In 
 
Order by: 
Available to: 
Price: 
 - 
$
69.99
Buy It Now
$0 Shipping
Condition: New
Location: Solon,OH,USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
55
Buy It Now
$0 Shipping
Condition: Used
Location: Clark,SD,USA
1x CAT40 PARLEC C40-10SC3 Collet Chuck Parlec Collet Chucks Collet Series: TG/PG 100, Through Coolant(Yes/No) Yes, Collet System: Single Angle, Taper ... moreSize: CAT40, Shank Type: Taper Shank, Projection(Decimal Inch) 3.0000" Manufacturer Part Number: C40-10SC3, PAY ONLY 1 SHIPPING COST REGARDLESS OF AMOUNT PURCHASED Good used condition as shown in photos 20+ Available Please See All Photos If you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive I go to the post office at everyday at 1.00pm Monday- Friday if an item is bought and paid for before then the item will be shipped the same day if any later it will be the next day A place to receive friendly. Reliable, full service at an affordable price. We hold each of our customers as a top priority.Our promise from our business to our customers is high standards,quality and best prices at a fast shipping pace secured& insured! NO" question asked return policy! within the 14 days of item arrival. Please see terms& condition policy. Inventory Machinist Lathe Tooling of all brands, Gear Hobs. Lathe Chucks, Tool holders(CAT50. CAT40, BT50, BT45, BT40, HSK, VDI, Morse Taper) Capto.Kennametal, Bore Gage setting Rings( 10mm- over 300mm 1/4" 13" Height Stands. All types of Gages, Inspection Equipment and more! 14 Day No Hassle Returns Policy Please subscribe to my eBay Store For Great deals Thank You For Viewing
$
129
Buy It Now
$0 Shipping
Condition: New
Location: Madison Heights,MI,USA
$
31.48
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
54.99
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
89.99
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
40.9
Buy It Now
$0 Shipping
Condition: New
Location: Athens,GA,USA
$
199.95
Buy It Now
$0 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
17.58
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
134.39
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
55
Buy It Now
$12.95 Shipping
Condition: New
Location: Thompson,OH,USA
NEW SIMIS MFG'D BY TECHNIKS PRECISION 3/4" END MILL HOLDER PART# CAT40SLN3/4-1.75(1.75" H7 BORE TOLERANCE BALANCED TO 8.000 RPM TAPER GROUND ... moreTO AT3 FOR MAXIMUM SPINDLE CONTACT
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
199.95
Buy It Now
$14.5 Shipping
Condition: Used
Location: Lansing,MI,USA
$
90.84
Buy It Now
$0 Shipping
Condition: New
Location: Murfreesboro,TN,USA
$
195
Buy It Now
$18.5 Shipping
Condition: Used
Location: Portland,CT,USA
$
113.39
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
113
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
158
Buy It Now
$0 Shipping
Condition: New
Location: Madison Heights,MI,USA
$
74.95
Buy It Now
$14.5 Shipping
Condition: Used
Location: Lansing,MI,USA
$
145
Buy It Now
$15.5 Shipping
Condition: Used
Location: Paramus,NJ,USA
$
210
Buy It Now
$17 Shipping
Condition: Used
Location: Unionville,CT,USA
$
32.69
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
195
Buy It Now
$23 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
37.99
Buy It Now
$12.64 Shipping
Condition: Used
Location: Marcellus,MI,USA
$
72
Buy It Now
$0 Shipping
Condition: New
Location: Madison Heights,MI,USA
$
99.95
Buy It Now
$14.5 Shipping
Condition: Used
Location: Lansing,MI,USA
$
189.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Redford,MI,USA
$
62.95
Buy It Now
$0 Shipping
Condition: New
Location: Mount Vernon,OH,USA
$
167.76
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach,CA,USA
| | | | | | | Techniks part#22269, We are a full line Techniks distributor- contact us for custom quotes and our best pricing guarantee! Balanced to 25.000 ... moreRPM at G2.5. Dimensions for length(l1) 4" and diameter(D) 3.07" T.I.R. 0.0001" measured from taper to collet pocket. Taper ground to AT3 accuracy for maximum contact with spindle. Special Power Coat nut holds up to 75% tighter for best T.I.R. Rigidity, and safety allowing reduced vibration at high speed to extend tool life. Techniks certified for accuracy and balance. Additional collet chucks. End mill holders, retention knobs, collets and collet sets shown in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We sell the entire Techniks line(Contact us for best pricing guarantee) 100% Satisfaction Guaranteed! Others T.I.R. 0.0060" TECHNIKS T.I.R. 0.0001" Gain 10% tool life for every 0.0001" improvement in T.I.R. Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and
$
31.39
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
150
Buy It Now
$0 Shipping
Condition: New
Location: Cayuga,NY,USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
175
Buy It Now
$13.95 Shipping
Condition: Used
Location: Tucson,AZ,USA
$
190
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Los Angeles,CA,USA
$
44.99
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
83
Buy It Now
$10.5 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
31.13
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
69.99
Buy It Now
$13.75 Shipping
Condition: New
Location: Eagle,ID,USA
$
10.95
Buy It Now
$0 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
249.95
Buy It Now
$14.5 Shipping
Condition: Used
Location: Lansing,MI,USA
$
89.99
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
44.69
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
$
61.4
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
16
Buy It Now
Free Shipping
Condition: Used
Location: Westerville,OH,USA
$
65
Buy It Now
$13 Shipping
Condition: New
Location: Unionville,CT,USA
$
195
Buy It Now
$23 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
150
Buy It Now
$40 Shipping
Condition: Used
Location: Portland,CT,USA
$
99.95
Buy It Now
$14.5 Shipping
Condition: New
Location: Lansing,MI,USA
$
109
Buy It Now
$0 Shipping
Condition: New
Location: Walnut,CA,USA
$
89
Buy It Now
$0 Shipping
Condition: New
Location: Madison Heights,MI,USA
$
39
Buy It Now
$0 Shipping
Condition: Used
Location: Clark,SD,USA
$
240
Buy It Now
$23 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
65
Buy It Now
$10.5 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
64.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Cape Neddick,ME,USA
C4003-0033 CAT40 to JT33 taper toolholder. Appears slightly used. Very good condition. Came in with some mixed tooling with a machine purchase, I have ... moreno use for this taper.
$
675
Buy It Now
$15 Shipping
Condition: Used
Location: USA
$
29.69
Buy It Now
$0 Shipping
Condition: New
Location: Bordentown,NJ,USA
$
88.99
Buy It Now
$9.99 Shipping
Condition: New
Location: Sunnyvale,CA,USA
$
8.04
Buy It Now
$0 Shipping
Condition: New
Location: La Puente,CA,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
 In 

Past Items  
 
Cat 40 Taper 1/2" End Mill CNC Tool Holder ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3442 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
Inventory Number: 07120330015 Manufacturer: Description: 3 MIXED ERICKSON TOOL END MILL TOOL HOLDERS. 1/2" 3/8" BORES, CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: TWO: B-123423(1/2" BORE) ONE: CV40EM038250(3/8" BORE) BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have ... moreit removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items
Inventory Number: 07120330014 Manufacturer: Description: ERICKSON TOOL C-145059 MICRO-ADJUSTABLE BORING TOOL HOLDER. CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 3-1/4" DIAMETER. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The
Inventory Number: 07120330013 Manufacturer: Description: ERICKSON CV40SM125212 MICRO-ADJUSTABLE BORING BAR TOOL HOLDER. CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 3" DIAMETER, 5/8" DIAMETER BORE. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE pho
Inventory Number: 07120330012 Manufacturer: Description: ERICKSON C-123401 TENSION COMPRESSION SAFE-DRIVE TAP HOLDER. CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ... moreONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be funct
Ivory Coast Stamp#11 ~ Mint Hinged ~ Cat. Value: 40.00
KAISER EWB 41E x KA4 AUTO-BALANCE FINE BORING HEAD PART NO. 310.415. 1.61" 2.13" RANGE 1 DIV. =.0005" DIA. KA4 CONNECTION PARLEC C40-PC4-6 CAT 40 ADAPTER Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $11.50 for USPS Priority Mail shipping with tracking. STOCK#C1 Thanks for looking!
Inventory Number: 07120330011 Manufacturer: Description: ERICKSON C-145059 MIRCO-ADJUSTABLE BORING TOOL HOLDER. CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 4-1/4" DIAMETER. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item
Inventory Number: 07120330009 Manufacturer: Description: 2 ERICKSON B-123427 END MILL TOOL HOLDERS. 1" BORE, CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 2. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY ... morecombine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally
Inventory Number: 07120330008 Manufacturer: Description: ERICKSON B-123418 KENLOC KLSR-3-CN4-C MILLING FACE MILL. CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 3" DIAMETER. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item wi
LOT C3618 WE ARE OFFERING A CAT40 3/8" DIA END MILL HOLDER THIS HOLDER IS IN GREAT CONDITION YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
LOT C3612 WE ARE OFFERING A CAT40 ER16 COLLET CHUCK THIS HOLDER IS IN GREAT CONDITION YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
LOT C3617 WE ARE OFFERING A CAT40 1" DIA END MILL HOLDER THIS HOLDER IS IN GREAT CONDITION YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
Komet RB Boring Head ABS63 FK1 with Cat 40 Taper Tool Holder Boring head 2 1/2" diam Boring bar capacity 5/8" diam 0.001" marking ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3467 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL Sales
PARLEC CAT-40 END MILL HOLDER- USED PARLEC CAT-40 END MILL HOLDER INVENTORY# 4244 SPECIFICATIONS MODEL: C40-87EM3 SPINDLE TAPER: CAT 40 ENDMILL CAPACITY: 3/4" ENDMILL DEPTH: 1 3/4" LENGTH: 6 1/2" WEIGHT: 3 lbs. 3 oz GOOD CONDITION- AS PICTURED SHOP MORE MILLING ACCESSORIES HERE! FOB OUR FLOOR CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show ... moreoptional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more i
Note number in brackets in auction title is simply my inventory number. My Catalog Number and value is from 2007 Scott. Buyer gets the exact Item shown in the photo. See my other extensive selection of stamps on ebay also. All my stamps guaranteed genuine. Please consider my mint stamps to be hinged unless I indicate NH in the title. Payment in US dollars via paypal is great for payment anywhere in the world that I ship to. For buyers in Australia. New Zealand and Canada I can accept payment in Australian, New Zealand or Canadian dollars converted at the wholesale rate listed on Bloomberg so you wont incur any exchange fees by paying in your own currency. Email for details on how to pay in your own currency Buyer add $2.50 shipping. If possible I will combine items to reduce overall shipping costs but please pay within seven days of winning ... moreyour first item. Due to excessive post office problems I do not ship to Italy. India, Russia or Brazil Powered by The free listing tool. List your items fast and easy and manage your active items.
Lyndex C40R5-0875-3.66#2 Quick Change Rigid Tap Collet Chuck CAT 40 Taper. CAT 40 taper Big diameter 1.75" Taper length 2.687" retaining bolt thread 5/8"11#2 collet chuck projection 3.546" from the bottom of the flange nose diameter 2" flange 0.628" thick, retaining bolt not installed Used. Functional tool. Some small pockmarks from surface rust all over. Retaining bolt not installed but I have some for sale separately Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
HPI ER32 COLLET CHUCK CAT 4 0 SHANK Used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $ 9.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#A 29 Thanks for looking!
Nikken Cat 40 Taper Keyless Drill Chuck Model NPU8-11OU 5/16" Capacity ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3419 THERE IS A $15.00 HANDELING CHARGE IN ALL INTERNATIONAL SALES
Maldive Islands Stamp#117-123 ~ Mint never Hinged ~ Cat. Value: 18.40 Free Shipping!
Maldive Islands Stamp#496-501 ~ Mint never Hinged ~ Cat. Value: 6.40 Free Shipping!
High Speed 12.000 CAT 40 1" x 4" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 12.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22925, CAT 40 x SLN 1" 4" 1" 4" Three reason to buy TECHNIKS ... moreTooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40 collets, collet set
High Speed 10.000 CAT 40 1-1/4" x 4.6" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 10.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22927, CAT 40 x SLN 1-1/4" 4.6" 1-1/4" 4.6" Three ... morereason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40 c
9 Pcs. High Speed CAT 40 Extended End Mill Holders Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best end mill holders on the market. CAT 40& CAT 50 are production balanced to G6.3@ 12.500 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduce tooling cost. Best in industry! Kit Includes: Description d1 l1 Part No. CNC Code CAT 40 1/8" 6" Extended Length End Mill Adaptor, 1/8" 6.00" 22907-6, ... moreCV40 1/8XL, CAT 40 3/16"6" Extended Length End Mill Adaptor, 3/16" 6.00" 22909-6, CV40 3/16XL, CAT 40 1/4"6" Extended Length End Mill Adaptor, 1/4" 6.00" 22911-6, CV40 1/4XL, CAT 40 3/8"5" Extended Length End Mill Adaptor, 3/8" 5.00" 22915-5, CV40 3/8XL, CAT 40 1/2"4.63" Extended Length End Mill Adaptor, 1/2" 4.63" 22918, CV40 1/2XL, CAT 40 5/8"5.75" Extended Length End Mill Adaptor, 5/8" 5.75" 22920-5.75, CV40 5/8XL, CAT 40 3/4"5" Extended Length End Mill Adaptor, 3/4" 5.00" 22922, CV40 3/4XL, CAT 40 1"6.00" Extended Length End Mill Adaptor, 1" 6.00" 22925-6, CV40 1.0XL, CAT 40 1-1/4"6.00" Extended Length End Mill Adaptor, 1-1/4" 6.00" 22927-6, CV40 1.25XL, Techniks tool holders and our ER Collet System improves cutting tool life& saves you money! Cutting tool life is reduced by 10% with every.0001" of T.I.R. The rigidity and accuracy of Techniks tool holders minimizes T.I.R. So you can achieve maximum tool life. EACH OF THESE TOOLS IS FULLY GUARANTEED AS TO PERFORMANCE AND OUR NO QUESTIONS ASKED MONEY BACK
7 Pcs Techniks CAT 40 ER 16-4" Collet Chuck Kit-25000 Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best collet chuck on the market. Balanced to 25.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Kit Includes: Description Part# 6 Pcs. CAT 40 High Speed Balanced upto 25.000 RPM ER 16 x 4.00" Collet Chucks. Technical Specification: ... morePart No. Description L1 D Collet Max. Shank T Wrench 22227, CAT 40 x ER 16-4.00, 4.00" 1.26" ER16.406" M10 x 1.5, 04609, 22227, 1 Pc. ER 16-A Hex Collet Nut Wrench Proper torque on the collet nut reduces collet wear. Keeps tools securely in tool holder& saves you time& money. Technical Specification: Part No. Description Nut Type Length(mm) Width(mm) 04609, ER 16-A Wrench, Hex, 140, 53 04609, Techniks tool holders and our ER Collet System improves cutting tool life& saves you money! Cutting tool life is reduced by 10% with every.0001" of T.I.R. The rigidity and accuracy of Techniks tool holders minimizes T.I.R. So you can achieve maximum tool life. EACH OF THESE TOOLS IS FULLY GUARANTEED AS TO PERFORMANCE AND OUR NO QUESTIONS ASKED MONEY BACK IRON CLAD RETURN POLICY IS IN EFFECT WITH THESE TOOLS JUST AS IT IS WITH OUR HIGH PERFORMANCE LINES.Be sure to buy our Techniks collets. Buy My Techniks Collets& Collet Sets TG-75. TG-100& TG-150 DA-180. DA-100, DA-200& DA-300 Look at my other Kurt. Techniks, Lyndex-Nikken, Valenite& Bison offerings Techniks BT. CAT CNC Collet Chucks Lyndex BT. CAT CNC Collet Chucks Huot Tool Scoots Shipping In
24 Pcs. High Speed Balanced CAT 40 CNC Tooling Kit Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best end mill holders on the market. CAT 40& CAT 50 are production balanced to G6.3@ 12.500 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduce tooling cost. Best in industry! Kit Includes: Description Part No. CNC Code 1 Pc. CAT 40 1/8" 2-3/8" Standard Length End Mill Adaptor, 22907, CV40 1/8R, 1 Pc. ... moreCAT 40 3/16" 2-1/2" Standard Length End Mill Adaptor, 22909, CV40 3/16R, 1 Pc. CAT 40 1/4" 2-1/2" Standard Length End Mill Adaptor, 22911-2.5, CV40 1/4R, 1 Pc. CAT 40 5/16" 2-1/2" Standard Length End Mill Adaptor, 22913-2.5, CV40 5/16R, 1 Pc. CAT 40 3/8"2-1/2" Standard Length End Mill Adaptor, 22915-2.5, CV40 3/8R, 1 Pc. CAT 40 1/2"2-1/2" Standard Length End Mill Adaptor, 22917-2.5, CV40 1/2R, 1 Pc. CAT 40 5/8"3" Standard Length End Mill Adaptor, 22919, CV40 5/8R, 1 Pc. CAT 40 3/4"3" Standard Length End Mill Adaptor, 22921, CV40 3/4R, 1 Pc. CAT 40 1"4" Standard Length End Mill Adaptor, 22925, CV40 1.0R, 1 Pc. CAT 40 1-1/4"4" Standard Length End Mill Adaptor, 22927-4, CV40 1.25R, 1 Pc. CAT 40 1-1/2"4.5" Standard Length End Mill Adaptor, 22929, CV40 1.5R, 1 Pc. CAT 40 High Speed Balanced upto 18.000 RPM ER 16 x 2.76 collet chuck. Rated the best collet chuck on the market. Balanced to 18.000 RPM@ G2.5 0.0001" runout from shank to collet pocket. Insepection report inclued with each holder detailing accuracy& balance. Technical Specification: Part No. Description L1 D Collet
| | LOT OF 2 VALENITE QUICK CHANGE CAT 40 TOOLHOLDERS, Click to View Image Album This is a lot of 2 Valenite CAT 40 toolholders with a quick change end. They have surface rust and I could barely read any part numbers. The hole for the cutting tool is approximately 3/4" in diameter. Buyer pays $12.00 shipping. THANKS FOR LOOKING! Payment, I accept the following forms of payment: PayPal Shipping& Handling, $12.00 USPS Priority Mail® Policies, Payment, I will accept Paypal. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
THIS IS A ALLEN BRADLEY 22B-D2P3N104 SERIES A POWERFLEX 40 UNIT CAME OUT OF A WORKING ENVIRONMENT# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped ... moreout within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item5.
LUXENBOURG.1955. SET OF 4 STAMPS. MICHEL CAT#537/40 CV. EURO. 15.00. = $ 18.00 Powered by The free listing tool. List your items fast and easy and manage your active items.
Australia 2003 Uncirculated set in Royal Australian Mint packaging. Cat $40 Australian Volunteers with the Volunteers 20c. 50c, $1. All Proof& Mint Sets will come housed in their original packaging with certificates UNLESS mentioned otherwise. Outer packaging will show signs of wear as is to be expected with items being sold on the secondary market. Where we have more than one of an item on inventory a"stock" image may be used. Yes we do combine orders. Do not use checkout. Wait for our combined invoice. This is very important! ATTENTION! AUFMERKSAMKEIT. ATENCIÓN, Attenzione, aandacht. Perhatian. Australia Post have increased their rates& changed their services. Services previously available are now gone& have been replaced with others. We have changed our pre-set postage values on eBay to endeavor to simplify a ... morecomplex change. We have also recently had a small number of buyers trying to have their postage reduced or ask us to make false value declarations on postal documents to lessen local import or customs fees. All import& customs issues are the buyers responsibility. All items sold at $50& above will be sent with a signature required on delivery. This is for your security as well as ours Australian Buyers: Registered Mail for letters Parcel Post with signature on delivery for parcels. Overseas Buyers: Registered Post International There are other options depending on weight& destination. If you do not like this policy save you& us a lot of time. DO NOT BID I S WRIGHT ADELAIDE& AUSTRALIAN NUMISMATIC CO. They an integral part of the I S Wright group with a track record in Australia& Internationally for 39 years. With many clients now using the internet to add to their collections. If you are looking to add to your Numismatic. Philatelic or Militaria collections please see what's on offer from our"Sister" stores. Status International Auction House I S Wright Melbourne I S Wright Adelaide I S Wright Sydney I S Wright Ballarat Testmatch Sports Memor
COMMAND 7/8" END MILL HOLDER CAT 4 0 SHANK. Nice u sed condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $ 9.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#A57 Thanks for looking!
SANDVIK 3/4" END MILL HOLDER CAT 4 0 SHANK. 3-5/8" GAUGE LENGTH Very good u sed condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $ 9.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#A 18 Thanks for looking!
You are purchasing the item(s) shown. We currently have eleven available. Slightly used if used at all. In very good condition Part Number on toolholder: 392.5520-50 40 120 Sandvik description: Endmill Holder. Weldon Type 40MM Inside Diameter 90MM Outside Diameter MAS/BT 403 CAT 50 Taper, Shipping is set up to be 2-3 day delivery to the U.S. Shipping may be reduced by shipping USPS Parcel Post 2-9 delivery. We will ship worldwide If possible we will combine items to ship We will ship items same day payment is received if paid for by 2:00EST, We(United Precision Services& Magna Machine Company) are a new member of eBay but have over 60 years in the machining business. We have been selling& servicing CNC machines since 1999. Please e-mail any questions you may have or to inquire about other items we do not have listed yet. Thank you ... morePowered by The free listing tool. List your items fast and easy and manage your active items. On Oct-31-11 at 10:32:59 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Sellebrity Analytics.
Description BID WITH CONFIDENCE WITH OUR MONEY BACK GUARANTEE! Hansen Techni Level Transducer Probe for Ammonia Size 40" Cat. no 77-1000 We provided pictures to show the condition of this item. We believe that the item is in working condition if the necessary accessories are provided. Otherwise. We’ll be glad to issue a full refund less shipping and handling both ways. You will receive everything you see on the pictures. If it's not on the pictures. You will not receive it. SATISFACTION POLICY: It is my pleasure to serve my customers in the best manner possible and resolve any problem that may happen during the transaction. I ALWAYS WORK WITH MY CUSTOMERS TO RESOLVE ANY PROBLEMS. Please contact me through eBay messaging center. TERMS AND CONDITIONS: SOLD AS IS and UNABLE TO TEST. Please read complete description and look closely ... moreat photos. Please ask questions prior to bidding. All sales are final. The product is sold without warranties or guarantee. PAYMENT METHODS: We accept Pay Pal. Checks, certified checks. Checks must clear before the item’s shipping. North Carolina residents include 7.75% sales tax. RETURN POLICY: Returns are accepted within 30 days from receipt of the item if the item was grossly misrepresented or does not operate as intended. All returns must be verified via email within 14 days of receiving it. The item must be returned in the same condition as when it was received. No refund on shipping. Buyer pays returned shipping. This guarantee applies to U.S. shipping addresses within the lower 48 states only(All sales or shipments to other locations will be as-is and are final) We stand behind the products we sell. We ask you for 5 star ratings in each category. If for some reason you are not satisfied with your purchase or there is a problem. Please let us know before leaving a negative feedback. Thank you for looking and bidding! Please add me to your list of favorite sellers and come again.
Full perfs well-centred. Pristine fresh unmounted mint example with watermark inverted. CAT £40++
Concise Cat# M31(1) SG# 245) 1902 6d Pale dull purple MINT: Heavily Mounted. Spec ½40 View my. to your favourites. Powered by
This 1/4" endmill holder was damaged and the opening was ripped open to.290. Obviously. It will not be able to hold a 1/4" tool anymore, but with some patience and skill, it should be able to be opened up to anything over 5/16" It's not pretty, but it's cheap and it will work. Any questions, just ask. Also, check out my 0-6" calipers for sale.
Please read carefully before bidding You are bidding on. High Power Microwave Coaxial attenuator 40dB 200W MODEL: AAMCS-CAT-50-40-200-Nm-Nf Attenuation: 40dB power input: 200W DC-3GHz SEE: N TYP connectors See pictures Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please noted we are working 6 days a weak between: ... more5:00AM(GMT) 14:30(GMT) Sunday throw Friday. WE DON'T WORK IN THE WEEKEND! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive yo
1986 Issue. COMPLETE SET. MINT NEVER HINGED. VERY FINE. Scott(2013) value is $9.40.
HIGH CAT. VALUE SET. SEE IMAGES FOR PERFS. AND HINGING. I WILL COMBINE POSTAGE COSTS UP TO AN INVOICE TOTAL OF £60.
please see my other lots. Slowly breaking up a large collection all stamps as seen
1864/1883 Issue. USED. VERY FINE. Scott(2012) value is $46.60.
British Levant GV sg 50 10/ seahorse cat £40 As per scan- CHARITY- If you would like to make a small donation to our local charity. Look at our website: www.themelthorpestandrew.co.uk. Feel free to bid with confidence! We will give a full refund if you feel any lot selling for over £5 is not properly described. General description key: NHM = Unmounted full original gum MH = Some gum but hinge mark/s MNG = No gum at all Used/fu/vfu = Various quality of used stamps Unchecked = Genuinely unchecked for perf or watermark varieties, and catalogue values not totalled Cat. = Recent Stanley Gibbons catalogue values and numbers(note SG only give a single value for"mint" We try to check and disclose any faults which are not clear in the scans, particularly for small lots and single stamps. Larger lots will have been"weeded" ... morefor obvious faulty copies but stamps in such lots will only have been examined superficially so there may sometimes be a small number of stamps with overlooked faults- equally there may be more valuable perforation, watermark or postmark copies Payment in GB£ cheque please or, for non-uk buyers, paypal is recommended- it is quicker, saves outwards postage and saves us changing US$ at the bank. Small amounts are OK in mint GB decimal stamps. We are not allowed to advertise acceptance of payment in paper currency under ebays rules- if you would like to pay by any means OTHER than those listed above please email before bidding. Postage is charged roughly at cost, and we will try to use GB commems for outgoing mail if possible. We have recently streamlined the postage structure so there is a single flat cost for UK and non-UK Postage for s
Inventory Number: 07120330010 Manufacturer: Description: ERICKSON C-123397 TENSION COMPRESSION SAFE-DRIVE TAP HOLDER. CAT-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, ALL MOVING PARTS MOVE FREELY. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these
Fadal VMC CAT 40 coolant Through Retention Knobs Pull Studs 15 pieces Used 5/8-11 Thread Posted with 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13f6e3352f5-0xfb-
SG 55. 56, 57, 58, 59, 60 Any 4 lots sent together only a total of 99p postage dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f6e86cfd8-0xf8-
Mint. Never hinged. All stamps I sell on eBay are unconditionally guaranteed- return for a full refund plus shipping if you are not pleased. Looking for bargains to add to your collection? Check out my eBay store: New items are added each week. Also. Check out my I currently have up for auction. Be sure to add me to your! Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
amp;nbsp; Basutoland 1948 KGVI Royal Silver Wedding complete set mint never hinged. Tiny crease lower right on top value. Gibbons# 36-37. Scott# 39-40. Cat £48($77) Please click the shop symbol to view all our other British Commonwealth items.
To the best of my knowledge these 8 tool holders are all Cat-40 tool holders. 3 are end mill holders and 4 of them are for various milling cutters as shown in pics. The other one I'm not real sure what it is. Sorry but I'm not a machinist and can only describe what is here. These were bought at auction and are being listed how they were sold per box. Ask any questions u may have and ill give dimensions of tool holders if needed. These all appear to be used but in working condition. Thank u for looking. Posted with
Description British Levant SG L18 2d reddish orange. Fine used CAT £40
Compare These Iceland O20-O24 with All Others Offered on eBay! Attractive. Sound Stamps! APS#178998. Have a look at the rest of the stamps I'm offering at. Then visit my page for great values in United States Mint Stamps. Thank you!
Compare This Iceland 150 with All Others Offered on eBay! Certificate states: Iceland. Scott No. 150, unused, original gum, previously hinged(very lightly) genuine in all respects. Attractive Stamp! APS#178998. Have a look at the rest of the stamps I'm offering at. Then visit my page for great values in United States Mint Stamps. Thank you!
SWAZILAND THE 1889-90 1d& 2d FINE USED supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasicFree.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasicFree.swf.
ETM Cat 40 Taper 1 1/4" dia Shell/Face Mill Tool Holder 40 SM 1.250 E. ITEMS SOLD AS IS. WHERE IS stock# 3675 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
Terms& Conditions:  Please do not process payment until you receive an invoice from me with the right shipping charges.  Please read the Shipping& Handling charges below carefully for your protection& to avoid any misunderstanding. When you buy an item. You are agreeing to the shipping and handling charges and instructions stated below.  Unless informing us about any delay. Kindly arrange payment within a maximum of 5 days from the notification message. Items with delayed payment for more than 5 days will be re-listed and a final value fee will be requested from eBay. Shipping& Handling Charges& instructions: Buyers will be invoiced First Class Mail or Registered shipping as per the charges specified below. First Class Mail: $3.00. Registered Mail: $6.00. Multiple Items: NO additional fee. Note: Items worth more $50.00 ... morewill be mailed REGISTERED(NO EXCENTIONS) I will be providing Tracking number. Customers from: UAE. Bahrain, Qatar, Oman, Saudi Arabia, Yemen, Kuwait will pay only half the above rate. Please wait for my invoice. Payment Terms:  PayPal Money Bookers– if you want I can provide my email.  Other Payment methods: Please contact us. Guarantee& Promise of Authenticity: All items offered are genuine unless otherwise specified and every effort is made to ensure that. However. Should you ever and at any time after you have purchased an item from us discovered that it is not genuine, we will gladly accept it and issue full refund including all shipping charges. Return Policy: I try my level best to maintain an excellent feedback. Therefore I will always take the item(s) back for full refund including postage if the quality of the item is not as described or different from what was in the scan. Refund will be made after we receive the item in exactly the same condition shipped in. Cristian`s Corner: Please visit our store: http:stores.ebay.com/Cristian-s-Corner?rdc=1
This is a great old piece of the past. I didn't have a fishbowl. So I thought an old fashioned glass would do the trick.who knows if cats like manhattans.It is old, measures approximately 7 inches tall and I wish I knew the maker. I am happy to answer any questions you might have. Shipping on this item will be $10.00 Domestic Priority Mail and I thank you for your interest.
Mint. Complete booklet. All stamps I sell on eBay are unconditionally guaranteed- return for a full refund plus shipping if you are not pleased. Looking for bargains to add to your collection? Check out my eBay store: New items are added each week. Also. Check out my I currently have up for auction. Be sure to add me to your! Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
Valenite Cat 40 Taper 1 1/4" End Mill Tool Holder V40CT-E125. ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3678 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
Kennametal Cat 40 Taper Shell/Face Mill Tool Holder 4 1/2" long x 1 1/4" OD CV4SA125400 4311CL6 ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3676 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
RB4M-0001 RETENSION KNOB A: 0.59" B: 0.39" C: 1.38" Angle: 45. Thread Size: M16-2.0.
High Speed 12.000 CAT 40 3/8" x 2-1/2" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 12.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22915-2.5, CAT 40 x SLN 3/8"2-1/2" 3/8" 2.50" Three ... morereason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40
High Speed 12.000 CAT 40 3/8" x 1.75" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 12.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22915-1.75, CAT 40 x SLN 3/8"1.75" 3/8" 1.75" Three ... morereason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40
High Speed 10.000 CAT 40 1/4" x 2 1/2" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 10.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22911-2.5, CAT 40 x SLN 1/4" 2-1/2" 1/4" 2.5" Three ... morereason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40
High Speed 10.000 CAT 40 1/4"x4.72" RR End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 10.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Tapered design for increased rigidity Slim reach is ideal for machining in tight ares Technical Specification: Part No. Description ... mored1 l1 22909-4.72-RR, CAT 40 x SLN(RR) 3/16" 3/16" 4.72" Three reason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart&
High Speed 10.000 CAT 40 3/8"x4.72" RR End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 10.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Tapered design for increased rigidity Slim reach is ideal for machining in tight ares Technical Specification: Part No. Description ... mored1 l1 22915-4.72-RR, CAT 40 x SLN(RR) 3/8" 3/8" 4.72" Three reason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& t
High Speed 12.000 CAT 40 3/8" x 5" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 12.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22915-5, CAT 40 x SLN 3/8"5" 3/8" 5" Three reason to buy ... moreTECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40 collets, col
High Speed 12.000 CAT 40 3/4" x 1.75" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 12.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22925-1.75, CAT 40 x SLN 3/4"1.75" 3/4" 1.75" Three ... morereason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40
High Speed 10.000 CAT 40 1/4" x 1.75" End Mill Holder Shipping Info | Payment Methods& Information Description End Mill Holders I.D bore tolerance is H5(Best in industry) Balanced to 12.500 RPM to save spindle bearing life Taper ground to AT3 maximum spindle contact Lab certified for bore and taper tolerance Collet Chucks Balanced to 25.000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Rated the best End Mill Holders on the market. CAT 40 and CAT 50 are production balance to G6.3@ 10.000 RPM AT 3 taper or better ID hole tolerance = H5 to decrease TIR and reduct tooling cost. Best in industry! Technical Specification: Part No. Description d1 l1 22911-1.75, CAT 40 x SLN 1/4"1.75" 1/4" 1.75" Three ... morereason to buy TECHNIKS Tooling Increase Holding Power and Reduce T.I.R Improve Manufacuturing Quality and Productivity Extend Persishable Tool Life and Increase Profitability Techniks holds the tightest tolerance and provides the best value-to reduce your tooling costs. Only Techniks provides a report with each holder documenting the accuracy and balance. You'll appreciate that each holder comes with our innovative"Power Coat" nut that holds up to 75% tighter than other nuts! We are the most successful seller on eBay for C.N.C Machine Tooling& Accessories. We stock entire line of C.N.C Tooling such as CAT 40. CAT 50, BT 30, BT 40, BT 50, NMTB 30& NMTB 40 End Mill Holders, Collet Chucks, Shell Mill Holders, Tension/ Compression& Rigid Tap Holders, Stub Arbor Holders& Integrated Drill Chucks. We sell all the required accessories for most popular C.N.C Machine such as Hass. Fadal, Hurco etc. We sell ER, TG& DA collets& collet set at incredibly low price. We also, carry Retention Knob/ Pull studs, Wrenches for ER, TG& DA collet chucks, and Trolley cart& tightening fixture. In ER series we have ER-8. ER-16, ER-20, ER-25, ER-32& ER-40
For sale is a Lyndex/ Nikken C40-SF0375-3.15 CAT-40 x 3/8" 0.375" x 3.15" Extension Heat Shrink Tool Holder. $312.00 List Price. High Quality tool holder lightly used in an Aerospace manufacturing company. PLYN C40SF0375315-3 Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO SHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can be used at the buyer’s request. Although shipping charges ... morewill be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully packaged and shipped in the manner specified. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any issue that arises prior to leaving feedback. Thank you f
For sale is a Emuge/ Franken SK40-D8-G6.3/15 000 CAT-40 x 8mm(0.3150" x 3.00" Extension Heat Shrink Tool Holder. This is nice used adapter with part numbers faint, edp# 6480.08300 This is your chance to get nice used Emuge at prices below off brand holders. PEMU 648008C. Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO SHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can be used at the ... morebuyer’s request. Although shipping charges will be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully packaged and shipped in the manner specified. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any issue that aris
For sale is a Emuge/ Franken SK40-D6-G6.3 15 000 CAT-40 x 6mm(0.2362" x 2.25" Extension Heat Shrink Tool Holder. This is brand new in original tube with part numbers clear, edp# 6480.05500 This is your chance to get gently used Emuge at prices below off brand holders. PEMU 648005500B Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO SHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can ... morebe used at the buyer’s request. Although shipping charges will be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully packaged and shipped in the manner specified. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any is
For sale is a Lyndex/ Nikken C40-SF0500-3.15 CAT-40 x 1/2" 0.500" x 3.15" Extension Heat Shrink Tool Holder. $312.00 List Price. High Quality tool holder lightly used in an Aerospace manufacturing company. PLYN C40SF0500315-3 Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO SHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can be used at the buyer’s request. Although shipping charges ... morewill be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully packaged and shipped in the manner specified. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any issue that arises prior to leaving feedback. Thank you f
This has a bit of surface rust. But will clean up fine-if I remember right it came out of the one shop I bought a bunch of tooling from, and all the tooling that I bought was like this from sitting in the owners damp basement. Only selling since I have a surplus of these blocks and don't need this one! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f794f7b0b-0xfd-
EXCEL 810 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURE DATE 1994 TABLE SIZE 35.4" x 18.9" MAXIMUM TABLE LOAD 882 LBS SPINDLE NOSE TO TABLE TOP 5.5" 27.6" X AXIS TRAVEL 31.9" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 22" RAPID TRAVERSE RATE X& Y AXES 630 IPM RAPID TRAVERSE RATE Z AXIS 512 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 6000 RPM SPINDLE MOTOR 12 HP TOOL CHANGER CAPACITY 24 + 1 STATION ATC TOOL CHANGE TIME(TOOL TO TOOL) 2 SECONDS MAXIMUM TOOL WEIGHT 13 LBS WEIGHT. APPROX. 12.400 LBS DIMENSIONS. APPROX. 82"L x 94"W x 98"H EQUIPPED WITH: FANUC O-M CNC CONTROL WITH 9" CRT, RS-232C PORT INTERFACE FOR DNC OPERATION, SWING-ARM SIDE-MOUNT 24 + 1 STATION AUTO TOOL CHANGER, HELICAL INTERPOLATION. USER CUSTOM MACROS, COOLANT SYSTEM WITH TANK& PUMP, FULLY ENCLOSED GUARDING. ... moreWORK LAMP, ALL AVAILABLE MANUALS LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on
PAIR(2) Optimus XTS-10 Cat No 40-2078 Swivel Speakers BLACK EXCELLENT CONDITION: EXCELLENT- Optimus XTS-10 Speaker Pair SPEAKERS SWIVEL FOR MAXIMUM COVERAGE. IN ORIGINAL BOX. REALLY NICE SOUND.
Seth Thomas Cat 3671 Art Deco Alarm Clock-Works-GLASS BROKE 1930-40's Vintage. Attention Buyers: I do my best to accurately describe items listed for sale. Any chips. Cracks, tears, stains or other noticeable damage will be listed in the description. If no damages or defect s are listed above. It is because I didn't see any and the Item is in Very Good Condition. Please look carefully at the photos. As they are considered to be part of the description! Many of the items I list are from estate. Household, and yard sale clean outs and are priced low accordingly, but occasionally a flaw or defect may be overlooked or damage may occur during shipping. Some items may not have been tested to make sure they work properly. I try to note that in the description. Feel free to ask for more information prior to bidding, and I will answer to the ... morebest of my ability. If you are not 100% satisfied. Do not hesitate to contact me. I will do my best to resolve the problem, whether it requires a price adjustment, full refund or item replacement when possible. Items described as NEW may have been removed from packaging to display at a store or flea market. These items are free from any damage unless noted in description. Packaging may have minor damage. Missing. Badly damaged packaging, or repackaged items not in original boxes will be noted in description. Games. DVDs, CDs, Cassette tapes, records, etc. may not have been checked from beginning to end. Do not hesitate to notify me of any issues! Automobile parts are removed from vehicles that have been scrapped. And are tested prior to removal whenever possible. Shipping& Handling: The shipping cost is shown in the shipping sectio n of the listing. This is the shipping cost you are asked to pay. All prices are based on ACTUAL USPS rates and do not incl ude a handling charge. All prices are based on USPS first class or media mail when allowed. Parcel post for most other items. Sometimes, depending on your location, Priority mail is feasible at the amount paid, in which cas
FEDERAL PACIFIC CIRCUIT BREAKER 3 POLE 40 AMP 480 VOLT CAT#EHB3040 NC INDUSTRIAL SUPPLY. PLEASE CALL FOR EXPEDITED SHIPPING! WE ACCEPT CREDIT CARDS! WE SHIP OVERNIGHT UP UNTIL 3:30 PLEASE CONTACT US! WE OFFER COMBINED SHIPPING. 704)821-1104. Thank you for your interest in our products. You may view more products by visiting our eBay store at. Http:stores.ebay.com/NC-INDUSTRIAL Shipping Details. All shipping originates from 28110 zip code. We ship within 5 business days after payment is received. WE ONLY SHIP TO THE U.S.A. AND CANADA LOCAL PICKUPS ARE FREE OF SHIPPING CHARGES. FREIGHT SHIPMENTS. Large items that require an LTL shipment generally go out within 5 business day after payment is received.Seller must provide us with accurate shipping info on freight shipments. Information that we need is: Business Name. Shipping Address, Contact ... moreInformation, including phone number. Also, please inform us if the receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. Sales Policy: We consider your bid as a contract. Please only place a bid if you're serious about buying an item. If the item has not been paid for within 3 business days the item may be offered to the next highest bidder or re-listed.Payment is due within 3 days of purchase unless otherwise discussed between the buyer and the seller. Payment Details: We accept PayPal Payments or Cash for local pickups. We do not accept personal or business checks. Sign up for PayPal. It's the fast. Easy and secure way to pay online. Returns: We guarantee items to arrive as stated in auctions. IF YOU HAVE ANY QUESTIONS PLEASE ASK BEFORE BIDDING! Feedback: We like for our customers to be completely satisfied with their purchase. If your transaction is not to your satisfaction. Please contact us BEFORE leaving any feedback. Inform us of the issue and we will do our best to resolve the problem in order to receive positive feedback. Good communication ensures a successful transaction and resolution prior to advance posting of perma
Libya- Scott Catalogue# 766-768 Unused Fine Hinged. Catalogue Value $2.40. Complete set of 3 Stamps.
Libya- Scott Catalogue# 756-758 Unused Fine Hinged. Catalogue Value $2.40. Complete set of 3 Stamps.
TECHNIKS 5/8" END MILL HOLDER CAT 40 SHANK. Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, or credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. We gladly combine shipping on multiple items purchased! STOCK#A38 Thanks for looking!
PARLEC 1-1/4" END MILL HOLDER CAT 40 SHANK. Good used condition. Actual item pictured. Payment due within five days of purchase. Check. M/o, or credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased! STOCK#A71 Thanks for looking!
KENNAMETAL 7/8" END MILL HOLDER CAT 40 SHANK. 4" PROJECTION FROM FLANGE. Very good used condition. Actual items pictured. Payment due within five days of purchase. Check. M/o, or credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased! STOCK#A44 Thanks for looking!
COLLIS 3/4" END MILL HOLDER MADE IN U.S.A. CAT 40 SHANK. 3-3/4" PROJECTION FROM FLANGE. Very good used condition. Actual items pictured. Payment due within five days of purchase. Check. M/o, or credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased! STOCK#A32 Thanks for looking!
2) COLLIS TG100 COLLET CHUCKS MADE IN U.S.A. CAT 40 SHANK. 3" PROJECTION FROM FLANGE. Very good used condition. Actual items pictured. Payment due within five days of purchase. Check. M/o, or credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased! STOCK#A65/66 Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f7f9c7b13-0xf7-
NEWFOUNDLAND: s 36 + 39 + 40 USED. CAT. $50.50 As shown in the scan below. With no major faults. Free shipping in USA or $1.50 to other countries worldwide. Shipping discounts available on multiple purchases. Please check out my other CANADIAN PROVINCES currently on EBAY! 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f7fb5cd94-0xf5-
Collis Cat 40 Shell End Mill Holder 1.5" Dia. This is a used used Collis Cat 40 Shell End Mill Holder 1.5" Dia 2.4" projection. Please check my other auctions Payment to be received within 2 days of the close of auction Note: I only ship to a confirmed Paypal address Emails gladly answered. Please ask questions before bidding U.S. Shipping Only Packaged carefully. Domestic Shipping and handling is $12.00 to the continental USA 48 States and only to any physical address(not a PO Box) that is in the lower 48 states. There will be additional costs added to ship to Alaska. Hawaii. Thanks for looking
1949 Issue. SHORT SET. MINT NEVER HINGED. VERY FINE. Scott(2012) value is $5.35. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f802381b6-0xf5-
Fresh gum. No faults. PLEASE HAVE A GOOD LOOK THROUGH MY EBAY SHOP! THERE ARE LOTS OF GB AND COMMONWEALTH STAMPS TO SUIT ALL LEVELS OF STAMP COLLECTING. THANK-YOU. Powered by
For sale is a Iscar CAT40 SRKIN-0250-3.50 CAT-40 x 1/4" 0.250" x 3.50" Extension Heat Shrink Tool Holder. Edp# 432329 $318.00 List Price. Quality tool holder gently used in an Aerospace manufacturing company. PISC C40SF0250350-3 Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO SHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can be used at the buyer’s request. Although shipping charges ... morewill be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully packaged and shipped in the manner specified. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any issue that arises prior to leaving feedback. Thank yo
LYNDEX TAPPER TENSION COMPRESSION TAP DRIVER USES SIZE#1 BILZ TYPE ADAPTERS. CAT 4 0 SHANK. Used condition. Actual item pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $ 9.50 for USPS Priority Mail shipping with tracking. STOCK#B15 Thanks for looking!
Kennametal Cat-40 X TG-100 Collet Chuck. 500 Coll et& 4 X Mills Great Deal! The Cat-40 Holder is a Kennametal Brand. Holds TG-100 Collets. The Holder is very clean. In excellent condition. The Endmills are Regrinds. Also included is a.500 Collet. Wi th the holder and col let are 4X-Endmills& Spotter 1. 2X. 5 00 Shank Four-flute Finishing Solid Carbide. Regrinds. 2. 1x.5 0 0 Shank Spotter/Center Drill Solid Carbide 3. 1X. 50 0 Shank Four-flute rougher. Regrind. 4. 1X.500 Shank Three-flute rougher. This is a $500.00 Value. I'm starting the bidding@ $39.95
ERICKSON TENTHSET BORING HEAD MODEL NO.50. 1/2" BORING BAR HOLE. 1 DIV. =.0001" DIA. CAT 40 ADAPTER Used condition. As seen in pictures. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK#B23 Thanks for looking!
CARBOLOY 1-1/4" STUB ARBOR CAT 40 SHANK Used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#B5. Thanks for looking!
PARLEC DA180 COLLET CHUCK CAT 40 SHANK. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, or credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased! STOCK#B21 Thanks for looking!
JACOBS BALL BEARING SUPER CHUCK MODEL NO. 11N 0- 3/8" CAPACITY. MADE IN U.S.A. CAT 40 ADAPTER Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK#B20 Thanks for looking!
TAPMATIC SELF REVERSING TAPPING UNIT MADE IN U.S.A. MODEL NCR25 1/4" OR M7 CAPACITY. 3.000 MAX. RPM CAT 40 HOLDER Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. FREE USPS Priority Mail shipping with tracking* STOCK NO. A62 Thanks for looking!