|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$1000.00 Shipping Condition: Used Location: North Miami Beach, United States 2022 Lutronic Clarity II Alexandrite Nd:Yag Laser System.The system only had 1 previous owner and is in great working condition. We are not affiliated ... morewith the manufacturer.
Buy It Now
Free Shipping Condition: Used Location: Valdosta, United States See pictures. Excellent condition, mostly used BBL.
Buy It Now
Free Shipping Condition: Used Location: Valdosta, United States See pictures. Excellent condition. Was very infrequently used. Most work done with BBL.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG IRIDECTOMY.
Buy It Now
$25.00 Shipping Condition: Used Location: Eureka, United States
Buy It Now
$15.00 Shipping Condition: New Location: Ukraine INP3-7/80A has a filter coating, cuts off the ultraviolet part of the spectrum. INP3-7/80A (ИНП3-7/80А) Tube Laser Pumping Flash. The duration of the ... morehalf-wave maximum ignition pulse at the level of 0.1 of the peak value (0.5-5)s.
Buy It Now
$15.00 Shipping Condition: New Location: Ukraine Filling - xenon. Ignition - external. Cooling - natural and liquid.Flow rate 5-8 Litres/min at an inlet temperature of not more than 20 degrees. The light ... moreoutput in the direction perpendicular to the lamp from 1800 to 2500 Kds.
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Manufacturer: Lutronic. Model: Spectra. FORCE MAJEURE. (b)Special Order Product. MRP reserves the right to modify or revoke any credit previously extended. ... more(d)Exclusions. (b)Prohibited Acts. ACCEPTANCE; INSPECTION.
Buy It Now
Free Shipping Condition: New Location: China Coating S1: T@808m>95%, R@1342, 671nm>99.8%. 1.1%: YAG, 3x3x2mm. 1.1%: YAG, 3x3x7mm. Nd: YV0/2/532. 1%Nd: YV04, 3x3x2mm a -cut. 2.1%Nd: YV0/3/532. 1%Nd: ... moreYV04, 3x3x3mm a-cut. 8%Nd: YV0/3/532.
Buy It Now
Free Shipping Condition: New Location: Park City, United States Manufacturer: Lutronic. LIMITATION OF LIABILITY. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED. MRP reserves the right to modify or revoke any credit ... morepreviously extended. FORCE MAJEURE. - (x1) Wide Spot Distance Gauge Tip.
Buy It Now
Free Shipping Condition: New Location: Park City, United States Manufacturer: Lutronic. LIMITATION OF LIABILITY. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED. MRP reserves the right to modify or revoke any credit ... morepreviously extended. FORCE MAJEURE. - Qty: 1 - Wide Spot Distance Gauge Tip.
Buy It Now
$4.00 Shipping Condition: New Location: Chicago, United States Overview of Thorlabs Nd:YAG Mirrors. Thorlabs NB1-K04. Nd:YAG Mirror, 0° to 45° AOI. :YAG lasers. Five Dielectric Nd:YAG Coatings Available. Nd:YAG Laser ... moreLine Mirrors. K04 262 - 266 nm. λ/10, 262 - 266 nm.
Buy It Now
Free Shipping Condition: New Location: Park City, United States Nd:YAG - Frequency Doubled Nd:YAG - KTP. MRP Laser Operator Eyewear. FORCE MAJEURE. MRP reserves the right to modify or revoke any credit previously extended. ... moreSafety Specifications (d)Exclusions.
Buy It Now
$44.99 Shipping Condition: Used Location: Houston, United States Model: Nd:YAG. MPN: Nd:YAG. Unit Type: Unit. LOT OF 2 - Schneider Electric Module Modicon TSX Micro TSXASZ200 Analog output. LOT OF 4 - ALLEN BRADLEY ... more1771-IAD/D 120V DC/AC 50/60Hz MODULE. LOT(2)-1746-NO4I Allen Bradley SLC 500 Analog Current Output Module 1746-N04I.
Buy It Now
$8.30 Shipping Condition: Used Location: Tyler, United States Not sure exactly what this is but it is in great shape and acts as a beam splitter through output and one of the small ports on the bottom. As seen in ... morephotos, if additional photos are wanted I can get them.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG IRIDECTOMY.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States Model: Nordlys. Manufacturer: Candela. MRP reserves the right to modify or revoke any credit previously extended. (d)Exclusions. FORCE MAJEURE. (b)Prohibited ... moreActs. ORDER OF PRECEDENCE. (b)Special Order Product.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States Nd:YAG KTP 532 1064 . - UV400 Pre-Owned. Model Number: UV400 1110 #39. ALMA Laser Safety Glasses. 190-534nm +960-1064nm OD7+. MRP reserves the right to ... moremodify or revoke any credit previously extended.
Buy It Now
$1400.00 Shipping Condition: Seller refurbished Location: Addison, United States 2011 Quanta Q-Plus T (Q Plus C)- Recently Refurbished! Service Contracts Available! 3 x 3 Handpiece. 4 x 4 Handpiece. Expert Suppliers - Here to Serve ... moreYou.
Buy It Now
Free Shipping Condition: New Location: Hillsboro, United States Ocular Instruments OAYA Abraham Capsulotomy YAG Laser Lens. Used. But excellent condition. Box has light dings and scratches, but hinges are strong and ... moreclasp works perfectly. Label has light writing on it. Retails new $450.00 Description: Stabilizes the patient's eye and minimizes the possibility of pitting the IOL during Nd:YAG laser capsulotomy. A 10mm diameter. 66D magnifying button in the center of the lens enhances visualization and allows precise laser focus on the posterior capsule.
Buy It Now
Free Shipping Condition: New Location: China Nonlinear crystal: 532KTP. KTP, II type phase matching θ = 90 θ=23.5 °, Z- 45 °. Used for 1064m frequency doubling to generate 532mn.
Buy It Now
$18.40 Shipping Condition: For parts or not working Location: Jacksonville Beach, United States I am unable to test its working condition due to my machine this connects to stopped working due to a broken fan. So I do not know if this item is in ... moreworking order or not.
Buy It Now
Free Shipping Condition: New Location: Ukraine Nd:Glass - Instead of a crystal, an amorphous glass is used as the substrate. IFP-800 Impulse Ruby Laser Nd:YAG Pumping Flash or DIY Xenon Lamp tube Ruby. ... moreIf you choosed option with flash tubes refractive index Pd : 1,520.
$6.00 Shipping Condition: Used Location: Hialeah, United States . The specifications include the following:- BBL with all filters and SkinTyte (420, 515, 560, 590, 640, 695, SkinTyte)- BBL Spot adapters (7mm round, ... more11mm round, 15mm square, Smoothie)- Er:YAG 2,940nm with MLP scanner and Pro Fractional hand pieces- Nd:YAG 1,064nm with hair removal scanner and spot hand pieces (vascular)- 1064 External chiller- Comprehensive clinical training on-site with all clinical protocols- Marketing resources including point of sale patient education brochures, floor banner, consultation binder, and digital marketing resources such as before and after photos and social media graphics.
Buy It Now
$10.40 Shipping Condition: Used Location: Alviso, United States Crystal oven assembly made for use in Laserscope KTP/532 laser systems. It also has water cooling so that the temperature can be maintained at 140C even ... morewhen the laser is running at high power levels.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States P/N: OP-EN-05 Rev.5. Nobleen Long pulsed Alexandrite & Nd: YAG Laser System. (b)Prohibited Acts. One Manual with the following topics The Industry leader ... morein New and. Type: Manual. MRP reserves the right to modify or revoke any credit previously extended.
$12.00 Shipping Condition: Used Location: Citrus Heights, United States Professional Nd:YAG laser rod, 4mm dia. x 80 mm length, flat - flat ends, (picture #1). One end is AR coated, the other one looks as having a reflective ... moremirror coating. Very good optical quality, see pictures #2, #3, in transmission.
Buy It Now
Free Shipping Condition: Used Location: Cleveland, United States You are purchasing a Reflectors Cavity with enclosure Gold Nd YAG Marking Cutting Engraving.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG Iridectomy. This lens is used for YAG laser iridectomy procedures. The +30 D Lens Condenses the Laser Energy.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG IRIDECTOMY.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG IRIDECTOMY.
Buy It Now
$10.40 Shipping Condition: New – Open box Location: Saint Petersburg, United States Oems include lee laser, laser applications, ceo, and others.
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Cutera CoolGlide Excel Nd:YAG Laser Handpiece Parts Unit. Compatible System(s): CoolGlide Excel. - Model: CoolGlide Excel Nd:YAG. - Mfr: Cutera. Manufacturer: ... moreCutera. - Desc: Nd:YAG Handpiece. MRP reserves the right to modify or revoke any credit previously extended.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : YAG:max. Wavelength: 1064 nm. ( Monitor Mode). C-mount lens. your account number during checkout. More Information SKU# SB-080881. 25 MHz data ... moreclock.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States Mfr: Sciton Lasers. Manufacturer: Sciton. - Desc: Handpiece - 5mm @ 2.94ulm / 8mm @ 1.05ulm. FORCE MAJEURE. Model Number: 5mm_8mm_Handpiece. MRP reserves ... morethe right to modify or revoke any credit previously extended.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States The Candela GentleMAX Laser System is actually a combination of two of Candela’s most popular models, the GentleLASE and GentleYAG. Model: GentleMax. ... moreGentleMax System. Model Number: GentleMax. Yag: 95544.
Buy It Now
Condition: Used Location: Concord, United States Most laser lipo systems operate with just a single wavelength, but the Palomar SlimLipo has wavelengths of 924 nm and 975 nm that can be used independently ... moreor together to produce faster and more effective results than comparable systems.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India
Buy It Now
$59.00 Shipping Condition: Used Location: North Hollywood, United States Lumenis Holmium Nd YAG Versapulse(IP68) Laser pulse Footswitch .. A statement that the item has been cleaned and handled in accordance with the manufacturer's ... moreinstructionsA copy of the following statement:"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Buy It Now
Free Shipping Condition: Used Location: Park City, United States MRP reserves the right to modify or revoke any credit previously extended. LIMITATION OF LIABILITY. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED. FORCE ... moreMAJEURE. - Desc: Sapphire Crystal Light Guide - 2mm x 4mm.
Buy It Now
$4.99 Shipping Condition: New – Open box Location: Mountain View, United States Custom mounted Nd:YAG rod, 3.5 mm dia. Sold As Is.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States Model: SapphireCool. FORCE MAJEURE. (d)Exclusions. (b)Prohibited Acts. MRP reserves the right to modify or revoke any credit previously extended. LIMITATION ... moreOF LIABILITY. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States Mfr: Fotona. Manufacturer: Fotona. P/N: 86850. Model Number: 86850. Model: SP Dynamis. (d)Exclusions. MRP reserves the right to modify or revoke any credit ... morepreviously extended. LIMITATION OF LIABILITY.
Buy It Now
Free Shipping Condition: New Location: Crown Point, United States
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Model: Xeo. Manufacturer: Cutera. Tech Notes: Tec Bad. FORCE MAJEURE. LIMITATION OF LIABILITY. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED. MRP reserves ... morethe right to modify or revoke any credit previously extended.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States Mfr: Ellman Sandstone. Manufacturer: Ellman. Q-Switched Nd:YAG Handpiece Instruction Manual. - Desc: Q-Switched Nd:YAG Handpiece Instruction Manual. MRP ... morereserves the right to modify or revoke any credit previously extended.
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Manufacturer: Cynosure. Model: Palomar. Palomar Q-YAG5 Interface Board PCB Motherboard. Desc: Interface Board. MRP reserves the right to modify or revoke ... moreany credit previously extended. LIMITATION OF LIABILITY.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States OD7+ @ >750-1064nm. Mfr: Cynosure. Manufacturer: Cynosure. Lens: Mustard Yellow. Safety Specs MRP reserves the right to modify or revoke any credit previously ... moreextended. FORCE MAJEURE. ACCEPTANCE; INSPECTION.
Buy It Now
$13.99 Shipping Condition: Used Location: Kill Devil Hills, United States For sale- anAir Spaced Half Wave Fresnel Rhomb Prism Device as pictured. But Iwas calling it was a Twin Crystal Laser Attenuator, Prism?. At this users ... morerequest I pulled the piece out and ascertained that in fact the prism assembly could be rotated and it can.
Buy It Now
$11.60 Shipping Condition: Used Location: Salt Lake City, United States Lumenis Laser Multi Spot Nd YAG SapphireCool Light Guide Set KT-1048770. Look like they are flawless.
Buy It Now
$300.00 Shipping Condition: Used Location: Minneapolis, United States Make: Aerolase. Model: Lightpod V650 ~ vascular lesions. Includes: Lightpod V650. Notes from the MFG: The LightPod V650 improves upon the gold-standard ... moredevices for vascular lesions by. Equivalent to the newer Neo Elite at a fraction of the price.
Buy It Now
$9.00 Shipping Condition: New Location: Lawrence, United States Newport 11Q00HP.2 Thin Film Polarizer, High-Energy Nd:YAG, UVFS, 14.3 x 28.6 mm, 355 nm.
Buy It Now
$10.40 Shipping Condition: New – Open box Location: Saint Petersburg, United States Oems include lee laser, laser applications, ceo, and others.
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Model: Xeo. Manufacturer: Cutera. LIMITATION OF LIABILITY. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED. Tech Notes: Tec Bad. FORCE MAJEURE. MRP reserves ... morethe right to modify or revoke any credit previously extended.
Buy It Now
Free Shipping Condition: Used Location: Park City, United States MotusAY Moveo Handpiece. Model: MotusAY. 2021 DEKA MotusAY System. MotusAY 755nm Fiber. MotusAY 1064nm Fiber. MotusAY Mast. MotusAY Spot Sizes Manufacturer: ... moreDEKA.
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Manufacturer: Hoya ConBio. Manufacturer: ConBio. MRP reserves the right to modify or revoke any credit previously extended. 2-8mm Adjustable 532nm & 1064nm ... morehandpiece. (d)Exclusions. LIMITATION OF LIABILITY.
Buy It Now
Free Shipping Condition: For parts or not working Location: Park City, United States Part Number: KT6794000. Model Number: KT6794000. MRP reserves the right to modify or revoke any credit previously extended. LIMITATION OF LIABILITY. IT ... moreIS AGREED THAT MRP’S LIABILITY IS SO LIMITED.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG Iridectomy. This lens is used for YAG laser iridectomy procedures. The +30 D Lens Condenses the Laser Energy.
Buy It Now
Free Shipping Condition: New Location: Subzi Mandi S.O, India YAG IRIDECTOMY.
|
|
|
|
Quanta Ray DCR nd:YAG Laser 1.0µm .5W Laser
Quanta Ray DCR nd:YAG Laser 1.0µm.5W Laser Product Description PLEASE READ CAREFULLY! Up for bid is a Quanta Ray DCR nd:YAG Laser 1.0µm.5W Laser. This unit is untested and in good physical condition. Includes a DCR Remote Control. DCR Controller Interface, Cooling Unit/Power Supply and keys to open the power supply unit and for use of the laser. Please refer to the pictures and bid accordingly. Thanks. We offer this auction in"As Is" condition. Sunnking ships freight out-bound items using a variety of carriers to give you, the customer, the best possible rate. We do NOT allow customers to send their own carriers in for pickup. Please do not ask. INTERNATIONAL BIDDERS. Shipping outside of the United States is expensive with UPS(our exclusive carrier) We do not use USPS under any circumstances. International bidders please ... morebe aware that UPS charges COD brokerage fees based on the final value of the eBay item being imported. These charges are the buyer’s responsibility and are not covered under the stated shipping and handling charge. Please contact UPS for more information about brokerage fees. Click an Image to Enlarge Need an extra power cord? VGA cord? DVI cord? or other cables/wires? WE SELL THEM! Include one with your purchase to take advantage of combined shipping discounts. If you think this is a HOT DEAL check out Sunnking's other items up for auction. Click. To add Sunnking to your favorite sellers list. Click. Freight Shipping Information Shipping Weight: 613 lbs. The following link will take you to page so that you can get a ROUGH estimate of your Freight shipping charges. Actual rates may vary due to specific buyer requirements. Packing requirements, changes in the freight classification, location or liftgate services. Please. To enter the freight quote website and obtain your rate quote. You may be asked to log in. If you are, the user name is quote and the password is 1234. Once you are on the freight quote page you will need to enter your address, the item classification which
|
|
|
Lumenis Coherent Nd Yag 1064 KTP 532 Reflector Pickoff Assembly
Lumenis Coherent Nd Yag 1064 KTP 532 Reflector Pickoff Assembly I think this is from a Lumenis Selecta II laser. It has been previously installed. The mirrors. Optics and such look nice. All aluminum construction. Has a fully adjustable mirror mounted on the top that deflects a beam from the left down through the hole to the bottom. from the bottom you add your own mirror to bring the beam back up to be deflected to the right.
|
|
|
Quantel International SF406-04 Dual Flashlamp Nd:Yag Laser Head
I bought a load of equipment from a research company about 4 years ago because there were some optical components and equipment I needed. On the 4 x 8 ft optical table I bought were some nd:yag heads. This research company doesn't sell surplus complete laser systems for liability reasons. So they just cut the cable to the head(s) no power supply/controller) The company operated this unit for me before disconnecting the power supply. This head was a test unit for aligning the setup. This head is a Quantel International model# SF406-04 Dual Flashlamp Nd:Yag Head. Approx. overall Dim’s are(not including cooling connections) 3.5"Wx 6.5 L x 3 H This Item is being Sold"AS– IS" Will Ship Within The Continental U.S. ONLY! Shipping by USPS Priority Mail Included. For payment I accept PayPal. Payment must be received within 3 days ... moreof the auction close.
|
|
|
Beam splitter cube prism for 1064nm YAG, DPSS, ND:YvO4
Nice pristine Beam splitter cube cemented to stainless and aluminum mount. I was told this was removed from a large Yag laser and the coatings appear too be for I.R. Cube is about 3/4" x 3/4" I will ship it with the top 2" of black aluminum post. It is bolted to a heavy 6" tall mount that is not necessary. I do not know if it is polarized or not. Thanks for looking
|
|
|
Lumonics HY400 scientific pulsed Nd:YAG laser system 1064 nm WORKS video
Lumonics pulsed Nd:YAG laser system/ model HY400/ 1064 nm/ manufactured June 1994/ 208 volt. Single phase, 60 Hz power required/ rated 400 mj per pulse/ Laser system was recently tested and upon start-up, lamp may not simmer. During these tests, it took a maximum of 2-3 re-starts to get the lamp to simmer(dirty contactor? When the lamp does trigger, system was measured over spec. power(see video) Includes laser head, power supply, controller, and manual/ Manual does have schematics that may help repair the trigger problem. System is being sold in as-is, where-is, tested operational condition(as per above description) with no returns/ buyer is responsible for all shipping and insurance charges. Please feel free to contact us with any further questions. Note: Please contact us for payment options.
|
|
|
Nd:YAG + HeNe/Diode Mirror 1 inch diameter
This auction is for a 1 inch diameter by 6mm thick dual wavelength laser mirror. It is designed to be a high reflector of both Nd:YAG lasers at 1064nm as well as an aiming beam of either HeNe or laser diodes in the range 630-670nm. It is designed for use at 45 degrees angle of incidence. It has a guaranteed reflectivity of 99.5 percent for the YAG. And greater than 80 percent for the red(or greater than 95 percent if s-pol) It is made of BK7 optical glass, and is flat to lambda/10, with 10-5 surface quality. Damage threshold is 1 megawatt/cm2, or 5 joules/cm2 for a 10ns pulse. The original price from Coherent for this mirror was $235.00. And this optic is new in the box! SAVE! This optic is brand new in the original container. As you probably know. Coherent manufactures some of the best quality optics around, and you won't be disappointed ... morewith this optic. Be sure to visit my Ebay store. Cheap-Optics, for lots more great deals on mirros,optics, Newport stuff, and other optical mounts. Just search the store using the search or categories on the left side, and find lots of great deals on optics and mounts. Payment by Paypal is preferred. But also cashier's check or money order. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
New Wave Research Nd:YAG SHG pulsed q-switch laser 532nm 8mJ
Here for sale is a used Nd:YAG pulsed green laser by New Wave Research. Max energy output is 8mJ at 6ns pulse length. 532nm. Max repetition is 10Hz. Polaris III laser controller can be controlled via RS232 and Windows based factory applet. Alternatively it can be used with hard wired potentiometers for frequency. PFN voltage and so on. Addidtionally external control can be used by use BNC inputs on the back. Laser head is water cooled(deionized) This system is running fine. Energy from pulse to pulse is consistent. Feel free to ask questions and make reasonable offers. Shipping worldwide at actual cost.
|
|
|
Spectra Physics 808nm 18W Laser Diode Nd:Yag DPSS With Fiber Cable / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Spectra Physics 808nm 18W Laser Diode Nd:Yag DPSS With Fiber Cable/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Spectra Physics 808nm 18W Laser Diode Nd:Yag DPSS With Fiber Cable/ Warranty Used Condition Removed from unused Medical Laser System Spectra Physics/ Laserscope Fiber Coupled FcBar Laser Diode Module With Fiber Optic Cable Spectra Physics BWA-Series 808nm 18W Nd:Yag DPSS Fiber Diode Pump Laser Part No. 1140-808-18-02A Wavelength: 808nm Rated Power: 18W With 3-Ft/ 36" Fiber Optic Cable" Attention Buyers" The sale of this item may be subject to regulation ... moreby the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. By listing in this category. You certify that you will comply with all such laws. Our Information: 1) Business name: USTechStore Inc. 2) City and State of Business: San Jose. CA. 3) Type of Business: Liquidation 4) Contact No: 408-292-5295 If you have questions about legal obligations regarding sales of medical devices. You should consult with the FDA's Center for Devices and Radiological Health: Links: http:www.fda.gov/cdrh/devadvice/ or http:www.fda.gov/cdrh/industry/support/index.html Phone number: 800.638.2041 email: dsmica@cdrh.fda.gov Note: Please also note that all Medical Devices and Equipments should be inspected. Certified and calibrated by a certified technician or an authorized center before using and we as a liquidator are not responsible for any use or abuse of such devices. INV# 12M71633-3-13 Item Condition Used Condition Actual Picture of the item is provided. What you see
|
|
|
Cooper Laser Sonics Analog Interface Board for Cooper Vision 2500 Nd:Yag Laser
Used Cooper Lser Sonics Analog Interface Board for Cooper Vision 2500 Nd:Yag Laser. It was removed from working laser, but I sell as is no returns International byers please contact me first and I will send you a shipping quote. If you have some questions contact me before bidding. No returns!
|
|
|
Cubit CPU Board Model 6500 for Nd:Yag Laser Cooper Vision 2500
Used Cubit CPU Board Model 6500 for Cooper Vision 2500 Nd:Yag Laser. It was removed from working laser, but I sell as is no returns International byers please contact me first and I will send you a shipping quote. If you have some questions contact me before bidding. No returns!
|
|
|
Cooper Laser Sonics Display Interface Board for Cooper Vision 2500 Nd:Yag Laser
Used Coopr Laser Sonics Display Interface Board Model ASSY 0100-0427 for Cooper Vision 2500 Nd:Yag Laser. It was removed from working laser, but I sell as is no returns International byers please contact me first and I will send you a shipping quote. If you have some questions contact me before bidding. No returns!
|
|
|
Alcon Display Interface Board for Alcon 2500 Nd:Yag Laser
Used Alcon Display Interface Board Model ASSY 0100-0427 for Alcon 2500 Nd:Yag Laser. It was removed from working laser, but I sell as is no returns International byers please contact me first and I will send you a shipping quote. If you have some questions contact me before bidding. No returns!
|
|
|
Cooper Vision 2500 Nd:Yag Laser Front Panel
Used Cooper Vision 2500 Nd:Yag Laser Front Panel. In very good cosmetic condition was removed from working laser, but I sell as is no returns International byers please contact me first and I will send you a shipping quote. If you have some questions contact me before bidding. No returns!
|
|
|
Alcon 2500 Nd:Yag Laser Front Panel LE Series
Used Alcon 2500 Nd:Yag Laser Front Panel LE Series. In very good cosmetic condition was removed from working laser, but I sell as is no returns International byers please contact me first and I will send you a shipping quote. If you have some questions contact me before bidding. No returns! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f846a2065-0xfd-
|
|
|
Alcon Interconnect Board for ND:Yag Laser Alcon 2500
Used Alcon Interconnect Board for ND:Yag Laser Alcon 2500. Was removed from working unit but I am selling as is, no returns! International buyers please contact me for a shipping charges before bidding
|
|
|
Cooper Vision Interconnect Board for ND:Yag Laser Cooper Vision 2500
Used Cooper Vision Interconnect Board for ND:Yag Laser Cooper Vision 2500. Was removed from working unit but I am selling as is, no returns! International buyers please contact me for a shipping charges before bidding
|
|
|
Coherent Nd: Yag Laser Head and Trigger Pulsed 1064 nm 450v
High Quality Nd:YAG Laser module Removed from a Selecta II Laser This unit consists of a UV filter Trigger board Nd: Yag Rod, Flash lamp- Output Coupler Rear reflector Passive Q-Switch The Optics are glued to precision X-Y adjustable mounts. Printed on the side of this laser is model# 0634-720-01 Mfg Date November 2002 The trigger board is NEW Not positive if this unit works or not.
|
|
|
Coherent Nd Yag Rod & Spectralon Reflector Cavity
This is a used Nd:Yag cavity with rod The white reflector is made of Spactralon. The rod size is: 53.00mm x 3.0mm The rod has some burn pits in the coating. No lamp
|
|
|
Ellex Nd Yag Laser Attenuator Module Selecta Duet
Lumenis Attenuator module for the Selecta Duet surgical laser. The wave plate has a serious burn in it and needs to be replaced.
|
|
|
Continuum Surelite Pulsed Nd:YAG Laser W/OPO 1064 532 355nm Working Video
Continuum Surelite pulsed Nd:YAG laser system/ Model SLI-20/ Manufactured 12/03/ 20Hz rep rate/ Equipped with second and third harmonic generators/ 532nm: Rated 160 mJ@ 20 Hz/ 355nm: Rated 55/65mJ@ 20Hz/ Also includes Continuum Surelite OPO model SLOPO/ Manufactured 12/03/ Requires 200-240V. 50/60Hz, single phase power/ Unit is being sold in as-is, where-is, tested operational, as described above condition with no returns/ Buyer is responsible for all shipping and insurance charges. Please feel free to contact us with any further questions. Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fe7f58560-0x101-
|
|
|
Spectra Physics/Quanta Ray GCR 250 pulsed doubled Nd:YAG laser 1064 532 working
Spectra Physics/Quanta Ray GCR 200 series pulsed doubled Nd:YAG laser/ Model GCR 250/ Manufactured 1996/ Rated 1100 mJ/pulse@ 1064 nm at 30Hz rep rate. 8-9 ns pulse width and 550 mJ/pulse@ 532 nm at 30Hz rep rate, 6-7 ns pulse width/ This system has been tested and is operational to manufacturer's output specification/ Requires 220 volt, single phase, 50/60 Hz power/ Unit is being sold in as-is, where-is, tested operational, as described above condition with no returns/ Buyer is responsible for all shipping and insurance charges. Please feel free to contact us with any further questions/ Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options.
|
|
|
Ekspla PL2143A Picosecond Nd:YAG Laser and LaserVision OPG/OPA 50mJ ~30 ps 1064
Ekspla Picosecond Nd:YAG Laser System/ Model PL2143A/ 1064 nm/ Rated 50 mJ per pulse/ ~30 ps pulse duration/ 10Hz rep rate/ Requires 200-240VAC. 50/60Hz, single phase power/ Includes LaserVision OPG/OPA/ Model Custom/ We believe OPG/OPA was converted to LiInS2 instead of KTA in the OPA stage/ Have not fully tested system so for now it is listed as parts. Unit is being sold in as-is, where-is, as described above condition with no returns/ Buyer is responsible for all shipping and insurance charges. Please feel free to contact us with any further questions/ Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options.
|
|
|
Quantel SPA-1 Harmonic Generator Nd:Yag Spectra-Physics
We have for sale in this auction a Quantel SPA-1 Harmonic Generator by Quatel International. It is set@ 115V with fuse 115V@ 4 amp and 230V@ 2 amp with the test area dimensions of(21 x 12) and the whole unit at(24 x 12 x 11 high) with wt. of 40 lbs. This unit is complete but untested and just as shown in the photos and will be sold AS_IS. The item will be shipped in a creat with foam. On a skid with shipping cost according to its final destination. Thank you and have a Blessed day. If any questions. Please fell free to call. PS: Please click the scroll down photos to enlarge the item. WE do accept University PO’s from all major Colleges and Universities in the USA. ONLY! Please call today for an official quotation. All other sales must be prepaid. For more information. Please fell free to call or e-mail. Thank you and have a great day.
|
|
|
Quantel/Continuum Nd:Yag Laser Cap? High Voltage/Flashlamp Attachment
Quantel/Continuum Nd:Yag Laser Cap For sale- a Quantel/Continuum Nd:Yag Laser part. I don’t know exactly what to call it. In fact I don’t know for certain that it is a Quantel or a Continuum piece either since it has absolutely no markings on it. But I have bought and sold a few Quantel/Continuum pieces. And the Nd:YAG laser module in them had a cap on it just like this and the connection pins for the power supply are the same. So I feel pretty certain that it is a Quantel/Continuum piece. What I can’t say is what model it fits. They seem to have a number of Nd:YAG engines for 6, 7, 8, and 9mm rods, and that’s just what I have seen personally. Maybe there are other sizes as well. This piece was loose in a box with a number of unrelated items. I have no way to test it and NO warranty is offered. However. IF you pay the asking price and find ... moreit has a problem you cannot live with within 14 days of receipt you may return it. Returns are ONLY allowed on Buy It Now Purchases. Accepted Best Offers are strictly an as is sale. No returns allowed. But since there may be fit/application questions that can only be answered with the piece in hand. On this item I will allow a return within 24 hours of receipt regardless of what you pay. Return would be for a refund of the purchase price. Not including shipping costs. Just so that we are clear on that. This is an item that has not been thoroughly tested. As such it may work fine or it may have problems. So any purchase entails a certain degree of risk. If you Buy It Now your risk is limited to the shipping costs both ways. If you submit an offer you do so knowing that you cannot return it(after 24 hours as noted) In either case it is up to you to decide whether the risk level is acceptable to you. And if not you need to pass on this particular item. Please check out my for more interesting lab. Test, and optical equipment. Check back often! Sold as is. As described, as pictured. Potential buyers are asked to please make sure you have read the listing carefully. And understan
|
|
|
High Power Laser Head Cavity + ROD ND:YAG 1064 nm ~8 mm+ ARC Flash Lamp + Mirror
High Power Laser Head Cavity + ROD ND:YAG 1064 nm ~8 mm+ ARC Flash Lamp + Mirror You are bidding on Used: High Power Laser Head Cavity + ROD ND:YAG 1064 nm + ARC Flash Lamp + Mirror Lumenis WATER COOLED Laser ND:YAG 1064 nm Diameter of Rod: ~8 mm Length of Rod: ~11.1 cm/ 4.370" ROD looks clear without a scratch! Length of ARC Lamp: ~14cm/ 5.511" Diameter of the ARC Lamp: 6mm Base size: 127.8 mm(length of the metal cavity body) This unit is from the Lumenis ONE Multi-Spot Nd:YAG handle! For specifications: This item is for SALE AS IS. My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution ... morecenter/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post
|
|
|
Nd:YAG Turning Mirror in Optical Mount 1.064 micron
You are bidding on a new CVI Laser 1 inch. 45-degree high-reflecting turning mirror. This is a high power mirror used, for example, in between stages of a Nd:YAG oscillator-amplifier system. The mirror is cemented(with RTV) into a removable ring in a mirror mount(Quantel/Continuum style) Mirror is undamaged, never used. New price is over $200. Two identical mirrors/mounts are available. Take a look at our 100% positive feedback. We won't steer you wrong, and be sure to look at our other items.
|
|
|
Coherent Antares 76-YLF 76-S CW Nd Yag Laser
Coherent Antares 76-YLF 76-S CW Nd Yag Laser Used as shown in the photographs. This laser requires 3 Phase 240V power which we do not have at our current location so we are unable to test the laser. The sticker on the side of the laser head reads 100W. It is complete with power supply as shown and cooling system as shown. Also has a Crystal Technology AOQ Switch Driver. Again. We have not tested this laser. It is being sold as-is, as pictured. All pictures contained in this auction are of the actual item up for auction. Click on the pictures to enlarge them to full size. Contact information: Our contact information will be provided to the high bidder upon auction completion including our address and phone number. If you are having email problems. It is possible that our email is being stopped by your spam filter. Make sure you check your ... moreebay registered email. Our software, Ebay's Blackthorne Pro uses your ebay registered email address for communication not Ebay messaging. If you cannot locate the email from us, use ebays"Find Contact Information" on the Advanced Search page to get our phone number so you can call us to let us know you are having a problem receiving email. We are available Monday, Wednesday and Friday for phone calls. This is an internet based business, so the majority of our communication will be done through email and ebay messaging. Payment: We accept payment through PayPal from US and Canadian account holders with a confirmed PayPal address. We do not accept international PayPal so do not ask and do not assume that we will. Again PayPal payments must have a confirmed address. We will only ship to your confirmed PayPal address. Again. We do not accept international PayPal All California residents will be charged 8.75% sales tax. Payment must be received within 7 days of the time you receive you total including shipping. Shipping: We ship within the United States and Canada only. We do not ship to PO boxes including APO/FPO. Upon request. And with the understanding that we do not
|
|
|
Coherent Diode Laser Cavity Nd YAG & KTP Cooling and Fiber Port
This is a Lumenis Laser diode Cavity ND Yag And KTP Cooling& Fiber Port"IN GREAT CONDITION" I would of took the top off of the Cavity and show you inside but the label suggest not to break the seal so I left it as is. But this is in wonderful condition. Don't forget about(FREE SHIPPING)
|
|
|
Nd Yag laser Parts Cavity, Spectralon Reflector, Trigger boards, Lamp
You get what you see in the pictures. For parts or repair. Thanks!
|
|
|
Spectra Physics GCR-4 Laser Power Supply Nd:Yag
Spectra Physics GCR-4 Laser Power Supply For sale is this used Spectra Physics GCR-4 Laser Power Supply. I believe it is for a Nd:Yag diode laser. It is overall in pretty decent cosmetic condition with the normal scuffs and scratches on the exterior. The biggest issues are that the connection to the laser has been cut off. And that the key was broken off in switch keyhole. The rest of the key is included. And seems to turn it still. I have not tested out the power supply. Will be sold completely as-is. Power supply specs: Brand: Spectra Physics Model: GCR-4 Manufactured: N21430 Date: October 1990 S/N: 4-178 Power requirements: 220V 1-Phase 30A Exterior dimensions: 35" x 22" x 42" tall Not for sale outside of the US. Freight calculator Enter your zip code Select a delivery location Select a delivery location Business with a ... moredock or forklift Business without a dock or forklift Residential or limited access Tradeshow or convention Construction site Get quotes Rates are subject to change based on time of calculation and data entered. ©2011. All rights reserved. This item will require freight shipping or local pick up at our facility in Christiansburg. VA 24073. The freight calculator below will show your shipping charges. We will add $40 for palletizing the item. This includes strapping it to a skid and wrapping with stretchwrap as well as cardboard and bubblewrap if it needs it. Should you wish to schedule your own freight shipping. We will only charge the palletizing fee. The freight calculator will ask for your Zip and a description of your delivery location. To save on shipping. Shipments can be picked up at a freight terminal for the same price as a business shipment w/ dock. If the shipment needs to be brought inside by the carrier(not including loading dock) give us a call for a quote. If you have any questions give us a call at 540-381-3011 or shoot us an e-mail through ebay. Please note: Schools& Churches are generally considered limited access or residential. Also. Shipments will gen
|
|
|
CONTINUUM SURELITE SLI-10 Nd:YAG Laser System (05/01)
Continuum&169 Surelite SLI-10 Nd:YAG Laser System ex-R&D and fully Tested Laser Head(LH) Power Control Unit(PCU) PCU Internals Surelite is the most imitated Nd:YAG laser design in the industry. At the heart of each Continuum laser system is a very high efficiency pump chamber to couple the flashlamp light into the Nd:YAG rod. Through the use of a diffuse reflector concept. Continuum is able to produce high gain with low heat buildup in the overall system. The result is superior beam quality and excellent passive beam pointing stability without costly active locking technologies used by other companies. This laser system was last used in an R&D application prior to storage in 08/2009. Both the PCU and Laser head were tested for functionality and lasing on 09/2012. The unit is in excellent condition and is being sold"AS IS" ... moreBoth the LH and PCU has undergone routine maintenance in its tenure with only a"LASER ON" LED. Keyswitch and internal cooling hoses having been recently replaced. References from owners of previously sold refurbished continuum lasers are available upon request. The following items are included as part of the Laser Unit; SLI-10 LH& PCU. Crystal Heater PCB(Internal to LH) Surelite Harmonic Doubler(SLD) Assembly&8224. External Interlock Dongle. COMMS& Earth Extension cable/s(2m) IEC 4180/4192 Power lead(2m) Single-shot cable assembly(1m) Documentation. 8224 Note: No BBO crystal contained in SLD Assembly. Upon request. I'll be happy to provide you a full shipping and handling quote. Please provide the state, destination city& postal code. System will be packed in a secure treated pine crate L x W x H(mm) 870 x 500 x 550 at a cost of ~AUD354. Photos are available on request. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Example: Cost for Shipping to Sydney. Australia ~AUD350. International bidders ar
|
|
|
CONTINUUM SURELITE SLI-20 Nd:YAG Laser System (05/01)
Continuum&169 Surelite SLI-20 Nd:YAG Laser System ex-R&D and fully Tested Laser Head(LH) Power Control Unit(PCU) PCU Internals Surelite is the most imitated Nd:YAG laser design in the industry. At the heart of each Continuum laser system is a very high efficiency pump chamber to couple the flashlamp light into the Nd:YAG rod. Through the use of a diffuse reflector concept. Continuum is able to produce high gain with low heat buildup in the overall system. The result is superior beam quality and excellent passive beam pointing stability without costly active locking technologies used by other companies. This laser system was last used in an R&D application prior to storage in 08/2009. Both the PCU and Laser head were tested for functionality and lasing on 09/2012. The unit is in excellent condition and is being sold"AS IS" ... moreBoth the LH and PCU has undergone routine maintenance in its tenure with only a"LASER ON" LED. Keyswitch and internal cooling hoses having been recently replaced. References from owners of previously sold refurbished continuum lasers are available upon request. The following items are included as part of the Laser Unit; SLI-20 LH& PCU. Crystal Heater PCB(Internal to LH) Surelite Harmonic Doubler(SLD) Assembly&8224. External Interlock Dongle. COMMS& Earth Extension cable/s(2m) IEC 4180/4192 Power lead(2m) Single-shot cable assembly(1m) Documentation. 8224 Note: No BBO crystal contained in SLD Assembly. Upon request. I'll be happy to provide you a full shipping and handling quote. Please provide the state, destination city& postal code. System will be packed in a secure treated pine crate L x W x H(mm) 870 x 500 x 550 at a cost of ~357. Photos are available on request. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Example: Cost for Shipping to Sydney. Australia ~AUD370. International bidders are w
|
|
|
Therma Wave Bandpass Filter Coherent Optical Laser Part HR at 1064nm Nd:YAG
LAST ONE! This item is a DPSS q-switch pulse protector mirror type bandpass filter. It passes 808nm and shorter and reflects 1064nm highly at 45 degrees. It was to be used to protect the laser diode from q-switched pulses being back directed into the diode pump fiber. It is designed for end pumped DPSS lasers. And could also be used to remove the pump light leftover from the DPSS beam and bend the 1064nm beam 90 degrees. I have lots of laser and other unique stuff for sale this week.
|
|
|
Coherent Nd: Yag High Power Ophthalmic Laser Head
This is a used laser head. The output coupler had some dust on it and was burnt as a result. This laser is air cooled. This laser contains a flash lamp. Passive q-switch, and Nd:Yag rod. This laser needs to be repaired with a new output coupler. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1443e8e9dbf-0xd3-
|
|
|
Small Aluminum High Power Nd:YAG or Ruby Laser Resonator Optical Frame Assembly
This is a precision machined aluminum laser resonator. The original laser in it was a small Nd:YAG laser with rotating prism/mirror type q-switch. The resonator assembly is about 60mm long by 39mm wide x 25mm thick. It was originally part of some kind of range-finder This item is quite difficult to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Continuum Lasers minilite-II Nd:YAG
Lightly used minilite-II laser. Complete and in excellent working condition. Second-harmonic generator installed. Used in a laboratory environment for only a few hours. Has original shipping container and protective goggles. Will ship only to USA.
|
|
|
Used ND:YAG Ophtalmic Laser Head 1064nm
Item description: Used ND:YAG Laser Head. Used for last 7 years. Pulled out from working Ophtalmic YAG laser surgery system due to energy decreasement during working(40% reduction after 500 shots) Item specifications: Type: YAG WaveLength: 1064nm Mode Structure: Fundamental Cooling: Air Pulse duration: 4 ns Mode of operation: Q-switched Shipping: I ship word wide with registered airmail. Usually it takes 10- 23 business days. Payment: I accept PayPal only.
|
|
|
ND:YAG Laser Line Mirror 50mm Dia. 532nm 45* NT 47-157
Type Single Band. Diameter(mm) 50.00. Diameter Tolerance(mm) +0.0/0.2. Clear Aperture( 90. Thickness(mm) 10.0. Thickness Tolerance(mm) ±0.2. Surface Accuracy(λ) 1/10@ 632.8nm. Surface Quality 10-5. Parallelism(arcminutes) Substrate Fused Silica. Angle of Incidence(°) 45. Reflection( 99.8 Absolute@ DWL. 98 Average within Wavelength Range. Design Wavelength DWL(nm) 532.00. Wavelength(nm) 510-560. Damage Threshold. Pulsed(J/cm2@ 20ns) 20. Back Surface Ground.
|
|
|
Coastal Optical YAG:Nd Optical Collimator Beam Expander
This listing is for Coastal Optical YAG:Nd Optical Collimator/ Beam Expander. This is short focus laser beam collimator for high power Q-switched YAG:Nd laser. The entering aperture is 12mm and the focal length is 10mm with 40mm output clear aperture. The optics and coatings are in immaculate condition. Low opening bid with No Reserve! Please ask questions before bidding and bid only if you know what you are bidding for. Due to the nature of product it is sold as is with no return. Item is massive(all stainless steel) Worldwide Expedited shipping is $26.95. Payment is due within 3 days. Buyer is responsible for all local taxes and customs fees whenever applicable. Note: The ruler is for demonstrative purposes and NOT INCLUDED with this lot! Please check out my other items! and thanks for looking
|
|
|
RARE High Power Coherent 561nm Yellow Green Nd:Yag KTP Laser Diode Optics Set
This is a main crystal set 1x Nd:yag. And 1x KTP for up to ONE WATT of yellow-green Nd:YAG laser light at 561nm. This wavelength is used in certain biomedical applications and is very close to the human visual peak at 555nm. The color would be very nice and exotic to use for laser light show uses. This crystal set is extremely expensive and almost impossible to find. You need to supply the cavity OC and HR optic mirrors, but they should be easily found from large DPSS optic suppliers. See also my Spectra Physics millennia cable that would make diode pumping the crystal to saturation a simple task. You could also make it lamp pumped with a photo flash tube from a disposable camera if high peak power is needed. Even low power 561nm lasers sell for over 3 grand, so getting these parts may be a good option for a university lab that needs this ... morewavelength. I got one of these crystal sets lasing at very low power using a cludge of ex-telecom optics and most of the guts of a Uniphase nanolaser. SORRY- MY HOME BUILT CHARTREUSE GREEN LASER IS NOT FOR SALE, it was used to show the color comparison to 532nm. See the difference in beam color compared to a cheap 532nm pointer. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Coherent Nd:Yag High Energy Fused Silica Beam Expander Collimator Lens Optic
This is a fused silica lens for the intracavity collimator telescope of a UV pulsed 3rd or fourth harmonic Nd:yag laser. It tested to work OK with other lasers like XeCl. And nitrogen lasers too. The lens is 1.1 inch diameter with a short focal length. I have lots of laser and other unique stuff for sale this week. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1455e8f00c6-0x11b-
|
|
|
Litton Nd:YAG Gold Plated 4 sides 4x4x7 mm
Normal 0 MicrosoftInternetExplorer4 Litton Nd:YAG Gold Plated 4 sides4x4x7 mm The device is returnable if it is in the exact same condition as it was at shipment time.
|
|
|
Litton Airtron large Nd:YAG Slab DPSS 1064nm 532nm 108.9mm AR coated ends
Litton Airtron Nd:YAG laser crystal slab. This auction is for the pink colored one shown. Unknown dopant% I have the two shown available. see my other auctions for the Erbium laser green colored one. They are the same dimensions. Specs on box are: 108.9mm long and 5x12mm. 49.3* There is an AR coating on the ends. Gold color. From what I have read. These can be side or end pumped. This slab has one defect. a small scratch shown by the red arrow. This should not hinder it's function. Otherwise it's very clean. Thanks for looking
|
|
|
2008 Ekspla Picosecond Pulsed Nd:YAG Laser System SL 334 Self Seeding 1064,532nm
Ekspla Picosecond Pulsed Nd:YAG Laser System/ Model SL 334/ Self Seeding/ 1064nm. 532nm/ mfd. Mar. 2008/ max. pulse energy: 500 mJ@ 1064 nm, 240 mJ@ 532 nm/ pulse duration@ 1064 nm: 150±20 ps/ rep. rate: 5 Hz/ beam diameter: ~12 mm/ excellent condition Unit is being sold in as-is. Where-is, as described above condition with no returns. Buyer is responsible for all shipping and insurance charges. Please feel free to contact us with any further questions. Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options.
|
|
|
Inrad Fourth Harmonic Generator FHG 266nm for High Power Nd:YAG 1064nm
This listing is for Used Inrad Fourth Harmonic Generator FHG for High Power Nd:YAG 1064nm laser. It gives deep UV 266nm output and features 13.5x13.5mm front surface crystal mounted inside the oven with 12mm clear aperture. The oven has two wedged windows with both sides AR coatings to seal and protect the crystal inside. This is Type I Fourth harmonic generator specifically created for very high power pulse lasers. The item is in excellent fully working condition. Please ask questions before bidding. Due to the nature of product it is sold as is with no return! Worldwide expedited shipping is $24.95. Payment is due within 3 days. Buyer is responsible for all local taxes and customs fees whenever applicable. Please note: the listing is for crystal only! All other auxillary items shown at the pictures are for demonstration purposes and NOT ... moreINCLUDED with this lot. Please check out my other items! and thanks for looking
|
|
|
Quantel Third Harmonic Generator THG-T30, 355nm for High Power Nd:YAG 1064nm
This listing is for Used Quantel Third Harmonic Generator 355nm for High Power Nd:YAG 1064nm laser. It gives UVA 355nm output and features Deuterated Potassium Dihydrophosphate(KD*P) crystal 13.5x13.5x30mm mounted inside the oven with 12mm clear aperture. The oven has two wedged windows with both sides AR coatings to seal and protect the crystal inside. This third harmonic generator specifically created for very high power pulse lasers where BBO crystals just optically damaged by intense pulse laser radiation. The item is in excellent condition and fully functional. Please ask questions before bidding. Due to the nature of product it is sold as is with no return! Worldwide expedited shipping is $24.95. Payment is due within 3 days. Buyer is responsible for all local taxes and customs fees whenever applicable. Please note: the listing is for ... morecrystal only! All other auxillary items shown at the pictures are for demonstration purposes and NOT INCLUDED with this lot. Please check out my other items! and thanks for looking.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14593071c30-0x10d-
|
|
|
Inrad 532nm Second Harmonic Generator SHG for High Power Nd:YAG 1064nm
This listing is for Used Inrad Second Harmonic Generator for High Power Nd:YAG 1064nm laser. It gives green 532nm output and features Deuterated Potassium Dihydrophosphate(KD*P) crystal 13.5x13.5x30mm mounted inside the oven with 12mm clear aperture. The oven has two wedged windows with both sides AR coatings to seal and protect the crystal inside. This is Type II second harmonic generator(EOO type interaction) specifically created for very high power pulse lasers where KTP or BBO crystals just optically damaged by intense pulse laser radiation. Please ask questions before bidding. Due to the nature of product it is sold as is with no return! Worldwide expedited shipping is $24.95. Payment is due within 3 days. Buyer is responsible for all local taxes and customs fees whenever applicable. Please note: the listing is for crystal only! All ... moreother auxillary items shown at the pictures are for demonstration purposes and NOT INCLUDED with this lot. Please check out my other items! and thanks for looking
|
|
|
Trumpf VMC1 Vectormark Compact Laser Nd:Yag 1064nm Head Engraving Class IV
Trumpf Vectormark VC1 Laser Head Military surplus Trumpf Vectormark laser head is marked Model VC1. Which the Trumpf website lists as Nd:Yag 1064. Label on side reads: Max Output: 15W Pulse Duration: Wavelength: 1064nm/ 633nm Class IV Laser Product Attached hose contains numerous connector cables and ends in a metal plate that is meant to be attached to a larger part of a Vectormark system. We opened the side with the electronics to photograph it. Clean inside and as shown. The screw heads securing the casing on the laser side of the unit have red paint in the grooves which has not been marred by a screwdriver. So it looks like that side has not been opened since the paint was laid down. We're going to leave it that way, as well. Very clean. Cosmetically near new appearance. We've had questions about working condition, but do not ... morehave the equipment or knowledge to test. We are going to assume that the unit is non-functioning. Selling as-is, for parts or repair. No returns. Unit comes as shown. No accessories. Other parts, software or manuals. ANY REQUIRED REPAIRS OR NEEDED PARTS ARE THE RESPONSIBILITY OF THE BUYER We're estimating 75 lbs. shipping weight. It may be less. SHIPPING and SALES POLICIES Freight or local pick up. If going by freight. Unit will be delivered to professional 3rd-party crating service and we will pay for the crating(usually $150-$200) The service we use for large delicate instrumentation like this does an excellent job, and typically requires 3-4 business days. They also take detailed photos of the item before sealing the crate. In the event an insurance claim needs to be filed. It's possible. Depending on the finished size of the crate, that the unit will still be eligible for UPS pickup. Freight location has loading dock. Cash only for local pickups. Please contact us for detailed information. If you have any questions. Please email us before purchase. PayPal is the accepted payment method, expected within 3 days. By purchasing unit. Buyer agrees to the terms given in thi
|
|
|
Coherent Laserscope Green Light Show 80W Nd:Yag Laser Cesium Doped KTP Crystal
This is a large 4x4x7mm KTP crystal for the Coherent/laserscope Greenlight systems. These systems can run at about 80 watts of 532nm output. And since the beam focuses inside the crystal, it is a common part to fail. The cesium doping makes these crystals far less likely to gray track than non-doped or hydrothermal grown crystals. If you are using these lasers for light show display, you should get yourself a spare KTP so you can change it out yourself in a half hour or so. That way, a KTP going bad will not be a literal show stopper. I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power DPSS Nd:YAG Spectra Physics SMA Laser RF AOM Q-switch Cable
This is a nice cable assembly for the RF q-switch units on spectra physics lasers. It also works well for crystal technology AOM units as well. Keep in mind this is a power rated cable. Not the small signal cable so common on ebay. Length of this cable is just about 1 foot measured from each connector. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Coherent Nd:Yag Laser KTP Crystal Oven Translation Stage Mechanical Assembly
This is a nicely made precision translation stage for moving a KTP or other nonlinear crystal oven assembly like those found in Verdi or Avia lasers. This item allows you to jog a crystal over a bit when the coating gets damaged after several hundreds of hours of use. It allows you to get the most use out of your expensive nonlinear crystal set. It has a X and Bragg angle adjustment. Overall size is about 40x40x13mm I have lots of lasers and other unique stuff for sale this week.
|
|
|
JDS Uniphase Dpss Nd:Yag Laser Resonator IR Optics Assembly 946nm Blue 473nm
This is a resonator/crystal assembly for a 946nm Yag laser. The intra-cavity flux is available making it useful for Raman spectroscopy and such. It has the YVO4 optical crystals and the OC mirror. It needs to be pumped with a few watts to work. It makes about 50mw or so of output with 3 watts in. As a blue laser with an added LBO it will make over 150mw of blue light. It comes on a nifty TEC cooled mounting with a thermistor feedback. If you need this odd wavelength YVO4 DPSS laser. This is what you want. I have lots of laser and other unique stuff for sale this week.
|
|
|
Quantum Technoloy Inc ND:YAG Second Harmonic Generation Crystal D-CDA Huge
Normal 0 MicrosoftInternetExplorer4 Quantum Technoloy Inc ND:YAG Second Harmonic Generation Crystal D-CDA Huge Aperature Do to the sensitive nature of this device it is is not returnable
|
|
|
Newport 2" Mirror 20QM20EM.10 Excimer Nd:Yag 248nm @ 0° NRC High Energy Laser
Newport 2" Diameter High Energy Excimer Laser Mirror Military lab surplus mirror looks new. Possibly never used. Model No. 20QM20EM.10. High Energy Excimer Laser Mirror. 50.8 mm Diameter, 0°, 248nm. Fused silica substrate. 2 available. Both look near new. Possibly never used. Paper labels on boxes show wear. FREE SHIPPING Via priority mail with delivery confirmation and insurance within the U.S. International bidders welcome. But will be charged actual postage, shipping first class international. Our Sales Policies Money Back. Minus shipping, if not satisfied. International sales are"As-Is. If you have any questions, please email us before purchase. We package carefully and ship quickly. PayPal is the accepted payment method, expected within 3 days. International Buyers– Please Note: Import duties. Taxes, and charges are not ... moreincluded in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not alter customs forms to reflect a different purchase price. Terms and conditions of sale: All items are sold as is. With no warranty or guarantee implied or intended by the seller or the auctioneer, other than money back, if applicable. It is recommended the buyer make every effort to confirm item descriptions to their satisfaction before bidding on or purchasing any item. Seller is not responsible for how items are handled, used, or operated upon sale. Once the item is declared sold it becomes the responsibility of the buyer with all liabilities attached thereto. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146c6943f7d-0x10c-
|
|
|
Trumpf Vectormark Compact Laser Nd:Yag VMC1 Head Engraving ~ Parts/Repair
Trumpf Vectormark VC1 Laser Head Mouse over photos to zoom in for detail. We opened and photographed both sides of the unit. Military surplus Trumpf Vectormark laser head is marked Model VC1. Which the Trumpf website lists as Nd:Yag 1064. Label on side reads: Max Output: 15W Pulse Duration: Wavelength: 1064nm/ 633nm Class IV Laser Product Attached hose contains numerous connector cables and ends in a metal plate that is meant to be attached to a larger part of a Vectormark system. On one side. The screws securing the casing had undisturbed red paint in the grooves, indicating that the case hadn't been opened since the paint was laid down. We decided to open and photograph both sides. Interior is pristine. With a clear enclosure protecting the laser side. Exterior in overall very clean, cosmetically near new appearance. We have no way ... moreof testing the unit, so we're going to assume it needs work and are selling it as-is, for parts or repair. If we knew that it worked, the price would be closer to $6K. No returns. Unit comes as shown. No accessories. Other parts, software or manuals. ANY REQUIRED REPAIRS OR NEEDED PARTS ARE THE RESPONSIBILITY OF THE BUYER SHIPPING and SALES POLICIES We're estimating 75 lbs. shipping weight. Unit will be delivered to professional 3rd-party packaging service. The service we use for large delicate instrumentation like this does an excellent job. And typically requires 3-4 business days. We will pay the $80 they charge for packing an item of this size. Local pickup is available, as is wooden crating if desired(extra charges apply) Cash only for local pickups. Please contact us for more detailed information. If you have any questions. Please email us before purchase. PayPal is the accepted payment method, expected within 3 days. By purchasing unit. Buyer agrees to the terms given in this listing. Terms and conditions of sale: All items are sold as is. With no warranty or guarantee implied or intended by the seller or the auctioneer. It is recomm
|
|
|
Continuum Nd:YAG Long Pulse Laser .
For sale Continuum Nd:YAG Long Pulse Laser. unit was remove from a laser system. Clean super condition, the flash lamp houseing model is 811U-06.
|
|
|
Collimator Coupler SMA Fiber Optic ND:YAG 1064nm Laser + Failsafe Limit switches
Please read carefully before bidding You are bidding on Collimator Coupler SMA Fiber Optic. Taken from ND:YAG 1064nm Laser system. The unit has TWO failsafe limit switches. Mrror diameter: 0.7" ~. EXCELLENT CONDITION! See Pictures. Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please noted we are working 6 days ... morea weak between: 5:00AM(GMT) 14:30(GMT) Sunday throw Friday. PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive your item within 2
|
|
|
NEWPORT 10QM20HDM.15 HIGH ENERGY ND: YAG LASER MIRROR 25.4MM DIAMETER WITH MOUNT
YOU ARE BUYING ONE NEWPORT 10QM20HDM.15 HIGH ENERGY ND: YAG LASER MIRROR 25.4MM DIAMETER 6.35 MM 45 DEGREE 1064& 532 NM WITH MOUNT. THIS IS USED SURPLUS REMOVED FROM A NEWPORT SOLARY X1600 SCRIBING SYSTEM REMOVED FROM A SHUTDOWN ABOUND SOLAR FACILITY AND IS GUARANTEED IN GOOD CONDITION. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPWSQ X4) ESTIMATED RETAIL PRICE $305.00 THE FOLLOWING IS INFORMATION FROM THE MANUFACTURE AND IS NOT INCLUDED IN THIS LISTING: The 10QM20HDM.15 High-Energy Nd:YAG Laser Mirror is manufactured using high purity fused silica substrates and ultrahard dielectric coatings. This 25.4 mm diameter mirror has been tested and certified to withstand high-energy pulses and has a high damage threshold. Meticulous production procedures guarantee they will withstand fluences greater ... morethan 10 J/cm2 at 1064 nm. The coating is highly durable and will withstand repeated cleaning. This dual-wavelength for 1064 and 532 nm Nd:YAG mirror has a 45° incidence angle. Reflectivity is greater than 99.7% for s-polarization and greater than 99% for p-polarization. Model 10QM20HDM.15 Mirror Shape, Round, Type, High Energy Nd:Yag Laser Mirror, Diameter, 1.0 in. 25.4 mm) Coating Type, 532 and 1064 nm(Ultra-hard Dielectric) Material, UV grade fused silica, Thickness, 0.25 in. 6.35 mm) Surface Quality, 10-5 scratch-dig, Coating Code, HDM.15, Wavelength Range, 532 and 1064 nm, Clear Aperture, ≥central 80% of diameter, Reflectivity, R s 99.7% R p 99% 1064 and 532 nm, Angle of Incidence, 45°, Surface Flatness, ≤λ/10 at 632.8 nm over the clear aperture, Chamfers, 0.25–0.76 mm face width, Chamfers Angle/Tolerance, 45° ±15°, Diameter Tolerance, +0/0.25 mm, Thickness Tolerance, ±0.5 mm, Wedge, ≤3 arc min, Damage Threshold, 3 KW/cm² CW and 5 J/cm²@ 532 nm. 10 nsec pulses, Cleaning, Non-abrasive method. Acetone or isopropyl alcohol on lens tissue recommended, International Buyers Please Note: Import duties. Taxes and charges are not included in
|
|
|
Spectron pulsed Nd:YAG laser system model SL 805G
Spectron pulsed Nd:YAG laser system/ model SL 805G(Gaussian resonator) includes: second harmonic generator 532 nm/ also includes: SL 4000 G dye laser with circulator. Missing controller. Otherwise, dye laser seems to be complete. System was manufactured in 1997. 220V, single phase power required/ Tested, operational producing 1100 mJ combined 1064 nm& 532 nm@ 10 Hz and 400 mJ 532 nm only@ 10 Hz with a 10-12 ns pulse width/ System is being sold in as-is, where-is condition. Buyer is responsible for all shipping and insurance charges. Feel free to contact us with any further questions. Note: Please contact us for payment options.
|
|
|
Coherent Lumenis Intense Pulsed Laser Aperture Treatment Head SA2439000-A ND YAG
What You'll get: Coherent Lumenis Intense Pulsed Laser Aperture Treatment Head SA2439000-A ND YAG ASSY 151897 Other Accessories that are Not pictured or mentioned under"What You'll Get" are Not included Please visit our eBay Store for more similar items! Testing: Pulled from a working environment. Tested to power up. Unit is in full working condition with no problems. Guaranteed Working! Cosmetics: Pictures are representative of what you will receive. Please See pictures for cosmetics. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. ... moreI Global 635 N Eckhoff Orange. CA 92868 949-331-9434 Policies& Definitions: Shipping Most items ship out within 1-2 BUSINESS days after the payment clears. We allow local pick up. Handling fee of $9.99 and CA tax will apply. We combine shipping to save you money if the items can be combined and shipped safely. We offer a combined shipping discount of $3 for each additional item purchased. Free shipping offers do NOT apply to Puerto Rico. Alaska, Hawaii and international transactions Definitions: GUARANTEED WORKING MEANS: The item is guaranteed working as long as we receive it back within 30 days from the purchase date. We will replace the item at no additional cost if the item is DOA. If replacement is Not available. We will refund the purchase price. Please bid accordingly. AS-IS MEANS: The item is sold AS-IS Where is. This means that the buyer acknowledges that the item may or may Not be working and that the item may or may Not be complete and the buyer is willing to accept the risk. Please bid accordingly. Shipping and handling cost is Not refundable under any circumstances and the buyer is responsible for any additional shipping cost. please bid accordingly. Return Policy
|
|
|
High Energy Nd:Yag CO2 Laser Mode Limiting Aperatures Gold Plated Lot of 42
This is a tray of 42 gold plated mode limiting aperatures. These aperatures are made of some sort of tungsten copper alloy that is gold plated with a small hole. Each part is 11x5x1.5mm with a.75mm hole in it. I was told they were designed to limit the mode of CO2 or Nd:Yag lasers for use with a q-switch. They are very precision made parts. I have lots of lasers and other unique stuff for sale this week.
|
|
|
New Wave Research High Power Nd Yag Laser Q-switch Crystal & RF Module Driver
This is a complete RF AO q-switch unit with crystal and driver unit. The price cannot be beat for this quality item! The RF driver module needs 24 to 28V. Grounded 0V to enable, and 5V TTL square wave(falling edge) to fire. The unit has a very nice clean q-switch crystal with a 5mm aperture included. This q-switch is the easiest to use unit i've ever seen by far. I recommend replacing the white firing wire with coax if using in an electrically noisy environment. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Lumenis Vasculight Laser Head Nd:YAG 1064nm Crystal
Vasculight Laser Nd:YAG 1064 Treatment Head 2002 Model A
|
|
|
Coherent Laserscope Green 40W Nd:Yag Laser KTP 532nm Raicol Hydrothermal Crystal
This is a standard 3x3x5mm KTP crystal for the Coherent/laserscope KTP-532 systems. These systems can run at about 40 watts of q-switched 532nm output. And since the beam focuses inside the crystal, it is a common part to fail without warning. Raicol is as good as it gets for hydrothermal grown crystals. If you are using these lasers for your light show display, you should get yourself a spare KTP so you can change it out yourself in a half hour or so. That way, a KTP going bad will not be a(literal) show stopper. See my other listing for the larger 4x4x7mm cesium doped version. I have lots of lasers and other unique stuff for sale this week
|
|
|
Continuum Surelite SLI-10 Pulsed Nd:YAG Laser 1064/532/355nm 10Hz Operational
Continuum pulsed doubled and tripled Nd:YAG laser system with SSP(Surelite Separation Package) Model Surelite SLI-10/ 1064nm. 532nm, and 355nm operation/ Manufactured Aug. 1996/ Rated 320 mJ/pulse@ 1064 nm(we measured almost 5 watts average power) at 10Hz rep rate with a 5-7 ns pulse width and 150 mJ/pulse@ 532 nm(not measured) at 10Hz rep rate with a 4-6 ns pulse width and 55mJ@ 355nm(not measured) at 10Hz with a 4-6 ns pulse width. Unit is being sold in as-is, where-is, tested operational, as described above condition with no returns/ Buyer is responsible for all shipping and insurance charges. Please feel free to contact us for video of laser in operation or with any further questions. Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options.
|
|
|
Coherent / Spectra: Small Nd: YAG Laser Optic Crystal Rod Mount Setup
Coherent/ Spectra: Small Nd: YAG Laser Optic Crystal Rod Mount Setup Small ND YAG Laser Crystal Rod Mount Setup Up for bids is a small ND YAG Laser optic Crystal Rod w/ Mount setup. I really don't know too much about this item. It is used and is being sold as is. I obtained all sorts of KTP crystals& YAG Rods& other Laser optic items from a local lab in my area that shut down. You are bidding on the exact item pictured on this page. Please inspect all the pictures and thanks for having a look. Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: This will be shipped by UPS ground as soon as payment is received. The buyer pays the actual Shipping Rate: UPS Ground/ Insured(USA ... moreonly) International bidders contact us for shipping rate International customers are responsible for any and all customs or duty fees charged upon receipt in your country. Those fees are not included in this sale. Shipped vis USPS) ALL INTERNATIONAL SALES ARE SOLD AS IS I have a huge assortment of Optical Parts& Equipment listed on Ebay and in My Ebay Store. Items have a 10-Day Warranty from the day you obtain them. If for some reason the item does not work properly or is different from the listing description- then we will accept a return on the item and provide a refund or exchange. Original shipping paid to obtain the item is non-refundable) However. If you buy an item by mistake or you buy a working item& you realize that you simply don't want or need it- there will be a 20% restocking fee. So please research the item you are buying and asks us questions. Payment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We accept Pay Pal Payments for varified shipping address. This is our preferred method of payment) For International sales- Bank Wire Transfer(add 25.00) Paypal- if pre approved) Recipient is respons
|
|
|
High Power Coherent VLOC Mirror Coated Nd:Yag Laser Rod 50J Peak Energy Output
This is a Nd:Yag laser rod with mirror coated ends. The rod is about 1/4 inch diameter and 4 inches long It was originally part of a machine that welded electrodes inside vacuum tubes. It can produce pulsed energy up to 50J with powers peaking into the multiple tens of kilowatts. The OC end has slight damage from improper cleaning. But it does not significantly affect the use of this rod for a hobby laser. Mirror coated laser rods are extremely rare and hard to find. The laser rod needs a strong flash lamp to drive it since the dopant level is quite high. I had good luck firing the rod with the flash lamp in my other listing plus 1250V 250uF with 75 turns of 10 gauge wire as the smoothing choke/trigger transformer. The output of this rod makes those SSY-1 lasers look like a bug zapper compared to an arc welder. Where the SSY1 will flash and ... moresmoke stuff, this one will actually light the smoke on fire and burn all the way through electrical tape in one shot without focusing. Please be careful with this laser part! Definitely not something you can find at Radio Shack! I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Coherent Nd:YAG Laser Beam Switch Part 80W of 1064nm 532nm
This is a rotary solenoid with a DBHR mirror for Nd:yag 1064/532nm. It was used to switching a beam through a THG crystal in a complex cavity laser system. It would be useful for a laser light show beam dumping optic or safety shutter as well. The mirror is 1x2cm square I have lots of lasers and other unique stuff for sale this week.
|
|
|
Thales Nd:Yag Pockels Cell Laser Interlock Unit ~ Model FE240 FE 240
Thales Laser Interlock FE240 Used Thales Laser Interlock unit is Model FE240 with connections for Pockels and Yag 1. 2, and 3. We have two available. On both the unit immediately powers up with the green light lit and the red interlock light also lit(we're guessing it's red because there's no laser connected, but this is just our guess) Good used cosmetic condition with some scratches and nicks to paint. Faint remnant of department number in marker on case or each unit. Dimensions: Case measures approximately 12" x 9-1/2" x 3-3/8" Weighs 7 lb. 2 oz. before packaging for shipment. Takes standard power cord(not included) Unit comes as shown. No accessories. Other parts, software or manuals. SHIPPING Shipping weight is 9 lbs. Ships via your choice of Parcel Select or P riority M ail with delivery confirmation and insurance ... morewithin the U.S. Our Sales Policies Money Back. Minus shipping, if not satisfied. International sales are"As-Is. If you have any questions, please email us before purchase. We package carefully and ship quickly. PayPal is the accepted payment method, expected within 3 days. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not alter customs forms to reflect a different purchase price. Terms and conditions of sale: All items are sold as is. With no warranty or guarantee implied or intended by the seller or the auctioneer, other than money back, if applicable. It is recommended the buyer make every effort to confirm item descriptions to their satisfaction before bidding on or purchasing any item. Seller is not responsible for how items are handled, used, or operated upon sale. Once the item is declared sold it becomes the responsibility of the buyer with all liabilities attached thereto. Froo www.froo.com | F
|
|
|
Photonics Industries DS20-527 12W Nd:YLF laser YAG DPSS green 532nm 527nm
Used. Tested working laser head only- no controller. 14-day right-of-return. More information below. Building on its successful innovations and patented and patents pending technologies. Its DS series diode pumped solid state lasers produce up to 20 watts at 532nm, 10 watts at 355nm and 5 watts at 266nm all in TEM 00 mode beam profile in a reliable. Versatile and compact package with excellent long term stability. Photonics Industries remains the only company who supplies complete product lines of high power harmonic diode pumped lasers including all Nd:YAG, Nd:YLF and Nd:YVO4. Each of these three lasers can be optimally used from low kHz/high pulse energy to very high repetition rate/low pulse energy. For example, in low kHz repetition rate applications such as OPO, laser pumping and high peak power nonlinear process, Nd:YLF produces up ... moreto 9mJ/pulse at 532nm, 5mJ@351nm and 2.5mJ@263nm at 1kHz repetition rate. The repetition rate can be adjusted from 0 to 15kHz which compares favorably to competing pulse pumped high repetition rate high power Nd:YAG lasers. For very high repetition rate applications such as stereolithography, wafer inspections, Nd:YVO4 laser produces up to 20 watts@532nm, 10 watts@355nm and 5 watts@266nm at 25kHz repetition rate. The repetition rate of Nd:YVO4 laser can be adjusted from 0 to 100kHz. For applications in the 10kHz range such as micro-via hole drilling and PCB cutting. Nd:YAG produces up to 15 watts@532nm, 10 watts@355nm and 5 watts@266nm at 10kHz repetition rate. DS10 Series The Model DS10 series are solid state. Diode pumped Q-switched Nd:YAG, Nd:YLF and Nd:YVO4 lasers. They are designed as complementary to the GS series high power lamp pumped and the DS20 high power diode pumped harmonic lasers. By integrating its patented and patents pending UV generation technologies and about seven years intracavity harmonic generations design experience, the DS series diode pumped laser produces nearly 100% second harmonic and the highest UV conversion efficiency among diode pumped
|
|
|
ND YAG LASER HOUSING Spectra Physics- Exciter- BL10-106Q-22 with 2x lens
Pulled from a working production line we have no way of testing this item but it was working prior to removal. You get exactly whats in the photos.
|
|
|
8mm x 193mm YAG Nd Rod from Lumonics Multiwave 500W Laser
Nice 8 mm x 193 mm YAG Nd Crystal Rod Removed several used RODs from working 500 Watt Lumonics Multiwave Laser heads Removed from a working 500 Watt LASER:
|
|
|
Lumenis High Power Laser Head Housing + 8mm Rod ND:YAG 1064 nm + Damaged Mirror
You are bidding on Used: Lumenis High Power Laser Head Housing + 8mm Rod ND:YAG 1064 nm + Damaged Mirror Lumenis IPL Medical treatment Laser head parts WATER COOLED Laser Rod: ND:YAG 1064 nm Diameter of Rod: 8mm Length of Rod: 110mm/ 4.330" ROD looks clear! Mirror is damaged! Base size: 127.8 mm(length of the metal cavity body) FOR SALE AS IS. Powered by SixBit's eCommerce Solution
|
|
|
Multiwave 500W YAG Nd Laser Flow tube
1) Laser Flow tube This flow tube mates with a 8mm x 193mm YAG Nd Laser rod Removed from working Lumonics Multiwave 500 Watt Laser Tube with normal fluorescent room light I think this is a higher priced DOPED tube? The flow tube glows with a UV light di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1498ade0b78-0x10c-
|
|
|
Laser Cavity: with ND: YAG CRYSTAL: Purple Crystal Rod (5X100mm)
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Laser Cavity: with ND: YAG CRYSTAL: Purple Crystal Rod(5X100mm) Laser Cavity: with ND: YAG CRYSTAL Coherent Litton Airtron: Laser ND: YAG Purple Crystal Rod(5X100mm) This is a VERY nice looking Laser Cavity Setup with ND: YAG Crystal Rod inside. This was being used in a Large Medical Laser. It is still in great shape. Thanks for having a look. PLEASE inspect all the pictures. Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: This will be shipped by UPS ground as soon as payment is received. The buyer pays the actual Shipping Rate: UPS Ground/ Insured(USA only) International bidders contact us for shipping rate ... moreInternational customers are responsible for any and all customs or duty fees charged upon receipt in your country. Those fees are not included in this sale. Shipped vis USPS) ALL INTERNATIONAL SALES ARE SOLD AS IS I have a huge assortment of Optical Parts& Equipment listed on Ebay and in My Ebay Store. Items have a 10-Day Warranty from the day you obtain them. If for some reason the item does not work properly or is different from the listing description- then we will accept a return on the item and provide a refund or exchange. Original shipping paid to obtain the item is non-refundable) However. If you buy an item by mistake or you buy a working item& you realize that you simply don't want or need it- there will be a 20% restocking fee. So please research the item you are buying and asks us questions. Payment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We accept Pay Pal Payments for varified shipping address. This is our preferred method of payment) For International sales- Bank Wire Transfer(add 25.00) Paypal- if pre approved) Recipient is responsible for all customs. Duties and taxes incurred and
|
|
|
MITUTOYO VMU,LENS & MICROMANIPULATOR, Nd:YAG LASER LINE VIDEO MICROSCOPE(60AT02)
MITUTOYO VMU.LENS& MICROMANIPULATOR, Nd:YAG LASER LINE VIDEO MICROSCOPE(60AT02) Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: NOTE: P lease Press the Photo Above for clear and wide Please Read Item/Unit Condition: 1) Used and in working condition.We pulled from Research Liquidation Instruments out date. Packaged List: 1) Mitotuyo VMU Nd: Yag Laser Line Video Microscope Head w/ Video Cable(SR:011136) 1X) 2) Mitutoyo M Plan Apo 10.0.28/ 000/0 F=200(X1) 3) CHUO SEIKI-13 Motorized Micromanipulator(3x) 4) Not included the Fiber optic source light on this Sell. You will receive the item exactly on pictured. Note: This unit/ item we remove from USHIO japan Yag laser Instrument ... morefrom Research Technology Laboratory 2) Very nice cosmetic condition.Wear of minor scratched from the previous usage and handling. look picture we attached 3) Item is sold"as is" At Least Stated 4) No Warranty 5) Tax's. Duties,Tariff at your Country are not added in sales price,Buyer's must be shoulder. Testing Done: None Calibration: None Accessories Included: None Note: Any number from 1A. 1AT, 2AT, Mean's item in Tray Location NOTE: EMS. UPS, Fedex, DHL Shipping Only for International Question. Please ask before end of Auction. Please see pictures and the item descriptions further down for more details. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures. Unless otherwise stated. If it is not pictured or not listed, it is likely not included. We are not experts and do not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions. Please ask before you make your purc
|
|
|
High Energy Coherent Passive Nd:Yag Laser Q-switch Brewster Window Optic Dye
This is a neat passive q-switch for a Nd:yag laser. It is unique in that it is used at Brewster's angle which allows the pulse to be polarized as well as q-switched. If you are doing extra cavity SHG for a holographic laser. You need this optic to get reliable pulse consistency. Rare item to be sure! I have lots of lasers and other unique stuff for sale this week.
|
|
|
Lumenis Nd Yag Laser with Passive Q-Switch
Nd Yag Laser Module with Passive Q-Switch This is a used module. The crystal size is 53.0mm x 3.0mm
|
|
 |