|
Carnfeldt GL-361-ONL OLP CTP On-Line Film Processor Dolev 800 Imagesetter PARTS
Search our eBay Store! Carnfeldt GL-361-ONL OLP CTP On-Line Film Processor Dolev 800 Imagesetter PARTS SKU: JV-RYA-C-CARNDOL8Z Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Carnfeldt GL-361-ONL OLP CTP On-Line Film Processor for Dolev 800 Imagesetter PARTS Model: GL-361-ONL. Physical Condition: Fair. Significant signs of use We do not have the necessary resources in our facility to test this unit. Unit’s rear right panel does not fix correctly to unit. As such. This unit is being sold as-is for parts or repair. Power cable is not included. No additional rollers. ... moreCables, or other accessories are included. BEING SOLD AS-IS FOR PARTS OR REPAIR. Dimensions(L" W" H" 56* 52* 41 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to
|
|
|
Xitron Highwater interface rip board for CTP or imagesetter
Pulled from a working system. I have a few available and the cables that go with them. Xitron Highwater Intrerface card for CTP or imagesetter. Many parts available for all CTP. Imagesetters and wide format printers. Tech support available. atlanticcomp.com
|
|
|
Agfa Avantra imagesetter control panel
Agfa Avantra control panel. Pulled from a working machine. Fully functional. Parts for all imagesetters. CTP, wide format printers. atlanticcomp.com tech support available.
|
|
|
Agfa Avantra imagesetter SDIM board
Agfa Avantra imagesetter SDIM controller board. Pulled from a working machine. Works perfectly. Parts available for most imagesetters. CTP processors and wide format printers. Tech support available. atlanticcomp.com
|
|
|
Agfa Selectset imagesetter Motherboard
Agfa Selectset mainboard. Pulled from a working machine. 6 available. Many parts for imagesetters. CTP, processors and wide format printers. We sell ink for all AGFA PRINTERS. atlanticcomp.com
|
|
|
PrePRESS® PANTHER PRO 62 (cm) IMAGESETTER TAKE-UP CASSETTE
PrePRESS® PANTHER PRO 62(cm) IMAGESETTER TAKE-UP CASSETTE Consists of a USED Take-up Cassette for the PrePRESS® PANTHER PRO 62 Imagesetter. This Cassette is in excellent condition. Cassette is adjustable for film widths up to 24 5/8" 62 cm) wide. The Panther Pro 62 is a great newspaper imagesetter and we have one in stock. This is one of over two hundred imagesetter supply and take-up cassettes that we have in stock. Please let us know if you have any questions. Thanks for looking. Free shipping in the USA. Note: Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs. All items are subject to prior sale. All of our ... moreitems may be advertised locally and subject to prior sale and this ad being canceled.
|
|
|
ULTRE 72 P IMAGESETTER TAKE-UP CASSETTE
ULTRE 72 P IMAGESETTER TAKE-UP CASSETTE Consists of a USED ULTRE 72 P IMAGESETTER TAKE-UP CASSETTE. Cassette will also work with Ultre 3000 series imagesetter. Item is in good working condition. This is one of over two hundred imagesetter supply and take-up cassettes that we have in stock. Please let us know if you have any questions. Thanks for looking. Free shipping in the USA. Note: Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs.
|
|
|
PrePRESS PANTHER 13.3" IMAGESETTER HIGH CAPACITY TAKE-UP CASSETTE
PrePRESS PANTHER 13.3" IMAGESETTER HIGH CAPACITY TAKE-UP CASSETTE Consists of a USED PrePRESS PANTHER 13.3" IMAGESETTER HIGH CAPACITY TAKE-UP CASSETTE. Cassette is in excellent condition. This is one of over two hundred imagesetter supply and take-up cassettes that we have in stock. Please let us know if you have any questions. Thanks for looking. Free shipping in the USA. Note: Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs.
|
|
|
PrePRESS PANTHER 34P PLATESETTER / IMAGESETTER OPTIONAL TAKE-UP CASSETTE
PrePRESS PANTHER 34P PLATESETTER/ IMAGESETTER OPTIONAL TAKE-UP CASSETTE Consists of a 13.3" OPTIONAL Take-up Cassette for the PrePRESS PANTHER 34P PLATESETTER/ Imagesetter. This is a special Cassette that allowed the use of imagesetting film. Cassette is manufactured with additional parts that direct the imagesetting film correctly into the cassette. This is one of over two hundred imagesetter supply and take-up cassettes that we have in stock. Please let us know if you have any questions. Thanks for looking. Free shipping in the USA. Note: Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs. Photo: 100-0405-1.jpg
|
|
|
AGFA® APOGEE Version 3.0.1 Imagesetter RIP
Consists of an AGFA® APOGEE TAIPAN Postscript Level Three(3) RIP for PC. Version is 3.0.1. Includes RIP software. AGFA® APIS PAC PCI Interface Card and Security Dongle. APIS INTERFACE ACRD AND DONGLE ARE NOT SHOWN IN PHOTO BUT ARE INCLUDED. Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs. All items are subject to prior sale. All of our items may be advertised locally and subject to prior sale and this ad being canceled. Photo may be of exact or similar RIP an APIS card. We usually have several in stock.
|
|
|
Escher Grad 820 Drum Imagesetter and Film Processor with manuals software
Complete Working Pre-Press Printing Lot here- does need maintenance. $1500 approx to run and work correctly. will ship at buyers expense plus crating fee(4 crates possibly at about 2.400 lbs. total) Delivery must be fully insured for replacement value. This equipment was last used in 2009, can be inspected prior to making an offer and was well maintained while in use. This company is ready to sell, all serious offers will be considered. The machine needs about a $1800 repair, and will be done for buyer if agreement can be made. Can be sold as is also. In this lot you will receive: 2000 Eascher-Grad 8200 Large Format Drum Imagesetter and Film Processor Serial No. 5004 110 volts/220 amps Freq. 60/50- pat no. 5.206,869 Dimensions of dual units is approx 5' wide and 9' long. Glunz& Jensen Model 860 SN 90167-0115 220 volt 1/3 phase- ... more23 amps 5000 watts Computer Tower/Monitor on wall mount Visual Sensations/APC Smart UPS Compressor- with hour meter at 3454.22. 110 volts- 60 hz this unit is approx 28" x 36" x 34" tall. More details will follow. Original purchase information also available. This entire lot sold for $156.000+, replacement value today new we estimate at over $225,000. Questions. Please ask. Vicki Wiederkehr 812-630-5924
|
|
|
AS IS/ For Parts AGFA select set 5000 16" drum imagesetter
As-Is Not Sure what the problem is. No parts taken out. Selling For Parts ONLY! LOCAL PICKUP ONLY in LOS ANGELES. CA. 15.7" x 22" image area Helium Neon laser Internal drum technology Resolutions of 1200 and 2400. Or 1200, 2400, and 3600dpi +/ 2 mil repeatability Dot size is 7.5 microns@ 3600dpi. 10 microns@ 2400dpi, and 20 microns@ 1200dpi Images maximum image area in 1 minute@ 1200dpi Accepts 10" 13.3" and 16" wide material Internal Punch Dimensions: 45"W x 38"H x 24"D. Weight: 425lb s Have A Nice Day! o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e9b0e22e5-0xfe-
|
|
|
OYO LIBERATOR 1800 IMAGESETTER/IMAGE SETTER 600dpi
You are bidding on an OYO Liberator 1800. This is an 18" wide thermal imagesetter that needs a new roller and print head. I am the original owner and have used this machine for the last 10 years. This technology is fast and accurate. I have replaced the roller once but it needs a new one. The print head also needs to be replaced as well. This machine cost me over $30k new and repair costs are about $7k. I still run film on this machine but only use the side part where the print head still seems to be ok. This OYO also comes with the stand. This machine has many years left on it. Please ask any questions before bidding. Shipping cost will be actual cost and pick-up is available as well. This unit is sold as is with no warranties and no returns. Power cord and scsi cable will be included along with the mac card. Good luck! Payment with ... morePayPal only.
|
|
|
Fuji Luxel F-9000 Sumo Imagesetter 3 Laser System
12.00 Normal 0 false false false EN-US X-NONE X-NONE Fuji Luxel F-9000(Sumo) Serial#ML82A00302: manufactured 11/1999- installation in mid 2000. With full maintenance contract- very good condition- triple beam laser system· Laser 1: 20186 Laser 2: 00437 Laser 3: 00299- Dual-cassette- internal punch. Carlson configuration- with On Line Processor Glunz& Jensen AP 1250- media widths: 559mm(22"768mm(30"1067mm(42"1130(44.5" media thickness: 0.1mm(004" 0.18mm(007" max. imaging size 1122 x 930 mm(44.1"x36.6" max. resolution 3657 dpi This imagesetter is very fast. It can scan a full 8 page signature at 2500 dpi in approximately 60 seconds, lower resolution is even faster. Machine is presently locked down and ready to crate. We shall accommodate to ship anywhere.
|
|
|
AGFA AVANTRA 20 IMAGESETTER
GENUINE SOLD AND SHIPPED FROM USA! Shipping is FREE Product Specifications: Description All items in picture included! HIGH QUALITY IMAGESETTER FOR SMALL PRINT SHOPS AND COPY CENTERS. Fully tested and it is in excellent condition. Equipment will be shipped by ESTES-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Please read below terms before bidding: Payment: We accept Paypal ONLY. Payment must be made within 3 days of the end of the auction. Otherwise. We will close the auction and report to EBAY to deal with this. Shipment: We will ship to the address provided by PayPal ONLY. We will ship the item within 4 business days once we have recieved your payment. Prompt payment means a prompt shipment. Thank You SquareTrade © squaretrade warranty v2.0
|
|
|
ECRM EV-JETSETTER 4500 IMAGESETTER (with Inline Processor)
ECRM EV-JETSETTER 4500 IMAGESETTER(with Inline Processor) includes: Imagesetter. RIP Station, and inline Film Processor, 3 cassettes and manuels Asking $3500(only cash will be accepted as payment. No exceptions) also available NuArc Flip Top PlateBurner and Plate Processor(Duros D-32) Take everything for $4500 If interested please contact Vito at Superior Printing 718/625.4227
|
|
|
Konica EV Jetsetter Imagesetter 4100 Series 2003 Model
The-RedBag A lways g reat b uys@ THE RED BAG now on ebay! Contact Us More COOL Stuff! Konica EV Jetsetter 41000-01 2003 Model DESCRIPTION You are bidding on a Konica EV Jetsetter 4100 Series Imagesetter. This item is in good physical condition and was removed from a working environment. This only includes the Jetsetter as you see it pictured and doesn't have any cables. Software or any other accessories included with it. This powers up and initializes to a ready screen but that is as far as we can test it so we have to sell it AS IS. This was from an operational Print shop who was foreclosed on. RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received as described. All returns must be authorized with an RMA# Items must be the original ... morecondition and be approved/received within specified timeframe. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded. Auction items include only what is in the eBay picture(s) unless otherwise specified in the description. By placing a bid on this item. Bidder agrees to the terms and conditions listed in this auction. Thank you. SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere? Pay via cashiers check. o) Let's hope this does not occur. However in the event that an item is damaged during transit, buyer will need to notate that with the driver before signing for the package, keep the box and all packaging materials and contact us within 2 business days of receipt of item. This item will ship freight. Please email us your contact number after
|
|
|
Screen Imagesetter. Price reduced!!
Screen Imagesetter 4 up Drum with online processor Screen HQ Rip w. G4 mac computer Up to 4064 DPI.Max image area 22"x25.8 Resolution:1200-4064dpi Max line screen 300 Media:Film.RCA paper or poly roll plates LD-283-Q online processor Image speed 254mm/min@2400 dpi OLP dimensions:47.3"width x 39.4" heights x 66" depth Equipment was cleaned.Tested and ready to ship All units in great working condition Any questions please contact Ron 201.519.0219 email: Info@Zenith-graphics.com Posted with
|
|
|
XANTE XIMP-1 IMPRESSIA METAL CTP IMAGING PRE-PRESS PLATESETTER IMAGESETTER PLATE
XANTE XIMP-1 IMPRESSIA METAL CTP IMAGING PRE-PRESS PLATESETTER IMAGESETTER PLATE'Most items ship within 24 hours after confirmed payment is received! SearchBy9- 37300 | Location: B51 | Lister: LISTERS NAME HERE' | Tester: TESTER NAME HERE' | Tech: | Quan: 0 | List: 1 | Duplicate: False | Plan: D' | Amazon: Size: 30x36x36 Weight: 135 | Start: $0.00 | BIN: $1999.98 | Type: Fixed Price | $hippingBump: $0 | Date: 5/7/2012 | Condition: For parts or not working. | CONSIGNOR VIDE O | RESEARCH LINK | Created: 5/7/2012 | Business& Industrial Printing& Graphic Arts PrePress Equipment Photos are of THE ACTUAL item and all of the components for sale. CLICK HERE FOR ADDITIONAL PHOTOS PRODUCT DETAILS TESTING& FUNCTIONAL NOTES: This item successfully powers on. Item fully powers on via power cord. Item display screen illuminates ... moreand functions properly. Item knobs and buttons function properly.Not able to further test due to not having the appropriate equipment. We have no reason to believe this item is not working however its functioning status is unknown; we are unable to test the item due to our lack of knowledge and lack of proper equipment for testing. Please feel free to ask us any questions. Therefore we are selling this item without a guarantee. Please bid accordingly! FULL FUNCTIONAL CONDITION UNKNOWN- ITEM ONLY GUARANTEED TO BE AS PICTURED: Our descriptions. And photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive the quantity, components, and level of operation shown in the photos. This does not not represent a guarantee or warranty about the item's functionality beyond what is depicted in the photos. In our experience of selling over 10,000 such items, customers are satisfied with these purchases 95% of the time. This means that 5% of the time we expect an item to have limited functionality and/or require repairs. We expect to receive less money for items sold in this condition; as a trade-off, we do not accept
|
|
|
Escher-Grad 9400XL large format imagesetter & Kodak 125 processor
9400 large format imagesetter and Kodak125 processor with fuji chempact mixers. system is in Very good well maintained condition complete with everything you see. And a bunch of extra new parts in boxes. It is located in Syracuse, ny It will be all disconected and ready for transport, call 315-729-3670 with any questions Posted with
|
|
|
Agfa Avantra imagesetter JAM WHEEL SENSOR tested
This is tested and will work in all the Avantra line of imagers
|
|
|
ECRM VR series imagesetter control panel AO21548
This was removed from a working imagesetter AO21548
|
|
|
Crane for Avantra imagesetter OLP 30" and 44"
If you have ever lifted one of those racks. You know you need this. motor tested
|
|
|
control panel for Accuset imagesetter Agfa
this is tested and fully functional
|
|
|
Input SUPPLY Cassette For Ecrm Mako Series Imagesetter Ao27451
Used in good working order. A little scratched on bottom Posted with
|
|
|
AGFA Avantra 20/25-OLP Processor/SelectSet Avantra 25E Imagesetter/Solid Mixers
AGFA Avantra 20/25-OLP Online Prossesor with AGFA SelectSet Avantra 25E Imagesetter(approx. 250' of negative film included inside) and AGFA Solid Mixers for developer and fixer. Manuals included. Units were pulled out in good working order No RIP included I'll be happy to answer any questions Buyer arranges freight Handling extra
|
|
|
Linotype Linotronic 300 / 330 Laser Imagesetter Manual
Manual Model: Linotype Linotronic 300/330 Laser Imagesetter Manual Type: Operator's Manuals Total Pages: 88 Delivery Note: This manual is in PDF format and will be emailed to the winner. If paying via PayPal. Your manual will be automatically emailed immediately following your payment. Linotype Linotronic 300/500 Series Operator's Manual Linotype-Hell PostScript RIP 40/50 Operator's Manual AGFA Rapiline 17/26/28 Operator's. Parts, Installation Manual Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Dolev 800P Imagesetter 2 piece full unit -Make Offer!!
This dolev 800 is a complete two piece unit used but in great shape please let me know if you are interested in anyway thanks! if you need it shipped that is your responsibility to take care of arrange and insure. Once unit is out of my hands it is no longer my responsibility*
|
|
|
Kodak 710 Imagesetter (28") Film Processor w/5 EXTRA ROLLER RACKS & PARTS !!!
Item being offered is a used(but in really nice condition) Kodak Kodamatic 710 Imagesetter Film Processor complete with manuals and many spare parts(see the final few pictures)includes 5(five) roller racks(see last 3 pictures) The unit is exceptionally clean, was in working condition when disconnected, but is being sold'as-is' This unit handles up to 28 inch film and was being used in a Pre-Press plate processing operation. We will answer any questions as quickly as possible and can provide additional pictures if needed. Includes a PALLET of 5+ roller cage assemblies. Extra rollers and MANY SPARE PARTS. See the last 3 pictures. Packing and shipping will need to be arranged at time of purchase.
|
|
|
HIGHWATER 776 - 30 PCI Imagesetter Interface Card for AGFA
Consists of a single HIGHWATER PCI IMAGESETTER Interface Card for AGFA® Imagesetters. Model number is 776- 30. Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs. All items are subject to prior sale. All of our items may be advertised locally and subject to prior sale and this ad being canceled.
|
|
|
AGFA® ACCUSET IMAGESETTER SUPPLY CASSETTE
Consists of a USED AGFA® Accuset Imagesetter Supply Cassette. Item is dusty but in good condition. Can be used with 800. 1000, 1200, 1400 and 1500 series Accuset imagesetters. This is one of over two hundred imagesetter supply and take-up cassettes that we have in stock. Please let us know if you have any questions. Thanks for looking. Free shipping in the USA. Note: Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs.
|
|
|
Stoesser Plate Punch for Heidelberg Quicksetter Imagesetter + NICE + NO RESERVE!
Manufacturer: Stoesser Model: Plate Punch Condition: This punch is in good working condition. Used With: This punch was being used with a Heidelberg Quicksetter. It is in nice condition. Note: This punch is being sold for Michigan City Area Schools in Michigan City. IN. Please contact Tristan at 248-672-5751 with any questions. Please view our eBay store to see the other items we are selling for this district. Shipping: There is no shipping available for any items sold from Michigan City Area Schools. LOCAL PICK-UP ONLY. Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Michigan City Area Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ede6a6f87-0x107-
|
|
|
AGFA Compugraphic 9400 Imagesetter & Accessories
This is a Agfa Compugraphic Imagesetter in Excellent Cosmetic Condition! We were unable to test this unit other then to power it on. Powers on and responds! It came from a Industrial Lab and was listed in"Good/Operable" Condition. This is Model 9400 in Excellent Cosmetic Condition. Features: 115 V- 50/60 Hz- Part Number M00026-001- Input Buffer 1.5 MB Includes: Manuals- Software- Extra Cartridge- Everything Pictured! Defects: None Noted This item comes with our No Hassle Return Policy. We don't believe in that"As Is" Nonsense! LEGAL STUFF: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I may verify your status as an authorized ... morepurchaser of this item before shipping of the item. We ship WORLDWIDE! Our goal is 100% customer satisfaction! International Bidders: Please contact us for shipping quote before bidding. As always. Please feel free to e-mail us with any questions. Please note: We have no history on this item. Cosmetically it looks fine. But we don't have the capabilities to fully test. No accessories other then what is pictured is included with this item. We are Med Express- Valley City OH 44280. 330) 220-0111. M;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13efc9504d4-0xff-
|
|
|
14" Film Cassette For Ecrm VRL imagesetter
1 4" film casse tte for ECRM VRL imagese tter. Came off a VRL36. Per fect working condition. Excellent shape. Has nu mbers on end: A0 215 0 3 S/N 1109
|
|
|
12" Film Cassette For Ecrm VRL imagesetter
1 2" film casse tte for ECRM VRL imagese tter. Came off a VRL36. Per fect working condition. Excellent shape. Has nu mbers on end: A0 215 02104 S/N 00445 ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13effb5cf3e-0x101-
|
|
|
Herkules Pro Imagesetter
HerkulesPro imagesetter capable of running film 4up image area 21.5 x 29.5” Glanzand Jensen on line processor with short bridge DeltaRip V5.0 with trapping Computer+ IS tower Allchemistry tanks This machine has been under maintenance contract since it was purchased All original shipping brackets are with the machine. Machine located in Farmingdale. NY, Send all inquiries to
|
|
|
Agfa Accuset 1500 Imagesetter / Screen D Vertical Camera / Film Processor
These items were all in working condition when last used. The feeder roller on the imagesetter may need to be replaced. All film& chemistry on hand will be included in auction. Local pickup only in Hackensack NJ. On May-30-13 at 17:20:31 PDT. Seller added the following information: These items were all in working condition when last used. The feeder roller on the imagesetter may need to be replaced. All film& chemistry on hand will be included in auction. Local pickup only in Hackensack NJ. Pickup must be within 1 week of auction closing.
|
|
|
SCITEX DOLEV 4 Press FILM Imagesetter
FOR SALE OFFERED USED/REFURBISHED SCITEX. DOLEV4PRESS IMAGESETTER. INVENTORY REDUCTION. WE CAN INSTALL. SUPPLY OFF-LINE OR ON-LINE PROCESSOR, PSM RIP or ANY OTHER OF YOUR CHOICE, OR AS IS- SPARE UNIT. THIS DOLEV CAME OUT OF CLEAN PRE-PRESS OPERATION. WHICH CONVERTED TO CTP. THE UNIT WAS CHECKED BY SCITEX TECHNICIAN, PERFORMED ALL MAINTENANCE AND READY FOR PRODUCTION. SHIPPING CAN BE ARRANGED. LOCAL DELIVERY CAN BE ARRANGED, PICKUPS ARE WELCOME. FOR ANY QUESTIONS- E-MAIL OR CALL US@ 8476347500. IF YOU FEEL THE ASKING PRICE IS TOO HIGH- MAKE US AN OFFER!
|
|
|
AGFA Accuset 1000 Imagesetter
Shipping: Shipping for this item will be freight or local pickup only. Buyer is responsible for arranging and paying for the truck line. We will charge a $45 packing fee to cover the cost of our materials and labor if shipped via truck line. Please do not confuse this charge for your shipping fees. As stated before. The buyer must be responsible for arranging and paying for shipping. We will provide our contact and pickup information, as well as package dimensions and weight once the item is payed for and packed. Please allow 2-4 business days for packing. Description: Up for sale we have a AGFA Accuset 1000 Imagesetter Functionality: This item powers on. We did not have any media to test it with. So we could not go any further. It seems like its in good shape but we cannot guarantee it. Condition: This item is in good shape cosmetically. ... moreThere are a few minor scratches. Scuffs, and/or markings here and there from normal use. Please see pictures for more details. Items Included: This sale includes: unit and power cord. Guarantee: There are no returns on this item. 07PG05SEVEN BACK, What you see is what you get. Payment is expected within 3 days. Unless other arrangements are made. We accept payments through PayPal only. We accept credit cards through PayPal. We scan the serial numbers of all outgoing items for verification if a return is accepted. If we were not able to test an item. Or it is clearly non-functioning in some way, we may sell it as is. If we decide to do that, it will typically be non refundable. Double check your shipping address before checkout. We do not re-ship items for free. We are not responsible for finding lost packages due to incorrect shipping information. Thank you for viewing the item featured on this page. We are careful to be as accurate with our item descriptions as possible. And we appreciate you taking the time to read what they say. Please be certain you understand the condition of the item, and what is included. Please be certain you are able and willing to pay for the item b
|
|
|
Agfa Avantra 25 ImageSetter + OLP on line processor + Harlequin Rip
This Agfa 25 is Excess from a print shop merger. We can secure to pallets and load on truck. Buyer is responsible for shipping. We can refer a trucking company if needed. Includes online processor and Rip Call Bill Puzzuoli 1-313-598-8455 or e-mail billpuzzuoli@aol.com
|
|
|
Fuji MMI imagesetter display panet
Fuji imagesetter MMI display. serial# 766 part number 75532500 Was a pull from a working machine. Parts available for all imagesetters. CTP, processors and wide format printers. Tech support available. On site service available atlanticcomp.com ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13f1de4530c-0xf4-
|
|
|
Autologic, III 3850 imagesetter mainboard
Autologic. III 3850 imagesetter mainboard. Pulled from a working machine. Many parts available for imagesetters. CTP, Processors and wide format printers. atlanticcomp.com
|
|
|
Ultre imagesetter lasers Quantity of two
Two Ultre imagesetter lasers. Both were pulls out of working machines. Do not know what they were pulled from. output power 3mw atlanticcomp.com Parts for imagesetters. CTP, processors and wide format printers
|
|
|
Agfa Printdrive last version w/ update F service pack-ctp-imagesetter-8 up
Agfa Printdrive Series 3 Version 1 Update F service pack included. Fully loaded. Will work with CTP. Or even imagesetter and is 8 up. Usb dongle and software included. Many prepress parts available. CTP. Imagesetter, wide format parts. Agfa. Screen, fuji, ECRM, Mutoh, Roland, Mimaki, HP, and Epson. We work on ALL double-sided proofers including the Agfa Sherpamatic and Grand Sherpamatic. The Canon Impoproof. HP spinjet, and the new Epson 9700 double preproofer. atlanticcomputerservice.com Tech support available. Posted with
|
|
|
Agfa Avalon 20/25 imagesetter carriage assembly w/ laser
Agfa Avantra 20/25 carriage assembly. Complete unit including shields. Optics. laser and carriage with perfect ball bearings. There is no carriage control board attached. Look for that in our other items for sale. Parts for most imagesetters, CTP, and wide format printers. Tech support available. atlanticcomp.com
|
|
|
Agfa Avalon 20/25 imagesetter transport assembly
Agfa Avantra 20/25 entire transport assdembly. Includes both belts and all rollers. Parts for most imagesetters. CTP, and wide format printers. Tech support available. atlanticcomp.com di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f1de45464-0xf8-
|
|
|
Agfa Selectset imagesetter control panel
Agfa Selectset control panel. Rough shape but all the buttons work. Many parts available for imagesetters. CTP, processors and wide format printers. Technical support available Ink solutions for all wide format printers. atlanticcomp.com
|
|
|
Agfa Avantra 20/25 imagesetter cutter assembly
Agfa Avantra 20/25 imagesetter cutter assembly. Pulled from a working machine. Cuts completely across cut path. Parts for most imagesetters. CTP, and wide format printers. Tech support available. atlanticcomp.com
|
|
|
Agfa Accuset imagesetter cutter motor
Agfa Accuset imagesetter cutter motor. Rotater wheel included. Works like new. Many parts available for imagesetters. CTP, processors, and wide format printers. atlanticcomp.com Posted with
|
|
|
Agfa Accuset imagesetter cutter assembly
Agfa Accuset imagesetter cutter assembly. Pulled and reconditioned. Parts for most imagesetters. CTP, processors and wide format printers. atlanticcomp.com Posted with
|
|
|
Agfa imagesetter processor control panel GLUNZ JENSEN
Agfa imagesetter processor control panel. Wotks with gold box. Brand new faceplate installed Many parts available for imagesetters. CTP and wide format printers atlanticcomp.com Tech support available. Posted with
|
|
|
AGFA SELECTSET 5000 IMAGESETTER COMPLETE PCU CONTROL UNITS
THIS IS A COMPLETE PCU CONTROL UNIT WITH ALL BOARDS AS IT CAME OUT OF A WORKING SELECTSET 5000. THE SELECTSET WAS LIGHTLY USED SINCE MY SELECTSET 7000 WAS DOING MOST OF THE WORK. THE UNIT IS HEAVY AND WILL BE PACKAGED TO THE BEST I WILL BE ABLE TO. FOR OUTSIDE THE USofA SHIPPING. THE BUYER MUST MAKE ARRANGEMENT WITH FORWARDING COMPANY. THE UNIT IS SOLD AS IS WHERE IS WITHOUT WARRANTY OF ANY KIND. SALE IS FINAL, NO RETURN ACCEPTED.
|
|
|
MCON2 board for imagesetter Katana 5055, 5040 Used
Used SRAM board for Katana 5055. 5040 Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide. Shipping Time: 11 to 23 days. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
MCON3 board for imagesetter Katana 5055, 5040 Mk2 Used
Used MCON3 board for Katana 5055. 5040 Mk2 Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide. Shipping Time: 11 to 23 days. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
SRAM board for imagesetter Katana 5055, 5040 Mk2(2x512RAM) Used
Used SRAM board for Katana 5055. 5040 Mk2(2x512RAM) Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide. Shipping Time: 11 to 23 days. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Agfa Accuset 1000 film imagesetter with OLP
This is a fully functional system traded in by a local newspaper. It is currently cleaned and tested and up and running in my shop. Dimensions are 30 X 80 X 40 tall. Please request a freight quote if you are interested. IT will have to go on 2 pallets. Roughly 500 lbs each.
|
|
|
Lynotype Linotronic 330 Imagesetter w/ RipIt RIP - Good Condition!!
Precise Equipment Equipment Liquidators A company you can trust with over 1000 POSITIVE FEEDBACK 1024 E Arlee Place Phone: 714) 991-0427 Anaheim Ca. 92805 Fax: 714) 991-0437 Normal 0 MicrosoftInternetExplorer4 Model: Linotronic 330 Manufacturer: Linotype Year: Estimated to be a 1994 Type: Imagesetter Technology: Capstan. Film size: 12" Max Image Area: 12" Productivity: 13.7 Inch per minute@ 1270. Resolutions: 635 DPI. 847 DPI, 1270 DPI, 1693 DPI, 2032 DPI, 2540 DPI, 3386 DPI. Media Types: Film. Polyester plate, RC Paper. RIP: RipIt Machine Dimensions: 29"x31.5"x37.5" Machine Weight: 396 LBS. Above specs are taken from manufacturer and accurate to the best of my knowledge. Please message/call for additional information Precise Equipment's E-Bay Terms Payments: Buyer must contact us within 48 hours of winning the ... morebid. An Email must be received. Including your name, shipping address and phone number after the close of the auction. o Paypal is our preferred method of payment. Merchandise will be shipped as soon as possible after Paypal confirms payment. If you have any questions about payment methods because of new Ebay rules please give us a call· All Payments must be received within 7 days of auction closing. If payment is not received within that time the item will be relisted and a non-bidders alert will be filed. All California residents will be charged sales tax. Unless a California Resale Certificate is provided. Canada/ Mexico/ and other International Purchases: Buyer is responsible for all customs fees. Warranty: Precise Printing Equipment and Liquidators does a complete review of all equipment prior to remarketing. We always give an honest and fair appraisal of items offered for sale. We sell all items with an accurate representation. Any known defects will be noted and pointed out. Precise Printing Equipment and Liquidators offers no warranty. Expressed or implied. All items are sold as-is. All sales are final. This item along with all other item for sale on E-bay are for
|
|
|
Agfa Accuset 1000 or 1500 imagesetter complete imager assembly
Agfa Accuset imagesetter imager assembly for either a 1000 or 1500. Pulled from working machines. Many parts available for all imagesetters. CTP processors and wide format printers. Ink solutions available for all models of Agfa Sherpas and Grand Sherpamatics Tech support available/ atlanticcomp.com
|
|
|
Imagesetter Laser 3B
There is no brand name on the laser that I can find. It came with parts for Linotronic-Hell imagesetter. It has the same mounts. I know it for an imagesetter but could be another brand. It's German made. Laser Class 3B Sold as is. I have no way of testing it. It may or may not work. You can see most of the numbers if you zoom on the photos.
|
|
|
1997 Agfa Avantra 30 Imagesetter with OLP, Harlequin RIP
1997 Agfa Avantra 30 with On Line Film Processor- Imagesetter. Processor and Harlequin RIP See photos for information on the RIP. PC Operating system with Dongle. Good Working Condition. Dual Supply Spindles: Standard. Electrical Requirements: 100-230V. 400 W, 50/60Hz. Imaging System: Visible red laser diode. Internal Punch: Standard: head& tail. Maximum Image Area: 29.7"x25" Maximum Imaging Speed: 1200 dpi: 625 square inches per minute 1800 dpi: 416 square inches per minute 2400 dpi: 312 square inches per minute 3600 dpi: 208 square inches per minute. Maximum Line Screen: 425 lpi. Media Widths: 14" 16" 18" 20" 24" 26" 28" 30" On Line Processor: Agfa Rapiline 30 on line processor. Output Media: Up to 8 mil HN-sensitive film. Polyester plate or RC paper. Physical: Imagesetter only width: ... more59" height: 49" depth: 28.5" weight: 1230 lbs. Repeatability: +/ 0.2 mil. Resolution: 1200. 1800, 2400 or 3600 dpi. Spot Size: 7.5 microns@ 3600 dpi 10 microns@ 2400 dpi 15 microns@ 1800 dpi 20 microns@ 1200 dpi. This Imagesetter can be picked up for free. This machine has no Warrantee. It has been stored for 1 year from a company that closed its doors. It was used up untill the last day they were in business. Will Consider Real Offers
|
|
|
AGFA Accuset 1500 Imagesetter Imager Assembly w/ Spinner Motor - CG 206779-001
AGFA Accuset 1500 Imagesetter Imager Assembly w/ Spinner Motor- CG 206779-001 Agfa Accuset 1500 Imagesetter Complete Imager Assembly You are bidding on a Agfa Accuset 1500 Imagesetter Complete Imager Assembly. For Either a 1000 or 1500. General Specifications: Manufacturer: Agfa. Part No: CG 206779-001. M 002 Rev. X2G Rotated Lens: 180 Scan Lens S/N: A5248 40 Motor S/N: WW-1964-4.5 Imager S/N: 6748 Diode: 2506 IM: 1.920 Condition: Look like unused. sold like used) This item looks like unused and is in good physical condition. Full operational status of the unit can not be confirmed. We do not have the proper equipment or knowledge to test this unit any further. Comes as pictured. If it is not in the picture. It is not included. Warranty: It is 14 Days Guarantee against DOA. If the item is DOA. Just contact us and we will either exchange or ... morerefund you your full purchase price once the item is returned back to us. Shipping and handling cost are not refundable. Examine the photos closely and buy accordingly. Shipping: Buyer pay actual shipping cost. Please see the pictures for details of the physical condition provided. A Picture's meaning can express ten thousand words. say the Chinese proverb. Condition: Used andale andalesell. Payment Options: Credit Cards Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground I will ship to: United States[Weight] 50 lbs. Shipping and Handling: Customer Service Policy: Free Shipping Offer is for the contiguous 48 states only. AK. HI, territories, and international pay actual shipping. Orders are shipped Monday-Friday We ship via UPS and USPS. Your order will ship 1-3 business days after payment clears SurplusTech Trading SurplusTech Trading appreciates your business. Our products are mostly acquired from Government Auction. State Auction, bankrupt, downsized or defunct companies. Most items are New and Used pulled from their working environment and operation. Items are usually sold in the same condition that we receive them
|
|
|
Screen Dtr-3100/Fujifilm FD-3100 Imagesetter and LD-T1100/FP-1100 OLP w/ rip
I have a 1998 Model Screen Dtr-3100 with LD-T1100 Online processor that I was told was rebadged and sold by fujifilm as the FD-3100 and FP-1100.It also has the Rip. Fixer and developer. I also have some yellow brackets that are also included, I was told they could lock the the imager for transport, not sure though. I Don't know if the machine is fully functional due to my lack of knowledge of the device. I purchased a property and this unit was installed inside. It is fully plummed and wired and can be turned on by the breaker and will run. I just don't want to damage it so I never turn it on. Only reason I labeled the unit as"not working" is because I can not say it is in working order due to my lack of knowledge of the device. I have done research on the item, therefore I am aware that it will need to be removed by a professional ... moreso it will not be damaged in the process.
|
|
|
Agfa Avantra imagesetter bridge controller board
Agfa Avalon bridge controller board. Parts for most imagesetters. CTP, and wide format printers. Tech support available. atlanticcomp.com
|
|
|
Creo Scitex Dolev 450 Imagesetter & Brisque 4 impose rip
Creo Scitex Dolev 450 film Imagesetter& Brisque 4 impose rip. Worked well when removed from service 1 year ago. Buyer is responsible for shipping but we can secure to a pallet and load for a reasonable fee. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-1404814558a-0x107-
|
|
|
AGFA Imagesetter Accuset 800 Plus, Xitron RIP & Graphline Film Developer
Accuset 800 plus Imagesetter. Xitron RIP and Graphline Developer Make your own negatives for letterpress printing plates. Offset printing plates or screen printing screens. Accuset 800 plus imagesetter, Navigator Harlequin RIP- Xitron and Graphline Developer. These were purchased from a reputable. Local printshop and everything powers up. We never got around to using these and we now need the room. There are manuals for the imagesetter and developer. Buyer must arrange pickup. Great pre-press equipment for your printshop and printing press! Because we are not knowledgeable about this equipment. You are buying it as is, where is. Local pick up or buyer can coordinate and arrange own shipping.
|
|
|
Mitsubishi DPX Genesis CTP imagesetter with Rip
Purup Eskofot DPX Genesis Image setter makes Computer- To-Plate as easy as Laser Printing. While maintaining offset quality. This machine has been maintained by a certified Mitsubishi DPX tech and it is in great shape. Its rip has been upgraded 3 years ago with the latest rip software so that it can communicate with the latest software and workflow systems. This software purchase was $2,600. The Rip comes along with the machine. The Genesis is in great shape and all you will have to do is plug it in and get it ready to run. The max size plate width is 13.3 inch. We used this plate maker for our Ryobi 3302 and our Ryobi 3200 presses. We purchased a newer image setter and now have 2 larger ones and no longer need this one. Send me any question you have.
|
|
|
Accuset 1000 Agfa Laser ImageSetter
This Accuset 1000 Agfa Laser ImageSetter is in real good condition and guaranteed to functions 100% It came from a local lab that was upgrading equipment and we can accept pay pal or your credit card. Please contact me with any questions. Comes with cassettes Agfa AccuSet 1000 Imagesetter. 14" wide. Visible red laser(670nm) Resolutions of 600. 1200, 1800, 2400, and 3000dpi. +/ 1 mil repeatability. 20 micron dot@ 1200dpi or greater. 35 microns@ 600dpi. Images 15" per minute@ 1200dpi. Dimensions: 32"W x 39"H x 29"D. Weight: 355lbs
|
|
|
Agfa Imagesetter 1500 Plus
1998 Agfa 1500 Plus imagesetter This unit was running when put into storage. It has been wrapped up and stored inside the shop for a number of years. So I must say it has been un-tested. It does power up properly but I do not have it hooked to a rip station to test. I also have one more 1500 plus as well as an 800 model. If interested you can contact me. These units are up for sale locally and reserve the right to cancel the item at anytime. I can plastic wrap and put on a pallet for an additional $150 but you must arrange pickup from your end. Any and all shipping will be the responsibility of the buyer*
|
|
|
Dolev 800V2 - 8-up Imagesetter - High Speed
Electrical Requirements: 200/220/240 +/ 10% 50/60Hz, 1000 VA. Imaging Speed: 1270 dpi: 1558 square inches per minute 2032 dpi: 882 square inches per minute 2540 dpi: 565 square inches per minute. Imaging System: Laser diode. Internal Punch: Optional(configurable) Maximum Line Screen: 625+ lpi. Media Widths: 10"34" 1" increments) Multiple Supply Cassettes: Small: 12" medium: 20" large: 34" 2 large cassette optional) Output Media: 4 to 8 mil HN-sensitive film. Polyester plate or RC paper. Physical: Width: 65" height: 48" depth: 39" weight: 1210 lbs. Repeatability: +/ 001" Resolution: 1270. 2032, 2540, 3048, 3556, 4064 or 5080 dpi. Spot Size: 10-25 microns.
|
|
|
imagesetter Light Table Pin Bar Punch System
Light Table Image Register System. This light table punch was designed to Punch for Register Film.Paper,Poly and Metal Plates for 1 to 4 Color Work. Clear acetate overlay holds your pre positioned adhesive Registration Marks. All you have to do is to align registration marks to your film or plate and then pull down the handle. This punch is perfect for plate and film sizes up to 14 x 20 inches. Includes all pins.Stops and guides. You can punch lead edge and then lock lead edge and punch trail edge. This will speed up process of alignment for 2 to 4 color work and make registration on press faster than ever. This precession punch system is in like new condition and originally sold for $2,400.00 Specifications Length is 22 inches Width is 16 inches Height at punch handle is 12 inches. Weight is 22 lbs. Price includes ground shipping within ... moreUS. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14397882018-0xff-
|
|
|
Agfa Avantra 25S Imagesetter with OLP
For sale is an Agfa Avantra 25S. With OLP(On line processor) Completely reconditioned, with two input cassettes. The price includes the wooden box crating for shipping or export. The software RIP is not included. We can supply a new Eagle RIP. With interface card and cables for $2,500.00 or a new Harlequin Software RIP with interface box and cables for $3,500.00. We have Avantra parts in stock. Including the spin motors, lasers, boards, cassettes and processor parts.
|
|
|
AGFA 25XT Image Setter and Avantra 2025-OLP Imagesetter
AGFA 25XT Image Setter and Avantra 2025-OLP Imagesetter This was set up to run Poly Plates for Magnum or Didde web presses. But will work for a variety of conventional presses. Details: Manufacturer: AGFA Type: Image Setter Laser Imaging Unit: SelectSet Avantra 25XT Processing& Developing Unit: Avantra 2025-OLP Specifications: Imaging Technology– Internal drum. 180˚ Maximum Format Size– 18 x 25” 457 x 635 mm) Maximum Image Area– 17.7 x 25” 449 x 635 mm) Imaging System– Visible red laser diode(650 nm) Maximum Line Screen– 200 lpi(78 lines/cm) Media Types– Standard Helium-Neon film and paper Resolution: Up To 3600 Dpi RIP: Agfa ApogeeX v1.27.10 Condition: Good. In working condition. This was on a maintenance contract and is in excellent order. Terms& Conditions Payments: Buyer must contact us within 48-Hours of winning an item and provide ... moreus with your company name. Full name, shipping address, and phone number. We accept PayPal. Credit Cards, and Wire Transfers. Item(s) will be shipped once payment in-full has cleared. If you have any questions about payment methods because of new eBay rules please contact us directly. All Payments must be received within 7 days of items closing. If payment is not received within that time the item will be relisted and a non-paying bidders alert will be filed. All California residents will be charged 8% sales tax. Unless a California Resale Certificate is provided. Canada/ Mexico/ and other International Purchases: Buyer is responsible for all customs fees. Warranty: Precise Printing Equipment and Liquidators does a complete review of all equipment prior to remarketing. We always give an honest and fair appraisal of items offered for sale. We sell all items with an accurate representation. Any known defects will be noted and pointed out. Precise Printing Equipment and Liquidators offers no warranty. Expressed or implied. All items are sold as-is, where-is. All sales are final. Unless otherwise noted and expressed in the items description. Shipping: We s
|
|
|
1996 Agfa Avantra 30 Imagesetter with OLP
1996 Agfa Avantra 30 with On Line Film Processor- Imagesetter and Processor Only Good Working Condition Dual Supply Spindles: Standard. Electrical Requirements: 100-230V. 400 W, 50/60Hz. Imaging System: Visible red laser diode. Internal Punch: Standard: head& tail. Maximum Image Area: 29.7"x25" Maximum Imaging Speed: 1200 dpi: 625 square inches per minute 1800 dpi: 416 square inches per minute 2400 dpi: 312 square inches per minute 3600 dpi: 208 square inches per minute. Maximum Line Screen: 425 lpi. Media Widths: 14" 16" 18" 20" 24" 26" 28" 30" On Line Processor: Agfa Rapiline 30 on line processor. Output Media: Up to 8 mil HN-sensitive film. Polyester plate or RC paper. Physical: Imagesetter only width: 59" height: 49" depth: 28.5" weight: 1230 lbs. Repeatability: +/ 0.2 ... moremil. Resolution: 1200. 1800, 2400 or 3600 dpi. Spot Size: 7.5 microns@ 3600 dpi 10 microns@ 2400 dpi 15 microns@ 1800 dpi 20 microns@ 1200 dpi. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1439876dce2-0xf6-
|
|
|
Screen platesetter imagesetter PP66 PC-PIF interface card
Screen PP66 PC-PIF interface card This can take the following devices: Screen FT-R Katana PIF PIF Interface Card. Agfa Avanxis 4(PIF) Fuji FC 5040. 5055(PIF) Screen FT-R Katana 5040. 5055(PIF) Screen DT-R/ MT-R/ PT-R Interface Card. Agfa Acento E. Acento S, Acento IIE, Acento IIS, Acento LF Agfa Avalon N8 10E. Avalon N8 10S, Avalon N8 20E, Avalon N8 20S/Sr, Avalon N8 50E, Avalon N8 50S, Avalon N8 50XT, Avalon N8 70XT Agfa Avanxis 8 Fuji Dart 4300E. 4300S Fuji Javelin 8300E. 8300S, 8600E, 8600S, 8600Z, 8800E, 8800S, 8800Z Fuji Luxel T-6300 Fuji Luxel T-6300CTP. T-6300CTP S, T-9300CTP, T-9300CTP S, T-9500CTP, T-9500CTP S, T-9500CTP HS, T-9800CTP HS, T-9800CTP S, T-9800CTP HS, T-9800CTP E Heidelberg TopSetter 74. P74, 102, P102, PF102 Screen DT-R 1065. 2035, 2065, 3075, 3100, 5120, 6120(Tanto 5120, 6120) Screen MT-R 1100. 1120 Screen PT-R 2000. ... more4000, 4100, 4300, 4300E, 4300S, 8000, 8000II, 8100, 8300E, 8300S, 8600, 8600E, 8600S/Z, 8800, 8800E, 8800S, 8800Z, 8800ZX, 8800II. Payment: I can accept Paypal. Shipping: I will ship by EMS service. Ships to: Worldwide I will not ship the item to the destination that EMS does not delivery. So if you are not in above countries please ask the shipping cost first. If you need to buy other accessories. You can enter our website
|
|
|
Panther Pro46 Imagesetter
I have all the original documentation& RIP software. I'm including the RIP station that was used plus 3 full rolls of unopened film. It includes 2 each of the supply& take-up cassettes. This is not a drum but rather a capstan imagesetter and i t is capable of exposing film up to 18.11 inches for negatives or positives used in Offset. Silkscreen, flexography printing. It is perfect for high resolution color sepations at low cost using its hardware.
|
|
|
EFI RIP for wide format printer, imagesetter proofer
EFI rip contains donge and computer wih software loaded. Is running version 4.0 that was hooked up to an Epson 9900 printer. Parts available for all imagesetters. CTP, wide format printers, and processors. On call service and technical support available internationally. atlanticcomp.com Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs. All items are subject to prior sale. All of our items may be advertised locally and subject to prior sale and this ad being canceled.
|
|
|
ECRM Stingray mako imagesetter EV Jetsetter
ECRM imagesetter equipment running perfect. No problems. This bundle includes imagesetter. 4 film rolls, computer, software, densitometer and film transfer case. Just what you see in picture. The equipment is already packed and shrink wrapped to be shipped when you win this auction.
|
|
|
OYO LIBERATOR 1800 IMAGESETTER/IMAGE SETTER 600dpi for Screen Printing
This is a 1999 Oyo Liberator Gmax 18 inch. I bought it from OYO. Refurbuished, for $9000.00 in 2007. It was originally $22,000. It also has thr RTI rip kit for an XP.It has always been under the premium plus plan with oyo, so all the parts are covered. It has a new roller,and works great. We just don't need one this big. I have the original OYO box, mounted to a pallet, and we will ship it on a trucking freight line, because UPS damaged one of our OYOs once in shipping.Shipping will be what ever it costs.Paypal or a wired cashiers check. located in Memphis,TN.
|
|
|
Agfa Imagesetter Supply Cassette 800 1000 1200 1400 and 1500 series
Agfa Imagesetter Supply Cassette 800 1000 1200 1400 and 1500 series These cassettes are from our shops pre-press department. Our other listings have the imagesetters that were using these cassettes. There are a total of 5 up for sale. If you would like to purchase more than one or the entire lot. Just make an offer. Thank You for looking.
|
|
|
Ecrm Mako Precision Drive For Mako 36/46 Imagesetter Complete
Pulled from a working mako 36. Includes motor. Belts, pulleys and encoder Posted with
|
|
|
Harlequin rip, version 6.0 with dongle, interface card and cable for imagesetter
Harlequin- RTI RIP card(Highwater) Version 6.0 software. Dongle, and cable. No computer included. Will hook up to any Agfa imagesetter. Pulled from a working system. Parts available for all imagesetters. CTP, wide format printers, and processors. On call service and technical support available internationally. atlanticcomp.com Overseas shipping may require'Country of Origin' or other documentation. We are required to pay fees for this documentation and buyer must pay these additional costs prior to shipment. Ask first before purchasing if you are unsure about these additional costs. All items are subject to prior sale. All of our items may be advertised locally and subject to prior sale and this ad being canceled. Posted with
|
|
|
CONT3 Board for imagesetter FT-R 3050 Used
Used CONT3 Board for imagesetter FT-R 3050. Attention: 4 x eproms do not come with this CONT3 Board. Please use 4 x eproms from your own faulty board. Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
CONT4 Board for imagesetter FT-R 3050 Used
Used CONT4 Board for imagesetter FT-R 3050. Attention: 4 x eproms do not come with this CONT3 Board. Please use 4 x eproms from your own faulty board. Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Differential SCSI Kit for imagesetter Katana 5055,5040 & Palladio Used
Used Differential SCSI Kit for imagesetter Katana 5055.5040& Palladio. Comes with 20 metre WD-SCSI cable pn U0985006-00. Differential SCSI Board pn U0985003-00 and Q-logic DIFF PCI card. Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Pulse Motor Driver p/n 64001136 for imagesetter Katana FT-R3050 Used
Used Pulse Motor Driver p/n 64001136 for imagesetter Katana FT-R3050 Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Operation panel for imagesetter Katana 5055 5040 Used
Operation panel for imagesetter Katana 5055 5040 Used Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Spinner motor driver for imagesetter Katana 5055 5040 Used
Spinner motor driver for imagesetter Katana 5055 5040 Used Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Agfa Selectset 7000 Imagesetter
This 7000 is in good shape. We tested this machine and it worked as it should. This sale is for the engine only. No Rip or computer. Buyer is responsible for arranging shipping. We can palletize for an additional charge. Equipment is sold as is with no warranty. Questions? Call Don 813 389 2788 or 813 949 4248 Email don@hancockprintingequip.com Agfa Model Selectset 7000 Maximum Image Area 22" x 25.7" Material Type Up To 8 mil HN-sensitive Film. Polyester Plate Material, RC Paper Material Size 13.3" 16" and 26" wide material Resolution 1200. 2400, and 3600dpi Laser Type Helium Neon laser Interface Technology Internal drum Repeatability +/ 0.2 mil Productivity/Speed Images maximum image area in 1:35 minutes@ 1200dpi RIP Compatibility Taipan. Harlequin, Eagle RIP, Apogee Processor Compatibility online processor Automatic ... moreFeatures Dimensions 60"W x 38"H x 24"D Weight 650lbs. 296 KG
|
|
|
Ecrm Mako 46 Imagesetter Platesetter With Harlequin Rip
Mako 46 film and platesetter with rip mate 8.3 sw rip. Including MAC computer. Excellent working order. Looks like new This ship as freight you must confirm s shipping cost before bidding or paying. Posted with
|
|
|
AGFA Viper 1.5 and 1.9 software RIP bundle + dongle for AGFA imagesetter
This auction is for AGFA Viper software RIP package. Included are: AGFA VIPER v. 1.5.1 installation CD AGFA VIPER v. 1.9 installation CD- backup copy(lost original one) AGFA PostScript Enviroment v.10.4.1 installation CD AGFA PS Companion v. 1.0 installation CD a compatible dongle original AGFA box I had this software installed on Mac for a couple of years and it worked as intended. It's a software RIP package for AGFA imagesetters(and possibly CTPs too) You will also need a PCI APIS card or interface box to connect the MAC to the imaging device(please contact me regarding availability of the interface box) Good luck! 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1440b018796-0xf5-
|
|
|
Power Supply for Agfa Imagesetter AVANTRA or ACCUSET
Agfa Accuset power supply. Removed from a working Accuset 1000. PSU also compatible with Avantra image setters Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1440b018762-0x105-
|
|
|
Xitron Highwater Interface RIP Board 024-2231-003 Rev. C for CTP or Imagesetter
Description Selling a Xitron Highwater Interface RIP Board 024-2231-003 Rev. C for CTP or Imagesetter. This board is in good working condition and ready for installation in to your system. Listing is for Xitron Highwater Interface RIP Board 024-2231-003 Rev. C for CTP or Imagesetter only. Xitron Highwater Interface RIP Board 024-2231-003 Rev. C for CTP or Imagesetter Listing is for Xitron Highwater Interface RIP Board 024-2231-003 Rev. C for CTP or Imagesetter only Xitron board is in good working condition and ready for installation in to your system Payment We accept paypal only. Florida residents pay 6.50% sales tax. Shipping No PO Box or APO address. No International Shipping, Item ships within 3 business days from when your payment clears. You'll receive tracking number. All items ship ground. Express shipping is available. Please ... moreemail us your shipping address for a quote before bidding. Item WILL NOT ship to any address other than the address provided by PayPal. Please make sure your address is correct and current. Terms and Conditions If you are not satisfied with your purchase for any reason. Please contact us BEFORE leaving feedback or starting dispute and we will be more than happy to immediately assist you. Our customers are our#1 priority, and we make every effort to ensure your shopping experience is a great one. Return Policy: Please contact us for returns. We try to be fair and accurate with all our auctions and descriptions. Buyer has 14 days from date of receiving item to return it. Please read each auction and bid carefully. We do not offer refunds on any item unless is grossly misrepresented. Buyer must pay for return shipping. Refund will be received as money back through paypal only and completed after we receive the item.
|
|
|
Door Supports And Shocks For Avantra 25 Imagesetter
In good working order Posted with
|
|