In 
 
Order by: 
Available to: 
Price: 
 - 
$
9.99
Buy It Now
$9.85 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale is a like new condition #2 morse taper dead center for a lathe. The point is sharp. Looks to have never been used.
$
427.50
Buy It Now
$50.00 Shipping
Condition: New
Location: Canada
This sale is for one New Old Stock ( this chuck has been sitting in warehouse storage for 40 years or more) Atlas Press Co Model # 6466 6" 4-Jaw Independent ... morelathe chuck with integral 1-1/2"-8 threaded back. This chuck was made for Atlas by Pratt Burnerd in England. Pratt Burnerd and Atlas Later became one company call Pratt Burnerd Atlas Workholding. This chuck was made for the Atlas 10 and 12" lathes and is also perfect for South Bend Lathes with the same thread. The chuck comes new in the original box wrapped in the classic Pratt Burnerd Checkered Wax paper and is covered in a heavy protective oil. This will need to be cleaned with some solvent and a soft cloth. I have cleaned one quadrant of the chuck to show the chuck. Also included with the chuck is the key also wrapped and ready for use.
$
295.00
Buy It Now
$20.00 Shipping
Condition: Used
Location: Rochester, United States
Metal Lathe 6"4jaw Chuck W/2"dia Shank Southbend Logan Sheldon Atlas. Reverseable jaws nice chuck
$
44.95
Buy It Now
Free Shipping
Condition: Used
Location: Snowflake, United States
As you can see from the pictures, this is a well used tool, missing much of it's finish. For whatever reason one of the holes has been threaded.
$
20.00
Buy It Now
$3.00 Shipping
Condition: Used
Location: Mahwah, United States
Craftsman Atlas 10-12" Lathe Headstock Index Pin. Ball& Spring 10-42A This listing is for a Craftsman Atlas 10-12" Lathe Headstock Index ... morePin. Ball& Spring 10-42A in good condition. It includes everything in the photos. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 First Class Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
$
14.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
$
39.97
Buy It Now
Condition: Used
Location: Baltimore, United States
16-32 gear for Atlas craftsman 9" 10" 12" lathe.
$
47.50
Buy It Now
$5.53 Shipping
Condition: New – Open box
Location: Prosper, United States
There is minor surface tarnish on the face as seen in the photos. Teeth are in good condition as the gear is unused.
$
12.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Atlas/Craftsman No. 2987 Milling Attachment Instructions and Parts Manual Click for Our Complete ... moreCatalog Manual Description: Number of Pages: 8 This is a reproduction. Not a photocopy, of an original Atlas/Craftsman Milling Attachment Instructions and Parts manual. This manual contains 3 pages on installation, operating instructions, and parts for the milling attachment and the cutter holding set. The other 5 pages are more operating instructions for the Atlas/Craftsman Lathe Operations manual. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provid Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is
$
60.60
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
219.40
Buy It Now
$42.74 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
175.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. Number still ... morecan be read. Don't see much ware to the screw.
$
450.00
Buy It Now
$45.00 Shipping
Condition: New
Location: Canada
This sale is for one New old stock ( made decades ago and in storage ever since) Bison PUUm-S5 -1-1/2-8 ZD 5" 3-Jaw Scroll chuck. This chuck features ... more2 piece hardened reversible jaws complete with integral 1-1/2" x 8tpi threaded back for Atlas or South Bend Lathes. This chuck is old stock and comes wrapped in plastic sheeting and are covered in protective oil that will need to be cleaned off with some solvent . I have included photos of the chuck as you will receive it covered in oil and after i cleaned it. Made in Poland by one of the worlds best makers. Comes Brand new in the box and includes the key and paperwork as shown in the photos. Premium quality ! A scale shown is for size reference only and not part of the sale. We ship Wednesday through Friday and are happy to combine orders for shipping. Thank you for looking.
$
10.00
Buy It Now
$4.70 Shipping
Condition: New
Location: Carbondale, United States
Reproduction manual loaded on a USB Flash Drive. Can be played on any computer, flash drive player, laptop. This is a very good reproduction of the factory ... moreInstruction and Maintenance Manual. This is NOT an original manual.
$
40.00
Buy It Now
$5.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
100.00
Buy It Now
$9.90 Shipping
Condition: New
Location: Ferris, United States
OEM GENUINE ATLAS CRAFTSMAN 12" LATHE LEAD SCREW BEARING ASSY. P/N 3980-27. KIT INCLUDES TWO ROLLER BEARINGS WITH RACES, TWO SPACERS, TWO MOUNTING SCREWS, ... moreNUT AND BRACKET. SHIP TO US ONLY.
$
10.00
Buy It Now
$4.70 Shipping
Condition: New
Location: Carbondale, United States
Reproduction manual loaded on a USB Flash Drive. Can be played on any computer, flash drive player, laptop. This is a very good reproduction of the factory ... moreInstruction and Maintenance Manual. This is NOT an original manual.
$
495.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Rochester, United States
Lathe 6"3jaw Chuck Bison Set Tru Rev Jaws Southbend Atlas Logan Craftsman.
$
350.00
Buy It Now
Condition: New
Location: Ferris, United States
OEM Atlas Craftsman Lathe Complete Counter Shaft Assembly Part # 3980-60.. Replaces 990-293, fits Craftsman commercial lathes . Ship to US only.
$
29.99
Buy It Now
Condition: New
Location: Saint Charles, United States
202-6161. Thread size: 1-3/4"x 8, Diameter A: 8.11" B: 866" C: 925" D: 3.583" How to process back plate to guarantee Chuck's ... moreT.I.R? The semi-machined back plate has to be processed into fully-machined which is showed in the above fig before they can be mounted. The fully-machined back plate can be mounted onto 8" 3 jaw or 4 jaw self centering or independent lathe chuck(p/n 202-5434. 202-5412, 202-5474,202-6580) All back plates have 0.04" allowance. Please measure the size of Chuck's D1 before process your back plates. The size of back plates's D1 should be a little bit smaller than the size of Chuck's D1. Because the gap between back plate and chuck is smaller. Chuck's TIR is better. No gap is the best. You would not need to drill any mounting holes but you will need to turn the shoulder down.040" to match the back of the lathe chuck to make the chuck& back plate more concentric with the lathe spindle. When turning the shoulder of the backing plate. ONLY TURN THE SHOULDER OF THE BACKING PLATE WHEN ATTACHED TO THE LATHE SPINDLE. If you use a chuck to clamp the backing plate and then turn it, the backing plate will not be true to the lathe spindle and will have more runout than specified when the chuck and back plate are put together. Semi-machined, We have matching LATHE CHUCKS available: Lathe Lathe Chuck Diameter Brand Model Swing Spindle Thread 3" 4" 5' 6' Atlas, 6" 1/2"20, 202-6231, Atlas, 10100, 6" 1"10, Atlas, TH42, 10" 1-1/2"8, Atlas, 5991, 12" 1-1/2"8, Atlas, 3986, 12" 1-1/2"8, Emco Maier, Maximat V10, 5" M39x4mm, Grizzly, G8688, 7" 3" Flange, Grizzly, G4000, 9" M39x4mm, Harbor Freight, 33684, 7" 3" Flange, Harbor Freight, 45861(BV20) 9" M39x4mm, Homier, 03911, 7" 3" Flange, Jet, 920N, 9" 1-1/2"8, King, CH-920 AG, 9" M39x4mm, Logan, 9" 1-1/2"8, Logan, 10" 1-1/2"8, Logan, 11" 2-1/4"8, 202-
$
115.50
Buy It Now
$23.00 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
150.00
Buy It Now
$16.00 Shipping
Condition: New – Open box
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. Quality chuck! ... moreComplete with both sets of jaws and key.
$
29.99
Buy It Now
$4.99 Shipping
Condition: Used
Location: Uhrichsville, United States
This is a left hand holder so it faces to the right. It is for 3/16" tool bits. It is 4" long. The square for the bit is. 210", so it holds 3/16" bits. ... moreNice original for those smaller Atlas, Craftsman, Logan, Southbend lathes, etc.
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Atlas Clausing 12700 12" Pedestal Lathe Instructions and Parts Manual Manual Description: ... moreNumber of Pages: 24 This is a reproduction. Not a photocopy, of an original Atlas Clausing Model 12700 12" Pedestal Metal Lathe Instructions and Parts Manual. This manual contains information on installation, lubrication/oiling, maintenance, adjustments, and explosive view diagrams of all the parts with descriptions. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
77.65
Buy It Now
$24.49 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
75.00
Buy It Now
$6.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
200.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: North Grosvenordale, United States
Enco 30 series tool holders you are getting 4 A and one E.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Atlas Press Company 12- Inch Bench Lathes Model 3985& 3986 Click for Our Complete Catalog ... moreManual Description: Number of Pages: 21. This is a reproduction. Not a photocopy, of an Atlas 12" Bench Lathes for Model 3985&3986. This manual contains information on setup, lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments. This was also sold under the craftsman brand name. Contents: Installation: Mounting Lathe on Bench.4&5 Leveling.6 Lubrication Lubrication Chart.7 Controls And Operation Back Gear Controls.8 Changing Spindle Speeds.8 Headstock.8 Quick-Change Gear Box.9 Carriage.9 Tailstock.10 Sequence of Engaging Controls.10 Chucks and Face Plates.11 Maintenance and Adjustments Preventive Maintenance.11 Adjusting Gibs.11&12 Adjusting Spindle Bearings.12 Adjusting Compound and Cross Feed Cranks.12 Adjusting Lead Screw Safety Clutch.12 Checking Lead Screw Alignment.13 Adjusting Lead Screw Alignment.13 Parts Index Headstock.14 Quick-Change Gear Box.15 Saddle And Slides.16 Apron.17 Bed and Tailstock.18 Countershaft Assembly- Bench Model L
$
50.00
Buy It Now
$10.45 Shipping
Condition: Used
Location: Millstadt, United States
This item moves freely and the threads are clean. There is no rust whatsoever.
$
350.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. Its marked ... moreUnion 6 in Made in ANO U 770 Great quality chuck is nice and tight and works as it should.
$
300.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Nashville, United States
Threads in marvelous shape. No repairs breaks or surprises. Chuck is tight and well centered. Integral back plate for shallow space needs. Uses a standard ... moreone quarter inch socket square
$
19.95
Buy It Now
$5.95 Shipping
Condition: Used
Location: Neptune, United States
Original Atlas Press Co. 9-88 Sixty Degree Center In Box MT2 Craftsman Lathe i n excellent working condition but look at the pictures as this will be ... morethe one you receive.
$
184.95
Buy It Now
Condition: New
Location: Saint Charles, United States
SHARS 6" 4 Jaw Self Centering Lathe Chucks with TIR Certificate + 2-1/4-8 Back Plate New. For back plate you would not need to drill any mounting holes ... morebut you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
29.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: Neptune, United States
Look at the pictures as this will be the one you will receive.
$
115.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. If you want ... morea bunch of "gears" then sure we can talk but for one or two.
$
96.00
Buy It Now
$20.00 Shipping
Condition: New
Location: Canada
New Bison 5" Threaded Cast Iron Adapter semi-machined Chuck Back. Thread:1"x10tpi. Made in Poland. Box may not be present, and is shown for reference ... moreonly.
$
14.95
Buy It Now
$5.08 Shipping
Condition: Used
Location: Niagara Falls, United States
$
49.95
Buy It Now
$17.10 Shipping
Condition: Used
Location: Neptune, United States
$
24.99
Buy It Now
$7.10 Shipping
Condition: Used
Location: Neptune, United States
1 3/16" Roller Live Center 5/8" Straight Shaftin excellent working condition and you get the one you see in the pictures.
$
6.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Yorktown, United States
$
45.50
Buy It Now
$18.00 Shipping
Condition: New
Location: Canada
This sale is for 1 NOS Impex Tools 3 way Knurling Tool Holder No. 1114. Shank is approximately 1-1/8" x 1/2" A scale shown is for size reference only ... moreand not part of the sale. We ship Wednesday through Friday and are happy to combine orders for shipping. Thank you for looking.
$
30.00
Buy It Now
$2.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
27.00
Buy It Now
$18.00 Shipping
Condition: New
Location: Canada
5 piece Brass Rod Bars Set 11-7/8" Free Machining Lathe Live Steam. Diameters: 1/8", 5/16", 3/8", 1/2", 5/8", 3/4" Please See additional Pictures Below ... morethe Description.
$
24.70
Buy It Now
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 3"3 jaw or 4 jaw self centering and independent lathe chuck (p/n 202-5408, 202-5471, 202-5418). The size ... moreof back plates's D1 should be a little bit smaller than the size of Chuck's D1.
$
249.99
Buy It Now
$16.10 Shipping
Condition: New
Location: Berrien Springs, United States
Fits all Atlas Milling Machines. [1] 1/4" key. [2] 1" wide spacers. Also includes.
$
25.00
Buy It Now
$6.00 Shipping
Condition: New – Open box
Location: North Tonawanda, United States
NEW Precision Twist Drill Bit MT 2 Morse Taper 1/2 Lathe Mill South Bend Atlas. If this was used I would be shocked. I don’t see any signs of use.
$
165.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
All working parts hardened and precision ground. 250-104 (1PC) Heavy Duty Boring Bar Holder, can use 5/8" and 3/4" two size shank boring bars. 250-101 ... more(2PC) XL Over Size Turning & Facing Tool Holder use tool bits up to 5/8".
$
59.99
Buy It Now
$9.65 Shipping
Condition: Used
Location: Las Vegas, United States
This should be suitable for use on the 9" and 10-K South Bend, 9" or 10" Atlas, Craftsman, ans similar lathes.
$
53.95
Buy It Now
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 6" 3 jaw or 4 jaw self centering lathe chuck (p/n 202-5433, 202-5411,202-6188, 202-5473). The size of back ... moreplates's D1 should be a little bit smaller than the size of Chuck's D1.
$
5000.00
Buy It Now
$17.00 Shipping
Condition: New
Location: Schaumburg, United States
All working parts hardened and precision ground. 250 -110 Knurling and Turning Tool Holder. 250-104 Heavy Duty Boring Bar Holder, use 5/8 and 3/4shank ... moreboring bars. 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank.
$
98.81
Buy It Now
$30.21 Shipping
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
59.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
KDK Quick Change Tool Post Lathe South Bend Atlas Logan Craftsman no 1012123.
$
49.95
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 5" 3 jaw or 4 jaw self centering lathe chuck (p/n 202-5594). The size of back plates's D1 should be a little ... morebit smaller than the size of Chuck's D1. Because the gap between back plate and chuck is smaller, chuck's TIR is better.
$
100.00
Buy It Now
$11.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. The last pic ... morenot sure how valid it is because of the threads.
$
149.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Temecula, United States
Atlas Craftsman Lantern Tool Post Holders Wrench and 14 Cutters. JH Williams tool holders The lantern tool holder with rocker will fit an Atlas Craftsman ... morelathe. 14 Cutters (8 carbide) Boring Bar holder is Brink and Cotton USA Please look at pictures. There are some marks on tool holders. Some are a little wider than others, but all will fit lantern tool post. Items come as shown.
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Craftsman 12" Metal Lathe Instructions and Parts Manual Click for Our Complete Catalog ... moreManual Description: Number of Pages: 27 This is a reproduction of an original Craftsman/Atlas 12" Metal Lathe 101.28900. 101.28910, 101.28980, 101.28990 Instructions and Parts Manual. It covers the floor stand, bench and cabinet models. This manual contains information on installation, lubrication, operating instructions, and exploded view diagrams of the parts with descriptions. This manual covers the floor stand. Bench and cabinet models. Cabinet model shown above. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
225.00
Buy It Now
$90.00 Shipping
Condition: Used
Location: Saint Matthews, United States
Very Good Condition.
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Naperville, United States
Welcome to Old Time Service Manuals! You are bidding on a digital reproduction of a genuine Atlas/Clausing 12" Lathe 3980. 3981, 3982, 3983, 3009, ... more3991 User Manual etc. Series Parts List and User Manual Schematics Owners Manual. It contains a professionally reproduced copy of all the original Specifications. Parts Lists, Schematics, etc. that were included back in the days of yore when machinery was meant to last! Unfortunately. The machines themselves have outlasted many of the original service manuals(these are becoming rarer and harder to find as time goes by) Our goal here at Old Time Service Manuals is to offer a fabulous reproduction of out of print owners and service manuals at an affordable price. Each manual has been digitally reproduced and"cleaned up" by a professional computer artist to achieve the best results possible with the existing data available. The end result is a"new" manual(you get everything that you see in the pictures) in a looseleaf format. Including 3-hole punch so that you can store and organize your pages into binders. I will also include any additional extras, pages, ads, etc. that came with the originals. Some of these extras are a fun stroll down memory lane! This particular manual contains 18 pages total. This is a nice deal for someone looking for one of these hard to find manuals. These would also make a special gift without breaking the bank. Shipping is FREE in the continental United States and I will be sure to ship this item within 24 hours of your purchase. Feel free to email me with any questions that you may have or if you are looking for a particular manual that you cannot find. I will be constantly adding and updating my library. Thanks for looking and come back to visit us again in the future!
$
56.50
Buy It Now
Condition: New
Location: Saint Charles, United States
Fully machined back plate can be mounted onto 6" 3 jaw or 4 jaw self centering lathe chuck (p/n 202-5433, 202-5411,202-6188, 202-5473). The size of back ... moreplates's D1 should be a little bit smaller than the size of Chuck's D1.
$
14.99
Buy It Now
Free Shipping
Condition: Used
Location: Ivoryton, United States
Inventory # (1872). No machined Gib Screw divots on either side. Most likely from a small Atlas, Dunlap or Craftsman lathe. Found loose in a crate of ... moreused lathe parts. See photos for general condition of finish.
 In 

Former Listings  
 
Medium Delta Rockwell Crank Handle Part # BM-4-S Jointer Lathe Table Saw atlas
hand crank in good shape 7/16 hole with set screw chrome good shape
ATLAS CRAFTSMAN 12" METAL LATHE COUNTERSHAFT PULLEY BRACKET 041-119
UP FOR SALE IS COUNTERSHAFT BRACKET FOR ATLAS CRAFTCMAN 12' LATHE IN EXCELLENT CONDITION. PART NO.041-119. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. Or credit card by phone to my merchant account.MC, VISA,AMEX,DISCOVER) Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $4.95 USPS PRIORITY Mail with Delivery Confirmation. Insurance(if desired) will be an additional $1.75 I ship most items the next weekday after receiving ... morepayment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
CRAFTSMAN KEYLESS DRILL CHUCK 1/2 CAP MT1 LATHE PRESS MACHINIST TOOL ATLAS
CRAFTSMAN KEYLESS DRILL CHUCK CAP. 0-1/2 MORSE TAPER 2 SHANK MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Nameplate Badge & rivets from Vintage 12" Atlas Wood Lathe #7122 Serial #003645
This is a really nice 2 3/4" long 7/8" tall nameplate and 2 original mounting brads or rivets from a vintage Atlas 12" Wood lathe model 7122 Serial Number 003645 made in Kalamazoo Michigan. Has some wear and tear dust dirt and rust but In very good condition for age Local Pick-up available. I will combine shipping when practical on multiple purchases.
ORIG WILLIAMS AGRIPPA # 080 BORING TOOL HOLDER & 1/2" BAR ATLAS SOUTH BEND LATHE
J H WILLIAMS AGRIPPA BORING TOOL HOLDER NO. 080 1/2" AGRIPPA SLEEVE 11/32" X 3/4" X 4-3/4" LONG The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Atlas 10" Metal Lathe Headstock Inner Gear Guard Part # 9-152 Craftsman
Atlas 10" Metal Lathe Headstock Inner Gear Guard Part# 9-152 Craftsman It is in fine condition with some wear. Part#9-152. See pictures. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 10.0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-1449b7f91ab-0x106-
ARMSTRONG NO. 2030 LEFT RIGHT BORING HOLDER METAL LATHE TOOL SOUTH BEND ATLAS
ARMSTRONG BORING BAR TOOL HOLDER NO. 2030 11/64" X 13/32" X 5" LONG 1/4" BAR& WRENCH The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Atlas 10" Metal Lathe Apron Scroll & Split Half Nut Lever Handle Craftsman
Atlas 10" Metal Lathe Apron Scroll& Split Half Nut Lever Handle Craftsman The scroll and lever are in fine condition with some wear. The scroll is part#10D-38 and the lever is part#9-29. See pictures. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6.0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
milling machine and drill press vises,south bend lathe,atlas milling machine
2) vises.see photos for condition.one vise the screw backs from the jaw when retracted but tightens fine.The other is missing a bolt. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1449b7f83c4-0x104-
Atlas 10" Metal Lathe Carriage Apron w/ Knob & 24 Tooth Gear # 10F-9A Craftsman
Atlas 10" Metal Lathe Carriage Apron w/ Knob& 24 Tooth Gear Part# 10F-9A Craftsman The apron is in fine condition with some wear. The gear teeth show some wear. Part#10F-9A. See pictures. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 12.0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
J H WILLIAMS A-0-S STRAIGHT TOOL HOLDER SOUTH BEND ATLAS CRAFTSMAN METAL LATHE
J. H. WILLIAMS AGRIPPA STRAIGHT TOOL HOLDER NO. A-0-S 3/8" X 7/8" X 5" LONG ACCEPTS UP TO 1/4" TOOL BITS The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
Jacobs 18N Super Chuck 1/8" - 3/4" 2 MT Atlas Clausing Southbend Logan Lathe
This is a used 18N Jacobs Superchuck with 1/8 to 3/4" capacity. In good working condition with a new Jacobs 2MT to 4 Jacobs Taper shank. Has some scratches and nicks from use. Has a number scribed on it, see pictures for condition. I combine shipping whenever possible, if you win multible auctions, please wait for an invoice from me. Or pickup is always welcome. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
Jacobs 11N Super Ball Bearing Chuck 1MT Atlas Craftsman Lathe
A used Jabobs 11n Super Ball Bearing Chuck with 0-3/8" capacity. Included is a new Jacobs 1 MT shank. Has the regular scratches and nicks and a little rust from laying around. See pictures for condition. Good useable condition. I combine shipping whenever possible, if you win multible auctions, please wait for an invoice from me. Or pickup is always welcome. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
8 1/2 INCH FACE 1 1/2" - 8 TPI SPINDLE ATLAS LOGAN SOUTHBEND LATHE 9-365
A 8 1/2 inch diameter used face plate in excellent condition. Will fit an Atlas, Logan, Southbend or similar lathe with a 1 1/2" 8 TPI spindle. FREE EXPEDITED SHIPPING! U.S. ONLY) Thanks! PAYMENT– I accept PayPal only. Unless other arrangements are made. Payment must be made within 5 days or the item will be relisted. SHIPPING– I charge actual shipping. No extra fees. I will combine shipping for multiple items, please ask for an invoice if you are buying multiple items. SATISFACTION- I value my feedback rating and unless listed AS IS. Will guarantee your satisfaction. If you have any issues with the item you won, please contact me before leaving feedback and I will do all I can to make it right for you. Please inspect the item immediately upon receipt. If it does not meet your approval you may return it to me within 14 days for a full ... morerefund. Return shipping. Including insurance costs if necessary are the responsibility of the customer. I cannot be responsible for returned merchandise that is damaged in shipping.
Atlas 10 Craftsman 12 Lathe Leadscrew Bushing
Atlas 10 Craftsman 12 Lathe Leadscrew Bushing. Just the bushing as shown. You will need washers, spacers etc. not included to use this bushing. Thanks for looking.
ALLEN BRADLEY 350-AAV32A REVERSING DRUM SWITCH SOUTH BEND ATLAS METAL LATHE
ALLEN BRADLEY BULLETIN 350 SIZE 0 SERIES NO 350-AAV32A REVERSING DRUM SWITCH CONTROL MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1449fddcf73-0x117-
ATLAS CRAFTSMAN 6 MK2 10100 LATHE BANJO CHANGE GEAR BRACKET and lots more
Here are a group of parts off the Atlas 10100 6" lathe. There are 5 gears. 48, 23,72 and a 72/20. Includes everything shown and nothing else: Thanks for looking.
VERY NICE ORIG ATLAS CRAFTSMAN 6" 618 101 LATHE TAKE UP NUT SPINDLE COLLAR M6-32
Very Nice- Original headstock spindle collar for a 6" Atlas 618 or Craftsman 101 lathe. Collar is part number M6-32. Threads and set screw are in good order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144a00cd94d-0x109-
ORIGINAL ATLAS 10" LATHE 42" BED QUICK CHANGE LEAD SCREW
Original Atlas 10" lathe Quick Change Lead Screw for a 42" Bed. Lead Screw Measures approximately 40" in total length and the threaded portion is approximately 28 3/8" long. Lead screw show some wear but is overall a nice unit. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE LOT OF 3 SPIRAL END MILLS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Nice Lot of 3 Spiral End Mills for an Atlas. Craftsman or South Bend Metal Lathe. Marked"Weldon 5/8" B 20-3 GRD-HS" 2 15/16" total lenght, Weldon 1/4 A84 HS CAT BB8-2" 3 1/8" total length and"3/8 2409" 2 15/16 total length. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144a00cdfd5-0x11c-
Atlas lathe change gears 612, 618, Craftsman 101 Series
A very clean set of 9 change gears for your Atlas/Craftsman 612.618 or Craftsman 101 Package consists of 2 pieces of 32T. And 1 each of 36T, 40T, 44T, 46T, 52T, 54T, and 56T. They are in excellent condition with no issues at all The Part numbers all begin with M6-101 followed by the number of teeth. No spacers are included They are listed on the Atlas manual as M6-101X Change Gear Assembly.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-144a0186e72-0xfe-
ATLAS LATHE TAIL STOCK 7 INCH
YOU ARE BIDDING ON A TAIL STOCK MADE FOR A 7 INCH LATHE THE BASE MEASURES 4INCH LONG BY 2.5 INCHES WIDE CASTING IN VERY GOOD CONDITION&EVERYTHING WORKS I WAS INFORMED THIS TAILSTOCK IS FOR A RARE GOODELL PRATT NO.125 LATHE BUILT AROUND 1898.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144a018613f-0x101-
CRAFTSMAN ATLAS 10 12 METAL LATHE COUNTERSHAFT 4 STEP PULLEY
CRAFTSMAN ATLAS 10 12 METAL LATHE COUNTERSHAFT 4 STEP PULLEY Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~ center hole is 3/4" diameter; 1/8" key way 1/2" v groove measures 3" 4" 5" 6" diameters good ... morecondition tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax- Please contact me through ebay message system. Thank you!
CRAFTSMAN ATLAS 10 12 METAL LATHE 8 1/2" FACE PLATE 8 TPI
CRAFTSMAN ATLAS 10 12 METAL LATHE 8 1/2" FACE PLATE 8 TPI Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~ mounting hole 1 1/2" x 8 tpi some rust/will clean up threads are good tooling auctions: Lathes may vary in models/years/etc; ... moreplease be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax- Please contact me through ebay message system. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-144a0186e71-0xf8-
LATHE TAILSTOCK TURRET #2 TAPER FITS ATLAS CRAFTSMAN SOUTH BEND LOGAN
Lathe Tailstock Turret. Germany Made. Model E4-489 Fits Lathes with#2 Morse taper Attachment is in good used condition. Check out my!
CRAFTSMAN KEYLESS DRILL CHUCK 7/16 CAP MT1 LATHE PRESS MACHINIST TOOL ATLAS 618
CRAFTSMAN KEYLESS DRILL CHUCK CAP. 0-7/16 MORSE TAPER 1 SHANK MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
JACOBS DRILL CHUCK 6A CAP 0-1/2 MT2 METAL LATHE PRESS MACHINIST TOOL KEY ATLAS
JACOBS DRILL CHUCK NO# 6A CAP. 0-1/2 MORSE TAPER 2 SHANK MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
JACOBS 18N DRILL CHUCK W/ MT4 & KEY SOUTH BEND ATLAS CLAUSING LOGAN LATHE MILL
JACOBS 18N DRILL CHUCK W/ MT4& KEY OPERATES SMOOTHLY. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
MACHINIST TOOLS LATHE 2 Lantern Style Tool Post s for South Bend Logan Atlas
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
ATLAS CRAFTSMAN 6 INCH SWING LATHE TOOLING LOT HOLDERS FACEPLATE CENTER USED
ATLAS CRAFTSMAN 6 INCH SWING LATHE TOOLING LOT HOLDERS FACEPLATE CENTER USED Click to Enlarge ATLAS CRAFTSMAN 6 INCH SWING LATHE TOOLING LOT. 5 1/4 FACEPLATE WITH 1-10 THREADED MOUNT AND 1 DOG. ROCKER TOOL POST WITH WRENCH. 1 MT CENTER. L-R TURNING TOOL HOLDERS. ALL ATLAS BRAND USA MADE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-144a01bd9c0-0x10f-
MINTY Vintage & Genuine Live Center Atlas 618 Craftsman 101 Lathe 9-21122 WOW!
Up for your consideration is a vintage and genuine Craftsman 60° Point Live Center with a#1 Morse taper mounting shaft. This Live Center is in minty condition. If it has been used, I can’t tell and it comes with its original box too! The center/point turns smooth and free. On the end of the Morse taper it is marked with“21122” The picture is of the actual items being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license• Payment must be made within 4 days.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-144a01bf5b1-0x10b-
Atlas Craftsman 13-16" Lathe Tool Post Rocker Lantern Holder Logan South bend
Offered is a nice used Lantern style tool post for a 13" 16" South Bend or other type of similar lathes. This one came off of a South Bend. Includes all that is in the picture. Slot is.58 wide. t slot key is 1.75"x1.90"x.38"
1950s Atlas Belt and Disc Sander catalog brochure Kalamazoo MI Lathe Saw Presses
FROM A SMOKE FREE HOME. ORIGINAL vintage 4 page Atlas Press co Belt and Disc Sander catalog 5010. No date but looks to be mid to late 1950s era. PICTURE IS OF ACTUAL ITEM UP FOR AUCTION AS IS THE RULE WITH ALL MY AUCTIONS. Shipped in a plastic bag with backing board and securely packed for a safe journey. FAST EMAILS/FAST SHIPPING = GREAT SERVICE. ENJOY LIFE, IT'S SHORT, Perry! Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas # 9-8 Ram & # 10D-34 Screw for 10" & 12" Lathe Tailstock / MH 52
Hello Folks. Today we have an Atlas Ram, screw, washer, and woodruff key for 10" and 12" Tailstock. This ram is 1 1/8" in diameter x 5 1/4" long. Good used condition, with no damages. P lease check our Ebay store for other great collectibles. Trains, and tools, and as always don't hesitate to email us with any questions you may have regarding our items. We appreciate you. And thank you for shopping with us today, and as please know we take great care in wrapping your treasures so they arrive to you safely and promplty. We do appreciate your prompt payment, and take PayPal for your convenience. If payment cannot be made within 3 days please contact us to let us know, so we can make other arrangements such as a US Postal MO. We do turn over all unpaid items to Ebay for collection, and for credit on all of our Ebay fees.
Atlas # 10D-260 Tailstock Oil Dropper 10" & 12" Lathe / MH 51
Hello Folks. Today we have an Atlas# 10D-260 Tailstock Oil Dropper. Good used condition, with no damages. P lease check our Ebay store for other great collectibles. Trains, and tools, and as always don't hesitate to email us with any questions you may have regarding our items. We appreciate you. And thank you for shopping with us today, and as please know we take great care in wrapping your treasures so they arrive to you safely and promplty. We do appreciate your prompt payment, and take PayPal for your convenience. If payment cannot be made within 3 days please contact us to let us know, so we can make other arrangements such as a US Postal MO. We do turn over all unpaid items to Ebay for collection, and for credit on all of our Ebay fees.
PAIR OF DRILL CHUCKS for Atlas Craftsman South Bend Logan lathe
This listing is for a pair of drill chucks. They are both 1/4" One is a Jacobs 1B and the other keyless chuck has no name. They are in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
6" Atlas 618 Craftsman 101 lathe THREAD CHART M6-99A XCLNT!
This listing is for a 6" Atlas Craftsman lathe thread chart. It is easily read and in great shape. Comes with pins. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144a41c7623-0x116-
Atlas craftsman 6" follow rest follower followrest 101 6" 618 model metal lathe
Selling a follow rest for a 6" atlas craftsman metal lathe. This is for the model with the flat ways- not the v bed models. Great shape- maybe new? just needs a cleaning. pictures show condition. Shipped to your door for $165 total OVER THE NEXT 6 MONTHS(OR WHENEVER I GET TIME) I WILL BE LISTING SOUTHBEND AND ATLAS LATHE ITEMS FROM AN EDERLY RELATIVES SHOP. MOST ITEMS ARE GREASY OR DIRTY AND HAVE SCRAPES AND SCRATCHES ASSOCIATED FROM BEING USED IN A HOME SHOP. IF ANY KNOWN PROBLEMS EXIST I WILL STATE IT IN DESCRIPTION. I'M NOT WALMART SO ALL ITEMS ARE SOLD"AS IS" I WILL DESCRIBE ITEMS AS BEST TO MY ABILITY- IF YOU HAVE ANY QUESTIONS PLEASE ASK AND I WILL GET BACK TO YOU. IF THERE IS A PROBLEM DUE TO MY DISCRIPTION YOU CAN CONTACT ME AND WE WILL FIGURE SOMETHING OUT. ALL ITEMS WILL BE SHIPPED THRU THE POST OFFICE USUALLY ... moreWITH A FLAT RATE BOX. ALL SHIPPING PRICES REFLECT THAT YOU LIVE IN THE LOWER 48 STATES AND ARE USING FLAT RATE SHIPPING- SORRY BUT I ONLY SHIP WITHIN THE UNITED STATES. I DON'T SHIP TO CANADA. SOUTH AMERICA,OR EUROPE. SORRY,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144a5d1fcb0-0xff-
Southbend Atlas logan delta rockwell 4 jaw metal lathe chuck 1" 1/2-8 tpi
Selling a 4 jaw chuck for a southbend 9" metal lathe. It is made in usa.This is a 6" chuck with reversable jaws-has 1"1/2-8TPI spindle threads which is common on most smaller machines. please verify to see if your machine has the same threads.These threads are in good shape-chuck and threads could use a cleaning. pictures show condition. Shipped to your door for $175 total OVER THE NEXT 6 MONTHS(OR WHENEVER I GET TIME) I WILL BE LISTING SOUTHBEND AND ATLAS LATHE ITEMS FROM AN EDERLY RELATIVES SHOP. MOST ITEMS ARE GREASY OR DIRTY AND HAVE SCRAPES AND SCRATCHES ASSOCIATED FROM BEING USED IN A HOME SHOP. IF ANY KNOWN PROBLEMS EXIST I WILL STATE IT IN DESCRIPTION. I'M NOT WALMART SO ALL ITEMS ARE SOLD"AS IS" I WILL DESCRIBE ITEMS AS BEST TO MY ABILITY- IF YOU HAVE ANY QUESTIONS PLEASE ASK AND I WILL GET BACK TO YOU. ... moreIF THERE IS A PROBLEM DUE TO MY DISCRIPTION YOU CAN CONTACT ME AND WE WILL FIGURE SOMETHING OUT. ALL ITEMS WILL BE SHIPPED THRU THE POST OFFICE USUALLY WITH A FLAT RATE BOX. ALL SHIPPING PRICES REFLECT THAT YOU LIVE IN THE LOWER 48 STATES AND ARE USING FLAT RATE SHIPPING- SORRY BUT I ONLY SHIP WITHIN THE UNITED STATES. I DON'T SHIP TO CANADA. SOUTH AMERICA,OR EUROPE. SORRY
ATLAS 10" & CRAFTSMAN 12" METAL LATHE HEADSTOCK CLAMP 9-97
ORIGINAL ATLAS 10" 12" METAL LATHE HEASTOCK CLAMP PART NUMBER 9-97(CLAMP#1) PLEASE LOOK AT THE PICTURE AS IT IS PART OF THE DESCRIPTION. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144a719303e-0x112-
ATLAS 10" CRAFTSMAN 12" LATHE 56 TOOTH GEAR 56T
ATLAS 10" CRAFTSMAN 12" LATHE 56 TOOTH GEAR 56T Brand Atlas Packaging None Condition Excellent Quantity 1 3/4" Bore- 3/8" Thick I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
1948 Atlas 10" Lathe vintage print ad
Collectible Ads. Magazines& More. To see similar items click on a category just to the left of this description. Or type a keyword in the search box just above the categories for a more specific search. Check out my store by clicking on the red store logo: Be sure to subscribe to and add me to your favorites list! Ad Offered: Original 1948 Atlas 10" Lathe vintage print ad. As says SPEED AUTO REPAIRS.SAVE COSTS. A great little ad for desk or wall. Ad Size: Approximately 2 1/4" wide x 6" lnbsp; A great little ad for desk or wall. Ad Condition: Fine. No tears. No chips. Ad Source: Carefully removed from a vintage. Collectible magazine. Stored in an archival quality plastic sleeve. Combined Shipping Offer: We will combine shipping on ads ordered and paid at the same time. Visit our store to see what other shipping specials ... morewe might be offering. Payment: Payments accepted through PayPal. Sign up for; the fast. Easy, and secure way to pay online. Shipping: Ships within 2 business days of cleared payment. Packaging: Depending on the size of your order items are packed in a heavy duty mailing tube designed for sending prints and documents or in an envelope packed to keep your purchase flat. Guarantee: Item guaranteed as described. If not as described. Returns are accepted within 7 days. Buyer shall email us within 3 days of receipt of item stating problem. Refunds need to be authorized by us before return. Return shipping paid by buyer. Refunds given as money back. Powered by The free listing tool. List your items fast and easy and manage your active items.
ATLAS CRAFTSMAN 6" 10100 MK2 LATHE LEAD SCREW BEARINGS
Both lead screw bearings in very nice condition. Thanks for looking.
ATLAS CRAFTSMAN 10" 12" LATHE COMPOUND REST BASE AND jib
10' lathe rest and jib#10-301 chipped at screw hole but very usable[may not hold screw] has jib and adjusters look at pics please that;s what they are for
Atlas lathe 10" Compound Castings
For Parts. Atlas 10" Lathe Compound Castings. With gibb one gibb screw nut missing. Any Questions Please Feel Free To Ask. Thanks. Check out my!
5" CUSHMAN 3 JAW CHUCK 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 1 1/2 X 8 TPI
Original 5" 3 Jaw with Reversing Jaws Cushman Chuck for an Atlas. Craftsman, South Bend or Logan Metal Lathe. 1 1/2 X 8 TPI. Chuck measures 5" in diameter with a 2 1/4" body height. Chuck has some light marks as shown. Stamped on chuck is"THE CUSHMAN CHUCK CO. HARTFORD, CONN MADE IN UNITED STATES OF AMERICA REF NO 5340B" Comes with key. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE ORIGINAL ATLAS CRAFTSMAN 6 618 101 LATHE THREAD INDICATOR DIAL PART M6-62X
Nice- Original thread indicator dial for a 6" Atlas 618. MK2 or Craftsman 101 lathe. Retains original bolt and washer, as shown. Dial indicator very legible. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL ATLAS CRAFTSMAN 6 618 LATHE CARRIAGE BEARING TRAVEL GEAR CASE M6-11
Original carriage bearing gear assembly for a 6" Atlas 618 or Craftsman 101 lathe. Part M6-11. Includes both groove pins and mounting bolts. In good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
DUMORE TOOL POST LATHE GRINDER CAT 14-011 ATLAS SOUTH BEND LOGAN CRAFTSMAN
DUMORE Tool post grinder The Dumore Corporation. Mauston.WI USA Type 14-011 Model 8385 Volts 115 Amp 1.12 1/4" diam Arbor No Load rpm 16.000 Tool comes with extra Stones.Including a Collet for Internal grinding with two bits. LIKE NEW! Very LITTLE USE IF ANY. Comes with all parts shown on pictures. Check out my!
Atlas/ Craftsman 101 lathe HEADSTOCK #L4-2
12"Atlas/ Craftsman 101. lathe HEADSTOCK#L4-2. It as scuff marks and scratches. I can not get gears to turn. It is locked up. Only one side turns. I can not see any cracks in the gears. So buy as parts or repair. Buy as is
South Bend 9 10K Atlas Craftsman Lathe Threaded Face Plate TFP-100
This is a South Bend threaded face plate. 8 1/2 inches in diameter, 1 1/2- 8 threaded mount. Excellent condition, south bend part number TFP-100N. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL ATLAS CRAFTSMAN LATHE 6 INCH 4 PC DOGS
4 nice drive dogs. very little wear.1/2. 3/4, 1, 1 1/2 sizes. Thanks for looking.
ATLAS CRAFTSMAN 6 INCH LATHE 10100 motor PULLEY FINE USED and belt
This pulley is in really nice condition. The belt is intact though a little on the dry side. Still usable in my opinion but please consider a bones rather than a major portion of the auction. Thanks for looking.
Atlas / Craftsman 10" Metal lathe traverse gear 3/4" lead screw
Up for sale is the traverse gear for a 10" or 12" Atlas or Craftsman lathe with a 3/4" lead screw. As you can see it's broken. I know many people are buying them and then machine a new case with old gears. So here ya go, What you see in the pictures is what is included. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $5.00. Any questions let me know.
Atlas / Craftsman 10" Metal lathe tail stock assy
Up for sale is the tail stock assy for a 10" Atlas or Craftsman lathe The clamping pieces are present for the tail stock. The threaded portion and lock lever are missing. What you see in the pictures is what is included. I will take it apart for shipping purposes I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $15.00. Any questions let me know.
Atlas / Craftsman 10" or 12" Metal lathe electric motor mount assy
Up for sale is the electric motor mount assy for a 10" or 12" Atlas or Craftsman lathe What you see in the pictures is what is included. I will take it apart for shipping purposes I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $15.00. Any questions let me know.
Atlas / Craftsman 10" or 12" Metal lathe lead screw holder 3/4"
Up for sale is the lead screw holder for a 10" or 12" Atlas or Craftsman lathe that has a 3/4" leadscrew What you see in the pictures is what is included. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $5.00. Any questions let me know.
Atlas / Craftsman / southbend 10" or 12" Metal lathe 6" 4 jaw chuck US made
Up for sale is the 4 jaw chuck for a 10" or 12" Atlas or Craftsman lathe or southbend What you see in the pictures is what is included. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $12.00. Any questions let me know.
Lathe Chuck 5" Westcott Atlas Craftsman Logan 1 1/2-8 thread
For Sale: A Westcott brand lathe chuck. It is a 5" chuck(actual OD measures 5.180) It is a 3 jaw self centering chuck. The Chuck Key(T" handle) is included. The chuck has 1 1/2-8 threads(1 1/2" major diameter x 8 threads per inch) on the back to attach it to the lathe. This is a common size and is used on many Atlas/Craftsman lathes as well as some Logan lathes. It is not used on all lathes. So be sure to check your lathe's requirements to be sure this will fit. The chuck is in good working condition. I used it regularly until replacing it with a larger chuck a few days ago. Items included in this sale are the chuck. The jaws that are installed on it, and the chuck key. Check out the pictures, what you see is what you get. Originally this chuck had a second set of jaws. But I do not have them, and therefore they are not ... moreincluded with this sale. This chuck weighs about 15 pounds. So please pay attention to the shipping charges. I will be shipping USPS Priority Mail. The Chuck is used. I did not disassemble the chuck to clean it thoroughly. Therefore there will be some small metal chips in the jaw mechanisms. It is normal that small chips get into the jaw mechanism with normal use. That being said. The chuck does function properly and has a smooth movement.
Atlas / Craftsman 10" or 12" Metal lathe crossfeed handle
Up for sale is the cross feed handle for a 10" or 12" Atlas or Craftsman lathe What you see in the pictures is what is included. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $4.00. Any questions let me know.
Atlas / Craftsman 10" or 12" Metal lathe split half nut assy
Up for sale is the split half nut assy for a 10" or 12" Atlas or Craftsman lathe with a 3/4" lead screw What you see in the pictures is what is included. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $6.00. Any questions let me know. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144aa8230e7-0x114-
Atlas / Craftsman 10" or 12" Metal lathe gearbox assy great condition
Up for sale is the gearbox assy for a 10" or 12" Atlas or Craftsman lathe. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $8.00. Any questions let me know.
Atlas / Craftsman 10" or 12" Metal lathe cross feed gear and knob
Up for sale is the cross feed knob and gear for a 10" or 12" Atlas or Craftsman lathe. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $4.00. Any questions let me know.
ATLAS CRAFTSMAN 6" LATHE CARRIAGE AND TAILSTOCK CASTING 618
This auction is for a used Carriage and Tailstock Casting for an Atlas 618 or Craftsman 101 model 6" Lathe. The Carriage is missing parts but has a good cross slide with acme thread and brass nut.
Atlas / Craftsman 10" or 12" Metal lathe gearbox cover
Up for sale is the gearbox cover for a 10" or 12" Atlas or Craftsman lathe. No gears or levers are included. Only the cover. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $6.00. Any questions let me know.
Atlas / Craftsman 10" or 12" Metal lathe counter shaft assy
Up for sale is the counter shaft assy for a 10" or 12" Atlas or Craftsman lathe. Look closely at the large pulley. You will see that it is split open. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $14.00. Any questions let me know.
Atlas / Craftsman 10" Metal lathe compound on the apron
Up for sale is the compound for a 10" Atlas or Craftsman lathe. What you see is what is included. It is free and moves well, you can see that the graduations are pretty good condition as well. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $10.00. Any questions let me know.
Vintage 6 page ATLAS lathe brochure for 6" and 12" Metal Lathes and accessories
Here is a nice ATLAS catalog for their 6" and 12" Metal Lathes and accessories. I think it is mid 60's. Great information to have if you use one of these old lathes. Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas 10" Metal Lathe Compound Tool Post Slide and Upper Swivel Craftsman
Atlas 10" Metal Lathe Compound Tool Post Slide and Upper Swivel Craftsman The compound tool slide post and upper swivel are in fine condition with some wear. The dial is legible with some wear. The tool post slide has some edge wear. Comes with gib. Pins and set screws. See pictures. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 13.0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping when possible. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
ATLAS CRAFTSMAN 10-12 QUICK CHANGE GEARBOX LATHE 10-1550X COMPOUND GEAR+BUSHING
ATLAS CRAFTSMAN 10-12 QUICK CHANGE GEARBOX LATHE 10-1550X COMPOUND GEAR+BUSHING Click to Enlarge ATLAS CRAFTSMAN 10-12 INCH LATHE 10-1550X LARGE COMPUND GEAR WITH BUSHING FOR QUICK CHANGE GEARBOXES. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144aa8230e9-0x115-
ATLAS CRAFTSMAN 10-12 LATHE QUICK CHANGE GEARBOX INPUT GEAR AND SHAFT ASSEMBLY
ATLAS CRAFTSMAN 10-12 LATHE QUICK CHANGE GEARBOX INPUT GEAR AND SHAFT ASSEMBLY Click to Enlarge COMPLETE ATLAS CRAFTSMAN 10-12 INCH QUICK CHANGE GEARBOX LATHE INPUT SHAFT ASSEMBLY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN 10-12 INCH LATHE 10-1525X 16T QUICK CHANGE GEARBOX GEAR+BUSHING
ATLAS CRAFTSMAN 10-12 INCH LATHE 10-1525X 16T QUICK CHANGE GEARBOX GEAR+BUSHING Click to Enlarge FINE USED ATLAS CRAFTSMAN 10-12 INCH QC GEARBOX 10-1525X 16T GEAR WITH BUSHING. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1523 20T QUICK CHANGE GEARBOX GEAR USED
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1523 20T QUICK CHANGE GEARBOX GEAR USED Click to Enlarge RARE TO FIND ATLAS CRAFTSMAN 10-1523 20 TOOTH QC LEVER GEAR IN SOLID SHAPE. FITS 10-12 INCH QUICK CHANGE GEARBOXES. FOR LH LEVER ARM ASSY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1512 20T QUICK CHANGE GEARBOX GEAR USED
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1512 20T QUICK CHANGE GEARBOX GEAR USED Click to Enlarge RARE TO FIND ATLAS CRAFTSMAN 10-1512 20 TOOTH QC LEVER GEAR IN SOLID SHAPE. FITS 10-12 INCH QUICK CHANGE GEARBOXES. FOR RH LEVER ARM ASSY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1524X 32T QUICK CHANGE GEARBOX GEAR USED
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1524X 32T QUICK CHANGE GEARBOX GEAR USED Click to Enlarge RARE TO FIND ATLAS CRAFTSMAN 10-1524X 32 TOOTH QC LEVER GEAR WITH 3/8 I.D. IN SOLID SHAPE. FITS 10-12 INCH QUICK CHANGE GEARBOXES. FOR LH LEVER ARM ASSY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1513X 45T QUICK CHANGE GEARBOX GEAR USED
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1513X 45T QUICK CHANGE GEARBOX GEAR USED Click to Enlarge RARE TO FIND ATLAS CRAFTSMAN 10-1513X 45 TOOTH QC LEVER GEAR WITH 3/8 I.D. IN SOLID SHAPE. FITS 10-12 INCH QUICK CHANGE GEARBOXES. FOR RH LEVER ARM ASSY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-144aa82443b-0x112-
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1551 QUICK CHANGE GEARBOX COMPOUND GEAR USED
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1551 QUICK CHANGE GEARBOX COMPOUND GEAR USED Click to Enlarge RARE TO FIND ATLAS CRAFTSMAN 10-1551X 16/32 TOOTH COMPOUND GEAR WITH 5/8 I.D. IN SOLID SHAPE. FITS 10-12 INCH QUICK CHANGE GEARBOXES. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1552 QUICK CHANGE GEARBOX COMPOUND GEAR USED
ATLAS CRAFTSMAN 10+12 INCH LATHE 10-1552 QUICK CHANGE GEARBOX COMPOUND GEAR USED Click to Enlarge RARE TO FIND ATLAS CRAFTSMAN 10-1552X 16/32 TOOTH COMPOUND GEAR WITH 1/2 I.D. IN SOLID SHAPE. FITS 10-12 INCH QUICK CHANGE GEARBOXES. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ORIGINAL ATLAS CRAFTSMAN 12 INCH LATHE HEAVY DUTY STEADY REST SUPER CONDITION
ORIGINAL ATLAS CRAFTSMAN 12 INCH LATHE HEAVY DUTY STEADY REST SUPER CONDITION Click to Enlarge Click to Enlarge ORIGINAL AND SUPER CLEAN AND NEAR MINT ATLAS CRAFTSMAN 12 INCH HEAVY DUTY STEADY REST. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
ATLAS CLAUSING LATHE Electric Motor Mount
This is a motor mount for Clausing and Atlas Clausing lathes. Probablablt made in the late forties to early 50's. Cast iron construction with a 1" pin. This would bolt onto either a cabinet or leg under these lathes.
ATLAS LATHE CRAFTSMAN CLAUSING VERNIER CALIPER 14in.
THIS IS A HEAVY DUTY STAINLESS STEEL VERNIER CALIPER WITH FINE ADJUSTMENT MICRO ADJUSTMENT SCREW AND LOCKING SET KNOB JAWS LONG FOR INSIDE MEASUREMENT CASE INCLUDED ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144aa824377-0xfc-
ATLAS LATHE CRAFTSMAN SURFACE PLATE
6inX9in CAST IRON MIMI SURFACE PLATE SURFACE IS PRECISSION GROUND FLATE AND IS IN VERY GOOD CONDITION GOOD FOR MEASUREING AND LAYOUT OF WORK NOTE BEFORE SHIPPING SURFACE PLATE WILL BE CLEANED AND POLISHED g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144aa824510-0x101-
ATLAS CRAFTSMAN 12 METAL LATHE THREAD DIAL ASSEMBLY PT NO. 9-63
This listing is for a 10-12" Atlas Craftsman lathe thread dial 9-63. The markings are easily read. There are no chipped or broken teeth. It spins freely. It is in excellent condition.
Atlas Lathe 3C Collet draw bar adapter and spindle protector
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Atlas Lathe 3C Collet draw bar adapter and spindle protector good condition Check all the pictures S old AS IS. All sales final! Used the shipping calculator for shipping cost. Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
ATLAS 3020 3030 3040 8" TABLE SAW MACHINERY HANDWHEEL LATHE MILLING MACHINE
ORIGINALLY FROM 3020 ATLAS SAW ARBOR TILT HANDWHEEL OR OTHER MACHINERY APP'S PER SPEC'S ATLAS PART 9-23 4 1/8" O.D. 3/8" BORE WITH 1/8" KEYWAY GOOD SIZE BORE AND KEYWAY 2 3/8-16 NUTS- TEARDROP HANDLE IS TIGHT AND NOT BENT 3/8" BORE IS 1" LONG SAME HANDWHEEL FOR BLADE ELEVATION OTHER THAN HARDWARE MINOR CLEAN LITE PAINT OVER SPRAY MARKED TILT FOR SHIPPING REF ONLY SEE MY OTHER AUCTIONS FOR ATLAS SAW PARTS
Atlas 6" Lathe Threading Handbook
Original booklet for threading on the 6" Atlas lathe. Very comprehensive. Covers fundamentals on odd threads like French standard threads. Metric, Coil winding, tool grinding etc. Nice complement for someone with a restored 6" Atlas Lathe.
Set of Metal Lathe #2MT Dead Center Southbend Clausing Atlas Craftsman
Set of Metal lathe Dead Centers as shown in the photo. They are all#2 Morse Taper. As shown in the photos. Wear on the tips, one tip has been cut off, but all should be useable as is or with a little refurbishment. This is used but should function as required with some cleaning up and elbow grease. Sold as is with no returns. So please ask for any additional dimensions before you buy it. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-144aa8591d0-0xf2-
Atlas Milling Attachment Craftsman Logan Metal Lathe Machinist
This milling attachment is in great shape it also comes with the v channel jaw Posted with
Atlas Logan Craftsman Metal Lathe Face Plate & Dogs
6 inch face plate with dogs 1 1/2 by 8 threads Posted with
Atlas Craftsman Logan Metal Lathe Collet Closer
Lever style collet closer with 9 collets 1/8. 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and one that does not have a size on it these are 3at style collet this also has the taper that goes into the head stock every thing is in good working order Posted with
Atlas Craftsman Metal Lathe Turret Tail Stock
This is a 6 position turret tail stock for a 9 inch atlas craftsman lathe all parts move freely but I have never used it on my machine Posted with
Southbend collet handwheel set up logan atlas craftsman metal lathe collets 9"
Selling a very rare handwheel collet setup from a 9" southbend metal lathe. This has the common 1" 1/2-8 TPI threaded mount. This should also fit atlas logan and craftsman lathes with that same size spindle threads. Good condition- It just needs a cleaning. Comes with all 20 collets pictures show condition. The flaws i can see on it are 15/64 and 7/32 collets are sprung but still look usable. The other collets have scrapes and scratches on them. There is a hairline crack from the spanner wrench which is shown in 1 picture- doesn't look to bother anything just want to note that. This will be shipped in a large flat rate box.So it will NOT come with the wood rack unless you want to cover the extra shipping costs. Then it would have to ship in some other type of larger box. OVER THE NEXT 6 MONTHS(OR WHENEVER I GET TIME) I WILL ... moreBE LISTING SOUTHBEND AND ATLAS LATHE ITEMS FROM AN EDERLY RELATIVES SHOP. MOST ITEMS ARE GREASY OR DIRTY AND HAVE SCRAPES AND SCRATCHES ASSOCIATED FROM BEING USED IN A HOME SHOP. IF ANY KNOWN PROBLEMS EXIST I WILL STATE IT IN DESCRIPTION. I'M NOT WALMART SO ALL ITEMS ARE SOLD"AS IS" I WILL DESCRIBE ITEMS AS BEST TO MY ABILITY- IF YOU HAVE ANY QUESTIONS PLEASE ASK AND I WILL GET BACK TO YOU. IF THERE IS A PROBLEM DUE TO MY DISCRIPTION YOU CAN CONTACT ME AND WE WILL FIGURE SOMETHING OUT. ALL ITEMS WILL BE SHIPPED THRU THE POST OFFICE USUALLY WITH A FLAT RATE BOX. ALL SHIPPING PRICES REFLECT THAT YOU LIVE IN THE LOWER 48 STATES AND ARE USING FLAT RATE SHIPPING- SORRY BUT I ONLY SHIP WITHIN THE UNITED STATES. I DON'T SHIP TO CANADA. SOUTH AMERICA,OR EUROPE. SORRY
Atlas craftsman milling attachment mill 6" 101 6 618 model metal lathe
Selling a milling atachment for a 6" atlas craftsman 618 metal lathe. This is for the model with the flat ways- not the v bed models. Great shape- just needs a cleaning. Will NOT fit the larger 10" models. Botttom mounting hole is 1.250" pictures show condition. Shipped to your door for $250 total OVER THE NEXT 6 MONTHS(OR WHENEVER I GET TIME) I WILL BE LISTING SOUTHBEND AND ATLAS LATHE ITEMS FROM AN EDERLY RELATIVES SHOP. MOST ITEMS ARE GREASY OR DIRTY AND HAVE SCRAPES AND SCRATCHES ASSOCIATED FROM BEING USED IN A HOME SHOP. IF ANY KNOWN PROBLEMS EXIST I WILL STATE IT IN DESCRIPTION. I'M NOT WALMART SO ALL ITEMS ARE SOLD"AS IS" I WILL DESCRIBE ITEMS AS BEST TO MY ABILITY- IF YOU HAVE ANY QUESTIONS PLEASE ASK AND I WILL GET BACK TO YOU. IF THERE IS A PROBLEM DUE TO MY DISCRIPTION YOU CAN CONTACT ME AND WE WILL ... moreFIGURE SOMETHING OUT. ALL ITEMS WILL BE SHIPPED THRU THE POST OFFICE USUALLY WITH A FLAT RATE BOX. ALL SHIPPING PRICES REFLECT THAT YOU LIVE IN THE LOWER 48 STATES AND ARE USING FLAT RATE SHIPPING- SORRY BUT I ONLY SHIP WITHIN THE UNITED STATES. I DON'T SHIP TO CANADA. SOUTH AMERICA,OR EUROPE. SORRY
ATLAS LATHE 10" AND 12" BELT TENSION ROD
THIS IS THE BELT TENSION ROD FOR THE 10" AND 12" ATLAS BENCH LATHES. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
Vintage Atlas Craftsman Manual of Lathe Operation 1955 16th Edition BOOK
UP FOR GRABS IS THIS AWESOME CRAFTSMAN MANUAL OF LATHE OPERATION AND MACHINISTS TABLES. THIS IS SO NEAT! It is a little dirty but no missing pages or etc. And the cover is showing wear around the edges! This is the 16th edition 1955. Thank you for looking! Posted with
ORIGINAL ARMSTRONG NO 2010-L TOOL HOLER FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
Original Armstrong No 2010-L Cut Off Tool Holder for an Atlas. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.