|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 40W Lightburn-Supported (12" X 8") CO2 Laser Engraver & Cutter -The ONLY ONE 40W Compatible with Lightburn on the Market. Together, these upgrades ... moreensure a refined engraving experience for users.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States Upgrade your laser engraving experience with our autofocus sensor kit. The autofocus pen senses the correct focus distance from the laser head to the ... moretarget material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 80W CO2 Laser Cutter and Engraver Machine, 24x36 Laser Workbed with Red Dot Pointer Autolift, Autofocus, Air Assist and LightBurn Compatiable ... morefor Wood Acrylic More. 80W CO2 Engraver Features. Max Engraving Speed: 800mm/s.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 100W Benefits. Comparison of Monport Large (80w -150w)CO2 Laser Engraver Cutter. 2-year warranty on all 100W laser machines and parts(Monport ... moreofficial Warranty Provided ). Monport 80w(24’’x36’’) ?.
Buy It Now
Free Shipping Condition: New Location: Tucker, United States The mounting holes center to center is 110mm. A new cover Handle for100W 1060 Big CO2 Laser Engraving Cutting Machine. This foldable handle is hard to ... morefind!
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Compatible with K40 CO2 Laser Engravers (40W). Radiate the heat away from your laser tube and cool down your machine with ease and reliability! Our industrial ... morecooling systems are known for their consistency, durability, and compatibility with 40W CO2 Laser Engraver machines.
Buy It Now
$900.00 Shipping Condition: Used Location: Kewanee, United States 40W Water Cool Sealed CO2 Laser Tube for Engraving Engraver Cutting Cutter Machine Description 1) Input voltage: AC 220v+30 or AC 110v+20(to be specified ... morewhen placing order) 2) Maximum output voltage: DC 25DV(40W; 50W) DC28KV(60W) DC35KV(80W) 3) Maximum current: DC20mA(40W;50W) DC23Ma(60W)DC28ma(80W) 4) Isolation withstands voltage: Input-output. Input-enclosure: AC2000V-100Ma-60s; negative pole of output connected to enclosure. 5) Protection: with well-grounded enclosure. Output circuit of power supply can be opened for short time( but arc between positive pole and enclosure should be avoided) 6) Response time(from time of input being available to the output current being up to nominal value) 7) TTL voltage level control: effective voltage level can be high or low through setting 8) Protection switch: for detection of cooling water. To protect laser device; or activate with enclosure is opened. 9) Laser power adjustment: a. by adjusting the output current of power supply through resistor; b. through PWM control(magnitude being TTL voltage level) 10) Environmental requirements: temperature(10~40? Relative humidity laser tube Specifications 40W 50W 60W 80W 100W Wavelength 10600nm 10600nm 10600nm 10600nm 10600nm Beam diameter 1.95 2.2 2.5 3.5 3.8 Power output(W) 40 50 60 80 100 Triggering voltage(KV) 22 22 24 28 35 Operating voltage(KV) 15 16 16 18 20 Operating current(mA) 18 20 22 25 30 Outer diameter(mm) 50 52 55 60 60 Length( mm) 700 1000 1200 1600 1800 Power stability ±5% ±5% ±5% ±5% ±5% We have 40w. 50w, 60w, 80w, 100w, 130w, 150w laser tube, power supply, optics parts. And other components for sale, Please contact us via ebay for. More information. Specification of this 40w Laser Tube. Model CO2-TUBE-40W-700CM Output Power 40W Wavelength 10600nm/10.6um Working Voltage 15KV(Trigging Voltage=22KV) Working Current 18mA Divergence 2.2(beam diameter) Dimensions Length 700mm Package 1pc 40W laser tube If you need the details of the instructions. Please contact us for more. ATTENTION: 1. We
Buy It Now
Free Shipping Condition: New Location: Chino, United States Co2 se aled laser tube. Not only that, this laser etching machine lets you upload your designs directly to the machine through WiFi or Ethernet & USB ... moreports; automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist along with a powerful exhaust fan to blow debris clear of the laser as it works.
Buy It Now
Free Shipping Condition: New Location: United States Why Choose VEVOR?. 100W CO2 Laser Engraving Machine. Adopts premium CO2 glass sealed laser tube with high power and fast speed. The machine is equipped ... morewith CO2 Infrared Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, etc.
Buy It Now
$84.52 Shipping Condition: New – Open box Location: Jackson, United States This Monport 40W 2.0 Laser Engraver (8" X 12"), equipped with Lightburn Comp CO2 Laser Air Assist, is perfect for those who want to add a personal touch ... moreto their products. The machine uses a computerized engraving method that utilizes a powerful 40 W laser, resulting in precise and high-quality engravings. Its brand, Monport, is well-known for producing reliable and efficient engraving machines. This engraving machine falls under the "Engraving" category, making it ideal for businesses in the printing and graphic arts industry. Buy this Monport 40W 2.0 Laser Engraver and take your business to the next level! COMES WITH WATER CHILLER!
Buy It Now
$19.00 Shipping Condition: New Location: China Engraving Cutters. RGB LED Strip Lights. Printer Parts. Printer Spare Parts. Other Printer Spare Parts. 3D Printer. 3D Printer Materials. Laser Tube.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States New Official Monport 40W Pro v2.0 (12" X 8") CO2 Laser Engraver & Cutter with Lightburn Gcode Key -The ONLY ONE 40W Compatible with Lightburn on the Market. ... more【v2.0 Upgrade】 Monport 2.0 40W Laser Engraver, we have upgraded the air assist function inside the machine.
Buy It Now
$634.00 Shipping Condition: New Location: Rancho Cucamonga, United States Laser Power 150W. The machine is equipped with a Rotary Axis and two workstations, Honey Comb Table and Blade Table. Laser Type CO2 Sealed Glass 10.64 ... moreum. Gross Power ≤1650W, 15A. Engraving Speed 300mm/s (11-3/4"/s).
Buy It Now
Free Shipping Condition: New Location: China You can use the machine again after the temperature down. Easy to Use. Note: This product does not include battery, battery model: model 2032, 3V, 3.6V ... moreare all fine. We provide technology support by online service.
Buy It Now
Free Shipping Condition: New Location: El Monte, United States 80W Ruida Co2 Laser Engraver 28"x20" Laser Engraving Cutting Cutter Machine. The laser engraving machine has a wider range of applications, higher engraving ... moreaccuracy and faster engraving speed. Autofocus Sensor Kit.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 60W 28" X 20" Autofocus CO2 Laser Engraver Cutter Fireproof Engraving, LightBurn Compatible,with Red Dot Pointer Autofocus Air Assist for Wood ... moreAcrylic More. 60W CO2 Engraver Features. Lasers emit radiation in the invisible form of light.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States W6 130W 160W 1650mm 80mm Yes 10,000h 10 months. Besides, you get 10 months warranty and the top level after sale service. Reci W6CO2 Laser Tube is featured ... moreas high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thickAcrylic Board cutting.
Buy It Now
Free Shipping Condition: New Location: United States Bring Your Ideas to Life with VEVOR Laser Engraver. Why Choose VEVOR?. 60W CO₂ Laser Engraver. This laser engraving machine has a 60 40cm engraving area, ... more60W laser tube optional, and M2 motherboard optional.
Buy It Now
$30.00 Shipping Condition: New Location: Walnut, United States
$54.01 Shipping Condition: New Location: Ontario, United States Adjustable Laser Head. Powerful Air Assist. Durable Honeycomb Workbed. Removable Bottom Plate. 12" × 8" Work Area.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Sturdy construction, high efficiency. JPT YDFLP-E-30-LP-S 30W. The laser beam quality is also a factor; JPT is a better choice for jobs requiring precision ... moreor artwork with intricate details. JPT 30W Fiber Laser Machine x 1.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Motorized Workbed. Included CW-3000 Water Chiller. 1x CW-3000 Water Chiller. 1x 60W CO2 Laser Engraver. This laser engraving machine's motorized workbeds ... morecan easily be adjusted up and down at the touch of a button.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 1x 60W CO2 Laser Engraver. Experience Clean Laser Engraving The honeycomb and aluminum blade beds feature a 16"x24" (400x600 mm) work area to fit most ... moreprojects. The built-in air assist efficiently removes smoke and dust to protect your laser lenses and reflective mirrors.
Buy It Now
Free Shipping Condition: New Location: United States Bring Your Ideas to Life with4040 50W CO2 VEVOR Laser Engraver. Why Choose VEVOR?. It employs a USB port and thus can be connected to your laptop or desktop. ... moreWith the support of included software CorelDRAW.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's midrange laser engraver!
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 1x 60W CO2 Laser Engraver. 40W Laser Tube. Experience Safe & Clean Laser Engraving Air Assist & Exhaust Fan. The honeycomb and aluminum blade beds feature ... morea 20"x28" (500x700 mm) work area to fit most projects.
$17.01 Shipping Condition: New Location: United States • 16x24 Laser Worktable: OMTech's 16"x24" honeycomb bed for fiber laser engravers boasts a flat, stable, and spacious working area over 2.7 square feet ... moreto fit your projects for DIY engravings. • Honeycomb Structure: The honeycomb structure provides quick heat dissipation and smoke exhaust as well as easy debris collection for efficient operation and easy cleanup.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 𝐒𝐮𝐩𝐞𝐫𝐢𝐨𝐫 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: Keep your laser engravers cool with OMTech's CW-5200 water chiller. With a 0.9 hp compressor and ... more3.2 gpm flow rate, it efficiently cools up to 5186 BTU per hour for optimal performance.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's midrange laser engraver!
Buy It Now
Free Shipping Condition: New Location: Ontario, United States
Buy It Now
Free Shipping Condition: New Location: Memphis, United States Upgrade your laser engraving experience with our autofocus sensor kit. The autofocus pen senses the correct focus distance from the laser head to the ... moretarget material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.
Buy It Now
$175.00 Shipping Condition: Used Location: Trinidad and Tobago This is a 30VDC SYNRAD air-cooled CO2 Laser rated 25W. The Laser was removed from a working GCC Mercury Laser Engraver. The tube laser power output was ... morereduced significantly so we suspect the Laser needs re-charging and/or servicing to restore full capacity but it was still firing. It can be used as is for low power service or it can be disassembled for parts. We are selling as is, low price with no warranty/guarantee and no return.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. I have been ... moreusing the OMTech 20w fiber for a few months now and I have to say that is has been a great experience.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this OMTech rotary axis has the capabilities to help you get the job done right. We love keeping ... morethe OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States
Buy It Now
Free Shipping Condition: New Location: United States With Water Chiller. Built-in Autofocus. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch of a ... morebutton and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States ATZER Honeycomb Working Table 300x300mm, Honeycomb Working Panel 12"x12", Laser Bed with Aluminum Plate for CO2 or Diode Laser Engraver and Cutting Machine.
Buy It Now
Free Shipping Condition: Used Location: Newburgh, United States HM Laser rotary for CO2 or diode laser engravers, universal fit and wiring. Fully adjustable for non cylindrical objects. Ships free.
Buy It Now
$47.46 Shipping Condition: Used Location: Grand Prairie, United States This Iradion laser has a peak output of 60 watts max. This laser was exchanged for a more powerful 120 Watt Iradion Laser to cut thin metals. It was stored ... morein 2022. The laser is in excellent condition. Comes complete with a Cosel DC power supply and a 635nm diode alignment laser and ZNSE alignment dichroic window installed. Diode laser will require alignment. Iradion Lasers are renowned for stability and performance with reliable Rf excitement for unsurpassed beam quality and power stability. If you are tired of liquid cooled unreliable tube lasers, This laser is your dream come true.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 60W 28" X 20" Autofocus CO2 Laser Engraver Cutter Fireproof Engraving, LightBurn Compatible,with Red Dot Pointer Autofocus Air Assist for Wood ... moreAcrylic More. 60W CO2 Engraver Features. Maximum Engraving Speed: 800mm/s.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! Engravings on round ... moreobjects are always demanding, but this OMTech rotary axis has the capabilities to help you get the job done right.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States ✨World’s First 35W Laser Engraver: 35W Laser Engraver has 160W machine power and 34-36W laser power. Glass printing machine has been tested to reach 24,800 ... moremm/min engraving peak. ✨Half the Work, Twice the Effect: The machine moves at an impressive speed of 24,800 mm/min.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States With Water Chiller. 1x CW-5200 Water Chiller. 1x 100W CO2 Laser Engraver. This laser engraving machine's workbeds adjust up and down at the touch of a ... morebutton and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States New Official Upgraded Monport 40W Pro v2.0 (12" X 8") CO2 Laser Engraver & Cutter with FDA Approval -The ONLY ONE 40W Compatible with Lightburn on the ... moreMarket. 【v2.0 Upgrade】 Monport 2.0 40W Laser Engraver, we have upgraded the air assist function inside the machine.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport - The ONLY ONE 40WCompatible with Lightburn on the Market. 40W CO2 Engraver Specification - Lightburn Software Comp. With Lightburn laser software, ... moreyou can: Import artwork in a variety of common vector graphic and image formats (including AI, PDF, SVG, DXF, PLT, PNG, JPG, GIF, and BMP).
Buy It Now
Free Shipping Condition: New Location: United States Why Choose VEVOR?. 130W CO2 Laser Engraving Machine. Laser Power: 130W. The large working area of 55"x35"(140x90cm) features a bending table, which adopts ... morea honeycomb structure, with high strength, anti-deformation, sound absorption, and heat insulation.
Buy It Now
Free Shipping Condition: New Location: El Monte, United States And the running system of our machine is Windows. but if you use the Lightburn, it can compatible with iOS system and Linux. The machine has doors that ... morecan be opened to accommodate larger materials.
Buy It Now
$8.74 Shipping Condition: New Location: Poughkeepsie, United States See Video - Hands Free Focal Stick. Attached to your laser. Eliminates all focal sticks. Galvo Fiber Co2 UV Lasers. Handsfree Focal Stick. Permanently ... moreattached to your laser to replace all old school focal sticks.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! Simply use the ... more13 ounce aerosol can to apply the agent evenly across your substrate, wait for 5 minutes or use a hot air blower for even faster drying, and engrave your design as normal.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States 1x 60W CO2 Laser Engraver. Rotary Axis Compatible. 40W Laser Tube. Experience Safe & Clean Laser Engraving Air Assist & Exhaust Fan. The honeycomb and ... morealuminum blade beds feature a 16"x24" (400x600 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's midrange laser engraver!
Buy It Now
Free Shipping Condition: New Location: United States 1 Xlaser engraving machine. 16.Red-light Pointer/Electric lift/. Motor system:Stepper motor system. sheet precision cutting industry. Lighting system:LED ... morelight with high-brightness. Support software:CorelLASER /LaserDRW/WinsealXP/CorelDRAW X4 SP2.
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States With Water Chiller. Built-in Autofocus. 1x CW-5200 Water Chiller. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and ... moredown at the touch of a button and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
$4.19 Shipping Condition: New – Open box Location: Wyandanch, United States This laser engraving machine is a top-of-the-line device for all your engraving needs. Crafted from durable materials, it ensures longevity and precision ... morein every engraving job. With its advanced laser technology, it can engrave on various materials, including acrylic, with ease and accuracy. This machine boasts a laser engraving method that guarantees high-quality and detailed engravings for your projects. Whether you're a professional engraver or a hobbyist, this engraving machine is perfect for you. Its versatility makes it ideal for a wide range of industries, including printing and graphic arts, screen and specialty printing, business, and industrial use. Get yours now and take your engraving game to the next level!
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 40W 12"x 8" CO2 Laser Engraver Marker w/ K40+ Motherboard for LightBurn. Monport 40W (12" X 8") CO2 Laser Engraver & Cutter with FDA Approval-The ... moreONLY ONE 40W Compatible with Lightburn on the Market.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States RECI W6 / S6 130W-16 0W CO2 Sealed Laser Tube. W6 130W 160W 1650mm 80mm Yes 10,000h 10 months. Reci W6 CO2 laser tube is featured as high power rate, ... moregood model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting.
Buy It Now
Free Shipping Condition: New Location: United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. We love keeping the OMTech family on the cutting edge ... moreof laser crafting because we know our growth is inseparable from your success.
|
|
|
|
Lot of 13 - CO2 Laser Optical Mirrors/Reflectors - Mounted/Unmounted, Adjustable
Up for sale are thirteen mounted/unmounted(with screw-backed plates) CO2 Laser Mirrors/Reflectors pulled from a Laserscope medical unit. They are all in excellent condition. With the few and far between smaller than hair scratch or dot periodically found on them. I didn't get any pictures of the tiny cosmetic spots because the camera can't see them. If it turns out they interfere with functionality feel free to return them, but my bet is they are just fine. If you have questions feel free to ask and payment due within 24 hours of purchase or they get relisted. Thanks. Bill.
|
|
|
Domino CO2 DDC2/3 Laser w/RF Power supply
Domino Part number 002905 DDC3 Laser. Power rating is between 20 and 30 watts. Water Cooled C02 Laser and power supply. This laser operates beautifully. We used it for a time on our CNC Mill but not longer have need of it. Guaranteed not DOA. The I/O(control) plug on the RF unit has had two small wires“Tacked” to the ends of the two pins that turn the laser on and off. This unit operates in any orientation and as long as it is properly cooled will run on and on and on. We used this with Bobcad and Mach3 and it worked flawlessly. We are stating all we know about this Laser. All you need to operate is a 28 Volt DC Power Supply. A cooling water source and connection to your controller. This is the best description we are able to furnish. Thanks NO Shipping outside the CONUS. No exceptions.
|
|
|
Golden Oval CO2 Laser Mirror - Mounted - Beautiful
Up for sale is a Golden CO2 Laser Mirror. On Mount, in flawless or close condition. Flawless is a strong word for these sensitively coated things, which is why I say it's close if not. Either way if you don't think its worth the money you can send it right on back, just keep it in the same condition and wrap it back up for shipping as carefully as I will. If you have questions feel free to ask and payment due within 24 hours of purchase or it gets re-listed. Thanks, Bill.
|
|
|
RF EXCITED 40W SEALED SLAB CO2 LASER & RF PSU (Lasersonics, Synrad, Trumpf)
LEI ACCESS 40W CO2 LASER TUBE Auction is for one 40W slab RF excited CO2 laser head& RF power supply. The output this tube is producing is unknown. Great for a a project. Sold"As is" No returns. Specification Power: 40W Triggering Voltage: RF Excited Water cooling Water temperature: 20-25C(68-77F) Metal resonator mirror mount ends Refill inlet port Courtesy reminder: Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in rejection on all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. The buyer is responsible for the shipping cost of a replacement tube after 30 days of receiving. Details: Manufacturer: Model: Condition: Good cosmetic condition with some signs of previous use(See ... morephotos for more detail) Tested: Unit is not tested. Gas intact) Please review our page for all of our Term and Conditions below before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be re-listed at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) If you have any questions. Please contact us through Ebay. WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO ret
|
|
|
Low Power Metal Synrad RF Excited Carbon Dioxide CO2 Cutting Laser Optics Tube
This is a Synrad CO2 laser tube in need of a gas recharge. It is gas intact. But only puts out about 400mw. Zombie laser. The laser tube needs a 30VP 150W 47mHz RF signal to run. When new, it output about 13W of power at 10.6um, and a simple gas refill can make the laser tube good as new. This tube was originally part of a synrad J48-1 for a high end laser coding machine. If you need this it could be a great deal. I have lots of lasers and other unique tech stuff for sale this week. Just a heads up, several people notified me of trouble bidding near the end of listings, to avoid this disappointment, if you actually NEED this item either bid what you think it's worth early, or Buy it now outright. Many of the items i sell are extremely unique and several of them when they are gone, they are sold out for good. Thank you for looking at my ... moreauctions!
|
|
|
Synrad RF Excited Carbon Dioxide CO2 Burning Laser Industrial Tube High Power
Working CO2 Laser! Just add electricity! This is a complete Synrad CO2 laser that outputs about 12.6W as measured on a power wizzard laser checker. The laser needs a 24 to 30V at 9A or better power supply. And a 5V nominal(optical isolator- 2.5 to 6V is fine) signal to run. I have a very nice control box for this laser as well in another listing. When new, it output about 15W of power at 10.6um. This tube was originally for a high power laser coding machine. These lasers cost several thousand dollars new. Winning bidder gets dibs on the high current 28V at 12A power supply for an extra hunderd dollars by special listing. If you need this, it could be a great deal. I have lots of lasers and other unique tech stuff for sale this week.
|
|
|
High Power 12W Synrad RF Excited Carbon Dioxide Laser CO2 Cutting Tube J48-1
WORKING RF EXCITED CO2 LASER! This is a complete Synrad CO2 laser that outputs about 12.6W as measured on a power wizzard laser checker. The laser needs a 24 to 30V at 9A or better power supply. And a 5V nominal(optical isolator- 2.5 to 6V is fine) signal to run. I have a very nice control box for this laser as well in another listing. When new, it output about 15W of power at 10.6um. This tube was originally for a high power laser coding machine. These lasers cost several thousand dollars new. Winning bidder gets dibs on the high current 28V at 12A power supply for an extra hunderd dollars by special listing. If you need this, it could be a great deal. I have lots of lasers and other unique tech stuff for sale this week. Just a heads up, several people notified me of trouble bidding near the end of listings, to avoid this disappointment, ... moreif you actually NEED this item either bid what you think it's worth early, or Buy it now outright. Many of the items i sell are extremely unique and several of them when they are gone, they are sold out for good. Thank you for looking at my auctions!
|
|
|
NEWPORT Laser Safety Glasses 31-80101 OD 7 @ 1064nm, Nd:YAG, CO2,
NEWPORT Laser Safety Glasses 31-80101 OD 7@ 1064nm. Nd:YAG, CO2, NEWPORT Laser Safety Glasses MODEL 31-80101 Nd:YAG. CO2, OD 9@ 190-375nm. OD 3@ 800-840nm. OD 4@ 841-869nm. OD 5@ 870-1080nm. OD 7@ 1064nm. OD 7@ 5000-11000nm You are bidding on the EXACT Laser Safety Glasses pictured on this page. These have plenty of positive life left in them. They came from a working R&D Lab. PLEASE inspect all the pics on this page. THANKS For having a look! Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: This will be shipped by UPS ground as soon as payment is received. The buyer pays the actual Shipping Rate: UPS Ground/ Insured(USA only) International bidders contact us for shipping ... morerate International customers are responsible for any and all customs or duty fees charged upon receipt in your country. Those fees are not included in this sale. Shipped vis USPS) ALL INTERNATIONAL SALES ARE SOLD AS IS I have a huge assortment of Optical Parts& Equipment listed on Ebay and in My Ebay Store. Items have a 10-Day Warranty from the day you obtain them. If for some reason the item does not work properly or is different from the listing description- then we will accept a return on the item and provide a refund or exchange. Original shipping paid to obtain the item is non-refundable) However. If you buy an item by mistake or you buy a working item& you realize that you simply don't want or need it- there will be a 20% restocking fee. So please research the item you are buying and asks us questions. Payment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We accept Pay Pal Payments for varified shipping address. This is our preferred method of payment) For International sales- Bank Wire Transfer(add 25.00) Paypal- if pre approved) Recipient is responsible for all customs. Duties and taxes in
|
|
|
UNIVERSAL VOLTRONICS 50KV CO2 LASER PSU (Lasersonics, Laserscope, Synrad)
UNIVERSAL VOLTRONICS CO2 LASER POWER SUPPLY Auction is for Universal Voltronics 40W CO2 laser power supply. The unit was pulled from a working system. Have not tested so condition is unknown. Great for a a project. Sold"As is" No returns. Specification Power: 40W Triggering Voltage: 25KV Operating Voltage: 40KV Air-cooled Courtesy reminder: Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in rejection on all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. The buyer is responsible for the shipping cost of a replacement part after 30 days of receiving. Details: Manufacturer: Universal Voltronics Model: 40-25 Condition: Good cosmetic condition with some signs of previous use(See ... morephotos for more detail) Tested: Unit is untested. Please review our page for all of our Term and Conditions below before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be re-listed at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) If you have any questions. Please contact us through Ebay. WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be acce
|
|
|
CO2 laser tube - Union Medical UM-L25 - TESTED
25 W glass CO2 laser tube pulled from a working Union Medical UM-L25 laser. Tube was tested and passed at 10W. NO RESERVE!
|
|
|
CO2 Laser Thermal Sensor Detector Thermo-Electric Beam Dump Ophir
CO2 Laser Thermal Sensor Detector Thermo-Electric Beam Dump From Ophir High Power CO2 Head This sensor was removed from an Ophir Laser Power meter head and used in a custom beam dump/laser power detector for a CO2 laser. It is 2.4" in diameter. A heat gun brings the voltage to.6 VDC at about 110 F. Good cosmetic condition. Guaranteed to be working perfectly. NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ... moreME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing your bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b85cba538-0x104-
|
|
|
CO2 Laser Mirror/Reflector - Coated & Mounted
Up for sale is a used CO2 laser mirror. Mounted in a circular mount with three holes around the outer portion for screws, which I can provide if the buyer would like. Cosmetically it's in excellent condition. With one or two minuscule dots, which shouldn't hinder usage at all. Also on the back you'll notice the glue around the edge, this is normal and is irrelevant to proper functionality(because it's a mirror and the back side is never used) Regarding returns. I'll only accept it back if it doesn't function properly or if it doesn't land on your doorstep in the cosmetic condition I've described it. If you have questions feel free to ask. And payment due within 24 hours of purchase or it gets re-listed. Thanks Bill
|
|
|
CO2 Laser Lens - Coated & Mounted
Up for sale is a used CO2 laser lens. Mounted in an"L"style mount with two holes in the base of the L for screws, which I can provide if the buyer would like. Cosmetically it's in excellent condition. And truly it feels like a germanium lens but I'm not sure that those are used in CO2 lasers, even industrial ones(which is where this came from) so I guess it's silicon-based. However, if I'm wrong and it is germanium someone is getting a good deal for sure. Regarding returns. I'll only accept it back if it doesn't function properly or if it doesn't land on your doorstep in perfect condition, which is how I've described it. If you have questions feel free to ask. And payment due within 24 hours of purchase or it gets re-listed. Thanks Bill
|
|
|
UVEX L99-LSK-CO2/ASA Laser Uvex Safety Glasses Eyewear
UVEX L99-LSK-CO2/ASA Laser Uvex Safety Glasses Eyewear(ref 0300) UVEX L99-LSK-CO2/ASA. O.D. 7 at 190-380nm. O.D. 5 at 10.600nm. 514. What you see is what you will get. Please, feel free to contact me with any questions regarding this item. Bid with confidence. Check my excellent ebay feedback rating. Satisfaction guaranteed! Shipping: shipping and handling in the continental U.S. is $13.50. International will be $25. Multiple winning bids can combine to save postage. Satisfaction Guaranteed! Every item I sell is guaranteed to be original unless described otherwise. If you are not satisfied with an item. I will refund your money minus my shipping and handling costs provided you contact me 14 days after the sale ends. Items are from a smoke and pet free home: Powered by The free listing tool. List your items fast and easy and manage your active ... moreitems.
|
|
|
1974 Western Electric CO2 Laser circuit board drilling report vintage print Ad
Original print advertisement from 1974(not a reprint or reproduction. All of our items are originals) Condition Grade: VG Size: 8 x 11 inches. Packaging: Item packed flat in a stiff cardboard mailer and then sealed in a waterproof poly mailer. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ALMA PIXEL CO2 LASER 2008. NO RESERVE
2008 Alma Pixel Laser in great condition. All service performed. This unit works perfectly. No reserve! Happy Bidding!
|
|
|
R. Wolf 8912.401 0 degree, 10mm w/CO2 Laser Offset Scope
R. Wolf 8912.401 0 degree. 10mm w/CO2 Laser Offset Scope This Set includes all of the following: R. Wolf 8912.401 0 degree, 10mm w/CO2 Laser Offset Scope This unit has been refurbished and is in good working condition! PAYMENT POLICY: Credit Card(Please fax or e-mail a copy of your credit card(back and front as well as a copy of your ID reflecting the billing address of the credit card and our credit card authorization form authorizing the purchase of this product) Please contact us at 253 777-4479 if you would like to pay with a credit card. We accept Visa, MasterCard, Discover& American Express. PayPal· Business Check(Products will ship once check clears) Wire Transfer(Please contact us for wire transfer instructions) INTERNATIONAL SHIPPING: Buyers are responsible for all customs charges inclusive of any and all taxes and duties. ... morePlease be sure that the item that you are purchasing can be imported into your country. Shipper is not responsible for any delays once the package leaves our facility. DISCLAIMER: The item is in its original condition and no alterations have been made to the item. The item has been properly stored and handled, following the manufacturers recommendations. This item does not come with any other accessories besides what is specifically mentioned in the description or shown in the pictures. This item is not a food or medical product that has expired. This item does not appear to be damaged or mishandled. ALL SALES ARE FINAL. FDA REGULATION AND CERTIFICATION: Sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser· If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health: Attention EBAY staff: These items do not require a prescription and meets all current requirements for listing.
|
|
|
Pfizer 30W CO2 Laser Aperture
The Alternative Source Medical Pfizer 30W CO2 Laser Aperture Please inquire if you would like more pictures or information. Please view pictures- what is pictured is what is sold. This item is sold in as-is working condition. See below for details. Do not hesitate to contact me at Law@tasimed.com or 847.419.0123 We will do our very best to respond to all questions within 24 hours Our phone is operative Monday- Friday 9:00am to 5:00pm CST. Email is available 24 hours a day Our goal is make sure you are satisfied with your purchase. Please let us help Please pay promptly upon purchase of the item. Sales will be cancelled if payment is not received within three days after purchase. We do charge sales tax in IL. WI and MI. We accept all major credit cards- Visa. Mastercard, Discover, American Express, PayPal, Items will not ship until funds have ... morecleared. Our normal handling time is three days. But this may vary dependent on the item. Shipping and handling is paid for by the purchaser. We ship FedEx unless instructed otherwise. We can expedite shipping upon request. Contact us for a quote! We are happy to combine purchases to save on shipping costs. For international shipments. Purchaser is responsible for all Taxes, Custom, Duties and other fees for exportation/importation. Unless otherwise stated. All items are sold in As-Is Working Condition. That is to say that upon delivery, the units will work and function as expected. If the item does not function upon delivery contact me immediately at Law@tasimed.com or 847.419.0123 for a refund upon return of the defective items. Unless stated otherwise. We do not offer extended warranties beyond delivery and acceptance of the item by the purchaser. Please read and review the full listing before purchasing and ask questions if you have any concerns. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is sub
|
|
|
Quote 2 resurface YOUR CO2 ZnSe Hobby Laser Lens 20mm 19 18 40w cutter engraver
Untitled Document SUBJECT OF AUCTION Hello THIS AUCTION IS FOR QUOTE TO SAY YOU HOW MUCH IT WOULD COST TO YOU TO- RESURFACE YOUR ZnSe LENS- You are NOT buying a lens! If you like to buy a lens please follow these links. We have: 12.7mm http:www.ebay.com/itm/USA-CO2-ZnSe-Laser-Focus-Lens-12-7mm-40W-to-50W-cutter-engraver-FD-2-Infrared-151566820123?ssPageName=STRK:MESE:IT 18mm http:www.ebay.com/itm/CO2-ZnSe-Hobby-Laser-Lens-18mm-40-100W-hobby-cutter-engraver-FD-2-034-or-2-5-034-50mm-151592583010? 19mm http:www.ebay.com/itm/CO2-ZnSe-Hobby-Laser-Lens-19mm-40-100W-hobby-cutter-engraver-FD-2-034-or-2-5-034-50mm-151592581230? 20mm ZnSe lenses in stock. http:www.ebay.com/itm/CO2-ZnSe-Hobby-Laser-Lens-20mm-40-100W-hobby-cutter-engraver-FD-2-or-2-5-50mm-151566818278?ssPageName=STRK:MESE:IT Those are highest optical quality Made in USA lenses. 100% ... morequality guarantee or your money back! Here how this item works. Once you purchased this service you would need to send us couple DETAILED pictures of your lens where damage can be clearly seen. Then we will send you a quote how much it will be to resurface it! Please note. That resurfacing will be MORE expensive then if you buy new one! So if you see the size you need in stock. Better to buy a new stock item. In case you have some odd size, then this service could be helpful for you. ON MORE TIME! NO LENS WILL BE SENT TO YOU AS A RESULT OF THIS AUCTION! Lens Specifications Focal Length Tolerance ±1% Diameter Tolerance +0.0/ 0.1mm Centre Thickness Tolerance ±0.2mm Clear Aperture = 90% Diameter Edge Thickness Tolerance ±0.15mm Scratch/Dig 2 0/ 1 0 Surface Accuracy 入/2@632.8nm Centration Bevelling Coating AR Both Sides If you need any other sizes or quantities please let us know we can make one for you. Buyer to exercise due diligence to assure fit and size. Please check the size of your existing lens to be sure this will fit your laser engraver/cutter WE ALSO SELL MIRRORS FOR CO2 LASERS. Check out my! ITEM CONDITION NEW PACKAGE CONTENT Here is what you will g
|
|
|
Karl Storz 26035LDT CO2 LASER COUPLER 1742
Karl Storz 26035LDT CO2 LASER COUPLER 1742 MDI REPAIRS.LLC IS A EXCELLENT RIGID ENDOSCOPE REPAIR FACILITY IN SUNRISE. FLORIDA We specialized in all rigid endoscopes from needles scopes to operating laparoscopes and repair to meet OEM SPECS We charge $349 dollars flat rate for common scopes such as; Arthroscopes and Cystoscopes and we will ship them back through FedEx at no extra cost. Our turnaround time is usually within a business day. Maximum of two days. For more info please contact us at ebay@mdirepairs.com or call 954-916-7347 We have many other scopes in stock. If you can’t find it on our store at ebay. Contact us for price details. We speak English. Spanish, and Portuguese. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this ... moreitem unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. DISCLAIMER: the equipment described and offered here is in no way certified for. Recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. THANK YOU FOR LOOKING
|
|
|
Accuvet (Lumenis Luxar) LX-20SP Novapulse Surgical Veterinary CO2 Laser
Call Us to Schedule a LIVE Skype Demonstration! 317-570-0448 Accuvet(Lumenis Luxar) Novapulse LX-20SP Completely Refurbished and Regassed Laser Tube. Inspect in Office. Via YouTube, FaceTime or Skype Video Call! $12.900.00 $295.00 Image gallery Model: LX-20 SP Completely refurbished and tube regassed. Stock# 2016 Manufacturer: Lumenis Luxar Accuvet, DOM: August 2001, SN: 523755-01 System Includes: Waveguide, Straight handpiece, Angled Handpiece, Foot Pedal, System Key, Power Cord, Laser Eyewear, Owner's Manual, Professional Packing/ Crating, In Office Clinical Training Available(at additional cost) View system HERE: At The Laser Agent we are a dealer. NOT a broker. What does this mean? Unlike most of our competitors we do not sell on consignment. We stock all of the inventory we sell. With over 16 years experience in the laser industry. ... moreWe are exclusively dedicated to pre-owned lasers and aesthetic equipment. The Laser Agent is a leading source for new and pre-owned laser& aesthetic systems in the United States and around the world. Every system has been inspected. Tested and is in stock for immediate shipping. The system in our listing IS THE SYSTEM YOU WILL RECEIVE. We accept: Visa. Mastercard, Discover, American Express PayPal Cashier's Check Bank to Bank Electronic Transfer(We will send you our banking information after purchase) Escrow.com COD We will ship your system as soon as your preferred method of payment has been received and verified. If you opt to pay by check. We will ship the system at the time the check clears completely. Payment by bank wire transfer or www.Escrow.com only. Please feel free to contact us before bidding for details. Your system will ship immediately after payment has cleared. Usually within one business day. All systems are professionally wrapped and crated. 7% sales tax will be added for sales within Indiana only. We reserve the right to end this auction early as this unit has been listed for sale locally and through other venues. Required Disclaimer: The sale of thi
|
|
|
Lumenis Novapulse Supreme CO2 Laser
0 Came from working environment We do not have the Password or Access Code We sell it as is for parts Only what is pictured/in description is included This unit is surplus from a local university hospital CONDITION USED. Tested for proper operation. Selling As Is. Unit Removed From Hospital In Working Condition. Unit Powers Up. All Buttons respond when touched. COSMETICS Pictures are the actual item. Please see pictures for cosmetics. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. DISCLAIMER The purchaser agrees that the seller. Shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with this item. Once the buyer purchases this equipment, it indicates one's acknowledgment of, ... moreand agreement to the terms of this disclaimer. PAYMENT Only PayPal Accepted All Items will be shipped out within 72 hours of purchase. If you have any problems with the item please email us so we can work the problem out FDA REGULATION AND CERTIFICATION The sale of this item may be subject to strict regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. No warranty is expressed or implied. It is sold"as is" Definitions: AS-IS MEANS: The item is sold AS-IS Where is. This means that the buyer acknowledges that the item may or may Not be working and that the item may or may Not be complete and the buyer is willing to accept the risk. Please bid accordingly,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14ba3d238ff-0x112-
|
|
|
KENTEK: Laser Safety Glasses for UV and CO2 OD 6+ @ 200-360nm
KENTEK: Laser Safety Glasses for UV and CO2 OD 6+@ 200-360nm KENTEK: Laser Safety Glasses for UV and CO2 OD 6+@ 200-360 OD 6+@ 10600 Up for bids are LASER SAFETY GLASSES. These have been taken excellent care of- Slightly used with tons of life in them. I obtained these from a local lab that shutdown. You are bidding on the EXACT GLASSES pictured on this page. Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: This will be shipped by UPS ground as soon as payment is received. The buyer pays the actual Shipping Rate: UPS Ground/ Insured(USA only) International bidders contact us for shipping rate International customers are responsible for any and all customs or duty fees charged ... moreupon receipt in your country. Those fees are not included in this sale. Shipped vis USPS) ALL INTERNATIONAL SALES ARE SOLD AS IS I have a huge assortment of Optical Parts& Equipment listed on Ebay and in My Ebay Store. Items have a 10-Day Warranty from the day you obtain them. If for some reason the item does not work properly or is different from the listing description- then we will accept a return on the item and provide a refund or exchange. Original shipping paid to obtain the item is non-refundable) However. If you buy an item by mistake or you buy a working item& you realize that you simply don't want or need it- there will be a 20% restocking fee. So please research the item you are buying and asks us questions. Payment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We accept Pay Pal Payments for varified shipping address. This is our preferred method of payment) For International sales- Bank Wire Transfer(add 25.00) Paypal- if pre approved) Recipient is responsible for all customs. Duties and taxes incurred and payable to the carrier. Buyer must contact seller within 3 buisness days. Or your
|
|
|
30 Watt Coherent co2 Laser head with (2) 240V power supplies.
Worked in the UK. Not sure about converting it into 120V. Sold as seen. Very heavy item collect only.
|
|
|
Carl Zeiss MM6 CO2 Micromanipulator Surgical Laser Head Microscope Module w/Case
Search our eBay Store! Carl Zeiss MM6 CO2 Micromanipulator Surgical Laser Head Microscope Module w/Case SKU: JV-LEV-A-ZEMM6CO2SCOPE Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Carl Zeiss MM6 CO2 Micromanipulator Surgical Laser Head Microscope Module w/Case Model: MM6 CO2 We were unable to test this unit Unit's lens appears to be intact upon inspection Unit comes with 2 lens attachments; including an F-125(see image) Unit comes in its original wooden and custom padded case There are scratches. Scuff marks, marker writing, and sticker marks on this unit's microscope module and ... morecase Boxed Dimensions(L" x W" x H" 12 x 6 2/5 x 5 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. DO NOT bid on this item unless you are an authorized purchaser. If the item is sub
|
|
|
Heraeus Lasersonics Luxus 100 Medical Nd:Yag Co2 Laser
Heraeus Lasersonics Luxus 100 Medical Nd:Yag Co2 Laser For sale is a used Heraeus Lasersonics Luxus 100 Medical Nd:Yag Co2 Laser. This item is in pretty good cosmetic condition with some minor wear including scuff marks and scratches. The function buttons and connections are in good condition. The unit is on wheels and rolls well. Includes several accessories in the cart. Does not include the fiber-optic piece needed to work. Please refer to the photos below for more details on the item. Specifications: Brand: Lasersonics(Heraeus) Model: Luxus 100-Serial# 6151-Power: 40A 200/240V-Date Manufactured: Dec. 1993-Exterior dimensions: 31" wide x 26" deep x 48" tall We wired the unit up directly to our power source for testing. The unit powered right up and the display seemed to work properly. After initialization the unit stated ... morethat without the fiber portion that is put into the laser output hole that the unit could not be used. Also. The unit would not let us change any settings at this point. Due to this the unit will be sold as-is beyond powering on. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. I am Stephen Smith of Quick Stop Auctions located in Christiansburg, VA. This item will require freight shipping or local pick up at our facility in Christiansburg. VA 24073. The freight calculator below will show your shipping charges. We will add $40 for palletizing the item. This includes strapping it to a skid and wrapping with stretchwrap as well as cardboard and bubblewrap if it needs it. Should you wish to schedule your own freight shipping. We will only charge the palletizing fee. The freight calculator will ask for your Zip and a description of your delivery location. To save on shipping. Shipments can be picke
|
|
|
Epilog Zing 16 CO2 Laser Engraver/Cutter, 40 watt
Epilog Zing 16 Laser: The Epilog Zing 16 provides a 16" x 12" work area. But with the highest-quality engraving. There is no skimping here- all metal chassis, high-end components, and the engraving quality that Epilog Laser is known for. All of this, and Made in the USA too! Visit the official page. the video is the actual laser you're bidding on) We purchased the laser about two years ago for a business venture that didn't pan out. It was lightly used. We estimate about 20 hours of actual run time. Everything still works perfectly(see the video above) You can use Corel Draw or Adobe Illustrator to"print" files to be engraved or cut out on a long list of different materials such as wood, plastics(except PVC! leather, glass etc. See the official site above for a full list. Great for making a little extra cash on ... morethe side through personalized gifts, Christmas ornaments, customized frames etc. Please message me if you have any other questions!
|
|
|
Lumenis Coherent Ultrapulse 5000C CO2 Laser w/Foot Pedal and Lenses
Up for sale is a Coherent Ultrapulse 50000C with a foot pedal and some lenses. Overall it is in very good cosmetic and functioning condition. I had to switch out the end of power plug with one that would fit my socket in order to test it. So if the buyer would like, I can switch back to the one previously. It was basically just unscrewing the wires and putting them into a brand new socket, screwing them back in and poof, good to go. It cranked up just fine and shot out a nice healthy laser. Then I looked down to see I could crank it up even higher, so I may have gotten it up to a few watts before getting nervous that it was pointed at the wall and shut it down. The short version is that this unit looks good and performs well. Coming down to shipping. Its a couple hundred pounds and is on wheels, so freight is about the only answer unless ... moresomeone wants to pick it up locally. If freight, I can get it on a pallet, strap it down and wrap it in plastic wrap, then get it to a loading area with a bay door, but the buyer and I will need to get the shipping costs squared away together so it can be coordinated properly. Its not a big deal, just easier to do with good communication vs me hoping someone will be there for the driver on delivery day. So with all of that being said. If you have questions feel free to ask and payment due within 24 hours of purchase or it gets re-listed. Thanks. Bill.
|
|
|
MACKEN P10K 10,000W CO2 LASER POWER METER
THIS IS A USED MACKEN P10K CO2 LASER POWER METER WITH ZEROING KNOB. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION END. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES IF IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO WALK IN SALE. ALL BEST OFFER SALES ARE"AS-IS" 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14bbdb15d07-0x107-
|
|
|
SGDH-30AE SERVOPACK SIGMA II YASKAWA for Laser Co2 RF 3000 w and CNCheidenhain
If you need to see more pictures or details of this item. Please send us e-mail Thank you for visiting our store Shipping: We ship to worldwide within the 1-3 working days after clearly payment received and the delivery time depends on destination and other factors. It might take up to 21 days and Thailand post office is normally closed on weekend and public holidays. The EMS and Airmail shipping time are about 3-10. 14-25 working days respectively. The Tracking number will be provided after a shipment and it can be checked in the below link: http:track.thailandpost.co.th/trackinternet/Default.aspx?lang=en Payment: We only accept PayPal and ship to your PayPal address. Please make sure your provided address is correct and make a pay for it as soon as possible after you win the bid or within 7 business days of auction closing. Return: Return ... moreis accepted within 14 days after the buyer has received the item. If this item is defective upon receipt. Customer has up to 14 days from date of receipt for exchange of a new one. If you are not completely satisfied with your purchase. You may return it to us for a prompt exchange or we will refund your and return shipping will be paid by buyer. Contact Us: Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any questions. Our Customer Service staffs welcome you to email.We strive to answer all questions and resolve any problems as quickly as possible.
|
|
|
Allmark Laser Marking System CO2 Laser Operators Manual 1990
www.meci.com Allmark Laser Marking System CO2 Laser Operators Manual 1990 Click image to enlarge. Manufacturer: Part# MECI Part# Condition: Dimensions: Weight: Description: Allmark N/A 743-2709 Used Good Condition Length 11" Width 8.5" 0.6 Lbs Allmark Laser Marking System CO2 Laser Operators Manual 1990 Manual Is 8.5”x11” Softback With Around 50 Pages. Spiral Binding Printed In 1981. This Is The Operating Manual For The PM3217U There Are Only A Couple Illustrations. Most Of Manual Is Text Manufactured by: Allmark Part# N/A Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Payment We accept the following forms of payment: PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& Discover) ... morePlease call MECI to make your Credit Card Payment 800-422-3525 ext 5 830am to 500pm EST Mon-Fri Shipping Cost and Policy USA USPS Priority Mail or ground services are used. International Shipped USPS International Priority Mail or USPS First Class International. We will not mark as a gift in any circumstance. Shipping cost does not include import taxes. Duties or brokerage fees, these charges are the buyer's responsibility. Please check with your customs office to determine what additional cost my apply. COMBINED SHIPPING We will combine shipping the best we can. If you purchase other items we will put them in the same box if they can be shipped securely and safely together. Shipping cost at checkout will show the combined charges but additional charges may apply if needed. Please wait to make your payment until you have purchased all items. You have 3 days from the end of the first purchase to add additional items to your order. All of your purchases will be consolidated into one checkout with one payment. SALES TAX- For shipments to Ohio. We are required by State law to collect 7% Sales Tax. STORE PICKUP Please note in checkout the estimated date/time you want to pick
|
|
|
C114323 Synrad J48-1S CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm) Power Supply
Click to Enlarge) Product ID# C114323 This lot comes with everything shown. Including a Synrad J48-1S-11234 Carbon Dioxide Laser(10W, 10.57-10.63µm, mfd. 4/11/99) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 7"H. Please ask questions or indicate concerns prior to bidding. ... moreBy placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and C
|
|
|
C114324 Synrad J48-1 CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm), Power Supply
Click to Enlarge) Product ID# C114324 This lot comes with everything shown. Including a Synrad J48-1S-11061 Carbon Dioxide Laser(10W, 10.57-10.63µm, mfd. 3/15/99) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. The key has actually broken off inside the lock of the laser, but you can still turn it off and on using the rest of the key or a flat blade screwdriver. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they ... moreare being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 7"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are fina
|
|
|
C114326 Synrad J48-1 CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm), Power Supply
Click to Enlarge) Product ID# C114326 This lot comes with everything shown. Including a Synrad J48-1-9009Carbon Dioxide Laser(10W, 10.57-10.63µm, mfd. 7/7/98) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 7"H. Please ask questions or indicate concerns prior to bidding. ... moreBy placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canad
|
|
|
C114328 Synrad G48-1-28W CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm) w/ Power
Click to Enlarge) Product ID# C114328 This lot comes with everything shown. Including a Synrad G48-1-28W 3737 Carbon Dioxide Laser(10W, 10.57-10.63µm, mfd. 7/16/96) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 7"H. Please ask questions or indicate concerns prior to ... morebidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and
|
|
|
C114329 Synrad J48-1 CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm), Power Supply
Click to Enlarge) Product ID# C114329 This lot comes with everything shown. Including a Synrad J48-1-11073 Carbon Dioxide Laser(10W, 10.57-10.63µm, mfd. 3/16/99) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 7"H. Please ask questions or indicate concerns prior to bidding. ... moreBy placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Ca
|
|
|
C113973 Synrad 1148-1-5497 CO2 Carbon Dioxide Laser (10W) w/ Power Supply
Click to Enlarge) Product ID# C113973 This lot comes with everything shown. Including a Synrad 1148-1-5497 Carbon Dioxide Laser(10W, mfd. 9/4/97) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 8"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. ... moreYou agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addres
|
|
|
C114325 Synrad J48-1 CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm) - burns wood!
Click to Enlarge) Product ID# C114325 This lot comes with everything shown. Including a Synrad J48-1 Carbon Dioxide Laser(10W, 10.57-10.63µm, mfd. 10/26/00, s/n 0481300006062) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but unlike the other Synrad lasers that I have posted, this one actually emits a laser beam. As I was testing/photographing it, but wood background behind my photo table started smoking, and the laser burned some small black holes in the wood. I turned it off shortly after. This is the ... moreextent of my testing of these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 10"W x 7"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be as
|
|
|
Bystronic 4400 Watt CO2 Laser
FOR ALL INQUIRIES PLEASE CALL TREVOR@ 817.247.7336 YEAR: 2004 Model: Bystar 4025 CONTROL: BYSTRONIC Table size: 8' x 20' MAXIMUM LASER OUTPUT: 4400 WATTS MAXIMUM STEEL THICKNESS: MILD STEEL: 1" STAINLESS STEEL: 0.8" ALUMINUM: 0.5" NOMINAL SHEET SIZE: 256" x 100" CUTTING RANGE: X-AXIS: 256" Y-AXIS: 100" Z-AXIS: 6.7" MAXIMUM POSITIONING SPEED PARALLEL AXIS X-Y: 2.365 IPM MAXIMUM POSITIONING SIMULTANEOUS: 3,346 IPM MAXIMUM AXIS ACCELERATION: 120 IPS POSITIONING ACCURACY PA* +- 0.004" REPEATABILITY PS* +- 0.002" EDGE DETECTION PRECISION: +- 0.002" REPETITION ACCURACY OF CUTTING TABLE-DURING REPOSITIONING: +- 0.008" MAXIMUM WORKPIECE WEIGHT: 7.065 LBS MACHINE WEIGHT: 70.600 LBS EQUIPPED WITH: BYSTRONIC WINDOWS BASED CONTROL AUTO PALLET SHUTTLE 1) 5" CUTTING HEAD 1) 7.5" ... moreCUTTING HEAD CHILLER DUST COLLECTOR ALL AVAILABLE MANUALS. All equipment is sold“as is” with no warranty either written or implied. All specifications. Accessories, standard or optional, are approximate. It is the Buyer’s responsibility to make a thorough inspection for verification ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14bc2bfe375-0x10f-
|
|
|
Universal Lasers Systems X-600 UL-50 Watt Co2 Laser Engraving Machine
Universal Lasers Systems X-600 UL-50 Watt Co2 Laser Engraving Machine. Comes with a 2.0 lens. Auto focus, a red dot pointer and a cutting table. This machine was purchased and put into service in early 2003 as a husband and wife start up business out of our home. It was placed out of service late in 2005 due to a divorce. The machine saw very little use in those two years. It has been stored in my basement ever since. The cartridge is out of gas and needs to be recharged. You can have this done by ordering a new cartridge from Universal Laser Systems Incorporated for the cost of $1.200.00. The rest of the machine is mint as the day it arrived at my door. You will have to arrange pick up at my place of residence in Oshkosh. Wisconsin. The machine is stored in my basement and you will need a minimum of three men to move it straight up the stairs ... moreinto my attached garage. Please do not hesitate to contact me if you have questions. Concerns or to schedule an appointment to inspect the machine.
|
|
|
COHERENT EXELASE 35 PLUS CO2 LASER HEAD + RF POWER SUPPLY (10600nm)
Up for auction: Coherent Excelase 35 Plus CO2 laser System. Was pulled working. Has been stored. Not tested and condition unknown. Sold as is" only. Includes: CO2 Laser Head RF shielded cable RF exciter power supply Courtesy reminder: Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in rejection on all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. The buyer is responsible for the shipping cost of a replacement tube after 14 days of receiving. Condition: Good cosmetic condition with some signs of previous use(See photos for more detail) Tested: Unit is not tested. Please review our page for all of our Term and Conditions below before bidding or purchasing. By bidding or purchasing ... moreour merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be re-listed at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) If you have any questions. Please contact us through Ebay. WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equip
|
|
|
PSI LP-60 CO2 Laser
This is a light duty pulsed CO2 laser. Per the manual. It will supply a train of pulses@ ~250 mjoules max. at ~ 8 HZ. It is a class III-b, not a class IV laser, which is a much reduced safety hazard. It is not a substitute for trophy shop CW scanning lasers. It is a flowing gas laser, not a sealed tube type, which is why I bought it. For convenience, it runs on wall current(115V, 60 Hz) and is air cooled, making it an excellent choice for light applications, science project, and hobby work. My intentions were for fine drilling for miniature electronic circuit prototypes and sculpting wax and plastic masters for subsequent casting in metal. Neither use materialized, so the unit is now for sale. The manual is included and gives complete instructions for setup, operation, maintenance, troubleshooting and adjustment. A vacuum pump, gas supply, ... moreand vacuum gauge(none included) are required to run. Physical size is ~ 40" X 14" X 6" Weight is ~ 60 lb. I am not an equipment dealer, selling only what is not in present or planned use and do not offer refunds or accept returns. Item is offered on an as is, where is basis. Local pickup is encouraged; Crating is available at a modest cost, but insurance and shipping are the sole responsibility of the buyer, although seller will provide reasonable physical assistance to shipper. Any other conditions by written agreement only.
|
|
|
Power One DC Power Supply for Coherent Co2 Laser 48v 52 amps 208-380 3 phase
UP FOR AUCTION Power One DC Power Supply 48 Volts 52 amps 3 phase input 208/380 Unit was removed from a working Coherent Diamond G laser Free shipping to the lower 48 United States with a Buy-It-Now
|
|
|
Pre-Owned (Used) 15-Watt CO2 CO 2 Surgical Veterinary Vet Laser Cutting Edge CEL
Normal 0 false false false EN-US JA X-NONE Includes: Laser. Arm, 1) Handpiece, power cord, interlock, key and manual. And a 30-day replacement or repair warranty from delivery date. According to the manufacturer: Better Patient Care for Every Practice The Cutting Edge 15-Watt CO2 Veterinary Laser System represents a revolution in veterinary surgery by delivering a full-featured laser system in a compact. Affordable design. Now practices of all sizes can offer the highest standards of care to their patients, and enjoy the associated increased profits. Laser energy seals nerve endings and small blood vessels as it incises or ablates tissue. Reducing bleeding, swelling and post-operative pain. The 15-Watt system is designed to provide the veterinary surgeon with maximum flexibility and precision, resulting in better surgery, healthier patients, ... moreand satisfied clients. Premium Technology in an Affordable Table Top System The 15-Watt CO2 Laser System features articulated arm technology. Delivering true laser beam efficiency to the surgical site while minimizing damage to surrounding tissues. A diode-aiming beam illuminates the targeted incision or ablation site before and during operation, increasing user accuracy and confidence. Liquid cooled operation and self-calibration features reduce set up and maintenance time. And completely autoclavable handpieces eliminate the need for costly consumable tips. The 15-Watt CO2 Laser System delivers laser energy in Continuous Wave and Super Pulse modes. Both included as standard features. The system is configured to include all the necessary tools for nearly all soft tissue surgery applications. Six Essential Components of a Quality CO2 Laser System Our team of laser specialists and veterinary surgeons designed the Cutting Edge 15-Watt Laser System to incorporate those features deemed critical to providing safe. Precise and cost-effective laser surgery in the veterinary hospital Articulated Arm By assuring 100% beam integrity. An articulated arm delivery system provides dramat
|
|
|
COHERENT CO2 XANAR AMBULASE SYSTEM 2 - LASER HEAD & RF EXCITER POWER SUPPLY
Up for auction: Coherent Xanar Ambulase System 2 l aser head and supply. These units are sold as parts machines. As is only. They are untested and may need work. It is however possible they may function. This auction is for quantity one(1) Wavelength: 10600nm Power: 15 ~ 20W Tested: Unit is not tested. Please review our page for all of our Term and Conditions below before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be re-listed at our discretion. PAYMENT INFORMATION: Payments are expected ... morein a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) If you have any questions. Please contact us through Ebay. WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been modified or altered. We maintain the right to use our discretion when choosing between a replacement or refund. 30-day Warranty: When an item carries a 30-day warranty. You have 30-days to contact us for a replacement or refund for a defective product. We can not warranty compatibility with your equipment, or warranty items that have been modified or altered. RETURNS: NOTE: Original sh
|
|
|
Coherent Protected Gold Laser Optic Mirror & Mounting MM-2 Co2 Erbium Yag
This is a 1 inch diameter gold laser mirror with a mounting similar to a MM-2. It was used with an erbium laser originally. But since it is a gold mirror, it will work from red through the mid IR band, even 1064nm CO2 laser light. This is a nice optic. I have lots of lasers and other unique stuff for sale this week. Just a heads up, several people notified me of trouble bidding near the end of listings, to avoid this disappointment, if you actually NEED this item either bid what you think it's worth early, or Buy it now outright. Many of the items i sell are extremely unique and several of them when they are gone, they are sold out for good. Thank you for looking at my auctions!
|
|
|
40W Laser Tube Power supply CO2, 220VAC - FREE SHIP
DESCRIPTION: This is a. This is a great chance to save. What is shown is what will be shipped. Thanks for looking at my item. Please check all pictures carefully as they are part of the description. PAYMENT: Buy It Now requires immediate payment. Ga residents add 6% tax. DOMESTIC SHIPPING: I will ship within 48 hours(Normally 24) unless it is a weekend. I ship Monday through Friday. I only ship to the lower 48 states. I only ship to confirmed paypal addresses. RETURNS: I will accept returns on this item within 14 days of delivery. Buyer pays return shipping. Bid or Purchase Responsibly! I describe every item as best I can. If you feel like an item has been misrepresented, please contact me FIRST with any problems. QUESTIONS: Feel free to ask questions. Please ask them before purchasing. Thank you. Posted with a;06d2.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14be8c56eb7-0x106-
|
|
|
Laser Optic Filter Positioning Stage Mount Use with Co2 Yag DPSS
Laser Optic Filter Positioning Stage Mount This item is used. It is fully functional. It has a laser filter of some type installed. The filter has scratches. Will accommodate a 25.5mm round optic. Over all size: about 4" x 5" This item weighs 20 ounces. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14beb22ce6c-0x114-
|
|
|
C113794 Synrad J48-1 CO2 Carbon Dioxide Laser (10W, 10.57-10.63µm), Power Supply
Click to Enlarge) Product ID# C113794 This lot comes with everything shown. Including a Synrad J48-1 Carbon Dioxide Laser(10W, 10.57-10.63µm) a Power-One DC Power Supply, a Calex Triple Power Supply, a Ray Merrill Laser Stabilization Circuit, and a small digital display. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. The laser powers up, and the power light illuminates, and after a few seconds the"Laze" light comes on as well, but I don't see any evidence that it is actually emitting a laser beam. I lack the knowledge and equipment to formally test these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 8"W x 5"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. ... moreYou agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 58 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 16 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addres
|
|
|
1998 Mitsubishi LXP-2512 CO2 Laser with ML3020D 2K Watt Resonator - For Parts
We have a Used not working Mitsubishi LXP 2515 CO2 Laser. The laser stopped working due to a failed control unit; we started to replace boards and decided not to put any more into the machine. Last operation in early Q4 of 2014. Up to that point the machine worked properly. We have replaced the need for this laser but are willing to sell parts off the laser or the entire system minus the dust collector and chiller. Let me know what parts you may be interested in. Notice the chiller and dust collector are NOT for sale. The total price includes the tables. Non working control unit and resonator. The buyer is responsible for freight. The machine will be going to the scrap yard if not purchased; we will entertain all offers. Mitsubishi CNC LASER Machine No.See Photos. Year: 1998 Model: LXP-2512 Capacity: 2000 Watt. 4' x 8' Travels, Flying ... moreOptic, Mitsubishi 32 Bit CNC Controls Machine Specifications MAXIMUM LASER CAPACITY 2000 WATT MAXIMUM Y AXIS TRAVEL 98" MAXIMUM X AXIS TRAVEL 49" NUMBER OF TABLES 2 TYPE OF CNC CONTROL MITSUBISHI 32 BIT- NOT FUNCTIONING* LOCATION: Machine is located in Matamoros. Tamps Mexico but everything would be made for pickup in Brownsville, TX at the buyers expense.
|
|
|
Honeywell CO2 Laser Infrared Protective Goggles
The GPT Flex Seal laser goggle has an indirect ventilation system that enhances comfort and minimizes fogging. Fits over prescription glasses. Comfortable to wear. Offers full wraparound protection without limiting visibility. Adjustable headband. Includes microfiber cleaning cloth and storage case Filter: Polymer 100- CO2 Visible Luminous Transmission: 89% Optical Density@ Wavelength: Greater Than9@ 190-360nm Color: Clear Coatings: Anti-fog. Anti-scratch Standards: ANSI Z87.1-2003. ANSI Z136.1-2007 Recommended For: Medical. Manufacturing, Laboratory Very lightly used. That said. The headband may have some very slight stains from wearing. ONLY USED ON ONE OCCASION. NO SCRATCHES OR DINGS IN LENS OR FRAME.
|
|
|
KWC Tactical Wolverine Black Ops Co2 430 FPS Airsoft Pistol w/ Laser Sight
Pros: Muzzle Velocity: 430 FPS Free Laser Light(could be a con) Non-Blowback(could be a con) Accurate at over 100 ft Full Metal 15 Round Clip Co2 Gun Cons: Laser light isn't very accurate Alan Wrench to access Co2 is missing Bit Heavy g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14c0ac1099a-0xfb-
|
|
|
Lumenis Micromanipulator Acuspot 712 CO2 Laser Microsurgery Front Panel
You are bidding on Lumenis Micromanipulator Acuspot 712 CO2 Laser Microsurgery Front Panel Great Condition! Sold as is. See pictures My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international ... morebuyer. NOTE for Israeli buyers: The price does not include V.A.T. Please contact us for shipping + V.A.T. SHIPPING Shipping options: Registered. EMS, UPS, FedEx, DHL Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within up to 3 business days after receiving the payment from the buyer. Register- Buyer usually receive the item within 11-23 business days. EMS- Buyer usually receive the item within 4-8 business days. UPS. FedEx, DHL- Buyer usually receive the item within 2-4 business days. It all depends on the Post office and custom. If you haven't receive your item within 30 business days after making the payment please contact us immediately. Please feel free to
|
|
 |