CAT CAT 50 End Mill Tool Holder& Tool. This item was not tested since we do not have the proper resources. One of the"inserts" blades got chipped in storage/handling(see last image) Cosmetically it has worn marks and scratches from normal use. The pictures are of the actual items the winning bidder will receive. Only what is pictured comes with this auction. ITEMS INCLUDED: 1- TOOL HOLDER 1- END MILL TOOL 1- RETENTION KNOB SPECIFICATIONS OF HOLDER: MANUFACTURER: FITZ RITE TFI T-112007 07/02 TAPER: CAT50 PROJECTION: 1.5" THRU-THE-SPINDLE-COOLANT CAPABILITY SPECIFICATIONS OF TOOL: MANUFACTURER: UNKNOWN DIAMETER OF CUTTING END: ~1.9" DIAMETER OF TOOL SHAFT: 1.5" LENGTH(AS SEEN) ... more5-1/4" SPECIFICATIONS OF RETENTION KNOB: MANUFACTURER: UNKNOWN THRU-THE-SPINDLE-COOLANT-HOLE SKU: I47L012 Warranty Information Warranty covers defects and malfunctions that we have not described. The warranty period starts the day the item is delivered to your shipping address. Warranty does not cover compatibility issues. Consumable parts or software. Contact Info Business Hours- toll free: 877) 328-9236- local: 512) 933-0081- fax: 512)873-0745 Monday to Friday from 8:30 am to 5:30 pm CST Closed on Saturday and Sunday Company Policies PayPal Must ship to a confirmed address, Visa/MasterCard/Discover/Amex US and Canadian issued cards only. Must ship to the billing address of the credit card. Orders over $1.000 require a signed. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. We do not allow the buyer to arrange their own shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. The buyer is responsible for any customs. Duties, taxes, broker fees, e
CHNC Hardinge CNC Lathe Model CHNC 16C
This is a Used Hardinge CHNC 16C Model CNC Lathe Non Working. For Parts. This would make a great retrofit project. Does not have the original control, or motors, or spindle motor, they were removed. Machine sold" As Is Where Is" Any questions please call Jerry Kohler 503-998-0985 Shipping Shipping is the responsibility of the buyer; however. We have a network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Payment Wire Transfers and Direct Deposits. Are the preferred method of payment for purchases over $5.000.00, but can be made on any amount. Please contact jerry@cncbyamr.com for Wire instructions. Cashiers Checks and Money Orders. For Purchases ... moreover $1.000.00 are to be sent overnight, via priority mail, FedEx or UPS and tracking number confirmation emailed to: jerry@cncbyamr.com Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. And a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment.
Supermax ycm tc-2 cnc lathe machine with bar feeder all manuals
Supermax cnc lathe with spego turnamic bar feeder. Machine is a YCM TC-2 model. comes with all the operators manuals. comes with a bar feeder. Unit came from a working shop. We where told the last owner needed room so they discounted the bar feeder. After that the machine then got a error code for the bar feeder. We where told that the control needs to be reset to run with out the barfeeder or the bar feeder needs reconnected. So where are selling it as is with no returns or refunds please verify all you need to know first.
Engraving Machine - CNC Machine - Signature Engraver 8080 Plus - Extras
Description We have a Signature 8080 Plus Engraving system for sale with updated software and extra features. This 8080 Plus Signature Engraving Machine was purchased in early 2000's. And has been kept in good working condition. We have recently upgraded the computer and engraving software so you will have a reliable system running modern software and hardware. We have also kept the old computer and software for backup which will be included in this package. This system can engrave very unique items because of the size and flexibility of the machine. Examples of unique items: Riffle Stock. Large Crystal Bowls, Wood Picture Frame, Swords, and much more. The updated software CD will come with this package with updated training videos and manuals. We will provide the original training binders and information. Also we will provide our own ... morehelpful hints and tips that we have learned over the years. These machines new are over $30.000.00. You will be saving a lot of money by purchasing from us. Signature Engraver has produced new tools and attachments over the years that you can check out at their website. We also recommend that you sign up for their extended service and support plan while you learn and start with your new engraver. Items included in this package: Engraving Machine: Model# 8080 Plus- 16 x 8 in engraving area( really depends on what you are trying to engrave. We haven't had to turn away to many items because the machine is so large it can fit most items a jeweler might encounter) The machine is open so you can fit larger object in this machine that extend out past the engraving threshold. The spindle Head is adjustable as well to allow different height configuration so you can hold unique items like bowls and dome shape objects. Refurbish Dell Computer– Running Windows XP–The updated Signature Windows XP Software Package( updated from the original MS Dos Program– The XP program is much easier to use) This computer comes with windows restore CD& Windows Office Suite. Signatures updated
PARLEC BT40 7/8" END MILL TOOL HOLDER MORE LISTED BT 40 CNC MILL LOT C2438
SquareTrade © AP6.0 LOT# C2438 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A PARLEC BT40 7/8" DIA. END MILL TOOL HOLDER Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f338633a9-0xb7-
L81 - Lot 2 pcs BT 50 Tool Holders NIKKEN mill end milling CNC chuck boring
L81 2 pcs BT 50 Tool Holders 1. Nikken 5/8 2. Nikken 3/4 Huge Tooling Auctions- Over 60 Lots This Week- Must Sell- Make US OFFERS Shipping is only $15 Please Check out our other Great Ebay Deals on Tooling- HUGE TOOLING SALE
L82 - Lot 2 pcs BT 50 Tool Holders NIKKEN mill end milling CNC chuck boring
L82 2 pcs BT 50 Tool Holders 1. Nikken 3/8 2. Nikken FMD25 Huge Tooling Auctions- Over 60 Lots This Week- Must Sell- Make US OFFERS Shipping is only $15 Please Check out our other Great Ebay Deals on Tooling- HUGE TOOLING SALE
BT-40 CNC MACHINING CENTER ER-32 COLLET CHUCK FROM COMMAND #1
This auction is for one BT-40 toolholder. It is a collet chuck for ER-32 collets from Command. The toolholder is in good used condition. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.35. Use the shipping calculator for all international addresses. I have multiple tool holders up for auction. I will ship up to five BT40 tool holders for this one shipping charge. If you purchase any of my listings. I will combine shipping on any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping, commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win the auction for multiple items. Ask for an invoice rather than pay right away. I will adjust the ... moreshipping charges and send out an invoice. See my listings for: Sunnen hone tooling; Hardinge lathe parts& tooling; other machine shop tooling; marine& outboard motor parts and manuals; Muskie fishing lures; Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s. Mad Magazines and paperback books from the 60’s& 70’s and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
BT-35 CNC MACHINING CENTER SMALL SHELL MILL ARBOR #2
This auction is for one BT-35 small shell mill adapter. It has a 1" diameter center spud and 3/8" wide keys.The tool holder is in good used condition. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.35. Use the shipping calculator for all international addresses. If you purchase any of my other listings. I will combine shipping on any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping, commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win the auction for multiple items. Ask for an invoice rather than pay right away. I will adjust the shipping charges and send out an invoice. See my listings for: Sunnen hone tooling; ... moreHardinge lathe parts& tooling; other machine shop tooling; marine& outboard motor parts and manuals; Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s. Mad Magazines and paperback books from the 60’s&b 70’s and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
Mazak VTC16B CNC
Very lightly used with tool measurement and lots of tools. Only about 13k hours. Holds tolerances within.0002 Also have two 8" Kurt vises and other tools.
CHICK QL4 CNC MILLING VICE
CHICK VICE IS BRAND NEW NEVER USED. This vice is 4" wide and with the center section removed. Will hold a 6.5" part. With the center section in, two parts up to 2" can be gripped at the same time. There is a 1/2 socket head hole for an allen wrench for fast closing. Weighs 25 lbs.
Renishaw NC4 non-contact laser tool setter CNC Mill breakage -not a probe
This Renishaw system was in good working condition when removed from the machine. Nci-4 interface included. This system has a"air blast" to remove coolant from the laser face. The filter kit is not included in the auction. We pulled this out of the machine due to adding a rotary. We do not have room on the table for the tool setter. Per Renishaw's website- Tool measurement and broken tool detection anywhere along the beam. The NC4 allows fast. Non contact tool setting and tool breakage detection on a variety of machining centres. Available as fixed system and separate system variants, the NC4 incorporates the unique MicroHole™ protection system and the innovative failsafe PassiveSeal™, maintaining IPX8 environmental protection. With all NC4 systems. Precision optics are supplied as standard. These enable the compact series to ... moreachieve unsurpassed performance in a unit particularly suited to small machines and machines where space is at a premium. NC4+ key benefits• Excellent tool to tool accuracy. Suitable for applications using small diameter tools. System features• Compact design Ø30 mm x 35 mm high. Typical repeatability ±0.1 μm 2σ. ✸• Measurement of tools and detection of broken tools Ø0.03 mm and larger. ✸• If the air is switched off. The PassiveSeal™ failsafe sealing device prevents contamination, maintaining IPX8 protection. Stainless steel body– resistant to the hostile machining environment. Proven MicroHole™ technology– no moving parts. Single conduit exit from product– electrical and pneumatic cables enter via single conduit. Measurement of tool length and diameter at normal spindle cutting speeds. Drip rejection mode– rejects signals from random drops of coolant falling through the beam. Up to 5 m separation(separate system only) Modular and compact fixed systems– 95 mm to 300 mm overall length. Other ranges available on request. ✸ dependent on system. Separation and mounting.
Transformer for CNC Lathe
Power Transformer removed from a Takisawa CNC Lathe. Item is in excellent used condition and was working perfectly when removed.
42" x 98" Mori-Seiki LL7 Heavy Duty CNC Lathe with Fanuc 0T Control
Machine in beautiful running condition. Used for aerospace type work. If you have any questions. Please call Rich at 760-633-4801 MAKE: MORI-SEIKI MODEL: LL-7A/ 2500 CONTROL: FANUC OT RETROFITTED EARLY 90’s A VERY NICE ACCURATE MACHINE. OFERATOR SAYS HE HOLDS TENTHS. SWING OVER BED: 42.9” SWING OVER CROSS SLIDE: 20” DISTANCE BETWEEN CENTERS: 98.5” SPINDLE SPEEDS: 1150 RPM SPINDLE HOLE: 4.1” MAIN MOTOR: 50 HP TURRETS: 2) 4 O.D/ 4 I.D. POSITION PROGRAMMABLE TURRETS INCLUDES: TAILSTOCK· 24” 4-JAW CHUCK· 40” 8-JAW CHUCK· COOLANT SYSTEM· SPLASH GUARDS· HIGH/LOW RANGE· CHIP CONVEYOR APPROX. WEIGHT: 25.300 LBS MACHINE IN BEAUTIFUL CONDITION. UNDER POWER IN WEST COAST PLANT. CLICK ON LINK TO VIEW VIDEO http:www.surplusmachines.com/lt/201963.htm
6 used printer carriage dc motors for hobby diy cnc project motors
Additional Images maybe found at this link Photobucket/ Item: 6 used printer carriage dc motors for hobby diy cnc Item: 6 used 2.4- 42vdc motors from Printer Carriages DC RS-455PA-15200: 2x |Mabuchi Motor | 12– 42V operating range | 330 mA peak efficiency. N3657-250-GHFVP: 1x |igarashi | 2.4-48V operating range. QH4-4431/ TD882420: 1x Unknown Motor with White Gear Head: 1x | From Scanner Unknown Motor with Black Planetary Gear Head: 1x | From Electric Screwdriver Condition: Used. Tested good. Please read carefully. Especially the section on Payment and Shipping. Sale is final! You will receive. 6 used 2.4- 42vdc motors, as described above. You are purchasing the item with this understanding*Sold with: As Is. Miscellaneous You have every right to ask questions about this product. Please take the opportunity to do so. Please do not make a purchase ... moreuntil you have satisfied yourself that this product will suit your needs. Payment: PayPal. Shipping Weight of this item: 6lbs You can calculate your shipping rates here(use Zip 27262 as the origin) Or: See Listing for Shipping Costs Combined shipping: is available for some items eBay does not allow Listings that do not include Insurance. Insurance is therefore included as handling charge UNITED STATES POSTAL SERVICE INSURANCE FEE RATES Fee. Insurance Coverage $1.85. $0.01 to $50 $2.05. $50.01 to $100 $2.45. $100.01 to $200 $4.60. $200.01 to $300 $5.50. $300.01 to $400/ Below is a selection of rates to International Destinations using Priority Mailing up 45lbs for rates greater than that use this link to confirm other shipping rates: Afghanistan- Belgium 1lb $23.00. 2lbs 27.25, 3lbs 31.50, 4lbs 35.75 Belize- Cape Verde 1lb $19.50. 2lbs 23.25, 3lbs 27.00, 4lbs 30.75 Cayman Islands- Ecuador 1lb $21.00. 2lbs 25.00, 3lbs 29.00, 4lbs 33.00 Egypt- Ghana 1lb $21.00. 2lbs 25.00, 3lbs 29.00, 4lbs 33.00 Gibraltar- Ireland 1lb $24.00. 2lbs 27.00, 3lb
ARCO Roto-Phase CNC Rotary Phase Converter No. CNC10, 10 HP, 230 Volt (23307)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 23307 ARCO Roto-Phase CNC Rotary Phase Converter MODEL: CNC10 SERIAL NUMBER: 90642-LN GENERAL SPECIFICATIONS Designed specifically for CNC equipment. Provides balanced voltage to the controls of the CNC equipment Voltage balance within 2% or less under all loading conditions 230 Volt Spindle Horsepower: 10 2012 New Price: $4564.00 Approximate Weight: 450 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 ... morePayment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item Any item purchased with a pick up or delivery date more than 10 days
.063" 1/16" Carbide Router Bit - Spiral Chip Breaker Flutes CNC PCB
063" 1/16" Carbide Router Bit- Spiral Chip Breaker Flutes CNC PCB 1 Piece of 1/16" 063" Diamond Cut Flutes Carbide Router Bits Spiral Chip Breaker Flutes Cut Chips in Small Pieces. Maximizing Debris Removal& Enhancing Cut Quality 1/8" Shaft fits CNC Routers& Dremel tools. Overall Length is 1 1/2" Flute Length.400" Fishtail" Plunge tips for Precision Routing Quality Constructed of Tungsten Carbide by Industry-Leading Manufacturer USA Great for PC Boards. Plastics, Wood, Soft Metals, etc. Very Lightly Used. Lots of Life Left Depth Setting Plastic Rings Included These bits were used in the production of military grade circuit boards and were taken out of service well before any wear was noticeable. Why buy new when lightly used is a much better value! Thank you for Looking!
Okuma Crown 762S-BB CNC Lathe 2000, Okuma OSP700L Control, 10" Chuck, Tail Stock
Okuma Crown 762S-BB CNC Lathe 2000 Okuma OSP700L Control 10" Chuck Tail Stock Category: CNC Turning Centers Sub Category: Horizontal Turning CNC Stock No. 4932 Age: 2000 Serial# 1796 Location: Fullerton. CA. Chuck 10" Swing Over Bed 21.6" Max. Cutting Diameter 10.63" Max. Machining Length 20.47" X-Axis Travel 7.28" Z-Axis Travel 20.47" Spindle Nose/ Bore A2-8" 3.1" Bar Capacity 2.5" Spindle Speed 3.500 RPM Spindle Motor 15 HP Tailstock Quill Diameter/ Center 3.54" MT#5 Approx. Dimensions 105" x 70" x 71" Approx. Weight 9.700 lbs. Equipped With: Okuma OSP700L CNC Control. Tailstock, 2) Boring Bar Holders, 2) Blocks, 12) Wedges, and Manuals. Price… $44.500.00 Contact Information: ACT MACHINERY 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT ... moreInc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 1
Citizen F20 CNC Swiss Type Turning Center
CITIZEN F20 CNC SWISS TYPE CNC CINCOM 196" BAR FEED FANUC 3 T SERIAL: V1016- AGE: 1985 QTY. 16 LIVE HOLDERS. HOLDERS, COLLETS CITIZEN TOOL PRESETTER- TP1000 MANUALS PRICE: FOB CLEVELAND. OH- $11,750 SUBJECT TO PRIOR SALE Call De or John for Additional Information: 216-761-7011.
Dainichi CNC Lathe B45 BX-45 1985
Dainichi CNC Lathe B45 BX-45 1985 Model: BX-45 Serial# 20752 Year: 1985 This item is"Used and in Working Condition" Buyer responsible for pickup. Or all freight charges. Have a look at my feedback and buy with confidence. The picture is of the actual item. No manuals or accessories are included unless it is in the picture or stated in the description. If you have any questions please feel free to ask and we will get back to you as soon as possible. Emails will be answered as promptly as possible. We are open Monday thru Friday. 8-4pm EST. If you are from outside the USA you will need to contact us for a shipping quote. The buyer is responsible for any taxes. Duties, custom fees etc. Shipping: We generally use USPS Priority Mail for all shipping(due to cheap rates and daily pickups) Use the shipping calculator to estimate shipping ... morequote from Kentucky 40033/Virginia 22802. For heavier items. We advise USPS parcel post or FedEx for under 70 pounds. For items 70+ pounds that need to go freight/LTL, we do have carriers that have great rates, or customer can arrange their own shipping/pickup. We will not ship any item(s) till payment has been cleared through Paypal. In most cases we ship within 48 hours. If any shipping changes have to be made. Please request it immediately after purchasing the item. If you are concerned about the item and would like Insurance applied. Please let us know immediately after purchasing item or before so we can apply Insurance to the shipping quote prior to sending you an invoice/you paying of the item. We are required to charge sales tax if shipping or pickup in the state of KY/VA. If you are tax exempt we will need a copy of the tax exempt form. Before shipping or pickup. Terms and Conditions: Equipment is sold"AS IS" due to the nature of used. Extra parts and equipment. There are no guarantees or warranties with the items sold. Unless it is specifically stated in the description. In most cases, we have no way of verifying that the unit is working, or have the ability
1986 Pacific Fabriformer 225 Pressbrake w/ Rapiset CNC Back Gage X & R Axis
HTML Online Editor Sample 7918 E McClain Drive Suite 101 Scottsdale AZ 85260 Tel: 480-212-0775 Fax: 480-922-1675 One(1) 1986 Pacific Fabriformer 225 BRAKES. PRESS, N/C& CNC Control: Rapiset CNC Back Gage Capacity, 225Ton, Overall Length of Bed and Ram, 10' Distance Between Housings, 8'5" Stroke, 18" Die Space, 19" Closed Height, 9.8" Throat Depth, 8" Distance Floor to Bed, 43" Approach Speed, 22IPM, Return Speed, 250IPM, Equipped with, Rapiset CNC Back Gage Controlling X and R Axis, 24" CNC Back Gage, Z1.Z2, Z3, Z4 Traversing Back Gage Fingers, Gage Finger Clamping, Auto Deflection(Crowning) Compensations Cylinders, Flush Floor Design, Electric Foot Switch, Pedestal Palm Button Stations, Sick Light Curtains, 2) Front Support Arms, Various Tooling, Lincoln Auto-Lube, Approximate Overall Dimensions ... more192" x 70" x 139" Approximate Overall Weight 35.000Lbs. Notes, Machine Sold Complete as shown with tooling. Inspect Under Power. There is a hydraulic valve apparently sticking and machine will be sold as-is. We can provide shipping quotes upon your request. Contact Tom at 480-212-0775 with any questions. Etc.
50 Micro drill Bits Set 0.3mm - 1.1mm Pcb Cnc Dremel Press Jewelry Free Shipping
50 Micro Drill Bits Set: 0.3mm- 1.1mm 10 sizes x 5pcs each: 0.30mm. 0.40mm, 0.45mm, 0.50mm 0.65mm. 0.7mm, 0.8mm, 0.95mm, 1.0mm, 1.05mm 1/8" shaft- 3.17mm) Total 50pcs! Lightly used- great condition! Use for pcb. Cnc, metal wood and etc. The color of the rings changing! This picture for example! Very sharp! Payments: Paypal only. Please clear payment in 2 days. Shipping: Shipping worldwide with registered mail. You can check your tracking number on your Won page. Returns accepted 7 days after recive. Please feel free to contact me with any questions. Thanks for looking!
50 Micro drill Bits Set 0.8mm - 1.2mm Pcb Cnc Dremel
50 Micro Drill Bits Set: 0.8mm- 1.2mm 5 sizes x 10pcs each: 0.8mm. 0.85mm, 1.0mm, 1.1mm. 1.2mm, 1/8" shaft- 3.17mm) Total 50pcs! Very sharp! Lightly used- great condition! Use for pcb. Cnc, metal wood and etc. The color of the rings changing! This picture for example! Payments: Paypal only. Shipping: Shipping worldwide with registered mail. You can check your tracking number on your Won page. Returns accepted 7 days after recive. Please feel free to contact me with any questions. Thanks for looking!
Cincinnati Milacron Acramatic 850SX CNC Controller 3-422-2105A _ 3-711-2700G
Our internal inventory number on this item is: CV# 24-D-3-B PLEASE NOTE: This part is from a working machine. We have no way of testing it once it was removed. To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. This Part Came off a Cincinnati Milacron CNC Turning Center. Model: Avenger250MT, Serial: 3650PMT95-0443 Description: It is a Cincinnati Milacron Acramatic 850SX CNC Controller. Model Number: 3-422-2105A 34222105A 3-422-21O5A 342221O5A Siemens Motion Control Systems. Part Number: 3-711-2700G. Rep No. 136 604. Tech: 41 AI-IU-AM. App. Weight: 40 Lbs. Dimensions: 15.5" x 21.75" ... morex 5.75" Cosmetic Condition Rating: 3-Fair Note: This is solely a cosmetic description of the item. This part was pulled from a working machine. And is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $14.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $19.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when reques
RICHMILL BT50 CNC TOOL HOLDER 1-1/2" CAPACITY
RICHMILL BT50 CNC TOOL HOLDER 1-1/2" CAPACITY Click Images to Enlarge ​RICHMILL BT50 CNC TOOL HOLDER 1-1/2" CAPACITY MADE BY RICHMILL. BT50. CAPACITY 1-1/2" WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS. Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 12 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling ... morefee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools an
3/8" ERICKSON QUICK CHANGE NMTB 40 Taper End Mill Holder NT40 CNC 5/8-11
This auction is for a 3/8" ERICKSON QUICK CHANGE NMTB 40 taper end mill holder in very good used condition and has a 5/8-11 thread for the draw bar. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the invoice for your combined items. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my!
1/2" NMTB 40 Taper End Mill Holder NT40 CNC 5/8-11 Quick Change
This auction is for a 1/2" NMTB 40 taper end mill holder in very good used condition. I don't know the manufacturer but there made in Spain and has a 5/8-11 thread for the draw bar. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the invoice for your combined items. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my!
4 NMTB 40 Taper End Mill Holder 1-1/2" 1" 7/8" 3/4" NT40 CNC 5/8-11 Quick Change
This auction is for 4 NMTB 40 taper end mill holders in very good used condition. I don't know the manufacturer but there made in Spain in the following sizes 1-1/2" 1" 7/8" and 3/4" The 1-1/2 and 1" is missing 1 set screw each and all have a 5/8-11 thread for the draw bar. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the invoice for your combined items. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my!
old ShopBot CNC controller break out board stepper driver SHOP BOT router
I removed this in January from a working PR ShopBot. Everything worked great at the time. This ran the windows 98 MS DOS based software. I would say this machine saw light use.
Emco F1 CNC Mill Support Bearing Assembly X, Y and Z Axis Ball Screw Nut Ballnut
Emco F1 CNC Mill Support Bearing Assembly X. Y and Z Axis Ball Screw D escription: Emco F1 Support Bearing Assembly; Round bushing with two holes for mounting bolts and associated thrust bearings. Spacers and support bearing in excellent mechanical condition. Sold as shown Ready to use SHIPPING: Shipping to US. Canada, UK, EU, Australia and New Zealand. I ship from Ann Arbor, Michigan 48103. That's all I can tell you. I'm not an engineer. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. I offer a 30 day money back guarantee but you must return it to me at your expense! If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours, Otherwise, I may offer this item to the next highest bidder. DISCLAIMER ... moreYou may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
30 TON NISSHINBO "HIQ-1250" 37-STATION CNC TURRET PUNCH - #26838
Quote# 26838. 30 TON NISSHINBO"HIQ-1250" 37-STATION CNC TURRET PUNCH New 2000. Serial No HIQH-12016, Model HIQ-1250. EQUIPPED WITH: Nisshinbo PAL-510T 5-Axis Simultaneous CNC Control w/CRT 37-Station"Thick" Turret(Bi-Directional) w/3 Auto. Index Stations 49.2" X 196.85" Sheet Size w/Automatic Repositioning Automatic Sheet Repositioning. CATALOGUE SPECIFICATIONS: Tonnage Capacity 294.OkN 30 TON Material Thickness. Maximum.250" 6.35MM Hole Capacity. Maximum 3.5" 11 GA Hole Capacity. Maximum 88.9MM- 2MM Hole Capacity. Maximum 1.625" 250" Hole Capacity. Maximum 41.3MM- 6.35MM Workpiece Size. Without Repositioning 49.2" X 98.4" Workpiece Size. Without Repostioning 1250MM X 2500MM Workpiece Size. With Repositioning 49.2" X 196.85" Workpiece Size. With Repositioning 1250MM X 5000MM ... moreMaximum Sheet Weight w/o Outboard Tables 397LBS 180KG Hits Per Minute@ 1" Moves 260 HPM Nibbling Hits Per Minute 650 HPM Axis Speeds. Max. 60M/MIN 2400 IPM Auto-Index Speed 30 RPM(Bi-Directional) Overall Dimensions. L x W 17'4" x 14'11" Overall Height 7'5" Weight. Approximately 34,000 LBS. PRICE: F.O.B. OUR WAREHOUSE $39.500.00. All machines/equipment subject to prior sell.
28" Swg 44.1" cc Daewoo Puma 400B CNC LATHE, Fanuc 18iTB, Tailstck., Chip Conv
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 28" Swg 44.1" cc Daewoo Puma 400B CNC LATHE. Fanuc 18iTB, Tailstck. Chip Conv Ref# 150922 iammdna XCNCTC DAEWOO PUMA 400B 2-AXIS CNC TURNING CENTER NEW: 9/2003 SPECIFICATIONS: SWING OVER BED. ... more28" SWING OVER CARRIAGE. 18.9" MAX. TURNING DIAMETER. 21.7" MAX. TURNING LENGTH. 44.1" X-AXIS TRAVEL. 14.3" Z-AXIS TRAVEL. 43.5" SPINDLE SPEED. 2.000 RPM SPINDLE NOSE. A2-11 THRU SPINDLE HOLE DIAMETER. 5.2" DRAW TUBE ID. 4.62" NUMBER OF TOOL STATIONS. 10 TURNING TOOL SHANK SIZE. 1.25" BORING BAR DIAMETER. 2.5" TURRET INDEXING TIME. 0.25 sec. RAPID TRAVERSE RATE X/Z. 630/790 IPM TAILSTOCK QUILL DIAMETER. 4.7" TAILSTOCK QUILL TAPER. MT#5 TAILSTOCK QUILL TRAVEL. 4.7" SPINDLE MOTOR. 50HP APPROX. FLOOR SPACE W/CONVEYOR. 153" X 94" APPROX. WEIGHT. 19.640 LBS EQUIPPED WITH: FANUC 18iTB CNC CONTROL- AUTOMATIC TOOL SETTER- HYDRAULIC COLLET CHUCK- PARTS CATCHER- PROGRAMMABLE TAILSTOCK- CHIP CONVEYOR- ALL AVAILABLE TOOLHOLDERS- ALL AVAILABLE MANUALS Machine Location: Click Here For More Daewoo Machines Click Here For More CNC Machines- CNC TURNING CENTERS- CNC LATHES(s) Questions about this Ma
Modig Profileline MD 7200 CNC Extrusion Mill Machining Center 1998
For Sale is a Modig Profile Line MD 7200 CNC Extrusion Mill Machining Center Serial Number PRO-970338 with all original manuals(2 sets) and literature. Priced to sell. Only the setting arbor for this machine comes with it as we have 2 machines to sell. Machine no longer under power. Modig did a horrible job with documentation on both of these machines as seriel& model numbers on machine and documantation do not match. I have spoken with the USA Dealer who claims the machines are in running order but in need of heavy maintenance, Labeled Crestview 1. The Modig Profileline for aircraft extrusion longeron and stringer machining has become very popular among the world leading aircraft manufacturers. Companies like Boeing. SAAB, Airbus, Raytheon, and some subcontractors have already invested in a number of machines. The system floor space ... moreis small yet has the capacity for aluminum extrusions up to approximately 40’ The fixturing and tooling costs are small. Type of machine Machining Center- Vertical Make MODIG Type MD 7200 Year of manufacture 1998 Type of control Conventional Storage location Oklahoma City. OK Country of origin Sweden Delivery time immediately Freight basis ex Warehouse Technical details x-travel 750 mm y-travel 200 mm z-travel u-travel 500 mm 950 mm table surface area 900 x 350 mm spindle throat 395 mm distance work spindle/surface of the table 100- 600 mm spindle taper ISO 40 tool diameter 105 mm table load capacity 400 kg spindle turning speed range 50- 20.000 RPM spindle motor 10/ 15 kW feed X. Y, Z 0- 20,000 mm/min feed U 0- 16.000 mm/min total power requirement 18 kW weight of the machine ca. 4.1000 t dimensions of the machine ca. 3.70 x 3.10 x 3.20 m Additional information With HEIDENHAIN TNC 430 5-axis CNC-Dialog-Control with graphics and electronic hand wheel. Furthermore the machine is equipped with: automatic TOOL CHANGER with TOOL STORAGE for 24 tools. AC-DC drive, ball roller bearings, chip conveyor, fully guarded and separate coolant unit, and setting unit with machine numb
Dynomotion KFLOP 8-axis Motion Control Board CNC
Used Mint Condition Dynomotion KFLOP 8-axis Motion Control Board(Rev 1.1) USB cable included.
EAGLE VERTICAL KNEE MILL WITH ANILAM 3300 CNC
EAGLE VERTICAL KNEE MILL WITH ANILAM 3300 CNC S/N: 940518 12"X48" TABLE TRAVEL X=29" Y=17" Z=5" 5 HP ANILAM 3300 MK KURT POWER DRAW BAR WORKLIGHT MIST UNIT POWER KNEE FREE LOADING ON YOUR TRUCK
Parker precison linear actuator, manual. THK, NSK, IKO, automation, CNC
This is a very nice Parker linear manual actuator positioning stage. It moves on a pair of IKO precision cross roller slides and has a travel of a bit more than 1.25" I have other automation and cnc components. take a look. Will ship to lower 48 states only.
(2) NSK LS15 linear slide rail, 25.25" long, THK, IKO, actuator, CNC, stage
This is a very nice pair of NSK LS15 linear rails. They have two rows of recirculating ball bearings on each side of each bearing. None of the balls are missing. I have other automation and cnc components. take a look. Will ship to lower 48 states only.
OKUMA OSP5000L-G OSP500L-G CNC SYSTEM OPERATION MANUAL (6TH EDITION)
THIS AUCTION IS FOR OKUMA OSP5000L-G OSP500L-G CNC SYSTEM OPERATION MANUAL(6TH EDITION) PUBLICATION NO. 2446-E-R6(SEPTEMBER 1988) IT IS FOR LATES IT IS IN GOOD CONDTION ALL PAGES ARE THERE I will ship out within 2-3 business days after i recieve payment however it is usually more like 1 day I am honest and will work with any buyer any questions feel free to ask I always list every thing the best I can. Thank-u for looking. A.
OKUMA OSP 500L-G OSP 5020L LB SERIES CNC LATHES MAINTENANCE MANUAL
THIS AUCTION IS FOROKUMA OSP 500L-G OSP 5020L LB SERIES CNC LATHES MAINTENANCE MANUAL PUBLICATION NO. K 2805-E-R3(JULY 1990) IT IS IN GOOD CONDTION WITH NO PAGES MISSING I will ship out within 2-3 business days after i recieve payment however it is usually more like 1 day I am honest and will work with any buyer any questions feel free to ask I always list every thing the best I can. Thank-u for looking. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f3ae69826-0xfc-
OKUMA CNC LATHE LB15 WITH OSP5000L CNC SYSTEM OPERATION & MAINTENANCE MANUAL
THIS AUCTION IS FOR OKUMA CNC LATHE LB15 WITH OSP5000L CNC SYSTEM OPERATION& MAINTENANCE MANUAL PUBLICATION NO. K2567-E(NOVEMBER 1989) IT IS IN GOOD CONDTION ALL PAGES ARE THERE I will ship out within 2-3 business days after i recieve payment however it is usually more like 1 day I am honest and will work with any buyer any questions feel free to ask I always list every thing the best I can. Thank-u for looking. A.
OKUMA CNC LATHE LB15 WITH OSP5000L-G CNC PARTS BOOK
THIS AUCTION IS FOR OKUMA OKUMA CNC LATHE LB15 WITH OSP5000L-G CNC PARTS BOOK PUBLICATION NO. KLE15-367-R1(JUNE 1989) IT IS IN GOOD CONDTION WITH NO PAGES MISSING I will ship out within 2-3 business days after i recieve payment however it is usually more like 1 day I am honest and will work with any buyer any questions feel free to ask I always list every thing the best I can. Thank-u for looking.
1991 MITSUBISHI #M25J CNC SINKER TYPE EDM MACHINE
MITSUBISHI#M25J CNC SINKER TYPE EDM MACHINE NEW 1991 WORK TANK SIZE- 28" X 18" X 12" WORK TABLE SIZE- 19.25" X 13.5" TRAVEL- X) 10" TRAVEL- Y) 6" TRAVEL- Z) 10" DISTANCE QUILL TO TABLE- MINIMUM) 7.87" DISTANCE QUILL TO TABLE- MAXIMUM) 17.72" MAXIMUM ELECTRODE WEIGHT- 66 LBS. MAXIMUM WORKPIECE WEIGHT- 550 LBS. APPROXIMATE MACHINE WEIGHT- 4.400 LBS APPROXIMATE MACHINE DIMENSIONS- 121"LR) X 53"FB) X 104"H) EQUIPPED WITH- MITSUBISHI JC7G35 CNC CONTROL WITH COLOR MONITOR 35 AMP POWER SUPPLY SYSTEM 3R MACRO HEAD FULL C AXIS( 001 DEGREE) 10" X 15" WALKER FINE LINE MAGNETIC CHUCK WITH VARIABLE CONTROL REMOTE PENDANT CONTROL FLOPPY DISC DRIVE DIALECTRIC SYSTEM WITH FILTERS& COOLER AUTO. FIRE EXTINGUISHER TRANSFORMER. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com ... moreFINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
2007 Haas TL3 CNC Lathe Steady Rest Low Hours Coolant
2007 Haas TL3 CNC Lathe Spindle time: 2445 Equipped with: Manual Tailstock 5” Manual Steady Rest Coolant pump QC Toolpost No Chuck Specs SWING DIAMETER Over Front Apron, 20.0" Over Cross Slide, 13.0" CAPACITIES Chuck(optional) 12" Max Cutting Diameter, 20" Max Cutting Length, 60" Between Centers, 60" TRAVELS& FEEDRATES. X Axis, 12" Z Axis, 60" Rapids on X 75 in/min Rapids on Z, 150 in/min Max Thrust X, 3096 lb Max Thrust Z, 3086 lb SPINDLE Max Rating, 18 hp Max Speed, 1800 rpm Max Torque, 204 ft-lb@ 417 rpm Spindle Nose, A2-6 Spindle Bore ø, 3.50" GENERAL Machine Weight, 6500 lb Delivery First Week of July 25% Deposit with Order Balance Prior To Shipping For More Information Please Call Maury Cohn 1 800 888 4312
2 Tapmatic 30X Taping Heads #0-1/4" w/ collets - CNC lathe mill
2 Tapmatic 30X Taping Heads#0-1/4" w/ collets- CNC lathe mill. Click picture to enlarge click picture to enlarge Description 2 Tapmatic 30 taping head#0-1/4" Heads are in good working condition. They do show normal signs of wear as pictured. They come with collets and wrenches. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge Payment We accept PAYPAL payments. Please make payments within 36 hours of purchase. Shipping We ship within 48 business hours of cleared payment. We will combine shipping whenever possible with no handling charges. Thanks for looking. Have a great day! txzj pxzj229 txzj-4 txzj1
Mitsubishi CNC Display Screen FCUA-LD10A
Mitsubishi CNC Display Screen pic: 3648-53 loc: SR S3 Model Number: FCUA-LD10A Used. In great condition. FREE SHIPPING! AK. HI, PR: Free shipping for items via the Post Office. BUT, buyer pays actual shipping cost for items sent via UPS or Fed Ex. International buyers pay actual shipping charge(via the US Post Office) Payment: Paypal If you are the buyer of this item. Payment is expected within a five day period after purchase. If you are not able to send payment within this time frame, please contact me to make other arrangements, I am flexible. Warranty: All items are warrantied against D.O.A. it will work when it arrives) No warranty beyond that. I have made an honest and fair evaluation of this item. But I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to"make ... moreit right" Returns: I accept returns only for items under warranty- no returns for purchasing the incorrect item. Customer order changes, etc. Questions? 616-292-5579
Black CNC Flat Head Washers for T-Rex 500 PRO T-rex
Flat Head Washers for.T-Rex 500* 100% CNC machined. Use for Hex socket head cap screw M2.5 thread. Black anodizing*20/pack) Made in Thailand Please read our terms and policies carefully before bidding. By placing your bid. You agree to all the terms and conditions specified here. Payment- I only accept payment through PayPal-The payment should be made within 5 days after end of auction. Shipping& Handling-Your item will be carefully packed and shipped by Registered Airmail(signature required) from Thailand. The delivery time is normally about 10-25 days in most countries but it may take a little bit longer due to Customs inspections and can take up to 45 days in some European countries. Policies-your satisfaction is my goal. If you're not satisfied with the item you purchased. Please contact me before leaving a feedback. You can return ... morethe item in its original condition within 7 days for exchange or refund. Please note that s&h is not refundable and you're responsible for return shipping cost. The Unpaid Item Dispute will be filed if I do not hear from you within 7 days after end of auction. Powered by The free listing tool. List your items fast and easy and manage your active items.