|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$12.45 Shipping Condition: Used Location: Alviso, United States These are rated for 40W output at 808nm. These are in excellent physical condition. They are temperature tunable to 808nm with narrow spectral width and ... moreproduce 40W rated output at less than 40A, which is the spec for new diodes.
Buy It Now
$5.45 Shipping Condition: New Location: Bohemia, United States Standard fiber coupling (HP-SMA) for 400μm NA 0.22. Center Wavelength - 808 nm. Center Wavelength Tolerance ±3 nm. Spectral Width (FWHM) - 4 nm. Wavelength ... moreTemp. Coefficient - ~.0.27 nm/°C. Power Conversion Efficiency - >40%.
Buy It Now
Free Shipping Condition: New Location: China It emits no heat, sounds or vibration. 【Laser wavelength】 650nm±20nm 808nm±20nm. 150mW±20%(808nm). 【Single laser output 】 5mW±20%(650nm). Blue LED light ... morewith a wavelength of 410nm-480nm has the effect of quickly inhibiting inflammation.
Buy It Now
$12.45 Shipping Condition: Used Location: Alviso, United States These have a built-in photodiode for power monitoring and 10K NTC thermistor for temperature. Our six-pin, fiber-coupled, single-stripe devices are equipped ... morewith an integrated photodiode and thermistor assembly that monitors both the light output and the case temperature of the diode laser.
Buy It Now
$3.00 Shipping Condition: New Location: China This is a power driver Circuit Board commonly used for 532nm 650nm 780nm 808nm 980nmnm Green Red IR Laser Diode! Output Current: 0-800mha constant current ... more(Adjustable).
Buy It Now
$10.00 Shipping Condition: New Location: Princeton, United States This is an 808nm 100um Aperture 3W laser diode. The AR Coating of the laser diode is less than 0.4%. It was p-down bonded on C-Mount, which was made in ... morethe USA. 808nm 100um Aperture C-Mount Laser Diode with Super Low AR.
Buy It Now
Free Shipping Condition: New Location: China Wavelength 808nm. Laser Shape: Rectangular or suare dot: 808nm IR laser shape is a square shape, but it can be focused to a dot. 1x 808nm IR Infrared ... moreLaser (Battery not included for easy custom clearance).
Buy It Now
Free Shipping Condition: New Location: China 1pc NEW 808nm 810nm 1W 9.0mm Infrared IR Laser Diode TO-5 LD NO PD. Wavelength: 808nm (without glass window)Working temperature: -10 ℃ ~ 40 ℃. Output ... morepower: 1W 1000mW. Be sure the operator has experience in optics DIY or testing.
Buy It Now
Free Shipping Condition: New Location: China Output Power(mw):2000/ 2W.
Buy It Now
$5.00 Shipping Condition: New Location: East Brunswick, United States Click to Enlarge Click to Enlarge Tracking number for all orders. Wavelength: 808nm. Package Type: TO-18(Φ5.6mm) ■ Absolute Maximum Ratings(Tc=25℃) Parameter. ... moreSymbols. Ratings. Units. Optical Output. Po(CW) 500. MW. Reverse Voltage. Vr. 2. V. Operating Temperature. Top. 10 ~ +40. ℃. Storage Temperature. Tstg. 40 ~ +80. ℃. ■ Electrical and optical Characteristics(Tc=25℃) Parameter. Symbols. Conditions. Min. Typ. Max. Units. Threshold Current. Ith. 50. 70. MA. Operating Current. Iop. Po=400mW. 500. 550. MA. Operating Voltage. Vop. Po=400mW. 1.8. 2.1. Volts. Slope. Efficiency. Η. 0.8. 1.0. MW/mA. Beam Divergence. FWHM) Parallel. Θ‖ Po=400mW. 9. 12. 15. Deg. Perpendicular. Θ⊥. Po=400mW. 28. 30. 35. Deg. Parallel Deviation Angle. △θ‖ Po=400mW. 3. 3. Deg. Perpendicular Deviation Angle. △θ⊥. Po=400mW. 3. 3. Deg. Emission Point Accuracy. △X.△Y,△Z. Po=400mW. 80. 80. Um. Lasing Wavelength. Λp. Po=400mW. 805. 808. 811. Nm. Im is sorting by custom’s need. ◎θ‖ and θ⊥ are defined as the angle within which the intensity is 50% of the peak value. package: one pc. Tracking number for all orders. pa. Inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
Free Shipping Condition: New Location: China Center wavelength: 785nm 808nm 830nm 850nm 940nm 980nm. Material: high quality special glass.
Buy It Now
Free Shipping Condition: New Location: China 808nm 500mW IR 5.6mm Laser Diode For Producing Green Module. 2x 808nm 500mW Infrared 5.6mm Laser Diode. This 808nm laser diode is especially used for ... moreproducing green lasers after passing through crystals.
Buy It Now
Free Shipping Condition: New – Open box Location: Alviso, United States (Test report included with each module. This diode must be mounted and used with an external TEC). Manufacturer: JDSU / SDL. Photodiode Sensitivity: 0.1 ... more- 10.0 uA/mW. Model Number: 2351. The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information.
Buy It Now
$75.00 Shipping Condition: New Location: China 808nm 100mW Infrared IR Laser Module+TTL/Analog+TEC Cooling+85~265V. 1pc 808nm 100mW IR Laser Module + TTL/Analog + TEC Cooling. Modulation:0~30khz Analog ... moreor TTL(optional). Output Power:100mW. Laser show.
Buy It Now
$4.00 Shipping Condition: New Location: China Wavelength: 808nm. 1pc 808nm Infrared IR Laser Diode Module 12V. Focusable: YES. This is a focusable laser module. Red wire connects”+” pole; Black wire ... moreconnects ”-” pole. TTL 3-5V on, 0V off. TTL: >20KHz.
Buy It Now
Free Shipping Condition: New Location: China (8)Reduces inflammation and swelling. Pulse Handheld The Laser Therapy The use of three different low-intensity light wavelengths (650 nm, 808 nm) to ... morerelieve pain and inflammation associated with many acute and chronic pain disorders.
Buy It Now
$1.50 Shipping Condition: New Location: China
Buy It Now
$3.00 Shipping Condition: New Location: China Wavelength:808nm 810nm. 1pc 808nm laser diode module. Output Power:30mW/50mW/100mw/200mW(optional). Be sure the operator has experience in optics DIY ... moreor testing. Laser Shape:Dot(rectangular to oval)/Line(120 degrees as default).
Buy It Now
Free Shipping Condition: New Location: China Output Power 3000mw. warranty: no warranty because laser diode is consuming material. We are committed to resolve all issues in a friendly and satisfactory ... moremanner. Working Temperature -10 ~40 centi-degree.
Buy It Now
Free Shipping Condition: New Location: China Notice: 808nm IR lasers can be seen a little red light by bare eyes; 980nm IR lasers can't be seen the light by bare eyes. Power: 500mW / 100mW. 1x Dot ... morelaser diode module 1x 5V Adapter. Laser shape: Dot (Rectangular to Oval).
Buy It Now
Free Shipping Condition: New Location: China Wavelength: 808nm. Working Mode: CW(TTL 10~20KHz). 5, Good cooling, with TTL. 7, The output beam is IR. human eye can only see the weak red color. Module ... moreSize: 33mmx33mmx80mm. But you can buy high quality products and satisfied products.
2d 17h 47m 53s 0 bids
$2.99 Now
Free Shipping Condition: New Location: China Wavelength: 808 nm (without glass window). Working temperature -10 ℃ ~ + 40 ℃. Output power: 300mW.
Buy It Now
Free Shipping Condition: New Location: China This is a power driver Circuit Board commonly used for 532nm 650nm 780nm 808nm 980nmnm Green Red IR Laser Diode! 4x Laser Diode Module Driver Board.
Buy It Now
$18.40 Shipping Condition: Used Location: Alviso, United States This assembly was removed from a low power Spectra Physics FCBar pump diode. We have several of these so the pictures are representative and the serial ... morenumber may not match the unit you receive. 5m long fiber cable assembly with 19 200um fibers arranged in a linear array at one end and a bundle at the other.
Buy It Now
Free Shipping Condition: New Location: China 5x 808nm 500mW IR 5.6mm Laser Diode For IR Green Light. 5x 808nm 500mW IR 5.6mm Laser Diode. This diode can DIY an infrared or green module. If it is ... moregreen, it needs crystal coupling (For Professional).
Buy It Now
Free Shipping Condition: New Location: China 5pcs 810nm 808nm 1W Infrared 9.0mm TO-5 1000mW Laser diode without Glass Window. 5x 808nm 1W 9.0mm Laser Diode. Threshold Current: 250mA~300mA.
Buy It Now
Free Shipping Condition: New Location: China PICTURES OF PRODUCTS: Description OF PRODUCTS: All items are 100% new& never used. Features: 1. Constant current Stable voltage IC circuit. Laser ... morediode can be better protected without being damaged 2.Constant current output. Can be adjusted（ 0~580mA） 3.DC supply voltage input 3.0~4.2V. 4.Suitable for 808nm 100mw~500mW laser diode. 5. Standard size. Very suitable for Hand-held laser pointer, laser pen. 5. Power Supply: Li battery such as 16430.18650,14500 and 18500. 6.Size:10.8mmx18mm(WxL) Stability is very good! This driver have been rigorously tested. And now we also have been using it. This driver is not a simple circuit. Not is just raise the voltage or reduce voltage. Constant output current.Avoid high current instant damage the diode. PAYMENTP: We only accept Paypal. SHIPPING: All item is shipping within 24hours except holiday and weekend after payment had been finished. Shipping method: One:Shipping freest economy. There is no tracking number. Two:Transmission standard.Also known as the register airmail transmission can be tracked. 1. We will send to the paypal address; 2. We will not responsible for it be returned by wrong address; 3. If you need revise ship address please send us a note before or at the moment when you make payment.We are not responsible for any wrong or undeliverable address; 7-12 working days by ePacket to USA; 7-15 working days by royal airmail to UK; 10-20 working days by royal airmail to Canada; 15-22 working days by royal airmail to most countries in Europe; Country Shipping Time Working Days + Saturday + Sunday. 5-10. 11-15. 16-20. 21-25. 26-30. 35. United States. Rate(item arrived) 5.20% 65.00% 19.70% 5.40% 4.70% Refund. United Kinddom. Rate(item arrived) 9.90% 63.20% 19.10% 3.40% 4.40% Refund. Canada. Rate(item arrived) 2.00% 45.10% 31.40% 17.60% 3.90% Refund. Australia. Rate(item arrived) 21.40% 52.10% 16.30% 5.20% 4.00% Refund. Germany. Rate(item arrived) 11.10% 22.20% 30.30% 20.90% 15.50% Refund. Brazil. Rate(item arrived) 0.50% 1
Buy It Now
$24.74 Shipping Condition: Used Location: Alviso, United States High-power, fiber-coupled laser diode module with integrated TEC cooling. These are used as pump diodes in Coherent Verdi, Vitesse and other laser systems. ... moreThe manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information.
Buy It Now
$27.00 Shipping Condition: New Location: China Focusable 808nm 400mw/800mw/1600mw/2400mw/3200mw Infrared Laser Dot Diode Module with TTL Driver. Wavelength 808nm. LD 808nm 0.5W, 1W, 2W, 3W, 4W. 1x ... moreFocusable 808nm Infrared Laser Diode Module. Red wire connects”+” pole; Black wire connects ”-” pole.
Buy It Now
Free Shipping Condition: New Location: China Working current:10-18A.
Buy It Now
$5.77 Shipping Condition: New Location: China Wavelength 808nm. LD 808nm 2W 2000mw. This is a focusable laser module. You can turn it to adjust the power of the laser. Turn Clockwise to increase the ... morelaser power. Otherwise to decease the power.
Buy It Now
Free Shipping Condition: New Location: China (LASTEK Handheld LLLT Laser Therapy Device GD-P For Arthritis Wounds Pain Relief. LASTEK Handheld LLLT Laser Therapy. Device GD-P For Arthritis Wounds ... morePain. 8)Reduces inflammation and swelling. 2)Sports injuries, wounds, and fresh scars.
Buy It Now
Free Shipping Condition: New Location: China Features: 1) High power output. Can adjust the focus. 2) Wood carving can light matches. Pop balloons, black plastic(3) Coated glass lens. Constant current ... moreand voltage, high quality. 4) Good cooling(5) High quality coated glass lens. The output light beam is very small. Diameter within 200mm) Most powerful energy within 200mm. The output beam is IR. human eye can't see the beam. Specifications: Wavelength: 808nm Power output: 1W Working Current: Working Temperature: +10dgC-+60dgC Storage Temperature: +10dgC-+50dgC Lifepan： 5000hours Module Size: 30mmx30mmx90mm About us We manufacture laser from 2007. All products are developed and manufactured by ourselves. High quality is our goal. Our store don’t sell inferior products. We We also have our own factory and laser laboratories. CNC equipments. Contact us: see paypal Address Warranty Electronic. Optical parts are fragile but for all items we would offer 6 month quality warranty. In this period we would exchange for any defective parts. Buyer and seller bear their shipping fee separately. please be sure not to dismantle the item unauthorized. Payment accept Paypal only. Shipping We Ship to Worldwide. A tracking number by Singapore Post or Hong Kong Post will be provided. if your order total is over 20 USD. Mail status can be tracked at the official website of your national post office. Delivery time depends on destination and other factors. It may takes up to 30 business days. o 10-22 days to USA/ Canada( USA usually less than 12 days) o 15-25 days to United Kingdom o 15-30 days to most countries in Europe Dear buyer. If you have not received the items or have any questions, please contact us. we will try our best to satisfy you. You're happy. I'm happy! Feedback Hope you can give us more suggestions. We will try our best to satisfy you, we will give good feedback to every buyer who pays, Also hope you will give us positive feedback. Happy shopping!
Buy It Now
$4.00 Shipping Condition: New Location: China 1pc 808nm 500mw/ 850nm 1w laser module. The laser interface has three pins. If you don't connect the signal directly to 12V+and GND, you can emit light! ... moreThere is no need to connect the signal again.
Buy It Now
$4.00 Shipping Condition: New Location: China Focusable 200mw/300mw 808nm Infra-Red IR Laser Diode Dot Module w/ 12V 1A Adapter. Wavelength: 808nm. 1 x Focusable 808nm 200mw/300mw Infrared IR Laser ... moreDot Diode Module 12V+ TTL+ Fan Cooling. Modulation frequency: Adujstable TTL modulation.
Buy It Now
Free Shipping Condition: New Location: China For 405nm 450nm 505nm 515nm 532nm 638nm 650nm 780nm 808nm 980nm,ect. 5x 200nm-1100nm Lens. 5pcs 200nm-1100nm Focusable Lens DIY Blue Red Green IR Laser ... moreModule. Be sure the operator has experience in optics DIY or testing.
Buy It Now
$10.00 Shipping Condition: New Location: Princeton, United States Normal 0 false false false EN-US ZH-CN X-NONE Normal 0 false false false EN-US ZH-CN X-NONE Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal ... more0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 Normal 0 808 nm 1W 50μm Aperture TO-5 Laser Diode with FAC lens Description: This is an 808nm laser diode which can output 1W optical power from its 50μm aperture. The fast axis of the laser diode is collimated by a FAC lens. The laser was p-down bonded on TO-5(9mm TO can) Which was made in the USA. It came to us with a lot of other electronic/opto-electronic related surplus. We have 130 such lasers in stock. The lasers are brand new not used. Specifications: Characteristics Specification 808nm 1W TO-5 Laser Diode with FAC lens CW output power(W) 1.0. Peak wavelength(nm) 808 ± 3 Spectral width(nm) ≤ 4.0. Threshold current(A) ≤ 0.25. Operating current(A) ≤ 1.20. Slope efficiency(W/A) ≥ 1.0. Beam divergence θ ∥ × θ ⊥(deg. 8/1.5 Wavelength temperature coefficient(nm/ ℃) 0.3. Emitting area(μm) 50 × 1 Lifetime(hour) 10.000. Package. TO-5(9mm TO can) No Photodiode. Data Sheet. Available for each diode. By Bidding. You must agree and accept: You are over 18 years old and understand the dangers and risks of laser use. And will use this component responsibly. You will use this component in a legal. Safe manner to ensure audience and personnel safety. You have a working knowledge of laser diodes. You understand ESD. And the static sensitivity of this component. Laser beam is harmful for eyes during process. Please avoid any directly see on the aperture. Never shine laser beam on human or animals. You accept these diodes as electronic components for integrating them into a system designed by yourself. You relieve the SELLER. And E-bay from any and all LIABILITY from damage or injury that may arise from use of this laser. If you are not serious. Please do not place a bid. Return policy:
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$7.55 Shipping Condition: New Location: Revere, United States This filter has an ultra-narrow linewidth with 78% reflectance efficiency at 808nm. This filter can be used as an ultra-narrow bandwidth clean-up filter ... morefor 808 nm diode lasers. It can also be used to select a narrow bandwidth from Ultrafast Ti:SA lasers at 808nm.
Buy It Now
Free Shipping Condition: New Location: China 1 x 808nm 2400mw Laser Diode Module. Wavelength 808nm. LD 808nm 3W. Red wire connects”+” pole; Black wire connects ”-” pole. TTL 3-5V on, 0V off. TTL ... more>20KHz. Laser Shape:dot(The spot can be adjusted from rectangle to oval).
Buy It Now
$5.77 Shipping Condition: New Location: 江夏区, China 808nm 500mW 5.6mm TO-18 Infrared IR Laser Diode LD for Producing Green Lasers with PD. Output Power: 500mw Wavelength: 808nm. 1pc 808nm 500mW 5.6mm TO-18 ... moreInfrared IR Laser Diode LD for Producing Green Lasers with PD.
Buy It Now
Free Shipping Condition: New Location: China Wavelength ： 808nm. 808nm laser is 99% IR cannot be seen by human bare eyes. Focusable ： Yes. Laser Shape：Rectangle DOT ( NOT round dot) /Line. Divergence ... more： 120 degree li ne. Working Temperature ： -10~50 centi-degree.
Buy It Now
Free Shipping Condition: New Location: China 808nm 200mW IR 5.6mm TO-18 Laser Diode. 5x 808nm 200mw 5.6mm Laser Diode. Output power: 200mW.
Buy It Now
$3.00 Shipping Condition: New Location: 江夏区, China This is a power driver Circuit Board commonly used for 808nm 980nmnm Laser Diode! 2x Laser Diode Module Driver Board. If don't use TTL, it needs to short ... morecircuit 5V " " and TTL " ", that is continuous working.
Buy It Now
Free Shipping Condition: New Location: China 808nm TO-5 9mm laser diode mounts& Housing& laser holder(copper material) All are NEW! PICTURES OF PRODUCTS: Description OF PRODUCTS: 1.Suitable ... morefor 808nm laser diode. Sealed Size: TO-5 9mm laser diode; 2. Material: Copper. 3.Size: 12mmX35mm（ Outer diameter x length） 4.Quantity: 1 set Pictures for showing item at diffeent angle views. Warm tips： We use high-cost high-quality accessories. We will not sell the poor quality or unstable products. not deceive buyers. Dear buyers. If you want to buy high-quality lasers, please choose us. Although the price of our laser is higher than other sellers. But you can buy high quality products and satisfied products. PAYMENTP: We only accept Paypal. SHIPPING: All item is shipping within 24hours except holiday and weekend after payment had been finished. USA epacket Delivery; All of other countries HongKong post airmail with tracking NO. or Singapore post airmail with Tracking No. 1. We will send to the paypal address; 2. We will not responsible for it be returned by wrong address; 3. If you need revise ship address please send us a note before or at the moment when you make payment.We are not responsible for any wrong or undeliverable address; 7-12 working days by ePacket to USA; 7-15 working days by royal airmail to UK; 10-20 working days by royal airmail to Canada; 15-22 working days by royal airmail to most countries in Europe; Country Shipping Time Working Days + Saturday + Sunday. 5-10. 11-15. 16-20. 21-25. 26-30. 35. United States. Rate(item arrived) 5.20% 65.00% 19.70% 5.40% 4.70% Refund. United Kinddom. Rate(item arrived) 9.90% 63.20% 19.10% 3.40% 4.40% Refund. Canada. Rate(item arrived) 2.00% 45.10% 31.40% 17.60% 3.90% Refund. Australia. Rate(item arrived) 21.40% 52.10% 16.30% 5.20% 4.00% Refund. Germany. Rate(item arrived) 11.10% 22.20% 30.30% 20.90% 15.50% Refund. Brazil. Rate(item arrived) 0.50% 13.10% 43.30% 28.10% 15.00% Refund( 45) Russia. Rate(item arrived) 0.50% 13.10% 43.30% 28.10% 15.00% Refund( 45
Buy It Now
Free Shipping Condition: New Location: China Output Power 5000mw. We are committed to resolve all issues in a friendly and satisfactory manner. Working Temperature -10 ~40 centi-degree. We will help ... moreyou as soon as possible. Besram Service. We will response to any of your inquiries within 24 hours.
Buy It Now
Free Shipping Condition: Used Location: Santa Clara, United States
Buy It Now
$4.00 Shipping Condition: New Location: China 10pc Plastics Laser Collimator Lens. Lens Material: Plastics. Lens Size: 7mm. We will send the item to you as soon as you won and paid. Be sure the operator ... morehas experience in optics DIY or testing.
Buy It Now
Free Shipping Condition: New Location: China 808nm 100mw IR Dot Laser Diode Module. 1x 808nm 100mW Dot Laser Module. Output Power: 100mW. Laser Shape: Dot (Rectangular to Oval). Working Current:
Buy It Now
Free Shipping Condition: New Location: 江夏区, China 1pc 2w 808nm Infrared IR Laser Diode C-Mount LD for Green Laser Pump. For green laser pump.This Infrared laser diode is an industrial electronic component. ... moreand protect your eyes before laser ray. Be sure the operator has experience in optics DIY or testing.
Buy It Now
Free Shipping Condition: New Location: China PICTURES OF PRODUCTS: Description OF PRODUCTS: 1.Suitable for 808nm laser diode. 2. Sealed Size: TO-5 9mm laser diode; 3. Material: Copper. 4.Size: 12mmX35mm（ ... moreOuter diameter x length） 5.Quantity: 1 set 6. Including glass focusing lens and expanding glass. Easily adjust the focus. 7.Diameter of focusing lens:5mm; 8.Diameter of expanding lens:5mm; 9, Focal length:14mm; 10. Laser diode install method:Press-In; Warm tips： We use high-cost high-quality accessories. We will not sell the poor quality or unstable products. not deceive buyers. Dear buyers. If you want to buy high-quality lasers, please choose us. Although the price of our laser is higher than other sellers. But you can buy high quality products and satisfied products. About Our Welcome.Friends, We are Professional in stage lighting products line near 10 years. We are selling and wholesale all kinds of stage lighting products(Laser Stage Light. Laser Lighting,DJ Light, Disco Light,LED lighting,Par lighting,Mini Laser,laser pen,laser pointer ect. and all parts of it! We are no bad supplier.Any question or doubt and problem,please don't leave Negative feedback and Neutral feedback to our before Communication with our. Here we keep our words that Sure 100% Satisfactory solution asap after you contact with our. Many thanks for your professional understanding and supports! We hope that do our best to offer better service to all of our customers in Future. Happy shopping! Dearest friends. PAYMENTP: We only accept Paypal. SHIPPING: All item is shipping within 24hours except holiday and weekend after payment had been finished. USA epacket Delivery; All of other countries China post airmail with Tracking No. 1. We will send to the paypal address; 2. We will not responsible for it be returned by wrong address; 3. If you need revise ship address please send us a note before or at the moment when you make payment.We are not responsible for any wrong or undeliverable address; 7-12 working days by ePacket to USA; 7-15 working days by royal airmail to UK; 10-2
Buy It Now
Free Shipping Condition: New Location: China 1pc 808nm 500mW Dot IR Laser Module. 808nm is IR lasers which can only seen a weak red light. It's normal. Focusable: YES. Output power:
Buy It Now
$18.40 Shipping Condition: Used Location: Alviso, United States This assembly was removed from a low power Spectra Physics FCBar pump diode. We have several of these so the pictures are representative and the serial ... morenumber may not match the unit you receive. 5m long fiber cable assembly with 19 200um fibers arranged in a linear array at one end and a bundle at the other.
Buy It Now
$8.00 Shipping Condition: Used Location: Sunnyvale, United States JDSU SDL 2351 Laser Diode Module w/ Photodiode Feedback, TEC, 0.5W, 808nm, TO-3
Buy It Now
Free Shipping Condition: New Location: China 808nm 500mW 5.6mm Infrared IR Laser Diode Specially for Producing Green Lasers. 1pc 5.6mm 500mW 808nm Infrared IR Laser Diode NO PD. This 808nm laser ... morediode is especially used for producing green lasers after passing through crystals.
Buy It Now
$4.00 Shipping Condition: New Location: China 808nm 500mW IR Focusable Dot Laser Module w/ Driver TTL + 12V Adapter. Wavelength: 808nm. 1x 808nm 500MW Dot Laser Module. Output power: 500mW. Laser ... moreshape:Dot (rectangular to oval). 1x 12V Adapter. Laser head size: 33x33x50mm.
Buy It Now
$15.00 Shipping Condition: New Location: Israel Can be installed in standard mounts. Several sets available.
Buy It Now
Free Shipping Condition: New Location: China Focusable: Yes. Output Power:25mW/50mW/100mW/200mw. Laser Shape: Dot. Module Size:12x45mm.
Buy It Now
$27.00 Shipping Condition: New Location: 江夏区, China Focusable 808nm 400mw/800mw/1600mw/2400mw/3200mw Infrared Laser Dot Diode Module with TTL Driver. Wavelength 808nm. LD 808nm 0.5W, 1W, 2W, 3W, 4W. 1x ... moreFocusable 808nm Infrared Laser Diode Module. Red wire connects”+” pole; Black wire connects ”-” pole.
Buy It Now
$4.00 Shipping Condition: New Location: China 808nm IR InfraRed 800mw Laser Dot Module w 1W LD Diode 12V TTL. 1pc Powerful 808nm 800mw Infrared IR Laser Diode Module. Wavelength 808nm. LD 808nm 1W. ... more(Suitable item No:282325409235). Red wire connects”+” pole; Black wire connects ”-” pole.
|
|
|
|
Fiber-Couple laser Jenoptik diode laser 808nm 20watt cw 20w diode laser
Diode Lasers. Design: 215415624, 20 W cw, 880 nm, fiber-coupled 0.4 mm, NA 0.22. Pumping of solid-state lasers: high power( 1kW)Low power( Diode direct: non-metal, Medicine/ophthalmology: laser surgery and others, High optical output power, Cooling: passively cooled with integrated TEC, Operation mode: cw. Power modulation only between threshold and maximum current, Lifetime: 20.000 h(constant current) under qualification, Power monitor: Infineon. SFH 229, Temperature sensor: PT 100 and PT 1000, Quantity of submounts: 1, if you can not see the pdf.Ask me JOLD-X-CPXF-1l laser diode Jenoptik JOLD-20-CPXF-1L fiber-coupled diode laser 808nm。20cw. I have sold 32 psc yet. working. On Jun-30-11 at 07:09:16 PDT. Seller added the following information:
|
|
|
Dilas 808nm Laser Diode 40W-50W DPSS Conduction-Cooled Single bar / Avail QTY
Payment Policy Dilas 808nm Laser Diode 40W-50W DPSS Conduction-Cooled Single bar/ Avail QTY Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Dilas 808nm Laser Diode 40W-50W DPSS Conduction-Cooled Single bar/ Avail QTY Used Condition Dilas Laser Diode Conduction-Cooled Single Bar DPSS Array Wavelength: 808nm Output Power: 40W-50W http:www.dilas.com/gdresources/downloads/products/DILAS_SB_808nm.pdf INV# 8J90538-05-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. ... morePayment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is UPS for all domestic and international
|
|
|
(LOT / 2) Coherent 20,000 mw 808nm Fiber Array Diode Package FAP Laser DPSS Pump
NOTE: IMAGES ARE*TYPICAL* OF UNITS BEING SHIPPED AND ARE NOT NECESSARILY THE UNIT SOLD READ LISTING CAREFULLY NOTE: THIS LISTING IS FOR A LOT OF TWO(2) ITEMS. These are used and untested(but known to have been removed from working systems) coherent FAP IR laser arrays. Inside of each is a diode array bar connected to optical fibers that join at a singular fiber optic terminal for direct output or coupling to a fiber optic cable to deliver laser light to the intended device. These are labeled anywhere from 15 w(15.000 mw) to 45 w(45,000 mw) and have various minor visible problems such as slightly bent or even broken electrical terminals, heat sink base and case scratches and small dents, broken or bent external fiber optic ports, and other apparent damage that(of itself) won't affect the ability of the diode bar to lase. Still, because ... morethese are neither tested nor opened to inspect the diode bar, they are being sold at deep discount as parts or repair only. No returns will be accepted on these items. All lasers came and will be shipped with an ESD terminal short(if possible) and in ESD protective materials.
|
|
|
Lot of 8 Dead Laser Diodes 445nm 405nm 808nm red violet blue - scrap recovery ?
This auction is for the following: This is a LOT sold together(1) 250mw red diode. Let it sit around and as soon as i decided to connect it, it winked out. could not return(3) 445nm 1w from the original projector- dead(i have heard you can replace a few in a projector with these and the projector will keep running. No idea if its true) 1) 405nm working. Unknown MW(I think 50mw but unsure, the diode with the green and red wire) 2) really messed up c mount diodes(scrap i dont know what these could be for otherwise) 1) 1w 808nm diode unknown condition. Could have seen better days but I think it works Scrap recovery? could be gold? not sure I ship by USPS or UPS Ground. The choice is yours on checkout. There are advantages and disadvantages to both. USPS: Does NOT guarantee arrival time unless you use express mail. Their tracking is not really ... moretracking but rather usually only shows when the item has been delivered. It does not show when an item has been picked up. I usually ship the very next day with USPS since they do at home pickup everyday free of charge-USPS Priority mail is usually cheaper and quicker to get small items across the country-They offer free boxes for priority mail so I do not charge an extra fee for packaging UPS: Offers up to date tracking-I usually ship this within the following 2 days of payment. I can not drive to the UPS store every day to drop off packages-Free insurance up to $100-Shipping from east coast to west coast via UPS ground takes 6 business days from the date of drop off Upon receipt. Please leave positive feedback with 5 stars. 5 stars is important to eBay sellers. If you feel this transaction was not 5 star worthy please e-mail me and let me know what I can do to better the transaction. I do respond extremely quickly. Ebay has buyers rate sellers on 4 categories. I will outline them below and explain how they should be rated. I will leave feedback as soon as I receive it Item as described: Is the item described in my written description above accura
|
|
|
High Power 5 Watt 808nm Laser Diode Chip Emitters Box of Over 20 of Them!
This is a lot of over 20. 5 watt laser diode die chips. These are unused parts from a project that was canceled. They were intended to be used for a small but very powerful dpss Q-switched laser. These are delicate parts that need extreme care to solder right. Also included is a box with several 860nm 1w laser emitters to use to practice soldering these tiny things with. I have lots of laser and other unique stuff for sale this week.
|
|
|
Large High Power Industrial Laser Diode Welder Cutter Cylindrical Lens 808nm 3KW
This is a very large cylindrical lens used for industrial laser diode welding and heat treatment machines up to 3KW optical power at 808nm+. 15nm. It is part of an optical system that will correct the beam from the arrays to make it able to be focused to about 10mm on the workpiece. The lens will work with other wavelengths up to 980nm and as short as visible ranges, with some attenuation in the green region. The lens measures 150mm FL and is approximately 60mm long by 50mm tall. This lens appears unused. This item is very hard to find. I have lots of laser and other unique stuff for sale this week.
|
|
|
2-3 Watt 808nm High Power Laser Diode Chip Emitters Box of Over 10 of them
This is a lot of over 10. 5 watt laser diode die chips. These are unused parts from a project that was canceled. They were intended to be used for a small but very powerful DPSS Q-switched laser. These are delicate parts that need extreme care to solder right. I have lots of laser and other unique stuff for sale this week.
|
|
|
High Power 808nm 50W Coherent FAP Laser Diode Collimator Lens SMA Optic
This is a collimator lens for an 808nm 50W FAP laser diode block. The laser it is used with looks like a gold block with a SMA connector on one end. It will make the beam into a much more manageable spot useful for heat treating and other uses. The optical lens is fine. But the outer casing has some scuffing as pictured. I have lots of laser and other unique stuff for sale this week.
|
|
|
808nm High Power IR Illumination Target Designator Laser Diode Module 500mw Max
This is a module that outputs up to 500mw of 808nm IR light. You can remove the lens for a very efficient IR floodlight for NV gear. Or it can be collimated into a beam for a long range target designator. It can even be used at close range for burning stuff or driving DPSS crystals. Overall it's pretty handy. I have lots of laser and other unique stuff for sale this week.
|
|
|
High Power 50W 808nm Coherent Thermoelectric Laser Diode TEC Cooling Module
This is a laser cooling assembly for a 50W 808nm(or any other) Coherent FAP laser diode. It can cool up to 300W of load to 5 degrees C from room temperature at 25 degrees C. Besides use as a laser cooler it would work nicely to build a small lab refrigerator or cool a fish tank using a few CPU liquid cooler pump and heatsinks. This item is pretty hard to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Coherent 25W 808nm DPSS Pump Burning Cutting Laser Diode Lens Optic
This is a very high quality meniscus lens used for DPSS pumping. It can also be used as a workpiece lens for an industrial cutting/burning laser. It has a FL of about 6mm. And will accept beam diameters of up to 9mm. I used one of these to replace a damaged lens in a small industrial micro-welder, and it worked BETTER than the original lens did when it was new! The optical lens elements in this one were OEM'ed by Coherent, so this is an extreme quality optic! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Thermo Electric Cooler Mount 3w 808nm Nd:Yag YVO4 Pump Laser Diode
This is a neat assembly that emulates an expensive HHL or TO3 laser diode with integral TEC cooling. It has a 3 to 5W C-mount laser diode on top of a nice TEC cooling mount with thermistor feedback. It would be ideal for pumping nd:yag or YVO4 crystals. Also you may remove the IR laser diode and use it for more expensive red laser diodes for light show use. Shown is the 808nm laser diode running at about 2.5A. This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143d3829614-0xf0-
|
|
|
808nm 1-2W High Power Laser Diode Module Head Assembly Industrial Burning Part
This is a nice 808nm 1-2w laser diode in a heatsink/lens assembly. It is tested with 1.3A and burns stuff quite nicely. it went through anti-static foam almost instantly!You must limit the current to use this assembly. It is NOT a complete module, just the diode, lens/heatsink, and leads. Note: THE LASER BEAM IS a BARELY VISIBLE DIM RED, but MY CAMERA SEES IT AS MAGENTA! I have lots of lasers, tubes, and other unique stuff for sale this week.
|
|
|
High Power 10W 808nm Green Nd:YAG YVO4 Laser Diode Collimator Lens Optic
This is the lens used in a high end dpss laser to collimate a 5W pump diode. It could be used with emitters of up to 10W of actual power. Possibly higher, but the lens input diameter is the real limiting factor to power input. The input side is 6.5mm, and the FL is about 3mm. It also has been tested to work very well with high power red laser diodes too. The optical elements in this one were OEM'ed by Coherent, so this is an extreme quality optic! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
810nm 808nm Fiber Optic Laser Diode Photodiode Detector Band Pass Filter Lens
This is a narrow band 810nm +.3nm bandpass interference filter for target designators and long range optical sensors based on laser diode sources. It can also be used for power measurement of IR pump leakage from laser pointers, or as a quick go/no go test for testing surplus so called 808nm laser diodes with. The long wavelength makes the signal to noise ratio very high compared to shorter wavelength lasers for machine vision applications also. It is 1 inch diameter. This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
808nm 25W Thor Labs Spectra Physics Laser Diode Fiber Optic Collimator Lens Inva
This is the ultimate fiber optic collimator lens for high power fiber coupled laser diodes. It has an invar case and a precision AR coated lens that is good for 25W of power. The lens is coated for both a red 635nm aim beam with the peak transmission at 808-815nm. But is usable to about 910nm. The lens is 1/4 inch diameter with the standard SMA style connector on the back. Like any other fiber collimator lens, the smaller the diameter of the fiber the better the collimation will be. I have lots of lasers and other unique stuff for sale this week. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14443f0a505-0xec-
|
|
|
High Power 808nm 60W FAP Coherent Laser Diode 800um SMA Optic Fiber 3 Meter
This is a sma optical fiber that fits the smaller size FAP Coherent lasers with the 800um core. It will work with the Coherent 20W+ gold FAP laser diodes with the 800um core output connector. This was used on a galvo steered laser welder machine. I have the collimator lens that attaches to this fiber in another listing. This item is quite difficult to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power TEC Cooled Red Ir C-mount 808nm 3-7W Laser Diode Mounting Assembly
This is a precision TEC cooled mounting for a c-mout diode. It will work well for diodes up to 7W of optical power. If you have a high power red C-mount diode that you want to keep cool. You need this part! It has thermal sensor feedback too. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Infared IR laser Beam shaping optic Melles Griot Collimator C-mount diode 808nm
High quality mounted IR collimating set multi glass lens and fully coated Posted with
|
|
|
Anamorphic Prism Set works for 445nm thru 808nm
Nice mounted prism set used shape laser diode output. These were made to shape IR laser light but work well on the 445nm lasers as well with only a small ammount of light lost. Posted with
|
|
|
Dilas 40W 808nm Laser Diode Bar CCP 19 Emitter High Power
Dilas 40W 808nm CCP Laser Diode Each conduction-cooled. Single bar diode laser is manufactured to the industry's highest standards, resulting in stable sources with the highest beam quality. Available as free-beam, fast-axis collimated, fully collimated or fiber-coupled modules and in open design or sealed housings, combined with appropriate soft solder or CTE-matched hard-solder technologies. These diodes are lightly used and we have carefully inspected them and tested them to confirm power and wavelength. Each diode comes with a spectral plot and operating current. Specification: CW Output Power: 40W. Center Wavelength: 808nm +/ 3nm at 25C Number of Emitters: 19. Stripe Width: 150um Beam Divergence. Fast Axis(90% Beam Divergence. Slow Axis: Threshold Current: 8A Operating Current: Click for detailed specifications from the manufacturer's ... moreweb site. To see other related items. Be sure to Visit my eBay Store If you like what you see. You can Add Junktronix to your Favorite Sellers List Why Buy From Junktronix? eBay member in good standing since 1996 We specialize in lasers and photonic test equipment and have developed expertise and tools to properly test most of the items we sell All items offered with a 100% Satisfaction Guarantee Payment We always accept payment by PayPal. If your organization does not allow PayPal. Please contact us to arrange payment by credit card or bank wire transfer. California residents will be charged sales tax. Shipping Please use the eBay shipping calculator to determine the carrier and cost for shipping. We ship most items by USPS with no packing or handling charge added. Some heavier or more expensive items will ship by UPS. We can ship by FedEx on request and international delivery by DHL is also available. Please contact us before bidding if you require a different shipping method. Warranty Items listed AS-IS do not include any warranty. Items listed as NEW or USED are guaranteed to arrive in the condition described in the listing. Items which are found to be significantly
|
|
|
Lot of Coherent High Power Laser Diode Parts Chips 0-7W 860nm 808nm
You are bidding on a lot of laser diode chips and parts. There are 7) 860nm? laser diode chips that are rated 5-7W of output- they probably work. But no guarantee on the wavelength. There are 3x 808 chips on sub-mounts rated 2W, they are from 2002 so they might work, but no guarantees. There are also 2x 798nm InGaAs VESCEL lasers that probably DO NOT WORK. If even one item in this lot works well, you are ahead. This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Coherent 808nm 5w Burning Cutting DPSS Nd:YAG Pump Laser Diode Cmount
This is a 808nm laser diode that is good for pumping small Neodymium DPSS lasers. As with any other higher power laser diode it can be used to cut and burn very thin materials. But is best suited for IR illumination, and laser pumping. It is extremely well suited for a potent Night Vision illumination for most commercial grade stuff! This item is pretty hard to find reasonably priced. I have lots of laser and other unique stuff for sale this week.
|
|
|
Coherent High Power Laser Diode 808nm Galvo Welder Mirror Optic Set Matched Pair
This item is a lot of two galvo mirrors that reflect near IR laser diodes used for precision welding and soldering of SMD parts. The mirrors are definitely used with some small traces of glue on them. They are about 1cm square. They have a lot of life left in them. This item is pretty hard to find I have lots of laser and other unique stuff for sale this week.
|
|
|
Large Gold Coherent 808nm 50W Laser Diode Pumped Crystal Optical Assembly YVO4
This is a large dpss lasing crystal in an extremely heavy duty water cooled mounting block. The lasing crystal itself measures 3x3x5mm. And is in a large heavily gold plated mounting block. The mount seemed to be gross overkill until i found out the laser it went to originally made 20+ WATTS of green light output! The crystal ends are in perfect condition, so if you want to build that big scary DPSS laser project you have in mind, but never could afford, this is for you. Side 1 has AR 808nm, HR 1064/532nm, side 2 has AR 1064nm and 532nm. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Coherent High Power Laser Diode Welder FAP Primary Collimation Lens 808nm 60W
This is the primary collimator assembly from a high end DPSS micro welder engraver. This optic collimates the beam from a FAP laser diode. It turns the flashlight like output of these modules into a laser pointer like beam which was then focused onto a DPSS crystal. The lens diameter is about 3/4 inch. Focal length is about 1.5 inches, and the collimated output beam is about 1/2 inch. I have other optical parts from the dpss laser set up on ebay as well. I have lots of laser and other unique stuff for sale this week.
|
|
|
30 Watt Coherent FAP 808nm Diode Array Laser Package
Untested(presumed to be functional) Coherent Fiber Array Package diode laser. We believe that this laser is 808nm and had a design peak power output of 30 Watts. Because they aren't tested(we only test these with their design TEC in operation) We are listing them as"for parts" Use at your own risk, these units are sensitive to ESD.
|
|
|
Coherent 808nm High Power Laser Diode Chip Dies 14 Pieces 1-3W LARGE LOT
This is lot of high power 808nm laser diode chips. These chips are in good condition. You get 14 laser diode chips rated for 3W as pictured. If you can use them you have a great deal on a hard to find item good for DPSS pumping or covert IR illumination! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
12 Watt Coherent FAP 808nm Diode Array Laser Package WORKS,TESTED AND GUARANTEED
Independently tested Coherent Fiber Array Package diode laser. This laser is 808nm and had a design peak power output of 12 Watts. The unit is known to output 11.71 optical watts at a maximum current of 16.0 amps. Because these units are frequently damaged by inexperienced users who don't take ESD. Active cooling and overcurrent precautions we won't accept returns except for doa or out of spec units. Please note that our contracted tester microphotographs the semiconductor materials on these to confirm returned units weren't damaged by user error. If you're not familiar with the operation of laser diodes, these are NOT the unit to get your feet wet with. Use at your own risk, these units are sensitive to ESD and are IR class 4 diode lasers. Your eyes have no blink reflex protection against IR. Nor does flesh or flammable materials. ... moreEye protection, beam stops, and protective gear is MANDATORY.
|
|
|
Coherent 808nm 1000mw High Power 9mm Burning Cutting DPSS YAG Pump Laser Diode
Look at it BURN! This is a 808nm laser diode that is good for pumping small Neodymium DPSS lasers. As with any other higher power laser diode it can be used to cut and burn very thin materials. But is best suited for IR illumination, and laser pumping. It is extremely well suited for a potent Night Vision illumination devices for very long range use! This item is pretty hard to find reasonably priced. I have lots of laser and other unique stuff for sale this week.
|
|
|
CNC Laser Cable. FAP 800 laser combining cable 808nm 18 feet / 5.5 meter long.
Use this cable to deliver powerful laser energy to your work piece. By combining two 40w or 50w FAP-800 lasers for a total of up to 100W. According to the manufacturer. it is a 5 meter cable. Including branch leads it measures approximately 5.5 meters or a little over 18 feet. FAP-800 Laser units NOT included.
|
|
|
Coherent 40W 808nm Laser Diode Bar CCP 19 Emitter High Power DPSS Pump (40-42A)
Coherent 40W 808nm CCP Laser Diode Conductively-cooled diode laser single-bar packages for solid-state pumping. Direct-diode materials processing, medical, reprographics, and illumination applications. Coherent’s industry-leading front, end-technology– including our unique AAA material systems– combine with a portfolio of rugged, high-quality packaging options to produce reliability 20k hours for most products in most applications. PulseLife technology enables reliability of 20k hours even in hard-pulsed ON-OFF applications and enables operation at temperatures as high as 75C. These diodes are in good. Used condition and we have carefully inspected and and tested them to confirm power and wavelength. Each diode comes with a spectral plot and operating current like the one shown in the last picture. This lot all produce the rated 40W output ... moreat a current between 40.5A and 41.9A. Maximum diode current is specified as 46A so these have lots of head room and should have a long life. All diodes have clean, narrow spectrum as well. Check my other listings for less expensive diodes that operate at 42.0- 43.9A. Specification: CW Output Power: 40W. Center Wavelength: 808nm +/ 3nm at 25C Number of Emitters: 19. Stripe Width: 150um Beam Divergence. Fast Axis: 35 deg. Beam Divergence. Slow Axis: Threshold Current: 8A(typical) Operating Current: Click for detailed specifications from the manufacturer's web site. To see other related items. Be sure to Visit my eBay Store If you like what you see. You can Add Junktronix to your Favorite Sellers List Why Buy From Junktronix? eBay member in good standing since 1996 We specialize in lasers and photonic test equipment and have developed expertise and tools to properly test most of the items we sell All items offered with a 100% Satisfaction Guarantee Payment We always accept payment by PayPal. If your organization does not allow PayPal. Please contact us to arrange payment by credit card or bank wire transfer. California residents will be charged sales tax. Shipping Please use
|
|
|
Coherent 50W 808nm FAP Laser Diode TEC Water Cooling Module Heat Sink
This is a heat sink with TEC modules for cooling a 50W FAP laser module. It is unique in that it is water cooled. Though it has enough thermal mass that it can be bolted on an aluminum heat sink as well. Extremely heavy duty part! I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Industrial Coherent Laser Diode 30W 808nm Burning Cutting Beam Gold
This is one of those high power gold laser diodes similar to the one that I offered months ago that was in a miniature precision welding machine. This one however. Came from a really powerful DPSS laser I stripped for parts because the YVO4 was fried. It makes 806nm at 25 deg C which is good for pumping higher power DPSS rods. You can run a little warmer if you want exactly 808nm output for a self-q-switched Yag or similar crystal. It takes about 2.3V at up to 40A to operate and makes an industrial strength burning laser beam out of the lens on the end. Included in the sale is a collimator lens for a welder machine. The lens is removable to use on other similar laser diodes(795-980nm) if you like. These lasers are very hard to find with the matching lens attached. Definitely not something you'll find at Radio shack! I have lots of lasers, ... moretubes, and other unique stuff for sale this week.
|
|
|
High Power Coherent FAC Corrected Laser Diode Bar Collimation Lens 808nm 50W
This is a 1 inch diameter by about 4 inch FL lens used to correct the beam from a FAC corrected laser diode bar to make it into a usable beam for standard delivery to industrial galvo scanners in a micro welding machine. The laser diode bar this lens was used with has a small lens glued on them. In short. It can make the beam from the raw diode like the one in a SP FC bar module behave like a laser poinnter's beam. It can also be used with FAC corrected red laser diodes up to 5W without a problem to make a very nice lightshow beam display laser. This item is very hard to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Spectra Physics 40W 808nm 797nm Laser Diode Bar DPSS Pump Fiber optic coupled
Fiber optic coupled. Split into 2x20W outputs. Removed from working system but the fiber optic ends have damage and need reworked or the fiber assemble replaced or not used. Diode assemble needs to be screwed to a heatsink/cooling system.
|
|
|
10 watt laser diode 10w 808nm 808 nm infrared pump for green laser ktp yvo4 yag
10( Max) watt tested laser.Continuous operation with Active heat sink at 5 watt. also i will add one used 2 watt laser(used only for testing) Please its sensitive device so no returns. Specifications: Optical Wavelength(nm) 808, Wavelength Tolerance(nm) ±3, Operating Power(W) 10, Slope Efficiency(W/A) ≥1.1. Spectral Width FWHM(nm) ≤ 2, Spectral Width FW90%E(nm) ≤ 3, Fast Axis Divergence(90% Degree) 70, Slow Axis Divergence(90% Degree) 10, Wavelength Temp. Coefficient(nm/C) ~0.28, Electrical Threshold Current(A) ≤ 0.8, Power Conversion Efficiency( ≥ 48 Operating Voltage(V) ≤ 2, Operating Current(A) 5.0 ± 0.1, Thermal Operating Temperature(C) 15~35, Storage Temperature(C) 40~60, Recommended Heatsink Capacity(W) ≥ 6, 1. Data at the temperature of 25 degree C. Unless otherwise stated. 2. For fast axis collimation: Divergence o 3. Under ... morenormal operating condition. The lifetime of the diode is 10,000 hours.
|
|
|
20 watt laser diode 808nm peltier tec 300 watt fiber optic Lenz 20w laser head
This is 20 Watt 808 nm Solid State Laser diode With Heat Sink and Peltier Thermoelectric Cooling technology. Laser Diode is tested working and connected to Fiber optic.Peltier Thermoelectric is 250 Watt of cooling operating at 288 watt. Temp sensor is also attached to control feedback to temperature. I also added Lens( Basic Focus L1 lens. Attach Heat sink for Long operation. Operating voltage is 2.2 V for Laser Diode@ 22-26 Amp for 20 Watt output I found following details Parameter Conditions Min Typ Units CW Power Output 26A at 25˚C Heat Sink 20— W Operating Current 20W at 25˚C Heat Sink— 26 A Threshold Current 25˚C Heat Sink— 9 A Slope Efficiency 25˚C Heat Sink— 1.15 W/A Efficiency 20W at 25˚C Heat Sink— 45% Number of Emitters— 46 Emitter Size— 80x1 µm Emitter Pitch— 200 µm Center Wavelength 20W at 25˚C Heat Sink— 808 nm Wavelength ... moreTolerance 20W at 25˚C Heat Sink— +/3 nm Spectral Width 20W at 25˚C Heat Sink— 1.8 nmd
|
|
|
CB01L163Z Line beam 30:35w,808nm (LIMO Wavelength 780-1000nm max.Power 500W)
what you are bidding or buying ONLY 1 psc LEISTER Laser light source USED( CB01L163Z Line beam 30:35w.808nm(LIMO Wavelength 780-1000nm max.Power 500W) CLASS IV LASER PRODUCT Payment: We accept PayPal or Bank transfer or WU Payment must be made within 5 days after the end of auction. Unpaid dispute will be filed to eBay for any non payable bidders. Shipping: We only ship to your confirmed Paypal address. Please make sure your Paypal shipping address is correct before purchase. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. All items shipped with careful packaging to protect and ensure saftey of contents during shipment. Most ... moreorders will be shipped out within 1-2 business days upon payment confirmation. Shipping time: 7-18 days United States.United Kingdom, Australia, Canada, Singapore, New Zealand, Japan, South-Korea. 10-30 days France.Germany,Switzerland,Sweden,Denmark,Belgium,Ireland Terms of Sale: All our items come with one 14 days warranty. Please feel free to contact us if you are not satisfied with the purchase. Contact Us: Negative feedback can not solve anything. If you have any problems. We are very glad to help you. Please allow us to reply your email within 24 hours. Please contact us through ebay message(welcome) or Emai Check out our eBay store for other similar items. amoj1010 Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-147bbcbe0ff-0x111-
|
|
|
Opto Power OPC-A001-FC/100 1w Burns 808nm single emitter fiber coupled
THE FOLLOWING IS FROM Sam's Laser FAQ. Copywrite The first unit I dissected is typical of 0.5 to 1.5 W fiber-coupled diode lasers. Refer to and while reading the following description. WARNING: The output beam of high power laser diodes with an attached microlens(or other collimating optics) is much better collimated than we are used to for laser diodes- closer to that of a"real" laser. The divergence(total at the half power point) is typically 10x4 degrees as opposed to 10x40 degrees for a bare laser diode. What this means is that both the direct beam and any specular reflections are MUCH more dangerous to vision even several feet away from the source. Even the reflection from a shiny IR detector card can be dangerous. This is especially scary for people who have become complacent working with laser diodes being used to beams ... morethat spread out to safe levels in a few inches. The overall package is 1.5"L) x 0.75"W) x 0.5"H) and is made of a block of gold plated brass with a milled cavity. There are red and black wires for power and a single-mode fiber with SMA 905 connector for beam delivery. After prying off the Epoxied lid. The following can be seen: The laser diode is an open heatsink device similar or identical to the Spectra-Physics(now Newport) Prolite SCT open heatsink semiconductor laser. Go to and search for"Prolite SCT" It includes reverse polarity protection in the form of a second laser diode chip wired in parallel with the primary laser diode. It may actually lase if driven with enough current but since it's mounted upside-down and there is only one bonding wire. It would probably fail at a relatively low drive current. The beam also isn't anywhere useful. The heatsink is fastened to the case with a 2-56 cap screw. In between is a metal thermal washer(probably indium, no silicone) Multiple gold bond wires connect the laser diode to a ceramic circuit board just for connections to the external power supply wires(there are no components on the circuit board)
|
|
|
Mounted High Power 808nm 50W Coherent FAP Laser Diode Collimator Lens SMA
Up for grabs is an: Extremely Rare FAP COLLIMATION LENS ASSEMBLY in MOUNT! This is a nicely made lens that screws onto a Coherent 808nm 50W FAP laser diode block or onto a delivery fiber. The laser this is used with looks like a gold block with a SMA connector on one end. It makes it from a flashlight like 60 degree spread to a beam that can be used with normal optics. It will make the beam into a much more manageable spot useful for heat treating and other uses. The base of the lens has scuffing from a failed removal attempt. But it is still usable, the optical surfaces are fine. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Osram high power laser diode array Unique 808nm DPSS 300+ Watt
One of a kind Osram R&D laser array. 8 high power liquid cooled lasers in one array 10mm wide emitters. I have tested each laser diode to as I removed them. They glow nicely but I don't have a driver capable of bringing them up to threshold. They appear to be 808-810nm from years of observing these things but I can't guarantee this. These can be anywhere from 30-100 Watts each. My best guess is 40-50 Watts X 8. Osram currently has nothing like these available on their site. I took it all apart for inspection in an anti-static work station carefully not touching the emitters. And found that there is some residue in the coolant chambers in the diodes as seen in pics. This is worse near one end of the array and gradually dissipates. That must be the hotter exit end. This will not interfere with its function as the residue does not ... moreseem to come off easily. All the emitters are in perfect condition. I inspected under my microscope. There are 3 holes for the coolant. There was an un-tapped hole on each end of the array which didn't seem very functional for the layman. I tapped the hole in the plastic end and added a hose fitting. The opposite end hole is in stainless so I'll leave that up to you to tap if you wish. I inserted a brass tube in there for testing. It's a pretty tight fit. You can remove this with pliers or add a little epoxy around it or figure a way to plug this as there is another hole on the back side. this one came tapped with a screw/plug. But was the same size as my hose fitting so I will include a couple fittings with the unit. I will mark the correct polarity before sending. Thanks for looking
|
|
|
800 mw 808nm Laser - Inferred Laser
800 mw 808 nm Inferred Laser. Includes Driver has about 1 hour total use time. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14a28ca73a5-0x106-
|
|
|
Coherent 40W 808nm Laser Diode Bar 19-Emitter DPSS Pump High Power / Warranty
Payment Policy New Page 2 Brand New Sony CyberShot 8 MP Di Coherent 40W 808nm Laser Diode Bar 19-Emitter DPSS Pump High Power/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Coherent 40W 808nm Laser Diode Bar 19-Emitter DPSS Pump High Power/ Warranty Used Condition Part No. 1057693 Fast/ Safe/ Free Domestic Shipping Coherent 40-Watt 808nm Conduction Cooled Diode CCP Single-Bar Package for Solid-State Pumping. Medical, illumination, Direct-Diode Material Processing, Barning, Cutting, Reprographics and etc. CW Output Power: 30W- 40W Wave length: 808nm Inventory Number: 3J93497-01-14 Item Condition Used Condition Fast/ Safe/ Free ... moreDomestic Shipping Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping&
|
|
|
Pair of lens coated for 808nm laser. From B&W TEK 473nm laser head.
Hello, Here for sale: Pair of lens coated for 808nm laser. From B&W TEK 473nm laser head. Used condition. This auction includes: One used pair of lens coated for 808nm laser. From B&W TEK 473nm laser head. LOW STARTING PRICE! Please pay via PayPal within 3 days after end of auction or contact me for details. Please look carefully pictures. All sales are final. AS IS. NO returns NO refunds. The buyer pays item and shipping cost. The buyer pays all import duties. I will ship internationally via AIRMAIL SMALL PACKET $10. Thanks for looking)
|
|
|
Lot 4 Coherent 40W 808nm Laser Diode Bar Cutting Burning High Power / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Lot 4 Coherent 40W 808nm Laser Diode Bar Cutting Burning High Power/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Lot 4 Coherent 40W 808nm Laser Diode Bar Cutting Burning High Power/ Warranty Used Condition Fast/ Safe/ Free Domestic Shipping Lot of 4 Coherent 40W 808nm Laser Diode Single-Bar Packages Part No. 1057693 Lot of 4 Coherent 40Watts 19-Emitter DPSS Solid-State Pumping Conductively Cooled CCP Laser Diode Bar Modules INV# 20F72482-1-15 Item Condition Used Condition Fast/ Safe/ Free Domestic Shipping Actual Picture of the item is provided. What you see in the picture(s) ... moreis what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. H
|
|
 |