In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
699.99
Buy It Now
$19.99 Shipping
Condition: Used
Location: Pomona, United States
What you see in the photos is exactly what You will receive no other accessories included! Scanning range : 0,1-10,0 m.
$
300.00
Buy It Now
$21.85 Shipping
Condition: Used
Location: Robertsdale, United States
When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. THIS IS A USED ITEM. Warranty Information ... moreSEE PICTURES.
$
600.00
Buy It Now
Free Shipping
Condition: New
Location: Rolla, United States
. Brand new item still sealed in oem packaging. $700+ new. AMADA Laser Bend Mirror Concave II-VI 71514619 175-105392-12 5.3 mcc/mmr
$
1349.99
Buy It Now
Free Shipping
Condition: New
Location: Rexburg, United States
$
1799.00
Buy It Now
Condition: For parts or not working
Location: Euclid, United States
Manufacturer: AMADA. See details below. Larger pallet sizes cost more. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads ... moreor partial truckload loads (flat bed, step deck, double drop, etc.).
$
469.00
Buy It Now
$53.96 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
1350.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
$
18359.00
Buy It Now
Condition: For parts or not working
Location: Watertown, United States
Inventory Number: 11230100004. Manufacturer: AMADA. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload ... moreloads (flat bed, step deck, double drop, etc.).
$
135.00
Buy It Now
$35.00 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
225.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
Removed from running machine.
$
74500.00
Buy It Now
Condition: Used
Location: Lincolnshire, United States
Bed and Saddle — The optimized rib layout and high-rigidity bed structure (with a low center of gravity) were developed through extensive structural analysis. ... moreThe massive bed and thick saddle support heavier work-pieces with outstanding precision and flatness.
$
347.00
Buy It Now
$50.13 Shipping
Condition: Used
Location: Louisville, United States
Amada 30 Degree DBL V Die 32 7/8 L, 1/2 W x 5/16 W, H 1 1/2 - Amada 30 Degree DBL V Die 32 7/8 L, 1/2 W x 5/16 W, H 1 1/2. The Tooling Emporium is located ... morein downtown Louisville KY. We have a very large inventory of tooling.
$
250.00
Buy It Now
$24.00 Shipping
Condition: Used
Location: Bayonne, United States
Wilson Tool / Amada. one (1) Wilson Tool Punch & Die Turret Press Stamp. 0.250 x 1.500 RT (Series 90). (3535-227)You are purchasing what is shown in photos ... moreonly. All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
$
250.00
Buy It Now
$21.85 Shipping
Condition: Used
Location: Robertsdale, United States
THIS IS A USED ITEM. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
$
330.75
Buy It Now
Free Shipping
Condition: Used
Location: Rosedale, United States
They are 146mm in length. We are here to help! Manufacturer:Wilson Tool. Model#:884684. Local Pick up. 2 = Poor-Fair.
$
225.00
Buy It Now
$21.85 Shipping
Condition: New – Open box
Location: Robertsdale, United States
When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
$
21500.00
Buy It Now
Condition: Used
Location: Phoenix, United States
33 Ton Amada Pega 345 CNC Turret Punch. Model Pega 345. Manufacturer Amada. Speed and Efficiency: These machines feature high-speed punching capabilities, ... moreallowing for rapid production cycles and increased productivity.
$
329.00
Buy It Now
$20.26 Shipping
Condition: Used
Location: Louisville, United States
Amada 90 Degree V Die 32 15/16" L x 1 3/16" H x 1/2" W - Amada 90 Degree V Die 32 15/16" L x 1 3/16" H x 1/2" W. The Tooling Emporium is located in downtown ... moreLouisville KY. We have a very large inventory of tooling.
$
9500.00
Buy It Now
Condition: Used
Location: Bellport, United States
Used, working unit.
$
3500.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
Removed from running machine.
$
225.00
Buy It Now
$24.00 Shipping
Condition: Used
Location: Bayonne, United States
Wilson Tool / Amada. Wilson Tool Punch & Die Turret Press Stamp. (3530-227)You are purchasing what is shown in photos only. All photos are of the actual ... moreproduct(s) you will receive and are intended to help describe the quality and condition of the piece(s).
$
26900.00
Buy It Now
Condition: Used
Location: Canada
Model: AMADA FBD-8025FS (1996). Press Brakes. Motor Power equipped with Open Height Throat Depth Between Uprights.
$
20399.00
Buy It Now
Condition: For parts or not working
Location: Euclid, United States
Model Number: RG5020LD. Manufacturer: AMADA. Capacity: 50 TONS X 82". (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads ... moreor partial truckload loads (flat bed, step deck, double drop, etc.).
$
200.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Pensacola, United States
As is used condition. One seems to be complete.
$
600.00
Buy It Now
Free Shipping
Condition: Used
Location: Lynnwood, United States
These slide on the front support arm on Amada RG series press brake. Location: Table.
$
203.21
Buy It Now
Condition: Used
Location: Canada
Amada Press Brake Die Holder Quick Change Combo Punch Adapter 95300 Cost $450.00 New ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3592 THERE IS A $15.00 ... moreHANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
$
49500.00
Buy It Now
Condition: Used
Location: Toledo, United States
RATED POWER. . 4000 WATTS. MAX CUTTING SIZE. 5' X 10' (61” X 122.8”). MODEL. . FO-3015NT. MODEL. . Fanuc A04B-0815-B301. ORION AIR DRYER.
$
1200.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
Nice condition.
$
600.00
Buy It Now
$62.89 Shipping
Condition: Used
Location: Robertsdale, United States
Warranty Information When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. SEE PICTURES.
$
220.50
Buy It Now
Free Shipping
Condition: Used
Location: Rosedale, United States
Manufacturer:Wilson Tool. 2 = Poor-Fair. 4 = Like New.
$
200.00
Buy It Now
$21.85 Shipping
Condition: Used
Location: Robertsdale, United States
THIS IS A USED ITEM. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
$
6800.00
Buy It Now
$115.52 Shipping
Condition: Used
Location: Pilot Rock, United States
No.: 16030125.
$
8399.00
Buy It Now
Condition: For parts or not working
Location: Euclid, United States
Model Number: HFA400W. Manufacturer: AMADA. See details below. Larger pallet sizes cost more. Capacity: 18' X 23 1/2". (c) Truckload and Partial Truckload: ... moreHGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
$
799.00
Buy It Now
$28.00 Shipping
Condition: Used
Location: Coloma, United States
Nice louver Punch and Die Assembly. Believed to be Wilson.
$
64.99
Buy It Now
Free Shipping
Condition: Used
Location: Ventura, United States
Model: 42802F. MPN: 42802F. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
$
49.00
Buy It Now
$21.34 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
175.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Bayonne, United States
Wilson Tool Punch & Die Turret Press Stamp. Wilson Tool. (3492-222)You are purchasing what is shown in photos only. All photos are of the actual product(s) ... moreyou will receive and are intended to help describe the quality and condition of the piece(s).
$
34500.00
Buy It Now
Condition: Used
Location: Santa Ana, United States
Our inventory is updated daily. We'd love to help you find it. Ask us about our Finder's Fee Program. Foot Pedal.
$
1499.95
Buy It Now
Free Shipping
Condition: Used
Location: Valencia, United States
$
500.00
Buy It Now
$37.97 Shipping
Condition: Used
Location: Robertsdale, United States
Warranty Information When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. SEE PICTURES.
$
99500.00
Buy It Now
Condition: Used
Location: Novi, United States
Cutting Capacity - Square 31.49" x 27.56". Hydraulic Pump Motor 5 hp. Saw Blade Motor 25 hp. Blade Speed 15-80 m/min (50-260 ft/min).
$
4950.00
Buy It Now
Condition: Used
Location: Holland, United States
HYDRAULIC BLADE DOWN FEED. YES. PASS LINE HEIGHT. . 27". CAPACITY SQUARES. . 10" X 11". CAPACITY ROUNDS. 10". MODEL. . HA-250. BLADE SIZE. . 1" X. 042" ... moreX 137".
$
39500.00
Buy It Now
Condition: Used
Location: Rockford, United States
Amada Service & Sales Specialists. Amada Turret Punch Presses - Press Brakes - Shears. Amada RG-50 Press Brake (1996). Capacity: 55 Tons. Stroke: 3.9″. ... moreFREE Loading onto your truck ! Main Motor: 5 HP.
$
125.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
Removed from running machine.
$
7199.00
Buy It Now
Condition: For parts or not working
Location: Euclid, United States
Model Number: CTB 400. Manufacturer: AMADA. See details below. Larger pallet sizes cost more. (c) Truckload and Partial Truckload: HGR can assist you ... morein setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
$
19500.00
Buy It Now
Condition: Used
Location: Toledo, United States
LENGTH OF STROKE. CAPACITY. . 80 TONS. TABLE LENGTH. . OPEN HEIGHT. . MODEL. . RG-80.
$
29500.00
Buy It Now
Condition: Used
Location: Toledo, United States
MATERIAL FEED INDEX LENGTH. 0.39"-393.69". MATERIAL INDEX STROKE. 15.75". WORK LOAD CAPACITY. . RECTANGLE CUTTING CAPACITY(WxH). 1.18" TO 21". CUTTING ... moreFLUID PUMP MOTOR. 0.25HP.
$
69900.00
Buy It Now
Condition: Used
Location: United States
AMADA HFEM2-1303. LENGTH OF STROKE: 7.8". We buy machinery for cash! We will buy one machine or an entire plant. © 2020 Machinery Resources International. ... moreNew Arrivals. DIE HOLDERS. PUNCH HOLDERS.
$
19.00
Buy It Now
$21.34 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
39.00
Buy It Now
$15.02 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
518.00
Buy It Now
$50.13 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
650.00
Buy It Now
$103.42 Shipping
Condition: Used
Location: Bellport, United States
Removed from running machine.
$
133.00
Buy It Now
$51.51 Shipping
Condition: Used
Location: Louisville, United States
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
$
64.99
Buy It Now
Free Shipping
Condition: Used
Location: Ventura, United States
Model: SP0418. MPN: SP0418. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
$
1150.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
Removed from running machine.
$
1020.00
Buy It Now
Free Shipping
Condition: Used
Location: Bellport, United States
$
425.00
Buy It Now
Free Shipping
Condition: Used
Location: Holtsville, United States
30 tons per ft. Good condition. TOTAL SIZE 19.750.
$
170.00
Buy It Now
Free Shipping
Condition: Used
Location: Holtsville, United States
Amada Brake quick change V Die. 480 -. 330 x 7.895 LENGTH.
$
205.99
Buy It Now
Free Shipping
Condition: New
Location: Sulphur Springs, United States
Amada welded blades. 2 new band saw blades. Length: 20 ft 6 in Thickness.050 in.
$
110.25
Buy It Now
Free Shipping
Condition: Used
Location: Rosedale, United States
They are 146mm in length. We are here to help! Manufacturer:Wilson Tool. Model#:unknown. Local Pick up. 2 = Poor-Fair.
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
RARE Sailor Moon Amada PP 1 Soft Prism Card #45 Mercury (Ami)
This is a rare Sailor Moon Amada Pull-Pack PP1 SOFT prism. 45, featuring Sailor Mercury(Mizuno Ami) Card has been stored in a binder page away from sunlight, in a very low-humidity, smoke-free home, and is in excellent condition. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13ec6640989-0xff-
AMADA MODEL ATF-1332 AUTOMATID SHEAR BLANKING SYSTEM (WILL SHIP)
AMADA MODEL ATF-1332 AUTOMATID SHEAR BLANKING SYSTEM SERIAL NUMBER N/A NEW 1998 GENERAL SPECIFICATIONS: Max. sheet size 51.18" x 98.43" Max. Thickness.126/3.2mm(2) 39.25" x 83" 6000 lb. capacity infeed tables Suction type infeed Shear section Outfeed table with stacker Perpendicular Roll-off Operator control panel f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13ec9d9473e-0xf3-
MOBILE SUIT GUNDAM 08TH MS TEAM SHIRO AMADA ANIME PRODUCTION CEL
Description MOBILE SUIT GUNDAM 08TH MS TEAM SHIRO AMADA ANIME PRODUCTION CEL Condition: Used/ Good CEL AND DOUGA SKETCH STUCK TOGETHER IF YOU WOULD LIKE ME TO FIND ANY CEL. DOUGA, GENGA ITEMS PLEASE SEND ME YOUR LIST OF TITLES. I USUALLY LOOK FOR ITEMS WEEKLY PAYPAL ONLY Quantity, North America/Australia Europe, South America Asia, Other Areas, SAL, SAL, EMS, SAL, EMS, 1 Piece $10.00US, $12.00US, $20.50US, $10.00US, $Please Ask Shipping and Packaging for this Item Is $10.00US for Canada/US/ Australia and $12.00US for Europe(takes 14-28 days) If you have any question please let me know. Payment must be by PayPal. Winning bidder must respond to our email within 3 days following end of auction. Payment must be sent within 7 days. If the payment has not been made within 7 days I reserve the right to cancel the winning bid if these conditions ... moreare not met.
Houdaille-Strippit Cabinet with Punches, Dies for Amada 750 Press INV=9790
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Houdaille-Strippit Cabinet with Punches. Dies for Amada 750 Press. Huge variety of punches and dies, all nicely organized. Shelves are on BOTH sides. Numerous pictures are provided that show all tools inside. I did NOT pick anything from it, you get just like it was at a high end defense sheet metal factory. Enormous amount of tooling. I cannot guarantee that it matches any particular application. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, ... moreI can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned
Amada saw roller table
Up for bid Heavy duty roller table used with amada saw the table is 10 feet long and 22 inches wide it can be adjusted from 18 inches to 24 inches tall it have 10 heavy duty bearing rollers. local pick up. please let me know if more information is needed. thank you
AMADA PUNCH & DIE GRINDER MODEL EG-160ES SHARPERNER
Amada Punch& Die Grinder Model EG-160ES Sharpener Speciation's: Grinding Wheel Cup 7" Dimensions 24" x 36" x 60" Spindle Motor 1 hp 230/460/3 Equipped with: 3 New Wheels Coolant Pump ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3408 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST Shipping Dimensions: 3' x 3' x 3' approx. weight 500 lbs.
Amada CNC Turret Punch PEGA Die Holder: Station A
This is a used Amada PEGA CNC turret punch die holder for 1/2" A station on 56 tool turret) Weight: 1lb. If you have any questions. Please feel free to message us! Fast shipping from North Arlington. NJ(USA)
Dragon Ball GT Carddass Amada Hero Collection Series 3 Prism Silver Foil
Good condition. There is a hidden prism underneath the top layer. Unpeeled. Shipping rate is for continental US only. AK. HI, and international bidders please inquire about shipping. Due to my schedule. I can only go to the post office on Wednesdays. If payments are made later in the week, know that the item will not ship until the following week. Thanks.
Dragon Ball GT Carddass Amada Prism No. 93 98 101 Goku Trunks Pan
Good condition. Set include 3 prisms and 2 stickers. Shipping rate is for continental US only. AK. HI, and international bidders please inquire about shipping. Due to my schedule. I can only go to the post office on Wednesdays. If payments are made later in the week, know that the item will not ship until the following week. Thanks.
DOALL 16' VERTICAL METAL CUTTING BAND SAW MANY EXTRAS AMADA COSEN MARVEL HEM
HERE IS A NICE ONE. THIS IS THE NICEST DOALL VERTICAL BAND SAW WE EVER OWNED! IT HAS MOSTLY CUT PLASTIC AND WOOD. THIS DOALL VERTICAL BAND SAW CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION. PLEASE CALL JIM@ 952-931-79744. THANK YOU. NOTE: THIS DOALL ALSO COMES WITH A VERY RARE DOALL ETCHING TOOL. WHICH CONNECTS TO THE BALDE WELDER. SEE PICS) IT IS ALSO EQUIPPED WITH A DOALL CUSTOM MADE SUPPLY CABINET FILLED WITH MANY NEW AND USED BLADES, SPARE PARTS, SPARE BELTS, AND A BAND FILER BLADE. IT ALSO HAS TWO EXTRA GUIDE HEADS. THIS METAL CUTTING BAND SAW CAN ALSO BE USED AS A BAND FILER FOR ROUGHING OR FILING PARTS. THIS IS TOTAL TURN KEY READY. MAKE: DOALL MODEL: 16-S.F.P SN: 79-581856 TILTING TABLE SIZE: 24" X 24" BLADE LENGTH FOR METAL CUTTING: 122" BAND FILER BLADE LENGTH: 120" BLADE SPEEDS(VARIABLE) 150 TO 5200 FPM ... moreHP: 1 HP ELECTRICS: 220/ 3 PHASE BLADE WELDER MAKE: DOALL MODEL: DWB-12 SN: 81-582146 ELECTRICS: 220/1 PH EQUIPPED WITH: MANY EXTRA BLADES. DRIVE BELTS, SPARE PARTS, BAND FILER BLADE, 2 EXTRA GUIDE HEADS. HANDLING AND PALLETIZING WILL COST $35.00 WHICH WILL BE ADDED TO THE PURCHASE OF THE MACHINE FOR FREIGHT QUOTES. MY ZIP CODE IS 55343. STANDARD SIZE PALLET WEIGHING APPROX 1200 LBS. PRIC E.$3750.00 SOLD AS IS AS INSPECTED. WE WILL LOAD ON YOUR TRUCK FOR FREE!
Hydraulic Metal Shear 3/8" x 10' Promecam 10 ga 1/8" stainless, amada style
For more information; Jack 800 382 8322 or email; jack(at)fmsweb.com 10 FT. X 3/8" PROMECAM HYDRAULIC SHEAR Model no. GH10302 Capacity: 10'2" x 3/8" mild steel Length of knives: 122" D istance between housings: 125" Gap: 8-1/2" Rake angle: 0°10' to 1°40' Holddowns: 11 S.P.M. approx. 14- 54 Floor to top of bed: 33" EQUIPPED WITH: 42" front operated power back gauge with control& readout Electric foot switch Selector switch for on- off- continuous- single stroke Pushbuttons for fine adjustment stroke selector Emergency stop button Blade clearance& rake adjustment stroke selector(1) extra blade Dropped work table with hard chrome plate support rods Ball transfer on top of table Rear parts chute 1 HP 3450 RPM 220/440/60 back gauge motor Hydraulic pump. Driven by 25 HP 1750 ... moreRPM 575/3/60 motor Weight approx. 21.000# Overall dimensions approx. 142" L-R x 97" F-B x 73" H Serial no. 610308148 FOB CHICAGO. IL- $27.500.00 We reserve the right to cancel this listing at anytime as we have dealers promoting this machine. Check Our 100% Feedback! Thanks for looking! turner 3 13kempKEMPER er
Amada 50 ton Hydraulic Straighting/Flatening Forming Model LP2012 Press Brake
Amada 50 ton Hydraulic Straighting/Flatening Forming Model LP2012 Press Brake 1) 50 Ton Capacity 2) 8' Between Uprights 3) 14" Clearance Between Platens 4) 22" wide Bed 5) 220 v 3 ph 6) 15 KVA 7) S.N. 20120080 8) new in 1994 Original machine had two conveyors in and out to advance parts for forming and taking them out to next stations. We don't have the conveyors Dies top and bottom not included in sale. Being sold in a different auction ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3627C BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST Shipping dimensions: 10' x 5' x 8' approx. 15.000 lbs
Sailor moon lot 24 card sailormoon world japan amada all villain
DESCRIPTION: Combine shipping handling. Please wait for total combine invoice! Good. Near mint. Accept Paypal payment. With shipping and handling cost to USA is delivery confirmation of priority mail& insurance. International buyer/bidder. Please message leave a message. Combine shipping handling. For upgrade choice of shipping method such as priority mail, insurance, or register; please let me know. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ef3d61cc2-0xff-
AMADA VIPROS KING 358 FANUC 04-PC
HERE FOR SALE THIS AMADA VIPROS KING 358 1995 FANUC 04-PC 58 STATIONS 4 AUTO-INDEX VERY GOOD CONDITION BUYER TAKE CARE OF SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ef5aa12e3-0x107-
Amada loader table by Southworth Products
This is a southworth product table for auto loader by amada. It is in good working order and was stored for spare parts. But now for sale. It is a ls648 and is 48"x120" and will lift 6000 lbs, also is self propelled and drive is complete.Can be loaded on buyer supplied truck and california taxes if purchased in the state. The weight is approx 2500 lbs.
AMADA APELIO 357 W/ AS848 LOADER COMBO TURRET PUNCH PRESS LASER
This is an Amada Apelio 357 Combo Turret Punch Press Laser. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
AMADA CSH 8" x 8" NOTCHER
This is an Amada CSH 220 Notcher. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
AMADA PEGA 345 CNC TURRET PUNCH PRESS
This is an Amada PEGA 345 CNC Turret Punch. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
AMADA VIPROS 255 w/ LOADER CNC TURRET PUNCH
This is an Amada Vipros 255(w/loader) CNC turret punch. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f04dceeb8-0xf8-
AMADA LCE 655 LASER 1500 WATT LASMAC
This is an Amada LCE 655 Laser(LASMAC) It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
AMADA ASTRO 100M BEND ROBOT
This is an Amada Astro 100M Bend Robot. It is in good working condition. We also have an incomplete parts Astro 100M that we will sell separately for $15k. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
USED AMADA TOOLING PUNCH PRESS DIE (4.937" DIAMETER)
LISTING IS FOR A USED AMADA PUNCH PRESS DIE TOOLING AMADA DIAMETER- 4.937" THICKNESS- 1.109" CONDITION- LIGHTLY USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING ... moreDISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WITHIN THE 7 BUSINESS DAY TIME PERIOD, ITEMS WILL BE RE-LISTED
Wilson precision shear grinding fixture for Amada turret or punch tooling
please scroll down and view all the photos. The title is not a complete description so please read the ad description. You Are Bidding On A Pre-Owned Wilson shear grinder fixture finishing accessory Precision grinding of punch tooling on surface grinders Do precision grinding of your shops Amada turret punch tooling on a surface grinder with this Baby! Description Achieve Professional Grinding Results Q: When we sharpen our large station punches. We sometimes have a problem maintaining the correct shear angle. What do you recommend? A: One of the easiest and most accurate ways to grind the proper shear angle on a punch is to use a shear grinding fixture on a surface grinder. Wilson Tool manufactures a with a built in shear angle scale. Each fixture includes a handy“Table of Shear Angles” chart that helps determine which angle to grind for ... morea known shear depth or which depth with be attained for a known shear angle. To use the shear grinding fixture. You simply load the punch(using the proper adapter) remove the 0 degree stop pin, tilt the holder until the pointer is at the desired angle on the scale, tighten and grind. Using this method, together with the proper grinding wheel and plenty of coolant, you will achieve professional results. Wilson Tool also offers a full line of accessories for the shear grinding fixture. WT IS 85# shipped There is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability
AMADA BOARD- 2 PIECE
Amada 2 PIECE BOARD Part Numbers COO420-PAJDP and COO27A-PADP2 Machinery Exchange is a proud member of the Machinery Dealers National Association. We inspect each piece of equipment thoroughly. Representing its condition with confidence. Your satisfaction is assured with an exclusive MDNA 30-day return privilege. This privilege does not apply to items on consignment or items discounted below the original asking price. Feel free to call us with your questions. We can be reached Monday through Friday 9am to 5pm. 818) 718-6734 INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. I TEM S OLD A S P ICTURED Shipping Shipping is the responsibility ... moreof the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we have to bring in special equipment or call a mover. Note: Most of our listings are marked Freight shipping. We ship via FEDEX and USPS for item(s) 150lbs or lighter. The cost of shipping will be sent via invoice. We encourage all customers to log into the FedEx website to cal
Strippit Amada turret punch tool sharpening punch die grinder cnc machine
BOXED ITEM You Are Bidding on a pre owned this unit grinds Amada turret punch die tooling s/n 115 V, 3 jaw chuck ready to work for you! Buy used and save. Item is ready to use. Any shop or machinist thinking about buying a new unit will love this sweet deal. You will not only make money with this set up but you will save big over a new purchase. A bargain compare to new price. Description info from mfg for reference. P recision sharpening of cnc turret punch press tooling. Examples A mada.Strippit,Weidemann or m ost any punch press tools. MFG Specifications of a new unit for reference only! Strippit Portable Punch and Die Grinder Sharpen all your turret punch tooling with this grinder. 1/4 HP 3450 RPM 115 V 60/1 motor This listing is for the following. Strippit Portable Punch and Die Grinder 3450 RPMS 115v single phase Specifications for ... morereference and not verified. Downfeed graduated.001/DIV feed* uses 5" dia. face grinding wheels. Cash.Checks,money orders Shipping paid by buyer. See calculator or flat rate for price. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees will apply. Domestic handling time Will usually ship within 5 business days of receiving cleared payment. Shipping insurance Optional(based on location and shipping service) Sales tax Seller charges sales tax for items shipped to: IL(8.750% Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Any Flat rate shipping price listed is to the lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All
AMADA PUNCH & DIE SET 1 & 1/4 STATION 201 ROUND +004 113l
| | AMADA PUNCH& DIE SET 1& 1/4 STATION 201 ROUND +004 113l, Click to View Image Album You are bidding on a used but good punch& die set. This was from an Amada CNC turret punch. It is the thick turret style tooling and it is for the 1& 1/4' station. The punch is a.201' round and the die is a +.004' Please use the store search box to find specific sizes. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. Payment, I accept the following forms of payment: PayPal Shipping& Handling, UPS Ground(prices calculated at checkout) Policies, STORE CATEGORIES, PAYMENTS, You may combine items to save on shipping. During checkout. We will apply your shipping discount. SHIPPING, Shipping will be via UPS unless otherwise specified. UPS will send an email ... morecontaining a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer s responsibility to supply us with the correct address prior to paying for the item. Your eBay account must be listed a business name to qualify for shipping discount. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 10 days have past. We ship 3 days a week. This means that your item can take as long as 10 BUSINESS days to receive your item. Inernational items may take longer. POLICIES, All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. If the item is not as descri
#RG-100 AMADA 10' x 110 Ton Up Acting Hydraulic Press Brake (New 1983)
Preowned 122" x 110 Ton AMADA Up Acting Hydraulic Press Brake. Model: RG-100, S/N: 102303(New 1983) Tonnage capacity Maximum bending length Distance between uprights Table length Throat depth Length of stroke Open height Number of cylinders Lower beam speed: rising bending lowering 110 ton 122.1" 100.5" 118.2" 15.76" 3.94" 14.58" 3 2.32 in.sec. 0.39 in.sec. 2.04 in.sec. Equipped With#Auto 99 AMADA CNC control of back gauge Up-acting hydraulic operation Full length foot treadle for actuation of ram Upper and lower die holders 10 H.P. 3/60/230-460 volt hydraulic pump motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 13.600 Lbs. Approximate Floor Space Required: 131" L-R x 64" F-B x 92" H, Condition: Very Good, We Ship Worldwide- F.O.B. Truck. Hauppauge- ... moreLong Island, NY)
#CSH-220 AMADA 8-5/8" x 8-5/8" x 1/4" Hydraulic Power Notcher (New 1985)
Preowned 8-5/8" x 8-5/8" x 1/4" AMADA Hydraulic Notching Machine. Model CSH-220, S/N: 551013(New 1985) Rated tonnage Maximum cutting length Maximum cutting thickness(mild steel) Maximum strokes per minute Ram stroke Oil pressure Oil tank capacity Full load power 23 ton 8-5/8" x 8-5/8" 1/4" 40 7/8" 2.000 p.s.i. 16 gallons 4 kVA Equipped With: Twin work guides the position of which is indicated by a vernier scale. A thumbwheel is provided for fine adjustment. A positive setting pin facilitates rapid setup at 45°. 90°. And 135° to the notching blade. The work guides have an extendable stop for use with smaller parts. Front located operator's control station with a key lock selector switch for Single Cycle/Continuous/Inching mode of operation Adjustable timer from 0 to 10 second delay in Continuous ... moremode Remote electric foot pedal for actuation of ram Scrap chute Electrical control box Manually operated one shot lubrication system 5 H.P. hydraulic pump motor and tank Machine is wired for 3/60/230 volt operation. Approximate Weight: 3.300 Lbs. Approximate Dimensions: 42" L-R x 53" F-B x 67" High, Condition: Excellent, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
#M-3060 AMADA 10' x 1/4" Mechanical Power Squaring Shear '84
Preowned 10' x 1/4" AMADA Mechanical Power Squaring Shear. Model: M-3060, S/N: 3060289(New 1984) Maximum cutting length with side gauge Maximum cutting length without side gauge Maximum plate thickness(mild steel) Blade length Gap depth Rake angle Strokes per minute Back gauge movement range Back gauge speed 118.11" 123.62" 1/4" 133.07" 11.81" 1 degree 28 feet 60 0.39"39.37" 34.25 I.P.M. Equipped With Electro-magnetically actuated mechanical clutch with remote electric foot pedal and dual palm button controls Nine position. Numerically controlled, digitally displayed, motorized and programmable back gauge allowing for automatic selection of cutting width in inch or metric units. 118" Capacity right hand squaring arm with inch and metric scales and disappearing stop(2) Front support arms Four ... moreoperating modes: single stroke. Continuous, automatic and inching Manually adjusted blade clearance and blade height adjustment by turning the table positioning bolts on either end of the shear table Gap frame design T-slots built into shear bed Rear scrap chute(13) Independent hydraulic holddowns(1) Pair 4-edged blades Full length finger guard One shot lubrication system 1/2 H.P. back gauge motor 15 H.P. 3/60/230-460 volt drive motor with electrical controls Machine is wired for 230 volt operation. Approximate Weight: 18.520 Lbs. Approximate Dimensions(Without Squaring Arm) 169" L x 80" W x 69" High, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY) 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f29ece1e8-0xf5-
Amada Aries 245 CNC punching machine
ARIES 245. MAX. 20 TON, TURRET PUNCH TURRET STYLE: THICK AXIS DISTANCE: 36" X 50" MAX WORKABLE SHEET SIZE(W/AUTO REPOSITIONING) 36" X 100" MAX SHEET WEIGHT: 110LB 20 STATION- 2 AUTO-INDEX 9 X 1/2" 6 X 1 1/4" 1 X 2" 2 X 3 1/2" AUTO INDEX 2 X 1 1/4" MAX SHEET THICKNESS: 7 GAUGE MILD STEEL TURRET SPEED: 20 RPM NIBBLING HITS PER MINUTE: 300 SPM MAX HIT RATE: 180 HPM CLUTCH/ BRAKE TYPE: HYDRAULIC BALL TRANSFER TABLE ELECTRICAL: 240/3 PHASE- 440/3 PHASE APPROX. DIMENSIONS: 149" X 104" X 77" WEIGHT 21.500LBS This machine have problem with y-axis servo unit
AMADA RG FBD NC9EX II CONTROL PENDANT CASE
AMADA NC9EX II CONTROL BOX Alternative Parts Inc. Offers Parts& Service For Your Amada& Fanuc Equipment We buy and sell Used Equipment
Amada IBT 610 deburring machine brush sander sheet metal grainer timesaver
Amada IBT 610 deburring machine. sheet metal sander grinder grainer 24 inch wide belt 1999 machine in super condition. comes with assorted brushes shown. Easliy the best condition that can be found.
3 Special Progressive Rib Wilson Tool Punch Form-Up Strippit Thin Turret Amada
3 special progressive rib Wilson Tool form-up punch bodies only(no dies) Wilson Tool# 2348407(key in standard position) Wilson Tool# 2359784(key 45 degrees CW from standard position) Wilson Tool# 2359785(key 45 degrees CCW from standard position) Excellent condition. Appear to be lightly used
Special Wilson Tool Punch Double Bridge Lance Form Strippit Thin Turret Amada
Wilson Tool# 2063027 special double bridge lance and form(form-up) Punch assembly only(no die) Excellent condition Sold as used but it appears to be unused
3 Special Extrusion Wilson Tool Punch Form-Up Strippit Thin Turret Amada 1 ¼”
3 Wilson Tool special extrusion form-up punch and guide assemblies only(no die) Wilson Tool# 2063024 inside diameter measures.232 inches Wilson Tool# 2063025 inside diameter measures.208 inches Wilson Tool# 2063026 inside diameter measures.178 inches Excellent condition Sold as used but they appear to be unused
Wilson Shear Grinding Fixture, Amada/Global/Strippit Turret press, tilt-indexing
NO RESERVE THIS auction for 1-Used: Wilson Shear Grinding Fixture. Amada/Global/Strippit Turret press, tilt-indexing, Wilson Shear Grinding Fixture for Amada. Global or Strippit Turret Punch Press Tooling. Tilts and inexes(4-position, via, locating pin on bottom of the insert flange) good usable condition, comes with 3-inserts(inserts are about 3-3/8" diamiter) a must for sharpening punch press tooling or custom tool making, used condition. Shipping $16 priority. YOU GET WHAT YOU SEE! Postal money orders& company checks always welcome! Local pick-ups are always welcome(no charge) The following is some very informative radio links: http:www.soundwaves2000.com/radio%5Fliberty/ http:www.republicbroadcasting.org/index.php?cmd=listenlive, http:www.gcnlive.com/Listen_Live.html Because you can handle the truth! May be soiled/dings from ... morestorage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described!
Wilson 4-1/2" Station for Amada Turret
Wilson 4-1/2" Station for the Amada Turret. Comes with 3" Square and 3 Dies(008. 012 and.022) 2 sets available 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f3d58f837-0x100-
Sailor moon Sailormoon Amada Pull Pack PP11 Trading Card 1 Envelope Pocket Paper
DESCRIPTION: Very good. Empty envelope, no card inside. Auction is for 1 empty paper pack; if you want to purchase more then 1 pack. Please message me of how many paper that you like to buy. Then I will send you the combine total purchase. Paypal payment only! Combine shipping handling Ship regular first class mail within US and with delivery number. For upgrade choice of shipping method such as priority mail. Insurance, or register; please let me know.
1997 Pocket Monster (Pokemon) Amada Hyper Sticker Lot of 50!
Item(s) for sale are 1997 Pocket Monster(Pokemon) Amada Hyper Sticker series Lot of 50. Out of the 50 stickers. 1 is clear, 4 are rare holographic stickers, and 2 gold stickers as seen in the pictures. The stickers are in good condition. Feel free to email me with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13f3f36cb95-0xfd-
AMADA DRAGONBALL Z CARDDASS PP ALL 12 Prism Card
AMADA DRAGONBALL Z CARDDASS PP ALL 12 Prism Card# AMADA Made in Japan, 12 Prism Card Condition: 95% Photo reference# Shipping# Registered Mail- $ 4 We will let you know the tracking number after shipping# Payment# I accept PAYPAL only! Payments via paypal only. Within 3 Days OF auction end please Seller's other items click it!
Amada RG-50 Press Brake With Dynabend II Back Gauge
Amada RG-50 Press Brake With Dynabend II Back Gauge Just removed from operational service. Serial number 504700 Manufactured in 1983 Capacity 50 Tons Table length 78.8 inches. Max Bending width 82.7 inches Distance Between Uprights 59.9 inches Throat Depth 15.76 inches Length of Stroke 3.94 inches Open Height 74.58 inches Power 460 Volts. 3 Phase, 60 Cycle Overall Dimensions 80L x 55W x 76 inches High Weight 6600 lbs Dynabend II 2 axis Back Gauge(Inv.29062) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have ... morethe right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
AMADA H250SA Horizontal Bandsaw
AMADA Horizontal Bandsaw for sale. Purchased from machine shop auction. Local pickup or will ship USA. At buyer cost(FOB) from item location. Will load for free. Call for details 805-431-4268.
AMADA PEGA 344 Q CNC TURRET PUNCH PRESS - FANUC-P - TOOLING
Used Amada Pega 344-Q press with Func-P control module and all tooling. Without any issues or defects. It is available for testing prior to purchase or ship. ALL DISCONNECTION. LOADING, TRANSPORT, AND INSTALLATION COSTS ARE RESPONSIBILITY OF THE BUYER. Location zip code: 20850 Rockville, Maryland- Washington DC Metro area)
1984 AMADA AMADAN-SS 104 SP-30 29 TON PUNCH PRESS
Please note: This item is being listed for local pick-up/freight only. It is being sold AS-IS. We will help arrange freight or accommodate which ever freight service is requested. We will handle loading the item onto the truck. AMADA SP-30 PUNCH PRESS 230V 3 Phase 60 Hz Motor: 5.5 kW Capacity: 29 ton Stroke Length: 78mm- 3 5/64" Oil Pressure: 180 kg/cm^2- 2560 lb/in^2 Tank Capacity: 72 l- 19 gal Day Light: 290mm- 11 27/64" Net Weight: 1500 kg- 3300 lb Serial No: 305048 Full Load Power: 6 kW Manufactured: 11/1984 NOTE: This unit has been tested and the main motor appears to operate just fine- however. The programmer unit may have some issue and only intermittently operates No dies will be included Please see photos for additional information. Please note: All sales are final and item is sold as-is with no warranty unless otherwise ... morementioned in auction description. All California residents and businesses will be charged CA sales tax. Shipping This item is being listed for freight/local pick-up. We will help arrange freight or accommodate which ever freight service is requested. We will handle loading the item onto the truck. International Bidders: Please contact us prior to placing a bid Payment Details We accept paypal along with any other major credit card. Paypal users must have a verified address to ship to. Cashiers checks. And personal checks will also be accepted. If paying with a company or personal check, item will not be shipped until the check has cleared. Please feel free to contact market maker with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
#RG-250 AMADA 157.5" x 275 Ton Up Acting Hydraulic Press Brake (New 1980)
Preowned 157.5" x 275 Ton AMADA Up Acting Hydraulic Press Brake. Model: RG-250, S/N: 240113(New 1980) Tonnage capacity Maximum bending length Table length Distance between uprights Throat depth Length of stroke Closed height Lower beam speed: approach bend return 275 ton 161.4" 157.5" 122.1" 15.75" 9.8" 11.81" 141.6 I.P.M. 18.6 I.P.M. 94.2 I.P.M. Equipped With Up-acting hydraulic operation#NC-9EXII AMADA CNC control of back gauge and ram Automatic gauge finger height adjustment Full length foot treadle and remote hydraulically actuated foot pedal for actuation of ram Upper and lower die holders Pressure gauge Dual 15 H.P. hydraulic pump motors Machine is wired for 3/60/220 volt operation(low voltage only) Approximate Weight: 37.479 Lbs. Approximate Floor Space Required: 174.8" L-R x 110.2" L-R ... morex 84.5" F-B x 97.3" High(From Floor Level) Condition: Good Working Order, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f7551352e-0xfc-
Amada Airplasma Model IC-200 Plasma Power Supply
Plasma Power Supply came out form a 50 Ton Amada Coma 506072 CNC Turret Punch. Unit is in good condition. Call. Text or email with questions 714 658 5390 We can help with freight and local delivery. Posted with the.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f7a475f32-0xff-
#HFB-100/3 AMADA PROMECAM 10' x 110 Ton Down-Acting Hydraulic Press Brake '97
Preowned 122" x 110 Ton AMADA PROMECAM Down-Acting Hydraulic Press Brake. Model: HFB-100/3. S/N: HFBO 100 30 R970525(New 1997) Maximum tonnage capacity(US tonnage) Maximum bending length Distance between housings Throat depth Stroke length Open height Approach speed Bend speed Return speed Rated ram and back gauge repeatability of a new machine 110 ton 122" 106" 16.5" 7.8" 18.5" 236 I.P.M. 2-23 I.P.M. 2-189 I.P.M. Plus or Minus.0004" Equipped With Flush floor mount. No pit required Linear encoders mounted on independent"C" frames on each end of machine Upper beam guidance by oversized roller bearings Operateur PC based eight-axis CNC control mounted in swing-arm pendant with 12" VGA color monitor. Graphic display, tool library, and 3.5" floppy disc drive Six-axis(X1. X2, R1, R2, Z1, Z2) ... moreCNC back gauge with 27.5" travel CNC control of ram tilt Full complement of quick clamping sectionalized punch holders Two-position remote electric foot switch contained in operator's remote control station Dual(230-460) voltage electrics Machine is wired for 3/60/460 volt operation. Approximate Weight: 14.900 Lbs. Approximate Dimensions: 145" L-R x 86" F-B x 104" High, We Ship Worldwide- F.O.B Truck. Lester(Philadelphia Suburb) PA)
Amada Press Brake FFlattening Die 4" w x 2 1/2" h x 81" long
Amada Press Brake Flattening Die This die came off an Amada Press Brake Model LP2012 ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3627G BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST
Amada Press Brake Forming Die 81" long # 0900-40014 J-6A
Amada Press Brake Forming Die 81" long# 0900-40014 J-6A This die came off an Amada Press Brake Model LP2012 ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3627F BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f8280b88f-0x101-
Roper Whitney Jensen Pexto 18" deepthroat power press Amada strippit tool set up
The title is not a complete description so please read the ad description. please scroll down and view all the photos. Bidders please read the ad. Welcome to an listing by Best Bay Machinery sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following Whitney Jensen 10 Ton Power Punch P ress Model 130 S/N 18 in. deep throat set up to use strippit punch tooling see pictures! Description, Whitmey Jensen 10 Ton Power Punch Press Model 130 S/N 230V 3P set to use Strippit/ Amada tooling specifications from Manufacturer FYI only! SPECIFICATIONS: 10 TON WHITNEY-JENSEN DEEP THROAT PUNCH PRESS RATED CAPACITY. 10 TONS LENGTH OF STROKE. 1-1/4" DEPTH OF THROAT. 18" HEIGHT OF THROAT. 9" STROKES PER MINUTE. 175 ADJUSTMENT OF RAM. 1-3/4" ... moreDIE SPACE.S.D.A.U. 7" DIAMETER OF PUNCH SHANK HOLE IN RAM. 1-9/16" DEPTH OF PUNCH SHANK HOLE IN RAM. 2" BOLSTER PLATE DIMENSIONS. 1" X 12" X 18" SLUG HOLE CLEARANCE. 4" RD OR 3-1/2" X 6" BOLSTER PLATE HOLES- CENTER TO CENTER. 10-1/2" 1 HP 220/440V 3P 1200 RPM Item ships from Chicago 60628 Questions email or call Bob 773-392-5055 Please check our store for the best deals on machinery and tooling at our store! Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration.
#RG-80 AMADA 98.7" x 88 Ton Up Acting Hydraulic Press Brake (New 1995)
Preowned 98.7" x 88 Ton AMADA Up Acting Hydraulic Press Brake. Model: RG-80. S/N: 810686(New 1995) Tonnage capacity Maximum bending length Distance between uprights Table length Throat depth Length of stroke Open height Number of cylinders Lower beam speed: rising bending lowering 88 ton 98.7" 80.8" 94.6" 15.76" 3.94" 14.58" 3 1.78 in.sec. 0.33 in.sec. 2.04 in.sec. Equipped With#NC-9EXII AMADA CNC control of back gauge and ram Automatic gauge finger height adjustment Up-acting hydraulic operation Full length foot treadle for actuation of ram Push button control for downward movement of bed Handheld manual pulse generator for control of back gauge Full complement of sectional upper die clamps(2) Front support arms 7.5 H.P. 3/60/230-460 volt hydraulic pump motor and electrical controls Machine is wired for ... more230 volt operation. Approximate Weight: 11.200 Lbs. Approximate Floor Space Required: 110" L-R x 70" F-B x 90" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
AMADA HA-250 AUTOMATIC HORIZONTAL BANDSAW
AMADA HA-250 AUTOMATIC HORIZONTAL BANDSAW SERIAL#2540055 YEAR 1991 3HP BLADE SIZE.037 X 1" X 11' 6" THIS IS A WELL MAINTAINED GREAT RUNNING SAW! INCLUDED WITH THIS PURCHASE: 1- TOP CLAMPING BUNDLING SYSTEM 3- NEW AMADA BLADES 4/6 PITCH 2- MISC AMADA BLADES 1- NEW PAWL 2- USED PAWLS LOCAL PICKUP ONLY! SORRY NO SHIPPING! LOADING AT OUR DOCK IS AVAILABLE!
#RG-50 AMADA 82" x 55 Ton Up Acting Hydraulic Press Brake (New 1989)
Preowned 82" x 55 Ton AMADA Up-Acting Hydraulic Press Brake. Model: RG-50, S/N: 506973(New 1989) Tonnage capacity Table length Maximum bending length Distance between uprights Throat depth Length of stroke Open height Hydraulic oil reservoir Rising speed Bending speed Lowering speed 55 ton 78.8" 82.1" 59.9" 15.76" 3.94" 14.58" 13.46 gallons 106 I.P.M. 2-19 I.P.M. 82 I.P.M. Equipped With Up-acting hydraulic operation#NC9-EXII two-axis CNC control of back gauge(24" travel) and ram Automatic gauge finger height adjustment(8) WILSON sectional upper die clamps Full length foot treadle for actuation of ram Pressure regulator knob and pressure gauge 5 H.P. 3/60/230-460 volt hydraulic pump motor and electrical controls Machine is wired for 230 volt operation. Approximate Weight: 6.600 Lbs. Approximate Shipping ... moreDimensions: 89" L-R x 57" F-B x 90" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
Amada 826030 Workholder Assembly from Turret Punch
Amada 826030 Workholder Assembly from Amada Turret Punch In good physcial shape.
Dragon Ball Z Amada P. P. Card w/prism cards
Dragon Ball Z Amada P. P. Card w/prism cards* Description* Dragon Ball Z Amada P. P. Card w/prism cards. Made by Amada. There are 9 cards with 2 prism cards. The size of the card is 8.5 cm x 5.9 cm. Payment Method* Paypay Only Payment is due within 7(seven) days after the action end. Shipping Method* This item is shipped by REGISTERED AIRMAIL from Hong Kong. Shipping Cost* FREE SHIPPING
Amada/Toyokoki HYB-85, 8-Axis 85 Ton x 8' Hyd. CNC Press Brake
2000 Toyokoki Model HYB-8525 Hybrid 8-Axis Press Brake(Great Price! 85 Ton x 8' Hybrid Press Brake, ● Hybrid Servo 8-Axis CNC Control ● Pedestal Stop Control ● Stroke Length: 200mm ● Table Length: 2500mm ● Gap Depth: 410mm ● Max RAM Advance Speed: 110 mm/second ● Down Stroke: 48mm ● Power CNC Bed Crowning. Programmable with an Open Height of 13.2” 8” Stroke ● Backstops are Programmable with 100 Steps per each Program with a Max of 100 Programs& External Port for 1.44 Floppy Disc. Machine is sold with no warranty expressed or implied. Buyer is responsible for machine inspection& dismantling prior to shipping. Posted with
Sailor Moon PP Amada Part 1 Rare Prism Card Soft #3 Mars
Up for action is a Sailor Moon PP Amada Part 1 soft prism card#3 Sailor Mars. This card is in near mint to mint condition(maybe some minor scratches and corners might be a little dinged) This card is very rare and hard to find. It has been kept in a smoke free home and in an acid free sheet.It will be mailed in cardboard to prevent damage. I do combine shipping on multiple items.
3 Sailor Moon S Manicure Seal Made in Japan Amada
3 Sailor Moon S Manicure Seal Made in Japan Amada* Description* 3 Sailor Moon S Manicure Seal Made in Japan Amada. The size is 16.5 cm x 8.5 cm. Payment Method* Paypay Only Payment is due within 7(seven) days after the action end. Shipping Method* This item is shipped by REGISTERED AIRMAIL from Hong Kong. Shipping Cost* FREE SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f99b606b5-0x101-
O3 Lot of 430 POKEMON Stickers Seals AMADA Japan
Thank you for visiting TOYZ JAPAN auction booth! We are selling Japanese Toys/ Vintage Toys/ Trading Cards at eBay! 1. Description POKEMON STICKERS Approx 430 stickers(Approx Rare 64 + Normal 370) AMADA Japan We are NOT familiar with POKEMON stickers. So. There is possibility that have MEGA RARE sticker(s) in these set. Do not hesitate to contact us for any additional questions and information! We are dealing only Japanese version Toys/ Trading Cards. Due to our stock control. We cannot allow selling thing separately. 2. Item Condition Condition: USED We are selling the USED merchandise and they have small scratches/ stains and/ or some missing small parts those might be hardly recognized from limited number of photos. We. Therefore, highly suggest our BUYERS to check the photos carefully and to ask us any questions unless you are convinced ... morewith photos before auction/ purchase. Please see above pictures carefully. Our product condition is in normal(good) to excellent condition unless stated; We have removed remarkable damaged stickers. 3. Delivery Delivery Method: SAL with Register" service. This shipment is MOST economical shipping method by Air with Register. Approx 3 weeks– 1 month JAPAN to USA. This service can register/ Maximum 6.000yen insurance service. NOTE: Some of countries(Korea. Taiwan… ect) we cannot send by SAL. Therefore. We will send by Air for these countries. Reference: http:www.post.japanpost.jp/int/service/index_en.html 4. Shipping Cost Shipping Cost( Flat Fee) = US$ 12.0* We can accept several shipping method. Please feel free to contact us! We can ship another shipping method. Please feel free to contact us. We can accept AIR/ EMS/ Over 6.000yen Insurance service. Cost shall be paid by buyer. We will send the item from Japan. We do very careful packing. We accept combine delivery. We can hold the item maximum 7 days) 5. Payment Payment Price = BID PRICE + Shipping Cost(Please check as above shipping cost. Payment by ONL
Super Mario Brothers keshigomu candy vintage amada nintendo japan famicom
vintage book Posted with
AMADA PEGA 304050 30 TON CNC TURRET PUNCH PRESS Must Sell! No Reserve!
aims AMADA PEGA 304050 30 TON CNC TURRET PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST PLEASE BE SURE AND READ ENTIRE AUCTION DESCRIPTION BEFORE BIDDING. MACHINE IS LOCATED AT A FABRICATION FACILITY IN NEWBERG. OREGON( NEAR PORTLAND) AND NOT OUR IRWINDALE, CA. WAREHOUSE. WE ARE LOOKING FOR A QUICK SALE AND REMOVAL. THE WINDOW FOR REMOVAL IS BETWEEN 19TH AND 22ND ONLY. THIS IS A NO RESERVE AUCTION BUT PLEASE BE SURE THE TERMS OF THIS AUCTION CAN BE MET BEFORE BIDDING. Machine just came from a Fabrication shop that had to close its doors. What a great oppurtunity. Yes. Amazingly, this is being offered at $1 starting bid. High bidder wins machine whether its $10 or $100,000! The facility where this is located had to be vacated for the new property owners, thus the need for a ... morequick sale and removal. Take advantage of this situation as you don't get an oppurtunity like this all the time. Machine was being used as shown but the indexing tool motor needs replacement. Was running jobs but they were not using the indexing feature for the two indexable stations. Photos were taken last week when machine was under power. Since then the control has been carefully disconnected to allow removal of other machines in the facility. Please email richard@reliabletools.com with any questions. Machine is being sold as is, where is. Payment needs to recieved after auction closes, next business day is fine and machine needs to picked up between 19th and 22nd of July. Please be prepared to help and make the necessary arrangements to remove machine. There is a local machinery mover that is familiar with the location and the machine. The machinery mover has qouted approx. $3000 to load. Buyer is responsible for loading/ rigging charge and shipping arrangements. You are welcome to use your own preferred mover. Made in Japan By Amada. Model# PEGA-304050. Serial# AK450167 Features: Amada-Fanuc-P System 6M(2) Indexable Tool Stations Auto Sheet Repositioner Pneumatic Punch
AMADA HFT 330 PRESS BRAKE, 330 TONS
AMADA HFT 330 PRESS BRAKE MODEL; HFT 330 YEAR; 1999 LOCATION; OHIO CAPACITY; 330 TONS CONTROL; SIEMENS CONDITION; EXCELLENT BED LENGTH; 14 FEET BEND LENGTH; 160 INCHES PLEASE CONTACT US ABOUT RIGGING SERVICES BEFORE BIDDING Terms and Conditions: All bidders are responsible to determine the age. Description, condition, and authenticity of all Purchased items. This machine has not been tested under power by any of our employees or our company affiliates. Each item is auctioned“AS IS, WHERE IS, with all faults” in its condition at the time of sale, without any warranties or guarantees, either expressed or implied, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, POSSESSION, QUIET ENJOYMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, and without recourse by way of refund, reduction of the Purchase Price, or otherwise. Taxes are applicable ... moreto all purchases unless an exempt form or re-sale certificate is emailed/faxed to us. Shipping and Handling: Bidders are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure its safe delivery. Seller and Buyer have the option to allow the Buyer to choose it's own rigging company for item removal. But Seller has final say to selecting rigging personnel for the item removal. Please send us a message with your zip code to get an estimate quote for transport! If you have your own method of transport. Let us know before payment! We Ship Worldwide!
amada shear blades m-2060
JUST RESHARPENED. READY TO INSTALL. AMADA SHEAR BLADES FOR A M-2060 SHEAR Posted with
90 Sailor Moon Carddass Seal Amada Made in Japan
90 Sailor Moon Carddass Seal Amada Made in Japan* Description* 90 Sailor Moon Carddass Seal. Made in Japan by Amada 2001. There are 15 gold foil seals and 75 regular seals. The size is 5.2 cm x 5.2 cm* Payment Method* Paypay Only Payment is due within 7(seven) days after the action end. Shipping Method* This item is shipped by REGISTERED AIRMAIL from Hong Kong. Shipping Cost* FREE SHIPPING
Amada Sailor Moon magnet change cloth - Sailor Venus
Amada Sailor Moon magnet change cloth- Sailor Venus* Description* Amada Sailor Moon magnet change cloth- Sailor Venus. The size is 23 cm x 16 cm. Made in Japan by Amada. It is unused and unopened. Payment Method* Paypay Only Payment is due within 7(seven) days after the action end. Shipping Method* This item is shipped by REGISTERED AIRMAIL from Hong Kong. Shipping Cost* FREE SHIPPING,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13fbd6ae848-0xf8-
16″ X 11″ AMADA #HK400 SEMI AUTOMATIC HORIZONTAL BAND SAW W/MITER CUTTING
16″ X 11″ AMADA#HK400 SEMI AUTOMATIC HORIZONTAL BAND SAW W/MITER CUTTING NEW 1998. CUTTING CAPACITY. RECTANGULAR— 16″ X 11″ CUTTING CAPACITY. RECTANGULAR, 45 DEG. 8.7″ X 11″ CUTTING CAPACITY. ROUND— 12.6″ CUTTING CAPACITY. ROUND AT 45 DEG. 8.7″ BLADE SIZE— 1-1/4″ X.042″ X 153″ BLADE SPEED— 100 TO 325 FPM TABLE HEIGHT— 29.9″ WORK PIECE WEIGHT. MAX. 880 LBS. SAW BLADE MOTOR— 3 HP A.C. APPROXIMATE MACHINE WEIGHT— 2.000 LBS APPROXIMATE MACHINE DIMENSIONS— 78″LR) X 56″FB) X 73″H) EQUIPPED WITH— HYDRAULIC VISE( FULL STROKE) COOLANT SYSTEM 10′ ROLLER FEED TABLE. NOTE: CAPABLE OF CUTTING TOOL STEEL AND STAINLESS STEEL. PAYMENT PRIOR TO REMOVAL— $17.500.00. SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 Ask for Joe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13fc2bfea3a-0xfb-
Yu-Gi-Oh 1998 Amada Promo Set of 50 MEGA RARE
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Yu-Gi-Oh 1998 Amada Promo Set of 50 Cards MEGA RARE You are purchasing Yu-Gi-Oh 1998 Amada"Trading Collection" 50 cards set. 7 silver holofoil cards are included in this set. No. 4. 8, 46 and 52 are missing. MEGA RARE* These cards are premier Yu-Gi-Oh cards printed by Amada. They are long out of print and extremely hard to find now even in Japan. Please don't miss the chance to get these great cards. Shipping charge: US$6.00 by regular air mail(worldwide. No insurance) US$10.00 by registered air mail(worldwide) Condition: Mint to Near mint Payment: I accept PAYPAL ONLY. Payment must be done within 7days from the closing date of this auction or your bid will be void. CAUTION I strongly recommend you to take insurance option for your valuable items. I will take NO ... moreresponsibility for any postal accident with not insured goods. I can arrange combine shipment for multiple auctions during 7 days period to save shipping. Shipping depends on their total weight. Please notify me if you want to hold payment until the end of my other auctions. If you have any further questions. Feel free to email me. THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fc4c553b0-0xfe-
Magic Knight Rayearth Amada 42 Card + Card Case Japan (LKVA2
Management No. Tracking number can attach for 6usd. Shipping(SAL.AIR) + 6usd. Exhibit is item in a photograph only. There is no item which is not in a photograph. The photograph may come out more neatly than a fact. ★★★★★★★ITEM Condition★★★★★★★ 5【 ★★★★★★★★★★★★★★★★★★★★★ ★★★★★★★★★★★★★★★★★★★★★ Condition- GOOD(7-6-5-4-3-2-1)BAD ★★★★★★★★★★★★★★★★★★★★★ This item is JAPANESE VERSION ★ Please look at the photograph well. Shipping, ①asia ②US.etc(EUROPE) ③South America.Africa SAL(14days~1 month) 4.5usd, 5.5usd, 6usd, AIR(6~10days) 6.5usd, 8usd, 10.5usd, EMS(2~7day) 12usd, 16usd(20usd) 23usd, EMS and AIR in this case please say before pay country's shipping details. Please see below. ■Air(SAL) Service■, ■①asia■, ①India/Pakistan/Indonesia/Palau/Wake/Philippines/Guam/Hong Kong/Singapore/Marshall/Sri Lanka/Malaysia/Thailand/Micronesia/China/Midway/Bangladesh/ ... more■②US.EUROPE.etc■, ②United States of America(USA) Canada/Saint Pierre et Miquelon/U.S. Virgin Islands/Puerto Rico/Mexico, ②Iceland/Serbia/Ireland/Tajikistan/Azerbaijan/Czech Republic/Armenia/ Denmark/Andorra/ Turkmenistan/Italy/ Germany/Ukraine/Norway/Uzbekistan/Hungary/United Kingdom/Vatican City/Estonia/Finland/Austria/France/Netherlands/Belarus/Kazakhstan/Belgium/Kyrgyz/Northern Islands/Greece Poland/Croatia/Portugal/Gleenland/Malta/Georgia/Monaco/San Marino/Moldova/Gibraltar/Montenegro/Switzerland/Latvia/Sweden/Lithuania/Spain/Liechtenstein/ Slovakia/Luxembourg/Slovenia/Russian Federation/ ②Australia/New Zealand/ ②United Arab Emirates/Kuwait/Saudi Arabia/Turkey/Bahrain ■③South America.Africa■, ③Argentina/Colombia/Chile/Brazil/Peru/ Algeria/Egypt/Kenya/Republic of South Africa In EMS. It is divided into four. Please ask. Other items can be bundled.2kg or less) AIR.SAL= No insurance, No tracking number EMS=Full Insurance& Trackable ★ I accept PAYPAL only! ■■■■■■■■■■■■■■■Attention■■■■■■■■■■■■■■■ Regular holiday 12/30~1/4 4/28~5/6 8/11~8/16(Another day exists. Too) The item
AMADA CNC N26 R ER-50 ROBOT CONTROL W/LATCH-OUT ZON CONTROLER NEW 1995
Amada N 26 R ER-50 Robot Control with Latch-out Zon Controller S.N. 2 01161 000 16- 1995 ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3401B BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST
AMADA CNC N26 R ER-50 ROBOT CONTROL NEW 1999
Amada N 26 R ER-50 Robot Control S.N. 1 01161 000 31- 1999 ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3401A BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST
Amada Punch and Dia Grinder No. TEG-160E 4.5"Cap. 6.5" 3-Jaw Coolant (25863)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our Stock Number: 25863. AMADA PUNCH AND DIE GRINDER MODEL: TEG-160E SERIAL NUMBER: IF4845 Year: 1995 GENERAL SPECIFICATIONS Capacity(Tool Size) 4-1/2" Station Maximum Accuracy(Parallelism) 0008" Stone Up/Down Feed Stroke: 4-3/4" Maximum Coolant Tank Capacity: 8 Gallons EQUIPPED WITH 1-1/2 HP Drive Motor. 220/440/60/3 6-1/2" 3-Jaw Chuck Coolant System Approximate Weight: 300 Lbs. F.O.B. Cincinnati. Ohio 4522*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 ... more513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: If we set up shipping item will ship freight collect via FreightQuote.com. Echo Global Logistics, ICCI or any other company we are using at the time. Buyer is welcome to look for a cheaper freight rate and set up shipping with any company they choose. Buyer may also pick up. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item An