In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
232.49
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Model: SCULPFUN S9. Latest Laser Beam Shaping Technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm ... moresharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel.
$
85.49
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
In addition, it can be applied to 95% of the engraving machines on the market such as SCULPFUN, NEJE, Ortur, ATOMSTACK, etc. Model: SCULPFUN Rotary Roller. ... more100% Scale High-precision Engraving: Our roller adopts high friction 70A rubber shaft to prevent slipping, and the linear speed of the rotating surface has been precisely calculated.
$
628.99
Buy It Now
Free Shipping
Condition: New
Location: Rialto, United States
Creality Falcon 2 Laser Engraver 22W Output CNC DIY Laser Engraving Machine 25000mm/min Speed Integrated Air Assist Laser Cutter. Founded in 2014 by four ... more3D printing enthusiasts, Creality is a top global manufacturer of 3D printers.
$
106.99
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
80W Laser Module Fixed focus laser head: suitable for CNC/Laser engraving machine, easy to install. Strong compatibility: Suitable for various types of ... morelaser cutting machines and engraving machines.
$
189.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
[300 300mm Engraving Range] Large carving area, no limit of carving height, so you can carve as you like. Twotrees TTS-55 Pro Laser Engraving Machine ... moreOffline Laser-engraver 300 300mm US. TwoTrees Laser Engraver TTS-55 Features.
$
170.00
7h 17m 45s
0 bids
$396.00 Now
$55.04 Shipping
Condition: Used
Location: Elk Grove, United States
SCULPFUN S9 90W Effect CNC Laser Engraving Cutting Machine 410x420mm Engraver US. Condition is Used. Shipped with USPS Ground Advantage.
$
115.57
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
80W Laser Head With Air Assist 450nm TTL Module for CNC Laser Cutting Engraving. 80W Laser Module Head Kit Laser Head 445nm Engraving Cutting Machine ... more12V. 40W Laser Module 450nm Engraver Laser Head Engraving For Laser Engraver Machine.
$
596.29
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Model: ATOMSTACK S20 PRO. Machine Power: 130W. Super High Power: World's first 20W optical power laser engraver. The laser output power soars up with ... morethe latest generation of four 6W laser coupling technology, is able to cut off 12-15mm thick tungsten board as well as the 8mm thick black acrylic board with only one pass, and even cut the 0.05mm thick stainless steel sheet.
$
239.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Montclair, United States
【Advanced Laser Technology】xTool D1 laser cutter and engraver machine, With 60W Machine Power, 10W Laser Module Output Power. The compressed spot and ... morelaser focus spot makes laser engraver more powerful and precise.
$
109.52
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
80W Laser Module When cutting with this laser head, the air assit system will blow air through the air nozzle. That will bring you excellent cutting experience ... moreand greatly reduce burned marks. With Air-assist: Blowing through the air nozzle, which improves cutting performance and reduces burn marks.
$
248.00
Buy It Now
Free Shipping
Condition: Used
Location: Lake Arrowhead, United States
SCULPFUN S9. Fast focusing design: S9 has the fastest focus design. The S9 laser combines a fixed focus lens and a sliding design. You only need to slide ... morethe laser and tighten the screws to complete the focusing.
$
109.53
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
Laser Wavelength: 445nm±5 (blue viole). Laser Power: 80W. Module Material: Copper. Fixed focal length: After installing the red protective case, place ... morethe acrylic under the red case, fix the laser, and then remove the acrylic, this is the best engraving distance.
$
7.99
Buy It Now
Free Shipping
Condition: New
Location: Lovettsville, United States
I take great care in creating my designs, focusing on both aesthetics and functionality. These digital files make the laser cutting process smooth and ... moreefficient, providing precise and professional results.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Important NOTE: Please do NOT update firmware. Updating firmware may causing irreparable problems. NOTE:If there is any problem after the buyer receives ... morethe product, please contact us and there will be a special person to solve it. Please do not change the parts of the product and use other software to run the machine. This behavior will have a bad effect on the control board!!! Need to install it by yourself! Installation and use need professional knowledge, please make sure you know how to assemble and use before purchase!!! Product Description: This 3000mW DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions.It only need you to connect it to the computer,then you.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
65x50cm Cnc 3000mw Laser Engraving Machine 2 Axis Diy Kit Desktop Engraver 12v. Can Carve the Following Materials:wood, Plastic, Paper, Bamboo, Horns, ... moreLeather, Sponge Paper and so on. This 3000mw Diy Desktop Blue Laser Engraving Machine Is Ideal for Amateur Laser Engraving Usage with Grayscale Printing,Low-light Positioning and Freedom Positioning Functions.it Only Need You to Connect It to the Computer,Then You Can Print Any Pictures Your like with Your Own Creativity.
$
152.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech's heat-radiating CW-3000 water cooler is your best choice! ENERGY-EFFICIENT COOLING : OMTech's CW-3000 water chiller radiates heat away rather ... morethan using refrigeration to keep your k40 laser engraver nice and cool at a fraction of the usual energy expense; its advanced design uses its 2.6 gpm flow rate and powerful fans to radiate away 50W of heat from your machine for every 1°C rise in water temperature.
$
70.67
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
Laser Power: 40W. With the newest technology, the engraving speed of ANNOY TOOLS laser module is faster, and its accuracy is higher. It will unleash your ... moreendless creativity in DIY cutting and engraving.
$
115.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Why Choose VEVOR?. VEVOR Industrial Water Chiller CW-3000 Upgraded 16 L/min CO2 Laser Tube Engraver. VEVOR Industrial Water Chiller Upgraded CW 5000 16 ... moreL/min for Laser Engraver CNC. VEVOR CW5200 Laser Industrial Water Chiller Upgraded 16L/min for CO2 Cutter Tube.
$
699.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Montclair, United States
In addition to software, we have more xTool D1 accessories, which can give your laser engraver and cutter machine more possibilities. (The cutting capacity ... moreis related to the output power of the laser, not to the power of the machine).
$
69.99
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
With air assist, when performing laser cutting operations, the air assist system blows air through the air nozzle to remove dust and debris to improve ... morecutting performance and reduce burn marks, and can also prevent the dust and debris generated during the cutting process from contaminating the optical lens and lens surface, thereby increasing the service life of the lens.
$
253.79
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
✅[Accessories system update] 1. Because it is equipped with the latest OLM-PRO-V10 motherboard, the engraving is smoother and more delicate, the engraving ... moreaccuracy is higher, and the speed is faster.
$
65.00
16h 37m 52s
0 bids
Free Shipping
Condition: New
Location: Hainesport, United States
Laser Power: 40W. With the newest technology, the engraving speed of LUNYEE laser module is faster, and its accuracy is higher. It will unleash your endless ... morecreativity in DIY cutting and engraving. People who receive this present will have a surprise.
$
4.99
Buy It Now
Free Shipping
Condition: New
Location: Lovettsville, United States
Coasters Laser Cut SVG Bundle (40 designs). Plant Stakes SVG Bundle (10 designs). This product is great for Laser Cutting Machines. Just be sure your ... morecutting machine and software are compatible! Christmas Keychain Laser Cut (20 designs).
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
65x50cm Cnc 3000mw Laser Engraving Machine 2 Axis Diy Kit Desktop Engraver 12v Important Note: Please Do Not Update Firmware. Updating Firmware May Causing ... moreIrreparable Problems. Note:if There Is Any Problem After the Buyer Receives the Product, Please Contact Us and There Will Be a Special Person to Solve It. Please Do Not Change the Parts of the Product and Use Other Software to Run the Machine. This Behavior Will Have a Bad Effect on the Control Board!!! Need to Install It by Yourself! Installation and Use Need Professional Knowledge, Please Make Sure You Know How to Assemble and Use Before Purchase!!! Product Description: This 3000mw Diy Desktop Blue Laser Engraving Machine Is Ideal for Amateur Laser Engraving Usage with Grayscale Printing,Low-light Positioning and Fre.
$
18.99
Buy It Now
Free Shipping
Condition: New
Location: Jeannette, United States
We hope you enjoy this product and have success with your projects. Utilization: Designed specifically for laser engraving and sublimation printing. Material: ... moreThese cards are aluminum and created using a specific display anodization process.
$
239.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Model: SCULPFUN S9. Latest Laser Beam Shaping Technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm ... moresharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Name: Diy Desktop Mini Laser Engraving Machine Laser Power:3000mw Laser Head Material:aluminum Aluminum:63cm,68cm,73cm Engraving Area:65x50cm(Maximum) ... moreWorking Voltage:dc 12v Drive Control Board: Advanced Cnc 2-Axis Control Board Control Software: Benbox Software Support Power Can Be Adjusted, Weak Light Positioning.
$
149.00
Buy It Now
Free Shipping
Condition: New
Location: China
Designed for Laser Engraver,CNC Mill, DIY Engraving and Cutting. Effect power output: 80W. 1 80W laser module with magnetic gathering hood & protective ... morelens. - Engravable Materials: MDF, Balsa, Paper, Wood, Fabric, Plastic, Leather, Plywood, Foam Paper, Anodized Aluminum, Stainless Steel, Ceramics, Bone, Coated glass, Black acrylic, Stone, Bamboo, Rubber, Leather, etc.
$
128.00
Buy It Now
Free Shipping
Condition: New
Location: United States
CNC 3018 PRO. If you change the spindle to a module,then also can carve the kraft paper, wood, leather(wallet), bamboo, rubber. Q: What materials can ... morethe milling cutter generally engrave or cut?. 1x 4G USB flash drive include the english user manual & GRBL software.
$
189.58
Buy It Now
Free Shipping
Condition: New
Location: China
1.300 400mm Engraving Range Large carving area: no limit of carving height, so you can carve as you like(foot pad not included, need buy seperatetly). ... more40W Fixed Laser Effect output power: 40W. Electric power: 40W, Actual power: 5.5W~6.5W,Focal length 40mm.
$
321.77
Buy It Now
Free Shipping
Condition: New
Location: Kearny, United States
Laser Power: 80W. --Function:Ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. --100 100 ultra large engraving ... morearea,gantry shape design,no engraving height limitation.
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Spindle PWM speed: Support. Spindle PWM speed : Support;power 0-100% adjustable. 1 x 775 spindle motor. Machinable material: Wood、 plastic、 PCB、 PVC、 ... morecarbon fiber、 acrylic、 density board etc. 775 spindle motor.
$
77.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Olathe, United States
High Efficiency: Ultra-fine compression laser technology, the spot area is as small as 0.02mm², the optical power is 5.5W, the engraving speed is faster, ... moreand the engraving precision is more high. It can engrave stainless steel, ceramics, gaskets and can easily cut 3mm thick wooden boards and 2mm acrylic.
$
499.00
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
● LaserGRBL ( free software ) supports Windows XP, 7, 8, 10,11. ● Effect power of the Laser Module: 80W. ● This laser engraver supports PWM mode. Wear ... moresafety goggles to avoid blindness. ●Latest spot compressed technology, Fast Axis Compressed, can easily engrave ceramics and stainless steel with Ultra-fine laser beam and higher energy density.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
65x50cm Cnc 3000mw Laser Engraving Machine 2 Axis Diy Kit Desktop Engraver 12v. Can Carve the Following Materials:wood, Plastic, Paper, Bamboo, Horns, ... moreLeather, Sponge Paper and so on. This 3000mw Diy Desktop Blue Laser Engraving Machine Is Ideal for Amateur Laser Engraving Usage with Grayscale Printing,Low-light Positioning and Freedom Positioning Functions.it Only Need You to Connect It to the Computer,Then You Can Print Any Pictures Your like with Your Own Creativity.
$
699.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Montclair, United States
In addition to software, we have more xTool D1 accessories, which can give your laser engraver and cutter machine more possibilities. (The cutting capacity ... moreis related to the output power of the laser, not to the power of the machine).
$
149.00
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
Effect power output: 80W. - Designed for Laser Engraver,CNC Mill, DIY Engraving and Cutting. 1 80W laser module with air assist nozzle and lens. - Engravable ... moreMaterials: MDF, Balsa, Paper, Wood, Fabric, Plastic, Leather, Plywood, Foam Paper, Anodized Aluminum, Stainless Steel, Ceramics, Bone, Coated glass, Black acrylic, Stone, Bamboo, Rubber, Leather, etc.
$
227.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
【Touch Screen & Offline Carving】LONGER RAY5 laser engraver has a built-in 3.5” touch screen with a friendly user interface. This allows us to cut multiple ... morepieces of plywood or images to be engraved without tying up your computer to run it.
$
110.00
Buy It Now
Free Shipping
Condition: New
Location: United States
1x 4G USB flash drive include english user manual & GRBL software. Can use carving knife, but also can use laser engraving. Can be engraved plastic, wood, ... moreacrylic, pvc, pcb, wood and the like material.
$
233.70
Buy It Now
$10.00 Shipping
Condition: New
Location: Monroe Township, United States
Product parameters: Voltage 110v 60HZ Input voltage 12V Body material acrylic + aluminum alloy Body size 235mm * 320mm * 375mm Engraving area 100mm * ... more200mm Communication method USB (CH340) Control system GRBL Packing size 40*45*36cm Machine net weight 5kg Operating system WinXP/ Win7/ Win8/ Win10 Support cylinder diameter 15-100mm Carving materials stainless steel, cans, wood, paper tube plastic Packing list: Goggles + power cord + USB + laser.
$
499.00
Buy It Now
Free Shipping
Condition: New
Location: Azusa, United States
Software: NEJE Win Soft, NEJE APP, Lightburn, LaserGRBL. Compatible with: NEJE 3 Max, NEJE 3 Pro, NEJE 2s Max, NEJE 2s Plus, etc. Compatible: all 12V ... moreand 24V NEJE modules. NEJE Software OTA Upgrade: Yes.
$
329.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Model: SCULPFUN S9. In addition, it can be applied to 95% of the engraving machines on the market such as SCULPFUN, NEJE, Ortur, ATOMSTACK, etc. Model: ... moreSCULPFUN Rotary Roller. Latest Laser Beam Shaping Technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Important NOTE: Please do NOT update firmware. Updating firmware may causing irreparable problems. NOTE:If there is any problem after the buyer receives ... morethe product, please contact us and there will be a special person to solve it. Please do not change the parts of the product and use other software to run the machine. This behavior will have a bad effect on the control board!!! Need to install it by yourself! Installation and use need professional knowledge, please make sure you know how to assemble and use before purchase!!! Product Description: This 3000mW DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions.It only need you to connect it to the computer,then you.
$
153.69
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: San Bernardino, United States
Product Model: ATOMSTACK A5 Pro. Laser Power: 40W. 【Integral Screw Rod】: The machine uses an integral screw rod instead of a combined coupling. The laser ... morepower of the fixed-focus laser is more stable than the zoom laser.
$
197.39
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
TwoTrees Laser Engraver TTS-55 Features [300 300mm Engraving Range] Large carving area, no limit of carving height, so you can carve as you like. Input ... morePower:35~40W. Laser Engraver TTS-55. TTS-55 Laser Engraver Complex Efficient Easy To Handle.
$
219.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Whether you are a beginner or an experienced user, this machine provides you with a wide range of choices to unleash your creativity. Fast and Efficient: ... moreThe Longer RAY5 is equipped with the latest 240MHz ESP32 chip, allowing for processing speeds of up to 10,000 mm per minute.
$
249.92
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Model: SCULPFUN S9. Latest Laser Beam Shaping Technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm ... moresharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel.
$
499.00
Buy It Now
Free Shipping
Condition: New
Location: Azusa, United States
High Power Zoom Laser Module: NEJE Max 4 laser cutter and engraver machine is matched with NEJE's classic adjustable A40640 12W zoom module, with focus ... moreof 0.04x0.06mm. A40640 is the most widely used high-power zoom module.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Name: Diy Desktop Mini Laser Engraving Machine Laser Power:3000mw Laser Head Material:aluminum Aluminum:63cm,68cm,73cm Engraving Area:65x50cm(Maximum) ... moreWorking Voltage:dc 12v Drive Control Board: Advanced Cnc 2-Axis Control Board Control Software: Benbox Software Support Power Can Be Adjusted, Weak Light Positioning.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
65x50cm Cnc 3000mw Laser Engraving Machine 2 Axis Diy Kit Desktop Engraver 12v. Can Carve the Following Materials:wood, Plastic, Paper, Bamboo, Horns, ... moreLeather, Sponge Paper and so on. This 3000mw Diy Desktop Blue Laser Engraving Machine Is Ideal for Amateur Laser Engraving Usage with Grayscale Printing,Low-light Positioning and Freedom Positioning Functions.it Only Need You to Connect It to the Computer,Then You Can Print Any Pictures Your like with Your Own Creativity.
$
285.75
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Machine Model: Twotrees TTS-10. Software Compatibility: Twotrees TTS-10 laser are compatible with most engraving software. Machine max Output Power: 80W. ... moreInput Power: 80w (optional). Engraving Mode: Graphic Engraving, File Engraving, Scanning Engraving, Contour Engraving And Pixel Engraving.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Wide compatibility】Comgrow rotary laser engraver is applicable to Laser engraving machine and 3D Priter. We provide the highest quality and comprehensive ... morepre-sales and after-sales service. 【Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”.
$
199.68
Buy It Now
Free Shipping
Condition: New
Location: China
Software: NEJE APP for Android, NEJE Wireless APP for iOS / macOS, NEJE software for windows, Benbox, LaserGRBL with firmware GRBL1.1f. NEJE Max 4 E40 ... moreLaser Engraver laser cutter 10W. NEJE Max 4 E40 Laser Engraver cutter 4 Axis Industrial Laser engraving machine.
$
299.25
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
It uses beam compressed technology to combine 4pcs 5.5W laser diodes into a powerful laser beam with 20W+ laser power. More cost-effective 20W Optical ... morePower Laser Cutting Module. Optical po wer:20W(±1W).
$
77.83
Buy It Now
Free Shipping
Condition: New
Location: China
Pull out the 4-pin wire on X or Y axis stepper motor of Engraver. After connecting the rotary axis, you need to change the step value of the rotary axis. ... moreThe rotating shaft is suitable for most laser engraving machines.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Name: Diy Desktop Mini Laser Engraving Machine Laser Power:3000mw Laser Head Material:aluminum Aluminum:63cm,68cm,73cm Engraving Area:65x50cm(Maximum) ... moreWorking Voltage:dc 12v Drive Control Board: Advanced Cnc 2-Axis Control Board Control Software: Benbox Software Support Power Can Be Adjusted, Weak Light Positioning.
$
279.96
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
Model:65 65CM. 80W Laser---D-B10W. Engraving Accuracy:0.01mm. Laser tube:2xLD+FAC+C-Lens. Laser Power:80W. Laser wavelength:445nm±5nm. Magnetic blower ... moreprotective shell:Constitutes an air duct, has good heat dissipation, and protects eyes and lasers.
$
439.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
With a high energy density of 0.07mm 0.13mm focal spot (10W: 0.06mm 0.06mm), it can achieve speeds of up to 25,000 mm/min without compromising quality. ... moreThis makes it capable of engraving or cutting a wide range of materials, including wood, bamboo, leather, kraft paper, stainless steel, and aluminum.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
65x50cm Cnc 3000mw Laser Engraving Machine 2 Axis Diy Kit Desktop Engraver 12v. Can Carve the Following Materials:wood, Plastic, Paper, Bamboo, Horns, ... moreLeather, Sponge Paper and so on. This 3000mw Diy Desktop Blue Laser Engraving Machine Is Ideal for Amateur Laser Engraving Usage with Grayscale Printing,Low-light Positioning and Freedom Positioning Functions.it Only Need You to Connect It to the Computer,Then You Can Print Any Pictures Your like with Your Own Creativity.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
65x50cm Cnc 3000mw Laser Engraving Machine 2 Axis Diy Kit Desktop Engraver 12v. Can Carve the Following Materials:wood, Plastic, Paper, Bamboo, Horns, ... moreLeather, Sponge Paper and so on. This 3000mw Diy Desktop Blue Laser Engraving Machine Is Ideal for Amateur Laser Engraving Usage with Grayscale Printing,Low-light Positioning and Freedom Positioning Functions.it Only Need You to Connect It to the Computer,Then You Can Print Any Pictures Your like with Your Own Creativity.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Epilog Helix CNC Laser Engraver 24 x 18 75 Watts Model 8000 Class 3R
Auction Wizard 2000 Listing Template- AW2KLOT#2112 This auction is for an Epilog Helix CNC Laser Engraver. This item has been previously used. There are some minor. Typical surface markings to the surface. The interior looks to be in excellent condition. However, the Laser cartridge has been removed and is not included in this sale. Additional Information: 24 x 18; 75 Watts- Model: 8000 Laser System(2007 model year) Class 3R Laser Product- S/N: 8075-0631862418
CNC Laser Tanaka Model LMX V30TF6000B (2003)
Tanaka Model LMX V30TF6000B CNC Laser(2003) Specifications and Equipment Max. Rated Output: 6000 Watt, Effective Cutting Length: 30' Effective Cutting Width: 10' Bed Length: 25'0" Bed Width: 11' Wave Length: 10'6" Power Consumption: 90 KVA, Equipped With: Fanuc 16iL. Rapid Power Pierce, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
1997 Trumpf Model L3030 3000 Watt CNC Laser W Loader In XLNT Condition
1997 TRUMPF TRUMATIC L3030 3000 WATT CNC LASER CUTTING SYSTEM IN GOOD CONDITION WITH SPARES AND AUTO LOADER Our original. Tried and trusted Trumatic L3030 flatbed laser cutting centre continues to amaze with its speed and efficiency. This machine operates according to the'flying optics' principle, whereby the sheet remains stationary and the laser beam is moved across the working area. This workhorse features some state-of-the-art innovation in laser cutting technology. High speed cutting of small components in thin sheets is possible by using a 3.75" lens and nitrogen. Trumpf's Process Control System(PCS) regulates and monitors the piercing process. Thereby yielding enormous time saving as well as improved part quality. Compressed air cutting is an option where part cost is critical. This is achieved by substituting compressed ... moreair for oxygen as the cutting gas. With a small reduction in cut quality. Advanced Process Control(APC) is yet another feature that Trumpf has pioneered: The height of the cutting nozzle is regulated capacitively. Thereby guaranteeing process reliability during cutting and piercing– even on uneven material. Technical Data Max Output 3000 W, Working Area X axis, 3000 mm, Y axis, 1500 mm, Z axis(APC) 115 mm, Max. Workpiece weight 710 kg, Max. Sheet Thickness Mild Steel, 20 mm, Stainless Steel, 15 mm, Aluminium, 10 mm, Max. Positioning Speeds Axis Parallel, 60 m/min, Simultaneous(approx) 85 m/min, Accuracy Smallest Programmable Increment, 0.01 mm, Positioning Accuracy, +/ 0.10 mm, Repeatability, +/ 0.03 mm,
MINT VERY POWERFUL LASER HELIUM NEON 12 VDC CAD CNC LED NM W WATT WATTS LASERS
BIGGEST BADDEST LASER IVE EVER SEEN. ABOUT 2 FEET LONG! SAYS 12 VDC WITH A RED AND BLACK COLOR CODED POWER CONNECTIONS. HOOKED TO 12 VDC AND RED LASER BEAM PROJECTS OUT AND THEN TURNS OFF? EVERY TIME I RECONNECT POWER IT DOES THE SAME THING? 1- 3 SECONDS ON AND THEN OFF. May need more power? YOU WILL GET THE CASE AND THE UNIT. COMPLETE LOOKS MINT! PROBABLY CNC WORK KERNLASERS.COM IS NOT THE MANUFACTURER! AND THEIR LASERS ARE A MINIMUM $99.000 AND WAY UP! THIS MAY BE WORTH ALOT MORE THAN IM ASKING Check out all my stuff and ask for combined shipping to save alot. Basically minus shipping on anything i got. Thank you HERES SOME INFO Helium–neon laser From Wikipedia. The free encyclopedia Jump to: navigation. Search A helium–neon laser or HeNe laser. Is a type of gas laser whose gain medium consists of a mixture of helium and neon inside of ... morea small bore capillary tube, usually excited by a DC electrical discharge. Contents1 History of HeNe laser development2 Construction and operation3 Applications4 See also5 References History of HeNe laser development The first HeNe laser emitted at 1.15 μm in the infrared and was the first gas laser. However a laser that operated at visible wavelengths was much more in demand. And a number of other neon transitions were investigated to identify ones in which a population inversion can be achieved. The 633 nm line was found to have the highest gain in the visible spectrum, making this the wavelength of choice for most HeNe lasers. However other visible as well as infrared lasing wavelengths are possible, and by using mirror coatings with their peak reflectance at these other wavelengths, HeNe lasers could be engineered to employ those transitions; this includes visible lasers appearing red, orange, yellow, and green.1] Lasing transitions are known from over 100 μm in the far infrared to 540 nm in the visible. Since visible transitions at wavelengths other than 633 nm have somewhat lower gain, these lasers generally have lower output powers and are more costl
TRUMPF TRUMATIC L-3030 CNC LASER CUTTER 3000 WATS / AUTO LOADER FULLY EQUIPPED
For Sale! TRUMPF TRUMATIC L-3030 CNC LASER CUTTER 3000 WATS/ AUTO LOADER FULLY EQUIPPED UNIT IS IN EXCELLENT CONDITION/ LAST SERVICE ON 2010 BY TRUMPF TRUSERVICE CERTIFIED. ALL MANUALS AND EXTRA PARTS. LENSES INCLUDED. MANUFACTURED DATE# 1997 Work piece dimensions(max) 3000 x 1500 x 20 mm, Type of Laser TLF 3000 Turbo, Power 3000 W, Type of command CNC Bosch, Longitudinal travel X-axis 3000 mm, Cross travel Y-axis 1500 mm, Hight travel Z-axis 115 mm, Max cuttingthickness in steel 20 mm, Max cuttingthickness in Inox 15 mm, Length L- R 9300 mm, Deph Fw- Bw 2900 mm, Hight 2000 mm, Weight 11500 kg, Shuttle table Yes, Machine can be previewed at our facility. CALL. TEXT OR EMAIL WITH QUESTIONS. We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT ... moreOR EMAIL WITH QUESTIONS. SE HABLA ESPAÑOL. OCMACHINERY AT GMAIL COM 714 658 5390 We can help with freight and local delivery. FREE LOADING IN ALL PURCHASES
3-D Printer, Rapid Prototyping, CNC Laser, Linear Bearings Has 68" of Travel
This is a new old stock carriage(Y-Axis) track from a 54" printing capacity wide format printer made by Epson/Seiko that was never sold It includes the track. And it's carriage exactly as shown. In it's original use. It's carriage was designed to shuttle six large heavy commercial printheads back and forth all day long printing out 54" wide posters on paper(The track's carriage linear travel and overall length are much longer) Overall extruded aluminum track length is just under 80" Carriage length is about 11" or so so total travel is about 68" end to end The extruded track has 4 stainless steel inserts where the carriage's 8 ball bearing wheels ride on it. Although it does not have the rigidity needed for a CNC router/miller.where a cutter head's cutting could set up a high frequency vibration) ... moreit should be very suitable for a large capacity gantry style CNC Laser, or 3-D rapid prototyping printer. Perfect for the do-it-yourselfer Look at the pictures carefully. They should tell you most of what you need to know about this unit. If you have any additional questions you can contact us. IF YOU ARE LOOKING FOR A LONGER TRACK. CONTACT US WE ALSO HAVE ONE WITH ABOUT 80" OF TRAVEL AVAILABLE Shipping; track unit will be boxed up with the carriage removed and boxed separately for safe transport If you live outside of the 48 states USA you must contact us for actual shipping cost before bidding please. We will need to calculate your shipping based on your zip code. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13ea643c35b-0xf6-
Used Prima CNC Laser Cutting Machine with Shuttle Table Model LM1530 2200 Watt
SAVE OVER $100.000 OFF NEW! Building Closure: Priced Thousand's Below Dealer Cost Must Move Now The building this machine is located at is closing and this machine is priced for IMMEDIATE SALE& REMOVAL! NO WARRANTY- SOLD AS-IS Watch A Video Of The Laser Here: http:youtu.be/4KTho0HCCto Used Primach CNC Laser Cutting Machine with Shuttle Table THIS MACHINE IS LOCATED IN ROCK ISLAND. IL and will ship from that location. IT MUST BE MOVED WITHIN 3 DAYS! BUYER IS RESPONSIBLE FOR SHIPPING AND ALL LOADING FEES. Manufacturer: Primach Model: LM1530 Capacity 2200 Watt Includes Dust Collector: Model C24-2K3AD Year: 1996 Primach-L Controller Chiller HCV 15.000-PR-NF Maximum Laser Output: 2.200 Watt Sheet Size: 60" x 120" Travels: 120" x 60" x 5" Sales Tax: contact us prior to purchase for rates(only applies to in-state ... moreCalifornia buyers and local pick-up buyers) Freight will vary based upon delivery area. You must contact us so we can make arrangements and get you a personalized quote on freight. This is a non-returnable item. TBuyer is responsible for INSURANCE with the assigned freight carrier- please read the terms and condition below(subject to change. Please call us if you have any questions before you commit to purchase this item) Because of the high dollar amount of this item. Wire transfer is the preferred method of payment, if you choose to use a credit card it may be subject to an additional fee up to 5% of the purchase price, we also reserve the right to refuse credit cards due to the value of this machine. TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may be offered to the next highest bidder within 4 business days. Any balance not paid in full will result in an unpaid dispute being filed with eBay after 4 business days. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please call us at 626-444-0311 for instructions. Credit Cards Due to fees
CNC Laser, 2500 watt Cincinnati CL-7, 1992
Contact Mark Harris at 773-290-1824 or mark@assetexchangeinc.com with any questions or to receive additional information on this CNC Laser. 2500 watt Cincinnati CL-7 5' x 10' Capacity CNC Laser 25 00 Watts. 120" X 60" Dual Pallet, Flying Optics, GE Fanuc 0M CN C Specifications and Equipment Manufacturer: Cincinnati Inc, Model Number: CL-7, Maximum Output: 2500 Watt, Nominal Wattage: 1700 Watt, Table Working Surface: 2) 5' x 10' Shuttle Tables, Resonator: Rofin-Sinar RS 1700 C02 Laser, Current Electrical Arrangement: 460/3/60, Equipped with: 5' x 10' Dual Pallet. Flying Optics, Ball Screw Drive, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13ec80c0df3-0xf4-
10' X 30' 6000 WATT TANAKA MODEL LMX-V30 TF6000B CNC LASER CUTTING SYSTEM
10' X 30' 6000 WATT TANAKA MODEL LMX-V30 TF6000B CNC LASER CUTTING SYSTEM General Specifications Laser output 6000 watts X-Axis travel 354" Y-Axis travel 120" Z-Axis travel 7.874" Track span 168" Overall track length 504" Cutting capacity(mild steel) 1" Cutting speed rate 40-196 IPM Rapid traverse(X-Axis) 945- 1968 IPM Motor Specifications Not Available Equipped With Fanuc 16IL CNC control T00 B 6000 Watt Laser Power Supply. Fanuc Auto height sensing Orion chiller MACHINE CAN BE INSPECTED UNDERPOWER Serial Number NA Year 2003 Location ON LOCATION
CINCINNATI CL-6 CNC LASER CUTTING MACHINE
1999 CINCINNATI CL-6 CNC LASER CUTTING MACHINE. 5' X 10' Loading table 2000 WATT Serial Number: 51357 EQUIPPED WITH GE FANUC 160I-L CONTROLS. SHUTTLE TABLES, GE FANUC MODEL C200C POWER SUPPLY, KOOLANT KOOLER MODEL HCV-7500-PR-NF-FILT WATER CHILLERS. MACHINE SHOWS 7535 HRS ON THE COUNTER. CUTS UP TO 5/8" MILD STEEL. MACHINE HAS BEEN REGISTERED WITH CINCINNATI. WE HAVE ALL MANUALS AND RECORDS ON THIS MACHINE. WE CAN ARRANGE TRUCKING OR YOU CAN USE YOUR OWN CARRIER. THERE WILL BE RIGGING FEES ASSOCIATED WITH THE SHIPPING OF THIS ITEM IF WE ARE REQUIRED TO LOAD THE MACHINE. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CALL US AT 515-832-5701.
NEAT linear Stage Wafer Inspection XYZ CNC Robitics LASER Ultrapointe KLA Tencor
Normal 0 MicrosoftInternetExplorer4 NEAT: New England Affiliated Technologies 8” Wafer Stage 3 Axis stage with extra piezo actuator on Z This is a complete XYZ stage from Neat which was later bought by Danaher Motion. NEAT 330UP controller is also included with power cord and serial cable. This was originally used in Ultrapointe Wafer inspection machines. It comes with the Neat controller. All cablings, hard copy(if requested at the time of payment) and soft copy of the user’s manual and programming guide. You can either talk to this unit through RS-232 or the limited jog option available on the front panel, also you can attach it to Joystick, I have matching joystick, if you need one please let me know to list it as a separate item. The XY motion is 8.25”x8.25” The resolution for XY are I believe 0.25 micron per step. The Z motion is about ... more0.5” The resolution is 0.1 micron per step. The RS-232 communications is possible either through terminal or any application with RS-232(C. C++, C# Matlab, etc) I can send you a sample Matlab code that I used to generate the videos and you can take it from there. I can also help you through email or phone to get it up and running. It needs 220V to power up as standard. If you would like 110V version. You need to specify at the time of purchase so we re-wire the internal transformer. This item is in great working condition; please see the video below for the actual item. youtube Video1 youtube Video2 youtube Video3 This item will be professionally packed and shipped; the buyer is responsible for shipping charges. Please let me know if you have any questions. We accept all offers that make sense and a whole bunch that don't! Each bid is for 1 of this item. Each item purchased here is one piece less sitting in the landfill Bid with confidence Click here to checkout my other items for nice stuff in motion control. Robotics, CNC, etc TERMS AND CONDITIONS: 1- Payment must be received within 10 days of the end of auction. 2- PAYPAL: We will accept and ship only if the tra
Barer Proteo 5 Axis CNC Milling Machine Lathe Router Robot Laser Haas
This auction is for one Barer Proteo 5 axis CNC machine. Looks like a Fagor control. The screen is missing. I originally bought this unit to retrofit it and use it for making turbine compressor fans. But never got to it. This unit has a high speed spindle, an automatic tool changer of some sort, linear scales. There is a collet chuck built into the table as well. It would be the perfect machine for a small shop or garage with a little work. I haven't done anything with it, but this machine is just begging for a Mach 3 retrofit with a 15 or 17 inch touchscreen. I have the MPG for it. It looks highly accurate. Looking under one of the way covers, it looks like it has linear guide rails on the axis. Feel free to make an offer. This very rare machine sold new for approx. $200.000. USA bidders only. We will not ship outside of the 48 states. ... moreThis machine is sold as-is. Where-is. The shipping estimate above is not accurate, but ebay requires I put something there. This item will have to ship by freight. Estimates weight 1500-2000 lbs. Cashier's check preferred.
USED CNC Rabbit LASER USA ENGRAVER CUTTER 900x600mm 60Watt 36x24
Auction is for 1 machine as shown in the picture. USED Laser System. Refurbished by the Professional Company. Rabbit Laser USA. 60 Watts. Working area of 36x24 inches NEW. 60 Watt Laser Tube NEW. 60 Watt Laser Power Supply NEW. Molybnium Mirrors NEW. ZnSe Focal Lens NEW. Tinted Viewing windows NEW. CW-3000 water chiller all new hoses Comes with rotary attachment for wine bottels. Glasses, baseball bats, etc. Round Stuff. SPECIFICATIONS: Laser-type: CO2 Sealed Glass Laser power: 30W Engraving area: about 24x36 inches Motorized Worktable with about 9 inches of usable height Engraving speed: 0-60.000mm/min Max cutting speed: 0-36.000mm/min Laser output control: 1-100% software setting Location precision: less than 0.01mm Highest scanning precision: 50-1000DPI Working voltage: 110VAC 50-60Hz Operating temperature: 0-45 degree Operating humidity: ... more5- 95% non condensing Minimum shaping character: English 1.0 x 1.0mm Drive System- Micro Step Drive System with Bipolar stepper motors Cooling mode: CW-3000 water-cooling and flow sensor safety system Auxiliary equipments: Exhaust-fans. Air-exhaust pipe, air-assist pump Work surface: Iron honeycomb on the vacuume table Compatible with Windows 2000. XP Home and Pro, Vista, and Windows 7 Compatible Software: TAJIMA. CorelDraw, AutoCAD, Photoshop Controlling Software: LaserCut 5.3 MPC03 PCI card LaserCut 5.3 supports files: BMP. DXF, EPS, BMP, JPG, GIF, HPGL, NC, PLT, DST, and AI Corel and AutoCAD Applet/Drivers included Free Color separation: Uses color property to set function. Speed, and laser power. Machine frame- Welded Steal/ Sheet Steal Key lock for safe maintenance, Examples For more examples. Please visit our web site at the Samples and Examples pages. IS THIS SIZE RIGHT FOR YOU? This laser machine does not come apart. Please make sure that you have WIDE doors. You will need double doors or need to use the garage door. PRODUCT WARRANTY This machine is used and so it does NOT come with a warranty. This machine was traded in for credit in pur
CONTROLLER - CNC Lathe Mill ROUTER PLASMA LASER machine shop MACH 3
CNC CONTROLLER- Lathe- ROUTER- Mill- machine shop SORRY NO INTERNATIONAL Bidders. Please U.S. Canada only. MACH 3 Controller for CNC equipment Lathe. Mill, plasma cutter, Laser 4 Axis capability(Can be upgraded up to 8 Axis with additional adapter PCI card. Most of the installing and programming is done for you. All you need to do is ONE easy step of Calibration. All instructions. Tutorials, etc. included in CD) FULLY functional but has limit of 500 lines of code in DEMO mode. more than enough for most operations) and is freely downloadable. Photo is Generic to show components. Actual components may vary by Brand. INCLUDES: CNC Controller( you will get Either IBM. HP or DELL computer) Windows XP with COA Mach 3 CNC software(pre-installed. freely downloadable fully usable up to 500 lines of G-code w/o License. License available) PC will be ... moreeither IBM. Hewlett Packard or DELL for Reliability Keyboard LCD 17" Display Breakout board(up to 4 Axis) Breakout Interface cable. Power cord to UPGRADE an existing CNC machine or make your own CNC Lathe. Mill, Router, Plasma cutter, etc. This is a USED computer with Freshly reloaded Windows XP pro with COA and MACH3 CNC software installed. we are NOT selling the Mach3 but Pre-installing as a convenience to you. FULL Version freely downloadable in DEMO mode until you decide to buy license. Professional companies are making CNC machines with Mach3 CD includes: Mach3 Software(Demo version) good for 500 lines of code w/o any license. More than enough for most applications. Lazy Cam(G-code converter) Instructional videos. Ebooks, AUTOCAD, other softwares, Unit-converter programs, etc. etc. VECTOR Graphics program· VERICUT· AutoCAD viewer· Raster to Vector Graphics converter(then you can convert Vector to G Code for router or Laser. Etc. Image capable device) some FLASH-version Screens of MACH 3, Pre-made parts TEMPLATES(G-code) which you can modify and save as your own Parts production· other CNC related eBooks· UNIT Converter Sftwre. Calcula
IKO LWLG9 B linear rail with 2 blocks. CNC laser flying optic Epilog style
IKO LWLG9 B linear rail with 2 blocks. Overall length approximately 30.75 inches long. Great condition. Clean rail, moves smoothly be snug. This rail would be perfect for a CNC laser flying optic setup like those seen on Epilog engravers.
Used Preco PRC CNC Laser, 4’x8’ Table, 1000W Laser, Koolant Kooler, New in 2004
Used Preco PRC Laser New in 2004 1000 Watt Laser 50”x100” Bed 12” of Travel on the Z axis Autofocus Windows-Based CNC Control w/ Preco Software Closed Loop Koolant-Kooler Chiller System Currently in Plant and still Under Power Excellent Condition Location: Chicago Video Link below http:youtu.be/3hjQmWFB53I
3,500 WATT CINCINNATI CL-7A CNC LASER
3.500 WAT T CINCINNATI CL-7A CNC LASER NEW 2004 5' X 10' PALLET CHANGER ROFIN MODEL DCO35/20 3.500 WATT RESONATOR KOOLANT KOOLER CHILLER GREENHECK DUST EXTRACTION FAN PC BASED CNC CONTROL FOR FURTHER INFORMATION PLEASE CALL HARVEY GELLER AT 714-968-9985
laser Cutter engraver 40 watt see video CNC table + dell computer
Laser Cutter engraver 40 watt see video CNC table + Dell GX280 Computer=P4 3 GHZ+2 GB RAM+1 TB HDD+XP-3+DVD. Does not include Monitor also has Moshisoft CD Please see the Video The 40w Laser works and the CNC motors function. I cant get the software to work so I am selling it as is with working computer. I bought this new and only put about 15 minutes of laser cutting time on the tube. this item is for Local pickup only. NJ Egg Harbor Township
Renishaw NC4 non-contact laser tool setter CNC Mill breakage -not a probe
This Renishaw system was in good working condition when removed from the machine. Nci-4 interface included. This system has a"air blast" to remove coolant from the laser face. The filter kit is not included in the auction. We pulled this out of the machine due to adding a rotary. We do not have room on the table for the tool setter. Per Renishaw's website- Tool measurement and broken tool detection anywhere along the beam. The NC4 allows fast. Non contact tool setting and tool breakage detection on a variety of machining centres. Available as fixed system and separate system variants, the NC4 incorporates the unique MicroHole™ protection system and the innovative failsafe PassiveSeal™, maintaining IPX8 environmental protection. With all NC4 systems. Precision optics are supplied as standard. These enable the compact series to ... moreachieve unsurpassed performance in a unit particularly suited to small machines and machines where space is at a premium. NC4+ key benefits• Excellent tool to tool accuracy. Suitable for applications using small diameter tools. System features• Compact design Ø30 mm x 35 mm high. Typical repeatability ±0.1 μm 2σ. ✸• Measurement of tools and detection of broken tools Ø0.03 mm and larger. ✸• If the air is switched off. The PassiveSeal™ failsafe sealing device prevents contamination, maintaining IPX8 protection. Stainless steel body– resistant to the hostile machining environment. Proven MicroHole™ technology– no moving parts. Single conduit exit from product– electrical and pneumatic cables enter via single conduit. Measurement of tool length and diameter at normal spindle cutting speeds. Drip rejection mode– rejects signals from random drops of coolant falling through the beam. Up to 5 m separation(separate system only) Modular and compact fixed systems– 95 mm to 300 mm overall length. Other ranges available on request. ✸ dependent on system. Separation and mounting.
Trumpf 1998 Trumatic L2530 CNC Laser Cuttting Machine
1998 Trumpf Trumatic L2530 Laser Cutting Machine. Features include: 2.2kW laser- 1250 x 2500 mm working range- 2 pallet system- TOPS 100 Trumpf programming system- 15mm mild steel capacity- 5 mm stainless steel- 4 mm aluminium- approximately 9000 hrs power on- nitrogen cutting system with regulators- oxygen cutting system with regulators- sheet loading table- sheet metal rack( 4.5m high) with cantelever arm Trumpf Introduces Trumatic L2530 Trumpf Inc. has introduced the Trumatic L2530 flatbed laser that allows for thick and thin sheet metal working in a compact machine which can be easily moved and integrated into an existing shop floor operation. The introduction of the L2530 rounds out Trumpf's full line laser cutting system including the L3030. L4030 and L6030. Like its sister machines. The L2530 laser cutting system takes the inherent ... moreflexibility of a laser one step further and makes the machine structure itself equally versatile by allowing the machine to be configured to match the user's manufacturing requirements and complement the shop floor environment. Designed for ergonomic work processes. The L2530 is fed"longways on. The machine front may be opened over its entire width to facilitate loading and unloading parallel to production and the pallet changer is accessible from three sides. This not only provides greater accessibility to parts, but is among the many design features of the machine. In addition, the machine body consists of a single welded construction; it is designed with a minimal space requirement; it is simple to operate; and has newly integrated features that meet high safety and environmental standards. Despite its small footprint, the L2530 accommodates a full 4 x 8-foot working range. Ideal for cutting a variety of thick and thin materials. The L2530 can be equipped with a choice of four Trumpf TLF turbo lasers ranging from 1500 watts to 3000 watts to suit a myriad of applications. In addition to its flexibility. The L2530 is designed for reliability and low maintenance
****OEM CNC FANUC LASER SERIES OPERATIONAL MANUAL MODEL C1000 C1500 C2000 C3000
UP FOR GRABS is an OEM CNC FANUC LASER SERIES OPERATIONAL MANUAL MODEL C1000 C1500 C2000 C3000. ITEM# B-70014E/ 03. It is about 1/4 inch thick. Great REFERENCE if you have those LASERS specified. PUPLISHED IN JAPAN. I CAN SHIPPING INTERNATIONALLY.
Rare Scary Powerful 800W Diode Laser Array CNC Mill Lathe Milling Router Robot
This auction is for an unusual item. This is a high power laser diode array. We believe it is made by coherent and is 800 watts of output power continuous. OMG! 800 watts! It is cooled by circulated deionized water. Yes. This is perfectly safe and legal for you to own. This is a LOT of laser power. Exercise extreme caution. Do not look at it while operating! A reflected beam may be powerful enough to burn through your safety goggles! You also agree to hold us harmless from any and all damages related to the possession or use of this item. Item is sold as-is. Thank you.
Yaskawa SGDA-08AP Servo Drive CNC Mill Router Lathe Laser Robot Turning Milling
This auction is for one Yaskawa SGDA-08AP servo drive. I believe these take step and direction pulses. Allowing them to be used with Mach 3 and other programs. Thousands new. Pulled from machinery. Posted with
Rofin Sinar CNC Laser Strippit Resonator 1200SM Chiller Control Transformer
For Sale is a Rofin Sinar 1200SM package deal. Comes with Resonator. Chiller, Control, Laser Vac, 480 Transformer, Laser Head, Manuals and Misc. items. A few weeks ago we purchased a Strippit Turret Punch with Laser. We were told it worked when we bought the Strippit. However, we have no use for it and need to sell. MUST PURCHASE THRU EBAY AND USE PAYPAL. NO PERSONAL CHECKS ACCEPTED AT PICKUP. WILL BE SOLD AS IS. NO RETURNS!
LASER FIBER 870cm BURN CNC REPRAP LASER FIBER 3D PRINTER CUTTER
For sale is a LASER-FIBER; Length is 870cm; max. power is 0.3kW@932nm/ 0.5kW@808nm One side is SMA. Other is bare fiber(85mm) The fiber is in pristine condition! SCANHEAD. Q-SWITCH AND OTHER LASER-EQUIPMENT IN MY OTHER AUCTIONS SEE SOME OF MY LASER IN ACTION: 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13fda9d54b9-0x105-
LASER FIBER 250cm BURN CNC REPRAP LASER FIBER 3D PRINTER CUTTER
For sale is a LASER-FIBER; Length is 250cm; max. power is 0.3kW@932nm/ 0.5kW@808nm One side is SMA. Other is bare fiber(85mm) The fiber is in pristine condition! SCANHEAD. Q-SWITCH AND OTHER LASER-EQUIPMENT IN MY OTHER AUCTIONS SEE SOME OF MY LASER IN ACTION:
LASER FIBER 210cm BURN CNC REPRAP LASER FIBER 3D PRINTER CUTTER
For sale is a LASER-FIBER; Length is 210cm; max. power is 0.3kW@932nm/ 0.5kW@808nm One side is SMA. Other is bare fiber(85mm) The fiber is in pristine condition! SCANHEAD. Q-SWITCH AND OTHER LASER-EQUIPMENT IN MY OTHER AUCTIONS SEE SOME OF MY LASER IN ACTION:
Melles Griot,LAB EQUIPMENT LASER MACHINES ALIGN BEAM HOBBY CNC ,05-LHP-131-128
Equipment lase*Power supply Model:707400* We do not have any expertise to do any further testing so we can sell AS-IS Condition. Shipping Information-For the exact shipping cost. Please contact me via e-mail
PicEngrave Pro 4 cad/cam cnc software image to gcode lithophane laser engraving
Image to Gcode Software for CNC Routers Updated to Version 4.2.1- Now Includes Options to Support Engraving with Laser Diodes Program Details Notice: Pre viously registered users can download and install this new version as an update at no charge. PicEngrave Pro 4 +Laser is a simple. Easy to use program that converts images to basic cnc gcode for either spindle or laser engraving. The produced gcode is tested compatible with Mach3. Other controller software may require some editing of the gcode files. PicEngrave Pro 4 +Laser is not an image to vector converter. It will only produce gcode for raster engraving of images. The software runs on the Windows operating system only. And has been tested with WinXP, and Win7. It should work with MS Vista and may work with Win 98SE. But it has not been fully tested with those versions. All Windows versions ... moremust be fully up-to-date with the latest Microsoft Service Packs and.Net Framework. PLEASE NOTE: Before purchasing. Please be sure to download and install the fully functional demo version, and test the gcode to be sure that it is compatible with your version of MS Windows and your cnc operating system. Please do not complete the purchase if you have not tested the demo program. This program is available only as a download- NO installation disks are offered or available. Please work safe. Program Features- Unmatched By Any Other Image-to-Gcode Software Engrave Horizontal- Vertical- 45° Left- 45° Right, 2x Horizontal and Vertical Resolution, Engrave Elliptical Cut-out Shape, Crop Image, Customize Gcode with Pre-codes and Post-codes, Engrave Image Edges, Lithophane Setting, Imperial or Metric, Resize Images, Add Text to Images Adjust Brightness. Contrast, and Gamma Change Axis Assignment Letters(New) Improved Image Centering in Material, Save and Reload All Program Settings, Imbed File Settings in Gcode for Future Reference, Rotate Image, Flip Image, Offset X and Y Start Positions in Material, Adjustable Pixel Resolution, Imports 5 Image Types BMP- JPG- PNG- TIF
40 watt CNC C02 Laser Cutter Engraver from Full Spectrum Laser - NO RESERVE!
Up for auction is an excellent condition 40 watt CNC C02 Laser Cutting Machine from Full Spectrum Laser with NO RESERVE! This unit is in great condition with less than 20 hours of use. I purchased this unit new from Full Spectrum Engineering and have used it for two small robotics projects. This auction includes: 1. 40 watt CNC Laser Cutter 2. RetinaEngrave Daughter Board with micro USB connection. Cable included. 3. Full Version of RetinaEngrave Software 4. Air Pump 5. Water Pump 6. Exhaust Fan 7. Ruler to set height of laser Many more details about this laser can be found at the Full Spectrum Engineering web site. This unit is fairly heavy. I have set the shipping at $45 and I will pay the difference to the lower 48 states. This unit will be packed very. Very well.
Lot of 5 PILZ PNOZ X8P Cnc Plc Mill Lathe Robot Router Mill Laser Turning
This auction is for 5 PILZ PNOZ X8P modules that were removed to change machine over to another PLC system. More modules like this and other types are available in my other auctions. Thank you. Posted with
Pilz PNOZ X3 Cnc Plc Mill Lathe Robot Router Mill Milling Laser Turning Stepper
This auction is for one Pilz PNOZ X3 module that was removed to change machine over to another PLC system. More modules like this and other types are available in my other auctions. Thank you. Posted with
Amada LC657 CNC Laser Cutting Machine 1991 Model Needs New Turbine and Air Lines
1991 Amada LC657 Laser. Currently not operational due to a leaking turbine($15,000) it does also have some air lines that leak and need to be replaced. This unit was operational within the last year. When operational it will cut up to 1/4" low carbon steel. It has an x-axis travel of 72" and y-axis travel of 50" The machine weighs about 25,000 lbs. rigging and transportation planning and charges will be the responsibility of the buyer. This machine also includes a Koolant Koolers chiller in working condition and a small Sullair air dryer also in working condition. Machine is located in Coffeyville. KS.
2008 Bystronic Byspeed 4020-5200 Laser CNC Low Hours 3/4" Capacity
2008 Bystronic Byspeed 4020-5200 Laser CNC Cuts up to 3/4" Steel Machine has Been Serviced By Bystronic Every 6 Months Sheet-W(In. 78.74 in Sheet-L(In. 157.48 in Wattage: 4400 w IPM: 2362 inpm X-Travel: 158.0 in Y-Travel: 79.0 in Z-Travel: 6.7 in Control: Bystronic MMC MACHINE POSITIONING DESIGN FLYING OPTIC LASER RESONATOR BYSTRONIC MAXIMUM LASER CAPACITY 5200 WATT MAXIMUM Y AXIS TRAVEL 80" MAXIMUM X AXIS TRAVEL 160" MAXIMUM Z AXIS TRAVEL 8" NUMBER OF TABLES 2 TYPE OF CNC CONTROL BYSTRONIC RAPID TRAVERSE RATE 6.600 IPM AUTOMATIC SHEET REPOSITIONING NO APPROX. WEIGHT 42.000 LBS Equipped With: Bystronic PC Based CNC Controls. Bystronic 5200 Watt Laser. 6' x 12' Dual Pallet Shuttle Tables. Chiller Unit, 5" 7.5" Non Contact Cutting Head. MACHINE HAS 23.000 POWER ON HOURS. NEW UNUSED BLOWER INCLUDED. Bystronic ... moremanufactures. Markets and services laser cutting systems, waterjet cutting systems. Press brakes, automation and Cad/Cam software. For More Info Please Call Maury Cohn 1 800 888 4312
2000 WATT CINCINNATI CL-7A CNC LASER With 5' X 10' PALLET CHANGER
2.000 WATT CINCINNATI CL-7A CNC LASER NEW 1997 5' X 10' PALLET CHANGER ROFIN MODEL 2000 SMX RESONATOR RENISHAW P14-2 PROBE SYSTEM FANUC 16M CNC CONTROL KOOLANT KOOLER CHILLER FOR FURTHER INFORMATION PLEASE CALL HARVEY GELLER AT 714-968-9985
CNC Laser, Router, Table Fully Enclosed for yag laser or co2 laser Techno-Isel
UP FOR AUCTION CNC Laser system made by VITRO The system was used for engraving large crystal blocks in 3d. The system has a 532nm laser with a Scanlab scan head with 100 mm flat field lens Size: 48"x 84" Cutting/engraving area. All three axis are enclosed ball screws for greater accuracy with internal servo drives. The system powers up and homes but errors out due to a fault condition so being sold as is. The table top is a t slot and is in perfect condition it was always covered with a sheet of mds board. The buy it now price includes the laser system but I can remove the laser and sell the table and controller for $12.000.00. Some of the pannels are removed for access but they are all included with the purchase. The upper enclosed section can easily be removed to make the system an open frame. Shipping rate is an estimate. Sold ... moreas is. I will ship internationaly please email for shipping and crating cost.
Universal X25 CNC Laser Cutter
Excellent condition. Lightly used. Made in the USA. All original parts. Includes: Original manuals. Power cable. Z-axis set piece. Engraver Type: Raster and Vector System Input Power 120 VAC Laser Manufacturer: Synrad Laser Rated Power(watts) 25W Laser Actual Power(watts) Unknown Laser Cooling: Air Engraving field size: 32x18 Engraving Software: Corell
2006 TRUMPF L3050 CNC LASER
Item# 2672 2006 TRUMPF L3050 CNC LASER. Control: Siemens 840D General Specifications: Type of Laser: Flying Optic Max. Sheet Capacity: 1.25″ Alloy Steel Capacity: 0.79″ Aluminum Capacity: 0.47″ Max. Workpiece Weight: 2.000 lbs Travels: X Axis: 118″ Y Axis: 59″ Z Axis: 4.5″ Table Size: 5′ x 10″ Number of Tables: 2 Options: CNC Control 4 Cutting Heads 3″ 5″ 7.5″ 10″ Pierce Control System Autolas Plus Introject Cutting Automatic Pallet Changer Suction/Filtration Unit Positioning Laser Diode Oil Spray Device Timed System Shutdown Lift Master Hours as of 4/30/13: Power On: 38.023 Beam On: 14.505. Location: Call for location. Price: $359.500.00.
Mazak CNC Laser Cutting Machin Super Turbo-X 48 MK II Low Hours Around 2,000 Hrs
Mazak CNC Laser Cutting Machine Age: 2003 Model: Super Turbo-X48 MkII Rated Laser Output. 2500 Watts Maximum Work Piece Size. 49.2" X 98.4" X-Axis Stroke. 105.7" Y-Axis Stroke. 50" Z-Axis Travel. 3.9" Maximum Load Capacity. 1.190 Lbs. EQUIPPED WITH: Mazak L32B CNC Control CO2 Laser Model YB-L250A 2500 Watt Laser Auto Focus Head Automatic Pallet Changer Chiller Total Hours: Around 2.000. SPECIFICATIONS SUBJECT TO VERIFICATION* PLEASE READ OUR CONDITIONS OF SALE BELOW BEFORE PLACING YOUR BID! Payment& Shipping Terms: NOTE: ITEMS THAT SELL OVER $1000.00 OR MORE.WE PREFER HAVING WIRED FUNDS OR PAY BY CERTIFIED CHECKS.We take wire transfers,cashiers checks,personal or business checks.We also take Paypal payments. Personal or business Checks will take 3 to 5 days to clear. We will NOT ship any item sold until money ... moreis received into our bank account and it has cleared.We will have up to 5 business days to ship item once the money is in our account. Because of the amounts of items that we are shipping we will ship out items once a week.If you would like an estimate of shipping, all shipments will be shipped from zip code 90280 and the items estimated weight will be posted in the items description: Actual shipping cost could vary due to Actual weight, once packaged and your invoice will change. Please note shipping charges and packaging are not refundable. Transit times may vary according to shipper. For any question contact me by E-Mail All equipment are sold As Is. Where is. Buyer is respond for shipping cost. We have more equipment for sale If you need any machine. Please give me the opportunity to make a budget, send me a E-Mail
CNC laser turret punch combo
15oo watt laser with marathon punch station comobo. year 2000 new. under power. works great. Business closing Posted with
MAZAK SMART SYSTEM LASER CAM SOFTWARE PROGRAM CNC MACHINE LANGUAGE CONTROL DONGL
New Page 3 Welcome to Simple Easy Auctions. the way it should be. MAZAK SMART SYSTEM LASER CAM SOFTWARE PROGRAM CNC MACHINE LANGUAGE CONTROL* PLEASE MAKE AN OFFER USE THE BLUE"MAKE OFFER" BUTTON ABOVE NO UNREASONABLE OFFER REFUSED! DON'T EVEN WANT TO MENTION HOW EXPENSIVE THIS IS TO BUY WORKS PERFECTLY- GET THE BIGGEST YIELDS AUTOMATICALLY FROM YOUR MACHINE SHOP Pictures Bid with confidence. Read my feedback.upon writing this description we have well over 1200 all-positive feedback comments! QUESTIONS: Please ask any and all questions(and please: feel free to ask anything at all! prior to bidding. Buying, making an offer or buying-it-now, Just click on the user ID: SimpleEasyAuctions under"Seller Information" at the top and follow the steps to submit a question, be sure to include the listing number with your inquiry. ... morePAYMENT: Full payment must be received within 5 business days of the end of the auction. Unless pre-arranged. Please calculate total cost and include shipping charges as indicated. Please include the item number with your payment. I accept payment made via Pay Pal only. LOCAL PICKUP AND/OR DELIVERIES: Local pickup of items is welcome and saves on shipping. Local delivery is also an option, please email for further details. For motor vehicles see policies below) Some items can be delivered for free within a certain range, please make contact if you would like to discuss delivery options. NON-CONTINENTAL USA DESTINATIONS(HAWAII& PUERTO RICO& ALASKA) INTERNATIONAL BIDDERS: Please note that higher shipping charges will be incurred than indicated for any destination other than continental USA. You will have to submit a destination address for a shipping quote or if you are the winning bidder and a grand total will be sent out to you. Please specify if you desire insurance and method of shipping as well as service provider if you have a preference. ABOUT FEEDBACK: Our number one priority is complete customer satisfaction. If you have any questions before or after receiving
LVD Strippit Helius 2513 CNC Laser Cutting Machine 3000 Watt, 1997 23194
in titles& description Name: LVD Strippit Helius 2513 CNC Laser Cutting Machine 3000 Watt. 1997, Ticket# 23194, Model: HELIUS 2513, Size: Table Size: 48X96, Manufacturer: LIEBHERR, Item located at: Tullytown. PA, Year: 1997, Condition: Used, Terms& Condition: As is where is, Description: Make…LVD STRIPPIT Model#HELIUS 2513 Mfr Yr…10/97 Watts…3000 Resonator type…FANUC C3000C Control type/model…GE 16-L Table size…48X96 Auto focus…Yes Total machine hrs…39000 Current blower hrs…N/A Chiller included Keller Dust collector included NEW OPTICS IN THE BEAM PATH OPTICS IN THE RESONATOR CLEANED AND ADJUSTED TURBO OIL CHANGED EVERY 1000 HRS POWER SUPPLY 1 FOR RESONATOR REBUILT Currently in production and has a removal deadline mid-November. Removal is an additional charge | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery ... moreSales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Pair 51" long, 5/8" diameter rails to build CNC router, 3D printer, laser cutter
Two 51" long. 5/8" in diameter rails to build CNC router, 3D printer, laser cutter Taken from surplus industrial equipment. In great conditions. Rails are not indentical. They have diferent brackets, one rail is 1/2 shorter then other, but they should work together nicely. Or they can be cut to the size. Shipping charges: depends from your location and calculated by eBay shipping calculator. Rails are heavy. About 30 lb packaged. We ship to all 50 states and Internationally. Payments: We accept all kinds of payments. Credit cards via PayPal or directly, check. Shipping may be delayed to clear funds. Returns: We understand that it can be hard to buy on-line item without actually see it. Or touch it. So we offering 14 days return policy. If you not completely satisfied please pack item and send it back. We will refund price of the ... morepurchase no questions ask. shipping money not refundable) Feedback: We will happily respond on any positive feedback you choose to post for us. If you find any problems with item or our service please let us know first; please give us opportunity to fix this problem to your complete satisfaction. We are looking forward to serve you at best of our ability! Happy bidding folks!
Lasag Laser Processing Machine LPM302 cutting welding drilling CNC BOBCAD Nd:YAG
Lasag Laser Processing Machine model LPM 302/ mfd. Sept. 1985/ 31597 hours use/ 380V. 3 phase, 60 Hz, 16 KVA/ System is capable of cutting, drilling, material removal, scribing, and engraving metallic or nonmetallic materials. System is also capable of seam or spot welding of metals. The CNC control can be used with up to 4 axes to process work pieces in linear or circular interpolation. System is completely integrated with pulsed Nd:YAG laser and CNC positioning system with enclosure. Some specs. are as follows: YAG laser source: Lasag KLS 321, System is equipped with: CNC control unit NUM 560 mfd. by Telemecanique interfaced with BobCad software. System has XY travel of 220 mm x 370 mm stroke. Z axis of 300 mm and is equipped with CNC rotary chuck. Process can be viewed by monitor/ System includes computer with BobCad interface, manuals, ... morespare parts, etc/ NOTE* We have had the laser pulsing and the CNC tables moving, however not in unison. When we initialize the table, the system closes the shutter and shuts the laser off. It may be an interlock that is not satisfied. Please feel free to contact us for any further information. Equipment is being sold in as-is, where-is condition with no returns. Buyer is responsible for all actual shipping and insurance charges. Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options.
Miyachi LW10 fiber LASER welder welding Setup with Sherline LINUX CNC Rotary XYZ
Up for consideration is a used Miyachi fiber LASER welder CNC welding Setup with Sherline Rotary XYZ. LASER Source. Laser fiber, Sherline CNC XYZ with rotary/ cnc controller LINUX. Note: You will need to provide/setup your own safety enclosure take a look at my other high tech items email any question
CNC LASER TYPE RT7-12
WE TOOK THIS FROM A CNC JUNIOR 60 4Y BUSELLATO YEAR 1998 SELL AS IT WE DON'T HAVE A CHANGE TO TEST BUT WE KNOW THEY WORK IF YOU NEED MORE PCS FROM THE SAME MACHINE LET ME KNOW THANKS FOR LOOKING
New Hermes CNC Laser Engraver - For R/C Plane, Trophy, Haas Shop, Laser Cutter
WOW! 99 NO RESERVE AUCTION! I'm selling my complete ULS/New Heremes Vanguard Laser 2000 System. Buy an quality AMERICAN MADE Machine like this. Not a cheap Chinese machine sold here that will cause huge headaches! The laser is a New Hermes Vanguard Laser 2000. Has low hours on it. It is fully supported by Gravograph USA. It is about 30 watt max output, it easily cuts and engraves acrylic and wood and will mark anodized aluminum. It will also mark steel, and stainless using Thermark or Lasmark compounds(not included) I shot a test panel shown in the photos. Engraving depth is about.03 deep in a piece of scrap plywood, took about 3 minutes to engrave. I also shot a gear in 1/4" crappy plywood, took about 5 passes in about 1 1/2 minutes to cut clean thru. This laser is SUPER easy to use. Works just like a printer! Draw your art in Corel ... moredraw or Solidworks(not included) or other graphics software. Click print and choose your power settings. It send to the laser and then push go on the laser. It literally takes longer to describe than it does to shoot a part. It is very accurate when run in Vector mode from a DXF file. I have used it to laser cut wing ribs and gears for model airplanes and wooden clock parts. The PC is a DELL Vostro 200 running XP. Has a DVD-ROM, 500MB HDD and lots of RAM, Has Microsoft Office installed. Also includes CASMATE engraving software and the dongle. I got that software with the laser, but never used it. Includes manual and drivers installed on the PC. Buyer can have the PC desk with the auction. Or I can dispose of it. I can crate everything for truck freight shipment anywhere in CONUS for $200 additional. I have a freight broker that beats the snot out of freightquote. I would guess $300 so most places in the CONUS. I have a forklift to load onsite. I WILL NOT take Paypal for this auction. If needed you can put it on your credit card thru our merchant services account. But paypal takes to much and holds the money to long to do a bigger sale like this. Please feel free to ask quest
MAZAK Turbo X-48 CNC Laser, 100" x 50" , 1500W, L-1 Control
This is a good used Mazak Turbo x48 1500W 100" X axis 50" Y axis 3.9" Z axis Control Mazak L-l Buyer pays shipping and loading Can load onto truck for $1250.00 weight 17000 pounds 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143b9298fb0-0xe3-
Balliu LC 1500-OG CNC Laser Cutter - Siemens Controller and PRC Laser
Balliu LC 1500-OG CNC Laser Cutter General Info: Stock# BG-141001 Machine Name: Balliu LC 1500-OG CNC Laser Cutter Condition: Used. Good Tested: Yes. Good Working Condition Brand: Balliu Model: LC 1500-OG Serial: N/A Year: 1995 Approximate Weight: 17.000 Lbs. Overall Dimensions: 344" x 94.5" x 97.6" Location: GA Specifications: The Balliu CNC Laser includes the table with pallet changer. PRC 2200 laser, dual circuit koolant chiller, Torit self cleaning exhaust unit, Siemens 840C CNC control and non-contact cutting head. Table/Cutting Area Specs of Balliu CNC Laser 5 x 10 foot table with pallet changer Longitudinal X Travel- 3050 mm Transversal Y Travel- 1525 mm Vertical Z Travel- 150 mm Positioning Accuracy- 03 +/ mm Repeatability- 015 +/ mm Travel Speed- 40m/minute Machining Speed- Up to 15m/minute Cuts up to 3/8" on ... moreCarbon Steel and 7 Gauge on Stainless Admissible Weight- 600 kg Laser Specs of Balliu CNC Laser PRC 2200 Laser Rated Power- 2200w Pulsing- Gatedpulse. Superpulse Gas- HE. N2, CO2 Electrical Specs of Balliu CNC Laser Machine- 460V/60Hz/3ph. 10 KVA Laser- 460V/60Hz/3ph. 25 KVA, 36 AMPs Chiller- 460V/60Hz/3ph. 15 KVA Exhaust- 460V/60Hz/3ph. 15 KVA, 10 AMPs Additional Info: The Balliu CNC Laser is currently under power and is ready to be demoed. The machine is in excellent condition and has been well maintained throughout the life of it. The current owner needs a machine that can run at faster speeds and is therefore looking to upgrade and remove this machine. The machine will be under power until mid May(when new machine is getting installed) Any interested buyers will have to wait until mid May to remove the machine. If you are looking to upgrade to this Balliu CNC laser from one you are currently using visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Carl Davis 404-933-3804 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machiner
CNC ROUTER SL Laser - Type 4002- US - Image Projection Laser
Great projection unit for CNC BRAND NEW IS $ 28.000. Bought in 2005 installed in 2006 used for 3 years bracket included i can crate it- no charge I can ship it at additional cost to be priced out you guys can
Kontron Trumpf Laser Conrtol Unit PLC CNC Computer ASMC2177 FOR PARTS
Up for sale is a Kontron Trumpf Laser Conrtol Unit PLC CNC computer model ASMC2177. This unit is not in the best condition but it should be great for parts! Has some bends and scratches but seems to be all complete. Has black residue( I assume from smoke from something that was next to it at some point) and other clear sticky residue from a label or sticker. I am selling this unit AS-IS UNTESTED for PARTS or REPAIR. If you have any questions please feel free to shoot me an eBay message and I will respond promptly. Thanks for looking. Customer Service is our No 1 Priority We specialize in the resale of new and used goods but we mainly specialize in customer satisfaction over all. We try to do the best we can to make sure that EVERY customer that deals with us has an enjoyable experience and would recommend us for future business. Our feedback ... moreis what we strive to keep 100% positive and we will do most anything to keep our feedback score. Please message me prior to leaving feedback so we can resolve any possible problem personally. If you have any questions or comments on how we can better satisfy your needs please feel free to shoot us an eBay message. We love to hear how your buying experience went and if you would purchase from us again or recommend a friend to! Please refer to our other eBay account for feedback score and customer satisfaction( alldownhill26) Thank you for your business and have a wonderful day! PAYMENTS AND SHIPPING DETAILS We only accept PayPal for payment. We do not accept credit cards or echecks. We do this for the safety of all parties involved to insure easy payment and fast shipping. Next day shipping is available at buyers request. If you have any shipment specifics please inform us at the time of purchase so we can better suit your needs.
Haas CNC Lumonic Laser Welder
HAAS Laser Welder- GSI Lumonics Laser Welder 40' x 16' 4 Axis Welder. Wirefeed included.
Vmc CNC Laser deposition Router 3D Printer Welding Plasma Automation Mach EMC2
This sale is for a 3 axis CNC in excellent mechanical condition. This unit would be perfect for anyone wanting to build a custom machine requiring three axis precision movement. Such as laser deposition, welder, plasma, router, 3-D printer, etc, etc. Machine travels are as Follows: X 30" Y 20" Z 20" Machine started life as a Tree VMC 750. It utilizes high precision ballscrews as well as linear ball ways, So not only is it capable of high precision positioning but it is also easily capable of high-speed movement. This is a low hour one owner machine, that Is ready for its new owner to install their own custom system, Servo motors, control, spindle, and spindle motor have all been removed. The machine still retains the lubrication system, electrical cabinet and all limits switches. If you have any questions about this machine ... moreplease feel free to call or text me at 573-578-9890. We would be happy to load onto buyers transport free of charge. We estimate shipping to be between$ 400 and $800 depending on your location within the continental Us Posted with
2000 BYSTRONIC "BYSPRINT" CO2 CNC Laser 48" x 120" (Metalworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE FOR ACCURATE FREIGHT& CRATE CHARGES Bystronic BTL CO2 Laser CNC Model: BTL 3500 Year: 2000 Condition: Excellent Rating: 3) Used/Tested Replacement Cost: $ 600.000.00 Technical Specifications: 2000 BYSTRONIC"BYSPRINT" 3012. 3,500 Watt Laser 440V. 60CY, 3PH 48" X 120" Sheet Size Aitomatic Pallet Table Shuttle Koolant Kool Chiller Torit Donaldson Dust Collector BYSTRONIC CNC Control. Recently Serviced Resonator) General Hoist 1-Ton Ccapacity Crane w/ CM Valustar Hoist 48'x120 Cutting Table with copper grids and automatic shuttle system. 6.7" Z-Axis travel with mechanical height sensor. 3.500 Watt machine. Depth of cut: Mild steel 1.0" stainless.750" aluminum.500" Non-contact cutting heads with flying optics and Back Reflector Isolator. Includes 5" 7.5" ... morecutting heads. Machine also has Cross Jet Nozzle and automatic nozzle cleaning. BYSTRONIC CNC Control with multiprocessing/multitasking technology. Operational features include: Automatic sheet metal edge detector; Piercing on the fly; Machine Comes with Chiller/dust/vapor collector/Air Dryer/Material Lifting Hoist Machine packed by Certified BYSTRONIC Technician. Certificate is included. All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable
CNC CONTROLLER Lathe - Router - Mill - Mach 3 - Laser - Plasma Cutter Oxy Gears
CNC Controller Hewlett Packard IBM or Dell Computer for Reliability MACH 3 Controller for CNC equipment Lathe. Mill, plasma cutter, Laser 4 Axis capability(Can be upgraded up to 8 Axis with additional adapter PCI card. Most of the installing and programming is done for you. All you need to do is ONE easy step of Calibration specific to your machine. All instructions. Tutorials, etc. included in CD) FULLY functional but has limit of 500 lines of code in DEMO mode. more than enough for most operations) and is freely downloadable. Photo is Generic to show components. Actual components may vary by Brand. INCLUDES: CNC Controller(you will get Either IBM. HP or DELL computer) Windows XP with COA· Mach 3 CNC software(pre-installed. freely downloadable fully usable up to 500 lines of G-code w/o License. License available) PC will be either IBM. ... moreHewlett Packard or DELL for Reliability· Breakout board(up to 4 Axis) Breakout Interface cable. Power cord· CD Instructional. Videos, programs, templates, CAD-CAM ebooks, manuals, etc. etc. This is the CNC Controller Unit only. For economy; use your own screen. Keyboard, mouse. to UPGRADE an existing CNC machine or make your own CNC Lathe. Mill, Router, Plasma cutter, etc. This is a USED computer with Freshly reloaded Windows XP pro with COA and MACH3 CNC software installed. we are NOT selling the Mach3 but Pre-installing as a convenience to you. FULL Version freely downloadable in DEMO mode until you decide to buy license. Professional companies are making CNC machines with Mach3 CD includes: Mach3 Software(Demo version) good for 500 lines of code w/o any license. More than enough for most applications. Lazy Cam(G-code converter) Instructional videos. Ebooks, AUTOCAD, other softwares, Unit-converter programs, etc. etc. VECTOR Graphics program· VERICUT· AutoCAD viewer· Raster to Vector Graphics converter(then you can convert Vector to G Code for router or Laser. Etc. Image capable device) some FLASH-version Screens of MACH 3, Pre-made par
VYTEK REBEL 2 (DUAL OR SINGLE HEAD) CNC LASER / ROUTER GANTRY
THIS IS A USED VYTEK REBEL TWO GANTRY WITH A 4' X 8' + BED AS WELL AS HARDWARE(PENDANT" P.S. ETC. SHOWN IN PHOTOS) IT WAS ORIGINALLY SET UP WITH TWO. 5O WATT SYNRAD LASERS(WHICH HAVE BEEN REMOVED) BUT CAN ALSO BE SET UP AS A SINGLE HEAD LASER/ ROUTER AS WELL. NOTE: ALL LINEAR TRAVEL IS SEALED AND RUST FREE. PLEASE FEEL FREE TO E-MAIL ME ANY QUESTIONS! PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM SHIPS AS FREIGHT. BUYER PAYS ACTUAL SHIPPING. OTHERWISE, ON SITE BUYER/ PICK UP CAN BE ARRANGED. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, BANK TO BANK WIRE TRANSFER. OTHERWISE. ANYWHERE OUTSIDE THE 50 STATES: BANK TO BANK WIRE ... moreTRANSFER ONLY. THIS ITEM IS SUBJECT TO WALK IN SALE*
Monode Etching power supply - Photo-etching, CNC, Laser Marking, Model R/C
Monode Etching power supply. Used for photoetching. Plating, marking, etc. Lists for over a grand! Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1448c8861aa-0x100-
Inter-Lakes Machine Base Welding Table Laser CNC XYZ 4'x6'
UP FOR AUCTION Inter-Lakes Base Machine Base slight amount of rust on the top 1" thick machined top 4'x6' overall top area 4'x3'10" x 39 1/2" tall lower area 4'x2'2" x 30 1/2" tall very heavy 1000-1500lbs Shipping Price is an estimate email for shipping quote.
NETBOOK CNC CONTROLLER * MACH 3 LATHE MILL ROUTER PLASMA LASER CUTTER
This is a refurbished MSN Wind Net book U100 with a 1.6ghz processer. 2gb memory, and 160gb HD running windows XP. It comes with a licensed version of Mach3, licensed version of PEP425K(a very high definition picture to gcode software) and several other picture/text to gcode softwares. The net book comes with charger, manuals, and recovery disk. This unit comes with the USB Smoothstepper software and drivers already configured in the computer and mach3. Mach3 is configured to gecko G540. I've put a file with all the manuals for mach3 on the desk top with the mach3 backup license file as well. This saves you about $100 for a similar set up. USA buyers only. Thanks for looking.
Kontron Trumpf Laser Control Unit PLC CNC computer ASMC2177
This Unit is in Great condition. Unit was used in a Trumpf Laser that had an upgrade. This unit was not compatible with the upgrade so it was gently removed from the system for resale. Unit is in Great cosmetic and Working Condition. Guaranteed Not to be DOA. Feel Free to ask Any Questions Through Ebay. PayPal for Payment. Thanks for looking. Make an offer. Input = 230 V 3.15 AT Kontron Laser Control Unit Type& Revision ASMC2177 lX1008 REV:10 Identification# 30526 Trumpf ID# 0367833 Trumpf Card List Cp6500-v TASC-MFB TASC-HF NOTE FOR RETURNS: Your item is GUARANTEED not to be D.O.A. All serial numbers have been recorded for both buyer and seller protection and must match upon return before a PayPal refund is issued. BUYER is responsible for all shipping costs.
CNC Laser Welder Workstation Areotech Stages and DR 500 Control XYZ
UP FOR AUCTION 2001 Model CNC Laser Welder Work station Includes beam delivery and through the lens viewing. Cross Hair Generator Areotech XY Stages with 12 inches travel Z Stage has about 6" or 7" The xy Stages home and can be re-positioned with the software Z stage must be bypassed so the z is moved with a hand crank The bellows are not in good shape but the stages seem tight Includes a windows 98 Computer with Areotech Software to control the stages and process flat screen monitor. Keyboard and mouse Runs on 120 volt single phase NO LASER IS INCLUDED IN THIS SALE Shipping Listed is an estimate email us for actual shipping cost to your location
Control system laser marking machine Excel 75 watts cnc
Excel laser marking system. 75 watts 3" capacity comes with chiller( I will photo later) aprox 1992 for age came from a plant closure and looks to be in good condition. We are open 9am to 5.30 pm mon-friday. 727-417-0172 you can pay by check or direct bank wire transfer and this are the only 2 ways to pay. YOU MUST READ THIS BEFORE BUYING!
1999 MAKINO CNC VERTICAL MACHINING CENTER - 20,000 RPM - FANUC - LASER SYSTEM
MAKINO#SNC64G/S CNC HIGH SPEED VERTICAL MACHINING CENTER Model# SNC64G/S/ Year: 1999/ Great Condition TABLE SIZE- 15.7" X 29.5" TRAVEL- X AXIS) 23.6" TRAVEL- Y AXIS) 15.7" TRAVEL- Z AXIS) 15.7" SPINDLE TO TABLE- 9.8" TO 25.5" SPINDLE SPEEDS- 300 TO 20.000 RPM SPINDLE TAPER- CAT 40 RAPID TRAVERSE RATE- 1100 IPM MAXIMUM WORKPIECE WEIGHT- 551 LBS. SPINDLE DRIVE MOTOR- CONTINUOUS/30 MIN. 20/15 HP APPROXIMATE MACHINE WEIGHT- 13.228 LBS APPROXIMATE MACHINE DIMENSIONS- 93"LR) X 154"FB) X 100"H) EQUIPPED WITH- MAKINO PROA( FANUC 160iMA) CNC CONTROL 15 POSITION TOOL CHANGER OIL CHILLER HOUR METER BLUM LASER SYSTEM FOR TOOL SETTING& TOOL BREAKAGE MONITORING. TYPE P87.0634. HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
Laser System for CNC Turret Punch, Application Engineering, Rofin-Sinar
Components for a Laser System for CNC Turret Punch Components for a Laser System for CNC Turret Punch Application Engineering Corp. Rofin-Sinar These are components from a laser system that was on a CNC Strippet Turret Punch. They have to keep the laser because it's tied in with the machine controls. These photos were taken when I transported the units from the plant to my warehouse. They are stored inside the building) Located in Bridgeport. CT 06607 Feel free to inspect Free loading onto flat bed or trailer(not recommended to be shipped in a closed van type truck as these units are top heavy and need to be strapped down)
Synrad J48-5SW laser cutting etching engraving cnc
I recently went through a divorce and need to find money for a new place to live for my son and I. I bought this laser for $4200.00 just a couple years ago and never managed to build the machine to mount it on. So everything in the paperwork pictures is from the last time this laser was powered up at the time of purchase. I am selling this laser at a very low price with anticipation of getting money fast. thank you for considering my ad.
Cincinnati Cnc Laser Center
Up for sale is a used Cincinnati laser. It features a rofin resonator which is 2.5 kw(2500 watts) It is capable of cutting up to.5 inch(12.7mm) mild steel, 25 inch Stainless Steel(6.35mm) 1875 inch(4.76 mm) aluminum. This was disconnected in January of 2014, It was in working condition when it was disconnected, Please see the photos in this ad, feel free to contact me if you have any questions. We updated the cutting head to a brand new Saturn III head approximately 3 months before disconnecting the machine which is a $8000.00 update. Machine also comes with Cincinnati nesting software that is up to date and also has a value of $2000.00. Please see picture for machine hours. Rigging of this machine will be done at no charge. Shipping costs is not included in the selling price, it is the buyers responsibility to get a shipping quote. Posted ... morewith eBay Mobile
HP 9000 Printer 89" LINEAR BEARING SLIDE+Motor 3-D printer, X-Y Table, CNC Laser
This is the 89" long linear ways from a HP Designjet 9000 wide format printer It has about 77 to 78" of travel It is complete with the 11" long carriage plus the reduction gear drive motor and drive belt It is designed to shuttle six heavy printheads that weigh all together over 5 lbs. all day long at high speed from one end to the other with exacting precision It has hardened stainless steel inserts in the extruded aluminum track/ways that is traversed by the eight ball bearing carriage If shipped rather than local pick up. We will remove the motor assembly, belt drive and carriage from the track and ship them separately with evrything well packed in two boxes If you are designing a 3-D printer or a CNC laser and need over six feet of travel. This might be a solution for you. If you need just the track and carriage without ... morethe drive motor and it's belt reduction gears? Contact us and we can separate them and off er a lower price. We also have another similar 89" long track available that is still mounted on it;s HP Designjet 8000 printer framework that could save a lot of fabrication time. Contact us if you are interested in that one and we can e-mail you more info about it.
Monode Deep Etching power supply - Photo-etching, CNC, Laser Marking, Model R/C
Monode Deep Etching power supply. Used for photoetching. Plating, marking, etc. Item works.
COHERENT DIAMOND G-100 CO2 LASER, CNC, LASER CUTTER
HARD TO FIND SEALED CO2 LASER HEAD Liquid-Cooled. RF-Excited OEM Industrial CO2 Laser. Features• Wide operating power range• Pulse frequency from single shot to 100 kHz• Fast rise-and-fall time• Excellent power stability• Integrated RF power supply• Compact design We are unable to test this laser head. We do not know the operational status. It is being sold as is. Final sale. Specifications from manufactures data sheet: System Specifications Output Power 100Watts Power Range(W) 10 to 100 Pulse Frequency(kHz) 0 to 100 Peak Effective Power(W) 250 Pulse Energy Range(mJ) 5 to 200 Pulse Rise& Fall Time(μsec) Power Stability2( ±10 Beam-Pointing Stability(μrad) Beam Ellipticity Beam Diameter(1/e2)mm) 2.3 ±0.4 Beam Divergence4(Full-Angle)mrad) Wavelength5(μm) 10.2 to 10.7 Polarization(Parallel to Narrow) Linear 100:1 DC Input Voltage(VDC) ... more48VDC ±1% Max. DC Current(A) 50 rms. 100 peak CoolingWater Flow Rate 1.5 gal/min. 5.7 l/min. CoolingWater Temperature Range 10 to 35°C(50 to 95°F) Water Pressure 30 to 75 psi. 205 to 520 kPa Ambient Temperature 5 to 40°C(41 to 104°F) Relative Humidity Check our other auctions for more interesting and esoteric items. We have been in business for 18 years. Our expert staff is available to answer any questions you may have. RESOURCES UN-LTD. ELECTRONICS. SURVEILLANCE, OPTICS. MOTION CONTROL Check out my other items! Powered by The free listing tool. List your items fast and easy and manage your active items.
ACCES IO D/A-06 - 6 CH. ANALOG 12-BIT DAC ISA (cnc, laser, dpss, galvo, argon,)
D/A-06A ISA Bus Six Channel Analog Output ISA Card. Drivers& users manual(hard copy + digital pdf) Features Six independent analog outputs 12-Bit resolution Voltage Output Ranges: 0-5V. 0-10V, ±2.5V, ±5V, ±10V Current Output Ranges: 0-20mA. 4-20mA, 0-50mA and 10-50mA optional) Individual range selection per channel Three update modes including simultaneous update Additional 24-bit parallel digital input/output port ISA card Model D/A-06A can be installed in I/O slots of PC/ XT/AT class computers. It economically provides six independent 12-bit Digital-to-Analog Converters(DAC) and 24 digital input/output channels. Each DAC has double-buffered input for single step update and occupies a unique address location. Analog Output Update Mode is selected by a selector switch on this card. Three update modes are available: Individual ... moreupdate of each channel. Simultaneous update of all selected channels. Simultaneous update of all selected channels upon receipt of an external signal. Note: This mode requires use of six digital I/O lines on Port C. Digital I/O channels are provided from a type 8255 Programmable Peripheral Interface(PPI) The PPI has 24 I/O bits which may be programmed in three modes of operation: Mode 0: Each group of 8 I/O bits may be setup to be input or output. Mode 1: Each group may be setup to have eight lines of input or output. Note: in this mode. Three lines are used for handshaking and interrupt-control signals. Mode 2: Eight lines are used for bidirectional bus and five lines are used for handshaking. Base address selection is via on-card DIP switches and the D/A-06A requires 16 consecutive I/O address locations. The base address can be selected anywhere within the I/O address range of 000-3FF(hex) providing that the address locations do not overlap other functions. Data are written to the DAC's in right-justified 2-byte binary format(8 LSB's and 4 MSB's) For example: Unipolar Ranges: 0000 0000 0000 = Zero 1000 0000 0000 = ½ Scale 1111 1111 1111 = Full Scale Bipo
HITEMA WATER ANTIFREEZE CHILLER COMPRESSED CNC ROUTER SPINDLE PLASMA LASER
NO RESERVE Hi. thanks for stopping by! Please NO International Shipping or International bidding. You are buy ONE USED Buyer is responsible for all shipping charges from our SANDY. UT location. LOCAL PICKUP IS FREE. Please look at pictured before bidding. Utah Buyer pay sale taxes 6.85% Shipping included tracking number and insured mail. Paypal only please. Please take a look at the actual picture. This item is being sold AS-IS. There are no guarantees or warranties; it cannot be returned for any reason. We are not liable for incidental or consequential damages or claims. Payment Options: PayPal(confirmed. Physical, US address) This Listing Is AS IS and Will Be Final Sale NO RETURN is accepted. So please bid accordingly See My other items Good luck. And happy bidding!
AMADA LASMAC 667II CNC LASER
1990 Amada Lasmac 667II CNC Laser with Fanuc control. The maximum sheet size is 144" x 60" Please email or call(786) 440-5405 for more information.
IKO LWL 9mm linear rails for CNC laser 3D printer 30+ inches long
Aluminum piece is stuck to cars and socket head screws are stuck. This will need to be milled or use a dremel tool to get at the screw heads with a vice grip. Gave up on this project but could be very useful. The rails and cars themselves are in great shape.
#8 CNC SLIDE STEPPER LEAD SCREW BALL SCREW SERVO LASER ENGRAVER THK NSK
Light duty single axis slide unit powered by a frame 17 stepper motor connected to a 1" pitch lead screw. 17" travel with the attached cartridge mechanism. More if using just the nut. 23.75" oal x 4.75" wide. Shippping = $12.50 We have 16 cnc/automation/motion related items for sale this week, just search under northstar75.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-145cbd960ec-0xeb-
#7 CNC SLIDE STEPPER LEAD SCREW BALL SCREW SERVO LASER ENGRAVER THK NSK
Single axis medium duty stepper motor powered slide unit with 13" of travel. Motor is PowerMax frame 23 stepper. Screw is.5" pitch and rail is low profile 40mm wide with two bearing blocks. Included is a aluminum plate and right angle aluminum extrusion for connecting the driven arm to the bearings. 22" oal with a 8.25" x 7" end plate. Shippping = $20.00 We have 16 cnc/automation/motion related items for sale this week, just search under northstar75 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-145cbd9607f-0xf9-
#5 2 AXIS XY UNIT CNC STEPPER LEAD SCREW BALL SCREW SERVO LASER ENGRAVER THK NSK
Light duty XY setup with 23.5" of travel on the longer axis with dual bearing blocks on a THK 15mm rail and 13" of travel on the shorter axis with dual round rails. Motors are both dc with several gear/belt drives to increase torque. OAL dims = 31"l x 4.5w(x axis) and 14"l x 5.5"w(y axis) Bodies made of cast abs plastic. First of two identical units Shippping = $20.00 We have 16 cnc/automation/motion related items for sale this week, just search under northstar75
#4 CNC STEPPER LEAD SCREW BALL SCREW SERVO LASER ENGRAVER
Stepper motor powered lead screw. 15" long, 13.25" travel, 5" pitch. Motor is PowerMax frame23, 1.8* Mount measures 4.25" wide with 4 mounting holes. Helical coupling between motor and screw Shippping = $10.00 We have 16 cnc/automation/motion related items for sale this week, just search under northstar75
#3 CNC LINEAR SLIDE THK NSK SERVO STEPPER LASER ENGRAVER
These are THK brand'U' channel bearing slides. Light duty rails, 24.5"l x 1"w x.25" deep, each with 4 circulation ball bearing carriages, 2.625"l x 1.625" wide. Like new condition from a clean room. Shippping = $10.00 We have 16 cnc/automation/motion related items for sale this week, just search under northstar75 a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-145cbd9608f-0x108-
#2 CNC LINEAR SLIDE STEPPER POWERMAX SERVO THK NSK ROUTER LASER
Here is a nice little single axis slide unit powered by a PowerMax 1.8* frame 23 stepper motor. Travel is 8.75" via a 10 pitch lead screw, supported on a THK RSR15 rail with one bearing block attached to the carriage but containing 2 additional bearing allowing a much longer stage to be mounted. OAL = 16.5"l x 4.25"w x 3" h. Shippping = $15.00 We have 16 cnc/automation/motion related items for sale this week, just search under northstar75
4000 WATT AMADA "FO3015" CNC FLYING OPTIC LASER W/SHUTTLE TABLE - #TW262
TW262. 4000 WATT AMADA CNC"FLYING OPTIC" LASER W/SHUTTLE TABLE New 2000. Serial No. 07510057, Model F03015 EQUIPPED WITH: Fanuc#160i-L CNC Controller 4000 Watt Fanuc AF4000A Laser Resonator(Model C4000. S/N A04B-0815-B301) Amada"EGG-CRATE" Dual-Shuttle Table(Model LST3015-FO. S/N 30155012) Flying Optics 15 Ton Orion Chiller Unit(Model RKL-15000) Torit Dust Collector CATALOG SPECIFICATIONS: Laser Output. 4000 WATTS Peak Pulse Power. 5000 WATTS X-Axis Travel. 122.8" Y-Axis Travel. 61" Z-Axis Travel. 7.87" Sheet Size. Maximum. 60" x 120" Material Weight Capacity. Maximum. 1850 LBS Material Thickness Carbon Steel. Maximum. 75" Material Thickness Stainless Steel. Max.375" CC Material Thickness Aluminum. Maximum. 375" Table Dimensions. W x L. 60.02" x 120.02" Cutting Speed. Maximum. ... more787 IPM Axis Positioning Speed. Maximum. 3150 IPM Axis Positioning Speed. 45-Degree Vector. 4554 IPM Z-Axis Speed. Maximum. 2362 IPM Machine Footprint. L x W. 385" x 107" Weight Approximately. 35000 LBS PRICE: F.O.B. OUR WAREHOUSE. $149.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Rofin/Baasel Lasertechnik Starcut Tube 18 CNC Stent cutter NdYAG Laser
Up for sale is an Baasel Starcut 18 Tube CNC NdYAG LASER. Used for cutting of small parts, Freight Only. Needs skid and rigging which is not included. I will gladly help with coordination at buyers cost. Also. Feel free to make offers, all reasonable offers will be considered.
50 Watt 876nm DPSS Coherent Laser Diode Module with fiber Red not Green for CNC?
You are bidding on a used Oclaro 50 watt 876nm laser diode module with fiber. This module includes a 3' fiber and is sold as used. I currently do not have a laser power meter that I can test this lasers output with but I'm fairly sure it's capable of putting out the marked rated output. The hole burned into the plastic monitor stand was done. In less than 2 seconds from 2" away. I don't know if this unit has a cooler inside but it never became more than warm to the touch. The 2 small white wires are marked therm1& therm2 at the connector and are probably a thermocouple output of some type. Due to the sensitive nature of this item. It is being sold as-is without a warranty. NOTE: The buyer must be over 18 years of age and agrees to take full responsibility for safety risks involved with this type of equipment! Shipping ... moreoutside of 48 US States is extra! G6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146a9335e61-0x106-
MAZAK MODEL STX HiPRO SUPERCHARGED 2000 WATT CNC LASER
Item#2156 MAZAK MODEL STX HiPRO SUPERCHARGED 2000 WATT CNC LASER Equipped With: Orion chiller Ball screws rebuilt 2007 Resonator rebuilt February 2010 Machine Specifications: Type: CNC Laser Model No: STX-48 Hi-Pro Supercharged Wattage 2000 Bed Size: 4' x 8' Control: MAZAK L32B CNC Control X-Axis Stroke: 104.3" Y-Axis Stroke: 50" Z-Axis Stroke: 3.9" Max. Work Piece Size: 98.4" x 49.2" x 0.47" Max. Load Capacity: 648.5/ lbf Year Mfg. 1994 Shipping Point: Price: $59.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call Kevin Brewster with all your equipment questions-203-441-4655 or 860-483-0905
200W laser Welding machine w/ CNC control
Normal 0 0 2 false false false MicrosoftInternetExplorer4 You are bidding a complete set of high power YAG welding machine. This machine is design for industrial parts welding. With a build in industrial computer CNC control and XYZ table, Z axis is control the height of the laser optical system. This complete system is ready to use once connect with 220V power. We had this 100% test before ship out and guarantee to work. This is our demo machine which had around 100 hr. of operation. Machine work perfectly and just required user to add cooling water and provide power to start welding object. REMARK: this is high power laser welding equipment. Do not place anything other than welding object under the optical output, serious injury may result and we are not responsible for any result of misuse of this machine. The YAG laser crystal rod is ... moreelement very sensitive to temperature, although the system had built in protect, any misuse and cause the rod damage is not included in the unit warranty. Features high light: Able to weld wide range of alloy such as titanium. Nickel, tin, copper, aluminum, stainless steel etc. High clarity LCD display output of laser view. Motorized foot-switch control laser spot and height. CNC control welding table to computerized. Automated the welding process, suitable for production line. For those new to this machine. Following is the basic operation: 1. Turn ON the machine power. The industrial rack mount computer and complete set of monitor, keyboard, mouse all you to enter the G code, or load the preprogram G code file to run. 2. The machine cooling system will run and water cool the laser. Once around 20 sec warm up time, the machine is ready to preform welding. 3. Place your parts on the CNC table. The machine will able to control the X.Y, Z motion and run the program path with the start and stop laser command. 4. Laser output power; pulse width can be preset by the machine LCD panel. 5. Test run the sample parts and adjust the focus of the laser. Once the focal point set, which als
CNC Laser Cable. FAP 800 laser combining cable 808nm 18 feet / 5.5 meter long.
Use this cable to deliver powerful laser energy to your work piece. By combining two 40w or 50w FAP-800 lasers for a total of up to 100W. According to the manufacturer. it is a 5 meter cable. Including branch leads it measures approximately 5.5 meters or a little over 18 feet. FAP-800 Laser units NOT included.
CNC CONTROLLER * LATHE MILL ROUTER GEAR HOBBER PLASMA LASER
CNC Controller Hewlett Packard or IBM Computer for Reliability 3.0 Ghz Windows XP pro w C.O.A. MACH3 installed to UPGRADE an existing CNC machine or make your own CNC Lathe. Mill, Router, Plasma cutter, etc. This is a USED computer with Freshly reloaded LICENSED XP pro and MACH3 CNC software installed. 4-AXIS CAPABILITY(Upgradeable to 8 axis with an additional PCI card) Mach3 is pre-installed and pre-configured. you only need to do One simply step of Calibration specific to your machine. all Gear ratios. Lead screw, ball screw, pitch rations are autmatically calculated and adjusted in the Calibration step) Professional companies are making CNC machines with Mach3 UPGRADES/ Conversion with MACH3* Lathes* Mills* Routers*Grinders* Lasers* Plasma* Engravers* Gear cutting* Hot Wire foam cutters INCLUDES CNC Controller WINDOWS XP pro w COA Keyboard ... moreLCD Monitor PC interface Cable to Breakout board. Breakout Board for 4 AXISes and peripherals Digital INPUTS& OUTPUTS Mach3 CNC Software(Demo version Fully functional. limited to 500 lines of code w/o any license. more than enough more most applications. Lazy CAM(G-code converter) Instructional videos. Ebooks AUTOCAD, other softwares, programs, Unit-converters, etc. etc. VECTOR Graphics program CAD Design program VERI CUT a program to verify that the G-code you're about to run is correct. Universal Unit converter AutoCAD viewer Raster to Vector Graphics converter(then you can convert Vector to G Code for router or Laser. Etc. Image capable device) some FLASH Screens, Pre-made parts TEMPLATES(G-code) which you can modify and save as your own Parts production other CNC related eBooks Power Cord UNIT Converter Sftwre. Calculating) measure distance. Speed, pressure, temperature, etc. etc. CD compilation of all CNC related Data Programs. Instructional Videos, Utilities, ebooks, etc. took a large amount of time and effort to research, find, compile. All for you in one CD. INTERNATIONAL Bidders Please Contact before bidding. Regarding Shipping details. Questions
DUAL PLC CNC ROUTER LASER MILL ASSEMBLY CONTROL CABINET
What an ideal start for any sort of automation project. If you design your own equipment this cabinet will save you dozens and dozens of hour and many hundreds of dollars. It is easier to wire pre-existing pre-mounted controllers and accessories than start from scratch. This cabinet sports a pair of DL205 PLCs by Keyence. A 6 and a 9 slot, both heavily populated. Total capability of these units is 96 inputs and 56 outputs. There are 3 banks of pneumatic solenoids. Terminal strips with literally hundreds of connection points, power supplies, heavy duty switches and much more. Cabinet dimensions are approximately 52 x 24 x 10 inches. Combine this with the aluminum T-channel machine frame I have listed(item# 380335699337) and you are well on your way to having the basic infrastructure for whatever type of assembly machine. Pick and place machine, ... moreor machine tool control system you need. Local pickup is free. By appointment, and if you need freight delivery, just email me for a quote. PLC MODULES 10 SLOT COUNTER 64 inputs 40 outputs 6 SLOT COUNTER 32 inputs 16 outputs DL205 DL205 D2- CTRNT Counter input module D2-RSS Remote I/O system slave module D2-32ND3 quantity 2 32 point 24VDC input module D2-32ND3 32 point 24VDC input module D2-16TD2-2 quantity 2 16 point 24VDC output module D2-16TD2-2 16 point 24VDC output module D2-RMSM Remote I/O system master module F-208TRS 8 point output module 12-28VDC Combine this with the aluminum T-channel machine frame I have listed(item# 380335699337) and you are well on your way to having the basic infrastructure for whatever type of assembly machine. Pick and place machine, or machine tool control system you need. Local pickup is free. By appointment, and if you need freight delivery, just email me for a quote. My goal is 100% customer satisfaction. Each sale, every sale. If there is a problem of ANY sort, please contact me- just use the contact the seller feature- IMMEDIATELY. I will make every reasonable effort to accommodate you both before and after the auction. Plea
Eckelmann EAG0068295 Laser Control System CNC-20 Innolas ILS 700P Used Working
This Eckelmann EAG0068295 is used working surplus. The physical condition is good. But there are signs of previous use and handling. This item was removed from an Innolas ILS 700P System. Part No: EAG0068295 Model No: CNC-20 85-264V. 47-63Hz, 100VA Removed from an Innolas ILS 700P System Made in Germany Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 24"x12"x12" 20 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country ... moreof manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 12 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or pa
2200 Watt CNC with PRC Laser - Strippit Helios
Helios Strippit with 2000 Watt PRC Laser. Full CNC. Machine was rebuilt and upgraded. Runs perfect. Can demo. Machine located in sunny Arizona. Laser has New Glass and Optics. Ball Screws Freshly Rebuilt in 2013. Upgraded Non Contact Head. Fully Under Power and Can Demo the Machine. Full CNC. New Beam Path Mirrors. Only 21.000hrs. Only 100hrs Since Rebuild. See it in action: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146e593bdda-0x111-
2000 WATT AMADA PULSAR LC2415XLA3 CNC LASER SYSTEM, NEW 1998, Fanuc 160i-L
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 2000 WATT AMADA PULSAR LC2415XLA3 CNC LASER SYSTEM. NEW 1998, Fanuc 160i-L Ref# 152673 iammdna XLASER(1) USED 2000 WATT AMADA PULSAR LC2415XLA3 CNC LASER SYSTEM MFG:1998- APPROXIMATELY 47.600 HOURS TURBO ... moreBLOWER LAST REPLACED@ 35.035 HOURS Fanuc 160i-L Motion Package Travel Method:X axis for work piece movement.Y axis for cutting head movement Control Method: X. Y& Z simultaneous 3 axis control and B axis Drive Motors: FANUC AC Servo(X. Y, Z and B) Maximum Sheet Size: 61" Y) x 198" X) with one repositioning cycle Maximum Axis Travel: 61" Y) x 99" X) x 11.8" Z) x 0.78" B) Maximum Cutting Speed: 2362 IPM Maximum Table Speed: 3.149 IPM. per axis(4,454"min. 45O vector) Maximum Speed- Z-Axis: 2362 IPM Positioning Accuracy 1: 0.0004"20" Repeatability: 0.0002" Maximum Material Weight: 727 lbs. 5' x 10' x 3/8" or 4' x 8' x 1/2" Number of Clamps: 3 Work Chute: 66" Y) x 21" X) Assist Gas: 4 ports. Part program selectable Machine Size(WxDxH) 99" x 225" x 90" Machine Weight: Approx. 20.000 lbs. including laser resonator Machine Location: HARRISON. NJ Click Here For More Amada Machines Click Here For More CNC Turret Punches& Lasers- LASERS(s) Click Here For More Miscellaneous- LASERS(s) Questions about this Machine? Call Mark at(800) 873-6224 ext 7510 Need a Freight rate? Call Alex.
Rofin CNC StarWeld 5 Axis LASER Welder NdYAG Fiber
Rofin StarWeld 5 Axis LASER Welder. Startup assistance available and free shipping within continental US with Buy it Now.