|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Colorado Springs, United States MPN: 45174. CAT40 ER11H-4000 ER Collet Holder. DORIAN TOOL. • Tapers Ground to AT-3 Specifications or BETTER. Translates into more cutting tool life and ... morebetter surface finish. • Thru Coolant Feature.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Manufactured from alloy steel with good core strength and long wear life.The case hardness is designed to give maximum wear life without compromising ... morethe 60-62 HRC spindle. The core creates a damping effect from the vibration during the high speed milling, especially in long reach or heavy duty milling application. Taper ground to AT3 or better accuracy standard for maximum contact with spindle. All critical surface are precision ground. Concentricity is less than 0.0001" from taper to end mill pocket. Package Includes： 5pcs ERCollet Chuck CAT40 × ER32-2.76" 5/8"-11.
Buy It Now
$12.00 Shipping Condition: New Location: Irvine, United States BALANCE G2.5 25000rpm Gage Length 4.0. MODEL CAT40 SM3/4 4.0" RUN OUT (TIR) 0.0002". SHANK TYPE CAT40 DRAWBAR THREAD 5/8-11″. Send Check to 192 technology ... moredr. Site P Irvine CA92618.
Buy It Now
Free Shipping Condition: Used Location: Plano, United States It is subject to change, especially during peak periods. Our product photos predominantly feature the actual item you're purchasing.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 LYNDEX MORSE TAPER #1 TOOL HOLDER STUB 1 11/16 PROJ. W/ 9/16 DRILL BIT MT1. CAT40 MORSE TAPER TOOL HOLDER. Manufacturer: LYNDEX. MORSE TAPER #1 ... more(MT1). DRILL BIT IS INCLUDED BECAUSE WE WERE NOT ABLE TO REMOVE IT.
Buy It Now
Free Shipping Condition: Used Location: Walled Lake, United States Item is used and may contain witness marks or other visual imperfections consistent with normal usage. If you are not happy, we are not happy.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CV40TCF531 5925CE7. CAT40 TAPPING CHUCK TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Product Type: CAT40 ER11A. This holder use the standard ER 16 collets. Low strength steel could lead crack and rust very soon, especially by the inside ... morepocket area, accuracy will also drop only after a little while, so make sure avoid purchasing bad quality and unbalanced chucks.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Manufacturer: SPIN TRU. Condition: New. SIZE & LABELING.
Buy It Now
$11.97 Shipping Condition: Used Location: Johnson City, United States Nikken CAT40 1-1/4 Collet Chuck Tool Holder. 4.125" Gage Length.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 2 x CAT40 1/2 x 3" End Mill Tool Holder. Max Rpm Balanced: G2.5 20000. We will much appreciate it and try to improve our service. Shank Size: CAT 40. ... moreWe will try our best to save your problem ASAP.
Buy It Now
$10.00 Shipping Condition: Used Location: Coloma, United States NICE C3 TOOL HOLDER
Buy It Now
Free Shipping Condition: Used Location: Covina, United States These are 2 CNC CAT40 Endmill Tool Holders. Shanks: CAT40. Overall Lengths: 5-3/8".
Buy It Now
Free Shipping Condition: New – Open box Location: West Covina, United States Condition Note .
Buy It Now
$9.00 Shipping Condition: New Location: Irvine, United States 1PCS PRECISION CAT40 3/4" X3.15" SHRINK FIT TOOL HOLDER BALANCE G2.5 25000RPM. BALANCE G2.5 25000rpm Gage Length 3.15″ COOLANT NO. Run out TIR :0.0001". ... moreSend Check to 192 technology dr. Site P Irvine CA92618.
Buy It Now
$37.24 Shipping Condition: New Location: Huntington Beach, United States This Techniks Simis kit includes a 4 CAT40 ER32 collet chucks, 18 pc. ER32 collet set, and a ER32 wrench. Techniks Simis CAT40 ER32 Collet Chucks, 18 ... morePc. ER32 Collet Set & Wrench. The CAT40 ER32 collet chuck has a 2.76" gage length and is balanced to 18,000 RPM.
Buy It Now
Free Shipping Condition: New Location: United States Collet Chuck, Taper Size CV40, Projection 2 1/2 in, ER16. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Type: CAT40. Feature: 1. Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize the stress on ... morespindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States CAT40 END MILL HOLDER.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ). My knowledge of these is very limited.
Buy It Now
Free Shipping Condition: New Location: Mount Vernon, United States SCM Endmill Holder. Gage Length :2.63". Bore : 1/2". Cat 50 Standard Length. We are a provider of high quality tools at a very fair price.
Buy It Now
Free Shipping Condition: New Location: China It can accommodateCAT/BT, HSK/ / CAPTO CNC tools, and can be mixed and matched in multiple models to provide versatile storage and organization for your ... moretooling needs. This tool storage rack is made of high-quality cold-rolled steel material, sturdy and durable.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： Head Diameter：0.747" Head Angle ： 75° Drawbar Thread Size：5/8"-11 Machine Taper Size ：CAT40 Neck Diameter：0.549" Hole：0.281" Pilot：0.641" ... moreOverall Length：2.001" Shoulder To Head：0.787" Shoulder To End：1.024" Coolant Hole Features： Made from alloy steel 5155 with heat treat to RC 56-58 Each retention knob is individually magnetic particle tested to ensure free of crack High quality black oxide finish to ensure long enduring tool life.
Buy It Now
$12.44 Shipping Condition: New Location: Canada
Buy It Now
$7.95 Shipping Condition: Used Location: Cleveland, United States (2) PARLEC TG100 COLLET CHUCKS. CAT 40 TAPER SHANK.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Manufacturer: SECO. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING. MPN: BR3848BBT.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifics and features: Condition:100% Brand New & High Quality. Fitment For Hurco Mazak Okuma Fadal. ANSI Standard Taper: CAT 40 C: 45° D1 Knob: 0.740" ... moreD2 Neck: 0.490" D3 Hole: 0.28" D4 Pilot: 0.636" L: 1.625" L1: 0.440" L2 Shou to End: 0.640" Knob Socket: RKW40 Package Includes: 15× CAT 40 Pull Stud .
Buy It Now
$19.00 Shipping Condition: New Location: Chino, United States 5/8"-11 retention knob thread. For CNC machines with CAT 40 taper spindles. AIR, POWER & HAND TOOLS. Get It Quick! Why should you buy from us?.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification?? Set of 4 high precision ER16 collet chuck. Gage or projection length of ER16 is 4"(100mm). Accuracy in 0.0001-0.0002" max. Fully ground ... moreflange and V-groove-easy on tool changers for less spindle. Fit for Drilling Machine ,Milling Machine CNC Chuck or Hold. Package Dimensions 7.9 × 5.6 × 5.6 inches. Notes?? Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. Package Included?? CAT40-ER16 COLLET CHUCKS W. 4" LONG GAGE LENGTH 4CHUCKS Tool Holder Set.
Buy It Now
$7.75 Shipping Condition: New Location: Huntington Beach, United States | | | | | | | Techniks Part# CAT40SLN3/4-1.75, 3/4" Diameter CAT40 end mill holder x 1.75” length(L1 dimension on image#2) This is the best tool ... moreholder value in the industry! Proven performance on Haas. Fadal, Mazak, Mori Seiki, Kitamura, Hurco, and many others! Balanced to 8.000 RPM's. Taper ground to high precision AT3 accuracy and H7 Bore Tolerance(all meeting or exceeding industry standards) Need pull studs? We combine shipping! Check out our other holders. Collet chucks, collets, wrenches, and the very best tooling values by clicking here: Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We combine shipping! Purchase via But-It-Now and we'll send you a combined shipping invoice) 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawa
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 1 x CAT40 3/8 X 1.75" End Mill Tool Holder. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize ... morevibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Buy It Now
$10.60 Shipping Condition: Used Location: Spokane, United States Tecnara 140-208-4 CAT 40 Toolholder 1" Shank. Condition is "Used". Shipped with USPS Priority Mail Padded Flat Rate Envelope.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States CAT40 5/8-11 45 Pull Stud Retention Knob for Haas Kitamura Miyano Hex Type ER16 Collet Wrench. CAT40 15 0.747 Pull Stud Coolant Thru Retention Knob for ... moreDMG Mori Doosan ER16 Ball Bearing Collet Nut. No longer having an off-center internal collet ring, this collet nut's internal clamp is designed with balance in mind while it's easy to snap-in snap-out ER collet.
Buy It Now
$14.70 Shipping Condition: New Location: Saint Charles, United States MAX RPM BALANCED TOG2.5 25000. Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification. This design allows ... morethe left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle.
Buy It Now
$5.00 Shipping Condition: Used Location: Byron Center, United States Item is used unless otherwise specified. We have several of these that are all in similar condition as listed. You will receive a holder like the one ... morepictured.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 8 x CAT 40 1/4" x 1.75" End Mill Tool Holder. We will get back to you as soon as possible. We do our best to resolve any issue. Based in La Pu ente, California. ... moreYou can be assured to buy! We will do our best to give you a satisfying solution.
Buy It Now
$14.99 Shipping Condition: Used Location: Cedar Rapids, United States Lot of 2 Used T.M. Smith shrink fit 3/4 holders. See pictures for condition. C40SF075275 Lot # Holders-8.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SHRINK FIT TOOL HOLDER. 40 EM 0.375. Condition: Used. YOU ARE PURCHASING THE PICTURED. LOCATION: FR-8-2-G-8. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Taper: CAT40. We will do our best to give you a satisfying solution. Based in La Pu ente, California. You can be assured to buy!
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Provides a very close tolerance fit with minimum runout between the tool holder’s arbor and the cutting tool. Translates into more cutting tool life and ... morebetter surface finish. Tapers Ground to AT-3 Specifications or BETTER.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 FLOATING ADJUSTABLE BORING HEAD TOOL HOLDER. Manufacturer: SP3. ITEM TITLE. LOCATION: WB14-5-10-8. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States COLLET CHUCK TYPE : ER32. Vise Soft Jaws. Collet Pads. HOLDER TYPE : COLLET CHUCK. Chuck Jaws - Round Jaws. Cobalt And HSS Drills. LENGTH (PROJECTION) ... more: 4.0". Chuck Jaws - Soft Jaws.
Buy It Now
Free Shipping Condition: Used Location: Plano, United States Used. CAT40 3/8" END MILL TOOL HOLDER Lyndex Japan 2-3/8" gage C4006-0375, in good working condition. please email any questions, thank you.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145992cbf76-0x114-
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 1 CAT40 APU13 1/2" drill chuck. used on any HAAS CAT40 spindle. Taper: CAT40. Material: 40cr. We will get back to you as soon as possible.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States Manufacturer: BIG DAISHOWA. BIG DAISHOWA. CAT40 POWER CHUCK TOOL HOLDER. Condition: Used. SIZE & LABELING. MPN: AR2521AC1. PRODUCT SPECIFICATIONS AND ... more/ OR LABELING.
Buy It Now
$10.00 Shipping Condition: Used Location: Pomona, United States
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Condition: Used. SIZE & LABELING.
Buy It Now
$4.95 Shipping Condition: New Location: Dayton, United States Parlec 1” id cat40 tool holder thru coolant hole. New in box. Feel free to ask any questions.
Buy It Now
$6.00 Shipping Condition: Used Location: Lansing, United States (Stk50) CAT40 HAAS 45° Solid Pull Stud Retention Knob.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SK40 DIEBOLD ER25 COLLET CHUCK TOOL HOLDER 2 5/8 PROJ. SK40XER25 ER 25 CAT40. SK40 COLLET CHUCK TOOL HOLDER. Manufacturer: DIEBOLD. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Product Type: CAT40 ER11A. 1、CAT40 ER11A chucks are widely used in industry fields with gage/processing length of 4" (100 mm). Each of them is hardened ... moreand grounded to ensure its accuracy, which ranges from 0.00012" to 0.0002" (0.003-0.005 mm).
Buy It Now
$16.25 Shipping Condition: Used Location: Virginia Beach, United States This FITZ-RITE Cat 40 40E-1.25-4.38 End Mill Holder is a high-quality tool for your CNC machining needs. Made by FITZ-RITE PRODUCTS in the United States, ... morethis holder features through-spindle coolant for optimal cutting performance. The standard length holder is compatible with various tool types and is ideal for use in workholding and toolholding applications. Purchase this reliable end mill holder for your business or industrial needs. Pmc1
Buy It Now
Free Shipping Condition: Used Location: Ventura, United States Fast Dispatch Service. Model: RB4E-0101. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
Buy It Now
Free Shipping Condition: Used Location: Galena, United States Inventory Number: 11120830884 Manufacturer: Description: LYNDEX 05001-40 1-1/2" SHELL MILL HOLDER. CAT-50 Capacity: Model Number: Serial Number: ... moreAdditional Information: USED. QUANTITY 1, GAGE LENGTH 3-3/8" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identical in
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States CAT40 ER25 chucks, widely used in industry fields with gage/processing length of 2.76" (70 mm). Each of them is hardened and grounded to ensure its accuracy ... moreof about 0.00015" (0.004 mm). Product Type: CAT40 ER25.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Manufacturer: COMMAND. Condition: Used. SIZE & LABELING.
Buy It Now
Free Shipping Condition: Used Location: Frankfort, United States
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Max RPM Balanced To: G2.5 20000 RPM. Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize ... morethe stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Refer to the title/pictures for all available information about this product. Item(s) described above and exactly what's pictured.
Buy It Now
$7.15 Shipping Condition: New Location: Greensburg, United States Cat 40 ER16 Collet holder New, never used Nut included Through Coolant No retention knob Balanced 25k @ 2.5 Check other listings for er 20 Collet holder ... morewill give discount to sell both together.
|
|
|
|
LYNDEX CAT 40 FACE MILL TOOL HOLDER W/CARBOLOY CUTTER 605 INV=14894
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a LYNDEX CAT 40 FACE MILL TOOL HOLDER W/CARBOLOY CUTTER 605 No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or ... morewhen the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
2013 Haas Super Mini 2 CAT-40 Taper VMC with 10,000 RPM
2013 Haas Super Mini Mill 2 Vertical Machining Center Travel 20" x 16" x 14" 4th Axis drive and wiring 10.000 RPM Cat 40 24 Side MT ATC(OPTION) 15 HP High 1 MB Memory High flow coolant pump kit HSM Auger Wips-R-Intuitive probing. Renishaw Early Power Failure detection USB 3 phase power 15” monitor Rigid Tapping HRT 160 Haas Rotary Have questions or need info call George at 602-625-6419 or email george@rockfishmachinery.com
|
|
|
TREE VERTICAL CNC MACHINE 40" X 20" MODEL VMC 1050 / 24 + CAT 40 TOOLING
TREE VERTICAL CNC MACHINE 40" X 20" MODEL VMC 1050/ 24 + CAT 40 TOOLING This is a fixed auction for a Tree CNC Machine. Model: VMC 1050/ 24 Machine Specifics: Table Size: 50" x 24" Longitudinal Travel: 40" Cross Travel: 20" Vertical Head Travel: 25" Spindle Speeds(Variable) 0-8000 RPM Spindle Taper: Cat 40 Table Load Capacity: 1990 LBS Voltage: 230V 3 Phase 60 Hz Dimensions(LxWxH) 115" x 107" x 118" Control: Dyna Path Delta Autocon CNC Control Included: All Cat 40 tooling as shown in auction pictures. Machine is exactly as pictured and was pulled from an operational work environment. We will happily load your truck at no charge. Or assist in planning the most economical delivery. The shipping costs we list in our description are for the 48 contiguous USA states only. Shipping will be recalculated ... morefor buyers in Hawaii. Alaska or outside the United States once we have received your shipping address. Buyers are responsible for their Country's custom fees. We always combine shipping to give you the lowest possible cost. We have competitive rates for our always welcomed international bidders. We pride ourselves on our customer service. And we want to make this eBay transaction as smooth as possible. Please feel free to call us between 9:00-5:00 EST Monday-Friday at 800 826 3433 if you have any questions.
|
|
|
Australia 1915 Roo 3d Yellow-Olive Die I wmk Narrow Crown Mint SG37 cat £40
Australia 1915 Roo 3d Yellow-Olive Die I wmk Narrow Crown Mint SG37 cat £40. Kangaroo third watermark Narrow Crown 3d yellow-olive die I mint. Lightly mounted mint with small part hinge remnants. Year: 1915. Reign: King George V. Condition: Lightly Mounted Mint. Catalogue No: 37. Catalogue: £40.00. Payment: Payment prefered via UK cheque or PayPal. I also accept GBP Postal Orders. UK/European bank transfers, etc. I can also take Debit/ Credit card payments through my online Merchant Account or over the phone- contact me for this option. Combined Postage: Postage is combined for multiple purchases and you will only be charged a single cost of the most expensive item on all standard sized items- the only exceptions may be stamp albums and other particularly heavy items. Payment Timescale: Please make payment within 30 days as the ... moreeBay checkout process is difficult after this time. I will file as non-payment after approx. 25 days as a reminder on unpaid items. Postage: Will post world-wide. Standard postage to UK is 60p, Europe is 95p, rest of the world is £1.28. Please Note- Within the UK. Standard postage is for items up to £20, Signed For postage for items up to £50, any lot or joint sending of lots totalling more than £50 must be sent Special Delivery for UK. Outwith the UK, standard Airmail is for items up to £50, above this items must be sent International Signed For Airmail. Check out my- most items start at 99p with no reserve.
|
|
|
CAT 40 CT40 3/4" Shell Mill Holder Adapter Tecnara 150-206-2
Tecnara CAT40 3/4" Dia. x 6" gauge length Shell Mill Adapter Comes with unknown pull stud as shown Looks like it has never had a cutter mounted on it but we are listing as used because it does have some staining and handling dings. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KENNAMETAL CAT 40 ARBOR mill milling tool holder & JACOBS 14N 1/2" DRILL CHUCK
good used Cat 40 tool holder with 0- 1/2" drill chuck arbor- Kennametal CV40JT3278 chuck- Jacobs 14M 0- 1/2" Ball Bearing Super Chuck with key has slight wear on the outside of jaws. but grips good and turns fine please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CAT 40 TAPER SHRINK COLLET FIT CHUCK mill cnc tool holder NIKKEN 40U-MMC8-85A
good used Cat 40 taper Shrink Fit collet chuck NIKKEN 40U-MMC8-85A please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KENNAMETAL CAT 40 TAPER 1/2" END MILL HOLDER milling machine tool CV40EM050262
good used Cat 40 taper 1/2" end mill holder Kennametal CV40EM050262 looks like it has had an end mill pulled out please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CAT 40 TAPER TG75 COLLET CHUCK mill milling tool holder KENNAMETAL CV40TG075275
good used Cat 40 taper TG 75 collet chuck KENNAMETAL CV40TG075275 with 3/4" collet please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LYNDEX CAT 40 ARBOR mill milling tool holder & JACOBS 18N 3/4" DRILL CHUCK
good used Cat 40 tool holder with 1/8- 3/4" drill chuck arbor- Lyndex C4003-0004 chuck- Jacobs 18N 1/8- 3/4" Ball Bearing Super Chuck with key please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
HONG KONG,CHINA,1998 NEW YEAR OF TIGER- #'s 807-10,8 SETS,2014 SCOTT CAT.$28.40
I ONLY ACCEPT PAYPAL FOR PAYMENT. NO EXCEPTIONS: Paypal is simple and quick to apply for and there are NO FEES for the buyer, ONLY THE SELLER pays a fee. You are bidding on 8 sets of Hong Kong, China, 1998 Year Of The TIGER Scott#s 807-10 in Lower Right corner blocks of 8, VF UHM. SEE 4 SCANS) I ALWAYS START MY AUCTION LOTS AT A VERY LOW PRICE, so that EVERYONE can participate. The stamps are in VF UHM condition. Shipping for U.S.A. destinations is $1.25, outside of the U.S.A. is $2.50. Please Paypal me promptly after winning unless you are bidding on another of my lots, in which case, keep me"e-mail informed" of that. I combine shipping costs for a one week period: Additional lots won are $.75 WITHIN A ONE WEEK PERIOD FROM YOUR FIRST WIN and will all be shipped together in one envelope. If you are just interested in this one lot, ... moreplease Paypal me promptly after this auction ends. Shipping 1 lot to U.S.A. destinations is $1.25, 2 lots is $2.00, 3 lots is $2.75, 4 lots is $3.50. Shipping to destinations OUTSIDE of the U.S.A. is $2.50 for 1 lot, 2 lots is $3.25, 3 lots is $4.00, and 4 lots is $4.75. I always ship within 2 business days. The 2014 Scott Catalog Value of these 8 sets is $28.40, 8 X $3.55) and the auction begins at $.99 Put me in your"Favorite Sellers" list and you will be notified of my new listings. Click on"see other items" to see my other listings. I ship in 6" X 9" manila envelopes with enough cardboard backing to ensure that your stamps will arrive intact, just as described. NOTE: I leave feedback for you as soon as you Paypal me, Please do not forget to leave feedback for me also, after all, it is the"CURRENCY OF CREDIBILITY" on E-bay! Thanks for looking!
|
|
|
CAYMAN ISLANDS SG 40-52b THE 1912-20 GV SET OF 13 FRESH MINT CAT £225
CAYMAN ISLANDS.THE 1912-20 GV SET OF 13 FRESH MOUNTED MINT supreme. Supremeauctiononlinesoftware.automatic.gallery. Supremeauctiononlinesoftware.automatic.feedback. On 08-Mar-10 at 22:22:01 GMT. Seller added the following information:
|
|
|
NAURU 1954 MINT H SC #39-47 WILDLIFE PICTORIALS CAT $17.40
NAURU 1954 MINT H SC#39-47 WILDLIFE PICTORIALS CAT $17.40 NAURU 1954 MINT H SC#39-47 PICTORIALS CAT $17.40 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional or extreme condition issues will be mentioned. Legend: PS- Postal Stationery FL- Folded Letter SFL- Stampless Folded Letter RPO- Railway Post Office CDS- Circular Date Stamp DPO- Dead Post Office SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. If a buyer has bought multiple lots he/she may ... moreelect to have them sent as multiple shipments by regular mail with each shipment not exceeding $100. Please note that in some cases the shipping may be slightly higher due to the fact that the item is oversize. If it has to be mailed in a 8.5 x 11 size envelope the shipping rate is an additional $1 then the quoted rates. All shipments valued over $100 including shipping will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $500(including shipping) Any purchases higher than this total amount will be invoiced separately and paid for and shipped separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 or multiple items shipped together valued over $700 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amounts. For the fo
|
|
|
NORTHERN RHODESIA 1963 MINT NH SC #75-88 QEII & ARMS CAT $40
NORTHERN RHODESIA 1963 MINT NH SC#75-88 QEII& ARMS CAT $40 NORTHERN RHODESIA 1963 MINT NH SC#75-88 QEII& ARMS CAT $40 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional or extreme condition issues will be mentioned. Legend: PS- Postal Stationery FL- Folded Letter SFL- Stampless Folded Letter RPO- Railway Post Office CDS- Circular Date Stamp DPO- Dead Post Office SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. If a buyer has bought multiple ... morelots he/she may elect to have them sent as multiple shipments by regular mail with each shipment not exceeding $100. Please note that in some cases the shipping may be slightly higher due to the fact that the item is oversize. If it has to be mailed in a 8.5 x 11 size envelope the shipping rate is an additional $1 then the quoted rates. All shipments valued over $100 including shipping will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $500(including shipping) Any purchases higher than this total amount will be invoiced separately and paid for and shipped separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 or multiple items shipped together valued over $700 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amount
|
|
|
PITCAIRN ISLANDS # 427-430 VF-MNH OENO ISLAND VACATION CAT VALUE $10.40
PITCAIRN ISLANDS# 427-430 VF-MNH OENO ISLAND VACATION CAT VALUE $10.40 IN THE NEXT FEW AUCTIONS YOU WILL SEE A CHANGE IN THE WAY I WILL BE LISTING I WILL BE SELLING MORE BUY IT NOW AUCTIONS. AS THIS GIVES YOU THE CHANCE TO BUY OUTRIGHT RATHER THAN GET INTO A BIDDING WAR, YOU WILL GET THE ITEM AT A VERY GOOD PRICE AND I WILL GET WHAT I WANT FOR THE ITEM WHICH IS A VERY FAIR WAY OF DOING THINGS, OF COURSE THERE WILL BE THE CHEAPER ITEMS THAT I WILL LIST AT UNDER $1 AND YOU CAN FIGHT IT OUT BETWEEN YOURSELVES. ANYWAY GOOD LUCK IN BUYING.ALL GB CAT VALUES ARE EITHER FROM THE SCOTT 2011 or THE STANLEY GIBBONS 2011) PLEASE DO NOT PAY STRAIGHT AWAY PLEASE WAIT UNTIL I SEND YOU AN INVOICE THANK YOU, I WILL BE LISTING NEW ITEMS EVERY DAY SO PLEASE MAKE SURE YOU DO NOT MISS OUT ON ANY SELLING ALL STAMPS& SHEETS& BOOKLETS AT THE CHEAPEST POSSIBLE ... morePRICES I ALSO DO COMBINE ONLY ON ONE AUCTION WITH NO EXCEPTIONS. PLEASE BE KIND WITH YOUR FEEDBACK"OK"LEFT IS JUST NOT GOOD ENOUGH I WOULD RATHER YOU NOT LEAVE ANY I WILL ALWAYS GIVE THE BEST POSSIBLE FEEDBACK I WOULD EXPECT THE SAME THANKS FOR BIDDING 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146bd78c6a7-0x113-
|
|
|
INDIA 1975-19?? MINT AND USED GROUP SCV $59.40@ 8% OF CAT VALUE....
GREAT GROUP 87 STAMPS SOME HARD TO FIND
|
|
|
French Andorra - 12 stamps from the 1932 set, cat. $ 40.20
Mint. Hinged- for the most part, lightly hinged. Total catalog value for this group is $ 40.20. All stamps I sell on eBay are unconditionally guaranteed- return for a full refund plus shipping if you are not pleased. Looking for bargains to add to your collection? Check out my eBay store: New items are added each week. Also. Check out my I currently have up for auction. Be sure to add me to your! Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Germany Used Stamps Cat.$288.40
Hello and Thank You for Stopping by. Germany Location- In the northern Europe bordering on the Baltic Seas Capital- Berlin Cat. $288.40 Nice lot of Used German stamps. Low starting bid. Mailed as soon as auction is settled. No waiting! Not here to mislead you. So bid with confidence. Any questions please feel free to ask. Once again thank you for stopping by. Have a great day.
|
|
|
QATAR 1967 MINT NH SC #126-126T SHIPS CAT $25.40
QATAR 1967 MINT NH SC#126-126T SHIPS CAT $25.40 QATAR 1967 MINT NH SC#126-126T SHIPS CAT $25.40 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional or extreme condition issues will be mentioned. Legend: PS- Postal Stationery FL- Folded Letter SFL- Stampless Folded Letter RPO- Railway Post Office CDS- Circular Date Stamp DPO- Dead Post Office SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. If a buyer has bought multiple lots he/she may elect to have ... morethem sent as multiple shipments by regular mail with each shipment not exceeding $100. Please note that in some cases the shipping may be slightly higher due to the fact that the item is oversize. If it has to be mailed in a 8.5 x 11 size envelope the shipping rate is an additional $1 then the quoted rates. All shipments valued over $100 including shipping will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $500(including shipping) Any purchases higher than this total amount will be invoiced separately and paid for and shipped separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 or multiple items shipped together valued over $700 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amounts. For the following cou
|
|
|
Persia 1900th overprint cat $40
Additional/better scans are on demand I ship only by R-mail $5 worldwide Please. Look at my other lots, over 3.000 from the classic period.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146bd7f8dbe-0x112-
|
|
|
Korea - Scott Cat# 4039-4041 Unused HR CV $1.40 Flowers
Korea- Scott Catalogue# 4039-4041 Unused Fine HR. Catalogue Value $1.40. Complete set of 3 Stamps. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-146bd91b902-0x109-
|
|
|
(QTY 14) Cat 40 Tool Holders w/ carriers
14 miscellaneous cat 40 colleted tool holders. Will be delivered with the tool holder trays shown in the picture. All items are sold as is.
|
|
|
LMT CAT40 10MM SHRINK FIT HOLDER 79046 CAT 40 FREE SHIPPING USA LOT C8002
LOT C8002 WE ARE OFFERING A LMT CAT40 10MM SHRINK FIT HOLDER PART#79046 YOU WILL RECEIVE AS SHOWN IN PICTURES. CLICK LINK BELOW TO Visit My eBay Store! ANY QUESTIONS PLEASE CALL 937-320-2298 CLICK LINK BELOW TO PUT US ON YOUR.
|
|
|
LMT CAT40 10MM SHRINK FIT HOLDER 79046 CAT 40 FREE SHIPPING USA LOT C8001
LOT C8001 WE ARE OFFERING A LMT CAT40 10MM SHRINK FIT HOLDER PART#79046 YOU WILL RECEIVE AS SHOWN IN PICTURES. CLICK LINK BELOW TO Visit My eBay Store! ANY QUESTIONS PLEASE CALL 937-320-2298 CLICK LINK BELOW TO PUT US ON YOUR.
|
|
|
Used Bridgeport VMC-800-22 CNC Vertical Machining Center DX-32 CAT 40 31.5x20.
Machine Condition Machine is in good operating condition and has normal cosmetic wear. Machine is currently in use. Machine Specifications Table Size 39” X 19” Table Travels 31.5” X 20” X 20” Rapids X& Y Axis 1259” Min Z Axis 787” Min Spindle Taper#BT40 Spindle Speed Range 40- 6000 RPM Number of Tool Stations 22 ATC Max Table Load 1650 Lbs Equipped With DX-32 CNC Control DC Servo Motors for X& Y Axis’ Ball Screws in Table. Saddle& Column 22 Station ATC Coolant Electrical Requirements 240/3/60 55 amp Full Load Approximate Overall Weight 8000 Lbs Approximate Overall Dimensions 120" X 90” X 110” H(with spindle up)
|
|
|
HAAS VM2 CNC Mill Machine 41 tool changer ethernet cat 40 new in 2-2012
We are the original owner and machine cost $96.000 new. Used for aluminum and plastic most of the time. There is nothing wrong with this mill. We are just upgrading to a bigger mill. The machine has about 1200 cutting hours and is like new. The 2 machining vices and all tooling in the pictures is not included. Machine only however it comes with a wireless work tool setter and wireless probe by Renishaw that goes with machine. Shown in the pictures. If you would like to come by and see it.Still in everyday operation. Just contact us by email, if you would like to contact us by phone please send us your number. We do have good contacts on rigging. We are asking for $72.000 or the best offer. All shipping and rigging responsibility of buyer. Thank you, Peter.
|
|
|
CAT 40 KENNAMETAL COMPRESSION TENSION TAPPER W/ 10 TAP COLLETS CAT40 LOT C8034
LOT C8034 WE ARE OFFERING A KENNAMETAL ERICKSON COMPRESSION TENSION TAPPER W/ 10 TAP COLLETS. SIZES YOU RECEIVE ARE FOR THE FOLLOWING SIZE TAPS: 6. 8, 10, 1/4, 3/8.7/16, 1/2, 9/16. 5/8, AND 3/4 YOU WILL RECEIVE AS SHOWN IN PICTURES. CLICK LINK BELOW TO Visit My eBay Store! ANY QUESTIONS PLEASE CALL 937-320-2298 CLICK LINK BELOW TO PUT US ON YOUR.
|
|
|
LYNDEX CAT 40 SPEED INCREASER CAT40-HP10-165
LYNDEX CAT 40 SPEED INCREASER CAT40-HP10-165. USES ER 16 COLLETS
|
|
|
HAAS CAT 40 ER 16 COLLET CHUCK CT STUB
HAAS CAT 40 ER 16 COLLET CHUCK CT STUB;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146c0542674-0x11b-
|
|
|
kennametal cv40th062138 cat 40 adjustable boring head for 1/2" shank tooling
nice used kennametal vernier adjustable boring head for 1/2" tooling. All adjustments work smoothly 014-03-01-25-301 PLEASE READ BEFORE BIDDING: NO RETURNS Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– NO RETURNS FOR ANY REASON OTHER THAN DEAD ON ARRIVAL YOU WILL BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED. INSURED, ... moreAND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos or video of operation for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are subject
|
|
|
CAT40 SHELL / FACE MILL HOLDER WITH 1" PILOT SMH CAT 40 LOT C8465
LOT C8465 ANY QUESTIONS CALL 937-672-9876 FREE SHIPPING IN USA WE ARE OFFERING A CAT40 SHELL/FACEMILL HOLDER WITH A 1" PILOT. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES. IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your favorites list!
|
|
|
Sandvik CAT 40 0.750" Dia Shell Mill Holder, A392.4505-40 19 038, Used, WARRANTY
Title: Sandvik CAT 40 Taper 0.750" Shell Mill Holder Description: Our Internal Stock# TC-1-8(4/15/14 dan) You are about to purchase the following item: Catalog# A392.4505-40 19 038 CAT 40 10982 3/4" Shell End Mill Holder Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. ... moreBuyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Sh
|
|
|
HAAS CAT 40 5/8" END MILL HOLDER CT INCH STUB
HAAS CAT 40 5/8" END MILL HOLDER CT INCH STUB
|
|
|
HAAS CAT 40 ER 32 COLLET CHUCK CT STUB
HAAS CAT 40 ER 32 COLLET CHUCK CT STUB
|
|
|
HAAS CAT 40 3/4" END MILL HOLDER CT STUB
HAAS CAT 40 3/4" END MILL HOLDER CT STUB
|
|
|
HAAS CAT 40 1/2" END MILL HOLDER CT STUB
HAAS CAT 40 1/2" END MILL HOLDER CT STUB
|
|
|
Litter Box, 40 Lb Box Clumping Cat Litter, Kitten Food, Water And Food Dish
Litter Box house. Unopened 40 LB box of clumping cat litter, 15 lbs of Kit n Kaboodle kitten food dry, food and water dish, litter box scooper. Smoke free home! Local pick up only. Cannot ship.
|
|
|
Aqua Cube Pet Dog Cat Automatic Water Watering Fountain, 40 oz Water Capacity
Aqua Cube Pet Dog Cat Automatic Water Watering Fountain. 40 oz Water Capacity. Used in great condition. Shows minor wear use. Please see pictures. Item has been cleaned. What is in the pictures is what comes in the box. Helps reduce urinary diseases in cats. Free falling stream encourages pets to drink. Filter keeps water clean and fresh. 40 oz water capacity. Easy to clean. Please contact me with any questions. Thank you. Box does show some wear.
|
|
|
CANADA 1877 10C SMALL QUEEN USED SC #40 CAT $75
CANADA 1877 10C SMALL QUEEN USED SC#40 CAT $75 CANADA 1877 10C SMALL QUEEN USED SC#40 CAT $75 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional condition issues will be mentioned. SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. All shipments valued over $100 will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $250(including shipping) Any purchases higher than this amount will ... morebe invoiced and must be paid for separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amounts. For the following countries all shipments valued at over $60 must be sent by insured mail at an additional cost of $5. These currently include Romania. Russia, China, Brazil, and any other country that the seller at his sole discretion determines to be high risk. INVOICE Buyers please wait until I send an invoice with the correct shipping cost instead of doing self checkout as this will save me time in making a Paypal request for additional shipping or tax costs. SHIPPING TIME All items are sent within 5 business days of receipt of payment. It then takes approximately 1-2 weeks(sometimes longer) for the postal system to make it’s delivery. If
|
|
|
CANADA 1946 7C GOOSE RE-ENTRY USED UNITRADE #C9ii CAT $40
CANADA 1946 7C GOOSE RE-ENTRY USED UNITRADE#C9ii CAT $40 CANADA 1946 7C GOOSE RE-ENTRY USED UNITRADE#C9ii CAT $40 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional condition issues will be mentioned. SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. All shipments valued over $100 will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $250(including shipping) Any purchases higher than ... morethis amount will be invoiced and must be paid for separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amounts. For the following countries all shipments valued at over $60 must be sent by insured mail at an additional cost of $5. These currently include Romania. Russia, China, Brazil, and any other country that the seller at his sole discretion determines to be high risk. INVOICE Buyers please wait until I send an invoice with the correct shipping cost instead of doing self checkout as this will save me time in making a Paypal request for additional shipping or tax costs. SHIPPING TIME All items are sent within 5 business days of receipt of payment. It then takes approximately 1-2 weeks(sometimes longer) for the postal system to ma
|
|
|
GB George VI SG#465 WK Sideways Cat 40 lb + EXETER CO.
Great Britian Stamp King George VI SG#465 WK Sideways Cat 40 lb +
|
|
|
SG 450 GT BRITAIN USED CAT £40
SG 450 GT BRITAIN CAT £40 SEE SCAN FOR CONDITION OF PERFS
|
|
|
QEII yr2000 'Trees' £10.80 prestige book. Sg.DX26. Cat £40.
QEII yr2000'Trees' £10.80 prestige book. Sg.DX26. Cat £40. Sg.DX26 prestige booklet. Fine and complete. Face value now £10.80. Cat £40.00. Following payment. I always endeavour to despatch within 24 hrs. Please check postage options and conditions. Combined items totalling £50+ will have to be sent'signed-for' please. Tracked services are available. If these are not opted for. Items are sent at buyers risk. check out my other items. For Victorian or early material see emagic-qv. Positive feedback always reciprocated and I thank you in advance for any four or five star ratings. If you have any issues. Please get in contact before leaving low ratings and I will strive to settle the matter favourably. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146c5eb8b5b-0x106-
|
|
|
QEII 1988 'F.T.' £5.00 prestige book. Sg.DX9. Cat £40.
QEII 1988'F.T. £5.00 prestige book. Sg.DX9. Cat £40. Sg.DX9'F.T. prestige booklet. Fine and complete. Cat £40. Following payment. I always endeavour to despatch within 24 hrs. Please check postage options and conditions. Combined items totalling £50+ will have to be sent'signed-for' please. Tracked services are available. If these are not opted for. Items are sent at buyers risk. check out my other items. For Victorian or early material see emagic-qv. Positive feedback always reciprocated and I thank you in advance for any four or five star ratings. If you have any issues. Please get in contact before leaving low ratings and I will strive to settle the matter favourably.
|
|
|
RWANDA**SPACE-SATELLITE ANTENNA COMMUNICATION-SHEET-25vals 10 Fr-Cat 40$-Congo
RWANDA*SPACE-SATELLITE ANTENNA-SHEET-25stamps 10 Fr-Cat 40$-CongoCombined shipping of lots is possible to save cost-Congo-Kongo Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Thailand - Scott Cat# 694 Unused Hinged CV $1.40
Thailand- Scott Catalogue# 694 Unused Fine Hinged. Catalogue Value $1.40. Complete set of 1 Stamp.
|
|
|
Somaliland 1904 1r Grey Green Crn CC SG 41 Scott 27-35 VFU Cat £40($68)
Somaliland 1904 1r Grey Green. Watermark Crown CC, SG 41 Scott 27-35 VFU Cat £40($68) Very fine used 1 rupee value with great color. Very nice CDS cancel and generally clean reverse side with no pencil notes. Lovely quality 1r high value in very fine used condition. I have a large number of Superb Great Britain. British Commonwealth and foreign items for sale this week, please click View seller's other items for details: View seller's other items Condition notes for mint stamps UMM = Unmounted Mint- never previously hinged(nh) mint stamps with no gum disturbance VLMM = Very Lightly Mounted Mint- No hinge remainder but has very slight gum disturbance which may have been caused by a hinge. LMM = Lightly Mounted mint clear evidence of having been previously mounted but light with full original gum MM = Mounted Mint- clear evidence ... moreof having been mounted with hinge remainder(s) on back Unused = No gum If you feel that the item has not been described correctly then please return within seven days of receipt for a full refund. Michigan Residents Please note that invoices will include an additional 6% sales tax. Notes: Shipping In order to comply with Ebay directives please note the following All Items from $0-$24.99 will be sent with proof of posting and tracking at $2.53 US. $4.25 overseas All items from $25- $74.99 will be sent with proof of posting and tracking at $2.53 US. $6.75 overseas All items from $75- $124.99 will be sent with Registered post with full tracking at $2.53 US. $13.50 overseas All items from $125-$249.99 will require proof of posting. Tracking and full insurance at $2.53 US, $24.00 overseas All items from $250- $5.000 will require proof of posting, tracking, full insurance and signed proof of delivery at $2.53 US, $37.00 overseas All items will be very securely packaged. All multiple purchases will be combined and sent at the postage cost of one item given that it does not exceed the limits noted above. Please note that it is the Ebay seller who provides buyer protection. Ebay will n
|
|
|
Somaliland 1904 1/2-12a Definitives Crn CA SG 32-40 Scott 27-35 VFU Cat £58($98)
Somaliland 1904 1/2-12a Definitives. Watermark Crown CA, SG 32-40, Scott 27-35, VFU, Cat £58($98) Very fine used short set to the 12a value all with good color. Nice CDS cancels several with tiny pencil id's generally with otherwise very clean reverse sides. Lovely quality complete set of the small size stamp to the 12a value in very fine used condition. I have a large number of Superb Great Britain. British Commonwealth and foreign items for sale this week, please click View seller's other items for details: View seller's other items Condition notes for mint stamps UMM = Unmounted Mint- never previously hinged(nh) mint stamps with no gum disturbance VLMM = Very Lightly Mounted Mint- No hinge remainder but has very slight gum disturbance which may have been caused by a hinge. LMM = Lightly Mounted mint clear evidence of having ... morebeen previously mounted but light with full original gum MM = Mounted Mint- clear evidence of having been mounted with hinge remainder(s) on back Unused = No gum If you feel that the item has not been described correctly then please return within seven days of receipt for a full refund. Michigan Residents Please note that invoices will include an additional 6% sales tax. Notes: Shipping In order to comply with Ebay directives please note the following All Items from $0-$24.99 will be sent with proof of posting and tracking at $2.53 US. $4.25 overseas All items from $25- $74.99 will be sent with proof of posting and tracking at $2.53 US. $6.75 overseas All items from $75- $124.99 will be sent with Registered post with full tracking at $2.53 US. $13.50 overseas All items from $125-$249.99 will require proof of posting. Tracking and full insurance at $2.53 US, $24.00 overseas All items from $250- $5.000 will require proof of posting, tracking, full insurance and signed proof of delivery at $2.53 US, $37.00 overseas All items will be very securely packaged. All multiple purchases will be combined and sent at the postage cost of one item given that it does not exceed the limits
|
|
|
Dominica QV 1877-79 (Wmk CC) 2½d Red Brown SG6 VF Used Cat £40
Dominica QV 1877-79(Wmk CC) 2½d Red Brown SG6 VF Used. Scuff bottom middle right. M/Mint = The stamp has been mounted and has hinge remains on the stamp. LM/Mint = The stamp has been mounted no hinge remain but there will be some gum disturbance. VLM/Mint = The stamp has been mounted. No hinge remain and very little gum disturbance. MNH= The stamp has never been mounted. I will try and describe any errors/faults that can not be seen on the picture. However I am human and will sometimes overlook something. My 100% full refund is there for these hopefully few occasions. I am breaking a Large British Commonwealth Collection. They will all go on e-bay. 100+ lots on now, add me to your favorite sellers then e-bay will let you know every time I place new lots on e-bay. I have 100+ lots on at present. To view these lots go to the top of this ... morepage and click on view sellers other items. All my lots carry a full 100% refund if the winning bidder is not completely satisfied. Powered by
|
|
|
New Guinea Scott C28-40 (1932-34) Mint/Used H VF, Cat. Value $65.80
New Guinea Scott C28-40(1932-34) Mint/Used, Hinged, Very Fine, Incomplete Set, Cat. Value $65.80. What you see is what you will receive. If you purchase more than one item we will combine for one shipping charge. If they are combined into one invoice. Sales to California residents will include sales tax. Please wait for our invoice before paying. We accept PayPal only. As per Ebay policy. Please pay within three days or advise us if there will be a delay in paying. Shipping to the US- $1.00; outside US- $2.00. Shipment will be made by First Class mail unless registered mail is requested. See additional shipping requirements below. Attention buyers in RUSSIAN FEDERATION. UKRAINE, BRAZIL and ALL AFRICAN COUNTRIES: All shipments above $15 will require registered First Class international shipping for $15. No exceptions. Please wait for our invoice ... morebefore paying. If payment is made prior to receiving our invoice. Additional shipping fees will be invoiced through PayPal. Shipping will not occur until full shipping charges have been received. ALL DOMESTIC ORDERS over $100 will be shipped Certified First Class mail for $7.50. ALL FOREIGN ORDERS over $100 will be shipped Registered First Class international mail for $15. We will not be responsible for any lost or damaged items. And no refunds will be made unless they are shipped certified or registered. By bidding on our items. Or purchasing“Buy It Now” items, you confirm that you agree with these terms. Returns are accepted if you notify us within three days of receipt.
|
|
|
Rhodesia (BSAC) - 1890 6 issues to 8d Used Cat £40
Rhodesia(BSAC) 1890 6 issues to 8d Used Cat £40- See scan See scan for condition. Will post promptly and quickly at buyers risk unless signed for postal option chosen.
|
|
|
FRANCE, SC#2552//2573, small group, MNH, Cat $8.40, issue 1997
FRANCE SC#2552/2573. MNH, issued 1997. I am selling my complete collection of French stamps. Check back often, I might list something you need. I will be starting my auctions at a very low opening bid. The stamps you see are the ones you will receive so please check the scans carefully. I will combine other auctions for shipping. This is just a hobby for me and I am very slow at listings auctions so please check back. As everyone on eBay does, I value my feedback. If I make a mistake let me know and I will resolve your problem. Please note: I am using a Scott catalog for 2012 for pricing information.
|
|
|
Zara (German Occupied Croatia) Michel #8 Used (1943) Cat Val €40 / $54.00
Very good condition. See scan for centering. Cancellation, etc. Free Shipping to U.S. only. International buyers pay shipping. We are not responsible for uninsured losses in the mail. Important note for customers outside of the United States: International First Class mail is not registered and cannot be tracked. Traced or insured. While we have lost very few items in the mail, international buyers may wish to have their purchases shipped via Registered Mail or Priority Mail. Please contact us for additional charges. Please note: Placing a bid on this item indicates that you agree to the shipping and handling charges. If you have any questions. Please contact us.
|
|
|
FRANCE, SC#B691-#B696, Complete set, MNH, Photographers, Cat $8.40, issue 1999
FRANCE SC#B691-B696. MNH, issued 1999. I am selling my complete collection of French stamps. Check back often, I might list something you need. I will be starting my auctions at a very low opening bid. The stamps you see are the ones you will receive so please check the scans carefully. I will combine other auctions for shipping. This is just a hobby for me and I am very slow at listings auctions so please check back. As everyone on eBay does, I value my feedback. If I make a mistake let me know and I will resolve your problem. Please note: I am using a Scott catalog for 2012 for pricing information.
|
|
|
FRANCE, SC#B677-B682, Complete set, MNH, Adventure Heroes,Cat $8.40, issue 1997
FRANCE SC#B677-B682. Complete set, MNH, issued 1997. I am selling my complete collection of French stamps. Check back often, I might list something you need. I will be starting my auctions at a very low opening bid. The stamps you see are the ones you will receive so please check the scans carefully. I will combine other auctions for shipping. This is just a hobby for me and I am very slow at listings auctions so please check back. As everyone on eBay does, I value my feedback. If I make a mistake let me know and I will resolve your problem. Please note: I am using a Scott catalog for 2012 for pricing information.
|
|
|
NETHERLANDS (3854) - NR. 641/645 MNH (cat.€ 40,00) PERSONS
LOOK IN OUR STORE FOR MORE(Please note that it is not possible to combine auction items from Ebay USA with shop item on Ebay Netherlands. So you get always two invoices. ALWAYS reasonably/good quality What you see is what you get. Iff something is wrong, please send us a mail, we can make mistakes to. look for more in our shop Shipping from Corfu- Greece. Ebay U.S.A. DAILY ROUTE. POSSIBLE 5/12 DAYS. Shipping always priority mail: From GREECE to the USA/ CANADA and other country's outside Europe outside Europe(EU) Shipping always priority mail: From GREECE to the USA/ CANADA and other country's outside Registered mail: = + $ 5.00(registered+express: + $ 10,00) PayPal is the fastest and safest way of payment. NB: If you pay through PayPal all shipments over US $ 30.00/ EU € 25,00 must be sent by registered mail because of changed PayPal ... morepolicy. After the auction has ended you will receive a mail from us within 48 HOURS, if you are not finished with bidding please mail us. you can save on shipping costs! We always are shipping on Tuesday and Thursday after payment is arrived. A Full money back guarntee on all items. All items must be returned in the same way as sent, all returned items will have postage both ways paid for. For europe priority mail: DAILY ROUTE. POSSIBLE 3/7 DAYS. Shipping always priority mail: From GREECE to the EUROPE country's Shipping always priority mail: From GREECE to the EUROPE Registered mail: = + $ 5.00(registered+express: + $ 10,00) Mint* = MNH(postfris) Mint* = MH(Hinged/Falz) =(postfris/plakker of met plakker/resten) Used =(Gestempeld) Ongebruikt zonder gom wordt vermeld, No hum is mentioned. ALL NUMBERS we use FROM MICHEL CATALOGUE. FOR MORE EUROPE LOOK IN OUR SHOP. Check out my! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Serbia Scott Cat, #87-97, MNH, Listing #L241 CV=$20.40
You are bid ding on Serbia Scott Cat. 87-97, MNH, Listing#L241 CV=$20.40. Please examine the stamp carefully before bidding. Bid with confidence. Please take a look at my other listings. Thanks. Please contact me before bidding if you have any questions. I strive for total cust o mer satisfication and to provide you with a 5 star service. Once you receive the item. Please remember to leave a"Positive feedback" and"5 Stars" on the eBay rating scale. This helps me to maintain high standards on eBay aiming towards customer satisfaction. If you have any issues after you receive the item, contact me and I am definite that I will resolve it to your satisfaction. S hipping and handling is $ 1.00. Payment is expected within 5 days after the auction has ended. I only accept Paypal and will mail item within 5 business days after ... morethe day payment is received. If insurance is requested. Buyer will pay for insurance.
|
|
|
LYNDEX CAT 40 BILZ #3 TENSION COMPRESSION TAPPER STOCK #B49
LYNDEX TENSION COMPRESSION TAP CHUCK USES SIZE#3 BILZ TYPE ADAPTERS CAT 40 SHANK. Good u sed condition. Actual item pictured. Payment due within 48 hours of purchase. Check. M/o, credit card, and PayPal accepted. $11.50 for USPS Priority Mail shipping with tracking. STOCK#B49 Thanks for looking!
|
|
|
BILZ #1 TENSION COMPRESSION TAPPER W/ SANDVIK CAT 40 ADAPTER STOCK #A15
BILZ TENSION COMPRESSION TAP CHUCK USES SIZE#1 ADAPTERS SANDVIK CAT 40 ADAPTER. Very good u sed condition. Actual item pictured. Payment due within 48 hours of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK#A15 Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-146c65a501f-0x101-
|
|
|
Macau P-81A 50 Patacas 2005 (2006) Unc Cat. $40
Paypal Only. All items will be sent register mail from Vietnam regardless of quantity for $5.00. No exception. Any questions, please don't hesitate to email us. Thank you for your interest. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KRONE ADC TE TYCO K610 JACKS CATEGORY CAT 5E CAT5E BLUE 6467 5 181-40 6467518140
This is a used blue Krone/ADC/Tyco/TE CAT5E jack. Model 6467 5 181-40. Each jack has been carefully removed and inspected for damage. ADC K610 jacks are an integral part of the TrueNet® Category 5e channel solution. Tuned together with other TrueNet Category 5e components and cable. K610 jacks are critical to the delivery of zero bit-error network performance. K610 jacks feature LSA-PLUS® silver-plated. 45º angled contacts for the most reliable and robust connection available. Features: Compatible with any TrueNet® modular faceplate. Modular furniture faceplate, surface box and modular patch panel• Accepts either KRONE® or 110 tool for conductor termination Please contact with any questions or offers.
|
|
|
Lladro Grayish Bronze Color Egyptian Cat #12130 Only 40 Ever Made Retired 1985
Lladro Grayish Bronze Color Egyptian Cat#12130 Retired 1985. This piece is in perfect condition no chips. Cracks, or crazing this was a very short run piece only being made from 1983 till 1985. This piece measures almost 13 1/2 inches tall by about 8 1/2 inches at it's widest point. Rare Lladro Valencia has confirmed that about 40 had been made. This item will be insured and I will ship this via United States Postal Service Parcel Post or Priority Mail it's up to you just select the way you want to ship during check out. But for international shipping it will ship Priority Mail. FOR INTERNATIONAL BUYERS PLEASE NOTE DO NOT ASK ME TO CHANGE ANY CUSTOM DOCUMENTS AS I WILL HAVE TO REPORT THAT TO EBAY. Please note that I pack everything that I ship very secure with a lot of packing so if the shipping seems high please understand that the ... moreitem will be very secure and protected during shipping. If you do win this auction I ask that you pay as soon as possible if there is a problem that you need a few days please message me to let me know so we can work something out. I am more then willing to work with you if you need a few days I also ask that you please message me as soon as you receive the invoice so that I know that you received it. I have noticed lately that sometimes people are not receiving the invoices the first time they are sent out. I only accept PayPal for my auctions thank you and I wish you luck bidding.
|
|
|
Vintage Huge Handcrafted Wood Witch Black Cat-Halloween Decor 40" tall RARE HTF
WELCOME TO MY AUCTION This adorable large wooden witch with broom and black cat can add so much style and class to your Halloween decor. You are sure to get lots compliments. Handcrafted! Measures about 32 in. without hat and 40 in. with hat Very heavy item- Solid Wood! One-of-a-kind Payment MUST be made within 3 days of auction PLEASE bid now so you do not forget LATER. for stopping by! Smoke-free environment. See picture as it is more descriptive than words Save time. Money, gas, and avoid the crowds.Shop on eBay! International Bidders Welcome INTERNATIONAL CURRENCY CONVERTER Please click on the link to convert bidding price. Or shipping prices, into your currency: XE.com Personal Currency Assistant If you like unique items. You MUST visit my mainzamrhein69 Please add me to your favorites list! I do not claim to be an expert on the items ... morelisted and describe them to the best of my knowledge. Most of the items I sell are vintage or antique and therefore could have some imperfections if only from age alone. Please bid according to the picture you see. Insurance: Included in shipping& handling. I pack items to arrive undamaged. But if an item does receive damage in shipping, please contact me immediately. MAY GOD BLESS YOU On Sep-17-07 at 17:32:36 PDT. Seller added the following information: ShipSaver.
|
|
|
Briney 1/4" Cat 40 End Mill Holder, # V40E-025-250, Used, WARRANTY
Title: Briney 1/4" Cat 40 End Mill Holder. V40E-025-250, Used Description: Our Internal Stock# TC-1-7(05-12-14 RN) You are about to purchase the following item: 1- Briney 1/4" Cat 40 End Mill Holder. V40E-025-250, Used Catalog# V40E-025-250 CAT 40 Taper 1/4" Capacity 1 Set Screw 1-5/8" From bottom of V-Flange to End of Holder Made in USA This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping ... moreis based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We
|
|
|
VTG Blue & White Embroidered Laundry Fabric Bag Duck Puppy Dog Cat 40's 50's
This listing is for a vintage hand embroidered laundry bag. It features a duck. Kitten, and puppy. Item looks to be from the 1940's or 50's. It shows some wear. One corner is stained(I have not tried to clean) There is also a small section where the seam has come undone. Please see close up photos of item to judge overall condition for yourself. Please message with any additional questions. Thank You for Looking! Will Ship to Canada $10.00 Will Ship to Australia $16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146c9a03e80-0x111-
|
|
|
3/4-16 CAT 40 Taper Tool Holder Shell Face Mill Cutter Spanner Adapter End Bolt
Item. This is the bolt that goes in to the end of the shell mill adapater to hold the Shell Mill Cutter to the ToolHolder adaptor Manufacturer. Unknown Diameter. 3/4" diameter and 16 thread per inch tpi RIGHT HAND THREADS Head Diameter. 1.875" Head Thickness is.381" Thread length is 1.125" Condition. Nice used. You need a spanner wrench to tighten it. The spanner slots measure.341" wide x.250" deep also can be used on nmtb and bt holders This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. ... moreAnd if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mil
|
|
|
Gnome GNOMES Drinking Playing Music CAT Cats Dancing Dog Ed. P&F c 1930-40
Interesting vintage PC- Gnome. GNOMES- Drinking, Playing Music- CAT, Cats- Dancing, Dog, Ed. P&F ser.6 c 1930-40, has some corners faults couple of spots on top- see scans of both sides. In good condition. Registered delivery worldwide: under 50 gr. $4.90- from 50 till 100 gr. $5.90- from 100 till 250 gr. $8.90- above 250 gr. Payment methods: 1) cash in person or other with appointment. 2) To EU customers can be convenient bank-transfer to account(apply for IBAN number) 3) Moneybookers(please ask before sending) 4) PayPal. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
New Old Stock Realistic high efficiency TWEETER HORN Cat. No. 40-1228A
UP FOR AUCTION: New old stock. Untested. Realistic high efficiency TWEETER HORN Cat. No. 40-1228A in original box. Original paperwork included in original box. Box reads an excellent replacement for hi-fi speakers or to add brilliant highs to present systems. Handles 30 watts music power, 4000-16,000 Hz response, All-Aluminum construction, 8 OHMS Impedance. CONDITION: New old stock. Untested sold as is no way to test. PAYMENT POLICY: Payment is expected within 3 days of end of auction- unless notified in advance. Items will be subject to relisting and EBAY notification for non-payment. SHIPPING: $8.50 U.S. Only. International bidders must contact us for shipping info. ANY QUESTIONS PLEASE ASK! We try to describe all items to the best of our ability. If we have made an error please contact us and we will try to fix the problem with the buyer. ... moreWe must be contacted within 5 days of sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146ca926b35-0x110-
|
|
|
UNIOP OPERATOR INTERFACE PANEL CAT#CP02R-04-0045 HW33A SW4.40 FW32
UNIOP OPERATOR INTERFACE PANEL CAT#CP02R-04-0045 HW33A SW4.40 FW32 NC INDUSTRIAL SUPPLY. PLEASE CALL FOR EXPEDITED SHIPPING! WE ACCEPT CREDIT CARDS! WE SHIP OVERNIGHT UP UNTIL 3:30 PLEASE CONTACT US! WE OFFER COMBINED SHIPPING. 704)821-1104. Thank you for your interest in our products. You may view more products by visiting our eBay store at. Http:stores.ebay.com/NC-INDUSTRIAL Shipping Details. All shipping originates from 28110 zip code. We ship within 5 business days after payment is received. WE ONLY SHIP TO THE U.S.A. AND CANADA LOCAL PICKUPS ARE FREE OF SHIPPING CHARGES. FREIGHT SHIPMENTS. Large items that require an LTL shipment generally go out within 5 business day after payment is received.Seller must provide us with accurate shipping info on freight shipments. Information that we need is: Business Name. Shipping Address, Contact ... moreInformation, including phone number. Also, please inform us if the receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. Sales Policy: We consider your bid as a contract. Please only place a bid if you're serious about buying an item. If the item has not been paid for within 3 business days the item may be offered to the next highest bidder or re-listed.Payment is due within 3 days of purchase unless otherwise discussed between the buyer and the seller. Payment Details: We accept PayPal Payments or Cash for local pickups. We do not accept personal or business checks. Sign up for PayPal. It's the fast. Easy and secure way to pay online. Returns: We guarantee items to arrive as stated in auctions. IF YOU HAVE ANY QUESTIONS PLEASE ASK BEFORE BIDDING! Feedback: We like for our customers to be completely satisfied with their purchase. If your transaction is not to your satisfaction. Please contact us BEFORE leaving any feedback. Inform us of the issue and we will do our best to resolve the problem in order to receive positive feedback. Good communication ensures a successful transaction and resolution prior to advance posting of perma
|
|
|
Lot of 40+ Misc. Barbie Accessories (dog cat purse hat brush helmet pot)FreeShip
Please look at the picture with the magnifier to see all the little pieces.
|
|
|
Federal Pacific Electric 200amp 2pole Bus Bar 20/40 space Use with cat#L120-40
This is a Federal Pacific Electric 200amp 2pole bus bar. 20 Fullsize breakers fit or 40 Thin size. I sell all the breakers to fit this as well.Use With Box No. Cat No. L120-40. Please visit our store B And C Discount Breakers. On Sep-07-13 at 04:13:48 PDT. Seller added the following information:
|
|
|
6 USED TECNARA CAT 40 TOOL HOLDERS 140-303-3 3/8" NO RESERVE
6 USED CAT 40 TOOL HOLDERS 6 TECNARA 140-303-3 3/8" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146cbbfe583-0x10f-
|
|
|
5 USED COMMAND CAT 40 TOOL HOLDERS C4E4-0375 3/8" NO RESERVE 2
5 USED CAT 40 TOOL HOLDERS 5 COMMAND C4E4-0375 3/8" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 USED VALENITE CAT 40 TOOL HOLDERS V40CT-E50 1/2" NO RESERVE
2 USED CAT 40 TOOL HOLDERS 2 CARBOLOY SYSTEMS CV40-EM1.75-0500 1/2" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-146cbbfe53c-0x10c-
|
|
|
7 USED COMMAND CAT 40 TOOL HOLDERS C4E4-0500 1/2" NO RESERVE
7 USED CAT 40 TOOL HOLDERS 7 COMMAND C4E4-0500 1/2" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 USED TECNARA CAT 40 TOOL HOLDERS 140-301-3 1/4" NO RESERVE
3 USED CAT 40 TOOL HOLDERS 3 TECNARA 104-301-3 1/4" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 USED RICHMILL CAT 40 TOOL HOLDERS CT40-SL 1/4-2.50 1/4" NO RESERVE
3 USED CAT 40 TOOL HOLDERS 3 RICHMILL CT40-SL 1/4-2.50 1/4" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 USED CARBOLOY SYSTEMS CAT 40 TOOL HOLDERS CV40-EM3.00-0250 1/4" NO RESERVE
3 USED CAT 40 TOOL HOLDERS 3 CARBOLOY SYSTEMS CV40-EM3.00-0250 1/4" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-146cbbfe608-0x10f-
|
|
|
2 USED VALENITE CAT 40 TOOL HOLDERS 5/8" AND 3/4" NO RESERVE
2 USED CAT 40 TOOL HOLDERS 2 VALENITE V40CT-E62 5/8" AND V40CT-E75 3/4" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 USED RICHMILL CAT 40 TOOL HOLDER CT40-SL 5/8-3.00 5/8" NO RESERVE
1 USED CAT 40 TOOL HOLDER 1 RICHMILL CT40-SL 5/8-3.00 5/8" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 USED COMMAND CAT 40 TOOL HOLDERS C4E3-0750 3/4" NO RESERVE 2
5 USED CAT 40 TOOL HOLDER 5 COMMAND C4E3-0750 3/4" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 USED CARBOLOY SYSTEMS CAT 40 TOOL HOLDERS CV40-EM1.75-0750 3/4" NO RESERVE 3
3 USED CAT 40 TOOL HOLDER 3 CARBOLOY SYSTEMS CV40-EM1.75-0750 3/4" PLEASE NOTE: 1 HOLDER IS MISSSING THE PULL STUD IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-146cbbfe550-0x111-
|
|
|
USED ACCUPRO CAT 40 TOOL HOLDERS CAT40-7/8-3.50 3/4" NO RESERVE
1 USED CAT 40 TOOL HOLDER 1 ACCUPRO CAT40-7/8-3.50 7/8" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 USED COMMAND CAT 40 TOOL HOLDERS C4E4-1000 1" NO RESERVE
4 USED CAT 40 TOOL HOLDERS 4 COMMAND C4E4-1000 1" PLEASE NOTE: MISSING 1 PULL STUD IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 USED TECNARA CAT 40 TOOL HOLDERS 140-306-3 3/4" NO RESERVE
2 USED CAT 40 TOOL HOLDERS 2 TECNARA 140-306-3 3/4" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 USED RICHMILL CAT 40 TOOL HOLDERS CT40-SL 3/16-4.00 3/16" NO RESERVE
2 USED CAT 40 TOOL HOLDERS 2 RICHMILL CT40-SL 3/16-4.00 3/16" IN GOOD USED CONDITION NO RESERVE NO HANDLING CHARGE AND $15 SHIPPING WHICH INCLUDES INSURANCE I ONLY ACCEPT PAYPAL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
FURNAS CAT NO 42CF35AJ 40 AMP 3 POLE DEFINITE PURPOSE CONTACTOR PN 61445
FURNAS SIEMENS 42CF35AJ PN 61445 40AMP Used T/O Made in Germany Weighs 2# NET Guaranteed not to be DOA Call 731 836-5967 if you have questions or if you need a freight quote– ask for John(owner) or Jim. Payment: I accept PayPal. JH We are selling this item“ As Is” Without” a warranty. If this listing is for a multiple quantity of like items we guarantee the item you receive will be the matching model number and in as good or better condition than the photo(s) and description. Although our items do not come with a warranty. We guarantee them not to be defective. Should they be defective, we will refund the price of the item(s) less shipping– you have 14 days to notify us. Product must be returned for credit– credit will be issued pending inspection. Buyer must pay for return shipping. We do not claim to be experts on any of the items that ... morewe sell. We do the best research we can and represent the item(s) as clearly and honestly as possible. If you have any questions or concerns regarding compatibility or specific technical specifications. We will do our best to answer them. My Zip Code is 38037. If you have any questions. Feel free to call me at 731 836-5967. Flat Rate shipping Lower 48- $35.00. Ltl Shipments- We do not charge for packaging and handling- you pay actual freight and insurance fees. We have access to a number of freight lines which give us deep discounts and we will pass this savings along to the buyer. If you prefer you may use your own source. We have activated“ freight quote” for reference or for application. Shipments to residential addresses usually incur a surcharge of approximately $90.00 to $100.00 extra for a lift gate service. Save by having it picked up at the freight depot or having it delivered to a commercial address. IMPORT DUTIES. TAXES, CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. P
|
|
|
Sg313, 1s deep green & scarlet, good used. Cat £40.
One tiny perf crease. PLEASE HAVE A GOOD LOOK THROUGH MY EBAY SHOP! THERE ARE LOTS OF GB AND COMMONWEALTH STAMPS TO SUIT ALL LEVELS OF STAMP COLLECTING. THANK-YOU. Powered by
|
|
|
UGANDA 2007 Comm, Heads of Government SG2537/40 unmounted mint. Cat £11
John Noble Stamps A member of the Philatelic Traders’ Society One week money back guarantee UGANDA 2007 Comm. Heads of Government SG2537/40 unmounted mint. Catalogue £11. Low start- no reserve! Please note we are sorry to say we have had to increase the starting price of our 99p listings as ebay prices have gone up by 25p!
|
|
|
BASUTOLAND 1948 MINT NH SC #39-40 KGVI SILVER WEDDING CAT $45.50
BASUTOLAND 1948 MINT NH SC#39-40 KGVI SILVER WEDDING CAT $45.50 BASUTOLAND 1948 MINT NH SC#39-40 KGVI SILVER WEDDING CAT $45.50 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional or extreme condition issues will be mentioned. Legend: PS- Postal Stationery FL- Folded Letter SFL- Stampless Folded Letter RPO- Railway Post Office CDS- Circular Date Stamp DPO- Dead Post Office SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. If a buyer has bought multiple ... morelots he/she may elect to have them sent as multiple shipments by regular mail with each shipment not exceeding $100. Please note that in some cases the shipping may be slightly higher due to the fact that the item is oversize. If it has to be mailed in a 8.5 x 11 size envelope the shipping rate is an additional $1 then the quoted rates. All shipments valued over $100 including shipping will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $500(including shipping) Any purchases higher than this total amount will be invoiced separately and paid for and shipped separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 or multiple items shipped together valued over $700 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above thes
|
|
|
COOK IS 1926-28 2/- DEEP BLUE FU SG 90 CAT £40
COOK IS 1926-28 2/ DEEP BLUE FU SG 90 CAT £40.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146cd747a53-0x118-
|
|
|
FIJI 1948 MINT NH SC #139-40 SILVER WEDDING CAT $23.20
FIJI 1948 MINT NH SC#139-40 SILVER WEDDING CAT $23.20 FIJI 1948 MINT NH SC#139-40 SILVER WEDDING CAT $23.20 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional or extreme condition issues will be mentioned. Legend: PS- Postal Stationery FL- Folded Letter SFL- Stampless Folded Letter RPO- Railway Post Office CDS- Circular Date Stamp DPO- Dead Post Office SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. If a buyer has bought multiple lots he/she may ... moreelect to have them sent as multiple shipments by regular mail with each shipment not exceeding $100. Please note that in some cases the shipping may be slightly higher due to the fact that the item is oversize. If it has to be mailed in a 8.5 x 11 size envelope the shipping rate is an additional $1 then the quoted rates. All shipments valued over $100 including shipping will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $500(including shipping) Any purchases higher than this total amount will be invoiced separately and paid for and shipped separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 or multiple items shipped together valued over $700 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amounts. For the f
|
|
|
MALTA 1949 MINT NH SC #223-4 KGVI SILVER WEDDING CAT $40.55
MALTA 1949 MINT NH SC#223-4 KGVI SILVER WEDDING CAT $40.55 MALTA 1949 MINT NH SC#223-4 KGVI SILVER WEDDING CAT $40.55 Please examine lot scan carefully and please send any questions at least 48 hours before the auction closes. Please note that cover condition usually includes normal wear and tear to cover edges. Opening tears and some creases and wrinkles. Only exceptional or extreme condition issues will be mentioned. Legend: PS- Postal Stationery FL- Folded Letter SFL- Stampless Folded Letter RPO- Railway Post Office CDS- Circular Date Stamp DPO- Dead Post Office SHIPPING Shipping is by regular mail $1.99 for Canada and USA and $2.99 for rest of the world. This shipping rate is for up to 3 items. For 4-6 lots it is an additional $1 and for every multiple of 3 lots beyond 6 it will be an additional $1. If a buyer has bought multiple lots ... morehe/she may elect to have them sent as multiple shipments by regular mail with each shipment not exceeding $100. Please note that in some cases the shipping may be slightly higher due to the fact that the item is oversize. If it has to be mailed in a 8.5 x 11 size envelope the shipping rate is an additional $1 then the quoted rates. All shipments valued over $100 including shipping will be sent by Registered mail for an additional $12 to the regular mail rate total. The maximum amount per shipment is $500(including shipping) Any purchases higher than this total amount will be invoiced separately and paid for and shipped separately. Any additional items sent separately will be at a shipping cost calculated on the same basis as the first shipment. Any single item valued at over $250 or multiple items shipped together valued over $700 sent outside of the USA or Canada are to be sent by expedited mail(signature option) exact shipping costs to be determined but please expect it to be in excess of $60. These shipping requirements are not negotiable and are based on the current eBay and Paypal policy which provides no seller protection for fraud or theft above these amounts.
|
|
 |