In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
129.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Chino, United States
This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the ... moremilling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance.
$
147.58
Buy It Now
$300.00 Shipping
Condition: New
Location: Leipzig, Germany
Use one hand to hold the center transmission shaft. Set the bevel gear on axis screw with the other hand. Then check if the backlash between gears is ... morebetween 0.1-0.2mm. Tighten the handle to start setting socket parallel key and bevel gear.
$
51.03
Buy It Now
Free Shipping
Condition: New
Location: China
Milling Machine Part. Forward Reverse Switch for Step Pulley. Six Part Switch.
$
96.00
Buy It Now
$4.00 Shipping
Condition: New
Location: Chino, United States
NEW! RAM ADAPTOR OEM 2060129 TAIWANESE CASTING WILL FIT MOST ASIAN IMPORT MILLS AND THE AMERICAN MADE BRIDGEPORT SEE PICTURE OF BASE FOR GEAR HOLE PATTERNS ... moreAMERICAN MADE BRIDGEPORT: HAS(2) 1/4-20 HOLES AND(1) HOLE FOR ROLL PIN- EACH HOLE DESIGNATED BY STEEL STAMPED"B" ASIAN IMPORT MILLS: HAS(2) METRIC HOLES AND(1) HOLE FOR ROLL PIN- THESE HOLES HAVE NO DESIGNATION THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THE STORE. SUCH AS REPAIR KITS, REPLACEMENT PULLEYS AND CLOCK SPRINGS PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 40lbs Buyer pays the shipping& handling charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
38.95
Buy It Now
$6.90 Shipping
Condition: New
Location: Peoria, United States
LOWEST PRICE ON EBAY! This is a steel adapter. Not a flimzy aluminum tool, which allows you to replace the hand crank on your Bridgeport or import clone. ... moreLift that knee up and down by using a battery powered drill motor with a 1/2 inch chuck. This is a GREAT shoulder saver for us older machinists. This will fit all mills with a.625 shaft and a 9 cog interface. you can also use any 1" wrench as a lever source. Thanks for looking. This tool will work on Bridgeports. Comets, Enco, Supermax, Victor, Jet, Alliant, Acer, Sharp, Chevalier, and Webb with a 9 cog interface.
$
139.95
Buy It Now
Free Shipping
Condition: New
Location: United States
【High Efficiency Design】 Equipped with Gleason spiral bevel gear, the transmission ratio is stable during use, the transmission noise is small, the efficiency ... moreis high, and the load-bearing capacity is strong.
$
3950.00
Buy It Now
Condition: Used
Location: Orange, United States
PRESENTS FOR SALE AS-IS/FINAL SALE.
$
4250.00
Buy It Now
$350.00 Shipping
Condition: Used
Location: Bristol, United States
Head has been completely tuned up. This listing is for $4250 AND your old core Bridgeport head. It will be shipped on a pallet by truck via freight. Local ... morepickup is always welcomed, and we can load. Check out my other listings as well. Thank you for looking
$
3499.95
Buy It Now
Condition: Used
Location: Robards, United States
LOW HOURS ON THE REBUILT SPINDLE. CONNECT FOR FREIGHT QUOTE 700LBS.
$
15.17
Buy It Now
$10.89 Shipping
Condition: New
Location: Eastlake, United States
AMERICAN MADE BRIDGEPORT MILLING MACHINE QUILL SKIRT! BRAND NEW! OEM NUMBER IS 2190081 SHIPPING IS ONLY $3.99 COMBINE WITH OTHER PODUCTS FOR REDUCED SHIPPING ... moreON MULTIPLE ITEMS. THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THE STORE. SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email for further information. Shipping and Handling Shipping weight: 1lb. Buyer pays the shipping& handling charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
55.00
Buy It Now
$5.50 Shipping
Condition: New
Location: Trumbull, United States
Bridgeport Milling Head Repair, Inc. "The Bridgeport Experts".
$
250.00
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt, United States
used Tapmatic U3 reversible tapping attachment. Capacity 1/4-M7, max RPM 2000. comes with adaptor from MT1 to MT2 in working order. in decent condition ... moreThis pieces can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold.
$
452.00
Buy It Now
$15.00 Shipping
Condition: New
Location: Eastlake, United States
Fits Lagun FTV1 and FTV2 X-Axis. THE SERVO DYNAMO POWER FEED IS IMPORTED EXCLUSIVELY FOR SERVO PRODUCTS TO OUR EXACTING SPECIFICATIONS. If you are retrofitting ... morea Manual Mill to a Power Feed Mill . Full wave SCR/DC Motor (similar to the Servo Type 150 Power Feed).
$
422.39
Buy It Now
Free Shipping
Condition: New
Location: China
Modle:NT30. Spindle The sleeve assembly is suitable for ZX50 ZX7550 ZX7124 ZX6350 series drilling and milling machine milling head, there is good interchangeability! ... moreThe bearing clearance is large. Suit for most Turret and vertical milling machine.
$
31.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Parting out a Round Ram.M Head 9x32 table,100% USA Bridgeport.If you need a part off this model contact me and I will try and list it.A lot of the lower ... moreend parts will fit later models.
$
49.41
Buy It Now
Free Shipping
Condition: New
Location: United States
Milling Machine Parts R8 Spindle Assembly CNC Milling New Description: Suitable for most bridge and vertical milling machines Model: R8 Total length: ... more540mm After changing the main shaft, the working effect is restored more smoothly than before Installation steps: * Spindle dust cover first * Bearings are matched * Put on bearings and spacer rings * Put on another pair of bearings * Set of sun tablets *fasten the screw nut * Put on 6206 bearing and snap on the retaining ring Note: This installation step only provides the reference for the installer, and cannot be used as a basis for accuracy. If you need to achieve a certain accuracy, you need to ask a professional to install and debug. Packing list: 1 * Milling Shaft.
$
145.59
Buy It Now
Free Shipping
Condition: New
Location: Seattle, United States
1 x Power Feed Z-axis for Milling Machine. Max Torque: 450 in-lb. Rotate Speed: 0-200 RPM. 1 x Copper Gear & 1 x Flat Key Pin. Max Feed Rate: 650 mm/min. ... more1 x Connecting Rod & 1 x Flange. 2 x Limit Block.
$
199.99
Buy It Now
Condition: Used
Location: Watertown, United States
6"Bridgeport Mill Vise milling machine table vice 6"Bridgeport Mill Vise milling machine table vice SPECIFICATIONS: JAW LENGTH: 6” JAW HEIGHT: ... more2” JAW OPENING: 5” Country of Mfg: USA* Shipping Weight approx. 78 lbs. Shipping Envelope Size: 22" Long x 18" Wide x 12" High* Sold AS IS NO RETURNS FOB OUR WAREHOUSE Shipping Point: Robonex- 10090 Queens Way- Chagrin Falls- Ohio- 44023* PAYMENTS: PayPal(We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks electronically via PayPal too) If you make the payment through PayPal. We can ONLY ship to your PayPal confirmed address. No exceptions. Payment must be received within 5 days or a Non Paying Bidder Alert will be filed. FEEDBACK: Feedback is an integral part of eBay. Please leave feedback for us on eBay and we will do the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We will try our best to help you. Powered by
$
100.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
This is a high-quality C2 universal head suitable for most milling machines with J head milling machine RAM adapter M1187 milling machine parts. Material: ... morehigh quality metal Model: M1187 Bottom diameter: 190mm Height: 225cm Detailed other dimensions are shown in the figure Packing size: 30.5*33.5*26CM Gross weight: 13KG Net weight: 11kg.
$
22.50
Buy It Now
$8.50 Shipping
Condition: Used
Location: Greensboro, United States
Milling Machine Part - X Axis Aluminum End Cap Assy (right). Consists Of: 1 End Cap, 1 Bearing,1 Bearing Retainer 3 Screws.
$
9999.99
Buy It Now
Condition: Used
Location: Rochester, United States
For sale is a Bridgeport Series 1, 2 HP Vertical Milling Machine 3 Phase, 9 x 42" Table, Power Feed and Newall C70 DRO. It has been serviced and everything ... moreis in very good working condition. This mill is clean and has been very well maintained.
$
3.90
Buy It Now
$1.61 Shipping
Condition: New
Location: Harrison Township, United States
Bridgeport Milling Machine Brake Assembly Lever
$
10000.00
Buy It Now
Condition: Used
Location: Lenapah, United States
Bridgeport Series II Vertical Mill 3 Axis Acurite DRO. Milling capacity - mild steel. Milling feed rate - X & Y axis. Milling feed rate - Z axis. Milling ... morerapid feed rate - X & Y axis. Milling rapid feed rate - Z axis.
$
30.00
Buy It Now
$12.60 Shipping
Condition: New
Location: Broadview Heights, United States
OEM 2060076. 100 GRADUATIONS. >>>> SILVER IN COLOR
$
18.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Bristol, United States
used small taper collet tiny
$
155.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Theodosia, United States
Used aluminum motor mount/ pulley housing from a Bridgeport J head Mill. Good used condition, see all pics for details. Includes only what is in the pics. ... morePlease ask any questions before you buy. Thanks.
$
169.56
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Features: X-AXIS POWER FEED- Power Feed X-Axis, Voltage: 110V, 60Hz, Rotate Speed: 0-200 RPM, Max Torque: 450 in-lb DURABLE & LONG LASTING- Safe design ... morehelps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed .
$
8250.00
Buy It Now
Condition: Used
Location: Coffeyville, United States
BRIDGE PORT VERTICAL MILLING MACHINE. MILLING CAPACITY 2 IN 3/MINUTE (MILD STEEL). SERVO MOTOR PART NO. MODEL EZ-TRAK SERIES II. SERIAL NO. 99101522. ... moreTABLE TRAVEL (X-AXIS) W/OUT POWER FEED (END OF TABLE TO SADDLE 31 IN. ).
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Mill Machine Parts R8 Spindle + Bearings Assembly Fit BRIDGEPORT Milling US Product description: This product is a high quality R8 spindle + bearing for ... more3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Product specifications: Name: Milling R8 spindle + bearing Total length of the spindle: 545mm Head outer diameter: 46mm Spline outer diameter: 25mm D:25mm D1:20mm B:6mm Bearing position: 35mm and 30mm Packing size: 56*10*10cm Weight: 4.2kg Scope of application: Most milling machines (3#4# milling machine) The package includes: 1X R8 spindle + bearing.
$
49.40
Buy It Now
Free Shipping
Condition: New
Location: United States
Milling Machine Parts R8 Spindle Assembly CNC Milling New Description: Suitable for most bridge and vertical milling machines Model: R8 Total length: ... more540mm After changing the main shaft, the working effect is restored more smoothly than before Installation steps: * Spindle dust cover first * Bearings are matched * Put on bearings and spacer rings * Put on another pair of bearings * Set of sun tablets *fasten the screw nut * Put on 6206 bearing and snap on the retaining ring Note: This installation step only provides the reference for the installer, and cannot be used as a basis for accuracy. If you need to achieve a certain accuracy, you need to ask a professional to install and debug. Packing list: 1 * Milling Shaft.
$
109.99
Buy It Now
$25.25 Shipping
Condition: Used
Location: Lenoir, United States
This Bridgeport table yoke is a genuine OEM part that has been previously used. It has no cracks or repairs and is in good working condition. The yoke ... moreis designed for the X and Y axis and is hard to find, making it a highly sought-after item for any CNC, metalworking, or manufacturing enthusiast. The brand of this yoke is Bridgeport, a well-known and trusted name in the industry. This item is perfect for those in need of replacement or spare parts for their machining centers and milling machines.
$
4950.00
Buy It Now
Condition: Used
Location: Orange, United States
$
33.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
This Is a High Quality R8 Mill Pull Rod 7/16 Vertical Mill Shank 600mm, Durable And Perfect For Most Milling Machines. 1Xr8 Milling Machine Pull Rod. ... moreGross Weight: 0.8kg. Material: Iron. Machine TypeR8 Draw Bar.
$
0.01
6d 21h 29m 21s
0 bids
$97.99 Shipping
Condition: New
Location: China
Suitable for 2#, 3#, 4#, universal Taiwan milling machine. 5# and 6# milling machines cannot be used. Model:A3+20+57+74. Color :Silver.
$
29.95
1d 22h 28m 32s
0 bids
$8.00 Shipping
Condition: Used
Location: Easthampton, United States
Bridgeport Milling Machine Ball Crank Handle for X,Y Travel, with 5/8" Hole and 1/8" Keyway, as shown in my photos.There is no BIN or Reserve on this ... moreitem and I do not end my auctions early.S & H is 8.00.Payment is expected within 3 days after sale. Please do not bid on this item if you do not have a U.S. shipping address.Thank you for looking at my sale!.
$
27.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Color: silver Packing size: 26*5*4cm Package weight: 0.97kg Product material: high quality alloy Milling machine lifting crank specifications: ... more9 teeth Inner diameter: 27.5mm Inner hole: 16mm Outer diameter: 39.5mm Product features: flexible, durable, smooth and smooth, zinc alloy is tougher, flexible and easy to use, smooth and smooth, not stable. It has good mechanical properties at room temperature and high wear resistance. The package includes: 1X milling machine lifting crank.
$
31.36
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Product Description: This is a high-quality milling machine parts suitable for most milling machines, 25mm clock spring + steel shell, can be a good replacement ... morefor your broken parts. Features: Spring height: 25mm The inner diameter of spring seat: 45mm Thickness: 0.7 mm Material: high-quality metal Model: B177 + B178 The package includes: 1pcs / Set (B177 + B178) Note: If there are pins in the housing, the clock spring cannot be installed. Please note that spring bounce may cause damage. It is best if the spring is pressed into the housing.
$
31.35
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Product Description: This Is a High Quality R8 Mill Pull Rod 7/16 Vertical Mill Shank 600mm, Durable And Perfect For Most Milling Machines. Features: ... moreMaterial: Iron Size: 7/16 Packing Size: 2.5*2.5*60cm Gross Weight: 0.8kg Net Weight: 0.5kg The Package Includes: 1Xr8 Milling Machine Pull Rod NOTE: Our product does not come with M12 heads. Please carefully check before purchasing.
$
49.41
Buy It Now
Free Shipping
Condition: New
Location: United States
NOTES :this product doesn't come with bearings Description: Suitable for most bridge and vertical milling machines Model: R8 Total length: 540mm After ... morechanging the main shaft, the working effect is restored more smoothly than before Installation steps: * Spindle dust cover first * Bearings are matched * Put on bearings and spacer rings * Put on another pair of bearings * Set of sun tablets *fasten the screw nut * Put on 6206 bearing and snap on the retaining ring Note: This installation step only provides the reference for the installer, and cannot be used as a basis for accuracy. If you need to achieve a certain accuracy, you need to ask a professional to install and debug. Packing list: 1 * Milling Shaft.
$
125.90
Buy It Now
Free Shipping
Condition: New
Location: Buford, United States
The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The machine is used for X axis,if you want to used for Y ... moreaxis,a SUPPORT PLATE will be needed. X-axis power feed for Bridgeport type milling machines.
$
899.95
Buy It Now
$157.34 Shipping
Condition: New
Location: Ontario, United States
Milling Machine Accessory- Horizontal Milling Attachment NT40 w/ Support&Arbor Horizontal Milling Attachment with Arbor- NT40 Fits Bridgeport-style ... moremilling machines with a 4" 100~105mm) quill diameter and NT40 spindle taper Converts a vertical mill into a horizontal mill Note: Maximum allowed speed with right angle attachment is 2000 rpm. The dovetail angle on milling arbor support is 50°. Complete Set Includes: horizontal milling attachment. Arbor support. Milling arbor If you have any questions regarding this item. Please let us know we'll be happy to help. PN: G103-NT40_gsrx_vers_566(GS 6.7.1(566)
$
125.90
Buy It Now
Free Shipping
Condition: New
Location: Westbury, United States
Better Values Friendly Service Fast Shipping BRAND NEW Power Feed Y Axis Unit overall dimension: 5'L x 8/38'W x 11-1/4'H Type: Y-Axis Reversible ... morewith 1.5 second time delay Variable speed Rapid traverse speed: 40"Min Feed range: 0-10"Min 115V/60Hz/ 1 Phase power supply Torque: 150LBS Quantity: 1 Set Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
22.00
Buy It Now
$5.50 Shipping
Condition: New
Location: Trumbull, United States
Bridgeport Milling Head Repair, Inc. "The Bridgeport Experts".
$
599.00
Buy It Now
$23.74 Shipping
Condition: Used
Location: Louisville, United States
YOU ARE BIDDING ON ONE USED BRIDGEPORT MILL QUILL MASTER- TYPE JA- GOOD WORKING ORDER! Bid now because there is NO RESERVE and there is $15.00 SHIPPING ... morewithin the US. So you can save! Winning bidder must respond within 24 hours and send payments in accordance to all eBay rules and regulations. WE ACCEPT PAYPAL! Thanks and happy bidding. HAWAII- ALASKA- PUERTO RICO- PLEASE EMAIL FOR QUOT.
$
63.00
Buy It Now
$19.59 Shipping
Condition: New
Location: Milford, United States
And re-manufactured parts for Bridgeport Knee Type Milling Machines. Bridgeport PN 1218-0094. Alternative PN 218-0094, 2180094, HQ 1468, 2J-601. Discrepancies ... morewill be listed if present. BptParts has a selection of complete machines, machine accessories.
$
89.99
Buy It Now
$9.70 Shipping
Condition: New
Location: Broadview Heights, United States
HANDWHEELOEM 2182001 M1476. NEW SPEED CHANGE HANDWHEEL. THIS IS ON THE J HEAD VARIABLE SPEED MILLING MACHINES. SET SCREWOEM 1181233 M1479.
$
42.50
Buy It Now
$9.00 Shipping
Condition: New
Location: Campbell, United States
And not by High Quality tools, Bridgeport, Hardinge. 118 2106 BEFORE THEY SOLD BRIDGEPORT TO INCOMPASS. ONE NEW (1) BELTS FOR THE 1.5HP & STEP PULLEY ... moreMILL. TIMING BELT 1 1/8" WIDE WITH42 TEETHOEM 11182106.
$
4000.00
20h 7m 10s
1 bids
$600.00 Shipping
Condition: Used
Location: Elkhorn, United States
220 / 440 volts, 3 phase, 60 cycle. Work Light. Quill travel 5". Equipped With 2,750 lbs. Cross travel 13".
$
44.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Bristol, United States
Up for sale is a" BRIDGEPORT MILLING MACHINE Spring Loaded QUILL HANDLE- A" in as found but good working condition. Has a 1" diameter center ... morehole, not sure of the maker as it is unmarked, clean useful used tool!as shown in picture below) NOTE: once the item is paid/ shipped, all of the LABEL/ TRACKING information will always be under PURCHASES your my eBay with the item you purchased also eBay will send a message to your email address stating your item is shipped. Please take a minute to look at our other items! NO INTERNATIONAL SHIPMENTS! NO PICKUPS OR DELIVERIES! We also sell used tools, some may need recalibrating, some may or may not have etchings, repainting on them from the previous owners, if something isn't in our description or pictured, you can assume it is not included! Method of payments: PAYPAL. Massachusetts residents pay 6.250% sales tax. Good Luck& Happy Buying! Powered by The free listing tool. List your items fast and easy and manage your active items.
$
29.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
For Bridgeport Type Milling Machines Or Any Others With A R8 Spindle. Ground Shank And Hole, Heat Treated For Double Accuracy. Draw bar Thread Precision ... moreGround Concentric. Hardened And Ground For Durabilty And Superior Performance.
$
19.99
Buy It Now
Free Shipping
Condition: Used
Location: Garden Grove, United States
$
39.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Bristol, United States
43 Pcs. Techniks Brand New 1/8" to 3/4" x 64ths TG 75 Precision Collet Set. Techniks collets are Precision ground& hand inspected for close ... moretolerance gurentee TG Collets Features 0.0004" T.I.R Precision swiss ground& hand inspected Clamping range: 1/64" Techniks TG collets are made from high-carbon bearing steel that is heat-treated for imporved flexibility and longer life. Eacg collet is precisely ground and individually inspected and tested for quality. Techniks ER. TG& DA Collets are absolutely the best in industry. We are a full-line Techniks distributor. Please feel to contact us for any questions you may have. Collet Series L A Max d TG 75, 1.844" 1.062" 0.750" We are offering Bison-Toolmex. HPI-Pioneer, Lyndex-Nikken& Techniks CAT 40, CAT 50, BT 30, BT 40, BT 50, NMTB 30, NMTB 40, NMTB 50& HSK 63A CNC Tooling Kits. Please e-mail me at sales@cecs.us or call me@ 401-490-1141 to quote for your customize tooling kit. Standard CNC Tooling- CAT/BT/HSK/NMTB Balanced 15K RPM@ G6.3 CNC Tooling- CAT/BT Balanced 20K RPM@ G2.5 CNC Tooling- CAT/BT DA. ER& TG Collets Haas. Fadal Pull Studs/Retention Knobs Balanced 20K RPM@ G6.3 CNC Tooling- CAT/BT/HSK Balanced 20K RPM@ G2.5 CNC Tooling- CAT/BT DA. ER& TG Collets Pull Studs/Retention Knobs Standard CNC Tooling- CAT/BT/HSK/NMTB HSBalanced 20K RPM@ G2.5 CNC Tooling- CAT/BT SK/LSK. MMC,VC,Bulleyes& 3 Lock Holders DA. ER& TG Collets Pull Studs/Retention Knobs Balanced 18K RPM CNC Tooling- CAT Balanced 25K RPM@ G2.5 CNC Tooling- CAT/BT/ISO DA. ER& TG Collets Pull Studs/Retention Knobs 10 Reason to bid or buy my listing or products from eBay We do accept world the most secure& reliable payment method“PayPal” Listings are described with detail information. Every listing or items have digital images from every angle from buyer’s perspective. You will get what we are advertising on eBay no substitute or alternative products. We are not listing anything on eBay. Which we do not have in stock so; you wil
$
47.99
Buy It Now
$22.80 Shipping
Condition: New
Location: Broadview Heights, United States
OEM 2183921. DO NOT PUT THE LARGE SPACER BACK ON THE DRAWBAR ONCE DRAWBAR IS CUT. TWO LIFE DRAWBAR 1027. 19 1/4" DRAWBAR LENGTH. NEED MORE PARTS FOR YOUR ... moreBRIDGEPORT SERIES 1?. R8 7/16-20 THREAD -OVERALL LENGTH 26 1/2".
$
1799.99
Buy It Now
Condition: Used
Location: Broadview Heights, United States
42" TABLE (OEM 12060346) WITH SADDLE (OEM 12060097). VERY GOOD CONDITION - TABLE HAS TWO OR THREE SHALLOW END MILL MARKS - EASY TO REPAIR. OBVIOUSLY NEEDS ... moreCLEANING. SEE PICTURES.
$
52.35
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
(Milling Boring Head. High precision milling machine boring head. 5)38MM BORING HEAD WITH R8 ARBOR. 38MM BORING HEAD. 2) 38MM BORING HEAD WITH MT1 ARBOR. ... more3)38MM BORING HEAD WITH MT2 ARBOR. 4) 38MM BORING HEAD WITH MT3 ARBOR.
$
39.99
Buy It Now
$24.50 Shipping
Condition: New
Location: Broadview Heights, United States
EXCELLENT QUALITY DRAWBARS FOR YOUR VARIABLE SPEED BRIDGEPORT MILLING MACHINE. TWO (2)SINGLELIFE DRAWBARS. R8 7/16-20 THREAD. BOTTOM OF WASHER TO END ... moreOF THREAD 18 1/4". THREAD 1 5/8" LONG.
$
249.00
Buy It Now
$40.78 Shipping
Condition: Used
Location: Louisville, United States
Outboard Horizontal Milling Support for Bridgeport - Outboard Horizontal Milling Support for Bridgeport. The Tooling Emporium is located in downtown Louisville ... moreKY. We have a very large inventory of tooling.
$
50.00
Buy It Now
$8.42 Shipping
Condition: Used
Location: Broadview, United States
BRIDGEPORT MILL, J HEAD milling machine SPEED CHANGE HANDWHEEL 1476.Feel free to ask any questions, and check out our store for more parts.
$
100.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
This is a high-quality C2 universal head suitable for most milling machines with J head milling machine RAM adapter M1187 milling machine parts. Material: ... morehigh quality metal Model: M1187 Bottom diameter: 190mm Height: 225cm Detailed other dimensions are shown in the figure Packing size: 30.5*33.5*26CM Gross weight: 13KG Net weight: 11kg.
$
100.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Top Quality Bridge Port Type Mill Part, J Head Milling Machine Ram Adapter M1187. This Is a High-quality C2 Universal Head Suitable for Most Milling Machines ... morewith J Head Milling Machine Ram Adapter M1187 Milling Machine Parts.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
 In 

Former Listings  
 
Bridgeport 2J mill head with CNC Quill assy
BRIDGEPORT 2J MILLING HEAD This head is from a Bridgeport DX32 CNC package. Machine type is V2XT/Explorer I. Motor is 2hp. 3ph power. I am selling this head for my employer. We are selling it because the CNC programmer was out of date so we decided to convert this mill to a manual machine. The head itself is in excellent condition. It was used very little in a manufacturing support tool room. This machine was NOT in a production tool shop. The head has a collet system installed. The collet adapter and the entire set of collets are included. If you choose to buy this we will construct improved packaging prior to delivery. It will be shippped on a 40" x 48" or similar sized pallet and will be properly secured and wrapped. It will be shipped via freight truck- approximate weight is 550 lbs including packaging. Will ship to USA only.
BRIDGEPORT MILLING MACHINE PARTS TABLE /BASE PARTS SERIES 1
ORIGINAL BRIDGEPORT PARTS WE HAVE TONS OF THESE PARTS
TRUE-TRACE MAN-AU-TRACE 360/3D HYDRAULIC COPIER FOR BRIDGEPORT MILL
Description TRUE-TRACE MAN-AU-TRACE 360/3D HYDRAULIC COPIER FOR BRIDGEPORT MILL GOOD WORKING CONDITION Payment PAYMENT MUST BE MADE WITHIN 7 DAYS OF PURCHASE Terms of Sale International Buyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us We are committed to 5-star service! Our goal is to exceed your expectations! If you feel that you have not received 5 star service. Please contact us a vmash@optonline.net before leaving feedback and we will work with you to ensure satisfaction. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e8777d906-0xf9-
CLEAN! 1991' BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE - NICELY EQUIPPED
aims CLEAN! 1991' BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE- NICELY EQUIPPED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. If the player doesn't work: Made by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is an EZ-TRAK 2-Axis CNC Milling Machine in EXCELLENT condition. Model# EZ-TRAK Serial# BR258369 Date of Manufacture: 1991 Here is some information from Bridgeport: This is the EZ-TRAK CNC Milling Machine. Combine the Series I with an ... moreeasy-to-use control. And you have the EZ TRAK CNC. With the EZ TRAK, operators can alternate between manual and automatic milling as their application demands. Its three-axis control has a fully adjustable, flat screen Monitor that prompts for all machining data and signals the operator when an action is required. The control can store up to 1.000 operations. The EZ TRAK also features a powerful 2 HP spindle motor, large table travel, and automatic cutter compensation so you can use those reground milling cutters. Chrome-plated ways with covers and a centralized, one shot lubrication system ensure a long machine life. Features: Rigid. One-Piece Column and Base Integrally Cast with Added Ribs. Hard Chrome-Plated Quill. Proven resale value! High demand caused many used Series I standards to sell for more than their original purchase price. Versatile-totally interchangeable parts. You choice of a full line of high productivity accessories and heads. Full support. Bridgeport stands behind every machine with nationwide parts and service. And application engineering support. Patented flow-through air cooling on 2J head prolongs bearing life and prevents expansion caused by heat build-u
Milling tool bit and Tapered Shank holder with 5/8 Collet Cincinnati Bridgeport
Taper shank attachment vertical mill holder tapers 1 1/4 inches to 1 1/2 in 7 inches with screw thread draw up. And 5/8 inch collet with a 5/8 inch fly cut mill bit. Light flaws but only needs light grind to produce new cutting results. Shaft is straight and ready for use. Removed from a working Cincinnati#3 vertical milling machine.
WWII dog tags chain with original bag 1944, The Bead Chain MFG Co. Bridgeport CN
WWII dog tags chain with original bag 1944. The Bead Chain MFG Co. Bridgeport CN. ARTIFACT: WWII dog tags chain with extension and with original illustrated bag. Manufactured by The Bead Chain MFG Co. in Bridgeport, CN. VINTAGE: Circa 1944 SIZE: Approximately 24" and 4" CONSTRUCTION/MATERIALS: stainless steel MARKINGS: None. ITEM NOTES: CONDITION: 9 Excellent- near mint. NOTE: See our other auctions for other vintage memorabilia. SHIPPING TERMS: Winning bidder pays shipping cost of postage. Insurance is included in the price of shipping for items shipped within the US. Our items will ship on either Tuesday or Friday depending on when payment is received. NON-U.S. BIDDERS: Check with me about shipping costs to help you you’re your final decisions about bidding. Overseas shipping will also be priced higher. INTERNATIONAL sales shipped ... morewith limited liability depending on the country being shipped to) GUARANTEE: As with all my items. This piece is guaranteed original. Good luck! Inkfrog terapeak. I000000. InkFrog Analytics.
WW II WAR DEPARTMENT COVER RPO Camp McCoy exchange BRIDGEPORT CT McKesson Robbin
Get Your Free eBay Template Designs at WildTips.com Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e8a90d768-0xfc-
Bridgeport, Kearny, Deckel Hand shaping attachment
Super well made hand shaping head attachment. Look at pictures closely. Feel free to contact me with any questions. Paypal only.Sold as is buyer pays actual shipping Posted with
Bridgeport knee crank handle and downfeed handwheel
Shortened and welded bridgeport knee crank. Also a plastic downfeed handle. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e8b19f07b-0x100-
Albrecht Keyless 0- 1/4" Chuck Lathe Milling Southbend Bridgeport German Made
Albrecht Keyless 0- 1/4" Chuck Lathe Milling Southbend Bridgeport German Made This chuck has a straight adapter installed on it. But the chuck is Jacobs Taper(J1) so it can be mated to any adapter with that taper if desired. This item has an engraved name on the polished part by the chuck grippers. Just slightly visible in the 1st photo. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. gsrx_vers_486(GS ... more6.5.1(486)
BRIDGEPORT MILLING MACHINE, BRACKET FOR DIGITAL READOUT
Bridgeport milling machine. Bracket for digital readout unit Will post world wide Recycled packaging always used if possible After receiving payment i will post A.S.A.P. work permitting
BRIDGEPORT QUILLMASTER QRA small right angle head attachment No Reserve
BRIDGEPORT QUILLMASTER QRA small right angle head attachment No Reserve QRA Bridgeport Head This head is in good working order. And the heads turns smooth, item is original paint. if you have any questions please email Posted with ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e8d19e1fa-0xff-
BRIDGEPORT MILLING MACHINE SPINDLE QUILL WITH BEARINGS
NICE SHAPE WITH BEARINGS
1 HP Bridgeport MILLING MACHINE SPINDLE HUB & PULLY WITH GOOD BEARINGS
NICE SHAPE ORIGINAL BRIDGEPORT PARTS GOOD BEARINGS FOR 1 HP SERIES 1 J HEAD
6" Bridgeport VISE WITH SWIVLE BASE
NICE SHAPE LIST PRICE WAS 650 FROM BRIDGEPORT BACK IN THE 80s
Cincinnati Milling Machine Co. cutters shaper tools Bridgeport 8 tools & holder
Cincinnati Milling Machine Co. various tool bits 8 pieces various size cutter with 5/8" shank with wooden holder stand(Same as Bridgeport shaper tools) Used Buyer pays shipping Accept Paypal or MO On Apr-14-13 at 12:17:43 PDT. Seller added the following information: Very similar to Bridgeport& other shaper cutters
G99775 Lot (9 pcs.) Various R8 Collets for Bridgeport Mill
G99775 Lot(9 pcs. Various R8 Collets for Bridgeport Mill(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G99775 This lot of Nine(9 pcs. Various R8 Collets. For Bridgeport type Mill, appears to be in good cosmetic condition, although there are a few dings, scratches, signs of previous use. Please see the photographs. The lot includes one 1/8” two 3/16” one ¼” two 5/16” one 7/16” one ½” and one ¾” collets. Some of the collets are Bridgeport brand and some are unknown brands. Items come exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test these items so they are being sold as is. The unpacked dimensions of this lot are 7“inches x 5“inches x 7“inches. Please ask ... morequestions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $16.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 6.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that a
1970's VINTAGE MILLING SPEED & FEED CALCULATORS 1977 BRIDGEPORT, 1970 McD. Doug.
I have 2 Vintage 1970's Milling Speed and feed Calculators. 1. McDonnell Douglas Corporation Copyright 1970. 2. Bridgeport Textron Copyright 1977.
MOOSE LODGE #622 BRIDGEPORT ILLINOIS THUR TOKEN
AS SHOWN MOOSE LODGE#622 LOCATED IN BRIDGEPORT ILLINOIS.REVERSE.THUR. WINNER TO PAY $1.50 S&H. GOOD LUCK AND THANKS FOR CHECKING MY AUCTIONS.
BRIDGEPORT MILLING MACHINE HEAD ADJUSTING SCREW
BRIDGEPORT MFG LEFTR TO RIGHT ADJUSTING ON THE HEAD
R8 COLLET 3/16" ROUND FOR A BRIDGEPORT MILLING MACHINE #6262
DESCRIPTION R8 COLLET 3/16" ROUND FOR A BRIDGEPORT MILLING MACHINE WEIGHT IS APPROX. 10 oz THIS ITEM IS USED BUT APPEARS TO BE IN GREAT SHAPE Please browse our store and other listings for more cutters. We offer combined shipping. If you have any questions feel free send me a message.New items arriving daily so if you dont see what you want please check back. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. ... moreProducts are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. So; Please Do Not Ask! 4: Refunds will be on a case by case situation and we must receive the item back before we refund You. If the item is damaged due to shipping; You must notify and supply a photo of damaged item to me within 24 hours of receiving the item. Most of the time; We can't issue an exchange product as there isn't one to replace it. Shipping fees are non-refundable! 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. 8: All items over $100.00 in declared value will be shipped with insurance that will be figured at the time of invoice. 9: Concerning Calibration; Items are not tested or calibrated unless otherwise stated PAYMENT TERMS PayPal L
Tree Mill Journeyman 310 Bridgeport Type
Tree Mill Journeyman 310 Model: Journeyman 310 Serial: 9-32-85-1163 Volts: 230 Hz: 60 Phase: 3 Full Load Current: 10 Amps Largest Motor: 6.8 Amps Machine is in working condition. Contact me with any questions or additional pictures. Payment is required within 48 hours of making purchase. Thank you.
18 WWII Letters Merchant Marine SS Winfred L. Smith V-Mail Form Bridgeport WW2 2
An original lot of around 18 World War Two letters that belonged to Merchant Marine John Spencer. These were letters written to him. These were written on V-mail envelope forms. The envelopes have the return address of Bridgeport. Connecticut and the send to address of the SS Winfred L. Smith. The letters are dated/postmarked 1944. Overall the letters are in very good condition. Some have some wear and tear marks. If you have any questions feel free to ask. Thank you for looking. Please note I list new items every week. TERMS AND CONDITIONS Winning bid will pay $4.00 for shipping and handling. Shipping discounts available for multiple items won. For orders shipped in America take 50% off the regular shipping charge for each additional item won. Please note: The highest shipping and handling charge will be charged the full amount first. If ... moreyou would like me to hold any items won to combine shipping with a future auction let me know and I will accommodate. I accept PayPal. Will ship to any location world wide. All shipping and handling rates to locations outside the United States are twice the listed amount in the item description. Buyers are responsible, for all customs, and international taxes, etc. Powered by The free listing tool. List your items fast and easy and manage your active items.
11 WWII Letters Merchant Marine SS Winfred L. Smith Bridgeport Connecticut WW2 2
An original lot of around 11 World War Two letters including the envelopes that belonged to Merchant Marine John Spencer. These were letters written to him. The envelopes have the return address of Bridgeport. Connecticut and the send to address of the SS Frederick W. Taylor or SS Winfred L. Smith. The letters are dated/postmarked 1942 to 1943. Overall the letters are in very good condition. Some have some wear, some envelopes have wear. If you have any questions feel free to ask. Thank you for looking. Please note I list new items every week. TERMS AND CONDITIONS Winning bid will pay $4.00 for shipping and handling. Shipping discounts available for multiple items won. For orders shipped in America take 50% off the regular shipping charge for each additional item won. Please note: The highest shipping and handling charge will be charged the ... morefull amount first. If you would like me to hold any items won to combine shipping with a future auction let me know and I will accommodate. I accept PayPal. Will ship to any location world wide. All shipping and handling rates to locations outside the United States are twice the listed amount in the item description. Buyers are responsible, for all customs, and international taxes, etc. Powered by The free listing tool. List your items fast and easy and manage your active items. On May-10-13 at 13:08:01 PDT. Seller added the following information: JUST A NOTE: THESE LETTERS ARE NOT DATED/POSTMARKED 1942 TO 1943. THEY ARE FROM 1944 TO 1945.
WWII SCRAP THE AXIS HITLER TOJO MUSSOLINI FULL PAGE POSTER SIZE AD BRIDGEPORT CT
ORIGINAL. NOT A COPY NOR A REPRINT; WWII POSTER SIZE FULL PAGE NEWSPAPER AD"SCRAP THE AXIS WITH SCRAP" SHOWS IRON, KEYS, WRENCH, TEA POT, ETC. SCRAP FALLING ON HITLER, MUSSOLINI, TOJO AND RATS; 16" X 20" FROM THE BRIDGEPROT POST, CT. VERY GOOD CONDITION-SEE PHOTOS. CHECK OUT MY OTHER EARLY ADS, HISTORIC AND SPORT ITEMS.
BRIDGEPORT MILLING MACHINE FINE FEED QUILL WHEEL
6" DIA ORIGINAL BRIDGEPORT PART
X AXIS HANDLE BEARING CAP FOR BRIDGEPORT TYPE MILLING MACHINE
This is an x axis handle bearing cap for a manual Bridgeport type knee mill. We installed a retrofit kit on this machine.
BRIDGEPORT MILL "J HEAD” 9" x 48" VERTICAL MILLING
THIS MACHINE HAS BEEN SITTING FOR 3 YEARS AND I HAVE NO USE FOR IT ANYMORE WE PAID 3.000.00 AND USED IT FOR A FEW MONTH AND NEVER USED IT AGAIN SO HERE IS YOU CHANCE FOR A GOOD DEAL, THE INFORMATION DESCRIBED HERE IS THE SPECS I FOUND OUT IN THE INTERNET AND ALSO LISTED ON EBAY AS WELL THE SAME MACHINE SO PLEASE LOOK AT THE PICTURES AND BE SURE OF WHAT YOU ARE BUYING IS WHAT YOU WANT SINCE MY KNOWLEGE IS LIMITED ABOUT THEM- I CAN HELP WITH ANY QUESTIONS YOU MIGHT HAVE AND I CAN HELP WITH SHIPPING IF NEEDED. BRIDGEPORT"J HEAD” 9" x 48" VERTICAL MILLING MACHINE SPECIFICATIONS: TABLE: 9" x 48" X-AXIS TRAVEL: 32" Y-AXIS TRAVEL: 12" KNEE TRAVEL: 16" VERTICAL CAPACITY: 0- 18 1.2” THROAT: 6 3/4” 18 3/4” SPINDLE SPEEDS: 8) 80- 2.720 RPM POWER DOWN FEED: 3) 0016. 003, 006/ REV. DRILLING CAPACITY: MANUAL: 3/4” ... morePOWER: 3/8” SPINDLE TAPER: R-8 MOTOR: 1 HP. 3 PHASE, 220/440 V DIMENSIONS: 63" x 76" x 76" H SHIPPING WEIGHT: 2.000 LBS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e919d9453-0xfb-
Bridgeport #1 boreing head
This bridgeport boring head#1 is used but is in good condition.It comes with the box and 4 boreing bars. Please no returns. And shipping to U.S.A.only. Thanks for looking
SET of #1 thru #4 BRIDGEPORT INDEX PLATES
Here is a set of 4 original US made Bridgeport Index Plates#1thru4. In perfect condition these are 5-1/2" dia. with a 1-1/8" center bore. Clean plates with no damage. Shipping flat-rate to the lower 48 is $7 all others must contact seller for actual cost.
ETM R8 0.375" CAPACITY TOOL HOLDER FOR BRIDGEPORT MILL
Engineering Surplus Supplies& Used Equipment Auction Terms Shipping Policy Return Policy Visit Store Join Newsletter Description ETM R8 TOOL HOLDER FITS BRIDGEPORT MILL AND OTHER R8 MACHINES 0.375" CAPACITY Comes Exactly as shown in pictures. ITEM LOCATION:90016 LOCAL PICK UP FREE INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The above item description may have been taken from the internet for reference about the product. This information is to be used as an information reference only and not as a guarantee by TRINITY SURPLUS. Make Your Offer $49.00- You may be interested in on eBay. MILL-LATHE-TOOLS, USED ITEMS ARE TESTED AGAINST D.O.A. THEY ARE NOT REFURBISHED UNLESS STATED. NOT CALLIBRATED UNLESS STATED. Payment must be received in full within 7 days of the closing sale date. Confirmed paypal addresses ... moreare required for items over $200. Payment is accepted via PayPal. Personal check, cashier's check, or wire transfer. Items will be held until full payment is posted and cleared INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The buyer is responsible for all shipping. Handling, and insurance costs prior to shipment. No Insurance Unless stated. Shipping is available to all 50 states. Outer lying territories. Items will be shipped within 4 business days of receiving a cleared payment. Shipments will be carried via UPS. FEDEX, or USPS at our discretion. Insurance and signature confirmation are required for item purchases over $400. Combined shipping is available for items purchased within a 7 day period Returns are accepted within 7 days for items which are DOA or not as described. The buyer must report listing or description errors within 7 days of receipt. The return policy doesn't cover negligence. Abuse, or misuse of items. Items sold on an as is are not eligible for return. Returned items will be repaired. Exchanged, or refunded as we see fit. The buyer is responsible for all return shipping costs. Shipping and handling c
Machinist 2 1/2" Portable VICE BridgePort/Drill Press/Lathe/WorkHolding/Clamp
Machinist 2 1/2" Portable VICE as Shown Made in the U.S.A. Very portable if need be. This vice is in Very Good Condition. Open and close ok. The screw has a bow in it so drags a little after 1/2 way. Not much. Some drill holes in the bottom of the base between the jaws from over the years. Jaws are 1 1/2" deep x 2 1/2" across. These jaws will open up to 2 1/2" I only have one of these to pass on See photos at the top of this page for more details Shipping is estimated at 6 to 7 pounds
Machinist 4" BridgePort/Drill Press Portable VICE/Lathe/WorkHolding/Clamp Vice
Machinist 4" Portable VICE as Shown Small enough to be portable if need be. This vice is in Very Good Condition. Open and close very smoothly. Guaranteed! A few drill holes is all in the bottom of the base between the jaws and they are small. No biggie. Jaws are 3/4" deep x 3 7/8" across. No. 4 Vice. These jaws will open up to 4" I only have one of these to pass on See photos at the top of this page for more details Shipping is estimated at 7 to 8 pounds
R8 5/8" COLLET FOR BRIDGEPORT MILLING MACHINES #6270
R8 COLLET 5/8" ROUND FOR BRIDGEPORT TYPE MILLING MACHINES This item is used but appears to be in great shape WEIGHT IS APPROX. 1 Pound. 12 Ounces SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the tooling industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within ... more1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products
R8 COLLET 1/2" ROUND FOR A BRIDGEPORT MILLING MACHINE #6267
R8 COLLET 1/2" ROUND FOR A BRIDGEPORT MILLING MACHINE WEIGHT IS APPROX. 10 oz THIS ITEM IS USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the tooling industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after ... morepayment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS w
R8 COLLET 9/16" ROUND FOR A BRIDGEPORT MILLING MACHINE #6254
R8 COLLET 9/16" ROUND FOR A BRIDGEPORT MILLING MACHINE WEIGHT IS APPROX. 10 oz THIS ITEM IS USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the tooling industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after ... morepayment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS
2 5C Chuck Collets South Bend Bridgeport Machinist Gunsmith Lathe Milling Tools
Ebay Base This auction is for Two 5C chuck collets. The black smaller collet has epoxy filling in it but is still fully functional. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Small 3 tine Fork-Weidlich Sterling Spoon Co-Bridgeport, CT-5"-Lovely Plain Pat.
WELCOME TO MY AUCTIONS AND EBAY STORE- WoodRock. I AM NOW LISTING A NUMBER OF INTERESTING ITEMS OF ALL SORTS- SOME COINS- SOME SILVER- AND OTHER PIECES. CHECK BACK OFTEN. This auction is for a great Weidlich Sterling Silver Fork- perhaps a cocktail or oyster fork Marked: Weidlich Owl Mark Sterling, Pattern: Unknown- Perhaps WED13 or WED17 in Replacements Ltd Web site Designed in early 20th Century- Company was founded in Bridgeport CT in 1901- This is a vintage piece with no monogram. Length: 5 inches, Condition: Excellent used This silver piece is not monogrammed and is in excellent condition. I am glad to combine shipping. Thank You! A GREAT ITEM FOR YOUR COLLECTION OR FOR A GREAT GIFT! EMAIL ME WITH ANY QUESTIONS. THANK YOU! Terms and Conditions: All Store items are subject to prior sale! We accept online payments such as PayPal We only ... moreship to Confirmed Addresses when paying with PayPal; Items listed without Free Shipping will have the Shipping charge added to the final price. International Shipping are extra) All US Territories and International locations will be charged the actual USPS Shipping Cost from the USPS for delivery. There is a combined S&H Discount- please email for specific amount if important to you. For heavier items. Rolls of Coins, bulk Bullion and larger Antiques we charge the actual shipping cost plus a handling fee which is included in the quoted shipping costs below. We guarantee authenticity on all items we sell Return Privilege: Items that are not as described may be returned within 7 days of receipt for a full refund. Less S&H. Please note that items removed from their original holders are considered sold and are not returnable. If an item is to be returned. Please notify us via phone or e-mail prior to returning the item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these addition
Albert Pick & Company of Bridgeport Inc Nickel Silver Sugar Bowl with lid
Stamped Albert Pick& Company of Bridgeport Inc. Nickel Silver Sliver Soldered 7 oz. 0840 Measurements Handle to handle about 6" about 3 7/8 height to top of ornament on lid; about 2 1/2" high without lid; opening about 3" base about 2 2/ and about 12" round ar widest point(middle of) there are four visible dings or dents in the bowl; the one side of the lid has 2 small areas that are warped as if a spoon rested in that area. The handles has small nick spots; as does the base; the inside has two dark visible wear marks as well as other wear marks; there are tarnishd areas tht still need to be rubbed out. Albert Pick& co. is a hotel supplier that operates between 1885-1930+. All sales are final no refunds and no returns Sales are going to fund- Restoring or possible demolishing of my 1t.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e94fd1606-0xf1-
Putnam 3/4" Long End Mill HSS for Machinist CNC Bridgeport Mold Tool Die
One used Putnam 3/4" long reach end mill HSS 3/4" dia. of cut. 3/4" shank, 1 5/8" LOC, 3 1/4" depth of cut, 5 1/2" OAL Two flute Item in the picture is the one you will receive. I do not ship outside the USA PayPal only
Proto-trak EDGE Sharp CNC /Manual Vertical Milling Machine Bridgeport Trak Mill
Up for sale is a SHARP LMV Knee Mill with a PROTOTRK EDGE Control Up for sale is a Sharp LMV Kee Mill with a Prototrak Edge Control. It comes with One Shot Lube System. Chromed Quill, Honed Head, Precision Scraped V Ways on Ram, Ground Table with Coolant Trough. Double Saddle Locks,and Adjustable Ram Gib. Here are the specs: Table Size. 9"x 42" Longitudinal Travel. 30" Cross Travel. 12" Vertical Knee Travel.16" Ram Travel.18" Turret Rotation.360° Spindle Speeds(8)64- 4500 Spindle Taper.R8 Quill Travel.5" Motor.3HP. 220/3/60/460 Weight.2.300lbs. This machine has great features to help you be productive without the bells and whistles that make other CNCS more complicated. There are 19 different math helps are available for you to quickly and easily calculate intersections. Points of tangency centers and ... moremore. The most useful features of a DRO are available with the added plus of ballscrews for smooth positive control and motors for jogging. This will be a great machine even if you have never used a CNC before. You can learn the ProtoTrak Edge in a couple of hours. I am including a Self- Training Manual. It is easier to learn and to make parts on a ProtoTrak Edge than it is to use a DRO. You can create part libraries. Safegaurd part programs or share programs between other ProtoTrak machines. I would be happy to demo the machine. If you have an questions please me at 612-803-5414 This is a great machine with everything in great working order and ready to make parts. Can help buyer arrange loading and shipping. Happy Bidding!
BRIDGEPORT? 3.5" dia. 2 to 1 Dial Ratio BORING HEAD Machinist Tool Mill/Lathe NR
Here is a nice old Boring Head that I think is made by Bridgeport but I'm not for sure. It has a date on it of 1967 and a name of"N. Guthrie" It also reads"Dial Ratio 2 to 1" It measures 3.5" in diameter and is 5.25" tall to the end of the shaft which the shaft measures about 2.5" long and.75" in diameter. I know very little about this boring head so please ask any questions that you may have before bidding. Thank you for looking and please add $12.85 for shipping. Posted with
H.K. Porter Peerless 7-1/2 Hp Bridgeport Spindle Motor Fr D256AZB 1000-3600 RPM
This motor was pulled out of a Bridgeport textron milling machine that had been sitting for the past 20 years. Motor in working condition. RPM:1000-3600 Serial: NH96890 Frame: D256AZB Shipping price shown is for shipping in the US to lower 48 states only please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on day payment is recieved our hours are from 7am-4pm Central time. All items come with a 14 day gurantee unless stated in listing buyer pays return shipping unless stated otherwise NO RESTOCKING FEE.
BRIDGEPORT 2710 3" CONDUIT HANGERS
INCLUDES(1) BRIDGEPORT 2170 3" CONDUIT HANGERS ALL ITEMS THAT REQUIRE EXTRA SHIPPING DUE TO LOCATION WILL BE CHARGED THE EXTRA AMOUNT. VISIT OUR STORE FOR ALL OF YOUR INDUSTRIAL SURPLUS NEEDS OR CALL US AT(515) 832-5701. D1
F. ARMSTRONG of BRIDGEPORT CT / Pipe THREADING Stock Die Threader Chaser parts
About NE_ESTATE_SALES. Anything from old postcards to very new industrial equipment Quality and rare items. NEW and USED– from both residential and commercial sales along the Main Line of Pennsylvania… We sell only on e B a y! We GUARANTEE happiness with item. Delivery& service. A SIGNATURE may be required for some items over $300 Foreign delivery: Through registered mail& PRE-SALE arrangements! ONE WEEK DELIVERY for almost items. Total time: order to in hand. Industrial equipment and other large items are targeted for 10 day delivery. Expect USPS Delivery! 100% perfect for us. NO PICKUP REQUESTS! Any CONTACT should be through the eBay message system. Not external email. Any fixed price item priced at $5 or less is ENDING and will NOT be re-listed. Let us know we have succeeded with positive feedback… we will reciprocate! Our goal ... moreis always to earn your highest recommendation
1946 Envelope "Salvage Steamer Viking" San Pedro Ca to Bridgeport Conn
Postmarked San Pedro California(US Navy Harbor Craft base) January 23 1946 to Bridgeport Conn
Machinists (20) Indicol Clone Indicator Holder For Bridgeport
Very New Looking Possibly New Unused- Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" ... moreI BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSI
Mitutoyo Quill Kit for Bridgeport Type Mills, .0005"/0.01mm, with Mount
Includes mounting bracket. Used in good shape. Sold as is.
DR B JACOBS SMALL DRILL CHUCK 0-1/4 No 1B STAINLESS STEEL LATHE MILL BRIDGEPORT
BUY IT NOW NO WAITING. JACOBS CHUCK No 1B CAPACITY 0-1/4 126. STAINLESS STEEL. WITH STAINLESS STEEL SHAFT. IN EXCELLENT SHAPE. NEW IS OVER $200.00. YOU GET WHAT IS PICTURED AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $ 0.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT ... moreAND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS, WITH OUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BUYER AGREES THAT THE SELLER SHALL N
Bridgeport EZ Trak Mill EZ Path CNC Lathe CRT Monitor In Perfect Condition
Monitor for your EZ path Lathe If you want a monitor for your ez path lathe. This came off of a Bridgeport EZ Path CNC Lathe machine. They replaced it with an LCD monitor. The first picture was taken just before it was removed from the machine, works perfect. Thank you for your Business! Shipping will be 25.00! God Bless! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e985e8986-0xf7-
Bridgeport Milling Machine T RAM Adapter Plate
Bridgeport Milling Machine T RAM Adapter Plate for mounting Bridgeport Head to T RAM style Bridgeport. Call 203-592-8402 with any questions.Cash or Bank Check, no Pay Pal.
DIAL SET FOR BRIDGEPORT SERIES I MILLING MACHINE
DIAL SET FOR BRIDGEPORT SERIES I MILLING MACHINE YOU ARE BIDDING ON A DIAL SET FOR A BRIDGEPORT MILL 1 DIAL WITH 100 GRADUATIONS! 3 DIALS WITH 200 GRADUATIONS! The Dial Set pictured may not be the set sent although they will be in similar condition. This comes with a 14 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT.
BRIDGEPORT 1-1/2HP 3PH SPINDLE DRIVE MOTOR W/ PULLEY 's
BRIDGEPORT 1-1/2 2J-HEAD 3 PHASE MOTOR W/PULLEYS You are bidding on a used motor for a Bridgeport 2J head. This motor has tested and found to be in good working order. A 30 day return privilege is offered with the purchase of this motor. Shipping can be UPS or it can be picked up locally in Shelton. CT. SPEC 60Hz 230V/4.4A. 460V/2.2A Class B Insul. RPM: 1730 Frame: 245TY Frame: 145TY RPM 1415/1710 Type: TE Design: B Code: H Serial: A-25 Model: F6-x005-04-168. MFG: US Electric Motor This motor comes with a 30 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT. 30 Day Unconditional Warranty(must return freight prepaid) Check our Store and other Auctions for more great buys. Tag I.D. 5-5-13-6
Bridgeport 2 HP Mill Vari Speed with 9 x 42 Table With SONY DRO
NICE" BRIDGEPORT Milling Machine With SONY Digital Read Out This Machine Is"READY" TO WORK! Serial# 203588 2 HP R8 Spindle 9 x 42 Table From a local estate sale"WELL CARED FOR" by former"Hobby Recreational Machinist" Specifications Main Motor: Motor: 2 Horsepower Vari Speed 60- 500 RPM Low 500- 3000 RPM HI(currently wired for 208- 220 Volt- three phase) The Head is QUIET and Smooth through the Speed Ranges(Complete Head Rebuild( 6- 2012) SONY DRO Unit R 8 Spindle Nose Draw Bar Quick Position Operators Handle Bijur 1 Shot Way Oiler Chrome Ways New Spindle Bearings 6- 2012 with Head Rebuild X Axis Backlash.008 Y Axis Backlash.007 If you are needing a Bridgeport Ready to Work- Do NOT let this one pass you by This Machine is located in- Wichita KS- Can Be Seen Under Power Questions? Inspection? call Roger@ 316-214-8100 ... moreto schedule Free Loading Item Pickup is Preferred Buyer to make shipping arrangements Call Tara Land@ Freight Quote dot com 1-800-323-5441 x 1173 cstz Pallet Dimensions 60" L-R 48" F-B 60" H Weight w/ Pallet 2.200# Preferences are to use ESTES truck lines Close By 1.5 Mile and will deliver to dock. This saves YOU $$$$ Rasonable rates and helpful service Seller will assist with shipping NO international Bidders Electrical: 220/ 230/ 440/ 460 Volt. Three Phase Table: Overall Size: 9" x 42" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Table Load: 750 lbs. Height Above Floor: 47-1/4" Travels: Table Travel(X-Axis) 30" Saddle Travel(Y-Axis) 12" Knee Travel(Z-Axis) 16" Quill Travel: 5" Ram Travel: 12" Spindle: Throat Distance: 6.75"min. 18.75" max. Table to Spindle Nose: 2.5" min. 18.25" max. Spindle Diameter: 1.875" Quill Diameter: 3.375" Quill Feed: 0.0015/ 0.003/ 0.006 in.rev Taper: R8 Speed Range: Low(infinitely variable) 60- 500 rpm High(infinitely variable) 500- 3.000 rpm Head Adjustments: Head Cant(forward/back) 45 degrees Head Tilt(side to side) 90 degrees Head Swivel(side
(1) DIVIDING INDEX PLATE - MILLING HEAD ROTARY TABLE - BRIDGEPORT ENCO
This is a dividing index plate. I'm not sure exactly what it fits but the overall diameter is 4.850" and it is 0.300" thick. The two(counter-sunk) bolt holes are spaced 1.900" approx) center to canter. The numbers on this one are 32-28-26-25-24. Great quality and condition. Don't miss it as it includes FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& ... morepacking! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
Bridgeport Boring Head No.2, Pristine, Made in USA, 3" head, R8 Shank, Case
Up for sale is a Bridgeport No. 2 Boring Head and Tooling in an original case. This is an original Bridgeport tool. Made in the USA. Only the long cutter has seen substantial use. Most of the other cutters look unused. Head Diameter: 3.35" Overall Head Length: 2-7/8" Boring Bar Hole Size: 5/8" Shank: R8. Overall Length: 7" I showed this set to a machinist and he said"That's as good as it gets for used. Powered by The free listing tool. List your items fast and easy and manage your active items.
1936 BRIDGEPORT COMMEMORATIVE NGC MS 65
Nice.Certified coin. I only ship to continental USA and just accept Paypal. Thanks for looking.
Bridgeport Torque Cut 22 CNC Mill 1994
Good working condition. This vertical machining center is being replaced with a new 2013 Mill. Manuals are available. The mill was used in a tool room and not production.
42" Tbl 2HP Spdl Bridgeport Series I VERTICAL MILL, Vari-speed,Anilam DRO,R-8,Ch
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 42" Tbl 2HP Spdl Bridgeport Series I VERTICAL MILL. Vari-speed,Anilam DRO,R-8,Ch BRIDGEPORT SERIES 1 VERTICAL MILLING MACHINE MODEL: SERIES I. S/N: 12/BR 200309, NEW: 1982 SPECIFICATIONS: TABLE SIZE. ... more9" X 42" NUMBER OF T-SLOTS. 3 LONGITUDINAL TABLE TRAVEL. 30" CROSS TRAVEL. 12" QUILL TRAVEL. 5" KNEE TRAVEL. 16" RAM TRAVEL. 12" MAX/MIN DISTANCE. SPINDLE NOSE TO TABLE 18-1/2" 2-1/2" MAX/MIN DISTANCE. CENTERLINE OF SPINDLE TP FACE OF COLUMN. 18-3/4" 6-3/4" HEAD TILT. LEFT& RIGHT. 90 DEGREES HEAD TILT. FRONT& REAR. 45 DEGREES INFINITELY VARIABLE SPEED RANGE. 60-4.200 RPM SPINDLE TAPER. R-8 MAX COLLET CAPACITY. 3/4" QUILL TRAVEL. 5" QUILL FEEDS. 0.0015" 0.003" 0.006" APPROXIMATE WEIGHT. 2.000 LBS EQUIPPED WITH: ANILAM SPIRIT TWO AXIS DIGITAL READOUT SERVO POWER FEED FOR LONGITUDINAL TRAVEL CHROME WAYS ONE-SHOT LUBE SYSTEM BRIDGEPORT SERIES I MILLING HEAD 2/3 HORSE POWER SPINDLE MOTOR INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Click Here For More Bridgeport Machines Click Here For More Mills- VERTICAL MILLS- VERTICAL MILLING MACHINES(s
VINTAGE,OBSOLETE.PRE WWI.SPECIAL POLICE BRIDGEPORT,CONNECTICUT BADGE # 874
Pre-World War I Turn of the 20th Century Bridgeport Connecticut Special Police Numbered Department Badge This heavy nickel custom die badge with no maker marks. Measures 2-1/4 by 2-1/2 inches high It is slightly vaulted and has separately applied numbers 874. This is a old badge. Dating to the early 20th century. The condition is very good to near excellent. Please check all my pic's for better detail before bidding or buying Ebay This badge does not resemble a modern badge and meets eBay's guideline for defunct. Obsolete, and antique badges. It is at least 75 years old or older and is not a modern law enforcement badge. This badge is not in use by any law enforcement today. This badge holds no law enforcement authority.Badge is an Antique Collectors item. Accepted Payment: Pay pal only. Happy Bidding.Thank you
NICE PRECISE MODEL 1158 JIG GRINDER SPINDLE W/ CONTROL & R8 BRIDGEPORT SHANK
PRECISE JIG GRINDER SPINDLE MODEL 1158 45.000 RPM 1/2" H.P. R8 TAPER SHANK MODEL 7307J VARI-SPEED CONTROL Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, PayPal, and credit card accepted. Buyer pays actual shipping cost. Thanks for looking!
1959 Vintage BSA Boy Scouts Philmont Embroidered Neckerchief 7-11F Bridgeport CT
During the next few weeks we will be listing a variety of Boy Scout neckerchiefs purchased from an estate here in Virginia. Most appear to be from the Connecticut/New York area and the ones that are dated are from the late 1950's to early 1960's. I am assuming that the unidentified ones are from the same general area and era. All will be offered with no reserve and free shipping. This 1959 vintage neckerchief is embroidered with'Philmont Scout Ranch 7-11-F P2 1959 around and nicely embroidered mountain scene. Beautiful condition with good color. Nice addition to any collection! Buyer pays shipping. No reserve and free shipping. Satisfaction guaranteed. Please e-mail if you need additional information or photos. Will ship internationally. Powered by The free listing tool. List your items fast and easy and manage your active items.
meyers gage pins used on bridgeport
this is a very nice set that is no bull it goes from.250 down to.061 in.001 increment comes in a wood box made of oak it might have rust on them
STARRETT HIGH SPEED INDICATOR BRIDGEPORT MILL LATHE
Starrett high speed indicator has some pitting in the finish but turns freely includes a flat tip and cone shaped tip. Im assuming it's used to check the rpm of bridgeports and lathes. Selling as is no returns.Warranty, exchanges all sales final. On Apr-17-13 at 04:48:03 PDT. Seller added the following information:
BRIDGEPORT SERIES I CNC LOT OF FUSES AND CABLE PARTS ORIGINAL EQUIPMENT
THIS AUCTION IS FOR A LOT OF BRIDGEPORT SERIES I CNC FUSES AND CABLE. THIS IS ORIGINAL EQUIPMENT"SEE PICTURES" PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Bridgeport Police Department Safety Window Poster 1918 Rare CT Ephemera pc
STATE OF CONNECTICUT. BRIDGEPORT CT POLICE DEPARTMENT SAFETY FIRST WINDOW POSTER, MADE FROM VERY THICK CARDBOARD PAPER. HAS LIGHT EDGE WEAR& MINIMAL EDGE FOXING. TOP RIGHT HAS SMALL CREASE. MEASURES 12 1/4 X 8 1/4 VERY RARE FIND. All items in my auctions or buy it now Store items are used& do show normal wear. I will list any defects as I see them and will describe the items the best I can. If there is damage I will list it in the listing. The shipping charges on most of my items will be figured in the cost of the starting price of the item& will be listed as free shipping. Some items are to fragile to know what the total weight will be after packing& will have calculated shipping listed I do charge a $1.50 S&H Charge on my auctions to help pay for my shipping supplies. I offer a 100% guarantee on all the items I sell ... moreas long as they are returned as I sent them to you with the security markings still visible upon receipt of the returned item. Satisfied with the inspection of returned merchandise. I will then refund your monies via the same way you paid for the item. I pack very well and do not skimp on packing supplies. Remember the old airport luggage commercial where the monkeys are throwing the luggage and jumping on it in the luggage loading area. I pack to withstand this type of abuse and this is why I add a $1.50 charge for supplies, in the past years I have sent jardinieres and pedestals in the mail and they have been delivered with no breakage, So rest assured your item will be packed with care, so please pack and return the same way. I do not pay the return shipping costs. These costs will need to be absorbed by you the customer. When buying pottery& glassware there are mfg defects as glaze misses. Straw marks in the glass, the item not being perfectly straight etc. I will try to list any slight flaws to avoid conflict between parties. I will try to the best of my ability to remedy the situation without negative feedback if possible. Please communicate with me before leaving feedb
VINTAGE PUTNAM DYE FAN BRIDGEPORT OHIO ART NOUVEAU UNUSUALLY NICE
Very nice vintage Putnam Dye fan from Bridgeport Ohio.Only wear is to name of store.Far above average condition.Payment due in 24 hours of auction close.All sales final no returns.NO foreign lower US 48 only. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e9f31c2ae-0x104-
10025 Bridgeport Romi Centur 35E CNC Lathe, 1991
SN: 016000529-296 Control: Fanuc OT Specifications: Distance Between Centers. 40" Swing Over Bed. 20-1/4" Swing Over Cross Slide. 10" Cross Slide Travel with Tool in Turret. 5-1/2" Bed Width. 13-3/8" Bed Height. 12-5/8" Spindle Nose. A2-6 Spindle Hole Diameter. 2-9/16" Spindle Speed Range A1. 91-366 Spindle Speed Range Overall. 18-3500rpm Spindle Speed Range A1. 91-366 Spindle Speed Range A2. 332-1329 Spindle Speed Range B1. 241-963 Spindle Speed Range B2. 875-3500 Spindle Motor. 10hp Floor Space. 8' x 5' Machine Weight. 5700lbs. Features: GE Fanuc OT-C CNC Control 8-Position Disc Type Automatic Turret Hydraulic 8" Chuck Hydraulic Tailstock Complete Coolant System Several Manuals Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may ... moresell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of th
Antique BGI Bridgeport Gun Implement Co 1892 Patent Shotgun Cleaning Rod 6 pcs.
For your Bidding consideration in this Auction is a Gun Cleaning Rod with 3 Wooden/ Brass Sections and 3 different style brushes. The Rod is marked on 2 of the sections Brass parts"BGI CO. PAT. FEB. 9. 92" Without any of the brushes attached, it measures@ 36" long. It is in very nice, useable condition. I have made no attempt to clean either the wood or bras- leaving the original patina on both. All 3 of the brushes have a threaded brass fitting that fits the female end of the final piece of the Rod. I am also listing 3 other Lots of early Military Gun Cleaning Rods tonight so please see my other Listings. I do offer combined Shipping! SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have prov ided a few thoughts below to help you understand my practices ... moreand what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should pay for your items within 4 days of the Auction close. I use Ebay's system for payment reminder and notification. LISTING/ ITEM DESCRIPTION: Please ask questions- I try and describe items as best I can. And add corresponding Photos, but I don't always know what may be important to you. RETURN POLICY: I accept returns for full refund within 7 days of the auction close date if your receive the item and feel it was not as described. I do require you to contact me first. Before returning the item, to discuss however so I have a chance to understand your concerns. The best policy for both of us is for you to ask questions prior to bidding so please don't hesitate to contact me. An item sold"as-is" which I don't often do- only when I don't have the ability to test some
Bridgeport Series 2 R2E3 CNC Milling Drilling Boring Machine
This is a good used Bridgeport Series 2 R2E3 3 axis CNC MILL This mill includes: Side Computer CAD programming software Flood Coolant Automatic Oiler 4 tool holders Adjustable Angle Fixture Manuals Has a geared head with HIGH and LOW gear( 60 to 4200 RPM SPINDLE) Can handle a 1000 lbs work load Machine weighs approx. 5000 lbs and buyer must arrange shipping. This machine is in very good shape. It was used in a BMW engine cylinder head shop with very light use. Currently hooked and ready to operate. Located in Rancho Cordova. California Please call 916-804-2774 for more info or to schedule a onsite inspection.
End Mill 1/4 Corner Round 3 Flute HSS M42 for Machinist Gunsmith Bridgeport CNC
One Gently Used Hertel 1/4" Corner Rounding End Mill. 3 flute, 3/4" shank HSS M-42 Item in the picture is the one you will receive. I do not ship outside the USA PayPal only ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ea1041cf6-0x102-
GTD AMPCO 1-Inch Ball End Mill Bridgeport Machinist Gunsmith Milling Tool
Th is auction is a GTD AMPCO cobalt alloy HS 2-fluted Single ended Ball end mills with 1 inch shank Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show the items being auctioned from different angles and next to a ruler to show size
5 Cobalt HSS End Mills 5/8" Bridgeport Machinist Gunsmith Milling Tools lot
Th is auction is for a lot of 5 cobalt alloy HSS Double ended end mills with 5/8 inch shanks One is with 4-flutes and four are with 2-flutes Made by cleveland. TRW, Putnam, and others Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show the items being auctioned from different angles and next to a ruler to show size
NICE!! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE
aims NICE! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Bridgeport Machines. This is a Bridgeport Horizontal Rotary Table in GREAT condition. Serial# 11669 Now you can do hundreds of jobs that were never before possible using a standard drill press. You feed the work into the spindle by using any rotary of movements. Or use the table for accurate positioning of the work below the spindle. ... moreSpecifications: Table Diameter: 15" Table Graduation: 360 degree. T-Slot Dimensions: 1/2" x 1-1/4" x 1" deep. Center Hole Diameter: 1" Base to Table: 4-1/2" Overall Dimensions: 23" x 22" x 4-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE NICE! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE NICE! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE NICE! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE NICE! BRIDGEPORT 15" LOW-PROFILE HORIZONTAL ROTARY TABLE Reliable Tool Inc. c 2011 | Powered by
6 HSS Double End Mills 1/2" Bridgeport Machinist Gunsmith Milling Tools Lot
This auction is for a lot of 6 cobalt alloy& HSS Double ended 2& 4 flute end mills with 1/2 inch shanks Made by Morse. Weldon, Putnam, Cleveland, and others Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show the items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
Bridgeport standard shield II9-1200-Series I
Bridgeport standard shield. Appears that it was not used s ee pictures. Cleaning out an old shop so item is sold as is no returns. Thank you
BRIDGEPORT SET OF CLAMPING TOOLS W/ HOLDER
aims BRIDGEPORT SET OF CLAMPING TOOLS W/ HOLDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a Set of Clamping Tools with Holder in good condition. Set includes Clamping Studs. Coupling Nuts, T-Nuts, Step Blocks, etc. Features: Heat-treated Steel. Black Oxide finish. Holder is great for a organized benchtop. Back side mounting holes for wall mounting. Specifications: Bolt Sizes: 1/2"13 tpi. Bolt Overall Lengths Range: 3-1/8" to 8" Overall ... moreStand Dimensions: 3-1/2" x 13-3/4" x 8-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BRIDGEPORT SET OF CLAMPING TOOLS W/ HOLDER Reliable Tool Inc. c 2011 | Powered by
12 WWII Letters V-Mail Forms Merchant Marine SS Winfred L. Smith Bridgeport WW2
An original lot of around 12 World War Two letters that belonged to Merchant Marine John Spencer. These were letters written to him on V-mail envelope forms. The envelopes have the return address of Bridgeport. Connecticut and the send to address of the SS Winfred L. Smith. The letters are dated/postmarked 1944. Overall the letters are in very good condition. Some have some wear. If you have any questions feel free to ask. Thank you for looking. Please note I list new items every week. TERMS AND CONDITIONS Winning bid will pay $4.00 for shipping and handling. Shipping discounts available for multiple items won. For orders shipped in America take 50% off the regular shipping charge for each additional item won. Please note: The highest shipping and handling charge will be charged the full amount first. If you would like me to hold any items ... morewon to combine shipping with a future auction let me know and I will accommodate. I accept PayPal. Will ship to any location world wide. All shipping and handling rates to locations outside the United States are twice the listed amount in the item description. Buyers are responsible, for all customs, and international taxes, etc. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ea393b1f2-0x107-
13 WWII Letters Merchant Marine SS Winfred L. Smith Bridgeport Connecticut WW2 2
An original lot of around 13 World War Two letters including the envelopes that belonged to Merchant Marine John Spencer. These were letters written to him. The envelopes have the return address of Bridgeport. Connecticut and the send to address of the SS Frederick W. Taylor or SS Winfred L. Smith. The letters are dated/postmarked 1944 to 1945. Overall the letters are in very good condition. Some have some wear, some envelopes have wear. If you have any questions feel free to ask. Thank you for looking. Please note I list new items every week. TERMS AND CONDITIONS Winning bid will pay $4.00 for shipping and handling. Shipping discounts available for multiple items won. For orders shipped in America take 50% off the regular shipping charge for each additional item won. Please note: The highest shipping and handling charge will be charged the ... morefull amount first. If you would like me to hold any items won to combine shipping with a future auction let me know and I will accommodate. I accept PayPal. Will ship to any location world wide. All shipping and handling rates to locations outside the United States are twice the listed amount in the item description. Buyers are responsible, for all customs, and international taxes, etc. Powered by The free listing tool. List your items fast and easy and manage your active items.
BRIDGEPORT/SUPERMAX VERTICAL MILLING MACHINE
Item Name: BRIDGEPORT/SUPERMAX VERTICAL MILL Item# 10317 Price/Each: $2.990.00 Year: Brand Name: BRIDGEPORT/SUPERMAX Model: Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description BRIDGEPORT J HEAD ON A SUPERMAX TABLE J HEAD NO. J108439 SUPERMAX- MODEL YC 1 1/2 V MFG NO.1010518 9" x 42" TABLE VARIABLE SPEEDS: LOW-80/135/210/325 HIGH- 660/115/1750/2720 OILER 1 HP 230 VOLT 3 PHASE 50/60 Hz DIMENSIONS: 78"H x 59"W x 63"L WEIGHT APPROX. 2200 LBS. Contact Us About This Machine Should you have questions. Please contact David Drozdenko ... moreat 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shippi
Bridgeport Mill 42 Inch 'X' Axis feed screw
Bridgeport Mill 42 Inch"X" Axis feed screw. Original USA. Excellent condition. There is no measurable difference in the diameter of the screw. Any Questions call 516-698-5443. 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13ea4a45957-0xf0-
6 Cobalt HSS End Mills 1/2" Bridgeport Machinist Gunsmith Milling Tools lot
Th is auction is for a lot of 6 cobalt alloy HSS Single ended end mills with 1/2 inch shanks with 2 and 4 flutes Made by Eclipse. Putnam, Weldon, and others Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show the items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
BRIDGEPORT N0. 1 TOOL HOLDER BORING HEAD MILLING MACHINIST TOOLS *X
BRIDGEPORT N0. 1 TOOL HOLDER BORING HEAD MILLING MACHINIST TOOLS Condition/I n fo/Sizes: Some light rust spots. The tool is marked"Bridgeport" All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Items must be won in the same week for a combined shipping discount. Notify me if you plan on bidding on multiple auctions. Payment due within 3 days of auction close unless other arrangements are made with me before the auction closes. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking ... moreor insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
MACHINIST, MACHINE HANDLE,MILL, LATHE,BRIDGEPORT??? CRANK HANDLE
NICE MACHINE CRANK HANDLE, INSIDE DIA OF HOLE LOOKS TO BE 15/16" DO NOT KNOW WHAT KIND OF MACHINE IT GOES TO
VTG BOY SCOUTS OF AMERICA CAMPING HATCHET BRIDGEPORT STEEL WOOD WRAP HANDLE
Estate sale fin d. VINTAGE BOY SCOUT CAMPING HATCHET. BRIDGEPORT. You are buying as is. What you see is what you get. Look at pictures. You will like it. Combine items to save on shipping. Be sure and check out my other items while you are here and thanks for stopping by to take a look. I usually send out invoices within 24 hours after auction ends with correct shipping charges. IF YOU ARE FROM CANADA OR OVERSEAS THERE IS A $13.00 REGISTERED MAIL FILING FEE. DO NOT PAY UNTIL YOU GET CORRECT SHIPPING CHARGES! If I made an error in the description. And it is not what you thought it was, let me know and I`ll refund you your item purchase price including Shipping and Handling charges one way. That is once I get it back in same condition as when sent) Please do not leave Negative feedback without first giving me a chance to offer a solution. I`m ... moreNOT a expert in every field that I sell but try my best to describe all items correctly. Most of my items are used from Yard or Estate sales and I DO NOT clean them as it may ruin their value. Please ask any questions before bidding. All items are expected to by paid for within 3 days of end of sale or I`ll report you as a Non-paying bidder
Challenge Cutlery Bridgeport 3-5/8" bone stag Scouts Camping Camp Scout Knife
This Challenge Cutlery Bridgeport 3-5/8" bone stag Scouts Camping Camp Scout knife has been used and carried. There are no chips but there are two hard to see cracks in the bone scales. blades have good snap. We try to describe our knives as accurately as possible. But sometimes we miss something. If we have please contact us so we can make resolution. Thanks for your business! Check out my other items! Be sure to add me to your favorites list! Please email with any questions and check our other auctions! Any bone handles are bovine unless otherwise stated. International shipping is extra. Not responsible for non insured shipments. Combine wins up to 7 days(add $1.00 additional for each extra knife) for savings on shipping. if mailing payment include the closing date and item number with payment. Please email with any questions. We usually ... moreship within one business day after receipt of payment. Items not paid for in 10 days are subject to being relisted. Tennessee residents pay state sales tax.
1940's Bridgeport Milling Machine Attachments Brochure Catalog Literature
Vintage 1940's Bridgeport Milling Machine Brochures Two-seven page Brochures High Speed Milling Attachments catalog Model C 1/4" H.P. Milling Attachment Model M Drilling and Boring Attachment Model R Milling Attachment Adapters One has loose pages. Bridgeport letter head typed letter dated 1942 Price List Floor Plan and Master Quill Head Milling Attachment prints and a Bridgeport Turret Milling Machine Brochure. They have some tears. Writing and soiling. Please email with questions.
BRIDGEPORT Series I 2 HP 9" x 48" Tbl. Pwr Feed X & Y DRO 2000 (25722)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 25722. BRIDGEPORT VERTICAL MILLING MACHINE MODEL: Series I SERIAL NUMBER: 280929 Year: 2000 GENERAL SPECIFICATIONS Table Size: 9" x 48" Longitudinal Travel: 36" Cross Travel: 12" Knee Vertical Travel: 16" Ram Travel: 12" Quill Travel: 5" Spindle Taper: R-8 Spindle Speeds. Variable: 60 to 4200 RPM Feeds: 3) 1.5. 3, 6 IPR Head Swivel(Right/Left) 90 Degrees Head Tilt(Up/Down) 35 Degrees EQUIPPED WITH 2 HP Spindle Motor(New) Newall M-20 Two Axis Digital Readout Bridgeport Power Feed Longitudinal& Cross Chrome Knee Ways One Shot Lube Approximate Weight: 2000 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items ... moreare sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited
Bridgeport Mill Milling Machine Gear Box Powerfeed Top Plate Cover
Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
First Barnum Festival Program-1949-Bridgeport CT-Fully illustrated-V.FINE-No Res
Barnum-Barnes-Forepaugh-Ringling-4 Posters-Circus World Museum-1960-v.FINE(No Reserve-Bid& Item Will Sell. ITEM: This is the souvenir program for the very first Barnum Festival. Held in Bridgeport CT, June 10-14, 1949. Program is filled with text on Barnum's life as a showman and as a citizen of Bridgeport. Of the 48 pages, 38 have images of posters from his shows, Tom Thumb and family, Jenny Lind, clowns, Winter Quarters in Bridgeport, farming with elephants, testing a town bridge with elephants, etc. etc. A pictorial trip through time with America's greatest showman. He left his legacy in Bridgeport, and could now use your support. The Barnum Museum website is at: The following message is on that site. As they are recovering from a major disaster: Donate now to help the Bar num Museum Recovery! The historic structure of The ... moreBarnum Museum has been closed to the public since a tornado struck the City of Bridgeport on June 24. 2010 without warning and caused major damage to the building. The Museum's modern wing, People's United Bank Gallery, is open on a limited schedule: Thursdays and Fridays from 11 a.m. to 3 p.m. and for programs and lectures at other times. You can help sustain this legacy of P. T. Barnum by donating to the Museum's restoration fund. L isted on the National Register of Historic Places. The unique 1893 landmark is the only remaining structure in the country that is directly related to the great showman and icon of American entertainment history. Thank you for your generosity! You can donate to the Museum via PayPal if you go to their website. SIZE: 9 by 6 inches. 48 pages, with light card covers. DATE: June. 1949 CONDITION: In Very Fine. Almost MINT Condition. PLEASE NOTE- INSURANCE COST WILL BE ADDED TO FINAL SHIPPING. With no insurance. There would be no refund if lost or damaged. Multiple lots will be consolidated into one package, with only one shipping cost. There is NO charge for handling on anything that I sell.
VINTAGE BOY SCOUTS OF AMERICA BRIDGEPORT FLASHLIGHT
THIS VINTAGE BSA FLASHLIGHT IS IN VERY GOOD USED. READY TO USE CONDITION. PLEASE E-MAIL WITH ANY INFORMATION OR QUESTIONS. PLEASE USE CALCULATE FOR USPS SHIPPING COST( FLAT RATE ENVELOPE/ NO HANDLING FEE) YOUR ITEM WILL BE MAILED THE FOLLOWING SHIPPING DAY AFTER PAYMENT. WE SHIP TUESDAYS AND FRIDAYS. THANKS FOR LOOKING!
Set of 3 Bridgeport R8 Collets, 1/2" 5/8" Sutton INV=11062
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Set of 3 Bridgeport R8 Collets. 1/2" 5/8" Sutton No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage and liquidated damages, with no refund ... moregiven. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
Antique Framed Oil Painting Hudson River Valley Scull's Art Store Bridgeport CT
Antique Oak Framed Oil Painting Hudson River Valley Scull’s Art Store Bridgeport CT Primitive Painting is behind glass. Not signed. In frame this is 12 ½” X 14 ½” This is in the excellent condition as imaged with this auction. Images attached are both scans and photographs.
BRIDGEPORT #4 INDEXING PLATE for ROTARY TABLE or DIVIDING HEAD
BRIDGEPORT#4 INDEXING PLATE. This plate has 5 rows of holes. Starting from the outer row in the hole count is: 59- 46- 38- 32- 26. The OD of the plate is 5.5 inches. The center hole has a diameter of 1.25 inches. The mounting hole centerline is 2.25 inches. Any questions or comments please email me early. No international sales. We ship to U.S.A. addresses only. We will gladly combine items to save shipping expense. Powered by The free listing tool. List your items fast and easy and manage your active items.
22"x16"x20" Bridgeport CNC MILL Torq-Cut 22, Vertical Machining Center, 1995
T he machine is in good working order and under power for inspection. 1995 BRIDGEPORT TORQ-CUT 22 Vertical CNC Machining Center 7.5 HP AC Spindle 22 position BT-40 tool changer Table 33” x 14” Travel- X 22” Y 16” Z 20” Software– BOSS DX/32 V4.43/6.86.1G s old with the machine; 2 Accupro vises BT-40 tool holders Installation Manual Operator Manual Programming Manual Serial cable for program transfer BUYER IS RESPONSIBLE RIGGING AND SHIPPING- WILL LOAD ONTO QUALIFIED RIGGERS TRUCK. CASH. CERTIFIED CHECK, CLEARED CHECK.