|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States This module combines the high efficiency XMLSEMI XL4015 DC-DC buck converter IC with a TI LM358 Op-Amp for stable current regulation. Current limiting ... morefunction requires at least 5.6V input. 10x Mini360 1.5A Buck.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States 2pcs 5A Buck w/ Constant Current. The module will cut out if it is unable to source enough input current. 10x Mini360 1.5A Buck. 5x 5V Fixed Output Buck. ... moreSimply remove the adhesive backing from the heatsink and place it on the board as shown in the product photo.
Buy It Now
Free Shipping Condition: New Location: United States [1 x 400W Boost Converter. Module properties: non-isolated step-up module (BOOST). Constant] range: 0.2-12A. Module size: 67mm X48mm X 28mm (LxWxH). Single ... moremodule: 60 g. driving high-power LED lights.
Buy It Now
Free Shipping Condition: New Location: China Output current: 0~15A. Input current: 0~15A. DC Boost Module 1. Active heat dissipation Continuous operation with input fan. Heat dissipation mode: active ... moreheat dissipation Continuous operation by connecting input fan.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States This module combines the high efficiency XMLSEMI XL4015 DC-DC buck converter IC with a TI LM358 Op-Amp for stable current regulation. Current limiting ... morefunction requires at least 5.6V input. 10x Mini360 1.5A Buck.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States This module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s and 18650s that don't have their own protection circuit. ... moreThe USB port is for charging only.
Buy It Now
$3.20 Shipping Condition: New Location: China [(Module properties: non-isolated step-up module (BOOST). Constant] range: 0.2-8A. Module size: Length 70mm width 36mm height 13mm. Single module: 50 ... moreg. the current will increase too quiet). Overcurrent protection: There.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States 1.0MHz Switching Frequency,
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The FP5139 module is small and easy to use. Input: 3-35V DC 9A, Output: 3.5-35V DC 6A, Max Power: 100W when input and output both exceed 20V, otherwise ... more65W. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States Module properties: non-isolated step-up module (BOOST). Quiescent current: 10mA (12V to 20V). Single module weight: 60g. Module size: 67mm X 48mm X 28mm ... more(LxWxH). It can input 12V and output can be adjusted from 12-50V.
Buy It Now
$3.00 Shipping Condition: New Location: China Output Current: rated current 2.5A/ 3A MAX ( Heat-sink Needed). Output short circuit protection: Yes, constant current (constant current setting values). ... moreTurn lamp current: constant current value (0.1), turn the lamp current constant current value Linkage.
Buy It Now
$5.45 Shipping Condition: New Location: Addison, United States Output current: adjustable maximum 5A. Note: If using this module for more than 3A, 35W - you need to use radiator to enhance heat dissipation! Load Regulation: ... more± 0.5%.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Output anti-reverse irrigation. - Output power: natural heat dissipation 35W, strengthen heat dissipation 50W. enhanced heat dissipation. - Soft start: ... moreyes (with high power and load module may fail when starting).
Buy It Now
Free Shipping Condition: New Location: United States Output backflow prevention: Yes. Output power:35W/ 80W. Conversion efficiency: 88% or so. Input anti-reverse connection: Yes. One-piece molding frosted ... morepanel, high-quality aluminum alloy knob cap, feel good.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States Output anti-reverse irrigation;. Output power Natural heat dissipation 35W, strengthen heat dissipation 50W. The module can be set to ON/OFF by default. ... moreIt also has anti-backflow protection at the output end, eliminating the need for an anti-backflow diode during charging.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States This module combines the high efficiency XMLSEMI XL4005 DC-DC buck converter IC with a TI LM358 Op-Amp for stable current regulation. 2pcs 5A Buck w/ ... moreConstant Current. Be careful with the USB port, not apply more than 5V to USB devices.
Buy It Now
$3.20 Shipping Condition: New Location: China Type: Non-isolated Buck Module (BUCK). Buck, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, etc. Type: Non-isolated step-down module (BUCK). Output current: ... moreRated 8A (The current size is related to the pressure difference and temperature. ).
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States [(Module properties: non-isolated step-up module (BOOST). Constant] range: 0.2-8A. Module size: Length 70mm width 36mm height 13mm. Single module: 50 ... moreg. the current will increase too quiet). Overcurrent protection: There.
Buy It Now
Condition: Used Location: Papillion, United States Here we have a General Signal 20kw Constant Current Regulator, surplused by an airport in good working order. It was kept inside a building, and so is ... morestill in great shape. LOCAL PICKUP: Local pickup is great!
Buy It Now
Free Shipping Condition: New Location: Exeter, United States 1 x 400W DC-DC Step-up Boost Converter Constant Current Power. There are 2 heat sinks that would ensure a better heat dissipation. Then adjust "CC-ADJ" ... moreclockwise to the current value you need. Because if the more energy is left in battery, the less charging current will be.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States 300KHz switching frequency. Synchronous rectification technology uses a dedicated power MOSFET with very low on-state resistance to replace the rectifier ... morediode and reduce the rectification loss. Synchronous rectification provides the most efficient power conversion available, up to 98%!
Buy It Now
$3.00 Shipping Condition: New Location: China Indicator: CC indicator is Red, charging indicator is Red, charging completed the indicator is Blue. Output short circuit protection: Yes, constant current. ... moreFull load temperature rise: 45 ℃. Output: OUT+ output is positive, OUT- output negative.
Buy It Now
$3.20 Shipping Condition: New Location: China Output Current: rated current 2.5A/ 3A MAX ( Heat-sink Needed). Output short circuit protection: Yes, constant current (constant current setting values). ... moreTurn lamp current: constant current value (0.1), turn the lamp current constant current value Linkage.
Buy It Now
Free Shipping Condition: New Location: Phoenix, United States Output Current 700mA. Driver Type Constant Current. Supports a load up to 26 watts. Power Factor N/A. Lead Length 12" input, 7" output. Output Class Class ... more2. Output Channels 1. Universal input range of 120-277VAC.
Buy It Now
Free Shipping Condition: New Location: Fort Collins, United States Operation above 2A continuous current may require heatsinking and/or forced air cooling of the XL4015 IC and the LM317 regulator on the back of the circuit ... moreboard. Adjust the right button so that the “OUT” LED is illuminated.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States Quantity 5Pcs. 🧩High power, high efficiency, 5A, low ripple. Output current Adjustable maximum 5A. The current limiting function requires at least 5.6V ... moreinput. Type Step down Converter Module. Load regulation + 0.5%.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States 2pcs 5A Buck w/ Constant Current. 10x Mini360 1.5A Buck. 5x 5V Fixed Output Buck. 60W Buck/Boost w/ Constant Current. 130W Synchronous Buck/Boost (98% ... moreEfficiency).
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The XLSEMI XL6009 boost regulator IC has an integrated MOSFET, over-temperature protection, and over-current protection.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 5, Input power: 1500W max. 4, Input current: 50A max. 11, The maximum input current should not exceed 50A and the power should not exceed 1500W. 17, output ... morewith load instructions: when input 12V (input current 50A, output 60V or less, output can carry about 550W load), when input 24V (input current 50A, output can carry about 1100W load), when input 36V (input current 41.6A, output can carry about 1360W load), when input 48V (input current 31A, output can carry a load of about 1360W).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Input power: 1500W max. The maximum input current should not exceed 50A and the power should not exceed 1500W. High reliability, stable work. Input MOS ... moretube anti-reverse connection, (input is not afraid to connect the board).
Buy It Now
$5.00 Shipping Condition: New Location: China Input Current: 0-15A. Output Current: 0-15A. Power Modules. Security & Protection. Computer & Office. Capacity Display Miniature Resolution: 0.001AH. ... moreFondant tool. Current Regulation/Display Resolution: 10A/0.01A.
Buy It Now
Free Shipping Condition: New Location: United States Product: 500W boost constant current module. Module properties: non-isolated step-up module (BOOST). Type: Non-isolated boost module (BOOST). (related ... moreto the input and output pressure difference, the greater the pressure difference, the smaller the output current, if the output current exceeds 5A, add a heat sink or fan for heat dissipation).
Buy It Now
Free Shipping Condition: New Location: Edmond, United States Output current: Max. 5A (adjustable). Therefore, the battery must be used at the beginning. Use as a high-power LED constant current driver module. Short ... morecircuit protection: Yes (limited current 8A).
Buy It Now
$5.35 Shipping Condition: New Location: Wood Dale, United States MT3608 Step Up Power Booster Modules and use ‘em whenever we can. lot of features. The MT3608 is a constant frequency, current mode step-up converter ... moreintended. Internal soft start results in small inrush current and extends battery life.
Buy It Now
$4.50 Shipping Condition: New Location: China [(Module properties: non-isolated step-up module (BOOST). Constant] range: 0.2-8A. Single module: 50 g. Module size: Length 70mm width 36mm height 13mm. ... moreSet the output current to a minimum. the current will increase too quiet).
Buy It Now
Free Shipping Condition: New Location: Whippany, United States 【High Switching Frequency】 The synchronous DC/DC boost converter high switching frequency is a high-performance 400KHz 4A, and a small-capacity filter ... morecapacitor can be used to achieve very good results.
Buy It Now
Free Shipping Condition: New Location: Scottsdale, United States Simple and efficient, practical. With high quality acrylic shell. Would make a great gift Idea! Has the case however, it needs to be assembled. Increase ... morethe output current when rotating clockwise.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States It is suitable for various applications that require constant output current, such as converting 24v to 12v or 5v. Plus, it uses high-frequency low-resistant ... moreelectrolytic capacitors for low ripple input and output.
Buy It Now
$5.00 Shipping Condition: New Location: China Model: D3806. C. 000, C0.00, C00.0 and C000. For example: C.123 said 0.123AH, C1.23 said 1.23AH, C12.3 said 12.3 AH, C123. said 123AH. P. 000, P0.00, ... moreP00.0, P000. : power value, unit W, the position of the decimal point as the power to change the position.
Buy It Now
$3.20 Shipping Condition: New Location: China The frequency of the PWM signal must be less than 2 KHz. When the LD06AJSA / B temperature junction reaches about 135 ° C, the internal temperature setting ... moreof the block reduces the current so that the temperature of the LED junction will not rise further.
Buy It Now
Free Shipping Condition: New Location: College Point, United States There are 2 heat sinks that would ensure a better heat dissipation. Type: Non-isolated boost module. 1 X Converter Boost Module. Then adjust "CC-ADJ" ... moreclockwise to the current value you need. Because if the more energy is left in battery, the less charging current will be.
Buy It Now
Free Shipping Condition: New Location: China 1 Pcs 300W 20A DC-DC Buck Converter Step-down Module. The buck module has 2 heat sinks for enhanced heat dissipation. Input and output use high frequency ... morelow resistance electrolytic capacitor for stable output.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States 🧰High power, high efficiency, 5A, low ripple. Output current Adjustable maximum 5A. The current limiting function requires at least 5.6V input. Type ... moreStep down Converter Module. Load regulation + 0.5%.
Buy It Now
$5.45 Shipping Condition: New Location: Addison, United States They are exceptionally easy to use and require only 2 resistors to set the output. This allows the LM138 to be used with heavy transient loads and speeds ... morestart-up under full-load conditions. Under sustained loading conditions, the current limit decreases to a safe value.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States 1.0MHz Switching Frequency,
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States Do not back feed power through the module. Input: 4.75-23V, Output:1.0-17V, 3A Peak / 1.8A Sustained. 5x 5V Fixed Output Buck. 5x 3.3V Fixed Output Buck. ... more2pcs 5A Buck w/ Constant Current. 340KHz switching frequency,
Buy It Now
$3.20 Shipping Condition: New Location: China The frequency of the PWM signal must be less than 2 KHz. The on-chip power transistor and current block sense significantly reduce the number of external ... morecomponents, which makes the LD06AJSA / B ideal for LED driver.
Buy It Now
$5.45 Shipping Condition: New Location: Addison, United States Manufacturer Part No: LM317LZ. Both input and output regulation is better than standard fixed regulators. Included on the chip are current limit, thermal ... moreoverload protection, and safe-area protection.
Buy It Now
Free Shipping Condition: New Location: Exeter, United States 1 x 400W DC-DC Step-up Boost Converter Constant Current Power. There are 2 heat sinks that would ensure a better heat dissipation. Then adjust "CC-ADJ" ... moreclockwise to the current value you need. Because if the more energy is left in battery, the less charging current will be.
Buy It Now
$2.99 Shipping Condition: New Location: Jamaica, United States Module properties: non isolated buck module (BUCK) synchronous rectification. 1PCS DC-DC 10A Step-down Constant pressure constant current module Solar ... morepower lithium battery LED driver module. Short circuit protection: there are (limiting current for the current constant current value).
Buy It Now
Free Shipping Condition: New Location: Whippany, United States 5PCS XL6009 Boost Converter Module. 【High Switching Frequency】 The synchronous DC/DC boost converter high switching frequency is a high-performance 400KHz ... more4A, and a small-capacity filter capacitor can be used to achieve very good results.
Buy It Now
$5.45 Shipping Condition: New Location: Addison, United States Output Current: 20A(max.)., 15A(suggested). Efficiency: 95%(24V to 12V, 20A). The buck module has 2 heat sink that could enhance heat dissipation. Input ... moreand output use high frequency low resistance electrolytic capacitor, low ripple, stable output.
Buy It Now
Free Shipping Condition: New Location: Edmond, United States There are 2 heat sinks that would ensure a better heat dissipation. Then adjust "CC-ADJ" clockwise to the current value you need. Because if the more ... moreenergy is left in battery, the less charging current will be.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States The current limiting function requires at least 5.6V input. Type Step down Converter Module. Product Type power converter. Output current Adjustable maximum ... more5A. Load regulation + 0.5%. Output power Max 75 W.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Module Properties: Non-isolated buck module (BUCK). Output anti-anti-irrigation protection: no, the output must be connected to the battery plus blocking ... morediode, otherwise it will burn the module! Turn lamp is the output current detection.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States 1 x 400W DC-DC Step-up Boost Converter. Type: Non-isolated boost module. Then adjust "CC-ADJ" clockwise to the current value you need. Because if the ... moremore energy is left in battery, the less charging current will be.
Buy It Now
$3.50 Shipping Condition: New Location: China Maximum power: 600W. Arduino Module. B-BULE blue light: no current in constant pressure. Output current: 20A (MAX) 25A overcurrent. Simple operation, ... moreuse it to be available to use;. Wiring: high power situation, thicker wiring as possible.
Buy It Now
Free Shipping Condition: New Location: United States Output current: 0~15A. Input current: 0~15A. DC Boost Module 1. Active heat dissipation Continuous operation with input fan. Heat dissipation mode: active ... moreheat dissipation Continuous operation by connecting input fan.
Buy It Now
Free Shipping Condition: New Location: United States Input + is the positive pole of the power input, and input - is the negative pole of the power input. 2: Input current: 100A (maximum). 3: Input power: ... more2000W (maximum). Input current: 100A (maximum).
|
|
|
|
Meanwell dimmable & constant current LED drivers for DIY lighting/dimmer circut
Selling my used MeanWell dimmable and constant current drivers with dimmer circut and power supply. I had it set up for various LED DIY kits which I no longer need. All in good working order. Check out my other auctions. I will also be selling my Heatsink and Several CREE-LEDs. Thanks for shopping. 1-Mean Well LPC-35-700 constant current driver. 2-Mean Well ELN-60-48P dimmable driver. 1- 10V dimmer circut with Pot and variable power supply. 1- 5V/10V FLY36-5-12 2amp Fan power supply.
|
|
|
Welder,Mig-Tig-Stick,300amp.Constant voltage and constant current
This is a like new. Used l-tech,Esab,and several other names depending on who sold it.Known to be one of the best welder companies. This is a 300amp mig,tig,stick constant voltage constant current welder.Tig torch and stick holder optional as originally sold.Includes an almost full roll of stainless steal 316-l wire.No gas cylinder. Must be picked up at Oklahoma City,OK. Must send payment within 5 days.
|
|
|
Applied Energy Solutions #A15237 "StableMate" Constant Current Forklift charger
Applied Energy Solutions#A15237"StableMate" Constant Current Forklift charger. Used. But works great. Sells through dealers only. Recently quoted@ $1.395.00 each. Specification page link: We'll combine shipping on multiple purchases. Please ask for a combined invoice after making your purchases. Before you pay. WILL SHIP BUT. Local pickup is OK, we are in the Garden Grove, CA area(between Long Beach and Disneyland)
|
|
|
Miller Dialarc HF Welder Constant Current AC/DC Welding Powersource
This is a Used. From a working environment, Miller Dialarc HF Welder Constant Current AC/DC Welding Powersource 50+ feet of power cord included Inspected and tested by a professional Guaranteed against DOA Owners Manual avaiable at Millers website subaddress: om/o315u_mil.pdf
|
|
|
Heath-Schlumberger Constant Current Digital Bench Power Supply - 10A / 7.5V
Model EIA-416 Constant Current/ Voltage Power Supply. The box is in fair cosmetic condition with faded spots on the paint. The plastic. Black colored negative lead hook up twist screw has fallen off and was lost some place. A 1/4-28" stainless steel nut was used in its place. Both the banana jack and wire lead hook up functions of the jack still work. Otherwise in good working condition.
|
|
|
Miller Syncrowave 350 Constant Current AC/DC Welder
MILLER SYNCROWAVE 350 CONSTANT CURRENT AC/ DC WELDER Serial No. KB123401 Stock No. 902976 Foot Pedal Control Tank and Regulator NOT INCLUDED Input Volts- 208/ 230/ 460 Single Phase Amps- 149/ 130/ 65 KW- 16.8 Single Phase 60 HZ Output Volts- 32 NEMA I- 34 NEMA II Amps- 300 NEMA I- 350 NEMA II Duty Cyl. 60% NEMA I- 40% NEMA II Max OVC- 80 NEMA I- II Weld Range Amps- 3- 385 NEMA I- II Normal 0 false false false EN-US JA X-NONE Terms& Conditions of Sale for Ebay Items: DELIVERY: BUYER IS RESPONSIBLE FOR SHIPPING. INVOICES: Your eBay invoice may say that shipping is"Free" This is partially correct because YOU are responsible for the shipment. eBay currently doesn't have a box to put in"Not Applicable" so entering"0" into Shipping triggers its system to mark it as"Free" this is beyond our control, ... morebut in no way changes our terms. FREIGHT: We will not crate for freight shipments. If Buyer insists on using a frieght or enclosed van company to pick up machinery, Vulkane Industrial Arts charges a fee to band machine to pallet, cover in cardboard and shrinkwrap(contact us as the fee differs depending on machine) In many cases it is required that a machine be laid down for frieght shipment, buyer expressly waives liability against Vulkane Industrial Arts if machine is damaged in the shipping preperation stage. All frieght quotes, trucking company communication and paper work are the responsibility of buyer. Vulkane Industrial Arts is not responsible for any damage due to weather, riggers, trucking, or any damage involved in transport, loading, unloading or situations beyond Vulkane Industrial Arts control. Contact us for any additional information or details. GENERAL TERMS: By Purchasing equipment from Vulkane Industrial Arts. The buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Any taxes shall be paid by the buyer. FE
|
|
|
MILLER 330ST AIRCRAFT CONSTANT CURRENT AC/DC ARC WELDING POWER SOURCE-PARTS ONLY
Item: MILLER 330ST AIRCRAFT CONSTANT CURRENT AC/DC ARC WELDING POWER SOURCE-PARTS ONLY Model# 330ST Serial# JK630531 Cosmetic Condition: HAS SIGNS OF WEAR- SCRATCHES& STICKER RESIDUE(SEE PICTURES) Includes: FOOT PEDAL& CABLES SHOWN IN PICTURES Does not come with: MANUALS OR ANY OTHER ACCESSORIES Special Notes: USED& UNTESTED. SOLD"AS IS" OR FOR"PARTS ONLY" 835lbs. 37"d x 37"h x 24"w, The item pictured is the item you are bidding on. 5-13) Shipping Fees: UNIT IS FOR PICK UP ONLY OR BUYERS WILL HAVE TO SCHEDULE AN LTL TRUCKING COMPANY* Input 200/230/460/60 Hz/1 phase 16 KW Constant Current AC/DC All Weld Power Source Output Nema Class 1 AC 32 Volts 300 Amps 60% Duty Cycle Max OCV 80 DC 32 Volts 300 Amp 60% Duty Cycle Max OCV 80 All buyers please be aware of eBay’s Purchasing Conditions prior to ... moreplacing any bid or purchasing an item through“Buy it Now” You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated. By making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted. You enter into a legally binding contract with the seller and are obligated to purchase the item. To see the entire eBay User Agreement Policy. Cut and paste this link into your browser: http:pages.ebay.com/help/policies/user-agreement.html Contact Us: Prior to placing a bid on an auction item or purchasing a“Buy it Now” item. Please feel free to contact us if you have any questions in regards to the item. Just click the“Ask a Question” link at the bottom of the item page. All eBay buyers are responsible for knowing whether or not the item you are bidding on/purchasing is compatible for your needs. We will answer all questions received within 24 hours of receiving them Monday-Friday. E-mails will not be responded to on Saturday or Sundays. If you
|
|
|
MILLER DIALARC 250 AC CONSTANT CURRENT ARC WELDING POWER SOURCE
Up for your consideration is a Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used Constant Current AC/DC Arc Welding Power Source. Specifications: See pics for details. Comes as shown in pictures. Good Working Condition: Some cosmetic wear scratches and dirt. I will work with buyer on freight shipping. As I am unable to package for freight. I am unable to weigh this item for freightquote. Will deliver within 150 miles of 38646 for a low delivery fee. Please see photos for more information. Please read all the information before bidding. I will combine shipping on multiple items. Please Read my Return/Refund Policy. Most of the items that are listed here are used. Vintage or VINTAGE and are" Sold As Is" Unless I specify otherwise. Thanks for looking and please! I accept Paypal and other payment ... morealternatives. I do ship internationally. Payments must be made within 3 days unless communications with me are made. Very important that communications are made at the end of the auction. If non-payment is filed with eBay. I won't accept a return. shana351 at hotmail dot com Insurance is HIGHLY recommended for fragile items. I ship WORLD WIDE. If you have any questions about customs. VAT, or shipping fees to your country, please check your country's web site or email me. The eBay item# is posted on your customs form and it is a violation of international law to forge customs documents. Your item(s) will ship within 3 to 5 business day after your payment is received. If unforeseen circumstances happen. I will let you know ASAP. I ship via USPS Priority and UPS Ground, USPS Parcel Post takes longer, but it is least expensive. I am not responsible for slow delivery time. I will combine shipping on multiple items. Pay regular shipping for the item with the highest shipping amount& then just add one half of the shipping cost for each additional item! Shipping to the West Coast is sometimes slighty higher than what is shown. Please ask questions before bidding. Shipping
|
|
|
Extech 382260 80W Switching Mode DC Power Supply Constant Voltage/Current PARTS
Search our eBay Store! Extech 382260 80W Switching Mode DC Power Supply Constant Voltage/Current PARTS SKU: JV-TER-B-EXT80W Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Extech 382260 3-in-1 Lightweight 80W Switching Mode DC Power Supply w/3 Selectable Ranges*FOR PARTS OR REPAIR* P/N: 382260 Input: 100-240V; 50/60HZ; 1.1A Output: 0-36V; 0.5A; 80W MAX Physical Condition: Good. Minor scuffs/scratches. Top cover is missing screws. Unit does not power on. Power cable is not included. Dimensions(L" x W" x H" 12 9/16 x 2 1/16 x 5 7/16. BEING SOLD AS-IS FOR PARTS ... moreOR REPAIR. Please visit the following link for product information(for informational purposes only) Manufacturer's Description(for informational purposes only) Features: Constant voltage or current• 3 selectable ranges: 0.10 to 16.40V/0.100 to 5.100A- 0.10 to 27.60V/0.100 to 3.100A- 0.10 to 36.80V/0.100 to 2.300A• 4-Digit LED displays• Front/Rear output terminals• Remote sensing for accurate applied voltage at load point• Compact slim tower housing is ideal for tight work bench• Lightweight for easy portability PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All pa
|
|
|
Miller Thunderbolt 225A Constant Current A/C Stick Welder with 31' Leads
For your consideration is a used Miller Thunderbolt constant-current A/C stick welder. It has 31-foot ground/electrode leads complete with ground clamp and electrode holder. It is a little rusty and the paint is faded. But it works great. The plastic handle on the top for adjusting the welding amperage is partially broken, but a pair of pliers works fine. Due to the weight of this item, I am only offering local pickup. I only accept PayPal. Please contact me with any questions, or to set up a viewing of the welder. Thank you for looking at my listing.
|
|
|
I.S.C.O.#493- ELECTROPHORESIS CONSTANT VOLTAGE/CURRENT POWER SUPPLY(ITEM # 2305)
I.S.C.O. MODEL# 493- ELECTROPHORESIS CONSTANT VOLTAGE/CONSTANT CURRENT POWER SUPPLY( ITEM# 2 305) GOOD COSMETIC CONDITION. POWERS ON THIS EQUIPMENT IS OBTAINED FROM A CLEAN WORKING ENVIRONMENT. WE HAVE NOT TESTED IT FURTHER YOU CAN SEE THE CONDITION FROM ACTUAL PHOTOGRAPHS. NO WARRANTIES. PLEASE CALL US FOR MORE DETAILS Normal 0 false false false EN-US X-NONE X-NONE TERMS AND CONDITIONS Terms and Conditions Payment To be made NO LATER than 7 days from close of auction to ensure inventory. PAYPAL There is a 07 business days hold for all checks. NO EXCEPTIONS. If payment not received within these terms. We reserve the right to sell and/or post the item again. Contact us if you need more time. For local pick up Cash Only. California residents to pay 8.75% sales tax. Shipping UPS Ground is normally used. For heavier/oversize packages and International ... moreshipping other freight carriers may be used. We do not ship to PO Box. APO or FPO. No exceptions. Please provide your complete street name, number and phone number. Shipping cost if given is only for USA(lower 48 States) Ask for a separate quote(city and zip code) for shipping to Puerto Rico. Alaska, and Hawaii and for International Shipping. Buyer is responsible for all duties. Taxes and related tariffs. All orders are shipped to your CONFIRMED PayPal address. Any other option or request is SUBJECT TO 10 WORKING DAY HOLD depending on your history and experience with PayPal. Pick up fee from our warehouse may be up to 50% of the flat rate to ship. Your own shipping arrangements are subject to handling fee. Item will be shipped once payment is received and cleared. Item will ship in the retail box unless specified. Tracking An email to your PayPal address is usually sent with each and every order. Some email filters or spam filters may block this email. Check your settings and spam folder. Your item will normally be shipped within 1– 2 business days after your payment is cleared. Feedback We will leave reciprocal and deserving feedback. Leaving positive feedback
|
|
|
Miller CP/CC-1500 Constant Potential/Constant Current DC Arc Welder/Source
Miller CP/CC-1500 Constant Potential/Constant Current DC Arc Welder/Source This welder/power source is used but in good condition. It should be in working order. It comes with a cart. So the welder is mobile. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 27" LENGTH: 52" HEIGHT: 67" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES ... moreAND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER
|
|
|
250 Amp LINCOLN Constant Current AC/DC Arc Welder
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2431-320(1) Used LINCOLN IdealArc250 Constant Current AC/DC Arc Welder; S/N C1961200403; Code# 9992C Specifications: Welding Circuit. Output.250 Amps AC/DC(max. Secondary Volts.30(min. Duty Cycle.30 V@ 30% OCV Rated Input.71 Volts Length of Leads.30' work) 58' electrode) Nema Class II(30) KVAR.6.0. Electrical Characteristics.208/230/460 VAC/ 1 Phase/ 60 Cycles Overall Dimensions.20' L-R x 24' F-B x 32' High Weight.325 lbs. est. Price.$1.450.F.O.B.Casa Grande, Arizona. For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebaymachine@petersonmachinery.com. 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85222 About Us: ... moreSince 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills both horizontal& vertical, chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical horizontal, wheel) ovens,
|
|
|
A99632 Optronic Laboratories 83DS Constant Current Source
A99632 Optronic Laboratories 83DS Constant Current Source(Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# A99632 This Optronic Laboratories 83DS Constant Current Source looks to be in good cosmetic condition with signs of wear and previous use. When plugged in I ccoud hear/ feel the fan working. However I really lack the knowledge and equipment to test properly so it is being sold as-is. Unpacked dims are 19*16*8. See pictures for more details. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $37.00(for DOMESTIC shipments only- 48 contiguous states excluding ... moreHawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 24.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate ap
|
|
|
Tested Working EC Constant Voltage/Current Power Supply,Electrophoresis,D2MM372
This listing is for an EC452 Power Supply. Well Tested. Works Great! Perfect for gel electrophoresis, Run two gels at once, Run at constant current or constant voltage, Hi and low settings for both voltage and current, 0-500 V, 1-500 mA, If not satisfied for ANY reason. Send back within 60 days for a refund. Please see our other listings, since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TRACER 2 CONSTANT CURRENT NERVE LOCATOR
TRACER NERVE LOCATOR COMES WITH ELECTRODE CABLE AND CARRYING CASE. NO FOOTPEDAL ENCLOSED"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. DISCLAIMER: Regardless of the origin of the equipment. Documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the ... moreequipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f2769a68a-0xf3-
|
|
|
Caswell Aluminum Anodizing 25 Amp Constant Current Rectifier Power Supply BONUS!
Bought the anodizing kit from Caswell. This was used only a few times then I was unable to keep anodizing. Great power supply and did an excellent job. Sells on caswell for $319.00BONUS! Will also include my immersion heater! Bought for $90.00 See photoCaswell 25 amp constant current rectifier for anodizing aluminum.Output Voltage: 1-15 VDC Adjustable or 12 VDC FixedOutput Current: 1-25ARipple And Noise: 5mV r.m.s.Line Regulation: 50mV(+/ 10% Variation)Load Regulation: 50mV(0-100% Load)Power Source: 120VAC/60Hz. 6.3 ampsMeter: Digital LED(+/1% +2counts)Dimensions: 8.6" x 4.3" x 7.6" All together you get two products that total over $400.00 for $250.00!Buyer pays shipping costs
|
|
|
Soneil 36 Volt 4.5A Constant Current Charger Model: 3610SRF
Up for sale is a soneil 36vdc constant current battery charger. This charger will fully charge a 36 volt 12ah battery pack in just over 2 1/2 hours and larger 20ah packs in less than 4 1/2 hours. Just plug it into 110/230vac line power attach the leads and switch the charger on. It features fan cooling and fused over current protection. Local pickup is fine. If you live in the Los Angeles area I'm happy to drive out within a 15 mile radius of downtown to meet you for fulfillment. Posted with
|
|
|
Lincoln Electric IdealArc 250 Constant Current Arc Welder 9992 208/230/460 Volt
CASH ONLY SALE! Pay on pickup Lincoln Electric IdealArc 250 Constant Current Arc AC/DC Welder 9992 208/230/460 Volt 53/48/24 Amp Used. Guaranteed to work or your money back. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f59a1818a-0xd6-
|
|
|
MSA 486306 AUTOMATIC CONSTANT CURRENT CHARGER 200MA
THIS IS A MSA 486306 200MA AUTOMATIC CONSTANT CURRENT CHARGER COMES AS SHOWN UNABLE TO FULLY TEST. Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item3. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f65661e9b-0xfd-
|
|
|
MSA 489129 AUTOMATIC CONSTANT CURRENT CHARGER 200/100MA
THIS IS A MSA 489129 200/100MA AUTOMATIC CONSTANT CURRENT CHARGER COMES AS SHOWN UNABLE TO FULLY TEST. Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item3.
|
|
|
AVTECH Electrosystems Ltd. Constant Current Generator Model AV-106A-B
PLEASE MAKE SURE YOU READ PAYMENT POLICY BELOW BEFORE BUYING ITEM Up for sale: Avtech Electrosystems constant current generator. Item is in good working condition. Comes only with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are taken from manufacturer and off the unit itself and may vary slightly due to upgrades, options, or revisions this unit may or may not have. Call us at 602-315-1898 for any ques tions: Specifications: Model# AV-106A-B-N-OPWRA S/N: 8777(MOD A) Electric: 50 AMP. 13V, 10 KHZ, Pulsed Input Power: 115-230V. 50/60 HZ Made in Canada Modified for Constant Voltage For the manufacturer’s PDF brochure and info. Please click on the following link: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MUST READ ... moreBEFORE BIDDING: Important shipping information& shipping quotes: We do not make money out of shipping. As a matter of fact. We prefer that buyers arrange their own shipping or provide us with their FedEx or UPS account if they believe they could save money by doing so. We all know that shipping is expensive and fees continue to increase due to higher fuel prices. Higher shipping cost negatively impacts our sales as it makes the overall transaction more expensive for buyers. This is especially true if we are shipping an item from Arizona to the east coast or overseas. Please do not rate us unfavorable when it comes to shipping. If you ever think the shipping cost is unreasonable. Arrange your own or consider not purchasing the item. We would rather not sell than receive poor feedback. Keep in mind that lead time is up to 5 business days for domestic shipping and up to 10 business days for international shipping. International Buyers: Please note that import duties. Taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs officials to determine what these additional
|
|
|
Oriel Model 68830 Constant Current Power Supply
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Oriel Model 68830 Constant Current Power Supply. Description Oriel Constant Current Power Supply in Good Condition! We were unable to test this unit other then to power it on. Powers on and responds. The power button lights up. It humms, and when the output pre-adjust button is pushed, the needle indicates the output. The output adjustments works as well. This unit was as federal government surplus. It appears to be in good condition other than some minor cosmetic issues. Could use a little clesaning up. This is Model 68830. Features: 110 V- 50/60 Hz- 8 Amps- Serial 705 Includes: Everything Pictured! Defects: None Detected other then a few scuffs- cosmetic only We sell an assortment of items that are both new and used. We do our best to describe the item accurately. But please ... moreuse the pictures as your final decision maker on whether you want the item or not. We are not experts in all areas. If you have questions, please contact us. Many of our used items come from estates. We do realize that with many antiques and vintage items. Condition is everything. However, we typically do not do too much cleaning of these items as we know that with certain items, if they are not cleaned properly, it diminishes the value. We leave the cleaning up to the new owner. Contact US: If you have questions about a particular item or want to talk about larger quantity buys. Please call(920) 246-4663 or e-mail patrick(at)packercitysales(dot)com. If you have any questions before or after winning the auction. Please do not hesitate to contact us. Our office hours are Monday to Friday 8am-6pm CST. We are off during the weekends and all major holidays. All emails and shipments will be processed within 2 business days. If you are not satisfied with the purchase. Remember to contact us before you leave a feedback. Leaving feedback means you have already graded this transaction. And it will not help to bring it closer to resolution. We like good feedback, so we work
|
|
|
Tyco 108959503 NP1500 Constant Current Front-End Power Supply Module 1200/1500W
Tyco 108959503 NP1500 Constant Current Front-End Power Supply Module 1200/1500W Tyco 108959503 NP1500 Constant Current Front-End Power Supply Module 1200/1500W The NP1500 front-end power supplies are specifically designed to operate as an integral part of a complete distributed power system. A full complement of alarm and shutdown features have been incorporated into the power supply to protect the system in the event of a fault condition. The flexible feature set makes this front-end power supply an excellent choice for applications requiring modular ac-to-dc bulk intermediate voltages. Such as distributed power. Features reflect an emphasis on worldwide acceptance of this power system. Features: Universal AC input 1500 Watt output from 200-240 Vac 1200 Watt output from nominal 100-120 Vac Rated for-5 to +55°C operation Voltage programming ... morerange– 52V default. Programmable from 48V to 56V Voltage margining with optional Network Protocol Card(NPC) from 42V to 58V Redundant parallel operation Temperature dependent variable-speed fan Hot insertion/removal(hot plug) Active load sharing Remote sense Remote On/Standby Over-temperature protection Optically isolated alarm signals with a common return Front panel LED indicators Specifications: Manufacturer: Tyco Electronics Part Number: 108959503 Series: 1:1F Input: 120V~12A. 50/60Hz Output: 48-56V. 1200W Input: 200-240V~8.5A(8.5A) 50/60Hz Output: 48-56V. 1500W Condition: Good cosmetic condition with some signs of previous use. Tested: Unit was removed from a working system Warranty: 14-Day Right-of-Return SKU: 391571 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3
|
|
|
MILLER SYNCROWAVE 250 CONSTANT CURRENT AC/DC ARC WELDER POWER SOURCE
MILLER SYNCROWAVE 250 CONSTANT CURRENT AC/DC ARC WELDER POWER SOURCE Click Images to Enlarge MILLER SYNCROWAVE 250 CONSTANT CURRENT AC/DC ARC WELDER POWER SOURCE OUTPUT VOLTAGE: 28/ 30. AMPS: 200/ 250. DUTY CYCLE: 60% 40% MAX OCV: 80/80. INPUT VOLTAGE: 200/ 230/ 460. AMPS: 110.4/ 96/ 48. PHASE: 1. 60 HZ. OVERALL MEASUREMENTS: 31" x 53" x 41" WEIGHT: 490 LBS LOADING FEE: $25 COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. ... moreIf you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Clevela
|
|
|
Vexta Stepper Driver Controller, UD2115A, 2 Phase, Constant Current, Used
Used UD2115A Vexta Stepper Driver Controller 2 Phase. Constant Current Specs: Guaranteed no DOA. Item shipped within 1 business day of cleared payment. Paypal. Skrill or pay on pickup. I also accept postal $ orders. Email before buying. International bidders are responsible for customs. Duty or VAT fees.
|
|
|
LINCOLN ELECTRIC AC 225 ARC WELDER CONSTANT CURRENT AC WELDER
THIS IS A LINCOLN ELECTRIC AC 225 ARC WELDER CONSTANT CURRENT AC WELDER A TERRIFIC FIND HERE IT IS A LINCOLN ELECTRIC AC 225 ARC WELDER CONSTANT CURRENT AC WELDER THIS IS A CONSTANT CURRENT AC WELDER* THIS HAS BEEN USED AND SHOWS OBVIOUS SIGNS OF USAGE SUCH AS SOME SURFACE SCRATCHES AND SOME DISCOLORATION AND A FEW DINGS HERE AND THERE BUT IT IS IN GREAT SHAPE OVERALL AND WORKS EXCELLENT GUARANTEED PERFECT FOR YOUR NEXT JOB DO NOT MISS OUT BE SURE TO CHECK OUT MY OTHER ITEMS I OFFER A WIDE VARIETY FOR EVERYONE! ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13fb89a04fd-0xfb-
|
|
|
Tyco Electronics Constant Current Front End Power Supply Rectifier 1200W NP1500
Tyco Electronics Constant Current Front End Power Supply Rectifier 1200W NP1500 Condition: Used Please Note the following: 1. Will provide 30 days DOA warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. S/H in continental USA. Expedited shipping can be arranged upon request. Other Notes of Interest Shipments: All items will ship within 1-2 busness days of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
|
|
MILLER SYNCROWAVE 180 SD CONSTANT CURRENT AC/DC SQUAREWAVE POWER SOURCE
aims MILLER SYNCROWAVE 180 SD CONSTANT CURRENT AC/DC SQUAREWAVE POWER SOURCE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. WI. This is a used Constant Current AC/DC Squarewave Power Source in GREAT condition. Model# Syncrowave 180 SD Serial# LC300704 Stock# 907054 Features: Squarewave Output- Squarewave output in an economical package. Squarewave AC output provides a more stable arc and helps to eliminate tungsten spitting. Single Vernier Range Control- Allows you finer TIG output adjustment with the remote foot or fingertip amperage control. Providing the crater fill capabilities required on aluminum and magnesium. Process Switch- Automatically sets machine for TIG or Stick. Eliminating guess work. Fixed Balance Control- ... moreProvides appropriate balance of cleaning action and penetration without additional adjustment. Preflow/Postflow- Built-in 0.35 seconds of preflow and 18 seconds of postflow. 3 position polarity switch-Provides a single AC range for aluminum and magnesium. DC electrode negative( for TIG, and DC electrode positive(+) for Stick. Thermal overload protection-Overtemp circuit senses when the machine is too hot. And automatically turns the output off, protecting the machine. Line voltage compensation-Keeps the output of the power source constant regardless of fluctuations in the utility power(+/ 10% for 230 volts. Applications: Metal Fabrication. Maintenance and Repair. Light Manufacturing. Aerospace. Tube and Pipe. Automotive Repair. Vocational. Training. Hobbiest. Specifications: Please refer to the photos for a list of specifications. Overall Dimensions: 16" x 20" x 30" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for mo
|
|
|
Miller Big 40 CC/CV Constant Current DC Welding Generator Welder Continental Eng
SKU: SDOT640170 A: 0015000000GcAPi O: 0065000000NLpTE PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Miller Big 40 CC/CV Welding Generator in Good condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Miller Model: Big 40 Hours: 2135 showing on meter Serial Number: Unknown Transport Weight: approx. 1.600 lbs. Transport Dimensions: L 65" x W 30" x ... moreH 62" Features: Quiet- only 65 db 5.500-watt peak AC power Automatic engine shutdown Specifications: 400 A at 36 V. 14.4 kW, 100% Duty Cycle 450 A at 38 V. 17.1 kW, 60% Duty Cycle For AC TIG: 375 A at 25 V. 9.4 kW, 40% Duty Cycle Output Power Range: DC Stick: 55- 500 A DC TIG: 15- 350 A AC TIG: 15- 375 A MIG/FCAW: 14- 40 V Generator Power: 5.500 Watts Peak- 4,000 Watts Continuous Deluxe Model: 15.000 Watts 3-phase 12,000 Watts 1-phase Continuous Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Condition: Unit in good overall condition Working at time of decommission Normal wear from previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and r
|
|
|
300 AMP MILLER SYNCROWAVE 300 CONSTANT CURRENT - AC/DC WELDING POWER SOURCE
300 AMP MILLER SYNCROWAVE 300 CONSTANT CURRENT AC/DC WELDING POWER SOURCE OUTPUT- 300 AMP. 32 VOLT, 60% DUTY CYCLE, 80 CV INPUT- 200/230/460 VOLTS. 110/96/48 AMP, 12.8 KW, 1 PH 60 CY DIMENSIONS- 27"LR) X 13"FB) X 33"H) HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Miller 330A/BP Constant Current AC/DC Power Source w/ Through TIG Torch Coolant
Liberty Machinery Company You are looking at: Used- Miller Model 330A/BP Constant Current AC/DC Arc Welding Power Source with Through TIG Torch Coolant* Serial No. JA33219 New- 1980 LMC#33333 SPECIFICATIONS: Amps 300 AC/ 300 DC Duty Cycle 60% AC/DC Volts 40 AC/ 30 DC Maximum OCV 80 AC/DC Electrics(Volts) 208/ 230/ 460 Amps 115/ 104/ 52 KW 21.8 KvA 23.8 Actual Dimensions 42"L X 42"W X 76"H Actual Weight 1000 Lbs. EQUIPPED WITH: TIG Welding Torch with Through Coolant Dyna-Flux Chiller Foot Petal Control for Amperage Start Adjustment Polarity Selector Amperage Adjustment High Frequency Adjustment Contact Control*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will ... moreemail additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may also check us out on our website at LibertyMachinery.com Also please check out our eBay store for other similar items. Click Pictures To Enlarge-
|
|
|
Miller The Legend AEAD-200LE Constant Current AC/DC Welder Power Gen Set
For your consideration. Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Miller The Legend AEAD-200LE Constant Current AC/DC Welder Power GEN Set S/N KA903166 Stock No. 9030 39-01-14 120/240 Volt 42/21 Amp 5.5 KW Max Cont. KW 5.0 PF 1.0 Max RMP 1860. 1 PH, 60 Hz w/ Onon Gas Engine Model P128G-I/10868C S/N J903735882 All items are for sale locally and are subject to prior sale. Units were acquired from a major plastics manufacture but have not been tested sold being sold as-is. Please check pictures closely as what you see it what you get. We are happy to strap to a pallet for LTL pick up at no additional charge. Please contact us with questions!
|
|
|
90-LB NICE CONSTANT CURRENT LAMP CONTROLLER 660
CONSTANT CURRENT LAMP CONTROLLER 660 YOU ARE BIDDING ON WHAT YOU SEE IN THE PICTURE. We accept PAYPAL only. WE SHIP AS IS. NO RETURNS. We ship US Postal Service anywhere in the United States for $155.00 flat shipping and handling fee. COMBINED SHIPPING: We can combine shipping on items purchased. With exceptions of some large items. E-mail to let me know you are ready for your combined shipping invoice. We must calculate the cost of shipping and handling based on the actual weight and size of the package. We can't add a set fee. International shipping on some items OK. All International buyers please contact me before bidding. International buyers assume full risk of delivery. And are responsible for all duties and customs. International shipping costs: Priority Mail flat rate envelope or small box up to 4 lbs- When combining orders for ... morean international shipment. We must determine the cost based on actual weight and size of package.
|
|
|
MIYACHI WELTOUCH CY-210BK CONSTANT CURRENT WELDING CONTROL CY210
BT# 13191 M10C2-100.1Y You are looking for: MIYACHI WELTOUCH CY-210BK CONSTANT CURRENT WELDING CONTROL CY210 USED ITEM. POWER ON! 10 DAYS WARRANTY! Manufactured by: MIYACHI. Additional info: CONSTANT WELDING CONTROLLER Model: CY-210BK Control Power: 120 VAC. +/ 20% 50/60 Hz. Current Range: 1 kA to 80 kA(Maximum: 5 kA to 80 kA) Primary and secondary constant current and power supply voltage compensated control can be selected. Clear display with LED. NOT Includes cable. Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
MPJA Variable Benchtop Power Supply 0-18V Constant Current / Constant Voltage
Unit looks nice and appear to be in good cosmetic condition. It powers up and seem to be functional. the voltage does indeed go from 0-18v. Sold as-is. Shipping will be based on your zip code or location. International buyers please be aware of custom fees. They are your responsibility.
|
|
|
1930's MOLONEY ELECTRIC, CONSTANT CURRENT STREET LIGHTING TRANSFORMERS BROCHURE
THIS IS A 1920's-1930's MOLONEY ELECTRIC COMPANY CONSTANT CURRENT STREET LIGHTING TRANSFORMERS. POLE, SUBWAY AND STATION TYPE 8 PAGE BROCHURE. IT IS IN VERY GOOD PLUS CONDITION. BUYER PAYS S.H. GROUP# SS1) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Glassman PS/KZ-PG-DRIVER Constant Voltage / Current High Voltage Power Supply
Glassman PS/KZ-PG-DRIVER Constant Voltage/ Current High Voltage Power Supply Glassman PS/KZ-PG-DRIVER Constant Voltage/ Current High Voltage Power Supply This Glassman PS/KZ-PG-DRIVER Constant Voltage/ Current High Voltage Power Supply powers up. No other testing performed, is in good physical condition and is being sold on an AS IS basis. Handling Charge: 19.95(included in shipping above) ESSSURPLUS is proud to have our 15.000+ repeat customer feedback for you to review. Thank you for looking. And Good Luck if you're bidding! Important: Auction winners have 7 days to complete the purchase of item(s) won. Feel free to contact our office for assistance in the completion of your transaction if you are having difficulty. The auction item will be relisted or sold after the 7 day window. Thank you for your assistance. Please Note: We DO NOT ... moreship outside of the United States. However, Non-US buyers may have or find a US shipping address. Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground I will ship to: United States[Weight] 50 lbs. Shipping and Handling: Electronic Surplus Services a pretty image. with Vendio Research. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
MILLER THUNDERBOLT 225v ARC WELDER CONSTANT CURRENT AC POWER SOURCE
MILLER THUNDERBOLT 225v ARC WELDER CONSTANT CURRENT AC POWER SOURCE* Click on Images for larger view* Here we have a Good. Working MILLER THUNDERBOLT 225v ARC WELDER CONSTANT CURRENT AC POWER SOURCE. Comes as pictured. No leads are included. Specifications- Primary- Volts- 230 Amps- 45.5 Amps Sec Shorted- 75 Kw- 7.2 Frequency- 60Hz Single Phase Secondary- Volts- 3- 25 Amps- 200-225 Duty Cycle- 20% Max OCV- 80 Temp Rise- 115 degrees Celsius Shipping Weight: 150 lbs Thanks The Right Stuff Online. Inc. WINNING BIDDERS WELCOME TO PICKUP. Click HERE for directions. We Ship Worldwide! Simply email us for a shipping quote* This item Must Ship Freight. IT CAN NOT SHIP UPS. We search through a broker(CaseStack) for the best rates and delivery time to get your purchase to your door. Unfortunately they do not allow for Dock or Terminal Pick up. Before ... morewe can get you a quote. We will need to know a few things. 1. The Ebay item number. 2. Your address with zip code and phone number. 3. If your Address is a Business or Residence. 4. If a Business. Do you have a loading dock or forklift. Simply email us the information and remember to include the eBay item number. Add Me to Your My eBay Favorite Sellers List You may call us at(619) 563-5655 or use the"Ask Seller a Question" link at the bottom of the page. For Payment questions. Call(619) 563-5655. Monday thru Friday 9:30am to 4:30pm PST) Get your questions in early. Thanks much and Good Luck! This auction carries a 14(fourteen) day inspection. Simply call or email for return refund"GUARANTEE" at full purchase price. Minus shipping cost. Products that have been subjected to misuse, abuse, alteration, neglect or unauthorized repair, additions, improvements, attachment shall be deemed to be a waiver of product warranty by buyer and shall render this warranty null and void. All items are used unless otherwise
|
|
|
Advanced Illumination CS400 Constant Current Source 100-240VAC w/Power Cord
Advanced Illumination CS400 Constant Current Source 100-240VAC w/Power Cord From our inventory. We are selling a Advanced Illumination CS400 Constant Current Source 100-240VAC w/Power Cord. Specifications: Model# Advanced Illumination CS400 Constant Current Source w/Power Cord More Information: Comes with Power Cable 2 Sources 100-240 VAC.7A MAX 50/60Hz ST28-4-A 3 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 3 lbs. To calculate ... moreshipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please a
|
|
|
AVTECH AV-108B PULSED CONSTANT CURRENT SOURCE
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. AVTECH AV-108B PULSED CONSTANT CURRENT SOURCE This auction is for one Avtech AV-108B-2-OPWRB-PG-P. ... moreThe AV-108 series of pulsed constant current generators are designed for driving laser diodes and other low impedance loads with constant current pulses. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an addi
|
|
|
Grass SIU5 Stimulus Isolation Unit (2) & CCU1C Constant Current Unit (1)
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BRENT- 1-866-MHZ-ELEC- Grass Technologies SIU5 Stimulus Isolation Unit(2) CCU1C Constant Current Unit(1) comes with what you see in the pictures. If you don't see it. You probably won’t get it. Specifications are from manufacturer and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. eBay’s description of“USED ... moreor FOR PARTS OR NOT WORKING” and our description of“USED or FOR PARTS OR NOT WORKING” is different, therefore because eBay requires the filling in of this field, we state as“USED or FOR PARTS OR NOT WORKING” PLEASE READ OUR“CONDITION” for our description of“USED or FOR PARTS OR NOT WORKING” Model Number: SIU5D(Quantity 2) CCU1C(Quantity 1) Serial Number: SIU5D- 99G0011G& 99H0089G/ CCU1C- 99G0209G Condition: Used. Removed from service SIU5D General Description: For Student and Limited Research Applications Designed to be used between a Grass Stimulator and the stimulating electrodes to minimize artifact and provide greater safety for stimulation. The SIU5 contains a radio frequency(RF) oscillator which is modulated by the Stimulator output SIU5 Specifications: Method of Isolation: 2 MHz RF Transformer Intended Use: Research; Constant Voltage Procedures. DC Capabilities Constant Voltage Ranges: 0.015 to 150 volts in 3 decade ranges Isolation Characteristics: Balanced 25 pF. Each terminal 10^7 ohms to GND Common Mode Voltage: Including RF is reduced ~10 to 40 times Output Waveform: Square waves of Grass Stimulators are reproduced with negligible ef
|
|
|
Fluke 3330B Programmable constant current constant voltage DC Calibrator
Fluke 3330B Programmable constant current constant voltage DC Calibrator Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Thank you for visiting mister-surplus. We sell both new and used items. Most are surplus items previously used by private companies. Government institutions and agencies. Customer satisfaction is our#1 priority. Up for sell is Fluke 3330B Programmable constant current constant voltage Calibrator that's been tested to power up only. I pressed few buttons and system responded. Few lights are on and I'm not sure if this unit works with no problem or if needs repair. No further testing is done. Overall. Good physical condition. Calibration might needed. Being sold AS IS Comes exactly as pictured. We do our best to describe all items to the best of our ability. Please do not assume that accessories ... moreor the condition is other than described in the description. Any questions please feel free to ask. Please see photos and Policy for more details. Please see other items for other great deals. LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! Our business located at 827 N Rengstorff Ave. Mountain View, CA 94043 24 hours notice is required prior to pick up. Payment: Paypal* Visa. MasterCard, American Express, Discover* Santa Clara County sales tax will be applied if you are a California resident. Terms: All shipping costs are non-refundable for any circumstances. Buyer pays all freight costs for returning the product(s) All returned items must be the same condition as shipped in order to receive a refunds. 20% restocking fee applies to all returns. Returns(RMA) If you have an issue with your item once it is received. Please email through eBay and we will try our best to help resolve the problem. If your item is in need of a replacement. Repair, refund or exchange, please email through eBay for instructions. Contact: Please ask your questions through eBay messaging system. Business Hour: Monday- Friday 10:00am- 5:00pm PST# EE3 Payment Terms Payments must be received w
|
|
|
Fluke 3330B Programmable DC Constant Voltage / Current Calibrator TESTED
This Sale is for a Fluke 3330B Programmable DC Constant Voltage/ Current Calibrator. TESTED by our Lab Technician and works well! The Fluke 3330B combines high DC accuracy with the programmability required for automated calibration systems. May be programmed for analog DC outputs within ±0.003% of command from 0 to ±1111 VDC. Provides output currents from 0 to 111.11110 mA and output voltages from 0 to 1111.1110 VDC. Output current selection is provided in three ranges and is accurate to within ±0.006% of the selected range. Output voltage is available in three ranges with an accuracy of ±0.003% or ±3 mV(1000 V range) Also features overcurrent and overvoltage protection. SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" This item is NOT FOR EXPORT. ... moreU.S. SALES ONLY. Diversion is subject to civil and criminal Penalties. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters wil
|
|
|
Constant current regulator, Crouse-Hinds CHIII control system 75KW single phase
Adb-Alnaco Constant current regulator single phase input 220v output 120v Posted with
|
|
|
Lincoln Electric AC-225 AC Stick Arc Welder AC225 Constant Current 1-Ph
Questions? Call us: 1-877-328-9236. Lincoln Electric AC-225 AC Stick Arc Welder AC225 Constant Current 1-Ph. Manufacturer: Lincoln Electric Model: AC-225 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Lincoln Electric Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not tested since we do not have the proper resources. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Lincoln Electric AC-225 Arc Welder, Specifications: Manufacturer: Lincoln Electric, Model: AC-225, Code: 9422-405, NEMA Class III(20) Constant Current AC Welder, Input: Single Phase, 60 Hz, 230 V, 50 Amps, Output: 225 Amps Max. 25 Arc Volts, 79 Volts Max. OCV@ Rated Input, Duty Cycle 20% SKU: N29L005 For questions regarding ... morethis item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through u
|
|
|
HARRISON LABS CONSTANT CURRENT/ CONSTANT VOLTAGE MODEL # 865B POWER SUPPLY
HARRISON LABS CONSTANT CURRENT/ CONSTANT VOLTAGE MODEL# 865B POWER SUPPLY Description: Thank you for your interest! We are auctioning off this HARRISON LABS CONSTANT CURRENT/ CONSTANT VOLTAGE MODEL# 865B POWER SUPPLY Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN! Cosmetic wear and worn. Powers up. Due to the nature of vintage equipment. Sold as is for parts or repair! USA CUSTOMERS- NO MEANS TO TEST. Sold as is for parts or repair! INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. SOLD AS IS WITH NO GUARANTEES. 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing ... morewhat we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WELCOMED-PLEASE CONTACT US FOR ACCURATE SHIPPING CHARGES. Payment: Gladly accept most forms of payment including paypal. Click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
GUILDLINE MODEL 9770B: Constant Current Source - Operating Instructions w/schems
GUILDLINE MODEL 9770B: Constant Current Source- Operating Instructions w/schematics Manuals in good used condition. 14 day right of return. General description: GUILDLINE Model 9770B: Constant Current Source- Operating Instructions w/schematics We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ... moreship via Fed Ex or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: Powered by{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-14056b5aa8c-0xf6
|
|
|
Standard Power 1183-129 Constant Current Power Supply 30V Max , 0.1-4 Amps
Input Volts 115/230, Input Frequency 47-440 Hz, CC Amp Output 0.1-4.0, Max Output Voltage 30V, Here is what appears to be a constant current power supply. This has current adjust terminals. It can output 0.1-4 amps at up to 30 volts. This was pulled from a working ion implanter and is guaranteed in excellent working and cosmetic condition. Location; C 1206 13-7ListN. Shipping Costs We do not look to make money on shipping charges. We only try to cover actual postage and shipping costs. If you feel a shipping quote is too high. Please contact us as we may very well be able to do better. The Ebay calculator is simply one estimate and can be off at times. Turnaround Time About 95% of our orders ship within one business day and if you let us know that there is rush. We can almost always ship the same day. Freight items usually have a 2 day turn ... morearound time. Next Day Shipping We can offer next day shipping on just about all our products even if its not shown as an option on the shipping calculator. Please contact us for next day shipping options. We usually can get products out the same day even if paid for as late as 5:00 PM MST. Will You Reduce an Items Value on the Commerical Invoice to Reduce Customs Fees No. Unfortunately, we cannot reduce an items value on an invoice or shipping document. We understand paying customs fees is no fun(we have to pay them often as well) but lying about customs fees is against federal law and Ebay policy and the fines are severe. Can You Ship on My Account/Local Pickup Yes. We can ship on a customer's UPS and FedEx account. Local pickups are also accepted weekdays from 10-5 PM and by appointment. Packaging We take packaging very seriously and use only the best void fill and cushioning products. We have a foam in place system. Full crating department, and hundreds of in stock box sizes. We feel the added cost of the best shipping materials is worth it to make sure your products arrive safe. Freight/Items near/over 150 lbs/ Very Large Items Many of our products are too large to shi
|
|
|
BEHLMAN INVAR QS40 CONSTANT VOLTAGE / CURRENT DC POWER SUPPLY MAX OUTPUT 40V DC
THE eBay SHIPPING CALCULATOR IS NOT CORRECT Before you bid We suggest you contact us for more accurate shipping costs. We will need your City. State, Country, Zip/Postal Code. OR you can call us at 905-853-0078/ Toll Free 1-866-376-0078 For additional Fees& Auction Details. Scroll below the photos. Hours of Operation: Monday to Friday 9:00AM to 5:30PM EST. Note: Shipping from Canada is higher than from within the Continental U.S.A. Shipping Overseas can be Expensive- We recommend you ask for a quote before bidding. CONSTANT VOLTAGE/ CURRENT DC POWER SUPPLY MAX OUTPUT 40V POWERS UP AND RESPONDS TO CHANGES IN VOLTAGE SETTINGS. NO FURTHER TESTING DONE Approximate equipment weight and dimensions: 1 9"W x 5"H x 6"D. 12 lbs CONDITION: This item has been partially tested. And is being sold As-Is, Final Sale. See above for any ... moreadditional notes. IMPORTANT SHIPPING NOTE: Before You Bid We suggest you contact us for more accurate Shipping Costs. The eBay ca lc ulator is NOT correct. Call us at 905-853-0078/ 1-866-376-0078. Or send us an Email. We'll have an answer for you. Usually within 1 business day. Scroll below the photos for additional Fees and Auction Details. Please Note: Shipping from Canada is higher than from within the Continental U.S.A. Shipping Overseas can be Expensive- We recommend you ask for a quote before bidding. Payment Methods: Have Questions? Call us Monday-Friday Tel: 905-853-0078 or Toll Free: 866-376-0078 9:00am to 5:30pm Eastern Time. Pick-ups are welcome: Just give us a call to make arrangements. Taxes and handling/packing fees are still applicable. ITEM STATUS: We Guaranty Item Condition As Stated Under" CONDITION" Above. ALL SALES ARE FINAL. Unless otherwise noted. The items you are purchasing in this auction are sold" AS-IS. WHERE-IS" With all faults and may be Used. Damaged, or may have Missing Parts and/or Accessories. Seller expressly disclaims any Warranty of Merchantability. Fitness for a particular purpose or non-infringement. WYSIWYG What you&q
|
|
|
Biomagentic Technologies Inc CCS Constant Current Supply 9020-001 Powers On
Biomagentic Technologies Inc. CCS Constant Current Supply 9020-001 Powers On This is a great price for this unit and will not last long. Subject to prior sale! Photos show everything that is included. For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! 8666 3MZ-RR78C
|
|
|
Constant Voltage/Current Power Supply, 20kV, Glassman PS/WG-20P-15-M3
Normal 0 false false false EN-US X-NONE X-NONE Glassman PS/WG-20P-15-M3 Constant Voltage/Current Power Supply Input: 115VRMS. 50-60Hz Output: +20KV/15.0MA This unit has been tested and is working properly. There is a crack in the meter cover. As shown in photo. Normal 0 false false false EN-US X-NONE X-NONE Inventory SKU# 40516 A handling charge has been added for this item. Based on 28 years of experience shipping fragile scientific equipment. We feel special care is necessary for the shipment of your purchase. Please feel free to contact us at 781-871-8868 if you have any questions To our international customers: We only take Paypal if you are verified. If not you must send a wire transfer and there is an additional $35 usd fee. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the ... morebuyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. PLEASE NOTE We are selling this item as pictured. Any parts or accessories not displayed in the photo are not included in this sale. Please review both the picture and description. Feel free to ask questions and request additional information prior to purchase. All sales are final. Thank you for visiting our BMI Surplus. Inc. Store
|
|
|
2005 MILLER MARK VIII-2 8 BANK MULTIPLE OPERATOR CONSTANT CURRENT DC ARC WELDER
2005 MILLER MARK VIII-2 8 BANK MULTIPLE OPERATOR CONSTANT CURRENT DC ARC WELDER STOCK# 901348 SERIAL# LE487249 THIS IS A 8 BANK CONSTANT CURRENT DC ARC WELDING SOURCE. UNIT COMES AS PICTURED! THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION.IT WILL COME FLATBED OR LTL WHICHEVER MAKES MORE SENSE. WE GET GREAT RATES.EMAIL ME FOR A QUOTE! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. ... moreIf the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladly accept PAYPAL or email me about p
|
|
|
BARRETT ELECTRONICS CONSTANT CURRENT AUDIO AMP CIRCUIT BOARD CARD 80-3875-R7
BARRETT ELECTRONICS AUDIO AMP. GUIDE LINE RIVER) BOARD IN GOOD USED CONDITION. THIS USED BOARD WAS IN MR. BARRETT'S PERSONAL LAB STOCK. I HAVE NO WAY TO TEST THIS BOARD SO IT IS BEING SOLD( AS-IS) SHIPPING TO USA ONLY. SHIPPING TO OTHER THAN USA WILL COST MORE. CONTACT US FOR MORE INFORMATION AND COSTS. NOTE: PAYMENT MUST BE RECEIVED WITHIN 5 DAYS AFTER THE END OF THIS AUCTION. IF PAYMENT IS NOT RECEIVED THE ORDER WILL BE CANCELED AND THE ITEM WILL BE RE LISTED. FEEDBACK IS AN IMPORTANT PART OF BUYING AND SELLING ON EBAY. WE ARE MORE THAN HAPPY TO LEAVE A FEEDBACK ONCE U HAVE LEFT US FEEDBACK, THANKS! 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-140ed26829d-0xf3-
|
|
|
LAKE SHORE CRYOTRONICS CCS-EXB S-9 CONSTANT CURRENT POWER SUPPLY Used
Click on pictures to enlarge LOCAL PICK UP IS AVAILABLE AT NO COST Item Details: MAKE: LAKE SHORE CRYOTRONICS MODEL: CCS-EXB S-9/ CONSTANT CURRENT POWER SUPPLY CONDITION: USED/ WORKING Comes as pictured Warranty:Guaranteed against DOA Lister 45805 6/16/2013 Payment Details: We accept payment through Paypal. PayPal provides fast and secure transactions. We ship to confirmed PayPal address. No Checks or escrow. Canadian buyers are responsible for all custom- brokerage- GST and PST charges Shipping Information: We usually ship within 1-2 days after payment has been received. We allow FREE local pickup please call at 303-521-3869 to arrange pickup. Our address for pickup is SUM Computers Inc. 4945 Monaco St Commerce City CO 80022 Warranty Information: All items come with non DOA(Dead on Arrival) warranty unless stated otherwise. If the item arrives ... moredamaged please let us know and we will file a claim with the shipping company. Sorry we do not offer any warranties on the batteries software and operating system issues. Feedback and Contact Information: Our system is automated and will leave positive feedback upon receiving positive feedback. Please contact us if there are any issues with the item. Please give us an opportunity to resolve the issue before leaving any bad feedback. We try our best to explain the item with utmost accuracy but sometimes there are human errors. Please do not hesitate to email us with any questions or concerns. Why Buy from US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Tyco 1200W Constant Current Front End Power Supply 100-620-019 **Lot of 2**
Tyco 1200W Constant Current Front End Power Supply 100-620-019* Lot of 2* You are bidding on a lot of 2 Tyco 1200W Constant Current Front End Power Supplies. These power supplies are in good condition and are guaranteed to function properly. Please bid with confidence. 100% Satisfaction Guaranteed! Winning Bidder is to pay the Bid amount plus $19.99 for packing and shipping for the lower 48 States. International packages will be handled by the eBay Global Shipping Program. All buyers located in Georgia will pay 7.0% sales tax. Buyer can Pay with: Paypal. I cannot ship to a P.O. Box. Thanks. F2) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Endevco Model 2771AM3 IN-LINE CHARGE CONVERTOR FOR CONSTANT CURRENT source 2222C
Auction Wizard 2000 Listing Template- AW2KLOT#14309 Endevco Model 2771AM3 IN-LINE CHARGE CONVERTOR FOR CONSTANT CURRENT source 2222C We gladly ship to most countries! Email us for a Quote Endevco Model 2771AM3 IN-LINE CHARGE CONVERTOR FOR USE WITH CONSTANT CURRENT SOURCE for use with Endevco Models 2220c. 2961, 2950 etc model 2771am3 in-line charge convertor for use with constant current source model 2950 triaxial mounting block DESCRIPTION The ENDEVCOModel 2771AM3 Remote Charge Convertor(RCC) is a low noise. Two-wire, Remote Charge Convertor ENDEVCO Model 2771AM3 MODEL 2771AM3 Allows High Impedance, Mode Piezoelectric Accelerometer ENDEVCO Remote Charge Convertor MODEL 2771AM3, charge input, such as a signal from a high temperature piezoelectric accelerometer, into a low impedance voltage proportional to the transducer's charge. This ... moreRCC is powered by the constant current source. The Model 2771AM3 is rugged and lightweight. It has outstanding signal-to-noise ratio and. Capacitance) of 5000 pF. Don't forget to place your bid. By bidding on this auction you agree to the following terms: Shipping Terms: Buyer pays all shipping costs. Let us know if there is an issue with the shipping costs. As they are automatically calculated by ebay. Shipments made to California must include 8.75% sales tax unless we are provided with a valid resale certificate. We reserve the right to ship with Fedex ground. USPS and any other carrier in the best interests of the buyer and seller. The Parcel post option shown is only available to alaska. Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required. Payment Terms: Payment is to be made by PayPal Please contact us if you have any questions about ebay's recent payment policy change. Payment is to be received within ten days of close of auction. Should payment not be received within ten days the item will be re-listed and high bidder will forf
|
|
|
Miller Roughneck 2E Constant Current AC Arc Welding Generator - Parts/Repair
SKU: 640460 A: 0015000000nQrj6 O: 0065000000O0qAQ PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Miller Roughneck 2E Constant AC Arc Welding Generator in parts/repair condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Miller Model: Roughneck 2E Serial Number: KA747285 Transport Weight: approx. 420 lbs. Transport Dimensions: L 44" x W 42" x H 33" ... moreFeatures/ Specifications: Rated Output: 200 Amperes Welding Current Range AC: Minimum: 70 Amps Maximum: 140 Amps Open-Circuit Voltage: 80 Current Adjustment: Fine adjustment with each range Power: 3.5 KVA. 15.2 A, 230 volts Ac, 60 Hz Resources: For more information on this unit including full specifications, view the manufacturer’s brochure(pdf) Condition: When bidding. Please consider this item to be for parts or repair only Engine turns over but will not start Normal wear from previous use in working industrial environment See photos for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machi
|
|
|
GRASS CONSTANT CURRENT UNIT CCU1
Very clean Grass Instruments constant current unit. Pulled from a working lab.sold as is. The above used Lab equipment includes only what is pictured and has been described honestly. Please review all photos before you purchase this product or contact me with any questions you may have.
|
|
|
Advanced Illumination CS410 Constant Current Source Controller
Questions? Call us: 1-877-328-9236. Advanced Illumination CS410 Constant Current Source Controller. Manufacturer: Advanced Illumination Model: CS410 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Advanced Illumination Condition: Used. Comes in non-original packaging. Notes: This item has not been tested. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Advanced Illumination CS410 Constant Current Source Controller, Specifications: Manufacturer: Advanced Illumination, Model: CS410, Dual Output, Output Type: RS-232, SKU: M46M022 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ... moreISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to be as described. The buyer must notify us within 14 days of rece
|
|
|
E.C. CORPORATION EC 452 CONSTANT VOLTAGE/CURRENT ,POWER SUPPLY( ITEM # 2009/15)
E.C. CORPORATION- EC 452 CONSTANT VOLTAGE. CONSTANT CURRENT POWER SUPPLY( ITEM# 20 09/15) GOOD COSMETIC CONDITION. POWERS ON THIS EQUIPMENT IS OBTAINED FROM A CLEAN WORKING ENVIRONMENT. WE HAVE NOT TESTED IT FURTHER YOU CAN SEE THE CONDITION FROM ACTUAL PHOTOGRAPHS. 14 DAYS NON DOA WARR PLEASE CALL US FOR MORE DETAILS TERMS AND CONDITIONS Terms and Conditions Payment To be made NO LATER than 7 days from close of auction to ensure inventory. PAYPAL There is a 07 business days hold for all checks. NO EXCEPTIONS. If payment not received within these terms. We reserve the right to sell and/or post the item again. Contact us if you need more time. For local pick up Cash Only. California residents to pay 8.75% sales tax. Shipping UPS Ground is normally used. For heavier/oversize packages and International shipping other freight carriers may be ... moreused. We do not ship to PO Box. APO or FPO. No exceptions. Please provide your complete street name, number and phone number. Shipping cost if given is only for USA(lower 48 States) Ask for a separate quote(city and zip code) for shipping to Puerto Rico. Alaska, and Hawaii and for International Shipping. Buyer is responsible for all duties. Taxes and related tariffs. All orders are shipped to your CONFIRMED PayPal address. Any other option or request is SUBJECT TO 10 WORKING DAY HOLD depending on your history and experience with PayPal. Pick up fee from our warehouse may be up to 50% of the flat rate to ship. Your own shipping arrangements are subject to handling fee. Item will be shipped once payment is received and cleared. Item will ship in the retail box unless specified. Tracking An email to your PayPal address is usually sent with each and every order. Some email filters or spam filters may block this email. Check your settings and spam folder. Your item will normally be shipped within 1– 2 business days after your payment is cleared. Feedback We will leave reciprocal and deserving feedback. Leaving positive feedback validates the stated warranty. We report spoofs,
|
|
|
NICE Yokogawa BT200 Brain Terminal, communication, I/O values, constant-current
You are bidding on a Nice Yokogawa Model BT200 Brain Terminal With(2) Data Cables and case. The BT200 BRAIN Terminal is used to set. Change, display and print out parameters such as tag numbers, output mode, and range for equipment that use BRAIN communications. This handheld terminal also monitors I/O values and self-check results, sets constant-current output, and allows zero adjustments. To perform these functions, it must be connected to the equipment’s 4 to 20mA DC signal transmission lines or to a dedicated connector on the ESC(Signal Conditioner Communication Card) when the system is started up or maintained. http:www.yokogawa.com/fld/AUX/fld-bt200-01en.htm. I will ship international if product is approved by your Countries regulations. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or ... morenon-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
Grass Constant Current Unit Model CCU1A Electrode Reverser CCU1-A Used Condition
Grass Constant Current Unit Model CCU1A Electrode Reverser CCU1-A Used Condition Description: PLEASE READ BEFORE PURCHASING ASK ALL QUESTIONS THROUGH EBAY MESSAGES BEFORE PURCHASING TO AVOID ANY CONFUSION. EXACTLY what is pictured is included. If it is not pictured. Assume it is not included. IF YOU RECEIVE YOUR ITEM AND IT IS NOT TO YOUR 100 PERCENT SATISFACTION. CONTACT US BEFORE LEAVING FEEDBACK! We strive to make sure every transaction a positive one! For Freight Shipping: In order to set up the freight shipment as quickly as possible please provide me with a business name. Address, phone number and whether you have access to a loading dock or forklift to remove the skid from the delivery truck OR if you will need the assistance of a lift gate truck to lower the item to the ground which is an additional charge. If you by chance need the ... moreitem shipped to a residence, it will be much more expensive. Thank you. CONDITION OF ITEM IN THIS LISTING IS:2 The item condition numbers and their definitions are below: 1. NEW 2. I guarantee this item to fully work or I will send you a full refund within seven days of you receiving the item. 3. I guarantee this item to power on. I have not tested the functionality of this item. If it does not power up. I will send you a full refund. Beyond that, no refunds will be offered. 4. Unable to test due to lack of knowledge or inappropriate power source. This item is sold AS-IS with no guarantees or refunds offered. 5. Failed to power up or testing and is being sold for parts. This item is sold AS-IS with no guarantees or refunds offered"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. We Sell Your Anything 4467 E 50th St Suite 600 Des Moines. IA 50317
|
|
|
MILLER DIALARC 250 AC/DC CONSTANT CURRENT STICK/TIG WELDER EXCELLENT CONDITION
MILLER DIALARC 250 AC/DC CONSTANT CURRENT STICK/TIG WELDER EXCELLENT CONDITION MILLER DIALARC 250 AC/DC CONSTANT CURRENT STICK/TIG WELDER MODEL# 907017 Great working condition Single-dial infinite current control simplifies and allows precise weld output adjustment; you always get exact heat needed to produce a better weld. Two weld ranges for both AC and DC welding allow greater control of weld performance for changes in welding conditions. Forced-draft cooling fan ensures cooler running product. Extending life of power source. Superior 6010 and 7018 Stick welding performance offers wide range of electrode versatility; welds difficult-to-weld materials. High output and duty cycle allow unit to handle nearly all Stick welding needs. Process Stick(SMAW) Air Carbon Arc Cutting and Gouging(CAC-A) 3/16 in carbons) Applications Light Industrial ... moreApplications Fabrication Maintenance and Repair Education Specifications Input Power Requires 1-Phase Power Rated Output AC/DC: 225 A at 29 VAC. 30% Duty Cycle AC/DC: 175 A at 27 VAC. 50% Duty Cycle Welding Amperage Ranges AC: Low: 35- 165. High: 105-300 Amps DC: Low: 35- 155. High: 90-265 Amps Net Weight 365 lb(166 kg) W/ Power Factor Correction 360 lb(163 kg) W/out Power Factor Correction SHIPPING WILL BE $225 TO A BUSINESS WITH A DOCK OR LIFT NEED A LIFT GATE? ADD $50 NEED SHIPPED TO A RESIDENTIAL ADDRESS WITHOUT A LIFT GATE? ADD $50 Please contact us for more shipping options Payment Options: We accept the below payment options. Please feel free to contact us with any questions regarding payments. You can reach us via email using"ask a question" in the eBay listing or by phone at 303-296-0324. Thank You! 1. Paypal: We accept Paypal payment for items up to and including $2000. Any items selling for greater than $2000 will require an alternative payment method. 2. Direct Credit Card payment to us over the phone. We accept Visa. Master Card, Discover, and American Express. Please call us at 303-296-0324 if you would like to pay for an item with a credit card. Credit
|
|
|
MILLER DIMENSION 400 CONSTANT CURRENT-VOLTAGE DC WELDING POWER SOURCE
Miller Dimension 400 Constant Voltage Constant Current Dc Arc Welding Power Source This is a welding power source in good condition. This unit was placed into storage after being removed from service. There are no cables included in this sale. Specifications: Input: Volts: 230/460 Amperes: 87/76/38 Three-Phase: 60 Hz. KW: 19 Output: Volts: 36 Amperes: 400 Duty Cycle: 100% Max OCV: 60 Voltage Range: 0-36 Comes as shown in pictures. Shipping: The following options are available to get this item to you: Option 1: This item is available for local pickup in the Holton. Michigan(49425) area. Option 2: This item can ship via freight. It will be the buyer's responsibility to set-up and pay for the freight service of your choosing. We will prep this item for freight shipping and have it ready to load when the truck arrives for a $50 charge. We ... morewill be happy to recommend freight companies. And if you need us to, request a couple of quotes for your consideration. Please contact us at 231.821.2125 or through eBay if you have any questions about this item.
|
|
|
MILLER MAXSTAR 175 CONSTANT CURRENT DC INVERTER WELDING POWER SOURCE
Inventory Number: 12130960043 Manufacturer: Description: MILLER MAXSTAR 175 CONSTANT CURRENT DC INVERTER WELDING POWER SOURCE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, 25.6VDC, 140A, WIRES CUT FOR REMOVAL FROM MACHINE BEING SCRAPPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify ... moreus at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full
|
|
|
MILLER WELDER, CP/CC-1500, CINSTANT POTENTIAL / CONSTANT CURRENT DC ARC WELDING
Welder came from a Navy Yard. For an additional $300.00 this machine can be inspected and load tested by U-Weld Services before shipment.
|
|
|
Optronic Lab Model 83 Precision Constant Current Source 45 or 200 Watts
AARDVARK SPARKS Optronic Lab Model 83 Precision Constant Current Source 45 or 200 Watts in Good Operational Condition All Items: I offer a money back guarantee. If you are not satisfied, simply return the item and I will refund the purchase price. Thank you for looking at my items! AARDVARK SPARKS AARDVARK SPARKS FEATURES THE LOWEST PRICES ON THE INTERNET! MONEY BACK GUARANTEE IF NOT SATISFIED!
|
|
|
POWER DESIGNS MODEL 2015R CONSTANT VOLTAGE CURRENT MANUAL R3-S31
POWER DESIGNS MODEL 2015R CONSTANT VOLTAGE CURRENT MANUAL R3-S31.
|
|
|
VINTAGE TECH ELECTRONIC KIKUSUI INTERNATIONAL CORP. CONSTANT CURRENT POWER JAPAN
THIS AUCTION IS FOR THE PICTURED VINTAGE TECH CATALOG OR BROCHURE CHECK OUT OUR OTHER LISTINGS
|
|
|
Miller Roughneck 2E Constant Current AC Arc Welding Generator W/ XL Engine
My father passed and I'm going through his garage. He was a mechanic for large machinery and vehicles. It's mounted on a cart and we'll include some hoses. Contact me if you want to inspect it. This item is working and was used by fatger in kaw. Tested a couple montges ago by co worker and just tested again by prospective buyer who didnt have the funds. Buyer pays Cash when picked up or Paypal. I won't ship it but you can have a delivery service pack it up for you. Item is located in Henderson. NV 89074 Posted with eBay Mobile Posted with
|
|
|
LIGHTECH LED 36 CC 700 P240DL CONSTANT CURRENT LED CONVERTER
LIGHTECH LED 36 CC 700 P240DL CONSTANT CURRENT LED CONVERTER FOR MORE INFO PLEASE CALL:01622 675653 PLEASE CHECK OUT OUR SHOP FOR MORE GREAT DEALS Shipping Alternative shipping options are available please contact us for details. Returns Procedure for Items Bought In Error Under the UK’s Distance Selling Regulations you have the right to cancel your purchases within 7 working days from the day after the day on which your item is delivered. This applies to all our products. Please contact us either through EBay or by phone to let us know the item you are returning and your reason why. Please note all items must be returned in their original packaging. Unfitted and in a re-saleable condition. You will be responsible for the costs of returning the goods to us and for your protection we recommend that you use a recorded delivery service. Please ... morealso ensure that you enclose your delivery slip in the parcel. We charge a 10% re-stocking fee on all goods returned to us that are bought in error. Returns Procedure For Items Received in Error or Faulty If you receive an item that has been sent out in error or is faulty please contact us so that we can arrange for a replacement to be shipped out or for a refund to be issued and for the incorrect/faulty item to be returned to us. Please note that all items returned as faulty will be checked upon receipt. PLEASE NOTE ALL OUR ITEMS CARRY AN IDENTIFYING SECURITY MARK WHICH WILL BE CHECKED WHEN ANY ITEM IS RETURNED TO US. Contact Details: A& I Discounts Unit 27 Integra Bircholt Road Maidstone Kent ME15 9GQ a.i.discounts@btinternet.com(01622)675653 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-144b0db7ea2-0x10e-
|
|
|
Crouse Hinds Constant Current Transformer NO RESERVE
380 volt constant current voltage regulator. New this equipment cost $36500. Get yours now with no reserve. Starting at 1 cent. WOW!
|
|
|
Constant Current Regulator CHIII Airport Lighting Crouse-Hinds
This constant current regulator was removed from an air force base in February. 2014 and is in good working order. Identification: FAA-L-828 Input: 480v. 60Hz, 23a Control: 120v. 60Hz Output: 10KW@ 6.6a Output current: 2.8. 3.4, 4.1, 5.2, 6.6a Brightness steps: 5 Part# 82860-10-8-66-05 I have several other sizes of these regulators. Please contact me for more information. Will load onto your truck or trailer at no cost to buyer.
|
|
|
VAC SCR Constant Current Power Supply, Dual Filament Supply, 240V/20A/1PH
VAC SCR Constant Current Power Supply. Dual Supply, 240V/20A/1PH Vacuum Atmospheres Company. VAC Hawthorne. CA, USA Model AJ3 SCR-CC Check Out: Purchase: Making purchases is easy and simple. To place an order for procurement. Please click the“Buy It Now” button. Follow to the next page for payment instructions. Payment: Click the“Pay Now” button at the top of the E-Bay page to proceed with the checkout and payment process. Payment must be made within 5 days of purchase. Accepted Forms: We accept PayPal. Or you may pay on your credit card via PayPal. When paying via PayPal. Payments must include your shipping address and should be submitted via the E-bay payment process. Sales Tax: For California customers. Sales tax is added and depends upon your location. If you are tax exempt. Please provide a copy of your Tax Exempt Certificate prior to ... morecheck out. Please do not send payment before receiving a revised invoice. Shipping: Shipping rates are the responsibility of the customer and are not refundable. Rates include handling. Packaging materials, label scanning and tracking information. Shipping rates are based upon the weight and dimensions of the package and your location. If we have packaging materials for smaller items. We include packaging and handling at no charge. If they are unavailable, we charge our cost. For larger capital equipment, please contact us for crating costs and exact weight prior to shipment as the crate will add weight to the tool set. Insurance: Should you prefer insurance on your item. Please inform us PRIOR to check out so this may be added to the shipping cost. Insurance is not added unless specifically requested by the buyer. Processing Time: Once payment has cleared. We make every effort to ship your item within 1-2 business days. Larger capital equipment which requires crating may require a longer time to build the crate. Freight Shipment: Freight Shipment is the responsibility of the buyer. Although we will do everything possible to assist you with this process. There may be
|
|
|
DC Constant Current Lesion Maker Grass Instruments D.C. L M 5 A
Up for sale is a Grass Instruments D.C. Constant Current Lesion Maker model D.C. L M 5 A This unit is in excellent cosmetic shape. Powers up. Built-in meter responds to current knob adjustment. Knob and all switches appear to work fine. 150 volt source output tested. No further testing conducted. Will pack carefully and ship promptly. Check out my other auctions for more great deals on lab equipment. Paypal please!
|
|
|
Nihon Kohden MS-210BK Constant Current Stimulation Unit
The Alternative Source Medical Nihon Kohden MS-210BK Constant Current Stimulation Unit Please inquire if you would like more pictures or information. Please view pictures- what is pictured is what is sold. This item is untested. But we would be happy to test upon request, no purchase necessary. This item is sold in as-is working condition. See below for details. Do not hesitate to contact me at Law@tasimed.com or 847.419.0123 We will do our very best to respond to all questions within 24 hours Our phone is operative Monday- Friday 9:00am to 5:00pm CST. Email is available 24 hours a day Our goal is make sure you are satisfied with your purchase. Please let us help Please pay promptly upon purchase of the item. Sales will be cancelled if payment is not received within three days after purchase. We accept all major credit cards- Visa. Mastercard, ... moreDiscover, American Express, PayPal, Items will not ship until funds have cleared. Our normal handling time is three days. But this may vary dependent on the item. Shipping and handling is paid for by the purchaser. We ship FedEx unless instructed otherwise. We can expedite shipping upon request. Contact us for a quote! We are happy to combine purchases to save on shipping costs. For international shipments. Purchaser is responsible for all Taxes, Custom, Duties and other fees for exportation/importation. Unless otherwise stated. All items are sold in As-Is Working Condition. That is to say that upon delivery, the units will work and function as expected. If the item does not function upon delivery contact me immediately at Law@tasimed.com or 847.419.0123 for a refund upon return of the defective items. Unless stated otherwise. We do not offer extended warranties beyond delivery and acceptance of the item by the purchaser. Please read and review the full listing before purchasing and ask questions if you have any concerns. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not
|
|
|
Grass Medical Instruments Constant Current Unit CCU 1 A Make an Offer!!!
This item is being offered with a"Buy it Now" price. But also with the"Best Offer" option. If you are interested in it, please consider making me an offer. You may be pleasantly surprised! For sale is a gently used Grass Constant Current Unit CCU 1 A. The unit shown in the photos is the exact one up for sale. It is in great cosmetic and functional condition. Will package carefully and ship promptly. Be sure and check out my other auctions for more great deals on instruments and related items. Thanks for looking and best of luck if you bid! Paypal please! A;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14500c92f0e-0x107-
|
|
|
Mega-Arc 4030D 30Amp Constant Current Diesel Engine-Driven Welding Generator Man
Mega-Arc 4030D 30 Amp Constant Current Diesel Engine-Driven Welding Generator Owner's Manual For the Following Specs: 6298C-1 6298D-1 Revised December 1. 1997 If you have any questions. Please let me know. Thanks for looking.
|
|
|
Grass Constant Current Unit Model CCU 1A
Constant Current Unit has not been tested. Item is in good condition. Item is ready to go. Item will be sold as is.
|
|
|
Miller SRH-303 Constant Current Welding Power Supply – 300 amp
Miller SRH-303 Constant Current Welding Power Supply– 300 amp output– 60% Duty Cycle. Input is 230/460V- 60Hz– 3PH. This is a heavy duty welder that runs super smooth– this is an old COPPER wound transformer/rectifier machine! I have the manuals and it is on a rolling cart with 6” Steel Wheels making it easy to move about the shop if needed.
|
|
|
ADVANCED ILLUMINATION CS400 CONSTANT CURRENT SOURCE 24 Volt Power Supply
ADVANCED ILLUMINATION CS400 CONSTANT CURRENT SOURCE 24 Volt Power Supply Serial# 19801011 PS-24V-001-AI(O-1895) Shipping Policy: We ship within 24 hours of receiving payment! if paid for Sunday-Thursday) We ship most of our items using USPS. If we overcharged you for economy shipping. We will ship your package using a faster service so that you get your item/s sooner. International Shipping- We ship internationally using Ebay's Global Shipping Program. Click on the shipping tab to see if you qualify! Payment: We accept paypal payments. Credit card payments through paypal, or cash on pickup. Warranty: We offer a 14 day DOA warranty on all of our products. Unless listed as a parts/not working machine or specified in our return policy at the top of the page. Returns or Exchanges: If your product is defective on arrival. We ask that you ship ... moreit back to us and we will give you money back or exchange it with another(based on quantities available) Thank you for visiting us!
|
|
|
JOYAL WELDER CONSTANT CURRENT CONTROLLER MODEL JSCC 1CCSR61120R 230 VOLT
JOYAL WELDER CONSTANT CURRENT CONTROLLER MODEL JSCC 1CCSR61120R 230 VOLT-12W KVA 60 Hz SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS IWRA 26 VINCE
|
|
|
LCD Monitor Power Constant Current Board ILPI-240 For DELL IN2020M E1912H PCB
Details: High in Quality Durable and best match for your device. Please make sure your device′s model before biding. Input: 100V-240VAC(50-60Hz) Constant current output interface is 6 Pin. Warranty: 30 days Compatible with model: DELL IN2020M E1912H P/N: ILPI-240 Package: 1x Power Board Payment: 1 We only accept PAYPAL. 2 We only ship to your paypal address. We will take no responsibility of the wrong shipping address caused by buyer's negligence. Shipping& Return: 1 All items are checked and packed in good condition before dispatch. 2 We refund or exchange the item if it's damaged or lost. The shipping fee is not refundable. Please contact us by email before return the goods. 3 The custom taxes and value-added tax are not included in the item price and shipping charge. 4 If you find any defect in our items. Please contact us ... morewithin 7 days of receipt item. 5 Delivery time: Item will be shipped out within 1-2 days by Standard Air Mail after received payment. 7-15 business day to USA; 10-21 business days to United Kingdom/Canada; Other countries at least 21 business days. Maybe longer. Feedback: 1 Once your item arrives in satisfactory condition. Please leave a positive feedback for us. Our automatic system will do the same for you. 2 If you have any question regarding the transaction. Please contact us before leaving neutral or negative feedback, we will work with you to completely resolve any issues you may have. Thank you!
|
|
|
Electronic Measurements C600 Series Constant-Current Program. Power Supply Manua
Electronic Measurements C600 Series Constant-Current Program. Power Supply Manual Manuals in good used condition. 14 day right of return. General description: Electronic Measurements C600 Series Constant-Current Program. Power Supply Manual.54661 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ... moreship via Fed Ex or USPS. Approx Weight: 1 lb. Boxed Dim: 15x12 Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: MD09E Powered by
|
|
|
Crouse Hinds CH111 Constant current transformer dry type
Identification: FAA-L-828 Input: 480v. 60Hz, 23a Control: 120v. 60Hz Output: 10KW@ 6.6a Output current: 2.8. 3.4, 4.1, 5.2, 6.6a Brightness steps: 5 Part# 82860-10-8-66-05
|
|
|
LED-Down light KIT 3 CONSTANT CURRENT LIGHTS AND LED DRIVER LLVC12A UNI *
LED-Down light KIT 3 CONSTANT CURRENT LIGHTS AND LED DRIVER LLVC12A UN. UNIT IS IN WORKING ORDER. PL EASE REVIEW PICTURES FOR MORE DETAILS AND INFO ON CONDITION. THE ITEM(S) IN THE PICTURES WILL BE THE ITEM(S) YOU WILL BE RECEIVING. EVERYTHING AND ONLY WHAT IS IN THE PICTURES IS INCLUDED. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS ... morePOSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1456e0d2bd9-0x112-
|
|
|
Big Blue 400D Constant Current Welding Generator Trailer Diesel Stick Welder....
Big Blue 400D Constant Current Welding Generator Trailer Diesel Stick Welder. Pictures/ Video/ Media: Big Blue 400D Constant Current Welding Generator Trailer Diesel Stick Welder. Good generator and welder mounted on trailer. Unit operates well. Have a live video chat via skype. My skype ID is: Seth.j.fenby. We can help you arrange freight. We deal with several different trucking companies and can get very competitive rates. If you would like a quick shipping rate please email. Text or call me with your zip code! We accept many different payment methods. Contact us for further information! Video demonstrations of equipment available at www. youtube. com/QUequipment05 We have several finance companies that we deal with. If you are interested. Contact us for a credit application! If you are interested. Feel free to send a third party out to ... moreinspect the equipment you are intrested in purchasing. Go to www. wegolook. com. They have a good reputation and will get you all the information you want at a very reasonable rate! Call or text Seth anytime at(814)487-8310. Thank you for viewing our equipment and have a great day! This item is being sold as is where is with no warranty or guarantee expressed or implied. Click the"facebook" logo above! Add me as a friend and keep up with my personal activities, contact info and join the QUE SALES INC fan page to get company updates! SMS or MMS my cell at anytime: 814-487-8310. View the about me page. Shipping Email zip for a rate. Need to talk? Call 814-487-8310! anytime. Email through"ebay ask a seller a question" and we'll get back to you ASAP! About Us quesalesinc_com is an internet based eBay company. We specialize in buying. Selling and marketing all types of new and used construction and lawn equipment worldwide. We are located in south central Pennsylvania. Contact us by phone at 814-487-8310 or email us through"ebay ask a seller a question" and we'll get back to you ASAP! Payment Payment methods accepted: We have many different payme
|
|
|
Amplaid Constant Current Isolator stimulator ISOL ES-2
Constant current isolator. Amplaid model ISOL or ES-2 is what is under the sticker. Not tested. Sold as is- no returns. Shipping to the US will be $8. Paypal is accepted.
|
|
|
Hoyal JSCC-1-MAA 208 VAC 1 Phase Constant Current Controller (STE2011)
Inventory# STE2011 Mfg/Make: Joyal Model/Catalog# JSCC-1-MAA Serial# SW-92043 Power: 208 VAC. 1 Phase Dimensions: 15" x 10" x 11" Description: Controller For parts only.
|
|
|
TDK Lambda EMS 60-80-2-D 5KW High Current Constant Voltage 60V 80A Power Supply
TDK Lambda EMS 60-80-2-D 5KW High Current Constant Voltage 60V 80A Power Suppl FREE PICK UP See actual picture Here is the description from manufacturer: The EMS series are high power switch mode AC to DC power supplies for applications where high efficiency. Precise regulation and a high degree of packing density and light weight are required. This series of high frequency switching power supplies is designed to operate as a source of constant current/constant voltage with automatic crossover. All EMS Power Supplies are fully programmable via an analog programming or(optional) RSTL digital interface. Allowing for systems integration to meet your specific requirements. The EMS series represents an important element in our broad line of switching power supplies. Beginning in 1969 with multiple patents awarded. TDK-Lambda Americas has continued ... moreto invest in the development and engineering of the EMS series. Successful applications include semiconductor processing, medical, scientific and research laboratories. The EMS series offers the best of customer tested and application proven features, while incorporating the latest advancements in technology for the user of power conversion systems. Specifications, AC Input 208 VAC three phase, 400VAC three phase(CE) All models 50/60 Hz Softstart AC inrush Consult factory for other inputs. Output Characteristics Regulation: 0.1% Stability: 0.05% Transient response: 650 microseconds for 30% load change(models up to 20 VDC) Operating temperature: 0-50 Deg C full output. Derate above 50 Deg C. Protective Features Overvoltage(up to 300 VDC outputs) Overtemperature Overcurrent Programming Front panel controls and remote analog resistance. Voltage and current programming(standard) 0-5 V and 0-10 V(optional) Internal RS232 and IEEE-488(optional) Embedded IEEE/RS232 available as option on 1kW models in 1U high chassis. Mechanical Size: 19" W x 5 1/4" H x 22" D Weight: 5kW- 60lbs/27kg. Standard Model Listing Model Number Rated Power(Watts) Output Voltage(Volts) Output
|
|
|
LAMBDA ESS 100-2-D High Power 100A Constant Current Programmable Power Supply
LAMBDA VARIAN EMS 250-20-2-D 0-250V 20A ACCELERATOR SOLENOID POWER SUPPLY FREE PICK UP See actual picture Here is the information from manufacturer web site. Please check it again for any changes by manufacturer: The ESS is a high power Constant Voltage. Constant Current Programmable DC power supply. Since its introduction in 1995, the ESS has evolved into one of the most reliable, compact, high performance power supplies available. It features a pulse-by-pulse current limit which provides excellent performance in demanding high current applications such as RF Amplifiers, DC Motors and Magnetic Coils. The many standard features make it an excellent choice for both OEM and laboratory applications. This very high density supply provides 10 kW or 15 kW in a 5U(8.75" high rack-mount package. Outputs are available to 600 V(500 V. 15 kW) and ... more1400 amps. Front panel includes potentiometers for voltage and current control along with meters for both. LED indicators clearly show Overvoltage Condition. Inverter Failure, Phase Loss, and Control Failure. In addition to Front Panel Controls. The Rear Panel offers analog programming and monitoring of voltage and current as well as an optional RS232/IEEE 488 interface. For higher power systems, ESS power supplies may be connected in series or parallel. Contact factory for details. TDK-Lambda Americas can provide a wide range of custom features in the ESS package. Some of them include: special front panel color. Safety and control interlocks, custom voltage and/or current outputs, and precision current monitor. Specifications, AC Input 208 VAC(190-250 V) standard) 380 VAC 5 wire(342-418 V) optional) 400 VAC 5 wire(360-440 C) CE Marked(Optional) 415 VAC 5 wire(396-484 V) optional) 480 VAC 5 wire(432-528 V) optional) All models 50/60 Hz Softstart AC inrush Power Factor 0.93. Output Characteristics Regulation: 0.1% Stability: 0.05% Efficiency: 85-91% Transient Response: 650 microseconds for 30% load change(models up to 20 VDC) Operating temperature: 0-50 deg C Full o
|
|
|
LAKE SHORE CRYOTRONICS CONSTANT CURRENT POWER SUPPLY 1UA-3MA
LAKE SHORE CRYOTRONICS CONSTANT CURRENT POWER SUPPLY 1UA-3MA Need a regulated current supply that covers 1 uA to 3 mA? This one from Lake Shore was made to be used in Cryo applications like sensor diode biasing. But works fine as a general purpose lab current source. Green terminals& the EXT position lets you set it to a current between the calibrated switch settings. Use a varia ble resistance here. For normal use as a calibrated current source, nothing is connected to the green terminals. MANUAL: None. POWER: 120 VA C 50/60 HZ. Power cord attached. CONDITION: A It is used& other than some writing on the top. Sticker residue& some small scratches. In good condition. TEST RESULTS: A I have tested it& it works just fine, calibration is very good. Thanks for Looking! ITEMS ARE SHIPPED MONDAY, WEDNESDAY& SATURDAY ACTUAL WEIGHT ... moreOF ITEM: 2 LBS ACTUAL SIZE OF ITEM: 7" X 6" X 2" WEIGHT OF SHIPPING BOX: 4 LBS SIZE OF SHIPPING BOX: 12" X 9" X 6" SHIPPING COST ESTIMATE: CONUS(lower 48 states) ONLY Lowest rate is shown by eBay. AK. HI, PR& OVERSEAS: If S&H is not automatically shown, please click REQUEST TOTAL. An invoice with your correct S&H will be sent. FAST* $11.35 USPS Priority Med. FRB + $ 3.00 Handling& Packing Insurance& Tracking Number Included Total S&H = $14.35 PM. THE DREADED"FINE PRINT" Recently updated 0 2- 1 1-1 4) Please read the complete listing before buying this item. FJT is constantly listing more items, some for auction(always a low starting bid) and many others on fixed price(Buy It Now) So. If you like electronic, industrial& scientific stuff, please have a look at my other items& save FJT as a favorite seller. Money saving combined shipping is offered! This can drastically reduce shipping/item when you buy multiple items. If you buy/win multiple items. Don't pay yet, because the S&H eBay shows is very likely to be wrong(too high) Please send a message from your last item when done. I will figure the l
|
|
|
LINCOLS IDEALARC MODEL DC-1000 CONSTANT VOLTAGE CONSTANT CURRENT DC ARC WELDER
CATALOG SPECS. MUST BE VERIFIED! PLEASE CALL JIM FOR MORE INFO 7146121480 Idealarc® DC-1000 Subarc Welder Top Features The Idealarc DC-1000 welder for submerged arc applications offers multi-process flexibility for semiautomatic and automatic welding. 500 amp output connections, Single range control- for precise output control and easy operation. Terminal strip and output studs- for remote connections and cable. Low profile case- allows installation under a workbench and for stacking up to 2 machines to conserve floor space. Input Power 230/460/3/60, Processes MIG. Flux-Cored, Submerged Arc, Gouging Industrial DC Multi-Process Welder The DC-1000 offers 1300 amps of smooth DC output. Combining pure welding power with multi-process flexibility for semiautomatic and automatic welding. 500 amp output connections- provide enhanced arc characteristics ... morefor low amperage submerged arc and MIG welding procedures. Single range control- for precise output control and easy operation. Terminal strip and output studs- for remote connections and cable. Low profile case- allows installation under a workbench and for stacking up to 2 machines to conserve floor space. Removable side panels- for easy access to internal parts. Internal components- including windings. Rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion. Seven-year warranty- on power rectifier. Input Power 230/460/3/60, Rated Output 1000A/44V/100% Input Current 193/96.5A, Output Range 150-1300A DC, 16-46V, Dimensions(H x W x D) 30.7 in x 22.25 in x 39 in(781 mm x 565 mm x 991 mm) Net Weight 875.000 lbs(396.900 kg)
|
|
 |